[deliverable/linux.git] / drivers / iio / light / Kconfig

#
# Light sensors
#
# When adding new entries keep the list in alphabetical order

menu "Light sensors"

config ADJD_S311
	tristate "ADJD-S311-CR999 digital color sensor"
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	depends on I2C
	help
	 If you say yes here you get support for the Avago ADJD-S311-CR999
	 digital color light sensor.

	 This driver can also be built as a module.  If so, the module
	 will be called adjd_s311.

config AL3320A
	tristate "AL3320A ambient light sensor"
	depends on I2C
	help
	 Say Y here if you want to build a driver for the Dyna Image AL3320A
	 ambient light sensor.

	 To compile this driver as a module, choose M here: the
	 module will be called al3320a.

config APDS9300
	tristate "APDS9300 ambient light sensor"
	depends on I2C
	help
	 Say Y here if you want to build a driver for the Avago APDS9300
	 ambient light sensor.

	 To compile this driver as a module, choose M here: the
	 module will be called apds9300.

config CM32181
	depends on I2C
	tristate "CM32181 driver"
	help
	 Say Y here if you use cm32181.
	 This option enables ambient light sensor using
	 Capella cm32181 device driver.

	 To compile this driver as a module, choose M here:
	 the module will be called cm32181.

config CM36651
	depends on I2C
	tristate "CM36651 driver"
	help
	 Say Y here if you use cm36651.
	 This option enables proximity & RGB sensor using
	 Capella cm36651 device driver.

	 To compile this driver as a module, choose M here:
	 the module will be called cm36651.

config GP2AP020A00F
	tristate "Sharp GP2AP020A00F Proximity/ALS sensor"
	depends on I2C
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	select IRQ_WORK
	help
	  Say Y here if you have a Sharp GP2AP020A00F proximity/ALS combo-chip
	  hooked to an I2C bus.

	  To compile this driver as a module, choose M here: the
	  module will be called gp2ap020a00f.

config ISL29125
	tristate "Intersil ISL29125 digital color light sensor"
	depends on I2C
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	help
	  Say Y here if you want to build a driver for the Intersil ISL29125
	  RGB light sensor for I2C.

	  To compile this driver as a module, choose M here: the module will be
	  called isl29125.

config HID_SENSOR_ALS
	depends on HID_SENSOR_HUB
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	select HID_SENSOR_IIO_COMMON
	select HID_SENSOR_IIO_TRIGGER
	tristate "HID ALS"
	help
	  Say yes here to build support for the HID SENSOR
	  Ambient light sensor.

config HID_SENSOR_PROX
	depends on HID_SENSOR_HUB
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	select HID_SENSOR_IIO_COMMON
	select HID_SENSOR_IIO_TRIGGER
	tristate "HID PROX"
	help
	  Say yes here to build support for the HID SENSOR
	  Proximity sensor.

	  To compile this driver as a module, choose M here: the
	  module will be called hid-sensor-prox.

config JSA1212
	tristate "JSA1212 ALS and proximity sensor driver"
	depends on I2C
	help
	 Say Y here if you want to build a IIO driver for JSA1212
	 proximity & ALS sensor device.

	 To compile this driver as a module, choose M here:
	 the module will be called jsa1212.

config SENSORS_LM3533
	tristate "LM3533 ambient light sensor"
	depends on MFD_LM3533
	help
	  If you say yes here you get support for the ambient light sensor
	  interface on National Semiconductor / TI LM3533 Lighting Power
	  chips.

	  The sensor interface can be used to control the LEDs and backlights
	  of the chip through defining five light zones and three sets of
	  corresponding output-current values.

	  The driver provides raw and mean adc readings along with the current
	  light zone through sysfs. A threshold event can be generated on zone
	  changes. The ALS-control output values can be set per zone for the
	  three current output channels.

config LTR501
	tristate "LTR-501ALS-01 light sensor"
	depends on I2C
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	help
	 If you say yes here you get support for the Lite-On LTR-501ALS-01
	 ambient light and proximity sensor.

	 This driver can also be built as a module.  If so, the module
         will be called ltr501.

config TCS3414
	tristate "TAOS TCS3414 digital color sensor"
	depends on I2C
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	help
	 If you say yes here you get support for the TAOS TCS3414
	 family of digital color sensors.

	 This driver can also be built as a module.  If so, the module
	 will be called tcs3414.

config TCS3472
	tristate "TAOS TCS3472 color light-to-digital converter"
	depends on I2C
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	help
	 If you say yes here you get support for the TAOS TCS3472
	 family of color light-to-digital converters with IR filter.

	 This driver can also be built as a module.  If so, the module
	 will be called tcs3472.

config SENSORS_TSL2563
	tristate "TAOS TSL2560, TSL2561, TSL2562 and TSL2563 ambient light sensors"
	depends on I2C
	help
	 If you say yes here you get support for the Taos TSL2560,
	 TSL2561, TSL2562 and TSL2563 ambient light sensors.

	 This driver can also be built as a module.  If so, the module
	 will be called tsl2563.

config TSL4531
	tristate "TAOS TSL4531 ambient light sensors"
	depends on I2C
	help
	 Say Y here if you want to build a driver for the TAOS TSL4531 family
	 of ambient light sensors with direct lux output.

	 To compile this driver as a module, choose M here: the
	 module will be called tsl4531.

config VCNL4000
	tristate "VCNL4000 combined ALS and proximity sensor"
	depends on I2C
	help
	 Say Y here if you want to build a driver for the Vishay VCNL4000
	 combined ambient light and proximity sensor.

	 To compile this driver as a module, choose M here: the
	 module will be called vcnl4000.

endmenu
Commit	Line	Data
9c8ea1b2 JH	1	#
	2	# Light sensors
	3	#
3edc84e6 LPC	4	# When adding new entries keep the list in alphabetical order
3edc84e6 LPC	5
9c8ea1b2 JH	6	menu "Light sensors"
9c8ea1b2 JH	7
bbdb822c PM	8	config ADJD_S311
	9	tristate "ADJD-S311-CR999 digital color sensor"
	10	select IIO_BUFFER
	11	select IIO_TRIGGERED_BUFFER
	12	depends on I2C
	13	help
	14	If you say yes here you get support for the Avago ADJD-S311-CR999
	15	digital color light sensor.
	16
	17	This driver can also be built as a module. If so, the module
	18	will be called adjd_s311.
	19
f007d7f1 DB	20	config AL3320A
	21	tristate "AL3320A ambient light sensor"
	22	depends on I2C
	23	help
	24	Say Y here if you want to build a driver for the Dyna Image AL3320A
	25	ambient light sensor.
	26
	27	To compile this driver as a module, choose M here: the
	28	module will be called al3320a.
	29
03eff7b6 OK	30	config APDS9300
	31	tristate "APDS9300 ambient light sensor"
	32	depends on I2C
	33	help
	34	Say Y here if you want to build a driver for the Avago APDS9300
	35	ambient light sensor.
	36
	37	To compile this driver as a module, choose M here: the
	38	module will be called apds9300.
	39
971672c0 KT	40	config CM32181
	41	depends on I2C
	42	tristate "CM32181 driver"
	43	help
	44	Say Y here if you use cm32181.
	45	This option enables ambient light sensor using
	46	Capella cm32181 device driver.
	47
	48	To compile this driver as a module, choose M here:
	49	the module will be called cm32181.
	50
e590d451 BS	51	config CM36651
	52	depends on I2C
	53	tristate "CM36651 driver"
	54	help
	55	Say Y here if you use cm36651.
	56	This option enables proximity & RGB sensor using
	57	Capella cm36651 device driver.
	58
	59	To compile this driver as a module, choose M here:
	60	the module will be called cm36651.
	61
bf29fbea JA	62	config GP2AP020A00F
	63	tristate "Sharp GP2AP020A00F Proximity/ALS sensor"
	64	depends on I2C
	65	select IIO_BUFFER
	66	select IIO_TRIGGERED_BUFFER
419a4aae	67	select IRQ_WORK
bf29fbea JA	68	help
	69	Say Y here if you have a Sharp GP2AP020A00F proximity/ALS combo-chip
	70	hooked to an I2C bus.
	71
	72	To compile this driver as a module, choose M here: the
	73	module will be called gp2ap020a00f.
	74
6c25539c PM	75	config ISL29125
	76	tristate "Intersil ISL29125 digital color light sensor"
	77	depends on I2C
	78	select IIO_BUFFER
	79	select IIO_TRIGGERED_BUFFER
	80	help
	81	Say Y here if you want to build a driver for the Intersil ISL29125
	82	RGB light sensor for I2C.
	83
	84	To compile this driver as a module, choose M here: the module will be
	85	called isl29125.
	86
3edc84e6 LPC	87	config HID_SENSOR_ALS
	88	depends on HID_SENSOR_HUB
	89	select IIO_BUFFER
	90	select IIO_TRIGGERED_BUFFER
	91	select HID_SENSOR_IIO_COMMON
	92	select HID_SENSOR_IIO_TRIGGER
	93	tristate "HID ALS"
	94	help
	95	Say yes here to build support for the HID SENSOR
	96	Ambient light sensor.
	97
39a3a013 AP	98	config HID_SENSOR_PROX
	99	depends on HID_SENSOR_HUB
	100	select IIO_BUFFER
	101	select IIO_TRIGGERED_BUFFER
	102	select HID_SENSOR_IIO_COMMON
	103	select HID_SENSOR_IIO_TRIGGER
	104	tristate "HID PROX"
	105	help
	106	Say yes here to build support for the HID SENSOR
	107	Proximity sensor.
	108
	109	To compile this driver as a module, choose M here: the
	110	module will be called hid-sensor-prox.
	111
995863cc KS	112	config JSA1212
	113	tristate "JSA1212 ALS and proximity sensor driver"
	114	depends on I2C
	115	help
	116	Say Y here if you want to build a IIO driver for JSA1212
	117	proximity & ALS sensor device.
	118
	119	To compile this driver as a module, choose M here:
	120	the module will be called jsa1212.
	121
9c8ea1b2 JH	122	config SENSORS_LM3533
	123	tristate "LM3533 ambient light sensor"
	124	depends on MFD_LM3533
	125	help
	126	If you say yes here you get support for the ambient light sensor
	127	interface on National Semiconductor / TI LM3533 Lighting Power
	128	chips.
	129
	130	The sensor interface can be used to control the LEDs and backlights
	131	of the chip through defining five light zones and three sets of
	132	corresponding output-current values.
	133
	134	The driver provides raw and mean adc readings along with the current
	135	light zone through sysfs. A threshold event can be generated on zone
	136	changes. The ALS-control output values can be set per zone for the
	137	three current output channels.
62a1efb9	138
2690be90 PM	139	config LTR501
	140	tristate "LTR-501ALS-01 light sensor"
	141	depends on I2C
	142	select IIO_BUFFER
	143	select IIO_TRIGGERED_BUFFER
	144	help
	145	If you say yes here you get support for the Lite-On LTR-501ALS-01
	146	ambient light and proximity sensor.
	147
	148	This driver can also be built as a module. If so, the module
	149	will be called ltr501.
	150
a244e7b5 PM	151	config TCS3414
	152	tristate "TAOS TCS3414 digital color sensor"
	153	depends on I2C
	154	select IIO_BUFFER
	155	select IIO_TRIGGERED_BUFFER
	156	help
	157	If you say yes here you get support for the TAOS TCS3414
	158	family of digital color sensors.
	159
	160	This driver can also be built as a module. If so, the module
	161	will be called tcs3414.
	162
eb869ade PM	163	config TCS3472
	164	tristate "TAOS TCS3472 color light-to-digital converter"
	165	depends on I2C
089b54bd PM	166	select IIO_BUFFER
089b54bd PM	167	select IIO_TRIGGERED_BUFFER
eb869ade PM	168	help
	169	If you say yes here you get support for the TAOS TCS3472
	170	family of color light-to-digital converters with IR filter.
	171
	172	This driver can also be built as a module. If so, the module
	173	will be called tcs3472.
	174
9c2251dd JC	175	config SENSORS_TSL2563
	176	tristate "TAOS TSL2560, TSL2561, TSL2562 and TSL2563 ambient light sensors"
	177	depends on I2C
	178	help
	179	If you say yes here you get support for the Taos TSL2560,
	180	TSL2561, TSL2562 and TSL2563 ambient light sensors.
	181
	182	This driver can also be built as a module. If so, the module
	183	will be called tsl2563.
	184
aab9ba7e PM	185	config TSL4531
	186	tristate "TAOS TSL4531 ambient light sensors"
	187	depends on I2C
	188	help
	189	Say Y here if you want to build a driver for the TAOS TSL4531 family
	190	of ambient light sensors with direct lux output.
	191
	192	To compile this driver as a module, choose M here: the
	193	module will be called tsl4531.
	194
62a1efb9 PM	195	config VCNL4000
	196	tristate "VCNL4000 combined ALS and proximity sensor"
	197	depends on I2C
	198	help
	199	Say Y here if you want to build a driver for the Vishay VCNL4000
	200	combined ambient light and proximity sensor.
	201
	202	To compile this driver as a module, choose M here: the
	203	module will be called vcnl4000.
	204
9c8ea1b2	205	endmenu