[deliverable/linux.git] / drivers / input / touchscreen / mtouch.c

/*
 * MicroTouch (3M) serial touchscreen driver
 *
 * Copyright (c) 2004 Vojtech Pavlik
 */

/*
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License version 2 as published by
 * the Free Software Foundation.
 */

/*
 * 2005/02/19 Dan Streetman <ddstreet@ieee.org>
 *   Copied elo.c and edited for MicroTouch protocol
 */

#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/input.h>
#include <linux/serio.h>
#include <linux/init.h>

#define DRIVER_DESC	"MicroTouch serial touchscreen driver"

MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");

/*
 * Definitions & global arrays.
 */

#define MTOUCH_FORMAT_TABLET_STATUS_BIT 0x80
#define MTOUCH_FORMAT_TABLET_TOUCH_BIT 0x40
#define MTOUCH_FORMAT_TABLET_LENGTH 5
#define MTOUCH_RESPONSE_BEGIN_BYTE 0x01
#define MTOUCH_RESPONSE_END_BYTE 0x0d

/* todo: check specs for max length of all responses */
#define MTOUCH_MAX_LENGTH 16

#define MTOUCH_MIN_XC 0
#define MTOUCH_MAX_XC 0x3fff
#define MTOUCH_MIN_YC 0
#define MTOUCH_MAX_YC 0x3fff

#define MTOUCH_GET_XC(data) (((data[2])<<7) | data[1])
#define MTOUCH_GET_YC(data) (((data[4])<<7) | data[3])
#define MTOUCH_GET_TOUCHED(data) (MTOUCH_FORMAT_TABLET_TOUCH_BIT & data[0])

/*
 * Per-touchscreen data.
 */

struct mtouch {
	struct input_dev *dev;
	struct serio *serio;
	int idx;
	unsigned char data[MTOUCH_MAX_LENGTH];
	char phys[32];
};

static void mtouch_process_format_tablet(struct mtouch *mtouch)
{
	struct input_dev *dev = mtouch->dev;

	if (MTOUCH_FORMAT_TABLET_LENGTH == ++mtouch->idx) {
		input_report_abs(dev, ABS_X, MTOUCH_GET_XC(mtouch->data));
		input_report_abs(dev, ABS_Y, MTOUCH_MAX_YC - MTOUCH_GET_YC(mtouch->data));
		input_report_key(dev, BTN_TOUCH, MTOUCH_GET_TOUCHED(mtouch->data));
		input_sync(dev);

		mtouch->idx = 0;
	}
}

static void mtouch_process_response(struct mtouch *mtouch)
{
	if (MTOUCH_RESPONSE_END_BYTE == mtouch->data[mtouch->idx++]) {
		/* FIXME - process response */
		mtouch->idx = 0;
	} else if (MTOUCH_MAX_LENGTH == mtouch->idx) {
		printk(KERN_ERR "mtouch.c: too many response bytes\n");
		mtouch->idx = 0;
	}
}

static irqreturn_t mtouch_interrupt(struct serio *serio,
		unsigned char data, unsigned int flags)
{
	struct mtouch* mtouch = serio_get_drvdata(serio);

	mtouch->data[mtouch->idx] = data;

	if (MTOUCH_FORMAT_TABLET_STATUS_BIT & mtouch->data[0])
		mtouch_process_format_tablet(mtouch);
	else if (MTOUCH_RESPONSE_BEGIN_BYTE == mtouch->data[0])
		mtouch_process_response(mtouch);
	else
		printk(KERN_DEBUG "mtouch.c: unknown/unsynchronized data from device, byte %x\n",mtouch->data[0]);

	return IRQ_HANDLED;
}

/*
 * mtouch_disconnect() is the opposite of mtouch_connect()
 */

static void mtouch_disconnect(struct serio *serio)
{
	struct mtouch* mtouch = serio_get_drvdata(serio);

	input_get_device(mtouch->dev);
	input_unregister_device(mtouch->dev);
	serio_close(serio);
	serio_set_drvdata(serio, NULL);
	input_put_device(mtouch->dev);
	kfree(mtouch);
}

/*
 * mtouch_connect() is the routine that is called when someone adds a
 * new serio device that supports MicroTouch (Format Tablet) protocol and registers it as
 * an input device.
 */

static int mtouch_connect(struct serio *serio, struct serio_driver *drv)
{
	struct mtouch *mtouch;
	struct input_dev *input_dev;
	int err;

	mtouch = kzalloc(sizeof(struct mtouch), GFP_KERNEL);
	input_dev = input_allocate_device();
	if (!mtouch || !input_dev) {
		err = -ENOMEM;
		goto fail1;
	}

	mtouch->serio = serio;
	mtouch->dev = input_dev;
	snprintf(mtouch->phys, sizeof(mtouch->phys), "%s/input0", serio->phys);

	input_dev->name = "MicroTouch Serial TouchScreen";
	input_dev->phys = mtouch->phys;
	input_dev->id.bustype = BUS_RS232;
	input_dev->id.vendor = SERIO_MICROTOUCH;
	input_dev->id.product = 0;
	input_dev->id.version = 0x0100;
	input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
	input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
	input_set_abs_params(mtouch->dev, ABS_X, MTOUCH_MIN_XC, MTOUCH_MAX_XC, 0, 0);
	input_set_abs_params(mtouch->dev, ABS_Y, MTOUCH_MIN_YC, MTOUCH_MAX_YC, 0, 0);

	serio_set_drvdata(serio, mtouch);

	err = serio_open(serio, drv);
	if (err)
		goto fail2;

	err = input_register_device(mtouch->dev);
	if (err)
		goto fail3;

	return 0;

 fail3:	serio_close(serio);
 fail2:	serio_set_drvdata(serio, NULL);
 fail1:	input_free_device(input_dev);
	kfree(mtouch);
	return err;
}

/*
 * The serio driver structure.
 */

static struct serio_device_id mtouch_serio_ids[] = {
	{
		.type	= SERIO_RS232,
		.proto	= SERIO_MICROTOUCH,
		.id	= SERIO_ANY,
		.extra	= SERIO_ANY,
	},
	{ 0 }
};

MODULE_DEVICE_TABLE(serio, mtouch_serio_ids);

static struct serio_driver mtouch_drv = {
	.driver		= {
		.name	= "mtouch",
	},
	.description	= DRIVER_DESC,
	.id_table	= mtouch_serio_ids,
	.interrupt	= mtouch_interrupt,
	.connect	= mtouch_connect,
	.disconnect	= mtouch_disconnect,
};

/*
 * The functions for inserting/removing us as a module.
 */

static int __init mtouch_init(void)
{
	return serio_register_driver(&mtouch_drv);
}

static void __exit mtouch_exit(void)
{
	serio_unregister_driver(&mtouch_drv);
}

module_init(mtouch_init);
module_exit(mtouch_exit);
Commit	Line	Data
1da177e4 LT	1	/*
	2	* MicroTouch (3M) serial touchscreen driver
	3	*
	4	* Copyright (c) 2004 Vojtech Pavlik
	5	*/
	6
	7	/*
	8	* This program is free software; you can redistribute it and/or modify it
	9	* under the terms of the GNU General Public License version 2 as published by
	10	* the Free Software Foundation.
	11	*/
	12
	13	/*
	14	* 2005/02/19 Dan Streetman <ddstreet@ieee.org>
	15	* Copied elo.c and edited for MicroTouch protocol
	16	*/
	17
	18	#include <linux/errno.h>
	19	#include <linux/kernel.h>
	20	#include <linux/module.h>
	21	#include <linux/slab.h>
	22	#include <linux/input.h>
	23	#include <linux/serio.h>
	24	#include <linux/init.h>
	25
	26	#define DRIVER_DESC "MicroTouch serial touchscreen driver"
	27
	28	MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
	29	MODULE_DESCRIPTION(DRIVER_DESC);
	30	MODULE_LICENSE("GPL");
	31
	32	/*
	33	* Definitions & global arrays.
	34	*/
	35
	36	#define MTOUCH_FORMAT_TABLET_STATUS_BIT 0x80
	37	#define MTOUCH_FORMAT_TABLET_TOUCH_BIT 0x40
	38	#define MTOUCH_FORMAT_TABLET_LENGTH 5
	39	#define MTOUCH_RESPONSE_BEGIN_BYTE 0x01
	40	#define MTOUCH_RESPONSE_END_BYTE 0x0d
	41
	42	/* todo: check specs for max length of all responses */
	43	#define MTOUCH_MAX_LENGTH 16
	44
	45	#define MTOUCH_MIN_XC 0
	46	#define MTOUCH_MAX_XC 0x3fff
	47	#define MTOUCH_MIN_YC 0
	48	#define MTOUCH_MAX_YC 0x3fff
	49
	50	#define MTOUCH_GET_XC(data) (((data[2])<<7) \| data[1])
	51	#define MTOUCH_GET_YC(data) (((data[4])<<7) \| data[3])
	52	#define MTOUCH_GET_TOUCHED(data) (MTOUCH_FORMAT_TABLET_TOUCH_BIT & data[0])
	53
1da177e4 LT	54	/*
	55	* Per-touchscreen data.
	56	*/
	57
	58	struct mtouch {
eca1ed19	59	struct input_dev *dev;
1da177e4 LT	60	struct serio *serio;
	61	int idx;
	62	unsigned char data[MTOUCH_MAX_LENGTH];
	63	char phys[32];
	64	};
	65
7d12e780	66	static void mtouch_process_format_tablet(struct mtouch *mtouch)
1da177e4	67	{
eca1ed19	68	struct input_dev *dev = mtouch->dev;
1da177e4 LT	69
1da177e4 LT	70	if (MTOUCH_FORMAT_TABLET_LENGTH == ++mtouch->idx) {
1da177e4 LT	71	input_report_abs(dev, ABS_X, MTOUCH_GET_XC(mtouch->data));
	72	input_report_abs(dev, ABS_Y, MTOUCH_MAX_YC - MTOUCH_GET_YC(mtouch->data));
	73	input_report_key(dev, BTN_TOUCH, MTOUCH_GET_TOUCHED(mtouch->data));
	74	input_sync(dev);
	75
	76	mtouch->idx = 0;
	77	}
	78	}
	79
7d12e780	80	static void mtouch_process_response(struct mtouch *mtouch)
1da177e4 LT	81	{
	82	if (MTOUCH_RESPONSE_END_BYTE == mtouch->data[mtouch->idx++]) {
	83	/* FIXME - process response */
	84	mtouch->idx = 0;
	85	} else if (MTOUCH_MAX_LENGTH == mtouch->idx) {
	86	printk(KERN_ERR "mtouch.c: too many response bytes\n");
	87	mtouch->idx = 0;
	88	}
	89	}
	90
	91	static irqreturn_t mtouch_interrupt(struct serio *serio,
7d12e780	92	unsigned char data, unsigned int flags)
1da177e4 LT	93	{
	94	struct mtouch* mtouch = serio_get_drvdata(serio);
	95
	96	mtouch->data[mtouch->idx] = data;
	97
	98	if (MTOUCH_FORMAT_TABLET_STATUS_BIT & mtouch->data[0])
7d12e780	99	mtouch_process_format_tablet(mtouch);
1da177e4	100	else if (MTOUCH_RESPONSE_BEGIN_BYTE == mtouch->data[0])
7d12e780	101	mtouch_process_response(mtouch);
1da177e4 LT	102	else
	103	printk(KERN_DEBUG "mtouch.c: unknown/unsynchronized data from device, byte %x\n",mtouch->data[0]);
	104
	105	return IRQ_HANDLED;
	106	}
	107
	108	/*
	109	* mtouch_disconnect() is the opposite of mtouch_connect()
	110	*/
	111
	112	static void mtouch_disconnect(struct serio *serio)
	113	{
	114	struct mtouch* mtouch = serio_get_drvdata(serio);
	115
eca1ed19 DT	116	input_get_device(mtouch->dev);
eca1ed19 DT	117	input_unregister_device(mtouch->dev);
1da177e4 LT	118	serio_close(serio);
1da177e4 LT	119	serio_set_drvdata(serio, NULL);
eca1ed19	120	input_put_device(mtouch->dev);
1da177e4 LT	121	kfree(mtouch);
	122	}
	123
	124	/*
	125	* mtouch_connect() is the routine that is called when someone adds a
	126	* new serio device that supports MicroTouch (Format Tablet) protocol and registers it as
	127	* an input device.
	128	*/
	129
	130	static int mtouch_connect(struct serio serio, struct serio_driver drv)
	131	{
	132	struct mtouch *mtouch;
eca1ed19	133	struct input_dev *input_dev;
1da177e4 LT	134	int err;
1da177e4 LT	135
eca1ed19 DT	136	mtouch = kzalloc(sizeof(struct mtouch), GFP_KERNEL);
	137	input_dev = input_allocate_device();
	138	if (!mtouch \|\| !input_dev) {
	139	err = -ENOMEM;
52c1f570	140	goto fail1;
eca1ed19	141	}
1da177e4 LT	142
1da177e4 LT	143	mtouch->serio = serio;
eca1ed19	144	mtouch->dev = input_dev;
a21466cc	145	snprintf(mtouch->phys, sizeof(mtouch->phys), "%s/input0", serio->phys);
1da177e4	146
eca1ed19 DT	147	input_dev->name = "MicroTouch Serial TouchScreen";
	148	input_dev->phys = mtouch->phys;
	149	input_dev->id.bustype = BUS_RS232;
	150	input_dev->id.vendor = SERIO_MICROTOUCH;
	151	input_dev->id.product = 0;
	152	input_dev->id.version = 0x0100;
	153	input_dev->evbit[0] = BIT(EV_KEY) \| BIT(EV_ABS);
	154	input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
	155	input_set_abs_params(mtouch->dev, ABS_X, MTOUCH_MIN_XC, MTOUCH_MAX_XC, 0, 0);
	156	input_set_abs_params(mtouch->dev, ABS_Y, MTOUCH_MIN_YC, MTOUCH_MAX_YC, 0, 0);
1da177e4 LT	157
	158	serio_set_drvdata(serio, mtouch);
	159
	160	err = serio_open(serio, drv);
eca1ed19	161	if (err)
52c1f570	162	goto fail2;
1da177e4	163
52c1f570 DT	164	err = input_register_device(mtouch->dev);
	165	if (err)
	166	goto fail3;
1da177e4 LT	167
1da177e4 LT	168	return 0;
eca1ed19	169
52c1f570 DT	170	fail3: serio_close(serio);
	171	fail2: serio_set_drvdata(serio, NULL);
	172	fail1: input_free_device(input_dev);
eca1ed19 DT	173	kfree(mtouch);
eca1ed19 DT	174	return err;
1da177e4 LT	175	}
	176
	177	/*
	178	* The serio driver structure.
	179	*/
	180
	181	static struct serio_device_id mtouch_serio_ids[] = {
	182	{
	183	.type = SERIO_RS232,
	184	.proto = SERIO_MICROTOUCH,
	185	.id = SERIO_ANY,
	186	.extra = SERIO_ANY,
	187	},
	188	{ 0 }
	189	};
	190
	191	MODULE_DEVICE_TABLE(serio, mtouch_serio_ids);
	192
	193	static struct serio_driver mtouch_drv = {
	194	.driver = {
	195	.name = "mtouch",
	196	},
	197	.description = DRIVER_DESC,
	198	.id_table = mtouch_serio_ids,
	199	.interrupt = mtouch_interrupt,
	200	.connect = mtouch_connect,
	201	.disconnect = mtouch_disconnect,
	202	};
	203
	204	/*
	205	* The functions for inserting/removing us as a module.
	206	*/
	207
	208	static int __init mtouch_init(void)
	209	{
153a9df0	210	return serio_register_driver(&mtouch_drv);
1da177e4 LT	211	}
	212
	213	static void __exit mtouch_exit(void)
	214	{
	215	serio_unregister_driver(&mtouch_drv);
	216	}
	217
	218	module_init(mtouch_init);
	219	module_exit(mtouch_exit);