[deliverable/linux.git] / drivers / leds / leds-lm3530.c

/*
 * Copyright (C) 2011 ST-Ericsson SA.
 * Copyright (C) 2009 Motorola, Inc.
 *
 * License Terms: GNU General Public License v2
 *
 * Simple driver for National Semiconductor LM3530 Backlight driver chip
 *
 * Author: Shreshtha Kumar SAHU <shreshthakumar.sahu@stericsson.com>
 * based on leds-lm3530.c by Dan Murphy <D.Murphy@motorola.com>
 */

#include <linux/i2c.h>
#include <linux/leds.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/input.h>
#include <linux/led-lm3530.h>
#include <linux/types.h>

#define LM3530_LED_DEV "lcd-backlight"
#define LM3530_NAME "lm3530-led"

#define LM3530_GEN_CONFIG		0x10
#define LM3530_ALS_CONFIG		0x20
#define LM3530_BRT_RAMP_RATE		0x30
#define LM3530_ALS_ZONE_REG		0x40
#define LM3530_ALS_IMP_SELECT		0x41
#define LM3530_BRT_CTRL_REG		0xA0
#define LM3530_ALS_ZB0_REG		0x60
#define LM3530_ALS_ZB1_REG		0x61
#define LM3530_ALS_ZB2_REG		0x62
#define LM3530_ALS_ZB3_REG		0x63
#define LM3530_ALS_Z0T_REG		0x70
#define LM3530_ALS_Z1T_REG		0x71
#define LM3530_ALS_Z2T_REG		0x72
#define LM3530_ALS_Z3T_REG		0x73
#define LM3530_ALS_Z4T_REG		0x74
#define LM3530_REG_MAX			15

/* General Control Register */
#define LM3530_EN_I2C_SHIFT		(0)
#define LM3530_RAMP_LAW_SHIFT		(1)
#define LM3530_MAX_CURR_SHIFT		(2)
#define LM3530_EN_PWM_SHIFT		(5)
#define LM3530_PWM_POL_SHIFT		(6)
#define LM3530_EN_PWM_SIMPLE_SHIFT	(7)

#define LM3530_ENABLE_I2C		(1 << LM3530_EN_I2C_SHIFT)
#define LM3530_ENABLE_PWM		(1 << LM3530_EN_PWM_SHIFT)
#define LM3530_POL_LOW			(1 << LM3530_PWM_POL_SHIFT)
#define LM3530_ENABLE_PWM_SIMPLE	(1 << LM3530_EN_PWM_SIMPLE_SHIFT)

/* ALS Config Register Options */
#define LM3530_ALS_AVG_TIME_SHIFT	(0)
#define LM3530_EN_ALS_SHIFT		(3)
#define LM3530_ALS_SEL_SHIFT		(5)

#define LM3530_ENABLE_ALS		(3 << LM3530_EN_ALS_SHIFT)

/* Brightness Ramp Rate Register */
#define LM3530_BRT_RAMP_FALL_SHIFT	(0)
#define LM3530_BRT_RAMP_RISE_SHIFT	(3)

/* ALS Resistor Select */
#define LM3530_ALS1_IMP_SHIFT		(0)
#define LM3530_ALS2_IMP_SHIFT		(4)

/* Zone Boundary Register defaults */
#define LM3530_DEF_ZB_0			(0x33)
#define LM3530_DEF_ZB_1			(0x66)
#define LM3530_DEF_ZB_2			(0x99)
#define LM3530_DEF_ZB_3			(0xCC)

/* Zone Target Register defaults */
#define LM3530_DEF_ZT_0			(0x19)
#define LM3530_DEF_ZT_1			(0x33)
#define LM3530_DEF_ZT_2			(0x4C)
#define LM3530_DEF_ZT_3			(0x66)
#define LM3530_DEF_ZT_4			(0x7F)

struct lm3530_mode_map {
	const char *mode;
	enum lm3530_mode mode_val;
};

static struct lm3530_mode_map mode_map[] = {
	{ "man", LM3530_BL_MODE_MANUAL },
	{ "als", LM3530_BL_MODE_ALS },
	{ "pwm", LM3530_BL_MODE_PWM },
};

/**
 * struct lm3530_data
 * @led_dev: led class device
 * @client: i2c client
 * @pdata: LM3530 platform data
 * @mode: mode of operation - manual, ALS, PWM
 */
struct lm3530_data {
	struct led_classdev led_dev;
	struct i2c_client *client;
	struct lm3530_platform_data *pdata;
	enum lm3530_mode mode;
};

static const u8 lm3530_reg[LM3530_REG_MAX] = {
	LM3530_GEN_CONFIG,
	LM3530_ALS_CONFIG,
	LM3530_BRT_RAMP_RATE,
	LM3530_ALS_ZONE_REG,
	LM3530_ALS_IMP_SELECT,
	LM3530_BRT_CTRL_REG,
	LM3530_ALS_ZB0_REG,
	LM3530_ALS_ZB1_REG,
	LM3530_ALS_ZB2_REG,
	LM3530_ALS_ZB3_REG,
	LM3530_ALS_Z0T_REG,
	LM3530_ALS_Z1T_REG,
	LM3530_ALS_Z2T_REG,
	LM3530_ALS_Z3T_REG,
	LM3530_ALS_Z4T_REG,
};

static int lm3530_get_mode_from_str(const char *str)
{
	int i;

	for (i = 0; i < ARRAY_SIZE(mode_map); i++)
		if (sysfs_streq(str, mode_map[i].mode))
			return mode_map[i].mode_val;

	return -1;
}

static int lm3530_init_registers(struct lm3530_data *drvdata)
{
	int ret = 0;
	int i;
	u8 gen_config;
	u8 als_config = 0;
	u8 brt_ramp;
	u8 als_imp_sel = 0;
	u8 brightness;
	u8 reg_val[LM3530_REG_MAX];
	struct lm3530_platform_data *pltfm = drvdata->pdata;
	struct i2c_client *client = drvdata->client;

	gen_config = (pltfm->brt_ramp_law << LM3530_RAMP_LAW_SHIFT) |
			((pltfm->max_current & 7) << LM3530_MAX_CURR_SHIFT);

	if (drvdata->mode == LM3530_BL_MODE_MANUAL ||
	    drvdata->mode == LM3530_BL_MODE_ALS)
		gen_config |= (LM3530_ENABLE_I2C);

	if (drvdata->mode == LM3530_BL_MODE_ALS) {
		als_config =
			(pltfm->als_avrg_time << LM3530_ALS_AVG_TIME_SHIFT) |
			(LM3530_ENABLE_ALS) |
			(pltfm->als_input_mode << LM3530_ALS_SEL_SHIFT);

		als_imp_sel =
			(pltfm->als1_resistor_sel << LM3530_ALS1_IMP_SHIFT) |
			(pltfm->als2_resistor_sel << LM3530_ALS2_IMP_SHIFT);
	}

	if (drvdata->mode == LM3530_BL_MODE_PWM)
		gen_config |= (LM3530_ENABLE_PWM) |
				(pltfm->pwm_pol_hi << LM3530_PWM_POL_SHIFT) |
				(LM3530_ENABLE_PWM_SIMPLE);

	brt_ramp = (pltfm->brt_ramp_fall << LM3530_BRT_RAMP_FALL_SHIFT) |
			(pltfm->brt_ramp_rise << LM3530_BRT_RAMP_RISE_SHIFT);

	brightness = pltfm->brt_val;

	reg_val[0] = gen_config;	/* LM3530_GEN_CONFIG */
	reg_val[1] = als_config;	/* LM3530_ALS_CONFIG */
	reg_val[2] = brt_ramp;		/* LM3530_BRT_RAMP_RATE */
	reg_val[3] = 0x00;		/* LM3530_ALS_ZONE_REG */
	reg_val[4] = als_imp_sel;	/* LM3530_ALS_IMP_SELECT */
	reg_val[5] = brightness;	/* LM3530_BRT_CTRL_REG */
	reg_val[6] = LM3530_DEF_ZB_0;	/* LM3530_ALS_ZB0_REG */
	reg_val[7] = LM3530_DEF_ZB_1;	/* LM3530_ALS_ZB1_REG */
	reg_val[8] = LM3530_DEF_ZB_2;	/* LM3530_ALS_ZB2_REG */
	reg_val[9] = LM3530_DEF_ZB_3;	/* LM3530_ALS_ZB3_REG */
	reg_val[10] = LM3530_DEF_ZT_0;	/* LM3530_ALS_Z0T_REG */
	reg_val[11] = LM3530_DEF_ZT_1;	/* LM3530_ALS_Z1T_REG */
	reg_val[12] = LM3530_DEF_ZT_2;	/* LM3530_ALS_Z2T_REG */
	reg_val[13] = LM3530_DEF_ZT_3;	/* LM3530_ALS_Z3T_REG */
	reg_val[14] = LM3530_DEF_ZT_4;	/* LM3530_ALS_Z4T_REG */

	for (i = 0; i < LM3530_REG_MAX; i++) {
		ret = i2c_smbus_write_byte_data(client,
				lm3530_reg[i], reg_val[i]);
		if (ret)
			break;
	}

	return ret;
}

static void lm3530_brightness_set(struct led_classdev *led_cdev,
				     enum led_brightness brt_val)
{
	int err;
	struct lm3530_data *drvdata =
	    container_of(led_cdev, struct lm3530_data, led_dev);

	switch (drvdata->mode) {
	case LM3530_BL_MODE_MANUAL:

		/* set the brightness in brightness control register*/
		err = i2c_smbus_write_byte_data(drvdata->client,
				LM3530_BRT_CTRL_REG, brt_val / 2);
		if (err)
			dev_err(&drvdata->client->dev,
				"Unable to set brightness: %d\n", err);
		break;
	case LM3530_BL_MODE_ALS:
		break;
	case LM3530_BL_MODE_PWM:
		break;
	default:
		break;
	}
}


static ssize_t lm3530_mode_set(struct device *dev, struct device_attribute
				   *attr, const char *buf, size_t size)
{
	int err;
	struct i2c_client *client = container_of(
					dev->parent, struct i2c_client, dev);
	struct lm3530_data *drvdata = i2c_get_clientdata(client);
	int mode;

	mode = lm3530_get_mode_from_str(buf);
	if (mode < 0) {
		dev_err(dev, "Invalid mode\n");
		return -EINVAL;
	}

	if (mode == LM3530_BL_MODE_MANUAL)
		drvdata->mode = LM3530_BL_MODE_MANUAL;
	else if (mode == LM3530_BL_MODE_ALS)
		drvdata->mode = LM3530_BL_MODE_ALS;
	else if (mode == LM3530_BL_MODE_PWM) {
		dev_err(dev, "PWM mode not supported\n");
		return -EINVAL;
	}

	err = lm3530_init_registers(drvdata);
	if (err) {
		dev_err(dev, "Setting %s Mode failed :%d\n", buf, err);
		return err;
	}

	return sizeof(drvdata->mode);
}

static DEVICE_ATTR(mode, 0644, NULL, lm3530_mode_set);

static int __devinit lm3530_probe(struct i2c_client *client,
			   const struct i2c_device_id *id)
{
	struct lm3530_platform_data *pdata = client->dev.platform_data;
	struct lm3530_data *drvdata;
	int err = 0;

	if (pdata == NULL) {
		dev_err(&client->dev, "platform data required\n");
		err = -ENODEV;
		goto err_out;
	}

	/* BL mode */
	if (pdata->mode > LM3530_BL_MODE_PWM) {
		dev_err(&client->dev, "Illegal Mode request\n");
		err = -EINVAL;
		goto err_out;
	}

	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
		dev_err(&client->dev, "I2C_FUNC_I2C not supported\n");
		err = -EIO;
		goto err_out;
	}

	drvdata = kzalloc(sizeof(struct lm3530_data), GFP_KERNEL);
	if (drvdata == NULL) {
		err = -ENOMEM;
		goto err_out;
	}

	drvdata->mode = pdata->mode;
	drvdata->client = client;
	drvdata->pdata = pdata;
	drvdata->led_dev.name = LM3530_LED_DEV;
	drvdata->led_dev.brightness_set = lm3530_brightness_set;

	i2c_set_clientdata(client, drvdata);

	err = lm3530_init_registers(drvdata);
	if (err < 0) {
		dev_err(&client->dev, "Register Init failed: %d\n", err);
		err = -ENODEV;
		goto err_reg_init;
	}

	err = led_classdev_register((struct device *)
				      &client->dev, &drvdata->led_dev);
	if (err < 0) {
		dev_err(&client->dev, "Register led class failed: %d\n", err);
		err = -ENODEV;
		goto err_class_register;
	}

	err = device_create_file(drvdata->led_dev.dev, &dev_attr_mode);
	if (err < 0) {
		dev_err(&client->dev, "File device creation failed: %d\n", err);
		err = -ENODEV;
		goto err_create_file;
	}

	return 0;

err_create_file:
	led_classdev_unregister(&drvdata->led_dev);
err_class_register:
err_reg_init:
	kfree(drvdata);
err_out:
	return err;
}

static int __devexit lm3530_remove(struct i2c_client *client)
{
	struct lm3530_data *drvdata = i2c_get_clientdata(client);

	device_remove_file(drvdata->led_dev.dev, &dev_attr_mode);
	led_classdev_unregister(&drvdata->led_dev);
	kfree(drvdata);
	return 0;
}

static const struct i2c_device_id lm3530_id[] = {
	{LM3530_NAME, 0},
	{}
};

static struct i2c_driver lm3530_i2c_driver = {
	.probe = lm3530_probe,
	.remove = lm3530_remove,
	.id_table = lm3530_id,
	.driver = {
		.name = LM3530_NAME,
		.owner = THIS_MODULE,
	},
};

static int __init lm3530_init(void)
{
	return i2c_add_driver(&lm3530_i2c_driver);
}

static void __exit lm3530_exit(void)
{
	i2c_del_driver(&lm3530_i2c_driver);
}

module_init(lm3530_init);
module_exit(lm3530_exit);

MODULE_DESCRIPTION("Back Light driver for LM3530");
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Shreshtha Kumar SAHU <shreshthakumar.sahu@stericsson.com>");
Commit	Line	Data
b1e6b706 SKS	1	/*
	2	* Copyright (C) 2011 ST-Ericsson SA.
	3	* Copyright (C) 2009 Motorola, Inc.
	4	*
	5	* License Terms: GNU General Public License v2
	6	*
	7	* Simple driver for National Semiconductor LM3530 Backlight driver chip
	8	*
	9	* Author: Shreshtha Kumar SAHU <shreshthakumar.sahu@stericsson.com>
	10	* based on leds-lm3530.c by Dan Murphy <D.Murphy@motorola.com>
	11	*/
	12
	13	#include <linux/i2c.h>
	14	#include <linux/leds.h>
	15	#include <linux/slab.h>
	16	#include <linux/platform_device.h>
	17	#include <linux/input.h>
	18	#include <linux/led-lm3530.h>
	19	#include <linux/types.h>
	20
	21	#define LM3530_LED_DEV "lcd-backlight"
	22	#define LM3530_NAME "lm3530-led"
	23
	24	#define LM3530_GEN_CONFIG 0x10
	25	#define LM3530_ALS_CONFIG 0x20
	26	#define LM3530_BRT_RAMP_RATE 0x30
	27	#define LM3530_ALS_ZONE_REG 0x40
	28	#define LM3530_ALS_IMP_SELECT 0x41
	29	#define LM3530_BRT_CTRL_REG 0xA0
	30	#define LM3530_ALS_ZB0_REG 0x60
	31	#define LM3530_ALS_ZB1_REG 0x61
	32	#define LM3530_ALS_ZB2_REG 0x62
	33	#define LM3530_ALS_ZB3_REG 0x63
	34	#define LM3530_ALS_Z0T_REG 0x70
	35	#define LM3530_ALS_Z1T_REG 0x71
	36	#define LM3530_ALS_Z2T_REG 0x72
	37	#define LM3530_ALS_Z3T_REG 0x73
	38	#define LM3530_ALS_Z4T_REG 0x74
	39	#define LM3530_REG_MAX 15
	40
	41	/* General Control Register */
	42	#define LM3530_EN_I2C_SHIFT (0)
	43	#define LM3530_RAMP_LAW_SHIFT (1)
	44	#define LM3530_MAX_CURR_SHIFT (2)
	45	#define LM3530_EN_PWM_SHIFT (5)
	46	#define LM3530_PWM_POL_SHIFT (6)
	47	#define LM3530_EN_PWM_SIMPLE_SHIFT (7)
	48
	49	#define LM3530_ENABLE_I2C (1 << LM3530_EN_I2C_SHIFT)
	50	#define LM3530_ENABLE_PWM (1 << LM3530_EN_PWM_SHIFT)
	51	#define LM3530_POL_LOW (1 << LM3530_PWM_POL_SHIFT)
	52	#define LM3530_ENABLE_PWM_SIMPLE (1 << LM3530_EN_PWM_SIMPLE_SHIFT)
	53
	54	/* ALS Config Register Options */
	55	#define LM3530_ALS_AVG_TIME_SHIFT (0)
	56	#define LM3530_EN_ALS_SHIFT (3)
	57	#define LM3530_ALS_SEL_SHIFT (5)
	58
	59	#define LM3530_ENABLE_ALS (3 << LM3530_EN_ALS_SHIFT)
	60
	61	/* Brightness Ramp Rate Register */
	62	#define LM3530_BRT_RAMP_FALL_SHIFT (0)
	63	#define LM3530_BRT_RAMP_RISE_SHIFT (3)
	64
65	/* ALS Resistor Select */
66	#define LM3530_ALS1_IMP_SHIFT (0)
67	#define LM3530_ALS2_IMP_SHIFT (4)
68
69	/* Zone Boundary Register defaults */
70	#define LM3530_DEF_ZB_0 (0x33)
71	#define LM3530_DEF_ZB_1 (0x66)
72	#define LM3530_DEF_ZB_2 (0x99)
73	#define LM3530_DEF_ZB_3 (0xCC)
74
75	/* Zone Target Register defaults */
76	#define LM3530_DEF_ZT_0 (0x19)
77	#define LM3530_DEF_ZT_1 (0x33)
78	#define LM3530_DEF_ZT_2 (0x4C)
79	#define LM3530_DEF_ZT_3 (0x66)
80	#define LM3530_DEF_ZT_4 (0x7F)
81
82	struct lm3530_mode_map {
83	const char *mode;
84	enum lm3530_mode mode_val;
85	};
86
87	static struct lm3530_mode_map mode_map[] = {
88	{ "man", LM3530_BL_MODE_MANUAL },
89	{ "als", LM3530_BL_MODE_ALS },
90	{ "pwm", LM3530_BL_MODE_PWM },
91	};
92
93	/**
94	* struct lm3530_data
95	* @led_dev: led class device
96	* @client: i2c client
97	* @pdata: LM3530 platform data
98	* @mode: mode of operation - manual, ALS, PWM
99	*/
100	struct lm3530_data {
101	struct led_classdev led_dev;
102	struct i2c_client *client;
103	struct lm3530_platform_data *pdata;
104	enum lm3530_mode mode;
105	};
106
107	static const u8 lm3530_reg[LM3530_REG_MAX] = {
108	LM3530_GEN_CONFIG,
109	LM3530_ALS_CONFIG,
110	LM3530_BRT_RAMP_RATE,
111	LM3530_ALS_ZONE_REG,
112	LM3530_ALS_IMP_SELECT,
113	LM3530_BRT_CTRL_REG,
114	LM3530_ALS_ZB0_REG,
115	LM3530_ALS_ZB1_REG,
116	LM3530_ALS_ZB2_REG,
117	LM3530_ALS_ZB3_REG,
118	LM3530_ALS_Z0T_REG,
119	LM3530_ALS_Z1T_REG,
120	LM3530_ALS_Z2T_REG,
121	LM3530_ALS_Z3T_REG,
122	LM3530_ALS_Z4T_REG,
123	};
124
125	static int lm3530_get_mode_from_str(const char *str)
126	{
127	int i;
128
129	for (i = 0; i < ARRAY_SIZE(mode_map); i++)
130	if (sysfs_streq(str, mode_map[i].mode))
131	return mode_map[i].mode_val;
132
133	return -1;
134	}
135
136	static int lm3530_init_registers(struct lm3530_data *drvdata)
137	{
138	int ret = 0;
139	int i;
140	u8 gen_config;
141	u8 als_config = 0;
142	u8 brt_ramp;
143	u8 als_imp_sel = 0;
144	u8 brightness;
145	u8 reg_val[LM3530_REG_MAX];
146	struct lm3530_platform_data *pltfm = drvdata->pdata;
147	struct i2c_client *client = drvdata->client;
148
149	gen_config = (pltfm->brt_ramp_law << LM3530_RAMP_LAW_SHIFT) \|
150	((pltfm->max_current & 7) << LM3530_MAX_CURR_SHIFT);
151
152	if (drvdata->mode == LM3530_BL_MODE_MANUAL \|\|
153	drvdata->mode == LM3530_BL_MODE_ALS)
154	gen_config \|= (LM3530_ENABLE_I2C);
155
156	if (drvdata->mode == LM3530_BL_MODE_ALS) {
157	als_config =
158	(pltfm->als_avrg_time << LM3530_ALS_AVG_TIME_SHIFT) \|
159	(LM3530_ENABLE_ALS) \|
160	(pltfm->als_input_mode << LM3530_ALS_SEL_SHIFT);
161
162	als_imp_sel =
163	(pltfm->als1_resistor_sel << LM3530_ALS1_IMP_SHIFT) \|
164	(pltfm->als2_resistor_sel << LM3530_ALS2_IMP_SHIFT);
165	}
166
167	if (drvdata->mode == LM3530_BL_MODE_PWM)
168	gen_config \|= (LM3530_ENABLE_PWM) \|
169	(pltfm->pwm_pol_hi << LM3530_PWM_POL_SHIFT) \|
170	(LM3530_ENABLE_PWM_SIMPLE);
171
172	brt_ramp = (pltfm->brt_ramp_fall << LM3530_BRT_RAMP_FALL_SHIFT) \|
173	(pltfm->brt_ramp_rise << LM3530_BRT_RAMP_RISE_SHIFT);
174
175	brightness = pltfm->brt_val;
176
177	reg_val[0] = gen_config; /* LM3530_GEN_CONFIG */
178	reg_val[1] = als_config; /* LM3530_ALS_CONFIG */
179	reg_val[2] = brt_ramp; /* LM3530_BRT_RAMP_RATE */
180	reg_val[3] = 0x00; /* LM3530_ALS_ZONE_REG */
181	reg_val[4] = als_imp_sel; /* LM3530_ALS_IMP_SELECT */
182	reg_val[5] = brightness; /* LM3530_BRT_CTRL_REG */
183	reg_val[6] = LM3530_DEF_ZB_0; /* LM3530_ALS_ZB0_REG */
184	reg_val[7] = LM3530_DEF_ZB_1; /* LM3530_ALS_ZB1_REG */
185	reg_val[8] = LM3530_DEF_ZB_2; /* LM3530_ALS_ZB2_REG */
186	reg_val[9] = LM3530_DEF_ZB_3; /* LM3530_ALS_ZB3_REG */
187	reg_val[10] = LM3530_DEF_ZT_0; /* LM3530_ALS_Z0T_REG */
188	reg_val[11] = LM3530_DEF_ZT_1; /* LM3530_ALS_Z1T_REG */
189	reg_val[12] = LM3530_DEF_ZT_2; /* LM3530_ALS_Z2T_REG */
190	reg_val[13] = LM3530_DEF_ZT_3; /* LM3530_ALS_Z3T_REG */
191	reg_val[14] = LM3530_DEF_ZT_4; /* LM3530_ALS_Z4T_REG */
192
193	for (i = 0; i < LM3530_REG_MAX; i++) {
194	ret = i2c_smbus_write_byte_data(client,
195	lm3530_reg[i], reg_val[i]);
196	if (ret)
197	break;
198	}
199
200	return ret;
201	}
202
203	static void lm3530_brightness_set(struct led_classdev *led_cdev,
204	enum led_brightness brt_val)
205	{
206	int err;
207	struct lm3530_data *drvdata =
208	container_of(led_cdev, struct lm3530_data, led_dev);
209
210	switch (drvdata->mode) {
211	case LM3530_BL_MODE_MANUAL:
212
213	/* set the brightness in brightness control register*/
214	err = i2c_smbus_write_byte_data(drvdata->client,
215	LM3530_BRT_CTRL_REG, brt_val / 2);
216	if (err)
217	dev_err(&drvdata->client->dev,
218	"Unable to set brightness: %d\n", err);
219	break;
220	case LM3530_BL_MODE_ALS:
221	break;
222	case LM3530_BL_MODE_PWM:
223	break;
224	default:
225	break;
226	}
227	}
228
229
230	static ssize_t lm3530_mode_set(struct device *dev, struct device_attribute
231	attr, const char buf, size_t size)
232	{
233	int err;
234	struct i2c_client *client = container_of(
235	dev->parent, struct i2c_client, dev);
236	struct lm3530_data *drvdata = i2c_get_clientdata(client);
237	int mode;
238
239	mode = lm3530_get_mode_from_str(buf);
240	if (mode < 0) {
241	dev_err(dev, "Invalid mode\n");
242	return -EINVAL;
243	}
244
245	if (mode == LM3530_BL_MODE_MANUAL)
246	drvdata->mode = LM3530_BL_MODE_MANUAL;
247	else if (mode == LM3530_BL_MODE_ALS)
248	drvdata->mode = LM3530_BL_MODE_ALS;
249	else if (mode == LM3530_BL_MODE_PWM) {
250	dev_err(dev, "PWM mode not supported\n");
251	return -EINVAL;
252	}
253
254	err = lm3530_init_registers(drvdata);
255	if (err) {
256	dev_err(dev, "Setting %s Mode failed :%d\n", buf, err);
257	return err;
258	}
259
260	return sizeof(drvdata->mode);
261	}
262
263	static DEVICE_ATTR(mode, 0644, NULL, lm3530_mode_set);
264
265	static int __devinit lm3530_probe(struct i2c_client *client,
266	const struct i2c_device_id *id)
267	{
268	struct lm3530_platform_data *pdata = client->dev.platform_data;
269	struct lm3530_data *drvdata;
270	int err = 0;
271
272	if (pdata == NULL) {
273	dev_err(&client->dev, "platform data required\n");
274	err = -ENODEV;
275	goto err_out;
276	}
277
278	/* BL mode */
279	if (pdata->mode > LM3530_BL_MODE_PWM) {
280	dev_err(&client->dev, "Illegal Mode request\n");
281	err = -EINVAL;
282	goto err_out;
283	}
284
285	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
286	dev_err(&client->dev, "I2C_FUNC_I2C not supported\n");
287	err = -EIO;
288	goto err_out;
289	}
290
291	drvdata = kzalloc(sizeof(struct lm3530_data), GFP_KERNEL);
292	if (drvdata == NULL) {
293	err = -ENOMEM;
294	goto err_out;
295	}
296
297	drvdata->mode = pdata->mode;
298	drvdata->client = client;
299	drvdata->pdata = pdata;
300	drvdata->led_dev.name = LM3530_LED_DEV;
301	drvdata->led_dev.brightness_set = lm3530_brightness_set;
302
303	i2c_set_clientdata(client, drvdata);
304
305	err = lm3530_init_registers(drvdata);
306	if (err < 0) {
307	dev_err(&client->dev, "Register Init failed: %d\n", err);
308	err = -ENODEV;
309	goto err_reg_init;
310	}
311
312	err = led_classdev_register((struct device *)
313	&client->dev, &drvdata->led_dev);
314	if (err < 0) {
315	dev_err(&client->dev, "Register led class failed: %d\n", err);
316	err = -ENODEV;
317	goto err_class_register;
318	}
319
320	err = device_create_file(drvdata->led_dev.dev, &dev_attr_mode);
321	if (err < 0) {
322	dev_err(&client->dev, "File device creation failed: %d\n", err);
323	err = -ENODEV;
324	goto err_create_file;
325	}
326
327	return 0;
328
329	err_create_file:
330	led_classdev_unregister(&drvdata->led_dev);
331	err_class_register:
332	err_reg_init:
333	kfree(drvdata);
334	err_out:
335	return err;
336	}
337
338	static int __devexit lm3530_remove(struct i2c_client *client)
339	{
340	struct lm3530_data *drvdata = i2c_get_clientdata(client);
341
342	device_remove_file(drvdata->led_dev.dev, &dev_attr_mode);
343	led_classdev_unregister(&drvdata->led_dev);
344	kfree(drvdata);
345	return 0;
346	}
347
348	static const struct i2c_device_id lm3530_id[] = {
349	{LM3530_NAME, 0},
350	{}
351	};
352
353	static struct i2c_driver lm3530_i2c_driver = {
354	.probe = lm3530_probe,
355	.remove = lm3530_remove,
356	.id_table = lm3530_id,
357	.driver = {
358	.name = LM3530_NAME,
359	.owner = THIS_MODULE,
360	},
361	};
362
363	static int __init lm3530_init(void)
364	{
365	return i2c_add_driver(&lm3530_i2c_driver);
366	}
367
368	static void __exit lm3530_exit(void)
369	{
370	i2c_del_driver(&lm3530_i2c_driver);
371	}
372
373	module_init(lm3530_init);
374	module_exit(lm3530_exit);
375
376	MODULE_DESCRIPTION("Back Light driver for LM3530");
377	MODULE_LICENSE("GPL v2");
378	MODULE_AUTHOR("Shreshtha Kumar SAHU <shreshthakumar.sahu@stericsson.com>");