Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * Device driver for the i2c thermostat found on the iBook G4, Albook G4 | |
3 | * | |
4 | * Copyright (C) 2003, 2004 Colin Leroy, Rasmus Rohde, Benjamin Herrenschmidt | |
5 | * | |
631dd1a8 JM |
6 | * Documentation from 115254175ADT7467_pra.pdf and 3686221171167ADT7460_b.pdf |
7 | * http://www.onsemi.com/PowerSolutions/product.do?id=ADT7467 | |
8 | * http://www.onsemi.com/PowerSolutions/product.do?id=ADT7460 | |
1da177e4 LT |
9 | * |
10 | */ | |
11 | ||
1da177e4 LT |
12 | #include <linux/types.h> |
13 | #include <linux/module.h> | |
14 | #include <linux/errno.h> | |
15 | #include <linux/kernel.h> | |
16 | #include <linux/delay.h> | |
17 | #include <linux/sched.h> | |
18 | #include <linux/i2c.h> | |
19 | #include <linux/slab.h> | |
20 | #include <linux/init.h> | |
21 | #include <linux/spinlock.h> | |
1da177e4 LT |
22 | #include <linux/wait.h> |
23 | #include <linux/suspend.h> | |
24 | #include <linux/kthread.h> | |
25 | #include <linux/moduleparam.h> | |
7dfb7103 | 26 | #include <linux/freezer.h> |
ad9e05ae | 27 | #include <linux/of_platform.h> |
1da177e4 LT |
28 | |
29 | #include <asm/prom.h> | |
30 | #include <asm/machdep.h> | |
31 | #include <asm/io.h> | |
1da177e4 | 32 | #include <asm/sections.h> |
1da177e4 LT |
33 | |
34 | #undef DEBUG | |
35 | ||
36 | #define CONFIG_REG 0x40 | |
37 | #define MANUAL_MASK 0xe0 | |
38 | #define AUTO_MASK 0x20 | |
0512a9a8 | 39 | #define INVERT_MASK 0x10 |
1da177e4 | 40 | |
d20c507f CL |
41 | static u8 TEMP_REG[3] = {0x26, 0x25, 0x27}; /* local, sensor1, sensor2 */ |
42 | static u8 LIMIT_REG[3] = {0x6b, 0x6a, 0x6c}; /* local, sensor1, sensor2 */ | |
1da177e4 LT |
43 | static u8 MANUAL_MODE[2] = {0x5c, 0x5d}; |
44 | static u8 REM_CONTROL[2] = {0x00, 0x40}; | |
45 | static u8 FAN_SPEED[2] = {0x28, 0x2a}; | |
46 | static u8 FAN_SPD_SET[2] = {0x30, 0x31}; | |
47 | ||
d20c507f CL |
48 | static u8 default_limits_local[3] = {70, 50, 70}; /* local, sensor1, sensor2 */ |
49 | static u8 default_limits_chip[3] = {80, 65, 80}; /* local, sensor1, sensor2 */ | |
87275856 | 50 | static const char *sensor_location[3]; |
1da177e4 | 51 | |
87275856 | 52 | static int limit_adjust; |
1da177e4 | 53 | static int fan_speed = -1; |
90ab5ee9 | 54 | static bool verbose; |
1da177e4 LT |
55 | |
56 | MODULE_AUTHOR("Colin Leroy <colin@colino.net>"); | |
57 | MODULE_DESCRIPTION("Driver for ADT746x thermostat in iBook G4 and " | |
58 | "Powerbook G4 Alu"); | |
59 | MODULE_LICENSE("GPL"); | |
60 | ||
61 | module_param(limit_adjust, int, 0644); | |
d20c507f | 62 | MODULE_PARM_DESC(limit_adjust,"Adjust maximum temperatures (50 sensor1, 70 sensor2) " |
1da177e4 LT |
63 | "by N degrees."); |
64 | ||
65 | module_param(fan_speed, int, 0644); | |
66 | MODULE_PARM_DESC(fan_speed,"Specify starting fan speed (0-255) " | |
67 | "(default 64)"); | |
68 | ||
9f6d4b0c BC |
69 | module_param(verbose, bool, 0); |
70 | MODULE_PARM_DESC(verbose,"Verbose log operations " | |
71 | "(default 0)"); | |
72 | ||
1da177e4 | 73 | struct thermostat { |
2e613e7f | 74 | struct i2c_client *clt; |
1da177e4 LT |
75 | u8 temps[3]; |
76 | u8 cached_temp[3]; | |
77 | u8 initial_limits[3]; | |
78 | u8 limits[3]; | |
79 | int last_speed[2]; | |
80 | int last_var[2]; | |
1496e89a | 81 | int pwm_inv[2]; |
1da177e4 LT |
82 | }; |
83 | ||
84 | static enum {ADT7460, ADT7467} therm_type; | |
85 | static int therm_bus, therm_address; | |
2dc11581 | 86 | static struct platform_device * of_dev; |
1da177e4 LT |
87 | static struct thermostat* thermostat; |
88 | static struct task_struct *thread_therm = NULL; | |
89 | ||
1da177e4 LT |
90 | static void write_both_fan_speed(struct thermostat *th, int speed); |
91 | static void write_fan_speed(struct thermostat *th, int speed, int fan); | |
33a470f6 JD |
92 | static void thermostat_create_files(void); |
93 | static void thermostat_remove_files(void); | |
1da177e4 LT |
94 | |
95 | static int | |
96 | write_reg(struct thermostat* th, int reg, u8 data) | |
97 | { | |
98 | u8 tmp[2]; | |
99 | int rc; | |
100 | ||
101 | tmp[0] = reg; | |
102 | tmp[1] = data; | |
2e613e7f | 103 | rc = i2c_master_send(th->clt, (const char *)tmp, 2); |
1da177e4 LT |
104 | if (rc < 0) |
105 | return rc; | |
106 | if (rc != 2) | |
107 | return -ENODEV; | |
108 | return 0; | |
109 | } | |
110 | ||
111 | static int | |
112 | read_reg(struct thermostat* th, int reg) | |
113 | { | |
114 | u8 reg_addr, data; | |
115 | int rc; | |
116 | ||
117 | reg_addr = (u8)reg; | |
2e613e7f | 118 | rc = i2c_master_send(th->clt, ®_addr, 1); |
1da177e4 LT |
119 | if (rc < 0) |
120 | return rc; | |
121 | if (rc != 1) | |
122 | return -ENODEV; | |
2e613e7f | 123 | rc = i2c_master_recv(th->clt, (char *)&data, 1); |
1da177e4 LT |
124 | if (rc < 0) |
125 | return rc; | |
126 | return data; | |
127 | } | |
128 | ||
6f6b35e1 JD |
129 | static struct i2c_driver thermostat_driver; |
130 | ||
1da177e4 LT |
131 | static int |
132 | attach_thermostat(struct i2c_adapter *adapter) | |
133 | { | |
134 | unsigned long bus_no; | |
2e613e7f JD |
135 | struct i2c_board_info info; |
136 | struct i2c_client *client; | |
1da177e4 LT |
137 | |
138 | if (strncmp(adapter->name, "uni-n", 5)) | |
139 | return -ENODEV; | |
140 | bus_no = simple_strtoul(adapter->name + 6, NULL, 10); | |
141 | if (bus_no != therm_bus) | |
142 | return -ENODEV; | |
2e613e7f JD |
143 | |
144 | memset(&info, 0, sizeof(struct i2c_board_info)); | |
145 | strlcpy(info.type, "therm_adt746x", I2C_NAME_SIZE); | |
146 | info.addr = therm_address; | |
147 | client = i2c_new_device(adapter, &info); | |
148 | if (!client) | |
149 | return -ENODEV; | |
150 | ||
151 | /* | |
152 | * Let i2c-core delete that device on driver removal. | |
153 | * This is safe because i2c-core holds the core_lock mutex for us. | |
154 | */ | |
6f6b35e1 | 155 | list_add_tail(&client->detected, &thermostat_driver.clients); |
2e613e7f | 156 | return 0; |
1da177e4 LT |
157 | } |
158 | ||
159 | static int | |
2e613e7f | 160 | remove_thermostat(struct i2c_client *client) |
1da177e4 | 161 | { |
2e613e7f | 162 | struct thermostat *th = i2c_get_clientdata(client); |
1da177e4 LT |
163 | int i; |
164 | ||
33a470f6 JD |
165 | thermostat_remove_files(); |
166 | ||
1da177e4 LT |
167 | if (thread_therm != NULL) { |
168 | kthread_stop(thread_therm); | |
169 | } | |
9f6d4b0c | 170 | |
1da177e4 LT |
171 | printk(KERN_INFO "adt746x: Putting max temperatures back from " |
172 | "%d, %d, %d to %d, %d, %d\n", | |
173 | th->limits[0], th->limits[1], th->limits[2], | |
174 | th->initial_limits[0], th->initial_limits[1], | |
175 | th->initial_limits[2]); | |
9f6d4b0c | 176 | |
1da177e4 LT |
177 | for (i = 0; i < 3; i++) |
178 | write_reg(th, LIMIT_REG[i], th->initial_limits[i]); | |
179 | ||
180 | write_both_fan_speed(th, -1); | |
181 | ||
1da177e4 LT |
182 | thermostat = NULL; |
183 | ||
184 | kfree(th); | |
185 | ||
186 | return 0; | |
187 | } | |
188 | ||
1da177e4 LT |
189 | static int read_fan_speed(struct thermostat *th, u8 addr) |
190 | { | |
191 | u8 tmp[2]; | |
192 | u16 res; | |
193 | ||
194 | /* should start with low byte */ | |
195 | tmp[1] = read_reg(th, addr); | |
196 | tmp[0] = read_reg(th, addr + 1); | |
197 | ||
198 | res = tmp[1] + (tmp[0] << 8); | |
199 | /* "a value of 0xffff means that the fan has stopped" */ | |
200 | return (res == 0xffff ? 0 : (90000*60)/res); | |
201 | } | |
202 | ||
203 | static void write_both_fan_speed(struct thermostat *th, int speed) | |
204 | { | |
205 | write_fan_speed(th, speed, 0); | |
206 | if (therm_type == ADT7460) | |
207 | write_fan_speed(th, speed, 1); | |
208 | } | |
209 | ||
210 | static void write_fan_speed(struct thermostat *th, int speed, int fan) | |
211 | { | |
212 | u8 manual; | |
213 | ||
214 | if (speed > 0xff) | |
215 | speed = 0xff; | |
216 | else if (speed < -1) | |
217 | speed = 0; | |
218 | ||
219 | if (therm_type == ADT7467 && fan == 1) | |
220 | return; | |
221 | ||
222 | if (th->last_speed[fan] != speed) { | |
9f6d4b0c BC |
223 | if (verbose) { |
224 | if (speed == -1) | |
225 | printk(KERN_DEBUG "adt746x: Setting speed to automatic " | |
226 | "for %s fan.\n", sensor_location[fan+1]); | |
227 | else | |
228 | printk(KERN_DEBUG "adt746x: Setting speed to %d " | |
229 | "for %s fan.\n", speed, sensor_location[fan+1]); | |
230 | } | |
1da177e4 LT |
231 | } else |
232 | return; | |
233 | ||
234 | if (speed >= 0) { | |
235 | manual = read_reg(th, MANUAL_MODE[fan]); | |
1496e89a | 236 | manual &= ~INVERT_MASK; |
0512a9a8 | 237 | write_reg(th, MANUAL_MODE[fan], |
1496e89a | 238 | manual | MANUAL_MASK | th->pwm_inv[fan]); |
1da177e4 LT |
239 | write_reg(th, FAN_SPD_SET[fan], speed); |
240 | } else { | |
241 | /* back to automatic */ | |
242 | if(therm_type == ADT7460) { | |
243 | manual = read_reg(th, | |
244 | MANUAL_MODE[fan]) & (~MANUAL_MASK); | |
1496e89a DW |
245 | manual &= ~INVERT_MASK; |
246 | manual |= th->pwm_inv[fan]; | |
1da177e4 LT |
247 | write_reg(th, |
248 | MANUAL_MODE[fan], manual|REM_CONTROL[fan]); | |
249 | } else { | |
250 | manual = read_reg(th, MANUAL_MODE[fan]); | |
1496e89a DW |
251 | manual &= ~INVERT_MASK; |
252 | manual |= th->pwm_inv[fan]; | |
1da177e4 LT |
253 | write_reg(th, MANUAL_MODE[fan], manual&(~AUTO_MASK)); |
254 | } | |
255 | } | |
256 | ||
257 | th->last_speed[fan] = speed; | |
258 | } | |
259 | ||
260 | static void read_sensors(struct thermostat *th) | |
261 | { | |
262 | int i = 0; | |
263 | ||
264 | for (i = 0; i < 3; i++) | |
265 | th->temps[i] = read_reg(th, TEMP_REG[i]); | |
266 | } | |
267 | ||
268 | #ifdef DEBUG | |
269 | static void display_stats(struct thermostat *th) | |
270 | { | |
271 | if (th->temps[0] != th->cached_temp[0] | |
272 | || th->temps[1] != th->cached_temp[1] | |
273 | || th->temps[2] != th->cached_temp[2]) { | |
274 | printk(KERN_INFO "adt746x: Temperature infos:" | |
275 | " thermostats: %d,%d,%d;" | |
276 | " limits: %d,%d,%d;" | |
277 | " fan speed: %d RPM\n", | |
278 | th->temps[0], th->temps[1], th->temps[2], | |
279 | th->limits[0], th->limits[1], th->limits[2], | |
280 | read_fan_speed(th, FAN_SPEED[0])); | |
281 | } | |
282 | th->cached_temp[0] = th->temps[0]; | |
283 | th->cached_temp[1] = th->temps[1]; | |
284 | th->cached_temp[2] = th->temps[2]; | |
285 | } | |
286 | #endif | |
287 | ||
288 | static void update_fans_speed (struct thermostat *th) | |
289 | { | |
290 | int lastvar = 0; /* last variation, for iBook */ | |
291 | int i = 0; | |
292 | ||
293 | /* we don't care about local sensor, so we start at sensor 1 */ | |
294 | for (i = 1; i < 3; i++) { | |
295 | int started = 0; | |
296 | int fan_number = (therm_type == ADT7460 && i == 2); | |
297 | int var = th->temps[i] - th->limits[i]; | |
298 | ||
299 | if (var > -1) { | |
300 | int step = (255 - fan_speed) / 7; | |
301 | int new_speed = 0; | |
302 | ||
303 | /* hysteresis : change fan speed only if variation is | |
304 | * more than two degrees */ | |
305 | if (abs(var - th->last_var[fan_number]) < 2) | |
306 | continue; | |
307 | ||
308 | started = 1; | |
309 | new_speed = fan_speed + ((var-1)*step); | |
310 | ||
311 | if (new_speed < fan_speed) | |
312 | new_speed = fan_speed; | |
313 | if (new_speed > 255) | |
314 | new_speed = 255; | |
315 | ||
9f6d4b0c BC |
316 | if (verbose) |
317 | printk(KERN_DEBUG "adt746x: Setting fans speed to %d " | |
8354be9c | 318 | "(limit exceeded by %d on %s)\n", |
9f6d4b0c BC |
319 | new_speed, var, |
320 | sensor_location[fan_number+1]); | |
1da177e4 LT |
321 | write_both_fan_speed(th, new_speed); |
322 | th->last_var[fan_number] = var; | |
323 | } else if (var < -2) { | |
d20c507f | 324 | /* don't stop fan if sensor2 is cold and sensor1 is not |
1da177e4 LT |
325 | * so cold (lastvar >= -1) */ |
326 | if (i == 2 && lastvar < -1) { | |
327 | if (th->last_speed[fan_number] != 0) | |
9f6d4b0c BC |
328 | if (verbose) |
329 | printk(KERN_DEBUG "adt746x: Stopping " | |
330 | "fans.\n"); | |
1da177e4 LT |
331 | write_both_fan_speed(th, 0); |
332 | } | |
333 | } | |
334 | ||
335 | lastvar = var; | |
336 | ||
337 | if (started) | |
338 | return; /* we don't want to re-stop the fan | |
d20c507f | 339 | * if sensor1 is heating and sensor2 is not */ |
1da177e4 LT |
340 | } |
341 | } | |
342 | ||
343 | static int monitor_task(void *arg) | |
344 | { | |
345 | struct thermostat* th = arg; | |
346 | ||
83144186 | 347 | set_freezable(); |
1da177e4 | 348 | while(!kthread_should_stop()) { |
3e1d1d28 | 349 | try_to_freeze(); |
1da177e4 LT |
350 | msleep_interruptible(2000); |
351 | ||
352 | #ifndef DEBUG | |
353 | if (fan_speed != -1) | |
354 | read_sensors(th); | |
355 | #else | |
356 | read_sensors(th); | |
357 | #endif | |
358 | ||
359 | if (fan_speed != -1) | |
360 | update_fans_speed(th); | |
361 | ||
362 | #ifdef DEBUG | |
363 | display_stats(th); | |
364 | #endif | |
365 | ||
366 | } | |
367 | ||
368 | return 0; | |
369 | } | |
370 | ||
371 | static void set_limit(struct thermostat *th, int i) | |
372 | { | |
d20c507f | 373 | /* Set sensor1 limit higher to avoid powerdowns */ |
1da177e4 LT |
374 | th->limits[i] = default_limits_chip[i] + limit_adjust; |
375 | write_reg(th, LIMIT_REG[i], th->limits[i]); | |
376 | ||
377 | /* set our limits to normal */ | |
378 | th->limits[i] = default_limits_local[i] + limit_adjust; | |
379 | } | |
380 | ||
2e613e7f JD |
381 | static int probe_thermostat(struct i2c_client *client, |
382 | const struct i2c_device_id *id) | |
1da177e4 LT |
383 | { |
384 | struct thermostat* th; | |
385 | int rc; | |
386 | int i; | |
387 | ||
388 | if (thermostat) | |
389 | return 0; | |
390 | ||
cc61f957 | 391 | th = kzalloc(sizeof(struct thermostat), GFP_KERNEL); |
1da177e4 LT |
392 | if (!th) |
393 | return -ENOMEM; | |
394 | ||
2e613e7f JD |
395 | i2c_set_clientdata(client, th); |
396 | th->clt = client; | |
1da177e4 | 397 | |
99ca177a | 398 | rc = read_reg(th, CONFIG_REG); |
1da177e4 | 399 | if (rc < 0) { |
2e613e7f | 400 | dev_err(&client->dev, "Thermostat failed to read config!\n"); |
1da177e4 LT |
401 | kfree(th); |
402 | return -ENODEV; | |
403 | } | |
404 | ||
405 | /* force manual control to start the fan quieter */ | |
406 | if (fan_speed == -1) | |
407 | fan_speed = 64; | |
408 | ||
409 | if(therm_type == ADT7460) { | |
410 | printk(KERN_INFO "adt746x: ADT7460 initializing\n"); | |
411 | /* The 7460 needs to be started explicitly */ | |
412 | write_reg(th, CONFIG_REG, 1); | |
413 | } else | |
414 | printk(KERN_INFO "adt746x: ADT7467 initializing\n"); | |
415 | ||
416 | for (i = 0; i < 3; i++) { | |
417 | th->initial_limits[i] = read_reg(th, LIMIT_REG[i]); | |
418 | set_limit(th, i); | |
419 | } | |
9f6d4b0c | 420 | |
1da177e4 LT |
421 | printk(KERN_INFO "adt746x: Lowering max temperatures from %d, %d, %d" |
422 | " to %d, %d, %d\n", | |
423 | th->initial_limits[0], th->initial_limits[1], | |
424 | th->initial_limits[2], th->limits[0], th->limits[1], | |
425 | th->limits[2]); | |
426 | ||
427 | thermostat = th; | |
428 | ||
1496e89a DW |
429 | /* record invert bit status because fw can corrupt it after suspend */ |
430 | th->pwm_inv[0] = read_reg(th, MANUAL_MODE[0]) & INVERT_MASK; | |
431 | th->pwm_inv[1] = read_reg(th, MANUAL_MODE[1]) & INVERT_MASK; | |
432 | ||
1da177e4 LT |
433 | /* be sure to really write fan speed the first time */ |
434 | th->last_speed[0] = -2; | |
435 | th->last_speed[1] = -2; | |
436 | th->last_var[0] = -80; | |
437 | th->last_var[1] = -80; | |
438 | ||
439 | if (fan_speed != -1) { | |
440 | /* manual mode, stop fans */ | |
441 | write_both_fan_speed(th, 0); | |
442 | } else { | |
443 | /* automatic mode */ | |
444 | write_both_fan_speed(th, -1); | |
445 | } | |
446 | ||
447 | thread_therm = kthread_run(monitor_task, th, "kfand"); | |
448 | ||
449 | if (thread_therm == ERR_PTR(-ENOMEM)) { | |
450 | printk(KERN_INFO "adt746x: Kthread creation failed\n"); | |
451 | thread_therm = NULL; | |
452 | return -ENOMEM; | |
453 | } | |
454 | ||
33a470f6 JD |
455 | thermostat_create_files(); |
456 | ||
1da177e4 LT |
457 | return 0; |
458 | } | |
459 | ||
2e613e7f JD |
460 | static const struct i2c_device_id therm_adt746x_id[] = { |
461 | { "therm_adt746x", 0 }, | |
462 | { } | |
463 | }; | |
464 | ||
465 | static struct i2c_driver thermostat_driver = { | |
466 | .driver = { | |
467 | .name = "therm_adt746x", | |
468 | }, | |
469 | .attach_adapter = attach_thermostat, | |
470 | .probe = probe_thermostat, | |
471 | .remove = remove_thermostat, | |
472 | .id_table = therm_adt746x_id, | |
473 | }; | |
474 | ||
1da177e4 LT |
475 | /* |
476 | * Now, unfortunately, sysfs doesn't give us a nice void * we could | |
477 | * pass around to the attribute functions, so we don't really have | |
478 | * choice but implement a bunch of them... | |
479 | * | |
e404e274 | 480 | * FIXME, it does now... |
1da177e4 LT |
481 | */ |
482 | #define BUILD_SHOW_FUNC_INT(name, data) \ | |
e404e274 | 483 | static ssize_t show_##name(struct device *dev, struct device_attribute *attr, char *buf) \ |
1da177e4 LT |
484 | { \ |
485 | return sprintf(buf, "%d\n", data); \ | |
486 | } | |
487 | ||
d20c507f | 488 | #define BUILD_SHOW_FUNC_STR(name, data) \ |
e404e274 | 489 | static ssize_t show_##name(struct device *dev, struct device_attribute *attr, char *buf) \ |
d20c507f CL |
490 | { \ |
491 | return sprintf(buf, "%s\n", data); \ | |
492 | } | |
493 | ||
1da177e4 | 494 | #define BUILD_SHOW_FUNC_FAN(name, data) \ |
e404e274 | 495 | static ssize_t show_##name(struct device *dev, struct device_attribute *attr, char *buf) \ |
1da177e4 LT |
496 | { \ |
497 | return sprintf(buf, "%d (%d rpm)\n", \ | |
498 | thermostat->last_speed[data], \ | |
499 | read_fan_speed(thermostat, FAN_SPEED[data]) \ | |
500 | ); \ | |
501 | } | |
502 | ||
503 | #define BUILD_STORE_FUNC_DEG(name, data) \ | |
e404e274 | 504 | static ssize_t store_##name(struct device *dev, struct device_attribute *attr, const char *buf, size_t n) \ |
1da177e4 LT |
505 | { \ |
506 | int val; \ | |
507 | int i; \ | |
508 | val = simple_strtol(buf, NULL, 10); \ | |
d20c507f | 509 | printk(KERN_INFO "Adjusting limits by %d degrees\n", val); \ |
1da177e4 LT |
510 | limit_adjust = val; \ |
511 | for (i=0; i < 3; i++) \ | |
512 | set_limit(thermostat, i); \ | |
513 | return n; \ | |
514 | } | |
515 | ||
516 | #define BUILD_STORE_FUNC_INT(name, data) \ | |
e404e274 | 517 | static ssize_t store_##name(struct device *dev, struct device_attribute *attr, const char *buf, size_t n) \ |
1da177e4 | 518 | { \ |
2e74778c | 519 | int val; \ |
520 | val = simple_strtol(buf, NULL, 10); \ | |
1da177e4 LT |
521 | if (val < 0 || val > 255) \ |
522 | return -EINVAL; \ | |
523 | printk(KERN_INFO "Setting specified fan speed to %d\n", val); \ | |
524 | data = val; \ | |
525 | return n; \ | |
526 | } | |
527 | ||
d20c507f CL |
528 | BUILD_SHOW_FUNC_INT(sensor1_temperature, (read_reg(thermostat, TEMP_REG[1]))) |
529 | BUILD_SHOW_FUNC_INT(sensor2_temperature, (read_reg(thermostat, TEMP_REG[2]))) | |
530 | BUILD_SHOW_FUNC_INT(sensor1_limit, thermostat->limits[1]) | |
531 | BUILD_SHOW_FUNC_INT(sensor2_limit, thermostat->limits[2]) | |
532 | BUILD_SHOW_FUNC_STR(sensor1_location, sensor_location[1]) | |
533 | BUILD_SHOW_FUNC_STR(sensor2_location, sensor_location[2]) | |
1da177e4 LT |
534 | |
535 | BUILD_SHOW_FUNC_INT(specified_fan_speed, fan_speed) | |
d20c507f CL |
536 | BUILD_SHOW_FUNC_FAN(sensor1_fan_speed, 0) |
537 | BUILD_SHOW_FUNC_FAN(sensor2_fan_speed, 1) | |
1da177e4 LT |
538 | |
539 | BUILD_STORE_FUNC_INT(specified_fan_speed,fan_speed) | |
540 | BUILD_SHOW_FUNC_INT(limit_adjust, limit_adjust) | |
541 | BUILD_STORE_FUNC_DEG(limit_adjust, thermostat) | |
542 | ||
d20c507f CL |
543 | static DEVICE_ATTR(sensor1_temperature, S_IRUGO, |
544 | show_sensor1_temperature,NULL); | |
545 | static DEVICE_ATTR(sensor2_temperature, S_IRUGO, | |
546 | show_sensor2_temperature,NULL); | |
547 | static DEVICE_ATTR(sensor1_limit, S_IRUGO, | |
548 | show_sensor1_limit, NULL); | |
549 | static DEVICE_ATTR(sensor2_limit, S_IRUGO, | |
550 | show_sensor2_limit, NULL); | |
551 | static DEVICE_ATTR(sensor1_location, S_IRUGO, | |
552 | show_sensor1_location, NULL); | |
553 | static DEVICE_ATTR(sensor2_location, S_IRUGO, | |
554 | show_sensor2_location, NULL); | |
1da177e4 LT |
555 | |
556 | static DEVICE_ATTR(specified_fan_speed, S_IRUSR|S_IWUSR|S_IRGRP|S_IROTH, | |
557 | show_specified_fan_speed,store_specified_fan_speed); | |
558 | ||
d20c507f CL |
559 | static DEVICE_ATTR(sensor1_fan_speed, S_IRUGO, |
560 | show_sensor1_fan_speed, NULL); | |
561 | static DEVICE_ATTR(sensor2_fan_speed, S_IRUGO, | |
562 | show_sensor2_fan_speed, NULL); | |
1da177e4 LT |
563 | |
564 | static DEVICE_ATTR(limit_adjust, S_IRUSR|S_IWUSR|S_IRGRP|S_IROTH, | |
565 | show_limit_adjust, store_limit_adjust); | |
566 | ||
567 | ||
568 | static int __init | |
569 | thermostat_init(void) | |
570 | { | |
571 | struct device_node* np; | |
018a3d1d | 572 | const u32 *prop; |
d20c507f | 573 | int i = 0, offset = 0; |
44ea9c80 | 574 | |
1da177e4 LT |
575 | np = of_find_node_by_name(NULL, "fan"); |
576 | if (!np) | |
577 | return -ENODEV; | |
55b61fec | 578 | if (of_device_is_compatible(np, "adt7460")) |
1da177e4 | 579 | therm_type = ADT7460; |
55b61fec | 580 | else if (of_device_is_compatible(np, "adt7467")) |
1da177e4 | 581 | therm_type = ADT7467; |
958a65f2 JL |
582 | else { |
583 | of_node_put(np); | |
1da177e4 | 584 | return -ENODEV; |
958a65f2 | 585 | } |
a8bacec0 | 586 | |
01b2726d | 587 | prop = of_get_property(np, "hwsensor-params-version", NULL); |
a8bacec0 CL |
588 | printk(KERN_INFO "adt746x: version %d (%ssupported)\n", *prop, |
589 | (*prop == 1)?"":"un"); | |
958a65f2 JL |
590 | if (*prop != 1) { |
591 | of_node_put(np); | |
a8bacec0 | 592 | return -ENODEV; |
958a65f2 | 593 | } |
1da177e4 | 594 | |
01b2726d | 595 | prop = of_get_property(np, "reg", NULL); |
958a65f2 JL |
596 | if (!prop) { |
597 | of_node_put(np); | |
1da177e4 | 598 | return -ENODEV; |
958a65f2 | 599 | } |
1da177e4 LT |
600 | |
601 | /* look for bus either by path or using "reg" */ | |
602 | if (strstr(np->full_name, "/i2c-bus@") != NULL) { | |
603 | const char *tmp_bus = (strstr(np->full_name, "/i2c-bus@") + 9); | |
604 | therm_bus = tmp_bus[0]-'0'; | |
605 | } else { | |
606 | therm_bus = ((*prop) >> 8) & 0x0f; | |
607 | } | |
608 | ||
609 | therm_address = ((*prop) & 0xff) >> 1; | |
610 | ||
611 | printk(KERN_INFO "adt746x: Thermostat bus: %d, address: 0x%02x, " | |
612 | "limit_adjust: %d, fan_speed: %d\n", | |
613 | therm_bus, therm_address, limit_adjust, fan_speed); | |
614 | ||
01b2726d | 615 | if (of_get_property(np, "hwsensor-location", NULL)) { |
d20c507f | 616 | for (i = 0; i < 3; i++) { |
01b2726d | 617 | sensor_location[i] = of_get_property(np, |
d20c507f CL |
618 | "hwsensor-location", NULL) + offset; |
619 | ||
620 | if (sensor_location[i] == NULL) | |
621 | sensor_location[i] = ""; | |
622 | ||
623 | printk(KERN_INFO "sensor %d: %s\n", i, sensor_location[i]); | |
624 | offset += strlen(sensor_location[i]) + 1; | |
625 | } | |
626 | } else { | |
627 | sensor_location[0] = "?"; | |
628 | sensor_location[1] = "?"; | |
629 | sensor_location[2] = "?"; | |
630 | } | |
631 | ||
0365ba7f | 632 | of_dev = of_platform_device_create(np, "temperatures", NULL); |
44ea9c80 NP |
633 | of_node_put(np); |
634 | ||
1da177e4 LT |
635 | if (of_dev == NULL) { |
636 | printk(KERN_ERR "Can't register temperatures device !\n"); | |
637 | return -ENODEV; | |
638 | } | |
44ea9c80 | 639 | |
33a470f6 JD |
640 | #ifndef CONFIG_I2C_POWERMAC |
641 | request_module("i2c-powermac"); | |
642 | #endif | |
643 | ||
644 | return i2c_add_driver(&thermostat_driver); | |
645 | } | |
646 | ||
647 | static void thermostat_create_files(void) | |
648 | { | |
649 | int err; | |
650 | ||
10804f0f SR |
651 | err = device_create_file(&of_dev->dev, &dev_attr_sensor1_temperature); |
652 | err |= device_create_file(&of_dev->dev, &dev_attr_sensor2_temperature); | |
653 | err |= device_create_file(&of_dev->dev, &dev_attr_sensor1_limit); | |
654 | err |= device_create_file(&of_dev->dev, &dev_attr_sensor2_limit); | |
655 | err |= device_create_file(&of_dev->dev, &dev_attr_sensor1_location); | |
656 | err |= device_create_file(&of_dev->dev, &dev_attr_sensor2_location); | |
657 | err |= device_create_file(&of_dev->dev, &dev_attr_limit_adjust); | |
658 | err |= device_create_file(&of_dev->dev, &dev_attr_specified_fan_speed); | |
659 | err |= device_create_file(&of_dev->dev, &dev_attr_sensor1_fan_speed); | |
1da177e4 | 660 | if(therm_type == ADT7460) |
10804f0f SR |
661 | err |= device_create_file(&of_dev->dev, &dev_attr_sensor2_fan_speed); |
662 | if (err) | |
663 | printk(KERN_WARNING | |
25985edc | 664 | "Failed to create temperature attribute file(s).\n"); |
1da177e4 LT |
665 | } |
666 | ||
33a470f6 | 667 | static void thermostat_remove_files(void) |
1da177e4 LT |
668 | { |
669 | if (of_dev) { | |
d20c507f CL |
670 | device_remove_file(&of_dev->dev, &dev_attr_sensor1_temperature); |
671 | device_remove_file(&of_dev->dev, &dev_attr_sensor2_temperature); | |
672 | device_remove_file(&of_dev->dev, &dev_attr_sensor1_limit); | |
673 | device_remove_file(&of_dev->dev, &dev_attr_sensor2_limit); | |
674 | device_remove_file(&of_dev->dev, &dev_attr_sensor1_location); | |
675 | device_remove_file(&of_dev->dev, &dev_attr_sensor2_location); | |
1da177e4 LT |
676 | device_remove_file(&of_dev->dev, &dev_attr_limit_adjust); |
677 | device_remove_file(&of_dev->dev, &dev_attr_specified_fan_speed); | |
d20c507f | 678 | device_remove_file(&of_dev->dev, &dev_attr_sensor1_fan_speed); |
1da177e4 LT |
679 | |
680 | if(therm_type == ADT7460) | |
681 | device_remove_file(&of_dev->dev, | |
d20c507f | 682 | &dev_attr_sensor2_fan_speed); |
1da177e4 | 683 | |
1da177e4 | 684 | } |
33a470f6 JD |
685 | } |
686 | ||
687 | static void __exit | |
688 | thermostat_exit(void) | |
689 | { | |
1da177e4 | 690 | i2c_del_driver(&thermostat_driver); |
33a470f6 | 691 | of_device_unregister(of_dev); |
1da177e4 LT |
692 | } |
693 | ||
694 | module_init(thermostat_init); | |
695 | module_exit(thermostat_exit); |