Commit | Line | Data |
---|---|---|
aacb9d31 ST |
1 | /* |
2 | * Driver for Xceive XC5000 "QAM/8VSB single chip tuner" | |
3 | * | |
4 | * Copyright (c) 2007 Xceive Corporation | |
6d897616 | 5 | * Copyright (c) 2007 Steven Toth <stoth@linuxtv.org> |
aacb9d31 ST |
6 | * |
7 | * This program is free software; you can redistribute it and/or modify | |
8 | * it under the terms of the GNU General Public License as published by | |
9 | * the Free Software Foundation; either version 2 of the License, or | |
10 | * (at your option) any later version. | |
11 | * | |
12 | * This program is distributed in the hope that it will be useful, | |
13 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
14 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
15 | * | |
16 | * GNU General Public License for more details. | |
17 | * | |
18 | * You should have received a copy of the GNU General Public License | |
19 | * along with this program; if not, write to the Free Software | |
20 | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
21 | */ | |
22 | ||
23 | #include <linux/module.h> | |
24 | #include <linux/moduleparam.h> | |
4917019d | 25 | #include <linux/videodev2.h> |
aacb9d31 ST |
26 | #include <linux/delay.h> |
27 | #include <linux/dvb/frontend.h> | |
28 | #include <linux/i2c.h> | |
29 | ||
30 | #include "dvb_frontend.h" | |
31 | ||
32 | #include "xc5000.h" | |
89fd2854 | 33 | #include "tuner-i2c.h" |
aacb9d31 ST |
34 | |
35 | static int debug; | |
36 | module_param(debug, int, 0644); | |
37 | MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off)."); | |
38 | ||
b6bd5eb8 DH |
39 | static int no_poweroff; |
40 | module_param(no_poweroff, int, 0644); | |
41 | MODULE_PARM_DESC(no_poweroff, "0 (default) powers device off when not used.\n" | |
42 | "\t\t1 keep device energized and with tuner ready all the times.\n" | |
43 | "\t\tFaster, but consumes more power and keeps the device hotter"); | |
44 | ||
89fd2854 MK |
45 | static DEFINE_MUTEX(xc5000_list_mutex); |
46 | static LIST_HEAD(hybrid_tuner_instance_list); | |
47 | ||
8f3cd530 | 48 | #define dprintk(level, fmt, arg...) if (debug >= level) \ |
aacb9d31 ST |
49 | printk(KERN_INFO "%s: " fmt, "xc5000", ## arg) |
50 | ||
a6301d1d DH |
51 | #define XC5000_DEFAULT_FIRMWARE "dvb-fe-xc5000-1.6.114.fw" |
52 | #define XC5000_DEFAULT_FIRMWARE_SIZE 12401 | |
aacb9d31 | 53 | |
ffb41234 | 54 | struct xc5000_priv { |
89fd2854 MK |
55 | struct tuner_i2c_props i2c_props; |
56 | struct list_head hybrid_tuner_instance_list; | |
ffb41234 | 57 | |
2a6003c2 | 58 | u32 if_khz; |
ffb41234 MK |
59 | u32 freq_hz; |
60 | u32 bandwidth; | |
61 | u8 video_standard; | |
62 | u8 rf_mode; | |
ffb41234 MK |
63 | }; |
64 | ||
aacb9d31 ST |
65 | /* Misc Defines */ |
66 | #define MAX_TV_STANDARD 23 | |
67 | #define XC_MAX_I2C_WRITE_LENGTH 64 | |
68 | ||
69 | /* Signal Types */ | |
70 | #define XC_RF_MODE_AIR 0 | |
71 | #define XC_RF_MODE_CABLE 1 | |
72 | ||
73 | /* Result codes */ | |
74 | #define XC_RESULT_SUCCESS 0 | |
75 | #define XC_RESULT_RESET_FAILURE 1 | |
76 | #define XC_RESULT_I2C_WRITE_FAILURE 2 | |
77 | #define XC_RESULT_I2C_READ_FAILURE 3 | |
78 | #define XC_RESULT_OUT_OF_RANGE 5 | |
79 | ||
27c685a4 ST |
80 | /* Product id */ |
81 | #define XC_PRODUCT_ID_FW_NOT_LOADED 0x2000 | |
82 | #define XC_PRODUCT_ID_FW_LOADED 0x1388 | |
83 | ||
aacb9d31 ST |
84 | /* Registers */ |
85 | #define XREG_INIT 0x00 | |
86 | #define XREG_VIDEO_MODE 0x01 | |
87 | #define XREG_AUDIO_MODE 0x02 | |
88 | #define XREG_RF_FREQ 0x03 | |
89 | #define XREG_D_CODE 0x04 | |
90 | #define XREG_IF_OUT 0x05 | |
91 | #define XREG_SEEK_MODE 0x07 | |
7f05b530 | 92 | #define XREG_POWER_DOWN 0x0A /* Obsolete */ |
aacb9d31 ST |
93 | #define XREG_SIGNALSOURCE 0x0D /* 0=Air, 1=Cable */ |
94 | #define XREG_SMOOTHEDCVBS 0x0E | |
95 | #define XREG_XTALFREQ 0x0F | |
81c4dfe7 | 96 | #define XREG_FINERFREQ 0x10 |
aacb9d31 ST |
97 | #define XREG_DDIMODE 0x11 |
98 | ||
99 | #define XREG_ADC_ENV 0x00 | |
100 | #define XREG_QUALITY 0x01 | |
101 | #define XREG_FRAME_LINES 0x02 | |
102 | #define XREG_HSYNC_FREQ 0x03 | |
103 | #define XREG_LOCK 0x04 | |
104 | #define XREG_FREQ_ERROR 0x05 | |
105 | #define XREG_SNR 0x06 | |
106 | #define XREG_VERSION 0x07 | |
107 | #define XREG_PRODUCT_ID 0x08 | |
108 | #define XREG_BUSY 0x09 | |
bae7b7d7 | 109 | #define XREG_BUILD 0x0D |
aacb9d31 ST |
110 | |
111 | /* | |
112 | Basic firmware description. This will remain with | |
113 | the driver for documentation purposes. | |
114 | ||
115 | This represents an I2C firmware file encoded as a | |
116 | string of unsigned char. Format is as follows: | |
117 | ||
118 | char[0 ]=len0_MSB -> len = len_MSB * 256 + len_LSB | |
119 | char[1 ]=len0_LSB -> length of first write transaction | |
120 | char[2 ]=data0 -> first byte to be sent | |
121 | char[3 ]=data1 | |
122 | char[4 ]=data2 | |
123 | char[ ]=... | |
124 | char[M ]=dataN -> last byte to be sent | |
125 | char[M+1]=len1_MSB -> len = len_MSB * 256 + len_LSB | |
126 | char[M+2]=len1_LSB -> length of second write transaction | |
127 | char[M+3]=data0 | |
128 | char[M+4]=data1 | |
129 | ... | |
130 | etc. | |
131 | ||
132 | The [len] value should be interpreted as follows: | |
133 | ||
134 | len= len_MSB _ len_LSB | |
135 | len=1111_1111_1111_1111 : End of I2C_SEQUENCE | |
136 | len=0000_0000_0000_0000 : Reset command: Do hardware reset | |
137 | len=0NNN_NNNN_NNNN_NNNN : Normal transaction: number of bytes = {1:32767) | |
138 | len=1WWW_WWWW_WWWW_WWWW : Wait command: wait for {1:32767} ms | |
139 | ||
140 | For the RESET and WAIT commands, the two following bytes will contain | |
141 | immediately the length of the following transaction. | |
142 | ||
143 | */ | |
8f3cd530 | 144 | struct XC_TV_STANDARD { |
aacb9d31 | 145 | char *Name; |
e12671cf ST |
146 | u16 AudioMode; |
147 | u16 VideoMode; | |
8f3cd530 | 148 | }; |
aacb9d31 ST |
149 | |
150 | /* Tuner standards */ | |
27c685a4 ST |
151 | #define MN_NTSC_PAL_BTSC 0 |
152 | #define MN_NTSC_PAL_A2 1 | |
153 | #define MN_NTSC_PAL_EIAJ 2 | |
154 | #define MN_NTSC_PAL_Mono 3 | |
155 | #define BG_PAL_A2 4 | |
156 | #define BG_PAL_NICAM 5 | |
157 | #define BG_PAL_MONO 6 | |
158 | #define I_PAL_NICAM 7 | |
159 | #define I_PAL_NICAM_MONO 8 | |
160 | #define DK_PAL_A2 9 | |
161 | #define DK_PAL_NICAM 10 | |
162 | #define DK_PAL_MONO 11 | |
163 | #define DK_SECAM_A2DK1 12 | |
164 | #define DK_SECAM_A2LDK3 13 | |
165 | #define DK_SECAM_A2MONO 14 | |
166 | #define L_SECAM_NICAM 15 | |
167 | #define LC_SECAM_NICAM 16 | |
168 | #define DTV6 17 | |
169 | #define DTV8 18 | |
170 | #define DTV7_8 19 | |
171 | #define DTV7 20 | |
172 | #define FM_Radio_INPUT2 21 | |
173 | #define FM_Radio_INPUT1 22 | |
aacb9d31 | 174 | |
8f3cd530 | 175 | static struct XC_TV_STANDARD XC5000_Standard[MAX_TV_STANDARD] = { |
aacb9d31 ST |
176 | {"M/N-NTSC/PAL-BTSC", 0x0400, 0x8020}, |
177 | {"M/N-NTSC/PAL-A2", 0x0600, 0x8020}, | |
178 | {"M/N-NTSC/PAL-EIAJ", 0x0440, 0x8020}, | |
179 | {"M/N-NTSC/PAL-Mono", 0x0478, 0x8020}, | |
180 | {"B/G-PAL-A2", 0x0A00, 0x8049}, | |
181 | {"B/G-PAL-NICAM", 0x0C04, 0x8049}, | |
182 | {"B/G-PAL-MONO", 0x0878, 0x8059}, | |
183 | {"I-PAL-NICAM", 0x1080, 0x8009}, | |
184 | {"I-PAL-NICAM-MONO", 0x0E78, 0x8009}, | |
185 | {"D/K-PAL-A2", 0x1600, 0x8009}, | |
186 | {"D/K-PAL-NICAM", 0x0E80, 0x8009}, | |
187 | {"D/K-PAL-MONO", 0x1478, 0x8009}, | |
188 | {"D/K-SECAM-A2 DK1", 0x1200, 0x8009}, | |
8f3cd530 | 189 | {"D/K-SECAM-A2 L/DK3", 0x0E00, 0x8009}, |
aacb9d31 ST |
190 | {"D/K-SECAM-A2 MONO", 0x1478, 0x8009}, |
191 | {"L-SECAM-NICAM", 0x8E82, 0x0009}, | |
192 | {"L'-SECAM-NICAM", 0x8E82, 0x4009}, | |
193 | {"DTV6", 0x00C0, 0x8002}, | |
194 | {"DTV8", 0x00C0, 0x800B}, | |
195 | {"DTV7/8", 0x00C0, 0x801B}, | |
196 | {"DTV7", 0x00C0, 0x8007}, | |
197 | {"FM Radio-INPUT2", 0x9802, 0x9002}, | |
198 | {"FM Radio-INPUT1", 0x0208, 0x9002} | |
199 | }; | |
200 | ||
8e4c6797 | 201 | static int xc_load_fw_and_init_tuner(struct dvb_frontend *fe); |
91bd625e | 202 | static int xc5000_is_firmware_loaded(struct dvb_frontend *fe); |
bdd33563 | 203 | static int xc5000_readreg(struct xc5000_priv *priv, u16 reg, u16 *val); |
91bd625e | 204 | static int xc5000_TunerReset(struct dvb_frontend *fe); |
aacb9d31 | 205 | |
e12671cf | 206 | static int xc_send_i2c_data(struct xc5000_priv *priv, u8 *buf, int len) |
aacb9d31 | 207 | { |
d7800d4e DH |
208 | struct i2c_msg msg = { .addr = priv->i2c_props.addr, |
209 | .flags = 0, .buf = buf, .len = len }; | |
210 | ||
211 | if (i2c_transfer(priv->i2c_props.adap, &msg, 1) != 1) { | |
212 | printk(KERN_ERR "xc5000: I2C write failed (len=%i)\n", len); | |
213 | return XC_RESULT_I2C_WRITE_FAILURE; | |
214 | } | |
215 | return XC_RESULT_SUCCESS; | |
aacb9d31 ST |
216 | } |
217 | ||
bdd33563 DH |
218 | /* This routine is never used because the only time we read data from the |
219 | i2c bus is when we read registers, and we want that to be an atomic i2c | |
220 | transaction in case we are on a multi-master bus */ | |
e12671cf | 221 | static int xc_read_i2c_data(struct xc5000_priv *priv, u8 *buf, int len) |
aacb9d31 | 222 | { |
bdd33563 DH |
223 | struct i2c_msg msg = { .addr = priv->i2c_props.addr, |
224 | .flags = I2C_M_RD, .buf = buf, .len = len }; | |
225 | ||
226 | if (i2c_transfer(priv->i2c_props.adap, &msg, 1) != 1) { | |
227 | printk(KERN_ERR "xc5000 I2C read failed (len=%i)\n", len); | |
228 | return -EREMOTEIO; | |
229 | } | |
230 | return 0; | |
aacb9d31 ST |
231 | } |
232 | ||
e12671cf | 233 | static void xc_wait(int wait_ms) |
aacb9d31 | 234 | { |
e12671cf | 235 | msleep(wait_ms); |
aacb9d31 ST |
236 | } |
237 | ||
91bd625e | 238 | static int xc5000_TunerReset(struct dvb_frontend *fe) |
aacb9d31 ST |
239 | { |
240 | struct xc5000_priv *priv = fe->tuner_priv; | |
241 | int ret; | |
242 | ||
271ddbf7 | 243 | dprintk(1, "%s()\n", __func__); |
aacb9d31 | 244 | |
d7cba043 MK |
245 | if (fe->callback) { |
246 | ret = fe->callback(((fe->dvb) && (fe->dvb->priv)) ? | |
30650961 MK |
247 | fe->dvb->priv : |
248 | priv->i2c_props.adap->algo_data, | |
d7cba043 | 249 | DVB_FRONTEND_COMPONENT_TUNER, |
30650961 | 250 | XC5000_TUNER_RESET, 0); |
91bd625e | 251 | if (ret) { |
aacb9d31 | 252 | printk(KERN_ERR "xc5000: reset failed\n"); |
91bd625e DH |
253 | return XC_RESULT_RESET_FAILURE; |
254 | } | |
255 | } else { | |
27c685a4 | 256 | printk(KERN_ERR "xc5000: no tuner reset callback function, fatal\n"); |
91bd625e DH |
257 | return XC_RESULT_RESET_FAILURE; |
258 | } | |
259 | return XC_RESULT_SUCCESS; | |
aacb9d31 ST |
260 | } |
261 | ||
e12671cf | 262 | static int xc_write_reg(struct xc5000_priv *priv, u16 regAddr, u16 i2cData) |
aacb9d31 | 263 | { |
e12671cf | 264 | u8 buf[4]; |
aacb9d31 ST |
265 | int WatchDogTimer = 5; |
266 | int result; | |
267 | ||
268 | buf[0] = (regAddr >> 8) & 0xFF; | |
269 | buf[1] = regAddr & 0xFF; | |
270 | buf[2] = (i2cData >> 8) & 0xFF; | |
271 | buf[3] = i2cData & 0xFF; | |
272 | result = xc_send_i2c_data(priv, buf, 4); | |
e12671cf | 273 | if (result == XC_RESULT_SUCCESS) { |
aacb9d31 ST |
274 | /* wait for busy flag to clear */ |
275 | while ((WatchDogTimer > 0) && (result == XC_RESULT_SUCCESS)) { | |
276 | buf[0] = 0; | |
277 | buf[1] = XREG_BUSY; | |
278 | ||
279 | result = xc_send_i2c_data(priv, buf, 2); | |
280 | if (result == XC_RESULT_SUCCESS) { | |
281 | result = xc_read_i2c_data(priv, buf, 2); | |
282 | if (result == XC_RESULT_SUCCESS) { | |
283 | if ((buf[0] == 0) && (buf[1] == 0)) { | |
284 | /* busy flag cleared */ | |
285 | break; | |
286 | } else { | |
287 | xc_wait(100); /* wait 5 ms */ | |
288 | WatchDogTimer--; | |
289 | } | |
290 | } | |
291 | } | |
292 | } | |
293 | } | |
294 | if (WatchDogTimer < 0) | |
295 | result = XC_RESULT_I2C_WRITE_FAILURE; | |
296 | ||
297 | return result; | |
298 | } | |
299 | ||
c63e87e9 | 300 | static int xc_load_i2c_sequence(struct dvb_frontend *fe, const u8 *i2c_sequence) |
aacb9d31 ST |
301 | { |
302 | struct xc5000_priv *priv = fe->tuner_priv; | |
303 | ||
304 | int i, nbytes_to_send, result; | |
305 | unsigned int len, pos, index; | |
e12671cf | 306 | u8 buf[XC_MAX_I2C_WRITE_LENGTH]; |
aacb9d31 | 307 | |
8f3cd530 ST |
308 | index = 0; |
309 | while ((i2c_sequence[index] != 0xFF) || | |
310 | (i2c_sequence[index + 1] != 0xFF)) { | |
311 | len = i2c_sequence[index] * 256 + i2c_sequence[index+1]; | |
e12671cf | 312 | if (len == 0x0000) { |
aacb9d31 | 313 | /* RESET command */ |
91bd625e | 314 | result = xc5000_TunerReset(fe); |
aacb9d31 | 315 | index += 2; |
e12671cf | 316 | if (result != XC_RESULT_SUCCESS) |
aacb9d31 ST |
317 | return result; |
318 | } else if (len & 0x8000) { | |
319 | /* WAIT command */ | |
320 | xc_wait(len & 0x7FFF); | |
321 | index += 2; | |
322 | } else { | |
323 | /* Send i2c data whilst ensuring individual transactions | |
324 | * do not exceed XC_MAX_I2C_WRITE_LENGTH bytes. | |
325 | */ | |
326 | index += 2; | |
327 | buf[0] = i2c_sequence[index]; | |
328 | buf[1] = i2c_sequence[index + 1]; | |
329 | pos = 2; | |
330 | while (pos < len) { | |
8f3cd530 ST |
331 | if ((len - pos) > XC_MAX_I2C_WRITE_LENGTH - 2) |
332 | nbytes_to_send = | |
333 | XC_MAX_I2C_WRITE_LENGTH; | |
334 | else | |
aacb9d31 | 335 | nbytes_to_send = (len - pos + 2); |
8f3cd530 ST |
336 | for (i = 2; i < nbytes_to_send; i++) { |
337 | buf[i] = i2c_sequence[index + pos + | |
338 | i - 2]; | |
aacb9d31 | 339 | } |
8f3cd530 ST |
340 | result = xc_send_i2c_data(priv, buf, |
341 | nbytes_to_send); | |
aacb9d31 | 342 | |
e12671cf | 343 | if (result != XC_RESULT_SUCCESS) |
aacb9d31 ST |
344 | return result; |
345 | ||
346 | pos += nbytes_to_send - 2; | |
347 | } | |
348 | index += len; | |
349 | } | |
350 | } | |
351 | return XC_RESULT_SUCCESS; | |
352 | } | |
353 | ||
e12671cf | 354 | static int xc_initialize(struct xc5000_priv *priv) |
aacb9d31 | 355 | { |
271ddbf7 | 356 | dprintk(1, "%s()\n", __func__); |
aacb9d31 ST |
357 | return xc_write_reg(priv, XREG_INIT, 0); |
358 | } | |
359 | ||
e12671cf ST |
360 | static int xc_SetTVStandard(struct xc5000_priv *priv, |
361 | u16 VideoMode, u16 AudioMode) | |
aacb9d31 ST |
362 | { |
363 | int ret; | |
271ddbf7 | 364 | dprintk(1, "%s(0x%04x,0x%04x)\n", __func__, VideoMode, AudioMode); |
aacb9d31 | 365 | dprintk(1, "%s() Standard = %s\n", |
271ddbf7 | 366 | __func__, |
aacb9d31 ST |
367 | XC5000_Standard[priv->video_standard].Name); |
368 | ||
369 | ret = xc_write_reg(priv, XREG_VIDEO_MODE, VideoMode); | |
370 | if (ret == XC_RESULT_SUCCESS) | |
371 | ret = xc_write_reg(priv, XREG_AUDIO_MODE, AudioMode); | |
372 | ||
373 | return ret; | |
374 | } | |
375 | ||
e12671cf | 376 | static int xc_SetSignalSource(struct xc5000_priv *priv, u16 rf_mode) |
aacb9d31 | 377 | { |
271ddbf7 | 378 | dprintk(1, "%s(%d) Source = %s\n", __func__, rf_mode, |
aacb9d31 ST |
379 | rf_mode == XC_RF_MODE_AIR ? "ANTENNA" : "CABLE"); |
380 | ||
8f3cd530 | 381 | if ((rf_mode != XC_RF_MODE_AIR) && (rf_mode != XC_RF_MODE_CABLE)) { |
aacb9d31 ST |
382 | rf_mode = XC_RF_MODE_CABLE; |
383 | printk(KERN_ERR | |
384 | "%s(), Invalid mode, defaulting to CABLE", | |
271ddbf7 | 385 | __func__); |
aacb9d31 ST |
386 | } |
387 | return xc_write_reg(priv, XREG_SIGNALSOURCE, rf_mode); | |
388 | } | |
389 | ||
e12671cf | 390 | static const struct dvb_tuner_ops xc5000_tuner_ops; |
aacb9d31 | 391 | |
e12671cf ST |
392 | static int xc_set_RF_frequency(struct xc5000_priv *priv, u32 freq_hz) |
393 | { | |
394 | u16 freq_code; | |
aacb9d31 | 395 | |
271ddbf7 | 396 | dprintk(1, "%s(%u)\n", __func__, freq_hz); |
aacb9d31 | 397 | |
e12671cf ST |
398 | if ((freq_hz > xc5000_tuner_ops.info.frequency_max) || |
399 | (freq_hz < xc5000_tuner_ops.info.frequency_min)) | |
aacb9d31 ST |
400 | return XC_RESULT_OUT_OF_RANGE; |
401 | ||
e12671cf ST |
402 | freq_code = (u16)(freq_hz / 15625); |
403 | ||
81c4dfe7 DH |
404 | /* Starting in firmware version 1.1.44, Xceive recommends using the |
405 | FINERFREQ for all normal tuning (the doc indicates reg 0x03 should | |
406 | only be used for fast scanning for channel lock) */ | |
407 | return xc_write_reg(priv, XREG_FINERFREQ, freq_code); | |
aacb9d31 ST |
408 | } |
409 | ||
aacb9d31 | 410 | |
e12671cf ST |
411 | static int xc_set_IF_frequency(struct xc5000_priv *priv, u32 freq_khz) |
412 | { | |
413 | u32 freq_code = (freq_khz * 1024)/1000; | |
414 | dprintk(1, "%s(freq_khz = %d) freq_code = 0x%x\n", | |
271ddbf7 | 415 | __func__, freq_khz, freq_code); |
aacb9d31 | 416 | |
e12671cf | 417 | return xc_write_reg(priv, XREG_IF_OUT, freq_code); |
aacb9d31 ST |
418 | } |
419 | ||
aacb9d31 | 420 | |
e12671cf | 421 | static int xc_get_ADC_Envelope(struct xc5000_priv *priv, u16 *adc_envelope) |
aacb9d31 | 422 | { |
bdd33563 | 423 | return xc5000_readreg(priv, XREG_ADC_ENV, adc_envelope); |
aacb9d31 ST |
424 | } |
425 | ||
e12671cf | 426 | static int xc_get_frequency_error(struct xc5000_priv *priv, u32 *freq_error_hz) |
aacb9d31 ST |
427 | { |
428 | int result; | |
e12671cf | 429 | u16 regData; |
aacb9d31 ST |
430 | u32 tmp; |
431 | ||
bdd33563 | 432 | result = xc5000_readreg(priv, XREG_FREQ_ERROR, ®Data); |
7988fc21 | 433 | if (result != XC_RESULT_SUCCESS) |
aacb9d31 ST |
434 | return result; |
435 | ||
436 | tmp = (u32)regData; | |
e12671cf | 437 | (*freq_error_hz) = (tmp * 15625) / 1000; |
aacb9d31 ST |
438 | return result; |
439 | } | |
440 | ||
e12671cf | 441 | static int xc_get_lock_status(struct xc5000_priv *priv, u16 *lock_status) |
aacb9d31 | 442 | { |
bdd33563 | 443 | return xc5000_readreg(priv, XREG_LOCK, lock_status); |
aacb9d31 ST |
444 | } |
445 | ||
e12671cf ST |
446 | static int xc_get_version(struct xc5000_priv *priv, |
447 | u8 *hw_majorversion, u8 *hw_minorversion, | |
448 | u8 *fw_majorversion, u8 *fw_minorversion) | |
aacb9d31 | 449 | { |
e12671cf | 450 | u16 data; |
aacb9d31 ST |
451 | int result; |
452 | ||
bdd33563 | 453 | result = xc5000_readreg(priv, XREG_VERSION, &data); |
7988fc21 | 454 | if (result != XC_RESULT_SUCCESS) |
aacb9d31 ST |
455 | return result; |
456 | ||
e12671cf ST |
457 | (*hw_majorversion) = (data >> 12) & 0x0F; |
458 | (*hw_minorversion) = (data >> 8) & 0x0F; | |
459 | (*fw_majorversion) = (data >> 4) & 0x0F; | |
460 | (*fw_minorversion) = data & 0x0F; | |
aacb9d31 ST |
461 | |
462 | return 0; | |
463 | } | |
464 | ||
bae7b7d7 DH |
465 | static int xc_get_buildversion(struct xc5000_priv *priv, u16 *buildrev) |
466 | { | |
467 | return xc5000_readreg(priv, XREG_BUILD, buildrev); | |
468 | } | |
469 | ||
e12671cf | 470 | static int xc_get_hsync_freq(struct xc5000_priv *priv, u32 *hsync_freq_hz) |
aacb9d31 | 471 | { |
e12671cf | 472 | u16 regData; |
aacb9d31 ST |
473 | int result; |
474 | ||
bdd33563 | 475 | result = xc5000_readreg(priv, XREG_HSYNC_FREQ, ®Data); |
7988fc21 | 476 | if (result != XC_RESULT_SUCCESS) |
aacb9d31 ST |
477 | return result; |
478 | ||
479 | (*hsync_freq_hz) = ((regData & 0x0fff) * 763)/100; | |
480 | return result; | |
481 | } | |
482 | ||
e12671cf | 483 | static int xc_get_frame_lines(struct xc5000_priv *priv, u16 *frame_lines) |
aacb9d31 | 484 | { |
bdd33563 | 485 | return xc5000_readreg(priv, XREG_FRAME_LINES, frame_lines); |
aacb9d31 ST |
486 | } |
487 | ||
e12671cf | 488 | static int xc_get_quality(struct xc5000_priv *priv, u16 *quality) |
aacb9d31 | 489 | { |
bdd33563 | 490 | return xc5000_readreg(priv, XREG_QUALITY, quality); |
aacb9d31 ST |
491 | } |
492 | ||
e12671cf | 493 | static u16 WaitForLock(struct xc5000_priv *priv) |
aacb9d31 | 494 | { |
e12671cf | 495 | u16 lockState = 0; |
aacb9d31 | 496 | int watchDogCount = 40; |
e12671cf ST |
497 | |
498 | while ((lockState == 0) && (watchDogCount > 0)) { | |
aacb9d31 | 499 | xc_get_lock_status(priv, &lockState); |
e12671cf | 500 | if (lockState != 1) { |
aacb9d31 ST |
501 | xc_wait(5); |
502 | watchDogCount--; | |
503 | } | |
504 | } | |
505 | return lockState; | |
506 | } | |
507 | ||
a78baacf DH |
508 | #define XC_TUNE_ANALOG 0 |
509 | #define XC_TUNE_DIGITAL 1 | |
510 | static int xc_tune_channel(struct xc5000_priv *priv, u32 freq_hz, int mode) | |
aacb9d31 ST |
511 | { |
512 | int found = 0; | |
513 | ||
271ddbf7 | 514 | dprintk(1, "%s(%u)\n", __func__, freq_hz); |
aacb9d31 | 515 | |
e12671cf | 516 | if (xc_set_RF_frequency(priv, freq_hz) != XC_RESULT_SUCCESS) |
aacb9d31 ST |
517 | return 0; |
518 | ||
a78baacf DH |
519 | if (mode == XC_TUNE_ANALOG) { |
520 | if (WaitForLock(priv) == 1) | |
521 | found = 1; | |
522 | } | |
aacb9d31 ST |
523 | |
524 | return found; | |
525 | } | |
526 | ||
527 | static int xc5000_readreg(struct xc5000_priv *priv, u16 reg, u16 *val) | |
528 | { | |
529 | u8 buf[2] = { reg >> 8, reg & 0xff }; | |
530 | u8 bval[2] = { 0, 0 }; | |
531 | struct i2c_msg msg[2] = { | |
89fd2854 | 532 | { .addr = priv->i2c_props.addr, |
aacb9d31 | 533 | .flags = 0, .buf = &buf[0], .len = 2 }, |
89fd2854 | 534 | { .addr = priv->i2c_props.addr, |
aacb9d31 ST |
535 | .flags = I2C_M_RD, .buf = &bval[0], .len = 2 }, |
536 | }; | |
537 | ||
89fd2854 | 538 | if (i2c_transfer(priv->i2c_props.adap, msg, 2) != 2) { |
27c685a4 | 539 | printk(KERN_WARNING "xc5000: I2C read failed\n"); |
aacb9d31 ST |
540 | return -EREMOTEIO; |
541 | } | |
542 | ||
543 | *val = (bval[0] << 8) | bval[1]; | |
bdd33563 | 544 | return XC_RESULT_SUCCESS; |
aacb9d31 ST |
545 | } |
546 | ||
8f3cd530 | 547 | static int xc5000_fwupload(struct dvb_frontend *fe) |
aacb9d31 ST |
548 | { |
549 | struct xc5000_priv *priv = fe->tuner_priv; | |
550 | const struct firmware *fw; | |
551 | int ret; | |
552 | ||
e12671cf ST |
553 | /* request the firmware, this will block and timeout */ |
554 | printk(KERN_INFO "xc5000: waiting for firmware upload (%s)...\n", | |
555 | XC5000_DEFAULT_FIRMWARE); | |
556 | ||
8f3cd530 | 557 | ret = request_firmware(&fw, XC5000_DEFAULT_FIRMWARE, |
e9785250 | 558 | priv->i2c_props.adap->dev.parent); |
aacb9d31 ST |
559 | if (ret) { |
560 | printk(KERN_ERR "xc5000: Upload failed. (file not found?)\n"); | |
561 | ret = XC_RESULT_RESET_FAILURE; | |
5ea60531 | 562 | goto out; |
aacb9d31 | 563 | } else { |
34a0db92 | 564 | printk(KERN_DEBUG "xc5000: firmware read %Zu bytes.\n", |
3f51451b | 565 | fw->size); |
aacb9d31 ST |
566 | ret = XC_RESULT_SUCCESS; |
567 | } | |
568 | ||
e12671cf | 569 | if (fw->size != XC5000_DEFAULT_FIRMWARE_SIZE) { |
aacb9d31 ST |
570 | printk(KERN_ERR "xc5000: firmware incorrect size\n"); |
571 | ret = XC_RESULT_RESET_FAILURE; | |
572 | } else { | |
34a0db92 | 573 | printk(KERN_INFO "xc5000: firmware uploading...\n"); |
8f3cd530 | 574 | ret = xc_load_i2c_sequence(fe, fw->data); |
34a0db92 | 575 | printk(KERN_INFO "xc5000: firmware upload complete...\n"); |
aacb9d31 ST |
576 | } |
577 | ||
5ea60531 | 578 | out: |
aacb9d31 ST |
579 | release_firmware(fw); |
580 | return ret; | |
581 | } | |
582 | ||
e12671cf | 583 | static void xc_debug_dump(struct xc5000_priv *priv) |
aacb9d31 | 584 | { |
e12671cf ST |
585 | u16 adc_envelope; |
586 | u32 freq_error_hz = 0; | |
587 | u16 lock_status; | |
588 | u32 hsync_freq_hz = 0; | |
589 | u16 frame_lines; | |
590 | u16 quality; | |
591 | u8 hw_majorversion = 0, hw_minorversion = 0; | |
592 | u8 fw_majorversion = 0, fw_minorversion = 0; | |
bae7b7d7 | 593 | u16 fw_buildversion = 0; |
aacb9d31 ST |
594 | |
595 | /* Wait for stats to stabilize. | |
596 | * Frame Lines needs two frame times after initial lock | |
597 | * before it is valid. | |
598 | */ | |
e12671cf | 599 | xc_wait(100); |
aacb9d31 | 600 | |
e12671cf ST |
601 | xc_get_ADC_Envelope(priv, &adc_envelope); |
602 | dprintk(1, "*** ADC envelope (0-1023) = %d\n", adc_envelope); | |
aacb9d31 | 603 | |
e12671cf ST |
604 | xc_get_frequency_error(priv, &freq_error_hz); |
605 | dprintk(1, "*** Frequency error = %d Hz\n", freq_error_hz); | |
aacb9d31 | 606 | |
e12671cf ST |
607 | xc_get_lock_status(priv, &lock_status); |
608 | dprintk(1, "*** Lock status (0-Wait, 1-Locked, 2-No-signal) = %d\n", | |
aacb9d31 ST |
609 | lock_status); |
610 | ||
611 | xc_get_version(priv, &hw_majorversion, &hw_minorversion, | |
e12671cf | 612 | &fw_majorversion, &fw_minorversion); |
bae7b7d7 DH |
613 | xc_get_buildversion(priv, &fw_buildversion); |
614 | dprintk(1, "*** HW: V%02x.%02x, FW: V%02x.%02x.%04x\n", | |
aacb9d31 | 615 | hw_majorversion, hw_minorversion, |
bae7b7d7 | 616 | fw_majorversion, fw_minorversion, fw_buildversion); |
aacb9d31 | 617 | |
e12671cf ST |
618 | xc_get_hsync_freq(priv, &hsync_freq_hz); |
619 | dprintk(1, "*** Horizontal sync frequency = %d Hz\n", hsync_freq_hz); | |
aacb9d31 | 620 | |
e12671cf ST |
621 | xc_get_frame_lines(priv, &frame_lines); |
622 | dprintk(1, "*** Frame lines = %d\n", frame_lines); | |
aacb9d31 | 623 | |
e12671cf ST |
624 | xc_get_quality(priv, &quality); |
625 | dprintk(1, "*** Quality (0:<8dB, 7:>56dB) = %d\n", quality); | |
aacb9d31 ST |
626 | } |
627 | ||
628 | static int xc5000_set_params(struct dvb_frontend *fe, | |
629 | struct dvb_frontend_parameters *params) | |
630 | { | |
631 | struct xc5000_priv *priv = fe->tuner_priv; | |
e12671cf | 632 | int ret; |
aacb9d31 | 633 | |
8e4c6797 DH |
634 | if (xc5000_is_firmware_loaded(fe) != XC_RESULT_SUCCESS) |
635 | xc_load_fw_and_init_tuner(fe); | |
636 | ||
271ddbf7 | 637 | dprintk(1, "%s() frequency=%d (Hz)\n", __func__, params->frequency); |
aacb9d31 | 638 | |
8f3cd530 | 639 | switch (params->u.vsb.modulation) { |
aacb9d31 ST |
640 | case VSB_8: |
641 | case VSB_16: | |
271ddbf7 | 642 | dprintk(1, "%s() VSB modulation\n", __func__); |
aacb9d31 | 643 | priv->rf_mode = XC_RF_MODE_AIR; |
e12671cf ST |
644 | priv->freq_hz = params->frequency - 1750000; |
645 | priv->bandwidth = BANDWIDTH_6_MHZ; | |
646 | priv->video_standard = DTV6; | |
aacb9d31 ST |
647 | break; |
648 | case QAM_64: | |
649 | case QAM_256: | |
650 | case QAM_AUTO: | |
271ddbf7 | 651 | dprintk(1, "%s() QAM modulation\n", __func__); |
aacb9d31 | 652 | priv->rf_mode = XC_RF_MODE_CABLE; |
e12671cf ST |
653 | priv->freq_hz = params->frequency - 1750000; |
654 | priv->bandwidth = BANDWIDTH_6_MHZ; | |
655 | priv->video_standard = DTV6; | |
aacb9d31 ST |
656 | break; |
657 | default: | |
658 | return -EINVAL; | |
659 | } | |
660 | ||
661 | dprintk(1, "%s() frequency=%d (compensated)\n", | |
271ddbf7 | 662 | __func__, priv->freq_hz); |
aacb9d31 | 663 | |
e12671cf ST |
664 | ret = xc_SetSignalSource(priv, priv->rf_mode); |
665 | if (ret != XC_RESULT_SUCCESS) { | |
666 | printk(KERN_ERR | |
667 | "xc5000: xc_SetSignalSource(%d) failed\n", | |
668 | priv->rf_mode); | |
669 | return -EREMOTEIO; | |
670 | } | |
aacb9d31 | 671 | |
e12671cf | 672 | ret = xc_SetTVStandard(priv, |
aacb9d31 ST |
673 | XC5000_Standard[priv->video_standard].VideoMode, |
674 | XC5000_Standard[priv->video_standard].AudioMode); | |
e12671cf ST |
675 | if (ret != XC_RESULT_SUCCESS) { |
676 | printk(KERN_ERR "xc5000: xc_SetTVStandard failed\n"); | |
677 | return -EREMOTEIO; | |
678 | } | |
679 | ||
2a6003c2 | 680 | ret = xc_set_IF_frequency(priv, priv->if_khz); |
e12671cf ST |
681 | if (ret != XC_RESULT_SUCCESS) { |
682 | printk(KERN_ERR "xc5000: xc_Set_IF_frequency(%d) failed\n", | |
2a6003c2 | 683 | priv->if_khz); |
e12671cf ST |
684 | return -EIO; |
685 | } | |
686 | ||
a78baacf | 687 | xc_tune_channel(priv, priv->freq_hz, XC_TUNE_DIGITAL); |
aacb9d31 | 688 | |
e12671cf ST |
689 | if (debug) |
690 | xc_debug_dump(priv); | |
aacb9d31 ST |
691 | |
692 | return 0; | |
693 | } | |
694 | ||
e470d817 ST |
695 | static int xc5000_is_firmware_loaded(struct dvb_frontend *fe) |
696 | { | |
697 | struct xc5000_priv *priv = fe->tuner_priv; | |
698 | int ret; | |
699 | u16 id; | |
700 | ||
701 | ret = xc5000_readreg(priv, XREG_PRODUCT_ID, &id); | |
702 | if (ret == XC_RESULT_SUCCESS) { | |
703 | if (id == XC_PRODUCT_ID_FW_NOT_LOADED) | |
704 | ret = XC_RESULT_RESET_FAILURE; | |
705 | else | |
706 | ret = XC_RESULT_SUCCESS; | |
707 | } | |
708 | ||
709 | dprintk(1, "%s() returns %s id = 0x%x\n", __func__, | |
710 | ret == XC_RESULT_SUCCESS ? "True" : "False", id); | |
711 | return ret; | |
712 | } | |
713 | ||
27c685a4 ST |
714 | static int xc5000_set_analog_params(struct dvb_frontend *fe, |
715 | struct analog_parameters *params) | |
716 | { | |
717 | struct xc5000_priv *priv = fe->tuner_priv; | |
718 | int ret; | |
719 | ||
e470d817 | 720 | if (xc5000_is_firmware_loaded(fe) != XC_RESULT_SUCCESS) |
27c685a4 ST |
721 | xc_load_fw_and_init_tuner(fe); |
722 | ||
723 | dprintk(1, "%s() frequency=%d (in units of 62.5khz)\n", | |
271ddbf7 | 724 | __func__, params->frequency); |
27c685a4 | 725 | |
1fab14ed MCC |
726 | /* Fix me: it could be air. */ |
727 | priv->rf_mode = params->mode; | |
728 | if (params->mode > XC_RF_MODE_CABLE) | |
729 | priv->rf_mode = XC_RF_MODE_CABLE; | |
27c685a4 ST |
730 | |
731 | /* params->frequency is in units of 62.5khz */ | |
732 | priv->freq_hz = params->frequency * 62500; | |
733 | ||
734 | /* FIX ME: Some video standards may have several possible audio | |
735 | standards. We simply default to one of them here. | |
736 | */ | |
8f3cd530 | 737 | if (params->std & V4L2_STD_MN) { |
27c685a4 ST |
738 | /* default to BTSC audio standard */ |
739 | priv->video_standard = MN_NTSC_PAL_BTSC; | |
740 | goto tune_channel; | |
741 | } | |
742 | ||
8f3cd530 | 743 | if (params->std & V4L2_STD_PAL_BG) { |
27c685a4 ST |
744 | /* default to NICAM audio standard */ |
745 | priv->video_standard = BG_PAL_NICAM; | |
746 | goto tune_channel; | |
747 | } | |
748 | ||
8f3cd530 | 749 | if (params->std & V4L2_STD_PAL_I) { |
27c685a4 ST |
750 | /* default to NICAM audio standard */ |
751 | priv->video_standard = I_PAL_NICAM; | |
752 | goto tune_channel; | |
753 | } | |
754 | ||
8f3cd530 | 755 | if (params->std & V4L2_STD_PAL_DK) { |
27c685a4 ST |
756 | /* default to NICAM audio standard */ |
757 | priv->video_standard = DK_PAL_NICAM; | |
758 | goto tune_channel; | |
759 | } | |
760 | ||
8f3cd530 | 761 | if (params->std & V4L2_STD_SECAM_DK) { |
27c685a4 ST |
762 | /* default to A2 DK1 audio standard */ |
763 | priv->video_standard = DK_SECAM_A2DK1; | |
764 | goto tune_channel; | |
765 | } | |
766 | ||
8f3cd530 | 767 | if (params->std & V4L2_STD_SECAM_L) { |
27c685a4 ST |
768 | priv->video_standard = L_SECAM_NICAM; |
769 | goto tune_channel; | |
770 | } | |
771 | ||
8f3cd530 | 772 | if (params->std & V4L2_STD_SECAM_LC) { |
27c685a4 ST |
773 | priv->video_standard = LC_SECAM_NICAM; |
774 | goto tune_channel; | |
775 | } | |
776 | ||
777 | tune_channel: | |
778 | ret = xc_SetSignalSource(priv, priv->rf_mode); | |
779 | if (ret != XC_RESULT_SUCCESS) { | |
8f3cd530 | 780 | printk(KERN_ERR |
27c685a4 ST |
781 | "xc5000: xc_SetSignalSource(%d) failed\n", |
782 | priv->rf_mode); | |
783 | return -EREMOTEIO; | |
784 | } | |
785 | ||
786 | ret = xc_SetTVStandard(priv, | |
787 | XC5000_Standard[priv->video_standard].VideoMode, | |
788 | XC5000_Standard[priv->video_standard].AudioMode); | |
789 | if (ret != XC_RESULT_SUCCESS) { | |
790 | printk(KERN_ERR "xc5000: xc_SetTVStandard failed\n"); | |
791 | return -EREMOTEIO; | |
792 | } | |
793 | ||
a78baacf | 794 | xc_tune_channel(priv, priv->freq_hz, XC_TUNE_ANALOG); |
27c685a4 ST |
795 | |
796 | if (debug) | |
797 | xc_debug_dump(priv); | |
798 | ||
799 | return 0; | |
800 | } | |
801 | ||
aacb9d31 ST |
802 | static int xc5000_get_frequency(struct dvb_frontend *fe, u32 *freq) |
803 | { | |
804 | struct xc5000_priv *priv = fe->tuner_priv; | |
271ddbf7 | 805 | dprintk(1, "%s()\n", __func__); |
e12671cf | 806 | *freq = priv->freq_hz; |
aacb9d31 ST |
807 | return 0; |
808 | } | |
809 | ||
810 | static int xc5000_get_bandwidth(struct dvb_frontend *fe, u32 *bw) | |
811 | { | |
812 | struct xc5000_priv *priv = fe->tuner_priv; | |
271ddbf7 | 813 | dprintk(1, "%s()\n", __func__); |
27c685a4 | 814 | |
aacb9d31 ST |
815 | *bw = priv->bandwidth; |
816 | return 0; | |
817 | } | |
818 | ||
819 | static int xc5000_get_status(struct dvb_frontend *fe, u32 *status) | |
820 | { | |
821 | struct xc5000_priv *priv = fe->tuner_priv; | |
e12671cf | 822 | u16 lock_status = 0; |
aacb9d31 ST |
823 | |
824 | xc_get_lock_status(priv, &lock_status); | |
825 | ||
271ddbf7 | 826 | dprintk(1, "%s() lock_status = 0x%08x\n", __func__, lock_status); |
aacb9d31 ST |
827 | |
828 | *status = lock_status; | |
829 | ||
830 | return 0; | |
831 | } | |
832 | ||
e12671cf | 833 | static int xc_load_fw_and_init_tuner(struct dvb_frontend *fe) |
aacb9d31 ST |
834 | { |
835 | struct xc5000_priv *priv = fe->tuner_priv; | |
27c685a4 | 836 | int ret = 0; |
aacb9d31 | 837 | |
e470d817 | 838 | if (xc5000_is_firmware_loaded(fe) != XC_RESULT_SUCCESS) { |
aacb9d31 | 839 | ret = xc5000_fwupload(fe); |
e12671cf ST |
840 | if (ret != XC_RESULT_SUCCESS) |
841 | return ret; | |
aacb9d31 ST |
842 | } |
843 | ||
844 | /* Start the tuner self-calibration process */ | |
845 | ret |= xc_initialize(priv); | |
846 | ||
847 | /* Wait for calibration to complete. | |
848 | * We could continue but XC5000 will clock stretch subsequent | |
849 | * I2C transactions until calibration is complete. This way we | |
850 | * don't have to rely on clock stretching working. | |
851 | */ | |
8f3cd530 | 852 | xc_wait(100); |
aacb9d31 ST |
853 | |
854 | /* Default to "CABLE" mode */ | |
855 | ret |= xc_write_reg(priv, XREG_SIGNALSOURCE, XC_RF_MODE_CABLE); | |
856 | ||
857 | return ret; | |
858 | } | |
859 | ||
e12671cf ST |
860 | static int xc5000_sleep(struct dvb_frontend *fe) |
861 | { | |
27c685a4 ST |
862 | int ret; |
863 | ||
271ddbf7 | 864 | dprintk(1, "%s()\n", __func__); |
e12671cf | 865 | |
b6bd5eb8 DH |
866 | /* Avoid firmware reload on slow devices */ |
867 | if (no_poweroff) | |
868 | return 0; | |
869 | ||
7f05b530 DH |
870 | /* According to Xceive technical support, the "powerdown" register |
871 | was removed in newer versions of the firmware. The "supported" | |
872 | way to sleep the tuner is to pull the reset pin low for 10ms */ | |
873 | ret = xc5000_TunerReset(fe); | |
8f3cd530 | 874 | if (ret != XC_RESULT_SUCCESS) { |
27c685a4 ST |
875 | printk(KERN_ERR |
876 | "xc5000: %s() unable to shutdown tuner\n", | |
271ddbf7 | 877 | __func__); |
27c685a4 | 878 | return -EREMOTEIO; |
8f3cd530 | 879 | } else |
27c685a4 | 880 | return XC_RESULT_SUCCESS; |
e12671cf ST |
881 | } |
882 | ||
aacb9d31 ST |
883 | static int xc5000_init(struct dvb_frontend *fe) |
884 | { | |
885 | struct xc5000_priv *priv = fe->tuner_priv; | |
271ddbf7 | 886 | dprintk(1, "%s()\n", __func__); |
aacb9d31 | 887 | |
e12671cf ST |
888 | if (xc_load_fw_and_init_tuner(fe) != XC_RESULT_SUCCESS) { |
889 | printk(KERN_ERR "xc5000: Unable to initialise tuner\n"); | |
890 | return -EREMOTEIO; | |
891 | } | |
892 | ||
893 | if (debug) | |
894 | xc_debug_dump(priv); | |
aacb9d31 ST |
895 | |
896 | return 0; | |
897 | } | |
898 | ||
899 | static int xc5000_release(struct dvb_frontend *fe) | |
900 | { | |
89fd2854 MK |
901 | struct xc5000_priv *priv = fe->tuner_priv; |
902 | ||
271ddbf7 | 903 | dprintk(1, "%s()\n", __func__); |
89fd2854 MK |
904 | |
905 | mutex_lock(&xc5000_list_mutex); | |
906 | ||
907 | if (priv) | |
908 | hybrid_tuner_release_state(priv); | |
909 | ||
910 | mutex_unlock(&xc5000_list_mutex); | |
911 | ||
aacb9d31 | 912 | fe->tuner_priv = NULL; |
89fd2854 | 913 | |
aacb9d31 ST |
914 | return 0; |
915 | } | |
916 | ||
917 | static const struct dvb_tuner_ops xc5000_tuner_ops = { | |
918 | .info = { | |
919 | .name = "Xceive XC5000", | |
920 | .frequency_min = 1000000, | |
921 | .frequency_max = 1023000000, | |
922 | .frequency_step = 50000, | |
923 | }, | |
924 | ||
27c685a4 ST |
925 | .release = xc5000_release, |
926 | .init = xc5000_init, | |
927 | .sleep = xc5000_sleep, | |
aacb9d31 | 928 | |
27c685a4 ST |
929 | .set_params = xc5000_set_params, |
930 | .set_analog_params = xc5000_set_analog_params, | |
931 | .get_frequency = xc5000_get_frequency, | |
932 | .get_bandwidth = xc5000_get_bandwidth, | |
933 | .get_status = xc5000_get_status | |
aacb9d31 ST |
934 | }; |
935 | ||
48723543 MK |
936 | struct dvb_frontend *xc5000_attach(struct dvb_frontend *fe, |
937 | struct i2c_adapter *i2c, | |
30650961 | 938 | struct xc5000_config *cfg) |
aacb9d31 ST |
939 | { |
940 | struct xc5000_priv *priv = NULL; | |
89fd2854 | 941 | int instance; |
aacb9d31 ST |
942 | u16 id = 0; |
943 | ||
89fd2854 MK |
944 | dprintk(1, "%s(%d-%04x)\n", __func__, |
945 | i2c ? i2c_adapter_id(i2c) : -1, | |
946 | cfg ? cfg->i2c_address : -1); | |
aacb9d31 | 947 | |
89fd2854 | 948 | mutex_lock(&xc5000_list_mutex); |
aacb9d31 | 949 | |
89fd2854 MK |
950 | instance = hybrid_tuner_request_state(struct xc5000_priv, priv, |
951 | hybrid_tuner_instance_list, | |
952 | i2c, cfg->i2c_address, "xc5000"); | |
953 | switch (instance) { | |
954 | case 0: | |
955 | goto fail; | |
956 | break; | |
957 | case 1: | |
958 | /* new tuner instance */ | |
89fd2854 | 959 | priv->bandwidth = BANDWIDTH_6_MHZ; |
89fd2854 MK |
960 | fe->tuner_priv = priv; |
961 | break; | |
962 | default: | |
963 | /* existing tuner instance */ | |
964 | fe->tuner_priv = priv; | |
965 | break; | |
966 | } | |
aacb9d31 | 967 | |
ea227863 DH |
968 | if (priv->if_khz == 0) { |
969 | /* If the IF hasn't been set yet, use the value provided by | |
970 | the caller (occurs in hybrid devices where the analog | |
971 | call to xc5000_attach occurs before the digital side) */ | |
972 | priv->if_khz = cfg->if_khz; | |
973 | } | |
974 | ||
27c685a4 ST |
975 | /* Check if firmware has been loaded. It is possible that another |
976 | instance of the driver has loaded the firmware. | |
977 | */ | |
7988fc21 | 978 | if (xc5000_readreg(priv, XREG_PRODUCT_ID, &id) != XC_RESULT_SUCCESS) |
89fd2854 | 979 | goto fail; |
aacb9d31 | 980 | |
8f3cd530 | 981 | switch (id) { |
27c685a4 ST |
982 | case XC_PRODUCT_ID_FW_LOADED: |
983 | printk(KERN_INFO | |
984 | "xc5000: Successfully identified at address 0x%02x\n", | |
985 | cfg->i2c_address); | |
986 | printk(KERN_INFO | |
987 | "xc5000: Firmware has been loaded previously\n"); | |
27c685a4 ST |
988 | break; |
989 | case XC_PRODUCT_ID_FW_NOT_LOADED: | |
990 | printk(KERN_INFO | |
991 | "xc5000: Successfully identified at address 0x%02x\n", | |
992 | cfg->i2c_address); | |
993 | printk(KERN_INFO | |
994 | "xc5000: Firmware has not been loaded previously\n"); | |
27c685a4 ST |
995 | break; |
996 | default: | |
aacb9d31 ST |
997 | printk(KERN_ERR |
998 | "xc5000: Device not found at addr 0x%02x (0x%x)\n", | |
999 | cfg->i2c_address, id); | |
89fd2854 | 1000 | goto fail; |
aacb9d31 ST |
1001 | } |
1002 | ||
89fd2854 MK |
1003 | mutex_unlock(&xc5000_list_mutex); |
1004 | ||
aacb9d31 ST |
1005 | memcpy(&fe->ops.tuner_ops, &xc5000_tuner_ops, |
1006 | sizeof(struct dvb_tuner_ops)); | |
1007 | ||
aacb9d31 | 1008 | return fe; |
89fd2854 MK |
1009 | fail: |
1010 | mutex_unlock(&xc5000_list_mutex); | |
1011 | ||
1012 | xc5000_release(fe); | |
1013 | return NULL; | |
aacb9d31 ST |
1014 | } |
1015 | EXPORT_SYMBOL(xc5000_attach); | |
1016 | ||
1017 | MODULE_AUTHOR("Steven Toth"); | |
e12671cf | 1018 | MODULE_DESCRIPTION("Xceive xc5000 silicon tuner driver"); |
aacb9d31 | 1019 | MODULE_LICENSE("GPL"); |