[deliverable/linux.git] / drivers / media / dvb / dvb-usb / rtl28xxu.h

/*
 * Realtek RTL28xxU DVB USB driver
 *
 * Copyright (C) 2009 Antti Palosaari <crope@iki.fi>
 * Copyright (C) 2011 Antti Palosaari <crope@iki.fi>
 *
 *    This program is free software; you can redistribute it and/or modify
 *    it under the terms of the GNU General Public License as published by
 *    the Free Software Foundation; either version 2 of the License, or
 *    (at your option) any later version.
 *
 *    This program is distributed in the hope that it will be useful,
 *    but WITHOUT ANY WARRANTY; without even the implied warranty of
 *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *    GNU General Public License for more details.
 *
 *    You should have received a copy of the GNU General Public License along
 *    with this program; if not, write to the Free Software Foundation, Inc.,
 *    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 */

#ifndef RTL28XXU_H
#define RTL28XXU_H

#define DVB_USB_LOG_PREFIX "rtl28xxu"
#include "dvb-usb.h"

#define deb_info(args...) dprintk(dvb_usb_rtl28xxu_debug, 0x01, args)
#define deb_rc(args...)   dprintk(dvb_usb_rtl28xxu_debug, 0x02, args)
#define deb_xfer(args...) dprintk(dvb_usb_rtl28xxu_debug, 0x04, args)
#define deb_reg(args...)  dprintk(dvb_usb_rtl28xxu_debug, 0x08, args)
#define deb_i2c(args...)  dprintk(dvb_usb_rtl28xxu_debug, 0x10, args)
#define deb_fw(args...)   dprintk(dvb_usb_rtl28xxu_debug, 0x20, args)

#define deb_dump(r, t, v, i, b, l, func) { \
	int loop_; \
	func("%02x %02x %02x %02x %02x %02x %02x %02x", \
		t, r, v & 0xff, v >> 8, i & 0xff, i >> 8, l & 0xff, l >> 8); \
	if (t == (USB_TYPE_VENDOR | USB_DIR_OUT)) \
		func(" >>> "); \
	else \
		func(" <<< "); \
	for (loop_ = 0; loop_ < l; loop_++) \
		func("%02x ", b[loop_]); \
	func("\n");\
}

/*
 * USB commands
 * (usb_control_msg() index parameter)
 */
#define DEMOD  (0x00 << 8)
#define USB    (0x01 << 8)
#define SYS    (0x02 << 8)
#define I2C    (0x03 << 8)
#define I2C_DA (0x06 << 8)

#define CMD_WR_FLAG   0x10
#define CMD_DEMOD_RD  (DEMOD)
#define CMD_DEMOD_WR  (DEMOD | CMD_WR_FLAG)
#define CMD_USB_RD    (USB)
#define CMD_USB_WR    (USB | CMD_WR_FLAG)
#define CMD_SYS_RD    (SYS)
#define CMD_IR_RD     (CMD_SYS_RD | 0x01)
#define CMD_IR_WR     (CMD_SYS_WR | 0x01)
#define CMD_SYS_WR    (SYS | CMD_WR_FLAG)
#define CMD_I2C_RD    (I2C)
#define CMD_I2C_WR    (I2C | CMD_WR_FLAG)
#define CMD_I2C_DA_RD (I2C_DA)
#define CMD_I2C_DA_WR (I2C_DA | CMD_WR_FLAG)

struct rtl28xxu_priv {
	u8 chip_id;
	u8 tuner;
	u8 page; /* integrated demod active register page */
	bool rc_active;
};

enum rtl28xxu_chip_id {
	CHIP_ID_NONE = 0,
	CHIP_ID_RTL2831U,
	CHIP_ID_RTL2832U,
};

enum rtl28xxu_tuner {
	TUNER_NONE = 0,

	TUNER_RTL2830_QT1010,
	TUNER_RTL2830_MT2060,
	TUNER_RTL2830_MXL5005S,

	TUNER_RTL2832_MT2266,
	TUNER_RTL2832_FC2580,
	TUNER_RTL2832_MT2063,
	TUNER_RTL2832_MAX3543,
	TUNER_RTL2832_TUA9001,
	TUNER_RTL2832_MXL5007T,
	TUNER_RTL2832_FC0012,
	TUNER_RTL2832_E4000,
	TUNER_RTL2832_TDA18272,
	TUNER_RTL2832_FC0013,
};

struct rtl28xxu_req {
	u16 value;
	u16 index;
	u16 size;
	u8 *data;
};

struct rtl28xxu_reg_val {
	u16 reg;
	u8 val;
};

/*
 * memory map
 *
 * 0x0000 DEMOD : demodulator
 * 0x2000 USB   : SIE, USB endpoint, debug, DMA
 * 0x3000 SYS   : system
 * 0xfc00 RC    : remote controller (not RTL2831U)
 */

/*
 * USB registers
 */
/* SIE Control Registers */
#define USB_SYSCTL         0x2000 /* USB system control */
#define USB_SYSCTL_0       0x2000 /* USB system control */
#define USB_SYSCTL_1       0x2001 /* USB system control */
#define USB_SYSCTL_2       0x2002 /* USB system control */
#define USB_SYSCTL_3       0x2003 /* USB system control */
#define USB_IRQSTAT        0x2008 /* SIE interrupt status */
#define USB_IRQEN          0x200C /* SIE interrupt enable */
#define USB_CTRL           0x2010 /* USB control */
#define USB_STAT           0x2014 /* USB status */
#define USB_DEVADDR        0x2018 /* USB device address */
#define USB_TEST           0x201C /* USB test mode */
#define USB_FRAME_NUMBER   0x2020 /* frame number */
#define USB_FIFO_ADDR      0x2028 /* address of SIE FIFO RAM */
#define USB_FIFO_CMD       0x202A /* SIE FIFO RAM access command */
#define USB_FIFO_DATA      0x2030 /* SIE FIFO RAM data */
/* Endpoint Registers */
#define EP0_SETUPA         0x20F8 /* EP 0 setup packet lower byte */
#define EP0_SETUPB         0x20FC /* EP 0 setup packet higher byte */
#define USB_EP0_CFG        0x2104 /* EP 0 configure */
#define USB_EP0_CTL        0x2108 /* EP 0 control */
#define USB_EP0_STAT       0x210C /* EP 0 status */
#define USB_EP0_IRQSTAT    0x2110 /* EP 0 interrupt status */
#define USB_EP0_IRQEN      0x2114 /* EP 0 interrupt enable */
#define USB_EP0_MAXPKT     0x2118 /* EP 0 max packet size */
#define USB_EP0_BC         0x2120 /* EP 0 FIFO byte counter */
#define USB_EPA_CFG        0x2144 /* EP A configure */
#define USB_EPA_CFG_0      0x2144 /* EP A configure */
#define USB_EPA_CFG_1      0x2145 /* EP A configure */
#define USB_EPA_CFG_2      0x2146 /* EP A configure */
#define USB_EPA_CFG_3      0x2147 /* EP A configure */
#define USB_EPA_CTL        0x2148 /* EP A control */
#define USB_EPA_CTL_0      0x2148 /* EP A control */
#define USB_EPA_CTL_1      0x2149 /* EP A control */
#define USB_EPA_CTL_2      0x214A /* EP A control */
#define USB_EPA_CTL_3      0x214B /* EP A control */
#define USB_EPA_STAT       0x214C /* EP A status */
#define USB_EPA_IRQSTAT    0x2150 /* EP A interrupt status */
#define USB_EPA_IRQEN      0x2154 /* EP A interrupt enable */
#define USB_EPA_MAXPKT     0x2158 /* EP A max packet size */
#define USB_EPA_MAXPKT_0   0x2158 /* EP A max packet size */
#define USB_EPA_MAXPKT_1   0x2159 /* EP A max packet size */
#define USB_EPA_MAXPKT_2   0x215A /* EP A max packet size */
#define USB_EPA_MAXPKT_3   0x215B /* EP A max packet size */
#define USB_EPA_FIFO_CFG   0x2160 /* EP A FIFO configure */
#define USB_EPA_FIFO_CFG_0 0x2160 /* EP A FIFO configure */
#define USB_EPA_FIFO_CFG_1 0x2161 /* EP A FIFO configure */
#define USB_EPA_FIFO_CFG_2 0x2162 /* EP A FIFO configure */
#define USB_EPA_FIFO_CFG_3 0x2163 /* EP A FIFO configure */
/* Debug Registers */
#define USB_PHYTSTDIS      0x2F04 /* PHY test disable */
#define USB_TOUT_VAL       0x2F08 /* USB time-out time */
#define USB_VDRCTRL        0x2F10 /* UTMI vendor signal control */
#define USB_VSTAIN         0x2F14 /* UTMI vendor signal status in */
#define USB_VLOADM         0x2F18 /* UTMI load vendor signal status in */
#define USB_VSTAOUT        0x2F1C /* UTMI vendor signal status out */
#define USB_UTMI_TST       0x2F80 /* UTMI test */
#define USB_UTMI_STATUS    0x2F84 /* UTMI status */
#define USB_TSTCTL         0x2F88 /* test control */
#define USB_TSTCTL2        0x2F8C /* test control 2 */
#define USB_PID_FORCE      0x2F90 /* force PID */
#define USB_PKTERR_CNT     0x2F94 /* packet error counter */
#define USB_RXERR_CNT      0x2F98 /* RX error counter */
#define USB_MEM_BIST       0x2F9C /* MEM BIST test */
#define USB_SLBBIST        0x2FA0 /* self-loop-back BIST */
#define USB_CNTTEST        0x2FA4 /* counter test */
#define USB_PHYTST         0x2FC0 /* USB PHY test */
#define USB_DBGIDX         0x2FF0 /* select individual block debug signal */
#define USB_DBGMUX         0x2FF4 /* debug signal module mux */

/*
 * SYS registers
 */
/* demod control registers */
#define SYS_SYS0           0x3000 /* include DEMOD_CTL, GPO, GPI, GPOE */
#define SYS_DEMOD_CTL      0x3000 /* control register for DVB-T demodulator */
/* GPIO registers */
#define SYS_GPIO_OUT_VAL   0x3001 /* output value of GPIO */
#define SYS_GPIO_IN_VAL    0x3002 /* input value of GPIO */
#define SYS_GPIO_OUT_EN    0x3003 /* output enable of GPIO */
#define SYS_SYS1           0x3004 /* include GPD, SYSINTE, SYSINTS, GP_CFG0 */
#define SYS_GPIO_DIR       0x3004 /* direction control for GPIO */
#define SYS_SYSINTE        0x3005 /* system interrupt enable */
#define SYS_SYSINTS        0x3006 /* system interrupt status */
#define SYS_GPIO_CFG0      0x3007 /* PAD configuration for GPIO0-GPIO3 */
#define SYS_SYS2           0x3008 /* include GP_CFG1 and 3 reserved bytes */
#define SYS_GPIO_CFG1      0x3008 /* PAD configuration for GPIO4 */
#define SYS_DEMOD_CTL1     0x300B

/* IrDA registers */
#define SYS_IRRC_PSR       0x3020 /* IR protocol selection */
#define SYS_IRRC_PER       0x3024 /* IR protocol extension */
#define SYS_IRRC_SF        0x3028 /* IR sampling frequency */
#define SYS_IRRC_DPIR      0x302C /* IR data package interval */
#define SYS_IRRC_CR        0x3030 /* IR control */
#define SYS_IRRC_RP        0x3034 /* IR read port */
#define SYS_IRRC_SR        0x3038 /* IR status */
/* I2C master registers */
#define SYS_I2CCR          0x3040 /* I2C clock */
#define SYS_I2CMCR         0x3044 /* I2C master control */
#define SYS_I2CMSTR        0x3048 /* I2C master SCL timing */
#define SYS_I2CMSR         0x304C /* I2C master status */
#define SYS_I2CMFR         0x3050 /* I2C master FIFO */

/*
 * IR registers
 */
#define IR_RX_BUF          0xFC00
#define IR_RX_IE           0xFD00
#define IR_RX_IF           0xFD01
#define IR_RX_CTRL         0xFD02
#define IR_RX_CFG          0xFD03
#define IR_MAX_DURATION0   0xFD04
#define IR_MAX_DURATION1   0xFD05
#define IR_IDLE_LEN0       0xFD06
#define IR_IDLE_LEN1       0xFD07
#define IR_GLITCH_LEN      0xFD08
#define IR_RX_BUF_CTRL     0xFD09
#define IR_RX_BUF_DATA     0xFD0A
#define IR_RX_BC           0xFD0B
#define IR_RX_CLK          0xFD0C
#define IR_RX_C_COUNT_L    0xFD0D
#define IR_RX_C_COUNT_H    0xFD0E
#define IR_SUSPEND_CTRL    0xFD10
#define IR_ERR_TOL_CTRL    0xFD11
#define IR_UNIT_LEN        0xFD12
#define IR_ERR_TOL_LEN     0xFD13
#define IR_MAX_H_TOL_LEN   0xFD14
#define IR_MAX_L_TOL_LEN   0xFD15
#define IR_MASK_CTRL       0xFD16
#define IR_MASK_DATA       0xFD17
#define IR_RES_MASK_ADDR   0xFD18
#define IR_RES_MASK_T_LEN  0xFD19

#endif
Commit	Line	Data
831e0b71 AP	1	/*
	2	* Realtek RTL28xxU DVB USB driver
	3	*
	4	* Copyright (C) 2009 Antti Palosaari <crope@iki.fi>
	5	* Copyright (C) 2011 Antti Palosaari <crope@iki.fi>
	6	*
	7	* This program is free software; you can redistribute it and/or modify
	8	* it under the terms of the GNU General Public License as published by
	9	* the Free Software Foundation; either version 2 of the License, or
	10	* (at your option) any later version.
	11	*
	12	* This program is distributed in the hope that it will be useful,
	13	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	14	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	15	* GNU General Public License for more details.
	16	*
	17	* You should have received a copy of the GNU General Public License along
	18	* with this program; if not, write to the Free Software Foundation, Inc.,
	19	* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
	20	*/
	21
	22	#ifndef RTL28XXU_H
	23	#define RTL28XXU_H
	24
	25	#define DVB_USB_LOG_PREFIX "rtl28xxu"
	26	#include "dvb-usb.h"
	27
	28	#define deb_info(args...) dprintk(dvb_usb_rtl28xxu_debug, 0x01, args)
	29	#define deb_rc(args...) dprintk(dvb_usb_rtl28xxu_debug, 0x02, args)
	30	#define deb_xfer(args...) dprintk(dvb_usb_rtl28xxu_debug, 0x04, args)
	31	#define deb_reg(args...) dprintk(dvb_usb_rtl28xxu_debug, 0x08, args)
	32	#define deb_i2c(args...) dprintk(dvb_usb_rtl28xxu_debug, 0x10, args)
	33	#define deb_fw(args...) dprintk(dvb_usb_rtl28xxu_debug, 0x20, args)
	34
	35	#define deb_dump(r, t, v, i, b, l, func) { \
	36	int loop_; \
	37	func("%02x %02x %02x %02x %02x %02x %02x %02x", \
	38	t, r, v & 0xff, v >> 8, i & 0xff, i >> 8, l & 0xff, l >> 8); \
	39	if (t == (USB_TYPE_VENDOR \| USB_DIR_OUT)) \
	40	func(" >>> "); \
	41	else \
	42	func(" <<< "); \
	43	for (loop_ = 0; loop_ < l; loop_++) \
	44	func("%02x ", b[loop_]); \
	45	func("\n");\
	46	}
	47
	48	/*
	49	* USB commands
	50	* (usb_control_msg() index parameter)
	51	*/
34ec2933 AP	52	#define DEMOD (0x00 << 8)
	53	#define USB (0x01 << 8)
	54	#define SYS (0x02 << 8)
	55	#define I2C (0x03 << 8)
	56	#define I2C_DA (0x06 << 8)
	57
831e0b71 AP	58	#define CMD_WR_FLAG 0x10
	59	#define CMD_DEMOD_RD (DEMOD)
	60	#define CMD_DEMOD_WR (DEMOD \| CMD_WR_FLAG)
	61	#define CMD_USB_RD (USB)
	62	#define CMD_USB_WR (USB \| CMD_WR_FLAG)
	63	#define CMD_SYS_RD (SYS)
34ec2933 AP	64	#define CMD_IR_RD (CMD_SYS_RD \| 0x01)
34ec2933 AP	65	#define CMD_IR_WR (CMD_SYS_WR \| 0x01)
831e0b71 AP	66	#define CMD_SYS_WR (SYS \| CMD_WR_FLAG)
	67	#define CMD_I2C_RD (I2C)
	68	#define CMD_I2C_WR (I2C \| CMD_WR_FLAG)
34ec2933 AP	69	#define CMD_I2C_DA_RD (I2C_DA)
34ec2933 AP	70	#define CMD_I2C_DA_WR (I2C_DA \| CMD_WR_FLAG)
831e0b71 AP	71
	72	struct rtl28xxu_priv {
	73	u8 chip_id;
	74	u8 tuner;
34ec2933	75	u8 page; /* integrated demod active register page */
b5cbaa43	76	bool rc_active;
831e0b71 AP	77	};
	78
	79	enum rtl28xxu_chip_id {
	80	CHIP_ID_NONE = 0,
	81	CHIP_ID_RTL2831U,
	82	CHIP_ID_RTL2832U,
	83	};
	84
	85	enum rtl28xxu_tuner {
	86	TUNER_NONE = 0,
b5cbaa43	87
831e0b71 AP	88	TUNER_RTL2830_QT1010,
	89	TUNER_RTL2830_MT2060,
	90	TUNER_RTL2830_MXL5005S,
b5cbaa43 AP	91
	92	TUNER_RTL2832_MT2266,
	93	TUNER_RTL2832_FC2580,
	94	TUNER_RTL2832_MT2063,
	95	TUNER_RTL2832_MAX3543,
	96	TUNER_RTL2832_TUA9001,
	97	TUNER_RTL2832_MXL5007T,
	98	TUNER_RTL2832_FC0012,
	99	TUNER_RTL2832_E4000,
	100	TUNER_RTL2832_TDA18272,
	101	TUNER_RTL2832_FC0013,
831e0b71 AP	102	};
	103
	104	struct rtl28xxu_req {
	105	u16 value;
	106	u16 index;
	107	u16 size;
	108	u8 *data;
	109	};
	110
	111	struct rtl28xxu_reg_val {
	112	u16 reg;
	113	u8 val;
	114	};
	115
	116	/*
	117	* memory map
	118	*
	119	* 0x0000 DEMOD : demodulator
	120	* 0x2000 USB : SIE, USB endpoint, debug, DMA
	121	* 0x3000 SYS : system
	122	* 0xfc00 RC : remote controller (not RTL2831U)
	123	*/
	124
	125	/*
	126	* USB registers
	127	*/
	128	/* SIE Control Registers */
	129	#define USB_SYSCTL 0x2000 /* USB system control */
	130	#define USB_SYSCTL_0 0x2000 /* USB system control */
	131	#define USB_SYSCTL_1 0x2001 /* USB system control */
	132	#define USB_SYSCTL_2 0x2002 /* USB system control */
	133	#define USB_SYSCTL_3 0x2003 /* USB system control */
	134	#define USB_IRQSTAT 0x2008 /* SIE interrupt status */
	135	#define USB_IRQEN 0x200C /* SIE interrupt enable */
	136	#define USB_CTRL 0x2010 /* USB control */
	137	#define USB_STAT 0x2014 /* USB status */
	138	#define USB_DEVADDR 0x2018 /* USB device address */
	139	#define USB_TEST 0x201C /* USB test mode */
	140	#define USB_FRAME_NUMBER 0x2020 /* frame number */
	141	#define USB_FIFO_ADDR 0x2028 /* address of SIE FIFO RAM */
	142	#define USB_FIFO_CMD 0x202A /* SIE FIFO RAM access command */
	143	#define USB_FIFO_DATA 0x2030 /* SIE FIFO RAM data */
	144	/* Endpoint Registers */
	145	#define EP0_SETUPA 0x20F8 /* EP 0 setup packet lower byte */
	146	#define EP0_SETUPB 0x20FC /* EP 0 setup packet higher byte */
	147	#define USB_EP0_CFG 0x2104 /* EP 0 configure */
	148	#define USB_EP0_CTL 0x2108 /* EP 0 control */
	149	#define USB_EP0_STAT 0x210C /* EP 0 status */
	150	#define USB_EP0_IRQSTAT 0x2110 /* EP 0 interrupt status */
	151	#define USB_EP0_IRQEN 0x2114 /* EP 0 interrupt enable */
	152	#define USB_EP0_MAXPKT 0x2118 /* EP 0 max packet size */
	153	#define USB_EP0_BC 0x2120 /* EP 0 FIFO byte counter */
	154	#define USB_EPA_CFG 0x2144 /* EP A configure */
	155	#define USB_EPA_CFG_0 0x2144 /* EP A configure */
	156	#define USB_EPA_CFG_1 0x2145 /* EP A configure */
	157	#define USB_EPA_CFG_2 0x2146 /* EP A configure */
	158	#define USB_EPA_CFG_3 0x2147 /* EP A configure */
	159	#define USB_EPA_CTL 0x2148 /* EP A control */
	160	#define USB_EPA_CTL_0 0x2148 /* EP A control */
	161	#define USB_EPA_CTL_1 0x2149 /* EP A control */
	162	#define USB_EPA_CTL_2 0x214A /* EP A control */
	163	#define USB_EPA_CTL_3 0x214B /* EP A control */
	164	#define USB_EPA_STAT 0x214C /* EP A status */
	165	#define USB_EPA_IRQSTAT 0x2150 /* EP A interrupt status */
166	#define USB_EPA_IRQEN 0x2154 /* EP A interrupt enable */
167	#define USB_EPA_MAXPKT 0x2158 /* EP A max packet size */
168	#define USB_EPA_MAXPKT_0 0x2158 /* EP A max packet size */
169	#define USB_EPA_MAXPKT_1 0x2159 /* EP A max packet size */
170	#define USB_EPA_MAXPKT_2 0x215A /* EP A max packet size */
171	#define USB_EPA_MAXPKT_3 0x215B /* EP A max packet size */
172	#define USB_EPA_FIFO_CFG 0x2160 /* EP A FIFO configure */
173	#define USB_EPA_FIFO_CFG_0 0x2160 /* EP A FIFO configure */
174	#define USB_EPA_FIFO_CFG_1 0x2161 /* EP A FIFO configure */
175	#define USB_EPA_FIFO_CFG_2 0x2162 /* EP A FIFO configure */
176	#define USB_EPA_FIFO_CFG_3 0x2163 /* EP A FIFO configure */
177	/* Debug Registers */
178	#define USB_PHYTSTDIS 0x2F04 /* PHY test disable */
179	#define USB_TOUT_VAL 0x2F08 /* USB time-out time */
180	#define USB_VDRCTRL 0x2F10 /* UTMI vendor signal control */
181	#define USB_VSTAIN 0x2F14 /* UTMI vendor signal status in */
182	#define USB_VLOADM 0x2F18 /* UTMI load vendor signal status in */
183	#define USB_VSTAOUT 0x2F1C /* UTMI vendor signal status out */
184	#define USB_UTMI_TST 0x2F80 /* UTMI test */
185	#define USB_UTMI_STATUS 0x2F84 /* UTMI status */
186	#define USB_TSTCTL 0x2F88 /* test control */
187	#define USB_TSTCTL2 0x2F8C /* test control 2 */
188	#define USB_PID_FORCE 0x2F90 /* force PID */
189	#define USB_PKTERR_CNT 0x2F94 /* packet error counter */
190	#define USB_RXERR_CNT 0x2F98 /* RX error counter */
191	#define USB_MEM_BIST 0x2F9C /* MEM BIST test */
192	#define USB_SLBBIST 0x2FA0 /* self-loop-back BIST */
193	#define USB_CNTTEST 0x2FA4 /* counter test */
194	#define USB_PHYTST 0x2FC0 /* USB PHY test */
195	#define USB_DBGIDX 0x2FF0 /* select individual block debug signal */
196	#define USB_DBGMUX 0x2FF4 /* debug signal module mux */
197
198	/*
199	* SYS registers
200	*/
201	/* demod control registers */
202	#define SYS_SYS0 0x3000 /* include DEMOD_CTL, GPO, GPI, GPOE */
203	#define SYS_DEMOD_CTL 0x3000 /* control register for DVB-T demodulator */
204	/* GPIO registers */
205	#define SYS_GPIO_OUT_VAL 0x3001 /* output value of GPIO */
206	#define SYS_GPIO_IN_VAL 0x3002 /* input value of GPIO */
207	#define SYS_GPIO_OUT_EN 0x3003 /* output enable of GPIO */
208	#define SYS_SYS1 0x3004 /* include GPD, SYSINTE, SYSINTS, GP_CFG0 */
209	#define SYS_GPIO_DIR 0x3004 /* direction control for GPIO */
210	#define SYS_SYSINTE 0x3005 /* system interrupt enable */
211	#define SYS_SYSINTS 0x3006 /* system interrupt status */
212	#define SYS_GPIO_CFG0 0x3007 /* PAD configuration for GPIO0-GPIO3 */
213	#define SYS_SYS2 0x3008 /* include GP_CFG1 and 3 reserved bytes */
214	#define SYS_GPIO_CFG1 0x3008 /* PAD configuration for GPIO4 */
b5cbaa43 AP	215	#define SYS_DEMOD_CTL1 0x300B
b5cbaa43 AP	216
831e0b71 AP	217	/* IrDA registers */
	218	#define SYS_IRRC_PSR 0x3020 /* IR protocol selection */
	219	#define SYS_IRRC_PER 0x3024 /* IR protocol extension */
	220	#define SYS_IRRC_SF 0x3028 /* IR sampling frequency */
	221	#define SYS_IRRC_DPIR 0x302C /* IR data package interval */
	222	#define SYS_IRRC_CR 0x3030 /* IR control */
	223	#define SYS_IRRC_RP 0x3034 /* IR read port */
	224	#define SYS_IRRC_SR 0x3038 /* IR status */
	225	/* I2C master registers */
	226	#define SYS_I2CCR 0x3040 /* I2C clock */
	227	#define SYS_I2CMCR 0x3044 /* I2C master control */
	228	#define SYS_I2CMSTR 0x3048 /* I2C master SCL timing */
	229	#define SYS_I2CMSR 0x304C /* I2C master status */
	230	#define SYS_I2CMFR 0x3050 /* I2C master FIFO */
	231
b5cbaa43 AP	232	/*
	233	* IR registers
	234	*/
	235	#define IR_RX_BUF 0xFC00
	236	#define IR_RX_IE 0xFD00
	237	#define IR_RX_IF 0xFD01
	238	#define IR_RX_CTRL 0xFD02
	239	#define IR_RX_CFG 0xFD03
	240	#define IR_MAX_DURATION0 0xFD04
	241	#define IR_MAX_DURATION1 0xFD05
	242	#define IR_IDLE_LEN0 0xFD06
	243	#define IR_IDLE_LEN1 0xFD07
	244	#define IR_GLITCH_LEN 0xFD08
	245	#define IR_RX_BUF_CTRL 0xFD09
	246	#define IR_RX_BUF_DATA 0xFD0A
	247	#define IR_RX_BC 0xFD0B
	248	#define IR_RX_CLK 0xFD0C
	249	#define IR_RX_C_COUNT_L 0xFD0D
	250	#define IR_RX_C_COUNT_H 0xFD0E
	251	#define IR_SUSPEND_CTRL 0xFD10
	252	#define IR_ERR_TOL_CTRL 0xFD11
	253	#define IR_UNIT_LEN 0xFD12
	254	#define IR_ERR_TOL_LEN 0xFD13
	255	#define IR_MAX_H_TOL_LEN 0xFD14
	256	#define IR_MAX_L_TOL_LEN 0xFD15
	257	#define IR_MASK_CTRL 0xFD16
	258	#define IR_MASK_DATA 0xFD17
	259	#define IR_RES_MASK_ADDR 0xFD18
	260	#define IR_RES_MASK_T_LEN 0xFD19
	261
831e0b71	262	#endif