[deliverable/linux.git] / drivers / media / dvb / mantis / mantis_uart.c

/*
	Mantis PCI bridge driver

	Copyright (C) Manu Abraham (abraham.manu@gmail.com)

	This program is free software; you can redistribute it and/or modify
	it under the terms of the GNU General Public License as published by
	the Free Software Foundation; either version 2 of the License, or
	(at your option) any later version.

	This program is distributed in the hope that it will be useful,
	but WITHOUT ANY WARRANTY; without even the implied warranty of
	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
	GNU General Public License for more details.

	You should have received a copy of the GNU General Public License
	along with this program; if not, write to the Free Software
	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/

#include <linux/kernel.h>
#include <linux/spinlock.h>
#include <asm/io.h>

#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/interrupt.h>

#include "dmxdev.h"
#include "dvbdev.h"
#include "dvb_demux.h"
#include "dvb_frontend.h"
#include "dvb_net.h"

#include "mantis_common.h"
#include "mantis_reg.h"
#include "mantis_uart.h"

struct mantis_uart_params {
	enum mantis_baud	baud_rate;
	enum mantis_parity	parity;
};

static struct {
	char string[7];
} rates[5] = {
	{ "9600" },
	{ "19200" },
	{ "38400" },
	{ "57600" },
	{ "115200" }
};

static struct {
	char string[5];
} parity[3] = {
	{ "NONE" },
	{ "ODD" },
	{ "EVEN" }
};

#define UART_MAX_BUF			16

int mantis_uart_read(struct mantis_pci *mantis, u8 *data)
{
	struct mantis_hwconfig *config = mantis->hwconfig;
	u32 stat = 0, i;

	/* get data */
	for (i = 0; i < (config->bytes + 1); i++) {

		stat = mmread(MANTIS_UART_STAT);

		if (stat & MANTIS_UART_RXFIFO_FULL) {
			dprintk(MANTIS_ERROR, 1, "RX Fifo FULL");
		}
		data[i] = mmread(MANTIS_UART_RXD) & 0x3f;

		dprintk(MANTIS_DEBUG, 1, "Reading ... <%02x>", data[i] & 0x3f);

		if (data[i] & (1 << 7)) {
			dprintk(MANTIS_ERROR, 1, "UART framing error");
			return -EINVAL;
		}
		if (data[i] & (1 << 6)) {
			dprintk(MANTIS_ERROR, 1, "UART parity error");
			return -EINVAL;
		}
	}

	return 0;
}

static void mantis_uart_work(struct work_struct *work)
{
	struct mantis_pci *mantis = container_of(work, struct mantis_pci, uart_work);
	struct mantis_hwconfig *config = mantis->hwconfig;
	u8 buf[16];
	int i;

	mantis_uart_read(mantis, buf);

	for (i = 0; i < (config->bytes + 1); i++)
		dprintk(MANTIS_INFO, 1, "UART BUF:%d <%02x> ", i, buf[i]);

	dprintk(MANTIS_DEBUG, 0, "\n");
}

static int mantis_uart_setup(struct mantis_pci *mantis,
			     struct mantis_uart_params *params)
{
	u32 reg;

	mmwrite((mmread(MANTIS_UART_CTL) | (params->parity & 0x3)), MANTIS_UART_CTL);

	reg = mmread(MANTIS_UART_BAUD);

	switch (params->baud_rate) {
	case MANTIS_BAUD_9600:
		reg |= 0xd8;
		break;
	case MANTIS_BAUD_19200:
		reg |= 0x6c;
		break;
	case MANTIS_BAUD_38400:
		reg |= 0x36;
		break;
	case MANTIS_BAUD_57600:
		reg |= 0x23;
		break;
	case MANTIS_BAUD_115200:
		reg |= 0x11;
		break;
	default:
		return -EINVAL;
	}

	mmwrite(reg, MANTIS_UART_BAUD);

	return 0;
}

int mantis_uart_init(struct mantis_pci *mantis)
{
	struct mantis_hwconfig *config = mantis->hwconfig;
	struct mantis_uart_params params;

	/* default parity: */
	params.baud_rate = config->baud_rate;
	params.parity = config->parity;
	dprintk(MANTIS_INFO, 1, "Initializing UART @ %sbps parity:%s",
		rates[params.baud_rate].string,
		parity[params.parity].string);

	init_waitqueue_head(&mantis->uart_wq);
	spin_lock_init(&mantis->uart_lock);

	INIT_WORK(&mantis->uart_work, mantis_uart_work);

	/* disable interrupt */
	mmwrite(mmread(MANTIS_UART_CTL) & 0xffef, MANTIS_UART_CTL);

	mantis_uart_setup(mantis, &params);

	/* default 1 byte */
	mmwrite((mmread(MANTIS_UART_BAUD) | (config->bytes << 8)), MANTIS_UART_BAUD);

	/* flush buffer */
	mmwrite((mmread(MANTIS_UART_CTL) | MANTIS_UART_RXFLUSH), MANTIS_UART_CTL);

	/* enable interrupt */
	mmwrite(mmread(MANTIS_INT_MASK) | 0x800, MANTIS_INT_MASK);
	mmwrite(mmread(MANTIS_UART_CTL) | MANTIS_UART_RXINT, MANTIS_UART_CTL);

	schedule_work(&mantis->uart_work);
	dprintk(MANTIS_DEBUG, 1, "UART successfully initialized");

	return 0;
}
EXPORT_SYMBOL_GPL(mantis_uart_init);

void mantis_uart_exit(struct mantis_pci *mantis)
{
	/* disable interrupt */
	mmwrite(mmread(MANTIS_UART_CTL) & 0xffef, MANTIS_UART_CTL);
	flush_work(&mantis->uart_work);
}
EXPORT_SYMBOL_GPL(mantis_uart_exit);
Commit	Line	Data
a1497357 MA	1	/*
	2	Mantis PCI bridge driver
	3
	4	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
	5
	6	This program is free software; you can redistribute it and/or modify
	7	it under the terms of the GNU General Public License as published by
	8	the Free Software Foundation; either version 2 of the License, or
	9	(at your option) any later version.
	10
	11	This program is distributed in the hope that it will be useful,
	12	but WITHOUT ANY WARRANTY; without even the implied warranty of
	13	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	14	GNU General Public License for more details.
	15
	16	You should have received a copy of the GNU General Public License
	17	along with this program; if not, write to the Free Software
	18	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
	19	*/
	20
b3b96144	21	#include <linux/kernel.h>
add20636	22	#include <linux/spinlock.h>
b7f080cf	23	#include <asm/io.h>
b3b96144	24
b3b96144 MA	25	#include <linux/signal.h>
	26	#include <linux/sched.h>
	27	#include <linux/interrupt.h>
	28
	29	#include "dmxdev.h"
	30	#include "dvbdev.h"
	31	#include "dvb_demux.h"
	32	#include "dvb_frontend.h"
	33	#include "dvb_net.h"
	34
add20636	35	#include "mantis_common.h"
b3b96144 MA	36	#include "mantis_reg.h"
b3b96144 MA	37	#include "mantis_uart.h"
add20636 MA	38
	39	struct mantis_uart_params {
	40	enum mantis_baud baud_rate;
	41	enum mantis_parity parity;
	42	};
	43
a1497357 MA	44	static struct {
	45	char string[7];
	46	} rates[5] = {
	47	{ "9600" },
	48	{ "19200" },
	49	{ "38400" },
	50	{ "57600" },
	51	{ "115200" }
	52	};
	53
	54	static struct {
	55	char string[5];
	56	} parity[3] = {
	57	{ "NONE" },
	58	{ "ODD" },
	59	{ "EVEN" }
	60	};
	61
add20636 MA	62	#define UART_MAX_BUF 16
	63
	64	int mantis_uart_read(struct mantis_pci mantis, u8 data)
	65	{
	66	struct mantis_hwconfig *config = mantis->hwconfig;
0bdc799b	67	u32 stat = 0, i;
add20636 MA	68
	69	/* get data */
	70	for (i = 0; i < (config->bytes + 1); i++) {
	71
0bdc799b MA	72	stat = mmread(MANTIS_UART_STAT);
0bdc799b MA	73
add20636	74	if (stat & MANTIS_UART_RXFIFO_FULL) {
b3b96144	75	dprintk(MANTIS_ERROR, 1, "RX Fifo FULL");
add20636 MA	76	}
	77	data[i] = mmread(MANTIS_UART_RXD) & 0x3f;
	78
b3b96144	79	dprintk(MANTIS_DEBUG, 1, "Reading ... <%02x>", data[i] & 0x3f);
add20636 MA	80
add20636 MA	81	if (data[i] & (1 << 7)) {
b3b96144	82	dprintk(MANTIS_ERROR, 1, "UART framing error");
add20636 MA	83	return -EINVAL;
	84	}
	85	if (data[i] & (1 << 6)) {
b3b96144	86	dprintk(MANTIS_ERROR, 1, "UART parity error");
add20636 MA	87	return -EINVAL;
	88	}
	89	}
	90
	91	return 0;
	92	}
	93
	94	static void mantis_uart_work(struct work_struct *work)
	95	{
	96	struct mantis_pci *mantis = container_of(work, struct mantis_pci, uart_work);
	97	struct mantis_hwconfig *config = mantis->hwconfig;
	98	u8 buf[16];
	99	int i;
	100
add20636 MA	101	mantis_uart_read(mantis, buf);
add20636 MA	102
add20636	103	for (i = 0; i < (config->bytes + 1); i++)
a1497357	104	dprintk(MANTIS_INFO, 1, "UART BUF:%d <%02x> ", i, buf[i]);
add20636	105
b3b96144	106	dprintk(MANTIS_DEBUG, 0, "\n");
add20636 MA	107	}
	108
	109	static int mantis_uart_setup(struct mantis_pci *mantis,
	110	struct mantis_uart_params *params)
	111	{
add20636 MA	112	u32 reg;
add20636 MA	113
add20636 MA	114	mmwrite((mmread(MANTIS_UART_CTL) \| (params->parity & 0x3)), MANTIS_UART_CTL);
	115
	116	reg = mmread(MANTIS_UART_BAUD);
	117
	118	switch (params->baud_rate) {
	119	case MANTIS_BAUD_9600:
	120	reg \|= 0xd8;
	121	break;
	122	case MANTIS_BAUD_19200:
	123	reg \|= 0x6c;
	124	break;
	125	case MANTIS_BAUD_38400:
	126	reg \|= 0x36;
	127	break;
	128	case MANTIS_BAUD_57600:
	129	reg \|= 0x23;
	130	break;
	131	case MANTIS_BAUD_115200:
	132	reg \|= 0x11;
	133	break;
	134	default:
	135	return -EINVAL;
	136	}
	137
	138	mmwrite(reg, MANTIS_UART_BAUD);
	139
	140	return 0;
	141	}
	142
	143	int mantis_uart_init(struct mantis_pci *mantis)
	144	{
	145	struct mantis_hwconfig *config = mantis->hwconfig;
	146	struct mantis_uart_params params;
	147
add20636 MA	148	/* default parity: */
	149	params.baud_rate = config->baud_rate;
	150	params.parity = config->parity;
a1497357 MA	151	dprintk(MANTIS_INFO, 1, "Initializing UART @ %sbps parity:%s",
	152	rates[params.baud_rate].string,
	153	parity[params.parity].string);
add20636 MA	154
	155	init_waitqueue_head(&mantis->uart_wq);
	156	spin_lock_init(&mantis->uart_lock);
	157
	158	INIT_WORK(&mantis->uart_work, mantis_uart_work);
	159
	160	/* disable interrupt */
	161	mmwrite(mmread(MANTIS_UART_CTL) & 0xffef, MANTIS_UART_CTL);
	162
	163	mantis_uart_setup(mantis, &params);
	164
	165	/* default 1 byte */
	166	mmwrite((mmread(MANTIS_UART_BAUD) \| (config->bytes << 8)), MANTIS_UART_BAUD);
	167
	168	/* flush buffer */
	169	mmwrite((mmread(MANTIS_UART_CTL) \| MANTIS_UART_RXFLUSH), MANTIS_UART_CTL);
	170
	171	/* enable interrupt */
	172	mmwrite(mmread(MANTIS_INT_MASK) \| 0x800, MANTIS_INT_MASK);
	173	mmwrite(mmread(MANTIS_UART_CTL) \| MANTIS_UART_RXINT, MANTIS_UART_CTL);
	174
	175	schedule_work(&mantis->uart_work);
25985edc	176	dprintk(MANTIS_DEBUG, 1, "UART successfully initialized");
add20636 MA	177
	178	return 0;
	179	}
b3b96144	180	EXPORT_SYMBOL_GPL(mantis_uart_init);
add20636 MA	181
	182	void mantis_uart_exit(struct mantis_pci *mantis)
	183	{
	184	/* disable interrupt */
	185	mmwrite(mmread(MANTIS_UART_CTL) & 0xffef, MANTIS_UART_CTL);
43829731	186	flush_work(&mantis->uart_work);
add20636	187	}
b3b96144	188	EXPORT_SYMBOL_GPL(mantis_uart_exit);