Commit | Line | Data |
---|---|---|
cb7a01ac MCC |
1 | # |
2 | # Multimedia Video device configuration | |
3 | # | |
4 | ||
5 | if VIDEO_V4L2 | |
6 | ||
cb7a01ac | 7 | config VIDEO_IR_I2C |
fccea74f | 8 | tristate "I2C module for IR" if !MEDIA_SUBDRV_AUTOSELECT |
cb7a01ac MCC |
9 | depends on I2C && RC_CORE |
10 | default y | |
11 | ---help--- | |
12 | Most boards have an IR chip directly connected via GPIO. However, | |
13 | some video boards have the IR connected via I2C bus. | |
14 | ||
15 | If your board doesn't have an I2C IR chip, you may disable this | |
16 | option. | |
17 | ||
18 | In doubt, say Y. | |
19 | ||
20 | # | |
21 | # Encoder / Decoder module configuration | |
22 | # | |
23 | ||
24 | menu "Encoders, decoders, sensors and other helper chips" | |
fccea74f | 25 | visible if !MEDIA_SUBDRV_AUTOSELECT |
cb7a01ac MCC |
26 | |
27 | comment "Audio decoders, processors and mixers" | |
28 | ||
29 | config VIDEO_TVAUDIO | |
30 | tristate "Simple audio decoder chips" | |
31 | depends on VIDEO_V4L2 && I2C | |
32 | ---help--- | |
33 | Support for several audio decoder chips found on some bt8xx boards: | |
34 | Philips: tda9840, tda9873h, tda9874h/a, tda9850, tda985x, tea6300, | |
35 | tea6320, tea6420, tda8425, ta8874z. | |
36 | Microchip: pic16c54 based design on ProVideo PV951 board. | |
37 | ||
38 | To compile this driver as a module, choose M here: the | |
39 | module will be called tvaudio. | |
40 | ||
41 | config VIDEO_TDA7432 | |
42 | tristate "Philips TDA7432 audio processor" | |
43 | depends on VIDEO_V4L2 && I2C | |
44 | ---help--- | |
45 | Support for tda7432 audio decoder chip found on some bt8xx boards. | |
46 | ||
47 | To compile this driver as a module, choose M here: the | |
48 | module will be called tda7432. | |
49 | ||
50 | config VIDEO_TDA9840 | |
51 | tristate "Philips TDA9840 audio processor" | |
52 | depends on I2C | |
53 | ---help--- | |
54 | Support for tda9840 audio decoder chip found on some Zoran boards. | |
55 | ||
56 | To compile this driver as a module, choose M here: the | |
57 | module will be called tda9840. | |
58 | ||
59 | config VIDEO_TEA6415C | |
60 | tristate "Philips TEA6415C audio processor" | |
61 | depends on I2C | |
62 | ---help--- | |
63 | Support for tea6415c audio decoder chip found on some bt8xx boards. | |
64 | ||
65 | To compile this driver as a module, choose M here: the | |
66 | module will be called tea6415c. | |
67 | ||
68 | config VIDEO_TEA6420 | |
69 | tristate "Philips TEA6420 audio processor" | |
70 | depends on I2C | |
71 | ---help--- | |
72 | Support for tea6420 audio decoder chip found on some bt8xx boards. | |
73 | ||
74 | To compile this driver as a module, choose M here: the | |
75 | module will be called tea6420. | |
76 | ||
77 | config VIDEO_MSP3400 | |
78 | tristate "Micronas MSP34xx audio decoders" | |
79 | depends on VIDEO_V4L2 && I2C | |
80 | ---help--- | |
81 | Support for the Micronas MSP34xx series of audio decoders. | |
82 | ||
83 | To compile this driver as a module, choose M here: the | |
84 | module will be called msp3400. | |
85 | ||
86 | config VIDEO_CS5345 | |
87 | tristate "Cirrus Logic CS5345 audio ADC" | |
88 | depends on VIDEO_V4L2 && I2C | |
89 | ---help--- | |
90 | Support for the Cirrus Logic CS5345 24-bit, 192 kHz | |
91 | stereo A/D converter. | |
92 | ||
93 | To compile this driver as a module, choose M here: the | |
94 | module will be called cs5345. | |
95 | ||
96 | config VIDEO_CS53L32A | |
97 | tristate "Cirrus Logic CS53L32A audio ADC" | |
98 | depends on VIDEO_V4L2 && I2C | |
99 | ---help--- | |
100 | Support for the Cirrus Logic CS53L32A low voltage | |
101 | stereo A/D converter. | |
102 | ||
103 | To compile this driver as a module, choose M here: the | |
104 | module will be called cs53l32a. | |
105 | ||
106 | config VIDEO_TLV320AIC23B | |
107 | tristate "Texas Instruments TLV320AIC23B audio codec" | |
2cca7d4e | 108 | depends on VIDEO_V4L2 && I2C |
cb7a01ac MCC |
109 | ---help--- |
110 | Support for the Texas Instruments TLV320AIC23B audio codec. | |
111 | ||
112 | To compile this driver as a module, choose M here: the | |
113 | module will be called tlv320aic23b. | |
114 | ||
73d9f979 HV |
115 | config VIDEO_UDA1342 |
116 | tristate "Philips UDA1342 audio codec" | |
117 | depends on VIDEO_V4L2 && I2C | |
118 | ---help--- | |
119 | Support for the Philips UDA1342 audio codec. | |
120 | ||
121 | To compile this driver as a module, choose M here: the | |
122 | module will be called uda1342. | |
123 | ||
cb7a01ac MCC |
124 | config VIDEO_WM8775 |
125 | tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer" | |
126 | depends on VIDEO_V4L2 && I2C | |
127 | ---help--- | |
128 | Support for the Wolfson Microelectronics WM8775 high | |
129 | performance stereo A/D Converter with a 4 channel input mixer. | |
130 | ||
131 | To compile this driver as a module, choose M here: the | |
132 | module will be called wm8775. | |
133 | ||
134 | config VIDEO_WM8739 | |
135 | tristate "Wolfson Microelectronics WM8739 stereo audio ADC" | |
136 | depends on VIDEO_V4L2 && I2C | |
137 | ---help--- | |
138 | Support for the Wolfson Microelectronics WM8739 | |
139 | stereo A/D Converter. | |
140 | ||
141 | To compile this driver as a module, choose M here: the | |
142 | module will be called wm8739. | |
143 | ||
144 | config VIDEO_VP27SMPX | |
c7c54a98 | 145 | tristate "Panasonic VP27's internal MPX" |
cb7a01ac MCC |
146 | depends on VIDEO_V4L2 && I2C |
147 | ---help--- | |
148 | Support for the internal MPX of the Panasonic VP27s tuner. | |
149 | ||
150 | To compile this driver as a module, choose M here: the | |
151 | module will be called vp27smpx. | |
152 | ||
c7c54a98 HV |
153 | config VIDEO_SONY_BTF_MPX |
154 | tristate "Sony BTF's internal MPX" | |
155 | depends on VIDEO_V4L2 && I2C | |
156 | help | |
157 | Support for the internal MPX of the Sony BTF-PG472Z tuner. | |
158 | ||
159 | To compile this driver as a module, choose M here: the | |
160 | module will be called sony-btf-mpx. | |
161 | ||
cb7a01ac MCC |
162 | comment "RDS decoders" |
163 | ||
164 | config VIDEO_SAA6588 | |
165 | tristate "SAA6588 Radio Chip RDS decoder support" | |
166 | depends on VIDEO_V4L2 && I2C | |
167 | ||
168 | help | |
169 | Support for this Radio Data System (RDS) decoder. This allows | |
170 | seeing radio station identification transmitted using this | |
171 | standard. | |
172 | ||
173 | To compile this driver as a module, choose M here: the | |
174 | module will be called saa6588. | |
175 | ||
176 | comment "Video decoders" | |
177 | ||
178 | config VIDEO_ADV7180 | |
179 | tristate "Analog Devices ADV7180 decoder" | |
180 | depends on VIDEO_V4L2 && I2C | |
181 | ---help--- | |
182 | Support for the Analog Devices ADV7180 video decoder. | |
183 | ||
184 | To compile this driver as a module, choose M here: the | |
185 | module will be called adv7180. | |
186 | ||
187 | config VIDEO_ADV7183 | |
188 | tristate "Analog Devices ADV7183 decoder" | |
189 | depends on VIDEO_V4L2 && I2C | |
190 | ---help--- | |
191 | V4l2 subdevice driver for the Analog Devices | |
192 | ADV7183 video decoder. | |
193 | ||
194 | To compile this driver as a module, choose M here: the | |
195 | module will be called adv7183. | |
196 | ||
54450f59 HV |
197 | config VIDEO_ADV7604 |
198 | tristate "Analog Devices ADV7604 decoder" | |
199 | depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API | |
200 | ---help--- | |
201 | Support for the Analog Devices ADV7604 video decoder. | |
202 | ||
203 | This is a Analog Devices Component/Graphics Digitizer | |
204 | with 4:1 Multiplexed HDMI Receiver. | |
205 | ||
206 | To compile this driver as a module, choose M here: the | |
207 | module will be called adv7604. | |
208 | ||
cb7a01ac MCC |
209 | config VIDEO_BT819 |
210 | tristate "BT819A VideoStream decoder" | |
211 | depends on VIDEO_V4L2 && I2C | |
212 | ---help--- | |
213 | Support for BT819A video decoder. | |
214 | ||
215 | To compile this driver as a module, choose M here: the | |
216 | module will be called bt819. | |
217 | ||
218 | config VIDEO_BT856 | |
219 | tristate "BT856 VideoStream decoder" | |
220 | depends on VIDEO_V4L2 && I2C | |
221 | ---help--- | |
222 | Support for BT856 video decoder. | |
223 | ||
224 | To compile this driver as a module, choose M here: the | |
225 | module will be called bt856. | |
226 | ||
227 | config VIDEO_BT866 | |
228 | tristate "BT866 VideoStream decoder" | |
229 | depends on VIDEO_V4L2 && I2C | |
230 | ---help--- | |
231 | Support for BT866 video decoder. | |
232 | ||
233 | To compile this driver as a module, choose M here: the | |
234 | module will be called bt866. | |
235 | ||
236 | config VIDEO_KS0127 | |
237 | tristate "KS0127 video decoder" | |
238 | depends on VIDEO_V4L2 && I2C | |
239 | ---help--- | |
240 | Support for KS0127 video decoder. | |
241 | ||
242 | This chip is used on AverMedia AVS6EYES Zoran-based MJPEG | |
243 | cards. | |
244 | ||
245 | To compile this driver as a module, choose M here: the | |
246 | module will be called ks0127. | |
247 | ||
248 | config VIDEO_SAA7110 | |
249 | tristate "Philips SAA7110 video decoder" | |
250 | depends on VIDEO_V4L2 && I2C | |
251 | ---help--- | |
252 | Support for the Philips SAA7110 video decoders. | |
253 | ||
254 | To compile this driver as a module, choose M here: the | |
255 | module will be called saa7110. | |
256 | ||
257 | config VIDEO_SAA711X | |
258 | tristate "Philips SAA7111/3/4/5 video decoders" | |
259 | depends on VIDEO_V4L2 && I2C | |
260 | ---help--- | |
261 | Support for the Philips SAA7111/3/4/5 video decoders. | |
262 | ||
263 | To compile this driver as a module, choose M here: the | |
264 | module will be called saa7115. | |
265 | ||
266 | config VIDEO_SAA7191 | |
267 | tristate "Philips SAA7191 video decoder" | |
268 | depends on VIDEO_V4L2 && I2C | |
269 | ---help--- | |
270 | Support for the Philips SAA7191 video decoder. | |
271 | ||
272 | To compile this driver as a module, choose M here: the | |
273 | module will be called saa7191. | |
274 | ||
275 | config VIDEO_TVP514X | |
276 | tristate "Texas Instruments TVP514x video decoder" | |
277 | depends on VIDEO_V4L2 && I2C | |
278 | ---help--- | |
279 | This is a Video4Linux2 sensor-level driver for the TI TVP5146/47 | |
280 | decoder. It is currently working with the TI OMAP3 camera | |
281 | controller. | |
282 | ||
283 | To compile this driver as a module, choose M here: the | |
284 | module will be called tvp514x. | |
285 | ||
286 | config VIDEO_TVP5150 | |
287 | tristate "Texas Instruments TVP5150 video decoder" | |
288 | depends on VIDEO_V4L2 && I2C | |
289 | ---help--- | |
290 | Support for the Texas Instruments TVP5150 video decoder. | |
291 | ||
292 | To compile this driver as a module, choose M here: the | |
293 | module will be called tvp5150. | |
294 | ||
295 | config VIDEO_TVP7002 | |
296 | tristate "Texas Instruments TVP7002 video decoder" | |
297 | depends on VIDEO_V4L2 && I2C | |
298 | ---help--- | |
299 | Support for the Texas Instruments TVP7002 video decoder. | |
300 | ||
301 | To compile this driver as a module, choose M here: the | |
302 | module will be called tvp7002. | |
303 | ||
12be52a9 HV |
304 | config VIDEO_TW2804 |
305 | tristate "Techwell TW2804 multiple video decoder" | |
306 | depends on VIDEO_V4L2 && I2C | |
307 | ---help--- | |
308 | Support for the Techwell tw2804 multiple video decoder. | |
309 | ||
310 | To compile this driver as a module, choose M here: the | |
311 | module will be called tw2804. | |
312 | ||
0890ec19 HV |
313 | config VIDEO_TW9903 |
314 | tristate "Techwell TW9903 video decoder" | |
315 | depends on VIDEO_V4L2 && I2C | |
316 | ---help--- | |
12be52a9 | 317 | Support for the Techwell tw9903 multi-standard video decoder |
0890ec19 HV |
318 | with high quality down scaler. |
319 | ||
320 | To compile this driver as a module, choose M here: the | |
321 | module will be called tw9903. | |
322 | ||
a000e9a0 HV |
323 | config VIDEO_TW9906 |
324 | tristate "Techwell TW9906 video decoder" | |
325 | depends on VIDEO_V4L2 && I2C | |
326 | ---help--- | |
327 | Support for the Techwell tw9906 enhanced multi-standard comb filter | |
328 | video decoder with YCbCr input support. | |
329 | ||
330 | To compile this driver as a module, choose M here: the | |
331 | module will be called tw9906. | |
332 | ||
cb7a01ac MCC |
333 | config VIDEO_VPX3220 |
334 | tristate "vpx3220a, vpx3216b & vpx3214c video decoders" | |
335 | depends on VIDEO_V4L2 && I2C | |
336 | ---help--- | |
337 | Support for VPX322x video decoders. | |
338 | ||
339 | To compile this driver as a module, choose M here: the | |
340 | module will be called vpx3220. | |
341 | ||
342 | comment "Video and audio decoders" | |
343 | ||
344 | config VIDEO_SAA717X | |
345 | tristate "Philips SAA7171/3/4 audio/video decoders" | |
346 | depends on VIDEO_V4L2 && I2C | |
347 | ---help--- | |
348 | Support for the Philips SAA7171/3/4 audio/video decoders. | |
349 | ||
350 | To compile this driver as a module, choose M here: the | |
351 | module will be called saa717x. | |
352 | ||
353 | source "drivers/media/i2c/cx25840/Kconfig" | |
354 | ||
cb7a01ac MCC |
355 | comment "Video encoders" |
356 | ||
357 | config VIDEO_SAA7127 | |
358 | tristate "Philips SAA7127/9 digital video encoders" | |
359 | depends on VIDEO_V4L2 && I2C | |
360 | ---help--- | |
361 | Support for the Philips SAA7127/9 digital video encoders. | |
362 | ||
363 | To compile this driver as a module, choose M here: the | |
364 | module will be called saa7127. | |
365 | ||
366 | config VIDEO_SAA7185 | |
367 | tristate "Philips SAA7185 video encoder" | |
368 | depends on VIDEO_V4L2 && I2C | |
369 | ---help--- | |
370 | Support for the Philips SAA7185 video encoder. | |
371 | ||
372 | To compile this driver as a module, choose M here: the | |
373 | module will be called saa7185. | |
374 | ||
375 | config VIDEO_ADV7170 | |
376 | tristate "Analog Devices ADV7170 video encoder" | |
377 | depends on VIDEO_V4L2 && I2C | |
378 | ---help--- | |
379 | Support for the Analog Devices ADV7170 video encoder driver | |
380 | ||
381 | To compile this driver as a module, choose M here: the | |
382 | module will be called adv7170. | |
383 | ||
384 | config VIDEO_ADV7175 | |
385 | tristate "Analog Devices ADV7175 video encoder" | |
386 | depends on VIDEO_V4L2 && I2C | |
387 | ---help--- | |
388 | Support for the Analog Devices ADV7175 video encoder driver | |
389 | ||
390 | To compile this driver as a module, choose M here: the | |
391 | module will be called adv7175. | |
392 | ||
393 | config VIDEO_ADV7343 | |
394 | tristate "ADV7343 video encoder" | |
395 | depends on I2C | |
396 | help | |
397 | Support for Analog Devices I2C bus based ADV7343 encoder. | |
398 | ||
399 | To compile this driver as a module, choose M here: the | |
400 | module will be called adv7343. | |
401 | ||
402 | config VIDEO_ADV7393 | |
403 | tristate "ADV7393 video encoder" | |
404 | depends on I2C | |
405 | help | |
406 | Support for Analog Devices I2C bus based ADV7393 encoder. | |
407 | ||
408 | To compile this driver as a module, choose M here: the | |
409 | module will be called adv7393. | |
410 | ||
117a55b6 HV |
411 | config VIDEO_AD9389B |
412 | tristate "Analog Devices AD9389B encoder" | |
413 | depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API | |
414 | ---help--- | |
415 | Support for the Analog Devices AD9389B video encoder. | |
416 | ||
417 | This is a Analog Devices HDMI transmitter. | |
418 | ||
419 | To compile this driver as a module, choose M here: the | |
420 | module will be called ad9389b. | |
421 | ||
cb7a01ac MCC |
422 | config VIDEO_AK881X |
423 | tristate "AK8813/AK8814 video encoders" | |
424 | depends on I2C | |
425 | help | |
426 | Video output driver for AKM AK8813 and AK8814 TV encoders | |
427 | ||
428 | comment "Camera sensor devices" | |
429 | ||
430 | config VIDEO_APTINA_PLL | |
431 | tristate | |
432 | ||
433 | config VIDEO_SMIAPP_PLL | |
434 | tristate | |
435 | ||
ec367c3c HV |
436 | config VIDEO_OV7640 |
437 | tristate "OmniVision OV7640 sensor support" | |
438 | depends on I2C && VIDEO_V4L2 | |
439 | depends on MEDIA_CAMERA_SUPPORT | |
440 | ---help--- | |
441 | This is a Video4Linux2 sensor-level driver for the OmniVision | |
442 | OV7640 camera. | |
443 | ||
444 | To compile this driver as a module, choose M here: the | |
445 | module will be called ov7640. | |
446 | ||
cb7a01ac MCC |
447 | config VIDEO_OV7670 |
448 | tristate "OmniVision OV7670 sensor support" | |
449 | depends on I2C && VIDEO_V4L2 | |
450 | depends on MEDIA_CAMERA_SUPPORT | |
451 | ---help--- | |
452 | This is a Video4Linux2 sensor-level driver for the OmniVision | |
453 | OV7670 VGA camera. It currently only works with the M88ALP01 | |
454 | controller. | |
455 | ||
84a15ded SN |
456 | config VIDEO_OV9650 |
457 | tristate "OmniVision OV9650/OV9652 sensor support" | |
458 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
459 | ---help--- | |
460 | This is a V4L2 sensor-level driver for the Omnivision | |
461 | OV9650 and OV9652 camera sensors. | |
462 | ||
cb7a01ac MCC |
463 | config VIDEO_VS6624 |
464 | tristate "ST VS6624 sensor support" | |
465 | depends on VIDEO_V4L2 && I2C | |
466 | depends on MEDIA_CAMERA_SUPPORT | |
467 | ---help--- | |
468 | This is a Video4Linux2 sensor-level driver for the ST VS6624 | |
469 | camera. | |
470 | ||
471 | To compile this driver as a module, choose M here: the | |
472 | module will be called vs6624. | |
473 | ||
474 | config VIDEO_MT9M032 | |
475 | tristate "MT9M032 camera sensor support" | |
476 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
477 | depends on MEDIA_CAMERA_SUPPORT | |
478 | select VIDEO_APTINA_PLL | |
479 | ---help--- | |
480 | This driver supports MT9M032 camera sensors from Aptina, monochrome | |
481 | models only. | |
482 | ||
483 | config VIDEO_MT9P031 | |
484 | tristate "Aptina MT9P031 support" | |
485 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
486 | depends on MEDIA_CAMERA_SUPPORT | |
487 | select VIDEO_APTINA_PLL | |
488 | ---help--- | |
489 | This is a Video4Linux2 sensor-level driver for the Aptina | |
490 | (Micron) mt9p031 5 Mpixel camera. | |
491 | ||
492 | config VIDEO_MT9T001 | |
493 | tristate "Aptina MT9T001 support" | |
494 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
495 | depends on MEDIA_CAMERA_SUPPORT | |
496 | ---help--- | |
497 | This is a Video4Linux2 sensor-level driver for the Aptina | |
498 | (Micron) mt0t001 3 Mpixel camera. | |
499 | ||
500 | config VIDEO_MT9V011 | |
501 | tristate "Micron mt9v011 sensor support" | |
502 | depends on I2C && VIDEO_V4L2 | |
503 | depends on MEDIA_CAMERA_SUPPORT | |
504 | ---help--- | |
505 | This is a Video4Linux2 sensor-level driver for the Micron | |
506 | mt0v011 1.3 Mpixel camera. It currently only works with the | |
507 | em28xx driver. | |
508 | ||
509 | config VIDEO_MT9V032 | |
510 | tristate "Micron MT9V032 sensor support" | |
511 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
512 | depends on MEDIA_CAMERA_SUPPORT | |
513 | ---help--- | |
514 | This is a Video4Linux2 sensor-level driver for the Micron | |
515 | MT9V032 752x480 CMOS sensor. | |
516 | ||
517 | config VIDEO_TCM825X | |
518 | tristate "TCM825x camera sensor support" | |
668a8b3b | 519 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_INT_DEVICE |
cb7a01ac MCC |
520 | depends on MEDIA_CAMERA_SUPPORT |
521 | ---help--- | |
522 | This is a driver for the Toshiba TCM825x VGA camera sensor. | |
523 | It is used for example in Nokia N800. | |
524 | ||
525 | config VIDEO_SR030PC30 | |
526 | tristate "Siliconfile SR030PC30 sensor support" | |
527 | depends on I2C && VIDEO_V4L2 | |
528 | depends on MEDIA_CAMERA_SUPPORT | |
529 | ---help--- | |
530 | This driver supports SR030PC30 VGA camera from Siliconfile | |
531 | ||
532 | config VIDEO_NOON010PC30 | |
533 | tristate "Siliconfile NOON010PC30 sensor support" | |
2cca7d4e | 534 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API |
cb7a01ac MCC |
535 | depends on MEDIA_CAMERA_SUPPORT |
536 | ---help--- | |
537 | This driver supports NOON010PC30 CIF camera from Siliconfile | |
538 | ||
539 | source "drivers/media/i2c/m5mols/Kconfig" | |
540 | ||
541 | config VIDEO_S5K6AA | |
542 | tristate "Samsung S5K6AAFX sensor support" | |
543 | depends on MEDIA_CAMERA_SUPPORT | |
544 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
545 | ---help--- | |
546 | This is a V4L2 sensor-level driver for Samsung S5K6AA(FX) 1.3M | |
547 | camera sensor with an embedded SoC image signal processor. | |
548 | ||
8b99312b SL |
549 | config VIDEO_S5K4ECGX |
550 | tristate "Samsung S5K4ECGX sensor support" | |
551 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
552 | ---help--- | |
553 | This is a V4L2 sensor-level driver for Samsung S5K4ECGX 5M | |
554 | camera sensor with an embedded SoC image signal processor. | |
555 | ||
cb7a01ac MCC |
556 | source "drivers/media/i2c/smiapp/Kconfig" |
557 | ||
cac47f18 AH |
558 | config VIDEO_S5C73M3 |
559 | tristate "Samsung S5C73M3 sensor support" | |
560 | depends on I2C && SPI && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
561 | ---help--- | |
4494f0fd GG |
562 | This is a V4L2 sensor-level driver for Samsung S5C73M3 |
563 | 8 Mpixel camera. | |
cac47f18 | 564 | |
cb7a01ac MCC |
565 | comment "Flash devices" |
566 | ||
567 | config VIDEO_ADP1653 | |
568 | tristate "ADP1653 flash support" | |
569 | depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER | |
570 | depends on MEDIA_CAMERA_SUPPORT | |
571 | ---help--- | |
572 | This is a driver for the ADP1653 flash controller. It is used for | |
573 | example in Nokia N900. | |
574 | ||
575 | config VIDEO_AS3645A | |
576 | tristate "AS3645A flash driver support" | |
577 | depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER | |
578 | depends on MEDIA_CAMERA_SUPPORT | |
579 | ---help--- | |
580 | This is a driver for the AS3645A and LM3555 flash controllers. It has | |
581 | build in control for flash, torch and indicator LEDs. | |
582 | ||
583 | comment "Video improvement chips" | |
584 | ||
585 | config VIDEO_UPD64031A | |
586 | tristate "NEC Electronics uPD64031A Ghost Reduction" | |
587 | depends on VIDEO_V4L2 && I2C | |
588 | ---help--- | |
589 | Support for the NEC Electronics uPD64031A Ghost Reduction | |
590 | video chip. It is most often found in NTSC TV cards made for | |
591 | Japan and is used to reduce the 'ghosting' effect that can | |
592 | be present in analog TV broadcasts. | |
593 | ||
594 | To compile this driver as a module, choose M here: the | |
595 | module will be called upd64031a. | |
596 | ||
597 | config VIDEO_UPD64083 | |
598 | tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation" | |
599 | depends on VIDEO_V4L2 && I2C | |
600 | ---help--- | |
601 | Support for the NEC Electronics uPD64083 3-Dimensional Y/C | |
602 | separation video chip. It is used to improve the quality of | |
603 | the colors of a composite signal. | |
604 | ||
605 | To compile this driver as a module, choose M here: the | |
606 | module will be called upd64083. | |
607 | ||
608 | comment "Miscelaneous helper chips" | |
609 | ||
610 | config VIDEO_THS7303 | |
88da0183 LP |
611 | tristate "THS7303/53 Video Amplifier" |
612 | depends on VIDEO_V4L2 && I2C | |
cb7a01ac | 613 | help |
88da0183 | 614 | Support for TI THS7303/53 video amplifier |
cb7a01ac MCC |
615 | |
616 | To compile this driver as a module, choose M here: the | |
617 | module will be called ths7303. | |
618 | ||
619 | config VIDEO_M52790 | |
620 | tristate "Mitsubishi M52790 A/V switch" | |
621 | depends on VIDEO_V4L2 && I2C | |
622 | ---help--- | |
623 | Support for the Mitsubishi M52790 A/V switch. | |
624 | ||
625 | To compile this driver as a module, choose M here: the | |
626 | module will be called m52790. | |
fccea74f | 627 | endmenu |
e9d2f057 | 628 | |
fccea74f | 629 | menu "Sensors used on soc_camera driver" |
cb7a01ac | 630 | |
2a2d1cf4 MCC |
631 | if SOC_CAMERA |
632 | source "drivers/media/i2c/soc_camera/Kconfig" | |
633 | endif | |
634 | ||
cb7a01ac | 635 | endmenu |
fccea74f | 636 | |
cb7a01ac | 637 | endif |