Commit | Line | Data |
---|---|---|
cb7a01ac MCC |
1 | # |
2 | # Multimedia Video device configuration | |
3 | # | |
4 | ||
5 | if VIDEO_V4L2 | |
6 | ||
cb7a01ac | 7 | config VIDEO_IR_I2C |
fccea74f | 8 | tristate "I2C module for IR" if !MEDIA_SUBDRV_AUTOSELECT |
cb7a01ac MCC |
9 | depends on I2C && RC_CORE |
10 | default y | |
11 | ---help--- | |
12 | Most boards have an IR chip directly connected via GPIO. However, | |
13 | some video boards have the IR connected via I2C bus. | |
14 | ||
15 | If your board doesn't have an I2C IR chip, you may disable this | |
16 | option. | |
17 | ||
18 | In doubt, say Y. | |
19 | ||
20 | # | |
21 | # Encoder / Decoder module configuration | |
22 | # | |
23 | ||
24 | menu "Encoders, decoders, sensors and other helper chips" | |
fccea74f | 25 | visible if !MEDIA_SUBDRV_AUTOSELECT |
cb7a01ac MCC |
26 | |
27 | comment "Audio decoders, processors and mixers" | |
28 | ||
29 | config VIDEO_TVAUDIO | |
30 | tristate "Simple audio decoder chips" | |
31 | depends on VIDEO_V4L2 && I2C | |
32 | ---help--- | |
33 | Support for several audio decoder chips found on some bt8xx boards: | |
34 | Philips: tda9840, tda9873h, tda9874h/a, tda9850, tda985x, tea6300, | |
35 | tea6320, tea6420, tda8425, ta8874z. | |
36 | Microchip: pic16c54 based design on ProVideo PV951 board. | |
37 | ||
38 | To compile this driver as a module, choose M here: the | |
39 | module will be called tvaudio. | |
40 | ||
41 | config VIDEO_TDA7432 | |
42 | tristate "Philips TDA7432 audio processor" | |
43 | depends on VIDEO_V4L2 && I2C | |
44 | ---help--- | |
45 | Support for tda7432 audio decoder chip found on some bt8xx boards. | |
46 | ||
47 | To compile this driver as a module, choose M here: the | |
48 | module will be called tda7432. | |
49 | ||
50 | config VIDEO_TDA9840 | |
51 | tristate "Philips TDA9840 audio processor" | |
52 | depends on I2C | |
53 | ---help--- | |
54 | Support for tda9840 audio decoder chip found on some Zoran boards. | |
55 | ||
56 | To compile this driver as a module, choose M here: the | |
57 | module will be called tda9840. | |
58 | ||
59 | config VIDEO_TEA6415C | |
60 | tristate "Philips TEA6415C audio processor" | |
61 | depends on I2C | |
62 | ---help--- | |
63 | Support for tea6415c audio decoder chip found on some bt8xx boards. | |
64 | ||
65 | To compile this driver as a module, choose M here: the | |
66 | module will be called tea6415c. | |
67 | ||
68 | config VIDEO_TEA6420 | |
69 | tristate "Philips TEA6420 audio processor" | |
70 | depends on I2C | |
71 | ---help--- | |
72 | Support for tea6420 audio decoder chip found on some bt8xx boards. | |
73 | ||
74 | To compile this driver as a module, choose M here: the | |
75 | module will be called tea6420. | |
76 | ||
77 | config VIDEO_MSP3400 | |
78 | tristate "Micronas MSP34xx audio decoders" | |
79 | depends on VIDEO_V4L2 && I2C | |
80 | ---help--- | |
81 | Support for the Micronas MSP34xx series of audio decoders. | |
82 | ||
83 | To compile this driver as a module, choose M here: the | |
84 | module will be called msp3400. | |
85 | ||
86 | config VIDEO_CS5345 | |
87 | tristate "Cirrus Logic CS5345 audio ADC" | |
88 | depends on VIDEO_V4L2 && I2C | |
89 | ---help--- | |
90 | Support for the Cirrus Logic CS5345 24-bit, 192 kHz | |
91 | stereo A/D converter. | |
92 | ||
93 | To compile this driver as a module, choose M here: the | |
94 | module will be called cs5345. | |
95 | ||
96 | config VIDEO_CS53L32A | |
97 | tristate "Cirrus Logic CS53L32A audio ADC" | |
98 | depends on VIDEO_V4L2 && I2C | |
99 | ---help--- | |
100 | Support for the Cirrus Logic CS53L32A low voltage | |
101 | stereo A/D converter. | |
102 | ||
103 | To compile this driver as a module, choose M here: the | |
104 | module will be called cs53l32a. | |
105 | ||
106 | config VIDEO_TLV320AIC23B | |
107 | tristate "Texas Instruments TLV320AIC23B audio codec" | |
2cca7d4e | 108 | depends on VIDEO_V4L2 && I2C |
cb7a01ac MCC |
109 | ---help--- |
110 | Support for the Texas Instruments TLV320AIC23B audio codec. | |
111 | ||
112 | To compile this driver as a module, choose M here: the | |
113 | module will be called tlv320aic23b. | |
114 | ||
115 | config VIDEO_WM8775 | |
116 | tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer" | |
117 | depends on VIDEO_V4L2 && I2C | |
118 | ---help--- | |
119 | Support for the Wolfson Microelectronics WM8775 high | |
120 | performance stereo A/D Converter with a 4 channel input mixer. | |
121 | ||
122 | To compile this driver as a module, choose M here: the | |
123 | module will be called wm8775. | |
124 | ||
125 | config VIDEO_WM8739 | |
126 | tristate "Wolfson Microelectronics WM8739 stereo audio ADC" | |
127 | depends on VIDEO_V4L2 && I2C | |
128 | ---help--- | |
129 | Support for the Wolfson Microelectronics WM8739 | |
130 | stereo A/D Converter. | |
131 | ||
132 | To compile this driver as a module, choose M here: the | |
133 | module will be called wm8739. | |
134 | ||
135 | config VIDEO_VP27SMPX | |
136 | tristate "Panasonic VP27s internal MPX" | |
137 | depends on VIDEO_V4L2 && I2C | |
138 | ---help--- | |
139 | Support for the internal MPX of the Panasonic VP27s tuner. | |
140 | ||
141 | To compile this driver as a module, choose M here: the | |
142 | module will be called vp27smpx. | |
143 | ||
144 | comment "RDS decoders" | |
145 | ||
146 | config VIDEO_SAA6588 | |
147 | tristate "SAA6588 Radio Chip RDS decoder support" | |
148 | depends on VIDEO_V4L2 && I2C | |
149 | ||
150 | help | |
151 | Support for this Radio Data System (RDS) decoder. This allows | |
152 | seeing radio station identification transmitted using this | |
153 | standard. | |
154 | ||
155 | To compile this driver as a module, choose M here: the | |
156 | module will be called saa6588. | |
157 | ||
158 | comment "Video decoders" | |
159 | ||
160 | config VIDEO_ADV7180 | |
161 | tristate "Analog Devices ADV7180 decoder" | |
162 | depends on VIDEO_V4L2 && I2C | |
163 | ---help--- | |
164 | Support for the Analog Devices ADV7180 video decoder. | |
165 | ||
166 | To compile this driver as a module, choose M here: the | |
167 | module will be called adv7180. | |
168 | ||
169 | config VIDEO_ADV7183 | |
170 | tristate "Analog Devices ADV7183 decoder" | |
171 | depends on VIDEO_V4L2 && I2C | |
172 | ---help--- | |
173 | V4l2 subdevice driver for the Analog Devices | |
174 | ADV7183 video decoder. | |
175 | ||
176 | To compile this driver as a module, choose M here: the | |
177 | module will be called adv7183. | |
178 | ||
54450f59 HV |
179 | config VIDEO_ADV7604 |
180 | tristate "Analog Devices ADV7604 decoder" | |
181 | depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API | |
182 | ---help--- | |
183 | Support for the Analog Devices ADV7604 video decoder. | |
184 | ||
185 | This is a Analog Devices Component/Graphics Digitizer | |
186 | with 4:1 Multiplexed HDMI Receiver. | |
187 | ||
188 | To compile this driver as a module, choose M here: the | |
189 | module will be called adv7604. | |
190 | ||
cb7a01ac MCC |
191 | config VIDEO_BT819 |
192 | tristate "BT819A VideoStream decoder" | |
193 | depends on VIDEO_V4L2 && I2C | |
194 | ---help--- | |
195 | Support for BT819A video decoder. | |
196 | ||
197 | To compile this driver as a module, choose M here: the | |
198 | module will be called bt819. | |
199 | ||
200 | config VIDEO_BT856 | |
201 | tristate "BT856 VideoStream decoder" | |
202 | depends on VIDEO_V4L2 && I2C | |
203 | ---help--- | |
204 | Support for BT856 video decoder. | |
205 | ||
206 | To compile this driver as a module, choose M here: the | |
207 | module will be called bt856. | |
208 | ||
209 | config VIDEO_BT866 | |
210 | tristate "BT866 VideoStream decoder" | |
211 | depends on VIDEO_V4L2 && I2C | |
212 | ---help--- | |
213 | Support for BT866 video decoder. | |
214 | ||
215 | To compile this driver as a module, choose M here: the | |
216 | module will be called bt866. | |
217 | ||
218 | config VIDEO_KS0127 | |
219 | tristate "KS0127 video decoder" | |
220 | depends on VIDEO_V4L2 && I2C | |
221 | ---help--- | |
222 | Support for KS0127 video decoder. | |
223 | ||
224 | This chip is used on AverMedia AVS6EYES Zoran-based MJPEG | |
225 | cards. | |
226 | ||
227 | To compile this driver as a module, choose M here: the | |
228 | module will be called ks0127. | |
229 | ||
230 | config VIDEO_SAA7110 | |
231 | tristate "Philips SAA7110 video decoder" | |
232 | depends on VIDEO_V4L2 && I2C | |
233 | ---help--- | |
234 | Support for the Philips SAA7110 video decoders. | |
235 | ||
236 | To compile this driver as a module, choose M here: the | |
237 | module will be called saa7110. | |
238 | ||
239 | config VIDEO_SAA711X | |
240 | tristate "Philips SAA7111/3/4/5 video decoders" | |
241 | depends on VIDEO_V4L2 && I2C | |
242 | ---help--- | |
243 | Support for the Philips SAA7111/3/4/5 video decoders. | |
244 | ||
245 | To compile this driver as a module, choose M here: the | |
246 | module will be called saa7115. | |
247 | ||
248 | config VIDEO_SAA7191 | |
249 | tristate "Philips SAA7191 video decoder" | |
250 | depends on VIDEO_V4L2 && I2C | |
251 | ---help--- | |
252 | Support for the Philips SAA7191 video decoder. | |
253 | ||
254 | To compile this driver as a module, choose M here: the | |
255 | module will be called saa7191. | |
256 | ||
257 | config VIDEO_TVP514X | |
258 | tristate "Texas Instruments TVP514x video decoder" | |
259 | depends on VIDEO_V4L2 && I2C | |
260 | ---help--- | |
261 | This is a Video4Linux2 sensor-level driver for the TI TVP5146/47 | |
262 | decoder. It is currently working with the TI OMAP3 camera | |
263 | controller. | |
264 | ||
265 | To compile this driver as a module, choose M here: the | |
266 | module will be called tvp514x. | |
267 | ||
268 | config VIDEO_TVP5150 | |
269 | tristate "Texas Instruments TVP5150 video decoder" | |
270 | depends on VIDEO_V4L2 && I2C | |
271 | ---help--- | |
272 | Support for the Texas Instruments TVP5150 video decoder. | |
273 | ||
274 | To compile this driver as a module, choose M here: the | |
275 | module will be called tvp5150. | |
276 | ||
277 | config VIDEO_TVP7002 | |
278 | tristate "Texas Instruments TVP7002 video decoder" | |
279 | depends on VIDEO_V4L2 && I2C | |
280 | ---help--- | |
281 | Support for the Texas Instruments TVP7002 video decoder. | |
282 | ||
283 | To compile this driver as a module, choose M here: the | |
284 | module will be called tvp7002. | |
285 | ||
286 | config VIDEO_VPX3220 | |
287 | tristate "vpx3220a, vpx3216b & vpx3214c video decoders" | |
288 | depends on VIDEO_V4L2 && I2C | |
289 | ---help--- | |
290 | Support for VPX322x video decoders. | |
291 | ||
292 | To compile this driver as a module, choose M here: the | |
293 | module will be called vpx3220. | |
294 | ||
295 | comment "Video and audio decoders" | |
296 | ||
297 | config VIDEO_SAA717X | |
298 | tristate "Philips SAA7171/3/4 audio/video decoders" | |
299 | depends on VIDEO_V4L2 && I2C | |
300 | ---help--- | |
301 | Support for the Philips SAA7171/3/4 audio/video decoders. | |
302 | ||
303 | To compile this driver as a module, choose M here: the | |
304 | module will be called saa717x. | |
305 | ||
306 | source "drivers/media/i2c/cx25840/Kconfig" | |
307 | ||
cb7a01ac MCC |
308 | comment "Video encoders" |
309 | ||
310 | config VIDEO_SAA7127 | |
311 | tristate "Philips SAA7127/9 digital video encoders" | |
312 | depends on VIDEO_V4L2 && I2C | |
313 | ---help--- | |
314 | Support for the Philips SAA7127/9 digital video encoders. | |
315 | ||
316 | To compile this driver as a module, choose M here: the | |
317 | module will be called saa7127. | |
318 | ||
319 | config VIDEO_SAA7185 | |
320 | tristate "Philips SAA7185 video encoder" | |
321 | depends on VIDEO_V4L2 && I2C | |
322 | ---help--- | |
323 | Support for the Philips SAA7185 video encoder. | |
324 | ||
325 | To compile this driver as a module, choose M here: the | |
326 | module will be called saa7185. | |
327 | ||
328 | config VIDEO_ADV7170 | |
329 | tristate "Analog Devices ADV7170 video encoder" | |
330 | depends on VIDEO_V4L2 && I2C | |
331 | ---help--- | |
332 | Support for the Analog Devices ADV7170 video encoder driver | |
333 | ||
334 | To compile this driver as a module, choose M here: the | |
335 | module will be called adv7170. | |
336 | ||
337 | config VIDEO_ADV7175 | |
338 | tristate "Analog Devices ADV7175 video encoder" | |
339 | depends on VIDEO_V4L2 && I2C | |
340 | ---help--- | |
341 | Support for the Analog Devices ADV7175 video encoder driver | |
342 | ||
343 | To compile this driver as a module, choose M here: the | |
344 | module will be called adv7175. | |
345 | ||
346 | config VIDEO_ADV7343 | |
347 | tristate "ADV7343 video encoder" | |
348 | depends on I2C | |
349 | help | |
350 | Support for Analog Devices I2C bus based ADV7343 encoder. | |
351 | ||
352 | To compile this driver as a module, choose M here: the | |
353 | module will be called adv7343. | |
354 | ||
355 | config VIDEO_ADV7393 | |
356 | tristate "ADV7393 video encoder" | |
357 | depends on I2C | |
358 | help | |
359 | Support for Analog Devices I2C bus based ADV7393 encoder. | |
360 | ||
361 | To compile this driver as a module, choose M here: the | |
362 | module will be called adv7393. | |
363 | ||
117a55b6 HV |
364 | config VIDEO_AD9389B |
365 | tristate "Analog Devices AD9389B encoder" | |
366 | depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API | |
367 | ---help--- | |
368 | Support for the Analog Devices AD9389B video encoder. | |
369 | ||
370 | This is a Analog Devices HDMI transmitter. | |
371 | ||
372 | To compile this driver as a module, choose M here: the | |
373 | module will be called ad9389b. | |
374 | ||
cb7a01ac MCC |
375 | config VIDEO_AK881X |
376 | tristate "AK8813/AK8814 video encoders" | |
377 | depends on I2C | |
378 | help | |
379 | Video output driver for AKM AK8813 and AK8814 TV encoders | |
380 | ||
381 | comment "Camera sensor devices" | |
382 | ||
383 | config VIDEO_APTINA_PLL | |
384 | tristate | |
385 | ||
386 | config VIDEO_SMIAPP_PLL | |
387 | tristate | |
388 | ||
389 | config VIDEO_OV7670 | |
390 | tristate "OmniVision OV7670 sensor support" | |
391 | depends on I2C && VIDEO_V4L2 | |
392 | depends on MEDIA_CAMERA_SUPPORT | |
393 | ---help--- | |
394 | This is a Video4Linux2 sensor-level driver for the OmniVision | |
395 | OV7670 VGA camera. It currently only works with the M88ALP01 | |
396 | controller. | |
397 | ||
84a15ded SN |
398 | config VIDEO_OV9650 |
399 | tristate "OmniVision OV9650/OV9652 sensor support" | |
400 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
401 | ---help--- | |
402 | This is a V4L2 sensor-level driver for the Omnivision | |
403 | OV9650 and OV9652 camera sensors. | |
404 | ||
cb7a01ac MCC |
405 | config VIDEO_VS6624 |
406 | tristate "ST VS6624 sensor support" | |
407 | depends on VIDEO_V4L2 && I2C | |
408 | depends on MEDIA_CAMERA_SUPPORT | |
409 | ---help--- | |
410 | This is a Video4Linux2 sensor-level driver for the ST VS6624 | |
411 | camera. | |
412 | ||
413 | To compile this driver as a module, choose M here: the | |
414 | module will be called vs6624. | |
415 | ||
416 | config VIDEO_MT9M032 | |
417 | tristate "MT9M032 camera sensor support" | |
418 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
419 | depends on MEDIA_CAMERA_SUPPORT | |
420 | select VIDEO_APTINA_PLL | |
421 | ---help--- | |
422 | This driver supports MT9M032 camera sensors from Aptina, monochrome | |
423 | models only. | |
424 | ||
425 | config VIDEO_MT9P031 | |
426 | tristate "Aptina MT9P031 support" | |
427 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
428 | depends on MEDIA_CAMERA_SUPPORT | |
429 | select VIDEO_APTINA_PLL | |
430 | ---help--- | |
431 | This is a Video4Linux2 sensor-level driver for the Aptina | |
432 | (Micron) mt9p031 5 Mpixel camera. | |
433 | ||
434 | config VIDEO_MT9T001 | |
435 | tristate "Aptina MT9T001 support" | |
436 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
437 | depends on MEDIA_CAMERA_SUPPORT | |
438 | ---help--- | |
439 | This is a Video4Linux2 sensor-level driver for the Aptina | |
440 | (Micron) mt0t001 3 Mpixel camera. | |
441 | ||
442 | config VIDEO_MT9V011 | |
443 | tristate "Micron mt9v011 sensor support" | |
444 | depends on I2C && VIDEO_V4L2 | |
445 | depends on MEDIA_CAMERA_SUPPORT | |
446 | ---help--- | |
447 | This is a Video4Linux2 sensor-level driver for the Micron | |
448 | mt0v011 1.3 Mpixel camera. It currently only works with the | |
449 | em28xx driver. | |
450 | ||
451 | config VIDEO_MT9V032 | |
452 | tristate "Micron MT9V032 sensor support" | |
453 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
454 | depends on MEDIA_CAMERA_SUPPORT | |
455 | ---help--- | |
456 | This is a Video4Linux2 sensor-level driver for the Micron | |
457 | MT9V032 752x480 CMOS sensor. | |
458 | ||
459 | config VIDEO_TCM825X | |
460 | tristate "TCM825x camera sensor support" | |
668a8b3b | 461 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_INT_DEVICE |
cb7a01ac MCC |
462 | depends on MEDIA_CAMERA_SUPPORT |
463 | ---help--- | |
464 | This is a driver for the Toshiba TCM825x VGA camera sensor. | |
465 | It is used for example in Nokia N800. | |
466 | ||
467 | config VIDEO_SR030PC30 | |
468 | tristate "Siliconfile SR030PC30 sensor support" | |
469 | depends on I2C && VIDEO_V4L2 | |
470 | depends on MEDIA_CAMERA_SUPPORT | |
471 | ---help--- | |
472 | This driver supports SR030PC30 VGA camera from Siliconfile | |
473 | ||
474 | config VIDEO_NOON010PC30 | |
475 | tristate "Siliconfile NOON010PC30 sensor support" | |
2cca7d4e | 476 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API |
cb7a01ac MCC |
477 | depends on MEDIA_CAMERA_SUPPORT |
478 | ---help--- | |
479 | This driver supports NOON010PC30 CIF camera from Siliconfile | |
480 | ||
481 | source "drivers/media/i2c/m5mols/Kconfig" | |
482 | ||
483 | config VIDEO_S5K6AA | |
484 | tristate "Samsung S5K6AAFX sensor support" | |
485 | depends on MEDIA_CAMERA_SUPPORT | |
486 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
487 | ---help--- | |
488 | This is a V4L2 sensor-level driver for Samsung S5K6AA(FX) 1.3M | |
489 | camera sensor with an embedded SoC image signal processor. | |
490 | ||
8b99312b SL |
491 | config VIDEO_S5K4ECGX |
492 | tristate "Samsung S5K4ECGX sensor support" | |
493 | depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
494 | ---help--- | |
495 | This is a V4L2 sensor-level driver for Samsung S5K4ECGX 5M | |
496 | camera sensor with an embedded SoC image signal processor. | |
497 | ||
cb7a01ac MCC |
498 | source "drivers/media/i2c/smiapp/Kconfig" |
499 | ||
cac47f18 AH |
500 | config VIDEO_S5C73M3 |
501 | tristate "Samsung S5C73M3 sensor support" | |
502 | depends on I2C && SPI && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API | |
503 | ---help--- | |
504 | This is a V4L2 sensor-level driver for Samsung S5C73M3 | |
505 | 8 Mpixel camera. | |
506 | ||
cb7a01ac MCC |
507 | comment "Flash devices" |
508 | ||
509 | config VIDEO_ADP1653 | |
510 | tristate "ADP1653 flash support" | |
511 | depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER | |
512 | depends on MEDIA_CAMERA_SUPPORT | |
513 | ---help--- | |
514 | This is a driver for the ADP1653 flash controller. It is used for | |
515 | example in Nokia N900. | |
516 | ||
517 | config VIDEO_AS3645A | |
518 | tristate "AS3645A flash driver support" | |
519 | depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER | |
520 | depends on MEDIA_CAMERA_SUPPORT | |
521 | ---help--- | |
522 | This is a driver for the AS3645A and LM3555 flash controllers. It has | |
523 | build in control for flash, torch and indicator LEDs. | |
524 | ||
525 | comment "Video improvement chips" | |
526 | ||
527 | config VIDEO_UPD64031A | |
528 | tristate "NEC Electronics uPD64031A Ghost Reduction" | |
529 | depends on VIDEO_V4L2 && I2C | |
530 | ---help--- | |
531 | Support for the NEC Electronics uPD64031A Ghost Reduction | |
532 | video chip. It is most often found in NTSC TV cards made for | |
533 | Japan and is used to reduce the 'ghosting' effect that can | |
534 | be present in analog TV broadcasts. | |
535 | ||
536 | To compile this driver as a module, choose M here: the | |
537 | module will be called upd64031a. | |
538 | ||
539 | config VIDEO_UPD64083 | |
540 | tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation" | |
541 | depends on VIDEO_V4L2 && I2C | |
542 | ---help--- | |
543 | Support for the NEC Electronics uPD64083 3-Dimensional Y/C | |
544 | separation video chip. It is used to improve the quality of | |
545 | the colors of a composite signal. | |
546 | ||
547 | To compile this driver as a module, choose M here: the | |
548 | module will be called upd64083. | |
549 | ||
550 | comment "Miscelaneous helper chips" | |
551 | ||
552 | config VIDEO_THS7303 | |
88da0183 LP |
553 | tristate "THS7303/53 Video Amplifier" |
554 | depends on VIDEO_V4L2 && I2C | |
cb7a01ac | 555 | help |
88da0183 | 556 | Support for TI THS7303/53 video amplifier |
cb7a01ac MCC |
557 | |
558 | To compile this driver as a module, choose M here: the | |
559 | module will be called ths7303. | |
560 | ||
561 | config VIDEO_M52790 | |
562 | tristate "Mitsubishi M52790 A/V switch" | |
563 | depends on VIDEO_V4L2 && I2C | |
564 | ---help--- | |
565 | Support for the Mitsubishi M52790 A/V switch. | |
566 | ||
567 | To compile this driver as a module, choose M here: the | |
568 | module will be called m52790. | |
fccea74f | 569 | endmenu |
e9d2f057 | 570 | |
fccea74f | 571 | menu "Sensors used on soc_camera driver" |
cb7a01ac | 572 | |
2a2d1cf4 MCC |
573 | if SOC_CAMERA |
574 | source "drivers/media/i2c/soc_camera/Kconfig" | |
575 | endif | |
576 | ||
cb7a01ac | 577 | endmenu |
fccea74f | 578 | |
cb7a01ac | 579 | endif |