Commit | Line | Data |
---|---|---|
f8e2e3ea SN |
1 | /* |
2 | * Driver for SiliconFile NOON010PC30 CIF (1/11") Image Sensor with ISP | |
3 | * | |
6426e14a | 4 | * Copyright (C) 2010 - 2011 Samsung Electronics Co., Ltd. |
f8e2e3ea SN |
5 | * Contact: Sylwester Nawrocki, <s.nawrocki@samsung.com> |
6 | * | |
7 | * Initial register configuration based on a driver authored by | |
8 | * HeungJun Kim <riverful.kim@samsung.com>. | |
9 | * | |
10 | * This program is free software; you can redistribute it and/or modify | |
11 | * it under the terms of the GNU General Public License as published by | |
12 | * the Free Software Foundation; either version 2 of the License, or | |
6426e14a | 13 | * (at your option) any later version. |
f8e2e3ea SN |
14 | */ |
15 | ||
16 | #include <linux/delay.h> | |
17 | #include <linux/gpio.h> | |
18 | #include <linux/i2c.h> | |
19 | #include <linux/slab.h> | |
20 | #include <linux/regulator/consumer.h> | |
21 | #include <media/noon010pc30.h> | |
f8e2e3ea | 22 | #include <linux/videodev2.h> |
7a707b89 | 23 | #include <linux/module.h> |
f8e2e3ea SN |
24 | #include <media/v4l2-ctrls.h> |
25 | #include <media/v4l2-device.h> | |
26 | #include <media/v4l2-mediabus.h> | |
27 | #include <media/v4l2-subdev.h> | |
28 | ||
29 | static int debug; | |
30 | module_param(debug, int, 0644); | |
31 | MODULE_PARM_DESC(debug, "Enable module debug trace. Set to 1 to enable."); | |
32 | ||
33 | #define MODULE_NAME "NOON010PC30" | |
34 | ||
35 | /* | |
36 | * Register offsets within a page | |
37 | * b15..b8 - page id, b7..b0 - register address | |
38 | */ | |
39 | #define POWER_CTRL_REG 0x0001 | |
40 | #define PAGEMODE_REG 0x03 | |
41 | #define DEVICE_ID_REG 0x0004 | |
42 | #define NOON010PC30_ID 0x86 | |
43 | #define VDO_CTL_REG(n) (0x0010 + (n)) | |
44 | #define SYNC_CTL_REG 0x0012 | |
45 | /* Window size and position */ | |
46 | #define WIN_ROWH_REG 0x0013 | |
47 | #define WIN_ROWL_REG 0x0014 | |
48 | #define WIN_COLH_REG 0x0015 | |
49 | #define WIN_COLL_REG 0x0016 | |
50 | #define WIN_HEIGHTH_REG 0x0017 | |
51 | #define WIN_HEIGHTL_REG 0x0018 | |
52 | #define WIN_WIDTHH_REG 0x0019 | |
53 | #define WIN_WIDTHL_REG 0x001A | |
54 | #define HBLANKH_REG 0x001B | |
55 | #define HBLANKL_REG 0x001C | |
56 | #define VSYNCH_REG 0x001D | |
57 | #define VSYNCL_REG 0x001E | |
58 | /* VSYNC control */ | |
59 | #define VS_CTL_REG(n) (0x00A1 + (n)) | |
60 | /* page 1 */ | |
61 | #define ISP_CTL_REG(n) (0x0110 + (n)) | |
62 | #define YOFS_REG 0x0119 | |
63 | #define DARK_YOFS_REG 0x011A | |
64 | #define SAT_CTL_REG 0x0120 | |
65 | #define BSAT_REG 0x0121 | |
66 | #define RSAT_REG 0x0122 | |
67 | /* Color correction */ | |
68 | #define CMC_CTL_REG 0x0130 | |
69 | #define CMC_OFSGH_REG 0x0133 | |
70 | #define CMC_OFSGL_REG 0x0135 | |
71 | #define CMC_SIGN_REG 0x0136 | |
72 | #define CMC_GOFS_REG 0x0137 | |
73 | #define CMC_COEF_REG(n) (0x0138 + (n)) | |
74 | #define CMC_OFS_REG(n) (0x0141 + (n)) | |
75 | /* Gamma correction */ | |
76 | #define GMA_CTL_REG 0x0160 | |
77 | #define GMA_COEF_REG(n) (0x0161 + (n)) | |
78 | /* Lens Shading */ | |
79 | #define LENS_CTRL_REG 0x01D0 | |
80 | #define LENS_XCEN_REG 0x01D1 | |
81 | #define LENS_YCEN_REG 0x01D2 | |
82 | #define LENS_RC_REG 0x01D3 | |
83 | #define LENS_GC_REG 0x01D4 | |
84 | #define LENS_BC_REG 0x01D5 | |
85 | #define L_AGON_REG 0x01D6 | |
86 | #define L_AGOFF_REG 0x01D7 | |
87 | /* Page 3 - Auto Exposure */ | |
88 | #define AE_CTL_REG(n) (0x0310 + (n)) | |
89 | #define AE_CTL9_REG 0x032C | |
90 | #define AE_CTL10_REG 0x032D | |
91 | #define AE_YLVL_REG 0x031C | |
92 | #define AE_YTH_REG(n) (0x031D + (n)) | |
93 | #define AE_WGT_REG 0x0326 | |
94 | #define EXP_TIMEH_REG 0x0333 | |
95 | #define EXP_TIMEM_REG 0x0334 | |
96 | #define EXP_TIMEL_REG 0x0335 | |
97 | #define EXP_MMINH_REG 0x0336 | |
98 | #define EXP_MMINL_REG 0x0337 | |
99 | #define EXP_MMAXH_REG 0x0338 | |
100 | #define EXP_MMAXM_REG 0x0339 | |
101 | #define EXP_MMAXL_REG 0x033A | |
102 | /* Page 4 - Auto White Balance */ | |
103 | #define AWB_CTL_REG(n) (0x0410 + (n)) | |
104 | #define AWB_ENABE 0x80 | |
105 | #define AWB_WGHT_REG 0x0419 | |
106 | #define BGAIN_PAR_REG(n) (0x044F + (n)) | |
107 | /* Manual white balance, when AWB_CTL2[0]=1 */ | |
108 | #define MWB_RGAIN_REG 0x0466 | |
109 | #define MWB_BGAIN_REG 0x0467 | |
110 | ||
111 | /* The token to mark an array end */ | |
112 | #define REG_TERM 0xFFFF | |
113 | ||
114 | struct noon010_format { | |
f5fe58fd | 115 | u32 code; |
f8e2e3ea SN |
116 | enum v4l2_colorspace colorspace; |
117 | u16 ispctl1_reg; | |
118 | }; | |
119 | ||
120 | struct noon010_frmsize { | |
121 | u16 width; | |
122 | u16 height; | |
123 | int vid_ctl1; | |
124 | }; | |
125 | ||
126 | static const char * const noon010_supply_name[] = { | |
127 | "vdd_core", "vddio", "vdda" | |
128 | }; | |
129 | ||
130 | #define NOON010_NUM_SUPPLIES ARRAY_SIZE(noon010_supply_name) | |
131 | ||
132 | struct noon010_info { | |
133 | struct v4l2_subdev sd; | |
6426e14a | 134 | struct media_pad pad; |
f8e2e3ea | 135 | struct v4l2_ctrl_handler hdl; |
6426e14a SN |
136 | struct regulator_bulk_data supply[NOON010_NUM_SUPPLIES]; |
137 | u32 gpio_nreset; | |
138 | u32 gpio_nstby; | |
139 | ||
140 | /* Protects the struct members below */ | |
141 | struct mutex lock; | |
142 | ||
f8e2e3ea SN |
143 | const struct noon010_format *curr_fmt; |
144 | const struct noon010_frmsize *curr_win; | |
6426e14a SN |
145 | unsigned int apply_new_cfg:1; |
146 | unsigned int streaming:1; | |
f8e2e3ea SN |
147 | unsigned int hflip:1; |
148 | unsigned int vflip:1; | |
149 | unsigned int power:1; | |
150 | u8 i2c_reg_page; | |
f8e2e3ea SN |
151 | }; |
152 | ||
153 | struct i2c_regval { | |
154 | u16 addr; | |
155 | u16 val; | |
156 | }; | |
157 | ||
158 | /* Supported resolutions. */ | |
159 | static const struct noon010_frmsize noon010_sizes[] = { | |
160 | { | |
161 | .width = 352, | |
162 | .height = 288, | |
163 | .vid_ctl1 = 0, | |
164 | }, { | |
165 | .width = 176, | |
166 | .height = 144, | |
167 | .vid_ctl1 = 0x10, | |
168 | }, { | |
169 | .width = 88, | |
170 | .height = 72, | |
171 | .vid_ctl1 = 0x20, | |
172 | }, | |
173 | }; | |
174 | ||
175 | /* Supported pixel formats. */ | |
176 | static const struct noon010_format noon010_formats[] = { | |
177 | { | |
f5fe58fd | 178 | .code = MEDIA_BUS_FMT_YUYV8_2X8, |
f8e2e3ea SN |
179 | .colorspace = V4L2_COLORSPACE_JPEG, |
180 | .ispctl1_reg = 0x03, | |
181 | }, { | |
f5fe58fd | 182 | .code = MEDIA_BUS_FMT_YVYU8_2X8, |
f8e2e3ea SN |
183 | .colorspace = V4L2_COLORSPACE_JPEG, |
184 | .ispctl1_reg = 0x02, | |
185 | }, { | |
f5fe58fd | 186 | .code = MEDIA_BUS_FMT_VYUY8_2X8, |
f8e2e3ea SN |
187 | .colorspace = V4L2_COLORSPACE_JPEG, |
188 | .ispctl1_reg = 0, | |
189 | }, { | |
f5fe58fd | 190 | .code = MEDIA_BUS_FMT_UYVY8_2X8, |
f8e2e3ea SN |
191 | .colorspace = V4L2_COLORSPACE_JPEG, |
192 | .ispctl1_reg = 0x01, | |
193 | }, { | |
f5fe58fd | 194 | .code = MEDIA_BUS_FMT_RGB565_2X8_BE, |
f8e2e3ea SN |
195 | .colorspace = V4L2_COLORSPACE_JPEG, |
196 | .ispctl1_reg = 0x40, | |
197 | }, | |
198 | }; | |
199 | ||
200 | static const struct i2c_regval noon010_base_regs[] = { | |
201 | { WIN_COLL_REG, 0x06 }, { HBLANKL_REG, 0x7C }, | |
202 | /* Color corection and saturation */ | |
203 | { ISP_CTL_REG(0), 0x30 }, { ISP_CTL_REG(2), 0x30 }, | |
204 | { YOFS_REG, 0x80 }, { DARK_YOFS_REG, 0x04 }, | |
205 | { SAT_CTL_REG, 0x1F }, { BSAT_REG, 0x90 }, | |
206 | { CMC_CTL_REG, 0x0F }, { CMC_OFSGH_REG, 0x3C }, | |
207 | { CMC_OFSGL_REG, 0x2C }, { CMC_SIGN_REG, 0x3F }, | |
208 | { CMC_COEF_REG(0), 0x79 }, { CMC_OFS_REG(0), 0x00 }, | |
209 | { CMC_COEF_REG(1), 0x39 }, { CMC_OFS_REG(1), 0x00 }, | |
210 | { CMC_COEF_REG(2), 0x00 }, { CMC_OFS_REG(2), 0x00 }, | |
211 | { CMC_COEF_REG(3), 0x11 }, { CMC_OFS_REG(3), 0x8B }, | |
212 | { CMC_COEF_REG(4), 0x65 }, { CMC_OFS_REG(4), 0x07 }, | |
213 | { CMC_COEF_REG(5), 0x14 }, { CMC_OFS_REG(5), 0x04 }, | |
214 | { CMC_COEF_REG(6), 0x01 }, { CMC_OFS_REG(6), 0x9C }, | |
215 | { CMC_COEF_REG(7), 0x33 }, { CMC_OFS_REG(7), 0x89 }, | |
216 | { CMC_COEF_REG(8), 0x74 }, { CMC_OFS_REG(8), 0x25 }, | |
217 | /* Automatic white balance */ | |
218 | { AWB_CTL_REG(0), 0x78 }, { AWB_CTL_REG(1), 0x2E }, | |
219 | { AWB_CTL_REG(2), 0x20 }, { AWB_CTL_REG(3), 0x85 }, | |
220 | /* Auto exposure */ | |
221 | { AE_CTL_REG(0), 0xDC }, { AE_CTL_REG(1), 0x81 }, | |
222 | { AE_CTL_REG(2), 0x30 }, { AE_CTL_REG(3), 0xA5 }, | |
223 | { AE_CTL_REG(4), 0x40 }, { AE_CTL_REG(5), 0x51 }, | |
224 | { AE_CTL_REG(6), 0x33 }, { AE_CTL_REG(7), 0x7E }, | |
225 | { AE_CTL9_REG, 0x00 }, { AE_CTL10_REG, 0x02 }, | |
226 | { AE_YLVL_REG, 0x44 }, { AE_YTH_REG(0), 0x34 }, | |
227 | { AE_YTH_REG(1), 0x30 }, { AE_WGT_REG, 0xD5 }, | |
228 | /* Lens shading compensation */ | |
229 | { LENS_CTRL_REG, 0x01 }, { LENS_XCEN_REG, 0x80 }, | |
230 | { LENS_YCEN_REG, 0x70 }, { LENS_RC_REG, 0x53 }, | |
231 | { LENS_GC_REG, 0x40 }, { LENS_BC_REG, 0x3E }, | |
232 | { REG_TERM, 0 }, | |
233 | }; | |
234 | ||
235 | static inline struct noon010_info *to_noon010(struct v4l2_subdev *sd) | |
236 | { | |
237 | return container_of(sd, struct noon010_info, sd); | |
238 | } | |
239 | ||
240 | static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) | |
241 | { | |
242 | return &container_of(ctrl->handler, struct noon010_info, hdl)->sd; | |
243 | } | |
244 | ||
245 | static inline int set_i2c_page(struct noon010_info *info, | |
246 | struct i2c_client *client, unsigned int reg) | |
247 | { | |
248 | u32 page = reg >> 8 & 0xFF; | |
249 | int ret = 0; | |
250 | ||
251 | if (info->i2c_reg_page != page && (reg & 0xFF) != 0x03) { | |
252 | ret = i2c_smbus_write_byte_data(client, PAGEMODE_REG, page); | |
253 | if (!ret) | |
254 | info->i2c_reg_page = page; | |
255 | } | |
256 | return ret; | |
257 | } | |
258 | ||
259 | static int cam_i2c_read(struct v4l2_subdev *sd, u32 reg_addr) | |
260 | { | |
261 | struct i2c_client *client = v4l2_get_subdevdata(sd); | |
262 | struct noon010_info *info = to_noon010(sd); | |
263 | int ret = set_i2c_page(info, client, reg_addr); | |
264 | ||
265 | if (ret) | |
266 | return ret; | |
267 | return i2c_smbus_read_byte_data(client, reg_addr & 0xFF); | |
268 | } | |
269 | ||
270 | static int cam_i2c_write(struct v4l2_subdev *sd, u32 reg_addr, u32 val) | |
271 | { | |
272 | struct i2c_client *client = v4l2_get_subdevdata(sd); | |
273 | struct noon010_info *info = to_noon010(sd); | |
274 | int ret = set_i2c_page(info, client, reg_addr); | |
275 | ||
276 | if (ret) | |
277 | return ret; | |
278 | return i2c_smbus_write_byte_data(client, reg_addr & 0xFF, val); | |
279 | } | |
280 | ||
281 | static inline int noon010_bulk_write_reg(struct v4l2_subdev *sd, | |
282 | const struct i2c_regval *msg) | |
283 | { | |
284 | while (msg->addr != REG_TERM) { | |
285 | int ret = cam_i2c_write(sd, msg->addr, msg->val); | |
286 | ||
287 | if (ret) | |
288 | return ret; | |
289 | msg++; | |
290 | } | |
291 | return 0; | |
292 | } | |
293 | ||
294 | /* Device reset and sleep mode control */ | |
295 | static int noon010_power_ctrl(struct v4l2_subdev *sd, bool reset, bool sleep) | |
296 | { | |
297 | struct noon010_info *info = to_noon010(sd); | |
298 | u8 reg = sleep ? 0xF1 : 0xF0; | |
299 | int ret = 0; | |
300 | ||
bc360324 | 301 | if (reset) { |
f8e2e3ea | 302 | ret = cam_i2c_write(sd, POWER_CTRL_REG, reg | 0x02); |
bc360324 SN |
303 | udelay(20); |
304 | } | |
f8e2e3ea SN |
305 | if (!ret) { |
306 | ret = cam_i2c_write(sd, POWER_CTRL_REG, reg); | |
307 | if (reset && !ret) | |
308 | info->i2c_reg_page = -1; | |
309 | } | |
310 | return ret; | |
311 | } | |
312 | ||
313 | /* Automatic white balance control */ | |
314 | static int noon010_enable_autowhitebalance(struct v4l2_subdev *sd, int on) | |
315 | { | |
316 | int ret; | |
317 | ||
318 | ret = cam_i2c_write(sd, AWB_CTL_REG(1), on ? 0x2E : 0x2F); | |
319 | if (!ret) | |
320 | ret = cam_i2c_write(sd, AWB_CTL_REG(0), on ? 0xFB : 0x7B); | |
321 | return ret; | |
322 | } | |
323 | ||
6426e14a | 324 | /* Called with struct noon010_info.lock mutex held */ |
f8e2e3ea SN |
325 | static int noon010_set_flip(struct v4l2_subdev *sd, int hflip, int vflip) |
326 | { | |
327 | struct noon010_info *info = to_noon010(sd); | |
328 | int reg, ret; | |
329 | ||
330 | reg = cam_i2c_read(sd, VDO_CTL_REG(1)); | |
331 | if (reg < 0) | |
332 | return reg; | |
333 | ||
334 | reg &= 0x7C; | |
335 | if (hflip) | |
336 | reg |= 0x01; | |
337 | if (vflip) | |
338 | reg |= 0x02; | |
339 | ||
340 | ret = cam_i2c_write(sd, VDO_CTL_REG(1), reg | 0x80); | |
341 | if (!ret) { | |
342 | info->hflip = hflip; | |
343 | info->vflip = vflip; | |
344 | } | |
345 | return ret; | |
346 | } | |
347 | ||
348 | /* Configure resolution and color format */ | |
349 | static int noon010_set_params(struct v4l2_subdev *sd) | |
350 | { | |
351 | struct noon010_info *info = to_noon010(sd); | |
f8e2e3ea | 352 | |
6426e14a SN |
353 | int ret = cam_i2c_write(sd, VDO_CTL_REG(0), |
354 | info->curr_win->vid_ctl1); | |
355 | if (ret) | |
356 | return ret; | |
357 | return cam_i2c_write(sd, ISP_CTL_REG(0), | |
358 | info->curr_fmt->ispctl1_reg); | |
f8e2e3ea SN |
359 | } |
360 | ||
361 | /* Find nearest matching image pixel size. */ | |
6426e14a SN |
362 | static int noon010_try_frame_size(struct v4l2_mbus_framefmt *mf, |
363 | const struct noon010_frmsize **size) | |
f8e2e3ea SN |
364 | { |
365 | unsigned int min_err = ~0; | |
366 | int i = ARRAY_SIZE(noon010_sizes); | |
367 | const struct noon010_frmsize *fsize = &noon010_sizes[0], | |
368 | *match = NULL; | |
369 | ||
370 | while (i--) { | |
371 | int err = abs(fsize->width - mf->width) | |
372 | + abs(fsize->height - mf->height); | |
373 | ||
374 | if (err < min_err) { | |
375 | min_err = err; | |
376 | match = fsize; | |
377 | } | |
378 | fsize++; | |
379 | } | |
380 | if (match) { | |
381 | mf->width = match->width; | |
382 | mf->height = match->height; | |
6426e14a SN |
383 | if (size) |
384 | *size = match; | |
f8e2e3ea SN |
385 | return 0; |
386 | } | |
387 | return -EINVAL; | |
388 | } | |
389 | ||
6426e14a | 390 | /* Called with info.lock mutex held */ |
f8e2e3ea SN |
391 | static int power_enable(struct noon010_info *info) |
392 | { | |
393 | int ret; | |
394 | ||
395 | if (info->power) { | |
396 | v4l2_info(&info->sd, "%s: sensor is already on\n", __func__); | |
397 | return 0; | |
398 | } | |
399 | ||
400 | if (gpio_is_valid(info->gpio_nstby)) | |
401 | gpio_set_value(info->gpio_nstby, 0); | |
402 | ||
403 | if (gpio_is_valid(info->gpio_nreset)) | |
404 | gpio_set_value(info->gpio_nreset, 0); | |
405 | ||
406 | ret = regulator_bulk_enable(NOON010_NUM_SUPPLIES, info->supply); | |
407 | if (ret) | |
408 | return ret; | |
409 | ||
410 | if (gpio_is_valid(info->gpio_nreset)) { | |
411 | msleep(50); | |
412 | gpio_set_value(info->gpio_nreset, 1); | |
413 | } | |
414 | if (gpio_is_valid(info->gpio_nstby)) { | |
415 | udelay(1000); | |
416 | gpio_set_value(info->gpio_nstby, 1); | |
417 | } | |
418 | if (gpio_is_valid(info->gpio_nreset)) { | |
419 | udelay(1000); | |
420 | gpio_set_value(info->gpio_nreset, 0); | |
421 | msleep(100); | |
422 | gpio_set_value(info->gpio_nreset, 1); | |
423 | msleep(20); | |
424 | } | |
425 | info->power = 1; | |
426 | ||
427 | v4l2_dbg(1, debug, &info->sd, "%s: sensor is on\n", __func__); | |
428 | return 0; | |
429 | } | |
430 | ||
6426e14a | 431 | /* Called with info.lock mutex held */ |
f8e2e3ea SN |
432 | static int power_disable(struct noon010_info *info) |
433 | { | |
434 | int ret; | |
435 | ||
436 | if (!info->power) { | |
437 | v4l2_info(&info->sd, "%s: sensor is already off\n", __func__); | |
438 | return 0; | |
439 | } | |
440 | ||
441 | ret = regulator_bulk_disable(NOON010_NUM_SUPPLIES, info->supply); | |
442 | if (ret) | |
443 | return ret; | |
444 | ||
445 | if (gpio_is_valid(info->gpio_nstby)) | |
446 | gpio_set_value(info->gpio_nstby, 0); | |
447 | ||
448 | if (gpio_is_valid(info->gpio_nreset)) | |
449 | gpio_set_value(info->gpio_nreset, 0); | |
450 | ||
451 | info->power = 0; | |
452 | ||
453 | v4l2_dbg(1, debug, &info->sd, "%s: sensor is off\n", __func__); | |
454 | ||
455 | return 0; | |
456 | } | |
457 | ||
458 | static int noon010_s_ctrl(struct v4l2_ctrl *ctrl) | |
459 | { | |
460 | struct v4l2_subdev *sd = to_sd(ctrl); | |
6426e14a SN |
461 | struct noon010_info *info = to_noon010(sd); |
462 | int ret = 0; | |
f8e2e3ea SN |
463 | |
464 | v4l2_dbg(1, debug, sd, "%s: ctrl_id: %d, value: %d\n", | |
465 | __func__, ctrl->id, ctrl->val); | |
466 | ||
6426e14a SN |
467 | mutex_lock(&info->lock); |
468 | /* | |
469 | * If the device is not powered up by the host driver do | |
470 | * not apply any controls to H/W at this time. Instead | |
471 | * the controls will be restored right after power-up. | |
472 | */ | |
473 | if (!info->power) | |
474 | goto unlock; | |
475 | ||
f8e2e3ea SN |
476 | switch (ctrl->id) { |
477 | case V4L2_CID_AUTO_WHITE_BALANCE: | |
6426e14a SN |
478 | ret = noon010_enable_autowhitebalance(sd, ctrl->val); |
479 | break; | |
f8e2e3ea | 480 | case V4L2_CID_BLUE_BALANCE: |
6426e14a SN |
481 | ret = cam_i2c_write(sd, MWB_BGAIN_REG, ctrl->val); |
482 | break; | |
f8e2e3ea | 483 | case V4L2_CID_RED_BALANCE: |
6426e14a SN |
484 | ret = cam_i2c_write(sd, MWB_RGAIN_REG, ctrl->val); |
485 | break; | |
f8e2e3ea | 486 | default: |
6426e14a | 487 | ret = -EINVAL; |
f8e2e3ea | 488 | } |
6426e14a SN |
489 | unlock: |
490 | mutex_unlock(&info->lock); | |
491 | return ret; | |
f8e2e3ea SN |
492 | } |
493 | ||
6426e14a | 494 | static int noon010_enum_mbus_code(struct v4l2_subdev *sd, |
f7234138 | 495 | struct v4l2_subdev_pad_config *cfg, |
6426e14a | 496 | struct v4l2_subdev_mbus_code_enum *code) |
f8e2e3ea | 497 | { |
6426e14a | 498 | if (code->index >= ARRAY_SIZE(noon010_formats)) |
f8e2e3ea SN |
499 | return -EINVAL; |
500 | ||
6426e14a | 501 | code->code = noon010_formats[code->index].code; |
f8e2e3ea SN |
502 | return 0; |
503 | } | |
504 | ||
f7234138 HV |
505 | static int noon010_get_fmt(struct v4l2_subdev *sd, |
506 | struct v4l2_subdev_pad_config *cfg, | |
6426e14a | 507 | struct v4l2_subdev_format *fmt) |
f8e2e3ea SN |
508 | { |
509 | struct noon010_info *info = to_noon010(sd); | |
6426e14a | 510 | struct v4l2_mbus_framefmt *mf; |
f8e2e3ea | 511 | |
6426e14a | 512 | if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { |
f7234138 HV |
513 | if (cfg) { |
514 | mf = v4l2_subdev_get_try_format(sd, cfg, 0); | |
6426e14a SN |
515 | fmt->format = *mf; |
516 | } | |
517 | return 0; | |
f8e2e3ea | 518 | } |
6426e14a | 519 | mf = &fmt->format; |
f8e2e3ea | 520 | |
6426e14a SN |
521 | mutex_lock(&info->lock); |
522 | mf->width = info->curr_win->width; | |
523 | mf->height = info->curr_win->height; | |
524 | mf->code = info->curr_fmt->code; | |
525 | mf->colorspace = info->curr_fmt->colorspace; | |
526 | mf->field = V4L2_FIELD_NONE; | |
f8e2e3ea | 527 | |
6426e14a | 528 | mutex_unlock(&info->lock); |
f8e2e3ea SN |
529 | return 0; |
530 | } | |
531 | ||
532 | /* Return nearest media bus frame format. */ | |
6426e14a | 533 | static const struct noon010_format *noon010_try_fmt(struct v4l2_subdev *sd, |
f8e2e3ea SN |
534 | struct v4l2_mbus_framefmt *mf) |
535 | { | |
536 | int i = ARRAY_SIZE(noon010_formats); | |
537 | ||
6426e14a | 538 | while (--i) |
f8e2e3ea SN |
539 | if (mf->code == noon010_formats[i].code) |
540 | break; | |
f8e2e3ea SN |
541 | mf->code = noon010_formats[i].code; |
542 | ||
543 | return &noon010_formats[i]; | |
544 | } | |
545 | ||
f7234138 | 546 | static int noon010_set_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_pad_config *cfg, |
6426e14a | 547 | struct v4l2_subdev_format *fmt) |
f8e2e3ea SN |
548 | { |
549 | struct noon010_info *info = to_noon010(sd); | |
6426e14a SN |
550 | const struct noon010_frmsize *size = NULL; |
551 | const struct noon010_format *nf; | |
552 | struct v4l2_mbus_framefmt *mf; | |
553 | int ret = 0; | |
f8e2e3ea | 554 | |
6426e14a SN |
555 | nf = noon010_try_fmt(sd, &fmt->format); |
556 | noon010_try_frame_size(&fmt->format, &size); | |
557 | fmt->format.colorspace = V4L2_COLORSPACE_JPEG; | |
fb3e0bc6 | 558 | fmt->format.field = V4L2_FIELD_NONE; |
f8e2e3ea | 559 | |
6426e14a | 560 | if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { |
f7234138 HV |
561 | if (cfg) { |
562 | mf = v4l2_subdev_get_try_format(sd, cfg, 0); | |
6426e14a SN |
563 | *mf = fmt->format; |
564 | } | |
565 | return 0; | |
566 | } | |
567 | mutex_lock(&info->lock); | |
568 | if (!info->streaming) { | |
569 | info->apply_new_cfg = 1; | |
570 | info->curr_fmt = nf; | |
571 | info->curr_win = size; | |
572 | } else { | |
573 | ret = -EBUSY; | |
574 | } | |
575 | mutex_unlock(&info->lock); | |
576 | return ret; | |
f8e2e3ea SN |
577 | } |
578 | ||
bc360324 | 579 | /* Called with struct noon010_info.lock mutex held */ |
f8e2e3ea SN |
580 | static int noon010_base_config(struct v4l2_subdev *sd) |
581 | { | |
bc360324 SN |
582 | int ret = noon010_bulk_write_reg(sd, noon010_base_regs); |
583 | if (!ret) | |
f8e2e3ea | 584 | ret = noon010_set_params(sd); |
f8e2e3ea SN |
585 | if (!ret) |
586 | ret = noon010_set_flip(sd, 1, 0); | |
f8e2e3ea | 587 | |
f8e2e3ea SN |
588 | return ret; |
589 | } | |
590 | ||
591 | static int noon010_s_power(struct v4l2_subdev *sd, int on) | |
592 | { | |
593 | struct noon010_info *info = to_noon010(sd); | |
bc360324 | 594 | int ret; |
f8e2e3ea | 595 | |
bc360324 | 596 | mutex_lock(&info->lock); |
f8e2e3ea SN |
597 | if (on) { |
598 | ret = power_enable(info); | |
bc360324 SN |
599 | if (!ret) |
600 | ret = noon010_base_config(sd); | |
f8e2e3ea SN |
601 | } else { |
602 | noon010_power_ctrl(sd, false, true); | |
603 | ret = power_disable(info); | |
f8e2e3ea | 604 | } |
bc360324 SN |
605 | mutex_unlock(&info->lock); |
606 | ||
607 | /* Restore the controls state */ | |
608 | if (!ret && on) | |
609 | ret = v4l2_ctrl_handler_setup(&info->hdl); | |
f8e2e3ea SN |
610 | |
611 | return ret; | |
612 | } | |
613 | ||
6426e14a SN |
614 | static int noon010_s_stream(struct v4l2_subdev *sd, int on) |
615 | { | |
616 | struct noon010_info *info = to_noon010(sd); | |
617 | int ret = 0; | |
618 | ||
619 | mutex_lock(&info->lock); | |
620 | if (!info->streaming != !on) { | |
621 | ret = noon010_power_ctrl(sd, false, !on); | |
622 | if (!ret) | |
623 | info->streaming = on; | |
624 | } | |
625 | if (!ret && on && info->apply_new_cfg) { | |
626 | ret = noon010_set_params(sd); | |
627 | if (!ret) | |
628 | info->apply_new_cfg = 0; | |
629 | } | |
630 | mutex_unlock(&info->lock); | |
631 | return ret; | |
632 | } | |
633 | ||
f8e2e3ea SN |
634 | static int noon010_log_status(struct v4l2_subdev *sd) |
635 | { | |
636 | struct noon010_info *info = to_noon010(sd); | |
637 | ||
638 | v4l2_ctrl_handler_log_status(&info->hdl, sd->name); | |
639 | return 0; | |
640 | } | |
641 | ||
6426e14a SN |
642 | static int noon010_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) |
643 | { | |
f7234138 | 644 | struct v4l2_mbus_framefmt *mf = v4l2_subdev_get_try_format(sd, fh->pad, 0); |
6426e14a SN |
645 | |
646 | mf->width = noon010_sizes[0].width; | |
647 | mf->height = noon010_sizes[0].height; | |
648 | mf->code = noon010_formats[0].code; | |
649 | mf->colorspace = V4L2_COLORSPACE_JPEG; | |
650 | mf->field = V4L2_FIELD_NONE; | |
651 | return 0; | |
652 | } | |
653 | ||
654 | static const struct v4l2_subdev_internal_ops noon010_subdev_internal_ops = { | |
655 | .open = noon010_open, | |
656 | }; | |
657 | ||
f8e2e3ea SN |
658 | static const struct v4l2_ctrl_ops noon010_ctrl_ops = { |
659 | .s_ctrl = noon010_s_ctrl, | |
660 | }; | |
661 | ||
662 | static const struct v4l2_subdev_core_ops noon010_core_ops = { | |
f8e2e3ea | 663 | .s_power = noon010_s_power, |
f8e2e3ea SN |
664 | .log_status = noon010_log_status, |
665 | }; | |
666 | ||
6426e14a SN |
667 | static struct v4l2_subdev_pad_ops noon010_pad_ops = { |
668 | .enum_mbus_code = noon010_enum_mbus_code, | |
669 | .get_fmt = noon010_get_fmt, | |
670 | .set_fmt = noon010_set_fmt, | |
671 | }; | |
672 | ||
673 | static struct v4l2_subdev_video_ops noon010_video_ops = { | |
674 | .s_stream = noon010_s_stream, | |
f8e2e3ea SN |
675 | }; |
676 | ||
677 | static const struct v4l2_subdev_ops noon010_ops = { | |
678 | .core = &noon010_core_ops, | |
6426e14a | 679 | .pad = &noon010_pad_ops, |
f8e2e3ea SN |
680 | .video = &noon010_video_ops, |
681 | }; | |
682 | ||
683 | /* Return 0 if NOON010PC30L sensor type was detected or -ENODEV otherwise. */ | |
684 | static int noon010_detect(struct i2c_client *client, struct noon010_info *info) | |
685 | { | |
686 | int ret; | |
687 | ||
688 | ret = power_enable(info); | |
689 | if (ret) | |
690 | return ret; | |
691 | ||
692 | ret = i2c_smbus_read_byte_data(client, DEVICE_ID_REG); | |
693 | if (ret < 0) | |
694 | dev_err(&client->dev, "I2C read failed: 0x%X\n", ret); | |
695 | ||
696 | power_disable(info); | |
697 | ||
698 | return ret == NOON010PC30_ID ? 0 : -ENODEV; | |
699 | } | |
700 | ||
701 | static int noon010_probe(struct i2c_client *client, | |
702 | const struct i2c_device_id *id) | |
703 | { | |
704 | struct noon010_info *info; | |
705 | struct v4l2_subdev *sd; | |
706 | const struct noon010pc30_platform_data *pdata | |
707 | = client->dev.platform_data; | |
708 | int ret; | |
709 | int i; | |
710 | ||
711 | if (!pdata) { | |
712 | dev_err(&client->dev, "No platform data!\n"); | |
713 | return -EIO; | |
714 | } | |
715 | ||
c02b211d | 716 | info = devm_kzalloc(&client->dev, sizeof(*info), GFP_KERNEL); |
f8e2e3ea SN |
717 | if (!info) |
718 | return -ENOMEM; | |
719 | ||
6426e14a | 720 | mutex_init(&info->lock); |
f8e2e3ea | 721 | sd = &info->sd; |
f8e2e3ea | 722 | v4l2_i2c_subdev_init(sd, client, &noon010_ops); |
2138d73b | 723 | strlcpy(sd->name, MODULE_NAME, sizeof(sd->name)); |
f8e2e3ea | 724 | |
6426e14a SN |
725 | sd->internal_ops = &noon010_subdev_internal_ops; |
726 | sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; | |
727 | ||
f8e2e3ea SN |
728 | v4l2_ctrl_handler_init(&info->hdl, 3); |
729 | ||
730 | v4l2_ctrl_new_std(&info->hdl, &noon010_ctrl_ops, | |
731 | V4L2_CID_AUTO_WHITE_BALANCE, 0, 1, 1, 1); | |
732 | v4l2_ctrl_new_std(&info->hdl, &noon010_ctrl_ops, | |
733 | V4L2_CID_RED_BALANCE, 0, 127, 1, 64); | |
734 | v4l2_ctrl_new_std(&info->hdl, &noon010_ctrl_ops, | |
735 | V4L2_CID_BLUE_BALANCE, 0, 127, 1, 64); | |
736 | ||
737 | sd->ctrl_handler = &info->hdl; | |
738 | ||
739 | ret = info->hdl.error; | |
740 | if (ret) | |
741 | goto np_err; | |
742 | ||
f8e2e3ea SN |
743 | info->i2c_reg_page = -1; |
744 | info->gpio_nreset = -EINVAL; | |
745 | info->gpio_nstby = -EINVAL; | |
bc360324 SN |
746 | info->curr_fmt = &noon010_formats[0]; |
747 | info->curr_win = &noon010_sizes[0]; | |
f8e2e3ea SN |
748 | |
749 | if (gpio_is_valid(pdata->gpio_nreset)) { | |
b015ba29 LP |
750 | ret = devm_gpio_request_one(&client->dev, pdata->gpio_nreset, |
751 | GPIOF_OUT_INIT_LOW, | |
752 | "NOON010PC30 NRST"); | |
f8e2e3ea SN |
753 | if (ret) { |
754 | dev_err(&client->dev, "GPIO request error: %d\n", ret); | |
755 | goto np_err; | |
756 | } | |
757 | info->gpio_nreset = pdata->gpio_nreset; | |
f8e2e3ea SN |
758 | gpio_export(info->gpio_nreset, 0); |
759 | } | |
760 | ||
761 | if (gpio_is_valid(pdata->gpio_nstby)) { | |
b015ba29 LP |
762 | ret = devm_gpio_request_one(&client->dev, pdata->gpio_nstby, |
763 | GPIOF_OUT_INIT_LOW, | |
764 | "NOON010PC30 NSTBY"); | |
f8e2e3ea SN |
765 | if (ret) { |
766 | dev_err(&client->dev, "GPIO request error: %d\n", ret); | |
b015ba29 | 767 | goto np_err; |
f8e2e3ea SN |
768 | } |
769 | info->gpio_nstby = pdata->gpio_nstby; | |
f8e2e3ea SN |
770 | gpio_export(info->gpio_nstby, 0); |
771 | } | |
772 | ||
773 | for (i = 0; i < NOON010_NUM_SUPPLIES; i++) | |
774 | info->supply[i].supply = noon010_supply_name[i]; | |
775 | ||
07e0e5b2 | 776 | ret = devm_regulator_bulk_get(&client->dev, NOON010_NUM_SUPPLIES, |
f8e2e3ea SN |
777 | info->supply); |
778 | if (ret) | |
b015ba29 | 779 | goto np_err; |
f8e2e3ea | 780 | |
6426e14a SN |
781 | info->pad.flags = MEDIA_PAD_FL_SOURCE; |
782 | sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR; | |
783 | ret = media_entity_init(&sd->entity, 1, &info->pad, 0); | |
784 | if (ret < 0) | |
07e0e5b2 | 785 | goto np_err; |
6426e14a | 786 | |
f8e2e3ea SN |
787 | ret = noon010_detect(client, info); |
788 | if (!ret) | |
789 | return 0; | |
790 | ||
f8e2e3ea SN |
791 | np_err: |
792 | v4l2_ctrl_handler_free(&info->hdl); | |
793 | v4l2_device_unregister_subdev(sd); | |
f8e2e3ea SN |
794 | return ret; |
795 | } | |
796 | ||
797 | static int noon010_remove(struct i2c_client *client) | |
798 | { | |
799 | struct v4l2_subdev *sd = i2c_get_clientdata(client); | |
800 | struct noon010_info *info = to_noon010(sd); | |
801 | ||
802 | v4l2_device_unregister_subdev(sd); | |
803 | v4l2_ctrl_handler_free(&info->hdl); | |
6426e14a | 804 | media_entity_cleanup(&sd->entity); |
c02b211d | 805 | |
f8e2e3ea SN |
806 | return 0; |
807 | } | |
808 | ||
809 | static const struct i2c_device_id noon010_id[] = { | |
810 | { MODULE_NAME, 0 }, | |
811 | { }, | |
812 | }; | |
813 | MODULE_DEVICE_TABLE(i2c, noon010_id); | |
814 | ||
815 | ||
816 | static struct i2c_driver noon010_i2c_driver = { | |
817 | .driver = { | |
818 | .name = MODULE_NAME | |
819 | }, | |
820 | .probe = noon010_probe, | |
821 | .remove = noon010_remove, | |
822 | .id_table = noon010_id, | |
823 | }; | |
824 | ||
c6e8d86f | 825 | module_i2c_driver(noon010_i2c_driver); |
f8e2e3ea SN |
826 | |
827 | MODULE_DESCRIPTION("Siliconfile NOON010PC30 camera driver"); | |
828 | MODULE_AUTHOR("Sylwester Nawrocki <s.nawrocki@samsung.com>"); | |
829 | MODULE_LICENSE("GPL"); |