projects / deliverable / linux.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
[media] soc-camera: remove struct soc_camera_device::video_lock
[deliverable/linux.git] / drivers / media / i2c / soc_camera / rj54n1cb0c.c
CommitLineData
8f37cf25 1/*
0172fea3 2 * Driver for RJ54N1CB0C CMOS Image Sensor from Sharp
8f37cf25
GL		 3 *
4 * Copyright (C) 2009, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 */
10
11#include <linux/delay.h>
12#include <linux/i2c.h>
13#include <linux/slab.h>
95d20109 14#include <linux/v4l2-mediabus.h>
8f37cf25 15#include <linux/videodev2.h>
7a707b89 16#include <linux/module.h>
8f37cf25 17
a6b5f200 18#include <media/rj54n1cb0c.h>
8f37cf25 19#include <media/soc_camera.h>
a6b5f200
GL		 20#include <media/v4l2-subdev.h>
21#include <media/v4l2-chip-ident.h>
25e965ad 22#include <media/v4l2-ctrls.h>
8f37cf25
GL		 23
24#define RJ54N1_DEV_CODE 0x0400
25#define RJ54N1_DEV_CODE2 0x0401
26#define RJ54N1_OUT_SEL 0x0403
27#define RJ54N1_XY_OUTPUT_SIZE_S_H 0x0404
28#define RJ54N1_X_OUTPUT_SIZE_S_L 0x0405
29#define RJ54N1_Y_OUTPUT_SIZE_S_L 0x0406
30#define RJ54N1_XY_OUTPUT_SIZE_P_H 0x0407
31#define RJ54N1_X_OUTPUT_SIZE_P_L 0x0408
32#define RJ54N1_Y_OUTPUT_SIZE_P_L 0x0409
33#define RJ54N1_LINE_LENGTH_PCK_S_H 0x040a
34#define RJ54N1_LINE_LENGTH_PCK_S_L 0x040b
35#define RJ54N1_LINE_LENGTH_PCK_P_H 0x040c
36#define RJ54N1_LINE_LENGTH_PCK_P_L 0x040d
37#define RJ54N1_RESIZE_N 0x040e
38#define RJ54N1_RESIZE_N_STEP 0x040f
39#define RJ54N1_RESIZE_STEP 0x0410
40#define RJ54N1_RESIZE_HOLD_H 0x0411
41#define RJ54N1_RESIZE_HOLD_L 0x0412
42#define RJ54N1_H_OBEN_OFS 0x0413
43#define RJ54N1_V_OBEN_OFS 0x0414
44#define RJ54N1_RESIZE_CONTROL 0x0415
a6b5f200 45#define RJ54N1_STILL_CONTROL 0x0417
8f37cf25
GL		 46#define RJ54N1_INC_USE_SEL_H 0x0425
47#define RJ54N1_INC_USE_SEL_L 0x0426
48#define RJ54N1_MIRROR_STILL_MODE 0x0427
49#define RJ54N1_INIT_START 0x0428
50#define RJ54N1_SCALE_1_2_LEV 0x0429
51#define RJ54N1_SCALE_4_LEV 0x042a
52#define RJ54N1_Y_GAIN 0x04d8
53#define RJ54N1_APT_GAIN_UP 0x04fa
54#define RJ54N1_RA_SEL_UL 0x0530
55#define RJ54N1_BYTE_SWAP 0x0531
56#define RJ54N1_OUT_SIGPO 0x053b
a6b5f200
GL		 57#define RJ54N1_WB_SEL_WEIGHT_I 0x054e
58#define RJ54N1_BIT8_WB 0x0569
59#define RJ54N1_HCAPS_WB 0x056a
60#define RJ54N1_VCAPS_WB 0x056b
61#define RJ54N1_HCAPE_WB 0x056c
62#define RJ54N1_VCAPE_WB 0x056d
63#define RJ54N1_EXPOSURE_CONTROL 0x058c
8f37cf25
GL		 64#define RJ54N1_FRAME_LENGTH_S_H 0x0595
65#define RJ54N1_FRAME_LENGTH_S_L 0x0596
66#define RJ54N1_FRAME_LENGTH_P_H 0x0597
67#define RJ54N1_FRAME_LENGTH_P_L 0x0598
a6b5f200
GL		 68#define RJ54N1_PEAK_H 0x05b7
69#define RJ54N1_PEAK_50 0x05b8
70#define RJ54N1_PEAK_60 0x05b9
71#define RJ54N1_PEAK_DIFF 0x05ba
8f37cf25
GL		 72#define RJ54N1_IOC 0x05ef
73#define RJ54N1_TG_BYPASS 0x0700
74#define RJ54N1_PLL_L 0x0701
75#define RJ54N1_PLL_N 0x0702
76#define RJ54N1_PLL_EN 0x0704
77#define RJ54N1_RATIO_TG 0x0706
78#define RJ54N1_RATIO_T 0x0707
79#define RJ54N1_RATIO_R 0x0708
80#define RJ54N1_RAMP_TGCLK_EN 0x0709
81#define RJ54N1_OCLK_DSP 0x0710
82#define RJ54N1_RATIO_OP 0x0711
83#define RJ54N1_RATIO_O 0x0712
84#define RJ54N1_OCLK_SEL_EN 0x0713
85#define RJ54N1_CLK_RST 0x0717
86#define RJ54N1_RESET_STANDBY 0x0718
a6b5f200 87#define RJ54N1_FWFLG 0x07fe
8f37cf25
GL		 88
89#define E_EXCLK (1 << 7)
90#define SOFT_STDBY (1 << 4)
91#define SEN_RSTX (1 << 2)
92#define TG_RSTX (1 << 1)
93#define DSP_RSTX (1 << 0)
94
95#define RESIZE_HOLD_SEL (1 << 2)
96#define RESIZE_GO (1 << 1)
97
a6b5f200
GL		 98/*
99 * When cropping, the camera automatically centers the cropped region, there
100 * doesn't seem to be a way to specify an explicit location of the rectangle.
101 */
8f37cf25
GL		 102#define RJ54N1_COLUMN_SKIP 0
103#define RJ54N1_ROW_SKIP 0
104#define RJ54N1_MAX_WIDTH 1600
105#define RJ54N1_MAX_HEIGHT 1200
106
a6b5f200
GL		 107#define PLL_L 2
108#define PLL_N 0x31
109
8f37cf25
GL		 110/* I2C addresses: 0x50, 0x51, 0x60, 0x61 */
111
760697be
GL		 112/* RJ54N1CB0C has only one fixed colorspace per pixelcode */
113struct rj54n1_datafmt {
114 enum v4l2_mbus_pixelcode code;
115 enum v4l2_colorspace colorspace;
116};
117
118/* Find a data format by a pixel code in an array */
119static const struct rj54n1_datafmt *rj54n1_find_datafmt(
120 enum v4l2_mbus_pixelcode code, const struct rj54n1_datafmt *fmt,
121 int n)
122{
123 int i;
124 for (i = 0; i < n; i++)
125 if (fmt[i].code == code)
126 return fmt + i;
127
128 return NULL;
129}
130
131static const struct rj54n1_datafmt rj54n1_colour_fmts[] = {
ace6e979
GL		 132 {V4L2_MBUS_FMT_YUYV8_2X8, V4L2_COLORSPACE_JPEG},
133 {V4L2_MBUS_FMT_YVYU8_2X8, V4L2_COLORSPACE_JPEG},
760697be
GL		 134 {V4L2_MBUS_FMT_RGB565_2X8_LE, V4L2_COLORSPACE_SRGB},
135 {V4L2_MBUS_FMT_RGB565_2X8_BE, V4L2_COLORSPACE_SRGB},
136 {V4L2_MBUS_FMT_SBGGR10_2X8_PADHI_LE, V4L2_COLORSPACE_SRGB},
137 {V4L2_MBUS_FMT_SBGGR10_2X8_PADLO_LE, V4L2_COLORSPACE_SRGB},
138 {V4L2_MBUS_FMT_SBGGR10_2X8_PADHI_BE, V4L2_COLORSPACE_SRGB},
139 {V4L2_MBUS_FMT_SBGGR10_2X8_PADLO_BE, V4L2_COLORSPACE_SRGB},
140 {V4L2_MBUS_FMT_SBGGR10_1X10, V4L2_COLORSPACE_SRGB},
8f37cf25
GL		 141};
142
143struct rj54n1_clock_div {
a6b5f200 144 u8 ratio_tg; /* can be 0 or an odd number */
8f37cf25
GL		 145 u8 ratio_t;
146 u8 ratio_r;
147 u8 ratio_op;
148 u8 ratio_o;
149};
150
151struct rj54n1 {
152 struct v4l2_subdev subdev;
25e965ad 153 struct v4l2_ctrl_handler hdl;
a6b5f200 154 struct rj54n1_clock_div clk_div;
760697be 155 const struct rj54n1_datafmt *fmt;
8f37cf25 156 struct v4l2_rect rect; /* Sensor window */
a6b5f200
GL		 157 unsigned int tgclk_mhz;
158 bool auto_wb;
8f37cf25
GL		 159 unsigned short width; /* Output window */
160 unsigned short height;
161 unsigned short resize; /* Sensor * 1024 / resize = Output */
8f37cf25
GL		 162 unsigned short scale;
163 u8 bank;
164};
165
166struct rj54n1_reg_val {
167 u16 reg;
168 u8 val;
169};
170
9d68e8de 171static const struct rj54n1_reg_val bank_4[] = {
8f37cf25
GL		 172 {0x417, 0},
173 {0x42c, 0},
174 {0x42d, 0xf0},
175 {0x42e, 0},
176 {0x42f, 0x50},
177 {0x430, 0xf5},
178 {0x431, 0x16},
179 {0x432, 0x20},
180 {0x433, 0},
181 {0x434, 0xc8},
182 {0x43c, 8},
183 {0x43e, 0x90},
184 {0x445, 0x83},
185 {0x4ba, 0x58},
186 {0x4bb, 4},
187 {0x4bc, 0x20},
188 {0x4db, 4},
189 {0x4fe, 2},
190};
191
9d68e8de 192static const struct rj54n1_reg_val bank_5[] = {
8f37cf25
GL		 193 {0x514, 0},
194 {0x516, 0},
195 {0x518, 0},
196 {0x51a, 0},
197 {0x51d, 0xff},
198 {0x56f, 0x28},
199 {0x575, 0x40},
200 {0x5bc, 0x48},
201 {0x5c1, 6},
202 {0x5e5, 0x11},
203 {0x5e6, 0x43},
204 {0x5e7, 0x33},
205 {0x5e8, 0x21},
206 {0x5e9, 0x30},
207 {0x5ea, 0x0},
208 {0x5eb, 0xa5},
209 {0x5ec, 0xff},
210 {0x5fe, 2},
211};
212
9d68e8de 213static const struct rj54n1_reg_val bank_7[] = {
8f37cf25
GL		 214 {0x70a, 0},
215 {0x714, 0xff},
216 {0x715, 0xff},
217 {0x716, 0x1f},
a6b5f200 218 {0x7FE, 2},
8f37cf25
GL		 219};
220
9d68e8de 221static const struct rj54n1_reg_val bank_8[] = {
8f37cf25
GL		 222 {0x800, 0x00},
223 {0x801, 0x01},
224 {0x802, 0x61},
225 {0x805, 0x00},
226 {0x806, 0x00},
227 {0x807, 0x00},
228 {0x808, 0x00},
229 {0x809, 0x01},
230 {0x80A, 0x61},
231 {0x80B, 0x00},
232 {0x80C, 0x01},
233 {0x80D, 0x00},
234 {0x80E, 0x00},
235 {0x80F, 0x00},
236 {0x810, 0x00},
237 {0x811, 0x01},
238 {0x812, 0x61},
239 {0x813, 0x00},
240 {0x814, 0x11},
241 {0x815, 0x00},
242 {0x816, 0x41},
243 {0x817, 0x00},
244 {0x818, 0x51},
245 {0x819, 0x01},
246 {0x81A, 0x1F},
247 {0x81B, 0x00},
248 {0x81C, 0x01},
249 {0x81D, 0x00},
250 {0x81E, 0x11},
251 {0x81F, 0x00},
252 {0x820, 0x41},
253 {0x821, 0x00},
254 {0x822, 0x51},
255 {0x823, 0x00},
256 {0x824, 0x00},
257 {0x825, 0x00},
258 {0x826, 0x47},
259 {0x827, 0x01},
260 {0x828, 0x4F},
261 {0x829, 0x00},
262 {0x82A, 0x00},
263 {0x82B, 0x00},
264 {0x82C, 0x30},
265 {0x82D, 0x00},
266 {0x82E, 0x40},
267 {0x82F, 0x00},
268 {0x830, 0xB3},
269 {0x831, 0x00},
270 {0x832, 0xE3},
271 {0x833, 0x00},
272 {0x834, 0x00},
273 {0x835, 0x00},
274 {0x836, 0x00},
275 {0x837, 0x00},
276 {0x838, 0x00},
277 {0x839, 0x01},
278 {0x83A, 0x61},
279 {0x83B, 0x00},
280 {0x83C, 0x01},
281 {0x83D, 0x00},
282 {0x83E, 0x00},
283 {0x83F, 0x00},
284 {0x840, 0x00},
285 {0x841, 0x01},
286 {0x842, 0x61},
287 {0x843, 0x00},
288 {0x844, 0x1D},
289 {0x845, 0x00},
290 {0x846, 0x00},
291 {0x847, 0x00},
292 {0x848, 0x00},
293 {0x849, 0x01},
294 {0x84A, 0x1F},
295 {0x84B, 0x00},
296 {0x84C, 0x05},
297 {0x84D, 0x00},
298 {0x84E, 0x19},
299 {0x84F, 0x01},
300 {0x850, 0x21},
301 {0x851, 0x01},
302 {0x852, 0x5D},
303 {0x853, 0x00},
304 {0x854, 0x00},
305 {0x855, 0x00},
306 {0x856, 0x19},
307 {0x857, 0x01},
308 {0x858, 0x21},
309 {0x859, 0x00},
310 {0x85A, 0x00},
311 {0x85B, 0x00},
312 {0x85C, 0x00},
313 {0x85D, 0x00},
314 {0x85E, 0x00},
315 {0x85F, 0x00},
316 {0x860, 0xB3},
317 {0x861, 0x00},
318 {0x862, 0xE3},
319 {0x863, 0x00},
320 {0x864, 0x00},
321 {0x865, 0x00},
322 {0x866, 0x00},
323 {0x867, 0x00},
324 {0x868, 0x00},
325 {0x869, 0xE2},
326 {0x86A, 0x00},
327 {0x86B, 0x01},
328 {0x86C, 0x06},
329 {0x86D, 0x00},
330 {0x86E, 0x00},
331 {0x86F, 0x00},
332 {0x870, 0x60},
333 {0x871, 0x8C},
334 {0x872, 0x10},
335 {0x873, 0x00},
336 {0x874, 0xE0},
337 {0x875, 0x00},
338 {0x876, 0x27},
339 {0x877, 0x01},
340 {0x878, 0x00},
341 {0x879, 0x00},
342 {0x87A, 0x00},
343 {0x87B, 0x03},
344 {0x87C, 0x00},
345 {0x87D, 0x00},
346 {0x87E, 0x00},
347 {0x87F, 0x00},
348 {0x880, 0x00},
349 {0x881, 0x00},
350 {0x882, 0x00},
351 {0x883, 0x00},
352 {0x884, 0x00},
353 {0x885, 0x00},
354 {0x886, 0xF8},
355 {0x887, 0x00},
356 {0x888, 0x03},
357 {0x889, 0x00},
358 {0x88A, 0x64},
359 {0x88B, 0x00},
360 {0x88C, 0x03},
361 {0x88D, 0x00},
362 {0x88E, 0xB1},
363 {0x88F, 0x00},
364 {0x890, 0x03},
365 {0x891, 0x01},
366 {0x892, 0x1D},
367 {0x893, 0x00},
368 {0x894, 0x03},
369 {0x895, 0x01},
370 {0x896, 0x4B},
371 {0x897, 0x00},
372 {0x898, 0xE5},
373 {0x899, 0x00},
374 {0x89A, 0x01},
375 {0x89B, 0x00},
376 {0x89C, 0x01},
377 {0x89D, 0x04},
378 {0x89E, 0xC8},
379 {0x89F, 0x00},
380 {0x8A0, 0x01},
381 {0x8A1, 0x01},
382 {0x8A2, 0x61},
383 {0x8A3, 0x00},
384 {0x8A4, 0x01},
385 {0x8A5, 0x00},
386 {0x8A6, 0x00},
387 {0x8A7, 0x00},
388 {0x8A8, 0x00},
389 {0x8A9, 0x00},
390 {0x8AA, 0x7F},
391 {0x8AB, 0x03},
392 {0x8AC, 0x00},
393 {0x8AD, 0x00},
394 {0x8AE, 0x00},
395 {0x8AF, 0x00},
396 {0x8B0, 0x00},
397 {0x8B1, 0x00},
398 {0x8B6, 0x00},
399 {0x8B7, 0x01},
400 {0x8B8, 0x00},
401 {0x8B9, 0x00},
402 {0x8BA, 0x02},
403 {0x8BB, 0x00},
404 {0x8BC, 0xFF},
405 {0x8BD, 0x00},
a6b5f200 406 {0x8FE, 2},
8f37cf25
GL		 407};
408
9d68e8de 409static const struct rj54n1_reg_val bank_10[] = {
8f37cf25
GL		 410 {0x10bf, 0x69}
411};
412
413/* Clock dividers - these are default register values, divider = register + 1 */
9d68e8de 414static const struct rj54n1_clock_div clk_div = {
8f37cf25
GL		 415 .ratio_tg = 3 /* default: 5 */,
416 .ratio_t = 4 /* default: 1 */,
417 .ratio_r = 4 /* default: 0 */,
418 .ratio_op = 1 /* default: 5 */,
419 .ratio_o = 9 /* default: 0 */,
420};
421
422static struct rj54n1 *to_rj54n1(const struct i2c_client *client)
423{
424 return container_of(i2c_get_clientdata(client), struct rj54n1, subdev);
425}
426
427static int reg_read(struct i2c_client *client, const u16 reg)
428{
429 struct rj54n1 *rj54n1 = to_rj54n1(client);
430 int ret;
431
432 /* set bank */
433 if (rj54n1->bank != reg >> 8) {
434 dev_dbg(&client->dev, "[0x%x] = 0x%x\n", 0xff, reg >> 8);
435 ret = i2c_smbus_write_byte_data(client, 0xff, reg >> 8);
436 if (ret < 0)
437 return ret;
438 rj54n1->bank = reg >> 8;
439 }
440 return i2c_smbus_read_byte_data(client, reg & 0xff);
441}
442
443static int reg_write(struct i2c_client *client, const u16 reg,
444 const u8 data)
445{
446 struct rj54n1 *rj54n1 = to_rj54n1(client);
447 int ret;
448
449 /* set bank */
450 if (rj54n1->bank != reg >> 8) {
451 dev_dbg(&client->dev, "[0x%x] = 0x%x\n", 0xff, reg >> 8);
452 ret = i2c_smbus_write_byte_data(client, 0xff, reg >> 8);
453 if (ret < 0)
454 return ret;
455 rj54n1->bank = reg >> 8;
456 }
457 dev_dbg(&client->dev, "[0x%x] = 0x%x\n", reg & 0xff, data);
458 return i2c_smbus_write_byte_data(client, reg & 0xff, data);
459}
460
461static int reg_set(struct i2c_client *client, const u16 reg,
462 const u8 data, const u8 mask)
463{
464 int ret;
465
466 ret = reg_read(client, reg);
467 if (ret < 0)
468 return ret;
469 return reg_write(client, reg, (ret & ~mask) | (data & mask));
470}
471
472static int reg_write_multiple(struct i2c_client *client,
473 const struct rj54n1_reg_val *rv, const int n)
474{
475 int i, ret;
476
477 for (i = 0; i < n; i++) {
478 ret = reg_write(client, rv->reg, rv->val);
479 if (ret < 0)
480 return ret;
481 rv++;
482 }
483
484 return 0;
485}
486
3805f201 487static int rj54n1_enum_fmt(struct v4l2_subdev *sd, unsigned int index,
760697be
GL		 488 enum v4l2_mbus_pixelcode *code)
489{
3805f201 490 if (index >= ARRAY_SIZE(rj54n1_colour_fmts))
760697be
GL		 491 return -EINVAL;
492
493 *code = rj54n1_colour_fmts[index].code;
494 return 0;
495}
496
8f37cf25
GL		 497static int rj54n1_s_stream(struct v4l2_subdev *sd, int enable)
498{
c4ce6d14 499 struct i2c_client *client = v4l2_get_subdevdata(sd);
a6b5f200
GL		 500
501 /* Switch between preview and still shot modes */
502 return reg_set(client, RJ54N1_STILL_CONTROL, (!enable) << 7, 0x80);
8f37cf25
GL		 503}
504
8f37cf25
GL		 505static int rj54n1_set_rect(struct i2c_client *client,
506 u16 reg_x, u16 reg_y, u16 reg_xy,
507 u32 width, u32 height)
508{
509 int ret;
510
511 ret = reg_write(client, reg_xy,
512 ((width >> 4) & 0x70) |
513 ((height >> 8) & 7));
514
515 if (!ret)
516 ret = reg_write(client, reg_x, width & 0xff);
517 if (!ret)
518 ret = reg_write(client, reg_y, height & 0xff);
519
520 return ret;
521}
522
523/*
524 * Some commands, specifically certain initialisation sequences, require
525 * a commit operation.
526 */
527static int rj54n1_commit(struct i2c_client *client)
528{
529 int ret = reg_write(client, RJ54N1_INIT_START, 1);
530 msleep(10);
531 if (!ret)
532 ret = reg_write(client, RJ54N1_INIT_START, 0);
533 return ret;
534}
535
e26b3144
MN		 536static int rj54n1_sensor_scale(struct v4l2_subdev *sd, s32 *in_w, s32 *in_h,
537 s32 *out_w, s32 *out_h);
a6b5f200 538
4f996594 539static int rj54n1_s_crop(struct v4l2_subdev *sd, const struct v4l2_crop *a)
a6b5f200 540{
c4ce6d14 541 struct i2c_client *client = v4l2_get_subdevdata(sd);
a6b5f200 542 struct rj54n1 *rj54n1 = to_rj54n1(client);
4f996594 543 const struct v4l2_rect *rect = &a->c;
e26b3144 544 int dummy = 0, output_w, output_h,
a6b5f200
GL		 545 input_w = rect->width, input_h = rect->height;
546 int ret;
547
548 /* arbitrary minimum width and height, edges unimportant */
549 soc_camera_limit_side(&dummy, &input_w,
550 RJ54N1_COLUMN_SKIP, 8, RJ54N1_MAX_WIDTH);
551
552 soc_camera_limit_side(&dummy, &input_h,
553 RJ54N1_ROW_SKIP, 8, RJ54N1_MAX_HEIGHT);
554
555 output_w = (input_w * 1024 + rj54n1->resize / 2) / rj54n1->resize;
556 output_h = (input_h * 1024 + rj54n1->resize / 2) / rj54n1->resize;
557
e26b3144 558 dev_dbg(&client->dev, "Scaling for %dx%d : %u = %dx%d\n",
a6b5f200
GL		 559 input_w, input_h, rj54n1->resize, output_w, output_h);
560
561 ret = rj54n1_sensor_scale(sd, &input_w, &input_h, &output_w, &output_h);
562 if (ret < 0)
563 return ret;
564
565 rj54n1->width = output_w;
566 rj54n1->height = output_h;
567 rj54n1->resize = ret;
568 rj54n1->rect.width = input_w;
569 rj54n1->rect.height = input_h;
570
571 return 0;
572}
573
8f37cf25
GL		 574static int rj54n1_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
575{
c4ce6d14 576 struct i2c_client *client = v4l2_get_subdevdata(sd);
8f37cf25
GL		 577 struct rj54n1 *rj54n1 = to_rj54n1(client);
578
579 a->c = rj54n1->rect;
580 a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
581
582 return 0;
583}
584
585static int rj54n1_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a)
586{
587 a->bounds.left = RJ54N1_COLUMN_SKIP;
588 a->bounds.top = RJ54N1_ROW_SKIP;
589 a->bounds.width = RJ54N1_MAX_WIDTH;
590 a->bounds.height = RJ54N1_MAX_HEIGHT;
591 a->defrect = a->bounds;
592 a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
593 a->pixelaspect.numerator = 1;
594 a->pixelaspect.denominator = 1;
595
596 return 0;
597}
598
760697be
GL		 599static int rj54n1_g_fmt(struct v4l2_subdev *sd,
600 struct v4l2_mbus_framefmt *mf)
8f37cf25 601{
c4ce6d14 602 struct i2c_client *client = v4l2_get_subdevdata(sd);
8f37cf25 603 struct rj54n1 *rj54n1 = to_rj54n1(client);
8f37cf25 604
760697be
GL		 605 mf->code = rj54n1->fmt->code;
606 mf->colorspace = rj54n1->fmt->colorspace;
607 mf->field = V4L2_FIELD_NONE;
608 mf->width = rj54n1->width;
609 mf->height = rj54n1->height;
8f37cf25
GL		 610
611 return 0;
612}
613
614/*
615 * The actual geometry configuration routine. It scales the input window into
616 * the output one, updates the window sizes and returns an error or the resize
617 * coefficient on success. Note: we only use the "Fixed Scaling" on this camera.
618 */
e26b3144
MN		 619static int rj54n1_sensor_scale(struct v4l2_subdev *sd, s32 *in_w, s32 *in_h,
620 s32 *out_w, s32 *out_h)
8f37cf25 621{
c4ce6d14 622 struct i2c_client *client = v4l2_get_subdevdata(sd);
a6b5f200 623 struct rj54n1 *rj54n1 = to_rj54n1(client);
8f37cf25
GL		 624 unsigned int skip, resize, input_w = *in_w, input_h = *in_h,
625 output_w = *out_w, output_h = *out_h;
a6b5f200
GL		 626 u16 inc_sel, wb_bit8, wb_left, wb_right, wb_top, wb_bottom;
627 unsigned int peak, peak_50, peak_60;
8f37cf25
GL		 628 int ret;
629
a6b5f200
GL		 630 /*
631 * We have a problem with crops, where the window is larger than 512x384
632 * and output window is larger than a half of the input one. In this
633 * case we have to either reduce the input window to equal or below
634 * 512x384 or the output window to equal or below 1/2 of the input.
635 */
636 if (output_w > max(512U, input_w / 2)) {
637 if (2 * output_w > RJ54N1_MAX_WIDTH) {
638 input_w = RJ54N1_MAX_WIDTH;
639 output_w = RJ54N1_MAX_WIDTH / 2;
640 } else {
641 input_w = output_w * 2;
642 }
643
644 dev_dbg(&client->dev, "Adjusted output width: in %u, out %u\n",
645 input_w, output_w);
646 }
647
648 if (output_h > max(384U, input_h / 2)) {
649 if (2 * output_h > RJ54N1_MAX_HEIGHT) {
650 input_h = RJ54N1_MAX_HEIGHT;
651 output_h = RJ54N1_MAX_HEIGHT / 2;
652 } else {
653 input_h = output_h * 2;
654 }
655
656 dev_dbg(&client->dev, "Adjusted output height: in %u, out %u\n",
657 input_h, output_h);
658 }
659
660 /* Idea: use the read mode for snapshots, handle separate geometries */
8f37cf25
GL		 661 ret = rj54n1_set_rect(client, RJ54N1_X_OUTPUT_SIZE_S_L,
662 RJ54N1_Y_OUTPUT_SIZE_S_L,
663 RJ54N1_XY_OUTPUT_SIZE_S_H, output_w, output_h);
664 if (!ret)
665 ret = rj54n1_set_rect(client, RJ54N1_X_OUTPUT_SIZE_P_L,
666 RJ54N1_Y_OUTPUT_SIZE_P_L,
667 RJ54N1_XY_OUTPUT_SIZE_P_H, output_w, output_h);
668
669 if (ret < 0)
670 return ret;
671
a6b5f200 672 if (output_w > input_w && output_h > input_h) {
8f37cf25
GL		 673 input_w = output_w;
674 input_h = output_h;
675
676 resize = 1024;
677 } else {
678 unsigned int resize_x, resize_y;
a6b5f200
GL		 679 resize_x = (input_w * 1024 + output_w / 2) / output_w;
680 resize_y = (input_h * 1024 + output_h / 2) / output_h;
681
682 /* We want max(resize_x, resize_y), check if it still fits */
683 if (resize_x > resize_y &&
684 (output_h * resize_x + 512) / 1024 > RJ54N1_MAX_HEIGHT)
685 resize = (RJ54N1_MAX_HEIGHT * 1024 + output_h / 2) /
686 output_h;
687 else if (resize_y > resize_x &&
688 (output_w * resize_y + 512) / 1024 > RJ54N1_MAX_WIDTH)
689 resize = (RJ54N1_MAX_WIDTH * 1024 + output_w / 2) /
690 output_w;
691 else
692 resize = max(resize_x, resize_y);
8f37cf25
GL		 693
694 /* Prohibited value ranges */
695 switch (resize) {
696 case 2040 ... 2047:
697 resize = 2039;
698 break;
699 case 4080 ... 4095:
700 resize = 4079;
701 break;
702 case 8160 ... 8191:
703 resize = 8159;
704 break;
a6b5f200 705 case 16320 ... 16384:
8f37cf25
GL		 706 resize = 16319;
707 }
8f37cf25
GL		 708 }
709
710 /* Set scaling */
711 ret = reg_write(client, RJ54N1_RESIZE_HOLD_L, resize & 0xff);
712 if (!ret)
713 ret = reg_write(client, RJ54N1_RESIZE_HOLD_H, resize >> 8);
714
715 if (ret < 0)
716 return ret;
717
718 /*
719 * Configure a skipping bitmask. The sensor will select a skipping value
a6b5f200
GL		 720 * among set bits automatically. This is very unclear in the datasheet
721 * too. I was told, in this register one enables all skipping values,
722 * that are required for a specific resize, and the camera selects
723 * automatically, which ones to use. But it is unclear how to identify,
724 * which cropping values are needed. Secondly, why don't we just set all
725 * bits and let the camera choose? Would it increase processing time and
726 * reduce the framerate? Using 0xfffc for INC_USE_SEL doesn't seem to
727 * improve the image quality or stability for larger frames (see comment
728 * above), but I didn't check the framerate.
8f37cf25 729 */
e26b3144 730 skip = min(resize / 1024, 15U);
a6b5f200 731
8f37cf25
GL		 732 inc_sel = 1 << skip;
733
734 if (inc_sel <= 2)
735 inc_sel = 0xc;
736 else if (resize & 1023 && skip < 15)
737 inc_sel |= 1 << (skip + 1);
738
739 ret = reg_write(client, RJ54N1_INC_USE_SEL_L, inc_sel & 0xfc);
740 if (!ret)
741 ret = reg_write(client, RJ54N1_INC_USE_SEL_H, inc_sel >> 8);
742
a6b5f200
GL		 743 if (!rj54n1->auto_wb) {
744 /* Auto white balance window */
745 wb_left = output_w / 16;
746 wb_right = (3 * output_w / 4 - 3) / 4;
747 wb_top = output_h / 16;
748 wb_bottom = (3 * output_h / 4 - 3) / 4;
749 wb_bit8 = ((wb_left >> 2) & 0x40) | ((wb_top >> 4) & 0x10) |
750 ((wb_right >> 6) & 4) | ((wb_bottom >> 8) & 1);
751
752 if (!ret)
753 ret = reg_write(client, RJ54N1_BIT8_WB, wb_bit8);
754 if (!ret)
755 ret = reg_write(client, RJ54N1_HCAPS_WB, wb_left);
756 if (!ret)
757 ret = reg_write(client, RJ54N1_VCAPS_WB, wb_top);
758 if (!ret)
759 ret = reg_write(client, RJ54N1_HCAPE_WB, wb_right);
760 if (!ret)
761 ret = reg_write(client, RJ54N1_VCAPE_WB, wb_bottom);
762 }
763
764 /* Antiflicker */
765 peak = 12 * RJ54N1_MAX_WIDTH * (1 << 14) * resize / rj54n1->tgclk_mhz /
766 10000;
767 peak_50 = peak / 6;
768 peak_60 = peak / 5;
769
770 if (!ret)
771 ret = reg_write(client, RJ54N1_PEAK_H,
772 ((peak_50 >> 4) & 0xf0) | (peak_60 >> 8));
773 if (!ret)
774 ret = reg_write(client, RJ54N1_PEAK_50, peak_50);
775 if (!ret)
776 ret = reg_write(client, RJ54N1_PEAK_60, peak_60);
777 if (!ret)
778 ret = reg_write(client, RJ54N1_PEAK_DIFF, peak / 150);
779
8f37cf25
GL		 780 /* Start resizing */
781 if (!ret)
782 ret = reg_write(client, RJ54N1_RESIZE_CONTROL,
783 RESIZE_HOLD_SEL | RESIZE_GO | 1);
784
785 if (ret < 0)
786 return ret;
787
8f37cf25
GL		 788 /* Constant taken from manufacturer's example */
789 msleep(230);
790
791 ret = reg_write(client, RJ54N1_RESIZE_CONTROL, RESIZE_HOLD_SEL | 1);
792 if (ret < 0)
793 return ret;
794
a6b5f200
GL		 795 *in_w = (output_w * resize + 512) / 1024;
796 *in_h = (output_h * resize + 512) / 1024;
8f37cf25
GL		 797 *out_w = output_w;
798 *out_h = output_h;
799
e26b3144 800 dev_dbg(&client->dev, "Scaled for %dx%d : %u = %ux%u, skip %u\n",
a6b5f200
GL		 801 *in_w, *in_h, resize, output_w, output_h, skip);
802
8f37cf25
GL		 803 return resize;
804}
805
806static int rj54n1_set_clock(struct i2c_client *client)
807{
808 struct rj54n1 *rj54n1 = to_rj54n1(client);
809 int ret;
810
811 /* Enable external clock */
812 ret = reg_write(client, RJ54N1_RESET_STANDBY, E_EXCLK | SOFT_STDBY);
a6b5f200 813 /* Leave stand-by. Note: use this when implementing suspend / resume */
8f37cf25
GL		 814 if (!ret)
815 ret = reg_write(client, RJ54N1_RESET_STANDBY, E_EXCLK);
816
817 if (!ret)
a6b5f200 818 ret = reg_write(client, RJ54N1_PLL_L, PLL_L);
8f37cf25 819 if (!ret)
a6b5f200 820 ret = reg_write(client, RJ54N1_PLL_N, PLL_N);
8f37cf25
GL		 821
822 /* TGCLK dividers */
823 if (!ret)
824 ret = reg_write(client, RJ54N1_RATIO_TG,
825 rj54n1->clk_div.ratio_tg);
826 if (!ret)
827 ret = reg_write(client, RJ54N1_RATIO_T,
828 rj54n1->clk_div.ratio_t);
829 if (!ret)
830 ret = reg_write(client, RJ54N1_RATIO_R,
831 rj54n1->clk_div.ratio_r);
832
833 /* Enable TGCLK & RAMP */
834 if (!ret)
835 ret = reg_write(client, RJ54N1_RAMP_TGCLK_EN, 3);
836
837 /* Disable clock output */
838 if (!ret)
839 ret = reg_write(client, RJ54N1_OCLK_DSP, 0);
840
841 /* Set divisors */
842 if (!ret)
843 ret = reg_write(client, RJ54N1_RATIO_OP,
844 rj54n1->clk_div.ratio_op);
845 if (!ret)
846 ret = reg_write(client, RJ54N1_RATIO_O,
847 rj54n1->clk_div.ratio_o);
848
849 /* Enable OCLK */
850 if (!ret)
851 ret = reg_write(client, RJ54N1_OCLK_SEL_EN, 1);
852
853 /* Use PLL for Timing Generator, write 2 to reserved bits */
854 if (!ret)
855 ret = reg_write(client, RJ54N1_TG_BYPASS, 2);
856
857 /* Take sensor out of reset */
858 if (!ret)
859 ret = reg_write(client, RJ54N1_RESET_STANDBY,
860 E_EXCLK | SEN_RSTX);
861 /* Enable PLL */
862 if (!ret)
863 ret = reg_write(client, RJ54N1_PLL_EN, 1);
864
865 /* Wait for PLL to stabilise */
866 msleep(10);
867
868 /* Enable clock to frequency divider */
869 if (!ret)
870 ret = reg_write(client, RJ54N1_CLK_RST, 1);
871
872 if (!ret)
873 ret = reg_read(client, RJ54N1_CLK_RST);
874 if (ret != 1) {
875 dev_err(&client->dev,
876 "Resetting RJ54N1CB0C clock failed: %d!\n", ret);
877 return -EIO;
878 }
a6b5f200 879
8f37cf25
GL		 880 /* Start the PLL */
881 ret = reg_set(client, RJ54N1_OCLK_DSP, 1, 1);
882
883 /* Enable OCLK */
884 if (!ret)
885 ret = reg_write(client, RJ54N1_OCLK_SEL_EN, 1);
886
887 return ret;
888}
889
890static int rj54n1_reg_init(struct i2c_client *client)
891{
a6b5f200 892 struct rj54n1 *rj54n1 = to_rj54n1(client);
8f37cf25
GL		 893 int ret = rj54n1_set_clock(client);
894
895 if (!ret)
896 ret = reg_write_multiple(client, bank_7, ARRAY_SIZE(bank_7));
897 if (!ret)
898 ret = reg_write_multiple(client, bank_10, ARRAY_SIZE(bank_10));
899
900 /* Set binning divisors */
901 if (!ret)
902 ret = reg_write(client, RJ54N1_SCALE_1_2_LEV, 3 | (7 << 4));
903 if (!ret)
904 ret = reg_write(client, RJ54N1_SCALE_4_LEV, 0xf);
905
906 /* Switch to fixed resize mode */
907 if (!ret)
908 ret = reg_write(client, RJ54N1_RESIZE_CONTROL,
909 RESIZE_HOLD_SEL | 1);
910
911 /* Set gain */
912 if (!ret)
913 ret = reg_write(client, RJ54N1_Y_GAIN, 0x84);
914
a6b5f200
GL		 915 /*
916 * Mirror the image back: default is upside down and left-to-right...
917 * Set manual preview / still shot switching
918 */
8f37cf25 919 if (!ret)
a6b5f200 920 ret = reg_write(client, RJ54N1_MIRROR_STILL_MODE, 0x27);
8f37cf25
GL		 921
922 if (!ret)
923 ret = reg_write_multiple(client, bank_4, ARRAY_SIZE(bank_4));
a6b5f200
GL		 924
925 /* Auto exposure area */
926 if (!ret)
927 ret = reg_write(client, RJ54N1_EXPOSURE_CONTROL, 0x80);
928 /* Check current auto WB config */
8f37cf25 929 if (!ret)
a6b5f200
GL		 930 ret = reg_read(client, RJ54N1_WB_SEL_WEIGHT_I);
931 if (ret >= 0) {
932 rj54n1->auto_wb = ret & 0x80;
8f37cf25 933 ret = reg_write_multiple(client, bank_5, ARRAY_SIZE(bank_5));
a6b5f200 934 }
8f37cf25
GL		 935 if (!ret)
936 ret = reg_write_multiple(client, bank_8, ARRAY_SIZE(bank_8));
937
938 if (!ret)
939 ret = reg_write(client, RJ54N1_RESET_STANDBY,
940 E_EXCLK | DSP_RSTX | SEN_RSTX);
941
942 /* Commit init */
943 if (!ret)
944 ret = rj54n1_commit(client);
945
946 /* Take DSP, TG, sensor out of reset */
947 if (!ret)
948 ret = reg_write(client, RJ54N1_RESET_STANDBY,
949 E_EXCLK | DSP_RSTX | TG_RSTX | SEN_RSTX);
950
a6b5f200 951 /* Start register update? Same register as 0x?FE in many bank_* sets */
8f37cf25 952 if (!ret)
a6b5f200 953 ret = reg_write(client, RJ54N1_FWFLG, 2);
8f37cf25
GL		 954
955 /* Constant taken from manufacturer's example */
956 msleep(700);
957
958 return ret;
959}
960
760697be
GL		 961static int rj54n1_try_fmt(struct v4l2_subdev *sd,
962 struct v4l2_mbus_framefmt *mf)
8f37cf25 963{
c4ce6d14 964 struct i2c_client *client = v4l2_get_subdevdata(sd);
760697be
GL		 965 struct rj54n1 *rj54n1 = to_rj54n1(client);
966 const struct rj54n1_datafmt *fmt;
967 int align = mf->code == V4L2_MBUS_FMT_SBGGR10_1X10 ||
968 mf->code == V4L2_MBUS_FMT_SBGGR10_2X8_PADHI_BE ||
969 mf->code == V4L2_MBUS_FMT_SBGGR10_2X8_PADLO_BE ||
970 mf->code == V4L2_MBUS_FMT_SBGGR10_2X8_PADHI_LE ||
971 mf->code == V4L2_MBUS_FMT_SBGGR10_2X8_PADLO_LE;
972
973 dev_dbg(&client->dev, "%s: code = %d, width = %u, height = %u\n",
974 __func__, mf->code, mf->width, mf->height);
975
976 fmt = rj54n1_find_datafmt(mf->code, rj54n1_colour_fmts,
977 ARRAY_SIZE(rj54n1_colour_fmts));
978 if (!fmt) {
979 fmt = rj54n1->fmt;
980 mf->code = fmt->code;
981 }
8f37cf25 982
760697be
GL		 983 mf->field = V4L2_FIELD_NONE;
984 mf->colorspace = fmt->colorspace;
8f37cf25 985
760697be
GL		 986 v4l_bound_align_image(&mf->width, 112, RJ54N1_MAX_WIDTH, align,
987 &mf->height, 84, RJ54N1_MAX_HEIGHT, align, 0);
8f37cf25
GL		 988
989 return 0;
990}
991
760697be
GL		 992static int rj54n1_s_fmt(struct v4l2_subdev *sd,
993 struct v4l2_mbus_framefmt *mf)
8f37cf25 994{
c4ce6d14 995 struct i2c_client *client = v4l2_get_subdevdata(sd);
8f37cf25 996 struct rj54n1 *rj54n1 = to_rj54n1(client);
760697be 997 const struct rj54n1_datafmt *fmt;
e26b3144 998 int output_w, output_h, max_w, max_h,
8f37cf25
GL		 999 input_w = rj54n1->rect.width, input_h = rj54n1->rect.height;
1000 int ret;
1001
1002 /*
1003 * The host driver can call us without .try_fmt(), so, we have to take
1004 * care ourseleves
1005 */
a6b5f200 1006 rj54n1_try_fmt(sd, mf);
8f37cf25
GL		 1007
1008 /*
1009 * Verify if the sensor has just been powered on. TODO: replace this
1010 * with proper PM, when a suitable API is available.
1011 */
a6b5f200 1012 ret = reg_read(client, RJ54N1_RESET_STANDBY);
8f37cf25
GL		 1013 if (ret < 0)
1014 return ret;
1015
1016 if (!(ret & E_EXCLK)) {
1017 ret = rj54n1_reg_init(client);
1018 if (ret < 0)
1019 return ret;
1020 }
1021
a6b5f200
GL		 1022 dev_dbg(&client->dev, "%s: code = %d, width = %u, height = %u\n",
1023 __func__, mf->code, mf->width, mf->height);
1024
8f37cf25 1025 /* RA_SEL_UL is only relevant for raw modes, ignored otherwise. */
760697be 1026 switch (mf->code) {
ace6e979 1027 case V4L2_MBUS_FMT_YUYV8_2X8:
8f37cf25
GL		 1028 ret = reg_write(client, RJ54N1_OUT_SEL, 0);
1029 if (!ret)
1030 ret = reg_set(client, RJ54N1_BYTE_SWAP, 8, 8);
1031 break;
ace6e979 1032 case V4L2_MBUS_FMT_YVYU8_2X8:
760697be
GL		 1033 ret = reg_write(client, RJ54N1_OUT_SEL, 0);
1034 if (!ret)
1035 ret = reg_set(client, RJ54N1_BYTE_SWAP, 0, 8);
1036 break;
1037 case V4L2_MBUS_FMT_RGB565_2X8_LE:
8f37cf25
GL		 1038 ret = reg_write(client, RJ54N1_OUT_SEL, 0x11);
1039 if (!ret)
1040 ret = reg_set(client, RJ54N1_BYTE_SWAP, 8, 8);
1041 break;
760697be
GL		 1042 case V4L2_MBUS_FMT_RGB565_2X8_BE:
1043 ret = reg_write(client, RJ54N1_OUT_SEL, 0x11);
1044 if (!ret)
1045 ret = reg_set(client, RJ54N1_BYTE_SWAP, 0, 8);
1046 break;
1047 case V4L2_MBUS_FMT_SBGGR10_2X8_PADLO_LE:
1048 ret = reg_write(client, RJ54N1_OUT_SEL, 4);
1049 if (!ret)
1050 ret = reg_set(client, RJ54N1_BYTE_SWAP, 8, 8);
1051 if (!ret)
1052 ret = reg_write(client, RJ54N1_RA_SEL_UL, 0);
1053 break;
1054 case V4L2_MBUS_FMT_SBGGR10_2X8_PADHI_LE:
1055 ret = reg_write(client, RJ54N1_OUT_SEL, 4);
1056 if (!ret)
1057 ret = reg_set(client, RJ54N1_BYTE_SWAP, 8, 8);
1058 if (!ret)
1059 ret = reg_write(client, RJ54N1_RA_SEL_UL, 8);
1060 break;
1061 case V4L2_MBUS_FMT_SBGGR10_2X8_PADLO_BE:
1062 ret = reg_write(client, RJ54N1_OUT_SEL, 4);
1063 if (!ret)
1064 ret = reg_set(client, RJ54N1_BYTE_SWAP, 0, 8);
1065 if (!ret)
1066 ret = reg_write(client, RJ54N1_RA_SEL_UL, 0);
1067 break;
1068 case V4L2_MBUS_FMT_SBGGR10_2X8_PADHI_BE:
1069 ret = reg_write(client, RJ54N1_OUT_SEL, 4);
1070 if (!ret)
1071 ret = reg_set(client, RJ54N1_BYTE_SWAP, 0, 8);
1072 if (!ret)
1073 ret = reg_write(client, RJ54N1_RA_SEL_UL, 8);
1074 break;
1075 case V4L2_MBUS_FMT_SBGGR10_1X10:
1076 ret = reg_write(client, RJ54N1_OUT_SEL, 5);
1077 break;
8f37cf25
GL		 1078 default:
1079 ret = -EINVAL;
1080 }
1081
760697be
GL		 1082 /* Special case: a raw mode with 10 bits of data per clock tick */
1083 if (!ret)
1084 ret = reg_set(client, RJ54N1_OCLK_SEL_EN,
1085 (mf->code == V4L2_MBUS_FMT_SBGGR10_1X10) << 1, 2);
1086
8f37cf25
GL		 1087 if (ret < 0)
1088 return ret;
1089
760697be
GL		 1090 /* Supported scales 1:1 >= scale > 1:16 */
1091 max_w = mf->width * (16 * 1024 - 1) / 1024;
1092 if (input_w > max_w)
1093 input_w = max_w;
1094 max_h = mf->height * (16 * 1024 - 1) / 1024;
1095 if (input_h > max_h)
1096 input_h = max_h;
8f37cf25 1097
760697be
GL		 1098 output_w = mf->width;
1099 output_h = mf->height;
8f37cf25
GL		 1100
1101 ret = rj54n1_sensor_scale(sd, &input_w, &input_h, &output_w, &output_h);
1102 if (ret < 0)
1103 return ret;
1104
760697be
GL		 1105 fmt = rj54n1_find_datafmt(mf->code, rj54n1_colour_fmts,
1106 ARRAY_SIZE(rj54n1_colour_fmts));
1107
1108 rj54n1->fmt = fmt;
8f37cf25
GL		 1109 rj54n1->resize = ret;
1110 rj54n1->rect.width = input_w;
1111 rj54n1->rect.height = input_h;
1112 rj54n1->width = output_w;
1113 rj54n1->height = output_h;
1114
760697be
GL		 1115 mf->width = output_w;
1116 mf->height = output_h;
1117 mf->field = V4L2_FIELD_NONE;
1118 mf->colorspace = fmt->colorspace;
8f37cf25 1119
760697be 1120 return 0;
8f37cf25
GL		 1121}
1122
1123static int rj54n1_g_chip_ident(struct v4l2_subdev *sd,
1124 struct v4l2_dbg_chip_ident *id)
1125{
c4ce6d14 1126 struct i2c_client *client = v4l2_get_subdevdata(sd);
8f37cf25
GL		 1127
1128 if (id->match.type != V4L2_CHIP_MATCH_I2C_ADDR)
1129 return -EINVAL;
1130
1131 if (id->match.addr != client->addr)
1132 return -ENODEV;
1133
1134 id->ident = V4L2_IDENT_RJ54N1CB0C;
1135 id->revision = 0;
1136
1137 return 0;
1138}
1139
1140#ifdef CONFIG_VIDEO_ADV_DEBUG
1141static int rj54n1_g_register(struct v4l2_subdev *sd,
1142 struct v4l2_dbg_register *reg)
1143{
c4ce6d14 1144 struct i2c_client *client = v4l2_get_subdevdata(sd);
8f37cf25
GL		 1145
1146 if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR ||
1147 reg->reg < 0x400 || reg->reg > 0x1fff)
1148 /* Registers > 0x0800 are only available from Sharp support */
1149 return -EINVAL;
1150
1151 if (reg->match.addr != client->addr)
1152 return -ENODEV;
1153
1154 reg->size = 1;
1155 reg->val = reg_read(client, reg->reg);
1156
1157 if (reg->val > 0xff)
1158 return -EIO;
1159
1160 return 0;
1161}
1162
1163static int rj54n1_s_register(struct v4l2_subdev *sd,
1164 struct v4l2_dbg_register *reg)
1165{
c4ce6d14 1166 struct i2c_client *client = v4l2_get_subdevdata(sd);
8f37cf25
GL		 1167
1168 if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR ||
1169 reg->reg < 0x400 || reg->reg > 0x1fff)
1170 /* Registers >= 0x0800 are only available from Sharp support */
1171 return -EINVAL;
1172
1173 if (reg->match.addr != client->addr)
1174 return -ENODEV;
1175
1176 if (reg_write(client, reg->reg, reg->val) < 0)
1177 return -EIO;
1178
1179 return 0;
1180}
1181#endif
1182
4ec10bac
LP		 1183static int rj54n1_s_power(struct v4l2_subdev *sd, int on)
1184{
1185 struct i2c_client *client = v4l2_get_subdevdata(sd);
1186 struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
1187
1188 return soc_camera_set_power(&client->dev, icl, on);
1189}
1190
25e965ad 1191static int rj54n1_s_ctrl(struct v4l2_ctrl *ctrl)
8f37cf25 1192{
25e965ad
HV		 1193 struct rj54n1 *rj54n1 = container_of(ctrl->handler, struct rj54n1, hdl);
1194 struct v4l2_subdev *sd = &rj54n1->subdev;
c4ce6d14 1195 struct i2c_client *client = v4l2_get_subdevdata(sd);
8f37cf25
GL		 1196 int data;
1197
1198 switch (ctrl->id) {
1199 case V4L2_CID_VFLIP:
25e965ad 1200 if (ctrl->val)
8f37cf25
GL		 1201 data = reg_set(client, RJ54N1_MIRROR_STILL_MODE, 0, 1);
1202 else
1203 data = reg_set(client, RJ54N1_MIRROR_STILL_MODE, 1, 1);
1204 if (data < 0)
1205 return -EIO;
25e965ad 1206 return 0;
8f37cf25 1207 case V4L2_CID_HFLIP:
25e965ad 1208 if (ctrl->val)
8f37cf25
GL		 1209 data = reg_set(client, RJ54N1_MIRROR_STILL_MODE, 0, 2);
1210 else
1211 data = reg_set(client, RJ54N1_MIRROR_STILL_MODE, 2, 2);
1212 if (data < 0)
1213 return -EIO;
25e965ad 1214 return 0;
8f37cf25 1215 case V4L2_CID_GAIN:
25e965ad 1216 if (reg_write(client, RJ54N1_Y_GAIN, ctrl->val * 2) < 0)
8f37cf25 1217 return -EIO;
25e965ad 1218 return 0;
a6b5f200
GL		 1219 case V4L2_CID_AUTO_WHITE_BALANCE:
1220 /* Auto WB area - whole image */
25e965ad 1221 if (reg_set(client, RJ54N1_WB_SEL_WEIGHT_I, ctrl->val << 7,
a6b5f200
GL		 1222 0x80) < 0)
1223 return -EIO;
25e965ad
HV		 1224 rj54n1->auto_wb = ctrl->val;
1225 return 0;
8f37cf25
GL		 1226 }
1227
25e965ad 1228 return -EINVAL;
8f37cf25
GL		 1229}
1230
25e965ad
HV		 1231static const struct v4l2_ctrl_ops rj54n1_ctrl_ops = {
1232 .s_ctrl = rj54n1_s_ctrl,
1233};
1234
8f37cf25 1235static struct v4l2_subdev_core_ops rj54n1_subdev_core_ops = {
8f37cf25
GL		 1236 .g_chip_ident = rj54n1_g_chip_ident,
1237#ifdef CONFIG_VIDEO_ADV_DEBUG
1238 .g_register = rj54n1_g_register,
1239 .s_register = rj54n1_s_register,
1240#endif
4ec10bac 1241 .s_power = rj54n1_s_power,
8f37cf25
GL		 1242};
1243
bc1a1f3a
GL		 1244static int rj54n1_g_mbus_config(struct v4l2_subdev *sd,
1245 struct v4l2_mbus_config *cfg)
1246{
1247 struct i2c_client *client = v4l2_get_subdevdata(sd);
14178aa5 1248 struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
bc1a1f3a
GL		 1249
1250 cfg->flags =
1251 V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_PCLK_SAMPLE_FALLING |
1252 V4L2_MBUS_MASTER | V4L2_MBUS_DATA_ACTIVE_HIGH |
1253 V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_HIGH;
1254 cfg->type = V4L2_MBUS_PARALLEL;
1255 cfg->flags = soc_camera_apply_board_flags(icl, cfg);
1256
1257 return 0;
1258}
1259
1260static int rj54n1_s_mbus_config(struct v4l2_subdev *sd,
1261 const struct v4l2_mbus_config *cfg)
1262{
1263 struct i2c_client *client = v4l2_get_subdevdata(sd);
14178aa5 1264 struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
bc1a1f3a
GL		 1265
1266 /* Figures 2.5-1 to 2.5-3 - default falling pixclk edge */
1267 if (soc_camera_apply_board_flags(icl, cfg) &
1268 V4L2_MBUS_PCLK_SAMPLE_RISING)
1269 return reg_write(client, RJ54N1_OUT_SIGPO, 1 << 4);
1270 else
1271 return reg_write(client, RJ54N1_OUT_SIGPO, 0);
1272}
1273
8f37cf25
GL		 1274static struct v4l2_subdev_video_ops rj54n1_subdev_video_ops = {
1275 .s_stream = rj54n1_s_stream,
760697be
GL		 1276 .s_mbus_fmt = rj54n1_s_fmt,
1277 .g_mbus_fmt = rj54n1_g_fmt,
1278 .try_mbus_fmt = rj54n1_try_fmt,
1279 .enum_mbus_fmt = rj54n1_enum_fmt,
8f37cf25 1280 .g_crop = rj54n1_g_crop,
a6b5f200 1281 .s_crop = rj54n1_s_crop,
8f37cf25 1282 .cropcap = rj54n1_cropcap,
bc1a1f3a
GL		 1283 .g_mbus_config = rj54n1_g_mbus_config,
1284 .s_mbus_config = rj54n1_s_mbus_config,
8f37cf25
GL		 1285};
1286
1287static struct v4l2_subdev_ops rj54n1_subdev_ops = {
1288 .core = &rj54n1_subdev_core_ops,
1289 .video = &rj54n1_subdev_video_ops,
1290};
1291
8f37cf25
GL		 1292/*
1293 * Interface active, can use i2c. If it fails, it can indeed mean, that
1294 * this wasn't our capture interface, so, we wait for the right one
1295 */
14178aa5 1296static int rj54n1_video_probe(struct i2c_client *client,
a6b5f200 1297 struct rj54n1_pdata *priv)
8f37cf25 1298{
4bbc6d52 1299 struct rj54n1 *rj54n1 = to_rj54n1(client);
8f37cf25
GL		 1300 int data1, data2;
1301 int ret;
1302
4bbc6d52
LP		 1303 ret = rj54n1_s_power(&rj54n1->subdev, 1);
1304 if (ret < 0)
1305 return ret;
1306
8f37cf25
GL		 1307 /* Read out the chip version register */
1308 data1 = reg_read(client, RJ54N1_DEV_CODE);
1309 data2 = reg_read(client, RJ54N1_DEV_CODE2);
1310
1311 if (data1 != 0x51 || data2 != 0x10) {
1312 ret = -ENODEV;
1313 dev_info(&client->dev, "No RJ54N1CB0C found, read 0x%x:0x%x\n",
1314 data1, data2);
4bbc6d52 1315 goto done;
8f37cf25
GL		 1316 }
1317
a6b5f200
GL		 1318 /* Configure IOCTL polarity from the platform data: 0 or 1 << 7. */
1319 ret = reg_write(client, RJ54N1_IOC, priv->ioctl_high << 7);
8f37cf25 1320 if (ret < 0)
4bbc6d52 1321 goto done;
8f37cf25
GL		 1322
1323 dev_info(&client->dev, "Detected a RJ54N1CB0C chip ID 0x%x:0x%x\n",
1324 data1, data2);
1325
4bbc6d52
LP		 1326 ret = v4l2_ctrl_handler_setup(&rj54n1->hdl);
1327
1328done:
1329 rj54n1_s_power(&rj54n1->subdev, 0);
8f37cf25
GL		 1330 return ret;
1331}
1332
1333static int rj54n1_probe(struct i2c_client *client,
1334 const struct i2c_device_id *did)
1335{
1336 struct rj54n1 *rj54n1;
14178aa5 1337 struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
8f37cf25 1338 struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
a6b5f200 1339 struct rj54n1_pdata *rj54n1_priv;
8f37cf25
GL		 1340 int ret;
1341
a6b5f200 1342 if (!icl || !icl->priv) {
8f37cf25
GL		 1343 dev_err(&client->dev, "RJ54N1CB0C: missing platform data!\n");
1344 return -EINVAL;
1345 }
1346
a6b5f200
GL		 1347 rj54n1_priv = icl->priv;
1348
8f37cf25
GL		 1349 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
1350 dev_warn(&adapter->dev,
1351 "I2C-Adapter doesn't support I2C_FUNC_SMBUS_BYTE\n");
1352 return -EIO;
1353 }
1354
1355 rj54n1 = kzalloc(sizeof(struct rj54n1), GFP_KERNEL);
1356 if (!rj54n1)
1357 return -ENOMEM;
1358
1359 v4l2_i2c_subdev_init(&rj54n1->subdev, client, &rj54n1_subdev_ops);
25e965ad
HV		 1360 v4l2_ctrl_handler_init(&rj54n1->hdl, 4);
1361 v4l2_ctrl_new_std(&rj54n1->hdl, &rj54n1_ctrl_ops,
1362 V4L2_CID_VFLIP, 0, 1, 1, 0);
1363 v4l2_ctrl_new_std(&rj54n1->hdl, &rj54n1_ctrl_ops,
1364 V4L2_CID_HFLIP, 0, 1, 1, 0);
1365 v4l2_ctrl_new_std(&rj54n1->hdl, &rj54n1_ctrl_ops,
1366 V4L2_CID_GAIN, 0, 127, 1, 66);
1367 v4l2_ctrl_new_std(&rj54n1->hdl, &rj54n1_ctrl_ops,
1368 V4L2_CID_AUTO_WHITE_BALANCE, 0, 1, 1, 1);
1369 rj54n1->subdev.ctrl_handler = &rj54n1->hdl;
1370 if (rj54n1->hdl.error) {
1371 int err = rj54n1->hdl.error;
8f37cf25 1372
25e965ad
HV		 1373 kfree(rj54n1);
1374 return err;
1375 }
8f37cf25
GL		 1376
1377 rj54n1->clk_div = clk_div;
1378 rj54n1->rect.left = RJ54N1_COLUMN_SKIP;
1379 rj54n1->rect.top = RJ54N1_ROW_SKIP;
1380 rj54n1->rect.width = RJ54N1_MAX_WIDTH;
1381 rj54n1->rect.height = RJ54N1_MAX_HEIGHT;
1382 rj54n1->width = RJ54N1_MAX_WIDTH;
1383 rj54n1->height = RJ54N1_MAX_HEIGHT;
760697be 1384 rj54n1->fmt = &rj54n1_colour_fmts[0];
8f37cf25 1385 rj54n1->resize = 1024;
a6b5f200
GL		 1386 rj54n1->tgclk_mhz = (rj54n1_priv->mclk_freq / PLL_L * PLL_N) /
1387 (clk_div.ratio_tg + 1) / (clk_div.ratio_t + 1);
8f37cf25 1388
14178aa5 1389 ret = rj54n1_video_probe(client, rj54n1_priv);
8f37cf25 1390 if (ret < 0) {
25e965ad 1391 v4l2_ctrl_handler_free(&rj54n1->hdl);
8f37cf25 1392 kfree(rj54n1);
8f37cf25 1393 }
4bbc6d52
LP		 1394
1395 return ret;
8f37cf25
GL		 1396}
1397
1398static int rj54n1_remove(struct i2c_client *client)
1399{
1400 struct rj54n1 *rj54n1 = to_rj54n1(client);
14178aa5 1401 struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
8f37cf25 1402
25e965ad 1403 v4l2_device_unregister_subdev(&rj54n1->subdev);
8f37cf25
GL		 1404 if (icl->free_bus)
1405 icl->free_bus(icl);
25e965ad 1406 v4l2_ctrl_handler_free(&rj54n1->hdl);
8f37cf25
GL		 1407 kfree(rj54n1);
1408
1409 return 0;
1410}
1411
1412static const struct i2c_device_id rj54n1_id[] = {
1413 { "rj54n1cb0c", 0 },
1414 { }
1415};
1416MODULE_DEVICE_TABLE(i2c, rj54n1_id);
1417
1418static struct i2c_driver rj54n1_i2c_driver = {
1419 .driver = {
1420 .name = "rj54n1cb0c",
1421 },
1422 .probe = rj54n1_probe,
1423 .remove = rj54n1_remove,
1424 .id_table = rj54n1_id,
1425};
1426
c6e8d86f 1427module_i2c_driver(rj54n1_i2c_driver);
8f37cf25
GL		 1428
1429MODULE_DESCRIPTION("Sharp RJ54N1CB0C Camera driver");
1430MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>");
1431MODULE_LICENSE("GPL v2");
Linux kernel - Deliverables
This page took 0.342084 seconds and 5 git commands to generate.