[deliverable/linux.git] / drivers / media / radio / Kconfig

#
# Multimedia Video device configuration
#

menuconfig RADIO_ADAPTERS
	bool "Radio Adapters"
	depends on VIDEO_V4L2
	default y
	---help---
	  Say Y here to enable selecting AM/FM radio adapters.

if RADIO_ADAPTERS && VIDEO_V4L2

config RADIO_SI470X
	bool "Silicon Labs Si470x FM Radio Receiver support"
	depends on VIDEO_V4L2

source "drivers/media/radio/si470x/Kconfig"

config USB_MR800
	tristate "AverMedia MR 800 USB FM radio support"
	depends on USB && VIDEO_V4L2
	---help---
	  Say Y here if you want to connect this type of radio to your
	  computer's USB port. Note that the audio is not digital, and
	  you must connect the line out connector to a sound card or a
	  set of speakers.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-mr800.

config USB_DSBR
	tristate "D-Link/GemTek USB FM radio support"
	depends on USB && VIDEO_V4L2
	---help---
	  Say Y here if you want to connect this type of radio to your
	  computer's USB port. Note that the audio is not digital, and
	  you must connect the line out connector to a sound card or a
	  set of speakers.

	  To compile this driver as a module, choose M here: the
	  module will be called dsbr100.

config RADIO_MAXIRADIO
	tristate "Guillemot MAXI Radio FM 2000 radio"
	depends on VIDEO_V4L2 && PCI
	---help---
	  Choose Y here if you have this radio card.  This card may also be
	  found as Gemtek PCI FM.

	  In order to control your radio card, you will need to use programs
	  that are compatible with the Video For Linux API.  Information on
	  this API and pointers to "v4l" programs may be found at
	  <file:Documentation/video4linux/API.html>.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-maxiradio.


config I2C_SI4713
	tristate "I2C driver for Silicon Labs Si4713 device"
	depends on I2C && VIDEO_V4L2
	---help---
	  Say Y here if you want support to Si4713 I2C device.
	  This device driver supports only i2c bus.

	  To compile this driver as a module, choose M here: the
	  module will be called si4713.

config RADIO_SI4713
	tristate "Silicon Labs Si4713 FM Radio Transmitter support"
	depends on I2C && VIDEO_V4L2
	select I2C_SI4713
	---help---
	  Say Y here if you want support to Si4713 FM Radio Transmitter.
	  This device can transmit audio through FM. It can transmit
	  RDS and RBDS signals as well. This module is the v4l2 radio
	  interface for the i2c driver of this device.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-si4713.

config USB_KEENE
	tristate "Keene FM Transmitter USB support"
	depends on USB && VIDEO_V4L2
	---help---
	  Say Y here if you want to connect this type of FM transmitter
	  to your computer's USB port.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-keene.

config RADIO_TEA5764
	tristate "TEA5764 I2C FM radio support"
	depends on I2C && VIDEO_V4L2
	---help---
	  Say Y here if you want to use the TEA5764 FM chip found in
	  EZX phones. This FM chip is present in EZX phones from Motorola,
	  connected to internal pxa I2C bus.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-tea5764.

config RADIO_TEA5764_XTAL
	bool "TEA5764 crystal reference"
	depends on RADIO_TEA5764=y
	default y
	help
	  Say Y here if TEA5764 have a 32768 Hz crystal in circuit, say N
	  here if TEA5764 reference frequency is connected in FREQIN.

config RADIO_SAA7706H
	tristate "SAA7706H Car Radio DSP"
	depends on I2C && VIDEO_V4L2
	---help---
	  Say Y here if you want to use the SAA7706H Car radio Digital
	  Signal Processor, found for instance on the Russellville development
	  board. On the russellville the device is connected to internal
	  timberdale I2C bus.

	  To compile this driver as a module, choose M here: the
	  module will be called SAA7706H.

config RADIO_TEF6862
	tristate "TEF6862 Car Radio Enhanced Selectivity Tuner"
	depends on I2C && VIDEO_V4L2
	---help---
	  Say Y here if you want to use the TEF6862 Car Radio Enhanced
	  Selectivity Tuner, found for instance on the Russellville development
	  board. On the russellville the device is connected to internal
	  timberdale I2C bus.

	  To compile this driver as a module, choose M here: the
	  module will be called TEF6862.

config RADIO_TIMBERDALE
	tristate "Enable the Timberdale radio driver"
	depends on MFD_TIMBERDALE && VIDEO_V4L2
	depends on I2C	# for RADIO_SAA7706H
	select RADIO_TEF6862
	select RADIO_SAA7706H
	---help---
	  This is a kind of umbrella driver for the Radio Tuner and DSP
	  found behind the Timberdale FPGA on the Russellville board.
	  Enabling this driver will automatically select the DSP and tuner.

config RADIO_WL1273
	tristate "Texas Instruments WL1273 I2C FM Radio"
	depends on I2C && VIDEO_V4L2
	select MFD_CORE
	select MFD_WL1273_CORE
	select FW_LOADER
	---help---
	  Choose Y here if you have this FM radio chip.

	  In order to control your radio card, you will need to use programs
	  that are compatible with the Video For Linux 2 API.  Information on
	  this API and pointers to "v4l2" programs may be found at
	  <file:Documentation/video4linux/API.html>.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-wl1273.

# TI's ST based wl128x FM radio
source "drivers/media/radio/wl128x/Kconfig"

#
# ISA drivers configuration
#

menuconfig V4L_RADIO_ISA_DRIVERS
	bool "ISA radio devices"
	depends on ISA
	default n
	---help---
	  Say Y here to enable support for these ISA drivers.

if V4L_RADIO_ISA_DRIVERS

config RADIO_ISA
	depends on ISA
	tristate

config RADIO_CADET
	tristate "ADS Cadet AM/FM Tuner"
	depends on ISA && VIDEO_V4L2
	---help---
	  Choose Y here if you have one of these AM/FM radio cards, and then
	  fill in the port address below.

	  In order to control your radio card, you will need to use programs
	  that are compatible with the Video For Linux API.  Information on
	  this API and pointers to "v4l" programs may be found at
	  <file:Documentation/video4linux/API.html>.

	  Further documentation on this driver can be found on the WWW at
	  <http://linux.blackhawke.net/cadet/>.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-cadet.

config RADIO_RTRACK
	tristate "AIMSlab RadioTrack (aka RadioReveal) support"
	depends on ISA && VIDEO_V4L2
	select RADIO_ISA
	---help---
	  Choose Y here if you have one of these FM radio cards, and then fill
	  in the port address below.

	  Note that newer AIMSlab RadioTrack cards have a different chipset
	  and are not supported by this driver.  For these cards, use the
	  RadioTrack II driver below.

	  If you have a GemTeks combined (PnP) sound- and radio card you must
	  use this driver as a module and setup the card with isapnptools.
	  You must also pass the module a suitable io parameter, 0x248 has
	  been reported to be used by these cards.

	  More information is contained in the file
	  <file:Documentation/video4linux/radiotrack.txt>.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-aimslab.

config RADIO_RTRACK_PORT
	hex "RadioTrack i/o port (0x20f or 0x30f)"
	depends on RADIO_RTRACK=y
	default "30f"
	help
	  Enter either 0x30f or 0x20f here.  The card default is 0x30f, if you
	  haven't changed the jumper setting on the card.

config RADIO_RTRACK2
	tristate "AIMSlab RadioTrack II support"
	depends on ISA && VIDEO_V4L2
	select RADIO_ISA
	---help---
	  Choose Y here if you have this FM radio card, and then fill in the
	  port address below.

	  Note: this driver hasn't been tested since a long time due to lack
	  of hardware. If you have this hardware, then please contact the
	  linux-media mailinglist.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-rtrack2.

config RADIO_RTRACK2_PORT
	hex "RadioTrack II i/o port (0x20c or 0x30c)"
	depends on RADIO_RTRACK2=y
	default "30c"
	help
	  Enter either 0x30c or 0x20c here.  The card default is 0x30c, if you
	  haven't changed the jumper setting on the card.

config RADIO_AZTECH
	tristate "Aztech/Packard Bell Radio"
	depends on ISA && VIDEO_V4L2
	select RADIO_ISA
	---help---
	  Choose Y here if you have one of these FM radio cards, and then fill
	  in the port address below.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-aztech.

config RADIO_AZTECH_PORT
	hex "Aztech/Packard Bell I/O port (0x350 or 0x358)"
	depends on RADIO_AZTECH=y
	default "350"
	help
	  Enter either 0x350 or 0x358 here.  The card default is 0x350, if you
	  haven't changed the setting of jumper JP3 on the card.  Removing the
	  jumper sets the card to 0x358.

config RADIO_GEMTEK
	tristate "GemTek Radio card (or compatible) support"
	depends on ISA && VIDEO_V4L2
	select RADIO_ISA
	---help---
	  Choose Y here if you have this FM radio card, and then fill in the
	  I/O port address and settings below. The following cards either have
	  GemTek Radio tuner or are rebranded GemTek Radio cards:

	  - Sound Vision 16 Gold with FM Radio
	  - Typhoon Radio card (some models)
	  - Hama Radio card

	  To compile this driver as a module, choose M here: the
	  module will be called radio-gemtek.

config RADIO_GEMTEK_PORT
	hex "Fixed I/O port (0x20c, 0x30c, 0x24c, 0x34c, 0x248 or 0x28c)"
	depends on RADIO_GEMTEK=y
	default "34c"
	help
	  Enter either 0x20c, 0x30c, 0x24c, 0x34c, 0x248 or 0x28c here. The
	  card default is 0x34c, if you haven't changed the jumper setting
	  on the card.

	  On Sound Vision 16 Gold PnP with FM Radio (ESS1869+FM Gemtek), the I/O
	  port is 0x20c, 0x248 or 0x28c.

	  If automatic I/O port probing is enabled this port will be used only
	  in case of automatic probing failure, ie. as a fallback.

config RADIO_GEMTEK_PROBE
	bool "Automatic I/O port probing"
	depends on RADIO_GEMTEK=y
	default y
	help
	  Say Y here to enable automatic probing for GemTek Radio card. The
	  following ports will be probed: 0x20c, 0x30c, 0x24c, 0x34c, 0x248 and
	  0x28c.

config RADIO_MIROPCM20
	tristate "miroSOUND PCM20 radio"
	depends on ISA && ISA_DMA_API && VIDEO_V4L2 && SND
	select SND_ISA
	select SND_MIRO
	---help---
	  Choose Y here if you have this FM radio card. You also need to enable
	  the ALSA sound system. This choice automatically selects the ALSA
	  sound card driver "Miro miroSOUND PCM1pro/PCM12/PCM20radio" as this
	  is required for the radio-miropcm20.

	  In order to control your radio card, you will need to use programs
	  that are compatible with the Video For Linux API.  Information on
	  this API and pointers to "v4l" programs may be found at
	  <file:Documentation/video4linux/API.html>.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-miropcm20.

config RADIO_SF16FMI
	tristate "SF16-FMI/SF16-FMP Radio"
	depends on ISA && VIDEO_V4L2
	---help---
	  Choose Y here if you have one of these FM radio cards.

	  In order to control your radio card, you will need to use programs
	  that are compatible with the Video For Linux API.  Information on
	  this API and pointers to "v4l" programs may be found at
	  <file:Documentation/video4linux/API.html>.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-sf16fmi.

config RADIO_SF16FMR2
	tristate "SF16FMR2 Radio"
	depends on ISA && VIDEO_V4L2 && SND
	---help---
	  Choose Y here if you have one of these FM radio cards.

	  In order to control your radio card, you will need to use programs
	  that are compatible with the Video For Linux API.  Information on
	  this API and pointers to "v4l" programs may be found on the WWW at
	  <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-sf16fmr2.

config RADIO_TERRATEC
	tristate "TerraTec ActiveRadio ISA Standalone"
	depends on ISA && VIDEO_V4L2
	select RADIO_ISA
	---help---
	  Choose Y here if you have this FM radio card.

	  Note: this driver hasn't been tested since a long time due to lack
	  of hardware. If you have this hardware, then please contact the
	  linux-media mailinglist.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-terratec.

config RADIO_TRUST
	tristate "Trust FM radio card"
	depends on ISA && VIDEO_V4L2
	select RADIO_ISA
	help
	  This is a driver for the Trust FM radio cards. Say Y if you have
	  such a card and want to use it under Linux.

	  Note: this driver hasn't been tested since a long time due to lack
	  of hardware. If you have this hardware, then please contact the
	  linux-media mailinglist.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-trust.

config RADIO_TRUST_PORT
	hex "Trust i/o port (usually 0x350 or 0x358)"
	depends on RADIO_TRUST=y
	default "350"
	help
	  Enter the I/O port of your Trust FM radio card. If unsure, try the
	  values "0x350" or "0x358".

config RADIO_TYPHOON
	tristate "Typhoon Radio (a.k.a. EcoRadio)"
	depends on ISA && VIDEO_V4L2
	---help---
	  Choose Y here if you have one of these FM radio cards, and then fill
	  in the port address and the frequency used for muting below.

	  In order to control your radio card, you will need to use programs
	  that are compatible with the Video For Linux API.  Information on
	  this API and pointers to "v4l" programs may be found at
	  <file:Documentation/video4linux/API.html>.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-typhoon.

config RADIO_TYPHOON_PORT
	hex "Typhoon I/O port (0x316 or 0x336)"
	depends on RADIO_TYPHOON=y
	default "316"
	help
	  Enter the I/O port of your Typhoon or EcoRadio radio card.

config RADIO_TYPHOON_MUTEFREQ
	int "Typhoon frequency set when muting the device (kHz)"
	depends on RADIO_TYPHOON=y
	default "87500"
	help
	  Enter the frequency used for muting the radio. The device is never
	  completely silent. If the volume is just turned down, you can still
	  hear silent voices and music. For that reason, the frequency of the
	  radio device is set to the frequency you can enter here whenever
	  the device is muted. There should be no local radio station at that
	  frequency.

config RADIO_ZOLTRIX
	tristate "Zoltrix Radio"
	depends on ISA && VIDEO_V4L2
	---help---
	  Choose Y here if you have one of these FM radio cards, and then fill
	  in the port address below.

	  In order to control your radio card, you will need to use programs
	  that are compatible with the Video For Linux API.  Information on
	  this API and pointers to "v4l" programs may be found at
	  <file:Documentation/video4linux/API.html>.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-zoltrix.

config RADIO_ZOLTRIX_PORT
	hex "ZOLTRIX I/O port (0x20c or 0x30c)"
	depends on RADIO_ZOLTRIX=y
	default "20c"
	help
	  Enter the I/O port of your Zoltrix radio card.

endif # V4L_RADIO_ISA_DRIVERS

endif # RADIO_ADAPTERS
Commit	Line	Data
1da177e4 LT	1	#
	2	# Multimedia Video device configuration
	3	#
	4
c5da5afb JE	5	menuconfig RADIO_ADAPTERS
c5da5afb JE	6	bool "Radio Adapters"
057596ee	7	depends on VIDEO_V4L2
c5da5afb	8	default y
ff01652c MCC	9	---help---
ff01652c MCC	10	Say Y here to enable selecting AM/FM radio adapters.
c5da5afb	11
057596ee	12	if RADIO_ADAPTERS && VIDEO_V4L2
1da177e4	13
e21d9865 HV	14	config RADIO_SI470X
	15	bool "Silicon Labs Si470x FM Radio Receiver support"
	16	depends on VIDEO_V4L2
	17
	18	source "drivers/media/radio/si470x/Kconfig"
	19
	20	config USB_MR800
	21	tristate "AverMedia MR 800 USB FM radio support"
	22	depends on USB && VIDEO_V4L2
	23	---help---
	24	Say Y here if you want to connect this type of radio to your
	25	computer's USB port. Note that the audio is not digital, and
	26	you must connect the line out connector to a sound card or a
	27	set of speakers.
	28
	29	To compile this driver as a module, choose M here: the
	30	module will be called radio-mr800.
	31
	32	config USB_DSBR
	33	tristate "D-Link/GemTek USB FM radio support"
	34	depends on USB && VIDEO_V4L2
	35	---help---
	36	Say Y here if you want to connect this type of radio to your
	37	computer's USB port. Note that the audio is not digital, and
	38	you must connect the line out connector to a sound card or a
	39	set of speakers.
	40
	41	To compile this driver as a module, choose M here: the
	42	module will be called dsbr100.
	43
	44	config RADIO_MAXIRADIO
	45	tristate "Guillemot MAXI Radio FM 2000 radio"
	46	depends on VIDEO_V4L2 && PCI
	47	---help---
	48	Choose Y here if you have this radio card. This card may also be
	49	found as Gemtek PCI FM.
	50
	51	In order to control your radio card, you will need to use programs
	52	that are compatible with the Video For Linux API. Information on
	53	this API and pointers to "v4l" programs may be found at
	54	<file:Documentation/video4linux/API.html>.
	55
	56	To compile this driver as a module, choose M here: the
	57	module will be called radio-maxiradio.
	58
	59
	60	config I2C_SI4713
	61	tristate "I2C driver for Silicon Labs Si4713 device"
	62	depends on I2C && VIDEO_V4L2
	63	---help---
	64	Say Y here if you want support to Si4713 I2C device.
	65	This device driver supports only i2c bus.
	66
	67	To compile this driver as a module, choose M here: the
	68	module will be called si4713.
	69
	70	config RADIO_SI4713
	71	tristate "Silicon Labs Si4713 FM Radio Transmitter support"
	72	depends on I2C && VIDEO_V4L2
	73	select I2C_SI4713
	74	---help---
	75	Say Y here if you want support to Si4713 FM Radio Transmitter.
	76	This device can transmit audio through FM. It can transmit
	77	RDS and RBDS signals as well. This module is the v4l2 radio
78	interface for the i2c driver of this device.
79
80	To compile this driver as a module, choose M here: the
81	module will be called radio-si4713.
82
1bf20c3a HV	83	config USB_KEENE
	84	tristate "Keene FM Transmitter USB support"
	85	depends on USB && VIDEO_V4L2
	86	---help---
	87	Say Y here if you want to connect this type of FM transmitter
	88	to your computer's USB port.
	89
	90	To compile this driver as a module, choose M here: the
	91	module will be called radio-keene.
	92
e21d9865 HV	93	config RADIO_TEA5764
	94	tristate "TEA5764 I2C FM radio support"
	95	depends on I2C && VIDEO_V4L2
	96	---help---
	97	Say Y here if you want to use the TEA5764 FM chip found in
	98	EZX phones. This FM chip is present in EZX phones from Motorola,
	99	connected to internal pxa I2C bus.
	100
	101	To compile this driver as a module, choose M here: the
	102	module will be called radio-tea5764.
	103
	104	config RADIO_TEA5764_XTAL
	105	bool "TEA5764 crystal reference"
	106	depends on RADIO_TEA5764=y
	107	default y
	108	help
	109	Say Y here if TEA5764 have a 32768 Hz crystal in circuit, say N
	110	here if TEA5764 reference frequency is connected in FREQIN.
	111
	112	config RADIO_SAA7706H
	113	tristate "SAA7706H Car Radio DSP"
	114	depends on I2C && VIDEO_V4L2
	115	---help---
	116	Say Y here if you want to use the SAA7706H Car radio Digital
	117	Signal Processor, found for instance on the Russellville development
	118	board. On the russellville the device is connected to internal
	119	timberdale I2C bus.
	120
	121	To compile this driver as a module, choose M here: the
	122	module will be called SAA7706H.
	123
	124	config RADIO_TEF6862
	125	tristate "TEF6862 Car Radio Enhanced Selectivity Tuner"
	126	depends on I2C && VIDEO_V4L2
	127	---help---
	128	Say Y here if you want to use the TEF6862 Car Radio Enhanced
	129	Selectivity Tuner, found for instance on the Russellville development
	130	board. On the russellville the device is connected to internal
	131	timberdale I2C bus.
	132
	133	To compile this driver as a module, choose M here: the
	134	module will be called TEF6862.
	135
	136	config RADIO_TIMBERDALE
	137	tristate "Enable the Timberdale radio driver"
	138	depends on MFD_TIMBERDALE && VIDEO_V4L2
	139	depends on I2C # for RADIO_SAA7706H
	140	select RADIO_TEF6862
	141	select RADIO_SAA7706H
	142	---help---
	143	This is a kind of umbrella driver for the Radio Tuner and DSP
	144	found behind the Timberdale FPGA on the Russellville board.
	145	Enabling this driver will automatically select the DSP and tuner.
	146
	147	config RADIO_WL1273
	148	tristate "Texas Instruments WL1273 I2C FM Radio"
	149	depends on I2C && VIDEO_V4L2
	150	select MFD_CORE
	151	select MFD_WL1273_CORE
	152	select FW_LOADER
	153	---help---
	154	Choose Y here if you have this FM radio chip.
	155
	156	In order to control your radio card, you will need to use programs
157	that are compatible with the Video For Linux 2 API. Information on
158	this API and pointers to "v4l2" programs may be found at
159	<file:Documentation/video4linux/API.html>.
160
161	To compile this driver as a module, choose M here: the
162	module will be called radio-wl1273.
163
164	# TI's ST based wl128x FM radio
165	source "drivers/media/radio/wl128x/Kconfig"
166
167	#
168	# ISA drivers configuration
169	#
170
171	menuconfig V4L_RADIO_ISA_DRIVERS
172	bool "ISA radio devices"
173	depends on ISA
174	default n
175	---help---
176	Say Y here to enable support for these ISA drivers.
177
178	if V4L_RADIO_ISA_DRIVERS
179
137c579c HV	180	config RADIO_ISA
	181	depends on ISA
	182	tristate
	183
1da177e4 LT	184	config RADIO_CADET
1da177e4 LT	185	tristate "ADS Cadet AM/FM Tuner"
c0c7fa09	186	depends on ISA && VIDEO_V4L2
1da177e4 LT	187	---help---
	188	Choose Y here if you have one of these AM/FM radio cards, and then
	189	fill in the port address below.
	190
	191	In order to control your radio card, you will need to use programs
	192	that are compatible with the Video For Linux API. Information on
	193	this API and pointers to "v4l" programs may be found at
	194	<file:Documentation/video4linux/API.html>.
	195
	196	Further documentation on this driver can be found on the WWW at
	197	<http://linux.blackhawke.net/cadet/>.
	198
	199	To compile this driver as a module, choose M here: the
	200	module will be called radio-cadet.
	201
	202	config RADIO_RTRACK
	203	tristate "AIMSlab RadioTrack (aka RadioReveal) support"
46ff2c72	204	depends on ISA && VIDEO_V4L2
cc3c6df1	205	select RADIO_ISA
1da177e4 LT	206	---help---
	207	Choose Y here if you have one of these FM radio cards, and then fill
	208	in the port address below.
	209
	210	Note that newer AIMSlab RadioTrack cards have a different chipset
	211	and are not supported by this driver. For these cards, use the
	212	RadioTrack II driver below.
	213
	214	If you have a GemTeks combined (PnP) sound- and radio card you must
	215	use this driver as a module and setup the card with isapnptools.
	216	You must also pass the module a suitable io parameter, 0x248 has
	217	been reported to be used by these cards.
	218
cc3c6df1	219	More information is contained in the file
1da177e4 LT	220	<file:Documentation/video4linux/radiotrack.txt>.
	221
	222	To compile this driver as a module, choose M here: the
	223	module will be called radio-aimslab.
	224
	225	config RADIO_RTRACK_PORT
	226	hex "RadioTrack i/o port (0x20f or 0x30f)"
	227	depends on RADIO_RTRACK=y
cc3c6df1	228	default "30f"
1da177e4 LT	229	help
	230	Enter either 0x30f or 0x20f here. The card default is 0x30f, if you
	231	haven't changed the jumper setting on the card.
	232
	233	config RADIO_RTRACK2
	234	tristate "AIMSlab RadioTrack II support"
f8c559f8	235	depends on ISA && VIDEO_V4L2
8bd7ef5a	236	select RADIO_ISA
1da177e4 LT	237	---help---
	238	Choose Y here if you have this FM radio card, and then fill in the
	239	port address below.
	240
8bd7ef5a HV	241	Note: this driver hasn't been tested since a long time due to lack
	242	of hardware. If you have this hardware, then please contact the
	243	linux-media mailinglist.
1da177e4 LT	244
	245	To compile this driver as a module, choose M here: the
	246	module will be called radio-rtrack2.
	247
	248	config RADIO_RTRACK2_PORT
	249	hex "RadioTrack II i/o port (0x20c or 0x30c)"
	250	depends on RADIO_RTRACK2=y
	251	default "30c"
	252	help
	253	Enter either 0x30c or 0x20c here. The card default is 0x30c, if you
	254	haven't changed the jumper setting on the card.
	255
	256	config RADIO_AZTECH
	257	tristate "Aztech/Packard Bell Radio"
a4366af4	258	depends on ISA && VIDEO_V4L2
3088fba8	259	select RADIO_ISA
1da177e4 LT	260	---help---
	261	Choose Y here if you have one of these FM radio cards, and then fill
	262	in the port address below.
	263
1da177e4 LT	264	To compile this driver as a module, choose M here: the
	265	module will be called radio-aztech.
	266
	267	config RADIO_AZTECH_PORT
	268	hex "Aztech/Packard Bell I/O port (0x350 or 0x358)"
	269	depends on RADIO_AZTECH=y
	270	default "350"
	271	help
	272	Enter either 0x350 or 0x358 here. The card default is 0x350, if you
	273	haven't changed the setting of jumper JP3 on the card. Removing the
	274	jumper sets the card to 0x358.
	275
	276	config RADIO_GEMTEK
3e7589c5	277	tristate "GemTek Radio card (or compatible) support"
d1c4ecde	278	depends on ISA && VIDEO_V4L2
f8c08524	279	select RADIO_ISA
1da177e4 LT	280	---help---
1da177e4 LT	281	Choose Y here if you have this FM radio card, and then fill in the
3e7589c5 PS	282	I/O port address and settings below. The following cards either have
	283	GemTek Radio tuner or are rebranded GemTek Radio cards:
	284
	285	- Sound Vision 16 Gold with FM Radio
	286	- Typhoon Radio card (some models)
	287	- Hama Radio card
1da177e4	288
1da177e4 LT	289	To compile this driver as a module, choose M here: the
	290	module will be called radio-gemtek.
	291
	292	config RADIO_GEMTEK_PORT
f8c08524	293	hex "Fixed I/O port (0x20c, 0x30c, 0x24c, 0x34c, 0x248 or 0x28c)"
1da177e4 LT	294	depends on RADIO_GEMTEK=y
	295	default "34c"
	296	help
f8c08524 HV	297	Enter either 0x20c, 0x30c, 0x24c, 0x34c, 0x248 or 0x28c here. The
	298	card default is 0x34c, if you haven't changed the jumper setting
	299	on the card.
	300
	301	On Sound Vision 16 Gold PnP with FM Radio (ESS1869+FM Gemtek), the I/O
3e7589c5	302	port is 0x20c, 0x248 or 0x28c.
f8c08524	303
3e7589c5 PS	304	If automatic I/O port probing is enabled this port will be used only
	305	in case of automatic probing failure, ie. as a fallback.
	306
	307	config RADIO_GEMTEK_PROBE
	308	bool "Automatic I/O port probing"
	309	depends on RADIO_GEMTEK=y
	310	default y
	311	help
	312	Say Y here to enable automatic probing for GemTek Radio card. The
	313	following ports will be probed: 0x20c, 0x30c, 0x24c, 0x34c, 0x248 and
	314	0x28c.
1da177e4	315
8366fc39 KH	316	config RADIO_MIROPCM20
8366fc39 KH	317	tristate "miroSOUND PCM20 radio"
4756fc64	318	depends on ISA && ISA_DMA_API && VIDEO_V4L2 && SND
dd7cdb88	319	select SND_ISA
8366fc39 KH	320	select SND_MIRO
	321	---help---
	322	Choose Y here if you have this FM radio card. You also need to enable
	323	the ALSA sound system. This choice automatically selects the ALSA
	324	sound card driver "Miro miroSOUND PCM1pro/PCM12/PCM20radio" as this
	325	is required for the radio-miropcm20.
	326
	327	In order to control your radio card, you will need to use programs
	328	that are compatible with the Video For Linux API. Information on
	329	this API and pointers to "v4l" programs may be found at
	330	<file:Documentation/video4linux/API.html>.
	331
	332	To compile this driver as a module, choose M here: the
	333	module will be called radio-miropcm20.
1da177e4	334
1da177e4	335	config RADIO_SF16FMI
4b830374	336	tristate "SF16-FMI/SF16-FMP Radio"
a2ef73af	337	depends on ISA && VIDEO_V4L2
1da177e4	338	---help---
67cabf50	339	Choose Y here if you have one of these FM radio cards.
1da177e4 LT	340
	341	In order to control your radio card, you will need to use programs
	342	that are compatible with the Video For Linux API. Information on
	343	this API and pointers to "v4l" programs may be found at
	344	<file:Documentation/video4linux/API.html>.
	345
	346	To compile this driver as a module, choose M here: the
	347	module will be called radio-sf16fmi.
	348
	349	config RADIO_SF16FMR2
	350	tristate "SF16FMR2 Radio"
42a741dc	351	depends on ISA && VIDEO_V4L2 && SND
1da177e4 LT	352	---help---
	353	Choose Y here if you have one of these FM radio cards.
	354
	355	In order to control your radio card, you will need to use programs
	356	that are compatible with the Video For Linux API. Information on
	357	this API and pointers to "v4l" programs may be found on the WWW at
	358	<http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
	359
	360	To compile this driver as a module, choose M here: the
	361	module will be called radio-sf16fmr2.
	362
	363	config RADIO_TERRATEC
	364	tristate "TerraTec ActiveRadio ISA Standalone"
55ac7b69	365	depends on ISA && VIDEO_V4L2
32c51836	366	select RADIO_ISA
1da177e4	367	---help---
32c51836	368	Choose Y here if you have this FM radio card.
1da177e4	369
32c51836 HV	370	Note: this driver hasn't been tested since a long time due to lack
	371	of hardware. If you have this hardware, then please contact the
	372	linux-media mailinglist.
1da177e4 LT	373
	374	To compile this driver as a module, choose M here: the
	375	module will be called radio-terratec.
	376
1da177e4 LT	377	config RADIO_TRUST
1da177e4 LT	378	tristate "Trust FM radio card"
982eddb9	379	depends on ISA && VIDEO_V4L2
1d211f26	380	select RADIO_ISA
1da177e4 LT	381	help
	382	This is a driver for the Trust FM radio cards. Say Y if you have
	383	such a card and want to use it under Linux.
	384
1d211f26 HV	385	Note: this driver hasn't been tested since a long time due to lack
	386	of hardware. If you have this hardware, then please contact the
	387	linux-media mailinglist.
	388
1da177e4 LT	389	To compile this driver as a module, choose M here: the
	390	module will be called radio-trust.
	391
	392	config RADIO_TRUST_PORT
	393	hex "Trust i/o port (usually 0x350 or 0x358)"
	394	depends on RADIO_TRUST=y
	395	default "350"
	396	help
	397	Enter the I/O port of your Trust FM radio card. If unsure, try the
	398	values "0x350" or "0x358".
	399
	400	config RADIO_TYPHOON
	401	tristate "Typhoon Radio (a.k.a. EcoRadio)"
30c48305	402	depends on ISA && VIDEO_V4L2
1da177e4 LT	403	---help---
	404	Choose Y here if you have one of these FM radio cards, and then fill
	405	in the port address and the frequency used for muting below.
	406
	407	In order to control your radio card, you will need to use programs
	408	that are compatible with the Video For Linux API. Information on
	409	this API and pointers to "v4l" programs may be found at
	410	<file:Documentation/video4linux/API.html>.
	411
	412	To compile this driver as a module, choose M here: the
	413	module will be called radio-typhoon.
	414
1da177e4 LT	415	config RADIO_TYPHOON_PORT
	416	hex "Typhoon I/O port (0x316 or 0x336)"
	417	depends on RADIO_TYPHOON=y
	418	default "316"
	419	help
	420	Enter the I/O port of your Typhoon or EcoRadio radio card.
	421
	422	config RADIO_TYPHOON_MUTEFREQ
	423	int "Typhoon frequency set when muting the device (kHz)"
	424	depends on RADIO_TYPHOON=y
	425	default "87500"
	426	help
	427	Enter the frequency used for muting the radio. The device is never
	428	completely silent. If the volume is just turned down, you can still
	429	hear silent voices and music. For that reason, the frequency of the
	430	radio device is set to the frequency you can enter here whenever
	431	the device is muted. There should be no local radio station at that
	432	frequency.
	433
	434	config RADIO_ZOLTRIX
	435	tristate "Zoltrix Radio"
2ab65299	436	depends on ISA && VIDEO_V4L2
1da177e4 LT	437	---help---
	438	Choose Y here if you have one of these FM radio cards, and then fill
	439	in the port address below.
	440
	441	In order to control your radio card, you will need to use programs
	442	that are compatible with the Video For Linux API. Information on
	443	this API and pointers to "v4l" programs may be found at
	444	<file:Documentation/video4linux/API.html>.
	445
	446	To compile this driver as a module, choose M here: the
	447	module will be called radio-zoltrix.
	448
	449	config RADIO_ZOLTRIX_PORT
	450	hex "ZOLTRIX I/O port (0x20c or 0x30c)"
	451	depends on RADIO_ZOLTRIX=y
	452	default "20c"
	453	help
	454	Enter the I/O port of your Zoltrix radio card.
	455
e21d9865	456	endif # V4L_RADIO_ISA_DRIVERS
57f05bfa	457
c5da5afb	458	endif # RADIO_ADAPTERS