[deliverable/linux.git] / drivers / media / radio / Kconfig

#
# Multimedia Video device configuration
#

menuconfig RADIO_ADAPTERS
	bool "Radio Adapters"
	depends on VIDEO_V4L2
	default y
	---help---
	  Say Y here to enable selecting AM/FM radio adapters.

if RADIO_ADAPTERS && VIDEO_V4L2

config RADIO_SI470X
	bool "Silicon Labs Si470x FM Radio Receiver support"
	depends on VIDEO_V4L2

source "drivers/media/radio/si470x/Kconfig"

config USB_MR800
	tristate "AverMedia MR 800 USB FM radio support"
	depends on USB && VIDEO_V4L2
	---help---
	  Say Y here if you want to connect this type of radio to your
	  computer's USB port. Note that the audio is not digital, and
	  you must connect the line out connector to a sound card or a
	  set of speakers.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-mr800.

config USB_DSBR
	tristate "D-Link/GemTek USB FM radio support"
	depends on USB && VIDEO_V4L2
	---help---
	  Say Y here if you want to connect this type of radio to your
	  computer's USB port. Note that the audio is not digital, and
	  you must connect the line out connector to a sound card or a
	  set of speakers.

	  To compile this driver as a module, choose M here: the
	  module will be called dsbr100.

config RADIO_MAXIRADIO
	tristate "Guillemot MAXI Radio FM 2000 radio"
	depends on VIDEO_V4L2 && PCI && SND
	---help---
	  Choose Y here if you have this radio card.  This card may also be
	  found as Gemtek PCI FM.

	  In order to control your radio card, you will need to use programs
	  that are compatible with the Video For Linux API.  Information on
	  this API and pointers to "v4l" programs may be found at
	  <file:Documentation/video4linux/API.html>.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-maxiradio.


config I2C_SI4713
	tristate "I2C driver for Silicon Labs Si4713 device"
	depends on I2C && VIDEO_V4L2
	---help---
	  Say Y here if you want support to Si4713 I2C device.
	  This device driver supports only i2c bus.

	  To compile this driver as a module, choose M here: the
	  module will be called si4713.

config RADIO_SI4713
	tristate "Silicon Labs Si4713 FM Radio Transmitter support"
	depends on I2C && VIDEO_V4L2
	select I2C_SI4713
	---help---
	  Say Y here if you want support to Si4713 FM Radio Transmitter.
	  This device can transmit audio through FM. It can transmit
	  RDS and RBDS signals as well. This module is the v4l2 radio
	  interface for the i2c driver of this device.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-si4713.

config USB_KEENE
	tristate "Keene FM Transmitter USB support"
	depends on USB && VIDEO_V4L2
	---help---
	  Say Y here if you want to connect this type of FM transmitter
	  to your computer's USB port.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-keene.

config RADIO_TEA5764
	tristate "TEA5764 I2C FM radio support"
	depends on I2C && VIDEO_V4L2
	---help---
	  Say Y here if you want to use the TEA5764 FM chip found in
	  EZX phones. This FM chip is present in EZX phones from Motorola,
	  connected to internal pxa I2C bus.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-tea5764.

config RADIO_TEA5764_XTAL
	bool "TEA5764 crystal reference"
	depends on RADIO_TEA5764=y
	default y
	help
	  Say Y here if TEA5764 have a 32768 Hz crystal in circuit, say N
	  here if TEA5764 reference frequency is connected in FREQIN.

config RADIO_SAA7706H
	tristate "SAA7706H Car Radio DSP"
	depends on I2C && VIDEO_V4L2
	---help---
	  Say Y here if you want to use the SAA7706H Car radio Digital
	  Signal Processor, found for instance on the Russellville development
	  board. On the russellville the device is connected to internal
	  timberdale I2C bus.

	  To compile this driver as a module, choose M here: the
	  module will be called SAA7706H.

config RADIO_TEF6862
	tristate "TEF6862 Car Radio Enhanced Selectivity Tuner"
	depends on I2C && VIDEO_V4L2
	---help---
	  Say Y here if you want to use the TEF6862 Car Radio Enhanced
	  Selectivity Tuner, found for instance on the Russellville development
	  board. On the russellville the device is connected to internal
	  timberdale I2C bus.

	  To compile this driver as a module, choose M here: the
	  module will be called TEF6862.

config RADIO_TIMBERDALE
	tristate "Enable the Timberdale radio driver"
	depends on MFD_TIMBERDALE && VIDEO_V4L2
	depends on I2C	# for RADIO_SAA7706H
	select RADIO_TEF6862
	select RADIO_SAA7706H
	---help---
	  This is a kind of umbrella driver for the Radio Tuner and DSP
	  found behind the Timberdale FPGA on the Russellville board.
	  Enabling this driver will automatically select the DSP and tuner.

config RADIO_WL1273
	tristate "Texas Instruments WL1273 I2C FM Radio"
	depends on I2C && VIDEO_V4L2
	select MFD_CORE
	select MFD_WL1273_CORE
	select FW_LOADER
	---help---
	  Choose Y here if you have this FM radio chip.

	  In order to control your radio card, you will need to use programs
	  that are compatible with the Video For Linux 2 API.  Information on
	  this API and pointers to "v4l2" programs may be found at
	  <file:Documentation/video4linux/API.html>.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-wl1273.

# TI's ST based wl128x FM radio
source "drivers/media/radio/wl128x/Kconfig"

#
# ISA drivers configuration
#

menuconfig V4L_RADIO_ISA_DRIVERS
	bool "ISA radio devices"
	depends on ISA
	default n
	---help---
	  Say Y here to enable support for these ISA drivers.

if V4L_RADIO_ISA_DRIVERS

config RADIO_ISA
	depends on ISA
	tristate

config RADIO_CADET
	tristate "ADS Cadet AM/FM Tuner"
	depends on ISA && VIDEO_V4L2
	---help---
	  Choose Y here if you have one of these AM/FM radio cards, and then
	  fill in the port address below.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-cadet.

config RADIO_RTRACK
	tristate "AIMSlab RadioTrack (aka RadioReveal) support"
	depends on ISA && VIDEO_V4L2
	select RADIO_ISA
	---help---
	  Choose Y here if you have one of these FM radio cards, and then fill
	  in the port address below.

	  Note that newer AIMSlab RadioTrack cards have a different chipset
	  and are not supported by this driver.  For these cards, use the
	  RadioTrack II driver below.

	  If you have a GemTeks combined (PnP) sound- and radio card you must
	  use this driver as a module and setup the card with isapnptools.
	  You must also pass the module a suitable io parameter, 0x248 has
	  been reported to be used by these cards.

	  More information is contained in the file
	  <file:Documentation/video4linux/radiotrack.txt>.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-aimslab.

config RADIO_RTRACK_PORT
	hex "RadioTrack i/o port (0x20f or 0x30f)"
	depends on RADIO_RTRACK=y
	default "30f"
	help
	  Enter either 0x30f or 0x20f here.  The card default is 0x30f, if you
	  haven't changed the jumper setting on the card.

config RADIO_RTRACK2
	tristate "AIMSlab RadioTrack II support"
	depends on ISA && VIDEO_V4L2
	select RADIO_ISA
	---help---
	  Choose Y here if you have this FM radio card, and then fill in the
	  port address below.

	  Note: this driver hasn't been tested since a long time due to lack
	  of hardware. If you have this hardware, then please contact the
	  linux-media mailinglist.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-rtrack2.

config RADIO_RTRACK2_PORT
	hex "RadioTrack II i/o port (0x20c or 0x30c)"
	depends on RADIO_RTRACK2=y
	default "30c"
	help
	  Enter either 0x30c or 0x20c here.  The card default is 0x30c, if you
	  haven't changed the jumper setting on the card.

config RADIO_AZTECH
	tristate "Aztech/Packard Bell Radio"
	depends on ISA && VIDEO_V4L2
	select RADIO_ISA
	---help---
	  Choose Y here if you have one of these FM radio cards, and then fill
	  in the port address below.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-aztech.

config RADIO_AZTECH_PORT
	hex "Aztech/Packard Bell I/O port (0x350 or 0x358)"
	depends on RADIO_AZTECH=y
	default "350"
	help
	  Enter either 0x350 or 0x358 here.  The card default is 0x350, if you
	  haven't changed the setting of jumper JP3 on the card.  Removing the
	  jumper sets the card to 0x358.

config RADIO_GEMTEK
	tristate "GemTek Radio card (or compatible) support"
	depends on ISA && VIDEO_V4L2
	select RADIO_ISA
	---help---
	  Choose Y here if you have this FM radio card, and then fill in the
	  I/O port address and settings below. The following cards either have
	  GemTek Radio tuner or are rebranded GemTek Radio cards:

	  - Sound Vision 16 Gold with FM Radio
	  - Typhoon Radio card (some models)
	  - Hama Radio card

	  To compile this driver as a module, choose M here: the
	  module will be called radio-gemtek.

config RADIO_GEMTEK_PORT
	hex "Fixed I/O port (0x20c, 0x30c, 0x24c, 0x34c, 0x248 or 0x28c)"
	depends on RADIO_GEMTEK=y
	default "34c"
	help
	  Enter either 0x20c, 0x30c, 0x24c, 0x34c, 0x248 or 0x28c here. The
	  card default is 0x34c, if you haven't changed the jumper setting
	  on the card.

	  On Sound Vision 16 Gold PnP with FM Radio (ESS1869+FM Gemtek), the I/O
	  port is 0x20c, 0x248 or 0x28c.

	  If automatic I/O port probing is enabled this port will be used only
	  in case of automatic probing failure, ie. as a fallback.

config RADIO_GEMTEK_PROBE
	bool "Automatic I/O port probing"
	depends on RADIO_GEMTEK=y
	default y
	help
	  Say Y here to enable automatic probing for GemTek Radio card. The
	  following ports will be probed: 0x20c, 0x30c, 0x24c, 0x34c, 0x248 and
	  0x28c.

config RADIO_MIROPCM20
	tristate "miroSOUND PCM20 radio"
	depends on ISA && ISA_DMA_API && VIDEO_V4L2 && SND
	select SND_ISA
	select SND_MIRO
	---help---
	  Choose Y here if you have this FM radio card. You also need to enable
	  the ALSA sound system. This choice automatically selects the ALSA
	  sound card driver "Miro miroSOUND PCM1pro/PCM12/PCM20radio" as this
	  is required for the radio-miropcm20.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-miropcm20.

config RADIO_SF16FMI
	tristate "SF16-FMI/SF16-FMP/SF16-FMD Radio"
	depends on ISA && VIDEO_V4L2
	---help---
	  Choose Y here if you have one of these FM radio cards.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-sf16fmi.

config RADIO_SF16FMR2
	tristate "SF16-FMR2/SF16-FMD2 Radio"
	depends on ISA && VIDEO_V4L2 && SND
	---help---
	  Choose Y here if you have one of these FM radio cards.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-sf16fmr2.

config RADIO_TERRATEC
	tristate "TerraTec ActiveRadio ISA Standalone"
	depends on ISA && VIDEO_V4L2
	select RADIO_ISA
	---help---
	  Choose Y here if you have this FM radio card.

	  Note: this driver hasn't been tested since a long time due to lack
	  of hardware. If you have this hardware, then please contact the
	  linux-media mailinglist.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-terratec.

config RADIO_TRUST
	tristate "Trust FM radio card"
	depends on ISA && VIDEO_V4L2
	select RADIO_ISA
	help
	  This is a driver for the Trust FM radio cards. Say Y if you have
	  such a card and want to use it under Linux.

	  Note: this driver hasn't been tested since a long time due to lack
	  of hardware. If you have this hardware, then please contact the
	  linux-media mailinglist.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-trust.

config RADIO_TRUST_PORT
	hex "Trust i/o port (usually 0x350 or 0x358)"
	depends on RADIO_TRUST=y
	default "350"
	help
	  Enter the I/O port of your Trust FM radio card. If unsure, try the
	  values "0x350" or "0x358".

config RADIO_TYPHOON
	tristate "Typhoon Radio (a.k.a. EcoRadio)"
	depends on ISA && VIDEO_V4L2
	select RADIO_ISA
	---help---
	  Choose Y here if you have one of these FM radio cards, and then fill
	  in the port address and the frequency used for muting below.

	  Note: this driver hasn't been tested since a long time due to lack
	  of hardware. If you have this hardware, then please contact the
	  linux-media mailinglist.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-typhoon.

config RADIO_TYPHOON_PORT
	hex "Typhoon I/O port (0x316 or 0x336)"
	depends on RADIO_TYPHOON=y
	default "316"
	help
	  Enter the I/O port of your Typhoon or EcoRadio radio card.

config RADIO_TYPHOON_MUTEFREQ
	int "Typhoon frequency set when muting the device (kHz)"
	depends on RADIO_TYPHOON=y
	default "87500"
	help
	  Enter the frequency used for muting the radio. The device is never
	  completely silent. If the volume is just turned down, you can still
	  hear silent voices and music. For that reason, the frequency of the
	  radio device is set to the frequency you can enter here whenever
	  the device is muted. There should be no local radio station at that
	  frequency.

config RADIO_ZOLTRIX
	tristate "Zoltrix Radio"
	depends on ISA && VIDEO_V4L2
	select RADIO_ISA
	---help---
	  Choose Y here if you have one of these FM radio cards, and then fill
	  in the port address below.

	  Note: this driver hasn't been tested since a long time due to lack
	  of hardware. If you have this hardware, then please contact the
	  linux-media mailinglist.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-zoltrix.

config RADIO_ZOLTRIX_PORT
	hex "ZOLTRIX I/O port (0x20c or 0x30c)"
	depends on RADIO_ZOLTRIX=y
	default "20c"
	help
	  Enter the I/O port of your Zoltrix radio card.

endif # V4L_RADIO_ISA_DRIVERS

endif # RADIO_ADAPTERS
Commit	Line	Data
1da177e4 LT	1	#
	2	# Multimedia Video device configuration
	3	#
	4
c5da5afb JE	5	menuconfig RADIO_ADAPTERS
c5da5afb JE	6	bool "Radio Adapters"
057596ee	7	depends on VIDEO_V4L2
c5da5afb	8	default y
ff01652c MCC	9	---help---
ff01652c MCC	10	Say Y here to enable selecting AM/FM radio adapters.
c5da5afb	11
057596ee	12	if RADIO_ADAPTERS && VIDEO_V4L2
1da177e4	13
e21d9865 HV	14	config RADIO_SI470X
	15	bool "Silicon Labs Si470x FM Radio Receiver support"
	16	depends on VIDEO_V4L2
	17
	18	source "drivers/media/radio/si470x/Kconfig"
	19
	20	config USB_MR800
	21	tristate "AverMedia MR 800 USB FM radio support"
	22	depends on USB && VIDEO_V4L2
	23	---help---
	24	Say Y here if you want to connect this type of radio to your
	25	computer's USB port. Note that the audio is not digital, and
	26	you must connect the line out connector to a sound card or a
	27	set of speakers.
	28
	29	To compile this driver as a module, choose M here: the
	30	module will be called radio-mr800.
	31
	32	config USB_DSBR
	33	tristate "D-Link/GemTek USB FM radio support"
	34	depends on USB && VIDEO_V4L2
	35	---help---
	36	Say Y here if you want to connect this type of radio to your
	37	computer's USB port. Note that the audio is not digital, and
	38	you must connect the line out connector to a sound card or a
	39	set of speakers.
	40
	41	To compile this driver as a module, choose M here: the
	42	module will be called dsbr100.
	43
	44	config RADIO_MAXIRADIO
	45	tristate "Guillemot MAXI Radio FM 2000 radio"
cfb19b0a	46	depends on VIDEO_V4L2 && PCI && SND
e21d9865 HV	47	---help---
	48	Choose Y here if you have this radio card. This card may also be
	49	found as Gemtek PCI FM.
	50
	51	In order to control your radio card, you will need to use programs
	52	that are compatible with the Video For Linux API. Information on
	53	this API and pointers to "v4l" programs may be found at
	54	<file:Documentation/video4linux/API.html>.
	55
	56	To compile this driver as a module, choose M here: the
	57	module will be called radio-maxiradio.
	58
	59
	60	config I2C_SI4713
	61	tristate "I2C driver for Silicon Labs Si4713 device"
	62	depends on I2C && VIDEO_V4L2
	63	---help---
	64	Say Y here if you want support to Si4713 I2C device.
	65	This device driver supports only i2c bus.
	66
	67	To compile this driver as a module, choose M here: the
	68	module will be called si4713.
	69
	70	config RADIO_SI4713
	71	tristate "Silicon Labs Si4713 FM Radio Transmitter support"
	72	depends on I2C && VIDEO_V4L2
	73	select I2C_SI4713
	74	---help---
	75	Say Y here if you want support to Si4713 FM Radio Transmitter.
	76	This device can transmit audio through FM. It can transmit
	77	RDS and RBDS signals as well. This module is the v4l2 radio
	78	interface for the i2c driver of this device.
	79
	80	To compile this driver as a module, choose M here: the
	81	module will be called radio-si4713.
	82
1bf20c3a HV	83	config USB_KEENE
	84	tristate "Keene FM Transmitter USB support"
	85	depends on USB && VIDEO_V4L2
	86	---help---
	87	Say Y here if you want to connect this type of FM transmitter
	88	to your computer's USB port.
	89
	90	To compile this driver as a module, choose M here: the
	91	module will be called radio-keene.
	92
e21d9865 HV	93	config RADIO_TEA5764
	94	tristate "TEA5764 I2C FM radio support"
	95	depends on I2C && VIDEO_V4L2
	96	---help---
	97	Say Y here if you want to use the TEA5764 FM chip found in
	98	EZX phones. This FM chip is present in EZX phones from Motorola,
	99	connected to internal pxa I2C bus.
	100
	101	To compile this driver as a module, choose M here: the
	102	module will be called radio-tea5764.
	103
	104	config RADIO_TEA5764_XTAL
	105	bool "TEA5764 crystal reference"
	106	depends on RADIO_TEA5764=y
	107	default y
	108	help
	109	Say Y here if TEA5764 have a 32768 Hz crystal in circuit, say N
	110	here if TEA5764 reference frequency is connected in FREQIN.
	111
	112	config RADIO_SAA7706H
	113	tristate "SAA7706H Car Radio DSP"
	114	depends on I2C && VIDEO_V4L2
	115	---help---
	116	Say Y here if you want to use the SAA7706H Car radio Digital
	117	Signal Processor, found for instance on the Russellville development
	118	board. On the russellville the device is connected to internal
	119	timberdale I2C bus.
	120
	121	To compile this driver as a module, choose M here: the
	122	module will be called SAA7706H.
	123
	124	config RADIO_TEF6862
	125	tristate "TEF6862 Car Radio Enhanced Selectivity Tuner"
	126	depends on I2C && VIDEO_V4L2
	127	---help---
	128	Say Y here if you want to use the TEF6862 Car Radio Enhanced
	129	Selectivity Tuner, found for instance on the Russellville development
	130	board. On the russellville the device is connected to internal
	131	timberdale I2C bus.
	132
	133	To compile this driver as a module, choose M here: the
	134	module will be called TEF6862.
	135
	136	config RADIO_TIMBERDALE
	137	tristate "Enable the Timberdale radio driver"
	138	depends on MFD_TIMBERDALE && VIDEO_V4L2
	139	depends on I2C # for RADIO_SAA7706H
	140	select RADIO_TEF6862
	141	select RADIO_SAA7706H
	142	---help---
	143	This is a kind of umbrella driver for the Radio Tuner and DSP
	144	found behind the Timberdale FPGA on the Russellville board.
	145	Enabling this driver will automatically select the DSP and tuner.
	146
	147	config RADIO_WL1273
	148	tristate "Texas Instruments WL1273 I2C FM Radio"
	149	depends on I2C && VIDEO_V4L2
	150	select MFD_CORE
	151	select MFD_WL1273_CORE
	152	select FW_LOADER
	153	---help---
	154	Choose Y here if you have this FM radio chip.
	155
	156	In order to control your radio card, you will need to use programs
157	that are compatible with the Video For Linux 2 API. Information on
158	this API and pointers to "v4l2" programs may be found at
159	<file:Documentation/video4linux/API.html>.
160
161	To compile this driver as a module, choose M here: the
162	module will be called radio-wl1273.
163
164	# TI's ST based wl128x FM radio
165	source "drivers/media/radio/wl128x/Kconfig"
166
167	#
168	# ISA drivers configuration
169	#
170
171	menuconfig V4L_RADIO_ISA_DRIVERS
172	bool "ISA radio devices"
173	depends on ISA
174	default n
175	---help---
176	Say Y here to enable support for these ISA drivers.
177
178	if V4L_RADIO_ISA_DRIVERS
179
137c579c HV	180	config RADIO_ISA
	181	depends on ISA
	182	tristate
	183
1da177e4 LT	184	config RADIO_CADET
1da177e4 LT	185	tristate "ADS Cadet AM/FM Tuner"
c0c7fa09	186	depends on ISA && VIDEO_V4L2
1da177e4 LT	187	---help---
	188	Choose Y here if you have one of these AM/FM radio cards, and then
	189	fill in the port address below.
	190
1da177e4 LT	191	To compile this driver as a module, choose M here: the
	192	module will be called radio-cadet.
	193
	194	config RADIO_RTRACK
	195	tristate "AIMSlab RadioTrack (aka RadioReveal) support"
46ff2c72	196	depends on ISA && VIDEO_V4L2
cc3c6df1	197	select RADIO_ISA
1da177e4 LT	198	---help---
	199	Choose Y here if you have one of these FM radio cards, and then fill
	200	in the port address below.
	201
	202	Note that newer AIMSlab RadioTrack cards have a different chipset
	203	and are not supported by this driver. For these cards, use the
	204	RadioTrack II driver below.
	205
	206	If you have a GemTeks combined (PnP) sound- and radio card you must
	207	use this driver as a module and setup the card with isapnptools.
	208	You must also pass the module a suitable io parameter, 0x248 has
	209	been reported to be used by these cards.
	210
cc3c6df1	211	More information is contained in the file
1da177e4 LT	212	<file:Documentation/video4linux/radiotrack.txt>.
	213
	214	To compile this driver as a module, choose M here: the
	215	module will be called radio-aimslab.
	216
	217	config RADIO_RTRACK_PORT
	218	hex "RadioTrack i/o port (0x20f or 0x30f)"
	219	depends on RADIO_RTRACK=y
cc3c6df1	220	default "30f"
1da177e4 LT	221	help
	222	Enter either 0x30f or 0x20f here. The card default is 0x30f, if you
	223	haven't changed the jumper setting on the card.
	224
	225	config RADIO_RTRACK2
	226	tristate "AIMSlab RadioTrack II support"
f8c559f8	227	depends on ISA && VIDEO_V4L2
8bd7ef5a	228	select RADIO_ISA
1da177e4 LT	229	---help---
	230	Choose Y here if you have this FM radio card, and then fill in the
	231	port address below.
	232
8bd7ef5a HV	233	Note: this driver hasn't been tested since a long time due to lack
	234	of hardware. If you have this hardware, then please contact the
	235	linux-media mailinglist.
1da177e4 LT	236
	237	To compile this driver as a module, choose M here: the
	238	module will be called radio-rtrack2.
	239
	240	config RADIO_RTRACK2_PORT
	241	hex "RadioTrack II i/o port (0x20c or 0x30c)"
	242	depends on RADIO_RTRACK2=y
	243	default "30c"
	244	help
	245	Enter either 0x30c or 0x20c here. The card default is 0x30c, if you
	246	haven't changed the jumper setting on the card.
	247
	248	config RADIO_AZTECH
	249	tristate "Aztech/Packard Bell Radio"
a4366af4	250	depends on ISA && VIDEO_V4L2
3088fba8	251	select RADIO_ISA
1da177e4 LT	252	---help---
	253	Choose Y here if you have one of these FM radio cards, and then fill
	254	in the port address below.
	255
1da177e4 LT	256	To compile this driver as a module, choose M here: the
	257	module will be called radio-aztech.
	258
	259	config RADIO_AZTECH_PORT
	260	hex "Aztech/Packard Bell I/O port (0x350 or 0x358)"
	261	depends on RADIO_AZTECH=y
	262	default "350"
	263	help
	264	Enter either 0x350 or 0x358 here. The card default is 0x350, if you
	265	haven't changed the setting of jumper JP3 on the card. Removing the
	266	jumper sets the card to 0x358.
	267
	268	config RADIO_GEMTEK
3e7589c5	269	tristate "GemTek Radio card (or compatible) support"
d1c4ecde	270	depends on ISA && VIDEO_V4L2
f8c08524	271	select RADIO_ISA
1da177e4 LT	272	---help---
1da177e4 LT	273	Choose Y here if you have this FM radio card, and then fill in the
3e7589c5 PS	274	I/O port address and settings below. The following cards either have
	275	GemTek Radio tuner or are rebranded GemTek Radio cards:
	276
	277	- Sound Vision 16 Gold with FM Radio
	278	- Typhoon Radio card (some models)
	279	- Hama Radio card
1da177e4	280
1da177e4 LT	281	To compile this driver as a module, choose M here: the
	282	module will be called radio-gemtek.
	283
	284	config RADIO_GEMTEK_PORT
f8c08524	285	hex "Fixed I/O port (0x20c, 0x30c, 0x24c, 0x34c, 0x248 or 0x28c)"
1da177e4 LT	286	depends on RADIO_GEMTEK=y
	287	default "34c"
	288	help
f8c08524 HV	289	Enter either 0x20c, 0x30c, 0x24c, 0x34c, 0x248 or 0x28c here. The
	290	card default is 0x34c, if you haven't changed the jumper setting
	291	on the card.
	292
	293	On Sound Vision 16 Gold PnP with FM Radio (ESS1869+FM Gemtek), the I/O
3e7589c5	294	port is 0x20c, 0x248 or 0x28c.
f8c08524	295
3e7589c5 PS	296	If automatic I/O port probing is enabled this port will be used only
	297	in case of automatic probing failure, ie. as a fallback.
	298
	299	config RADIO_GEMTEK_PROBE
	300	bool "Automatic I/O port probing"
	301	depends on RADIO_GEMTEK=y
	302	default y
	303	help
	304	Say Y here to enable automatic probing for GemTek Radio card. The
	305	following ports will be probed: 0x20c, 0x30c, 0x24c, 0x34c, 0x248 and
	306	0x28c.
1da177e4	307
8366fc39 KH	308	config RADIO_MIROPCM20
8366fc39 KH	309	tristate "miroSOUND PCM20 radio"
4756fc64	310	depends on ISA && ISA_DMA_API && VIDEO_V4L2 && SND
dd7cdb88	311	select SND_ISA
8366fc39 KH	312	select SND_MIRO
	313	---help---
	314	Choose Y here if you have this FM radio card. You also need to enable
	315	the ALSA sound system. This choice automatically selects the ALSA
	316	sound card driver "Miro miroSOUND PCM1pro/PCM12/PCM20radio" as this
	317	is required for the radio-miropcm20.
	318
8366fc39 KH	319	To compile this driver as a module, choose M here: the
8366fc39 KH	320	module will be called radio-miropcm20.
1da177e4	321
1da177e4	322	config RADIO_SF16FMI
abed623c	323	tristate "SF16-FMI/SF16-FMP/SF16-FMD Radio"
a2ef73af	324	depends on ISA && VIDEO_V4L2
1da177e4	325	---help---
67cabf50	326	Choose Y here if you have one of these FM radio cards.
1da177e4	327
1da177e4 LT	328	To compile this driver as a module, choose M here: the
	329	module will be called radio-sf16fmi.
	330
	331	config RADIO_SF16FMR2
3491a88e	332	tristate "SF16-FMR2/SF16-FMD2 Radio"
42a741dc	333	depends on ISA && VIDEO_V4L2 && SND
1da177e4 LT	334	---help---
	335	Choose Y here if you have one of these FM radio cards.
	336
1da177e4 LT	337	To compile this driver as a module, choose M here: the
	338	module will be called radio-sf16fmr2.
	339
	340	config RADIO_TERRATEC
	341	tristate "TerraTec ActiveRadio ISA Standalone"
55ac7b69	342	depends on ISA && VIDEO_V4L2
32c51836	343	select RADIO_ISA
1da177e4	344	---help---
32c51836	345	Choose Y here if you have this FM radio card.
1da177e4	346
32c51836 HV	347	Note: this driver hasn't been tested since a long time due to lack
	348	of hardware. If you have this hardware, then please contact the
	349	linux-media mailinglist.
1da177e4 LT	350
	351	To compile this driver as a module, choose M here: the
	352	module will be called radio-terratec.
	353
1da177e4 LT	354	config RADIO_TRUST
1da177e4 LT	355	tristate "Trust FM radio card"
982eddb9	356	depends on ISA && VIDEO_V4L2
1d211f26	357	select RADIO_ISA
1da177e4 LT	358	help
	359	This is a driver for the Trust FM radio cards. Say Y if you have
	360	such a card and want to use it under Linux.
	361
1d211f26 HV	362	Note: this driver hasn't been tested since a long time due to lack
	363	of hardware. If you have this hardware, then please contact the
	364	linux-media mailinglist.
	365
1da177e4 LT	366	To compile this driver as a module, choose M here: the
	367	module will be called radio-trust.
	368
	369	config RADIO_TRUST_PORT
	370	hex "Trust i/o port (usually 0x350 or 0x358)"
	371	depends on RADIO_TRUST=y
	372	default "350"
	373	help
	374	Enter the I/O port of your Trust FM radio card. If unsure, try the
	375	values "0x350" or "0x358".
	376
	377	config RADIO_TYPHOON
	378	tristate "Typhoon Radio (a.k.a. EcoRadio)"
30c48305	379	depends on ISA && VIDEO_V4L2
da1ff351	380	select RADIO_ISA
1da177e4 LT	381	---help---
	382	Choose Y here if you have one of these FM radio cards, and then fill
	383	in the port address and the frequency used for muting below.
	384
da1ff351 HV	385	Note: this driver hasn't been tested since a long time due to lack
	386	of hardware. If you have this hardware, then please contact the
	387	linux-media mailinglist.
1da177e4 LT	388
	389	To compile this driver as a module, choose M here: the
	390	module will be called radio-typhoon.
	391
1da177e4 LT	392	config RADIO_TYPHOON_PORT
	393	hex "Typhoon I/O port (0x316 or 0x336)"
	394	depends on RADIO_TYPHOON=y
	395	default "316"
	396	help
	397	Enter the I/O port of your Typhoon or EcoRadio radio card.
	398
	399	config RADIO_TYPHOON_MUTEFREQ
	400	int "Typhoon frequency set when muting the device (kHz)"
	401	depends on RADIO_TYPHOON=y
	402	default "87500"
	403	help
	404	Enter the frequency used for muting the radio. The device is never
	405	completely silent. If the volume is just turned down, you can still
	406	hear silent voices and music. For that reason, the frequency of the
	407	radio device is set to the frequency you can enter here whenever
	408	the device is muted. There should be no local radio station at that
	409	frequency.
	410
	411	config RADIO_ZOLTRIX
	412	tristate "Zoltrix Radio"
2ab65299	413	depends on ISA && VIDEO_V4L2
6b39246c	414	select RADIO_ISA
1da177e4 LT	415	---help---
	416	Choose Y here if you have one of these FM radio cards, and then fill
	417	in the port address below.
	418
6b39246c HV	419	Note: this driver hasn't been tested since a long time due to lack
	420	of hardware. If you have this hardware, then please contact the
	421	linux-media mailinglist.
1da177e4 LT	422
	423	To compile this driver as a module, choose M here: the
	424	module will be called radio-zoltrix.
	425
	426	config RADIO_ZOLTRIX_PORT
	427	hex "ZOLTRIX I/O port (0x20c or 0x30c)"
	428	depends on RADIO_ZOLTRIX=y
	429	default "20c"
	430	help
	431	Enter the I/O port of your Zoltrix radio card.
	432
e21d9865	433	endif # V4L_RADIO_ISA_DRIVERS
57f05bfa	434
c5da5afb	435	endif # RADIO_ADAPTERS