Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | tda9840 - i2c-driver for the tda9840 by SGS Thomson | |
3 | ||
4 | Copyright (C) 1998-2003 Michael Hunold <michael@mihu.de> | |
a832781c | 5 | Copyright (C) 2008 Hans Verkuil <hverkuil@xs4all.nl> |
1da177e4 LT |
6 | |
7 | The tda9840 is a stereo/dual sound processor with digital | |
8 | identification. It can be found at address 0x84 on the i2c-bus. | |
9 | ||
10 | For detailed informations download the specifications directly | |
11 | from SGS Thomson at http://www.st.com | |
12 | ||
13 | This program is free software; you can redistribute it and/or modify | |
14 | it under the terms of the GNU General Public License as published by | |
15 | the Free Software Foundation; either version 2 of the License, or | |
16 | (at your option) any later version. | |
17 | ||
18 | This program is distributed in the hope that it will be useful, | |
19 | but WITHOUT ANY WARRANTY; without even the implied warranty of | |
20 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
21 | GNU General Public License for more details. | |
22 | ||
23 | You should have received a copy of the GNU General Public License | |
24 | along with this program; if not, write to the Free Software | |
25 | Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
26 | */ | |
27 | ||
a8733ca5 | 28 | |
1da177e4 LT |
29 | #include <linux/module.h> |
30 | #include <linux/ioctl.h> | |
31 | #include <linux/i2c.h> | |
a832781c HV |
32 | #include <media/v4l2-common.h> |
33 | #include <media/v4l2-i2c-drv-legacy.h> | |
1da177e4 LT |
34 | #include "tda9840.h" |
35 | ||
a832781c HV |
36 | MODULE_AUTHOR("Michael Hunold <michael@mihu.de>"); |
37 | MODULE_DESCRIPTION("tda9840 driver"); | |
38 | MODULE_LICENSE("GPL"); | |
39 | ||
40 | static int debug; | |
1da177e4 | 41 | module_param(debug, int, 0644); |
f87086e3 | 42 | |
a832781c | 43 | MODULE_PARM_DESC(debug, "Debug level (0-1)"); |
1da177e4 LT |
44 | |
45 | #define SWITCH 0x00 | |
46 | #define LEVEL_ADJUST 0x02 | |
47 | #define STEREO_ADJUST 0x03 | |
48 | #define TEST 0x04 | |
49 | ||
707ecf46 HV |
50 | #define TDA9840_SET_MUTE 0x00 |
51 | #define TDA9840_SET_MONO 0x10 | |
52 | #define TDA9840_SET_STEREO 0x2a | |
53 | #define TDA9840_SET_LANG1 0x12 | |
54 | #define TDA9840_SET_LANG2 0x1e | |
55 | #define TDA9840_SET_BOTH 0x1a | |
56 | #define TDA9840_SET_BOTH_R 0x16 | |
57 | #define TDA9840_SET_EXTERNAL 0x7a | |
58 | ||
1da177e4 | 59 | /* addresses to scan, found only at 0x42 (7-Bit) */ |
09df1c16 | 60 | static unsigned short normal_i2c[] = { I2C_ADDR_TDA9840, I2C_CLIENT_END }; |
1da177e4 LT |
61 | |
62 | /* magic definition of all other variables and things */ | |
63 | I2C_CLIENT_INSMOD; | |
64 | ||
a832781c HV |
65 | static void tda9840_write(struct i2c_client *client, u8 reg, u8 val) |
66 | { | |
67 | if (i2c_smbus_write_byte_data(client, reg, val)) | |
68 | v4l_dbg(1, debug, client, "error writing %02x to %02x\n", | |
69 | val, reg); | |
70 | } | |
1da177e4 | 71 | |
a832781c | 72 | static int tda9840_command(struct i2c_client *client, unsigned cmd, void *arg) |
1da177e4 | 73 | { |
707ecf46 | 74 | int result = 0; |
1da177e4 LT |
75 | int byte = *(int *)arg; |
76 | ||
77 | switch (cmd) { | |
707ecf46 HV |
78 | case VIDIOC_S_TUNER: { |
79 | struct v4l2_tuner *t = arg; | |
80 | int byte; | |
81 | ||
82 | if (t->index) | |
83 | return -EINVAL; | |
84 | ||
85 | switch (t->audmode) { | |
86 | case V4L2_TUNER_MODE_STEREO: | |
87 | byte = TDA9840_SET_STEREO; | |
88 | break; | |
89 | case V4L2_TUNER_MODE_LANG1_LANG2: | |
90 | byte = TDA9840_SET_BOTH; | |
91 | break; | |
92 | case V4L2_TUNER_MODE_LANG1: | |
93 | byte = TDA9840_SET_LANG1; | |
94 | break; | |
95 | case V4L2_TUNER_MODE_LANG2: | |
96 | byte = TDA9840_SET_LANG2; | |
97 | break; | |
98 | default: | |
99 | byte = TDA9840_SET_MONO; | |
100 | break; | |
101 | } | |
a832781c | 102 | v4l_dbg(1, debug, client, "TDA9840_SWITCH: 0x%02x\n", byte); |
707ecf46 HV |
103 | tda9840_write(client, SWITCH, byte); |
104 | break; | |
105 | } | |
106 | ||
107 | case VIDIOC_G_TUNER: { | |
108 | struct v4l2_tuner *t = arg; | |
109 | u8 byte; | |
1da177e4 | 110 | |
707ecf46 HV |
111 | t->rxsubchans = V4L2_TUNER_SUB_MONO; |
112 | if (1 != i2c_master_recv(client, &byte, 1)) { | |
113 | v4l_dbg(1, debug, client, | |
114 | "i2c_master_recv() failed\n"); | |
115 | return -EIO; | |
116 | } | |
117 | ||
118 | if (byte & 0x80) { | |
119 | v4l_dbg(1, debug, client, | |
120 | "TDA9840_DETECT: register contents invalid\n"); | |
1da177e4 LT |
121 | return -EINVAL; |
122 | } | |
123 | ||
707ecf46 HV |
124 | v4l_dbg(1, debug, client, "TDA9840_DETECT: byte: 0x%02x\n", byte); |
125 | ||
126 | switch (byte & 0x60) { | |
127 | case 0x00: | |
128 | t->rxsubchans = V4L2_TUNER_SUB_MONO; | |
129 | break; | |
130 | case 0x20: | |
131 | t->rxsubchans = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2; | |
132 | break; | |
133 | case 0x40: | |
134 | t->rxsubchans = V4L2_TUNER_SUB_STEREO | V4L2_TUNER_SUB_MONO; | |
135 | break; | |
136 | default: /* Incorrect detect */ | |
137 | t->rxsubchans = V4L2_TUNER_MODE_MONO; | |
138 | break; | |
139 | } | |
1da177e4 | 140 | break; |
707ecf46 | 141 | } |
1da177e4 LT |
142 | |
143 | case TDA9840_LEVEL_ADJUST: | |
a832781c | 144 | v4l_dbg(1, debug, client, "TDA9840_LEVEL_ADJUST: %d\n", byte); |
1da177e4 LT |
145 | |
146 | /* check for correct range */ | |
147 | if (byte > 25 || byte < -20) | |
148 | return -EINVAL; | |
149 | ||
150 | /* calculate actual value to set, see specs, page 18 */ | |
151 | byte /= 5; | |
152 | if (0 < byte) | |
153 | byte += 0x8; | |
154 | else | |
155 | byte = -byte; | |
a832781c | 156 | tda9840_write(client, LEVEL_ADJUST, byte); |
1da177e4 LT |
157 | break; |
158 | ||
159 | case TDA9840_STEREO_ADJUST: | |
a832781c | 160 | v4l_dbg(1, debug, client, "TDA9840_STEREO_ADJUST: %d\n", byte); |
1da177e4 LT |
161 | |
162 | /* check for correct range */ | |
163 | if (byte > 25 || byte < -24) | |
164 | return -EINVAL; | |
165 | ||
166 | /* calculate actual value to set */ | |
167 | byte /= 5; | |
168 | if (0 < byte) | |
169 | byte += 0x20; | |
170 | else | |
171 | byte = -byte; | |
172 | ||
a832781c | 173 | tda9840_write(client, STEREO_ADJUST, byte); |
1da177e4 | 174 | break; |
1da177e4 LT |
175 | default: |
176 | return -ENOIOCTLCMD; | |
177 | } | |
178 | ||
179 | if (result) | |
180 | return -EIO; | |
181 | ||
182 | return 0; | |
183 | } | |
184 | ||
a832781c HV |
185 | static int tda9840_probe(struct i2c_client *client, |
186 | const struct i2c_device_id *id) | |
1da177e4 | 187 | { |
a832781c HV |
188 | int result; |
189 | int byte; | |
1da177e4 LT |
190 | |
191 | /* let's see whether this adapter can support what we need */ | |
a832781c HV |
192 | if (!i2c_check_functionality(client->adapter, |
193 | I2C_FUNC_SMBUS_READ_BYTE_DATA | | |
194 | I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) | |
1da177e4 | 195 | return 0; |
1da177e4 | 196 | |
a832781c HV |
197 | v4l_info(client, "chip found @ 0x%x (%s)\n", |
198 | client->addr << 1, client->adapter->name); | |
1da177e4 LT |
199 | |
200 | /* set initial values for level & stereo - adjustment, mode */ | |
201 | byte = 0; | |
a832781c HV |
202 | result = tda9840_command(client, TDA9840_LEVEL_ADJUST, &byte); |
203 | result += tda9840_command(client, TDA9840_STEREO_ADJUST, &byte); | |
707ecf46 | 204 | tda9840_write(client, SWITCH, TDA9840_SET_STEREO); |
1da177e4 | 205 | if (result) { |
a832781c | 206 | v4l_dbg(1, debug, client, "could not initialize tda9840\n"); |
1da177e4 LT |
207 | return -ENODEV; |
208 | } | |
1da177e4 LT |
209 | return 0; |
210 | } | |
211 | ||
a832781c | 212 | static int tda9840_legacy_probe(struct i2c_adapter *adapter) |
1da177e4 | 213 | { |
a832781c HV |
214 | /* Let's see whether this is a known adapter we can attach to. |
215 | Prevents conflicts with tvaudio.c. */ | |
216 | return adapter->id == I2C_HW_SAA7146; | |
1da177e4 | 217 | } |
a832781c HV |
218 | static const struct i2c_device_id tda9840_id[] = { |
219 | { "tda9840", 0 }, | |
220 | { } | |
1da177e4 | 221 | }; |
a832781c | 222 | MODULE_DEVICE_TABLE(i2c, tda9840_id); |
1da177e4 | 223 | |
a832781c | 224 | static struct v4l2_i2c_driver_data v4l2_i2c_data = { |
fae91e72 | 225 | .name = "tda9840", |
a832781c HV |
226 | .driverid = I2C_DRIVERID_TDA9840, |
227 | .command = tda9840_command, | |
228 | .probe = tda9840_probe, | |
229 | .legacy_probe = tda9840_legacy_probe, | |
230 | .id_table = tda9840_id, | |
1da177e4 | 231 | }; |