Commit | Line | Data |
---|---|---|
483dfdb6 | 1 | /* |
7ca659e3 | 2 | * USB USBVISION Video device driver 0.9.9 |
483dfdb6 TM |
3 | * |
4 | * | |
5 | * | |
6 | * Copyright (c) 1999-2005 Joerg Heckenbach <joerg@heckenbach-aw.de> | |
7 | * | |
8 | * This module is part of usbvision driver project. | |
9 | * | |
10 | * This program is free software; you can redistribute it and/or modify | |
11 | * it under the terms of the GNU General Public License as published by | |
12 | * the Free Software Foundation; either version 2 of the License, or | |
13 | * (at your option) any later version. | |
14 | * | |
15 | * This program is distributed in the hope that it will be useful, | |
16 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
17 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
18 | * GNU General Public License for more details. | |
19 | * | |
20 | * You should have received a copy of the GNU General Public License | |
21 | * along with this program; if not, write to the Free Software | |
22 | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
23 | * | |
24 | * Let's call the version 0.... until compression decoding is completely | |
25 | * implemented. | |
26 | * | |
27 | * This driver is written by Jose Ignacio Gijon and Joerg Heckenbach. | |
28 | * It was based on USB CPiA driver written by Peter Pregler, | |
29 | * Scott J. Bertin and Johannes Erdfelt | |
30 | * Ideas are taken from bttv driver by Ralph Metzler, Marcus Metzler & | |
31 | * Gerd Knorr and zoran 36120/36125 driver by Pauline Middelink | |
32 | * Updates to driver completed by Dwaine P. Garden | |
33 | * | |
34 | * | |
35 | * TODO: | |
36 | * - use submit_urb for all setup packets | |
37 | * - Fix memory settings for nt1004. It is 4 times as big as the | |
38 | * nt1003 memory. | |
39 | * - Add audio on endpoint 3 for nt1004 chip. Seems impossible, needs a codec interface. Which one? | |
40 | * - Clean up the driver. | |
41 | * - optimization for performance. | |
42 | * - Add Videotext capability (VBI). Working on it..... | |
43 | * - Check audio for other devices | |
44 | * | |
45 | */ | |
46 | ||
f30ebd43 | 47 | #include <linux/version.h> |
483dfdb6 TM |
48 | #include <linux/kernel.h> |
49 | #include <linux/sched.h> | |
50 | #include <linux/list.h> | |
51 | #include <linux/timer.h> | |
52 | #include <linux/slab.h> | |
53 | #include <linux/mm.h> | |
54 | #include <linux/utsname.h> | |
55 | #include <linux/highmem.h> | |
56 | #include <linux/smp_lock.h> | |
57 | #include <linux/videodev.h> | |
58 | #include <linux/vmalloc.h> | |
59 | #include <linux/module.h> | |
60 | #include <linux/init.h> | |
61 | #include <linux/spinlock.h> | |
62 | #include <asm/io.h> | |
63 | #include <linux/videodev2.h> | |
64 | #include <linux/video_decoder.h> | |
65 | #include <linux/i2c.h> | |
66 | ||
67 | #include <media/saa7115.h> | |
68 | #include <media/v4l2-common.h> | |
69 | #include <media/tuner.h> | |
70 | #include <media/audiochip.h> | |
71 | ||
a1ed551c MCC |
72 | #include <linux/moduleparam.h> |
73 | #include <linux/workqueue.h> | |
483dfdb6 TM |
74 | |
75 | #ifdef CONFIG_KMOD | |
76 | #include <linux/kmod.h> | |
77 | #endif | |
78 | ||
79 | #include "usbvision.h" | |
80 | ||
81 | #define DRIVER_AUTHOR "Joerg Heckenbach <joerg@heckenbach-aw.de>, Dwaine Garden <DwaineGarden@rogers.com>" | |
82 | #define DRIVER_NAME "usbvision" | |
83 | #define DRIVER_ALIAS "USBVision" | |
84 | #define DRIVER_DESC "USBVision USB Video Device Driver for Linux" | |
85 | #define DRIVER_LICENSE "GPL" | |
86 | #define USBVISION_DRIVER_VERSION_MAJOR 0 | |
87 | #define USBVISION_DRIVER_VERSION_MINOR 9 | |
88 | #define USBVISION_DRIVER_VERSION_PATCHLEVEL 9 | |
89 | #define USBVISION_DRIVER_VERSION KERNEL_VERSION(USBVISION_DRIVER_VERSION_MAJOR,USBVISION_DRIVER_VERSION_MINOR,USBVISION_DRIVER_VERSION_PATCHLEVEL) | |
90 | #define USBVISION_VERSION_STRING __stringify(USBVISION_DRIVER_VERSION_MAJOR) "." __stringify(USBVISION_DRIVER_VERSION_MINOR) "." __stringify(USBVISION_DRIVER_VERSION_PATCHLEVEL) | |
91 | ||
92 | #define ENABLE_HEXDUMP 0 /* Enable if you need it */ | |
93 | ||
94 | ||
483dfdb6 TM |
95 | #ifdef USBVISION_DEBUG |
96 | #define PDEBUG(level, fmt, args...) \ | |
97 | if (video_debug & (level)) info("[%s:%d] " fmt, __PRETTY_FUNCTION__, __LINE__ , ## args) | |
98 | #else | |
99 | #define PDEBUG(level, fmt, args...) do {} while(0) | |
100 | #endif | |
101 | ||
102 | #define DBG_IOCTL 1<<0 | |
103 | #define DBG_IO 1<<1 | |
104 | #define DBG_PROBE 1<<2 | |
c876a346 | 105 | #define DBG_MMAP 1<<3 |
483dfdb6 TM |
106 | |
107 | //String operations | |
108 | #define rmspace(str) while(*str==' ') str++; | |
109 | #define goto2next(str) while(*str!=' ') str++; while(*str==' ') str++; | |
110 | ||
111 | ||
112 | static int usbvision_nr = 0; // sequential number of usbvision device | |
113 | ||
114 | static struct usbvision_v4l2_format_st usbvision_v4l2_format[] = { | |
115 | { 1, 1, 8, V4L2_PIX_FMT_GREY , "GREY" }, | |
116 | { 1, 2, 16, V4L2_PIX_FMT_RGB565 , "RGB565" }, | |
117 | { 1, 3, 24, V4L2_PIX_FMT_RGB24 , "RGB24" }, | |
118 | { 1, 4, 32, V4L2_PIX_FMT_RGB32 , "RGB32" }, | |
119 | { 1, 2, 16, V4L2_PIX_FMT_RGB555 , "RGB555" }, | |
120 | { 1, 2, 16, V4L2_PIX_FMT_YUYV , "YUV422" }, | |
121 | { 1, 2, 12, V4L2_PIX_FMT_YVU420 , "YUV420P" }, // 1.5 ! | |
122 | { 1, 2, 16, V4L2_PIX_FMT_YUV422P , "YUV422P" } | |
123 | }; | |
124 | ||
125 | /* supported tv norms */ | |
126 | static struct usbvision_tvnorm tvnorms[] = { | |
127 | { | |
128 | .name = "PAL", | |
129 | .id = V4L2_STD_PAL, | |
130 | }, { | |
131 | .name = "NTSC", | |
132 | .id = V4L2_STD_NTSC, | |
133 | }, { | |
134 | .name = "SECAM", | |
135 | .id = V4L2_STD_SECAM, | |
136 | }, { | |
137 | .name = "PAL-M", | |
138 | .id = V4L2_STD_PAL_M, | |
139 | } | |
140 | }; | |
141 | ||
142 | #define TVNORMS ARRAY_SIZE(tvnorms) | |
143 | ||
144 | // Function prototypes | |
145 | static void usbvision_release(struct usb_usbvision *usbvision); | |
146 | ||
147 | // Default initalization of device driver parameters | |
148 | static int isocMode = ISOC_MODE_COMPRESS; // Set the default format for ISOC endpoint | |
149 | static int video_debug = 0; // Set the default Debug Mode of the device driver | |
150 | static int PowerOnAtOpen = 1; // Set the default device to power on at startup | |
151 | static int video_nr = -1; // Sequential Number of Video Device | |
152 | static int radio_nr = -1; // Sequential Number of Radio Device | |
153 | static int vbi_nr = -1; // Sequential Number of VBI Device | |
154 | static char *CustomDevice=NULL; // Set as nothing.... | |
155 | ||
156 | // Grab parameters for the device driver | |
157 | ||
158 | #if defined(module_param) // Showing parameters under SYSFS | |
159 | module_param(isocMode, int, 0444); | |
160 | module_param(video_debug, int, 0444); | |
161 | module_param(PowerOnAtOpen, int, 0444); | |
162 | module_param(video_nr, int, 0444); | |
163 | module_param(radio_nr, int, 0444); | |
164 | module_param(vbi_nr, int, 0444); | |
165 | module_param(CustomDevice, charp, 0444); | |
166 | #else // Old Style | |
167 | MODULE_PARAM(isocMode, "i"); | |
168 | MODULE_PARM(video_debug, "i"); // Grab the Debug Mode of the device driver | |
169 | MODULE_PARM(adjustCompression, "i"); // Grab the compression to be adaptive | |
170 | MODULE_PARM(PowerOnAtOpen, "i"); // Grab the device to power on at startup | |
171 | MODULE_PARM(SwitchSVideoInput, "i"); // To help people with Black and White output with using s-video input. Some cables and input device are wired differently. | |
172 | MODULE_PARM(video_nr, "i"); // video_nr option allows to specify a certain /dev/videoX device (like /dev/video0 or /dev/video1 ...) | |
173 | MODULE_PARM(radio_nr, "i"); // radio_nr option allows to specify a certain /dev/radioX device (like /dev/radio0 or /dev/radio1 ...) | |
174 | MODULE_PARM(vbi_nr, "i"); // vbi_nr option allows to specify a certain /dev/vbiX device (like /dev/vbi0 or /dev/vbi1 ...) | |
175 | MODULE_PARM(CustomDevice, "s"); // .... CustomDevice | |
176 | #endif | |
177 | ||
178 | MODULE_PARM_DESC(isocMode, " Set the default format for ISOC endpoint. Default: 0x60 (Compression On)"); | |
179 | MODULE_PARM_DESC(video_debug, " Set the default Debug Mode of the device driver. Default: 0 (Off)"); | |
180 | MODULE_PARM_DESC(PowerOnAtOpen, " Set the default device to power on when device is opened. Default: 1 (On)"); | |
181 | MODULE_PARM_DESC(video_nr, "Set video device number (/dev/videoX). Default: -1 (autodetect)"); | |
182 | MODULE_PARM_DESC(radio_nr, "Set radio device number (/dev/radioX). Default: -1 (autodetect)"); | |
183 | MODULE_PARM_DESC(vbi_nr, "Set vbi device number (/dev/vbiX). Default: -1 (autodetect)"); | |
184 | MODULE_PARM_DESC(CustomDevice, " Define the fine tuning parameters for the device. Default: null"); | |
185 | ||
186 | ||
187 | // Misc stuff | |
188 | MODULE_AUTHOR(DRIVER_AUTHOR); | |
189 | MODULE_DESCRIPTION(DRIVER_DESC); | |
190 | MODULE_LICENSE(DRIVER_LICENSE); | |
a1ed551c MCC |
191 | MODULE_VERSION(USBVISION_VERSION_STRING); |
192 | MODULE_ALIAS(DRIVER_ALIAS); | |
483dfdb6 TM |
193 | |
194 | ||
195 | /****************************************************************************************/ | |
196 | /* SYSFS Code - Copied from the stv680.c usb module. */ | |
197 | /* Device information is located at /sys/class/video4linux/video0 */ | |
198 | /* Device parameters information is located at /sys/module/usbvision */ | |
199 | /* Device USB Information is located at /sys/bus/usb/drivers/USBVision Video Grabber */ | |
200 | /****************************************************************************************/ | |
201 | ||
202 | ||
203 | #define YES_NO(x) ((x) ? "Yes" : "No") | |
204 | ||
205 | static inline struct usb_usbvision *cd_to_usbvision(struct class_device *cd) | |
206 | { | |
207 | struct video_device *vdev = to_video_device(cd); | |
208 | return video_get_drvdata(vdev); | |
209 | } | |
210 | ||
211 | static ssize_t show_version(struct class_device *cd, char *buf) | |
212 | { | |
213 | return sprintf(buf, "%s\n", USBVISION_VERSION_STRING); | |
214 | } | |
215 | static CLASS_DEVICE_ATTR(version, S_IRUGO, show_version, NULL); | |
216 | ||
217 | static ssize_t show_model(struct class_device *class_dev, char *buf) | |
218 | { | |
219 | struct video_device *vdev = to_video_device(class_dev); | |
220 | struct usb_usbvision *usbvision = video_get_drvdata(vdev); | |
221 | return sprintf(buf, "%s\n", usbvision_device_data[usbvision->DevModel].ModelString); | |
222 | } | |
223 | static CLASS_DEVICE_ATTR(model, S_IRUGO, show_model, NULL); | |
224 | ||
225 | static ssize_t show_hue(struct class_device *class_dev, char *buf) | |
226 | { | |
227 | struct video_device *vdev = to_video_device(class_dev); | |
228 | struct usb_usbvision *usbvision = video_get_drvdata(vdev); | |
229 | struct v4l2_control ctrl; | |
230 | ctrl.id = V4L2_CID_HUE; | |
231 | ctrl.value = 0; | |
232 | call_i2c_clients(usbvision, VIDIOC_G_CTRL, &ctrl); | |
233 | return sprintf(buf, "%d\n", ctrl.value >> 8); | |
234 | } | |
235 | static CLASS_DEVICE_ATTR(hue, S_IRUGO, show_hue, NULL); | |
236 | ||
237 | static ssize_t show_contrast(struct class_device *class_dev, char *buf) | |
238 | { | |
239 | struct video_device *vdev = to_video_device(class_dev); | |
240 | struct usb_usbvision *usbvision = video_get_drvdata(vdev); | |
241 | struct v4l2_control ctrl; | |
242 | ctrl.id = V4L2_CID_CONTRAST; | |
243 | ctrl.value = 0; | |
244 | call_i2c_clients(usbvision, VIDIOC_G_CTRL, &ctrl); | |
245 | return sprintf(buf, "%d\n", ctrl.value >> 8); | |
246 | } | |
247 | static CLASS_DEVICE_ATTR(contrast, S_IRUGO, show_contrast, NULL); | |
248 | ||
249 | static ssize_t show_brightness(struct class_device *class_dev, char *buf) | |
250 | { | |
251 | struct video_device *vdev = to_video_device(class_dev); | |
252 | struct usb_usbvision *usbvision = video_get_drvdata(vdev); | |
253 | struct v4l2_control ctrl; | |
254 | ctrl.id = V4L2_CID_BRIGHTNESS; | |
255 | ctrl.value = 0; | |
256 | call_i2c_clients(usbvision, VIDIOC_G_CTRL, &ctrl); | |
257 | return sprintf(buf, "%d\n", ctrl.value >> 8); | |
258 | } | |
259 | static CLASS_DEVICE_ATTR(brightness, S_IRUGO, show_brightness, NULL); | |
260 | ||
261 | static ssize_t show_saturation(struct class_device *class_dev, char *buf) | |
262 | { | |
263 | struct video_device *vdev = to_video_device(class_dev); | |
264 | struct usb_usbvision *usbvision = video_get_drvdata(vdev); | |
265 | struct v4l2_control ctrl; | |
266 | ctrl.id = V4L2_CID_SATURATION; | |
267 | ctrl.value = 0; | |
268 | call_i2c_clients(usbvision, VIDIOC_G_CTRL, &ctrl); | |
269 | return sprintf(buf, "%d\n", ctrl.value >> 8); | |
270 | } | |
271 | static CLASS_DEVICE_ATTR(saturation, S_IRUGO, show_saturation, NULL); | |
272 | ||
273 | static ssize_t show_streaming(struct class_device *class_dev, char *buf) | |
274 | { | |
275 | struct video_device *vdev = to_video_device(class_dev); | |
276 | struct usb_usbvision *usbvision = video_get_drvdata(vdev); | |
277 | return sprintf(buf, "%s\n", YES_NO(usbvision->streaming==Stream_On?1:0)); | |
278 | } | |
279 | static CLASS_DEVICE_ATTR(streaming, S_IRUGO, show_streaming, NULL); | |
280 | ||
281 | static ssize_t show_compression(struct class_device *class_dev, char *buf) | |
282 | { | |
283 | struct video_device *vdev = to_video_device(class_dev); | |
284 | struct usb_usbvision *usbvision = video_get_drvdata(vdev); | |
285 | return sprintf(buf, "%s\n", YES_NO(usbvision->isocMode==ISOC_MODE_COMPRESS)); | |
286 | } | |
287 | static CLASS_DEVICE_ATTR(compression, S_IRUGO, show_compression, NULL); | |
288 | ||
289 | static ssize_t show_device_bridge(struct class_device *class_dev, char *buf) | |
290 | { | |
291 | struct video_device *vdev = to_video_device(class_dev); | |
292 | struct usb_usbvision *usbvision = video_get_drvdata(vdev); | |
293 | return sprintf(buf, "%d\n", usbvision->bridgeType); | |
294 | } | |
295 | static CLASS_DEVICE_ATTR(bridge, S_IRUGO, show_device_bridge, NULL); | |
296 | ||
297 | static void usbvision_create_sysfs(struct video_device *vdev) | |
298 | { | |
299 | int res; | |
300 | if (vdev) { | |
301 | res=video_device_create_file(vdev, &class_device_attr_version); | |
302 | res=video_device_create_file(vdev, &class_device_attr_model); | |
303 | res=video_device_create_file(vdev, &class_device_attr_hue); | |
304 | res=video_device_create_file(vdev, &class_device_attr_contrast); | |
305 | res=video_device_create_file(vdev, &class_device_attr_brightness); | |
306 | res=video_device_create_file(vdev, &class_device_attr_saturation); | |
307 | res=video_device_create_file(vdev, &class_device_attr_streaming); | |
308 | res=video_device_create_file(vdev, &class_device_attr_compression); | |
309 | res=video_device_create_file(vdev, &class_device_attr_bridge); | |
310 | } | |
311 | } | |
312 | ||
313 | static void usbvision_remove_sysfs(struct video_device *vdev) | |
314 | { | |
315 | if (vdev) { | |
316 | video_device_remove_file(vdev, &class_device_attr_version); | |
317 | video_device_remove_file(vdev, &class_device_attr_model); | |
318 | video_device_remove_file(vdev, &class_device_attr_hue); | |
319 | video_device_remove_file(vdev, &class_device_attr_contrast); | |
320 | video_device_remove_file(vdev, &class_device_attr_brightness); | |
321 | video_device_remove_file(vdev, &class_device_attr_saturation); | |
322 | video_device_remove_file(vdev, &class_device_attr_streaming); | |
323 | video_device_remove_file(vdev, &class_device_attr_compression); | |
324 | video_device_remove_file(vdev, &class_device_attr_bridge); | |
325 | } | |
326 | } | |
327 | ||
328 | ||
329 | /* | |
330 | * usbvision_open() | |
331 | * | |
332 | * This is part of Video 4 Linux API. The driver can be opened by one | |
333 | * client only (checks internal counter 'usbvision->user'). The procedure | |
334 | * then allocates buffers needed for video processing. | |
335 | * | |
336 | */ | |
337 | static int usbvision_v4l2_open(struct inode *inode, struct file *file) | |
338 | { | |
339 | struct video_device *dev = video_devdata(file); | |
340 | struct usb_usbvision *usbvision = (struct usb_usbvision *) video_get_drvdata(dev); | |
341 | int errCode = 0; | |
342 | ||
343 | PDEBUG(DBG_IO, "open"); | |
344 | ||
345 | ||
346 | usbvision_reset_powerOffTimer(usbvision); | |
347 | ||
348 | if (usbvision->user) | |
349 | errCode = -EBUSY; | |
350 | else { | |
351 | /* Allocate memory for the frame buffers */ | |
352 | errCode = usbvision_frames_alloc(usbvision); | |
353 | if(!errCode) { | |
354 | /* Allocate memory for the scratch ring buffer */ | |
355 | errCode = usbvision_scratch_alloc(usbvision); | |
356 | if(!errCode) { | |
357 | /* Allocate memory for the USB S buffers */ | |
358 | errCode = usbvision_sbuf_alloc(usbvision); | |
359 | if ((!errCode) && (usbvision->isocMode==ISOC_MODE_COMPRESS)) { | |
360 | /* Allocate intermediate decompression buffers only if needed */ | |
361 | errCode = usbvision_decompress_alloc(usbvision); | |
362 | } | |
363 | } | |
364 | } | |
365 | if (errCode) { | |
366 | /* Deallocate all buffers if trouble */ | |
367 | usbvision_frames_free(usbvision); | |
368 | usbvision_scratch_free(usbvision); | |
369 | usbvision_sbuf_free(usbvision); | |
370 | usbvision_decompress_free(usbvision); | |
371 | } | |
372 | } | |
373 | ||
374 | /* If so far no errors then we shall start the camera */ | |
375 | if (!errCode) { | |
376 | down(&usbvision->lock); | |
377 | if (usbvision->power == 0) { | |
378 | usbvision_power_on(usbvision); | |
379 | usbvision_init_i2c(usbvision); | |
380 | } | |
381 | ||
382 | /* Send init sequence only once, it's large! */ | |
383 | if (!usbvision->initialized) { | |
384 | int setup_ok = 0; | |
385 | setup_ok = usbvision_setup(usbvision,isocMode); | |
386 | if (setup_ok) | |
387 | usbvision->initialized = 1; | |
388 | else | |
389 | errCode = -EBUSY; | |
390 | } | |
391 | ||
392 | if (!errCode) { | |
393 | usbvision_begin_streaming(usbvision); | |
394 | errCode = usbvision_init_isoc(usbvision); | |
395 | /* device needs to be initialized before isoc transfer */ | |
396 | usbvision_muxsel(usbvision,0); | |
397 | usbvision->user++; | |
398 | } | |
399 | else { | |
400 | if (PowerOnAtOpen) { | |
401 | usbvision_i2c_usb_del_bus(&usbvision->i2c_adap); | |
402 | usbvision_power_off(usbvision); | |
403 | usbvision->initialized = 0; | |
404 | } | |
405 | } | |
406 | up(&usbvision->lock); | |
407 | } | |
408 | ||
409 | if (errCode) { | |
410 | } | |
411 | ||
412 | /* prepare queues */ | |
413 | usbvision_empty_framequeues(usbvision); | |
414 | ||
415 | PDEBUG(DBG_IO, "success"); | |
416 | return errCode; | |
417 | } | |
418 | ||
419 | /* | |
420 | * usbvision_v4l2_close() | |
421 | * | |
422 | * This is part of Video 4 Linux API. The procedure | |
423 | * stops streaming and deallocates all buffers that were earlier | |
424 | * allocated in usbvision_v4l2_open(). | |
425 | * | |
426 | */ | |
427 | static int usbvision_v4l2_close(struct inode *inode, struct file *file) | |
428 | { | |
429 | struct video_device *dev = video_devdata(file); | |
430 | struct usb_usbvision *usbvision = (struct usb_usbvision *) video_get_drvdata(dev); | |
431 | ||
432 | PDEBUG(DBG_IO, "close"); | |
433 | down(&usbvision->lock); | |
434 | ||
435 | usbvision_audio_off(usbvision); | |
436 | usbvision_restart_isoc(usbvision); | |
437 | usbvision_stop_isoc(usbvision); | |
438 | ||
439 | usbvision_decompress_free(usbvision); | |
440 | usbvision_rvfree(usbvision->fbuf, usbvision->fbuf_size); | |
441 | usbvision_scratch_free(usbvision); | |
442 | usbvision_sbuf_free(usbvision); | |
443 | ||
444 | usbvision->user--; | |
445 | ||
446 | if (PowerOnAtOpen) { | |
447 | /* power off in a little while to avoid off/on every close/open short sequences */ | |
448 | usbvision_set_powerOffTimer(usbvision); | |
449 | usbvision->initialized = 0; | |
450 | } | |
451 | ||
452 | up(&usbvision->lock); | |
453 | ||
454 | if (usbvision->remove_pending) { | |
455 | info("%s: Final disconnect", __FUNCTION__); | |
456 | usbvision_release(usbvision); | |
457 | } | |
458 | ||
459 | PDEBUG(DBG_IO, "success"); | |
460 | ||
461 | ||
462 | return 0; | |
463 | } | |
464 | ||
465 | ||
466 | /* | |
467 | * usbvision_ioctl() | |
468 | * | |
469 | * This is part of Video 4 Linux API. The procedure handles ioctl() calls. | |
470 | * | |
471 | */ | |
472 | static int usbvision_v4l2_do_ioctl(struct inode *inode, struct file *file, | |
473 | unsigned int cmd, void *arg) | |
474 | { | |
475 | struct video_device *dev = video_devdata(file); | |
476 | struct usb_usbvision *usbvision = (struct usb_usbvision *) video_get_drvdata(dev); | |
477 | ||
478 | if (!USBVISION_IS_OPERATIONAL(usbvision)) | |
479 | return -EFAULT; | |
480 | ||
481 | switch (cmd) { | |
482 | ||
483 | #ifdef CONFIG_VIDEO_ADV_DEBUG | |
484 | /* ioctls to allow direct acces to the NT100x registers */ | |
485 | case VIDIOC_INT_G_REGISTER: | |
486 | { | |
487 | struct v4l2_register *reg = arg; | |
488 | int errCode; | |
489 | ||
490 | if (reg->i2c_id != 0) | |
491 | return -EINVAL; | |
492 | /* NT100x has a 8-bit register space */ | |
493 | errCode = usbvision_read_reg(usbvision, reg->reg&0xff); | |
494 | if (errCode < 0) { | |
495 | err("%s: VIDIOC_INT_G_REGISTER failed: error %d", __FUNCTION__, errCode); | |
496 | } | |
497 | else { | |
498 | reg->val=(unsigned char)errCode; | |
499 | PDEBUG(DBG_IOCTL, "VIDIOC_INT_G_REGISTER reg=0x%02X, value=0x%02X", | |
500 | (unsigned int)reg->reg, reg->val); | |
501 | errCode = 0; // No error | |
502 | } | |
503 | return errCode; | |
504 | } | |
505 | case VIDIOC_INT_S_REGISTER: | |
506 | { | |
507 | struct v4l2_register *reg = arg; | |
508 | int errCode; | |
509 | ||
510 | if (reg->i2c_id != 0) | |
511 | return -EINVAL; | |
512 | if (!capable(CAP_SYS_ADMIN)) | |
513 | return -EPERM; | |
514 | errCode = usbvision_write_reg(usbvision, reg->reg&0xff, reg->val); | |
515 | if (errCode < 0) { | |
516 | err("%s: VIDIOC_INT_S_REGISTER failed: error %d", __FUNCTION__, errCode); | |
517 | } | |
518 | else { | |
519 | PDEBUG(DBG_IOCTL, "VIDIOC_INT_S_REGISTER reg=0x%02X, value=0x%02X", | |
520 | (unsigned int)reg->reg, reg->val); | |
521 | errCode = 0; | |
522 | } | |
523 | return 0; | |
524 | } | |
525 | #endif | |
526 | case VIDIOC_QUERYCAP: | |
527 | { | |
528 | struct v4l2_capability *vc=arg; | |
529 | ||
530 | memset(vc, 0, sizeof(*vc)); | |
531 | strlcpy(vc->driver, "USBVision", sizeof(vc->driver)); | |
532 | strlcpy(vc->card, usbvision_device_data[usbvision->DevModel].ModelString, | |
533 | sizeof(vc->card)); | |
534 | strlcpy(vc->bus_info, usbvision->dev->dev.bus_id, | |
535 | sizeof(vc->bus_info)); | |
536 | vc->version = USBVISION_DRIVER_VERSION; | |
537 | vc->capabilities = V4L2_CAP_VIDEO_CAPTURE | | |
538 | V4L2_CAP_AUDIO | | |
539 | V4L2_CAP_READWRITE | | |
540 | V4L2_CAP_STREAMING | | |
541 | (usbvision->have_tuner ? V4L2_CAP_TUNER : 0); | |
542 | PDEBUG(DBG_IOCTL, "VIDIOC_QUERYCAP"); | |
543 | return 0; | |
544 | } | |
545 | case VIDIOC_ENUMINPUT: | |
546 | { | |
547 | struct v4l2_input *vi = arg; | |
548 | int chan; | |
549 | ||
550 | if ((vi->index >= usbvision->video_inputs) || (vi->index < 0) ) | |
551 | return -EINVAL; | |
552 | if (usbvision->have_tuner) { | |
553 | chan = vi->index; | |
554 | } | |
555 | else { | |
556 | chan = vi->index + 1; //skip Television string | |
557 | } | |
558 | switch(chan) { | |
559 | case 0: | |
560 | if (usbvision_device_data[usbvision->DevModel].VideoChannels == 4) { | |
561 | strcpy(vi->name, "White Video Input"); | |
562 | } | |
563 | else { | |
564 | strcpy(vi->name, "Television"); | |
565 | vi->type = V4L2_INPUT_TYPE_TUNER; | |
566 | vi->audioset = 1; | |
567 | vi->tuner = chan; | |
568 | vi->std = V4L2_STD_PAL | V4L2_STD_NTSC | V4L2_STD_SECAM; | |
569 | } | |
570 | break; | |
571 | case 1: | |
572 | vi->type = V4L2_INPUT_TYPE_CAMERA; | |
573 | if (usbvision_device_data[usbvision->DevModel].VideoChannels == 4) { | |
574 | strcpy(vi->name, "Green Video Input"); | |
575 | } | |
576 | else { | |
577 | strcpy(vi->name, "Composite Video Input"); | |
578 | } | |
579 | vi->std = V4L2_STD_PAL; | |
580 | break; | |
581 | case 2: | |
582 | vi->type = V4L2_INPUT_TYPE_CAMERA; | |
583 | if (usbvision_device_data[usbvision->DevModel].VideoChannels == 4) { | |
584 | strcpy(vi->name, "Yellow Video Input"); | |
585 | } | |
586 | else { | |
587 | strcpy(vi->name, "S-Video Input"); | |
588 | } | |
589 | vi->std = V4L2_STD_PAL; | |
590 | break; | |
591 | case 3: | |
592 | vi->type = V4L2_INPUT_TYPE_CAMERA; | |
593 | strcpy(vi->name, "Red Video Input"); | |
594 | vi->std = V4L2_STD_PAL; | |
595 | break; | |
596 | } | |
597 | PDEBUG(DBG_IOCTL, "VIDIOC_ENUMINPUT name=%s:%d tuners=%d type=%d norm=%x", | |
598 | vi->name, vi->index, vi->tuner,vi->type,(int)vi->std); | |
599 | return 0; | |
600 | } | |
601 | case VIDIOC_ENUMSTD: | |
602 | { | |
603 | struct v4l2_standard *e = arg; | |
604 | unsigned int i; | |
605 | int ret; | |
606 | ||
607 | i = e->index; | |
608 | if (i >= TVNORMS) | |
609 | return -EINVAL; | |
610 | ret = v4l2_video_std_construct(e, tvnorms[e->index].id, | |
611 | tvnorms[e->index].name); | |
612 | e->index = i; | |
613 | if (ret < 0) | |
614 | return ret; | |
615 | return 0; | |
616 | } | |
617 | case VIDIOC_G_INPUT: | |
618 | { | |
619 | int *input = arg; | |
620 | *input = usbvision->ctl_input; | |
621 | return 0; | |
622 | } | |
623 | case VIDIOC_S_INPUT: | |
624 | { | |
625 | int *input = arg; | |
626 | if ((*input >= usbvision->video_inputs) || (*input < 0) ) | |
627 | return -EINVAL; | |
628 | usbvision->ctl_input = *input; | |
629 | ||
630 | down(&usbvision->lock); | |
631 | usbvision_muxsel(usbvision, usbvision->ctl_input); | |
632 | usbvision_set_input(usbvision); | |
633 | usbvision_set_output(usbvision, usbvision->curwidth, usbvision->curheight); | |
634 | up(&usbvision->lock); | |
635 | return 0; | |
636 | } | |
637 | case VIDIOC_G_STD: | |
638 | { | |
639 | v4l2_std_id *id = arg; | |
640 | ||
641 | *id = usbvision->tvnorm->id; | |
642 | ||
643 | PDEBUG(DBG_IOCTL, "VIDIOC_G_STD std_id=%s", usbvision->tvnorm->name); | |
644 | return 0; | |
645 | } | |
646 | case VIDIOC_S_STD: | |
647 | { | |
648 | v4l2_std_id *id = arg; | |
649 | unsigned int i; | |
650 | ||
651 | for (i = 0; i < TVNORMS; i++) | |
652 | if (*id == tvnorms[i].id) | |
653 | break; | |
654 | if (i == TVNORMS) | |
655 | for (i = 0; i < TVNORMS; i++) | |
656 | if (*id & tvnorms[i].id) | |
657 | break; | |
658 | if (i == TVNORMS) | |
659 | return -EINVAL; | |
660 | ||
661 | down(&usbvision->lock); | |
662 | usbvision->tvnorm = &tvnorms[i]; | |
663 | ||
664 | call_i2c_clients(usbvision, VIDIOC_S_STD, | |
665 | &usbvision->tvnorm->id); | |
666 | ||
667 | up(&usbvision->lock); | |
668 | ||
669 | PDEBUG(DBG_IOCTL, "VIDIOC_S_STD std_id=%s", usbvision->tvnorm->name); | |
670 | return 0; | |
671 | } | |
672 | case VIDIOC_G_TUNER: | |
673 | { | |
674 | struct v4l2_tuner *vt = arg; | |
675 | ||
676 | if (!usbvision->have_tuner || vt->index) // Only tuner 0 | |
677 | return -EINVAL; | |
678 | strcpy(vt->name, "Television"); | |
679 | /* Let clients fill in the remainder of this struct */ | |
680 | call_i2c_clients(usbvision,VIDIOC_G_TUNER,vt); | |
681 | ||
682 | PDEBUG(DBG_IOCTL, "VIDIOC_G_TUNER signal=%x, afc=%x",vt->signal,vt->afc); | |
683 | return 0; | |
684 | } | |
685 | case VIDIOC_S_TUNER: | |
686 | { | |
687 | struct v4l2_tuner *vt = arg; | |
688 | ||
689 | // Only no or one tuner for now | |
690 | if (!usbvision->have_tuner || vt->index) | |
691 | return -EINVAL; | |
692 | /* let clients handle this */ | |
693 | call_i2c_clients(usbvision,VIDIOC_S_TUNER,vt); | |
694 | ||
695 | PDEBUG(DBG_IOCTL, "VIDIOC_S_TUNER"); | |
696 | return 0; | |
697 | } | |
698 | case VIDIOC_G_FREQUENCY: | |
699 | { | |
700 | struct v4l2_frequency *freq = arg; | |
701 | ||
702 | freq->tuner = 0; // Only one tuner | |
703 | freq->type = V4L2_TUNER_ANALOG_TV; | |
704 | freq->frequency = usbvision->freq; | |
705 | PDEBUG(DBG_IOCTL, "VIDIOC_G_FREQUENCY freq=0x%X", (unsigned)freq->frequency); | |
706 | return 0; | |
707 | } | |
708 | case VIDIOC_S_FREQUENCY: | |
709 | { | |
710 | struct v4l2_frequency *freq = arg; | |
711 | ||
712 | // Only no or one tuner for now | |
713 | if (!usbvision->have_tuner || freq->tuner) | |
714 | return -EINVAL; | |
715 | ||
716 | usbvision->freq = freq->frequency; | |
717 | call_i2c_clients(usbvision, cmd, freq); | |
718 | PDEBUG(DBG_IOCTL, "VIDIOC_S_FREQUENCY freq=0x%X", (unsigned)freq->frequency); | |
719 | return 0; | |
720 | } | |
721 | case VIDIOC_G_AUDIO: | |
722 | { | |
723 | struct v4l2_audio *v = arg; | |
724 | memset(v,0, sizeof(v)); | |
725 | strcpy(v->name, "TV"); | |
726 | PDEBUG(DBG_IOCTL, "VIDIOC_G_AUDIO"); | |
727 | return 0; | |
728 | } | |
729 | case VIDIOC_S_AUDIO: | |
730 | { | |
731 | struct v4l2_audio *v = arg; | |
732 | if(v->index) { | |
733 | return -EINVAL; | |
734 | } | |
735 | PDEBUG(DBG_IOCTL, "VIDIOC_S_AUDIO"); | |
736 | return 0; | |
737 | } | |
738 | case VIDIOC_QUERYCTRL: | |
739 | { | |
740 | struct v4l2_queryctrl *ctrl = arg; | |
741 | int id=ctrl->id; | |
742 | ||
743 | memset(ctrl,0,sizeof(*ctrl)); | |
744 | ctrl->id=id; | |
745 | ||
746 | call_i2c_clients(usbvision, cmd, arg); | |
747 | ||
748 | if (ctrl->type) | |
749 | return 0; | |
750 | else | |
751 | return -EINVAL; | |
752 | ||
753 | PDEBUG(DBG_IOCTL,"VIDIOC_QUERYCTRL id=%x value=%x",ctrl->id,ctrl->type); | |
754 | } | |
755 | case VIDIOC_G_CTRL: | |
756 | { | |
757 | struct v4l2_control *ctrl = arg; | |
758 | PDEBUG(DBG_IOCTL,"VIDIOC_G_CTRL id=%x value=%x",ctrl->id,ctrl->value); | |
759 | call_i2c_clients(usbvision, VIDIOC_G_CTRL, ctrl); | |
760 | return 0; | |
761 | } | |
762 | case VIDIOC_S_CTRL: | |
763 | { | |
764 | struct v4l2_control *ctrl = arg; | |
765 | ||
766 | PDEBUG(DBG_IOCTL, "VIDIOC_S_CTRL id=%x value=%x",ctrl->id,ctrl->value); | |
767 | call_i2c_clients(usbvision, VIDIOC_S_CTRL, ctrl); | |
768 | return 0; | |
769 | } | |
770 | case VIDIOC_REQBUFS: | |
771 | { | |
772 | struct v4l2_requestbuffers *vr = arg; | |
773 | int ret; | |
774 | ||
775 | RESTRICT_TO_RANGE(vr->count,1,USBVISION_NUMFRAMES); | |
776 | ||
777 | // Check input validity : the user must do a VIDEO CAPTURE and MMAP method. | |
778 | if((vr->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) || | |
779 | (vr->memory != V4L2_MEMORY_MMAP)) | |
780 | return -EINVAL; | |
781 | ||
782 | if(usbvision->streaming == Stream_On) { | |
783 | if ((ret = usbvision_stream_interrupt(usbvision))) | |
784 | return ret; | |
785 | } | |
786 | ||
787 | usbvision_empty_framequeues(usbvision); | |
788 | ||
789 | usbvision->curFrame = NULL; | |
790 | ||
791 | PDEBUG(DBG_IOCTL, "VIDIOC_REQBUFS count=%d",vr->count); | |
792 | return 0; | |
793 | } | |
794 | case VIDIOC_QUERYBUF: | |
795 | { | |
796 | struct v4l2_buffer *vb = arg; | |
797 | struct usbvision_frame *frame; | |
798 | ||
799 | // FIXME : must control that buffers are mapped (VIDIOC_REQBUFS has been called) | |
800 | ||
801 | if(vb->type != V4L2_CAP_VIDEO_CAPTURE) { | |
802 | return -EINVAL; | |
803 | } | |
804 | if(vb->index>=USBVISION_NUMFRAMES) { | |
805 | return -EINVAL; | |
806 | } | |
807 | // Updating the corresponding frame state | |
808 | vb->flags = 0; | |
809 | frame = &usbvision->frame[vb->index]; | |
810 | if(frame->grabstate >= FrameState_Ready) | |
811 | vb->flags |= V4L2_BUF_FLAG_QUEUED; | |
812 | if(frame->grabstate >= FrameState_Done) | |
813 | vb->flags |= V4L2_BUF_FLAG_DONE; | |
814 | if(frame->grabstate == FrameState_Unused) | |
815 | vb->flags |= V4L2_BUF_FLAG_MAPPED; | |
816 | vb->memory = V4L2_MEMORY_MMAP; | |
817 | ||
818 | vb->m.offset = vb->index*usbvision->max_frame_size; | |
819 | ||
820 | vb->memory = V4L2_MEMORY_MMAP; | |
821 | vb->field = V4L2_FIELD_NONE; | |
c876a346 | 822 | vb->length = usbvision->curwidth*usbvision->curheight*usbvision->palette.bytes_per_pixel; |
483dfdb6 TM |
823 | vb->timestamp = usbvision->frame[vb->index].timestamp; |
824 | vb->sequence = usbvision->frame[vb->index].sequence; | |
825 | return 0; | |
826 | } | |
827 | case VIDIOC_QBUF: | |
828 | { | |
829 | struct v4l2_buffer *vb = arg; | |
830 | struct usbvision_frame *frame; | |
831 | unsigned long lock_flags; | |
832 | ||
833 | // FIXME : works only on VIDEO_CAPTURE MODE, MMAP. | |
834 | if(vb->type != V4L2_CAP_VIDEO_CAPTURE) { | |
835 | return -EINVAL; | |
836 | } | |
837 | if(vb->index>=USBVISION_NUMFRAMES) { | |
838 | return -EINVAL; | |
839 | } | |
840 | ||
841 | frame = &usbvision->frame[vb->index]; | |
842 | ||
843 | if (frame->grabstate != FrameState_Unused) { | |
844 | return -EAGAIN; | |
845 | } | |
846 | ||
847 | /* Mark it as ready and enqueue frame */ | |
848 | frame->grabstate = FrameState_Ready; | |
849 | frame->scanstate = ScanState_Scanning; | |
850 | frame->scanlength = 0; /* Accumulated in usbvision_parse_data() */ | |
851 | ||
852 | vb->flags &= ~V4L2_BUF_FLAG_DONE; | |
853 | ||
854 | /* set v4l2_format index */ | |
855 | frame->v4l2_format = usbvision->palette; | |
856 | ||
857 | spin_lock_irqsave(&usbvision->queue_lock, lock_flags); | |
858 | list_add_tail(&usbvision->frame[vb->index].frame, &usbvision->inqueue); | |
859 | spin_unlock_irqrestore(&usbvision->queue_lock, lock_flags); | |
860 | ||
861 | PDEBUG(DBG_IOCTL, "VIDIOC_QBUF frame #%d",vb->index); | |
862 | return 0; | |
863 | } | |
864 | case VIDIOC_DQBUF: | |
865 | { | |
866 | struct v4l2_buffer *vb = arg; | |
867 | int ret; | |
868 | struct usbvision_frame *f; | |
869 | unsigned long lock_flags; | |
870 | ||
871 | if (vb->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) | |
872 | return -EINVAL; | |
873 | ||
874 | if (list_empty(&(usbvision->outqueue))) { | |
875 | if (usbvision->streaming == Stream_Idle) | |
876 | return -EINVAL; | |
877 | ret = wait_event_interruptible | |
878 | (usbvision->wait_frame, | |
879 | !list_empty(&(usbvision->outqueue))); | |
880 | if (ret) | |
881 | return ret; | |
882 | } | |
883 | ||
884 | spin_lock_irqsave(&usbvision->queue_lock, lock_flags); | |
885 | f = list_entry(usbvision->outqueue.next, | |
886 | struct usbvision_frame, frame); | |
887 | list_del(usbvision->outqueue.next); | |
888 | spin_unlock_irqrestore(&usbvision->queue_lock, lock_flags); | |
889 | ||
890 | f->grabstate = FrameState_Unused; | |
891 | ||
892 | vb->memory = V4L2_MEMORY_MMAP; | |
893 | vb->flags = V4L2_BUF_FLAG_MAPPED | V4L2_BUF_FLAG_QUEUED | V4L2_BUF_FLAG_DONE; | |
894 | vb->index = f->index; | |
895 | vb->sequence = f->sequence; | |
896 | vb->timestamp = f->timestamp; | |
897 | vb->field = V4L2_FIELD_NONE; | |
898 | vb->bytesused = f->scanlength; | |
899 | ||
900 | return 0; | |
901 | } | |
902 | case VIDIOC_STREAMON: | |
903 | { | |
904 | int b=V4L2_BUF_TYPE_VIDEO_CAPTURE; | |
905 | ||
906 | usbvision->streaming = Stream_On; | |
907 | ||
908 | call_i2c_clients(usbvision,VIDIOC_STREAMON , &b); | |
909 | ||
910 | PDEBUG(DBG_IOCTL, "VIDIOC_STREAMON"); | |
911 | ||
912 | return 0; | |
913 | } | |
914 | case VIDIOC_STREAMOFF: | |
915 | { | |
916 | int *type = arg; | |
917 | int b=V4L2_BUF_TYPE_VIDEO_CAPTURE; | |
918 | ||
919 | if (*type != V4L2_BUF_TYPE_VIDEO_CAPTURE) | |
920 | return -EINVAL; | |
921 | ||
922 | if(usbvision->streaming == Stream_On) { | |
923 | usbvision_stream_interrupt(usbvision); | |
924 | // Stop all video streamings | |
925 | call_i2c_clients(usbvision,VIDIOC_STREAMOFF , &b); | |
926 | } | |
927 | usbvision_empty_framequeues(usbvision); | |
928 | ||
929 | PDEBUG(DBG_IOCTL, "VIDIOC_STREAMOFF"); | |
930 | return 0; | |
931 | } | |
932 | case VIDIOC_ENUM_FMT: | |
933 | { | |
934 | struct v4l2_fmtdesc *vfd = arg; | |
935 | ||
936 | if(vfd->index>=USBVISION_SUPPORTED_PALETTES-1) { | |
937 | return -EINVAL; | |
938 | } | |
939 | vfd->flags = 0; | |
940 | vfd->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; | |
941 | strcpy(vfd->description,usbvision_v4l2_format[vfd->index].desc); | |
942 | vfd->pixelformat = usbvision_v4l2_format[vfd->index].format; | |
943 | memset(vfd->reserved, 0, sizeof(vfd->reserved)); | |
944 | return 0; | |
945 | } | |
946 | case VIDIOC_G_FMT: | |
947 | { | |
948 | struct v4l2_format *vf = arg; | |
949 | ||
950 | switch (vf->type) { | |
951 | case V4L2_BUF_TYPE_VIDEO_CAPTURE: | |
952 | { | |
953 | vf->fmt.pix.width = usbvision->curwidth; | |
954 | vf->fmt.pix.height = usbvision->curheight; | |
955 | vf->fmt.pix.pixelformat = usbvision->palette.format; | |
956 | vf->fmt.pix.bytesperline = usbvision->curwidth*usbvision->palette.bytes_per_pixel; | |
957 | vf->fmt.pix.sizeimage = vf->fmt.pix.bytesperline*usbvision->curheight; | |
958 | vf->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; | |
959 | vf->fmt.pix.field = V4L2_FIELD_NONE; /* Always progressive image */ | |
c876a346 TM |
960 | PDEBUG(DBG_IOCTL, "VIDIOC_G_FMT w=%d, h=%d, format=%s", |
961 | vf->fmt.pix.width, vf->fmt.pix.height,usbvision->palette.desc); | |
962 | return 0; | |
483dfdb6 | 963 | } |
483dfdb6 TM |
964 | default: |
965 | PDEBUG(DBG_IOCTL, "VIDIOC_G_FMT invalid type %d",vf->type); | |
966 | return -EINVAL; | |
967 | } | |
483dfdb6 TM |
968 | return 0; |
969 | } | |
970 | case VIDIOC_TRY_FMT: | |
971 | case VIDIOC_S_FMT: | |
972 | { | |
973 | struct v4l2_format *vf = arg; | |
974 | int formatIdx,ret; | |
975 | ||
976 | switch(vf->type) { | |
977 | case V4L2_BUF_TYPE_VIDEO_CAPTURE: | |
978 | { | |
979 | /* Find requested format in available ones */ | |
980 | for(formatIdx=0;formatIdx<USBVISION_SUPPORTED_PALETTES;formatIdx++) { | |
981 | if(vf->fmt.pix.pixelformat == usbvision_v4l2_format[formatIdx].format) { | |
982 | usbvision->palette = usbvision_v4l2_format[formatIdx]; | |
983 | break; | |
984 | } | |
985 | } | |
986 | /* robustness */ | |
987 | if(formatIdx == USBVISION_SUPPORTED_PALETTES) { | |
988 | return -EINVAL; | |
989 | } | |
990 | RESTRICT_TO_RANGE(vf->fmt.pix.width, MIN_FRAME_WIDTH, MAX_FRAME_WIDTH); | |
991 | RESTRICT_TO_RANGE(vf->fmt.pix.height, MIN_FRAME_HEIGHT, MAX_FRAME_HEIGHT); | |
992 | ||
c876a346 TM |
993 | vf->fmt.pix.bytesperline = vf->fmt.pix.width*usbvision->palette.bytes_per_pixel; |
994 | vf->fmt.pix.sizeimage = vf->fmt.pix.bytesperline*vf->fmt.pix.height; | |
995 | ||
996 | if(cmd == VIDIOC_TRY_FMT) { | |
997 | PDEBUG(DBG_IOCTL, "VIDIOC_TRY_FMT grabdisplay w=%d, h=%d, format=%s", | |
998 | vf->fmt.pix.width, vf->fmt.pix.height,usbvision->palette.desc); | |
999 | return 0; | |
1000 | } | |
1001 | ||
483dfdb6 TM |
1002 | /* stop io in case it is already in progress */ |
1003 | if(usbvision->streaming == Stream_On) { | |
1004 | if ((ret = usbvision_stream_interrupt(usbvision))) | |
1005 | return ret; | |
1006 | } | |
1007 | usbvision_empty_framequeues(usbvision); | |
1008 | ||
1009 | usbvision->curFrame = NULL; | |
1010 | ||
1011 | // by now we are committed to the new data... | |
1012 | down(&usbvision->lock); | |
1013 | usbvision_set_output(usbvision, vf->fmt.pix.width, vf->fmt.pix.height); | |
1014 | up(&usbvision->lock); | |
1015 | ||
1016 | PDEBUG(DBG_IOCTL, "VIDIOC_S_FMT grabdisplay w=%d, h=%d, format=%s", | |
1017 | vf->fmt.pix.width, vf->fmt.pix.height,usbvision->palette.desc); | |
1018 | return 0; | |
1019 | } | |
1020 | default: | |
1021 | return -EINVAL; | |
1022 | } | |
1023 | } | |
1024 | default: | |
1025 | return -ENOIOCTLCMD; | |
1026 | } | |
1027 | return 0; | |
1028 | } | |
1029 | ||
1030 | static int usbvision_v4l2_ioctl(struct inode *inode, struct file *file, | |
1031 | unsigned int cmd, unsigned long arg) | |
1032 | { | |
1033 | return video_usercopy(inode, file, cmd, arg, usbvision_v4l2_do_ioctl); | |
1034 | } | |
1035 | ||
1036 | ||
1037 | static ssize_t usbvision_v4l2_read(struct file *file, char *buf, | |
1038 | size_t count, loff_t *ppos) | |
1039 | { | |
1040 | struct video_device *dev = video_devdata(file); | |
1041 | struct usb_usbvision *usbvision = (struct usb_usbvision *) video_get_drvdata(dev); | |
1042 | int noblock = file->f_flags & O_NONBLOCK; | |
1043 | unsigned long lock_flags; | |
1044 | ||
1045 | int frmx = -1; | |
1046 | int ret,i; | |
1047 | struct usbvision_frame *frame; | |
1048 | ||
1049 | PDEBUG(DBG_IO, "%s: %ld bytes, noblock=%d", __FUNCTION__, (unsigned long)count, noblock); | |
1050 | ||
1051 | if (!USBVISION_IS_OPERATIONAL(usbvision) || (buf == NULL)) | |
1052 | return -EFAULT; | |
1053 | ||
1054 | /* no stream is running, make it running ! */ | |
1055 | usbvision->streaming = Stream_On; | |
1056 | call_i2c_clients(usbvision,VIDIOC_STREAMON , NULL); | |
1057 | ||
1058 | /* First, enqueue as many frames as possible (like a user of VIDIOC_QBUF would do) */ | |
1059 | for(i=0;i<USBVISION_NUMFRAMES;i++) { | |
1060 | frame = &usbvision->frame[i]; | |
1061 | if(frame->grabstate == FrameState_Unused) { | |
1062 | /* Mark it as ready and enqueue frame */ | |
1063 | frame->grabstate = FrameState_Ready; | |
1064 | frame->scanstate = ScanState_Scanning; | |
1065 | frame->scanlength = 0; /* Accumulated in usbvision_parse_data() */ | |
1066 | ||
1067 | /* set v4l2_format index */ | |
1068 | frame->v4l2_format = usbvision->palette; | |
1069 | ||
1070 | spin_lock_irqsave(&usbvision->queue_lock, lock_flags); | |
1071 | list_add_tail(&frame->frame, &usbvision->inqueue); | |
1072 | spin_unlock_irqrestore(&usbvision->queue_lock, lock_flags); | |
1073 | } | |
1074 | } | |
1075 | ||
1076 | /* Then try to steal a frame (like a VIDIOC_DQBUF would do) */ | |
1077 | if (list_empty(&(usbvision->outqueue))) { | |
1078 | if(noblock) | |
1079 | return -EAGAIN; | |
1080 | ||
1081 | ret = wait_event_interruptible | |
1082 | (usbvision->wait_frame, | |
1083 | !list_empty(&(usbvision->outqueue))); | |
1084 | if (ret) | |
1085 | return ret; | |
1086 | } | |
1087 | ||
1088 | spin_lock_irqsave(&usbvision->queue_lock, lock_flags); | |
1089 | frame = list_entry(usbvision->outqueue.next, | |
1090 | struct usbvision_frame, frame); | |
1091 | list_del(usbvision->outqueue.next); | |
1092 | spin_unlock_irqrestore(&usbvision->queue_lock, lock_flags); | |
1093 | ||
1094 | /* An error returns an empty frame */ | |
1095 | if (frame->grabstate == FrameState_Error) { | |
1096 | frame->bytes_read = 0; | |
1097 | return 0; | |
1098 | } | |
1099 | ||
1100 | PDEBUG(DBG_IO, "%s: frmx=%d, bytes_read=%ld, scanlength=%ld", __FUNCTION__, | |
1101 | frame->index, frame->bytes_read, frame->scanlength); | |
1102 | ||
1103 | /* copy bytes to user space; we allow for partials reads */ | |
1104 | if ((count + frame->bytes_read) > (unsigned long)frame->scanlength) | |
1105 | count = frame->scanlength - frame->bytes_read; | |
1106 | ||
1107 | if (copy_to_user(buf, frame->data + frame->bytes_read, count)) { | |
1108 | return -EFAULT; | |
1109 | } | |
1110 | ||
1111 | frame->bytes_read += count; | |
1112 | PDEBUG(DBG_IO, "%s: {copy} count used=%ld, new bytes_read=%ld", __FUNCTION__, | |
1113 | (unsigned long)count, frame->bytes_read); | |
1114 | ||
1115 | // For now, forget the frame if it has not been read in one shot. | |
1116 | /* if (frame->bytes_read >= frame->scanlength) {// All data has been read */ | |
1117 | frame->bytes_read = 0; | |
1118 | ||
1119 | /* Mark it as available to be used again. */ | |
1120 | usbvision->frame[frmx].grabstate = FrameState_Unused; | |
1121 | /* } */ | |
1122 | ||
1123 | return count; | |
1124 | } | |
1125 | ||
1126 | static int usbvision_v4l2_mmap(struct file *file, struct vm_area_struct *vma) | |
1127 | { | |
1128 | unsigned long size = vma->vm_end - vma->vm_start, | |
1129 | start = vma->vm_start; | |
1130 | void *pos; | |
1131 | u32 i; | |
1132 | ||
1133 | struct video_device *dev = video_devdata(file); | |
1134 | struct usb_usbvision *usbvision = (struct usb_usbvision *) video_get_drvdata(dev); | |
1135 | ||
1136 | down(&usbvision->lock); | |
1137 | ||
1138 | if (!USBVISION_IS_OPERATIONAL(usbvision)) { | |
1139 | up(&usbvision->lock); | |
1140 | return -EFAULT; | |
1141 | } | |
1142 | ||
1143 | if (!(vma->vm_flags & VM_WRITE) || | |
c876a346 | 1144 | size != PAGE_ALIGN(usbvision->curwidth*usbvision->curheight*usbvision->palette.bytes_per_pixel)) { |
483dfdb6 TM |
1145 | up(&usbvision->lock); |
1146 | return -EINVAL; | |
1147 | } | |
1148 | ||
1149 | for (i = 0; i < USBVISION_NUMFRAMES; i++) { | |
1150 | if (((usbvision->max_frame_size*i) >> PAGE_SHIFT) == vma->vm_pgoff) | |
1151 | break; | |
1152 | } | |
1153 | if (i == USBVISION_NUMFRAMES) { | |
c876a346 | 1154 | PDEBUG(DBG_MMAP, "mmap: user supplied mapping address is out of range"); |
483dfdb6 TM |
1155 | up(&usbvision->lock); |
1156 | return -EINVAL; | |
1157 | } | |
1158 | ||
1159 | /* VM_IO is eventually going to replace PageReserved altogether */ | |
1160 | vma->vm_flags |= VM_IO; | |
1161 | vma->vm_flags |= VM_RESERVED; /* avoid to swap out this VMA */ | |
1162 | ||
1163 | pos = usbvision->frame[i].data; | |
1164 | while (size > 0) { | |
1165 | ||
1166 | if (vm_insert_page(vma, start, vmalloc_to_page(pos))) { | |
c876a346 | 1167 | PDEBUG(DBG_MMAP, "mmap: vm_insert_page failed"); |
483dfdb6 TM |
1168 | up(&usbvision->lock); |
1169 | return -EAGAIN; | |
1170 | } | |
1171 | start += PAGE_SIZE; | |
1172 | pos += PAGE_SIZE; | |
1173 | size -= PAGE_SIZE; | |
1174 | } | |
1175 | ||
1176 | up(&usbvision->lock); | |
1177 | return 0; | |
1178 | } | |
1179 | ||
1180 | ||
1181 | /* | |
1182 | * Here comes the stuff for radio on usbvision based devices | |
1183 | * | |
1184 | */ | |
1185 | static int usbvision_radio_open(struct inode *inode, struct file *file) | |
1186 | { | |
1187 | struct video_device *dev = video_devdata(file); | |
1188 | struct usb_usbvision *usbvision = (struct usb_usbvision *) video_get_drvdata(dev); | |
1189 | struct v4l2_frequency freq; | |
1190 | int errCode = 0; | |
1191 | ||
1192 | PDEBUG(DBG_IO, "%s:", __FUNCTION__); | |
1193 | ||
1194 | down(&usbvision->lock); | |
1195 | ||
1196 | if (usbvision->user) { | |
1197 | err("%s: Someone tried to open an already opened USBVision Radio!", __FUNCTION__); | |
1198 | errCode = -EBUSY; | |
1199 | } | |
1200 | else { | |
1201 | if(PowerOnAtOpen) { | |
1202 | usbvision_reset_powerOffTimer(usbvision); | |
1203 | if (usbvision->power == 0) { | |
1204 | usbvision_power_on(usbvision); | |
1205 | usbvision_init_i2c(usbvision); | |
1206 | } | |
1207 | } | |
1208 | ||
1209 | // If so far no errors then we shall start the radio | |
1210 | usbvision->radio = 1; | |
1211 | call_i2c_clients(usbvision,AUDC_SET_RADIO,&usbvision->tuner_type); | |
1212 | freq.frequency = 1517; //SWR3 @ 94.8MHz | |
1213 | call_i2c_clients(usbvision, VIDIOC_S_FREQUENCY, &freq); | |
1214 | usbvision_set_audio(usbvision, USBVISION_AUDIO_RADIO); | |
1215 | usbvision->user++; | |
1216 | } | |
1217 | ||
1218 | if (errCode) { | |
1219 | if (PowerOnAtOpen) { | |
1220 | usbvision_i2c_usb_del_bus(&usbvision->i2c_adap); | |
1221 | usbvision_power_off(usbvision); | |
1222 | usbvision->initialized = 0; | |
1223 | } | |
1224 | } | |
1225 | up(&usbvision->lock); | |
1226 | return errCode; | |
1227 | } | |
1228 | ||
1229 | ||
1230 | static int usbvision_radio_close(struct inode *inode, struct file *file) | |
1231 | { | |
1232 | struct video_device *dev = video_devdata(file); | |
1233 | struct usb_usbvision *usbvision = (struct usb_usbvision *) video_get_drvdata(dev); | |
1234 | int errCode = 0; | |
1235 | ||
1236 | PDEBUG(DBG_IO, ""); | |
1237 | ||
1238 | down(&usbvision->lock); | |
1239 | ||
1240 | usbvision_audio_off(usbvision); | |
1241 | usbvision->radio=0; | |
1242 | usbvision->user--; | |
1243 | ||
1244 | if (PowerOnAtOpen) { | |
1245 | usbvision_set_powerOffTimer(usbvision); | |
1246 | usbvision->initialized = 0; | |
1247 | } | |
1248 | ||
1249 | up(&usbvision->lock); | |
1250 | ||
1251 | if (usbvision->remove_pending) { | |
1252 | info("%s: Final disconnect", __FUNCTION__); | |
1253 | usbvision_release(usbvision); | |
1254 | } | |
1255 | ||
1256 | ||
1257 | PDEBUG(DBG_IO, "success"); | |
1258 | ||
1259 | return errCode; | |
1260 | } | |
1261 | ||
1262 | static int usbvision_do_radio_ioctl(struct inode *inode, struct file *file, | |
1263 | unsigned int cmd, void *arg) | |
1264 | { | |
1265 | struct video_device *dev = video_devdata(file); | |
1266 | struct usb_usbvision *usbvision = (struct usb_usbvision *) video_get_drvdata(dev); | |
1267 | ||
1268 | if (!USBVISION_IS_OPERATIONAL(usbvision)) | |
1269 | return -EIO; | |
1270 | ||
1271 | switch (cmd) { | |
1272 | case VIDIOC_QUERYCAP: | |
1273 | { | |
1274 | struct v4l2_capability *vc=arg; | |
1275 | ||
1276 | memset(vc, 0, sizeof(*vc)); | |
1277 | strlcpy(vc->driver, "USBVision", sizeof(vc->driver)); | |
1278 | strlcpy(vc->card, usbvision_device_data[usbvision->DevModel].ModelString, | |
1279 | sizeof(vc->card)); | |
1280 | strlcpy(vc->bus_info, usbvision->dev->dev.bus_id, | |
1281 | sizeof(vc->bus_info)); | |
1282 | vc->version = USBVISION_DRIVER_VERSION; | |
1283 | vc->capabilities = (usbvision->have_tuner ? V4L2_CAP_TUNER : 0); | |
1284 | PDEBUG(DBG_IO, "VIDIOC_QUERYCAP"); | |
1285 | return 0; | |
1286 | } | |
1287 | case VIDIOC_QUERYCTRL: | |
1288 | { | |
1289 | struct v4l2_queryctrl *ctrl = arg; | |
1290 | int id=ctrl->id; | |
1291 | ||
1292 | memset(ctrl,0,sizeof(*ctrl)); | |
1293 | ctrl->id=id; | |
1294 | ||
1295 | call_i2c_clients(usbvision, cmd, arg); | |
1296 | PDEBUG(DBG_IO,"VIDIOC_QUERYCTRL id=%x value=%x",ctrl->id,ctrl->type); | |
1297 | ||
1298 | if (ctrl->type) | |
1299 | return 0; | |
1300 | else | |
1301 | return -EINVAL; | |
1302 | ||
1303 | } | |
1304 | case VIDIOC_G_CTRL: | |
1305 | { | |
1306 | struct v4l2_control *ctrl = arg; | |
1307 | ||
1308 | call_i2c_clients(usbvision, VIDIOC_G_CTRL, ctrl); | |
1309 | PDEBUG(DBG_IO,"VIDIOC_G_CTRL id=%x value=%x",ctrl->id,ctrl->value); | |
1310 | return 0; | |
1311 | } | |
1312 | case VIDIOC_S_CTRL: | |
1313 | { | |
1314 | struct v4l2_control *ctrl = arg; | |
1315 | ||
1316 | call_i2c_clients(usbvision, VIDIOC_S_CTRL, ctrl); | |
1317 | PDEBUG(DBG_IO, "VIDIOC_S_CTRL id=%x value=%x",ctrl->id,ctrl->value); | |
1318 | return 0; | |
1319 | } | |
1320 | case VIDIOC_G_TUNER: | |
1321 | { | |
1322 | struct v4l2_tuner *t = arg; | |
1323 | ||
1324 | if (t->index > 0) | |
1325 | return -EINVAL; | |
1326 | ||
1327 | memset(t,0,sizeof(*t)); | |
1328 | strcpy(t->name, "Radio"); | |
1329 | t->type = V4L2_TUNER_RADIO; | |
1330 | ||
1331 | /* Let clients fill in the remainder of this struct */ | |
1332 | call_i2c_clients(usbvision,VIDIOC_G_TUNER,t); | |
1333 | PDEBUG(DBG_IO, "VIDIOC_G_TUNER signal=%x, afc=%x",t->signal,t->afc); | |
1334 | return 0; | |
1335 | } | |
1336 | case VIDIOC_S_TUNER: | |
1337 | { | |
1338 | struct v4l2_tuner *vt = arg; | |
1339 | ||
1340 | // Only no or one tuner for now | |
1341 | if (!usbvision->have_tuner || vt->index) | |
1342 | return -EINVAL; | |
1343 | /* let clients handle this */ | |
1344 | call_i2c_clients(usbvision,VIDIOC_S_TUNER,vt); | |
1345 | ||
1346 | PDEBUG(DBG_IO, "VIDIOC_S_TUNER"); | |
1347 | return 0; | |
1348 | } | |
1349 | case VIDIOC_G_AUDIO: | |
1350 | { | |
1351 | struct v4l2_audio *a = arg; | |
1352 | ||
1353 | memset(a,0,sizeof(*a)); | |
1354 | strcpy(a->name,"Radio"); | |
1355 | PDEBUG(DBG_IO, "VIDIOC_G_AUDIO"); | |
1356 | return 0; | |
1357 | } | |
1358 | case VIDIOC_S_AUDIO: | |
1359 | case VIDIOC_S_INPUT: | |
1360 | case VIDIOC_S_STD: | |
1361 | return 0; | |
1362 | ||
1363 | case VIDIOC_G_FREQUENCY: | |
1364 | { | |
1365 | struct v4l2_frequency *f = arg; | |
1366 | ||
1367 | memset(f,0,sizeof(*f)); | |
1368 | ||
1369 | f->type = V4L2_TUNER_RADIO; | |
1370 | f->frequency = usbvision->freq; | |
1371 | call_i2c_clients(usbvision, cmd, f); | |
1372 | PDEBUG(DBG_IO, "VIDIOC_G_FREQUENCY freq=0x%X", (unsigned)f->frequency); | |
1373 | ||
1374 | return 0; | |
1375 | } | |
1376 | case VIDIOC_S_FREQUENCY: | |
1377 | { | |
1378 | struct v4l2_frequency *f = arg; | |
1379 | ||
1380 | if (f->tuner != 0) | |
1381 | return -EINVAL; | |
1382 | usbvision->freq = f->frequency; | |
1383 | call_i2c_clients(usbvision, cmd, f); | |
1384 | PDEBUG(DBG_IO, "VIDIOC_S_FREQUENCY freq=0x%X", (unsigned)f->frequency); | |
1385 | ||
1386 | return 0; | |
1387 | } | |
1388 | default: | |
1389 | { | |
1390 | PDEBUG(DBG_IO, "%s: Unknown command %x", __FUNCTION__, cmd); | |
1391 | return -ENOIOCTLCMD; | |
1392 | } | |
1393 | } | |
1394 | return 0; | |
1395 | } | |
1396 | ||
1397 | ||
1398 | static int usbvision_radio_ioctl(struct inode *inode, struct file *file, | |
1399 | unsigned int cmd, unsigned long arg) | |
1400 | { | |
1401 | return video_usercopy(inode, file, cmd, arg, usbvision_do_radio_ioctl); | |
1402 | } | |
1403 | ||
1404 | ||
1405 | /* | |
1406 | * Here comes the stuff for vbi on usbvision based devices | |
1407 | * | |
1408 | */ | |
1409 | static int usbvision_vbi_open(struct inode *inode, struct file *file) | |
1410 | { | |
1411 | /* TODO */ | |
1412 | return -EINVAL; | |
1413 | ||
1414 | } | |
1415 | ||
1416 | static int usbvision_vbi_close(struct inode *inode, struct file *file) | |
1417 | { | |
1418 | /* TODO */ | |
1419 | return -EINVAL; | |
1420 | } | |
1421 | ||
1422 | static int usbvision_do_vbi_ioctl(struct inode *inode, struct file *file, | |
1423 | unsigned int cmd, void *arg) | |
1424 | { | |
1425 | /* TODO */ | |
1426 | return -EINVAL; | |
1427 | } | |
1428 | ||
1429 | static int usbvision_vbi_ioctl(struct inode *inode, struct file *file, | |
1430 | unsigned int cmd, unsigned long arg) | |
1431 | { | |
1432 | return video_usercopy(inode, file, cmd, arg, usbvision_do_vbi_ioctl); | |
1433 | } | |
1434 | ||
1435 | ||
1436 | // | |
1437 | // Video registration stuff | |
1438 | // | |
1439 | ||
1440 | // Video template | |
1441 | static struct file_operations usbvision_fops = { | |
483dfdb6 | 1442 | .owner = THIS_MODULE, |
483dfdb6 TM |
1443 | .open = usbvision_v4l2_open, |
1444 | .release = usbvision_v4l2_close, | |
1445 | .read = usbvision_v4l2_read, | |
1446 | .mmap = usbvision_v4l2_mmap, | |
1447 | .ioctl = usbvision_v4l2_ioctl, | |
1448 | .llseek = no_llseek, | |
1449 | }; | |
1450 | static struct video_device usbvision_video_template = { | |
483dfdb6 | 1451 | .owner = THIS_MODULE, |
483dfdb6 TM |
1452 | .type = VID_TYPE_TUNER | VID_TYPE_CAPTURE, |
1453 | .hardware = VID_HARDWARE_USBVISION, | |
1454 | .fops = &usbvision_fops, | |
483dfdb6 TM |
1455 | .name = "usbvision-video", |
1456 | .release = video_device_release, | |
483dfdb6 TM |
1457 | .minor = -1, |
1458 | }; | |
1459 | ||
1460 | ||
1461 | // Radio template | |
1462 | static struct file_operations usbvision_radio_fops = { | |
483dfdb6 | 1463 | .owner = THIS_MODULE, |
483dfdb6 TM |
1464 | .open = usbvision_radio_open, |
1465 | .release = usbvision_radio_close, | |
1466 | .ioctl = usbvision_radio_ioctl, | |
1467 | .llseek = no_llseek, | |
1468 | }; | |
1469 | ||
1470 | static struct video_device usbvision_radio_template= | |
1471 | { | |
483dfdb6 | 1472 | .owner = THIS_MODULE, |
483dfdb6 TM |
1473 | .type = VID_TYPE_TUNER, |
1474 | .hardware = VID_HARDWARE_USBVISION, | |
1475 | .fops = &usbvision_radio_fops, | |
483dfdb6 TM |
1476 | .release = video_device_release, |
1477 | .name = "usbvision-radio", | |
483dfdb6 TM |
1478 | .minor = -1, |
1479 | }; | |
1480 | ||
1481 | ||
1482 | // vbi template | |
1483 | static struct file_operations usbvision_vbi_fops = { | |
483dfdb6 | 1484 | .owner = THIS_MODULE, |
483dfdb6 TM |
1485 | .open = usbvision_vbi_open, |
1486 | .release = usbvision_vbi_close, | |
1487 | .ioctl = usbvision_vbi_ioctl, | |
1488 | .llseek = no_llseek, | |
1489 | }; | |
1490 | ||
1491 | static struct video_device usbvision_vbi_template= | |
1492 | { | |
483dfdb6 | 1493 | .owner = THIS_MODULE, |
483dfdb6 TM |
1494 | .type = VID_TYPE_TUNER, |
1495 | .hardware = VID_HARDWARE_USBVISION, | |
1496 | .fops = &usbvision_vbi_fops, | |
483dfdb6 TM |
1497 | .release = video_device_release, |
1498 | .name = "usbvision-vbi", | |
483dfdb6 TM |
1499 | .minor = -1, |
1500 | }; | |
1501 | ||
1502 | ||
1503 | static struct video_device *usbvision_vdev_init(struct usb_usbvision *usbvision, | |
1504 | struct video_device *vdev_template, | |
1505 | char *name) | |
1506 | { | |
1507 | struct usb_device *usb_dev = usbvision->dev; | |
1508 | struct video_device *vdev; | |
1509 | ||
1510 | if (usb_dev == NULL) { | |
1511 | err("%s: usbvision->dev is not set", __FUNCTION__); | |
1512 | return NULL; | |
1513 | } | |
1514 | ||
1515 | vdev = video_device_alloc(); | |
1516 | if (NULL == vdev) { | |
1517 | return NULL; | |
1518 | } | |
1519 | *vdev = *vdev_template; | |
1520 | // vdev->minor = -1; | |
1521 | vdev->dev = &usb_dev->dev; | |
1522 | snprintf(vdev->name, sizeof(vdev->name), "%s", name); | |
1523 | video_set_drvdata(vdev, usbvision); | |
1524 | return vdev; | |
1525 | } | |
1526 | ||
1527 | // unregister video4linux devices | |
1528 | static void usbvision_unregister_video(struct usb_usbvision *usbvision) | |
1529 | { | |
1530 | // vbi Device: | |
1531 | if (usbvision->vbi) { | |
1532 | PDEBUG(DBG_PROBE, "unregister /dev/vbi%d [v4l2]", usbvision->vbi->minor & 0x1f); | |
1533 | if (usbvision->vbi->minor != -1) { | |
1534 | video_unregister_device(usbvision->vbi); | |
1535 | } | |
1536 | else { | |
1537 | video_device_release(usbvision->vbi); | |
1538 | } | |
1539 | usbvision->vbi = NULL; | |
1540 | } | |
1541 | ||
1542 | // Radio Device: | |
1543 | if (usbvision->rdev) { | |
1544 | PDEBUG(DBG_PROBE, "unregister /dev/radio%d [v4l2]", usbvision->rdev->minor & 0x1f); | |
1545 | if (usbvision->rdev->minor != -1) { | |
1546 | video_unregister_device(usbvision->rdev); | |
1547 | } | |
1548 | else { | |
1549 | video_device_release(usbvision->rdev); | |
1550 | } | |
1551 | usbvision->rdev = NULL; | |
1552 | } | |
1553 | ||
1554 | // Video Device: | |
1555 | if (usbvision->vdev) { | |
1556 | PDEBUG(DBG_PROBE, "unregister /dev/video%d [v4l2]", usbvision->vdev->minor & 0x1f); | |
1557 | if (usbvision->vdev->minor != -1) { | |
1558 | video_unregister_device(usbvision->vdev); | |
1559 | } | |
1560 | else { | |
1561 | video_device_release(usbvision->vdev); | |
1562 | } | |
1563 | usbvision->vdev = NULL; | |
1564 | } | |
1565 | } | |
1566 | ||
1567 | // register video4linux devices | |
1568 | static int __devinit usbvision_register_video(struct usb_usbvision *usbvision) | |
1569 | { | |
1570 | // Video Device: | |
1571 | usbvision->vdev = usbvision_vdev_init(usbvision, &usbvision_video_template, "USBVision Video"); | |
1572 | if (usbvision->vdev == NULL) { | |
1573 | goto err_exit; | |
1574 | } | |
1575 | if (video_register_device(usbvision->vdev, VFL_TYPE_GRABBER, video_nr)<0) { | |
1576 | goto err_exit; | |
1577 | } | |
1578 | info("USBVision[%d]: registered USBVision Video device /dev/video%d [v4l2]", usbvision->nr,usbvision->vdev->minor & 0x1f); | |
1579 | ||
1580 | // Radio Device: | |
1581 | if (usbvision_device_data[usbvision->DevModel].Radio) { | |
1582 | // usbvision has radio | |
1583 | usbvision->rdev = usbvision_vdev_init(usbvision, &usbvision_radio_template, "USBVision Radio"); | |
1584 | if (usbvision->rdev == NULL) { | |
1585 | goto err_exit; | |
1586 | } | |
1587 | if (video_register_device(usbvision->rdev, VFL_TYPE_RADIO, radio_nr)<0) { | |
1588 | goto err_exit; | |
1589 | } | |
1590 | info("USBVision[%d]: registered USBVision Radio device /dev/radio%d [v4l2]", usbvision->nr, usbvision->rdev->minor & 0x1f); | |
1591 | } | |
1592 | // vbi Device: | |
1593 | if (usbvision_device_data[usbvision->DevModel].vbi) { | |
1594 | usbvision->vbi = usbvision_vdev_init(usbvision, &usbvision_vbi_template, "USBVision VBI"); | |
1595 | if (usbvision->vdev == NULL) { | |
1596 | goto err_exit; | |
1597 | } | |
1598 | if (video_register_device(usbvision->vbi, VFL_TYPE_VBI, vbi_nr)<0) { | |
1599 | goto err_exit; | |
1600 | } | |
1601 | info("USBVision[%d]: registered USBVision VBI device /dev/vbi%d [v4l2] (Not Working Yet!)", usbvision->nr,usbvision->vbi->minor & 0x1f); | |
1602 | } | |
1603 | // all done | |
1604 | return 0; | |
1605 | ||
1606 | err_exit: | |
1607 | err("USBVision[%d]: video_register_device() failed", usbvision->nr); | |
1608 | usbvision_unregister_video(usbvision); | |
1609 | return -1; | |
1610 | } | |
1611 | ||
1612 | /* | |
1613 | * usbvision_alloc() | |
1614 | * | |
1615 | * This code allocates the struct usb_usbvision. It is filled with default values. | |
1616 | * | |
1617 | * Returns NULL on error, a pointer to usb_usbvision else. | |
1618 | * | |
1619 | */ | |
1620 | static struct usb_usbvision *usbvision_alloc(struct usb_device *dev) | |
1621 | { | |
1622 | struct usb_usbvision *usbvision; | |
1623 | ||
1624 | if ((usbvision = kzalloc(sizeof(struct usb_usbvision), GFP_KERNEL)) == NULL) { | |
1625 | goto err_exit; | |
1626 | } | |
1627 | ||
1628 | usbvision->dev = dev; | |
1629 | ||
1630 | init_MUTEX(&usbvision->lock); /* to 1 == available */ | |
1631 | ||
1632 | // prepare control urb for control messages during interrupts | |
1633 | usbvision->ctrlUrb = usb_alloc_urb(USBVISION_URB_FRAMES, GFP_KERNEL); | |
1634 | if (usbvision->ctrlUrb == NULL) { | |
1635 | goto err_exit; | |
1636 | } | |
1637 | init_waitqueue_head(&usbvision->ctrlUrb_wq); | |
1638 | init_MUTEX(&usbvision->ctrlUrbLock); /* to 1 == available */ | |
1639 | ||
1640 | usbvision_init_powerOffTimer(usbvision); | |
1641 | ||
1642 | return usbvision; | |
1643 | ||
1644 | err_exit: | |
1645 | if (usbvision && usbvision->ctrlUrb) { | |
1646 | usb_free_urb(usbvision->ctrlUrb); | |
1647 | } | |
1648 | if (usbvision) { | |
1649 | kfree(usbvision); | |
1650 | } | |
1651 | return NULL; | |
1652 | } | |
1653 | ||
1654 | /* | |
1655 | * usbvision_release() | |
1656 | * | |
1657 | * This code does final release of struct usb_usbvision. This happens | |
1658 | * after the device is disconnected -and- all clients closed their files. | |
1659 | * | |
1660 | */ | |
1661 | static void usbvision_release(struct usb_usbvision *usbvision) | |
1662 | { | |
1663 | PDEBUG(DBG_PROBE, ""); | |
1664 | ||
1665 | down(&usbvision->lock); | |
1666 | ||
1667 | usbvision_reset_powerOffTimer(usbvision); | |
1668 | ||
1669 | usbvision->initialized = 0; | |
1670 | ||
1671 | up(&usbvision->lock); | |
1672 | ||
1673 | usbvision_remove_sysfs(usbvision->vdev); | |
1674 | usbvision_unregister_video(usbvision); | |
1675 | ||
1676 | if (usbvision->ctrlUrb) { | |
1677 | usb_free_urb(usbvision->ctrlUrb); | |
1678 | } | |
1679 | ||
1680 | kfree(usbvision); | |
1681 | ||
1682 | PDEBUG(DBG_PROBE, "success"); | |
1683 | } | |
1684 | ||
1685 | ||
1686 | /******************************** usb interface *****************************************/ | |
1687 | ||
1688 | static void usbvision_configure_video(struct usb_usbvision *usbvision) | |
1689 | { | |
1690 | int model,i; | |
1691 | ||
1692 | if (usbvision == NULL) | |
1693 | return; | |
1694 | ||
1695 | model = usbvision->DevModel; | |
1696 | usbvision->palette = usbvision_v4l2_format[2]; // V4L2_PIX_FMT_RGB24; | |
1697 | ||
1698 | if (usbvision_device_data[usbvision->DevModel].Vin_Reg2 >= 0) { | |
1699 | usbvision->Vin_Reg2_Preset = usbvision_device_data[usbvision->DevModel].Vin_Reg2 & 0xff; | |
1700 | } else { | |
1701 | usbvision->Vin_Reg2_Preset = 0; | |
1702 | } | |
1703 | ||
1704 | for (i = 0; i < TVNORMS; i++) | |
1705 | if (usbvision_device_data[model].VideoNorm == tvnorms[i].mode) | |
1706 | break; | |
1707 | if (i == TVNORMS) | |
1708 | i = 0; | |
1709 | usbvision->tvnorm = &tvnorms[i]; /* set default norm */ | |
1710 | ||
1711 | usbvision->video_inputs = usbvision_device_data[model].VideoChannels; | |
1712 | usbvision->ctl_input = 0; | |
1713 | ||
1714 | /* This should be here to make i2c clients to be able to register */ | |
1715 | usbvision_audio_off(usbvision); //first switch off audio | |
1716 | if (!PowerOnAtOpen) { | |
1717 | usbvision_power_on(usbvision); //and then power up the noisy tuner | |
1718 | usbvision_init_i2c(usbvision); | |
1719 | } | |
1720 | } | |
1721 | ||
1722 | /* | |
1723 | * usbvision_probe() | |
1724 | * | |
1725 | * This procedure queries device descriptor and accepts the interface | |
1726 | * if it looks like USBVISION video device | |
1727 | * | |
1728 | */ | |
1729 | static int __devinit usbvision_probe(struct usb_interface *intf, const struct usb_device_id *devid) | |
1730 | { | |
1731 | struct usb_device *dev = interface_to_usbdev(intf); | |
1732 | __u8 ifnum = intf->altsetting->desc.bInterfaceNumber; | |
1733 | const struct usb_host_interface *interface; | |
1734 | struct usb_usbvision *usbvision = NULL; | |
1735 | const struct usb_endpoint_descriptor *endpoint; | |
1736 | int model; | |
1737 | ||
1738 | PDEBUG(DBG_PROBE, "VID=%#04x, PID=%#04x, ifnum=%u", | |
1739 | dev->descriptor.idVendor, dev->descriptor.idProduct, ifnum); | |
1740 | /* Is it an USBVISION video dev? */ | |
1741 | model = 0; | |
1742 | for(model = 0; usbvision_device_data[model].idVendor; model++) { | |
1743 | if (le16_to_cpu(dev->descriptor.idVendor) != usbvision_device_data[model].idVendor) { | |
1744 | continue; | |
1745 | } | |
1746 | if (le16_to_cpu(dev->descriptor.idProduct) != usbvision_device_data[model].idProduct) { | |
1747 | continue; | |
1748 | } | |
1749 | ||
1750 | info("%s: %s found", __FUNCTION__, usbvision_device_data[model].ModelString); | |
1751 | break; | |
1752 | } | |
1753 | ||
1754 | if (usbvision_device_data[model].idVendor == 0) { | |
1755 | return -ENODEV; //no matching device | |
1756 | } | |
1757 | if (usbvision_device_data[model].Interface >= 0) { | |
1758 | interface = &dev->actconfig->interface[usbvision_device_data[model].Interface]->altsetting[0]; | |
1759 | } | |
1760 | else { | |
1761 | interface = &dev->actconfig->interface[ifnum]->altsetting[0]; | |
1762 | } | |
1763 | endpoint = &interface->endpoint[1].desc; | |
1764 | if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_ISOC) { | |
1765 | err("%s: interface %d. has non-ISO endpoint!", __FUNCTION__, ifnum); | |
1766 | err("%s: Endpoint attribures %d", __FUNCTION__, endpoint->bmAttributes); | |
1767 | return -ENODEV; | |
1768 | } | |
1769 | if ((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) { | |
1770 | err("%s: interface %d. has ISO OUT endpoint!", __FUNCTION__, ifnum); | |
1771 | return -ENODEV; | |
1772 | } | |
1773 | ||
1774 | usb_get_dev(dev); | |
1775 | ||
1776 | if ((usbvision = usbvision_alloc(dev)) == NULL) { | |
1777 | err("%s: couldn't allocate USBVision struct", __FUNCTION__); | |
1778 | return -ENOMEM; | |
1779 | } | |
1780 | if (dev->descriptor.bNumConfigurations > 1) { | |
1781 | usbvision->bridgeType = BRIDGE_NT1004; | |
1782 | } | |
1783 | else if (usbvision_device_data[model].ModelString == "Dazzle Fusion Model DVC-90 Rev 1 (SECAM)") { | |
1784 | usbvision->bridgeType = BRIDGE_NT1005; | |
1785 | } | |
1786 | else { | |
1787 | usbvision->bridgeType = BRIDGE_NT1003; | |
1788 | } | |
1789 | PDEBUG(DBG_PROBE, "bridgeType %d", usbvision->bridgeType); | |
1790 | ||
1791 | down(&usbvision->lock); | |
1792 | ||
1793 | usbvision->nr = usbvision_nr++; | |
1794 | ||
1795 | usbvision->have_tuner = usbvision_device_data[model].Tuner; | |
1796 | if (usbvision->have_tuner) { | |
1797 | usbvision->tuner_type = usbvision_device_data[model].TunerType; | |
1798 | } | |
1799 | ||
1800 | usbvision->tuner_addr = ADDR_UNSET; | |
1801 | ||
1802 | usbvision->DevModel = model; | |
1803 | usbvision->remove_pending = 0; | |
1804 | usbvision->iface = ifnum; | |
1805 | usbvision->ifaceAltInactive = 0; | |
1806 | usbvision->ifaceAltActive = 1; | |
1807 | usbvision->video_endp = endpoint->bEndpointAddress; | |
1808 | usbvision->isocPacketSize = 0; | |
1809 | usbvision->usb_bandwidth = 0; | |
1810 | usbvision->user = 0; | |
1811 | usbvision->streaming = Stream_Off; | |
1812 | usbvision_register_video(usbvision); | |
1813 | usbvision_configure_video(usbvision); | |
1814 | up(&usbvision->lock); | |
1815 | ||
1816 | ||
1817 | usb_set_intfdata (intf, usbvision); | |
1818 | usbvision_create_sysfs(usbvision->vdev); | |
1819 | ||
1820 | PDEBUG(DBG_PROBE, "success"); | |
1821 | return 0; | |
1822 | } | |
1823 | ||
1824 | ||
1825 | /* | |
1826 | * usbvision_disconnect() | |
1827 | * | |
1828 | * This procedure stops all driver activity, deallocates interface-private | |
1829 | * structure (pointed by 'ptr') and after that driver should be removable | |
1830 | * with no ill consequences. | |
1831 | * | |
1832 | */ | |
1833 | static void __devexit usbvision_disconnect(struct usb_interface *intf) | |
1834 | { | |
1835 | struct usb_usbvision *usbvision = usb_get_intfdata(intf); | |
1836 | ||
1837 | PDEBUG(DBG_PROBE, ""); | |
1838 | ||
1839 | if (usbvision == NULL) { | |
1840 | err("%s: usb_get_intfdata() failed", __FUNCTION__); | |
1841 | return; | |
1842 | } | |
1843 | usb_set_intfdata (intf, NULL); | |
1844 | ||
1845 | down(&usbvision->lock); | |
1846 | ||
1847 | // At this time we ask to cancel outstanding URBs | |
1848 | usbvision_stop_isoc(usbvision); | |
1849 | ||
1850 | if (usbvision->power) { | |
1851 | usbvision_i2c_usb_del_bus(&usbvision->i2c_adap); | |
1852 | usbvision_power_off(usbvision); | |
1853 | } | |
1854 | usbvision->remove_pending = 1; // Now all ISO data will be ignored | |
1855 | ||
1856 | usb_put_dev(usbvision->dev); | |
1857 | usbvision->dev = NULL; // USB device is no more | |
1858 | ||
1859 | up(&usbvision->lock); | |
1860 | ||
1861 | if (usbvision->user) { | |
1862 | info("%s: In use, disconnect pending", __FUNCTION__); | |
1863 | wake_up_interruptible(&usbvision->wait_frame); | |
1864 | wake_up_interruptible(&usbvision->wait_stream); | |
1865 | } | |
1866 | else { | |
1867 | usbvision_release(usbvision); | |
1868 | } | |
1869 | ||
1870 | PDEBUG(DBG_PROBE, "success"); | |
1871 | ||
1872 | } | |
1873 | ||
1874 | static struct usb_driver usbvision_driver = { | |
1875 | .name = "usbvision", | |
1876 | .id_table = usbvision_table, | |
1877 | .probe = usbvision_probe, | |
1878 | .disconnect = usbvision_disconnect | |
1879 | }; | |
1880 | ||
1881 | /* | |
1882 | * customdevice_process() | |
1883 | * | |
1884 | * This procedure preprocesses CustomDevice parameter if any | |
1885 | * | |
1886 | */ | |
0a0ceade | 1887 | static void customdevice_process(void) |
483dfdb6 TM |
1888 | { |
1889 | usbvision_device_data[0]=usbvision_device_data[1]; | |
1890 | usbvision_table[0]=usbvision_table[1]; | |
1891 | ||
1892 | if(CustomDevice) | |
1893 | { | |
1894 | char *parse=CustomDevice; | |
1895 | ||
1896 | PDEBUG(DBG_PROBE, "CustomDevide=%s", CustomDevice); | |
1897 | ||
1898 | /*format is CustomDevice="0x0573 0x4D31 0 7113 3 PAL 1 1 1 5 -1 -1 -1 -1 -1" | |
1899 | usbvision_device_data[0].idVendor; | |
1900 | usbvision_device_data[0].idProduct; | |
1901 | usbvision_device_data[0].Interface; | |
1902 | usbvision_device_data[0].Codec; | |
1903 | usbvision_device_data[0].VideoChannels; | |
1904 | usbvision_device_data[0].VideoNorm; | |
1905 | usbvision_device_data[0].AudioChannels; | |
1906 | usbvision_device_data[0].Radio; | |
1907 | usbvision_device_data[0].Tuner; | |
1908 | usbvision_device_data[0].TunerType; | |
1909 | usbvision_device_data[0].Vin_Reg1; | |
1910 | usbvision_device_data[0].Vin_Reg2; | |
1911 | usbvision_device_data[0].X_Offset; | |
1912 | usbvision_device_data[0].Y_Offset; | |
1913 | usbvision_device_data[0].Dvi_yuv; | |
1914 | usbvision_device_data[0].ModelString; | |
1915 | */ | |
1916 | ||
1917 | rmspace(parse); | |
1918 | usbvision_device_data[0].ModelString="USBVISION Custom Device"; | |
1919 | ||
1920 | parse+=2; | |
1921 | sscanf(parse,"%x",&usbvision_device_data[0].idVendor); | |
1922 | goto2next(parse); | |
1923 | PDEBUG(DBG_PROBE, "idVendor=0x%.4X", usbvision_device_data[0].idVendor); | |
1924 | parse+=2; | |
1925 | sscanf(parse,"%x",&usbvision_device_data[0].idProduct); | |
1926 | goto2next(parse); | |
1927 | PDEBUG(DBG_PROBE, "idProduct=0x%.4X", usbvision_device_data[0].idProduct); | |
1928 | sscanf(parse,"%d",&usbvision_device_data[0].Interface); | |
1929 | goto2next(parse); | |
1930 | PDEBUG(DBG_PROBE, "Interface=%d", usbvision_device_data[0].Interface); | |
1931 | sscanf(parse,"%d",&usbvision_device_data[0].Codec); | |
1932 | goto2next(parse); | |
1933 | PDEBUG(DBG_PROBE, "Codec=%d", usbvision_device_data[0].Codec); | |
1934 | sscanf(parse,"%d",&usbvision_device_data[0].VideoChannels); | |
1935 | goto2next(parse); | |
1936 | PDEBUG(DBG_PROBE, "VideoChannels=%d", usbvision_device_data[0].VideoChannels); | |
1937 | ||
1938 | switch(*parse) | |
1939 | { | |
1940 | case 'P': | |
1941 | PDEBUG(DBG_PROBE, "VideoNorm=PAL"); | |
1942 | usbvision_device_data[0].VideoNorm=VIDEO_MODE_PAL; | |
1943 | break; | |
1944 | ||
1945 | case 'S': | |
1946 | PDEBUG(DBG_PROBE, "VideoNorm=SECAM"); | |
1947 | usbvision_device_data[0].VideoNorm=VIDEO_MODE_SECAM; | |
1948 | break; | |
1949 | ||
1950 | case 'N': | |
1951 | PDEBUG(DBG_PROBE, "VideoNorm=NTSC"); | |
1952 | usbvision_device_data[0].VideoNorm=VIDEO_MODE_NTSC; | |
1953 | break; | |
1954 | ||
1955 | default: | |
1956 | PDEBUG(DBG_PROBE, "VideoNorm=PAL (by default)"); | |
1957 | usbvision_device_data[0].VideoNorm=VIDEO_MODE_PAL; | |
1958 | break; | |
1959 | } | |
1960 | goto2next(parse); | |
1961 | ||
1962 | sscanf(parse,"%d",&usbvision_device_data[0].AudioChannels); | |
1963 | goto2next(parse); | |
1964 | PDEBUG(DBG_PROBE, "AudioChannels=%d", usbvision_device_data[0].AudioChannels); | |
1965 | sscanf(parse,"%d",&usbvision_device_data[0].Radio); | |
1966 | goto2next(parse); | |
1967 | PDEBUG(DBG_PROBE, "Radio=%d", usbvision_device_data[0].Radio); | |
1968 | sscanf(parse,"%d",&usbvision_device_data[0].Tuner); | |
1969 | goto2next(parse); | |
1970 | PDEBUG(DBG_PROBE, "Tuner=%d", usbvision_device_data[0].Tuner); | |
1971 | sscanf(parse,"%d",&usbvision_device_data[0].TunerType); | |
1972 | goto2next(parse); | |
1973 | PDEBUG(DBG_PROBE, "TunerType=%d", usbvision_device_data[0].TunerType); | |
1974 | sscanf(parse,"%d",&usbvision_device_data[0].Vin_Reg1); | |
1975 | goto2next(parse); | |
1976 | PDEBUG(DBG_PROBE, "Vin_Reg1=%d", usbvision_device_data[0].Vin_Reg1); | |
1977 | sscanf(parse,"%d",&usbvision_device_data[0].Vin_Reg2); | |
1978 | goto2next(parse); | |
1979 | PDEBUG(DBG_PROBE, "Vin_Reg2=%d", usbvision_device_data[0].Vin_Reg2); | |
1980 | sscanf(parse,"%d",&usbvision_device_data[0].X_Offset); | |
1981 | goto2next(parse); | |
1982 | PDEBUG(DBG_PROBE, "X_Offset=%d", usbvision_device_data[0].X_Offset); | |
1983 | sscanf(parse,"%d",&usbvision_device_data[0].Y_Offset); | |
1984 | goto2next(parse); | |
1985 | PDEBUG(DBG_PROBE, "Y_Offset=%d", usbvision_device_data[0].Y_Offset); | |
1986 | sscanf(parse,"%d",&usbvision_device_data[0].Dvi_yuv); | |
1987 | PDEBUG(DBG_PROBE, "Dvi_yuv=%d", usbvision_device_data[0].Dvi_yuv); | |
1988 | ||
1989 | //add to usbvision_table also | |
1990 | usbvision_table[0].match_flags=USB_DEVICE_ID_MATCH_DEVICE; | |
1991 | usbvision_table[0].idVendor=usbvision_device_data[0].idVendor; | |
1992 | usbvision_table[0].idProduct=usbvision_device_data[0].idProduct; | |
1993 | ||
1994 | } | |
1995 | } | |
1996 | ||
1997 | ||
1998 | ||
1999 | /* | |
2000 | * usbvision_init() | |
2001 | * | |
2002 | * This code is run to initialize the driver. | |
2003 | * | |
2004 | */ | |
2005 | static int __init usbvision_init(void) | |
2006 | { | |
2007 | int errCode; | |
2008 | ||
2009 | PDEBUG(DBG_PROBE, ""); | |
2010 | ||
2011 | PDEBUG(DBG_IOCTL, "IOCTL debugging is enabled [video]"); | |
2012 | PDEBUG(DBG_IO, "IO debugging is enabled [video]"); | |
2013 | PDEBUG(DBG_PROBE, "PROBE debugging is enabled [video]"); | |
c876a346 | 2014 | PDEBUG(DBG_MMAP, "MMAP debugging is enabled [video]"); |
483dfdb6 TM |
2015 | |
2016 | /* disable planar mode support unless compression enabled */ | |
2017 | if (isocMode != ISOC_MODE_COMPRESS ) { | |
2018 | // FIXME : not the right way to set supported flag | |
2019 | usbvision_v4l2_format[6].supported = 0; // V4L2_PIX_FMT_YVU420 | |
2020 | usbvision_v4l2_format[7].supported = 0; // V4L2_PIX_FMT_YUV422P | |
2021 | } | |
2022 | ||
2023 | customdevice_process(); | |
2024 | ||
2025 | errCode = usb_register(&usbvision_driver); | |
2026 | ||
2027 | if (errCode == 0) { | |
2028 | info(DRIVER_DESC " : " USBVISION_VERSION_STRING); | |
2029 | PDEBUG(DBG_PROBE, "success"); | |
2030 | } | |
2031 | return errCode; | |
2032 | } | |
2033 | ||
2034 | static void __exit usbvision_exit(void) | |
2035 | { | |
2036 | PDEBUG(DBG_PROBE, ""); | |
2037 | ||
2038 | usb_deregister(&usbvision_driver); | |
2039 | PDEBUG(DBG_PROBE, "success"); | |
2040 | } | |
2041 | ||
2042 | module_init(usbvision_init); | |
2043 | module_exit(usbvision_exit); | |
2044 | ||
2045 | /* | |
2046 | * Overrides for Emacs so that we follow Linus's tabbing style. | |
2047 | * --------------------------------------------------------------------------- | |
2048 | * Local variables: | |
2049 | * c-basic-offset: 8 | |
2050 | * End: | |
2051 | */ |