[SCSI] aic7xxx: correct target valid check in aic7xxx_proc.c
[deliverable/linux.git] / drivers / message / fusion / mptspi.c
CommitLineData
243eabcf
MED
1/*
2 * linux/drivers/message/fusion/mptspi.c
3 * For use with LSI Logic PCI chip/adapter(s)
4 * running LSI Logic Fusion MPT (Message Passing Technology) firmware.
5 *
6 * Copyright (c) 1999-2005 LSI Logic Corporation
7 * (mailto:mpt_linux_developer@lsil.com)
8 *
9 */
10/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
11/*
12 This program is free software; you can redistribute it and/or modify
13 it under the terms of the GNU General Public License as published by
14 the Free Software Foundation; version 2 of the License.
15
16 This program is distributed in the hope that it will be useful,
17 but WITHOUT ANY WARRANTY; without even the implied warranty of
18 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 GNU General Public License for more details.
20
21 NO WARRANTY
22 THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
23 CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
24 LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
25 MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
26 solely responsible for determining the appropriateness of using and
27 distributing the Program and assumes all risks associated with its
28 exercise of rights under this Agreement, including but not limited to
29 the risks and costs of program errors, damage to or loss of data,
30 programs or equipment, and unavailability or interruption of operations.
31
32 DISCLAIMER OF LIABILITY
33 NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
34 DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
35 DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
36 ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
37 TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
38 USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
39 HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
40
41 You should have received a copy of the GNU General Public License
42 along with this program; if not, write to the Free Software
43 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
44*/
45/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
46
47#include "linux_compat.h" /* linux-2.6 tweaks */
48#include <linux/module.h>
49#include <linux/kernel.h>
50#include <linux/init.h>
51#include <linux/errno.h>
52#include <linux/kdev_t.h>
53#include <linux/blkdev.h>
54#include <linux/delay.h> /* for mdelay */
55#include <linux/interrupt.h> /* needed for in_interrupt() proto */
56#include <linux/reboot.h> /* notifier code */
57#include <linux/sched.h>
58#include <linux/workqueue.h>
59
60#include <scsi/scsi.h>
61#include <scsi/scsi_cmnd.h>
62#include <scsi/scsi_device.h>
63#include <scsi/scsi_host.h>
64#include <scsi/scsi_tcq.h>
65
66#include "mptbase.h"
67#include "mptscsih.h"
68
69/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
70#define my_NAME "Fusion MPT SPI Host driver"
71#define my_VERSION MPT_LINUX_VERSION_COMMON
72#define MYNAM "mptspi"
73
74MODULE_AUTHOR(MODULEAUTHOR);
75MODULE_DESCRIPTION(my_NAME);
76MODULE_LICENSE("GPL");
77
78/* Command line args */
79#ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION
80static int mpt_dv = MPTSCSIH_DOMAIN_VALIDATION;
81module_param(mpt_dv, int, 0);
82MODULE_PARM_DESC(mpt_dv, " DV Algorithm: enhanced=1, basic=0 (default=MPTSCSIH_DOMAIN_VALIDATION=1)");
83
84static int mpt_width = MPTSCSIH_MAX_WIDTH;
85module_param(mpt_width, int, 0);
86MODULE_PARM_DESC(mpt_width, " Max Bus Width: wide=1, narrow=0 (default=MPTSCSIH_MAX_WIDTH=1)");
87
88static ushort mpt_factor = MPTSCSIH_MIN_SYNC;
89module_param(mpt_factor, ushort, 0);
90MODULE_PARM_DESC(mpt_factor, " Min Sync Factor (default=MPTSCSIH_MIN_SYNC=0x08)");
91#endif
92
93static int mpt_saf_te = MPTSCSIH_SAF_TE;
94module_param(mpt_saf_te, int, 0);
95MODULE_PARM_DESC(mpt_saf_te, " Force enabling SEP Processor: enable=1 (default=MPTSCSIH_SAF_TE=0)");
96
97static int mpt_pq_filter = 0;
98module_param(mpt_pq_filter, int, 0);
99MODULE_PARM_DESC(mpt_pq_filter, " Enable peripheral qualifier filter: enable=1 (default=0)");
100
101static int mptspiDoneCtx = -1;
102static int mptspiTaskCtx = -1;
103static int mptspiInternalCtx = -1; /* Used only for internal commands */
104
105static struct device_attribute mptspi_queue_depth_attr = {
106 .attr = {
107 .name = "queue_depth",
108 .mode = S_IWUSR,
109 },
110 .store = mptscsih_store_queue_depth,
111};
112
113static struct device_attribute *mptspi_dev_attrs[] = {
114 &mptspi_queue_depth_attr,
115 NULL,
116};
117
118static struct scsi_host_template mptspi_driver_template = {
119 .proc_name = "mptspi",
120 .proc_info = mptscsih_proc_info,
121 .name = "MPT SPI Host",
122 .info = mptscsih_info,
123 .queuecommand = mptscsih_qcmd,
124 .slave_alloc = mptscsih_slave_alloc,
125 .slave_configure = mptscsih_slave_configure,
126 .slave_destroy = mptscsih_slave_destroy,
127 .eh_abort_handler = mptscsih_abort,
128 .eh_device_reset_handler = mptscsih_dev_reset,
129 .eh_bus_reset_handler = mptscsih_bus_reset,
130 .eh_host_reset_handler = mptscsih_host_reset,
131 .bios_param = mptscsih_bios_param,
132 .can_queue = MPT_SCSI_CAN_QUEUE,
133 .this_id = -1,
134 .sg_tablesize = MPT_SCSI_SG_DEPTH,
135 .max_sectors = 8192,
136 .cmd_per_lun = 7,
137 .use_clustering = ENABLE_CLUSTERING,
138 .sdev_attrs = mptspi_dev_attrs,
139};
140
141
142/****************************************************************************
143 * Supported hardware
144 */
145
146static struct pci_device_id mptspi_pci_table[] = {
147 { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_53C1030,
148 PCI_ANY_ID, PCI_ANY_ID },
149 { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_1030_53C1035,
150 PCI_ANY_ID, PCI_ANY_ID },
151 {0} /* Terminating entry */
152};
153MODULE_DEVICE_TABLE(pci, mptspi_pci_table);
154
155/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
156/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
157/*
158 * mptspi_probe - Installs scsi devices per bus.
159 * @pdev: Pointer to pci_dev structure
160 *
161 * Returns 0 for success, non-zero for failure.
162 *
163 */
164static int
165mptspi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
166{
167 struct Scsi_Host *sh;
168 MPT_SCSI_HOST *hd;
169 MPT_ADAPTER *ioc;
170 unsigned long flags;
171 int sz, ii;
172 int numSGE = 0;
173 int scale;
174 int ioc_cap;
175 u8 *mem;
176 int error=0;
177 int r;
178
179 if ((r = mpt_attach(pdev,id)) != 0)
180 return r;
181
182 ioc = pci_get_drvdata(pdev);
d335cc38
MED
183 ioc->DoneCtx = mptspiDoneCtx;
184 ioc->TaskCtx = mptspiTaskCtx;
185 ioc->InternalCtx = mptspiInternalCtx;
243eabcf
MED
186
187 /* Added sanity check on readiness of the MPT adapter.
188 */
189 if (ioc->last_state != MPI_IOC_STATE_OPERATIONAL) {
190 printk(MYIOC_s_WARN_FMT
191 "Skipping because it's not operational!\n",
192 ioc->name);
193 return -ENODEV;
194 }
195
196 if (!ioc->active) {
197 printk(MYIOC_s_WARN_FMT "Skipping because it's disabled!\n",
198 ioc->name);
199 return -ENODEV;
200 }
201
202 /* Sanity check - ensure at least 1 port is INITIATOR capable
203 */
204 ioc_cap = 0;
205 for (ii=0; ii < ioc->facts.NumberOfPorts; ii++) {
206 if (ioc->pfacts[ii].ProtocolFlags &
207 MPI_PORTFACTS_PROTOCOL_INITIATOR)
208 ioc_cap ++;
209 }
210
211 if (!ioc_cap) {
212 printk(MYIOC_s_WARN_FMT
213 "Skipping ioc=%p because SCSI Initiator mode is NOT enabled!\n",
214 ioc->name, ioc);
215 return -ENODEV;
216 }
217
218 sh = scsi_host_alloc(&mptspi_driver_template, sizeof(MPT_SCSI_HOST));
219
220 if (!sh) {
221 printk(MYIOC_s_WARN_FMT
222 "Unable to register controller with SCSI subsystem\n",
223 ioc->name);
224 return -1;
225 }
226
227 spin_lock_irqsave(&ioc->FreeQlock, flags);
228
229 /* Attach the SCSI Host to the IOC structure
230 */
231 ioc->sh = sh;
232
233 sh->io_port = 0;
234 sh->n_io_port = 0;
235 sh->irq = 0;
236
237 /* set 16 byte cdb's */
238 sh->max_cmd_len = 16;
239
240 /* Yikes! This is important!
241 * Otherwise, by default, linux
242 * only scans target IDs 0-7!
243 * pfactsN->MaxDevices unreliable
244 * (not supported in early
245 * versions of the FW).
246 * max_id = 1 + actual max id,
247 * max_lun = 1 + actual last lun,
248 * see hosts.h :o(
249 */
250 sh->max_id = MPT_MAX_SCSI_DEVICES;
251
252 sh->max_lun = MPT_LAST_LUN + 1;
253 sh->max_channel = 0;
254 sh->this_id = ioc->pfacts[0].PortSCSIID;
255
256 /* Required entry.
257 */
258 sh->unique_id = ioc->id;
259
260 /* Verify that we won't exceed the maximum
261 * number of chain buffers
262 * We can optimize: ZZ = req_sz/sizeof(SGE)
263 * For 32bit SGE's:
264 * numSGE = 1 + (ZZ-1)*(maxChain -1) + ZZ
265 * + (req_sz - 64)/sizeof(SGE)
266 * A slightly different algorithm is required for
267 * 64bit SGEs.
268 */
269 scale = ioc->req_sz/(sizeof(dma_addr_t) + sizeof(u32));
270 if (sizeof(dma_addr_t) == sizeof(u64)) {
271 numSGE = (scale - 1) *
272 (ioc->facts.MaxChainDepth-1) + scale +
273 (ioc->req_sz - 60) / (sizeof(dma_addr_t) +
274 sizeof(u32));
275 } else {
276 numSGE = 1 + (scale - 1) *
277 (ioc->facts.MaxChainDepth-1) + scale +
278 (ioc->req_sz - 64) / (sizeof(dma_addr_t) +
279 sizeof(u32));
280 }
281
282 if (numSGE < sh->sg_tablesize) {
283 /* Reset this value */
284 dprintk((MYIOC_s_INFO_FMT
285 "Resetting sg_tablesize to %d from %d\n",
286 ioc->name, numSGE, sh->sg_tablesize));
287 sh->sg_tablesize = numSGE;
288 }
289
243eabcf
MED
290 spin_unlock_irqrestore(&ioc->FreeQlock, flags);
291
292 hd = (MPT_SCSI_HOST *) sh->hostdata;
293 hd->ioc = ioc;
294
295 /* SCSI needs scsi_cmnd lookup table!
296 * (with size equal to req_depth*PtrSz!)
297 */
298 sz = ioc->req_depth * sizeof(void *);
299 mem = kmalloc(sz, GFP_ATOMIC);
300 if (mem == NULL) {
301 error = -ENOMEM;
302 goto mptspi_probe_failed;
303 }
304
305 memset(mem, 0, sz);
306 hd->ScsiLookup = (struct scsi_cmnd **) mem;
307
308 dprintk((MYIOC_s_INFO_FMT "ScsiLookup @ %p, sz=%d\n",
309 ioc->name, hd->ScsiLookup, sz));
310
311 /* Allocate memory for the device structures.
312 * A non-Null pointer at an offset
313 * indicates a device exists.
314 * max_id = 1 + maximum id (hosts.h)
315 */
316 sz = sh->max_id * sizeof(void *);
317 mem = kmalloc(sz, GFP_ATOMIC);
318 if (mem == NULL) {
319 error = -ENOMEM;
320 goto mptspi_probe_failed;
321 }
322
323 memset(mem, 0, sz);
324 hd->Targets = (VirtDevice **) mem;
325
326 dprintk((KERN_INFO
327 " Targets @ %p, sz=%d\n", hd->Targets, sz));
328
329 /* Clear the TM flags
330 */
331 hd->tmPending = 0;
332 hd->tmState = TM_STATE_NONE;
333 hd->resetPending = 0;
334 hd->abortSCpnt = NULL;
335
336 /* Clear the pointer used to store
337 * single-threaded commands, i.e., those
338 * issued during a bus scan, dv and
339 * configuration pages.
340 */
341 hd->cmdPtr = NULL;
342
343 /* Initialize this SCSI Hosts' timers
344 * To use, set the timer expires field
345 * and add_timer
346 */
347 init_timer(&hd->timer);
348 hd->timer.data = (unsigned long) hd;
349 hd->timer.function = mptscsih_timer_expired;
350
351 ioc->spi_data.Saf_Te = mpt_saf_te;
352 hd->mpt_pq_filter = mpt_pq_filter;
353
354#ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION
355 if (ioc->spi_data.maxBusWidth > mpt_width)
356 ioc->spi_data.maxBusWidth = mpt_width;
357 if (ioc->spi_data.minSyncFactor < mpt_factor)
358 ioc->spi_data.minSyncFactor = mpt_factor;
359 if (ioc->spi_data.minSyncFactor == MPT_ASYNC) {
360 ioc->spi_data.maxSyncOffset = 0;
361 }
362 ioc->spi_data.mpt_dv = mpt_dv;
363 hd->negoNvram = 0;
364
365 ddvprintk((MYIOC_s_INFO_FMT
366 "dv %x width %x factor %x saf_te %x mpt_pq_filter %x\n",
367 ioc->name,
368 mpt_dv,
369 mpt_width,
370 mpt_factor,
371 mpt_saf_te,
372 mpt_pq_filter));
373#else
374 hd->negoNvram = MPT_SCSICFG_USE_NVRAM;
375 ddvprintk((MYIOC_s_INFO_FMT
376 "saf_te %x mpt_pq_filter %x\n",
377 ioc->name,
378 mpt_saf_te,
379 mpt_pq_filter));
380#endif
381
382 ioc->spi_data.forceDv = 0;
383 ioc->spi_data.noQas = 0;
384
385 for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++)
386 ioc->spi_data.dvStatus[ii] =
387 MPT_SCSICFG_NEGOTIATE;
388
389 for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++)
390 ioc->spi_data.dvStatus[ii] |=
391 MPT_SCSICFG_DV_NOT_DONE;
392
393 init_waitqueue_head(&hd->scandv_waitq);
394 hd->scandv_wait_done = 0;
395 hd->last_queue_full = 0;
396
243eabcf
MED
397 error = scsi_add_host (sh, &ioc->pcidev->dev);
398 if(error) {
399 dprintk((KERN_ERR MYNAM
400 "scsi_add_host failed\n"));
401 goto mptspi_probe_failed;
402 }
403
404 scsi_scan_host(sh);
405 return 0;
406
407mptspi_probe_failed:
408
409 mptscsih_remove(pdev);
410 return error;
411}
412
413static struct pci_driver mptspi_driver = {
414 .name = "mptspi",
415 .id_table = mptspi_pci_table,
416 .probe = mptspi_probe,
417 .remove = __devexit_p(mptscsih_remove),
418 .driver = {
419 .shutdown = mptscsih_shutdown,
420 },
421#ifdef CONFIG_PM
422 .suspend = mptscsih_suspend,
423 .resume = mptscsih_resume,
424#endif
425};
426
427/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
428/**
429 * mptspi_init - Register MPT adapter(s) as SCSI host(s) with
430 * linux scsi mid-layer.
431 *
432 * Returns 0 for success, non-zero for failure.
433 */
434static int __init
435mptspi_init(void)
436{
437
438 show_mptmod_ver(my_NAME, my_VERSION);
439
440 mptspiDoneCtx = mpt_register(mptscsih_io_done, MPTSPI_DRIVER);
441 mptspiTaskCtx = mpt_register(mptscsih_taskmgmt_complete, MPTSPI_DRIVER);
442 mptspiInternalCtx = mpt_register(mptscsih_scandv_complete, MPTSPI_DRIVER);
443
444 if (mpt_event_register(mptspiDoneCtx, mptscsih_event_process) == 0) {
445 devtprintk((KERN_INFO MYNAM
446 ": Registered for IOC event notifications\n"));
447 }
448
449 if (mpt_reset_register(mptspiDoneCtx, mptscsih_ioc_reset) == 0) {
450 dprintk((KERN_INFO MYNAM
451 ": Registered for IOC reset notifications\n"));
452 }
453
454 return pci_register_driver(&mptspi_driver);
455}
456
457/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
458/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
459/**
460 * mptspi_exit - Unregisters MPT adapter(s)
461 *
462 */
463static void __exit
464mptspi_exit(void)
465{
466 pci_unregister_driver(&mptspi_driver);
467
468 mpt_reset_deregister(mptspiDoneCtx);
469 dprintk((KERN_INFO MYNAM
470 ": Deregistered for IOC reset notifications\n"));
471
472 mpt_event_deregister(mptspiDoneCtx);
473 dprintk((KERN_INFO MYNAM
474 ": Deregistered for IOC event notifications\n"));
475
476 mpt_deregister(mptspiInternalCtx);
477 mpt_deregister(mptspiTaskCtx);
478 mpt_deregister(mptspiDoneCtx);
479}
480
481module_init(mptspi_init);
482module_exit(mptspi_exit);
This page took 0.14447 seconds and 5 git commands to generate.