[deliverable/linux.git] / drivers / mfd / Kconfig

#
# Multifunction miscellaneous devices
#

menu "Multifunction device drivers"
	depends on HAS_IOMEM

config MFD_CORE
	tristate
	default n

config MFD_88PM860X
	bool "Support Marvell 88PM8606/88PM8607"
	depends on I2C=y
	select MFD_CORE
	help
	  This supports for Marvell 88PM8606/88PM8607 Power Management IC.
	  This includes the I2C driver and the core APIs _only_, you have to
	  select individual components like voltage regulators, RTC and
	  battery-charger under the corresponding menus.

config MFD_SM501
	tristate "Support for Silicon Motion SM501"
	 ---help---
	  This is the core driver for the Silicon Motion SM501 multimedia
	  companion chip. This device is a multifunction device which may
	  provide numerous interfaces including USB host controller, USB gadget,
	  asynchronous serial ports, audio functions, and a dual display video
	  interface. The device may be connected by PCI or local bus with
	  varying functions enabled.

config MFD_SM501_GPIO
	bool "Export GPIO via GPIO layer"
	depends on MFD_SM501 && GPIOLIB
	 ---help---
	 This option uses the gpio library layer to export the 64 GPIO
	 lines on the SM501. The platform data is used to supply the
	 base number for the first GPIO line to register.

config MFD_ASIC3
	bool "Support for Compaq ASIC3"
	depends on GENERIC_HARDIRQS && GPIOLIB && ARM
	select MFD_CORE
	 ---help---
	  This driver supports the ASIC3 multifunction chip found on many
	  PDAs (mainly iPAQ and HTC based ones)

config MFD_SH_MOBILE_SDHI
	bool "Support for SuperH Mobile SDHI"
	depends on SUPERH
	select MFD_CORE
	 ---help---
	  This driver supports the SDHI hardware block found in many
	  SuperH Mobile SoCs.

config MFD_DM355EVM_MSP
	bool "DaVinci DM355 EVM microcontroller"
	depends on I2C && MACH_DAVINCI_DM355_EVM
	help
	  This driver supports the MSP430 microcontroller used on these
	  boards.  MSP430 firmware manages resets and power sequencing,
	  inputs from buttons and the IR remote, LEDs, an RTC, and more.

config HTC_EGPIO
	bool "HTC EGPIO support"
	depends on GENERIC_HARDIRQS && GPIOLIB && ARM
	help
	    This driver supports the CPLD egpio chip present on
	    several HTC phones.  It provides basic support for input
	    pins, output pins, and irqs.

config HTC_PASIC3
	tristate "HTC PASIC3 LED/DS1WM chip support"
	select MFD_CORE
	help
	  This core driver provides register access for the LED/DS1WM
	  chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
	  HTC Magician devices, respectively. Actual functionality is
	  handled by the leds-pasic3 and ds1wm drivers.

config UCB1400_CORE
	tristate "Philips UCB1400 Core driver"
	depends on AC97_BUS
	depends on GPIOLIB
	help
	  This enables support for the Philips UCB1400 core functions.
	  The UCB1400 is an AC97 audio codec.

	  To compile this driver as a module, choose M here: the
	  module will be called ucb1400_core.

config TPS65010
	tristate "TPS6501x Power Management chips"
	depends on I2C && GPIOLIB
	default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
	help
	  If you say yes here you get support for the TPS6501x series of
	  Power Management chips.  These include voltage regulators,
	  lithium ion/polymer battery charging, and other features that
	  are often used in portable devices like cell phones and cameras.

	  This driver can also be built as a module.  If so, the module
	  will be called tps65010.

config MENELAUS
	bool "Texas Instruments TWL92330/Menelaus PM chip"
	depends on I2C=y && ARCH_OMAP2
	help
	  If you say yes here you get support for the Texas Instruments
	  TWL92330/Menelaus Power Management chip. This include voltage
	  regulators, Dual slot memory card transceivers, real-time clock
	  and other features that are often used in portable devices like
	  cell phones and PDAs.

config TWL4030_CORE
	bool "Texas Instruments TWL4030/TWL5030/TWL6030/TPS659x0 Support"
	depends on I2C=y && GENERIC_HARDIRQS
	help
	  Say yes here if you have TWL4030 / TWL6030 family chip on your board.
	  This core driver provides register access and IRQ handling
	  facilities, and registers devices for the various functions
	  so that function-specific drivers can bind to them.

	  These multi-function chips are found on many OMAP2 and OMAP3
	  boards, providing power management, RTC, GPIO, keypad, a
	  high speed USB OTG transceiver, an audio codec (on most
	  versions) and many other features.

config TWL4030_POWER
	bool "Support power resources on TWL4030 family chips"
	depends on TWL4030_CORE && ARM
	help
	  Say yes here if you want to use the power resources on the
	  TWL4030 family chips.  Most of these resources are regulators,
	  which have a separate driver; some are control signals, such
	  as clock request handshaking.

	  This driver uses board-specific data to initialize the resources
	  and load scripts controling which resources are switched off/on
	  or reset when a sleep, wakeup or warm reset event occurs.

config TWL4030_CODEC
	bool
	depends on TWL4030_CORE
	select MFD_CORE
	default n

config MFD_TMIO
	bool
	default n

config MFD_T7L66XB
	bool "Support Toshiba T7L66XB"
	depends on ARM && HAVE_CLK
	select MFD_CORE
	select MFD_TMIO
	help
	  Support for Toshiba Mobile IO Controller T7L66XB

config MFD_TC6387XB
	bool "Support Toshiba TC6387XB"
	depends on ARM && HAVE_CLK
	select MFD_CORE
	select MFD_TMIO
	help
	  Support for Toshiba Mobile IO Controller TC6387XB

config MFD_TC6393XB
	bool "Support Toshiba TC6393XB"
	depends on GPIOLIB && ARM
	select MFD_CORE
	select MFD_TMIO
	help
	  Support for Toshiba Mobile IO Controller TC6393XB

config PMIC_DA903X
	bool "Dialog Semiconductor DA9030/DA9034 PMIC Support"
	depends on I2C=y
	help
	  Say yes here to support for Dialog Semiconductor DA9030 (a.k.a
	  ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC
	  usually found on PXA processors-based platforms. This includes
	  the I2C driver and the core APIs _only_, you have to select
	  individual components like LCD backlight, voltage regulators,
	  LEDs and battery-charger under the corresponding menus.

config PMIC_ADP5520
	bool "Analog Devices ADP5520/01 MFD PMIC Core Support"
	depends on I2C=y
	help
	  Say yes here to add support for Analog Devices AD5520 and ADP5501,
	  Multifunction Power Management IC. This includes
	  the I2C driver and the core APIs _only_, you have to select
	  individual components like LCD backlight, LEDs, GPIOs and Kepad
	  under the corresponding menus.

config MFD_WM8400
	tristate "Support Wolfson Microelectronics WM8400"
	select MFD_CORE
	depends on I2C
	help
	  Support for the Wolfson Microelecronics WM8400 PMIC and audio
	  CODEC.  This driver provides common support for accessing
	  the device, additional drivers must be enabled in order to use
	  the functionality of the device.

config MFD_WM831X
	bool "Support Wolfson Microelectronics WM831x/2x PMICs"
	select MFD_CORE
	depends on I2C=y
	help
	  Support for the Wolfson Microelecronics WM831x and WM832x PMICs.
	  This driver provides common support for accessing the device,
	  additional drivers must be enabled in order to use the
	  functionality of the device.

config MFD_WM8350
	bool

config MFD_WM8350_CONFIG_MODE_0
	bool
	depends on MFD_WM8350

config MFD_WM8350_CONFIG_MODE_1
	bool
	depends on MFD_WM8350

config MFD_WM8350_CONFIG_MODE_2
	bool
	depends on MFD_WM8350

config MFD_WM8350_CONFIG_MODE_3
	bool
	depends on MFD_WM8350

config MFD_WM8351_CONFIG_MODE_0
	bool
	depends on MFD_WM8350

config MFD_WM8351_CONFIG_MODE_1
	bool
	depends on MFD_WM8350

config MFD_WM8351_CONFIG_MODE_2
	bool
	depends on MFD_WM8350

config MFD_WM8351_CONFIG_MODE_3
	bool
	depends on MFD_WM8350

config MFD_WM8352_CONFIG_MODE_0
	bool
	depends on MFD_WM8350

config MFD_WM8352_CONFIG_MODE_1
	bool
	depends on MFD_WM8350

config MFD_WM8352_CONFIG_MODE_2
	bool
	depends on MFD_WM8350

config MFD_WM8352_CONFIG_MODE_3
	bool
	depends on MFD_WM8350

config MFD_WM8350_I2C
	bool "Support Wolfson Microelectronics WM8350 with I2C"
	select MFD_WM8350
	depends on I2C=y
	help
	  The WM8350 is an integrated audio and power management
	  subsystem with watchdog and RTC functionality for embedded
	  systems.  This option enables core support for the WM8350 with
	  I2C as the control interface.  Additional options must be
	  selected to enable support for the functionality of the chip.

config MFD_PCF50633
	tristate "Support for NXP PCF50633"
	depends on I2C
	help
	  Say yes here if you have NXP PCF50633 chip on your board.
	  This core driver provides register access and IRQ handling
	  facilities, and registers devices for the various functions
	  so that function-specific drivers can bind to them.

config MFD_MC13783
	tristate "Support Freescale MC13783"
	depends on SPI_MASTER
	select MFD_CORE
	help
	  Support for the Freescale (Atlas) MC13783 PMIC and audio CODEC.
	  This driver provides common support for accessing  the device,
	  additional drivers must be enabled in order to use the
	  functionality of the device.

config PCF50633_ADC
	tristate "Support for NXP PCF50633 ADC"
	depends on MFD_PCF50633
	help
	 Say yes here if you want to include support for ADC in the
	 NXP PCF50633 chip.

config PCF50633_GPIO
	tristate "Support for NXP PCF50633 GPIO"
	depends on MFD_PCF50633
	help
	 Say yes here if you want to include support GPIO for pins on
	 the PCF50633 chip.

config AB3100_CORE
	tristate "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
	depends on I2C
	default y if ARCH_U300
	help
	  Select this to enable the AB3100 Mixed Signal IC core
	  functionality. This connects to a AB3100 on the I2C bus
	  and expose a number of symbols needed for dependent devices
	  to read and write registers and subscribe to events from
	  this multi-functional IC. This is needed to use other features
	  of the AB3100 such as battery-backed RTC, charging control,
	  LEDs, vibrator, system power and temperature, power management
	  and ALSA sound.

config AB3100_OTP
	tristate "ST-Ericsson AB3100 OTP functions"
	depends on AB3100_CORE
	default y if AB3100_CORE
	help
	  Select this to enable the AB3100 Mixed Signal IC OTP (one-time
	  programmable memory) support. This exposes a sysfs file to read
	  out OTP values.

config EZX_PCAP
	bool "PCAP Support"
	depends on GENERIC_HARDIRQS && SPI_MASTER
	help
	  This enables the PCAP ASIC present on EZX Phones. This is
	  needed for MMC, TouchScreen, Sound, USB, etc..

config AB4500_CORE
	tristate "ST-Ericsson's AB4500 Mixed Signal Power management chip"
	depends on SPI
	help
	  Select this option to enable access to AB4500 power management
	  chip. This connects to U8500 on the SSP/SPI bus and exports
	  read/write functions for the devices to get access to this chip.
	  This chip embeds various other multimedia funtionalities as well.

config MFD_TIMBERDALE
	tristate "Support for the Timberdale FPGA"
	select MFD_CORE
	depends on PCI && GPIOLIB
	---help---
	This is the core driver for the timberdale FPGA. This device is a
	multifunction device which exposes numerous platform devices.

	The timberdale FPGA can be found on the Intel Atom development board
	for in-vehicle infontainment, called Russellville.
endmenu

menu "Multimedia Capabilities Port drivers"
	depends on ARCH_SA1100

config MCP
	tristate

# Interface drivers
config MCP_SA11X0
	tristate "Support SA11x0 MCP interface"
	depends on ARCH_SA1100
	select MCP

# Chip drivers
config MCP_UCB1200
	tristate "Support for UCB1200 / UCB1300"
	depends on MCP

config MCP_UCB1200_TS
	tristate "Touchscreen interface support"
	depends on MCP_UCB1200 && INPUT

endmenu
Commit	Line	Data
a4e137ab RK	1	#
	2	# Multifunction miscellaneous devices
	3	#
	4
b6d6454f	5	menu "Multifunction device drivers"
e25df120	6	depends on HAS_IOMEM
b6d6454f	7
aa613de6 DB	8	config MFD_CORE
	9	tristate
	10	default n
	11
2cc50bee HZ	12	config MFD_88PM860X
	13	bool "Support Marvell 88PM8606/88PM8607"
	14	depends on I2C=y
	15	select MFD_CORE
	16	help
	17	This supports for Marvell 88PM8606/88PM8607 Power Management IC.
	18	This includes the I2C driver and the core APIs _only_, you have to
	19	select individual components like voltage regulators, RTC and
	20	battery-charger under the corresponding menus.
	21
b6d6454f BD	22	config MFD_SM501
	23	tristate "Support for Silicon Motion SM501"
	24	---help---
	25	This is the core driver for the Silicon Motion SM501 multimedia
	26	companion chip. This device is a multifunction device which may
01dd2fbf ML	27	provide numerous interfaces including USB host controller, USB gadget,
01dd2fbf ML	28	asynchronous serial ports, audio functions, and a dual display video
b6d6454f BD	29	interface. The device may be connected by PCI or local bus with
	30	varying functions enabled.
	31
f61be273 BD	32	config MFD_SM501_GPIO
f61be273 BD	33	bool "Export GPIO via GPIO layer"
2eedd604	34	depends on MFD_SM501 && GPIOLIB
f61be273 BD	35	---help---
	36	This option uses the gpio library layer to export the 64 GPIO
	37	lines on the SM501. The platform data is used to supply the
	38	base number for the first GPIO line to register.
	39
fa9ff4b1 SO	40	config MFD_ASIC3
fa9ff4b1 SO	41	bool "Support for Compaq ASIC3"
2eedd604	42	depends on GENERIC_HARDIRQS && GPIOLIB && ARM
9461f65a	43	select MFD_CORE
fa9ff4b1 SO	44	---help---
	45	This driver supports the ASIC3 multifunction chip found on many
	46	PDAs (mainly iPAQ and HTC based ones)
	47
a87d5638 MD	48	config MFD_SH_MOBILE_SDHI
	49	bool "Support for SuperH Mobile SDHI"
	50	depends on SUPERH
	51	select MFD_CORE
	52	---help---
	53	This driver supports the SDHI hardware block found in many
	54	SuperH Mobile SoCs.
	55
0931a4c6 DB	56	config MFD_DM355EVM_MSP
	57	bool "DaVinci DM355 EVM microcontroller"
	58	depends on I2C && MACH_DAVINCI_DM355_EVM
	59	help
	60	This driver supports the MSP430 microcontroller used on these
	61	boards. MSP430 firmware manages resets and power sequencing,
	62	inputs from buttons and the IR remote, LEDs, an RTC, and more.
	63
a1635b8f PZ	64	config HTC_EGPIO
a1635b8f PZ	65	bool "HTC EGPIO support"
7444a72e	66	depends on GENERIC_HARDIRQS && GPIOLIB && ARM
a1635b8f PZ	67	help
	68	This driver supports the CPLD egpio chip present on
	69	several HTC phones. It provides basic support for input
	70	pins, output pins, and irqs.
	71
5dc3339a PZ	72	config HTC_PASIC3
5dc3339a PZ	73	tristate "HTC PASIC3 LED/DS1WM chip support"
0254a8f4	74	select MFD_CORE
5dc3339a PZ	75	help
	76	This core driver provides register access for the LED/DS1WM
	77	chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
	78	HTC Magician devices, respectively. Actual functionality is
	79	handled by the leds-pasic3 and ds1wm drivers.
	80
d9105c2b MV	81	config UCB1400_CORE
d9105c2b MV	82	tristate "Philips UCB1400 Core driver"
e4831802	83	depends on AC97_BUS
5a49a540	84	depends on GPIOLIB
d9105c2b MV	85	help
	86	This enables support for the Philips UCB1400 core functions.
	87	The UCB1400 is an AC97 audio codec.
	88
	89	To compile this driver as a module, choose M here: the
	90	module will be called ucb1400_core.
	91
87c13493 DB	92	config TPS65010
	93	tristate "TPS6501x Power Management chips"
	94	depends on I2C && GPIOLIB
	95	default y if MACH_OMAP_H2 \|\| MACH_OMAP_H3 \|\| MACH_OMAP_OSK
	96	help
	97	If you say yes here you get support for the TPS6501x series of
	98	Power Management chips. These include voltage regulators,
	99	lithium ion/polymer battery charging, and other features that
	100	are often used in portable devices like cell phones and cameras.
	101
	102	This driver can also be built as a module. If so, the module
	103	will be called tps65010.
	104
88e75cc3 DB	105	config MENELAUS
88e75cc3 DB	106	bool "Texas Instruments TWL92330/Menelaus PM chip"
088ef950	107	depends on I2C=y && ARCH_OMAP2
88e75cc3 DB	108	help
	109	If you say yes here you get support for the Texas Instruments
	110	TWL92330/Menelaus Power Management chip. This include voltage
692105b8	111	regulators, Dual slot memory card transceivers, real-time clock
88e75cc3 DB	112	and other features that are often used in portable devices like
	113	cell phones and PDAs.
	114
a603a7fa	115	config TWL4030_CORE
e8deb28c	116	bool "Texas Instruments TWL4030/TWL5030/TWL6030/TPS659x0 Support"
67460a7c	117	depends on I2C=y && GENERIC_HARDIRQS
a603a7fa	118	help
e8deb28c	119	Say yes here if you have TWL4030 / TWL6030 family chip on your board.
a603a7fa DB	120	This core driver provides register access and IRQ handling
	121	facilities, and registers devices for the various functions
	122	so that function-specific drivers can bind to them.
	123
	124	These multi-function chips are found on many OMAP2 and OMAP3
	125	boards, providing power management, RTC, GPIO, keypad, a
	126	high speed USB OTG transceiver, an audio codec (on most
	127	versions) and many other features.
	128
ebf0bd36 AK	129	config TWL4030_POWER
	130	bool "Support power resources on TWL4030 family chips"
	131	depends on TWL4030_CORE && ARM
	132	help
	133	Say yes here if you want to use the power resources on the
	134	TWL4030 family chips. Most of these resources are regulators,
	135	which have a separate driver; some are control signals, such
	136	as clock request handshaking.
	137
	138	This driver uses board-specific data to initialize the resources
	139	and load scripts controling which resources are switched off/on
	140	or reset when a sleep, wakeup or warm reset event occurs.
	141
0b83ddeb PU	142	config TWL4030_CODEC
	143	bool
	144	depends on TWL4030_CORE
	145	select MFD_CORE
	146	default n
	147
1c2c30ac SO	148	config MFD_TMIO
	149	bool
	150	default n
	151
1f192015 IM	152	config MFD_T7L66XB
1f192015 IM	153	bool "Support Toshiba T7L66XB"
9ca68233	154	depends on ARM && HAVE_CLK
1f192015	155	select MFD_CORE
1c2c30ac	156	select MFD_TMIO
1f192015 IM	157	help
	158	Support for Toshiba Mobile IO Controller T7L66XB
	159
cbdfb426 IM	160	config MFD_TC6387XB
cbdfb426 IM	161	bool "Support Toshiba TC6387XB"
9ca68233	162	depends on ARM && HAVE_CLK
cbdfb426	163	select MFD_CORE
1c2c30ac	164	select MFD_TMIO
cbdfb426 IM	165	help
	166	Support for Toshiba Mobile IO Controller TC6387XB
	167
d6315949 DB	168	config MFD_TC6393XB
d6315949 DB	169	bool "Support Toshiba TC6393XB"
8d25b36b	170	depends on GPIOLIB && ARM
f024ff10	171	select MFD_CORE
1c2c30ac	172	select MFD_TMIO
d6315949 DB	173	help
	174	Support for Toshiba Mobile IO Controller TC6393XB
	175
8e2eaabf SO	176	config PMIC_DA903X
	177	bool "Dialog Semiconductor DA9030/DA9034 PMIC Support"
	178	depends on I2C=y
	179	help
	180	Say yes here to support for Dialog Semiconductor DA9030 (a.k.a
	181	ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC
	182	usually found on PXA processors-based platforms. This includes
	183	the I2C driver and the core APIs _only_, you have to select
	184	individual components like LCD backlight, voltage regulators,
	185	LEDs and battery-charger under the corresponding menus.
a5736e0b MH	186
	187	config PMIC_ADP5520
	188	bool "Analog Devices ADP5520/01 MFD PMIC Core Support"
	189	depends on I2C=y
	190	help
	191	Say yes here to add support for Analog Devices AD5520 and ADP5501,
	192	Multifunction Power Management IC. This includes
	193	the I2C driver and the core APIs _only_, you have to select
	194	individual components like LCD backlight, LEDs, GPIOs and Kepad
	195	under the corresponding menus.
8e2eaabf	196
1d9f9f04 MB	197	config MFD_WM8400
1d9f9f04 MB	198	tristate "Support Wolfson Microelectronics WM8400"
b8380c1a	199	select MFD_CORE
9c366452	200	depends on I2C
1d9f9f04 MB	201	help
1d9f9f04 MB	202	Support for the Wolfson Microelecronics WM8400 PMIC and audio
9e5aca58	203	CODEC. This driver provides common support for accessing
1d9f9f04 MB	204	the device, additional drivers must be enabled in order to use
	205	the functionality of the device.
	206
b11062b9	207	config MFD_WM831X
6e40173d	208	bool "Support Wolfson Microelectronics WM831x/2x PMICs"
b11062b9	209	select MFD_CORE
01253503	210	depends on I2C=y
b11062b9	211	help
d4e0a89e MB	212	Support for the Wolfson Microelecronics WM831x and WM832x PMICs.
d4e0a89e MB	213	This driver provides common support for accessing the device,
b11062b9 MB	214	additional drivers must be enabled in order to use the
	215	functionality of the device.
	216
89b4012b	217	config MFD_WM8350
ecf926bc	218	bool
89b4012b MB	219
	220	config MFD_WM8350_CONFIG_MODE_0
	221	bool
	222	depends on MFD_WM8350
	223
	224	config MFD_WM8350_CONFIG_MODE_1
	225	bool
	226	depends on MFD_WM8350
	227
	228	config MFD_WM8350_CONFIG_MODE_2
	229	bool
	230	depends on MFD_WM8350
	231
	232	config MFD_WM8350_CONFIG_MODE_3
	233	bool
	234	depends on MFD_WM8350
	235
ca23f8c1 MB	236	config MFD_WM8351_CONFIG_MODE_0
	237	bool
	238	depends on MFD_WM8350
	239
	240	config MFD_WM8351_CONFIG_MODE_1
	241	bool
	242	depends on MFD_WM8350
	243
	244	config MFD_WM8351_CONFIG_MODE_2
	245	bool
	246	depends on MFD_WM8350
	247
	248	config MFD_WM8351_CONFIG_MODE_3
	249	bool
	250	depends on MFD_WM8350
	251
96920630 MB	252	config MFD_WM8352_CONFIG_MODE_0
	253	bool
	254	depends on MFD_WM8350
	255
	256	config MFD_WM8352_CONFIG_MODE_1
	257	bool
	258	depends on MFD_WM8350
	259
	260	config MFD_WM8352_CONFIG_MODE_2
	261	bool
	262	depends on MFD_WM8350
	263
	264	config MFD_WM8352_CONFIG_MODE_3
	265	bool
	266	depends on MFD_WM8350
	267
c661a0b9	268	config MFD_WM8350_I2C
ecf926bc	269	bool "Support Wolfson Microelectronics WM8350 with I2C"
c661a0b9	270	select MFD_WM8350
ecf926bc	271	depends on I2C=y
c661a0b9 MB	272	help
	273	The WM8350 is an integrated audio and power management
	274	subsystem with watchdog and RTC functionality for embedded
	275	systems. This option enables core support for the WM8350 with
	276	I2C as the control interface. Additional options must be
	277	selected to enable support for the functionality of the chip.
	278
f52046b1 BR	279	config MFD_PCF50633
	280	tristate "Support for NXP PCF50633"
	281	depends on I2C
	282	help
	283	Say yes here if you have NXP PCF50633 chip on your board.
	284	This core driver provides register access and IRQ handling
	285	facilities, and registers devices for the various functions
	286	so that function-specific drivers can bind to them.
	287
8238addc SH	288	config MFD_MC13783
	289	tristate "Support Freescale MC13783"
	290	depends on SPI_MASTER
	291	select MFD_CORE
	292	help
	293	Support for the Freescale (Atlas) MC13783 PMIC and audio CODEC.
	294	This driver provides common support for accessing the device,
	295	additional drivers must be enabled in order to use the
	296	functionality of the device.
	297
08c3e06a BR	298	config PCF50633_ADC
	299	tristate "Support for NXP PCF50633 ADC"
	300	depends on MFD_PCF50633
	301	help
	302	Say yes here if you want to include support for ADC in the
	303	NXP PCF50633 chip.
	304
6a3d119b BR	305	config PCF50633_GPIO
	306	tristate "Support for NXP PCF50633 GPIO"
	307	depends on MFD_PCF50633
	308	help
	309	Say yes here if you want to include support GPIO for pins on
	310	the PCF50633 chip.
	311
14fa5691 LW	312	config AB3100_CORE
	313	tristate "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
	314	depends on I2C
	315	default y if ARCH_U300
	316	help
	317	Select this to enable the AB3100 Mixed Signal IC core
	318	functionality. This connects to a AB3100 on the I2C bus
	319	and expose a number of symbols needed for dependent devices
	320	to read and write registers and subscribe to events from
	321	this multi-functional IC. This is needed to use other features
	322	of the AB3100 such as battery-backed RTC, charging control,
	323	LEDs, vibrator, system power and temperature, power management
	324	and ALSA sound.
	325
12992dd8 LW	326	config AB3100_OTP
	327	tristate "ST-Ericsson AB3100 OTP functions"
	328	depends on AB3100_CORE
	329	default y if AB3100_CORE
	330	help
	331	Select this to enable the AB3100 Mixed Signal IC OTP (one-time
	332	programmable memory) support. This exposes a sysfs file to read
	333	out OTP values.
	334
13a09f93 DR	335	config EZX_PCAP
	336	bool "PCAP Support"
	337	depends on GENERIC_HARDIRQS && SPI_MASTER
	338	help
	339	This enables the PCAP ASIC present on EZX Phones. This is
	340	needed for MMC, TouchScreen, Sound, USB, etc..
	341
0c41839e SK	342	config AB4500_CORE
	343	tristate "ST-Ericsson's AB4500 Mixed Signal Power management chip"
	344	depends on SPI
0c41839e SK	345	help
	346	Select this option to enable access to AB4500 power management
	347	chip. This connects to U8500 on the SSP/SPI bus and exports
	348	read/write functions for the devices to get access to this chip.
	349	This chip embeds various other multimedia funtionalities as well.
	350
8edbede9 RR	351	config MFD_TIMBERDALE
	352	tristate "Support for the Timberdale FPGA"
	353	select MFD_CORE
546e29b6	354	depends on PCI && GPIOLIB
8edbede9 RR	355	---help---
	356	This is the core driver for the timberdale FPGA. This device is a
	357	multifunction device which exposes numerous platform devices.
	358
	359	The timberdale FPGA can be found on the Intel Atom development board
	360	for in-vehicle infontainment, called Russellville.
b6d6454f BD	361	endmenu
b6d6454f BD	362
a4e137ab	363	menu "Multimedia Capabilities Port drivers"
f751d50f	364	depends on ARCH_SA1100
a4e137ab RK	365
	366	config MCP
	367	tristate
	368
5e742ad6 RK	369	# Interface drivers
	370	config MCP_SA11X0
	371	tristate "Support SA11x0 MCP interface"
	372	depends on ARCH_SA1100
	373	select MCP
	374
05c45ca9 RK	375	# Chip drivers
	376	config MCP_UCB1200
	377	tristate "Support for UCB1200 / UCB1300"
	378	depends on MCP
	379
acb45439 RK	380	config MCP_UCB1200_TS
	381	tristate "Touchscreen interface support"
	382	depends on MCP_UCB1200 && INPUT
	383
a4e137ab	384	endmenu