Commit | Line | Data |
---|---|---|
a4e137ab RK |
1 | # |
2 | # Multifunction miscellaneous devices | |
3 | # | |
4 | ||
b6d6454f | 5 | menu "Multifunction device drivers" |
e25df120 | 6 | depends on HAS_IOMEM |
b6d6454f | 7 | |
aa613de6 DB |
8 | config MFD_CORE |
9 | tristate | |
10 | default n | |
11 | ||
2cc50bee HZ |
12 | config MFD_88PM860X |
13 | bool "Support Marvell 88PM8606/88PM8607" | |
8d002bdc | 14 | depends on I2C=y && GENERIC_HARDIRQS |
2cc50bee HZ |
15 | select MFD_CORE |
16 | help | |
17 | This supports for Marvell 88PM8606/88PM8607 Power Management IC. | |
18 | This includes the I2C driver and the core APIs _only_, you have to | |
19 | select individual components like voltage regulators, RTC and | |
20 | battery-charger under the corresponding menus. | |
21 | ||
b6d6454f BD |
22 | config MFD_SM501 |
23 | tristate "Support for Silicon Motion SM501" | |
24 | ---help--- | |
25 | This is the core driver for the Silicon Motion SM501 multimedia | |
26 | companion chip. This device is a multifunction device which may | |
01dd2fbf ML |
27 | provide numerous interfaces including USB host controller, USB gadget, |
28 | asynchronous serial ports, audio functions, and a dual display video | |
b6d6454f BD |
29 | interface. The device may be connected by PCI or local bus with |
30 | varying functions enabled. | |
31 | ||
f61be273 BD |
32 | config MFD_SM501_GPIO |
33 | bool "Export GPIO via GPIO layer" | |
2eedd604 | 34 | depends on MFD_SM501 && GPIOLIB |
f61be273 BD |
35 | ---help--- |
36 | This option uses the gpio library layer to export the 64 GPIO | |
37 | lines on the SM501. The platform data is used to supply the | |
38 | base number for the first GPIO line to register. | |
39 | ||
fa9ff4b1 SO |
40 | config MFD_ASIC3 |
41 | bool "Support for Compaq ASIC3" | |
2eedd604 | 42 | depends on GENERIC_HARDIRQS && GPIOLIB && ARM |
9461f65a | 43 | select MFD_CORE |
fa9ff4b1 SO |
44 | ---help--- |
45 | This driver supports the ASIC3 multifunction chip found on many | |
46 | PDAs (mainly iPAQ and HTC based ones) | |
47 | ||
a87d5638 MD |
48 | config MFD_SH_MOBILE_SDHI |
49 | bool "Support for SuperH Mobile SDHI" | |
3d8ca8c0 | 50 | depends on SUPERH || ARCH_SHMOBILE |
a87d5638 | 51 | select MFD_CORE |
311f3ac7 | 52 | select TMIO_MMC_DMA |
a87d5638 MD |
53 | ---help--- |
54 | This driver supports the SDHI hardware block found in many | |
55 | SuperH Mobile SoCs. | |
56 | ||
ca26308c MA |
57 | config MFD_DAVINCI_VOICECODEC |
58 | tristate | |
59 | select MFD_CORE | |
60 | ||
0931a4c6 DB |
61 | config MFD_DM355EVM_MSP |
62 | bool "DaVinci DM355 EVM microcontroller" | |
63 | depends on I2C && MACH_DAVINCI_DM355_EVM | |
64 | help | |
65 | This driver supports the MSP430 microcontroller used on these | |
66 | boards. MSP430 firmware manages resets and power sequencing, | |
67 | inputs from buttons and the IR remote, LEDs, an RTC, and more. | |
68 | ||
a1635b8f PZ |
69 | config HTC_EGPIO |
70 | bool "HTC EGPIO support" | |
7444a72e | 71 | depends on GENERIC_HARDIRQS && GPIOLIB && ARM |
a1635b8f PZ |
72 | help |
73 | This driver supports the CPLD egpio chip present on | |
74 | several HTC phones. It provides basic support for input | |
75 | pins, output pins, and irqs. | |
76 | ||
5dc3339a PZ |
77 | config HTC_PASIC3 |
78 | tristate "HTC PASIC3 LED/DS1WM chip support" | |
0254a8f4 | 79 | select MFD_CORE |
5dc3339a PZ |
80 | help |
81 | This core driver provides register access for the LED/DS1WM | |
82 | chips labeled "AIC2" and "AIC3", found on HTC Blueangel and | |
83 | HTC Magician devices, respectively. Actual functionality is | |
84 | handled by the leds-pasic3 and ds1wm drivers. | |
85 | ||
6048a3dd CM |
86 | config HTC_I2CPLD |
87 | bool "HTC I2C PLD chip support" | |
bef3e20c | 88 | depends on I2C=y && GPIOLIB |
6048a3dd CM |
89 | help |
90 | If you say yes here you get support for the supposed CPLD | |
91 | found on omap850 HTC devices like the HTC Wizard and HTC Herald. | |
92 | This device provides input and output GPIOs through an I2C | |
93 | interface to one or more sub-chips. | |
94 | ||
d9105c2b MV |
95 | config UCB1400_CORE |
96 | tristate "Philips UCB1400 Core driver" | |
e4831802 | 97 | depends on AC97_BUS |
5a49a540 | 98 | depends on GPIOLIB |
d9105c2b MV |
99 | help |
100 | This enables support for the Philips UCB1400 core functions. | |
101 | The UCB1400 is an AC97 audio codec. | |
102 | ||
103 | To compile this driver as a module, choose M here: the | |
104 | module will be called ucb1400_core. | |
105 | ||
87c13493 DB |
106 | config TPS65010 |
107 | tristate "TPS6501x Power Management chips" | |
108 | depends on I2C && GPIOLIB | |
109 | default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK | |
110 | help | |
111 | If you say yes here you get support for the TPS6501x series of | |
112 | Power Management chips. These include voltage regulators, | |
113 | lithium ion/polymer battery charging, and other features that | |
114 | are often used in portable devices like cell phones and cameras. | |
115 | ||
116 | This driver can also be built as a module. If so, the module | |
117 | will be called tps65010. | |
118 | ||
31dd6a26 TF |
119 | config TPS6507X |
120 | tristate "TPS6507x Power Management / Touch Screen chips" | |
121 | select MFD_CORE | |
122 | depends on I2C | |
123 | help | |
124 | If you say yes here you get support for the TPS6507x series of | |
125 | Power Management / Touch Screen chips. These include voltage | |
126 | regulators, lithium ion/polymer battery charging, touch screen | |
127 | and other features that are often used in portable devices. | |
128 | This driver can also be built as a module. If so, the module | |
129 | will be called tps6507x. | |
130 | ||
88e75cc3 DB |
131 | config MENELAUS |
132 | bool "Texas Instruments TWL92330/Menelaus PM chip" | |
088ef950 | 133 | depends on I2C=y && ARCH_OMAP2 |
88e75cc3 DB |
134 | help |
135 | If you say yes here you get support for the Texas Instruments | |
136 | TWL92330/Menelaus Power Management chip. This include voltage | |
692105b8 | 137 | regulators, Dual slot memory card transceivers, real-time clock |
88e75cc3 DB |
138 | and other features that are often used in portable devices like |
139 | cell phones and PDAs. | |
140 | ||
a603a7fa | 141 | config TWL4030_CORE |
e8deb28c | 142 | bool "Texas Instruments TWL4030/TWL5030/TWL6030/TPS659x0 Support" |
67460a7c | 143 | depends on I2C=y && GENERIC_HARDIRQS |
a603a7fa | 144 | help |
e8deb28c | 145 | Say yes here if you have TWL4030 / TWL6030 family chip on your board. |
a603a7fa DB |
146 | This core driver provides register access and IRQ handling |
147 | facilities, and registers devices for the various functions | |
148 | so that function-specific drivers can bind to them. | |
149 | ||
150 | These multi-function chips are found on many OMAP2 and OMAP3 | |
151 | boards, providing power management, RTC, GPIO, keypad, a | |
152 | high speed USB OTG transceiver, an audio codec (on most | |
153 | versions) and many other features. | |
154 | ||
ebf0bd36 AK |
155 | config TWL4030_POWER |
156 | bool "Support power resources on TWL4030 family chips" | |
157 | depends on TWL4030_CORE && ARM | |
158 | help | |
159 | Say yes here if you want to use the power resources on the | |
160 | TWL4030 family chips. Most of these resources are regulators, | |
161 | which have a separate driver; some are control signals, such | |
162 | as clock request handshaking. | |
163 | ||
164 | This driver uses board-specific data to initialize the resources | |
165 | and load scripts controling which resources are switched off/on | |
166 | or reset when a sleep, wakeup or warm reset event occurs. | |
167 | ||
0b83ddeb PU |
168 | config TWL4030_CODEC |
169 | bool | |
170 | depends on TWL4030_CORE | |
171 | select MFD_CORE | |
172 | default n | |
173 | ||
1c2c30ac SO |
174 | config MFD_TMIO |
175 | bool | |
176 | default n | |
177 | ||
311f3ac7 GL |
178 | config TMIO_MMC_DMA |
179 | bool | |
180 | select DMA_ENGINE | |
181 | select DMADEVICES | |
182 | ||
1f192015 IM |
183 | config MFD_T7L66XB |
184 | bool "Support Toshiba T7L66XB" | |
9ca68233 | 185 | depends on ARM && HAVE_CLK |
1f192015 | 186 | select MFD_CORE |
1c2c30ac | 187 | select MFD_TMIO |
1f192015 IM |
188 | help |
189 | Support for Toshiba Mobile IO Controller T7L66XB | |
190 | ||
cbdfb426 IM |
191 | config MFD_TC6387XB |
192 | bool "Support Toshiba TC6387XB" | |
9ca68233 | 193 | depends on ARM && HAVE_CLK |
cbdfb426 | 194 | select MFD_CORE |
1c2c30ac | 195 | select MFD_TMIO |
cbdfb426 IM |
196 | help |
197 | Support for Toshiba Mobile IO Controller TC6387XB | |
198 | ||
d6315949 DB |
199 | config MFD_TC6393XB |
200 | bool "Support Toshiba TC6393XB" | |
8d25b36b | 201 | depends on GPIOLIB && ARM |
f024ff10 | 202 | select MFD_CORE |
1c2c30ac | 203 | select MFD_TMIO |
d6315949 DB |
204 | help |
205 | Support for Toshiba Mobile IO Controller TC6393XB | |
206 | ||
8e2eaabf SO |
207 | config PMIC_DA903X |
208 | bool "Dialog Semiconductor DA9030/DA9034 PMIC Support" | |
209 | depends on I2C=y | |
210 | help | |
211 | Say yes here to support for Dialog Semiconductor DA9030 (a.k.a | |
212 | ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC | |
213 | usually found on PXA processors-based platforms. This includes | |
214 | the I2C driver and the core APIs _only_, you have to select | |
215 | individual components like LCD backlight, voltage regulators, | |
216 | LEDs and battery-charger under the corresponding menus. | |
a5736e0b MH |
217 | |
218 | config PMIC_ADP5520 | |
219 | bool "Analog Devices ADP5520/01 MFD PMIC Core Support" | |
220 | depends on I2C=y | |
221 | help | |
222 | Say yes here to add support for Analog Devices AD5520 and ADP5501, | |
223 | Multifunction Power Management IC. This includes | |
224 | the I2C driver and the core APIs _only_, you have to select | |
225 | individual components like LCD backlight, LEDs, GPIOs and Kepad | |
226 | under the corresponding menus. | |
8e2eaabf | 227 | |
d50f8f33 | 228 | config MFD_MAX8925 |
1f1cf8f9 | 229 | bool "Maxim Semiconductor MAX8925 PMIC Support" |
8d002bdc | 230 | depends on I2C=y && GENERIC_HARDIRQS |
1ad99893 | 231 | select MFD_CORE |
d50f8f33 HZ |
232 | help |
233 | Say yes here to support for Maxim Semiconductor MAX8925. This is | |
234 | a Power Management IC. This driver provies common support for | |
235 | accessing the device, additional drivers must be enabled in order | |
236 | to use the functionality of the device. | |
237 | ||
1d9f9f04 MB |
238 | config MFD_WM8400 |
239 | tristate "Support Wolfson Microelectronics WM8400" | |
b8380c1a | 240 | select MFD_CORE |
9c366452 | 241 | depends on I2C |
1d9f9f04 MB |
242 | help |
243 | Support for the Wolfson Microelecronics WM8400 PMIC and audio | |
9e5aca58 | 244 | CODEC. This driver provides common support for accessing |
1d9f9f04 MB |
245 | the device, additional drivers must be enabled in order to use |
246 | the functionality of the device. | |
247 | ||
b11062b9 | 248 | config MFD_WM831X |
6e40173d | 249 | bool "Support Wolfson Microelectronics WM831x/2x PMICs" |
b11062b9 | 250 | select MFD_CORE |
8d002bdc | 251 | depends on I2C=y && GENERIC_HARDIRQS |
b11062b9 | 252 | help |
d4e0a89e MB |
253 | Support for the Wolfson Microelecronics WM831x and WM832x PMICs. |
254 | This driver provides common support for accessing the device, | |
b11062b9 MB |
255 | additional drivers must be enabled in order to use the |
256 | functionality of the device. | |
257 | ||
89b4012b | 258 | config MFD_WM8350 |
ecf926bc | 259 | bool |
8d002bdc | 260 | depends on GENERIC_HARDIRQS |
89b4012b MB |
261 | |
262 | config MFD_WM8350_CONFIG_MODE_0 | |
263 | bool | |
264 | depends on MFD_WM8350 | |
265 | ||
266 | config MFD_WM8350_CONFIG_MODE_1 | |
267 | bool | |
268 | depends on MFD_WM8350 | |
269 | ||
270 | config MFD_WM8350_CONFIG_MODE_2 | |
271 | bool | |
272 | depends on MFD_WM8350 | |
273 | ||
274 | config MFD_WM8350_CONFIG_MODE_3 | |
275 | bool | |
276 | depends on MFD_WM8350 | |
277 | ||
ca23f8c1 MB |
278 | config MFD_WM8351_CONFIG_MODE_0 |
279 | bool | |
280 | depends on MFD_WM8350 | |
281 | ||
282 | config MFD_WM8351_CONFIG_MODE_1 | |
283 | bool | |
284 | depends on MFD_WM8350 | |
285 | ||
286 | config MFD_WM8351_CONFIG_MODE_2 | |
287 | bool | |
288 | depends on MFD_WM8350 | |
289 | ||
290 | config MFD_WM8351_CONFIG_MODE_3 | |
291 | bool | |
292 | depends on MFD_WM8350 | |
293 | ||
96920630 MB |
294 | config MFD_WM8352_CONFIG_MODE_0 |
295 | bool | |
296 | depends on MFD_WM8350 | |
297 | ||
298 | config MFD_WM8352_CONFIG_MODE_1 | |
299 | bool | |
300 | depends on MFD_WM8350 | |
301 | ||
302 | config MFD_WM8352_CONFIG_MODE_2 | |
303 | bool | |
304 | depends on MFD_WM8350 | |
305 | ||
306 | config MFD_WM8352_CONFIG_MODE_3 | |
307 | bool | |
308 | depends on MFD_WM8350 | |
309 | ||
c661a0b9 | 310 | config MFD_WM8350_I2C |
ecf926bc | 311 | bool "Support Wolfson Microelectronics WM8350 with I2C" |
c661a0b9 | 312 | select MFD_WM8350 |
8d002bdc | 313 | depends on I2C=y && GENERIC_HARDIRQS |
c661a0b9 MB |
314 | help |
315 | The WM8350 is an integrated audio and power management | |
316 | subsystem with watchdog and RTC functionality for embedded | |
317 | systems. This option enables core support for the WM8350 with | |
318 | I2C as the control interface. Additional options must be | |
319 | selected to enable support for the functionality of the chip. | |
320 | ||
9e501086 | 321 | config MFD_WM8994 |
c9fbf7e0 | 322 | bool "Support Wolfson Microelectronics WM8994" |
9e501086 | 323 | select MFD_CORE |
c9fbf7e0 | 324 | depends on I2C=y && GENERIC_HARDIRQS |
9e501086 MB |
325 | help |
326 | The WM8994 is a highly integrated hi-fi CODEC designed for | |
327 | smartphone applicatiosn. As well as audio functionality it | |
328 | has on board GPIO and regulator functionality which is | |
329 | supported via the relevant subsystems. This driver provides | |
330 | core support for the WM8994, in order to use the actual | |
331 | functionaltiy of the device other drivers must be enabled. | |
332 | ||
f52046b1 BR |
333 | config MFD_PCF50633 |
334 | tristate "Support for NXP PCF50633" | |
335 | depends on I2C | |
336 | help | |
337 | Say yes here if you have NXP PCF50633 chip on your board. | |
338 | This core driver provides register access and IRQ handling | |
339 | facilities, and registers devices for the various functions | |
340 | so that function-specific drivers can bind to them. | |
341 | ||
8238addc SH |
342 | config MFD_MC13783 |
343 | tristate "Support Freescale MC13783" | |
344 | depends on SPI_MASTER | |
345 | select MFD_CORE | |
346 | help | |
347 | Support for the Freescale (Atlas) MC13783 PMIC and audio CODEC. | |
348 | This driver provides common support for accessing the device, | |
349 | additional drivers must be enabled in order to use the | |
350 | functionality of the device. | |
351 | ||
08c3e06a BR |
352 | config PCF50633_ADC |
353 | tristate "Support for NXP PCF50633 ADC" | |
354 | depends on MFD_PCF50633 | |
355 | help | |
356 | Say yes here if you want to include support for ADC in the | |
357 | NXP PCF50633 chip. | |
358 | ||
6a3d119b BR |
359 | config PCF50633_GPIO |
360 | tristate "Support for NXP PCF50633 GPIO" | |
361 | depends on MFD_PCF50633 | |
362 | help | |
363 | Say yes here if you want to include support GPIO for pins on | |
364 | the PCF50633 chip. | |
365 | ||
14fa5691 | 366 | config AB3100_CORE |
2071db48 LW |
367 | bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions" |
368 | depends on I2C=y | |
14fa5691 LW |
369 | default y if ARCH_U300 |
370 | help | |
371 | Select this to enable the AB3100 Mixed Signal IC core | |
372 | functionality. This connects to a AB3100 on the I2C bus | |
373 | and expose a number of symbols needed for dependent devices | |
374 | to read and write registers and subscribe to events from | |
375 | this multi-functional IC. This is needed to use other features | |
376 | of the AB3100 such as battery-backed RTC, charging control, | |
377 | LEDs, vibrator, system power and temperature, power management | |
378 | and ALSA sound. | |
379 | ||
12992dd8 LW |
380 | config AB3100_OTP |
381 | tristate "ST-Ericsson AB3100 OTP functions" | |
382 | depends on AB3100_CORE | |
383 | default y if AB3100_CORE | |
384 | help | |
385 | Select this to enable the AB3100 Mixed Signal IC OTP (one-time | |
386 | programmable memory) support. This exposes a sysfs file to read | |
387 | out OTP values. | |
388 | ||
13a09f93 DR |
389 | config EZX_PCAP |
390 | bool "PCAP Support" | |
391 | depends on GENERIC_HARDIRQS && SPI_MASTER | |
392 | help | |
393 | This enables the PCAP ASIC present on EZX Phones. This is | |
394 | needed for MMC, TouchScreen, Sound, USB, etc.. | |
395 | ||
0c41839e SK |
396 | config AB4500_CORE |
397 | tristate "ST-Ericsson's AB4500 Mixed Signal Power management chip" | |
398 | depends on SPI | |
0c41839e SK |
399 | help |
400 | Select this option to enable access to AB4500 power management | |
401 | chip. This connects to U8500 on the SSP/SPI bus and exports | |
402 | read/write functions for the devices to get access to this chip. | |
403 | This chip embeds various other multimedia funtionalities as well. | |
404 | ||
8edbede9 RR |
405 | config MFD_TIMBERDALE |
406 | tristate "Support for the Timberdale FPGA" | |
407 | select MFD_CORE | |
546e29b6 | 408 | depends on PCI && GPIOLIB |
8edbede9 RR |
409 | ---help--- |
410 | This is the core driver for the timberdale FPGA. This device is a | |
411 | multifunction device which exposes numerous platform devices. | |
412 | ||
413 | The timberdale FPGA can be found on the Intel Atom development board | |
414 | for in-vehicle infontainment, called Russellville. | |
e82c60ae DT |
415 | |
416 | config LPC_SCH | |
417 | tristate "Intel SCH LPC" | |
418 | depends on PCI | |
419 | select MFD_CORE | |
420 | help | |
421 | LPC bridge function of the Intel SCH provides support for | |
422 | System Management Bus and General Purpose I/O. | |
423 | ||
e090d506 FF |
424 | config MFD_RDC321X |
425 | tristate "Support for RDC-R321x southbridge" | |
426 | select MFD_CORE | |
427 | depends on PCI | |
428 | help | |
429 | Say yes here if you want to have support for the RDC R-321x SoC | |
430 | southbridge which provides access to GPIOs and Watchdog using the | |
431 | southbridge PCI device configuration space. | |
432 | ||
bd358132 IS |
433 | config MFD_JANZ_CMODIO |
434 | tristate "Support for Janz CMOD-IO PCI MODULbus Carrier Board" | |
435 | select MFD_CORE | |
436 | depends on PCI | |
437 | help | |
438 | This is the core driver for the Janz CMOD-IO PCI MODULbus | |
439 | carrier board. This device is a PCI to MODULbus bridge which may | |
440 | host many different types of MODULbus daughterboards, including | |
441 | CAN and GPIO controllers. | |
442 | ||
b6d6454f BD |
443 | endmenu |
444 | ||
a4e137ab | 445 | menu "Multimedia Capabilities Port drivers" |
f751d50f | 446 | depends on ARCH_SA1100 |
a4e137ab RK |
447 | |
448 | config MCP | |
449 | tristate | |
450 | ||
5e742ad6 RK |
451 | # Interface drivers |
452 | config MCP_SA11X0 | |
453 | tristate "Support SA11x0 MCP interface" | |
454 | depends on ARCH_SA1100 | |
455 | select MCP | |
456 | ||
05c45ca9 RK |
457 | # Chip drivers |
458 | config MCP_UCB1200 | |
459 | tristate "Support for UCB1200 / UCB1300" | |
460 | depends on MCP | |
461 | ||
acb45439 RK |
462 | config MCP_UCB1200_TS |
463 | tristate "Touchscreen interface support" | |
464 | depends on MCP_UCB1200 && INPUT | |
465 | ||
a4e137ab | 466 | endmenu |