Commit | Line | Data |
---|---|---|
a4e137ab RK |
1 | # |
2 | # Multifunction miscellaneous devices | |
3 | # | |
4 | ||
8a0a8e8e AB |
5 | if HAS_IOMEM |
6 | menu "Multifunction device drivers" | |
b6d6454f | 7 | |
aa613de6 DB |
8 | config MFD_CORE |
9 | tristate | |
c94bb233 | 10 | select IRQ_DOMAIN |
aa613de6 DB |
11 | default n |
12 | ||
2cc50bee HZ |
13 | config MFD_88PM860X |
14 | bool "Support Marvell 88PM8606/88PM8607" | |
8d002bdc | 15 | depends on I2C=y && GENERIC_HARDIRQS |
b46a36c0 | 16 | select REGMAP_I2C |
2cc50bee HZ |
17 | select MFD_CORE |
18 | help | |
19 | This supports for Marvell 88PM8606/88PM8607 Power Management IC. | |
20 | This includes the I2C driver and the core APIs _only_, you have to | |
21 | select individual components like voltage regulators, RTC and | |
22 | battery-charger under the corresponding menus. | |
23 | ||
70c6cce0 QZ |
24 | config MFD_88PM800 |
25 | tristate "Support Marvell 88PM800" | |
26 | depends on I2C=y && GENERIC_HARDIRQS | |
27 | select REGMAP_I2C | |
28 | select REGMAP_IRQ | |
29 | select MFD_CORE | |
30 | help | |
31 | This supports for Marvell 88PM800 Power Management IC. | |
32 | This includes the I2C driver and the core APIs _only_, you have to | |
33 | select individual components like voltage regulators, RTC and | |
34 | battery-charger under the corresponding menus. | |
35 | ||
36 | config MFD_88PM805 | |
37 | tristate "Support Marvell 88PM805" | |
38 | depends on I2C=y && GENERIC_HARDIRQS | |
39 | select REGMAP_I2C | |
40 | select REGMAP_IRQ | |
41 | select MFD_CORE | |
42 | help | |
43 | This supports for Marvell 88PM805 Power Management IC. This includes | |
44 | the I2C driver and the core APIs _only_, you have to select individual | |
45 | components like codec device, headset/Mic device under the | |
46 | corresponding menus. | |
47 | ||
b6d6454f BD |
48 | config MFD_SM501 |
49 | tristate "Support for Silicon Motion SM501" | |
50 | ---help--- | |
51 | This is the core driver for the Silicon Motion SM501 multimedia | |
52 | companion chip. This device is a multifunction device which may | |
01dd2fbf ML |
53 | provide numerous interfaces including USB host controller, USB gadget, |
54 | asynchronous serial ports, audio functions, and a dual display video | |
b6d6454f BD |
55 | interface. The device may be connected by PCI or local bus with |
56 | varying functions enabled. | |
57 | ||
f61be273 BD |
58 | config MFD_SM501_GPIO |
59 | bool "Export GPIO via GPIO layer" | |
2eedd604 | 60 | depends on MFD_SM501 && GPIOLIB |
f61be273 BD |
61 | ---help--- |
62 | This option uses the gpio library layer to export the 64 GPIO | |
63 | lines on the SM501. The platform data is used to supply the | |
64 | base number for the first GPIO line to register. | |
65 | ||
67d16a46 WW |
66 | config MFD_RTSX_PCI |
67 | tristate "Support for Realtek PCI-E card reader" | |
21f792cd | 68 | depends on PCI && GENERIC_HARDIRQS |
04bfd1df | 69 | select MFD_CORE |
67d16a46 WW |
70 | help |
71 | This supports for Realtek PCI-Express card reader including rts5209, | |
72 | rts5229, rtl8411, etc. Realtek card reader supports access to many | |
73 | types of memory cards, such as Memory Stick, Memory Stick Pro, | |
74 | Secure Digital and MultiMediaCard. | |
75 | ||
fa9ff4b1 SO |
76 | config MFD_ASIC3 |
77 | bool "Support for Compaq ASIC3" | |
2eedd604 | 78 | depends on GENERIC_HARDIRQS && GPIOLIB && ARM |
9461f65a | 79 | select MFD_CORE |
fa9ff4b1 SO |
80 | ---help--- |
81 | This driver supports the ASIC3 multifunction chip found on many | |
82 | PDAs (mainly iPAQ and HTC based ones) | |
83 | ||
ca26308c MA |
84 | config MFD_DAVINCI_VOICECODEC |
85 | tristate | |
86 | select MFD_CORE | |
87 | ||
0931a4c6 DB |
88 | config MFD_DM355EVM_MSP |
89 | bool "DaVinci DM355 EVM microcontroller" | |
1819ebcf | 90 | depends on I2C=y && MACH_DAVINCI_DM355_EVM |
0931a4c6 DB |
91 | help |
92 | This driver supports the MSP430 microcontroller used on these | |
93 | boards. MSP430 firmware manages resets and power sequencing, | |
94 | inputs from buttons and the IR remote, LEDs, an RTC, and more. | |
95 | ||
03df0f62 CC |
96 | config MFD_TI_SSP |
97 | tristate "TI Sequencer Serial Port support" | |
21f792cd | 98 | depends on ARCH_DAVINCI_TNETV107X && GENERIC_HARDIRQS |
03df0f62 CC |
99 | select MFD_CORE |
100 | ---help--- | |
101 | Say Y here if you want support for the Sequencer Serial Port | |
102 | in a Texas Instruments TNETV107X SoC. | |
103 | ||
104 | To compile this driver as a module, choose M here: the | |
105 | module will be called ti-ssp. | |
106 | ||
01636eb9 PR |
107 | config MFD_TI_AM335X_TSCADC |
108 | tristate "TI ADC / Touch Screen chip support" | |
109 | select MFD_CORE | |
110 | select REGMAP | |
111 | select REGMAP_MMIO | |
21f792cd | 112 | depends on GENERIC_HARDIRQS |
01636eb9 PR |
113 | help |
114 | If you say yes here you get support for Texas Instruments series | |
115 | of Touch Screen /ADC chips. | |
116 | To compile this driver as a module, choose M here: the | |
117 | module will be called ti_am335x_tscadc. | |
118 | ||
a1635b8f PZ |
119 | config HTC_EGPIO |
120 | bool "HTC EGPIO support" | |
7444a72e | 121 | depends on GENERIC_HARDIRQS && GPIOLIB && ARM |
a1635b8f PZ |
122 | help |
123 | This driver supports the CPLD egpio chip present on | |
124 | several HTC phones. It provides basic support for input | |
125 | pins, output pins, and irqs. | |
126 | ||
5dc3339a PZ |
127 | config HTC_PASIC3 |
128 | tristate "HTC PASIC3 LED/DS1WM chip support" | |
0254a8f4 | 129 | select MFD_CORE |
21f792cd | 130 | depends on GENERIC_HARDIRQS |
5dc3339a PZ |
131 | help |
132 | This core driver provides register access for the LED/DS1WM | |
133 | chips labeled "AIC2" and "AIC3", found on HTC Blueangel and | |
134 | HTC Magician devices, respectively. Actual functionality is | |
135 | handled by the leds-pasic3 and ds1wm drivers. | |
136 | ||
6048a3dd CM |
137 | config HTC_I2CPLD |
138 | bool "HTC I2C PLD chip support" | |
bef3e20c | 139 | depends on I2C=y && GPIOLIB |
6048a3dd CM |
140 | help |
141 | If you say yes here you get support for the supposed CPLD | |
142 | found on omap850 HTC devices like the HTC Wizard and HTC Herald. | |
143 | This device provides input and output GPIOs through an I2C | |
144 | interface to one or more sub-chips. | |
145 | ||
d9105c2b MV |
146 | config UCB1400_CORE |
147 | tristate "Philips UCB1400 Core driver" | |
e4831802 | 148 | depends on AC97_BUS |
5a49a540 | 149 | depends on GPIOLIB |
d9105c2b MV |
150 | help |
151 | This enables support for the Philips UCB1400 core functions. | |
152 | The UCB1400 is an AC97 audio codec. | |
153 | ||
154 | To compile this driver as a module, choose M here: the | |
155 | module will be called ucb1400_core. | |
156 | ||
16c5c023 JH |
157 | config MFD_LM3533 |
158 | tristate "LM3533 Lighting Power chip" | |
159 | depends on I2C | |
160 | select MFD_CORE | |
161 | select REGMAP_I2C | |
21f792cd | 162 | depends on GENERIC_HARDIRQS |
16c5c023 JH |
163 | help |
164 | Say yes here to enable support for National Semiconductor / TI | |
165 | LM3533 Lighting Power chips. | |
166 | ||
167 | This driver provides common support for accessing the device; | |
168 | additional drivers must be enabled in order to use the LED, | |
169 | backlight or ambient-light-sensor functionality of the device. | |
170 | ||
798a8eee LW |
171 | config TPS6105X |
172 | tristate "TPS61050/61052 Boost Converters" | |
173 | depends on I2C | |
2edd3b69 | 174 | select REGULATOR |
fc498fa2 | 175 | select MFD_CORE |
2edd3b69 | 176 | select REGULATOR_FIXED_VOLTAGE |
21f792cd | 177 | depends on GENERIC_HARDIRQS |
798a8eee LW |
178 | help |
179 | This option enables a driver for the TP61050/TPS61052 | |
180 | high-power "white LED driver". This boost converter is | |
181 | sometimes used for other things than white LEDs, and | |
182 | also contains a GPIO pin. | |
183 | ||
87c13493 DB |
184 | config TPS65010 |
185 | tristate "TPS6501x Power Management chips" | |
186 | depends on I2C && GPIOLIB | |
187 | default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK | |
188 | help | |
189 | If you say yes here you get support for the TPS6501x series of | |
190 | Power Management chips. These include voltage regulators, | |
191 | lithium ion/polymer battery charging, and other features that | |
192 | are often used in portable devices like cell phones and cameras. | |
193 | ||
194 | This driver can also be built as a module. If so, the module | |
195 | will be called tps65010. | |
196 | ||
31dd6a26 TF |
197 | config TPS6507X |
198 | tristate "TPS6507x Power Management / Touch Screen chips" | |
199 | select MFD_CORE | |
21f792cd | 200 | depends on I2C && GENERIC_HARDIRQS |
31dd6a26 TF |
201 | help |
202 | If you say yes here you get support for the TPS6507x series of | |
203 | Power Management / Touch Screen chips. These include voltage | |
204 | regulators, lithium ion/polymer battery charging, touch screen | |
205 | and other features that are often used in portable devices. | |
206 | This driver can also be built as a module. If so, the module | |
207 | will be called tps6507x. | |
208 | ||
d48f411c AC |
209 | config MFD_TPS65217 |
210 | tristate "TPS65217 Power Management / White LED chips" | |
21f792cd | 211 | depends on I2C && GENERIC_HARDIRQS |
d48f411c AC |
212 | select MFD_CORE |
213 | select REGMAP_I2C | |
214 | help | |
215 | If you say yes here you get support for the TPS65217 series of | |
216 | Power Management / White LED chips. | |
217 | These include voltage regulators, lithium ion/polymer battery | |
218 | charger, wled and other features that are often used in portable | |
219 | devices. | |
220 | ||
221 | This driver can also be built as a module. If so, the module | |
222 | will be called tps65217. | |
223 | ||
37df003c AL |
224 | config MFD_TPS6586X |
225 | bool "TPS6586x Power Management chips" | |
7a7487cb | 226 | depends on I2C=y && GENERIC_HARDIRQS |
37df003c | 227 | select MFD_CORE |
1176b5be | 228 | select REGMAP_I2C |
37df003c AL |
229 | help |
230 | If you say yes here you get support for the TPS6586X series of | |
231 | Power Management chips. | |
232 | This driver provides common support for accessing the device, | |
233 | additional drivers must be enabled in order to use the | |
234 | functionality of the device. | |
235 | ||
236 | This driver can also be built as a module. If so, the module | |
237 | will be called tps6586x. | |
238 | ||
54f323b1 LW |
239 | config MFD_TPS65910 |
240 | bool "TPS65910 Power Management chip" | |
21f792cd | 241 | depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS |
54f323b1 | 242 | select MFD_CORE |
dc9913a0 | 243 | select REGMAP_I2C |
ee487114 | 244 | select REGMAP_IRQ |
21f7541d | 245 | select IRQ_DOMAIN |
54f323b1 LW |
246 | help |
247 | if you say yes here you get support for the TPS65910 series of | |
248 | Power Management chips. | |
249 | ||
36e52873 | 250 | config MFD_TPS65912 |
5608801b | 251 | bool |
36e52873 MO |
252 | depends on GPIOLIB |
253 | ||
254 | config MFD_TPS65912_I2C | |
231dd9c8 | 255 | bool "TPS65912 Power Management chip with I2C" |
36e52873 MO |
256 | select MFD_CORE |
257 | select MFD_TPS65912 | |
21f792cd | 258 | depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS |
36e52873 MO |
259 | help |
260 | If you say yes here you get support for the TPS65912 series of | |
261 | PM chips with I2C interface. | |
262 | ||
263 | config MFD_TPS65912_SPI | |
264 | bool "TPS65912 Power Management chip with SPI" | |
265 | select MFD_CORE | |
266 | select MFD_TPS65912 | |
21f792cd | 267 | depends on SPI_MASTER && GPIOLIB && GENERIC_HARDIRQS |
36e52873 MO |
268 | help |
269 | If you say yes here you get support for the TPS65912 series of | |
270 | PM chips with SPI interface. | |
271 | ||
edd7eabc LD |
272 | config MFD_TPS80031 |
273 | bool "TI TPS80031/TPS80032 Power Management chips" | |
274 | depends on I2C=y && GENERIC_HARDIRQS | |
275 | select MFD_CORE | |
276 | select REGMAP_I2C | |
c2ace4fd | 277 | select REGMAP_IRQ |
edd7eabc LD |
278 | help |
279 | If you say yes here you get support for the Texas Instruments | |
280 | TPS80031/ TPS80032 Fully Integrated Power Management with Power | |
281 | Path and Battery Charger. The device provides five configurable | |
282 | step-down converters, 11 general purpose LDOs, USB OTG Module, | |
283 | ADC, RTC, 2 PWM, System Voltage Regulator/Battery Charger with | |
284 | Power Path from USB, 32K clock generator. | |
285 | ||
88e75cc3 DB |
286 | config MENELAUS |
287 | bool "Texas Instruments TWL92330/Menelaus PM chip" | |
088ef950 | 288 | depends on I2C=y && ARCH_OMAP2 |
88e75cc3 DB |
289 | help |
290 | If you say yes here you get support for the Texas Instruments | |
291 | TWL92330/Menelaus Power Management chip. This include voltage | |
692105b8 | 292 | regulators, Dual slot memory card transceivers, real-time clock |
88e75cc3 DB |
293 | and other features that are often used in portable devices like |
294 | cell phones and PDAs. | |
295 | ||
a603a7fa | 296 | config TWL4030_CORE |
e8deb28c | 297 | bool "Texas Instruments TWL4030/TWL5030/TWL6030/TPS659x0 Support" |
6252547b | 298 | depends on I2C=y && GENERIC_HARDIRQS |
280ad7fd | 299 | select IRQ_DOMAIN |
fbfc23ef | 300 | select REGMAP_I2C |
a603a7fa | 301 | help |
e8deb28c | 302 | Say yes here if you have TWL4030 / TWL6030 family chip on your board. |
a603a7fa DB |
303 | This core driver provides register access and IRQ handling |
304 | facilities, and registers devices for the various functions | |
305 | so that function-specific drivers can bind to them. | |
306 | ||
307 | These multi-function chips are found on many OMAP2 and OMAP3 | |
308 | boards, providing power management, RTC, GPIO, keypad, a | |
309 | high speed USB OTG transceiver, an audio codec (on most | |
310 | versions) and many other features. | |
311 | ||
f99c1d4f K |
312 | config TWL4030_MADC |
313 | tristate "Texas Instruments TWL4030 MADC" | |
314 | depends on TWL4030_CORE | |
315 | help | |
316 | This driver provides support for triton TWL4030-MADC. The | |
317 | driver supports both RT and SW conversion methods. | |
318 | ||
319 | This driver can be built as a module. If so it will be | |
320 | named twl4030-madc | |
321 | ||
ebf0bd36 AK |
322 | config TWL4030_POWER |
323 | bool "Support power resources on TWL4030 family chips" | |
324 | depends on TWL4030_CORE && ARM | |
325 | help | |
326 | Say yes here if you want to use the power resources on the | |
327 | TWL4030 family chips. Most of these resources are regulators, | |
328 | which have a separate driver; some are control signals, such | |
329 | as clock request handshaking. | |
330 | ||
331 | This driver uses board-specific data to initialize the resources | |
25985edc | 332 | and load scripts controlling which resources are switched off/on |
ebf0bd36 AK |
333 | or reset when a sleep, wakeup or warm reset event occurs. |
334 | ||
57fe7251 | 335 | config MFD_TWL4030_AUDIO |
0b83ddeb | 336 | bool |
21f792cd | 337 | depends on TWL4030_CORE && GENERIC_HARDIRQS |
0b83ddeb PU |
338 | select MFD_CORE |
339 | default n | |
340 | ||
f19b2823 | 341 | config TWL6040_CORE |
8eaeb939 | 342 | bool "Support for TWL6040 audio codec" |
21f792cd | 343 | depends on I2C=y && GENERIC_HARDIRQS |
f19b2823 | 344 | select MFD_CORE |
8eaeb939 | 345 | select REGMAP_I2C |
ab7edb14 | 346 | select REGMAP_IRQ |
f19b2823 | 347 | default n |
8eaeb939 PU |
348 | help |
349 | Say yes here if you want support for Texas Instruments TWL6040 audio | |
350 | codec. | |
351 | This driver provides common support for accessing the device, | |
352 | additional drivers must be enabled in order to use the | |
353 | functionality of the device (audio, vibra). | |
f19b2823 | 354 | |
27e34995 RV |
355 | config MFD_STMPE |
356 | bool "Support STMicroelectronics STMPE" | |
e789995d | 357 | depends on (I2C=y || SPI_MASTER=y) && GENERIC_HARDIRQS |
27e34995 RV |
358 | select MFD_CORE |
359 | help | |
360 | Support for the STMPE family of I/O Expanders from | |
361 | STMicroelectronics. | |
362 | ||
363 | Currently supported devices are: | |
364 | ||
365 | STMPE811: GPIO, Touchscreen | |
366 | STMPE1601: GPIO, Keypad | |
367 | STMPE2401: GPIO, Keypad | |
368 | STMPE2403: GPIO, Keypad | |
369 | ||
370 | This driver provides common support for accessing the device, | |
371 | additional drivers must be enabled in order to use the functionality | |
372 | of the device. Currently available sub drivers are: | |
373 | ||
374 | GPIO: stmpe-gpio | |
375 | Keypad: stmpe-keypad | |
376 | Touchscreen: stmpe-ts | |
377 | ||
1a6e4b74 VK |
378 | menu "STMPE Interface Drivers" |
379 | depends on MFD_STMPE | |
380 | ||
381 | config STMPE_I2C | |
382 | bool "STMPE I2C Inteface" | |
eedea80f | 383 | depends on I2C=y |
1a6e4b74 VK |
384 | default y |
385 | help | |
386 | This is used to enable I2C interface of STMPE | |
e789995d VK |
387 | |
388 | config STMPE_SPI | |
389 | bool "STMPE SPI Inteface" | |
390 | depends on SPI_MASTER | |
391 | help | |
392 | This is used to enable SPI interface of STMPE | |
1a6e4b74 VK |
393 | endmenu |
394 | ||
f4e8afdc SI |
395 | config MFD_TC3589X |
396 | bool "Support Toshiba TC35892 and variants" | |
b4ecd326 RV |
397 | depends on I2C=y && GENERIC_HARDIRQS |
398 | select MFD_CORE | |
399 | help | |
f4e8afdc | 400 | Support for the Toshiba TC35892 and variants I/O Expander. |
b4ecd326 RV |
401 | |
402 | This driver provides common support for accessing the device, | |
403 | additional drivers must be enabled in order to use the | |
404 | functionality of the device. | |
405 | ||
1c2c30ac SO |
406 | config MFD_TMIO |
407 | bool | |
408 | default n | |
409 | ||
1f192015 IM |
410 | config MFD_T7L66XB |
411 | bool "Support Toshiba T7L66XB" | |
21f792cd | 412 | depends on ARM && HAVE_CLK && GENERIC_HARDIRQS |
1f192015 | 413 | select MFD_CORE |
1c2c30ac | 414 | select MFD_TMIO |
1f192015 IM |
415 | help |
416 | Support for Toshiba Mobile IO Controller T7L66XB | |
417 | ||
8284328c SP |
418 | config MFD_SMSC |
419 | bool "Support for the SMSC ECE1099 series chips" | |
21f792cd | 420 | depends on I2C=y && GENERIC_HARDIRQS |
8284328c SP |
421 | select MFD_CORE |
422 | select REGMAP_I2C | |
423 | help | |
424 | If you say yes here you get support for the | |
425 | ece1099 chips from SMSC. | |
426 | ||
427 | To compile this driver as a module, choose M here: the | |
428 | module will be called smsc. | |
429 | ||
cbdfb426 IM |
430 | config MFD_TC6387XB |
431 | bool "Support Toshiba TC6387XB" | |
9ca68233 | 432 | depends on ARM && HAVE_CLK |
cbdfb426 | 433 | select MFD_CORE |
1c2c30ac | 434 | select MFD_TMIO |
cbdfb426 IM |
435 | help |
436 | Support for Toshiba Mobile IO Controller TC6387XB | |
437 | ||
d6315949 DB |
438 | config MFD_TC6393XB |
439 | bool "Support Toshiba TC6393XB" | |
8f057d7b GR |
440 | depends on ARM && HAVE_CLK |
441 | select GPIOLIB | |
f024ff10 | 442 | select MFD_CORE |
1c2c30ac | 443 | select MFD_TMIO |
d6315949 DB |
444 | help |
445 | Support for Toshiba Mobile IO Controller TC6393XB | |
446 | ||
8e2eaabf SO |
447 | config PMIC_DA903X |
448 | bool "Dialog Semiconductor DA9030/DA9034 PMIC Support" | |
449 | depends on I2C=y | |
450 | help | |
451 | Say yes here to support for Dialog Semiconductor DA9030 (a.k.a | |
452 | ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC | |
453 | usually found on PXA processors-based platforms. This includes | |
454 | the I2C driver and the core APIs _only_, you have to select | |
455 | individual components like LCD backlight, voltage regulators, | |
456 | LEDs and battery-charger under the corresponding menus. | |
a5736e0b | 457 | |
84c99db8 AJ |
458 | config PMIC_DA9052 |
459 | bool | |
460 | select MFD_CORE | |
461 | ||
cfe04478 AJ |
462 | config MFD_DA9052_SPI |
463 | bool "Support Dialog Semiconductor DA9052/53 PMIC variants with SPI" | |
464 | select REGMAP_SPI | |
465 | select REGMAP_IRQ | |
466 | select PMIC_DA9052 | |
21f792cd | 467 | depends on SPI_MASTER=y && GENERIC_HARDIRQS |
cfe04478 AJ |
468 | help |
469 | Support for the Dialog Semiconductor DA9052 PMIC | |
470 | when controlled using SPI. This driver provides common support | |
471 | for accessing the device, additional drivers must be enabled in | |
472 | order to use the functionality of the device. | |
473 | ||
84c99db8 AJ |
474 | config MFD_DA9052_I2C |
475 | bool "Support Dialog Semiconductor DA9052/53 PMIC variants with I2C" | |
476 | select REGMAP_I2C | |
477 | select REGMAP_IRQ | |
478 | select PMIC_DA9052 | |
21f792cd | 479 | depends on I2C=y && GENERIC_HARDIRQS |
84c99db8 AJ |
480 | help |
481 | Support for the Dialog Semiconductor DA9052 PMIC | |
482 | when controlled using I2C. This driver provides common support | |
483 | for accessing the device, additional drivers must be enabled in | |
484 | order to use the functionality of the device. | |
485 | ||
2896434c AJ |
486 | config MFD_DA9055 |
487 | bool "Dialog Semiconductor DA9055 PMIC Support" | |
488 | select REGMAP_I2C | |
489 | select REGMAP_IRQ | |
490 | select PMIC_DA9055 | |
491 | select MFD_CORE | |
21f792cd | 492 | depends on I2C=y && GENERIC_HARDIRQS |
2896434c AJ |
493 | help |
494 | Say yes here for support of Dialog Semiconductor DA9055. This is | |
495 | a Power Management IC. This driver provides common support for | |
496 | accessing the device as well as the I2C interface to the chip itself. | |
497 | Additional drivers must be enabled in order to use the functionality | |
498 | of the device. | |
499 | ||
500 | This driver can be built as a module. If built as a module it will be | |
501 | called "da9055" | |
502 | ||
a5736e0b MH |
503 | config PMIC_ADP5520 |
504 | bool "Analog Devices ADP5520/01 MFD PMIC Core Support" | |
505 | depends on I2C=y | |
506 | help | |
507 | Say yes here to add support for Analog Devices AD5520 and ADP5501, | |
508 | Multifunction Power Management IC. This includes | |
509 | the I2C driver and the core APIs _only_, you have to select | |
510 | individual components like LCD backlight, LEDs, GPIOs and Kepad | |
511 | under the corresponding menus. | |
8e2eaabf | 512 | |
eea6b7cc MK |
513 | config MFD_LP8788 |
514 | bool "Texas Instruments LP8788 Power Management Unit Driver" | |
21f792cd | 515 | depends on I2C=y && GENERIC_HARDIRQS |
eea6b7cc MK |
516 | select MFD_CORE |
517 | select REGMAP_I2C | |
518 | select IRQ_DOMAIN | |
519 | help | |
520 | TI LP8788 PMU supports regulators, battery charger, RTC, | |
521 | ADC, backlight driver and current sinks. | |
522 | ||
dae8a969 JL |
523 | config MFD_MAX77686 |
524 | bool "Maxim Semiconductor MAX77686 PMIC Support" | |
525 | depends on I2C=y && GENERIC_HARDIRQS | |
526 | select MFD_CORE | |
527 | select REGMAP_I2C | |
528 | select IRQ_DOMAIN | |
529 | help | |
530 | Say yes here to support for Maxim Semiconductor MAX77686. | |
531 | This is a Power Management IC with RTC on chip. | |
532 | This driver provides common support for accessing the device; | |
533 | additional drivers must be enabled in order to use the functionality | |
534 | of the device. | |
535 | ||
83871c00 CC |
536 | config MFD_MAX77693 |
537 | bool "Maxim Semiconductor MAX77693 PMIC Support" | |
538 | depends on I2C=y && GENERIC_HARDIRQS | |
539 | select MFD_CORE | |
29f772d4 | 540 | select REGMAP_I2C |
83871c00 CC |
541 | help |
542 | Say yes here to support for Maxim Semiconductor MAX77693. | |
543 | This is a companion Power Management IC with Flash, Haptic, Charger, | |
544 | and MUIC(Micro USB Interface Controller) controls on chip. | |
545 | This driver provides common support for accessing the device; | |
546 | additional drivers must be enabled in order to use the functionality | |
547 | of the device. | |
548 | ||
a91d2f8d GY |
549 | config MFD_MAX8907 |
550 | tristate "Maxim Semiconductor MAX8907 PMIC Support" | |
551 | select MFD_CORE | |
552 | depends on I2C=y && GENERIC_HARDIRQS | |
553 | select REGMAP_I2C | |
554 | select REGMAP_IRQ | |
555 | help | |
556 | Say yes here to support for Maxim Semiconductor MAX8907. This is | |
557 | a Power Management IC. This driver provides common support for | |
558 | accessing the device; additional drivers must be enabled in order | |
559 | to use the functionality of the device. | |
560 | ||
d50f8f33 | 561 | config MFD_MAX8925 |
1f1cf8f9 | 562 | bool "Maxim Semiconductor MAX8925 PMIC Support" |
8d002bdc | 563 | depends on I2C=y && GENERIC_HARDIRQS |
1ad99893 | 564 | select MFD_CORE |
d50f8f33 HZ |
565 | help |
566 | Say yes here to support for Maxim Semiconductor MAX8925. This is | |
6b2aac42 | 567 | a Power Management IC. This driver provides common support for |
d50f8f33 HZ |
568 | accessing the device, additional drivers must be enabled in order |
569 | to use the functionality of the device. | |
570 | ||
527e7e9a MH |
571 | config MFD_MAX8997 |
572 | bool "Maxim Semiconductor MAX8997/8966 PMIC Support" | |
573 | depends on I2C=y && GENERIC_HARDIRQS | |
574 | select MFD_CORE | |
b41511f7 | 575 | select IRQ_DOMAIN |
527e7e9a | 576 | help |
5a924d13 | 577 | Say yes here to support for Maxim Semiconductor MAX8997/8966. |
527e7e9a MH |
578 | This is a Power Management IC with RTC, Flash, Fuel Gauge, Haptic, |
579 | MUIC controls on chip. | |
d7e8c01a | 580 | This driver provides common support for accessing the device; |
527e7e9a MH |
581 | additional drivers must be enabled in order to use the functionality |
582 | of the device. | |
583 | ||
156f2528 | 584 | config MFD_MAX8998 |
f8539ddc | 585 | bool "Maxim Semiconductor MAX8998/National LP3974 PMIC Support" |
2c7e6f57 | 586 | depends on I2C=y && GENERIC_HARDIRQS |
156f2528 KP |
587 | select MFD_CORE |
588 | help | |
f8539ddc KP |
589 | Say yes here to support for Maxim Semiconductor MAX8998 and |
590 | National Semiconductor LP3974. This is a Power Management IC. | |
6b2aac42 | 591 | This driver provides common support for accessing the device, |
f8539ddc KP |
592 | additional drivers must be enabled in order to use the functionality |
593 | of the device. | |
156f2528 | 594 | |
66c9fbb9 SK |
595 | config MFD_SEC_CORE |
596 | bool "SAMSUNG Electronics PMIC Series Support" | |
c3d4d697 SK |
597 | depends on I2C=y && GENERIC_HARDIRQS |
598 | select MFD_CORE | |
599 | select REGMAP_I2C | |
6445b84a | 600 | select REGMAP_IRQ |
c3d4d697 | 601 | help |
66c9fbb9 | 602 | Support for the Samsung Electronics MFD series. |
6b2aac42 | 603 | This driver provides common support for accessing the device, |
c3d4d697 SK |
604 | additional drivers must be enabled in order to use the functionality |
605 | of the device | |
606 | ||
3afbac95 | 607 | config MFD_ARIZONA |
14b5bd5c | 608 | select REGMAP |
78948c17 | 609 | select REGMAP_IRQ |
c481c048 | 610 | select MFD_CORE |
49003a68 | 611 | bool |
3afbac95 MB |
612 | |
613 | config MFD_ARIZONA_I2C | |
614 | tristate "Support Wolfson Microelectronics Arizona platform with I2C" | |
615 | select MFD_ARIZONA | |
616 | select MFD_CORE | |
617 | select REGMAP_I2C | |
21f792cd | 618 | depends on I2C && GENERIC_HARDIRQS |
3afbac95 MB |
619 | help |
620 | Support for the Wolfson Microelectronics Arizona platform audio SoC | |
621 | core functionality controlled via I2C. | |
622 | ||
623 | config MFD_ARIZONA_SPI | |
624 | tristate "Support Wolfson Microelectronics Arizona platform with SPI" | |
625 | select MFD_ARIZONA | |
626 | select MFD_CORE | |
627 | select REGMAP_SPI | |
21f792cd | 628 | depends on SPI_MASTER && GENERIC_HARDIRQS |
3afbac95 MB |
629 | help |
630 | Support for the Wolfson Microelectronics Arizona platform audio SoC | |
631 | core functionality controlled via I2C. | |
632 | ||
633 | config MFD_WM5102 | |
634 | bool "Support Wolfson Microelectronics WM5102" | |
635 | depends on MFD_ARIZONA | |
636 | help | |
637 | Support for Wolfson Microelectronics WM5102 low power audio SoC | |
638 | ||
e102befe MB |
639 | config MFD_WM5110 |
640 | bool "Support Wolfson Microelectronics WM5110" | |
641 | depends on MFD_ARIZONA | |
642 | help | |
643 | Support for Wolfson Microelectronics WM5110 low power audio SoC | |
644 | ||
1d9f9f04 | 645 | config MFD_WM8400 |
eee0e4b4 | 646 | bool "Support Wolfson Microelectronics WM8400" |
b8380c1a | 647 | select MFD_CORE |
21f792cd | 648 | depends on I2C=y && GENERIC_HARDIRQS |
2b247d06 | 649 | select REGMAP_I2C |
1d9f9f04 MB |
650 | help |
651 | Support for the Wolfson Microelecronics WM8400 PMIC and audio | |
9e5aca58 | 652 | CODEC. This driver provides common support for accessing |
1d9f9f04 MB |
653 | the device, additional drivers must be enabled in order to use |
654 | the functionality of the device. | |
655 | ||
b11062b9 | 656 | config MFD_WM831X |
e5b48684 MB |
657 | bool |
658 | depends on GENERIC_HARDIRQS | |
659 | ||
660 | config MFD_WM831X_I2C | |
661 | bool "Support Wolfson Microelectronics WM831x/2x PMICs with I2C" | |
b11062b9 | 662 | select MFD_CORE |
e5b48684 | 663 | select MFD_WM831X |
1df5981b | 664 | select REGMAP_I2C |
cd99758b | 665 | select IRQ_DOMAIN |
8d002bdc | 666 | depends on I2C=y && GENERIC_HARDIRQS |
b11062b9 | 667 | help |
e5b48684 MB |
668 | Support for the Wolfson Microelecronics WM831x and WM832x PMICs |
669 | when controlled using I2C. This driver provides common support | |
670 | for accessing the device, additional drivers must be enabled in | |
671 | order to use the functionality of the device. | |
b11062b9 | 672 | |
2aa13b9e MB |
673 | config MFD_WM831X_SPI |
674 | bool "Support Wolfson Microelectronics WM831x/2x PMICs with SPI" | |
675 | select MFD_CORE | |
676 | select MFD_WM831X | |
1df5981b | 677 | select REGMAP_SPI |
cd99758b | 678 | select IRQ_DOMAIN |
2aa13b9e MB |
679 | depends on SPI_MASTER && GENERIC_HARDIRQS |
680 | help | |
681 | Support for the Wolfson Microelecronics WM831x and WM832x PMICs | |
682 | when controlled using SPI. This driver provides common support | |
683 | for accessing the device, additional drivers must be enabled in | |
684 | order to use the functionality of the device. | |
685 | ||
89b4012b | 686 | config MFD_WM8350 |
ecf926bc | 687 | bool |
8d002bdc | 688 | depends on GENERIC_HARDIRQS |
89b4012b MB |
689 | |
690 | config MFD_WM8350_CONFIG_MODE_0 | |
691 | bool | |
692 | depends on MFD_WM8350 | |
693 | ||
694 | config MFD_WM8350_CONFIG_MODE_1 | |
695 | bool | |
696 | depends on MFD_WM8350 | |
697 | ||
698 | config MFD_WM8350_CONFIG_MODE_2 | |
699 | bool | |
700 | depends on MFD_WM8350 | |
701 | ||
702 | config MFD_WM8350_CONFIG_MODE_3 | |
703 | bool | |
704 | depends on MFD_WM8350 | |
705 | ||
ca23f8c1 MB |
706 | config MFD_WM8351_CONFIG_MODE_0 |
707 | bool | |
708 | depends on MFD_WM8350 | |
709 | ||
710 | config MFD_WM8351_CONFIG_MODE_1 | |
711 | bool | |
712 | depends on MFD_WM8350 | |
713 | ||
714 | config MFD_WM8351_CONFIG_MODE_2 | |
715 | bool | |
716 | depends on MFD_WM8350 | |
717 | ||
718 | config MFD_WM8351_CONFIG_MODE_3 | |
719 | bool | |
720 | depends on MFD_WM8350 | |
721 | ||
96920630 MB |
722 | config MFD_WM8352_CONFIG_MODE_0 |
723 | bool | |
724 | depends on MFD_WM8350 | |
725 | ||
726 | config MFD_WM8352_CONFIG_MODE_1 | |
727 | bool | |
728 | depends on MFD_WM8350 | |
729 | ||
730 | config MFD_WM8352_CONFIG_MODE_2 | |
731 | bool | |
732 | depends on MFD_WM8350 | |
733 | ||
734 | config MFD_WM8352_CONFIG_MODE_3 | |
735 | bool | |
736 | depends on MFD_WM8350 | |
737 | ||
c661a0b9 | 738 | config MFD_WM8350_I2C |
ecf926bc | 739 | bool "Support Wolfson Microelectronics WM8350 with I2C" |
c661a0b9 | 740 | select MFD_WM8350 |
8d002bdc | 741 | depends on I2C=y && GENERIC_HARDIRQS |
c661a0b9 MB |
742 | help |
743 | The WM8350 is an integrated audio and power management | |
744 | subsystem with watchdog and RTC functionality for embedded | |
745 | systems. This option enables core support for the WM8350 with | |
746 | I2C as the control interface. Additional options must be | |
747 | selected to enable support for the functionality of the chip. | |
748 | ||
9e501086 | 749 | config MFD_WM8994 |
c9fbf7e0 | 750 | bool "Support Wolfson Microelectronics WM8994" |
9e501086 | 751 | select MFD_CORE |
d6c645fc | 752 | select REGMAP_I2C |
8ab30691 | 753 | select REGMAP_IRQ |
c9fbf7e0 | 754 | depends on I2C=y && GENERIC_HARDIRQS |
9e501086 MB |
755 | help |
756 | The WM8994 is a highly integrated hi-fi CODEC designed for | |
757 | smartphone applicatiosn. As well as audio functionality it | |
758 | has on board GPIO and regulator functionality which is | |
759 | supported via the relevant subsystems. This driver provides | |
760 | core support for the WM8994, in order to use the actual | |
761 | functionaltiy of the device other drivers must be enabled. | |
762 | ||
f52046b1 BR |
763 | config MFD_PCF50633 |
764 | tristate "Support for NXP PCF50633" | |
765 | depends on I2C | |
6e3ad118 | 766 | select REGMAP_I2C |
f52046b1 BR |
767 | help |
768 | Say yes here if you have NXP PCF50633 chip on your board. | |
769 | This core driver provides register access and IRQ handling | |
770 | facilities, and registers devices for the various functions | |
771 | so that function-specific drivers can bind to them. | |
772 | ||
1305134e AL |
773 | config PCF50633_ADC |
774 | tristate "Support for NXP PCF50633 ADC" | |
775 | depends on MFD_PCF50633 | |
776 | help | |
777 | Say yes here if you want to include support for ADC in the | |
778 | NXP PCF50633 chip. | |
779 | ||
780 | config PCF50633_GPIO | |
781 | tristate "Support for NXP PCF50633 GPIO" | |
782 | depends on MFD_PCF50633 | |
783 | help | |
784 | Say yes here if you want to include support GPIO for pins on | |
785 | the PCF50633 chip. | |
786 | ||
8238addc | 787 | config MFD_MC13783 |
8e005935 UKK |
788 | tristate |
789 | ||
790 | config MFD_MC13XXX | |
1cb3642a | 791 | tristate |
21f792cd | 792 | depends on (SPI_MASTER || I2C) && GENERIC_HARDIRQS |
8238addc | 793 | select MFD_CORE |
8e005935 | 794 | select MFD_MC13783 |
8238addc | 795 | help |
a0c7c1d4 MR |
796 | Enable support for the Freescale MC13783 and MC13892 PMICs. |
797 | This driver provides common support for accessing the device, | |
8238addc SH |
798 | additional drivers must be enabled in order to use the |
799 | functionality of the device. | |
800 | ||
a0c7c1d4 | 801 | config MFD_MC13XXX_SPI |
1cb3642a | 802 | tristate "Freescale MC13783 and MC13892 SPI interface" |
21f792cd | 803 | depends on SPI_MASTER && GENERIC_HARDIRQS |
a0c7c1d4 | 804 | select REGMAP_SPI |
1cb3642a | 805 | select MFD_MC13XXX |
a0c7c1d4 MR |
806 | help |
807 | Select this if your MC13xxx is connected via an SPI bus. | |
808 | ||
df3df646 | 809 | config MFD_MC13XXX_I2C |
1cb3642a | 810 | tristate "Freescale MC13892 I2C interface" |
21f792cd | 811 | depends on I2C && GENERIC_HARDIRQS |
df3df646 | 812 | select REGMAP_I2C |
1cb3642a | 813 | select MFD_MC13XXX |
df3df646 MR |
814 | help |
815 | Select this if your MC13xxx is connected via an I2C bus. | |
816 | ||
fa661258 MW |
817 | config ABX500_CORE |
818 | bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions" | |
47c16975 | 819 | default y if ARCH_U300 || ARCH_U8500 |
fa661258 MW |
820 | help |
821 | Say yes here if you have the ABX500 Mixed Signal IC family | |
822 | chips. This core driver expose register access functions. | |
823 | Functionality specific drivers using these functions can | |
824 | remain unchanged when IC changes. Binding of the functions to | |
825 | actual register access is done by the IC core driver. | |
826 | ||
14fa5691 | 827 | config AB3100_CORE |
2071db48 | 828 | bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions" |
21f792cd | 829 | depends on I2C=y && ABX500_CORE && GENERIC_HARDIRQS |
8c96aefb | 830 | select MFD_CORE |
14fa5691 LW |
831 | default y if ARCH_U300 |
832 | help | |
833 | Select this to enable the AB3100 Mixed Signal IC core | |
834 | functionality. This connects to a AB3100 on the I2C bus | |
835 | and expose a number of symbols needed for dependent devices | |
836 | to read and write registers and subscribe to events from | |
837 | this multi-functional IC. This is needed to use other features | |
838 | of the AB3100 such as battery-backed RTC, charging control, | |
839 | LEDs, vibrator, system power and temperature, power management | |
840 | and ALSA sound. | |
841 | ||
12992dd8 LW |
842 | config AB3100_OTP |
843 | tristate "ST-Ericsson AB3100 OTP functions" | |
844 | depends on AB3100_CORE | |
845 | default y if AB3100_CORE | |
846 | help | |
847 | Select this to enable the AB3100 Mixed Signal IC OTP (one-time | |
848 | programmable memory) support. This exposes a sysfs file to read | |
849 | out OTP values. | |
850 | ||
13a09f93 DR |
851 | config EZX_PCAP |
852 | bool "PCAP Support" | |
853 | depends on GENERIC_HARDIRQS && SPI_MASTER | |
854 | help | |
855 | This enables the PCAP ASIC present on EZX Phones. This is | |
856 | needed for MMC, TouchScreen, Sound, USB, etc.. | |
857 | ||
62579266 RV |
858 | config AB8500_CORE |
859 | bool "ST-Ericsson AB8500 Mixed Signal Power Management chip" | |
21f082a6 | 860 | depends on GENERIC_HARDIRQS && ABX500_CORE && MFD_DB8500_PRCMU |
5c854aae | 861 | select POWER_SUPPLY |
62579266 | 862 | select MFD_CORE |
06e589ef | 863 | select IRQ_DOMAIN |
0c41839e | 864 | help |
62579266 | 865 | Select this option to enable access to AB8500 power management |
6680d940 SI |
866 | chip. This connects to U8500 either on the SSP/SPI bus (deprecated |
867 | since hardware version v1.0) or the I2C bus via PRCMU. It also adds | |
868 | the irq_chip parts for handling the Mixed Signal chip events. | |
0c41839e SK |
869 | This chip embeds various other multimedia funtionalities as well. |
870 | ||
5814fc35 MW |
871 | config AB8500_DEBUG |
872 | bool "Enable debug info via debugfs" | |
873 | depends on AB8500_CORE && DEBUG_FS | |
874 | default y if DEBUG_FS | |
875 | help | |
876 | Select this option if you want debug information using the debug | |
877 | filesystem, debugfs. | |
dae2db30 AM |
878 | |
879 | config AB8500_GPADC | |
880 | bool "AB8500 GPADC driver" | |
881 | depends on AB8500_CORE && REGULATOR_AB8500 | |
882 | default y | |
883 | help | |
884 | AB8500 GPADC driver used to convert Acc and battery/ac/usb voltage | |
5814fc35 | 885 | |
650c2a21 LW |
886 | config MFD_DB8500_PRCMU |
887 | bool "ST-Ericsson DB8500 Power Reset Control Management Unit" | |
888 | depends on UX500_SOC_DB8500 | |
889 | select MFD_CORE | |
890 | help | |
891 | Select this option to enable support for the DB8500 Power Reset | |
892 | and Control Management Unit. This is basically an autonomous | |
893 | system controller running an XP70 microprocessor, which is accessed | |
894 | through a register map. | |
895 | ||
f71e1afd AS |
896 | config MFD_CS5535 |
897 | tristate "Support for CS5535 and CS5536 southbridge core functions" | |
898 | select MFD_CORE | |
15b7cf14 | 899 | depends on PCI && X86 |
f71e1afd AS |
900 | ---help--- |
901 | This is the core driver for CS5535/CS5536 MFD functions. This is | |
902 | necessary for using the board's GPIO and MFGPT functionality. | |
903 | ||
8edbede9 RR |
904 | config MFD_TIMBERDALE |
905 | tristate "Support for the Timberdale FPGA" | |
906 | select MFD_CORE | |
546e29b6 | 907 | depends on PCI && GPIOLIB |
8edbede9 RR |
908 | ---help--- |
909 | This is the core driver for the timberdale FPGA. This device is a | |
910 | multifunction device which exposes numerous platform devices. | |
911 | ||
912 | The timberdale FPGA can be found on the Intel Atom development board | |
913 | for in-vehicle infontainment, called Russellville. | |
e82c60ae DT |
914 | |
915 | config LPC_SCH | |
916 | tristate "Intel SCH LPC" | |
21f792cd | 917 | depends on PCI && GENERIC_HARDIRQS |
e82c60ae DT |
918 | select MFD_CORE |
919 | help | |
920 | LPC bridge function of the Intel SCH provides support for | |
921 | System Management Bus and General Purpose I/O. | |
922 | ||
4630b130 AS |
923 | config LPC_ICH |
924 | tristate "Intel ICH LPC" | |
21f792cd | 925 | depends on PCI && GENERIC_HARDIRQS |
4630b130 AS |
926 | select MFD_CORE |
927 | help | |
928 | The LPC bridge function of the Intel ICH provides support for | |
929 | many functional units. This driver provides needed support for | |
887c8ec7 AS |
930 | other drivers to control these functions, currently GPIO and |
931 | watchdog. | |
4630b130 | 932 | |
e090d506 FF |
933 | config MFD_RDC321X |
934 | tristate "Support for RDC-R321x southbridge" | |
935 | select MFD_CORE | |
21f792cd | 936 | depends on PCI && GENERIC_HARDIRQS |
e090d506 FF |
937 | help |
938 | Say yes here if you want to have support for the RDC R-321x SoC | |
939 | southbridge which provides access to GPIOs and Watchdog using the | |
940 | southbridge PCI device configuration space. | |
941 | ||
bd358132 IS |
942 | config MFD_JANZ_CMODIO |
943 | tristate "Support for Janz CMOD-IO PCI MODULbus Carrier Board" | |
944 | select MFD_CORE | |
21f792cd | 945 | depends on PCI && GENERIC_HARDIRQS |
bd358132 IS |
946 | help |
947 | This is the core driver for the Janz CMOD-IO PCI MODULbus | |
948 | carrier board. This device is a PCI to MODULbus bridge which may | |
949 | host many different types of MODULbus daughterboards, including | |
950 | CAN and GPIO controllers. | |
951 | ||
91f4debf | 952 | config MFD_JZ4740_ADC |
914e6d4e | 953 | bool "Support for the JZ4740 SoC ADC core" |
91f4debf | 954 | select MFD_CORE |
914e6d4e | 955 | select GENERIC_IRQ_CHIP |
91f4debf LPC |
956 | depends on MACH_JZ4740 |
957 | help | |
958 | Say yes here if you want support for the ADC unit in the JZ4740 SoC. | |
959 | This driver is necessary for jz4740-battery and jz4740-hwmon driver. | |
960 | ||
375fc77b DD |
961 | config MFD_VX855 |
962 | tristate "Support for VIA VX855/VX875 integrated south bridge" | |
21f792cd | 963 | depends on PCI && GENERIC_HARDIRQS |
375fc77b DD |
964 | select MFD_CORE |
965 | help | |
966 | Say yes here to enable support for various functions of the | |
967 | VIA VX855/VX875 south bridge. You will need to enable the vx855_spi | |
968 | and/or vx855_gpio drivers for this to do anything useful. | |
969 | ||
383268a8 | 970 | config MFD_WL1273_CORE |
94fd5b74 | 971 | tristate "Support for TI WL1273 FM radio." |
21f792cd | 972 | depends on I2C && GENERIC_HARDIRQS |
383268a8 MA |
973 | select MFD_CORE |
974 | default n | |
975 | help | |
976 | This is the core driver for the TI WL1273 FM radio. This MFD | |
977 | driver connects the radio-wl1273 V4L2 module and the wl1273 | |
978 | audio codec. | |
979 | ||
17cdd29d | 980 | config MFD_OMAP_USB_HOST |
16fa3dc7 | 981 | bool "Support OMAP USBHS core and TLL driver" |
17cdd29d KM |
982 | depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3 |
983 | default y | |
984 | help | |
985 | This is the core driver for the OAMP EHCI and OHCI drivers. | |
986 | This MFD driver does the required setup functionalities for | |
987 | OMAP USB Host drivers. | |
988 | ||
cbdb53e1 AD |
989 | config MFD_PM8XXX |
990 | tristate | |
991 | ||
992 | config MFD_PM8921_CORE | |
993 | tristate "Qualcomm PM8921 PMIC chip" | |
994 | depends on MSM_SSBI | |
995 | select MFD_CORE | |
996 | select MFD_PM8XXX | |
997 | help | |
998 | If you say yes to this option, support will be included for the | |
999 | built-in PM8921 PMIC chip. | |
1000 | ||
1001 | This is required if your board has a PM8921 and uses its features, | |
1002 | such as: MPPs, GPIOs, regulators, interrupts, and PWM. | |
1003 | ||
1004 | Say M here if you want to include support for PM8921 chip as a module. | |
1005 | This will build a module called "pm8921-core". | |
1006 | ||
c013f0a5 AD |
1007 | config MFD_PM8XXX_IRQ |
1008 | bool "Support for Qualcomm PM8xxx IRQ features" | |
1009 | depends on MFD_PM8XXX | |
1010 | default y if MFD_PM8XXX | |
1011 | help | |
1012 | This is the IRQ driver for Qualcomm PM 8xxx PMIC chips. | |
1013 | ||
1014 | This is required to use certain other PM 8xxx features, such as GPIO | |
1015 | and MPP. | |
1016 | ||
8509e142 AL |
1017 | config TPS65911_COMPARATOR |
1018 | tristate | |
1019 | ||
3c33be06 VB |
1020 | config MFD_TPS65090 |
1021 | bool "TPS65090 Power Management chips" | |
1022 | depends on I2C=y && GENERIC_HARDIRQS | |
1023 | select MFD_CORE | |
1024 | select REGMAP_I2C | |
64cdfe25 | 1025 | select REGMAP_IRQ |
3c33be06 VB |
1026 | help |
1027 | If you say yes here you get support for the TPS65090 series of | |
1028 | Power Management chips. | |
1029 | This driver provides common support for accessing the device, | |
1030 | additional drivers must be enabled in order to use the | |
1031 | functionality of the device. | |
1032 | ||
09d6292b JP |
1033 | config MFD_AAT2870_CORE |
1034 | bool "Support for the AnalogicTech AAT2870" | |
1035 | select MFD_CORE | |
21f792cd | 1036 | depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS |
09d6292b JP |
1037 | help |
1038 | If you say yes here you get support for the AAT2870. | |
1039 | This driver provides common support for accessing the device, | |
1040 | additional drivers must be enabled in order to use the | |
1041 | functionality of the device. | |
1042 | ||
1f5a371c MW |
1043 | config MFD_INTEL_MSIC |
1044 | bool "Support for Intel MSIC" | |
1045 | depends on INTEL_SCU_IPC | |
1046 | select MFD_CORE | |
1047 | help | |
1048 | Select this option to enable access to Intel MSIC (Avatele | |
1049 | Passage) chip. This chip embeds audio, battery, GPIO, etc. | |
1050 | devices used in Intel Medfield platforms. | |
1051 | ||
1b1247dd LD |
1052 | config MFD_RC5T583 |
1053 | bool "Ricoh RC5T583 Power Management system device" | |
5364d0b8 | 1054 | depends on I2C=y && GENERIC_HARDIRQS |
1b1247dd LD |
1055 | select MFD_CORE |
1056 | select REGMAP_I2C | |
1057 | help | |
1058 | Select this option to get support for the RICOH583 Power | |
1059 | Management system device. | |
1060 | This driver provides common support for accessing the device | |
1061 | through i2c interface. The device supports multiple sub-devices | |
1062 | like GPIO, interrupts, RTC, LDO and DCDC regulators, onkey. | |
1063 | Additional drivers must be enabled in order to use the | |
1064 | different functionality of the device. | |
1065 | ||
35bdd290 AR |
1066 | config MFD_STA2X11 |
1067 | bool "STA2X11 multi function device support" | |
21f792cd | 1068 | depends on STA2X11 && GENERIC_HARDIRQS |
35bdd290 | 1069 | select MFD_CORE |
d94e2553 | 1070 | select REGMAP_MMIO |
35bdd290 | 1071 | |
87d68730 DA |
1072 | config MFD_SYSCON |
1073 | bool "System Controller Register R/W Based on Regmap" | |
1074 | depends on OF | |
1075 | select REGMAP_MMIO | |
75060a1d | 1076 | help |
87d68730 DA |
1077 | Select this option to enable accessing system control registers |
1078 | via regmap. | |
75060a1d | 1079 | |
c948ef3a GG |
1080 | config MFD_PALMAS |
1081 | bool "Support for the TI Palmas series chips" | |
1082 | select MFD_CORE | |
1083 | select REGMAP_I2C | |
1084 | select REGMAP_IRQ | |
21f792cd | 1085 | depends on I2C=y && GENERIC_HARDIRQS |
c948ef3a GG |
1086 | help |
1087 | If you say yes here you get support for the Palmas | |
1088 | series of PMIC chips from Texas Instruments. | |
1089 | ||
f01312d8 LP |
1090 | config MFD_VIPERBOARD |
1091 | tristate "Support for Nano River Technologies Viperboard" | |
1092 | select MFD_CORE | |
21f792cd | 1093 | depends on USB && GENERIC_HARDIRQS |
f01312d8 LP |
1094 | default n |
1095 | help | |
1096 | Say yes here if you want support for Nano River Technologies | |
1097 | Viperboard. | |
1098 | There are mfd cell drivers available for i2c master, adc and | |
1099 | both gpios found on the board. The spi part does not yet | |
1100 | have a driver. | |
1101 | You need to select the mfd cell drivers separately. | |
1102 | The drivers do not support all features the board exposes. | |
1103 | ||
c7b76dce AK |
1104 | config MFD_RETU |
1105 | tristate "Support for Retu multi-function device" | |
1106 | select MFD_CORE | |
21f792cd | 1107 | depends on I2C && GENERIC_HARDIRQS |
c7b76dce AK |
1108 | select REGMAP_IRQ |
1109 | help | |
1110 | Retu is a multi-function device found on Nokia Internet Tablets | |
1111 | (770, N800 and N810). | |
1112 | ||
acad189b GL |
1113 | config MFD_AS3711 |
1114 | bool "Support for AS3711" | |
1115 | select MFD_CORE | |
1116 | select REGMAP_I2C | |
1117 | select REGMAP_IRQ | |
21f792cd | 1118 | depends on I2C=y && GENERIC_HARDIRQS |
acad189b GL |
1119 | help |
1120 | Support for the AS3711 PMIC from AMS | |
1121 | ||
8a0a8e8e AB |
1122 | endmenu |
1123 | endif | |
b6d6454f | 1124 | |
a4e137ab | 1125 | menu "Multimedia Capabilities Port drivers" |
f751d50f | 1126 | depends on ARCH_SA1100 |
a4e137ab RK |
1127 | |
1128 | config MCP | |
1129 | tristate | |
1130 | ||
5e742ad6 RK |
1131 | # Interface drivers |
1132 | config MCP_SA11X0 | |
1133 | tristate "Support SA11x0 MCP interface" | |
1134 | depends on ARCH_SA1100 | |
1135 | select MCP | |
1136 | ||
05c45ca9 RK |
1137 | # Chip drivers |
1138 | config MCP_UCB1200 | |
a3364409 RK |
1139 | bool "Support for UCB1200 / UCB1300" |
1140 | depends on MCP_SA11X0 | |
1141 | select MCP | |
05c45ca9 | 1142 | |
acb45439 RK |
1143 | config MCP_UCB1200_TS |
1144 | tristate "Touchscreen interface support" | |
1145 | depends on MCP_UCB1200 && INPUT | |
1146 | ||
a4e137ab | 1147 | endmenu |
3ecbf05b PM |
1148 | |
1149 | config VEXPRESS_CONFIG | |
1150 | bool | |
1151 | help | |
1152 | Platform configuration infrastructure for the ARM Ltd. | |
1153 | Versatile Express. |