Commit | Line | Data |
---|---|---|
a4e137ab RK |
1 | # |
2 | # Multifunction miscellaneous devices | |
3 | # | |
4 | ||
38270644 RD |
5 | menuconfig MFD_SUPPORT |
6 | bool "Multifunction device drivers" | |
e25df120 | 7 | depends on HAS_IOMEM |
38270644 RD |
8 | default y |
9 | help | |
15742c8a SO |
10 | Multifunction devices embed several functions (e.g. GPIOs, |
11 | touchscreens, keyboards, current regulators, power management chips, | |
12 | etc...) in one single integrated circuit. They usually talk to the | |
13 | main CPU through one or more IRQ lines and low speed data busses (SPI, | |
14 | I2C, etc..). They appear as one single device to the main system | |
15 | through the data bus and the MFD framework allows for sub devices | |
16 | (a.k.a. functions) to appear as discrete platform devices. | |
17 | MFDs are typically found on embedded platforms. | |
18 | ||
19 | This option alone does not add any kernel code. | |
38270644 RD |
20 | |
21 | if MFD_SUPPORT | |
b6d6454f | 22 | |
aa613de6 DB |
23 | config MFD_CORE |
24 | tristate | |
25 | default n | |
26 | ||
2cc50bee HZ |
27 | config MFD_88PM860X |
28 | bool "Support Marvell 88PM8606/88PM8607" | |
8d002bdc | 29 | depends on I2C=y && GENERIC_HARDIRQS |
2cc50bee HZ |
30 | select MFD_CORE |
31 | help | |
32 | This supports for Marvell 88PM8606/88PM8607 Power Management IC. | |
33 | This includes the I2C driver and the core APIs _only_, you have to | |
34 | select individual components like voltage regulators, RTC and | |
35 | battery-charger under the corresponding menus. | |
36 | ||
b6d6454f BD |
37 | config MFD_SM501 |
38 | tristate "Support for Silicon Motion SM501" | |
39 | ---help--- | |
40 | This is the core driver for the Silicon Motion SM501 multimedia | |
41 | companion chip. This device is a multifunction device which may | |
01dd2fbf ML |
42 | provide numerous interfaces including USB host controller, USB gadget, |
43 | asynchronous serial ports, audio functions, and a dual display video | |
b6d6454f BD |
44 | interface. The device may be connected by PCI or local bus with |
45 | varying functions enabled. | |
46 | ||
f61be273 BD |
47 | config MFD_SM501_GPIO |
48 | bool "Export GPIO via GPIO layer" | |
2eedd604 | 49 | depends on MFD_SM501 && GPIOLIB |
f61be273 BD |
50 | ---help--- |
51 | This option uses the gpio library layer to export the 64 GPIO | |
52 | lines on the SM501. The platform data is used to supply the | |
53 | base number for the first GPIO line to register. | |
54 | ||
fa9ff4b1 SO |
55 | config MFD_ASIC3 |
56 | bool "Support for Compaq ASIC3" | |
2eedd604 | 57 | depends on GENERIC_HARDIRQS && GPIOLIB && ARM |
9461f65a | 58 | select MFD_CORE |
fa9ff4b1 SO |
59 | ---help--- |
60 | This driver supports the ASIC3 multifunction chip found on many | |
61 | PDAs (mainly iPAQ and HTC based ones) | |
62 | ||
a87d5638 MD |
63 | config MFD_SH_MOBILE_SDHI |
64 | bool "Support for SuperH Mobile SDHI" | |
3d8ca8c0 | 65 | depends on SUPERH || ARCH_SHMOBILE |
a87d5638 | 66 | select MFD_CORE |
311f3ac7 | 67 | select TMIO_MMC_DMA |
a87d5638 MD |
68 | ---help--- |
69 | This driver supports the SDHI hardware block found in many | |
70 | SuperH Mobile SoCs. | |
71 | ||
ca26308c MA |
72 | config MFD_DAVINCI_VOICECODEC |
73 | tristate | |
74 | select MFD_CORE | |
75 | ||
0931a4c6 DB |
76 | config MFD_DM355EVM_MSP |
77 | bool "DaVinci DM355 EVM microcontroller" | |
78 | depends on I2C && MACH_DAVINCI_DM355_EVM | |
79 | help | |
80 | This driver supports the MSP430 microcontroller used on these | |
81 | boards. MSP430 firmware manages resets and power sequencing, | |
82 | inputs from buttons and the IR remote, LEDs, an RTC, and more. | |
83 | ||
a1635b8f PZ |
84 | config HTC_EGPIO |
85 | bool "HTC EGPIO support" | |
7444a72e | 86 | depends on GENERIC_HARDIRQS && GPIOLIB && ARM |
a1635b8f PZ |
87 | help |
88 | This driver supports the CPLD egpio chip present on | |
89 | several HTC phones. It provides basic support for input | |
90 | pins, output pins, and irqs. | |
91 | ||
5dc3339a PZ |
92 | config HTC_PASIC3 |
93 | tristate "HTC PASIC3 LED/DS1WM chip support" | |
0254a8f4 | 94 | select MFD_CORE |
5dc3339a PZ |
95 | help |
96 | This core driver provides register access for the LED/DS1WM | |
97 | chips labeled "AIC2" and "AIC3", found on HTC Blueangel and | |
98 | HTC Magician devices, respectively. Actual functionality is | |
99 | handled by the leds-pasic3 and ds1wm drivers. | |
100 | ||
6048a3dd CM |
101 | config HTC_I2CPLD |
102 | bool "HTC I2C PLD chip support" | |
bef3e20c | 103 | depends on I2C=y && GPIOLIB |
6048a3dd CM |
104 | help |
105 | If you say yes here you get support for the supposed CPLD | |
106 | found on omap850 HTC devices like the HTC Wizard and HTC Herald. | |
107 | This device provides input and output GPIOs through an I2C | |
108 | interface to one or more sub-chips. | |
109 | ||
d9105c2b MV |
110 | config UCB1400_CORE |
111 | tristate "Philips UCB1400 Core driver" | |
e4831802 | 112 | depends on AC97_BUS |
5a49a540 | 113 | depends on GPIOLIB |
d9105c2b MV |
114 | help |
115 | This enables support for the Philips UCB1400 core functions. | |
116 | The UCB1400 is an AC97 audio codec. | |
117 | ||
118 | To compile this driver as a module, choose M here: the | |
119 | module will be called ucb1400_core. | |
120 | ||
87c13493 DB |
121 | config TPS65010 |
122 | tristate "TPS6501x Power Management chips" | |
123 | depends on I2C && GPIOLIB | |
124 | default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK | |
125 | help | |
126 | If you say yes here you get support for the TPS6501x series of | |
127 | Power Management chips. These include voltage regulators, | |
128 | lithium ion/polymer battery charging, and other features that | |
129 | are often used in portable devices like cell phones and cameras. | |
130 | ||
131 | This driver can also be built as a module. If so, the module | |
132 | will be called tps65010. | |
133 | ||
31dd6a26 TF |
134 | config TPS6507X |
135 | tristate "TPS6507x Power Management / Touch Screen chips" | |
136 | select MFD_CORE | |
137 | depends on I2C | |
138 | help | |
139 | If you say yes here you get support for the TPS6507x series of | |
140 | Power Management / Touch Screen chips. These include voltage | |
141 | regulators, lithium ion/polymer battery charging, touch screen | |
142 | and other features that are often used in portable devices. | |
143 | This driver can also be built as a module. If so, the module | |
144 | will be called tps6507x. | |
145 | ||
88e75cc3 DB |
146 | config MENELAUS |
147 | bool "Texas Instruments TWL92330/Menelaus PM chip" | |
088ef950 | 148 | depends on I2C=y && ARCH_OMAP2 |
88e75cc3 DB |
149 | help |
150 | If you say yes here you get support for the Texas Instruments | |
151 | TWL92330/Menelaus Power Management chip. This include voltage | |
692105b8 | 152 | regulators, Dual slot memory card transceivers, real-time clock |
88e75cc3 DB |
153 | and other features that are often used in portable devices like |
154 | cell phones and PDAs. | |
155 | ||
a603a7fa | 156 | config TWL4030_CORE |
e8deb28c | 157 | bool "Texas Instruments TWL4030/TWL5030/TWL6030/TPS659x0 Support" |
67460a7c | 158 | depends on I2C=y && GENERIC_HARDIRQS |
a603a7fa | 159 | help |
e8deb28c | 160 | Say yes here if you have TWL4030 / TWL6030 family chip on your board. |
a603a7fa DB |
161 | This core driver provides register access and IRQ handling |
162 | facilities, and registers devices for the various functions | |
163 | so that function-specific drivers can bind to them. | |
164 | ||
165 | These multi-function chips are found on many OMAP2 and OMAP3 | |
166 | boards, providing power management, RTC, GPIO, keypad, a | |
167 | high speed USB OTG transceiver, an audio codec (on most | |
168 | versions) and many other features. | |
169 | ||
ebf0bd36 AK |
170 | config TWL4030_POWER |
171 | bool "Support power resources on TWL4030 family chips" | |
172 | depends on TWL4030_CORE && ARM | |
173 | help | |
174 | Say yes here if you want to use the power resources on the | |
175 | TWL4030 family chips. Most of these resources are regulators, | |
176 | which have a separate driver; some are control signals, such | |
177 | as clock request handshaking. | |
178 | ||
179 | This driver uses board-specific data to initialize the resources | |
180 | and load scripts controling which resources are switched off/on | |
181 | or reset when a sleep, wakeup or warm reset event occurs. | |
182 | ||
0b83ddeb PU |
183 | config TWL4030_CODEC |
184 | bool | |
185 | depends on TWL4030_CORE | |
186 | select MFD_CORE | |
187 | default n | |
188 | ||
31fc03df H |
189 | config TWL6030_PWM |
190 | tristate "TWL6030 PWM (Pulse Width Modulator) Support" | |
191 | depends on TWL4030_CORE | |
192 | select HAVE_PWM | |
193 | default n | |
194 | help | |
195 | Say yes here if you want support for TWL6030 PWM. | |
196 | This is used to control charging LED brightness. | |
197 | ||
27e34995 RV |
198 | config MFD_STMPE |
199 | bool "Support STMicroelectronics STMPE" | |
200 | depends on I2C=y && GENERIC_HARDIRQS | |
201 | select MFD_CORE | |
202 | help | |
203 | Support for the STMPE family of I/O Expanders from | |
204 | STMicroelectronics. | |
205 | ||
206 | Currently supported devices are: | |
207 | ||
208 | STMPE811: GPIO, Touchscreen | |
209 | STMPE1601: GPIO, Keypad | |
210 | STMPE2401: GPIO, Keypad | |
211 | STMPE2403: GPIO, Keypad | |
212 | ||
213 | This driver provides common support for accessing the device, | |
214 | additional drivers must be enabled in order to use the functionality | |
215 | of the device. Currently available sub drivers are: | |
216 | ||
217 | GPIO: stmpe-gpio | |
218 | Keypad: stmpe-keypad | |
219 | Touchscreen: stmpe-ts | |
220 | ||
b4ecd326 RV |
221 | config MFD_TC35892 |
222 | bool "Support Toshiba TC35892" | |
223 | depends on I2C=y && GENERIC_HARDIRQS | |
224 | select MFD_CORE | |
225 | help | |
226 | Support for the Toshiba TC35892 I/O Expander. | |
227 | ||
228 | This driver provides common support for accessing the device, | |
229 | additional drivers must be enabled in order to use the | |
230 | functionality of the device. | |
231 | ||
1c2c30ac SO |
232 | config MFD_TMIO |
233 | bool | |
234 | default n | |
235 | ||
311f3ac7 GL |
236 | config TMIO_MMC_DMA |
237 | bool | |
238 | select DMA_ENGINE | |
239 | select DMADEVICES | |
240 | ||
1f192015 IM |
241 | config MFD_T7L66XB |
242 | bool "Support Toshiba T7L66XB" | |
9ca68233 | 243 | depends on ARM && HAVE_CLK |
1f192015 | 244 | select MFD_CORE |
1c2c30ac | 245 | select MFD_TMIO |
1f192015 IM |
246 | help |
247 | Support for Toshiba Mobile IO Controller T7L66XB | |
248 | ||
cbdfb426 IM |
249 | config MFD_TC6387XB |
250 | bool "Support Toshiba TC6387XB" | |
9ca68233 | 251 | depends on ARM && HAVE_CLK |
cbdfb426 | 252 | select MFD_CORE |
1c2c30ac | 253 | select MFD_TMIO |
cbdfb426 IM |
254 | help |
255 | Support for Toshiba Mobile IO Controller TC6387XB | |
256 | ||
d6315949 DB |
257 | config MFD_TC6393XB |
258 | bool "Support Toshiba TC6393XB" | |
8d25b36b | 259 | depends on GPIOLIB && ARM |
f024ff10 | 260 | select MFD_CORE |
1c2c30ac | 261 | select MFD_TMIO |
d6315949 DB |
262 | help |
263 | Support for Toshiba Mobile IO Controller TC6393XB | |
264 | ||
8e2eaabf SO |
265 | config PMIC_DA903X |
266 | bool "Dialog Semiconductor DA9030/DA9034 PMIC Support" | |
267 | depends on I2C=y | |
268 | help | |
269 | Say yes here to support for Dialog Semiconductor DA9030 (a.k.a | |
270 | ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC | |
271 | usually found on PXA processors-based platforms. This includes | |
272 | the I2C driver and the core APIs _only_, you have to select | |
273 | individual components like LCD backlight, voltage regulators, | |
274 | LEDs and battery-charger under the corresponding menus. | |
a5736e0b MH |
275 | |
276 | config PMIC_ADP5520 | |
277 | bool "Analog Devices ADP5520/01 MFD PMIC Core Support" | |
278 | depends on I2C=y | |
279 | help | |
280 | Say yes here to add support for Analog Devices AD5520 and ADP5501, | |
281 | Multifunction Power Management IC. This includes | |
282 | the I2C driver and the core APIs _only_, you have to select | |
283 | individual components like LCD backlight, LEDs, GPIOs and Kepad | |
284 | under the corresponding menus. | |
8e2eaabf | 285 | |
d50f8f33 | 286 | config MFD_MAX8925 |
1f1cf8f9 | 287 | bool "Maxim Semiconductor MAX8925 PMIC Support" |
8d002bdc | 288 | depends on I2C=y && GENERIC_HARDIRQS |
1ad99893 | 289 | select MFD_CORE |
d50f8f33 HZ |
290 | help |
291 | Say yes here to support for Maxim Semiconductor MAX8925. This is | |
292 | a Power Management IC. This driver provies common support for | |
293 | accessing the device, additional drivers must be enabled in order | |
294 | to use the functionality of the device. | |
295 | ||
156f2528 | 296 | config MFD_MAX8998 |
f8539ddc | 297 | bool "Maxim Semiconductor MAX8998/National LP3974 PMIC Support" |
156f2528 KP |
298 | depends on I2C=y |
299 | select MFD_CORE | |
300 | help | |
f8539ddc KP |
301 | Say yes here to support for Maxim Semiconductor MAX8998 and |
302 | National Semiconductor LP3974. This is a Power Management IC. | |
303 | This driver provies common support for accessing the device, | |
304 | additional drivers must be enabled in order to use the functionality | |
305 | of the device. | |
156f2528 | 306 | |
1d9f9f04 MB |
307 | config MFD_WM8400 |
308 | tristate "Support Wolfson Microelectronics WM8400" | |
b8380c1a | 309 | select MFD_CORE |
9c366452 | 310 | depends on I2C |
1d9f9f04 MB |
311 | help |
312 | Support for the Wolfson Microelecronics WM8400 PMIC and audio | |
9e5aca58 | 313 | CODEC. This driver provides common support for accessing |
1d9f9f04 MB |
314 | the device, additional drivers must be enabled in order to use |
315 | the functionality of the device. | |
316 | ||
b11062b9 | 317 | config MFD_WM831X |
6e40173d | 318 | bool "Support Wolfson Microelectronics WM831x/2x PMICs" |
b11062b9 | 319 | select MFD_CORE |
8d002bdc | 320 | depends on I2C=y && GENERIC_HARDIRQS |
b11062b9 | 321 | help |
d4e0a89e MB |
322 | Support for the Wolfson Microelecronics WM831x and WM832x PMICs. |
323 | This driver provides common support for accessing the device, | |
b11062b9 MB |
324 | additional drivers must be enabled in order to use the |
325 | functionality of the device. | |
326 | ||
89b4012b | 327 | config MFD_WM8350 |
ecf926bc | 328 | bool |
8d002bdc | 329 | depends on GENERIC_HARDIRQS |
89b4012b MB |
330 | |
331 | config MFD_WM8350_CONFIG_MODE_0 | |
332 | bool | |
333 | depends on MFD_WM8350 | |
334 | ||
335 | config MFD_WM8350_CONFIG_MODE_1 | |
336 | bool | |
337 | depends on MFD_WM8350 | |
338 | ||
339 | config MFD_WM8350_CONFIG_MODE_2 | |
340 | bool | |
341 | depends on MFD_WM8350 | |
342 | ||
343 | config MFD_WM8350_CONFIG_MODE_3 | |
344 | bool | |
345 | depends on MFD_WM8350 | |
346 | ||
ca23f8c1 MB |
347 | config MFD_WM8351_CONFIG_MODE_0 |
348 | bool | |
349 | depends on MFD_WM8350 | |
350 | ||
351 | config MFD_WM8351_CONFIG_MODE_1 | |
352 | bool | |
353 | depends on MFD_WM8350 | |
354 | ||
355 | config MFD_WM8351_CONFIG_MODE_2 | |
356 | bool | |
357 | depends on MFD_WM8350 | |
358 | ||
359 | config MFD_WM8351_CONFIG_MODE_3 | |
360 | bool | |
361 | depends on MFD_WM8350 | |
362 | ||
96920630 MB |
363 | config MFD_WM8352_CONFIG_MODE_0 |
364 | bool | |
365 | depends on MFD_WM8350 | |
366 | ||
367 | config MFD_WM8352_CONFIG_MODE_1 | |
368 | bool | |
369 | depends on MFD_WM8350 | |
370 | ||
371 | config MFD_WM8352_CONFIG_MODE_2 | |
372 | bool | |
373 | depends on MFD_WM8350 | |
374 | ||
375 | config MFD_WM8352_CONFIG_MODE_3 | |
376 | bool | |
377 | depends on MFD_WM8350 | |
378 | ||
c661a0b9 | 379 | config MFD_WM8350_I2C |
ecf926bc | 380 | bool "Support Wolfson Microelectronics WM8350 with I2C" |
c661a0b9 | 381 | select MFD_WM8350 |
8d002bdc | 382 | depends on I2C=y && GENERIC_HARDIRQS |
c661a0b9 MB |
383 | help |
384 | The WM8350 is an integrated audio and power management | |
385 | subsystem with watchdog and RTC functionality for embedded | |
386 | systems. This option enables core support for the WM8350 with | |
387 | I2C as the control interface. Additional options must be | |
388 | selected to enable support for the functionality of the chip. | |
389 | ||
9e501086 | 390 | config MFD_WM8994 |
c9fbf7e0 | 391 | bool "Support Wolfson Microelectronics WM8994" |
9e501086 | 392 | select MFD_CORE |
c9fbf7e0 | 393 | depends on I2C=y && GENERIC_HARDIRQS |
9e501086 MB |
394 | help |
395 | The WM8994 is a highly integrated hi-fi CODEC designed for | |
396 | smartphone applicatiosn. As well as audio functionality it | |
397 | has on board GPIO and regulator functionality which is | |
398 | supported via the relevant subsystems. This driver provides | |
399 | core support for the WM8994, in order to use the actual | |
400 | functionaltiy of the device other drivers must be enabled. | |
401 | ||
f52046b1 BR |
402 | config MFD_PCF50633 |
403 | tristate "Support for NXP PCF50633" | |
404 | depends on I2C | |
405 | help | |
406 | Say yes here if you have NXP PCF50633 chip on your board. | |
407 | This core driver provides register access and IRQ handling | |
408 | facilities, and registers devices for the various functions | |
409 | so that function-specific drivers can bind to them. | |
410 | ||
8238addc SH |
411 | config MFD_MC13783 |
412 | tristate "Support Freescale MC13783" | |
413 | depends on SPI_MASTER | |
414 | select MFD_CORE | |
415 | help | |
416 | Support for the Freescale (Atlas) MC13783 PMIC and audio CODEC. | |
417 | This driver provides common support for accessing the device, | |
418 | additional drivers must be enabled in order to use the | |
419 | functionality of the device. | |
420 | ||
08c3e06a BR |
421 | config PCF50633_ADC |
422 | tristate "Support for NXP PCF50633 ADC" | |
423 | depends on MFD_PCF50633 | |
424 | help | |
425 | Say yes here if you want to include support for ADC in the | |
426 | NXP PCF50633 chip. | |
427 | ||
6a3d119b BR |
428 | config PCF50633_GPIO |
429 | tristate "Support for NXP PCF50633 GPIO" | |
430 | depends on MFD_PCF50633 | |
431 | help | |
432 | Say yes here if you want to include support GPIO for pins on | |
433 | the PCF50633 chip. | |
434 | ||
fa661258 MW |
435 | config ABX500_CORE |
436 | bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions" | |
437 | default y if ARCH_U300 | |
438 | help | |
439 | Say yes here if you have the ABX500 Mixed Signal IC family | |
440 | chips. This core driver expose register access functions. | |
441 | Functionality specific drivers using these functions can | |
442 | remain unchanged when IC changes. Binding of the functions to | |
443 | actual register access is done by the IC core driver. | |
444 | ||
14fa5691 | 445 | config AB3100_CORE |
2071db48 | 446 | bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions" |
fa661258 | 447 | depends on I2C=y && ABX500_CORE |
8c96aefb | 448 | select MFD_CORE |
14fa5691 LW |
449 | default y if ARCH_U300 |
450 | help | |
451 | Select this to enable the AB3100 Mixed Signal IC core | |
452 | functionality. This connects to a AB3100 on the I2C bus | |
453 | and expose a number of symbols needed for dependent devices | |
454 | to read and write registers and subscribe to events from | |
455 | this multi-functional IC. This is needed to use other features | |
456 | of the AB3100 such as battery-backed RTC, charging control, | |
457 | LEDs, vibrator, system power and temperature, power management | |
458 | and ALSA sound. | |
459 | ||
12992dd8 LW |
460 | config AB3100_OTP |
461 | tristate "ST-Ericsson AB3100 OTP functions" | |
462 | depends on AB3100_CORE | |
463 | default y if AB3100_CORE | |
464 | help | |
465 | Select this to enable the AB3100 Mixed Signal IC OTP (one-time | |
466 | programmable memory) support. This exposes a sysfs file to read | |
467 | out OTP values. | |
468 | ||
13a09f93 DR |
469 | config EZX_PCAP |
470 | bool "PCAP Support" | |
471 | depends on GENERIC_HARDIRQS && SPI_MASTER | |
472 | help | |
473 | This enables the PCAP ASIC present on EZX Phones. This is | |
474 | needed for MMC, TouchScreen, Sound, USB, etc.. | |
475 | ||
62579266 RV |
476 | config AB8500_CORE |
477 | bool "ST-Ericsson AB8500 Mixed Signal Power Management chip" | |
478 | depends on SPI=y && GENERIC_HARDIRQS | |
479 | select MFD_CORE | |
0c41839e | 480 | help |
62579266 | 481 | Select this option to enable access to AB8500 power management |
0c41839e SK |
482 | chip. This connects to U8500 on the SSP/SPI bus and exports |
483 | read/write functions for the devices to get access to this chip. | |
484 | This chip embeds various other multimedia funtionalities as well. | |
485 | ||
09bcb3f3 MW |
486 | config AB3550_CORE |
487 | bool "ST-Ericsson AB3550 Mixed Signal Circuit core functions" | |
488 | select MFD_CORE | |
489 | depends on I2C=y && GENERIC_HARDIRQS && ABX500_CORE | |
490 | help | |
491 | Select this to enable the AB3550 Mixed Signal IC core | |
492 | functionality. This connects to a AB3550 on the I2C bus | |
493 | and expose a number of symbols needed for dependent devices | |
494 | to read and write registers and subscribe to events from | |
495 | this multi-functional IC. This is needed to use other features | |
496 | of the AB3550 such as battery-backed RTC, charging control, | |
497 | LEDs, vibrator, system power and temperature, power management | |
498 | and ALSA sound. | |
499 | ||
8edbede9 RR |
500 | config MFD_TIMBERDALE |
501 | tristate "Support for the Timberdale FPGA" | |
502 | select MFD_CORE | |
546e29b6 | 503 | depends on PCI && GPIOLIB |
8edbede9 RR |
504 | ---help--- |
505 | This is the core driver for the timberdale FPGA. This device is a | |
506 | multifunction device which exposes numerous platform devices. | |
507 | ||
508 | The timberdale FPGA can be found on the Intel Atom development board | |
509 | for in-vehicle infontainment, called Russellville. | |
e82c60ae DT |
510 | |
511 | config LPC_SCH | |
512 | tristate "Intel SCH LPC" | |
513 | depends on PCI | |
514 | select MFD_CORE | |
515 | help | |
516 | LPC bridge function of the Intel SCH provides support for | |
517 | System Management Bus and General Purpose I/O. | |
518 | ||
e090d506 FF |
519 | config MFD_RDC321X |
520 | tristate "Support for RDC-R321x southbridge" | |
521 | select MFD_CORE | |
522 | depends on PCI | |
523 | help | |
524 | Say yes here if you want to have support for the RDC R-321x SoC | |
525 | southbridge which provides access to GPIOs and Watchdog using the | |
526 | southbridge PCI device configuration space. | |
527 | ||
bd358132 IS |
528 | config MFD_JANZ_CMODIO |
529 | tristate "Support for Janz CMOD-IO PCI MODULbus Carrier Board" | |
530 | select MFD_CORE | |
531 | depends on PCI | |
532 | help | |
533 | This is the core driver for the Janz CMOD-IO PCI MODULbus | |
534 | carrier board. This device is a PCI to MODULbus bridge which may | |
535 | host many different types of MODULbus daughterboards, including | |
536 | CAN and GPIO controllers. | |
537 | ||
91f4debf LPC |
538 | config MFD_JZ4740_ADC |
539 | tristate "Support for the JZ4740 SoC ADC core" | |
540 | select MFD_CORE | |
541 | depends on MACH_JZ4740 | |
542 | help | |
543 | Say yes here if you want support for the ADC unit in the JZ4740 SoC. | |
544 | This driver is necessary for jz4740-battery and jz4740-hwmon driver. | |
545 | ||
c6c19332 MR |
546 | config MFD_TPS6586X |
547 | tristate "TPS6586x Power Management chips" | |
548 | depends on I2C && GPIOLIB | |
549 | select MFD_CORE | |
550 | help | |
551 | If you say yes here you get support for the TPS6586X series of | |
552 | Power Management chips. | |
553 | This driver provides common support for accessing the device, | |
554 | additional drivers must be enabled in order to use the | |
555 | functionality of the device. | |
556 | ||
557 | This driver can also be built as a module. If so, the module | |
558 | will be called tps6586x. | |
559 | ||
38270644 | 560 | endif # MFD_SUPPORT |
b6d6454f | 561 | |
a4e137ab | 562 | menu "Multimedia Capabilities Port drivers" |
f751d50f | 563 | depends on ARCH_SA1100 |
a4e137ab RK |
564 | |
565 | config MCP | |
566 | tristate | |
567 | ||
5e742ad6 RK |
568 | # Interface drivers |
569 | config MCP_SA11X0 | |
570 | tristate "Support SA11x0 MCP interface" | |
571 | depends on ARCH_SA1100 | |
572 | select MCP | |
573 | ||
05c45ca9 RK |
574 | # Chip drivers |
575 | config MCP_UCB1200 | |
576 | tristate "Support for UCB1200 / UCB1300" | |
577 | depends on MCP | |
578 | ||
acb45439 RK |
579 | config MCP_UCB1200_TS |
580 | tristate "Touchscreen interface support" | |
581 | depends on MCP_UCB1200 && INPUT | |
582 | ||
a4e137ab | 583 | endmenu |