projects / deliverable / linux.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
Merge tag 'r8169-20060912-00' of git://electric-eye.fr.zoreil.com/home/romieu/linux...
[deliverable/linux.git] / drivers / mmc / au1xmmc.c
CommitLineData
ba264b34
PP		 1/*
2 * linux/drivers/mmc/au1xmmc.c - AU1XX0 MMC driver
3 *
4 * Copyright (c) 2005, Advanced Micro Devices, Inc.
5 *
6 * Developed with help from the 2.4.30 MMC AU1XXX controller including
7 * the following copyright notices:
8 * Copyright (c) 2003-2004 Embedded Edge, LLC.
9 * Portions Copyright (C) 2002 Embedix, Inc
10 * Copyright 2002 Hewlett-Packard Company
11
12 * 2.6 version of this driver inspired by:
13 * (drivers/mmc/wbsd.c) Copyright (C) 2004-2005 Pierre Ossman,
14 * All Rights Reserved.
15 * (drivers/mmc/pxa.c) Copyright (C) 2003 Russell King,
16 * All Rights Reserved.
17 *
18
19 * This program is free software; you can redistribute it and/or modify
20 * it under the terms of the GNU General Public License version 2 as
21 * published by the Free Software Foundation.
22 */
23
24/* Why is a timer used to detect insert events?
25 *
26 * From the AU1100 MMC application guide:
27 * If the Au1100-based design is intended to support both MultiMediaCards
28 * and 1- or 4-data bit SecureDigital cards, then the solution is to
29 * connect a weak (560KOhm) pull-up resistor to connector pin 1.
30 * In doing so, a MMC card never enters SPI-mode communications,
31 * but now the SecureDigital card-detect feature of CD/DAT3 is ineffective
32 * (the low to high transition will not occur).
33 *
34 * So we use the timer to check the status manually.
35 */
36
ba264b34
PP		 37#include <linux/module.h>
38#include <linux/init.h>
b256f9df 39#include <linux/platform_device.h>
ba264b34
PP		 40#include <linux/mm.h>
41#include <linux/interrupt.h>
42#include <linux/dma-mapping.h>
43
44#include <linux/mmc/host.h>
45#include <linux/mmc/protocol.h>
46#include <asm/io.h>
47#include <asm/mach-au1x00/au1000.h>
48#include <asm/mach-au1x00/au1xxx_dbdma.h>
49#include <asm/mach-au1x00/au1100_mmc.h>
50#include <asm/scatterlist.h>
51
52#include <au1xxx.h>
53#include "au1xmmc.h"
54
55#define DRIVER_NAME "au1xxx-mmc"
56
57/* Set this to enable special debugging macros */
ba264b34 58
c6563178
RK		 59#ifdef DEBUG
60#define DBG(fmt, idx, args...) printk("au1xx(%d): DEBUG: " fmt, idx, ##args)
ba264b34 61#else
c6563178 62#define DBG(fmt, idx, args...)
ba264b34
PP		 63#endif
64
65const struct {
66 u32 iobase;
67 u32 tx_devid, rx_devid;
68 u16 bcsrpwr;
69 u16 bcsrstatus;
70 u16 wpstatus;
71} au1xmmc_card_table[] = {
72 { SD0_BASE, DSCR_CMD0_SDMS_TX0, DSCR_CMD0_SDMS_RX0,
73 BCSR_BOARD_SD0PWR, BCSR_INT_SD0INSERT, BCSR_STATUS_SD0WP },
74#ifndef CONFIG_MIPS_DB1200
75 { SD1_BASE, DSCR_CMD0_SDMS_TX1, DSCR_CMD0_SDMS_RX1,
76 BCSR_BOARD_DS1PWR, BCSR_INT_SD1INSERT, BCSR_STATUS_SD1WP }
77#endif
78};
79
80#define AU1XMMC_CONTROLLER_COUNT \
81 (sizeof(au1xmmc_card_table) / sizeof(au1xmmc_card_table[0]))
82
83/* This array stores pointers for the hosts (used by the IRQ handler) */
84struct au1xmmc_host *au1xmmc_hosts[AU1XMMC_CONTROLLER_COUNT];
85static int dma = 1;
86
87#ifdef MODULE
8d3b33f6 88module_param(dma, bool, 0);
ba264b34
PP		 89MODULE_PARM_DESC(dma, "Use DMA engine for data transfers (0 = disabled)");
90#endif
91
92static inline void IRQ_ON(struct au1xmmc_host *host, u32 mask)
93{
94 u32 val = au_readl(HOST_CONFIG(host));
95 val |= mask;
96 au_writel(val, HOST_CONFIG(host));
97 au_sync();
98}
99
100static inline void FLUSH_FIFO(struct au1xmmc_host *host)
101{
102 u32 val = au_readl(HOST_CONFIG2(host));
103
104 au_writel(val | SD_CONFIG2_FF, HOST_CONFIG2(host));
105 au_sync_delay(1);
106
107 /* SEND_STOP will turn off clock control - this re-enables it */
108 val &= ~SD_CONFIG2_DF;
109
110 au_writel(val, HOST_CONFIG2(host));
111 au_sync();
112}
113
114static inline void IRQ_OFF(struct au1xmmc_host *host, u32 mask)
115{
116 u32 val = au_readl(HOST_CONFIG(host));
117 val &= ~mask;
118 au_writel(val, HOST_CONFIG(host));
119 au_sync();
120}
121
122static inline void SEND_STOP(struct au1xmmc_host *host)
123{
124
125 /* We know the value of CONFIG2, so avoid a read we don't need */
126 u32 mask = SD_CONFIG2_EN;
127
128 WARN_ON(host->status != HOST_S_DATA);
129 host->status = HOST_S_STOP;
130
131 au_writel(mask | SD_CONFIG2_DF, HOST_CONFIG2(host));
132 au_sync();
133
134 /* Send the stop commmand */
135 au_writel(STOP_CMD, HOST_CMD(host));
136}
137
138static void au1xmmc_set_power(struct au1xmmc_host *host, int state)
139{
140
141 u32 val = au1xmmc_card_table[host->id].bcsrpwr;
142
143 bcsr->board &= ~val;
144 if (state) bcsr->board |= val;
145
146 au_sync_delay(1);
147}
148
149static inline int au1xmmc_card_inserted(struct au1xmmc_host *host)
150{
151 return (bcsr->sig_status & au1xmmc_card_table[host->id].bcsrstatus)
152 ? 1 : 0;
153}
154
155static inline int au1xmmc_card_readonly(struct au1xmmc_host *host)
156{
157 return (bcsr->status & au1xmmc_card_table[host->id].wpstatus)
158 ? 1 : 0;
159}
160
161static void au1xmmc_finish_request(struct au1xmmc_host *host)
162{
163
164 struct mmc_request *mrq = host->mrq;
165
166 host->mrq = NULL;
167 host->flags &= HOST_F_ACTIVE;
168
169 host->dma.len = 0;
170 host->dma.dir = 0;
171
172 host->pio.index = 0;
173 host->pio.offset = 0;
174 host->pio.len = 0;
175
176 host->status = HOST_S_IDLE;
177
178 bcsr->disk_leds |= (1 << 8);
179
180 mmc_request_done(host->mmc, mrq);
181}
182
183static void au1xmmc_tasklet_finish(unsigned long param)
184{
185 struct au1xmmc_host *host = (struct au1xmmc_host *) param;
186 au1xmmc_finish_request(host);
187}
188
189static int au1xmmc_send_command(struct au1xmmc_host *host, int wait,
190 struct mmc_command *cmd)
191{
192
193 u32 mmccmd = (cmd->opcode << SD_CMD_CI_SHIFT);
194
e142c24c 195 switch (mmc_resp_type(cmd)) {
ba264b34
PP		 196 case MMC_RSP_R1:
197 mmccmd |= SD_CMD_RT_1;
198 break;
199 case MMC_RSP_R1B:
200 mmccmd |= SD_CMD_RT_1B;
201 break;
202 case MMC_RSP_R2:
203 mmccmd |= SD_CMD_RT_2;
204 break;
205 case MMC_RSP_R3:
206 mmccmd |= SD_CMD_RT_3;
207 break;
208 }
209
210 switch(cmd->opcode) {
211 case MMC_READ_SINGLE_BLOCK:
212 case SD_APP_SEND_SCR:
213 mmccmd |= SD_CMD_CT_2;
214 break;
215 case MMC_READ_MULTIPLE_BLOCK:
216 mmccmd |= SD_CMD_CT_4;
217 break;
218 case MMC_WRITE_BLOCK:
219 mmccmd |= SD_CMD_CT_1;
220 break;
221
222 case MMC_WRITE_MULTIPLE_BLOCK:
223 mmccmd |= SD_CMD_CT_3;
224 break;
225 case MMC_STOP_TRANSMISSION:
226 mmccmd |= SD_CMD_CT_7;
227 break;
228 }
229
230 au_writel(cmd->arg, HOST_CMDARG(host));
231 au_sync();
232
233 if (wait)
234 IRQ_OFF(host, SD_CONFIG_CR);
235
236 au_writel((mmccmd | SD_CMD_GO), HOST_CMD(host));
237 au_sync();
238
239 /* Wait for the command to go on the line */
240
241 while(1) {
242 if (!(au_readl(HOST_CMD(host)) & SD_CMD_GO))
243 break;
244 }
245
246 /* Wait for the command to come back */
247
248 if (wait) {
249 u32 status = au_readl(HOST_STATUS(host));
250
251 while(!(status & SD_STATUS_CR))
252 status = au_readl(HOST_STATUS(host));
253
254 /* Clear the CR status */
255 au_writel(SD_STATUS_CR, HOST_STATUS(host));
256
257 IRQ_ON(host, SD_CONFIG_CR);
258 }
259
260 return MMC_ERR_NONE;
261}
262
263static void au1xmmc_data_complete(struct au1xmmc_host *host, u32 status)
264{
265
266 struct mmc_request *mrq = host->mrq;
267 struct mmc_data *data;
268 u32 crc;
269
270 WARN_ON(host->status != HOST_S_DATA && host->status != HOST_S_STOP);
271
272 if (host->mrq == NULL)
273 return;
274
275 data = mrq->cmd->data;
276
277 if (status == 0)
278 status = au_readl(HOST_STATUS(host));
279
280 /* The transaction is really over when the SD_STATUS_DB bit is clear */
281
282 while((host->flags & HOST_F_XMIT) && (status & SD_STATUS_DB))
283 status = au_readl(HOST_STATUS(host));
284
285 data->error = MMC_ERR_NONE;
286 dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len, host->dma.dir);
287
288 /* Process any errors */
289
290 crc = (status & (SD_STATUS_WC | SD_STATUS_RC));
291 if (host->flags & HOST_F_XMIT)
292 crc |= ((status & 0x07) == 0x02) ? 0 : 1;
293
294 if (crc)
295 data->error = MMC_ERR_BADCRC;
296
297 /* Clear the CRC bits */
298 au_writel(SD_STATUS_WC | SD_STATUS_RC, HOST_STATUS(host));
299
300 data->bytes_xfered = 0;
301
302 if (data->error == MMC_ERR_NONE) {
303 if (host->flags & HOST_F_DMA) {
304 u32 chan = DMA_CHANNEL(host);
305
306 chan_tab_t *c = *((chan_tab_t **) chan);
307 au1x_dma_chan_t *cp = c->chan_ptr;
308 data->bytes_xfered = cp->ddma_bytecnt;
309 }
310 else
311 data->bytes_xfered =
2c171bf1 312 (data->blocks * data->blksz) -
ba264b34
PP		 313 host->pio.len;
314 }
315
316 au1xmmc_finish_request(host);
317}
318
319static void au1xmmc_tasklet_data(unsigned long param)
320{
321 struct au1xmmc_host *host = (struct au1xmmc_host *) param;
322
323 u32 status = au_readl(HOST_STATUS(host));
324 au1xmmc_data_complete(host, status);
325}
326
327#define AU1XMMC_MAX_TRANSFER 8
328
329static void au1xmmc_send_pio(struct au1xmmc_host *host)
330{
331
332 struct mmc_data *data = 0;
333 int sg_len, max, count = 0;
334 unsigned char *sg_ptr;
335 u32 status = 0;
336 struct scatterlist *sg;
337
338 data = host->mrq->data;
339
340 if (!(host->flags & HOST_F_XMIT))
341 return;
342
343 /* This is the pointer to the data buffer */
344 sg = &data->sg[host->pio.index];
345 sg_ptr = page_address(sg->page) + sg->offset + host->pio.offset;
346
347 /* This is the space left inside the buffer */
348 sg_len = data->sg[host->pio.index].length - host->pio.offset;
349
350 /* Check to if we need less then the size of the sg_buffer */
351
352 max = (sg_len > host->pio.len) ? host->pio.len : sg_len;
353 if (max > AU1XMMC_MAX_TRANSFER) max = AU1XMMC_MAX_TRANSFER;
354
355 for(count = 0; count < max; count++ ) {
356 unsigned char val;
357
358 status = au_readl(HOST_STATUS(host));
359
360 if (!(status & SD_STATUS_TH))
361 break;
362
363 val = *sg_ptr++;
364
365 au_writel((unsigned long) val, HOST_TXPORT(host));
366 au_sync();
367 }
368
369 host->pio.len -= count;
370 host->pio.offset += count;
371
372 if (count == sg_len) {
373 host->pio.index++;
374 host->pio.offset = 0;
375 }
376
377 if (host->pio.len == 0) {
378 IRQ_OFF(host, SD_CONFIG_TH);
379
380 if (host->flags & HOST_F_STOP)
381 SEND_STOP(host);
382
383 tasklet_schedule(&host->data_task);
384 }
385}
386
387static void au1xmmc_receive_pio(struct au1xmmc_host *host)
388{
389
390 struct mmc_data *data = 0;
391 int sg_len = 0, max = 0, count = 0;
392 unsigned char *sg_ptr = 0;
393 u32 status = 0;
394 struct scatterlist *sg;
395
396 data = host->mrq->data;
397
398 if (!(host->flags & HOST_F_RECV))
399 return;
400
401 max = host->pio.len;
402
403 if (host->pio.index < host->dma.len) {
404 sg = &data->sg[host->pio.index];
405 sg_ptr = page_address(sg->page) + sg->offset + host->pio.offset;
406
407 /* This is the space left inside the buffer */
408 sg_len = sg_dma_len(&data->sg[host->pio.index]) - host->pio.offset;
409
410 /* Check to if we need less then the size of the sg_buffer */
411 if (sg_len < max) max = sg_len;
412 }
413
414 if (max > AU1XMMC_MAX_TRANSFER)
415 max = AU1XMMC_MAX_TRANSFER;
416
417 for(count = 0; count < max; count++ ) {
418 u32 val;
419 status = au_readl(HOST_STATUS(host));
420
421 if (!(status & SD_STATUS_NE))
422 break;
423
424 if (status & SD_STATUS_RC) {
c6563178 425 DBG("RX CRC Error [%d + %d].\n", host->id,
ba264b34
PP		 426 host->pio.len, count);
427 break;
428 }
429
430 if (status & SD_STATUS_RO) {
c6563178 431 DBG("RX Overrun [%d + %d]\n", host->id,
ba264b34
PP		 432 host->pio.len, count);
433 break;
434 }
435 else if (status & SD_STATUS_RU) {
c6563178 436 DBG("RX Underrun [%d + %d]\n", host->id,
ba264b34
PP		 437 host->pio.len, count);
438 break;
439 }
440
441 val = au_readl(HOST_RXPORT(host));
442
443 if (sg_ptr)
444 *sg_ptr++ = (unsigned char) (val & 0xFF);
445 }
446
447 host->pio.len -= count;
448 host->pio.offset += count;
449
450 if (sg_len && count == sg_len) {
451 host->pio.index++;
452 host->pio.offset = 0;
453 }
454
455 if (host->pio.len == 0) {
456 //IRQ_OFF(host, SD_CONFIG_RA | SD_CONFIG_RF);
457 IRQ_OFF(host, SD_CONFIG_NE);
458
459 if (host->flags & HOST_F_STOP)
460 SEND_STOP(host);
461
462 tasklet_schedule(&host->data_task);
463 }
464}
465
466/* static void au1xmmc_cmd_complete
467 This is called when a command has been completed - grab the response
468 and check for errors. Then start the data transfer if it is indicated.
469*/
470
471static void au1xmmc_cmd_complete(struct au1xmmc_host *host, u32 status)
472{
473
474 struct mmc_request *mrq = host->mrq;
475 struct mmc_command *cmd;
476 int trans;
477
478 if (!host->mrq)
479 return;
480
481 cmd = mrq->cmd;
482 cmd->error = MMC_ERR_NONE;
483
e9225176
RK		 484 if (cmd->flags & MMC_RSP_PRESENT) {
485 if (cmd->flags & MMC_RSP_136) {
486 u32 r[4];
487 int i;
488
489 r[0] = au_readl(host->iobase + SD_RESP3);
490 r[1] = au_readl(host->iobase + SD_RESP2);
491 r[2] = au_readl(host->iobase + SD_RESP1);
492 r[3] = au_readl(host->iobase + SD_RESP0);
493
494 /* The CRC is omitted from the response, so really
495 * we only got 120 bytes, but the engine expects
496 * 128 bits, so we have to shift things up
497 */
498
499 for(i = 0; i < 4; i++) {
500 cmd->resp[i] = (r[i] & 0x00FFFFFF) << 8;
501 if (i != 3)
502 cmd->resp[i] |= (r[i + 1] & 0xFF000000) >> 24;
503 }
504 } else {
505 /* Techincally, we should be getting all 48 bits of
506 * the response (SD_RESP1 + SD_RESP2), but because
507 * our response omits the CRC, our data ends up
508 * being shifted 8 bits to the right. In this case,
509 * that means that the OSR data starts at bit 31,
510 * so we can just read RESP0 and return that
511 */
512 cmd->resp[0] = au_readl(host->iobase + SD_RESP0);
ba264b34
PP		 513 }
514 }
515
516 /* Figure out errors */
517
518 if (status & (SD_STATUS_SC | SD_STATUS_WC | SD_STATUS_RC))
519 cmd->error = MMC_ERR_BADCRC;
520
521 trans = host->flags & (HOST_F_XMIT | HOST_F_RECV);
522
523 if (!trans || cmd->error != MMC_ERR_NONE) {
524
525 IRQ_OFF(host, SD_CONFIG_TH | SD_CONFIG_RA|SD_CONFIG_RF);
526 tasklet_schedule(&host->finish_task);
527 return;
528 }
529
530 host->status = HOST_S_DATA;
531
532 if (host->flags & HOST_F_DMA) {
533 u32 channel = DMA_CHANNEL(host);
534
535 /* Start the DMA as soon as the buffer gets something in it */
536
537 if (host->flags & HOST_F_RECV) {
538 u32 mask = SD_STATUS_DB | SD_STATUS_NE;
539
540 while((status & mask) != mask)
541 status = au_readl(HOST_STATUS(host));
542 }
543
544 au1xxx_dbdma_start(channel);
545 }
546}
547
548static void au1xmmc_set_clock(struct au1xmmc_host *host, int rate)
549{
550
551 unsigned int pbus = get_au1x00_speed();
552 unsigned int divisor;
553 u32 config;
554
555 /* From databook:
556 divisor = ((((cpuclock / sbus_divisor) / 2) / mmcclock) / 2) - 1
557 */
558
559 pbus /= ((au_readl(SYS_POWERCTRL) & 0x3) + 2);
560 pbus /= 2;
561
562 divisor = ((pbus / rate) / 2) - 1;
563
564 config = au_readl(HOST_CONFIG(host));
565
566 config &= ~(SD_CONFIG_DIV);
567 config |= (divisor & SD_CONFIG_DIV) | SD_CONFIG_DE;
568
569 au_writel(config, HOST_CONFIG(host));
570 au_sync();
571}
572
573static int
574au1xmmc_prepare_data(struct au1xmmc_host *host, struct mmc_data *data)
575{
576
2c171bf1 577 int datalen = data->blocks * data->blksz;
ba264b34
PP		 578
579 if (dma != 0)
580 host->flags |= HOST_F_DMA;
581
582 if (data->flags & MMC_DATA_READ)
583 host->flags |= HOST_F_RECV;
584 else
585 host->flags |= HOST_F_XMIT;
586
587 if (host->mrq->stop)
588 host->flags |= HOST_F_STOP;
589
590 host->dma.dir = DMA_BIDIRECTIONAL;
591
592 host->dma.len = dma_map_sg(mmc_dev(host->mmc), data->sg,
593 data->sg_len, host->dma.dir);
594
595 if (host->dma.len == 0)
596 return MMC_ERR_TIMEOUT;
597
2c171bf1 598 au_writel(data->blksz - 1, HOST_BLKSIZE(host));
ba264b34
PP		 599
600 if (host->flags & HOST_F_DMA) {
601 int i;
602 u32 channel = DMA_CHANNEL(host);
603
604 au1xxx_dbdma_stop(channel);
605
606 for(i = 0; i < host->dma.len; i++) {
607 u32 ret = 0, flags = DDMA_FLAGS_NOIE;
608 struct scatterlist *sg = &data->sg[i];
609 int sg_len = sg->length;
610
611 int len = (datalen > sg_len) ? sg_len : datalen;
612
613 if (i == host->dma.len - 1)
614 flags = DDMA_FLAGS_IE;
615
616 if (host->flags & HOST_F_XMIT){
617 ret = au1xxx_dbdma_put_source_flags(channel,
618 (void *) (page_address(sg->page) +
619 sg->offset),
620 len, flags);
621 }
622 else {
623 ret = au1xxx_dbdma_put_dest_flags(channel,
624 (void *) (page_address(sg->page) +
625 sg->offset),
626 len, flags);
627 }
628
629 if (!ret)
630 goto dataerr;
631
632 datalen -= len;
633 }
634 }
635 else {
636 host->pio.index = 0;
637 host->pio.offset = 0;
638 host->pio.len = datalen;
639
640 if (host->flags & HOST_F_XMIT)
641 IRQ_ON(host, SD_CONFIG_TH);
642 else
643 IRQ_ON(host, SD_CONFIG_NE);
644 //IRQ_ON(host, SD_CONFIG_RA|SD_CONFIG_RF);
645 }
646
647 return MMC_ERR_NONE;
648
649 dataerr:
650 dma_unmap_sg(mmc_dev(host->mmc),data->sg,data->sg_len,host->dma.dir);
651 return MMC_ERR_TIMEOUT;
652}
653
654/* static void au1xmmc_request
655 This actually starts a command or data transaction
656*/
657
658static void au1xmmc_request(struct mmc_host* mmc, struct mmc_request* mrq)
659{
660
661 struct au1xmmc_host *host = mmc_priv(mmc);
662 int ret = MMC_ERR_NONE;
663
664 WARN_ON(irqs_disabled());
665 WARN_ON(host->status != HOST_S_IDLE);
666
667 host->mrq = mrq;
668 host->status = HOST_S_CMD;
669
670 bcsr->disk_leds &= ~(1 << 8);
671
672 if (mrq->data) {
673 FLUSH_FIFO(host);
674 ret = au1xmmc_prepare_data(host, mrq->data);
675 }
676
677 if (ret == MMC_ERR_NONE)
678 ret = au1xmmc_send_command(host, 0, mrq->cmd);
679
680 if (ret != MMC_ERR_NONE) {
681 mrq->cmd->error = ret;
682 au1xmmc_finish_request(host);
683 }
684}
685
686static void au1xmmc_reset_controller(struct au1xmmc_host *host)
687{
688
689 /* Apply the clock */
690 au_writel(SD_ENABLE_CE, HOST_ENABLE(host));
691 au_sync_delay(1);
692
693 au_writel(SD_ENABLE_R | SD_ENABLE_CE, HOST_ENABLE(host));
694 au_sync_delay(5);
695
696 au_writel(~0, HOST_STATUS(host));
697 au_sync();
698
699 au_writel(0, HOST_BLKSIZE(host));
700 au_writel(0x001fffff, HOST_TIMEOUT(host));
701 au_sync();
702
703 au_writel(SD_CONFIG2_EN, HOST_CONFIG2(host));
704 au_sync();
705
706 au_writel(SD_CONFIG2_EN | SD_CONFIG2_FF, HOST_CONFIG2(host));
707 au_sync_delay(1);
708
709 au_writel(SD_CONFIG2_EN, HOST_CONFIG2(host));
710 au_sync();
711
712 /* Configure interrupts */
713 au_writel(AU1XMMC_INTERRUPTS, HOST_CONFIG(host));
714 au_sync();
715}
716
717
718static void au1xmmc_set_ios(struct mmc_host* mmc, struct mmc_ios* ios)
719{
720 struct au1xmmc_host *host = mmc_priv(mmc);
721
ba264b34
PP		 722 if (ios->power_mode == MMC_POWER_OFF)
723 au1xmmc_set_power(host, 0);
724 else if (ios->power_mode == MMC_POWER_ON) {
725 au1xmmc_set_power(host, 1);
726 }
727
728 if (ios->clock && ios->clock != host->clock) {
729 au1xmmc_set_clock(host, ios->clock);
730 host->clock = ios->clock;
731 }
732}
733
734static void au1xmmc_dma_callback(int irq, void *dev_id, struct pt_regs *regs)
735{
736 struct au1xmmc_host *host = (struct au1xmmc_host *) dev_id;
ba264b34
PP		 737
738 /* Avoid spurious interrupts */
739
740 if (!host->mrq)
741 return;
742
743 if (host->flags & HOST_F_STOP)
744 SEND_STOP(host);
745
746 tasklet_schedule(&host->data_task);
747}
748
749#define STATUS_TIMEOUT (SD_STATUS_RAT | SD_STATUS_DT)
750#define STATUS_DATA_IN (SD_STATUS_NE)
751#define STATUS_DATA_OUT (SD_STATUS_TH)
752
753static irqreturn_t au1xmmc_irq(int irq, void *dev_id, struct pt_regs *regs)
754{
755
756 u32 status;
757 int i, ret = 0;
758
759 disable_irq(AU1100_SD_IRQ);
760
761 for(i = 0; i < AU1XMMC_CONTROLLER_COUNT; i++) {
762 struct au1xmmc_host * host = au1xmmc_hosts[i];
763 u32 handled = 1;
764
765 status = au_readl(HOST_STATUS(host));
766
767 if (host->mrq && (status & STATUS_TIMEOUT)) {
768 if (status & SD_STATUS_RAT)
769 host->mrq->cmd->error = MMC_ERR_TIMEOUT;
770
771 else if (status & SD_STATUS_DT)
772 host->mrq->data->error = MMC_ERR_TIMEOUT;
773
774 /* In PIO mode, interrupts might still be enabled */
775 IRQ_OFF(host, SD_CONFIG_NE | SD_CONFIG_TH);
776
777 //IRQ_OFF(host, SD_CONFIG_TH|SD_CONFIG_RA|SD_CONFIG_RF);
778 tasklet_schedule(&host->finish_task);
779 }
780#if 0
781 else if (status & SD_STATUS_DD) {
782
783 /* Sometimes we get a DD before a NE in PIO mode */
784
785 if (!(host->flags & HOST_F_DMA) &&
786 (status & SD_STATUS_NE))
787 au1xmmc_receive_pio(host);
788 else {
789 au1xmmc_data_complete(host, status);
790 //tasklet_schedule(&host->data_task);
791 }
792 }
793#endif
794 else if (status & (SD_STATUS_CR)) {
795 if (host->status == HOST_S_CMD)
796 au1xmmc_cmd_complete(host,status);
797 }
798 else if (!(host->flags & HOST_F_DMA)) {
799 if ((host->flags & HOST_F_XMIT) &&
800 (status & STATUS_DATA_OUT))
801 au1xmmc_send_pio(host);
802 else if ((host->flags & HOST_F_RECV) &&
803 (status & STATUS_DATA_IN))
804 au1xmmc_receive_pio(host);
805 }
806 else if (status & 0x203FBC70) {
c6563178 807 DBG("Unhandled status %8.8x\n", host->id, status);
ba264b34
PP		 808 handled = 0;
809 }
810
811 au_writel(status, HOST_STATUS(host));
812 au_sync();
813
814 ret |= handled;
815 }
816
817 enable_irq(AU1100_SD_IRQ);
818 return ret;
819}
820
821static void au1xmmc_poll_event(unsigned long arg)
822{
823 struct au1xmmc_host *host = (struct au1xmmc_host *) arg;
824
825 int card = au1xmmc_card_inserted(host);
826 int controller = (host->flags & HOST_F_ACTIVE) ? 1 : 0;
827
828 if (card != controller) {
829 host->flags &= ~HOST_F_ACTIVE;
830 if (card) host->flags |= HOST_F_ACTIVE;
831 mmc_detect_change(host->mmc, 0);
832 }
833
834 if (host->mrq != NULL) {
835 u32 status = au_readl(HOST_STATUS(host));
c6563178 836 DBG("PENDING - %8.8x\n", host->id, status);
ba264b34
PP		 837 }
838
839 mod_timer(&host->timer, jiffies + AU1XMMC_DETECT_TIMEOUT);
840}
841
842static dbdev_tab_t au1xmmc_mem_dbdev =
843{
844 DSCR_CMD0_ALWAYS, DEV_FLAGS_ANYUSE, 0, 8, 0x00000000, 0, 0
845};
846
847static void au1xmmc_init_dma(struct au1xmmc_host *host)
848{
849
850 u32 rxchan, txchan;
851
852 int txid = au1xmmc_card_table[host->id].tx_devid;
853 int rxid = au1xmmc_card_table[host->id].rx_devid;
854
855 /* DSCR_CMD0_ALWAYS has a stride of 32 bits, we need a stride
856 of 8 bits. And since devices are shared, we need to create
857 our own to avoid freaking out other devices
858 */
859
860 int memid = au1xxx_ddma_add_device(&au1xmmc_mem_dbdev);
861
862 txchan = au1xxx_dbdma_chan_alloc(memid, txid,
863 au1xmmc_dma_callback, (void *) host);
864
865 rxchan = au1xxx_dbdma_chan_alloc(rxid, memid,
866 au1xmmc_dma_callback, (void *) host);
867
868 au1xxx_dbdma_set_devwidth(txchan, 8);
869 au1xxx_dbdma_set_devwidth(rxchan, 8);
870
871 au1xxx_dbdma_ring_alloc(txchan, AU1XMMC_DESCRIPTOR_COUNT);
872 au1xxx_dbdma_ring_alloc(rxchan, AU1XMMC_DESCRIPTOR_COUNT);
873
874 host->tx_chan = txchan;
875 host->rx_chan = rxchan;
876}
877
878struct mmc_host_ops au1xmmc_ops = {
879 .request = au1xmmc_request,
880 .set_ios = au1xmmc_set_ios,
881};
882
b256f9df 883static int __devinit au1xmmc_probe(struct platform_device *pdev)
ba264b34
PP		 884{
885
886 int i, ret = 0;
887
888 /* THe interrupt is shared among all controllers */
dace1453 889 ret = request_irq(AU1100_SD_IRQ, au1xmmc_irq, IRQF_DISABLED, "MMC", 0);
ba264b34
PP		 890
891 if (ret) {
892 printk(DRIVER_NAME "ERROR: Couldn't get int %d: %d\n",
893 AU1100_SD_IRQ, ret);
894 return -ENXIO;
895 }
896
897 disable_irq(AU1100_SD_IRQ);
898
899 for(i = 0; i < AU1XMMC_CONTROLLER_COUNT; i++) {
b256f9df 900 struct mmc_host *mmc = mmc_alloc_host(sizeof(struct au1xmmc_host), &pdev->dev);
ba264b34
PP		 901 struct au1xmmc_host *host = 0;
902
903 if (!mmc) {
904 printk(DRIVER_NAME "ERROR: no mem for host %d\n", i);
905 au1xmmc_hosts[i] = 0;
906 continue;
907 }
908
909 mmc->ops = &au1xmmc_ops;
910
911 mmc->f_min = 450000;
912 mmc->f_max = 24000000;
913
914 mmc->max_seg_size = AU1XMMC_DESCRIPTOR_SIZE;
915 mmc->max_phys_segs = AU1XMMC_DESCRIPTOR_COUNT;
916
917 mmc->ocr_avail = AU1XMMC_OCR;
918
919 host = mmc_priv(mmc);
920 host->mmc = mmc;
921
922 host->id = i;
923 host->iobase = au1xmmc_card_table[host->id].iobase;
924 host->clock = 0;
925 host->power_mode = MMC_POWER_OFF;
926
927 host->flags = au1xmmc_card_inserted(host) ? HOST_F_ACTIVE : 0;
928 host->status = HOST_S_IDLE;
929
930 init_timer(&host->timer);
931
932 host->timer.function = au1xmmc_poll_event;
933 host->timer.data = (unsigned long) host;
934 host->timer.expires = jiffies + AU1XMMC_DETECT_TIMEOUT;
935
936 tasklet_init(&host->data_task, au1xmmc_tasklet_data,
937 (unsigned long) host);
938
939 tasklet_init(&host->finish_task, au1xmmc_tasklet_finish,
940 (unsigned long) host);
941
942 spin_lock_init(&host->lock);
943
944 if (dma != 0)
945 au1xmmc_init_dma(host);
946
947 au1xmmc_reset_controller(host);
948
949 mmc_add_host(mmc);
950 au1xmmc_hosts[i] = host;
951
952 add_timer(&host->timer);
953
954 printk(KERN_INFO DRIVER_NAME ": MMC Controller %d set up at %8.8X (mode=%s)\n",
955 host->id, host->iobase, dma ? "dma" : "pio");
956 }
957
958 enable_irq(AU1100_SD_IRQ);
959
960 return 0;
961}
962
b256f9df 963static int __devexit au1xmmc_remove(struct platform_device *pdev)
ba264b34
PP		 964{
965
966 int i;
967
968 disable_irq(AU1100_SD_IRQ);
969
970 for(i = 0; i < AU1XMMC_CONTROLLER_COUNT; i++) {
971 struct au1xmmc_host *host = au1xmmc_hosts[i];
972 if (!host) continue;
973
974 tasklet_kill(&host->data_task);
975 tasklet_kill(&host->finish_task);
976
977 del_timer_sync(&host->timer);
978 au1xmmc_set_power(host, 0);
979
980 mmc_remove_host(host->mmc);
981
982 au1xxx_dbdma_chan_free(host->tx_chan);
983 au1xxx_dbdma_chan_free(host->rx_chan);
984
985 au_writel(0x0, HOST_ENABLE(host));
986 au_sync();
987 }
988
989 free_irq(AU1100_SD_IRQ, 0);
990 return 0;
991}
992
b256f9df 993static struct platform_driver au1xmmc_driver = {
ba264b34
PP		 994 .probe = au1xmmc_probe,
995 .remove = au1xmmc_remove,
996 .suspend = NULL,
b256f9df
MM		 997 .resume = NULL,
998 .driver = {
999 .name = DRIVER_NAME,
1000 },
ba264b34
PP		 1001};
1002
1003static int __init au1xmmc_init(void)
1004{
b256f9df 1005 return platform_driver_register(&au1xmmc_driver);
ba264b34
PP		 1006}
1007
1008static void __exit au1xmmc_exit(void)
1009{
b256f9df 1010 platform_driver_unregister(&au1xmmc_driver);
ba264b34
PP		 1011}
1012
1013module_init(au1xmmc_init);
1014module_exit(au1xmmc_exit);
1015
1016#ifdef MODULE
1017MODULE_AUTHOR("Advanced Micro Devices, Inc");
1018MODULE_DESCRIPTION("MMC/SD driver for the Alchemy Au1XXX");
1019MODULE_LICENSE("GPL");
1020#endif
1021
Linux kernel - Deliverables
This page took 0.14088 seconds and 5 git commands to generate.