projects / deliverable / linux.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
mmc: sdhci: Use mmc core regulator infrastucture
[deliverable/linux.git] / drivers / mmc / host / sdhci.c
CommitLineData
d129bceb 1/*
70f10482 2 * linux/drivers/mmc/host/sdhci.c - Secure Digital Host Controller Interface driver
d129bceb 3 *
b69c9058 4 * Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved.
d129bceb
PO		 5 *
6 * This program is free software; you can redistribute it and/or modify
643f720c
PO		 7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or (at
9 * your option) any later version.
84c46a53
PO		 10 *
11 * Thanks to the following companies for their support:
12 *
13 * - JMicron (hardware and technical support)
d129bceb
PO		 14 */
15
d129bceb
PO		 16#include <linux/delay.h>
17#include <linux/highmem.h>
b8c86fc5 18#include <linux/io.h>
88b47679 19#include <linux/module.h>
d129bceb 20#include <linux/dma-mapping.h>
5a0e3ad6 21#include <linux/slab.h>
11763609 22#include <linux/scatterlist.h>
9bea3c85 23#include <linux/regulator/consumer.h>
66fd8ad5 24#include <linux/pm_runtime.h>
d129bceb 25
2f730fec
PO		 26#include <linux/leds.h>
27
22113efd 28#include <linux/mmc/mmc.h>
d129bceb 29#include <linux/mmc/host.h>
473b095a 30#include <linux/mmc/card.h>
bec9d4e5 31#include <linux/mmc/slot-gpio.h>
d129bceb 32
d129bceb
PO		 33#include "sdhci.h"
34
35#define DRIVER_NAME "sdhci"
d129bceb 36
d129bceb 37#define DBG(f, x...) \
c6563178 38 pr_debug(DRIVER_NAME " [%s()]: " f, __func__,## x)
d129bceb 39
f9134319
PO		 40#if defined(CONFIG_LEDS_CLASS) || (defined(CONFIG_LEDS_CLASS_MODULE) && \
41 defined(CONFIG_MMC_SDHCI_MODULE))
42#define SDHCI_USE_LEDS_CLASS
43#endif
44
b513ea25
AN		 45#define MAX_TUNING_LOOP 40
46
d1e49f77
RK		 47#define ADMA_SIZE ((128 * 2 + 1) * 4)
48
df673b22 49static unsigned int debug_quirks = 0;
66fd8ad5 50static unsigned int debug_quirks2;
67435274 51
d129bceb
PO		 52static void sdhci_finish_data(struct sdhci_host *);
53
d129bceb 54static void sdhci_finish_command(struct sdhci_host *);
069c9f14 55static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode);
cf2b5eea 56static void sdhci_tuning_timer(unsigned long data);
52983382 57static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable);
d129bceb 58
66fd8ad5
AH		 59#ifdef CONFIG_PM_RUNTIME
60static int sdhci_runtime_pm_get(struct sdhci_host *host);
61static int sdhci_runtime_pm_put(struct sdhci_host *host);
f0710a55
AH		 62static void sdhci_runtime_pm_bus_on(struct sdhci_host *host);
63static void sdhci_runtime_pm_bus_off(struct sdhci_host *host);
66fd8ad5
AH		 64#else
65static inline int sdhci_runtime_pm_get(struct sdhci_host *host)
66{
67 return 0;
68}
69static inline int sdhci_runtime_pm_put(struct sdhci_host *host)
70{
71 return 0;
72}
f0710a55
AH		 73static void sdhci_runtime_pm_bus_on(struct sdhci_host *host)
74{
75}
76static void sdhci_runtime_pm_bus_off(struct sdhci_host *host)
77{
78}
66fd8ad5
AH		 79#endif
80
d129bceb
PO		 81static void sdhci_dumpregs(struct sdhci_host *host)
82{
a3c76eb9 83 pr_debug(DRIVER_NAME ": =========== REGISTER DUMP (%s)===========\n",
412ab659 84 mmc_hostname(host->mmc));
d129bceb 85
a3c76eb9 86 pr_debug(DRIVER_NAME ": Sys addr: 0x%08x | Version: 0x%08x\n",
4e4141a5
AV		 87 sdhci_readl(host, SDHCI_DMA_ADDRESS),
88 sdhci_readw(host, SDHCI_HOST_VERSION));
a3c76eb9 89 pr_debug(DRIVER_NAME ": Blk size: 0x%08x | Blk cnt: 0x%08x\n",
4e4141a5
AV		 90 sdhci_readw(host, SDHCI_BLOCK_SIZE),
91 sdhci_readw(host, SDHCI_BLOCK_COUNT));
a3c76eb9 92 pr_debug(DRIVER_NAME ": Argument: 0x%08x | Trn mode: 0x%08x\n",
4e4141a5
AV		 93 sdhci_readl(host, SDHCI_ARGUMENT),
94 sdhci_readw(host, SDHCI_TRANSFER_MODE));
a3c76eb9 95 pr_debug(DRIVER_NAME ": Present: 0x%08x | Host ctl: 0x%08x\n",
4e4141a5
AV		 96 sdhci_readl(host, SDHCI_PRESENT_STATE),
97 sdhci_readb(host, SDHCI_HOST_CONTROL));
a3c76eb9 98 pr_debug(DRIVER_NAME ": Power: 0x%08x | Blk gap: 0x%08x\n",
4e4141a5
AV		 99 sdhci_readb(host, SDHCI_POWER_CONTROL),
100 sdhci_readb(host, SDHCI_BLOCK_GAP_CONTROL));
a3c76eb9 101 pr_debug(DRIVER_NAME ": Wake-up: 0x%08x | Clock: 0x%08x\n",
4e4141a5
AV		 102 sdhci_readb(host, SDHCI_WAKE_UP_CONTROL),
103 sdhci_readw(host, SDHCI_CLOCK_CONTROL));
a3c76eb9 104 pr_debug(DRIVER_NAME ": Timeout: 0x%08x | Int stat: 0x%08x\n",
4e4141a5
AV		 105 sdhci_readb(host, SDHCI_TIMEOUT_CONTROL),
106 sdhci_readl(host, SDHCI_INT_STATUS));
a3c76eb9 107 pr_debug(DRIVER_NAME ": Int enab: 0x%08x | Sig enab: 0x%08x\n",
4e4141a5
AV		 108 sdhci_readl(host, SDHCI_INT_ENABLE),
109 sdhci_readl(host, SDHCI_SIGNAL_ENABLE));
a3c76eb9 110 pr_debug(DRIVER_NAME ": AC12 err: 0x%08x | Slot int: 0x%08x\n",
4e4141a5
AV		 111 sdhci_readw(host, SDHCI_ACMD12_ERR),
112 sdhci_readw(host, SDHCI_SLOT_INT_STATUS));
a3c76eb9 113 pr_debug(DRIVER_NAME ": Caps: 0x%08x | Caps_1: 0x%08x\n",
4e4141a5 114 sdhci_readl(host, SDHCI_CAPABILITIES),
e8120ad1 115 sdhci_readl(host, SDHCI_CAPABILITIES_1));
a3c76eb9 116 pr_debug(DRIVER_NAME ": Cmd: 0x%08x | Max curr: 0x%08x\n",
e8120ad1 117 sdhci_readw(host, SDHCI_COMMAND),
4e4141a5 118 sdhci_readl(host, SDHCI_MAX_CURRENT));
a3c76eb9 119 pr_debug(DRIVER_NAME ": Host ctl2: 0x%08x\n",
f2119df6 120 sdhci_readw(host, SDHCI_HOST_CONTROL2));
d129bceb 121
be3f4ae0 122 if (host->flags & SDHCI_USE_ADMA)
a3c76eb9 123 pr_debug(DRIVER_NAME ": ADMA Err: 0x%08x | ADMA Ptr: 0x%08x\n",
be3f4ae0
BD		 124 readl(host->ioaddr + SDHCI_ADMA_ERROR),
125 readl(host->ioaddr + SDHCI_ADMA_ADDRESS));
126
a3c76eb9 127 pr_debug(DRIVER_NAME ": ===========================================\n");
d129bceb
PO		 128}
129
130/*****************************************************************************\
131 * *
132 * Low level functions *
133 * *
134\*****************************************************************************/
135
7260cf5e
AV		 136static void sdhci_set_card_detection(struct sdhci_host *host, bool enable)
137{
5b4f1f6c 138 u32 present;
7260cf5e 139
c79396c1 140 if ((host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION) ||
87b87a3f 141 (host->mmc->caps & MMC_CAP_NONREMOVABLE))
66fd8ad5
AH		 142 return;
143
5b4f1f6c
RK		 144 if (enable) {
145 present = sdhci_readl(host, SDHCI_PRESENT_STATE) &
146 SDHCI_CARD_PRESENT;
d25928d1 147
5b4f1f6c
RK		 148 host->ier |= present ? SDHCI_INT_CARD_REMOVE :
149 SDHCI_INT_CARD_INSERT;
150 } else {
151 host->ier &= ~(SDHCI_INT_CARD_REMOVE | SDHCI_INT_CARD_INSERT);
152 }
b537f94c
RK		 153
154 sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
155 sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
7260cf5e
AV		 156}
157
158static void sdhci_enable_card_detection(struct sdhci_host *host)
159{
160 sdhci_set_card_detection(host, true);
161}
162
163static void sdhci_disable_card_detection(struct sdhci_host *host)
164{
165 sdhci_set_card_detection(host, false);
166}
167
03231f9b 168void sdhci_reset(struct sdhci_host *host, u8 mask)
d129bceb 169{
e16514d8 170 unsigned long timeout;
393c1a34 171
4e4141a5 172 sdhci_writeb(host, mask, SDHCI_SOFTWARE_RESET);
d129bceb 173
f0710a55 174 if (mask & SDHCI_RESET_ALL) {
d129bceb 175 host->clock = 0;
f0710a55
AH		 176 /* Reset-all turns off SD Bus Power */
177 if (host->quirks2 & SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON)
178 sdhci_runtime_pm_bus_off(host);
179 }
d129bceb 180
e16514d8
PO		 181 /* Wait max 100 ms */
182 timeout = 100;
183
184 /* hw clears the bit when it's done */
4e4141a5 185 while (sdhci_readb(host, SDHCI_SOFTWARE_RESET) & mask) {
e16514d8 186 if (timeout == 0) {
a3c76eb9 187 pr_err("%s: Reset 0x%x never completed.\n",
e16514d8
PO		 188 mmc_hostname(host->mmc), (int)mask);
189 sdhci_dumpregs(host);
190 return;
191 }
192 timeout--;
193 mdelay(1);
d129bceb 194 }
03231f9b
RK		 195}
196EXPORT_SYMBOL_GPL(sdhci_reset);
197
198static void sdhci_do_reset(struct sdhci_host *host, u8 mask)
199{
200 if (host->quirks & SDHCI_QUIRK_NO_CARD_NO_RESET) {
201 if (!(sdhci_readl(host, SDHCI_PRESENT_STATE) &
202 SDHCI_CARD_PRESENT))
203 return;
204 }
063a9dbb 205
03231f9b 206 host->ops->reset(host, mask);
393c1a34 207
da91a8f9
RK		 208 if (mask & SDHCI_RESET_ALL) {
209 if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
210 if (host->ops->enable_dma)
211 host->ops->enable_dma(host);
212 }
213
214 /* Resetting the controller clears many */
215 host->preset_enabled = false;
3abc1e80 216 }
d129bceb
PO		 217}
218
2f4cbb3d
NP		 219static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios);
220
221static void sdhci_init(struct sdhci_host *host, int soft)
d129bceb 222{
2f4cbb3d 223 if (soft)
03231f9b 224 sdhci_do_reset(host, SDHCI_RESET_CMD|SDHCI_RESET_DATA);
2f4cbb3d 225 else
03231f9b 226 sdhci_do_reset(host, SDHCI_RESET_ALL);
d129bceb 227
b537f94c
RK		 228 host->ier = SDHCI_INT_BUS_POWER | SDHCI_INT_DATA_END_BIT |
229 SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_TIMEOUT |
230 SDHCI_INT_INDEX | SDHCI_INT_END_BIT | SDHCI_INT_CRC |
231 SDHCI_INT_TIMEOUT | SDHCI_INT_DATA_END |
232 SDHCI_INT_RESPONSE;
233
234 sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
235 sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
2f4cbb3d
NP		 236
237 if (soft) {
238 /* force clock reconfiguration */
239 host->clock = 0;
240 sdhci_set_ios(host->mmc, &host->mmc->ios);
241 }
7260cf5e 242}
d129bceb 243
7260cf5e
AV		 244static void sdhci_reinit(struct sdhci_host *host)
245{
2f4cbb3d 246 sdhci_init(host, 0);
b67c6b41
AL		 247 /*
248 * Retuning stuffs are affected by different cards inserted and only
249 * applicable to UHS-I cards. So reset these fields to their initial
250 * value when card is removed.
251 */
973905fe
AL		 252 if (host->flags & SDHCI_USING_RETUNING_TIMER) {
253 host->flags &= ~SDHCI_USING_RETUNING_TIMER;
254
b67c6b41
AL		 255 del_timer_sync(&host->tuning_timer);
256 host->flags &= ~SDHCI_NEEDS_RETUNING;
257 host->mmc->max_blk_count =
258 (host->quirks & SDHCI_QUIRK_NO_MULTIBLOCK) ? 1 : 65535;
259 }
7260cf5e 260 sdhci_enable_card_detection(host);
d129bceb
PO		 261}
262
263static void sdhci_activate_led(struct sdhci_host *host)
264{
265 u8 ctrl;
266
4e4141a5 267 ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
d129bceb 268 ctrl |= SDHCI_CTRL_LED;
4e4141a5 269 sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
d129bceb
PO		 270}
271
272static void sdhci_deactivate_led(struct sdhci_host *host)
273{
274 u8 ctrl;
275
4e4141a5 276 ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
d129bceb 277 ctrl &= ~SDHCI_CTRL_LED;
4e4141a5 278 sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
d129bceb
PO		 279}
280
f9134319 281#ifdef SDHCI_USE_LEDS_CLASS
2f730fec
PO		 282static void sdhci_led_control(struct led_classdev *led,
283 enum led_brightness brightness)
284{
285 struct sdhci_host *host = container_of(led, struct sdhci_host, led);
286 unsigned long flags;
287
288 spin_lock_irqsave(&host->lock, flags);
289
66fd8ad5
AH		 290 if (host->runtime_suspended)
291 goto out;
292
2f730fec
PO		 293 if (brightness == LED_OFF)
294 sdhci_deactivate_led(host);
295 else
296 sdhci_activate_led(host);
66fd8ad5 297out:
2f730fec
PO		 298 spin_unlock_irqrestore(&host->lock, flags);
299}
300#endif
301
d129bceb
PO		 302/*****************************************************************************\
303 * *
304 * Core functions *
305 * *
306\*****************************************************************************/
307
a406f5a3 308static void sdhci_read_block_pio(struct sdhci_host *host)
d129bceb 309{
7659150c
PO		 310 unsigned long flags;
311 size_t blksize, len, chunk;
7244b85b 312 u32 uninitialized_var(scratch);
7659150c 313 u8 *buf;
d129bceb 314
a406f5a3 315 DBG("PIO reading\n");
d129bceb 316
a406f5a3 317 blksize = host->data->blksz;
7659150c 318 chunk = 0;
d129bceb 319
7659150c 320 local_irq_save(flags);
d129bceb 321
a406f5a3 322 while (blksize) {
7659150c
PO		 323 if (!sg_miter_next(&host->sg_miter))
324 BUG();
d129bceb 325
7659150c 326 len = min(host->sg_miter.length, blksize);
d129bceb 327
7659150c
PO		 328 blksize -= len;
329 host->sg_miter.consumed = len;
14d836e7 330
7659150c 331 buf = host->sg_miter.addr;
d129bceb 332
7659150c
PO		 333 while (len) {
334 if (chunk == 0) {
4e4141a5 335 scratch = sdhci_readl(host, SDHCI_BUFFER);
7659150c 336 chunk = 4;
a406f5a3 337 }
7659150c
PO		 338
339 *buf = scratch & 0xFF;
340
341 buf++;
342 scratch >>= 8;
343 chunk--;
344 len--;
d129bceb 345 }
a406f5a3 346 }
7659150c
PO		 347
348 sg_miter_stop(&host->sg_miter);
349
350 local_irq_restore(flags);
a406f5a3 351}
d129bceb 352
a406f5a3
PO		 353static void sdhci_write_block_pio(struct sdhci_host *host)
354{
7659150c
PO		 355 unsigned long flags;
356 size_t blksize, len, chunk;
357 u32 scratch;
358 u8 *buf;
d129bceb 359
a406f5a3
PO		 360 DBG("PIO writing\n");
361
362 blksize = host->data->blksz;
7659150c
PO		 363 chunk = 0;
364 scratch = 0;
d129bceb 365
7659150c 366 local_irq_save(flags);
d129bceb 367
a406f5a3 368 while (blksize) {
7659150c
PO		 369 if (!sg_miter_next(&host->sg_miter))
370 BUG();
a406f5a3 371
7659150c
PO		 372 len = min(host->sg_miter.length, blksize);
373
374 blksize -= len;
375 host->sg_miter.consumed = len;
376
377 buf = host->sg_miter.addr;
d129bceb 378
7659150c
PO		 379 while (len) {
380 scratch |= (u32)*buf << (chunk * 8);
381
382 buf++;
383 chunk++;
384 len--;
385
386 if ((chunk == 4) || ((len == 0) && (blksize == 0))) {
4e4141a5 387 sdhci_writel(host, scratch, SDHCI_BUFFER);
7659150c
PO		 388 chunk = 0;
389 scratch = 0;
d129bceb 390 }
d129bceb
PO		 391 }
392 }
7659150c
PO		 393
394 sg_miter_stop(&host->sg_miter);
395
396 local_irq_restore(flags);
a406f5a3
PO		 397}
398
399static void sdhci_transfer_pio(struct sdhci_host *host)
400{
401 u32 mask;
402
403 BUG_ON(!host->data);
404
7659150c 405 if (host->blocks == 0)
a406f5a3
PO		 406 return;
407
408 if (host->data->flags & MMC_DATA_READ)
409 mask = SDHCI_DATA_AVAILABLE;
410 else
411 mask = SDHCI_SPACE_AVAILABLE;
412
4a3cba32
PO		 413 /*
414 * Some controllers (JMicron JMB38x) mess up the buffer bits
415 * for transfers < 4 bytes. As long as it is just one block,
416 * we can ignore the bits.
417 */
418 if ((host->quirks & SDHCI_QUIRK_BROKEN_SMALL_PIO) &&
419 (host->data->blocks == 1))
420 mask = ~0;
421
4e4141a5 422 while (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask) {
3e3bf207
AV		 423 if (host->quirks & SDHCI_QUIRK_PIO_NEEDS_DELAY)
424 udelay(100);
425
a406f5a3
PO		 426 if (host->data->flags & MMC_DATA_READ)
427 sdhci_read_block_pio(host);
428 else
429 sdhci_write_block_pio(host);
d129bceb 430
7659150c
PO		 431 host->blocks--;
432 if (host->blocks == 0)
a406f5a3 433 break;
a406f5a3 434 }
d129bceb 435
a406f5a3 436 DBG("PIO transfer complete.\n");
d129bceb
PO		 437}
438
2134a922
PO		 439static char *sdhci_kmap_atomic(struct scatterlist *sg, unsigned long *flags)
440{
441 local_irq_save(*flags);
482fce99 442 return kmap_atomic(sg_page(sg)) + sg->offset;
2134a922
PO		 443}
444
445static void sdhci_kunmap_atomic(void *buffer, unsigned long *flags)
446{
482fce99 447 kunmap_atomic(buffer);
2134a922
PO		 448 local_irq_restore(*flags);
449}
450
118cd17d
BD		 451static void sdhci_set_adma_desc(u8 *desc, u32 addr, int len, unsigned cmd)
452{
9e506f35
BD		 453 __le32 *dataddr = (__le32 __force *)(desc + 4);
454 __le16 *cmdlen = (__le16 __force *)desc;
118cd17d 455
9e506f35
BD		 456 /* SDHCI specification says ADMA descriptors should be 4 byte
457 * aligned, so using 16 or 32bit operations should be safe. */
118cd17d 458
9e506f35
BD		 459 cmdlen[0] = cpu_to_le16(cmd);
460 cmdlen[1] = cpu_to_le16(len);
461
462 dataddr[0] = cpu_to_le32(addr);
118cd17d
BD		 463}
464
8f1934ce 465static int sdhci_adma_table_pre(struct sdhci_host *host,
2134a922
PO		 466 struct mmc_data *data)
467{
468 int direction;
469
470 u8 *desc;
471 u8 *align;
472 dma_addr_t addr;
473 dma_addr_t align_addr;
474 int len, offset;
475
476 struct scatterlist *sg;
477 int i;
478 char *buffer;
479 unsigned long flags;
480
481 /*
482 * The spec does not specify endianness of descriptor table.
483 * We currently guess that it is LE.
484 */
485
486 if (data->flags & MMC_DATA_READ)
487 direction = DMA_FROM_DEVICE;
488 else
489 direction = DMA_TO_DEVICE;
490
2134a922
PO		 491 host->align_addr = dma_map_single(mmc_dev(host->mmc),
492 host->align_buffer, 128 * 4, direction);
8d8bb39b 493 if (dma_mapping_error(mmc_dev(host->mmc), host->align_addr))
8f1934ce 494 goto fail;
2134a922
PO		 495 BUG_ON(host->align_addr & 0x3);
496
497 host->sg_count = dma_map_sg(mmc_dev(host->mmc),
498 data->sg, data->sg_len, direction);
8f1934ce
PO		 499 if (host->sg_count == 0)
500 goto unmap_align;
2134a922
PO		 501
502 desc = host->adma_desc;
503 align = host->align_buffer;
504
505 align_addr = host->align_addr;
506
507 for_each_sg(data->sg, sg, host->sg_count, i) {
508 addr = sg_dma_address(sg);
509 len = sg_dma_len(sg);
510
511 /*
512 * The SDHCI specification states that ADMA
513 * addresses must be 32-bit aligned. If they
514 * aren't, then we use a bounce buffer for
515 * the (up to three) bytes that screw up the
516 * alignment.
517 */
518 offset = (4 - (addr & 0x3)) & 0x3;
519 if (offset) {
520 if (data->flags & MMC_DATA_WRITE) {
521 buffer = sdhci_kmap_atomic(sg, &flags);
6cefd05f 522 WARN_ON(((long)buffer & PAGE_MASK) > (PAGE_SIZE - 3));
2134a922
PO		 523 memcpy(align, buffer, offset);
524 sdhci_kunmap_atomic(buffer, &flags);
525 }
526
118cd17d
BD		 527 /* tran, valid */
528 sdhci_set_adma_desc(desc, align_addr, offset, 0x21);
2134a922
PO		 529
530 BUG_ON(offset > 65536);
531
2134a922
PO		 532 align += 4;
533 align_addr += 4;
534
535 desc += 8;
536
537 addr += offset;
538 len -= offset;
539 }
540
2134a922
PO		 541 BUG_ON(len > 65536);
542
118cd17d
BD		 543 /* tran, valid */
544 sdhci_set_adma_desc(desc, addr, len, 0x21);
2134a922
PO		 545 desc += 8;
546
547 /*
548 * If this triggers then we have a calculation bug
549 * somewhere. :/
550 */
d1e49f77 551 WARN_ON((desc - host->adma_desc) > ADMA_SIZE);
2134a922
PO		 552 }
553
70764a90
TA		 554 if (host->quirks & SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC) {
555 /*
556 * Mark the last descriptor as the terminating descriptor
557 */
558 if (desc != host->adma_desc) {
559 desc -= 8;
560 desc[0] |= 0x2; /* end */
561 }
562 } else {
563 /*
564 * Add a terminating entry.
565 */
2134a922 566
70764a90
TA		 567 /* nop, end, valid */
568 sdhci_set_adma_desc(desc, 0, 0, 0x3);
569 }
2134a922
PO		 570
571 /*
572 * Resync align buffer as we might have changed it.
573 */
574 if (data->flags & MMC_DATA_WRITE) {
575 dma_sync_single_for_device(mmc_dev(host->mmc),
576 host->align_addr, 128 * 4, direction);
577 }
578
8f1934ce
PO		 579 return 0;
580
8f1934ce
PO		 581unmap_align:
582 dma_unmap_single(mmc_dev(host->mmc), host->align_addr,
583 128 * 4, direction);
584fail:
585 return -EINVAL;
2134a922
PO		 586}
587
588static void sdhci_adma_table_post(struct sdhci_host *host,
589 struct mmc_data *data)
590{
591 int direction;
592
593 struct scatterlist *sg;
594 int i, size;
595 u8 *align;
596 char *buffer;
597 unsigned long flags;
de0b65a7 598 bool has_unaligned;
2134a922
PO		 599
600 if (data->flags & MMC_DATA_READ)
601 direction = DMA_FROM_DEVICE;
602 else
603 direction = DMA_TO_DEVICE;
604
2134a922
PO		 605 dma_unmap_single(mmc_dev(host->mmc), host->align_addr,
606 128 * 4, direction);
607
de0b65a7
RK		 608 /* Do a quick scan of the SG list for any unaligned mappings */
609 has_unaligned = false;
610 for_each_sg(data->sg, sg, host->sg_count, i)
611 if (sg_dma_address(sg) & 3) {
612 has_unaligned = true;
613 break;
614 }
615
616 if (has_unaligned && data->flags & MMC_DATA_READ) {
2134a922
PO		 617 dma_sync_sg_for_cpu(mmc_dev(host->mmc), data->sg,
618 data->sg_len, direction);
619
620 align = host->align_buffer;
621
622 for_each_sg(data->sg, sg, host->sg_count, i) {
623 if (sg_dma_address(sg) & 0x3) {
624 size = 4 - (sg_dma_address(sg) & 0x3);
625
626 buffer = sdhci_kmap_atomic(sg, &flags);
6cefd05f 627 WARN_ON(((long)buffer & PAGE_MASK) > (PAGE_SIZE - 3));
2134a922
PO		 628 memcpy(buffer, align, size);
629 sdhci_kunmap_atomic(buffer, &flags);
630
631 align += 4;
632 }
633 }
634 }
635
636 dma_unmap_sg(mmc_dev(host->mmc), data->sg,
637 data->sg_len, direction);
638}
639
a3c7778f 640static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_command *cmd)
d129bceb 641{
1c8cde92 642 u8 count;
a3c7778f 643 struct mmc_data *data = cmd->data;
1c8cde92 644 unsigned target_timeout, current_timeout;
d129bceb 645
ee53ab5d
PO		 646 /*
647 * If the host controller provides us with an incorrect timeout
648 * value, just skip the check and use 0xE. The hardware may take
649 * longer to time out, but that's much better than having a too-short
650 * timeout value.
651 */
11a2f1b7 652 if (host->quirks & SDHCI_QUIRK_BROKEN_TIMEOUT_VAL)
ee53ab5d 653 return 0xE;
e538fbe8 654
a3c7778f 655 /* Unspecified timeout, assume max */
1d4d7744 656 if (!data && !cmd->busy_timeout)
a3c7778f 657 return 0xE;
d129bceb 658
a3c7778f
AW		 659 /* timeout in us */
660 if (!data)
1d4d7744 661 target_timeout = cmd->busy_timeout * 1000;
78a2ca27
AS		 662 else {
663 target_timeout = data->timeout_ns / 1000;
664 if (host->clock)
665 target_timeout += data->timeout_clks / host->clock;
666 }
81b39802 667
1c8cde92
PO		 668 /*
669 * Figure out needed cycles.
670 * We do this in steps in order to fit inside a 32 bit int.
671 * The first step is the minimum timeout, which will have a
672 * minimum resolution of 6 bits:
673 * (1) 2^13*1000 > 2^22,
674 * (2) host->timeout_clk < 2^16
675 * =>
676 * (1) / (2) > 2^6
677 */
678 count = 0;
679 current_timeout = (1 << 13) * 1000 / host->timeout_clk;
680 while (current_timeout < target_timeout) {
681 count++;
682 current_timeout <<= 1;
683 if (count >= 0xF)
684 break;
685 }
686
687 if (count >= 0xF) {
09eeff52
CB		 688 DBG("%s: Too large timeout 0x%x requested for CMD%d!\n",
689 mmc_hostname(host->mmc), count, cmd->opcode);
1c8cde92
PO		 690 count = 0xE;
691 }
692
ee53ab5d
PO		 693 return count;
694}
695
6aa943ab
AV		 696static void sdhci_set_transfer_irqs(struct sdhci_host *host)
697{
698 u32 pio_irqs = SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL;
699 u32 dma_irqs = SDHCI_INT_DMA_END | SDHCI_INT_ADMA_ERROR;
700
701 if (host->flags & SDHCI_REQ_USE_DMA)
b537f94c 702 host->ier = (host->ier & ~pio_irqs) | dma_irqs;
6aa943ab 703 else
b537f94c
RK		 704 host->ier = (host->ier & ~dma_irqs) | pio_irqs;
705
706 sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
707 sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
6aa943ab
AV		 708}
709
a3c7778f 710static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
ee53ab5d
PO		 711{
712 u8 count;
2134a922 713 u8 ctrl;
a3c7778f 714 struct mmc_data *data = cmd->data;
8f1934ce 715 int ret;
ee53ab5d
PO		 716
717 WARN_ON(host->data);
718
a3c7778f
AW		 719 if (data || (cmd->flags & MMC_RSP_BUSY)) {
720 count = sdhci_calc_timeout(host, cmd);
721 sdhci_writeb(host, count, SDHCI_TIMEOUT_CONTROL);
722 }
723
724 if (!data)
ee53ab5d
PO		 725 return;
726
727 /* Sanity checks */
728 BUG_ON(data->blksz * data->blocks > 524288);
729 BUG_ON(data->blksz > host->mmc->max_blk_size);
730 BUG_ON(data->blocks > 65535);
731
732 host->data = data;
733 host->data_early = 0;
f6a03cbf 734 host->data->bytes_xfered = 0;
ee53ab5d 735
a13abc7b 736 if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA))
c9fddbc4
PO		 737 host->flags |= SDHCI_REQ_USE_DMA;
738
2134a922
PO		 739 /*
740 * FIXME: This doesn't account for merging when mapping the
741 * scatterlist.
742 */
743 if (host->flags & SDHCI_REQ_USE_DMA) {
744 int broken, i;
745 struct scatterlist *sg;
746
747 broken = 0;
748 if (host->flags & SDHCI_USE_ADMA) {
749 if (host->quirks & SDHCI_QUIRK_32BIT_ADMA_SIZE)
750 broken = 1;
751 } else {
752 if (host->quirks & SDHCI_QUIRK_32BIT_DMA_SIZE)
753 broken = 1;
754 }
755
756 if (unlikely(broken)) {
757 for_each_sg(data->sg, sg, data->sg_len, i) {
758 if (sg->length & 0x3) {
759 DBG("Reverting to PIO because of "
760 "transfer size (%d)\n",
761 sg->length);
762 host->flags &= ~SDHCI_REQ_USE_DMA;
763 break;
764 }
765 }
766 }
c9fddbc4
PO		 767 }
768
769 /*
770 * The assumption here being that alignment is the same after
771 * translation to device address space.
772 */
2134a922
PO		 773 if (host->flags & SDHCI_REQ_USE_DMA) {
774 int broken, i;
775 struct scatterlist *sg;
776
777 broken = 0;
778 if (host->flags & SDHCI_USE_ADMA) {
779 /*
780 * As we use 3 byte chunks to work around
781 * alignment problems, we need to check this
782 * quirk.
783 */
784 if (host->quirks & SDHCI_QUIRK_32BIT_ADMA_SIZE)
785 broken = 1;
786 } else {
787 if (host->quirks & SDHCI_QUIRK_32BIT_DMA_ADDR)
788 broken = 1;
789 }
790
791 if (unlikely(broken)) {
792 for_each_sg(data->sg, sg, data->sg_len, i) {
793 if (sg->offset & 0x3) {
794 DBG("Reverting to PIO because of "
795 "bad alignment\n");
796 host->flags &= ~SDHCI_REQ_USE_DMA;
797 break;
798 }
799 }
800 }
801 }
802
8f1934ce
PO		 803 if (host->flags & SDHCI_REQ_USE_DMA) {
804 if (host->flags & SDHCI_USE_ADMA) {
805 ret = sdhci_adma_table_pre(host, data);
806 if (ret) {
807 /*
808 * This only happens when someone fed
809 * us an invalid request.
810 */
811 WARN_ON(1);
ebd6d357 812 host->flags &= ~SDHCI_REQ_USE_DMA;
8f1934ce 813 } else {
4e4141a5
AV		 814 sdhci_writel(host, host->adma_addr,
815 SDHCI_ADMA_ADDRESS);
8f1934ce
PO		 816 }
817 } else {
c8b3e02e 818 int sg_cnt;
8f1934ce 819
c8b3e02e 820 sg_cnt = dma_map_sg(mmc_dev(host->mmc),
8f1934ce
PO		 821 data->sg, data->sg_len,
822 (data->flags & MMC_DATA_READ) ?
823 DMA_FROM_DEVICE :
824 DMA_TO_DEVICE);
c8b3e02e 825 if (sg_cnt == 0) {
8f1934ce
PO		 826 /*
827 * This only happens when someone fed
828 * us an invalid request.
829 */
830 WARN_ON(1);
ebd6d357 831 host->flags &= ~SDHCI_REQ_USE_DMA;
8f1934ce 832 } else {
719a61b4 833 WARN_ON(sg_cnt != 1);
4e4141a5
AV		 834 sdhci_writel(host, sg_dma_address(data->sg),
835 SDHCI_DMA_ADDRESS);
8f1934ce
PO		 836 }
837 }
838 }
839
2134a922
PO		 840 /*
841 * Always adjust the DMA selection as some controllers
842 * (e.g. JMicron) can't do PIO properly when the selection
843 * is ADMA.
844 */
845 if (host->version >= SDHCI_SPEC_200) {
4e4141a5 846 ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
2134a922
PO		 847 ctrl &= ~SDHCI_CTRL_DMA_MASK;
848 if ((host->flags & SDHCI_REQ_USE_DMA) &&
849 (host->flags & SDHCI_USE_ADMA))
850 ctrl |= SDHCI_CTRL_ADMA32;
851 else
852 ctrl |= SDHCI_CTRL_SDMA;
4e4141a5 853 sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
c9fddbc4
PO		 854 }
855
8f1934ce 856 if (!(host->flags & SDHCI_REQ_USE_DMA)) {
da60a91d
SAS		 857 int flags;
858
859 flags = SG_MITER_ATOMIC;
860 if (host->data->flags & MMC_DATA_READ)
861 flags |= SG_MITER_TO_SG;
862 else
863 flags |= SG_MITER_FROM_SG;
864 sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags);
7659150c 865 host->blocks = data->blocks;
d129bceb 866 }
c7fa9963 867
6aa943ab
AV		 868 sdhci_set_transfer_irqs(host);
869
f6a03cbf
MV		 870 /* Set the DMA boundary value and block size */
871 sdhci_writew(host, SDHCI_MAKE_BLKSZ(SDHCI_DEFAULT_BOUNDARY_ARG,
872 data->blksz), SDHCI_BLOCK_SIZE);
4e4141a5 873 sdhci_writew(host, data->blocks, SDHCI_BLOCK_COUNT);
c7fa9963
PO		 874}
875
876static void sdhci_set_transfer_mode(struct sdhci_host *host,
e89d456f 877 struct mmc_command *cmd)
c7fa9963
PO		 878{
879 u16 mode;
e89d456f 880 struct mmc_data *data = cmd->data;
c7fa9963 881
2b558c13
DA		 882 if (data == NULL) {
883 /* clear Auto CMD settings for no data CMDs */
884 mode = sdhci_readw(host, SDHCI_TRANSFER_MODE);
885 sdhci_writew(host, mode & ~(SDHCI_TRNS_AUTO_CMD12 |
886 SDHCI_TRNS_AUTO_CMD23), SDHCI_TRANSFER_MODE);
c7fa9963 887 return;
2b558c13 888 }
c7fa9963 889
e538fbe8
PO		 890 WARN_ON(!host->data);
891
c7fa9963 892 mode = SDHCI_TRNS_BLK_CNT_EN;
e89d456f
AW		 893 if (mmc_op_multi(cmd->opcode) || data->blocks > 1) {
894 mode |= SDHCI_TRNS_MULTI;
895 /*
896 * If we are sending CMD23, CMD12 never gets sent
897 * on successful completion (so no Auto-CMD12).
898 */
899 if (!host->mrq->sbc && (host->flags & SDHCI_AUTO_CMD12))
900 mode |= SDHCI_TRNS_AUTO_CMD12;
8edf6371
AW		 901 else if (host->mrq->sbc && (host->flags & SDHCI_AUTO_CMD23)) {
902 mode |= SDHCI_TRNS_AUTO_CMD23;
903 sdhci_writel(host, host->mrq->sbc->arg, SDHCI_ARGUMENT2);
904 }
c4512f79 905 }
8edf6371 906
c7fa9963
PO		 907 if (data->flags & MMC_DATA_READ)
908 mode |= SDHCI_TRNS_READ;
c9fddbc4 909 if (host->flags & SDHCI_REQ_USE_DMA)
c7fa9963
PO		 910 mode |= SDHCI_TRNS_DMA;
911
4e4141a5 912 sdhci_writew(host, mode, SDHCI_TRANSFER_MODE);
d129bceb
PO		 913}
914
915static void sdhci_finish_data(struct sdhci_host *host)
916{
917 struct mmc_data *data;
d129bceb
PO		 918
919 BUG_ON(!host->data);
920
921 data = host->data;
922 host->data = NULL;
923
c9fddbc4 924 if (host->flags & SDHCI_REQ_USE_DMA) {
2134a922
PO		 925 if (host->flags & SDHCI_USE_ADMA)
926 sdhci_adma_table_post(host, data);
927 else {
928 dma_unmap_sg(mmc_dev(host->mmc), data->sg,
929 data->sg_len, (data->flags & MMC_DATA_READ) ?
930 DMA_FROM_DEVICE : DMA_TO_DEVICE);
931 }
d129bceb
PO		 932 }
933
934 /*
c9b74c5b
PO		 935 * The specification states that the block count register must
936 * be updated, but it does not specify at what point in the
937 * data flow. That makes the register entirely useless to read
938 * back so we have to assume that nothing made it to the card
939 * in the event of an error.
d129bceb 940 */
c9b74c5b
PO		 941 if (data->error)
942 data->bytes_xfered = 0;
d129bceb 943 else
c9b74c5b 944 data->bytes_xfered = data->blksz * data->blocks;
d129bceb 945
e89d456f
AW		 946 /*
947 * Need to send CMD12 if -
948 * a) open-ended multiblock transfer (no CMD23)
949 * b) error in multiblock transfer
950 */
951 if (data->stop &&
952 (data->error ||
953 !host->mrq->sbc)) {
954
d129bceb
PO		 955 /*
956 * The controller needs a reset of internal state machines
957 * upon error conditions.
958 */
17b0429d 959 if (data->error) {
03231f9b
RK		 960 sdhci_do_reset(host, SDHCI_RESET_CMD);
961 sdhci_do_reset(host, SDHCI_RESET_DATA);
d129bceb
PO		 962 }
963
964 sdhci_send_command(host, data->stop);
965 } else
966 tasklet_schedule(&host->finish_tasklet);
967}
968
c0e55129 969void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
d129bceb
PO		 970{
971 int flags;
fd2208d7 972 u32 mask;
7cb2c76f 973 unsigned long timeout;
d129bceb
PO		 974
975 WARN_ON(host->cmd);
976
d129bceb 977 /* Wait max 10 ms */
7cb2c76f 978 timeout = 10;
fd2208d7
PO		 979
980 mask = SDHCI_CMD_INHIBIT;
981 if ((cmd->data != NULL) || (cmd->flags & MMC_RSP_BUSY))
982 mask |= SDHCI_DATA_INHIBIT;
983
984 /* We shouldn't wait for data inihibit for stop commands, even
985 though they might use busy signaling */
986 if (host->mrq->data && (cmd == host->mrq->data->stop))
987 mask &= ~SDHCI_DATA_INHIBIT;
988
4e4141a5 989 while (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask) {
7cb2c76f 990 if (timeout == 0) {
a3c76eb9 991 pr_err("%s: Controller never released "
acf1da45 992 "inhibit bit(s).\n", mmc_hostname(host->mmc));
d129bceb 993 sdhci_dumpregs(host);
17b0429d 994 cmd->error = -EIO;
d129bceb
PO		 995 tasklet_schedule(&host->finish_tasklet);
996 return;
997 }
7cb2c76f
PO		 998 timeout--;
999 mdelay(1);
1000 }
d129bceb 1001
3e1a6892 1002 timeout = jiffies;
1d4d7744
UH		 1003 if (!cmd->data && cmd->busy_timeout > 9000)
1004 timeout += DIV_ROUND_UP(cmd->busy_timeout, 1000) * HZ + HZ;
3e1a6892
AH		 1005 else
1006 timeout += 10 * HZ;
1007 mod_timer(&host->timer, timeout);
d129bceb
PO		 1008
1009 host->cmd = cmd;
1010
a3c7778f 1011 sdhci_prepare_data(host, cmd);
d129bceb 1012
4e4141a5 1013 sdhci_writel(host, cmd->arg, SDHCI_ARGUMENT);
d129bceb 1014
e89d456f 1015 sdhci_set_transfer_mode(host, cmd);
c7fa9963 1016
d129bceb 1017 if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) {
a3c76eb9 1018 pr_err("%s: Unsupported response type!\n",
d129bceb 1019 mmc_hostname(host->mmc));
17b0429d 1020 cmd->error = -EINVAL;
d129bceb
PO		 1021 tasklet_schedule(&host->finish_tasklet);
1022 return;
1023 }
1024
1025 if (!(cmd->flags & MMC_RSP_PRESENT))
1026 flags = SDHCI_CMD_RESP_NONE;
1027 else if (cmd->flags & MMC_RSP_136)
1028 flags = SDHCI_CMD_RESP_LONG;
1029 else if (cmd->flags & MMC_RSP_BUSY)
1030 flags = SDHCI_CMD_RESP_SHORT_BUSY;
1031 else
1032 flags = SDHCI_CMD_RESP_SHORT;
1033
1034 if (cmd->flags & MMC_RSP_CRC)
1035 flags |= SDHCI_CMD_CRC;
1036 if (cmd->flags & MMC_RSP_OPCODE)
1037 flags |= SDHCI_CMD_INDEX;
b513ea25
AN		 1038
1039 /* CMD19 is special in that the Data Present Select should be set */
069c9f14
G		 1040 if (cmd->data || cmd->opcode == MMC_SEND_TUNING_BLOCK ||
1041 cmd->opcode == MMC_SEND_TUNING_BLOCK_HS200)
d129bceb
PO		 1042 flags |= SDHCI_CMD_DATA;
1043
4e4141a5 1044 sdhci_writew(host, SDHCI_MAKE_CMD(cmd->opcode, flags), SDHCI_COMMAND);
d129bceb 1045}
c0e55129 1046EXPORT_SYMBOL_GPL(sdhci_send_command);
d129bceb
PO		 1047
1048static void sdhci_finish_command(struct sdhci_host *host)
1049{
1050 int i;
1051
1052 BUG_ON(host->cmd == NULL);
1053
1054 if (host->cmd->flags & MMC_RSP_PRESENT) {
1055 if (host->cmd->flags & MMC_RSP_136) {
1056 /* CRC is stripped so we need to do some shifting. */
1057 for (i = 0;i < 4;i++) {
4e4141a5 1058 host->cmd->resp[i] = sdhci_readl(host,
d129bceb
PO		 1059 SDHCI_RESPONSE + (3-i)*4) << 8;
1060 if (i != 3)
1061 host->cmd->resp[i] |=
4e4141a5 1062 sdhci_readb(host,
d129bceb
PO		 1063 SDHCI_RESPONSE + (3-i)*4-1);
1064 }
1065 } else {
4e4141a5 1066 host->cmd->resp[0] = sdhci_readl(host, SDHCI_RESPONSE);
d129bceb
PO		 1067 }
1068 }
1069
17b0429d 1070 host->cmd->error = 0;
d129bceb 1071
e89d456f
AW		 1072 /* Finished CMD23, now send actual command. */
1073 if (host->cmd == host->mrq->sbc) {
1074 host->cmd = NULL;
1075 sdhci_send_command(host, host->mrq->cmd);
1076 } else {
e538fbe8 1077
e89d456f
AW		 1078 /* Processed actual command. */
1079 if (host->data && host->data_early)
1080 sdhci_finish_data(host);
d129bceb 1081
e89d456f
AW		 1082 if (!host->cmd->data)
1083 tasklet_schedule(&host->finish_tasklet);
1084
1085 host->cmd = NULL;
1086 }
d129bceb
PO		 1087}
1088
52983382
KL		 1089static u16 sdhci_get_preset_value(struct sdhci_host *host)
1090{
d975f121 1091 u16 preset = 0;
52983382 1092
d975f121
RK		 1093 switch (host->timing) {
1094 case MMC_TIMING_UHS_SDR12:
52983382
KL		 1095 preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR12);
1096 break;
d975f121 1097 case MMC_TIMING_UHS_SDR25:
52983382
KL		 1098 preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR25);
1099 break;
d975f121 1100 case MMC_TIMING_UHS_SDR50:
52983382
KL		 1101 preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR50);
1102 break;
d975f121
RK		 1103 case MMC_TIMING_UHS_SDR104:
1104 case MMC_TIMING_MMC_HS200:
52983382
KL		 1105 preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR104);
1106 break;
d975f121 1107 case MMC_TIMING_UHS_DDR50:
52983382
KL		 1108 preset = sdhci_readw(host, SDHCI_PRESET_FOR_DDR50);
1109 break;
1110 default:
1111 pr_warn("%s: Invalid UHS-I mode selected\n",
1112 mmc_hostname(host->mmc));
1113 preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR12);
1114 break;
1115 }
1116 return preset;
1117}
1118
1771059c 1119void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
d129bceb 1120{
c3ed3877 1121 int div = 0; /* Initialized for compiler warning */
df16219f 1122 int real_div = div, clk_mul = 1;
c3ed3877 1123 u16 clk = 0;
7cb2c76f 1124 unsigned long timeout;
d129bceb 1125
1650d0c7
RK		 1126 host->mmc->actual_clock = 0;
1127
4e4141a5 1128 sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
d129bceb
PO		 1129
1130 if (clock == 0)
373073ef 1131 return;
d129bceb 1132
85105c53 1133 if (host->version >= SDHCI_SPEC_300) {
da91a8f9 1134 if (host->preset_enabled) {
52983382
KL		 1135 u16 pre_val;
1136
1137 clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
1138 pre_val = sdhci_get_preset_value(host);
1139 div = (pre_val & SDHCI_PRESET_SDCLK_FREQ_MASK)
1140 >> SDHCI_PRESET_SDCLK_FREQ_SHIFT;
1141 if (host->clk_mul &&
1142 (pre_val & SDHCI_PRESET_CLKGEN_SEL_MASK)) {
1143 clk = SDHCI_PROG_CLOCK_MODE;
1144 real_div = div + 1;
1145 clk_mul = host->clk_mul;
1146 } else {
1147 real_div = max_t(int, 1, div << 1);
1148 }
1149 goto clock_set;
1150 }
1151
c3ed3877
AN		 1152 /*
1153 * Check if the Host Controller supports Programmable Clock
1154 * Mode.
1155 */
1156 if (host->clk_mul) {
52983382
KL		 1157 for (div = 1; div <= 1024; div++) {
1158 if ((host->max_clk * host->clk_mul / div)
1159 <= clock)
1160 break;
1161 }
c3ed3877 1162 /*
52983382
KL		 1163 * Set Programmable Clock Mode in the Clock
1164 * Control register.
c3ed3877 1165 */
52983382
KL		 1166 clk = SDHCI_PROG_CLOCK_MODE;
1167 real_div = div;
1168 clk_mul = host->clk_mul;
1169 div--;
c3ed3877
AN		 1170 } else {
1171 /* Version 3.00 divisors must be a multiple of 2. */
1172 if (host->max_clk <= clock)
1173 div = 1;
1174 else {
1175 for (div = 2; div < SDHCI_MAX_DIV_SPEC_300;
1176 div += 2) {
1177 if ((host->max_clk / div) <= clock)
1178 break;
1179 }
85105c53 1180 }
df16219f 1181 real_div = div;
c3ed3877 1182 div >>= 1;
85105c53
ZG		 1183 }
1184 } else {
1185 /* Version 2.00 divisors must be a power of 2. */
0397526d 1186 for (div = 1; div < SDHCI_MAX_DIV_SPEC_200; div *= 2) {
85105c53
ZG		 1187 if ((host->max_clk / div) <= clock)
1188 break;
1189 }
df16219f 1190 real_div = div;
c3ed3877 1191 div >>= 1;
d129bceb 1192 }
d129bceb 1193
52983382 1194clock_set:
df16219f
GC		 1195 if (real_div)
1196 host->mmc->actual_clock = (host->max_clk * clk_mul) / real_div;
1197
c3ed3877 1198 clk |= (div & SDHCI_DIV_MASK) << SDHCI_DIVIDER_SHIFT;
85105c53
ZG		 1199 clk |= ((div & SDHCI_DIV_HI_MASK) >> SDHCI_DIV_MASK_LEN)
1200 << SDHCI_DIVIDER_HI_SHIFT;
d129bceb 1201 clk |= SDHCI_CLOCK_INT_EN;
4e4141a5 1202 sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
d129bceb 1203
27f6cb16
CB		 1204 /* Wait max 20 ms */
1205 timeout = 20;
4e4141a5 1206 while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
7cb2c76f
PO		 1207 & SDHCI_CLOCK_INT_STABLE)) {
1208 if (timeout == 0) {
a3c76eb9 1209 pr_err("%s: Internal clock never "
acf1da45 1210 "stabilised.\n", mmc_hostname(host->mmc));
d129bceb
PO		 1211 sdhci_dumpregs(host);
1212 return;
1213 }
7cb2c76f
PO		 1214 timeout--;
1215 mdelay(1);
1216 }
d129bceb
PO		 1217
1218 clk |= SDHCI_CLOCK_CARD_EN;
4e4141a5 1219 sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
d129bceb 1220}
1771059c 1221EXPORT_SYMBOL_GPL(sdhci_set_clock);
d129bceb 1222
24fbb3ca
RK		 1223static void sdhci_set_power(struct sdhci_host *host, unsigned char mode,
1224 unsigned short vdd)
146ad66e 1225{
3a48edc4 1226 struct mmc_host *mmc = host->mmc;
8364248a 1227 u8 pwr = 0;
146ad66e 1228
24fbb3ca
RK		 1229 if (mode != MMC_POWER_OFF) {
1230 switch (1 << vdd) {
ae628903
PO		 1231 case MMC_VDD_165_195:
1232 pwr = SDHCI_POWER_180;
1233 break;
1234 case MMC_VDD_29_30:
1235 case MMC_VDD_30_31:
1236 pwr = SDHCI_POWER_300;
1237 break;
1238 case MMC_VDD_32_33:
1239 case MMC_VDD_33_34:
1240 pwr = SDHCI_POWER_330;
1241 break;
1242 default:
1243 BUG();
1244 }
1245 }
1246
1247 if (host->pwr == pwr)
e921a8b6 1248 return;
146ad66e 1249
ae628903
PO		 1250 host->pwr = pwr;
1251
1252 if (pwr == 0) {
4e4141a5 1253 sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
f0710a55
AH		 1254 if (host->quirks2 & SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON)
1255 sdhci_runtime_pm_bus_off(host);
24fbb3ca 1256 vdd = 0;
e921a8b6
RK		 1257 } else {
1258 /*
1259 * Spec says that we should clear the power reg before setting
1260 * a new value. Some controllers don't seem to like this though.
1261 */
1262 if (!(host->quirks & SDHCI_QUIRK_SINGLE_POWER_WRITE))
1263 sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
146ad66e 1264
e921a8b6
RK		 1265 /*
1266 * At least the Marvell CaFe chip gets confused if we set the
1267 * voltage and set turn on power at the same time, so set the
1268 * voltage first.
1269 */
1270 if (host->quirks & SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER)
1271 sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
e08c1694 1272
e921a8b6 1273 pwr |= SDHCI_POWER_ON;
146ad66e 1274
e921a8b6 1275 sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
557b0697 1276
e921a8b6
RK		 1277 if (host->quirks2 & SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON)
1278 sdhci_runtime_pm_bus_on(host);
f0710a55 1279
e921a8b6
RK		 1280 /*
1281 * Some controllers need an extra 10ms delay of 10ms before
1282 * they can apply clock after applying power
1283 */
1284 if (host->quirks & SDHCI_QUIRK_DELAY_AFTER_POWER)
1285 mdelay(10);
1286 }
ceb6143b 1287
3a48edc4 1288 if (!IS_ERR(mmc->supply.vmmc)) {
e921a8b6 1289 spin_unlock_irq(&host->lock);
3a48edc4 1290 mmc_regulator_set_ocr(host->mmc, mmc->supply.vmmc, vdd);
e921a8b6
RK		 1291 spin_lock_irq(&host->lock);
1292 }
146ad66e
PO		 1293}
1294
d129bceb
PO		 1295/*****************************************************************************\
1296 * *
1297 * MMC callbacks *
1298 * *
1299\*****************************************************************************/
1300
1301static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
1302{
1303 struct sdhci_host *host;
505a8680 1304 int present;
d129bceb 1305 unsigned long flags;
473b095a 1306 u32 tuning_opcode;
d129bceb
PO		 1307
1308 host = mmc_priv(mmc);
1309
66fd8ad5
AH		 1310 sdhci_runtime_pm_get(host);
1311
d129bceb
PO		 1312 spin_lock_irqsave(&host->lock, flags);
1313
1314 WARN_ON(host->mrq != NULL);
1315
f9134319 1316#ifndef SDHCI_USE_LEDS_CLASS
d129bceb 1317 sdhci_activate_led(host);
2f730fec 1318#endif
e89d456f
AW		 1319
1320 /*
1321 * Ensure we don't send the STOP for non-SET_BLOCK_COUNTED
1322 * requests if Auto-CMD12 is enabled.
1323 */
1324 if (!mrq->sbc && (host->flags & SDHCI_AUTO_CMD12)) {
c4512f79
JH		 1325 if (mrq->stop) {
1326 mrq->data->stop = NULL;
1327 mrq->stop = NULL;
1328 }
1329 }
d129bceb
PO		 1330
1331 host->mrq = mrq;
1332
505a8680
SG		 1333 /*
1334 * Firstly check card presence from cd-gpio. The return could
1335 * be one of the following possibilities:
1336 * negative: cd-gpio is not available
1337 * zero: cd-gpio is used, and card is removed
1338 * one: cd-gpio is used, and card is present
1339 */
1340 present = mmc_gpio_get_cd(host->mmc);
1341 if (present < 0) {
1342 /* If polling, assume that the card is always present. */
1343 if (host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION)
1344 present = 1;
1345 else
1346 present = sdhci_readl(host, SDHCI_PRESENT_STATE) &
1347 SDHCI_CARD_PRESENT;
bec9d4e5
GL		 1348 }
1349
68d1fb7e 1350 if (!present || host->flags & SDHCI_DEVICE_DEAD) {
17b0429d 1351 host->mrq->cmd->error = -ENOMEDIUM;
d129bceb 1352 tasklet_schedule(&host->finish_tasklet);
cf2b5eea
AN		 1353 } else {
1354 u32 present_state;
1355
1356 present_state = sdhci_readl(host, SDHCI_PRESENT_STATE);
1357 /*
1358 * Check if the re-tuning timer has already expired and there
1359 * is no on-going data transfer. If so, we need to execute
1360 * tuning procedure before sending command.
1361 */
1362 if ((host->flags & SDHCI_NEEDS_RETUNING) &&
1363 !(present_state & (SDHCI_DOING_WRITE | SDHCI_DOING_READ))) {
14efd957
CB		 1364 if (mmc->card) {
1365 /* eMMC uses cmd21 but sd and sdio use cmd19 */
1366 tuning_opcode =
1367 mmc->card->type == MMC_TYPE_MMC ?
1368 MMC_SEND_TUNING_BLOCK_HS200 :
1369 MMC_SEND_TUNING_BLOCK;
63c21180
CL		 1370
1371 /* Here we need to set the host->mrq to NULL,
1372 * in case the pending finish_tasklet
1373 * finishes it incorrectly.
1374 */
1375 host->mrq = NULL;
1376
14efd957
CB		 1377 spin_unlock_irqrestore(&host->lock, flags);
1378 sdhci_execute_tuning(mmc, tuning_opcode);
1379 spin_lock_irqsave(&host->lock, flags);
1380
1381 /* Restore original mmc_request structure */
1382 host->mrq = mrq;
1383 }
cf2b5eea
AN		 1384 }
1385
8edf6371 1386 if (mrq->sbc && !(host->flags & SDHCI_AUTO_CMD23))
e89d456f
AW		 1387 sdhci_send_command(host, mrq->sbc);
1388 else
1389 sdhci_send_command(host, mrq->cmd);
cf2b5eea 1390 }
d129bceb 1391
5f25a66f 1392 mmiowb();
d129bceb
PO		 1393 spin_unlock_irqrestore(&host->lock, flags);
1394}
1395
2317f56c
RK		 1396void sdhci_set_bus_width(struct sdhci_host *host, int width)
1397{
1398 u8 ctrl;
1399
1400 ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
1401 if (width == MMC_BUS_WIDTH_8) {
1402 ctrl &= ~SDHCI_CTRL_4BITBUS;
1403 if (host->version >= SDHCI_SPEC_300)
1404 ctrl |= SDHCI_CTRL_8BITBUS;
1405 } else {
1406 if (host->version >= SDHCI_SPEC_300)
1407 ctrl &= ~SDHCI_CTRL_8BITBUS;
1408 if (width == MMC_BUS_WIDTH_4)
1409 ctrl |= SDHCI_CTRL_4BITBUS;
1410 else
1411 ctrl &= ~SDHCI_CTRL_4BITBUS;
1412 }
1413 sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
1414}
1415EXPORT_SYMBOL_GPL(sdhci_set_bus_width);
1416
96d7b78c
RK		 1417void sdhci_set_uhs_signaling(struct sdhci_host *host, unsigned timing)
1418{
1419 u16 ctrl_2;
1420
1421 ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
1422 /* Select Bus Speed Mode for host */
1423 ctrl_2 &= ~SDHCI_CTRL_UHS_MASK;
1424 if ((timing == MMC_TIMING_MMC_HS200) ||
1425 (timing == MMC_TIMING_UHS_SDR104))
1426 ctrl_2 |= SDHCI_CTRL_UHS_SDR104;
1427 else if (timing == MMC_TIMING_UHS_SDR12)
1428 ctrl_2 |= SDHCI_CTRL_UHS_SDR12;
1429 else if (timing == MMC_TIMING_UHS_SDR25)
1430 ctrl_2 |= SDHCI_CTRL_UHS_SDR25;
1431 else if (timing == MMC_TIMING_UHS_SDR50)
1432 ctrl_2 |= SDHCI_CTRL_UHS_SDR50;
1433 else if ((timing == MMC_TIMING_UHS_DDR50) ||
1434 (timing == MMC_TIMING_MMC_DDR52))
1435 ctrl_2 |= SDHCI_CTRL_UHS_DDR50;
1436 sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
1437}
1438EXPORT_SYMBOL_GPL(sdhci_set_uhs_signaling);
1439
66fd8ad5 1440static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios)
d129bceb 1441{
d129bceb
PO		 1442 unsigned long flags;
1443 u8 ctrl;
3a48edc4 1444 struct mmc_host *mmc = host->mmc;
d129bceb 1445
d129bceb
PO		 1446 spin_lock_irqsave(&host->lock, flags);
1447
ceb6143b
AH		 1448 if (host->flags & SDHCI_DEVICE_DEAD) {
1449 spin_unlock_irqrestore(&host->lock, flags);
3a48edc4
TK		 1450 if (!IS_ERR(mmc->supply.vmmc) &&
1451 ios->power_mode == MMC_POWER_OFF)
1452 mmc_regulator_set_ocr(host->mmc, mmc->supply.vmmc, 0);
ceb6143b
AH		 1453 return;
1454 }
1e72859e 1455
d129bceb
PO		 1456 /*
1457 * Reset the chip on each power off.
1458 * Should clear out any weird states.
1459 */
1460 if (ios->power_mode == MMC_POWER_OFF) {
4e4141a5 1461 sdhci_writel(host, 0, SDHCI_SIGNAL_ENABLE);
7260cf5e 1462 sdhci_reinit(host);
d129bceb
PO		 1463 }
1464
52983382 1465 if (host->version >= SDHCI_SPEC_300 &&
372c4634
DA		 1466 (ios->power_mode == MMC_POWER_UP) &&
1467 !(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN))
52983382
KL		 1468 sdhci_enable_preset_value(host, false);
1469
373073ef 1470 if (!ios->clock || ios->clock != host->clock) {
1771059c 1471 host->ops->set_clock(host, ios->clock);
373073ef
RK		 1472 host->clock = ios->clock;
1473 }
d129bceb 1474
24fbb3ca 1475 sdhci_set_power(host, ios->power_mode, ios->vdd);
d129bceb 1476
643a81ff
PR		 1477 if (host->ops->platform_send_init_74_clocks)
1478 host->ops->platform_send_init_74_clocks(host, ios->power_mode);
1479
2317f56c 1480 host->ops->set_bus_width(host, ios->bus_width);
ae6d6c92 1481
15ec4461 1482 ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
cd9277c0 1483
3ab9c8da
PR		 1484 if ((ios->timing == MMC_TIMING_SD_HS ||
1485 ios->timing == MMC_TIMING_MMC_HS)
1486 && !(host->quirks & SDHCI_QUIRK_NO_HISPD_BIT))
cd9277c0
PO		 1487 ctrl |= SDHCI_CTRL_HISPD;
1488 else
1489 ctrl &= ~SDHCI_CTRL_HISPD;
1490
d6d50a15 1491 if (host->version >= SDHCI_SPEC_300) {
49c468fc 1492 u16 clk, ctrl_2;
49c468fc
AN		 1493
1494 /* In case of UHS-I modes, set High Speed Enable */
069c9f14 1495 if ((ios->timing == MMC_TIMING_MMC_HS200) ||
bb8175a8 1496 (ios->timing == MMC_TIMING_MMC_DDR52) ||
069c9f14 1497 (ios->timing == MMC_TIMING_UHS_SDR50) ||
49c468fc
AN		 1498 (ios->timing == MMC_TIMING_UHS_SDR104) ||
1499 (ios->timing == MMC_TIMING_UHS_DDR50) ||
dd8df17f 1500 (ios->timing == MMC_TIMING_UHS_SDR25))
49c468fc 1501 ctrl |= SDHCI_CTRL_HISPD;
d6d50a15 1502
da91a8f9 1503 if (!host->preset_enabled) {
758535c4 1504 sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
d6d50a15
AN		 1505 /*
1506 * We only need to set Driver Strength if the
1507 * preset value enable is not set.
1508 */
da91a8f9 1509 ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
d6d50a15
AN		 1510 ctrl_2 &= ~SDHCI_CTRL_DRV_TYPE_MASK;
1511 if (ios->drv_type == MMC_SET_DRIVER_TYPE_A)
1512 ctrl_2 |= SDHCI_CTRL_DRV_TYPE_A;
1513 else if (ios->drv_type == MMC_SET_DRIVER_TYPE_C)
1514 ctrl_2 |= SDHCI_CTRL_DRV_TYPE_C;
1515
1516 sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
758535c4
AN		 1517 } else {
1518 /*
1519 * According to SDHC Spec v3.00, if the Preset Value
1520 * Enable in the Host Control 2 register is set, we
1521 * need to reset SD Clock Enable before changing High
1522 * Speed Enable to avoid generating clock gliches.
1523 */
758535c4
AN		 1524
1525 /* Reset SD Clock Enable */
1526 clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
1527 clk &= ~SDHCI_CLOCK_CARD_EN;
1528 sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
1529
1530 sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
1531
1532 /* Re-enable SD Clock */
1771059c 1533 host->ops->set_clock(host, host->clock);
d6d50a15 1534 }
49c468fc 1535
49c468fc
AN		 1536
1537 /* Reset SD Clock Enable */
1538 clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
1539 clk &= ~SDHCI_CLOCK_CARD_EN;
1540 sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
1541
96d7b78c 1542 host->ops->set_uhs_signaling(host, ios->timing);
d975f121 1543 host->timing = ios->timing;
49c468fc 1544
52983382
KL		 1545 if (!(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN) &&
1546 ((ios->timing == MMC_TIMING_UHS_SDR12) ||
1547 (ios->timing == MMC_TIMING_UHS_SDR25) ||
1548 (ios->timing == MMC_TIMING_UHS_SDR50) ||
1549 (ios->timing == MMC_TIMING_UHS_SDR104) ||
1550 (ios->timing == MMC_TIMING_UHS_DDR50))) {
1551 u16 preset;
1552
1553 sdhci_enable_preset_value(host, true);
1554 preset = sdhci_get_preset_value(host);
1555 ios->drv_type = (preset & SDHCI_PRESET_DRV_MASK)
1556 >> SDHCI_PRESET_DRV_SHIFT;
1557 }
1558
49c468fc 1559 /* Re-enable SD Clock */
1771059c 1560 host->ops->set_clock(host, host->clock);
758535c4
AN		 1561 } else
1562 sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
d6d50a15 1563
b8352260
LD		 1564 /*
1565 * Some (ENE) controllers go apeshit on some ios operation,
1566 * signalling timeout and CRC errors even on CMD0. Resetting
1567 * it on each ios seems to solve the problem.
1568 */
b8c86fc5 1569 if(host->quirks & SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS)
03231f9b 1570 sdhci_do_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA);
b8352260 1571
5f25a66f 1572 mmiowb();
d129bceb
PO		 1573 spin_unlock_irqrestore(&host->lock, flags);
1574}
1575
66fd8ad5
AH		 1576static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
1577{
1578 struct sdhci_host *host = mmc_priv(mmc);
1579
1580 sdhci_runtime_pm_get(host);
1581 sdhci_do_set_ios(host, ios);
1582 sdhci_runtime_pm_put(host);
1583}
1584
94144a46
KL		 1585static int sdhci_do_get_cd(struct sdhci_host *host)
1586{
1587 int gpio_cd = mmc_gpio_get_cd(host->mmc);
1588
1589 if (host->flags & SDHCI_DEVICE_DEAD)
1590 return 0;
1591
1592 /* If polling/nonremovable, assume that the card is always present. */
1593 if ((host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION) ||
1594 (host->mmc->caps & MMC_CAP_NONREMOVABLE))
1595 return 1;
1596
1597 /* Try slot gpio detect */
1598 if (!IS_ERR_VALUE(gpio_cd))
1599 return !!gpio_cd;
1600
1601 /* Host native card detect */
1602 return !!(sdhci_readl(host, SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT);
1603}
1604
1605static int sdhci_get_cd(struct mmc_host *mmc)
1606{
1607 struct sdhci_host *host = mmc_priv(mmc);
1608 int ret;
1609
1610 sdhci_runtime_pm_get(host);
1611 ret = sdhci_do_get_cd(host);
1612 sdhci_runtime_pm_put(host);
1613 return ret;
1614}
1615
66fd8ad5 1616static int sdhci_check_ro(struct sdhci_host *host)
d129bceb 1617{
d129bceb 1618 unsigned long flags;
2dfb579c 1619 int is_readonly;
d129bceb 1620
d129bceb
PO		 1621 spin_lock_irqsave(&host->lock, flags);
1622
1e72859e 1623 if (host->flags & SDHCI_DEVICE_DEAD)
2dfb579c
WS		 1624 is_readonly = 0;
1625 else if (host->ops->get_ro)
1626 is_readonly = host->ops->get_ro(host);
1e72859e 1627 else
2dfb579c
WS		 1628 is_readonly = !(sdhci_readl(host, SDHCI_PRESENT_STATE)
1629 & SDHCI_WRITE_PROTECT);
d129bceb
PO		 1630
1631 spin_unlock_irqrestore(&host->lock, flags);
1632
2dfb579c
WS		 1633 /* This quirk needs to be replaced by a callback-function later */
1634 return host->quirks & SDHCI_QUIRK_INVERTED_WRITE_PROTECT ?
1635 !is_readonly : is_readonly;
d129bceb
PO		 1636}
1637
82b0e23a
TI		 1638#define SAMPLE_COUNT 5
1639
66fd8ad5 1640static int sdhci_do_get_ro(struct sdhci_host *host)
82b0e23a 1641{
82b0e23a
TI		 1642 int i, ro_count;
1643
82b0e23a 1644 if (!(host->quirks & SDHCI_QUIRK_UNSTABLE_RO_DETECT))
66fd8ad5 1645 return sdhci_check_ro(host);
82b0e23a
TI		 1646
1647 ro_count = 0;
1648 for (i = 0; i < SAMPLE_COUNT; i++) {
66fd8ad5 1649 if (sdhci_check_ro(host)) {
82b0e23a
TI		 1650 if (++ro_count > SAMPLE_COUNT / 2)
1651 return 1;
1652 }
1653 msleep(30);
1654 }
1655 return 0;
1656}
1657
20758b66
AH		 1658static void sdhci_hw_reset(struct mmc_host *mmc)
1659{
1660 struct sdhci_host *host = mmc_priv(mmc);
1661
1662 if (host->ops && host->ops->hw_reset)
1663 host->ops->hw_reset(host);
1664}
1665
66fd8ad5 1666static int sdhci_get_ro(struct mmc_host *mmc)
f75979b7 1667{
66fd8ad5
AH		 1668 struct sdhci_host *host = mmc_priv(mmc);
1669 int ret;
f75979b7 1670
66fd8ad5
AH		 1671 sdhci_runtime_pm_get(host);
1672 ret = sdhci_do_get_ro(host);
1673 sdhci_runtime_pm_put(host);
1674 return ret;
1675}
f75979b7 1676
66fd8ad5
AH		 1677static void sdhci_enable_sdio_irq_nolock(struct sdhci_host *host, int enable)
1678{
be138554 1679 if (!(host->flags & SDHCI_DEVICE_DEAD)) {
ef104333 1680 if (enable)
b537f94c 1681 host->ier |= SDHCI_INT_CARD_INT;
ef104333 1682 else
b537f94c
RK		 1683 host->ier &= ~SDHCI_INT_CARD_INT;
1684
1685 sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
1686 sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
ef104333
RK		 1687 mmiowb();
1688 }
66fd8ad5
AH		 1689}
1690
1691static void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable)
1692{
1693 struct sdhci_host *host = mmc_priv(mmc);
1694 unsigned long flags;
f75979b7 1695
ef104333
RK		 1696 sdhci_runtime_pm_get(host);
1697
66fd8ad5 1698 spin_lock_irqsave(&host->lock, flags);
ef104333
RK		 1699 if (enable)
1700 host->flags |= SDHCI_SDIO_IRQ_ENABLED;
1701 else
1702 host->flags &= ~SDHCI_SDIO_IRQ_ENABLED;
1703
66fd8ad5 1704 sdhci_enable_sdio_irq_nolock(host, enable);
f75979b7 1705 spin_unlock_irqrestore(&host->lock, flags);
ef104333
RK		 1706
1707 sdhci_runtime_pm_put(host);
f75979b7
PO		 1708}
1709
20b92a30 1710static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
21f5998f 1711 struct mmc_ios *ios)
f2119df6 1712{
3a48edc4 1713 struct mmc_host *mmc = host->mmc;
20b92a30 1714 u16 ctrl;
6231f3de 1715 int ret;
f2119df6 1716
20b92a30
KL		 1717 /*
1718 * Signal Voltage Switching is only applicable for Host Controllers
1719 * v3.00 and above.
1720 */
1721 if (host->version < SDHCI_SPEC_300)
1722 return 0;
6231f3de 1723
f2119df6 1724 ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
f2119df6 1725
21f5998f 1726 switch (ios->signal_voltage) {
20b92a30
KL		 1727 case MMC_SIGNAL_VOLTAGE_330:
1728 /* Set 1.8V Signal Enable in the Host Control2 register to 0 */
1729 ctrl &= ~SDHCI_CTRL_VDD_180;
1730 sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
f2119df6 1731
3a48edc4
TK		 1732 if (!IS_ERR(mmc->supply.vqmmc)) {
1733 ret = regulator_set_voltage(mmc->supply.vqmmc, 2700000,
1734 3600000);
20b92a30
KL		 1735 if (ret) {
1736 pr_warning("%s: Switching to 3.3V signalling voltage "
1737 " failed\n", mmc_hostname(host->mmc));
1738 return -EIO;
1739 }
1740 }
1741 /* Wait for 5ms */
1742 usleep_range(5000, 5500);
f2119df6 1743
20b92a30
KL		 1744 /* 3.3V regulator output should be stable within 5 ms */
1745 ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
1746 if (!(ctrl & SDHCI_CTRL_VDD_180))
1747 return 0;
6231f3de 1748
20b92a30
KL		 1749 pr_warning("%s: 3.3V regulator output did not became stable\n",
1750 mmc_hostname(host->mmc));
1751
1752 return -EAGAIN;
1753 case MMC_SIGNAL_VOLTAGE_180:
3a48edc4
TK		 1754 if (!IS_ERR(mmc->supply.vqmmc)) {
1755 ret = regulator_set_voltage(mmc->supply.vqmmc,
20b92a30
KL		 1756 1700000, 1950000);
1757 if (ret) {
1758 pr_warning("%s: Switching to 1.8V signalling voltage "
1759 " failed\n", mmc_hostname(host->mmc));
1760 return -EIO;
1761 }
1762 }
6231f3de 1763
6231f3de
PR		 1764 /*
1765 * Enable 1.8V Signal Enable in the Host Control2
1766 * register
1767 */
20b92a30
KL		 1768 ctrl |= SDHCI_CTRL_VDD_180;
1769 sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
6231f3de 1770
20b92a30
KL		 1771 /* Wait for 5ms */
1772 usleep_range(5000, 5500);
f2119df6 1773
20b92a30
KL		 1774 /* 1.8V regulator output should be stable within 5 ms */
1775 ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
1776 if (ctrl & SDHCI_CTRL_VDD_180)
1777 return 0;
f2119df6 1778
20b92a30
KL		 1779 pr_warning("%s: 1.8V regulator output did not became stable\n",
1780 mmc_hostname(host->mmc));
f2119df6 1781
20b92a30
KL		 1782 return -EAGAIN;
1783 case MMC_SIGNAL_VOLTAGE_120:
3a48edc4
TK		 1784 if (!IS_ERR(mmc->supply.vqmmc)) {
1785 ret = regulator_set_voltage(mmc->supply.vqmmc, 1100000,
1786 1300000);
20b92a30
KL		 1787 if (ret) {
1788 pr_warning("%s: Switching to 1.2V signalling voltage "
1789 " failed\n", mmc_hostname(host->mmc));
1790 return -EIO;
f2119df6
AN		 1791 }
1792 }
6231f3de 1793 return 0;
20b92a30 1794 default:
f2119df6
AN		 1795 /* No signal voltage switch required */
1796 return 0;
20b92a30 1797 }
f2119df6
AN		 1798}
1799
66fd8ad5 1800static int sdhci_start_signal_voltage_switch(struct mmc_host *mmc,
21f5998f 1801 struct mmc_ios *ios)
66fd8ad5
AH		 1802{
1803 struct sdhci_host *host = mmc_priv(mmc);
1804 int err;
1805
1806 if (host->version < SDHCI_SPEC_300)
1807 return 0;
1808 sdhci_runtime_pm_get(host);
21f5998f 1809 err = sdhci_do_start_signal_voltage_switch(host, ios);
66fd8ad5
AH		 1810 sdhci_runtime_pm_put(host);
1811 return err;
1812}
1813
20b92a30
KL		 1814static int sdhci_card_busy(struct mmc_host *mmc)
1815{
1816 struct sdhci_host *host = mmc_priv(mmc);
1817 u32 present_state;
1818
1819 sdhci_runtime_pm_get(host);
1820 /* Check whether DAT[3:0] is 0000 */
1821 present_state = sdhci_readl(host, SDHCI_PRESENT_STATE);
1822 sdhci_runtime_pm_put(host);
1823
1824 return !(present_state & SDHCI_DATA_LVL_MASK);
1825}
1826
069c9f14 1827static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
b513ea25 1828{
4b6f37d3 1829 struct sdhci_host *host = mmc_priv(mmc);
b513ea25 1830 u16 ctrl;
b513ea25 1831 int tuning_loop_counter = MAX_TUNING_LOOP;
b513ea25 1832 int err = 0;
2b35bd83 1833 unsigned long flags;
b513ea25 1834
66fd8ad5 1835 sdhci_runtime_pm_get(host);
2b35bd83 1836 spin_lock_irqsave(&host->lock, flags);
b513ea25 1837
b513ea25 1838 /*
069c9f14
G		 1839 * The Host Controller needs tuning only in case of SDR104 mode
1840 * and for SDR50 mode when Use Tuning for SDR50 is set in the
b513ea25 1841 * Capabilities register.
069c9f14
G		 1842 * If the Host Controller supports the HS200 mode then the
1843 * tuning function has to be executed.
b513ea25 1844 */
4b6f37d3
RK		 1845 switch (host->timing) {
1846 case MMC_TIMING_MMC_HS200:
1847 case MMC_TIMING_UHS_SDR104:
1848 break;
1849
1850 case MMC_TIMING_UHS_SDR50:
1851 if (host->flags & SDHCI_SDR50_NEEDS_TUNING ||
1852 host->flags & SDHCI_SDR104_NEEDS_TUNING)
1853 break;
1854 /* FALLTHROUGH */
1855
1856 default:
2b35bd83 1857 spin_unlock_irqrestore(&host->lock, flags);
66fd8ad5 1858 sdhci_runtime_pm_put(host);
b513ea25
AN		 1859 return 0;
1860 }
1861
45251812 1862 if (host->ops->platform_execute_tuning) {
2b35bd83 1863 spin_unlock_irqrestore(&host->lock, flags);
45251812
DA		 1864 err = host->ops->platform_execute_tuning(host, opcode);
1865 sdhci_runtime_pm_put(host);
1866 return err;
1867 }
1868
4b6f37d3
RK		 1869 ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
1870 ctrl |= SDHCI_CTRL_EXEC_TUNING;
b513ea25
AN		 1871 sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
1872
1873 /*
1874 * As per the Host Controller spec v3.00, tuning command
1875 * generates Buffer Read Ready interrupt, so enable that.
1876 *
1877 * Note: The spec clearly says that when tuning sequence
1878 * is being performed, the controller does not generate
1879 * interrupts other than Buffer Read Ready interrupt. But
1880 * to make sure we don't hit a controller bug, we _only_
1881 * enable Buffer Read Ready interrupt here.
1882 */
b537f94c
RK		 1883 sdhci_writel(host, SDHCI_INT_DATA_AVAIL, SDHCI_INT_ENABLE);
1884 sdhci_writel(host, SDHCI_INT_DATA_AVAIL, SDHCI_SIGNAL_ENABLE);
b513ea25
AN		 1885
1886 /*
1887 * Issue CMD19 repeatedly till Execute Tuning is set to 0 or the number
1888 * of loops reaches 40 times or a timeout of 150ms occurs.
1889 */
b513ea25
AN		 1890 do {
1891 struct mmc_command cmd = {0};
66fd8ad5 1892 struct mmc_request mrq = {NULL};
b513ea25 1893
069c9f14 1894 cmd.opcode = opcode;
b513ea25
AN		 1895 cmd.arg = 0;
1896 cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
1897 cmd.retries = 0;
1898 cmd.data = NULL;
1899 cmd.error = 0;
1900
7ce45e95
AC		 1901 if (tuning_loop_counter-- == 0)
1902 break;
1903
b513ea25
AN		 1904 mrq.cmd = &cmd;
1905 host->mrq = &mrq;
1906
1907 /*
1908 * In response to CMD19, the card sends 64 bytes of tuning
1909 * block to the Host Controller. So we set the block size
1910 * to 64 here.
1911 */
069c9f14
G		 1912 if (cmd.opcode == MMC_SEND_TUNING_BLOCK_HS200) {
1913 if (mmc->ios.bus_width == MMC_BUS_WIDTH_8)
1914 sdhci_writew(host, SDHCI_MAKE_BLKSZ(7, 128),
1915 SDHCI_BLOCK_SIZE);
1916 else if (mmc->ios.bus_width == MMC_BUS_WIDTH_4)
1917 sdhci_writew(host, SDHCI_MAKE_BLKSZ(7, 64),
1918 SDHCI_BLOCK_SIZE);
1919 } else {
1920 sdhci_writew(host, SDHCI_MAKE_BLKSZ(7, 64),
1921 SDHCI_BLOCK_SIZE);
1922 }
b513ea25
AN		 1923
1924 /*
1925 * The tuning block is sent by the card to the host controller.
1926 * So we set the TRNS_READ bit in the Transfer Mode register.
1927 * This also takes care of setting DMA Enable and Multi Block
1928 * Select in the same register to 0.
1929 */
1930 sdhci_writew(host, SDHCI_TRNS_READ, SDHCI_TRANSFER_MODE);
1931
1932 sdhci_send_command(host, &cmd);
1933
1934 host->cmd = NULL;
1935 host->mrq = NULL;
1936
2b35bd83 1937 spin_unlock_irqrestore(&host->lock, flags);
b513ea25
AN		 1938 /* Wait for Buffer Read Ready interrupt */
1939 wait_event_interruptible_timeout(host->buf_ready_int,
1940 (host->tuning_done == 1),
1941 msecs_to_jiffies(50));
2b35bd83 1942 spin_lock_irqsave(&host->lock, flags);
b513ea25
AN		 1943
1944 if (!host->tuning_done) {
a3c76eb9 1945 pr_info(DRIVER_NAME ": Timeout waiting for "
b513ea25
AN		 1946 "Buffer Read Ready interrupt during tuning "
1947 "procedure, falling back to fixed sampling "
1948 "clock\n");
1949 ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
1950 ctrl &= ~SDHCI_CTRL_TUNED_CLK;
1951 ctrl &= ~SDHCI_CTRL_EXEC_TUNING;
1952 sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
1953
1954 err = -EIO;
1955 goto out;
1956 }
1957
1958 host->tuning_done = 0;
1959
1960 ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
197160d5
NS		 1961
1962 /* eMMC spec does not require a delay between tuning cycles */
1963 if (opcode == MMC_SEND_TUNING_BLOCK)
1964 mdelay(1);
b513ea25
AN		 1965 } while (ctrl & SDHCI_CTRL_EXEC_TUNING);
1966
1967 /*
1968 * The Host Driver has exhausted the maximum number of loops allowed,
1969 * so use fixed sampling frequency.
1970 */
7ce45e95 1971 if (tuning_loop_counter < 0) {
b513ea25
AN		 1972 ctrl &= ~SDHCI_CTRL_TUNED_CLK;
1973 sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
7ce45e95
AC		 1974 }
1975 if (!(ctrl & SDHCI_CTRL_TUNED_CLK)) {
1976 pr_info(DRIVER_NAME ": Tuning procedure"
1977 " failed, falling back to fixed sampling"
1978 " clock\n");
114f2bf6 1979 err = -EIO;
b513ea25
AN		 1980 }
1981
1982out:
cf2b5eea
AN		 1983 /*
1984 * If this is the very first time we are here, we start the retuning
1985 * timer. Since only during the first time, SDHCI_NEEDS_RETUNING
1986 * flag won't be set, we check this condition before actually starting
1987 * the timer.
1988 */
1989 if (!(host->flags & SDHCI_NEEDS_RETUNING) && host->tuning_count &&
1990 (host->tuning_mode == SDHCI_TUNING_MODE_1)) {
973905fe 1991 host->flags |= SDHCI_USING_RETUNING_TIMER;
cf2b5eea
AN		 1992 mod_timer(&host->tuning_timer, jiffies +
1993 host->tuning_count * HZ);
1994 /* Tuning mode 1 limits the maximum data length to 4MB */
1995 mmc->max_blk_count = (4 * 1024 * 1024) / mmc->max_blk_size;
2bc02485 1996 } else if (host->flags & SDHCI_USING_RETUNING_TIMER) {
cf2b5eea
AN		 1997 host->flags &= ~SDHCI_NEEDS_RETUNING;
1998 /* Reload the new initial value for timer */
2bc02485
AS		 1999 mod_timer(&host->tuning_timer, jiffies +
2000 host->tuning_count * HZ);
cf2b5eea
AN		 2001 }
2002
2003 /*
2004 * In case tuning fails, host controllers which support re-tuning can
2005 * try tuning again at a later time, when the re-tuning timer expires.
2006 * So for these controllers, we return 0. Since there might be other
2007 * controllers who do not have this capability, we return error for
973905fe
AL		 2008 * them. SDHCI_USING_RETUNING_TIMER means the host is currently using
2009 * a retuning timer to do the retuning for the card.
cf2b5eea 2010 */
973905fe 2011 if (err && (host->flags & SDHCI_USING_RETUNING_TIMER))
cf2b5eea
AN		 2012 err = 0;
2013
b537f94c
RK		 2014 sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
2015 sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
2b35bd83 2016 spin_unlock_irqrestore(&host->lock, flags);
66fd8ad5 2017 sdhci_runtime_pm_put(host);
b513ea25
AN		 2018
2019 return err;
2020}
2021
52983382
KL		 2022
2023static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable)
4d55c5a1 2024{
4d55c5a1
AN		 2025 /* Host Controller v3.00 defines preset value registers */
2026 if (host->version < SDHCI_SPEC_300)
2027 return;
2028
4d55c5a1
AN		 2029 /*
2030 * We only enable or disable Preset Value if they are not already
2031 * enabled or disabled respectively. Otherwise, we bail out.
2032 */
da91a8f9
RK		 2033 if (host->preset_enabled != enable) {
2034 u16 ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
2035
2036 if (enable)
2037 ctrl |= SDHCI_CTRL_PRESET_VAL_ENABLE;
2038 else
2039 ctrl &= ~SDHCI_CTRL_PRESET_VAL_ENABLE;
2040
4d55c5a1 2041 sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
da91a8f9
RK		 2042
2043 if (enable)
2044 host->flags |= SDHCI_PV_ENABLED;
2045 else
2046 host->flags &= ~SDHCI_PV_ENABLED;
2047
2048 host->preset_enabled = enable;
4d55c5a1 2049 }
66fd8ad5
AH		 2050}
2051
71e69211 2052static void sdhci_card_event(struct mmc_host *mmc)
d129bceb 2053{
71e69211 2054 struct sdhci_host *host = mmc_priv(mmc);
d129bceb
PO		 2055 unsigned long flags;
2056
722e1280
CD		 2057 /* First check if client has provided their own card event */
2058 if (host->ops->card_event)
2059 host->ops->card_event(host);
2060
d129bceb
PO		 2061 spin_lock_irqsave(&host->lock, flags);
2062
66fd8ad5 2063 /* Check host->mrq first in case we are runtime suspended */
9668d765 2064 if (host->mrq && !sdhci_do_get_cd(host)) {
a3c76eb9 2065 pr_err("%s: Card removed during transfer!\n",
66fd8ad5 2066 mmc_hostname(host->mmc));
a3c76eb9 2067 pr_err("%s: Resetting controller.\n",
66fd8ad5 2068 mmc_hostname(host->mmc));
d129bceb 2069
03231f9b
RK		 2070 sdhci_do_reset(host, SDHCI_RESET_CMD);
2071 sdhci_do_reset(host, SDHCI_RESET_DATA);
d129bceb 2072
66fd8ad5
AH		 2073 host->mrq->cmd->error = -ENOMEDIUM;
2074 tasklet_schedule(&host->finish_tasklet);
d129bceb
PO		 2075 }
2076
2077 spin_unlock_irqrestore(&host->lock, flags);
71e69211
GL		 2078}
2079
2080static const struct mmc_host_ops sdhci_ops = {
2081 .request = sdhci_request,
2082 .set_ios = sdhci_set_ios,
94144a46 2083 .get_cd = sdhci_get_cd,
71e69211
GL		 2084 .get_ro = sdhci_get_ro,
2085 .hw_reset = sdhci_hw_reset,
2086 .enable_sdio_irq = sdhci_enable_sdio_irq,
2087 .start_signal_voltage_switch = sdhci_start_signal_voltage_switch,
2088 .execute_tuning = sdhci_execute_tuning,
71e69211 2089 .card_event = sdhci_card_event,
20b92a30 2090 .card_busy = sdhci_card_busy,
71e69211
GL		 2091};
2092
2093/*****************************************************************************\
2094 * *
2095 * Tasklets *
2096 * *
2097\*****************************************************************************/
2098
d129bceb
PO		 2099static void sdhci_tasklet_finish(unsigned long param)
2100{
2101 struct sdhci_host *host;
2102 unsigned long flags;
2103 struct mmc_request *mrq;
2104
2105 host = (struct sdhci_host*)param;
2106
66fd8ad5
AH		 2107 spin_lock_irqsave(&host->lock, flags);
2108
0c9c99a7
CB		 2109 /*
2110 * If this tasklet gets rescheduled while running, it will
2111 * be run again afterwards but without any active request.
2112 */
66fd8ad5
AH		 2113 if (!host->mrq) {
2114 spin_unlock_irqrestore(&host->lock, flags);
0c9c99a7 2115 return;
66fd8ad5 2116 }
d129bceb
PO		 2117
2118 del_timer(&host->timer);
2119
2120 mrq = host->mrq;
2121
d129bceb
PO		 2122 /*
2123 * The controller needs a reset of internal state machines
2124 * upon error conditions.
2125 */
1e72859e 2126 if (!(host->flags & SDHCI_DEVICE_DEAD) &&
b7b4d342 2127 ((mrq->cmd && mrq->cmd->error) ||
1e72859e
PO		 2128 (mrq->data && (mrq->data->error ||
2129 (mrq->data->stop && mrq->data->stop->error))) ||
2130 (host->quirks & SDHCI_QUIRK_RESET_AFTER_REQUEST))) {
645289dc
PO		 2131
2132 /* Some controllers need this kick or reset won't work here */
8213af3b 2133 if (host->quirks & SDHCI_QUIRK_CLOCK_BEFORE_RESET)
645289dc 2134 /* This is to force an update */
1771059c 2135 host->ops->set_clock(host, host->clock);
645289dc
PO		 2136
2137 /* Spec says we should do both at the same time, but Ricoh
2138 controllers do not like that. */
03231f9b
RK		 2139 sdhci_do_reset(host, SDHCI_RESET_CMD);
2140 sdhci_do_reset(host, SDHCI_RESET_DATA);
d129bceb
PO		 2141 }
2142
2143 host->mrq = NULL;
2144 host->cmd = NULL;
2145 host->data = NULL;
2146
f9134319 2147#ifndef SDHCI_USE_LEDS_CLASS
d129bceb 2148 sdhci_deactivate_led(host);
2f730fec 2149#endif
d129bceb 2150
5f25a66f 2151 mmiowb();
d129bceb
PO		 2152 spin_unlock_irqrestore(&host->lock, flags);
2153
2154 mmc_request_done(host->mmc, mrq);
66fd8ad5 2155 sdhci_runtime_pm_put(host);
d129bceb
PO		 2156}
2157
2158static void sdhci_timeout_timer(unsigned long data)
2159{
2160 struct sdhci_host *host;
2161 unsigned long flags;
2162
2163 host = (struct sdhci_host*)data;
2164
2165 spin_lock_irqsave(&host->lock, flags);
2166
2167 if (host->mrq) {
a3c76eb9 2168 pr_err("%s: Timeout waiting for hardware "
acf1da45 2169 "interrupt.\n", mmc_hostname(host->mmc));
d129bceb
PO		 2170 sdhci_dumpregs(host);
2171
2172 if (host->data) {
17b0429d 2173 host->data->error = -ETIMEDOUT;
d129bceb
PO		 2174 sdhci_finish_data(host);
2175 } else {
2176 if (host->cmd)
17b0429d 2177 host->cmd->error = -ETIMEDOUT;
d129bceb 2178 else
17b0429d 2179 host->mrq->cmd->error = -ETIMEDOUT;
d129bceb
PO		 2180
2181 tasklet_schedule(&host->finish_tasklet);
2182 }
2183 }
2184
5f25a66f 2185 mmiowb();
d129bceb
PO		 2186 spin_unlock_irqrestore(&host->lock, flags);
2187}
2188
cf2b5eea
AN		 2189static void sdhci_tuning_timer(unsigned long data)
2190{
2191 struct sdhci_host *host;
2192 unsigned long flags;
2193
2194 host = (struct sdhci_host *)data;
2195
2196 spin_lock_irqsave(&host->lock, flags);
2197
2198 host->flags |= SDHCI_NEEDS_RETUNING;
2199
2200 spin_unlock_irqrestore(&host->lock, flags);
2201}
2202
d129bceb
PO		 2203/*****************************************************************************\
2204 * *
2205 * Interrupt handling *
2206 * *
2207\*****************************************************************************/
2208
2209static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask)
2210{
2211 BUG_ON(intmask == 0);
2212
2213 if (!host->cmd) {
a3c76eb9 2214 pr_err("%s: Got command interrupt 0x%08x even "
b67ac3f3
PO		 2215 "though no command operation was in progress.\n",
2216 mmc_hostname(host->mmc), (unsigned)intmask);
d129bceb
PO		 2217 sdhci_dumpregs(host);
2218 return;
2219 }
2220
43b58b36 2221 if (intmask & SDHCI_INT_TIMEOUT)
17b0429d
PO		 2222 host->cmd->error = -ETIMEDOUT;
2223 else if (intmask & (SDHCI_INT_CRC | SDHCI_INT_END_BIT |
2224 SDHCI_INT_INDEX))
2225 host->cmd->error = -EILSEQ;
43b58b36 2226
e809517f 2227 if (host->cmd->error) {
d129bceb 2228 tasklet_schedule(&host->finish_tasklet);
e809517f
PO		 2229 return;
2230 }
2231
2232 /*
2233 * The host can send and interrupt when the busy state has
2234 * ended, allowing us to wait without wasting CPU cycles.
2235 * Unfortunately this is overloaded on the "data complete"
2236 * interrupt, so we need to take some care when handling
2237 * it.
2238 *
2239 * Note: The 1.0 specification is a bit ambiguous about this
2240 * feature so there might be some problems with older
2241 * controllers.
2242 */
2243 if (host->cmd->flags & MMC_RSP_BUSY) {
2244 if (host->cmd->data)
2245 DBG("Cannot wait for busy signal when also "
2246 "doing a data transfer");
f945405c 2247 else if (!(host->quirks & SDHCI_QUIRK_NO_BUSY_IRQ))
e809517f 2248 return;
f945405c
BD		 2249
2250 /* The controller does not support the end-of-busy IRQ,
2251 * fall through and take the SDHCI_INT_RESPONSE */
e809517f
PO		 2252 }
2253
2254 if (intmask & SDHCI_INT_RESPONSE)
43b58b36 2255 sdhci_finish_command(host);
d129bceb
PO		 2256}
2257
0957c333 2258#ifdef CONFIG_MMC_DEBUG
6882a8c0
BD		 2259static void sdhci_show_adma_error(struct sdhci_host *host)
2260{
2261 const char *name = mmc_hostname(host->mmc);
2262 u8 *desc = host->adma_desc;
2263 __le32 *dma;
2264 __le16 *len;
2265 u8 attr;
2266
2267 sdhci_dumpregs(host);
2268
2269 while (true) {
2270 dma = (__le32 *)(desc + 4);
2271 len = (__le16 *)(desc + 2);
2272 attr = *desc;
2273
2274 DBG("%s: %p: DMA 0x%08x, LEN 0x%04x, Attr=0x%02x\n",
2275 name, desc, le32_to_cpu(*dma), le16_to_cpu(*len), attr);
2276
2277 desc += 8;
2278
2279 if (attr & 2)
2280 break;
2281 }
2282}
2283#else
2284static void sdhci_show_adma_error(struct sdhci_host *host) { }
2285#endif
2286
d129bceb
PO		 2287static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
2288{
069c9f14 2289 u32 command;
d129bceb
PO		 2290 BUG_ON(intmask == 0);
2291
b513ea25
AN		 2292 /* CMD19 generates _only_ Buffer Read Ready interrupt */
2293 if (intmask & SDHCI_INT_DATA_AVAIL) {
069c9f14
G		 2294 command = SDHCI_GET_CMD(sdhci_readw(host, SDHCI_COMMAND));
2295 if (command == MMC_SEND_TUNING_BLOCK ||
2296 command == MMC_SEND_TUNING_BLOCK_HS200) {
b513ea25
AN		 2297 host->tuning_done = 1;
2298 wake_up(&host->buf_ready_int);
2299 return;
2300 }
2301 }
2302
d129bceb
PO		 2303 if (!host->data) {
2304 /*
e809517f
PO		 2305 * The "data complete" interrupt is also used to
2306 * indicate that a busy state has ended. See comment
2307 * above in sdhci_cmd_irq().
d129bceb 2308 */
e809517f
PO		 2309 if (host->cmd && (host->cmd->flags & MMC_RSP_BUSY)) {
2310 if (intmask & SDHCI_INT_DATA_END) {
2311 sdhci_finish_command(host);
2312 return;
2313 }
2314 }
d129bceb 2315
a3c76eb9 2316 pr_err("%s: Got data interrupt 0x%08x even "
b67ac3f3
PO		 2317 "though no data operation was in progress.\n",
2318 mmc_hostname(host->mmc), (unsigned)intmask);
d129bceb
PO		 2319 sdhci_dumpregs(host);
2320
2321 return;
2322 }
2323
2324 if (intmask & SDHCI_INT_DATA_TIMEOUT)
17b0429d 2325 host->data->error = -ETIMEDOUT;
22113efd
AL		 2326 else if (intmask & SDHCI_INT_DATA_END_BIT)
2327 host->data->error = -EILSEQ;
2328 else if ((intmask & SDHCI_INT_DATA_CRC) &&
2329 SDHCI_GET_CMD(sdhci_readw(host, SDHCI_COMMAND))
2330 != MMC_BUS_TEST_R)
17b0429d 2331 host->data->error = -EILSEQ;
6882a8c0 2332 else if (intmask & SDHCI_INT_ADMA_ERROR) {
a3c76eb9 2333 pr_err("%s: ADMA error\n", mmc_hostname(host->mmc));
6882a8c0 2334 sdhci_show_adma_error(host);
2134a922 2335 host->data->error = -EIO;
a4071fbb
HZ		 2336 if (host->ops->adma_workaround)
2337 host->ops->adma_workaround(host, intmask);
6882a8c0 2338 }
d129bceb 2339
17b0429d 2340 if (host->data->error)
d129bceb
PO		 2341 sdhci_finish_data(host);
2342 else {
a406f5a3 2343 if (intmask & (SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL))
d129bceb
PO		 2344 sdhci_transfer_pio(host);
2345
6ba736a1
PO		 2346 /*
2347 * We currently don't do anything fancy with DMA
2348 * boundaries, but as we can't disable the feature
2349 * we need to at least restart the transfer.
f6a03cbf
MV		 2350 *
2351 * According to the spec sdhci_readl(host, SDHCI_DMA_ADDRESS)
2352 * should return a valid address to continue from, but as
2353 * some controllers are faulty, don't trust them.
6ba736a1 2354 */
f6a03cbf
MV		 2355 if (intmask & SDHCI_INT_DMA_END) {
2356 u32 dmastart, dmanow;
2357 dmastart = sg_dma_address(host->data->sg);
2358 dmanow = dmastart + host->data->bytes_xfered;
2359 /*
2360 * Force update to the next DMA block boundary.
2361 */
2362 dmanow = (dmanow &
2363 ~(SDHCI_DEFAULT_BOUNDARY_SIZE - 1)) +
2364 SDHCI_DEFAULT_BOUNDARY_SIZE;
2365 host->data->bytes_xfered = dmanow - dmastart;
2366 DBG("%s: DMA base 0x%08x, transferred 0x%06x bytes,"
2367 " next 0x%08x\n",
2368 mmc_hostname(host->mmc), dmastart,
2369 host->data->bytes_xfered, dmanow);
2370 sdhci_writel(host, dmanow, SDHCI_DMA_ADDRESS);
2371 }
6ba736a1 2372
e538fbe8
PO		 2373 if (intmask & SDHCI_INT_DATA_END) {
2374 if (host->cmd) {
2375 /*
2376 * Data managed to finish before the
2377 * command completed. Make sure we do
2378 * things in the proper order.
2379 */
2380 host->data_early = 1;
2381 } else {
2382 sdhci_finish_data(host);
2383 }
2384 }
d129bceb
PO		 2385 }
2386}
2387
7d12e780 2388static irqreturn_t sdhci_irq(int irq, void *dev_id)
d129bceb 2389{
781e989c 2390 irqreturn_t result = IRQ_NONE;
66fd8ad5 2391 struct sdhci_host *host = dev_id;
41005003 2392 u32 intmask, mask, unexpected = 0;
781e989c 2393 int max_loops = 16;
d129bceb
PO		 2394
2395 spin_lock(&host->lock);
2396
be138554 2397 if (host->runtime_suspended && !sdhci_sdio_irq_enabled(host)) {
66fd8ad5 2398 spin_unlock(&host->lock);
655bca76 2399 return IRQ_NONE;
66fd8ad5
AH		 2400 }
2401
4e4141a5 2402 intmask = sdhci_readl(host, SDHCI_INT_STATUS);
62df67a5 2403 if (!intmask || intmask == 0xffffffff) {
d129bceb
PO		 2404 result = IRQ_NONE;
2405 goto out;
2406 }
2407
41005003
RK		 2408 do {
2409 /* Clear selected interrupts. */
2410 mask = intmask & (SDHCI_INT_CMD_MASK | SDHCI_INT_DATA_MASK |
2411 SDHCI_INT_BUS_POWER);
2412 sdhci_writel(host, mask, SDHCI_INT_STATUS);
d129bceb 2413
41005003
RK		 2414 DBG("*** %s got interrupt: 0x%08x\n",
2415 mmc_hostname(host->mmc), intmask);
d129bceb 2416
41005003
RK		 2417 if (intmask & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE)) {
2418 u32 present = sdhci_readl(host, SDHCI_PRESENT_STATE) &
2419 SDHCI_CARD_PRESENT;
d129bceb 2420
41005003
RK		 2421 /*
2422 * There is a observation on i.mx esdhc. INSERT
2423 * bit will be immediately set again when it gets
2424 * cleared, if a card is inserted. We have to mask
2425 * the irq to prevent interrupt storm which will
2426 * freeze the system. And the REMOVE gets the
2427 * same situation.
2428 *
2429 * More testing are needed here to ensure it works
2430 * for other platforms though.
2431 */
b537f94c
RK		 2432 host->ier &= ~(SDHCI_INT_CARD_INSERT |
2433 SDHCI_INT_CARD_REMOVE);
2434 host->ier |= present ? SDHCI_INT_CARD_REMOVE :
2435 SDHCI_INT_CARD_INSERT;
2436 sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
2437 sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
41005003
RK		 2438
2439 sdhci_writel(host, intmask & (SDHCI_INT_CARD_INSERT |
2440 SDHCI_INT_CARD_REMOVE), SDHCI_INT_STATUS);
3560db8e
RK		 2441
2442 host->thread_isr |= intmask & (SDHCI_INT_CARD_INSERT |
2443 SDHCI_INT_CARD_REMOVE);
2444 result = IRQ_WAKE_THREAD;
41005003 2445 }
d129bceb 2446
41005003
RK		 2447 if (intmask & SDHCI_INT_CMD_MASK)
2448 sdhci_cmd_irq(host, intmask & SDHCI_INT_CMD_MASK);
964f9ce2 2449
41005003
RK		 2450 if (intmask & SDHCI_INT_DATA_MASK)
2451 sdhci_data_irq(host, intmask & SDHCI_INT_DATA_MASK);
d129bceb 2452
41005003
RK		 2453 if (intmask & SDHCI_INT_BUS_POWER)
2454 pr_err("%s: Card is consuming too much power!\n",
2455 mmc_hostname(host->mmc));
3192a28f 2456
781e989c
RK		 2457 if (intmask & SDHCI_INT_CARD_INT) {
2458 sdhci_enable_sdio_irq_nolock(host, false);
2459 host->thread_isr |= SDHCI_INT_CARD_INT;
2460 result = IRQ_WAKE_THREAD;
2461 }
f75979b7 2462
41005003
RK		 2463 intmask &= ~(SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE |
2464 SDHCI_INT_CMD_MASK | SDHCI_INT_DATA_MASK |
2465 SDHCI_INT_ERROR | SDHCI_INT_BUS_POWER |
2466 SDHCI_INT_CARD_INT);
f75979b7 2467
41005003
RK		 2468 if (intmask) {
2469 unexpected |= intmask;
2470 sdhci_writel(host, intmask, SDHCI_INT_STATUS);
2471 }
d129bceb 2472
781e989c
RK		 2473 if (result == IRQ_NONE)
2474 result = IRQ_HANDLED;
d129bceb 2475
41005003 2476 intmask = sdhci_readl(host, SDHCI_INT_STATUS);
41005003 2477 } while (intmask && --max_loops);
d129bceb
PO		 2478out:
2479 spin_unlock(&host->lock);
2480
6379b237
AS		 2481 if (unexpected) {
2482 pr_err("%s: Unexpected interrupt 0x%08x.\n",
2483 mmc_hostname(host->mmc), unexpected);
2484 sdhci_dumpregs(host);
2485 }
f75979b7 2486
d129bceb
PO		 2487 return result;
2488}
2489
781e989c
RK		 2490static irqreturn_t sdhci_thread_irq(int irq, void *dev_id)
2491{
2492 struct sdhci_host *host = dev_id;
2493 unsigned long flags;
2494 u32 isr;
2495
2496 spin_lock_irqsave(&host->lock, flags);
2497 isr = host->thread_isr;
2498 host->thread_isr = 0;
2499 spin_unlock_irqrestore(&host->lock, flags);
2500
3560db8e
RK		 2501 if (isr & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE)) {
2502 sdhci_card_event(host->mmc);
2503 mmc_detect_change(host->mmc, msecs_to_jiffies(200));
2504 }
2505
781e989c
RK		 2506 if (isr & SDHCI_INT_CARD_INT) {
2507 sdio_run_irqs(host->mmc);
2508
2509 spin_lock_irqsave(&host->lock, flags);
2510 if (host->flags & SDHCI_SDIO_IRQ_ENABLED)
2511 sdhci_enable_sdio_irq_nolock(host, true);
2512 spin_unlock_irqrestore(&host->lock, flags);
2513 }
2514
2515 return isr ? IRQ_HANDLED : IRQ_NONE;
2516}
2517
d129bceb
PO		 2518/*****************************************************************************\
2519 * *
2520 * Suspend/resume *
2521 * *
2522\*****************************************************************************/
2523
2524#ifdef CONFIG_PM
ad080d79
KL		 2525void sdhci_enable_irq_wakeups(struct sdhci_host *host)
2526{
2527 u8 val;
2528 u8 mask = SDHCI_WAKE_ON_INSERT | SDHCI_WAKE_ON_REMOVE
2529 | SDHCI_WAKE_ON_INT;
2530
2531 val = sdhci_readb(host, SDHCI_WAKE_UP_CONTROL);
2532 val |= mask ;
2533 /* Avoid fake wake up */
2534 if (host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION)
2535 val &= ~(SDHCI_WAKE_ON_INSERT | SDHCI_WAKE_ON_REMOVE);
2536 sdhci_writeb(host, val, SDHCI_WAKE_UP_CONTROL);
2537}
2538EXPORT_SYMBOL_GPL(sdhci_enable_irq_wakeups);
2539
2540void sdhci_disable_irq_wakeups(struct sdhci_host *host)
2541{
2542 u8 val;
2543 u8 mask = SDHCI_WAKE_ON_INSERT | SDHCI_WAKE_ON_REMOVE
2544 | SDHCI_WAKE_ON_INT;
2545
2546 val = sdhci_readb(host, SDHCI_WAKE_UP_CONTROL);
2547 val &= ~mask;
2548 sdhci_writeb(host, val, SDHCI_WAKE_UP_CONTROL);
2549}
2550EXPORT_SYMBOL_GPL(sdhci_disable_irq_wakeups);
d129bceb 2551
29495aa0 2552int sdhci_suspend_host(struct sdhci_host *host)
d129bceb 2553{
7260cf5e
AV		 2554 sdhci_disable_card_detection(host);
2555
cf2b5eea 2556 /* Disable tuning since we are suspending */
973905fe 2557 if (host->flags & SDHCI_USING_RETUNING_TIMER) {
c6ced0db 2558 del_timer_sync(&host->tuning_timer);
cf2b5eea 2559 host->flags &= ~SDHCI_NEEDS_RETUNING;
cf2b5eea
AN		 2560 }
2561
ad080d79 2562 if (!device_may_wakeup(mmc_dev(host->mmc))) {
b537f94c
RK		 2563 host->ier = 0;
2564 sdhci_writel(host, 0, SDHCI_INT_ENABLE);
2565 sdhci_writel(host, 0, SDHCI_SIGNAL_ENABLE);
ad080d79
KL		 2566 free_irq(host->irq, host);
2567 } else {
2568 sdhci_enable_irq_wakeups(host);
2569 enable_irq_wake(host->irq);
2570 }
4ee14ec6 2571 return 0;
d129bceb
PO		 2572}
2573
b8c86fc5 2574EXPORT_SYMBOL_GPL(sdhci_suspend_host);
d129bceb 2575
b8c86fc5
PO		 2576int sdhci_resume_host(struct sdhci_host *host)
2577{
4ee14ec6 2578 int ret = 0;
d129bceb 2579
a13abc7b 2580 if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
b8c86fc5
PO		 2581 if (host->ops->enable_dma)
2582 host->ops->enable_dma(host);
2583 }
d129bceb 2584
ad080d79 2585 if (!device_may_wakeup(mmc_dev(host->mmc))) {
781e989c
RK		 2586 ret = request_threaded_irq(host->irq, sdhci_irq,
2587 sdhci_thread_irq, IRQF_SHARED,
2588 mmc_hostname(host->mmc), host);
ad080d79
KL		 2589 if (ret)
2590 return ret;
2591 } else {
2592 sdhci_disable_irq_wakeups(host);
2593 disable_irq_wake(host->irq);
2594 }
d129bceb 2595
6308d290
AH		 2596 if ((host->mmc->pm_flags & MMC_PM_KEEP_POWER) &&
2597 (host->quirks2 & SDHCI_QUIRK2_HOST_OFF_CARD_ON)) {
2598 /* Card keeps power but host controller does not */
2599 sdhci_init(host, 0);
2600 host->pwr = 0;
2601 host->clock = 0;
2602 sdhci_do_set_ios(host, &host->mmc->ios);
2603 } else {
2604 sdhci_init(host, (host->mmc->pm_flags & MMC_PM_KEEP_POWER));
2605 mmiowb();
2606 }
b8c86fc5 2607
7260cf5e
AV		 2608 sdhci_enable_card_detection(host);
2609
cf2b5eea 2610 /* Set the re-tuning expiration flag */
973905fe 2611 if (host->flags & SDHCI_USING_RETUNING_TIMER)
cf2b5eea
AN		 2612 host->flags |= SDHCI_NEEDS_RETUNING;
2613
2f4cbb3d 2614 return ret;
d129bceb
PO		 2615}
2616
b8c86fc5 2617EXPORT_SYMBOL_GPL(sdhci_resume_host);
d129bceb
PO		 2618#endif /* CONFIG_PM */
2619
66fd8ad5
AH		 2620#ifdef CONFIG_PM_RUNTIME
2621
2622static int sdhci_runtime_pm_get(struct sdhci_host *host)
2623{
2624 return pm_runtime_get_sync(host->mmc->parent);
2625}
2626
2627static int sdhci_runtime_pm_put(struct sdhci_host *host)
2628{
2629 pm_runtime_mark_last_busy(host->mmc->parent);
2630 return pm_runtime_put_autosuspend(host->mmc->parent);
2631}
2632
f0710a55
AH		 2633static void sdhci_runtime_pm_bus_on(struct sdhci_host *host)
2634{
2635 if (host->runtime_suspended || host->bus_on)
2636 return;
2637 host->bus_on = true;
2638 pm_runtime_get_noresume(host->mmc->parent);
2639}
2640
2641static void sdhci_runtime_pm_bus_off(struct sdhci_host *host)
2642{
2643 if (host->runtime_suspended || !host->bus_on)
2644 return;
2645 host->bus_on = false;
2646 pm_runtime_put_noidle(host->mmc->parent);
2647}
2648
66fd8ad5
AH		 2649int sdhci_runtime_suspend_host(struct sdhci_host *host)
2650{
2651 unsigned long flags;
2652 int ret = 0;
2653
2654 /* Disable tuning since we are suspending */
973905fe 2655 if (host->flags & SDHCI_USING_RETUNING_TIMER) {
66fd8ad5
AH		 2656 del_timer_sync(&host->tuning_timer);
2657 host->flags &= ~SDHCI_NEEDS_RETUNING;
2658 }
2659
2660 spin_lock_irqsave(&host->lock, flags);
b537f94c
RK		 2661 host->ier &= SDHCI_INT_CARD_INT;
2662 sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
2663 sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
66fd8ad5
AH		 2664 spin_unlock_irqrestore(&host->lock, flags);
2665
781e989c 2666 synchronize_hardirq(host->irq);
66fd8ad5
AH		 2667
2668 spin_lock_irqsave(&host->lock, flags);
2669 host->runtime_suspended = true;
2670 spin_unlock_irqrestore(&host->lock, flags);
2671
2672 return ret;
2673}
2674EXPORT_SYMBOL_GPL(sdhci_runtime_suspend_host);
2675
2676int sdhci_runtime_resume_host(struct sdhci_host *host)
2677{
2678 unsigned long flags;
2679 int ret = 0, host_flags = host->flags;
2680
2681 if (host_flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
2682 if (host->ops->enable_dma)
2683 host->ops->enable_dma(host);
2684 }
2685
2686 sdhci_init(host, 0);
2687
2688 /* Force clock and power re-program */
2689 host->pwr = 0;
2690 host->clock = 0;
2691 sdhci_do_set_ios(host, &host->mmc->ios);
2692
2693 sdhci_do_start_signal_voltage_switch(host, &host->mmc->ios);
52983382
KL		 2694 if ((host_flags & SDHCI_PV_ENABLED) &&
2695 !(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN)) {
2696 spin_lock_irqsave(&host->lock, flags);
2697 sdhci_enable_preset_value(host, true);
2698 spin_unlock_irqrestore(&host->lock, flags);
2699 }
66fd8ad5
AH		 2700
2701 /* Set the re-tuning expiration flag */
973905fe 2702 if (host->flags & SDHCI_USING_RETUNING_TIMER)
66fd8ad5
AH		 2703 host->flags |= SDHCI_NEEDS_RETUNING;
2704
2705 spin_lock_irqsave(&host->lock, flags);
2706
2707 host->runtime_suspended = false;
2708
2709 /* Enable SDIO IRQ */
ef104333 2710 if (host->flags & SDHCI_SDIO_IRQ_ENABLED)
66fd8ad5
AH		 2711 sdhci_enable_sdio_irq_nolock(host, true);
2712
2713 /* Enable Card Detection */
2714 sdhci_enable_card_detection(host);
2715
2716 spin_unlock_irqrestore(&host->lock, flags);
2717
2718 return ret;
2719}
2720EXPORT_SYMBOL_GPL(sdhci_runtime_resume_host);
2721
2722#endif
2723
d129bceb
PO		 2724/*****************************************************************************\
2725 * *
b8c86fc5 2726 * Device allocation/registration *
d129bceb
PO		 2727 * *
2728\*****************************************************************************/
2729
b8c86fc5
PO		 2730struct sdhci_host *sdhci_alloc_host(struct device *dev,
2731 size_t priv_size)
d129bceb 2732{
d129bceb
PO		 2733 struct mmc_host *mmc;
2734 struct sdhci_host *host;
2735
b8c86fc5 2736 WARN_ON(dev == NULL);
d129bceb 2737
b8c86fc5 2738 mmc = mmc_alloc_host(sizeof(struct sdhci_host) + priv_size, dev);
d129bceb 2739 if (!mmc)
b8c86fc5 2740 return ERR_PTR(-ENOMEM);
d129bceb
PO		 2741
2742 host = mmc_priv(mmc);
2743 host->mmc = mmc;
2744
b8c86fc5
PO		 2745 return host;
2746}
8a4da143 2747
b8c86fc5 2748EXPORT_SYMBOL_GPL(sdhci_alloc_host);
d129bceb 2749
b8c86fc5
PO		 2750int sdhci_add_host(struct sdhci_host *host)
2751{
2752 struct mmc_host *mmc;
bd6a8c30 2753 u32 caps[2] = {0, 0};
f2119df6
AN		 2754 u32 max_current_caps;
2755 unsigned int ocr_avail;
b8c86fc5 2756 int ret;
d129bceb 2757
b8c86fc5
PO		 2758 WARN_ON(host == NULL);
2759 if (host == NULL)
2760 return -EINVAL;
d129bceb 2761
b8c86fc5 2762 mmc = host->mmc;
d129bceb 2763
b8c86fc5
PO		 2764 if (debug_quirks)
2765 host->quirks = debug_quirks;
66fd8ad5
AH		 2766 if (debug_quirks2)
2767 host->quirks2 = debug_quirks2;
d129bceb 2768
03231f9b 2769 sdhci_do_reset(host, SDHCI_RESET_ALL);
d96649ed 2770
4e4141a5 2771 host->version = sdhci_readw(host, SDHCI_HOST_VERSION);
2134a922
PO		 2772 host->version = (host->version & SDHCI_SPEC_VER_MASK)
2773 >> SDHCI_SPEC_VER_SHIFT;
85105c53 2774 if (host->version > SDHCI_SPEC_300) {
a3c76eb9 2775 pr_err("%s: Unknown controller version (%d). "
b69c9058 2776 "You may experience problems.\n", mmc_hostname(mmc),
2134a922 2777 host->version);
4a965505
PO		 2778 }
2779
f2119df6 2780 caps[0] = (host->quirks & SDHCI_QUIRK_MISSING_CAPS) ? host->caps :
ccc92c23 2781 sdhci_readl(host, SDHCI_CAPABILITIES);
d129bceb 2782
bd6a8c30
PR		 2783 if (host->version >= SDHCI_SPEC_300)
2784 caps[1] = (host->quirks & SDHCI_QUIRK_MISSING_CAPS) ?
2785 host->caps1 :
2786 sdhci_readl(host, SDHCI_CAPABILITIES_1);
f2119df6 2787
b8c86fc5 2788 if (host->quirks & SDHCI_QUIRK_FORCE_DMA)
a13abc7b 2789 host->flags |= SDHCI_USE_SDMA;
f2119df6 2790 else if (!(caps[0] & SDHCI_CAN_DO_SDMA))
a13abc7b 2791 DBG("Controller doesn't have SDMA capability\n");
67435274 2792 else
a13abc7b 2793 host->flags |= SDHCI_USE_SDMA;
d129bceb 2794
b8c86fc5 2795 if ((host->quirks & SDHCI_QUIRK_BROKEN_DMA) &&
a13abc7b 2796 (host->flags & SDHCI_USE_SDMA)) {
cee687ce 2797 DBG("Disabling DMA as it is marked broken\n");
a13abc7b 2798 host->flags &= ~SDHCI_USE_SDMA;
7c168e3d
FT		 2799 }
2800
f2119df6
AN		 2801 if ((host->version >= SDHCI_SPEC_200) &&
2802 (caps[0] & SDHCI_CAN_DO_ADMA2))
a13abc7b 2803 host->flags |= SDHCI_USE_ADMA;
2134a922
PO		 2804
2805 if ((host->quirks & SDHCI_QUIRK_BROKEN_ADMA) &&
2806 (host->flags & SDHCI_USE_ADMA)) {
2807 DBG("Disabling ADMA as it is marked broken\n");
2808 host->flags &= ~SDHCI_USE_ADMA;
2809 }
2810
a13abc7b 2811 if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
b8c86fc5
PO		 2812 if (host->ops->enable_dma) {
2813 if (host->ops->enable_dma(host)) {
a3c76eb9 2814 pr_warning("%s: No suitable DMA "
b8c86fc5
PO		 2815 "available. Falling back to PIO.\n",
2816 mmc_hostname(mmc));
a13abc7b
RR		 2817 host->flags &=
2818 ~(SDHCI_USE_SDMA | SDHCI_USE_ADMA);
b8c86fc5 2819 }
d129bceb
PO		 2820 }
2821 }
2822
2134a922
PO		 2823 if (host->flags & SDHCI_USE_ADMA) {
2824 /*
2825 * We need to allocate descriptors for all sg entries
2826 * (128) and potentially one alignment transfer for
2827 * each of those entries.
2828 */
d1e49f77
RK		 2829 host->adma_desc = dma_alloc_coherent(mmc_dev(host->mmc),
2830 ADMA_SIZE, &host->adma_addr,
2831 GFP_KERNEL);
2134a922
PO		 2832 host->align_buffer = kmalloc(128 * 4, GFP_KERNEL);
2833 if (!host->adma_desc || !host->align_buffer) {
d1e49f77
RK		 2834 dma_free_coherent(mmc_dev(host->mmc), ADMA_SIZE,
2835 host->adma_desc, host->adma_addr);
2134a922 2836 kfree(host->align_buffer);
a3c76eb9 2837 pr_warning("%s: Unable to allocate ADMA "
2134a922
PO		 2838 "buffers. Falling back to standard DMA.\n",
2839 mmc_hostname(mmc));
2840 host->flags &= ~SDHCI_USE_ADMA;
d1e49f77
RK		 2841 host->adma_desc = NULL;
2842 host->align_buffer = NULL;
2843 } else if (host->adma_addr & 3) {
2844 pr_warning("%s: unable to allocate aligned ADMA descriptor\n",
2845 mmc_hostname(mmc));
2846 host->flags &= ~SDHCI_USE_ADMA;
2847 dma_free_coherent(mmc_dev(host->mmc), ADMA_SIZE,
2848 host->adma_desc, host->adma_addr);
2849 kfree(host->align_buffer);
2850 host->adma_desc = NULL;
2851 host->align_buffer = NULL;
2134a922
PO		 2852 }
2853 }
2854
7659150c
PO		 2855 /*
2856 * If we use DMA, then it's up to the caller to set the DMA
2857 * mask, but PIO does not need the hw shim so we set a new
2858 * mask here in that case.
2859 */
a13abc7b 2860 if (!(host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA))) {
7659150c
PO		 2861 host->dma_mask = DMA_BIT_MASK(64);
2862 mmc_dev(host->mmc)->dma_mask = &host->dma_mask;
2863 }
d129bceb 2864
c4687d5f 2865 if (host->version >= SDHCI_SPEC_300)
f2119df6 2866 host->max_clk = (caps[0] & SDHCI_CLOCK_V3_BASE_MASK)
c4687d5f
ZG		 2867 >> SDHCI_CLOCK_BASE_SHIFT;
2868 else
f2119df6 2869 host->max_clk = (caps[0] & SDHCI_CLOCK_BASE_MASK)
c4687d5f
ZG		 2870 >> SDHCI_CLOCK_BASE_SHIFT;
2871
4240ff0a 2872 host->max_clk *= 1000000;
f27f47ef
AV		 2873 if (host->max_clk == 0 || host->quirks &
2874 SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN) {
4240ff0a 2875 if (!host->ops->get_max_clock) {
a3c76eb9 2876 pr_err("%s: Hardware doesn't specify base clock "
4240ff0a
BD		 2877 "frequency.\n", mmc_hostname(mmc));
2878 return -ENODEV;
2879 }
2880 host->max_clk = host->ops->get_max_clock(host);
8ef1a143 2881 }
d129bceb 2882
c3ed3877
AN		 2883 /*
2884 * In case of Host Controller v3.00, find out whether clock
2885 * multiplier is supported.
2886 */
2887 host->clk_mul = (caps[1] & SDHCI_CLOCK_MUL_MASK) >>
2888 SDHCI_CLOCK_MUL_SHIFT;
2889
2890 /*
2891 * In case the value in Clock Multiplier is 0, then programmable
2892 * clock mode is not supported, otherwise the actual clock
2893 * multiplier is one more than the value of Clock Multiplier
2894 * in the Capabilities Register.
2895 */
2896 if (host->clk_mul)
2897 host->clk_mul += 1;
2898
d129bceb
PO		 2899 /*
2900 * Set host parameters.
2901 */
2902 mmc->ops = &sdhci_ops;
c3ed3877 2903 mmc->f_max = host->max_clk;
ce5f036b 2904 if (host->ops->get_min_clock)
a9e58f25 2905 mmc->f_min = host->ops->get_min_clock(host);
c3ed3877
AN		 2906 else if (host->version >= SDHCI_SPEC_300) {
2907 if (host->clk_mul) {
2908 mmc->f_min = (host->max_clk * host->clk_mul) / 1024;
2909 mmc->f_max = host->max_clk * host->clk_mul;
2910 } else
2911 mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_300;
2912 } else
0397526d 2913 mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_200;
15ec4461 2914
272308ca
AS		 2915 host->timeout_clk =
2916 (caps[0] & SDHCI_TIMEOUT_CLK_MASK) >> SDHCI_TIMEOUT_CLK_SHIFT;
2917 if (host->timeout_clk == 0) {
2918 if (host->ops->get_timeout_clock) {
2919 host->timeout_clk = host->ops->get_timeout_clock(host);
2920 } else if (!(host->quirks &
2921 SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)) {
a3c76eb9 2922 pr_err("%s: Hardware doesn't specify timeout clock "
272308ca
AS		 2923 "frequency.\n", mmc_hostname(mmc));
2924 return -ENODEV;
2925 }
2926 }
2927 if (caps[0] & SDHCI_TIMEOUT_CLK_UNIT)
2928 host->timeout_clk *= 1000;
2929
2930 if (host->quirks & SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)
65be3fef 2931 host->timeout_clk = mmc->f_max / 1000;
272308ca 2932
68eb80e0 2933 mmc->max_busy_timeout = (1 << 27) / host->timeout_clk;
58d1246d 2934
e89d456f 2935 mmc->caps |= MMC_CAP_SDIO_IRQ | MMC_CAP_ERASE | MMC_CAP_CMD23;
781e989c 2936 mmc->caps2 |= MMC_CAP2_SDIO_IRQ_NOTHREAD;
e89d456f
AW		 2937
2938 if (host->quirks & SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12)
2939 host->flags |= SDHCI_AUTO_CMD12;
5fe23c7f 2940
8edf6371 2941 /* Auto-CMD23 stuff only works in ADMA or PIO. */
4f3d3e9b 2942 if ((host->version >= SDHCI_SPEC_300) &&
8edf6371 2943 ((host->flags & SDHCI_USE_ADMA) ||
4f3d3e9b 2944 !(host->flags & SDHCI_USE_SDMA))) {
8edf6371
AW		 2945 host->flags |= SDHCI_AUTO_CMD23;
2946 DBG("%s: Auto-CMD23 available\n", mmc_hostname(mmc));
2947 } else {
2948 DBG("%s: Auto-CMD23 unavailable\n", mmc_hostname(mmc));
2949 }
2950
15ec4461
PR		 2951 /*
2952 * A controller may support 8-bit width, but the board itself
2953 * might not have the pins brought out. Boards that support
2954 * 8-bit width must set "mmc->caps |= MMC_CAP_8_BIT_DATA;" in
2955 * their platform code before calling sdhci_add_host(), and we
2956 * won't assume 8-bit width for hosts without that CAP.
2957 */
5fe23c7f 2958 if (!(host->quirks & SDHCI_QUIRK_FORCE_1_BIT_DATA))
15ec4461 2959 mmc->caps |= MMC_CAP_4_BIT_DATA;
d129bceb 2960
63ef5d8c
JH		 2961 if (host->quirks2 & SDHCI_QUIRK2_HOST_NO_CMD23)
2962 mmc->caps &= ~MMC_CAP_CMD23;
2963
f2119df6 2964 if (caps[0] & SDHCI_CAN_DO_HISPD)
a29e7e18 2965 mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED;
cd9277c0 2966
176d1ed4 2967 if ((host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION) &&
eb6d5ae1 2968 !(host->mmc->caps & MMC_CAP_NONREMOVABLE))
68d1fb7e
AV		 2969 mmc->caps |= MMC_CAP_NEEDS_POLL;
2970
3a48edc4
TK		 2971 /* If there are external regulators, get them */
2972 if (mmc_regulator_get_supply(mmc) == -EPROBE_DEFER)
2973 return -EPROBE_DEFER;
2974
6231f3de 2975 /* If vqmmc regulator and no 1.8V signalling, then there's no UHS */
3a48edc4
TK		 2976 if (!IS_ERR(mmc->supply.vqmmc)) {
2977 ret = regulator_enable(mmc->supply.vqmmc);
2978 if (!regulator_is_supported_voltage(mmc->supply.vqmmc, 1700000,
2979 1950000))
8363c374
KL		 2980 caps[1] &= ~(SDHCI_SUPPORT_SDR104 |
2981 SDHCI_SUPPORT_SDR50 |
2982 SDHCI_SUPPORT_DDR50);
a3361aba
CB		 2983 if (ret) {
2984 pr_warn("%s: Failed to enable vqmmc regulator: %d\n",
2985 mmc_hostname(mmc), ret);
3a48edc4 2986 mmc->supply.vqmmc = NULL;
a3361aba 2987 }
8363c374 2988 }
6231f3de 2989
6a66180a
DD		 2990 if (host->quirks2 & SDHCI_QUIRK2_NO_1_8_V)
2991 caps[1] &= ~(SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_SDR50 |
2992 SDHCI_SUPPORT_DDR50);
2993
4188bba0
AC		 2994 /* Any UHS-I mode in caps implies SDR12 and SDR25 support. */
2995 if (caps[1] & (SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_SDR50 |
2996 SDHCI_SUPPORT_DDR50))
f2119df6
AN		 2997 mmc->caps |= MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25;
2998
2999 /* SDR104 supports also implies SDR50 support */
156e14b1 3000 if (caps[1] & SDHCI_SUPPORT_SDR104) {
f2119df6 3001 mmc->caps |= MMC_CAP_UHS_SDR104 | MMC_CAP_UHS_SDR50;
156e14b1
GC		 3002 /* SD3.0: SDR104 is supported so (for eMMC) the caps2
3003 * field can be promoted to support HS200.
3004 */
13868bf2
DC		 3005 if (!(host->quirks2 & SDHCI_QUIRK2_BROKEN_HS200))
3006 mmc->caps2 |= MMC_CAP2_HS200;
156e14b1 3007 } else if (caps[1] & SDHCI_SUPPORT_SDR50)
f2119df6
AN		 3008 mmc->caps |= MMC_CAP_UHS_SDR50;
3009
9107ebbf
MC		 3010 if ((caps[1] & SDHCI_SUPPORT_DDR50) &&
3011 !(host->quirks2 & SDHCI_QUIRK2_BROKEN_DDR50))
f2119df6
AN		 3012 mmc->caps |= MMC_CAP_UHS_DDR50;
3013
069c9f14 3014 /* Does the host need tuning for SDR50? */
b513ea25
AN		 3015 if (caps[1] & SDHCI_USE_SDR50_TUNING)
3016 host->flags |= SDHCI_SDR50_NEEDS_TUNING;
3017
156e14b1 3018 /* Does the host need tuning for SDR104 / HS200? */
069c9f14 3019 if (mmc->caps2 & MMC_CAP2_HS200)
156e14b1 3020 host->flags |= SDHCI_SDR104_NEEDS_TUNING;
069c9f14 3021
d6d50a15
AN		 3022 /* Driver Type(s) (A, C, D) supported by the host */
3023 if (caps[1] & SDHCI_DRIVER_TYPE_A)
3024 mmc->caps |= MMC_CAP_DRIVER_TYPE_A;
3025 if (caps[1] & SDHCI_DRIVER_TYPE_C)
3026 mmc->caps |= MMC_CAP_DRIVER_TYPE_C;
3027 if (caps[1] & SDHCI_DRIVER_TYPE_D)
3028 mmc->caps |= MMC_CAP_DRIVER_TYPE_D;
3029
cf2b5eea
AN		 3030 /* Initial value for re-tuning timer count */
3031 host->tuning_count = (caps[1] & SDHCI_RETUNING_TIMER_COUNT_MASK) >>
3032 SDHCI_RETUNING_TIMER_COUNT_SHIFT;
3033
3034 /*
3035 * In case Re-tuning Timer is not disabled, the actual value of
3036 * re-tuning timer will be 2 ^ (n - 1).
3037 */
3038 if (host->tuning_count)
3039 host->tuning_count = 1 << (host->tuning_count - 1);
3040
3041 /* Re-tuning mode supported by the Host Controller */
3042 host->tuning_mode = (caps[1] & SDHCI_RETUNING_MODE_MASK) >>
3043 SDHCI_RETUNING_MODE_SHIFT;
3044
8f230f45 3045 ocr_avail = 0;
bad37e1a 3046
f2119df6
AN		 3047 /*
3048 * According to SD Host Controller spec v3.00, if the Host System
3049 * can afford more than 150mA, Host Driver should set XPC to 1. Also
3050 * the value is meaningful only if Voltage Support in the Capabilities
3051 * register is set. The actual current value is 4 times the register
3052 * value.
3053 */
3054 max_current_caps = sdhci_readl(host, SDHCI_MAX_CURRENT);
3a48edc4
TK		 3055 if (!max_current_caps && !IS_ERR(mmc->supply.vmmc)) {
3056 u32 curr = regulator_get_current_limit(mmc->supply.vmmc);
bad37e1a
PR		 3057 if (curr > 0) {
3058
3059 /* convert to SDHCI_MAX_CURRENT format */
3060 curr = curr/1000; /* convert to mA */
3061 curr = curr/SDHCI_MAX_CURRENT_MULTIPLIER;
3062
3063 curr = min_t(u32, curr, SDHCI_MAX_CURRENT_LIMIT);
3064 max_current_caps =
3065 (curr << SDHCI_MAX_CURRENT_330_SHIFT) |
3066 (curr << SDHCI_MAX_CURRENT_300_SHIFT) |
3067 (curr << SDHCI_MAX_CURRENT_180_SHIFT);
3068 }
3069 }
f2119df6
AN		 3070
3071 if (caps[0] & SDHCI_CAN_VDD_330) {
8f230f45 3072 ocr_avail |= MMC_VDD_32_33 | MMC_VDD_33_34;
f2119df6 3073
55c4665e 3074 mmc->max_current_330 = ((max_current_caps &
f2119df6
AN		 3075 SDHCI_MAX_CURRENT_330_MASK) >>
3076 SDHCI_MAX_CURRENT_330_SHIFT) *
3077 SDHCI_MAX_CURRENT_MULTIPLIER;
f2119df6
AN		 3078 }
3079 if (caps[0] & SDHCI_CAN_VDD_300) {
8f230f45 3080 ocr_avail |= MMC_VDD_29_30 | MMC_VDD_30_31;
f2119df6 3081
55c4665e 3082 mmc->max_current_300 = ((max_current_caps &
f2119df6
AN		 3083 SDHCI_MAX_CURRENT_300_MASK) >>
3084 SDHCI_MAX_CURRENT_300_SHIFT) *
3085 SDHCI_MAX_CURRENT_MULTIPLIER;
f2119df6
AN		 3086 }
3087 if (caps[0] & SDHCI_CAN_VDD_180) {
8f230f45
TI		 3088 ocr_avail |= MMC_VDD_165_195;
3089
55c4665e 3090 mmc->max_current_180 = ((max_current_caps &
f2119df6
AN		 3091 SDHCI_MAX_CURRENT_180_MASK) >>
3092 SDHCI_MAX_CURRENT_180_SHIFT) *
3093 SDHCI_MAX_CURRENT_MULTIPLIER;
f2119df6
AN		 3094 }
3095
3a48edc4
TK		 3096 if (mmc->ocr_avail)
3097 ocr_avail &= mmc->ocr_avail;
3098
c0b887b6 3099 if (host->ocr_mask)
3a48edc4 3100 ocr_avail &= host->ocr_mask;
c0b887b6 3101
8f230f45
TI		 3102 mmc->ocr_avail = ocr_avail;
3103 mmc->ocr_avail_sdio = ocr_avail;
3104 if (host->ocr_avail_sdio)
3105 mmc->ocr_avail_sdio &= host->ocr_avail_sdio;
3106 mmc->ocr_avail_sd = ocr_avail;
3107 if (host->ocr_avail_sd)
3108 mmc->ocr_avail_sd &= host->ocr_avail_sd;
3109 else /* normal SD controllers don't support 1.8V */
3110 mmc->ocr_avail_sd &= ~MMC_VDD_165_195;
3111 mmc->ocr_avail_mmc = ocr_avail;
3112 if (host->ocr_avail_mmc)
3113 mmc->ocr_avail_mmc &= host->ocr_avail_mmc;
146ad66e
PO		 3114
3115 if (mmc->ocr_avail == 0) {
a3c76eb9 3116 pr_err("%s: Hardware doesn't report any "
b69c9058 3117 "support voltages.\n", mmc_hostname(mmc));
b8c86fc5 3118 return -ENODEV;
146ad66e
PO		 3119 }
3120
d129bceb
PO		 3121 spin_lock_init(&host->lock);
3122
3123 /*
2134a922
PO		 3124 * Maximum number of segments. Depends on if the hardware
3125 * can do scatter/gather or not.
d129bceb 3126 */
2134a922 3127 if (host->flags & SDHCI_USE_ADMA)
a36274e0 3128 mmc->max_segs = 128;
a13abc7b 3129 else if (host->flags & SDHCI_USE_SDMA)
a36274e0 3130 mmc->max_segs = 1;
2134a922 3131 else /* PIO */
a36274e0 3132 mmc->max_segs = 128;
d129bceb
PO		 3133
3134 /*
bab76961 3135 * Maximum number of sectors in one transfer. Limited by DMA boundary
55db890a 3136 * size (512KiB).
d129bceb 3137 */
55db890a 3138 mmc->max_req_size = 524288;
d129bceb
PO		 3139
3140 /*
3141 * Maximum segment size. Could be one segment with the maximum number
2134a922
PO		 3142 * of bytes. When doing hardware scatter/gather, each entry cannot
3143 * be larger than 64 KiB though.
d129bceb 3144 */
30652aa3
OJ		 3145 if (host->flags & SDHCI_USE_ADMA) {
3146 if (host->quirks & SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC)
3147 mmc->max_seg_size = 65535;
3148 else
3149 mmc->max_seg_size = 65536;
3150 } else {
2134a922 3151 mmc->max_seg_size = mmc->max_req_size;
30652aa3 3152 }
d129bceb 3153
fe4a3c7a
PO		 3154 /*
3155 * Maximum block size. This varies from controller to controller and
3156 * is specified in the capabilities register.
3157 */
0633f654
AV		 3158 if (host->quirks & SDHCI_QUIRK_FORCE_BLK_SZ_2048) {
3159 mmc->max_blk_size = 2;
3160 } else {
f2119df6 3161 mmc->max_blk_size = (caps[0] & SDHCI_MAX_BLOCK_MASK) >>
0633f654
AV		 3162 SDHCI_MAX_BLOCK_SHIFT;
3163 if (mmc->max_blk_size >= 3) {
a3c76eb9 3164 pr_warning("%s: Invalid maximum block size, "
0633f654
AV		 3165 "assuming 512 bytes\n", mmc_hostname(mmc));
3166 mmc->max_blk_size = 0;
3167 }
3168 }
3169
3170 mmc->max_blk_size = 512 << mmc->max_blk_size;
fe4a3c7a 3171
55db890a
PO		 3172 /*
3173 * Maximum block count.
3174 */
1388eefd 3175 mmc->max_blk_count = (host->quirks & SDHCI_QUIRK_NO_MULTIBLOCK) ? 1 : 65535;
55db890a 3176
d129bceb
PO		 3177 /*
3178 * Init tasklets.
3179 */
d129bceb
PO		 3180 tasklet_init(&host->finish_tasklet,
3181 sdhci_tasklet_finish, (unsigned long)host);
3182
e4cad1b5 3183 setup_timer(&host->timer, sdhci_timeout_timer, (unsigned long)host);
d129bceb 3184
cf2b5eea 3185 if (host->version >= SDHCI_SPEC_300) {
b513ea25
AN		 3186 init_waitqueue_head(&host->buf_ready_int);
3187
cf2b5eea
AN		 3188 /* Initialize re-tuning timer */
3189 init_timer(&host->tuning_timer);
3190 host->tuning_timer.data = (unsigned long)host;
3191 host->tuning_timer.function = sdhci_tuning_timer;
3192 }
3193
2af502ca
SG		 3194 sdhci_init(host, 0);
3195
781e989c
RK		 3196 ret = request_threaded_irq(host->irq, sdhci_irq, sdhci_thread_irq,
3197 IRQF_SHARED, mmc_hostname(mmc), host);
0fc81ee3
MB		 3198 if (ret) {
3199 pr_err("%s: Failed to request IRQ %d: %d\n",
3200 mmc_hostname(mmc), host->irq, ret);
8ef1a143 3201 goto untasklet;
0fc81ee3 3202 }
d129bceb 3203
d129bceb
PO		 3204#ifdef CONFIG_MMC_DEBUG
3205 sdhci_dumpregs(host);
3206#endif
3207
f9134319 3208#ifdef SDHCI_USE_LEDS_CLASS
5dbace0c
HS		 3209 snprintf(host->led_name, sizeof(host->led_name),
3210 "%s::", mmc_hostname(mmc));
3211 host->led.name = host->led_name;
2f730fec
PO		 3212 host->led.brightness = LED_OFF;
3213 host->led.default_trigger = mmc_hostname(mmc);
3214 host->led.brightness_set = sdhci_led_control;
3215
b8c86fc5 3216 ret = led_classdev_register(mmc_dev(mmc), &host->led);
0fc81ee3
MB		 3217 if (ret) {
3218 pr_err("%s: Failed to register LED device: %d\n",
3219 mmc_hostname(mmc), ret);
2f730fec 3220 goto reset;
0fc81ee3 3221 }
2f730fec
PO		 3222#endif
3223
5f25a66f
PO		 3224 mmiowb();
3225
d129bceb
PO		 3226 mmc_add_host(mmc);
3227
a3c76eb9 3228 pr_info("%s: SDHCI controller on %s [%s] using %s\n",
d1b26863 3229 mmc_hostname(mmc), host->hw_name, dev_name(mmc_dev(mmc)),
a13abc7b
RR		 3230 (host->flags & SDHCI_USE_ADMA) ? "ADMA" :
3231 (host->flags & SDHCI_USE_SDMA) ? "DMA" : "PIO");
d129bceb 3232
7260cf5e
AV		 3233 sdhci_enable_card_detection(host);
3234
d129bceb
PO		 3235 return 0;
3236
f9134319 3237#ifdef SDHCI_USE_LEDS_CLASS
2f730fec 3238reset:
03231f9b 3239 sdhci_do_reset(host, SDHCI_RESET_ALL);
b537f94c
RK		 3240 sdhci_writel(host, 0, SDHCI_INT_ENABLE);
3241 sdhci_writel(host, 0, SDHCI_SIGNAL_ENABLE);
2f730fec
PO		 3242 free_irq(host->irq, host);
3243#endif
8ef1a143 3244untasklet:
d129bceb 3245 tasklet_kill(&host->finish_tasklet);
d129bceb
PO		 3246
3247 return ret;
3248}
3249
b8c86fc5 3250EXPORT_SYMBOL_GPL(sdhci_add_host);
d129bceb 3251
1e72859e 3252void sdhci_remove_host(struct sdhci_host *host, int dead)
b8c86fc5 3253{
3a48edc4 3254 struct mmc_host *mmc = host->mmc;
1e72859e
PO		 3255 unsigned long flags;
3256
3257 if (dead) {
3258 spin_lock_irqsave(&host->lock, flags);
3259
3260 host->flags |= SDHCI_DEVICE_DEAD;
3261
3262 if (host->mrq) {
a3c76eb9 3263 pr_err("%s: Controller removed during "
1e72859e
PO		 3264 " transfer!\n", mmc_hostname(host->mmc));
3265
3266 host->mrq->cmd->error = -ENOMEDIUM;
3267 tasklet_schedule(&host->finish_tasklet);
3268 }
3269
3270 spin_unlock_irqrestore(&host->lock, flags);
3271 }
3272
7260cf5e
AV		 3273 sdhci_disable_card_detection(host);
3274
b8c86fc5 3275 mmc_remove_host(host->mmc);
d129bceb 3276
f9134319 3277#ifdef SDHCI_USE_LEDS_CLASS
2f730fec
PO		 3278 led_classdev_unregister(&host->led);
3279#endif
3280
1e72859e 3281 if (!dead)
03231f9b 3282 sdhci_do_reset(host, SDHCI_RESET_ALL);
d129bceb 3283
b537f94c
RK		 3284 sdhci_writel(host, 0, SDHCI_INT_ENABLE);
3285 sdhci_writel(host, 0, SDHCI_SIGNAL_ENABLE);
d129bceb
PO		 3286 free_irq(host->irq, host);
3287
3288 del_timer_sync(&host->timer);
3289
d129bceb 3290 tasklet_kill(&host->finish_tasklet);
2134a922 3291
3a48edc4
TK		 3292 if (!IS_ERR(mmc->supply.vmmc))
3293 regulator_disable(mmc->supply.vmmc);
9bea3c85 3294
3a48edc4
TK		 3295 if (!IS_ERR(mmc->supply.vqmmc))
3296 regulator_disable(mmc->supply.vqmmc);
6231f3de 3297
d1e49f77
RK		 3298 if (host->adma_desc)
3299 dma_free_coherent(mmc_dev(host->mmc), ADMA_SIZE,
3300 host->adma_desc, host->adma_addr);
2134a922
PO		 3301 kfree(host->align_buffer);
3302
3303 host->adma_desc = NULL;
3304 host->align_buffer = NULL;
d129bceb
PO		 3305}
3306
b8c86fc5 3307EXPORT_SYMBOL_GPL(sdhci_remove_host);
d129bceb 3308
b8c86fc5 3309void sdhci_free_host(struct sdhci_host *host)
d129bceb 3310{
b8c86fc5 3311 mmc_free_host(host->mmc);
d129bceb
PO		 3312}
3313
b8c86fc5 3314EXPORT_SYMBOL_GPL(sdhci_free_host);
d129bceb
PO		 3315
3316/*****************************************************************************\
3317 * *
3318 * Driver init/exit *
3319 * *
3320\*****************************************************************************/
3321
3322static int __init sdhci_drv_init(void)
3323{
a3c76eb9 3324 pr_info(DRIVER_NAME
52fbf9c9 3325 ": Secure Digital Host Controller Interface driver\n");
a3c76eb9 3326 pr_info(DRIVER_NAME ": Copyright(c) Pierre Ossman\n");
d129bceb 3327
b8c86fc5 3328 return 0;
d129bceb
PO		 3329}
3330
3331static void __exit sdhci_drv_exit(void)
3332{
d129bceb
PO		 3333}
3334
3335module_init(sdhci_drv_init);
3336module_exit(sdhci_drv_exit);
3337
df673b22 3338module_param(debug_quirks, uint, 0444);
66fd8ad5 3339module_param(debug_quirks2, uint, 0444);
67435274 3340
32710e8f 3341MODULE_AUTHOR("Pierre Ossman <pierre@ossman.eu>");
b8c86fc5 3342MODULE_DESCRIPTION("Secure Digital Host Controller Interface core driver");
d129bceb 3343MODULE_LICENSE("GPL");
67435274 3344
df673b22 3345MODULE_PARM_DESC(debug_quirks, "Force certain quirks.");
66fd8ad5 3346MODULE_PARM_DESC(debug_quirks2, "Force certain other quirks.");
Linux kernel - Deliverables
This page took 0.873513 seconds and 5 git commands to generate.