Commit | Line | Data |
---|---|---|
efa2ca73 RJ |
1 | /* |
2 | * Handles the M-Systems DiskOnChip G3 chip | |
3 | * | |
4 | * Copyright (C) 2011 Robert Jarzmik | |
5 | * | |
6 | * This program is free software; you can redistribute it and/or modify | |
7 | * it under the terms of the GNU General Public License as published by | |
8 | * the Free Software Foundation; either version 2 of the License, or | |
9 | * (at your option) any later version. | |
10 | * | |
11 | * This program is distributed in the hope that it will be useful, | |
12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
14 | * GNU General Public License for more details. | |
15 | * | |
16 | * You should have received a copy of the GNU General Public License | |
17 | * along with this program; if not, write to the Free Software | |
18 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
19 | * | |
20 | */ | |
21 | ||
22 | #include <linux/kernel.h> | |
23 | #include <linux/module.h> | |
24 | #include <linux/errno.h> | |
25 | #include <linux/platform_device.h> | |
26 | #include <linux/string.h> | |
27 | #include <linux/slab.h> | |
28 | #include <linux/io.h> | |
29 | #include <linux/delay.h> | |
30 | #include <linux/mtd/mtd.h> | |
31 | #include <linux/mtd/partitions.h> | |
32 | ||
33 | #include <linux/debugfs.h> | |
34 | #include <linux/seq_file.h> | |
35 | ||
36 | #define CREATE_TRACE_POINTS | |
37 | #include "docg3.h" | |
38 | ||
39 | /* | |
40 | * This driver handles the DiskOnChip G3 flash memory. | |
41 | * | |
42 | * As no specification is available from M-Systems/Sandisk, this drivers lacks | |
43 | * several functions available on the chip, as : | |
44 | * - block erase | |
45 | * - page write | |
46 | * - IPL write | |
47 | * - ECC fixing (lack of BCH algorith understanding) | |
48 | * - powerdown / powerup | |
49 | * | |
50 | * The bus data width (8bits versus 16bits) is not handled (if_cfg flag), and | |
51 | * the driver assumes a 16bits data bus. | |
52 | * | |
53 | * DocG3 relies on 2 ECC algorithms, which are handled in hardware : | |
54 | * - a 1 byte Hamming code stored in the OOB for each page | |
55 | * - a 7 bytes BCH code stored in the OOB for each page | |
56 | * The BCH part is only used for check purpose, no correction is available as | |
57 | * some information is missing. What is known is that : | |
58 | * - BCH is in GF(2^14) | |
59 | * - BCH is over data of 520 bytes (512 page + 7 page_info bytes | |
60 | * + 1 hamming byte) | |
61 | * - BCH can correct up to 4 bits (t = 4) | |
62 | * - BCH syndroms are calculated in hardware, and checked in hardware as well | |
63 | * | |
64 | */ | |
65 | ||
66 | static inline u8 doc_readb(struct docg3 *docg3, u16 reg) | |
67 | { | |
68 | u8 val = readb(docg3->base + reg); | |
69 | ||
70 | trace_docg3_io(0, 8, reg, (int)val); | |
71 | return val; | |
72 | } | |
73 | ||
74 | static inline u16 doc_readw(struct docg3 *docg3, u16 reg) | |
75 | { | |
76 | u16 val = readw(docg3->base + reg); | |
77 | ||
78 | trace_docg3_io(0, 16, reg, (int)val); | |
79 | return val; | |
80 | } | |
81 | ||
82 | static inline void doc_writeb(struct docg3 *docg3, u8 val, u16 reg) | |
83 | { | |
84 | writeb(val, docg3->base + reg); | |
85 | trace_docg3_io(1, 16, reg, val); | |
86 | } | |
87 | ||
88 | static inline void doc_writew(struct docg3 *docg3, u16 val, u16 reg) | |
89 | { | |
90 | writew(val, docg3->base + reg); | |
91 | trace_docg3_io(1, 16, reg, val); | |
92 | } | |
93 | ||
94 | static inline void doc_flash_command(struct docg3 *docg3, u8 cmd) | |
95 | { | |
96 | doc_writeb(docg3, cmd, DOC_FLASHCOMMAND); | |
97 | } | |
98 | ||
99 | static inline void doc_flash_sequence(struct docg3 *docg3, u8 seq) | |
100 | { | |
101 | doc_writeb(docg3, seq, DOC_FLASHSEQUENCE); | |
102 | } | |
103 | ||
104 | static inline void doc_flash_address(struct docg3 *docg3, u8 addr) | |
105 | { | |
106 | doc_writeb(docg3, addr, DOC_FLASHADDRESS); | |
107 | } | |
108 | ||
109 | static char const *part_probes[] = { "cmdlinepart", "saftlpart", NULL }; | |
110 | ||
111 | static int doc_register_readb(struct docg3 *docg3, int reg) | |
112 | { | |
113 | u8 val; | |
114 | ||
115 | doc_writew(docg3, reg, DOC_READADDRESS); | |
116 | val = doc_readb(docg3, reg); | |
117 | doc_vdbg("Read register %04x : %02x\n", reg, val); | |
118 | return val; | |
119 | } | |
120 | ||
121 | static int doc_register_readw(struct docg3 *docg3, int reg) | |
122 | { | |
123 | u16 val; | |
124 | ||
125 | doc_writew(docg3, reg, DOC_READADDRESS); | |
126 | val = doc_readw(docg3, reg); | |
127 | doc_vdbg("Read register %04x : %04x\n", reg, val); | |
128 | return val; | |
129 | } | |
130 | ||
131 | /** | |
132 | * doc_delay - delay docg3 operations | |
133 | * @docg3: the device | |
134 | * @nbNOPs: the number of NOPs to issue | |
135 | * | |
136 | * As no specification is available, the right timings between chip commands are | |
137 | * unknown. The only available piece of information are the observed nops on a | |
138 | * working docg3 chip. | |
139 | * Therefore, doc_delay relies on a busy loop of NOPs, instead of scheduler | |
140 | * friendlier msleep() functions or blocking mdelay(). | |
141 | */ | |
142 | static void doc_delay(struct docg3 *docg3, int nbNOPs) | |
143 | { | |
144 | int i; | |
145 | ||
ac48e800 | 146 | doc_vdbg("NOP x %d\n", nbNOPs); |
efa2ca73 RJ |
147 | for (i = 0; i < nbNOPs; i++) |
148 | doc_writeb(docg3, 0, DOC_NOP); | |
149 | } | |
150 | ||
151 | static int is_prot_seq_error(struct docg3 *docg3) | |
152 | { | |
153 | int ctrl; | |
154 | ||
155 | ctrl = doc_register_readb(docg3, DOC_FLASHCONTROL); | |
156 | return ctrl & (DOC_CTRL_PROTECTION_ERROR | DOC_CTRL_SEQUENCE_ERROR); | |
157 | } | |
158 | ||
159 | static int doc_is_ready(struct docg3 *docg3) | |
160 | { | |
161 | int ctrl; | |
162 | ||
163 | ctrl = doc_register_readb(docg3, DOC_FLASHCONTROL); | |
164 | return ctrl & DOC_CTRL_FLASHREADY; | |
165 | } | |
166 | ||
167 | static int doc_wait_ready(struct docg3 *docg3) | |
168 | { | |
169 | int maxWaitCycles = 100; | |
170 | ||
171 | do { | |
172 | doc_delay(docg3, 4); | |
173 | cpu_relax(); | |
174 | } while (!doc_is_ready(docg3) && maxWaitCycles--); | |
175 | doc_delay(docg3, 2); | |
176 | if (maxWaitCycles > 0) | |
177 | return 0; | |
178 | else | |
179 | return -EIO; | |
180 | } | |
181 | ||
182 | static int doc_reset_seq(struct docg3 *docg3) | |
183 | { | |
184 | int ret; | |
185 | ||
186 | doc_writeb(docg3, 0x10, DOC_FLASHCONTROL); | |
187 | doc_flash_sequence(docg3, DOC_SEQ_RESET); | |
188 | doc_flash_command(docg3, DOC_CMD_RESET); | |
189 | doc_delay(docg3, 2); | |
190 | ret = doc_wait_ready(docg3); | |
191 | ||
192 | doc_dbg("doc_reset_seq() -> isReady=%s\n", ret ? "false" : "true"); | |
193 | return ret; | |
194 | } | |
195 | ||
196 | /** | |
197 | * doc_read_data_area - Read data from data area | |
198 | * @docg3: the device | |
199 | * @buf: the buffer to fill in | |
200 | * @len: the lenght to read | |
201 | * @first: first time read, DOC_READADDRESS should be set | |
202 | * | |
203 | * Reads bytes from flash data. Handles the single byte / even bytes reads. | |
204 | */ | |
205 | static void doc_read_data_area(struct docg3 *docg3, void *buf, int len, | |
206 | int first) | |
207 | { | |
208 | int i, cdr, len4; | |
209 | u16 data16, *dst16; | |
210 | u8 data8, *dst8; | |
211 | ||
212 | doc_dbg("doc_read_data_area(buf=%p, len=%d)\n", buf, len); | |
213 | cdr = len & 0x3; | |
214 | len4 = len - cdr; | |
215 | ||
216 | if (first) | |
217 | doc_writew(docg3, DOC_IOSPACE_DATA, DOC_READADDRESS); | |
218 | dst16 = buf; | |
219 | for (i = 0; i < len4; i += 2) { | |
220 | data16 = doc_readw(docg3, DOC_IOSPACE_DATA); | |
221 | *dst16 = data16; | |
222 | dst16++; | |
223 | } | |
224 | ||
225 | if (cdr) { | |
226 | doc_writew(docg3, DOC_IOSPACE_DATA | DOC_READADDR_ONE_BYTE, | |
227 | DOC_READADDRESS); | |
228 | doc_delay(docg3, 1); | |
229 | dst8 = (u8 *)dst16; | |
230 | for (i = 0; i < cdr; i++) { | |
231 | data8 = doc_readb(docg3, DOC_IOSPACE_DATA); | |
232 | *dst8 = data8; | |
233 | dst8++; | |
234 | } | |
235 | } | |
236 | } | |
237 | ||
238 | /** | |
239 | * doc_set_data_mode - Sets the flash to reliable data mode | |
240 | * @docg3: the device | |
241 | * | |
242 | * The reliable data mode is a bit slower than the fast mode, but less errors | |
243 | * occur. Entering the reliable mode cannot be done without entering the fast | |
244 | * mode first. | |
245 | */ | |
246 | static void doc_set_reliable_mode(struct docg3 *docg3) | |
247 | { | |
248 | doc_dbg("doc_set_reliable_mode()\n"); | |
249 | doc_flash_sequence(docg3, DOC_SEQ_SET_MODE); | |
250 | doc_flash_command(docg3, DOC_CMD_FAST_MODE); | |
251 | doc_flash_command(docg3, DOC_CMD_RELIABLE_MODE); | |
252 | doc_delay(docg3, 2); | |
253 | } | |
254 | ||
255 | /** | |
256 | * doc_set_asic_mode - Set the ASIC mode | |
257 | * @docg3: the device | |
258 | * @mode: the mode | |
259 | * | |
260 | * The ASIC can work in 3 modes : | |
261 | * - RESET: all registers are zeroed | |
262 | * - NORMAL: receives and handles commands | |
263 | * - POWERDOWN: minimal poweruse, flash parts shut off | |
264 | */ | |
265 | static void doc_set_asic_mode(struct docg3 *docg3, u8 mode) | |
266 | { | |
267 | int i; | |
268 | ||
269 | for (i = 0; i < 12; i++) | |
270 | doc_readb(docg3, DOC_IOSPACE_IPL); | |
271 | ||
272 | mode |= DOC_ASICMODE_MDWREN; | |
273 | doc_dbg("doc_set_asic_mode(%02x)\n", mode); | |
274 | doc_writeb(docg3, mode, DOC_ASICMODE); | |
275 | doc_writeb(docg3, ~mode, DOC_ASICMODECONFIRM); | |
276 | doc_delay(docg3, 1); | |
277 | } | |
278 | ||
279 | /** | |
280 | * doc_set_device_id - Sets the devices id for cascaded G3 chips | |
281 | * @docg3: the device | |
282 | * @id: the chip to select (amongst 0, 1, 2, 3) | |
283 | * | |
284 | * There can be 4 cascaded G3 chips. This function selects the one which will | |
285 | * should be the active one. | |
286 | */ | |
287 | static void doc_set_device_id(struct docg3 *docg3, int id) | |
288 | { | |
289 | u8 ctrl; | |
290 | ||
291 | doc_dbg("doc_set_device_id(%d)\n", id); | |
292 | doc_writeb(docg3, id, DOC_DEVICESELECT); | |
293 | ctrl = doc_register_readb(docg3, DOC_FLASHCONTROL); | |
294 | ||
295 | ctrl &= ~DOC_CTRL_VIOLATION; | |
296 | ctrl |= DOC_CTRL_CE; | |
297 | doc_writeb(docg3, ctrl, DOC_FLASHCONTROL); | |
298 | } | |
299 | ||
300 | /** | |
301 | * doc_set_extra_page_mode - Change flash page layout | |
302 | * @docg3: the device | |
303 | * | |
304 | * Normally, the flash page is split into the data (512 bytes) and the out of | |
305 | * band data (16 bytes). For each, 4 more bytes can be accessed, where the wear | |
306 | * leveling counters are stored. To access this last area of 4 bytes, a special | |
307 | * mode must be input to the flash ASIC. | |
308 | * | |
309 | * Returns 0 if no error occured, -EIO else. | |
310 | */ | |
311 | static int doc_set_extra_page_mode(struct docg3 *docg3) | |
312 | { | |
313 | int fctrl; | |
314 | ||
315 | doc_dbg("doc_set_extra_page_mode()\n"); | |
316 | doc_flash_sequence(docg3, DOC_SEQ_PAGE_SIZE_532); | |
317 | doc_flash_command(docg3, DOC_CMD_PAGE_SIZE_532); | |
318 | doc_delay(docg3, 2); | |
319 | ||
320 | fctrl = doc_register_readb(docg3, DOC_FLASHCONTROL); | |
321 | if (fctrl & (DOC_CTRL_PROTECTION_ERROR | DOC_CTRL_SEQUENCE_ERROR)) | |
322 | return -EIO; | |
323 | else | |
324 | return 0; | |
325 | } | |
326 | ||
327 | /** | |
328 | * doc_seek - Set both flash planes to the specified block, page for reading | |
329 | * @docg3: the device | |
330 | * @block0: the first plane block index | |
331 | * @block1: the second plane block index | |
332 | * @page: the page index within the block | |
333 | * @wear: if true, read will occur on the 4 extra bytes of the wear area | |
334 | * @ofs: offset in page to read | |
335 | * | |
336 | * Programs the flash even and odd planes to the specific block and page. | |
337 | * Alternatively, programs the flash to the wear area of the specified page. | |
338 | */ | |
339 | static int doc_read_seek(struct docg3 *docg3, int block0, int block1, int page, | |
340 | int wear, int ofs) | |
341 | { | |
342 | int sector, ret = 0; | |
343 | ||
344 | doc_dbg("doc_seek(blocks=(%d,%d), page=%d, ofs=%d, wear=%d)\n", | |
345 | block0, block1, page, ofs, wear); | |
346 | ||
347 | if (!wear && (ofs < 2 * DOC_LAYOUT_PAGE_SIZE)) { | |
348 | doc_flash_sequence(docg3, DOC_SEQ_SET_PLANE1); | |
349 | doc_flash_command(docg3, DOC_CMD_READ_PLANE1); | |
350 | doc_delay(docg3, 2); | |
351 | } else { | |
352 | doc_flash_sequence(docg3, DOC_SEQ_SET_PLANE2); | |
353 | doc_flash_command(docg3, DOC_CMD_READ_PLANE2); | |
354 | doc_delay(docg3, 2); | |
355 | } | |
356 | ||
357 | doc_set_reliable_mode(docg3); | |
358 | if (wear) | |
359 | ret = doc_set_extra_page_mode(docg3); | |
360 | if (ret) | |
361 | goto out; | |
362 | ||
363 | sector = (block0 << DOC_ADDR_BLOCK_SHIFT) + (page & DOC_ADDR_PAGE_MASK); | |
364 | doc_flash_sequence(docg3, DOC_SEQ_READ); | |
365 | doc_flash_command(docg3, DOC_CMD_PROG_BLOCK_ADDR); | |
366 | doc_delay(docg3, 1); | |
367 | doc_flash_address(docg3, sector & 0xff); | |
368 | doc_flash_address(docg3, (sector >> 8) & 0xff); | |
369 | doc_flash_address(docg3, (sector >> 16) & 0xff); | |
370 | doc_delay(docg3, 1); | |
371 | ||
372 | sector = (block1 << DOC_ADDR_BLOCK_SHIFT) + (page & DOC_ADDR_PAGE_MASK); | |
373 | doc_flash_command(docg3, DOC_CMD_PROG_BLOCK_ADDR); | |
374 | doc_delay(docg3, 1); | |
375 | doc_flash_address(docg3, sector & 0xff); | |
376 | doc_flash_address(docg3, (sector >> 8) & 0xff); | |
377 | doc_flash_address(docg3, (sector >> 16) & 0xff); | |
378 | doc_delay(docg3, 2); | |
379 | ||
380 | out: | |
381 | return ret; | |
382 | } | |
383 | ||
384 | /** | |
385 | * doc_read_page_ecc_init - Initialize hardware ECC engine | |
386 | * @docg3: the device | |
387 | * @len: the number of bytes covered by the ECC (BCH covered) | |
388 | * | |
389 | * The function does initialize the hardware ECC engine to compute the Hamming | |
390 | * ECC (on 1 byte) and the BCH Syndroms (on 7 bytes). | |
391 | * | |
392 | * Return 0 if succeeded, -EIO on error | |
393 | */ | |
394 | static int doc_read_page_ecc_init(struct docg3 *docg3, int len) | |
395 | { | |
396 | doc_writew(docg3, DOC_ECCCONF0_READ_MODE | |
397 | | DOC_ECCCONF0_BCH_ENABLE | DOC_ECCCONF0_HAMMING_ENABLE | |
398 | | (len & DOC_ECCCONF0_DATA_BYTES_MASK), | |
399 | DOC_ECCCONF0); | |
400 | doc_delay(docg3, 4); | |
401 | doc_register_readb(docg3, DOC_FLASHCONTROL); | |
402 | return doc_wait_ready(docg3); | |
403 | } | |
404 | ||
405 | /** | |
406 | * doc_read_page_prepare - Prepares reading data from a flash page | |
407 | * @docg3: the device | |
408 | * @block0: the first plane block index on flash memory | |
409 | * @block1: the second plane block index on flash memory | |
410 | * @page: the page index in the block | |
411 | * @offset: the offset in the page (must be a multiple of 4) | |
412 | * | |
413 | * Prepares the page to be read in the flash memory : | |
414 | * - tell ASIC to map the flash pages | |
415 | * - tell ASIC to be in read mode | |
416 | * | |
417 | * After a call to this method, a call to doc_read_page_finish is mandatory, | |
418 | * to end the read cycle of the flash. | |
419 | * | |
420 | * Read data from a flash page. The length to be read must be between 0 and | |
421 | * (page_size + oob_size + wear_size), ie. 532, and a multiple of 4 (because | |
422 | * the extra bytes reading is not implemented). | |
423 | * | |
424 | * As pages are grouped by 2 (in 2 planes), reading from a page must be done | |
425 | * in two steps: | |
426 | * - one read of 512 bytes at offset 0 | |
427 | * - one read of 512 bytes at offset 512 + 16 | |
428 | * | |
429 | * Returns 0 if successful, -EIO if a read error occured. | |
430 | */ | |
431 | static int doc_read_page_prepare(struct docg3 *docg3, int block0, int block1, | |
432 | int page, int offset) | |
433 | { | |
434 | int wear_area = 0, ret = 0; | |
435 | ||
436 | doc_dbg("doc_read_page_prepare(blocks=(%d,%d), page=%d, ofsInPage=%d)\n", | |
437 | block0, block1, page, offset); | |
438 | if (offset >= DOC_LAYOUT_WEAR_OFFSET) | |
439 | wear_area = 1; | |
440 | if (!wear_area && offset > (DOC_LAYOUT_PAGE_OOB_SIZE * 2)) | |
441 | return -EINVAL; | |
442 | ||
443 | doc_set_device_id(docg3, docg3->device_id); | |
444 | ret = doc_reset_seq(docg3); | |
445 | if (ret) | |
446 | goto err; | |
447 | ||
448 | /* Program the flash address block and page */ | |
449 | ret = doc_read_seek(docg3, block0, block1, page, wear_area, offset); | |
450 | if (ret) | |
451 | goto err; | |
452 | ||
453 | doc_flash_command(docg3, DOC_CMD_READ_ALL_PLANES); | |
454 | doc_delay(docg3, 2); | |
455 | doc_wait_ready(docg3); | |
456 | ||
457 | doc_flash_command(docg3, DOC_CMD_SET_ADDR_READ); | |
458 | doc_delay(docg3, 1); | |
459 | if (offset >= DOC_LAYOUT_PAGE_SIZE * 2) | |
460 | offset -= 2 * DOC_LAYOUT_PAGE_SIZE; | |
461 | doc_flash_address(docg3, offset >> 2); | |
462 | doc_delay(docg3, 1); | |
463 | doc_wait_ready(docg3); | |
464 | ||
465 | doc_flash_command(docg3, DOC_CMD_READ_FLASH); | |
466 | ||
467 | return 0; | |
468 | err: | |
469 | doc_writeb(docg3, 0, DOC_DATAEND); | |
470 | doc_delay(docg3, 2); | |
471 | return -EIO; | |
472 | } | |
473 | ||
474 | /** | |
475 | * doc_read_page_getbytes - Reads bytes from a prepared page | |
476 | * @docg3: the device | |
477 | * @len: the number of bytes to be read (must be a multiple of 4) | |
478 | * @buf: the buffer to be filled in | |
479 | * @first: 1 if first time read, DOC_READADDRESS should be set | |
480 | * | |
481 | */ | |
482 | static int doc_read_page_getbytes(struct docg3 *docg3, int len, u_char *buf, | |
483 | int first) | |
484 | { | |
485 | doc_read_data_area(docg3, buf, len, first); | |
486 | doc_delay(docg3, 2); | |
487 | return len; | |
488 | } | |
489 | ||
490 | /** | |
491 | * doc_get_hw_bch_syndroms - Get hardware calculated BCH syndroms | |
492 | * @docg3: the device | |
493 | * @syns: the array of 7 integers where the syndroms will be stored | |
494 | */ | |
495 | static void doc_get_hw_bch_syndroms(struct docg3 *docg3, int *syns) | |
496 | { | |
497 | int i; | |
498 | ||
499 | for (i = 0; i < DOC_ECC_BCH_SIZE; i++) | |
500 | syns[i] = doc_register_readb(docg3, DOC_BCH_SYNDROM(i)); | |
501 | } | |
502 | ||
503 | /** | |
504 | * doc_read_page_finish - Ends reading of a flash page | |
505 | * @docg3: the device | |
506 | * | |
507 | * As a side effect, resets the chip selector to 0. This ensures that after each | |
508 | * read operation, the floor 0 is selected. Therefore, if the systems halts, the | |
509 | * reboot will boot on floor 0, where the IPL is. | |
510 | */ | |
511 | static void doc_read_page_finish(struct docg3 *docg3) | |
512 | { | |
513 | doc_writeb(docg3, 0, DOC_DATAEND); | |
514 | doc_delay(docg3, 2); | |
515 | doc_set_device_id(docg3, 0); | |
516 | } | |
517 | ||
518 | /** | |
519 | * calc_block_sector - Calculate blocks, pages and ofs. | |
520 | ||
521 | * @from: offset in flash | |
522 | * @block0: first plane block index calculated | |
523 | * @block1: second plane block index calculated | |
524 | * @page: page calculated | |
525 | * @ofs: offset in page | |
526 | */ | |
527 | static void calc_block_sector(loff_t from, int *block0, int *block1, int *page, | |
528 | int *ofs) | |
529 | { | |
530 | uint sector; | |
531 | ||
532 | sector = from / DOC_LAYOUT_PAGE_SIZE; | |
533 | *block0 = sector / (DOC_LAYOUT_PAGES_PER_BLOCK * DOC_LAYOUT_NBPLANES) | |
534 | * DOC_LAYOUT_NBPLANES; | |
535 | *block1 = *block0 + 1; | |
536 | *page = sector % (DOC_LAYOUT_PAGES_PER_BLOCK * DOC_LAYOUT_NBPLANES); | |
537 | *page /= DOC_LAYOUT_NBPLANES; | |
538 | if (sector % 2) | |
539 | *ofs = DOC_LAYOUT_PAGE_OOB_SIZE; | |
540 | else | |
541 | *ofs = 0; | |
542 | } | |
543 | ||
544 | /** | |
545 | * doc_read - Read bytes from flash | |
546 | * @mtd: the device | |
547 | * @from: the offset from first block and first page, in bytes, aligned on page | |
548 | * size | |
549 | * @len: the number of bytes to read (must be a multiple of 4) | |
550 | * @retlen: the number of bytes actually read | |
551 | * @buf: the filled in buffer | |
552 | * | |
553 | * Reads flash memory pages. This function does not read the OOB chunk, but only | |
554 | * the page data. | |
555 | * | |
556 | * Returns 0 if read successfull, of -EIO, -EINVAL if an error occured | |
557 | */ | |
558 | static int doc_read(struct mtd_info *mtd, loff_t from, size_t len, | |
559 | size_t *retlen, u_char *buf) | |
560 | { | |
561 | struct docg3 *docg3 = mtd->priv; | |
562 | int block0, block1, page, readlen, ret, ofs = 0; | |
563 | int syn[DOC_ECC_BCH_SIZE], eccconf1; | |
564 | u8 oob[DOC_LAYOUT_OOB_SIZE]; | |
565 | ||
566 | ret = -EINVAL; | |
567 | doc_dbg("doc_read(from=%lld, len=%zu, buf=%p)\n", from, len, buf); | |
568 | if (from % DOC_LAYOUT_PAGE_SIZE) | |
569 | goto err; | |
570 | if (len % 4) | |
571 | goto err; | |
572 | calc_block_sector(from, &block0, &block1, &page, &ofs); | |
573 | if (block1 > docg3->max_block) | |
574 | goto err; | |
575 | ||
576 | *retlen = 0; | |
577 | ret = 0; | |
578 | readlen = min_t(size_t, len, (size_t)DOC_LAYOUT_PAGE_SIZE); | |
579 | while (!ret && len > 0) { | |
580 | readlen = min_t(size_t, len, (size_t)DOC_LAYOUT_PAGE_SIZE); | |
581 | ret = doc_read_page_prepare(docg3, block0, block1, page, ofs); | |
582 | if (ret < 0) | |
583 | goto err; | |
584 | ret = doc_read_page_ecc_init(docg3, DOC_ECC_BCH_COVERED_BYTES); | |
585 | if (ret < 0) | |
586 | goto err_in_read; | |
587 | ret = doc_read_page_getbytes(docg3, readlen, buf, 1); | |
588 | if (ret < readlen) | |
589 | goto err_in_read; | |
590 | ret = doc_read_page_getbytes(docg3, DOC_LAYOUT_OOB_SIZE, | |
591 | oob, 0); | |
592 | if (ret < DOC_LAYOUT_OOB_SIZE) | |
593 | goto err_in_read; | |
594 | ||
595 | *retlen += readlen; | |
596 | buf += readlen; | |
597 | len -= readlen; | |
598 | ||
599 | ofs ^= DOC_LAYOUT_PAGE_OOB_SIZE; | |
600 | if (ofs == 0) | |
601 | page += 2; | |
602 | if (page > DOC_ADDR_PAGE_MASK) { | |
603 | page = 0; | |
604 | block0 += 2; | |
605 | block1 += 2; | |
606 | } | |
607 | ||
608 | /* | |
609 | * There should be a BCH bitstream fixing algorithm here ... | |
610 | * By now, a page read failure is triggered by BCH error | |
611 | */ | |
612 | doc_get_hw_bch_syndroms(docg3, syn); | |
613 | eccconf1 = doc_register_readb(docg3, DOC_ECCCONF1); | |
614 | ||
615 | doc_dbg("OOB - INFO: %02x:%02x:%02x:%02x:%02x:%02x:%02x\n", | |
616 | oob[0], oob[1], oob[2], oob[3], oob[4], | |
617 | oob[5], oob[6]); | |
618 | doc_dbg("OOB - HAMMING: %02x\n", oob[7]); | |
619 | doc_dbg("OOB - BCH_ECC: %02x:%02x:%02x:%02x:%02x:%02x:%02x\n", | |
620 | oob[8], oob[9], oob[10], oob[11], oob[12], | |
621 | oob[13], oob[14]); | |
622 | doc_dbg("OOB - UNUSED: %02x\n", oob[15]); | |
623 | doc_dbg("ECC checks: ECCConf1=%x\n", eccconf1); | |
624 | doc_dbg("ECC BCH syndrom: %02x:%02x:%02x:%02x:%02x:%02x:%02x\n", | |
625 | syn[0], syn[1], syn[2], syn[3], syn[4], syn[5], syn[6]); | |
626 | ||
627 | ret = -EBADMSG; | |
628 | if (block0 >= DOC_LAYOUT_BLOCK_FIRST_DATA) { | |
629 | if (eccconf1 & DOC_ECCCONF1_BCH_SYNDROM_ERR) | |
630 | goto err_in_read; | |
631 | if (is_prot_seq_error(docg3)) | |
632 | goto err_in_read; | |
633 | } | |
634 | doc_read_page_finish(docg3); | |
635 | } | |
636 | ||
637 | return 0; | |
638 | err_in_read: | |
639 | doc_read_page_finish(docg3); | |
640 | err: | |
641 | return ret; | |
642 | } | |
643 | ||
644 | /** | |
645 | * doc_read_oob - Read out of band bytes from flash | |
646 | * @mtd: the device | |
647 | * @from: the offset from first block and first page, in bytes, aligned on page | |
648 | * size | |
649 | * @ops: the mtd oob structure | |
650 | * | |
651 | * Reads flash memory OOB area of pages. | |
652 | * | |
653 | * Returns 0 if read successfull, of -EIO, -EINVAL if an error occured | |
654 | */ | |
655 | static int doc_read_oob(struct mtd_info *mtd, loff_t from, | |
656 | struct mtd_oob_ops *ops) | |
657 | { | |
658 | struct docg3 *docg3 = mtd->priv; | |
659 | int block0, block1, page, ofs, ret; | |
660 | u8 *buf = ops->oobbuf; | |
661 | size_t len = ops->ooblen; | |
662 | ||
663 | doc_dbg("doc_read_oob(from=%lld, buf=%p, len=%zu)\n", from, buf, len); | |
664 | if (len != DOC_LAYOUT_OOB_SIZE) | |
665 | return -EINVAL; | |
666 | ||
667 | switch (ops->mode) { | |
668 | case MTD_OPS_PLACE_OOB: | |
669 | buf += ops->ooboffs; | |
670 | break; | |
671 | default: | |
672 | break; | |
673 | } | |
674 | ||
675 | calc_block_sector(from, &block0, &block1, &page, &ofs); | |
676 | if (block1 > docg3->max_block) | |
677 | return -EINVAL; | |
678 | ||
679 | ret = doc_read_page_prepare(docg3, block0, block1, page, | |
680 | ofs + DOC_LAYOUT_PAGE_SIZE); | |
681 | if (!ret) | |
682 | ret = doc_read_page_ecc_init(docg3, DOC_LAYOUT_OOB_SIZE); | |
683 | if (!ret) | |
684 | ret = doc_read_page_getbytes(docg3, DOC_LAYOUT_OOB_SIZE, | |
685 | buf, 1); | |
686 | doc_read_page_finish(docg3); | |
687 | ||
688 | if (ret > 0) | |
689 | ops->oobretlen = ret; | |
690 | else | |
691 | ops->oobretlen = 0; | |
692 | return (ret > 0) ? 0 : ret; | |
693 | } | |
694 | ||
695 | static int doc_reload_bbt(struct docg3 *docg3) | |
696 | { | |
697 | int block = DOC_LAYOUT_BLOCK_BBT; | |
698 | int ret = 0, nbpages, page; | |
699 | u_char *buf = docg3->bbt; | |
700 | ||
701 | nbpages = DIV_ROUND_UP(docg3->max_block + 1, 8 * DOC_LAYOUT_PAGE_SIZE); | |
702 | for (page = 0; !ret && (page < nbpages); page++) { | |
703 | ret = doc_read_page_prepare(docg3, block, block + 1, | |
704 | page + DOC_LAYOUT_PAGE_BBT, 0); | |
705 | if (!ret) | |
706 | ret = doc_read_page_ecc_init(docg3, | |
707 | DOC_LAYOUT_PAGE_SIZE); | |
708 | if (!ret) | |
709 | doc_read_page_getbytes(docg3, DOC_LAYOUT_PAGE_SIZE, | |
710 | buf, 1); | |
711 | buf += DOC_LAYOUT_PAGE_SIZE; | |
712 | } | |
713 | doc_read_page_finish(docg3); | |
714 | return ret; | |
715 | } | |
716 | ||
717 | /** | |
718 | * doc_block_isbad - Checks whether a block is good or not | |
719 | * @mtd: the device | |
720 | * @from: the offset to find the correct block | |
721 | * | |
722 | * Returns 1 if block is bad, 0 if block is good | |
723 | */ | |
724 | static int doc_block_isbad(struct mtd_info *mtd, loff_t from) | |
725 | { | |
726 | struct docg3 *docg3 = mtd->priv; | |
727 | int block0, block1, page, ofs, is_good; | |
728 | ||
729 | calc_block_sector(from, &block0, &block1, &page, &ofs); | |
730 | doc_dbg("doc_block_isbad(from=%lld) => block=(%d,%d), page=%d, ofs=%d\n", | |
731 | from, block0, block1, page, ofs); | |
732 | ||
733 | if (block0 < DOC_LAYOUT_BLOCK_FIRST_DATA) | |
734 | return 0; | |
735 | if (block1 > docg3->max_block) | |
736 | return -EINVAL; | |
737 | ||
738 | is_good = docg3->bbt[block0 >> 3] & (1 << (block0 & 0x7)); | |
739 | return !is_good; | |
740 | } | |
741 | ||
742 | /** | |
743 | * doc_get_erase_count - Get block erase count | |
744 | * @docg3: the device | |
745 | * @from: the offset in which the block is. | |
746 | * | |
747 | * Get the number of times a block was erased. The number is the maximum of | |
748 | * erase times between first and second plane (which should be equal normally). | |
749 | * | |
750 | * Returns The number of erases, or -EINVAL or -EIO on error. | |
751 | */ | |
752 | static int doc_get_erase_count(struct docg3 *docg3, loff_t from) | |
753 | { | |
754 | u8 buf[DOC_LAYOUT_WEAR_SIZE]; | |
755 | int ret, plane1_erase_count, plane2_erase_count; | |
756 | int block0, block1, page, ofs; | |
757 | ||
758 | doc_dbg("doc_get_erase_count(from=%lld, buf=%p)\n", from, buf); | |
759 | if (from % DOC_LAYOUT_PAGE_SIZE) | |
760 | return -EINVAL; | |
761 | calc_block_sector(from, &block0, &block1, &page, &ofs); | |
762 | if (block1 > docg3->max_block) | |
763 | return -EINVAL; | |
764 | ||
765 | ret = doc_reset_seq(docg3); | |
766 | if (!ret) | |
767 | ret = doc_read_page_prepare(docg3, block0, block1, page, | |
768 | ofs + DOC_LAYOUT_WEAR_OFFSET); | |
769 | if (!ret) | |
770 | ret = doc_read_page_getbytes(docg3, DOC_LAYOUT_WEAR_SIZE, | |
771 | buf, 1); | |
772 | doc_read_page_finish(docg3); | |
773 | ||
774 | if (ret || (buf[0] != DOC_ERASE_MARK) || (buf[2] != DOC_ERASE_MARK)) | |
775 | return -EIO; | |
776 | plane1_erase_count = (u8)(~buf[1]) | ((u8)(~buf[4]) << 8) | |
777 | | ((u8)(~buf[5]) << 16); | |
778 | plane2_erase_count = (u8)(~buf[3]) | ((u8)(~buf[6]) << 8) | |
779 | | ((u8)(~buf[7]) << 16); | |
780 | ||
781 | return max(plane1_erase_count, plane2_erase_count); | |
782 | } | |
783 | ||
784 | /* | |
785 | * Debug sysfs entries | |
786 | */ | |
787 | static int dbg_flashctrl_show(struct seq_file *s, void *p) | |
788 | { | |
789 | struct docg3 *docg3 = (struct docg3 *)s->private; | |
790 | ||
791 | int pos = 0; | |
792 | u8 fctrl = doc_register_readb(docg3, DOC_FLASHCONTROL); | |
793 | ||
794 | pos += seq_printf(s, | |
795 | "FlashControl : 0x%02x (%s,CE# %s,%s,%s,flash %s)\n", | |
796 | fctrl, | |
797 | fctrl & DOC_CTRL_VIOLATION ? "protocol violation" : "-", | |
798 | fctrl & DOC_CTRL_CE ? "active" : "inactive", | |
799 | fctrl & DOC_CTRL_PROTECTION_ERROR ? "protection error" : "-", | |
800 | fctrl & DOC_CTRL_SEQUENCE_ERROR ? "sequence error" : "-", | |
801 | fctrl & DOC_CTRL_FLASHREADY ? "ready" : "not ready"); | |
802 | return pos; | |
803 | } | |
804 | DEBUGFS_RO_ATTR(flashcontrol, dbg_flashctrl_show); | |
805 | ||
806 | static int dbg_asicmode_show(struct seq_file *s, void *p) | |
807 | { | |
808 | struct docg3 *docg3 = (struct docg3 *)s->private; | |
809 | ||
810 | int pos = 0; | |
811 | int pctrl = doc_register_readb(docg3, DOC_ASICMODE); | |
812 | int mode = pctrl & 0x03; | |
813 | ||
814 | pos += seq_printf(s, | |
815 | "%04x : RAM_WE=%d,RSTIN_RESET=%d,BDETCT_RESET=%d,WRITE_ENABLE=%d,POWERDOWN=%d,MODE=%d%d (", | |
816 | pctrl, | |
817 | pctrl & DOC_ASICMODE_RAM_WE ? 1 : 0, | |
818 | pctrl & DOC_ASICMODE_RSTIN_RESET ? 1 : 0, | |
819 | pctrl & DOC_ASICMODE_BDETCT_RESET ? 1 : 0, | |
820 | pctrl & DOC_ASICMODE_MDWREN ? 1 : 0, | |
821 | pctrl & DOC_ASICMODE_POWERDOWN ? 1 : 0, | |
822 | mode >> 1, mode & 0x1); | |
823 | ||
824 | switch (mode) { | |
825 | case DOC_ASICMODE_RESET: | |
826 | pos += seq_printf(s, "reset"); | |
827 | break; | |
828 | case DOC_ASICMODE_NORMAL: | |
829 | pos += seq_printf(s, "normal"); | |
830 | break; | |
831 | case DOC_ASICMODE_POWERDOWN: | |
832 | pos += seq_printf(s, "powerdown"); | |
833 | break; | |
834 | } | |
835 | pos += seq_printf(s, ")\n"); | |
836 | return pos; | |
837 | } | |
838 | DEBUGFS_RO_ATTR(asic_mode, dbg_asicmode_show); | |
839 | ||
840 | static int dbg_device_id_show(struct seq_file *s, void *p) | |
841 | { | |
842 | struct docg3 *docg3 = (struct docg3 *)s->private; | |
843 | int pos = 0; | |
844 | int id = doc_register_readb(docg3, DOC_DEVICESELECT); | |
845 | ||
846 | pos += seq_printf(s, "DeviceId = %d\n", id); | |
847 | return pos; | |
848 | } | |
849 | DEBUGFS_RO_ATTR(device_id, dbg_device_id_show); | |
850 | ||
851 | static int dbg_protection_show(struct seq_file *s, void *p) | |
852 | { | |
853 | struct docg3 *docg3 = (struct docg3 *)s->private; | |
854 | int pos = 0; | |
855 | int protect = doc_register_readb(docg3, DOC_PROTECTION); | |
856 | int dps0 = doc_register_readb(docg3, DOC_DPS0_STATUS); | |
857 | int dps0_low = doc_register_readb(docg3, DOC_DPS0_ADDRLOW); | |
858 | int dps0_high = doc_register_readb(docg3, DOC_DPS0_ADDRHIGH); | |
859 | int dps1 = doc_register_readb(docg3, DOC_DPS1_STATUS); | |
860 | int dps1_low = doc_register_readb(docg3, DOC_DPS1_ADDRLOW); | |
861 | int dps1_high = doc_register_readb(docg3, DOC_DPS1_ADDRHIGH); | |
862 | ||
863 | pos += seq_printf(s, "Protection = 0x%02x (", | |
864 | protect); | |
865 | if (protect & DOC_PROTECT_FOUNDRY_OTP_LOCK) | |
866 | pos += seq_printf(s, "FOUNDRY_OTP_LOCK,"); | |
867 | if (protect & DOC_PROTECT_CUSTOMER_OTP_LOCK) | |
868 | pos += seq_printf(s, "CUSTOMER_OTP_LOCK,"); | |
869 | if (protect & DOC_PROTECT_LOCK_INPUT) | |
870 | pos += seq_printf(s, "LOCK_INPUT,"); | |
871 | if (protect & DOC_PROTECT_STICKY_LOCK) | |
872 | pos += seq_printf(s, "STICKY_LOCK,"); | |
873 | if (protect & DOC_PROTECT_PROTECTION_ENABLED) | |
874 | pos += seq_printf(s, "PROTECTION ON,"); | |
875 | if (protect & DOC_PROTECT_IPL_DOWNLOAD_LOCK) | |
876 | pos += seq_printf(s, "IPL_DOWNLOAD_LOCK,"); | |
877 | if (protect & DOC_PROTECT_PROTECTION_ERROR) | |
878 | pos += seq_printf(s, "PROTECT_ERR,"); | |
879 | else | |
880 | pos += seq_printf(s, "NO_PROTECT_ERR"); | |
881 | pos += seq_printf(s, ")\n"); | |
882 | ||
883 | pos += seq_printf(s, "DPS0 = 0x%02x : " | |
884 | "Protected area [0x%x - 0x%x] : OTP=%d, READ=%d, " | |
885 | "WRITE=%d, HW_LOCK=%d, KEY_OK=%d\n", | |
886 | dps0, dps0_low, dps0_high, | |
887 | !!(dps0 & DOC_DPS_OTP_PROTECTED), | |
888 | !!(dps0 & DOC_DPS_READ_PROTECTED), | |
889 | !!(dps0 & DOC_DPS_WRITE_PROTECTED), | |
890 | !!(dps0 & DOC_DPS_HW_LOCK_ENABLED), | |
891 | !!(dps0 & DOC_DPS_KEY_OK)); | |
892 | pos += seq_printf(s, "DPS1 = 0x%02x : " | |
893 | "Protected area [0x%x - 0x%x] : OTP=%d, READ=%d, " | |
894 | "WRITE=%d, HW_LOCK=%d, KEY_OK=%d\n", | |
895 | dps1, dps1_low, dps1_high, | |
896 | !!(dps1 & DOC_DPS_OTP_PROTECTED), | |
897 | !!(dps1 & DOC_DPS_READ_PROTECTED), | |
898 | !!(dps1 & DOC_DPS_WRITE_PROTECTED), | |
899 | !!(dps1 & DOC_DPS_HW_LOCK_ENABLED), | |
900 | !!(dps1 & DOC_DPS_KEY_OK)); | |
901 | return pos; | |
902 | } | |
903 | DEBUGFS_RO_ATTR(protection, dbg_protection_show); | |
904 | ||
905 | static int __init doc_dbg_register(struct docg3 *docg3) | |
906 | { | |
907 | struct dentry *root, *entry; | |
908 | ||
909 | root = debugfs_create_dir("docg3", NULL); | |
910 | if (!root) | |
911 | return -ENOMEM; | |
912 | ||
913 | entry = debugfs_create_file("flashcontrol", S_IRUSR, root, docg3, | |
914 | &flashcontrol_fops); | |
915 | if (entry) | |
916 | entry = debugfs_create_file("asic_mode", S_IRUSR, root, | |
917 | docg3, &asic_mode_fops); | |
918 | if (entry) | |
919 | entry = debugfs_create_file("device_id", S_IRUSR, root, | |
920 | docg3, &device_id_fops); | |
921 | if (entry) | |
922 | entry = debugfs_create_file("protection", S_IRUSR, root, | |
923 | docg3, &protection_fops); | |
924 | if (entry) { | |
925 | docg3->debugfs_root = root; | |
926 | return 0; | |
927 | } else { | |
928 | debugfs_remove_recursive(root); | |
929 | return -ENOMEM; | |
930 | } | |
931 | } | |
932 | ||
933 | static void __exit doc_dbg_unregister(struct docg3 *docg3) | |
934 | { | |
935 | debugfs_remove_recursive(docg3->debugfs_root); | |
936 | } | |
937 | ||
938 | /** | |
939 | * doc_set_driver_info - Fill the mtd_info structure and docg3 structure | |
940 | * @chip_id: The chip ID of the supported chip | |
941 | * @mtd: The structure to fill | |
942 | */ | |
943 | static void __init doc_set_driver_info(int chip_id, struct mtd_info *mtd) | |
944 | { | |
945 | struct docg3 *docg3 = mtd->priv; | |
946 | int cfg; | |
947 | ||
948 | cfg = doc_register_readb(docg3, DOC_CONFIGURATION); | |
949 | docg3->if_cfg = (cfg & DOC_CONF_IF_CFG ? 1 : 0); | |
950 | ||
951 | switch (chip_id) { | |
952 | case DOC_CHIPID_G3: | |
953 | mtd->name = "DiskOnChip G3"; | |
954 | docg3->max_block = 2047; | |
955 | break; | |
956 | } | |
957 | mtd->type = MTD_NANDFLASH; | |
958 | /* | |
959 | * Once write methods are added, the correct flags will be set. | |
960 | * mtd->flags = MTD_CAP_NANDFLASH; | |
961 | */ | |
962 | mtd->flags = MTD_CAP_ROM; | |
963 | mtd->size = (docg3->max_block + 1) * DOC_LAYOUT_BLOCK_SIZE; | |
964 | mtd->erasesize = DOC_LAYOUT_BLOCK_SIZE * DOC_LAYOUT_NBPLANES; | |
965 | mtd->writesize = DOC_LAYOUT_PAGE_SIZE; | |
966 | mtd->oobsize = DOC_LAYOUT_OOB_SIZE; | |
967 | mtd->owner = THIS_MODULE; | |
968 | mtd->erase = NULL; | |
969 | mtd->point = NULL; | |
970 | mtd->unpoint = NULL; | |
971 | mtd->read = doc_read; | |
972 | mtd->write = NULL; | |
973 | mtd->read_oob = doc_read_oob; | |
974 | mtd->write_oob = NULL; | |
975 | mtd->sync = NULL; | |
976 | mtd->block_isbad = doc_block_isbad; | |
977 | } | |
978 | ||
979 | /** | |
980 | * doc_probe - Probe the IO space for a DiskOnChip G3 chip | |
981 | * @pdev: platform device | |
982 | * | |
983 | * Probes for a G3 chip at the specified IO space in the platform data | |
984 | * ressources. | |
985 | * | |
986 | * Returns 0 on success, -ENOMEM, -ENXIO on error | |
987 | */ | |
988 | static int __init docg3_probe(struct platform_device *pdev) | |
989 | { | |
990 | struct device *dev = &pdev->dev; | |
991 | struct docg3 *docg3; | |
992 | struct mtd_info *mtd; | |
993 | struct resource *ress; | |
994 | int ret, bbt_nbpages; | |
995 | u16 chip_id, chip_id_inv; | |
996 | ||
997 | ret = -ENOMEM; | |
998 | docg3 = kzalloc(sizeof(struct docg3), GFP_KERNEL); | |
999 | if (!docg3) | |
1000 | goto nomem1; | |
1001 | mtd = kzalloc(sizeof(struct mtd_info), GFP_KERNEL); | |
1002 | if (!mtd) | |
1003 | goto nomem2; | |
1004 | mtd->priv = docg3; | |
1005 | ||
1006 | ret = -ENXIO; | |
1007 | ress = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
1008 | if (!ress) { | |
1009 | dev_err(dev, "No I/O memory resource defined\n"); | |
1010 | goto noress; | |
1011 | } | |
1012 | docg3->base = ioremap(ress->start, DOC_IOSPACE_SIZE); | |
1013 | ||
1014 | docg3->dev = &pdev->dev; | |
1015 | docg3->device_id = 0; | |
1016 | doc_set_device_id(docg3, docg3->device_id); | |
1017 | doc_set_asic_mode(docg3, DOC_ASICMODE_RESET); | |
1018 | doc_set_asic_mode(docg3, DOC_ASICMODE_NORMAL); | |
1019 | ||
1020 | chip_id = doc_register_readw(docg3, DOC_CHIPID); | |
1021 | chip_id_inv = doc_register_readw(docg3, DOC_CHIPID_INV); | |
1022 | ||
1023 | ret = -ENODEV; | |
1024 | if (chip_id != (u16)(~chip_id_inv)) { | |
1025 | doc_info("No device found at IO addr %p\n", | |
1026 | (void *)ress->start); | |
1027 | goto nochipfound; | |
1028 | } | |
1029 | ||
1030 | switch (chip_id) { | |
1031 | case DOC_CHIPID_G3: | |
1032 | doc_info("Found a G3 DiskOnChip at addr %p\n", | |
1033 | (void *)ress->start); | |
1034 | break; | |
1035 | default: | |
1036 | doc_err("Chip id %04x is not a DiskOnChip G3 chip\n", chip_id); | |
1037 | goto nochipfound; | |
1038 | } | |
1039 | ||
1040 | doc_set_driver_info(chip_id, mtd); | |
1041 | platform_set_drvdata(pdev, mtd); | |
1042 | ||
1043 | ret = -ENOMEM; | |
1044 | bbt_nbpages = DIV_ROUND_UP(docg3->max_block + 1, | |
1045 | 8 * DOC_LAYOUT_PAGE_SIZE); | |
1046 | docg3->bbt = kzalloc(bbt_nbpages * DOC_LAYOUT_PAGE_SIZE, GFP_KERNEL); | |
1047 | if (!docg3->bbt) | |
1048 | goto nochipfound; | |
1049 | doc_reload_bbt(docg3); | |
1050 | ||
1051 | ret = mtd_device_parse_register(mtd, part_probes, | |
1052 | NULL, NULL, 0); | |
1053 | if (ret) | |
1054 | goto register_error; | |
1055 | ||
1056 | doc_dbg_register(docg3); | |
1057 | return 0; | |
1058 | ||
1059 | register_error: | |
1060 | kfree(docg3->bbt); | |
1061 | nochipfound: | |
1062 | iounmap(docg3->base); | |
1063 | noress: | |
1064 | kfree(mtd); | |
1065 | nomem2: | |
1066 | kfree(docg3); | |
1067 | nomem1: | |
1068 | return ret; | |
1069 | } | |
1070 | ||
1071 | /** | |
1072 | * docg3_release - Release the driver | |
1073 | * @pdev: the platform device | |
1074 | * | |
1075 | * Returns 0 | |
1076 | */ | |
1077 | static int __exit docg3_release(struct platform_device *pdev) | |
1078 | { | |
1079 | struct mtd_info *mtd = platform_get_drvdata(pdev); | |
1080 | struct docg3 *docg3 = mtd->priv; | |
1081 | ||
1082 | doc_dbg_unregister(docg3); | |
1083 | mtd_device_unregister(mtd); | |
1084 | iounmap(docg3->base); | |
1085 | kfree(docg3->bbt); | |
1086 | kfree(docg3); | |
1087 | kfree(mtd); | |
1088 | return 0; | |
1089 | } | |
1090 | ||
1091 | static struct platform_driver g3_driver = { | |
1092 | .driver = { | |
1093 | .name = "docg3", | |
1094 | .owner = THIS_MODULE, | |
1095 | }, | |
1096 | .remove = __exit_p(docg3_release), | |
1097 | }; | |
1098 | ||
1099 | static int __init docg3_init(void) | |
1100 | { | |
1101 | return platform_driver_probe(&g3_driver, docg3_probe); | |
1102 | } | |
1103 | module_init(docg3_init); | |
1104 | ||
1105 | ||
1106 | static void __exit docg3_exit(void) | |
1107 | { | |
1108 | platform_driver_unregister(&g3_driver); | |
1109 | } | |
1110 | module_exit(docg3_exit); | |
1111 | ||
1112 | MODULE_LICENSE("GPL"); | |
1113 | MODULE_AUTHOR("Robert Jarzmik <robert.jarzmik@free.fr>"); | |
1114 | MODULE_DESCRIPTION("MTD driver for DiskOnChip G3"); |