Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * drivers/mtd/nand.c | |
3 | * | |
4 | * Overview: | |
5 | * This is the generic MTD driver for NAND flash devices. It should be | |
6 | * capable of working with almost all NAND chips currently available. | |
7 | * Basic support for AG-AND chips is provided. | |
61b03bd7 | 8 | * |
1da177e4 | 9 | * Additional technical information is available on |
8b2b403c | 10 | * http://www.linux-mtd.infradead.org/doc/nand.html |
61b03bd7 | 11 | * |
1da177e4 | 12 | * Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com) |
ace4dfee | 13 | * 2002-2006 Thomas Gleixner (tglx@linutronix.de) |
1da177e4 | 14 | * |
ace4dfee | 15 | * Credits: |
61b03bd7 TG |
16 | * David Woodhouse for adding multichip support |
17 | * | |
1da177e4 LT |
18 | * Aleph One Ltd. and Toby Churchill Ltd. for supporting the |
19 | * rework for 2K page size chips | |
20 | * | |
ace4dfee | 21 | * TODO: |
1da177e4 LT |
22 | * Enable cached programming for 2k page size chips |
23 | * Check, if mtd->ecctype should be set to MTD_ECC_HW | |
7854d3f7 | 24 | * if we have HW ECC support. |
1da177e4 LT |
25 | * The AG-AND chips have nice features for speed improvement, |
26 | * which are not supported yet. Read / program 4 pages in one go. | |
c0b8ba7b | 27 | * BBT table is not serialized, has to be fixed |
1da177e4 | 28 | * |
1da177e4 LT |
29 | * This program is free software; you can redistribute it and/or modify |
30 | * it under the terms of the GNU General Public License version 2 as | |
31 | * published by the Free Software Foundation. | |
32 | * | |
33 | */ | |
34 | ||
552d9205 | 35 | #include <linux/module.h> |
1da177e4 LT |
36 | #include <linux/delay.h> |
37 | #include <linux/errno.h> | |
7aa65bfd | 38 | #include <linux/err.h> |
1da177e4 LT |
39 | #include <linux/sched.h> |
40 | #include <linux/slab.h> | |
41 | #include <linux/types.h> | |
42 | #include <linux/mtd/mtd.h> | |
43 | #include <linux/mtd/nand.h> | |
44 | #include <linux/mtd/nand_ecc.h> | |
193bd400 | 45 | #include <linux/mtd/nand_bch.h> |
1da177e4 LT |
46 | #include <linux/interrupt.h> |
47 | #include <linux/bitops.h> | |
8fe833c1 | 48 | #include <linux/leds.h> |
7351d3a5 | 49 | #include <linux/io.h> |
1da177e4 | 50 | #include <linux/mtd/partitions.h> |
1da177e4 LT |
51 | |
52 | /* Define default oob placement schemes for large and small page devices */ | |
5bd34c09 | 53 | static struct nand_ecclayout nand_oob_8 = { |
1da177e4 LT |
54 | .eccbytes = 3, |
55 | .eccpos = {0, 1, 2}, | |
5bd34c09 TG |
56 | .oobfree = { |
57 | {.offset = 3, | |
58 | .length = 2}, | |
59 | {.offset = 6, | |
f8ac0414 | 60 | .length = 2} } |
1da177e4 LT |
61 | }; |
62 | ||
5bd34c09 | 63 | static struct nand_ecclayout nand_oob_16 = { |
1da177e4 LT |
64 | .eccbytes = 6, |
65 | .eccpos = {0, 1, 2, 3, 6, 7}, | |
5bd34c09 TG |
66 | .oobfree = { |
67 | {.offset = 8, | |
f8ac0414 | 68 | . length = 8} } |
1da177e4 LT |
69 | }; |
70 | ||
5bd34c09 | 71 | static struct nand_ecclayout nand_oob_64 = { |
1da177e4 LT |
72 | .eccbytes = 24, |
73 | .eccpos = { | |
e0c7d767 DW |
74 | 40, 41, 42, 43, 44, 45, 46, 47, |
75 | 48, 49, 50, 51, 52, 53, 54, 55, | |
76 | 56, 57, 58, 59, 60, 61, 62, 63}, | |
5bd34c09 TG |
77 | .oobfree = { |
78 | {.offset = 2, | |
f8ac0414 | 79 | .length = 38} } |
1da177e4 LT |
80 | }; |
81 | ||
81ec5364 TG |
82 | static struct nand_ecclayout nand_oob_128 = { |
83 | .eccbytes = 48, | |
84 | .eccpos = { | |
85 | 80, 81, 82, 83, 84, 85, 86, 87, | |
86 | 88, 89, 90, 91, 92, 93, 94, 95, | |
87 | 96, 97, 98, 99, 100, 101, 102, 103, | |
88 | 104, 105, 106, 107, 108, 109, 110, 111, | |
89 | 112, 113, 114, 115, 116, 117, 118, 119, | |
90 | 120, 121, 122, 123, 124, 125, 126, 127}, | |
91 | .oobfree = { | |
92 | {.offset = 2, | |
f8ac0414 | 93 | .length = 78} } |
81ec5364 TG |
94 | }; |
95 | ||
ace4dfee | 96 | static int nand_get_device(struct nand_chip *chip, struct mtd_info *mtd, |
2c0a2bed | 97 | int new_state); |
1da177e4 | 98 | |
8593fbc6 TG |
99 | static int nand_do_write_oob(struct mtd_info *mtd, loff_t to, |
100 | struct mtd_oob_ops *ops); | |
101 | ||
d470a97c | 102 | /* |
8e87d782 | 103 | * For devices which display every fart in the system on a separate LED. Is |
d470a97c TG |
104 | * compiled away when LED support is disabled. |
105 | */ | |
106 | DEFINE_LED_TRIGGER(nand_led_trigger); | |
107 | ||
6fe5a6ac VS |
108 | static int check_offs_len(struct mtd_info *mtd, |
109 | loff_t ofs, uint64_t len) | |
110 | { | |
111 | struct nand_chip *chip = mtd->priv; | |
112 | int ret = 0; | |
113 | ||
114 | /* Start address must align on block boundary */ | |
115 | if (ofs & ((1 << chip->phys_erase_shift) - 1)) { | |
116 | DEBUG(MTD_DEBUG_LEVEL0, "%s: Unaligned address\n", __func__); | |
117 | ret = -EINVAL; | |
118 | } | |
119 | ||
120 | /* Length must align on block boundary */ | |
121 | if (len & ((1 << chip->phys_erase_shift) - 1)) { | |
122 | DEBUG(MTD_DEBUG_LEVEL0, "%s: Length not block aligned\n", | |
123 | __func__); | |
124 | ret = -EINVAL; | |
125 | } | |
126 | ||
127 | /* Do not allow past end of device */ | |
128 | if (ofs + len > mtd->size) { | |
129 | DEBUG(MTD_DEBUG_LEVEL0, "%s: Past end of device\n", | |
130 | __func__); | |
131 | ret = -EINVAL; | |
132 | } | |
133 | ||
134 | return ret; | |
135 | } | |
136 | ||
1da177e4 LT |
137 | /** |
138 | * nand_release_device - [GENERIC] release chip | |
8b6e50c9 | 139 | * @mtd: MTD device structure |
61b03bd7 | 140 | * |
8b6e50c9 | 141 | * Deselect, release chip lock and wake up anyone waiting on the device. |
1da177e4 | 142 | */ |
e0c7d767 | 143 | static void nand_release_device(struct mtd_info *mtd) |
1da177e4 | 144 | { |
ace4dfee | 145 | struct nand_chip *chip = mtd->priv; |
1da177e4 LT |
146 | |
147 | /* De-select the NAND device */ | |
ace4dfee | 148 | chip->select_chip(mtd, -1); |
0dfc6246 | 149 | |
a36ed299 | 150 | /* Release the controller and the chip */ |
ace4dfee TG |
151 | spin_lock(&chip->controller->lock); |
152 | chip->controller->active = NULL; | |
153 | chip->state = FL_READY; | |
154 | wake_up(&chip->controller->wq); | |
155 | spin_unlock(&chip->controller->lock); | |
1da177e4 LT |
156 | } |
157 | ||
158 | /** | |
159 | * nand_read_byte - [DEFAULT] read one byte from the chip | |
8b6e50c9 | 160 | * @mtd: MTD device structure |
1da177e4 | 161 | * |
7854d3f7 | 162 | * Default read function for 8bit buswidth |
1da177e4 | 163 | */ |
58dd8f2b | 164 | static uint8_t nand_read_byte(struct mtd_info *mtd) |
1da177e4 | 165 | { |
ace4dfee TG |
166 | struct nand_chip *chip = mtd->priv; |
167 | return readb(chip->IO_ADDR_R); | |
1da177e4 LT |
168 | } |
169 | ||
1da177e4 LT |
170 | /** |
171 | * nand_read_byte16 - [DEFAULT] read one byte endianess aware from the chip | |
7854d3f7 | 172 | * nand_read_byte16 - [DEFAULT] read one byte endianness aware from the chip |
8b6e50c9 | 173 | * @mtd: MTD device structure |
1da177e4 | 174 | * |
7854d3f7 BN |
175 | * Default read function for 16bit buswidth with endianness conversion. |
176 | * | |
1da177e4 | 177 | */ |
58dd8f2b | 178 | static uint8_t nand_read_byte16(struct mtd_info *mtd) |
1da177e4 | 179 | { |
ace4dfee TG |
180 | struct nand_chip *chip = mtd->priv; |
181 | return (uint8_t) cpu_to_le16(readw(chip->IO_ADDR_R)); | |
1da177e4 LT |
182 | } |
183 | ||
1da177e4 LT |
184 | /** |
185 | * nand_read_word - [DEFAULT] read one word from the chip | |
8b6e50c9 | 186 | * @mtd: MTD device structure |
1da177e4 | 187 | * |
7854d3f7 | 188 | * Default read function for 16bit buswidth without endianness conversion. |
1da177e4 LT |
189 | */ |
190 | static u16 nand_read_word(struct mtd_info *mtd) | |
191 | { | |
ace4dfee TG |
192 | struct nand_chip *chip = mtd->priv; |
193 | return readw(chip->IO_ADDR_R); | |
1da177e4 LT |
194 | } |
195 | ||
1da177e4 LT |
196 | /** |
197 | * nand_select_chip - [DEFAULT] control CE line | |
8b6e50c9 BN |
198 | * @mtd: MTD device structure |
199 | * @chipnr: chipnumber to select, -1 for deselect | |
1da177e4 LT |
200 | * |
201 | * Default select function for 1 chip devices. | |
202 | */ | |
ace4dfee | 203 | static void nand_select_chip(struct mtd_info *mtd, int chipnr) |
1da177e4 | 204 | { |
ace4dfee TG |
205 | struct nand_chip *chip = mtd->priv; |
206 | ||
207 | switch (chipnr) { | |
1da177e4 | 208 | case -1: |
ace4dfee | 209 | chip->cmd_ctrl(mtd, NAND_CMD_NONE, 0 | NAND_CTRL_CHANGE); |
1da177e4 LT |
210 | break; |
211 | case 0: | |
1da177e4 LT |
212 | break; |
213 | ||
214 | default: | |
215 | BUG(); | |
216 | } | |
217 | } | |
218 | ||
219 | /** | |
220 | * nand_write_buf - [DEFAULT] write buffer to chip | |
8b6e50c9 BN |
221 | * @mtd: MTD device structure |
222 | * @buf: data buffer | |
223 | * @len: number of bytes to write | |
1da177e4 | 224 | * |
7854d3f7 | 225 | * Default write function for 8bit buswidth. |
1da177e4 | 226 | */ |
58dd8f2b | 227 | static void nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len) |
1da177e4 LT |
228 | { |
229 | int i; | |
ace4dfee | 230 | struct nand_chip *chip = mtd->priv; |
1da177e4 | 231 | |
e0c7d767 | 232 | for (i = 0; i < len; i++) |
ace4dfee | 233 | writeb(buf[i], chip->IO_ADDR_W); |
1da177e4 LT |
234 | } |
235 | ||
236 | /** | |
61b03bd7 | 237 | * nand_read_buf - [DEFAULT] read chip data into buffer |
8b6e50c9 BN |
238 | * @mtd: MTD device structure |
239 | * @buf: buffer to store date | |
240 | * @len: number of bytes to read | |
1da177e4 | 241 | * |
7854d3f7 | 242 | * Default read function for 8bit buswidth. |
1da177e4 | 243 | */ |
58dd8f2b | 244 | static void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) |
1da177e4 LT |
245 | { |
246 | int i; | |
ace4dfee | 247 | struct nand_chip *chip = mtd->priv; |
1da177e4 | 248 | |
e0c7d767 | 249 | for (i = 0; i < len; i++) |
ace4dfee | 250 | buf[i] = readb(chip->IO_ADDR_R); |
1da177e4 LT |
251 | } |
252 | ||
253 | /** | |
61b03bd7 | 254 | * nand_verify_buf - [DEFAULT] Verify chip data against buffer |
8b6e50c9 BN |
255 | * @mtd: MTD device structure |
256 | * @buf: buffer containing the data to compare | |
257 | * @len: number of bytes to compare | |
1da177e4 | 258 | * |
7854d3f7 | 259 | * Default verify function for 8bit buswidth. |
1da177e4 | 260 | */ |
58dd8f2b | 261 | static int nand_verify_buf(struct mtd_info *mtd, const uint8_t *buf, int len) |
1da177e4 LT |
262 | { |
263 | int i; | |
ace4dfee | 264 | struct nand_chip *chip = mtd->priv; |
1da177e4 | 265 | |
e0c7d767 | 266 | for (i = 0; i < len; i++) |
ace4dfee | 267 | if (buf[i] != readb(chip->IO_ADDR_R)) |
1da177e4 | 268 | return -EFAULT; |
1da177e4 LT |
269 | return 0; |
270 | } | |
271 | ||
272 | /** | |
273 | * nand_write_buf16 - [DEFAULT] write buffer to chip | |
8b6e50c9 BN |
274 | * @mtd: MTD device structure |
275 | * @buf: data buffer | |
276 | * @len: number of bytes to write | |
1da177e4 | 277 | * |
7854d3f7 | 278 | * Default write function for 16bit buswidth. |
1da177e4 | 279 | */ |
58dd8f2b | 280 | static void nand_write_buf16(struct mtd_info *mtd, const uint8_t *buf, int len) |
1da177e4 LT |
281 | { |
282 | int i; | |
ace4dfee | 283 | struct nand_chip *chip = mtd->priv; |
1da177e4 LT |
284 | u16 *p = (u16 *) buf; |
285 | len >>= 1; | |
61b03bd7 | 286 | |
e0c7d767 | 287 | for (i = 0; i < len; i++) |
ace4dfee | 288 | writew(p[i], chip->IO_ADDR_W); |
61b03bd7 | 289 | |
1da177e4 LT |
290 | } |
291 | ||
292 | /** | |
61b03bd7 | 293 | * nand_read_buf16 - [DEFAULT] read chip data into buffer |
8b6e50c9 BN |
294 | * @mtd: MTD device structure |
295 | * @buf: buffer to store date | |
296 | * @len: number of bytes to read | |
1da177e4 | 297 | * |
7854d3f7 | 298 | * Default read function for 16bit buswidth. |
1da177e4 | 299 | */ |
58dd8f2b | 300 | static void nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len) |
1da177e4 LT |
301 | { |
302 | int i; | |
ace4dfee | 303 | struct nand_chip *chip = mtd->priv; |
1da177e4 LT |
304 | u16 *p = (u16 *) buf; |
305 | len >>= 1; | |
306 | ||
e0c7d767 | 307 | for (i = 0; i < len; i++) |
ace4dfee | 308 | p[i] = readw(chip->IO_ADDR_R); |
1da177e4 LT |
309 | } |
310 | ||
311 | /** | |
61b03bd7 | 312 | * nand_verify_buf16 - [DEFAULT] Verify chip data against buffer |
8b6e50c9 BN |
313 | * @mtd: MTD device structure |
314 | * @buf: buffer containing the data to compare | |
315 | * @len: number of bytes to compare | |
1da177e4 | 316 | * |
7854d3f7 | 317 | * Default verify function for 16bit buswidth. |
1da177e4 | 318 | */ |
58dd8f2b | 319 | static int nand_verify_buf16(struct mtd_info *mtd, const uint8_t *buf, int len) |
1da177e4 LT |
320 | { |
321 | int i; | |
ace4dfee | 322 | struct nand_chip *chip = mtd->priv; |
1da177e4 LT |
323 | u16 *p = (u16 *) buf; |
324 | len >>= 1; | |
325 | ||
e0c7d767 | 326 | for (i = 0; i < len; i++) |
ace4dfee | 327 | if (p[i] != readw(chip->IO_ADDR_R)) |
1da177e4 LT |
328 | return -EFAULT; |
329 | ||
330 | return 0; | |
331 | } | |
332 | ||
333 | /** | |
334 | * nand_block_bad - [DEFAULT] Read bad block marker from the chip | |
8b6e50c9 BN |
335 | * @mtd: MTD device structure |
336 | * @ofs: offset from device start | |
337 | * @getchip: 0, if the chip is already selected | |
1da177e4 | 338 | * |
61b03bd7 | 339 | * Check, if the block is bad. |
1da177e4 LT |
340 | */ |
341 | static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip) | |
342 | { | |
343 | int page, chipnr, res = 0; | |
ace4dfee | 344 | struct nand_chip *chip = mtd->priv; |
1da177e4 LT |
345 | u16 bad; |
346 | ||
5fb1549d | 347 | if (chip->bbt_options & NAND_BBT_SCANLASTPAGE) |
b60b08b0 KC |
348 | ofs += mtd->erasesize - mtd->writesize; |
349 | ||
1a12f46a TK |
350 | page = (int)(ofs >> chip->page_shift) & chip->pagemask; |
351 | ||
1da177e4 | 352 | if (getchip) { |
ace4dfee | 353 | chipnr = (int)(ofs >> chip->chip_shift); |
1da177e4 | 354 | |
ace4dfee | 355 | nand_get_device(chip, mtd, FL_READING); |
1da177e4 LT |
356 | |
357 | /* Select the NAND device */ | |
ace4dfee | 358 | chip->select_chip(mtd, chipnr); |
1a12f46a | 359 | } |
1da177e4 | 360 | |
ace4dfee TG |
361 | if (chip->options & NAND_BUSWIDTH_16) { |
362 | chip->cmdfunc(mtd, NAND_CMD_READOOB, chip->badblockpos & 0xFE, | |
1a12f46a | 363 | page); |
ace4dfee TG |
364 | bad = cpu_to_le16(chip->read_word(mtd)); |
365 | if (chip->badblockpos & 0x1) | |
49196f33 | 366 | bad >>= 8; |
e0b58d0a ML |
367 | else |
368 | bad &= 0xFF; | |
1da177e4 | 369 | } else { |
1a12f46a | 370 | chip->cmdfunc(mtd, NAND_CMD_READOOB, chip->badblockpos, page); |
e0b58d0a | 371 | bad = chip->read_byte(mtd); |
1da177e4 | 372 | } |
61b03bd7 | 373 | |
e0b58d0a ML |
374 | if (likely(chip->badblockbits == 8)) |
375 | res = bad != 0xFF; | |
376 | else | |
377 | res = hweight8(bad) < chip->badblockbits; | |
378 | ||
ace4dfee | 379 | if (getchip) |
1da177e4 | 380 | nand_release_device(mtd); |
61b03bd7 | 381 | |
1da177e4 LT |
382 | return res; |
383 | } | |
384 | ||
385 | /** | |
386 | * nand_default_block_markbad - [DEFAULT] mark a block bad | |
8b6e50c9 BN |
387 | * @mtd: MTD device structure |
388 | * @ofs: offset from device start | |
1da177e4 | 389 | * |
8b6e50c9 BN |
390 | * This is the default implementation, which can be overridden by a hardware |
391 | * specific driver. | |
1da177e4 LT |
392 | */ |
393 | static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs) | |
394 | { | |
ace4dfee | 395 | struct nand_chip *chip = mtd->priv; |
58dd8f2b | 396 | uint8_t buf[2] = { 0, 0 }; |
02ed70bb | 397 | int block, ret, i = 0; |
61b03bd7 | 398 | |
5fb1549d | 399 | if (chip->bbt_options & NAND_BBT_SCANLASTPAGE) |
b60b08b0 KC |
400 | ofs += mtd->erasesize - mtd->writesize; |
401 | ||
1da177e4 | 402 | /* Get block number */ |
4226b510 | 403 | block = (int)(ofs >> chip->bbt_erase_shift); |
ace4dfee TG |
404 | if (chip->bbt) |
405 | chip->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1); | |
1da177e4 | 406 | |
8b6e50c9 | 407 | /* Do we have a flash based bad block table? */ |
bb9ebd4e | 408 | if (chip->bbt_options & NAND_BBT_USE_FLASH) |
f1a28c02 TG |
409 | ret = nand_update_bbt(mtd, ofs); |
410 | else { | |
c0b8ba7b | 411 | nand_get_device(chip, mtd, FL_WRITING); |
f1a28c02 | 412 | |
a0dc5529 BN |
413 | /* |
414 | * Write to first two pages if necessary. If we write to more | |
415 | * than one location, the first error encountered quits the | |
416 | * procedure. We write two bytes per location, so we dont have | |
417 | * to mess with 16 bit access. | |
02ed70bb BN |
418 | */ |
419 | do { | |
420 | chip->ops.len = chip->ops.ooblen = 2; | |
421 | chip->ops.datbuf = NULL; | |
422 | chip->ops.oobbuf = buf; | |
423 | chip->ops.ooboffs = chip->badblockpos & ~0x01; | |
424 | ||
425 | ret = nand_do_write_oob(mtd, ofs, &chip->ops); | |
426 | ||
02ed70bb BN |
427 | i++; |
428 | ofs += mtd->writesize; | |
5fb1549d | 429 | } while (!ret && (chip->bbt_options & NAND_BBT_SCAN2NDPAGE) && |
02ed70bb BN |
430 | i < 2); |
431 | ||
c0b8ba7b | 432 | nand_release_device(mtd); |
f1a28c02 TG |
433 | } |
434 | if (!ret) | |
435 | mtd->ecc_stats.badblocks++; | |
c0b8ba7b | 436 | |
f1a28c02 | 437 | return ret; |
1da177e4 LT |
438 | } |
439 | ||
61b03bd7 | 440 | /** |
1da177e4 | 441 | * nand_check_wp - [GENERIC] check if the chip is write protected |
8b6e50c9 | 442 | * @mtd: MTD device structure |
1da177e4 | 443 | * |
8b6e50c9 BN |
444 | * Check, if the device is write protected. The function expects, that the |
445 | * device is already selected. | |
1da177e4 | 446 | */ |
e0c7d767 | 447 | static int nand_check_wp(struct mtd_info *mtd) |
1da177e4 | 448 | { |
ace4dfee | 449 | struct nand_chip *chip = mtd->priv; |
93edbad6 | 450 | |
8b6e50c9 | 451 | /* Broken xD cards report WP despite being writable */ |
93edbad6 ML |
452 | if (chip->options & NAND_BROKEN_XD) |
453 | return 0; | |
454 | ||
1da177e4 | 455 | /* Check the WP bit */ |
ace4dfee TG |
456 | chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1); |
457 | return (chip->read_byte(mtd) & NAND_STATUS_WP) ? 0 : 1; | |
1da177e4 LT |
458 | } |
459 | ||
460 | /** | |
461 | * nand_block_checkbad - [GENERIC] Check if a block is marked bad | |
8b6e50c9 BN |
462 | * @mtd: MTD device structure |
463 | * @ofs: offset from device start | |
464 | * @getchip: 0, if the chip is already selected | |
465 | * @allowbbt: 1, if its allowed to access the bbt area | |
1da177e4 LT |
466 | * |
467 | * Check, if the block is bad. Either by reading the bad block table or | |
468 | * calling of the scan function. | |
469 | */ | |
2c0a2bed TG |
470 | static int nand_block_checkbad(struct mtd_info *mtd, loff_t ofs, int getchip, |
471 | int allowbbt) | |
1da177e4 | 472 | { |
ace4dfee | 473 | struct nand_chip *chip = mtd->priv; |
61b03bd7 | 474 | |
ace4dfee TG |
475 | if (!chip->bbt) |
476 | return chip->block_bad(mtd, ofs, getchip); | |
61b03bd7 | 477 | |
1da177e4 | 478 | /* Return info from the table */ |
e0c7d767 | 479 | return nand_isbad_bbt(mtd, ofs, allowbbt); |
1da177e4 LT |
480 | } |
481 | ||
2af7c653 SK |
482 | /** |
483 | * panic_nand_wait_ready - [GENERIC] Wait for the ready pin after commands. | |
8b6e50c9 BN |
484 | * @mtd: MTD device structure |
485 | * @timeo: Timeout | |
2af7c653 SK |
486 | * |
487 | * Helper function for nand_wait_ready used when needing to wait in interrupt | |
488 | * context. | |
489 | */ | |
490 | static void panic_nand_wait_ready(struct mtd_info *mtd, unsigned long timeo) | |
491 | { | |
492 | struct nand_chip *chip = mtd->priv; | |
493 | int i; | |
494 | ||
495 | /* Wait for the device to get ready */ | |
496 | for (i = 0; i < timeo; i++) { | |
497 | if (chip->dev_ready(mtd)) | |
498 | break; | |
499 | touch_softlockup_watchdog(); | |
500 | mdelay(1); | |
501 | } | |
502 | } | |
503 | ||
7854d3f7 | 504 | /* Wait for the ready pin, after a command. The timeout is caught later. */ |
4b648b02 | 505 | void nand_wait_ready(struct mtd_info *mtd) |
3b88775c | 506 | { |
ace4dfee | 507 | struct nand_chip *chip = mtd->priv; |
e0c7d767 | 508 | unsigned long timeo = jiffies + 2; |
3b88775c | 509 | |
2af7c653 SK |
510 | /* 400ms timeout */ |
511 | if (in_interrupt() || oops_in_progress) | |
512 | return panic_nand_wait_ready(mtd, 400); | |
513 | ||
8fe833c1 | 514 | led_trigger_event(nand_led_trigger, LED_FULL); |
7854d3f7 | 515 | /* Wait until command is processed or timeout occurs */ |
3b88775c | 516 | do { |
ace4dfee | 517 | if (chip->dev_ready(mtd)) |
8fe833c1 | 518 | break; |
8446f1d3 | 519 | touch_softlockup_watchdog(); |
61b03bd7 | 520 | } while (time_before(jiffies, timeo)); |
8fe833c1 | 521 | led_trigger_event(nand_led_trigger, LED_OFF); |
3b88775c | 522 | } |
4b648b02 | 523 | EXPORT_SYMBOL_GPL(nand_wait_ready); |
3b88775c | 524 | |
1da177e4 LT |
525 | /** |
526 | * nand_command - [DEFAULT] Send command to NAND device | |
8b6e50c9 BN |
527 | * @mtd: MTD device structure |
528 | * @command: the command to be sent | |
529 | * @column: the column address for this command, -1 if none | |
530 | * @page_addr: the page address for this command, -1 if none | |
1da177e4 | 531 | * |
8b6e50c9 BN |
532 | * Send command to NAND device. This function is used for small page devices |
533 | * (256/512 Bytes per page). | |
1da177e4 | 534 | */ |
7abd3ef9 TG |
535 | static void nand_command(struct mtd_info *mtd, unsigned int command, |
536 | int column, int page_addr) | |
1da177e4 | 537 | { |
ace4dfee | 538 | register struct nand_chip *chip = mtd->priv; |
7abd3ef9 | 539 | int ctrl = NAND_CTRL_CLE | NAND_CTRL_CHANGE; |
1da177e4 | 540 | |
8b6e50c9 | 541 | /* Write out the command to the device */ |
1da177e4 LT |
542 | if (command == NAND_CMD_SEQIN) { |
543 | int readcmd; | |
544 | ||
28318776 | 545 | if (column >= mtd->writesize) { |
1da177e4 | 546 | /* OOB area */ |
28318776 | 547 | column -= mtd->writesize; |
1da177e4 LT |
548 | readcmd = NAND_CMD_READOOB; |
549 | } else if (column < 256) { | |
550 | /* First 256 bytes --> READ0 */ | |
551 | readcmd = NAND_CMD_READ0; | |
552 | } else { | |
553 | column -= 256; | |
554 | readcmd = NAND_CMD_READ1; | |
555 | } | |
ace4dfee | 556 | chip->cmd_ctrl(mtd, readcmd, ctrl); |
7abd3ef9 | 557 | ctrl &= ~NAND_CTRL_CHANGE; |
1da177e4 | 558 | } |
ace4dfee | 559 | chip->cmd_ctrl(mtd, command, ctrl); |
1da177e4 | 560 | |
8b6e50c9 | 561 | /* Address cycle, when necessary */ |
7abd3ef9 TG |
562 | ctrl = NAND_CTRL_ALE | NAND_CTRL_CHANGE; |
563 | /* Serially input address */ | |
564 | if (column != -1) { | |
565 | /* Adjust columns for 16 bit buswidth */ | |
ace4dfee | 566 | if (chip->options & NAND_BUSWIDTH_16) |
7abd3ef9 | 567 | column >>= 1; |
ace4dfee | 568 | chip->cmd_ctrl(mtd, column, ctrl); |
7abd3ef9 TG |
569 | ctrl &= ~NAND_CTRL_CHANGE; |
570 | } | |
571 | if (page_addr != -1) { | |
ace4dfee | 572 | chip->cmd_ctrl(mtd, page_addr, ctrl); |
7abd3ef9 | 573 | ctrl &= ~NAND_CTRL_CHANGE; |
ace4dfee | 574 | chip->cmd_ctrl(mtd, page_addr >> 8, ctrl); |
7abd3ef9 | 575 | /* One more address cycle for devices > 32MiB */ |
ace4dfee TG |
576 | if (chip->chipsize > (32 << 20)) |
577 | chip->cmd_ctrl(mtd, page_addr >> 16, ctrl); | |
1da177e4 | 578 | } |
ace4dfee | 579 | chip->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); |
61b03bd7 TG |
580 | |
581 | /* | |
8b6e50c9 BN |
582 | * Program and erase have their own busy handlers status and sequential |
583 | * in needs no delay | |
e0c7d767 | 584 | */ |
1da177e4 | 585 | switch (command) { |
61b03bd7 | 586 | |
1da177e4 LT |
587 | case NAND_CMD_PAGEPROG: |
588 | case NAND_CMD_ERASE1: | |
589 | case NAND_CMD_ERASE2: | |
590 | case NAND_CMD_SEQIN: | |
591 | case NAND_CMD_STATUS: | |
592 | return; | |
593 | ||
594 | case NAND_CMD_RESET: | |
ace4dfee | 595 | if (chip->dev_ready) |
1da177e4 | 596 | break; |
ace4dfee TG |
597 | udelay(chip->chip_delay); |
598 | chip->cmd_ctrl(mtd, NAND_CMD_STATUS, | |
7abd3ef9 | 599 | NAND_CTRL_CLE | NAND_CTRL_CHANGE); |
12efdde3 TG |
600 | chip->cmd_ctrl(mtd, |
601 | NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); | |
f8ac0414 FF |
602 | while (!(chip->read_byte(mtd) & NAND_STATUS_READY)) |
603 | ; | |
1da177e4 LT |
604 | return; |
605 | ||
e0c7d767 | 606 | /* This applies to read commands */ |
1da177e4 | 607 | default: |
61b03bd7 | 608 | /* |
1da177e4 LT |
609 | * If we don't have access to the busy pin, we apply the given |
610 | * command delay | |
e0c7d767 | 611 | */ |
ace4dfee TG |
612 | if (!chip->dev_ready) { |
613 | udelay(chip->chip_delay); | |
1da177e4 | 614 | return; |
61b03bd7 | 615 | } |
1da177e4 | 616 | } |
8b6e50c9 BN |
617 | /* |
618 | * Apply this short delay always to ensure that we do wait tWB in | |
619 | * any case on any machine. | |
620 | */ | |
e0c7d767 | 621 | ndelay(100); |
3b88775c TG |
622 | |
623 | nand_wait_ready(mtd); | |
1da177e4 LT |
624 | } |
625 | ||
626 | /** | |
627 | * nand_command_lp - [DEFAULT] Send command to NAND large page device | |
8b6e50c9 BN |
628 | * @mtd: MTD device structure |
629 | * @command: the command to be sent | |
630 | * @column: the column address for this command, -1 if none | |
631 | * @page_addr: the page address for this command, -1 if none | |
1da177e4 | 632 | * |
7abd3ef9 | 633 | * Send command to NAND device. This is the version for the new large page |
7854d3f7 BN |
634 | * devices. We don't have the separate regions as we have in the small page |
635 | * devices. We must emulate NAND_CMD_READOOB to keep the code compatible. | |
1da177e4 | 636 | */ |
7abd3ef9 TG |
637 | static void nand_command_lp(struct mtd_info *mtd, unsigned int command, |
638 | int column, int page_addr) | |
1da177e4 | 639 | { |
ace4dfee | 640 | register struct nand_chip *chip = mtd->priv; |
1da177e4 LT |
641 | |
642 | /* Emulate NAND_CMD_READOOB */ | |
643 | if (command == NAND_CMD_READOOB) { | |
28318776 | 644 | column += mtd->writesize; |
1da177e4 LT |
645 | command = NAND_CMD_READ0; |
646 | } | |
61b03bd7 | 647 | |
7abd3ef9 | 648 | /* Command latch cycle */ |
ace4dfee | 649 | chip->cmd_ctrl(mtd, command & 0xff, |
7abd3ef9 | 650 | NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE); |
1da177e4 LT |
651 | |
652 | if (column != -1 || page_addr != -1) { | |
7abd3ef9 | 653 | int ctrl = NAND_CTRL_CHANGE | NAND_NCE | NAND_ALE; |
1da177e4 LT |
654 | |
655 | /* Serially input address */ | |
656 | if (column != -1) { | |
657 | /* Adjust columns for 16 bit buswidth */ | |
ace4dfee | 658 | if (chip->options & NAND_BUSWIDTH_16) |
1da177e4 | 659 | column >>= 1; |
ace4dfee | 660 | chip->cmd_ctrl(mtd, column, ctrl); |
7abd3ef9 | 661 | ctrl &= ~NAND_CTRL_CHANGE; |
ace4dfee | 662 | chip->cmd_ctrl(mtd, column >> 8, ctrl); |
61b03bd7 | 663 | } |
1da177e4 | 664 | if (page_addr != -1) { |
ace4dfee TG |
665 | chip->cmd_ctrl(mtd, page_addr, ctrl); |
666 | chip->cmd_ctrl(mtd, page_addr >> 8, | |
7abd3ef9 | 667 | NAND_NCE | NAND_ALE); |
1da177e4 | 668 | /* One more address cycle for devices > 128MiB */ |
ace4dfee TG |
669 | if (chip->chipsize > (128 << 20)) |
670 | chip->cmd_ctrl(mtd, page_addr >> 16, | |
7abd3ef9 | 671 | NAND_NCE | NAND_ALE); |
1da177e4 | 672 | } |
1da177e4 | 673 | } |
ace4dfee | 674 | chip->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); |
61b03bd7 TG |
675 | |
676 | /* | |
8b6e50c9 BN |
677 | * Program and erase have their own busy handlers status, sequential |
678 | * in, and deplete1 need no delay. | |
30f464b7 | 679 | */ |
1da177e4 | 680 | switch (command) { |
61b03bd7 | 681 | |
1da177e4 LT |
682 | case NAND_CMD_CACHEDPROG: |
683 | case NAND_CMD_PAGEPROG: | |
684 | case NAND_CMD_ERASE1: | |
685 | case NAND_CMD_ERASE2: | |
686 | case NAND_CMD_SEQIN: | |
7bc3312b | 687 | case NAND_CMD_RNDIN: |
1da177e4 | 688 | case NAND_CMD_STATUS: |
30f464b7 | 689 | case NAND_CMD_DEPLETE1: |
1da177e4 LT |
690 | return; |
691 | ||
30f464b7 DM |
692 | case NAND_CMD_STATUS_ERROR: |
693 | case NAND_CMD_STATUS_ERROR0: | |
694 | case NAND_CMD_STATUS_ERROR1: | |
695 | case NAND_CMD_STATUS_ERROR2: | |
696 | case NAND_CMD_STATUS_ERROR3: | |
8b6e50c9 | 697 | /* Read error status commands require only a short delay */ |
ace4dfee | 698 | udelay(chip->chip_delay); |
30f464b7 | 699 | return; |
1da177e4 LT |
700 | |
701 | case NAND_CMD_RESET: | |
ace4dfee | 702 | if (chip->dev_ready) |
1da177e4 | 703 | break; |
ace4dfee | 704 | udelay(chip->chip_delay); |
12efdde3 TG |
705 | chip->cmd_ctrl(mtd, NAND_CMD_STATUS, |
706 | NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE); | |
707 | chip->cmd_ctrl(mtd, NAND_CMD_NONE, | |
708 | NAND_NCE | NAND_CTRL_CHANGE); | |
f8ac0414 FF |
709 | while (!(chip->read_byte(mtd) & NAND_STATUS_READY)) |
710 | ; | |
1da177e4 LT |
711 | return; |
712 | ||
7bc3312b TG |
713 | case NAND_CMD_RNDOUT: |
714 | /* No ready / busy check necessary */ | |
715 | chip->cmd_ctrl(mtd, NAND_CMD_RNDOUTSTART, | |
716 | NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE); | |
717 | chip->cmd_ctrl(mtd, NAND_CMD_NONE, | |
718 | NAND_NCE | NAND_CTRL_CHANGE); | |
719 | return; | |
720 | ||
1da177e4 | 721 | case NAND_CMD_READ0: |
12efdde3 TG |
722 | chip->cmd_ctrl(mtd, NAND_CMD_READSTART, |
723 | NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE); | |
724 | chip->cmd_ctrl(mtd, NAND_CMD_NONE, | |
725 | NAND_NCE | NAND_CTRL_CHANGE); | |
61b03bd7 | 726 | |
e0c7d767 | 727 | /* This applies to read commands */ |
1da177e4 | 728 | default: |
61b03bd7 | 729 | /* |
1da177e4 | 730 | * If we don't have access to the busy pin, we apply the given |
8b6e50c9 | 731 | * command delay. |
e0c7d767 | 732 | */ |
ace4dfee TG |
733 | if (!chip->dev_ready) { |
734 | udelay(chip->chip_delay); | |
1da177e4 | 735 | return; |
61b03bd7 | 736 | } |
1da177e4 | 737 | } |
3b88775c | 738 | |
8b6e50c9 BN |
739 | /* |
740 | * Apply this short delay always to ensure that we do wait tWB in | |
741 | * any case on any machine. | |
742 | */ | |
e0c7d767 | 743 | ndelay(100); |
3b88775c TG |
744 | |
745 | nand_wait_ready(mtd); | |
1da177e4 LT |
746 | } |
747 | ||
2af7c653 SK |
748 | /** |
749 | * panic_nand_get_device - [GENERIC] Get chip for selected access | |
8b6e50c9 BN |
750 | * @chip: the nand chip descriptor |
751 | * @mtd: MTD device structure | |
752 | * @new_state: the state which is requested | |
2af7c653 SK |
753 | * |
754 | * Used when in panic, no locks are taken. | |
755 | */ | |
756 | static void panic_nand_get_device(struct nand_chip *chip, | |
757 | struct mtd_info *mtd, int new_state) | |
758 | { | |
7854d3f7 | 759 | /* Hardware controller shared among independent devices */ |
2af7c653 SK |
760 | chip->controller->active = chip; |
761 | chip->state = new_state; | |
762 | } | |
763 | ||
1da177e4 LT |
764 | /** |
765 | * nand_get_device - [GENERIC] Get chip for selected access | |
8b6e50c9 BN |
766 | * @chip: the nand chip descriptor |
767 | * @mtd: MTD device structure | |
768 | * @new_state: the state which is requested | |
1da177e4 LT |
769 | * |
770 | * Get the device and lock it for exclusive access | |
771 | */ | |
2c0a2bed | 772 | static int |
ace4dfee | 773 | nand_get_device(struct nand_chip *chip, struct mtd_info *mtd, int new_state) |
1da177e4 | 774 | { |
ace4dfee TG |
775 | spinlock_t *lock = &chip->controller->lock; |
776 | wait_queue_head_t *wq = &chip->controller->wq; | |
e0c7d767 | 777 | DECLARE_WAITQUEUE(wait, current); |
7351d3a5 | 778 | retry: |
0dfc6246 TG |
779 | spin_lock(lock); |
780 | ||
b8b3ee9a | 781 | /* Hardware controller shared among independent devices */ |
ace4dfee TG |
782 | if (!chip->controller->active) |
783 | chip->controller->active = chip; | |
a36ed299 | 784 | |
ace4dfee TG |
785 | if (chip->controller->active == chip && chip->state == FL_READY) { |
786 | chip->state = new_state; | |
0dfc6246 | 787 | spin_unlock(lock); |
962034f4 VW |
788 | return 0; |
789 | } | |
790 | if (new_state == FL_PM_SUSPENDED) { | |
6b0d9a84 LY |
791 | if (chip->controller->active->state == FL_PM_SUSPENDED) { |
792 | chip->state = FL_PM_SUSPENDED; | |
793 | spin_unlock(lock); | |
794 | return 0; | |
6b0d9a84 | 795 | } |
0dfc6246 TG |
796 | } |
797 | set_current_state(TASK_UNINTERRUPTIBLE); | |
798 | add_wait_queue(wq, &wait); | |
799 | spin_unlock(lock); | |
800 | schedule(); | |
801 | remove_wait_queue(wq, &wait); | |
1da177e4 LT |
802 | goto retry; |
803 | } | |
804 | ||
2af7c653 | 805 | /** |
8b6e50c9 BN |
806 | * panic_nand_wait - [GENERIC] wait until the command is done |
807 | * @mtd: MTD device structure | |
808 | * @chip: NAND chip structure | |
809 | * @timeo: timeout | |
2af7c653 SK |
810 | * |
811 | * Wait for command done. This is a helper function for nand_wait used when | |
812 | * we are in interrupt context. May happen when in panic and trying to write | |
b595076a | 813 | * an oops through mtdoops. |
2af7c653 SK |
814 | */ |
815 | static void panic_nand_wait(struct mtd_info *mtd, struct nand_chip *chip, | |
816 | unsigned long timeo) | |
817 | { | |
818 | int i; | |
819 | for (i = 0; i < timeo; i++) { | |
820 | if (chip->dev_ready) { | |
821 | if (chip->dev_ready(mtd)) | |
822 | break; | |
823 | } else { | |
824 | if (chip->read_byte(mtd) & NAND_STATUS_READY) | |
825 | break; | |
826 | } | |
827 | mdelay(1); | |
f8ac0414 | 828 | } |
2af7c653 SK |
829 | } |
830 | ||
1da177e4 | 831 | /** |
8b6e50c9 BN |
832 | * nand_wait - [DEFAULT] wait until the command is done |
833 | * @mtd: MTD device structure | |
834 | * @chip: NAND chip structure | |
1da177e4 | 835 | * |
8b6e50c9 BN |
836 | * Wait for command done. This applies to erase and program only. Erase can |
837 | * take up to 400ms and program up to 20ms according to general NAND and | |
838 | * SmartMedia specs. | |
844d3b42 | 839 | */ |
7bc3312b | 840 | static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip) |
1da177e4 LT |
841 | { |
842 | ||
e0c7d767 | 843 | unsigned long timeo = jiffies; |
7bc3312b | 844 | int status, state = chip->state; |
61b03bd7 | 845 | |
1da177e4 | 846 | if (state == FL_ERASING) |
e0c7d767 | 847 | timeo += (HZ * 400) / 1000; |
1da177e4 | 848 | else |
e0c7d767 | 849 | timeo += (HZ * 20) / 1000; |
1da177e4 | 850 | |
8fe833c1 RP |
851 | led_trigger_event(nand_led_trigger, LED_FULL); |
852 | ||
8b6e50c9 BN |
853 | /* |
854 | * Apply this short delay always to ensure that we do wait tWB in any | |
855 | * case on any machine. | |
856 | */ | |
e0c7d767 | 857 | ndelay(100); |
1da177e4 | 858 | |
ace4dfee TG |
859 | if ((state == FL_ERASING) && (chip->options & NAND_IS_AND)) |
860 | chip->cmdfunc(mtd, NAND_CMD_STATUS_MULTI, -1, -1); | |
61b03bd7 | 861 | else |
ace4dfee | 862 | chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1); |
1da177e4 | 863 | |
2af7c653 SK |
864 | if (in_interrupt() || oops_in_progress) |
865 | panic_nand_wait(mtd, chip, timeo); | |
866 | else { | |
867 | while (time_before(jiffies, timeo)) { | |
868 | if (chip->dev_ready) { | |
869 | if (chip->dev_ready(mtd)) | |
870 | break; | |
871 | } else { | |
872 | if (chip->read_byte(mtd) & NAND_STATUS_READY) | |
873 | break; | |
874 | } | |
875 | cond_resched(); | |
1da177e4 | 876 | } |
1da177e4 | 877 | } |
8fe833c1 RP |
878 | led_trigger_event(nand_led_trigger, LED_OFF); |
879 | ||
ace4dfee | 880 | status = (int)chip->read_byte(mtd); |
1da177e4 LT |
881 | return status; |
882 | } | |
883 | ||
7d70f334 | 884 | /** |
b6d676db | 885 | * __nand_unlock - [REPLACEABLE] unlocks specified locked blocks |
b6d676db RD |
886 | * @mtd: mtd info |
887 | * @ofs: offset to start unlock from | |
888 | * @len: length to unlock | |
8b6e50c9 BN |
889 | * @invert: when = 0, unlock the range of blocks within the lower and |
890 | * upper boundary address | |
891 | * when = 1, unlock the range of blocks outside the boundaries | |
892 | * of the lower and upper boundary address | |
7d70f334 | 893 | * |
8b6e50c9 | 894 | * Returs unlock status. |
7d70f334 VS |
895 | */ |
896 | static int __nand_unlock(struct mtd_info *mtd, loff_t ofs, | |
897 | uint64_t len, int invert) | |
898 | { | |
899 | int ret = 0; | |
900 | int status, page; | |
901 | struct nand_chip *chip = mtd->priv; | |
902 | ||
903 | /* Submit address of first page to unlock */ | |
904 | page = ofs >> chip->page_shift; | |
905 | chip->cmdfunc(mtd, NAND_CMD_UNLOCK1, -1, page & chip->pagemask); | |
906 | ||
907 | /* Submit address of last page to unlock */ | |
908 | page = (ofs + len) >> chip->page_shift; | |
909 | chip->cmdfunc(mtd, NAND_CMD_UNLOCK2, -1, | |
910 | (page | invert) & chip->pagemask); | |
911 | ||
912 | /* Call wait ready function */ | |
913 | status = chip->waitfunc(mtd, chip); | |
7d70f334 VS |
914 | /* See if device thinks it succeeded */ |
915 | if (status & 0x01) { | |
916 | DEBUG(MTD_DEBUG_LEVEL0, "%s: Error status = 0x%08x\n", | |
917 | __func__, status); | |
918 | ret = -EIO; | |
919 | } | |
920 | ||
921 | return ret; | |
922 | } | |
923 | ||
924 | /** | |
b6d676db | 925 | * nand_unlock - [REPLACEABLE] unlocks specified locked blocks |
b6d676db RD |
926 | * @mtd: mtd info |
927 | * @ofs: offset to start unlock from | |
928 | * @len: length to unlock | |
7d70f334 | 929 | * |
8b6e50c9 | 930 | * Returns unlock status. |
7d70f334 VS |
931 | */ |
932 | int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len) | |
933 | { | |
934 | int ret = 0; | |
935 | int chipnr; | |
936 | struct nand_chip *chip = mtd->priv; | |
937 | ||
938 | DEBUG(MTD_DEBUG_LEVEL3, "%s: start = 0x%012llx, len = %llu\n", | |
939 | __func__, (unsigned long long)ofs, len); | |
940 | ||
941 | if (check_offs_len(mtd, ofs, len)) | |
942 | ret = -EINVAL; | |
943 | ||
944 | /* Align to last block address if size addresses end of the device */ | |
945 | if (ofs + len == mtd->size) | |
946 | len -= mtd->erasesize; | |
947 | ||
948 | nand_get_device(chip, mtd, FL_UNLOCKING); | |
949 | ||
950 | /* Shift to get chip number */ | |
951 | chipnr = ofs >> chip->chip_shift; | |
952 | ||
953 | chip->select_chip(mtd, chipnr); | |
954 | ||
955 | /* Check, if it is write protected */ | |
956 | if (nand_check_wp(mtd)) { | |
957 | DEBUG(MTD_DEBUG_LEVEL0, "%s: Device is write protected!!!\n", | |
958 | __func__); | |
959 | ret = -EIO; | |
960 | goto out; | |
961 | } | |
962 | ||
963 | ret = __nand_unlock(mtd, ofs, len, 0); | |
964 | ||
965 | out: | |
7d70f334 VS |
966 | nand_release_device(mtd); |
967 | ||
968 | return ret; | |
969 | } | |
7351d3a5 | 970 | EXPORT_SYMBOL(nand_unlock); |
7d70f334 VS |
971 | |
972 | /** | |
b6d676db | 973 | * nand_lock - [REPLACEABLE] locks all blocks present in the device |
b6d676db RD |
974 | * @mtd: mtd info |
975 | * @ofs: offset to start unlock from | |
976 | * @len: length to unlock | |
7d70f334 | 977 | * |
8b6e50c9 BN |
978 | * This feature is not supported in many NAND parts. 'Micron' NAND parts do |
979 | * have this feature, but it allows only to lock all blocks, not for specified | |
980 | * range for block. Implementing 'lock' feature by making use of 'unlock', for | |
981 | * now. | |
7d70f334 | 982 | * |
8b6e50c9 | 983 | * Returns lock status. |
7d70f334 VS |
984 | */ |
985 | int nand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len) | |
986 | { | |
987 | int ret = 0; | |
988 | int chipnr, status, page; | |
989 | struct nand_chip *chip = mtd->priv; | |
990 | ||
991 | DEBUG(MTD_DEBUG_LEVEL3, "%s: start = 0x%012llx, len = %llu\n", | |
992 | __func__, (unsigned long long)ofs, len); | |
993 | ||
994 | if (check_offs_len(mtd, ofs, len)) | |
995 | ret = -EINVAL; | |
996 | ||
997 | nand_get_device(chip, mtd, FL_LOCKING); | |
998 | ||
999 | /* Shift to get chip number */ | |
1000 | chipnr = ofs >> chip->chip_shift; | |
1001 | ||
1002 | chip->select_chip(mtd, chipnr); | |
1003 | ||
1004 | /* Check, if it is write protected */ | |
1005 | if (nand_check_wp(mtd)) { | |
1006 | DEBUG(MTD_DEBUG_LEVEL0, "%s: Device is write protected!!!\n", | |
1007 | __func__); | |
1008 | status = MTD_ERASE_FAILED; | |
1009 | ret = -EIO; | |
1010 | goto out; | |
1011 | } | |
1012 | ||
1013 | /* Submit address of first page to lock */ | |
1014 | page = ofs >> chip->page_shift; | |
1015 | chip->cmdfunc(mtd, NAND_CMD_LOCK, -1, page & chip->pagemask); | |
1016 | ||
1017 | /* Call wait ready function */ | |
1018 | status = chip->waitfunc(mtd, chip); | |
7d70f334 VS |
1019 | /* See if device thinks it succeeded */ |
1020 | if (status & 0x01) { | |
1021 | DEBUG(MTD_DEBUG_LEVEL0, "%s: Error status = 0x%08x\n", | |
1022 | __func__, status); | |
1023 | ret = -EIO; | |
1024 | goto out; | |
1025 | } | |
1026 | ||
1027 | ret = __nand_unlock(mtd, ofs, len, 0x1); | |
1028 | ||
1029 | out: | |
7d70f334 VS |
1030 | nand_release_device(mtd); |
1031 | ||
1032 | return ret; | |
1033 | } | |
7351d3a5 | 1034 | EXPORT_SYMBOL(nand_lock); |
7d70f334 | 1035 | |
8593fbc6 | 1036 | /** |
7854d3f7 | 1037 | * nand_read_page_raw - [INTERN] read raw page data without ecc |
8b6e50c9 BN |
1038 | * @mtd: mtd info structure |
1039 | * @chip: nand chip info structure | |
1040 | * @buf: buffer to store read data | |
1041 | * @page: page number to read | |
52ff49df | 1042 | * |
7854d3f7 | 1043 | * Not for syndrome calculating ECC controllers, which use a special oob layout. |
8593fbc6 TG |
1044 | */ |
1045 | static int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip, | |
46a8cf2d | 1046 | uint8_t *buf, int page) |
8593fbc6 TG |
1047 | { |
1048 | chip->read_buf(mtd, buf, mtd->writesize); | |
1049 | chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); | |
1050 | return 0; | |
1051 | } | |
1052 | ||
52ff49df | 1053 | /** |
7854d3f7 | 1054 | * nand_read_page_raw_syndrome - [INTERN] read raw page data without ecc |
8b6e50c9 BN |
1055 | * @mtd: mtd info structure |
1056 | * @chip: nand chip info structure | |
1057 | * @buf: buffer to store read data | |
1058 | * @page: page number to read | |
52ff49df DB |
1059 | * |
1060 | * We need a special oob layout and handling even when OOB isn't used. | |
1061 | */ | |
7351d3a5 FF |
1062 | static int nand_read_page_raw_syndrome(struct mtd_info *mtd, |
1063 | struct nand_chip *chip, | |
1064 | uint8_t *buf, int page) | |
52ff49df DB |
1065 | { |
1066 | int eccsize = chip->ecc.size; | |
1067 | int eccbytes = chip->ecc.bytes; | |
1068 | uint8_t *oob = chip->oob_poi; | |
1069 | int steps, size; | |
1070 | ||
1071 | for (steps = chip->ecc.steps; steps > 0; steps--) { | |
1072 | chip->read_buf(mtd, buf, eccsize); | |
1073 | buf += eccsize; | |
1074 | ||
1075 | if (chip->ecc.prepad) { | |
1076 | chip->read_buf(mtd, oob, chip->ecc.prepad); | |
1077 | oob += chip->ecc.prepad; | |
1078 | } | |
1079 | ||
1080 | chip->read_buf(mtd, oob, eccbytes); | |
1081 | oob += eccbytes; | |
1082 | ||
1083 | if (chip->ecc.postpad) { | |
1084 | chip->read_buf(mtd, oob, chip->ecc.postpad); | |
1085 | oob += chip->ecc.postpad; | |
1086 | } | |
1087 | } | |
1088 | ||
1089 | size = mtd->oobsize - (oob - chip->oob_poi); | |
1090 | if (size) | |
1091 | chip->read_buf(mtd, oob, size); | |
1092 | ||
1093 | return 0; | |
1094 | } | |
1095 | ||
1da177e4 | 1096 | /** |
7854d3f7 | 1097 | * nand_read_page_swecc - [REPLACEABLE] software ECC based page read function |
8b6e50c9 BN |
1098 | * @mtd: mtd info structure |
1099 | * @chip: nand chip info structure | |
1100 | * @buf: buffer to store read data | |
1101 | * @page: page number to read | |
068e3c0a | 1102 | */ |
f5bbdacc | 1103 | static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip, |
46a8cf2d | 1104 | uint8_t *buf, int page) |
1da177e4 | 1105 | { |
f5bbdacc TG |
1106 | int i, eccsize = chip->ecc.size; |
1107 | int eccbytes = chip->ecc.bytes; | |
1108 | int eccsteps = chip->ecc.steps; | |
1109 | uint8_t *p = buf; | |
4bf63fcb DW |
1110 | uint8_t *ecc_calc = chip->buffers->ecccalc; |
1111 | uint8_t *ecc_code = chip->buffers->ecccode; | |
8b099a39 | 1112 | uint32_t *eccpos = chip->ecc.layout->eccpos; |
f5bbdacc | 1113 | |
46a8cf2d | 1114 | chip->ecc.read_page_raw(mtd, chip, buf, page); |
f5bbdacc TG |
1115 | |
1116 | for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) | |
1117 | chip->ecc.calculate(mtd, p, &ecc_calc[i]); | |
1118 | ||
1119 | for (i = 0; i < chip->ecc.total; i++) | |
f75e5097 | 1120 | ecc_code[i] = chip->oob_poi[eccpos[i]]; |
f5bbdacc TG |
1121 | |
1122 | eccsteps = chip->ecc.steps; | |
1123 | p = buf; | |
1124 | ||
1125 | for (i = 0 ; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { | |
1126 | int stat; | |
1127 | ||
1128 | stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]); | |
c32b8dcc | 1129 | if (stat < 0) |
f5bbdacc TG |
1130 | mtd->ecc_stats.failed++; |
1131 | else | |
1132 | mtd->ecc_stats.corrected += stat; | |
1133 | } | |
1134 | return 0; | |
22c60f5f | 1135 | } |
1da177e4 | 1136 | |
3d459559 | 1137 | /** |
7854d3f7 | 1138 | * nand_read_subpage - [REPLACEABLE] software ECC based sub-page read function |
8b6e50c9 BN |
1139 | * @mtd: mtd info structure |
1140 | * @chip: nand chip info structure | |
1141 | * @data_offs: offset of requested data within the page | |
1142 | * @readlen: data length | |
1143 | * @bufpoi: buffer to store read data | |
3d459559 | 1144 | */ |
7351d3a5 FF |
1145 | static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, |
1146 | uint32_t data_offs, uint32_t readlen, uint8_t *bufpoi) | |
3d459559 AK |
1147 | { |
1148 | int start_step, end_step, num_steps; | |
1149 | uint32_t *eccpos = chip->ecc.layout->eccpos; | |
1150 | uint8_t *p; | |
1151 | int data_col_addr, i, gaps = 0; | |
1152 | int datafrag_len, eccfrag_len, aligned_len, aligned_pos; | |
1153 | int busw = (chip->options & NAND_BUSWIDTH_16) ? 2 : 1; | |
7351d3a5 | 1154 | int index = 0; |
3d459559 | 1155 | |
7854d3f7 | 1156 | /* Column address within the page aligned to ECC size (256bytes) */ |
3d459559 AK |
1157 | start_step = data_offs / chip->ecc.size; |
1158 | end_step = (data_offs + readlen - 1) / chip->ecc.size; | |
1159 | num_steps = end_step - start_step + 1; | |
1160 | ||
8b6e50c9 | 1161 | /* Data size aligned to ECC ecc.size */ |
3d459559 AK |
1162 | datafrag_len = num_steps * chip->ecc.size; |
1163 | eccfrag_len = num_steps * chip->ecc.bytes; | |
1164 | ||
1165 | data_col_addr = start_step * chip->ecc.size; | |
1166 | /* If we read not a page aligned data */ | |
1167 | if (data_col_addr != 0) | |
1168 | chip->cmdfunc(mtd, NAND_CMD_RNDOUT, data_col_addr, -1); | |
1169 | ||
1170 | p = bufpoi + data_col_addr; | |
1171 | chip->read_buf(mtd, p, datafrag_len); | |
1172 | ||
8b6e50c9 | 1173 | /* Calculate ECC */ |
3d459559 AK |
1174 | for (i = 0; i < eccfrag_len ; i += chip->ecc.bytes, p += chip->ecc.size) |
1175 | chip->ecc.calculate(mtd, p, &chip->buffers->ecccalc[i]); | |
1176 | ||
8b6e50c9 BN |
1177 | /* |
1178 | * The performance is faster if we position offsets according to | |
7854d3f7 | 1179 | * ecc.pos. Let's make sure that there are no gaps in ECC positions. |
8b6e50c9 | 1180 | */ |
3d459559 AK |
1181 | for (i = 0; i < eccfrag_len - 1; i++) { |
1182 | if (eccpos[i + start_step * chip->ecc.bytes] + 1 != | |
1183 | eccpos[i + start_step * chip->ecc.bytes + 1]) { | |
1184 | gaps = 1; | |
1185 | break; | |
1186 | } | |
1187 | } | |
1188 | if (gaps) { | |
1189 | chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize, -1); | |
1190 | chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); | |
1191 | } else { | |
8b6e50c9 | 1192 | /* |
7854d3f7 | 1193 | * Send the command to read the particular ECC bytes take care |
8b6e50c9 BN |
1194 | * about buswidth alignment in read_buf. |
1195 | */ | |
7351d3a5 FF |
1196 | index = start_step * chip->ecc.bytes; |
1197 | ||
1198 | aligned_pos = eccpos[index] & ~(busw - 1); | |
3d459559 | 1199 | aligned_len = eccfrag_len; |
7351d3a5 | 1200 | if (eccpos[index] & (busw - 1)) |
3d459559 | 1201 | aligned_len++; |
7351d3a5 | 1202 | if (eccpos[index + (num_steps * chip->ecc.bytes)] & (busw - 1)) |
3d459559 AK |
1203 | aligned_len++; |
1204 | ||
7351d3a5 FF |
1205 | chip->cmdfunc(mtd, NAND_CMD_RNDOUT, |
1206 | mtd->writesize + aligned_pos, -1); | |
3d459559 AK |
1207 | chip->read_buf(mtd, &chip->oob_poi[aligned_pos], aligned_len); |
1208 | } | |
1209 | ||
1210 | for (i = 0; i < eccfrag_len; i++) | |
7351d3a5 | 1211 | chip->buffers->ecccode[i] = chip->oob_poi[eccpos[i + index]]; |
3d459559 AK |
1212 | |
1213 | p = bufpoi + data_col_addr; | |
1214 | for (i = 0; i < eccfrag_len ; i += chip->ecc.bytes, p += chip->ecc.size) { | |
1215 | int stat; | |
1216 | ||
7351d3a5 FF |
1217 | stat = chip->ecc.correct(mtd, p, |
1218 | &chip->buffers->ecccode[i], &chip->buffers->ecccalc[i]); | |
12c8eb98 | 1219 | if (stat < 0) |
3d459559 AK |
1220 | mtd->ecc_stats.failed++; |
1221 | else | |
1222 | mtd->ecc_stats.corrected += stat; | |
1223 | } | |
1224 | return 0; | |
1225 | } | |
1226 | ||
068e3c0a | 1227 | /** |
7854d3f7 | 1228 | * nand_read_page_hwecc - [REPLACEABLE] hardware ECC based page read function |
8b6e50c9 BN |
1229 | * @mtd: mtd info structure |
1230 | * @chip: nand chip info structure | |
1231 | * @buf: buffer to store read data | |
1232 | * @page: page number to read | |
068e3c0a | 1233 | * |
7854d3f7 | 1234 | * Not for syndrome calculating ECC controllers which need a special oob layout. |
068e3c0a | 1235 | */ |
f5bbdacc | 1236 | static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, |
46a8cf2d | 1237 | uint8_t *buf, int page) |
1da177e4 | 1238 | { |
f5bbdacc TG |
1239 | int i, eccsize = chip->ecc.size; |
1240 | int eccbytes = chip->ecc.bytes; | |
1241 | int eccsteps = chip->ecc.steps; | |
1242 | uint8_t *p = buf; | |
4bf63fcb DW |
1243 | uint8_t *ecc_calc = chip->buffers->ecccalc; |
1244 | uint8_t *ecc_code = chip->buffers->ecccode; | |
8b099a39 | 1245 | uint32_t *eccpos = chip->ecc.layout->eccpos; |
f5bbdacc TG |
1246 | |
1247 | for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { | |
1248 | chip->ecc.hwctl(mtd, NAND_ECC_READ); | |
1249 | chip->read_buf(mtd, p, eccsize); | |
1250 | chip->ecc.calculate(mtd, p, &ecc_calc[i]); | |
1da177e4 | 1251 | } |
f75e5097 | 1252 | chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); |
1da177e4 | 1253 | |
f5bbdacc | 1254 | for (i = 0; i < chip->ecc.total; i++) |
f75e5097 | 1255 | ecc_code[i] = chip->oob_poi[eccpos[i]]; |
1da177e4 | 1256 | |
f5bbdacc TG |
1257 | eccsteps = chip->ecc.steps; |
1258 | p = buf; | |
61b03bd7 | 1259 | |
f5bbdacc TG |
1260 | for (i = 0 ; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { |
1261 | int stat; | |
1da177e4 | 1262 | |
f5bbdacc | 1263 | stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]); |
c32b8dcc | 1264 | if (stat < 0) |
f5bbdacc TG |
1265 | mtd->ecc_stats.failed++; |
1266 | else | |
1267 | mtd->ecc_stats.corrected += stat; | |
1268 | } | |
1269 | return 0; | |
1270 | } | |
1da177e4 | 1271 | |
6e0cb135 | 1272 | /** |
7854d3f7 | 1273 | * nand_read_page_hwecc_oob_first - [REPLACEABLE] hw ecc, read oob first |
8b6e50c9 BN |
1274 | * @mtd: mtd info structure |
1275 | * @chip: nand chip info structure | |
1276 | * @buf: buffer to store read data | |
1277 | * @page: page number to read | |
6e0cb135 | 1278 | * |
8b6e50c9 BN |
1279 | * Hardware ECC for large page chips, require OOB to be read first. For this |
1280 | * ECC mode, the write_page method is re-used from ECC_HW. These methods | |
1281 | * read/write ECC from the OOB area, unlike the ECC_HW_SYNDROME support with | |
1282 | * multiple ECC steps, follows the "infix ECC" scheme and reads/writes ECC from | |
1283 | * the data area, by overwriting the NAND manufacturer bad block markings. | |
6e0cb135 SN |
1284 | */ |
1285 | static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd, | |
1286 | struct nand_chip *chip, uint8_t *buf, int page) | |
1287 | { | |
1288 | int i, eccsize = chip->ecc.size; | |
1289 | int eccbytes = chip->ecc.bytes; | |
1290 | int eccsteps = chip->ecc.steps; | |
1291 | uint8_t *p = buf; | |
1292 | uint8_t *ecc_code = chip->buffers->ecccode; | |
1293 | uint32_t *eccpos = chip->ecc.layout->eccpos; | |
1294 | uint8_t *ecc_calc = chip->buffers->ecccalc; | |
1295 | ||
1296 | /* Read the OOB area first */ | |
1297 | chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page); | |
1298 | chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); | |
1299 | chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page); | |
1300 | ||
1301 | for (i = 0; i < chip->ecc.total; i++) | |
1302 | ecc_code[i] = chip->oob_poi[eccpos[i]]; | |
1303 | ||
1304 | for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { | |
1305 | int stat; | |
1306 | ||
1307 | chip->ecc.hwctl(mtd, NAND_ECC_READ); | |
1308 | chip->read_buf(mtd, p, eccsize); | |
1309 | chip->ecc.calculate(mtd, p, &ecc_calc[i]); | |
1310 | ||
1311 | stat = chip->ecc.correct(mtd, p, &ecc_code[i], NULL); | |
1312 | if (stat < 0) | |
1313 | mtd->ecc_stats.failed++; | |
1314 | else | |
1315 | mtd->ecc_stats.corrected += stat; | |
1316 | } | |
1317 | return 0; | |
1318 | } | |
1319 | ||
f5bbdacc | 1320 | /** |
7854d3f7 | 1321 | * nand_read_page_syndrome - [REPLACEABLE] hardware ECC syndrome based page read |
8b6e50c9 BN |
1322 | * @mtd: mtd info structure |
1323 | * @chip: nand chip info structure | |
1324 | * @buf: buffer to store read data | |
1325 | * @page: page number to read | |
f5bbdacc | 1326 | * |
8b6e50c9 BN |
1327 | * The hw generator calculates the error syndrome automatically. Therefore we |
1328 | * need a special oob layout and handling. | |
f5bbdacc TG |
1329 | */ |
1330 | static int nand_read_page_syndrome(struct mtd_info *mtd, struct nand_chip *chip, | |
46a8cf2d | 1331 | uint8_t *buf, int page) |
f5bbdacc TG |
1332 | { |
1333 | int i, eccsize = chip->ecc.size; | |
1334 | int eccbytes = chip->ecc.bytes; | |
1335 | int eccsteps = chip->ecc.steps; | |
1336 | uint8_t *p = buf; | |
f75e5097 | 1337 | uint8_t *oob = chip->oob_poi; |
1da177e4 | 1338 | |
f5bbdacc TG |
1339 | for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { |
1340 | int stat; | |
61b03bd7 | 1341 | |
f5bbdacc TG |
1342 | chip->ecc.hwctl(mtd, NAND_ECC_READ); |
1343 | chip->read_buf(mtd, p, eccsize); | |
1da177e4 | 1344 | |
f5bbdacc TG |
1345 | if (chip->ecc.prepad) { |
1346 | chip->read_buf(mtd, oob, chip->ecc.prepad); | |
1347 | oob += chip->ecc.prepad; | |
1348 | } | |
1da177e4 | 1349 | |
f5bbdacc TG |
1350 | chip->ecc.hwctl(mtd, NAND_ECC_READSYN); |
1351 | chip->read_buf(mtd, oob, eccbytes); | |
1352 | stat = chip->ecc.correct(mtd, p, oob, NULL); | |
61b03bd7 | 1353 | |
c32b8dcc | 1354 | if (stat < 0) |
f5bbdacc | 1355 | mtd->ecc_stats.failed++; |
61b03bd7 | 1356 | else |
f5bbdacc | 1357 | mtd->ecc_stats.corrected += stat; |
61b03bd7 | 1358 | |
f5bbdacc | 1359 | oob += eccbytes; |
1da177e4 | 1360 | |
f5bbdacc TG |
1361 | if (chip->ecc.postpad) { |
1362 | chip->read_buf(mtd, oob, chip->ecc.postpad); | |
1363 | oob += chip->ecc.postpad; | |
61b03bd7 | 1364 | } |
f5bbdacc | 1365 | } |
1da177e4 | 1366 | |
f5bbdacc | 1367 | /* Calculate remaining oob bytes */ |
7e4178f9 | 1368 | i = mtd->oobsize - (oob - chip->oob_poi); |
f5bbdacc TG |
1369 | if (i) |
1370 | chip->read_buf(mtd, oob, i); | |
61b03bd7 | 1371 | |
f5bbdacc TG |
1372 | return 0; |
1373 | } | |
1da177e4 | 1374 | |
f5bbdacc | 1375 | /** |
7854d3f7 | 1376 | * nand_transfer_oob - [INTERN] Transfer oob to client buffer |
8b6e50c9 BN |
1377 | * @chip: nand chip structure |
1378 | * @oob: oob destination address | |
1379 | * @ops: oob ops structure | |
1380 | * @len: size of oob to transfer | |
8593fbc6 TG |
1381 | */ |
1382 | static uint8_t *nand_transfer_oob(struct nand_chip *chip, uint8_t *oob, | |
7014568b | 1383 | struct mtd_oob_ops *ops, size_t len) |
8593fbc6 | 1384 | { |
f8ac0414 | 1385 | switch (ops->mode) { |
8593fbc6 TG |
1386 | |
1387 | case MTD_OOB_PLACE: | |
1388 | case MTD_OOB_RAW: | |
1389 | memcpy(oob, chip->oob_poi + ops->ooboffs, len); | |
1390 | return oob + len; | |
1391 | ||
1392 | case MTD_OOB_AUTO: { | |
1393 | struct nand_oobfree *free = chip->ecc.layout->oobfree; | |
7bc3312b TG |
1394 | uint32_t boffs = 0, roffs = ops->ooboffs; |
1395 | size_t bytes = 0; | |
8593fbc6 | 1396 | |
f8ac0414 | 1397 | for (; free->length && len; free++, len -= bytes) { |
8b6e50c9 | 1398 | /* Read request not from offset 0? */ |
7bc3312b TG |
1399 | if (unlikely(roffs)) { |
1400 | if (roffs >= free->length) { | |
1401 | roffs -= free->length; | |
1402 | continue; | |
1403 | } | |
1404 | boffs = free->offset + roffs; | |
1405 | bytes = min_t(size_t, len, | |
1406 | (free->length - roffs)); | |
1407 | roffs = 0; | |
1408 | } else { | |
1409 | bytes = min_t(size_t, len, free->length); | |
1410 | boffs = free->offset; | |
1411 | } | |
1412 | memcpy(oob, chip->oob_poi + boffs, bytes); | |
8593fbc6 TG |
1413 | oob += bytes; |
1414 | } | |
1415 | return oob; | |
1416 | } | |
1417 | default: | |
1418 | BUG(); | |
1419 | } | |
1420 | return NULL; | |
1421 | } | |
1422 | ||
1423 | /** | |
7854d3f7 | 1424 | * nand_do_read_ops - [INTERN] Read data with ECC |
8b6e50c9 BN |
1425 | * @mtd: MTD device structure |
1426 | * @from: offset to read from | |
1427 | * @ops: oob ops structure | |
f5bbdacc TG |
1428 | * |
1429 | * Internal function. Called with chip held. | |
1430 | */ | |
8593fbc6 TG |
1431 | static int nand_do_read_ops(struct mtd_info *mtd, loff_t from, |
1432 | struct mtd_oob_ops *ops) | |
f5bbdacc TG |
1433 | { |
1434 | int chipnr, page, realpage, col, bytes, aligned; | |
1435 | struct nand_chip *chip = mtd->priv; | |
1436 | struct mtd_ecc_stats stats; | |
1437 | int blkcheck = (1 << (chip->phys_erase_shift - chip->page_shift)) - 1; | |
1438 | int sndcmd = 1; | |
1439 | int ret = 0; | |
8593fbc6 | 1440 | uint32_t readlen = ops->len; |
7014568b | 1441 | uint32_t oobreadlen = ops->ooblen; |
9aca334e ML |
1442 | uint32_t max_oobsize = ops->mode == MTD_OOB_AUTO ? |
1443 | mtd->oobavail : mtd->oobsize; | |
1444 | ||
8593fbc6 | 1445 | uint8_t *bufpoi, *oob, *buf; |
1da177e4 | 1446 | |
f5bbdacc | 1447 | stats = mtd->ecc_stats; |
1da177e4 | 1448 | |
f5bbdacc TG |
1449 | chipnr = (int)(from >> chip->chip_shift); |
1450 | chip->select_chip(mtd, chipnr); | |
61b03bd7 | 1451 | |
f5bbdacc TG |
1452 | realpage = (int)(from >> chip->page_shift); |
1453 | page = realpage & chip->pagemask; | |
1da177e4 | 1454 | |
f5bbdacc | 1455 | col = (int)(from & (mtd->writesize - 1)); |
61b03bd7 | 1456 | |
8593fbc6 TG |
1457 | buf = ops->datbuf; |
1458 | oob = ops->oobbuf; | |
1459 | ||
f8ac0414 | 1460 | while (1) { |
f5bbdacc TG |
1461 | bytes = min(mtd->writesize - col, readlen); |
1462 | aligned = (bytes == mtd->writesize); | |
61b03bd7 | 1463 | |
8b6e50c9 | 1464 | /* Is the current page in the buffer? */ |
8593fbc6 | 1465 | if (realpage != chip->pagebuf || oob) { |
4bf63fcb | 1466 | bufpoi = aligned ? buf : chip->buffers->databuf; |
61b03bd7 | 1467 | |
f5bbdacc TG |
1468 | if (likely(sndcmd)) { |
1469 | chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page); | |
1470 | sndcmd = 0; | |
1da177e4 | 1471 | } |
1da177e4 | 1472 | |
f5bbdacc | 1473 | /* Now read the page into the buffer */ |
956e944c | 1474 | if (unlikely(ops->mode == MTD_OOB_RAW)) |
46a8cf2d SN |
1475 | ret = chip->ecc.read_page_raw(mtd, chip, |
1476 | bufpoi, page); | |
3d459559 | 1477 | else if (!aligned && NAND_SUBPAGE_READ(chip) && !oob) |
7351d3a5 FF |
1478 | ret = chip->ecc.read_subpage(mtd, chip, |
1479 | col, bytes, bufpoi); | |
956e944c | 1480 | else |
46a8cf2d SN |
1481 | ret = chip->ecc.read_page(mtd, chip, bufpoi, |
1482 | page); | |
f5bbdacc | 1483 | if (ret < 0) |
1da177e4 | 1484 | break; |
f5bbdacc TG |
1485 | |
1486 | /* Transfer not aligned data */ | |
1487 | if (!aligned) { | |
c1194c79 AB |
1488 | if (!NAND_SUBPAGE_READ(chip) && !oob && |
1489 | !(mtd->ecc_stats.failed - stats.failed)) | |
3d459559 | 1490 | chip->pagebuf = realpage; |
4bf63fcb | 1491 | memcpy(buf, chip->buffers->databuf + col, bytes); |
f5bbdacc TG |
1492 | } |
1493 | ||
8593fbc6 TG |
1494 | buf += bytes; |
1495 | ||
1496 | if (unlikely(oob)) { | |
9aca334e | 1497 | |
b64d39d8 ML |
1498 | int toread = min(oobreadlen, max_oobsize); |
1499 | ||
1500 | if (toread) { | |
1501 | oob = nand_transfer_oob(chip, | |
1502 | oob, ops, toread); | |
1503 | oobreadlen -= toread; | |
1504 | } | |
8593fbc6 TG |
1505 | } |
1506 | ||
f5bbdacc TG |
1507 | if (!(chip->options & NAND_NO_READRDY)) { |
1508 | /* | |
1509 | * Apply delay or wait for ready/busy pin. Do | |
1510 | * this before the AUTOINCR check, so no | |
1511 | * problems arise if a chip which does auto | |
1512 | * increment is marked as NOAUTOINCR by the | |
1513 | * board driver. | |
1514 | */ | |
1515 | if (!chip->dev_ready) | |
1516 | udelay(chip->chip_delay); | |
1517 | else | |
1518 | nand_wait_ready(mtd); | |
1da177e4 | 1519 | } |
8593fbc6 | 1520 | } else { |
4bf63fcb | 1521 | memcpy(buf, chip->buffers->databuf + col, bytes); |
8593fbc6 TG |
1522 | buf += bytes; |
1523 | } | |
1da177e4 | 1524 | |
f5bbdacc | 1525 | readlen -= bytes; |
61b03bd7 | 1526 | |
f5bbdacc | 1527 | if (!readlen) |
61b03bd7 | 1528 | break; |
1da177e4 | 1529 | |
8b6e50c9 | 1530 | /* For subsequent reads align to page boundary */ |
1da177e4 LT |
1531 | col = 0; |
1532 | /* Increment page address */ | |
1533 | realpage++; | |
1534 | ||
ace4dfee | 1535 | page = realpage & chip->pagemask; |
1da177e4 LT |
1536 | /* Check, if we cross a chip boundary */ |
1537 | if (!page) { | |
1538 | chipnr++; | |
ace4dfee TG |
1539 | chip->select_chip(mtd, -1); |
1540 | chip->select_chip(mtd, chipnr); | |
1da177e4 | 1541 | } |
f5bbdacc | 1542 | |
8b6e50c9 BN |
1543 | /* |
1544 | * Check, if the chip supports auto page increment or if we | |
1545 | * have hit a block boundary. | |
e0c7d767 | 1546 | */ |
f5bbdacc | 1547 | if (!NAND_CANAUTOINCR(chip) || !(page & blkcheck)) |
61b03bd7 | 1548 | sndcmd = 1; |
1da177e4 LT |
1549 | } |
1550 | ||
8593fbc6 | 1551 | ops->retlen = ops->len - (size_t) readlen; |
7014568b VW |
1552 | if (oob) |
1553 | ops->oobretlen = ops->ooblen - oobreadlen; | |
1da177e4 | 1554 | |
f5bbdacc TG |
1555 | if (ret) |
1556 | return ret; | |
1557 | ||
9a1fcdfd TG |
1558 | if (mtd->ecc_stats.failed - stats.failed) |
1559 | return -EBADMSG; | |
1560 | ||
1561 | return mtd->ecc_stats.corrected - stats.corrected ? -EUCLEAN : 0; | |
f5bbdacc TG |
1562 | } |
1563 | ||
1564 | /** | |
25985edc | 1565 | * nand_read - [MTD Interface] MTD compatibility function for nand_do_read_ecc |
8b6e50c9 BN |
1566 | * @mtd: MTD device structure |
1567 | * @from: offset to read from | |
1568 | * @len: number of bytes to read | |
1569 | * @retlen: pointer to variable to store the number of read bytes | |
1570 | * @buf: the databuffer to put data | |
f5bbdacc | 1571 | * |
8b6e50c9 | 1572 | * Get hold of the chip and call nand_do_read. |
f5bbdacc TG |
1573 | */ |
1574 | static int nand_read(struct mtd_info *mtd, loff_t from, size_t len, | |
1575 | size_t *retlen, uint8_t *buf) | |
1576 | { | |
8593fbc6 | 1577 | struct nand_chip *chip = mtd->priv; |
f5bbdacc TG |
1578 | int ret; |
1579 | ||
f5bbdacc TG |
1580 | /* Do not allow reads past end of device */ |
1581 | if ((from + len) > mtd->size) | |
1582 | return -EINVAL; | |
1583 | if (!len) | |
1584 | return 0; | |
1585 | ||
8593fbc6 | 1586 | nand_get_device(chip, mtd, FL_READING); |
f5bbdacc | 1587 | |
8593fbc6 TG |
1588 | chip->ops.len = len; |
1589 | chip->ops.datbuf = buf; | |
1590 | chip->ops.oobbuf = NULL; | |
1591 | ||
1592 | ret = nand_do_read_ops(mtd, from, &chip->ops); | |
f5bbdacc | 1593 | |
7fd5aecc RP |
1594 | *retlen = chip->ops.retlen; |
1595 | ||
f5bbdacc TG |
1596 | nand_release_device(mtd); |
1597 | ||
1598 | return ret; | |
1da177e4 LT |
1599 | } |
1600 | ||
7bc3312b | 1601 | /** |
7854d3f7 | 1602 | * nand_read_oob_std - [REPLACEABLE] the most common OOB data read function |
8b6e50c9 BN |
1603 | * @mtd: mtd info structure |
1604 | * @chip: nand chip info structure | |
1605 | * @page: page number to read | |
1606 | * @sndcmd: flag whether to issue read command or not | |
7bc3312b TG |
1607 | */ |
1608 | static int nand_read_oob_std(struct mtd_info *mtd, struct nand_chip *chip, | |
1609 | int page, int sndcmd) | |
1610 | { | |
1611 | if (sndcmd) { | |
1612 | chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page); | |
1613 | sndcmd = 0; | |
1614 | } | |
1615 | chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); | |
1616 | return sndcmd; | |
1617 | } | |
1618 | ||
1619 | /** | |
7854d3f7 | 1620 | * nand_read_oob_syndrome - [REPLACEABLE] OOB data read function for HW ECC |
7bc3312b | 1621 | * with syndromes |
8b6e50c9 BN |
1622 | * @mtd: mtd info structure |
1623 | * @chip: nand chip info structure | |
1624 | * @page: page number to read | |
1625 | * @sndcmd: flag whether to issue read command or not | |
7bc3312b TG |
1626 | */ |
1627 | static int nand_read_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip, | |
1628 | int page, int sndcmd) | |
1629 | { | |
1630 | uint8_t *buf = chip->oob_poi; | |
1631 | int length = mtd->oobsize; | |
1632 | int chunk = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad; | |
1633 | int eccsize = chip->ecc.size; | |
1634 | uint8_t *bufpoi = buf; | |
1635 | int i, toread, sndrnd = 0, pos; | |
1636 | ||
1637 | chip->cmdfunc(mtd, NAND_CMD_READ0, chip->ecc.size, page); | |
1638 | for (i = 0; i < chip->ecc.steps; i++) { | |
1639 | if (sndrnd) { | |
1640 | pos = eccsize + i * (eccsize + chunk); | |
1641 | if (mtd->writesize > 512) | |
1642 | chip->cmdfunc(mtd, NAND_CMD_RNDOUT, pos, -1); | |
1643 | else | |
1644 | chip->cmdfunc(mtd, NAND_CMD_READ0, pos, page); | |
1645 | } else | |
1646 | sndrnd = 1; | |
1647 | toread = min_t(int, length, chunk); | |
1648 | chip->read_buf(mtd, bufpoi, toread); | |
1649 | bufpoi += toread; | |
1650 | length -= toread; | |
1651 | } | |
1652 | if (length > 0) | |
1653 | chip->read_buf(mtd, bufpoi, length); | |
1654 | ||
1655 | return 1; | |
1656 | } | |
1657 | ||
1658 | /** | |
7854d3f7 | 1659 | * nand_write_oob_std - [REPLACEABLE] the most common OOB data write function |
8b6e50c9 BN |
1660 | * @mtd: mtd info structure |
1661 | * @chip: nand chip info structure | |
1662 | * @page: page number to write | |
7bc3312b TG |
1663 | */ |
1664 | static int nand_write_oob_std(struct mtd_info *mtd, struct nand_chip *chip, | |
1665 | int page) | |
1666 | { | |
1667 | int status = 0; | |
1668 | const uint8_t *buf = chip->oob_poi; | |
1669 | int length = mtd->oobsize; | |
1670 | ||
1671 | chip->cmdfunc(mtd, NAND_CMD_SEQIN, mtd->writesize, page); | |
1672 | chip->write_buf(mtd, buf, length); | |
1673 | /* Send command to program the OOB data */ | |
1674 | chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1); | |
1675 | ||
1676 | status = chip->waitfunc(mtd, chip); | |
1677 | ||
0d420f9d | 1678 | return status & NAND_STATUS_FAIL ? -EIO : 0; |
7bc3312b TG |
1679 | } |
1680 | ||
1681 | /** | |
7854d3f7 | 1682 | * nand_write_oob_syndrome - [REPLACEABLE] OOB data write function for HW ECC |
8b6e50c9 BN |
1683 | * with syndrome - only for large page flash |
1684 | * @mtd: mtd info structure | |
1685 | * @chip: nand chip info structure | |
1686 | * @page: page number to write | |
7bc3312b TG |
1687 | */ |
1688 | static int nand_write_oob_syndrome(struct mtd_info *mtd, | |
1689 | struct nand_chip *chip, int page) | |
1690 | { | |
1691 | int chunk = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad; | |
1692 | int eccsize = chip->ecc.size, length = mtd->oobsize; | |
1693 | int i, len, pos, status = 0, sndcmd = 0, steps = chip->ecc.steps; | |
1694 | const uint8_t *bufpoi = chip->oob_poi; | |
1695 | ||
1696 | /* | |
1697 | * data-ecc-data-ecc ... ecc-oob | |
1698 | * or | |
1699 | * data-pad-ecc-pad-data-pad .... ecc-pad-oob | |
1700 | */ | |
1701 | if (!chip->ecc.prepad && !chip->ecc.postpad) { | |
1702 | pos = steps * (eccsize + chunk); | |
1703 | steps = 0; | |
1704 | } else | |
8b0036ee | 1705 | pos = eccsize; |
7bc3312b TG |
1706 | |
1707 | chip->cmdfunc(mtd, NAND_CMD_SEQIN, pos, page); | |
1708 | for (i = 0; i < steps; i++) { | |
1709 | if (sndcmd) { | |
1710 | if (mtd->writesize <= 512) { | |
1711 | uint32_t fill = 0xFFFFFFFF; | |
1712 | ||
1713 | len = eccsize; | |
1714 | while (len > 0) { | |
1715 | int num = min_t(int, len, 4); | |
1716 | chip->write_buf(mtd, (uint8_t *)&fill, | |
1717 | num); | |
1718 | len -= num; | |
1719 | } | |
1720 | } else { | |
1721 | pos = eccsize + i * (eccsize + chunk); | |
1722 | chip->cmdfunc(mtd, NAND_CMD_RNDIN, pos, -1); | |
1723 | } | |
1724 | } else | |
1725 | sndcmd = 1; | |
1726 | len = min_t(int, length, chunk); | |
1727 | chip->write_buf(mtd, bufpoi, len); | |
1728 | bufpoi += len; | |
1729 | length -= len; | |
1730 | } | |
1731 | if (length > 0) | |
1732 | chip->write_buf(mtd, bufpoi, length); | |
1733 | ||
1734 | chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1); | |
1735 | status = chip->waitfunc(mtd, chip); | |
1736 | ||
1737 | return status & NAND_STATUS_FAIL ? -EIO : 0; | |
1738 | } | |
1739 | ||
1da177e4 | 1740 | /** |
7854d3f7 | 1741 | * nand_do_read_oob - [INTERN] NAND read out-of-band |
8b6e50c9 BN |
1742 | * @mtd: MTD device structure |
1743 | * @from: offset to read from | |
1744 | * @ops: oob operations description structure | |
1da177e4 | 1745 | * |
8b6e50c9 | 1746 | * NAND read out-of-band data from the spare area. |
1da177e4 | 1747 | */ |
8593fbc6 TG |
1748 | static int nand_do_read_oob(struct mtd_info *mtd, loff_t from, |
1749 | struct mtd_oob_ops *ops) | |
1da177e4 | 1750 | { |
7bc3312b | 1751 | int page, realpage, chipnr, sndcmd = 1; |
ace4dfee | 1752 | struct nand_chip *chip = mtd->priv; |
041e4575 | 1753 | struct mtd_ecc_stats stats; |
7314e9e7 | 1754 | int blkcheck = (1 << (chip->phys_erase_shift - chip->page_shift)) - 1; |
7014568b VW |
1755 | int readlen = ops->ooblen; |
1756 | int len; | |
7bc3312b | 1757 | uint8_t *buf = ops->oobbuf; |
61b03bd7 | 1758 | |
20d8e248 | 1759 | DEBUG(MTD_DEBUG_LEVEL3, "%s: from = 0x%08Lx, len = %i\n", |
1760 | __func__, (unsigned long long)from, readlen); | |
1da177e4 | 1761 | |
041e4575 BN |
1762 | stats = mtd->ecc_stats; |
1763 | ||
03736155 | 1764 | if (ops->mode == MTD_OOB_AUTO) |
7014568b | 1765 | len = chip->ecc.layout->oobavail; |
03736155 AH |
1766 | else |
1767 | len = mtd->oobsize; | |
1768 | ||
1769 | if (unlikely(ops->ooboffs >= len)) { | |
20d8e248 | 1770 | DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt to start read " |
1771 | "outside oob\n", __func__); | |
03736155 AH |
1772 | return -EINVAL; |
1773 | } | |
1774 | ||
1775 | /* Do not allow reads past end of device */ | |
1776 | if (unlikely(from >= mtd->size || | |
1777 | ops->ooboffs + readlen > ((mtd->size >> chip->page_shift) - | |
1778 | (from >> chip->page_shift)) * len)) { | |
20d8e248 | 1779 | DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt read beyond end " |
1780 | "of device\n", __func__); | |
03736155 AH |
1781 | return -EINVAL; |
1782 | } | |
7014568b | 1783 | |
7314e9e7 | 1784 | chipnr = (int)(from >> chip->chip_shift); |
ace4dfee | 1785 | chip->select_chip(mtd, chipnr); |
1da177e4 | 1786 | |
7314e9e7 TG |
1787 | /* Shift to get page */ |
1788 | realpage = (int)(from >> chip->page_shift); | |
1789 | page = realpage & chip->pagemask; | |
1da177e4 | 1790 | |
f8ac0414 | 1791 | while (1) { |
7bc3312b | 1792 | sndcmd = chip->ecc.read_oob(mtd, chip, page, sndcmd); |
7014568b VW |
1793 | |
1794 | len = min(len, readlen); | |
1795 | buf = nand_transfer_oob(chip, buf, ops, len); | |
8593fbc6 | 1796 | |
7314e9e7 TG |
1797 | if (!(chip->options & NAND_NO_READRDY)) { |
1798 | /* | |
1799 | * Apply delay or wait for ready/busy pin. Do this | |
1800 | * before the AUTOINCR check, so no problems arise if a | |
1801 | * chip which does auto increment is marked as | |
1802 | * NOAUTOINCR by the board driver. | |
19870da7 | 1803 | */ |
ace4dfee TG |
1804 | if (!chip->dev_ready) |
1805 | udelay(chip->chip_delay); | |
19870da7 TG |
1806 | else |
1807 | nand_wait_ready(mtd); | |
7314e9e7 | 1808 | } |
19870da7 | 1809 | |
7014568b | 1810 | readlen -= len; |
0d420f9d SZ |
1811 | if (!readlen) |
1812 | break; | |
1813 | ||
7314e9e7 TG |
1814 | /* Increment page address */ |
1815 | realpage++; | |
1816 | ||
1817 | page = realpage & chip->pagemask; | |
1818 | /* Check, if we cross a chip boundary */ | |
1819 | if (!page) { | |
1820 | chipnr++; | |
1821 | chip->select_chip(mtd, -1); | |
1822 | chip->select_chip(mtd, chipnr); | |
1da177e4 | 1823 | } |
7314e9e7 | 1824 | |
8b6e50c9 BN |
1825 | /* |
1826 | * Check, if the chip supports auto page increment or if we | |
1827 | * have hit a block boundary. | |
7314e9e7 TG |
1828 | */ |
1829 | if (!NAND_CANAUTOINCR(chip) || !(page & blkcheck)) | |
1830 | sndcmd = 1; | |
1da177e4 LT |
1831 | } |
1832 | ||
7014568b | 1833 | ops->oobretlen = ops->ooblen; |
041e4575 BN |
1834 | |
1835 | if (mtd->ecc_stats.failed - stats.failed) | |
1836 | return -EBADMSG; | |
1837 | ||
1838 | return mtd->ecc_stats.corrected - stats.corrected ? -EUCLEAN : 0; | |
1da177e4 LT |
1839 | } |
1840 | ||
1841 | /** | |
8593fbc6 | 1842 | * nand_read_oob - [MTD Interface] NAND read data and/or out-of-band |
8b6e50c9 BN |
1843 | * @mtd: MTD device structure |
1844 | * @from: offset to read from | |
1845 | * @ops: oob operation description structure | |
1da177e4 | 1846 | * |
8b6e50c9 | 1847 | * NAND read data and/or out-of-band data. |
1da177e4 | 1848 | */ |
8593fbc6 TG |
1849 | static int nand_read_oob(struct mtd_info *mtd, loff_t from, |
1850 | struct mtd_oob_ops *ops) | |
1da177e4 | 1851 | { |
ace4dfee | 1852 | struct nand_chip *chip = mtd->priv; |
8593fbc6 TG |
1853 | int ret = -ENOTSUPP; |
1854 | ||
1855 | ops->retlen = 0; | |
1da177e4 LT |
1856 | |
1857 | /* Do not allow reads past end of device */ | |
7014568b | 1858 | if (ops->datbuf && (from + ops->len) > mtd->size) { |
20d8e248 | 1859 | DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt read " |
1860 | "beyond end of device\n", __func__); | |
1da177e4 LT |
1861 | return -EINVAL; |
1862 | } | |
1863 | ||
ace4dfee | 1864 | nand_get_device(chip, mtd, FL_READING); |
1da177e4 | 1865 | |
f8ac0414 | 1866 | switch (ops->mode) { |
8593fbc6 TG |
1867 | case MTD_OOB_PLACE: |
1868 | case MTD_OOB_AUTO: | |
8593fbc6 | 1869 | case MTD_OOB_RAW: |
8593fbc6 | 1870 | break; |
1da177e4 | 1871 | |
8593fbc6 TG |
1872 | default: |
1873 | goto out; | |
1874 | } | |
1da177e4 | 1875 | |
8593fbc6 TG |
1876 | if (!ops->datbuf) |
1877 | ret = nand_do_read_oob(mtd, from, ops); | |
1878 | else | |
1879 | ret = nand_do_read_ops(mtd, from, ops); | |
61b03bd7 | 1880 | |
7351d3a5 | 1881 | out: |
8593fbc6 TG |
1882 | nand_release_device(mtd); |
1883 | return ret; | |
1884 | } | |
61b03bd7 | 1885 | |
1da177e4 | 1886 | |
8593fbc6 | 1887 | /** |
7854d3f7 | 1888 | * nand_write_page_raw - [INTERN] raw page write function |
8b6e50c9 BN |
1889 | * @mtd: mtd info structure |
1890 | * @chip: nand chip info structure | |
1891 | * @buf: data buffer | |
52ff49df | 1892 | * |
7854d3f7 | 1893 | * Not for syndrome calculating ECC controllers, which use a special oob layout. |
8593fbc6 TG |
1894 | */ |
1895 | static void nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip, | |
1896 | const uint8_t *buf) | |
1897 | { | |
1898 | chip->write_buf(mtd, buf, mtd->writesize); | |
1899 | chip->write_buf(mtd, chip->oob_poi, mtd->oobsize); | |
1da177e4 LT |
1900 | } |
1901 | ||
52ff49df | 1902 | /** |
7854d3f7 | 1903 | * nand_write_page_raw_syndrome - [INTERN] raw page write function |
8b6e50c9 BN |
1904 | * @mtd: mtd info structure |
1905 | * @chip: nand chip info structure | |
1906 | * @buf: data buffer | |
52ff49df DB |
1907 | * |
1908 | * We need a special oob layout and handling even when ECC isn't checked. | |
1909 | */ | |
7351d3a5 FF |
1910 | static void nand_write_page_raw_syndrome(struct mtd_info *mtd, |
1911 | struct nand_chip *chip, | |
1912 | const uint8_t *buf) | |
52ff49df DB |
1913 | { |
1914 | int eccsize = chip->ecc.size; | |
1915 | int eccbytes = chip->ecc.bytes; | |
1916 | uint8_t *oob = chip->oob_poi; | |
1917 | int steps, size; | |
1918 | ||
1919 | for (steps = chip->ecc.steps; steps > 0; steps--) { | |
1920 | chip->write_buf(mtd, buf, eccsize); | |
1921 | buf += eccsize; | |
1922 | ||
1923 | if (chip->ecc.prepad) { | |
1924 | chip->write_buf(mtd, oob, chip->ecc.prepad); | |
1925 | oob += chip->ecc.prepad; | |
1926 | } | |
1927 | ||
1928 | chip->read_buf(mtd, oob, eccbytes); | |
1929 | oob += eccbytes; | |
1930 | ||
1931 | if (chip->ecc.postpad) { | |
1932 | chip->write_buf(mtd, oob, chip->ecc.postpad); | |
1933 | oob += chip->ecc.postpad; | |
1934 | } | |
1935 | } | |
1936 | ||
1937 | size = mtd->oobsize - (oob - chip->oob_poi); | |
1938 | if (size) | |
1939 | chip->write_buf(mtd, oob, size); | |
1940 | } | |
9223a456 | 1941 | /** |
7854d3f7 | 1942 | * nand_write_page_swecc - [REPLACEABLE] software ECC based page write function |
8b6e50c9 BN |
1943 | * @mtd: mtd info structure |
1944 | * @chip: nand chip info structure | |
1945 | * @buf: data buffer | |
9223a456 | 1946 | */ |
f75e5097 TG |
1947 | static void nand_write_page_swecc(struct mtd_info *mtd, struct nand_chip *chip, |
1948 | const uint8_t *buf) | |
9223a456 | 1949 | { |
f75e5097 TG |
1950 | int i, eccsize = chip->ecc.size; |
1951 | int eccbytes = chip->ecc.bytes; | |
1952 | int eccsteps = chip->ecc.steps; | |
4bf63fcb | 1953 | uint8_t *ecc_calc = chip->buffers->ecccalc; |
f75e5097 | 1954 | const uint8_t *p = buf; |
8b099a39 | 1955 | uint32_t *eccpos = chip->ecc.layout->eccpos; |
9223a456 | 1956 | |
7854d3f7 | 1957 | /* Software ECC calculation */ |
8593fbc6 TG |
1958 | for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) |
1959 | chip->ecc.calculate(mtd, p, &ecc_calc[i]); | |
9223a456 | 1960 | |
8593fbc6 TG |
1961 | for (i = 0; i < chip->ecc.total; i++) |
1962 | chip->oob_poi[eccpos[i]] = ecc_calc[i]; | |
9223a456 | 1963 | |
90424de8 | 1964 | chip->ecc.write_page_raw(mtd, chip, buf); |
f75e5097 | 1965 | } |
9223a456 | 1966 | |
f75e5097 | 1967 | /** |
7854d3f7 | 1968 | * nand_write_page_hwecc - [REPLACEABLE] hardware ECC based page write function |
8b6e50c9 BN |
1969 | * @mtd: mtd info structure |
1970 | * @chip: nand chip info structure | |
1971 | * @buf: data buffer | |
f75e5097 TG |
1972 | */ |
1973 | static void nand_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, | |
1974 | const uint8_t *buf) | |
1975 | { | |
1976 | int i, eccsize = chip->ecc.size; | |
1977 | int eccbytes = chip->ecc.bytes; | |
1978 | int eccsteps = chip->ecc.steps; | |
4bf63fcb | 1979 | uint8_t *ecc_calc = chip->buffers->ecccalc; |
f75e5097 | 1980 | const uint8_t *p = buf; |
8b099a39 | 1981 | uint32_t *eccpos = chip->ecc.layout->eccpos; |
9223a456 | 1982 | |
f75e5097 TG |
1983 | for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { |
1984 | chip->ecc.hwctl(mtd, NAND_ECC_WRITE); | |
29da9cea | 1985 | chip->write_buf(mtd, p, eccsize); |
f75e5097 | 1986 | chip->ecc.calculate(mtd, p, &ecc_calc[i]); |
9223a456 TG |
1987 | } |
1988 | ||
f75e5097 TG |
1989 | for (i = 0; i < chip->ecc.total; i++) |
1990 | chip->oob_poi[eccpos[i]] = ecc_calc[i]; | |
1991 | ||
1992 | chip->write_buf(mtd, chip->oob_poi, mtd->oobsize); | |
9223a456 TG |
1993 | } |
1994 | ||
61b03bd7 | 1995 | /** |
7854d3f7 | 1996 | * nand_write_page_syndrome - [REPLACEABLE] hardware ECC syndrome based page write |
8b6e50c9 BN |
1997 | * @mtd: mtd info structure |
1998 | * @chip: nand chip info structure | |
1999 | * @buf: data buffer | |
1da177e4 | 2000 | * |
8b6e50c9 BN |
2001 | * The hw generator calculates the error syndrome automatically. Therefore we |
2002 | * need a special oob layout and handling. | |
f75e5097 TG |
2003 | */ |
2004 | static void nand_write_page_syndrome(struct mtd_info *mtd, | |
2005 | struct nand_chip *chip, const uint8_t *buf) | |
1da177e4 | 2006 | { |
f75e5097 TG |
2007 | int i, eccsize = chip->ecc.size; |
2008 | int eccbytes = chip->ecc.bytes; | |
2009 | int eccsteps = chip->ecc.steps; | |
2010 | const uint8_t *p = buf; | |
2011 | uint8_t *oob = chip->oob_poi; | |
1da177e4 | 2012 | |
f75e5097 | 2013 | for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { |
1da177e4 | 2014 | |
f75e5097 TG |
2015 | chip->ecc.hwctl(mtd, NAND_ECC_WRITE); |
2016 | chip->write_buf(mtd, p, eccsize); | |
61b03bd7 | 2017 | |
f75e5097 TG |
2018 | if (chip->ecc.prepad) { |
2019 | chip->write_buf(mtd, oob, chip->ecc.prepad); | |
2020 | oob += chip->ecc.prepad; | |
2021 | } | |
2022 | ||
2023 | chip->ecc.calculate(mtd, p, oob); | |
2024 | chip->write_buf(mtd, oob, eccbytes); | |
2025 | oob += eccbytes; | |
2026 | ||
2027 | if (chip->ecc.postpad) { | |
2028 | chip->write_buf(mtd, oob, chip->ecc.postpad); | |
2029 | oob += chip->ecc.postpad; | |
1da177e4 | 2030 | } |
1da177e4 | 2031 | } |
f75e5097 TG |
2032 | |
2033 | /* Calculate remaining oob bytes */ | |
7e4178f9 | 2034 | i = mtd->oobsize - (oob - chip->oob_poi); |
f75e5097 TG |
2035 | if (i) |
2036 | chip->write_buf(mtd, oob, i); | |
2037 | } | |
2038 | ||
2039 | /** | |
956e944c | 2040 | * nand_write_page - [REPLACEABLE] write one page |
8b6e50c9 BN |
2041 | * @mtd: MTD device structure |
2042 | * @chip: NAND chip descriptor | |
2043 | * @buf: the data to write | |
2044 | * @page: page number to write | |
2045 | * @cached: cached programming | |
2046 | * @raw: use _raw version of write_page | |
f75e5097 TG |
2047 | */ |
2048 | static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip, | |
956e944c | 2049 | const uint8_t *buf, int page, int cached, int raw) |
f75e5097 TG |
2050 | { |
2051 | int status; | |
2052 | ||
2053 | chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page); | |
2054 | ||
956e944c DW |
2055 | if (unlikely(raw)) |
2056 | chip->ecc.write_page_raw(mtd, chip, buf); | |
2057 | else | |
2058 | chip->ecc.write_page(mtd, chip, buf); | |
f75e5097 TG |
2059 | |
2060 | /* | |
7854d3f7 | 2061 | * Cached progamming disabled for now. Not sure if it's worth the |
8b6e50c9 | 2062 | * trouble. The speed gain is not very impressive. (2.3->2.6Mib/s). |
f75e5097 TG |
2063 | */ |
2064 | cached = 0; | |
2065 | ||
2066 | if (!cached || !(chip->options & NAND_CACHEPRG)) { | |
2067 | ||
2068 | chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1); | |
7bc3312b | 2069 | status = chip->waitfunc(mtd, chip); |
f75e5097 TG |
2070 | /* |
2071 | * See if operation failed and additional status checks are | |
8b6e50c9 | 2072 | * available. |
f75e5097 TG |
2073 | */ |
2074 | if ((status & NAND_STATUS_FAIL) && (chip->errstat)) | |
2075 | status = chip->errstat(mtd, chip, FL_WRITING, status, | |
2076 | page); | |
2077 | ||
2078 | if (status & NAND_STATUS_FAIL) | |
2079 | return -EIO; | |
2080 | } else { | |
2081 | chip->cmdfunc(mtd, NAND_CMD_CACHEDPROG, -1, -1); | |
7bc3312b | 2082 | status = chip->waitfunc(mtd, chip); |
f75e5097 TG |
2083 | } |
2084 | ||
2085 | #ifdef CONFIG_MTD_NAND_VERIFY_WRITE | |
2086 | /* Send command to read back the data */ | |
2087 | chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page); | |
2088 | ||
2089 | if (chip->verify_buf(mtd, buf, mtd->writesize)) | |
2090 | return -EIO; | |
2091 | #endif | |
2092 | return 0; | |
1da177e4 LT |
2093 | } |
2094 | ||
8593fbc6 | 2095 | /** |
7854d3f7 | 2096 | * nand_fill_oob - [INTERN] Transfer client buffer to oob |
f722013e | 2097 | * @mtd: MTD device structure |
8b6e50c9 BN |
2098 | * @oob: oob data buffer |
2099 | * @len: oob data write length | |
2100 | * @ops: oob ops structure | |
8593fbc6 | 2101 | */ |
f722013e TAA |
2102 | static uint8_t *nand_fill_oob(struct mtd_info *mtd, uint8_t *oob, size_t len, |
2103 | struct mtd_oob_ops *ops) | |
8593fbc6 | 2104 | { |
f722013e TAA |
2105 | struct nand_chip *chip = mtd->priv; |
2106 | ||
2107 | /* | |
2108 | * Initialise to all 0xFF, to avoid the possibility of left over OOB | |
2109 | * data from a previous OOB read. | |
2110 | */ | |
2111 | memset(chip->oob_poi, 0xff, mtd->oobsize); | |
2112 | ||
f8ac0414 | 2113 | switch (ops->mode) { |
8593fbc6 TG |
2114 | |
2115 | case MTD_OOB_PLACE: | |
2116 | case MTD_OOB_RAW: | |
2117 | memcpy(chip->oob_poi + ops->ooboffs, oob, len); | |
2118 | return oob + len; | |
2119 | ||
2120 | case MTD_OOB_AUTO: { | |
2121 | struct nand_oobfree *free = chip->ecc.layout->oobfree; | |
7bc3312b TG |
2122 | uint32_t boffs = 0, woffs = ops->ooboffs; |
2123 | size_t bytes = 0; | |
8593fbc6 | 2124 | |
f8ac0414 | 2125 | for (; free->length && len; free++, len -= bytes) { |
8b6e50c9 | 2126 | /* Write request not from offset 0? */ |
7bc3312b TG |
2127 | if (unlikely(woffs)) { |
2128 | if (woffs >= free->length) { | |
2129 | woffs -= free->length; | |
2130 | continue; | |
2131 | } | |
2132 | boffs = free->offset + woffs; | |
2133 | bytes = min_t(size_t, len, | |
2134 | (free->length - woffs)); | |
2135 | woffs = 0; | |
2136 | } else { | |
2137 | bytes = min_t(size_t, len, free->length); | |
2138 | boffs = free->offset; | |
2139 | } | |
8b0036ee | 2140 | memcpy(chip->oob_poi + boffs, oob, bytes); |
8593fbc6 TG |
2141 | oob += bytes; |
2142 | } | |
2143 | return oob; | |
2144 | } | |
2145 | default: | |
2146 | BUG(); | |
2147 | } | |
2148 | return NULL; | |
2149 | } | |
2150 | ||
f8ac0414 | 2151 | #define NOTALIGNED(x) ((x & (chip->subpagesize - 1)) != 0) |
1da177e4 LT |
2152 | |
2153 | /** | |
7854d3f7 | 2154 | * nand_do_write_ops - [INTERN] NAND write with ECC |
8b6e50c9 BN |
2155 | * @mtd: MTD device structure |
2156 | * @to: offset to write to | |
2157 | * @ops: oob operations description structure | |
1da177e4 | 2158 | * |
8b6e50c9 | 2159 | * NAND write with ECC. |
1da177e4 | 2160 | */ |
8593fbc6 TG |
2161 | static int nand_do_write_ops(struct mtd_info *mtd, loff_t to, |
2162 | struct mtd_oob_ops *ops) | |
1da177e4 | 2163 | { |
29072b96 | 2164 | int chipnr, realpage, page, blockmask, column; |
ace4dfee | 2165 | struct nand_chip *chip = mtd->priv; |
8593fbc6 | 2166 | uint32_t writelen = ops->len; |
782ce79a ML |
2167 | |
2168 | uint32_t oobwritelen = ops->ooblen; | |
2169 | uint32_t oobmaxlen = ops->mode == MTD_OOB_AUTO ? | |
2170 | mtd->oobavail : mtd->oobsize; | |
2171 | ||
8593fbc6 TG |
2172 | uint8_t *oob = ops->oobbuf; |
2173 | uint8_t *buf = ops->datbuf; | |
29072b96 | 2174 | int ret, subpage; |
1da177e4 | 2175 | |
8593fbc6 | 2176 | ops->retlen = 0; |
29072b96 TG |
2177 | if (!writelen) |
2178 | return 0; | |
1da177e4 | 2179 | |
8b6e50c9 | 2180 | /* Reject writes, which are not page aligned */ |
8593fbc6 | 2181 | if (NOTALIGNED(to) || NOTALIGNED(ops->len)) { |
20d8e248 | 2182 | printk(KERN_NOTICE "%s: Attempt to write not " |
2183 | "page aligned data\n", __func__); | |
1da177e4 LT |
2184 | return -EINVAL; |
2185 | } | |
2186 | ||
29072b96 TG |
2187 | column = to & (mtd->writesize - 1); |
2188 | subpage = column || (writelen & (mtd->writesize - 1)); | |
2189 | ||
2190 | if (subpage && oob) | |
2191 | return -EINVAL; | |
1da177e4 | 2192 | |
6a930961 TG |
2193 | chipnr = (int)(to >> chip->chip_shift); |
2194 | chip->select_chip(mtd, chipnr); | |
2195 | ||
1da177e4 LT |
2196 | /* Check, if it is write protected */ |
2197 | if (nand_check_wp(mtd)) | |
8593fbc6 | 2198 | return -EIO; |
1da177e4 | 2199 | |
f75e5097 TG |
2200 | realpage = (int)(to >> chip->page_shift); |
2201 | page = realpage & chip->pagemask; | |
2202 | blockmask = (1 << (chip->phys_erase_shift - chip->page_shift)) - 1; | |
2203 | ||
2204 | /* Invalidate the page cache, when we write to the cached page */ | |
2205 | if (to <= (chip->pagebuf << chip->page_shift) && | |
8593fbc6 | 2206 | (chip->pagebuf << chip->page_shift) < (to + ops->len)) |
ace4dfee | 2207 | chip->pagebuf = -1; |
61b03bd7 | 2208 | |
782ce79a | 2209 | /* Don't allow multipage oob writes with offset */ |
cdcf12b2 | 2210 | if (oob && ops->ooboffs && (ops->ooboffs + ops->ooblen > oobmaxlen)) |
782ce79a ML |
2211 | return -EINVAL; |
2212 | ||
f8ac0414 | 2213 | while (1) { |
29072b96 | 2214 | int bytes = mtd->writesize; |
f75e5097 | 2215 | int cached = writelen > bytes && page != blockmask; |
29072b96 TG |
2216 | uint8_t *wbuf = buf; |
2217 | ||
8b6e50c9 | 2218 | /* Partial page write? */ |
29072b96 TG |
2219 | if (unlikely(column || writelen < (mtd->writesize - 1))) { |
2220 | cached = 0; | |
2221 | bytes = min_t(int, bytes - column, (int) writelen); | |
2222 | chip->pagebuf = -1; | |
2223 | memset(chip->buffers->databuf, 0xff, mtd->writesize); | |
2224 | memcpy(&chip->buffers->databuf[column], buf, bytes); | |
2225 | wbuf = chip->buffers->databuf; | |
2226 | } | |
1da177e4 | 2227 | |
782ce79a ML |
2228 | if (unlikely(oob)) { |
2229 | size_t len = min(oobwritelen, oobmaxlen); | |
f722013e | 2230 | oob = nand_fill_oob(mtd, oob, len, ops); |
782ce79a | 2231 | oobwritelen -= len; |
f722013e TAA |
2232 | } else { |
2233 | /* We still need to erase leftover OOB data */ | |
2234 | memset(chip->oob_poi, 0xff, mtd->oobsize); | |
782ce79a | 2235 | } |
8593fbc6 | 2236 | |
29072b96 | 2237 | ret = chip->write_page(mtd, chip, wbuf, page, cached, |
956e944c | 2238 | (ops->mode == MTD_OOB_RAW)); |
f75e5097 TG |
2239 | if (ret) |
2240 | break; | |
2241 | ||
2242 | writelen -= bytes; | |
2243 | if (!writelen) | |
2244 | break; | |
2245 | ||
29072b96 | 2246 | column = 0; |
f75e5097 TG |
2247 | buf += bytes; |
2248 | realpage++; | |
2249 | ||
2250 | page = realpage & chip->pagemask; | |
2251 | /* Check, if we cross a chip boundary */ | |
2252 | if (!page) { | |
2253 | chipnr++; | |
2254 | chip->select_chip(mtd, -1); | |
2255 | chip->select_chip(mtd, chipnr); | |
1da177e4 LT |
2256 | } |
2257 | } | |
8593fbc6 | 2258 | |
8593fbc6 | 2259 | ops->retlen = ops->len - writelen; |
7014568b VW |
2260 | if (unlikely(oob)) |
2261 | ops->oobretlen = ops->ooblen; | |
1da177e4 LT |
2262 | return ret; |
2263 | } | |
2264 | ||
2af7c653 SK |
2265 | /** |
2266 | * panic_nand_write - [MTD Interface] NAND write with ECC | |
8b6e50c9 BN |
2267 | * @mtd: MTD device structure |
2268 | * @to: offset to write to | |
2269 | * @len: number of bytes to write | |
2270 | * @retlen: pointer to variable to store the number of written bytes | |
2271 | * @buf: the data to write | |
2af7c653 SK |
2272 | * |
2273 | * NAND write with ECC. Used when performing writes in interrupt context, this | |
2274 | * may for example be called by mtdoops when writing an oops while in panic. | |
2275 | */ | |
2276 | static int panic_nand_write(struct mtd_info *mtd, loff_t to, size_t len, | |
2277 | size_t *retlen, const uint8_t *buf) | |
2278 | { | |
2279 | struct nand_chip *chip = mtd->priv; | |
2280 | int ret; | |
2281 | ||
2282 | /* Do not allow reads past end of device */ | |
2283 | if ((to + len) > mtd->size) | |
2284 | return -EINVAL; | |
2285 | if (!len) | |
2286 | return 0; | |
2287 | ||
8b6e50c9 | 2288 | /* Wait for the device to get ready */ |
2af7c653 SK |
2289 | panic_nand_wait(mtd, chip, 400); |
2290 | ||
8b6e50c9 | 2291 | /* Grab the device */ |
2af7c653 SK |
2292 | panic_nand_get_device(chip, mtd, FL_WRITING); |
2293 | ||
2294 | chip->ops.len = len; | |
2295 | chip->ops.datbuf = (uint8_t *)buf; | |
2296 | chip->ops.oobbuf = NULL; | |
2297 | ||
2298 | ret = nand_do_write_ops(mtd, to, &chip->ops); | |
2299 | ||
2300 | *retlen = chip->ops.retlen; | |
2301 | return ret; | |
2302 | } | |
2303 | ||
f75e5097 | 2304 | /** |
8593fbc6 | 2305 | * nand_write - [MTD Interface] NAND write with ECC |
8b6e50c9 BN |
2306 | * @mtd: MTD device structure |
2307 | * @to: offset to write to | |
2308 | * @len: number of bytes to write | |
2309 | * @retlen: pointer to variable to store the number of written bytes | |
2310 | * @buf: the data to write | |
f75e5097 | 2311 | * |
8b6e50c9 | 2312 | * NAND write with ECC. |
f75e5097 | 2313 | */ |
8593fbc6 TG |
2314 | static int nand_write(struct mtd_info *mtd, loff_t to, size_t len, |
2315 | size_t *retlen, const uint8_t *buf) | |
f75e5097 TG |
2316 | { |
2317 | struct nand_chip *chip = mtd->priv; | |
f75e5097 TG |
2318 | int ret; |
2319 | ||
8593fbc6 TG |
2320 | /* Do not allow reads past end of device */ |
2321 | if ((to + len) > mtd->size) | |
f75e5097 | 2322 | return -EINVAL; |
8593fbc6 TG |
2323 | if (!len) |
2324 | return 0; | |
f75e5097 | 2325 | |
7bc3312b | 2326 | nand_get_device(chip, mtd, FL_WRITING); |
f75e5097 | 2327 | |
8593fbc6 TG |
2328 | chip->ops.len = len; |
2329 | chip->ops.datbuf = (uint8_t *)buf; | |
2330 | chip->ops.oobbuf = NULL; | |
f75e5097 | 2331 | |
8593fbc6 | 2332 | ret = nand_do_write_ops(mtd, to, &chip->ops); |
f75e5097 | 2333 | |
7fd5aecc RP |
2334 | *retlen = chip->ops.retlen; |
2335 | ||
f75e5097 | 2336 | nand_release_device(mtd); |
8593fbc6 | 2337 | |
8593fbc6 | 2338 | return ret; |
f75e5097 | 2339 | } |
7314e9e7 | 2340 | |
1da177e4 | 2341 | /** |
8593fbc6 | 2342 | * nand_do_write_oob - [MTD Interface] NAND write out-of-band |
8b6e50c9 BN |
2343 | * @mtd: MTD device structure |
2344 | * @to: offset to write to | |
2345 | * @ops: oob operation description structure | |
1da177e4 | 2346 | * |
8b6e50c9 | 2347 | * NAND write out-of-band. |
1da177e4 | 2348 | */ |
8593fbc6 TG |
2349 | static int nand_do_write_oob(struct mtd_info *mtd, loff_t to, |
2350 | struct mtd_oob_ops *ops) | |
1da177e4 | 2351 | { |
03736155 | 2352 | int chipnr, page, status, len; |
ace4dfee | 2353 | struct nand_chip *chip = mtd->priv; |
1da177e4 | 2354 | |
20d8e248 | 2355 | DEBUG(MTD_DEBUG_LEVEL3, "%s: to = 0x%08x, len = %i\n", |
2356 | __func__, (unsigned int)to, (int)ops->ooblen); | |
1da177e4 | 2357 | |
03736155 AH |
2358 | if (ops->mode == MTD_OOB_AUTO) |
2359 | len = chip->ecc.layout->oobavail; | |
2360 | else | |
2361 | len = mtd->oobsize; | |
2362 | ||
1da177e4 | 2363 | /* Do not allow write past end of page */ |
03736155 | 2364 | if ((ops->ooboffs + ops->ooblen) > len) { |
20d8e248 | 2365 | DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt to write " |
2366 | "past end of page\n", __func__); | |
1da177e4 LT |
2367 | return -EINVAL; |
2368 | } | |
2369 | ||
03736155 | 2370 | if (unlikely(ops->ooboffs >= len)) { |
20d8e248 | 2371 | DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt to start " |
2372 | "write outside oob\n", __func__); | |
03736155 AH |
2373 | return -EINVAL; |
2374 | } | |
2375 | ||
775adc3d | 2376 | /* Do not allow write past end of device */ |
03736155 AH |
2377 | if (unlikely(to >= mtd->size || |
2378 | ops->ooboffs + ops->ooblen > | |
2379 | ((mtd->size >> chip->page_shift) - | |
2380 | (to >> chip->page_shift)) * len)) { | |
20d8e248 | 2381 | DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt write beyond " |
2382 | "end of device\n", __func__); | |
03736155 AH |
2383 | return -EINVAL; |
2384 | } | |
2385 | ||
7314e9e7 | 2386 | chipnr = (int)(to >> chip->chip_shift); |
ace4dfee | 2387 | chip->select_chip(mtd, chipnr); |
1da177e4 | 2388 | |
7314e9e7 TG |
2389 | /* Shift to get page */ |
2390 | page = (int)(to >> chip->page_shift); | |
2391 | ||
2392 | /* | |
2393 | * Reset the chip. Some chips (like the Toshiba TC5832DC found in one | |
2394 | * of my DiskOnChip 2000 test units) will clear the whole data page too | |
2395 | * if we don't do this. I have no clue why, but I seem to have 'fixed' | |
2396 | * it in the doc2000 driver in August 1999. dwmw2. | |
2397 | */ | |
ace4dfee | 2398 | chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1); |
1da177e4 LT |
2399 | |
2400 | /* Check, if it is write protected */ | |
2401 | if (nand_check_wp(mtd)) | |
8593fbc6 | 2402 | return -EROFS; |
61b03bd7 | 2403 | |
1da177e4 | 2404 | /* Invalidate the page cache, if we write to the cached page */ |
ace4dfee TG |
2405 | if (page == chip->pagebuf) |
2406 | chip->pagebuf = -1; | |
1da177e4 | 2407 | |
f722013e | 2408 | nand_fill_oob(mtd, ops->oobbuf, ops->ooblen, ops); |
7bc3312b | 2409 | status = chip->ecc.write_oob(mtd, chip, page & chip->pagemask); |
1da177e4 | 2410 | |
7bc3312b TG |
2411 | if (status) |
2412 | return status; | |
1da177e4 | 2413 | |
7014568b | 2414 | ops->oobretlen = ops->ooblen; |
1da177e4 | 2415 | |
7bc3312b | 2416 | return 0; |
8593fbc6 TG |
2417 | } |
2418 | ||
2419 | /** | |
2420 | * nand_write_oob - [MTD Interface] NAND write data and/or out-of-band | |
8b6e50c9 BN |
2421 | * @mtd: MTD device structure |
2422 | * @to: offset to write to | |
2423 | * @ops: oob operation description structure | |
8593fbc6 TG |
2424 | */ |
2425 | static int nand_write_oob(struct mtd_info *mtd, loff_t to, | |
2426 | struct mtd_oob_ops *ops) | |
2427 | { | |
8593fbc6 TG |
2428 | struct nand_chip *chip = mtd->priv; |
2429 | int ret = -ENOTSUPP; | |
2430 | ||
2431 | ops->retlen = 0; | |
2432 | ||
2433 | /* Do not allow writes past end of device */ | |
7014568b | 2434 | if (ops->datbuf && (to + ops->len) > mtd->size) { |
20d8e248 | 2435 | DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt write beyond " |
2436 | "end of device\n", __func__); | |
8593fbc6 TG |
2437 | return -EINVAL; |
2438 | } | |
2439 | ||
7bc3312b | 2440 | nand_get_device(chip, mtd, FL_WRITING); |
8593fbc6 | 2441 | |
f8ac0414 | 2442 | switch (ops->mode) { |
8593fbc6 TG |
2443 | case MTD_OOB_PLACE: |
2444 | case MTD_OOB_AUTO: | |
8593fbc6 | 2445 | case MTD_OOB_RAW: |
8593fbc6 TG |
2446 | break; |
2447 | ||
2448 | default: | |
2449 | goto out; | |
2450 | } | |
2451 | ||
2452 | if (!ops->datbuf) | |
2453 | ret = nand_do_write_oob(mtd, to, ops); | |
2454 | else | |
2455 | ret = nand_do_write_ops(mtd, to, ops); | |
2456 | ||
7351d3a5 | 2457 | out: |
1da177e4 | 2458 | nand_release_device(mtd); |
1da177e4 LT |
2459 | return ret; |
2460 | } | |
2461 | ||
1da177e4 | 2462 | /** |
7854d3f7 | 2463 | * single_erase_cmd - [GENERIC] NAND standard block erase command function |
8b6e50c9 BN |
2464 | * @mtd: MTD device structure |
2465 | * @page: the page address of the block which will be erased | |
1da177e4 | 2466 | * |
8b6e50c9 | 2467 | * Standard erase command for NAND chips. |
1da177e4 | 2468 | */ |
e0c7d767 | 2469 | static void single_erase_cmd(struct mtd_info *mtd, int page) |
1da177e4 | 2470 | { |
ace4dfee | 2471 | struct nand_chip *chip = mtd->priv; |
1da177e4 | 2472 | /* Send commands to erase a block */ |
ace4dfee TG |
2473 | chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page); |
2474 | chip->cmdfunc(mtd, NAND_CMD_ERASE2, -1, -1); | |
1da177e4 LT |
2475 | } |
2476 | ||
2477 | /** | |
7854d3f7 | 2478 | * multi_erase_cmd - [GENERIC] AND specific block erase command function |
8b6e50c9 BN |
2479 | * @mtd: MTD device structure |
2480 | * @page: the page address of the block which will be erased | |
1da177e4 | 2481 | * |
8b6e50c9 | 2482 | * AND multi block erase command function. Erase 4 consecutive blocks. |
1da177e4 | 2483 | */ |
e0c7d767 | 2484 | static void multi_erase_cmd(struct mtd_info *mtd, int page) |
1da177e4 | 2485 | { |
ace4dfee | 2486 | struct nand_chip *chip = mtd->priv; |
1da177e4 | 2487 | /* Send commands to erase a block */ |
ace4dfee TG |
2488 | chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page++); |
2489 | chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page++); | |
2490 | chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page++); | |
2491 | chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page); | |
2492 | chip->cmdfunc(mtd, NAND_CMD_ERASE2, -1, -1); | |
1da177e4 LT |
2493 | } |
2494 | ||
2495 | /** | |
2496 | * nand_erase - [MTD Interface] erase block(s) | |
8b6e50c9 BN |
2497 | * @mtd: MTD device structure |
2498 | * @instr: erase instruction | |
1da177e4 | 2499 | * |
8b6e50c9 | 2500 | * Erase one ore more blocks. |
1da177e4 | 2501 | */ |
e0c7d767 | 2502 | static int nand_erase(struct mtd_info *mtd, struct erase_info *instr) |
1da177e4 | 2503 | { |
e0c7d767 | 2504 | return nand_erase_nand(mtd, instr, 0); |
1da177e4 | 2505 | } |
61b03bd7 | 2506 | |
30f464b7 | 2507 | #define BBT_PAGE_MASK 0xffffff3f |
1da177e4 | 2508 | /** |
7854d3f7 | 2509 | * nand_erase_nand - [INTERN] erase block(s) |
8b6e50c9 BN |
2510 | * @mtd: MTD device structure |
2511 | * @instr: erase instruction | |
2512 | * @allowbbt: allow erasing the bbt area | |
1da177e4 | 2513 | * |
8b6e50c9 | 2514 | * Erase one ore more blocks. |
1da177e4 | 2515 | */ |
ace4dfee TG |
2516 | int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr, |
2517 | int allowbbt) | |
1da177e4 | 2518 | { |
69423d99 | 2519 | int page, status, pages_per_block, ret, chipnr; |
ace4dfee | 2520 | struct nand_chip *chip = mtd->priv; |
f8ac0414 | 2521 | loff_t rewrite_bbt[NAND_MAX_CHIPS] = {0}; |
ace4dfee | 2522 | unsigned int bbt_masked_page = 0xffffffff; |
69423d99 | 2523 | loff_t len; |
1da177e4 | 2524 | |
20d8e248 | 2525 | DEBUG(MTD_DEBUG_LEVEL3, "%s: start = 0x%012llx, len = %llu\n", |
2526 | __func__, (unsigned long long)instr->addr, | |
2527 | (unsigned long long)instr->len); | |
1da177e4 | 2528 | |
6fe5a6ac | 2529 | if (check_offs_len(mtd, instr->addr, instr->len)) |
1da177e4 | 2530 | return -EINVAL; |
1da177e4 | 2531 | |
bb0eb217 | 2532 | instr->fail_addr = MTD_FAIL_ADDR_UNKNOWN; |
1da177e4 LT |
2533 | |
2534 | /* Grab the lock and see if the device is available */ | |
ace4dfee | 2535 | nand_get_device(chip, mtd, FL_ERASING); |
1da177e4 LT |
2536 | |
2537 | /* Shift to get first page */ | |
ace4dfee TG |
2538 | page = (int)(instr->addr >> chip->page_shift); |
2539 | chipnr = (int)(instr->addr >> chip->chip_shift); | |
1da177e4 LT |
2540 | |
2541 | /* Calculate pages in each block */ | |
ace4dfee | 2542 | pages_per_block = 1 << (chip->phys_erase_shift - chip->page_shift); |
1da177e4 LT |
2543 | |
2544 | /* Select the NAND device */ | |
ace4dfee | 2545 | chip->select_chip(mtd, chipnr); |
1da177e4 | 2546 | |
1da177e4 LT |
2547 | /* Check, if it is write protected */ |
2548 | if (nand_check_wp(mtd)) { | |
20d8e248 | 2549 | DEBUG(MTD_DEBUG_LEVEL0, "%s: Device is write protected!!!\n", |
2550 | __func__); | |
1da177e4 LT |
2551 | instr->state = MTD_ERASE_FAILED; |
2552 | goto erase_exit; | |
2553 | } | |
2554 | ||
ace4dfee TG |
2555 | /* |
2556 | * If BBT requires refresh, set the BBT page mask to see if the BBT | |
2557 | * should be rewritten. Otherwise the mask is set to 0xffffffff which | |
2558 | * can not be matched. This is also done when the bbt is actually | |
7854d3f7 | 2559 | * erased to avoid recursive updates. |
ace4dfee TG |
2560 | */ |
2561 | if (chip->options & BBT_AUTO_REFRESH && !allowbbt) | |
2562 | bbt_masked_page = chip->bbt_td->pages[chipnr] & BBT_PAGE_MASK; | |
30f464b7 | 2563 | |
1da177e4 LT |
2564 | /* Loop through the pages */ |
2565 | len = instr->len; | |
2566 | ||
2567 | instr->state = MTD_ERASING; | |
2568 | ||
2569 | while (len) { | |
8b6e50c9 | 2570 | /* Heck if we have a bad block, we do not erase bad blocks! */ |
ace4dfee TG |
2571 | if (nand_block_checkbad(mtd, ((loff_t) page) << |
2572 | chip->page_shift, 0, allowbbt)) { | |
20d8e248 | 2573 | printk(KERN_WARNING "%s: attempt to erase a bad block " |
2574 | "at page 0x%08x\n", __func__, page); | |
1da177e4 LT |
2575 | instr->state = MTD_ERASE_FAILED; |
2576 | goto erase_exit; | |
2577 | } | |
61b03bd7 | 2578 | |
ace4dfee TG |
2579 | /* |
2580 | * Invalidate the page cache, if we erase the block which | |
8b6e50c9 | 2581 | * contains the current cached page. |
ace4dfee TG |
2582 | */ |
2583 | if (page <= chip->pagebuf && chip->pagebuf < | |
2584 | (page + pages_per_block)) | |
2585 | chip->pagebuf = -1; | |
1da177e4 | 2586 | |
ace4dfee | 2587 | chip->erase_cmd(mtd, page & chip->pagemask); |
61b03bd7 | 2588 | |
7bc3312b | 2589 | status = chip->waitfunc(mtd, chip); |
1da177e4 | 2590 | |
ace4dfee TG |
2591 | /* |
2592 | * See if operation failed and additional status checks are | |
2593 | * available | |
2594 | */ | |
2595 | if ((status & NAND_STATUS_FAIL) && (chip->errstat)) | |
2596 | status = chip->errstat(mtd, chip, FL_ERASING, | |
2597 | status, page); | |
068e3c0a | 2598 | |
1da177e4 | 2599 | /* See if block erase succeeded */ |
a4ab4c5d | 2600 | if (status & NAND_STATUS_FAIL) { |
20d8e248 | 2601 | DEBUG(MTD_DEBUG_LEVEL0, "%s: Failed erase, " |
2602 | "page 0x%08x\n", __func__, page); | |
1da177e4 | 2603 | instr->state = MTD_ERASE_FAILED; |
69423d99 AH |
2604 | instr->fail_addr = |
2605 | ((loff_t)page << chip->page_shift); | |
1da177e4 LT |
2606 | goto erase_exit; |
2607 | } | |
30f464b7 | 2608 | |
ace4dfee TG |
2609 | /* |
2610 | * If BBT requires refresh, set the BBT rewrite flag to the | |
8b6e50c9 | 2611 | * page being erased. |
ace4dfee TG |
2612 | */ |
2613 | if (bbt_masked_page != 0xffffffff && | |
2614 | (page & BBT_PAGE_MASK) == bbt_masked_page) | |
69423d99 AH |
2615 | rewrite_bbt[chipnr] = |
2616 | ((loff_t)page << chip->page_shift); | |
61b03bd7 | 2617 | |
1da177e4 | 2618 | /* Increment page address and decrement length */ |
ace4dfee | 2619 | len -= (1 << chip->phys_erase_shift); |
1da177e4 LT |
2620 | page += pages_per_block; |
2621 | ||
2622 | /* Check, if we cross a chip boundary */ | |
ace4dfee | 2623 | if (len && !(page & chip->pagemask)) { |
1da177e4 | 2624 | chipnr++; |
ace4dfee TG |
2625 | chip->select_chip(mtd, -1); |
2626 | chip->select_chip(mtd, chipnr); | |
30f464b7 | 2627 | |
ace4dfee TG |
2628 | /* |
2629 | * If BBT requires refresh and BBT-PERCHIP, set the BBT | |
8b6e50c9 | 2630 | * page mask to see if this BBT should be rewritten. |
ace4dfee TG |
2631 | */ |
2632 | if (bbt_masked_page != 0xffffffff && | |
2633 | (chip->bbt_td->options & NAND_BBT_PERCHIP)) | |
2634 | bbt_masked_page = chip->bbt_td->pages[chipnr] & | |
2635 | BBT_PAGE_MASK; | |
1da177e4 LT |
2636 | } |
2637 | } | |
2638 | instr->state = MTD_ERASE_DONE; | |
2639 | ||
7351d3a5 | 2640 | erase_exit: |
1da177e4 LT |
2641 | |
2642 | ret = instr->state == MTD_ERASE_DONE ? 0 : -EIO; | |
1da177e4 LT |
2643 | |
2644 | /* Deselect and wake up anyone waiting on the device */ | |
2645 | nand_release_device(mtd); | |
2646 | ||
49defc01 DW |
2647 | /* Do call back function */ |
2648 | if (!ret) | |
2649 | mtd_erase_callback(instr); | |
2650 | ||
ace4dfee TG |
2651 | /* |
2652 | * If BBT requires refresh and erase was successful, rewrite any | |
8b6e50c9 | 2653 | * selected bad block tables. |
ace4dfee TG |
2654 | */ |
2655 | if (bbt_masked_page == 0xffffffff || ret) | |
2656 | return ret; | |
2657 | ||
2658 | for (chipnr = 0; chipnr < chip->numchips; chipnr++) { | |
2659 | if (!rewrite_bbt[chipnr]) | |
2660 | continue; | |
8b6e50c9 | 2661 | /* Update the BBT for chip */ |
20d8e248 | 2662 | DEBUG(MTD_DEBUG_LEVEL0, "%s: nand_update_bbt " |
2663 | "(%d:0x%0llx 0x%0x)\n", __func__, chipnr, | |
2664 | rewrite_bbt[chipnr], chip->bbt_td->pages[chipnr]); | |
ace4dfee | 2665 | nand_update_bbt(mtd, rewrite_bbt[chipnr]); |
30f464b7 DM |
2666 | } |
2667 | ||
1da177e4 LT |
2668 | /* Return more or less happy */ |
2669 | return ret; | |
2670 | } | |
2671 | ||
2672 | /** | |
2673 | * nand_sync - [MTD Interface] sync | |
8b6e50c9 | 2674 | * @mtd: MTD device structure |
1da177e4 | 2675 | * |
8b6e50c9 | 2676 | * Sync is actually a wait for chip ready function. |
1da177e4 | 2677 | */ |
e0c7d767 | 2678 | static void nand_sync(struct mtd_info *mtd) |
1da177e4 | 2679 | { |
ace4dfee | 2680 | struct nand_chip *chip = mtd->priv; |
1da177e4 | 2681 | |
20d8e248 | 2682 | DEBUG(MTD_DEBUG_LEVEL3, "%s: called\n", __func__); |
1da177e4 LT |
2683 | |
2684 | /* Grab the lock and see if the device is available */ | |
ace4dfee | 2685 | nand_get_device(chip, mtd, FL_SYNCING); |
1da177e4 | 2686 | /* Release it and go back */ |
e0c7d767 | 2687 | nand_release_device(mtd); |
1da177e4 LT |
2688 | } |
2689 | ||
1da177e4 | 2690 | /** |
ace4dfee | 2691 | * nand_block_isbad - [MTD Interface] Check if block at offset is bad |
8b6e50c9 BN |
2692 | * @mtd: MTD device structure |
2693 | * @offs: offset relative to mtd start | |
1da177e4 | 2694 | */ |
ace4dfee | 2695 | static int nand_block_isbad(struct mtd_info *mtd, loff_t offs) |
1da177e4 LT |
2696 | { |
2697 | /* Check for invalid offset */ | |
ace4dfee | 2698 | if (offs > mtd->size) |
1da177e4 | 2699 | return -EINVAL; |
61b03bd7 | 2700 | |
ace4dfee | 2701 | return nand_block_checkbad(mtd, offs, 1, 0); |
1da177e4 LT |
2702 | } |
2703 | ||
2704 | /** | |
ace4dfee | 2705 | * nand_block_markbad - [MTD Interface] Mark block at the given offset as bad |
8b6e50c9 BN |
2706 | * @mtd: MTD device structure |
2707 | * @ofs: offset relative to mtd start | |
1da177e4 | 2708 | */ |
e0c7d767 | 2709 | static int nand_block_markbad(struct mtd_info *mtd, loff_t ofs) |
1da177e4 | 2710 | { |
ace4dfee | 2711 | struct nand_chip *chip = mtd->priv; |
1da177e4 LT |
2712 | int ret; |
2713 | ||
f8ac0414 FF |
2714 | ret = nand_block_isbad(mtd, ofs); |
2715 | if (ret) { | |
8b6e50c9 | 2716 | /* If it was bad already, return success and do nothing */ |
1da177e4 LT |
2717 | if (ret > 0) |
2718 | return 0; | |
e0c7d767 DW |
2719 | return ret; |
2720 | } | |
1da177e4 | 2721 | |
ace4dfee | 2722 | return chip->block_markbad(mtd, ofs); |
1da177e4 LT |
2723 | } |
2724 | ||
962034f4 VW |
2725 | /** |
2726 | * nand_suspend - [MTD Interface] Suspend the NAND flash | |
8b6e50c9 | 2727 | * @mtd: MTD device structure |
962034f4 VW |
2728 | */ |
2729 | static int nand_suspend(struct mtd_info *mtd) | |
2730 | { | |
ace4dfee | 2731 | struct nand_chip *chip = mtd->priv; |
962034f4 | 2732 | |
ace4dfee | 2733 | return nand_get_device(chip, mtd, FL_PM_SUSPENDED); |
962034f4 VW |
2734 | } |
2735 | ||
2736 | /** | |
2737 | * nand_resume - [MTD Interface] Resume the NAND flash | |
8b6e50c9 | 2738 | * @mtd: MTD device structure |
962034f4 VW |
2739 | */ |
2740 | static void nand_resume(struct mtd_info *mtd) | |
2741 | { | |
ace4dfee | 2742 | struct nand_chip *chip = mtd->priv; |
962034f4 | 2743 | |
ace4dfee | 2744 | if (chip->state == FL_PM_SUSPENDED) |
962034f4 VW |
2745 | nand_release_device(mtd); |
2746 | else | |
20d8e248 | 2747 | printk(KERN_ERR "%s called for a chip which is not " |
2748 | "in suspended state\n", __func__); | |
962034f4 VW |
2749 | } |
2750 | ||
8b6e50c9 | 2751 | /* Set default functions */ |
ace4dfee | 2752 | static void nand_set_defaults(struct nand_chip *chip, int busw) |
7aa65bfd | 2753 | { |
1da177e4 | 2754 | /* check for proper chip_delay setup, set 20us if not */ |
ace4dfee TG |
2755 | if (!chip->chip_delay) |
2756 | chip->chip_delay = 20; | |
1da177e4 LT |
2757 | |
2758 | /* check, if a user supplied command function given */ | |
ace4dfee TG |
2759 | if (chip->cmdfunc == NULL) |
2760 | chip->cmdfunc = nand_command; | |
1da177e4 LT |
2761 | |
2762 | /* check, if a user supplied wait function given */ | |
ace4dfee TG |
2763 | if (chip->waitfunc == NULL) |
2764 | chip->waitfunc = nand_wait; | |
2765 | ||
2766 | if (!chip->select_chip) | |
2767 | chip->select_chip = nand_select_chip; | |
2768 | if (!chip->read_byte) | |
2769 | chip->read_byte = busw ? nand_read_byte16 : nand_read_byte; | |
2770 | if (!chip->read_word) | |
2771 | chip->read_word = nand_read_word; | |
2772 | if (!chip->block_bad) | |
2773 | chip->block_bad = nand_block_bad; | |
2774 | if (!chip->block_markbad) | |
2775 | chip->block_markbad = nand_default_block_markbad; | |
2776 | if (!chip->write_buf) | |
2777 | chip->write_buf = busw ? nand_write_buf16 : nand_write_buf; | |
2778 | if (!chip->read_buf) | |
2779 | chip->read_buf = busw ? nand_read_buf16 : nand_read_buf; | |
2780 | if (!chip->verify_buf) | |
2781 | chip->verify_buf = busw ? nand_verify_buf16 : nand_verify_buf; | |
2782 | if (!chip->scan_bbt) | |
2783 | chip->scan_bbt = nand_default_bbt; | |
f75e5097 TG |
2784 | |
2785 | if (!chip->controller) { | |
2786 | chip->controller = &chip->hwcontrol; | |
2787 | spin_lock_init(&chip->controller->lock); | |
2788 | init_waitqueue_head(&chip->controller->wq); | |
2789 | } | |
2790 | ||
7aa65bfd TG |
2791 | } |
2792 | ||
8b6e50c9 | 2793 | /* Sanitize ONFI strings so we can safely print them */ |
d1e1f4e4 FF |
2794 | static void sanitize_string(uint8_t *s, size_t len) |
2795 | { | |
2796 | ssize_t i; | |
2797 | ||
8b6e50c9 | 2798 | /* Null terminate */ |
d1e1f4e4 FF |
2799 | s[len - 1] = 0; |
2800 | ||
8b6e50c9 | 2801 | /* Remove non printable chars */ |
d1e1f4e4 FF |
2802 | for (i = 0; i < len - 1; i++) { |
2803 | if (s[i] < ' ' || s[i] > 127) | |
2804 | s[i] = '?'; | |
2805 | } | |
2806 | ||
8b6e50c9 | 2807 | /* Remove trailing spaces */ |
d1e1f4e4 FF |
2808 | strim(s); |
2809 | } | |
2810 | ||
2811 | static u16 onfi_crc16(u16 crc, u8 const *p, size_t len) | |
2812 | { | |
2813 | int i; | |
2814 | while (len--) { | |
2815 | crc ^= *p++ << 8; | |
2816 | for (i = 0; i < 8; i++) | |
2817 | crc = (crc << 1) ^ ((crc & 0x8000) ? 0x8005 : 0); | |
2818 | } | |
2819 | ||
2820 | return crc; | |
2821 | } | |
2822 | ||
6fb277ba | 2823 | /* |
8b6e50c9 | 2824 | * Check if the NAND chip is ONFI compliant, returns 1 if it is, 0 otherwise. |
6fb277ba FF |
2825 | */ |
2826 | static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip, | |
2827 | int busw) | |
2828 | { | |
2829 | struct nand_onfi_params *p = &chip->onfi_params; | |
2830 | int i; | |
2831 | int val; | |
2832 | ||
7854d3f7 | 2833 | /* Try ONFI for unknown chip or LP */ |
6fb277ba FF |
2834 | chip->cmdfunc(mtd, NAND_CMD_READID, 0x20, -1); |
2835 | if (chip->read_byte(mtd) != 'O' || chip->read_byte(mtd) != 'N' || | |
2836 | chip->read_byte(mtd) != 'F' || chip->read_byte(mtd) != 'I') | |
2837 | return 0; | |
2838 | ||
2839 | printk(KERN_INFO "ONFI flash detected\n"); | |
2840 | chip->cmdfunc(mtd, NAND_CMD_PARAM, 0, -1); | |
2841 | for (i = 0; i < 3; i++) { | |
2842 | chip->read_buf(mtd, (uint8_t *)p, sizeof(*p)); | |
2843 | if (onfi_crc16(ONFI_CRC_BASE, (uint8_t *)p, 254) == | |
2844 | le16_to_cpu(p->crc)) { | |
2845 | printk(KERN_INFO "ONFI param page %d valid\n", i); | |
2846 | break; | |
2847 | } | |
2848 | } | |
2849 | ||
2850 | if (i == 3) | |
2851 | return 0; | |
2852 | ||
8b6e50c9 | 2853 | /* Check version */ |
6fb277ba | 2854 | val = le16_to_cpu(p->revision); |
b7b1a29d BN |
2855 | if (val & (1 << 5)) |
2856 | chip->onfi_version = 23; | |
2857 | else if (val & (1 << 4)) | |
6fb277ba FF |
2858 | chip->onfi_version = 22; |
2859 | else if (val & (1 << 3)) | |
2860 | chip->onfi_version = 21; | |
2861 | else if (val & (1 << 2)) | |
2862 | chip->onfi_version = 20; | |
b7b1a29d | 2863 | else if (val & (1 << 1)) |
6fb277ba | 2864 | chip->onfi_version = 10; |
b7b1a29d BN |
2865 | else |
2866 | chip->onfi_version = 0; | |
2867 | ||
2868 | if (!chip->onfi_version) { | |
2869 | printk(KERN_INFO "%s: unsupported ONFI version: %d\n", | |
2870 | __func__, val); | |
2871 | return 0; | |
2872 | } | |
6fb277ba FF |
2873 | |
2874 | sanitize_string(p->manufacturer, sizeof(p->manufacturer)); | |
2875 | sanitize_string(p->model, sizeof(p->model)); | |
2876 | if (!mtd->name) | |
2877 | mtd->name = p->model; | |
2878 | mtd->writesize = le32_to_cpu(p->byte_per_page); | |
2879 | mtd->erasesize = le32_to_cpu(p->pages_per_block) * mtd->writesize; | |
2880 | mtd->oobsize = le16_to_cpu(p->spare_bytes_per_page); | |
4ccb3b44 | 2881 | chip->chipsize = (uint64_t)le32_to_cpu(p->blocks_per_lun) * mtd->erasesize; |
6fb277ba FF |
2882 | busw = 0; |
2883 | if (le16_to_cpu(p->features) & 1) | |
2884 | busw = NAND_BUSWIDTH_16; | |
2885 | ||
2886 | chip->options &= ~NAND_CHIPOPTIONS_MSK; | |
2887 | chip->options |= (NAND_NO_READRDY | | |
2888 | NAND_NO_AUTOINCR) & NAND_CHIPOPTIONS_MSK; | |
2889 | ||
2890 | return 1; | |
2891 | } | |
2892 | ||
7aa65bfd | 2893 | /* |
8b6e50c9 | 2894 | * Get the flash and manufacturer id and lookup if the type is supported. |
7aa65bfd TG |
2895 | */ |
2896 | static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd, | |
ace4dfee | 2897 | struct nand_chip *chip, |
7351d3a5 FF |
2898 | int busw, |
2899 | int *maf_id, int *dev_id, | |
5e81e88a | 2900 | struct nand_flash_dev *type) |
7aa65bfd | 2901 | { |
d1e1f4e4 | 2902 | int i, maf_idx; |
426c457a | 2903 | u8 id_data[8]; |
6fb277ba | 2904 | int ret; |
1da177e4 LT |
2905 | |
2906 | /* Select the device */ | |
ace4dfee | 2907 | chip->select_chip(mtd, 0); |
1da177e4 | 2908 | |
ef89a880 KB |
2909 | /* |
2910 | * Reset the chip, required by some chips (e.g. Micron MT29FxGxxxxx) | |
8b6e50c9 | 2911 | * after power-up. |
ef89a880 KB |
2912 | */ |
2913 | chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1); | |
2914 | ||
1da177e4 | 2915 | /* Send the command for reading device ID */ |
ace4dfee | 2916 | chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1); |
1da177e4 LT |
2917 | |
2918 | /* Read manufacturer and device IDs */ | |
ace4dfee | 2919 | *maf_id = chip->read_byte(mtd); |
d1e1f4e4 | 2920 | *dev_id = chip->read_byte(mtd); |
1da177e4 | 2921 | |
8b6e50c9 BN |
2922 | /* |
2923 | * Try again to make sure, as some systems the bus-hold or other | |
ed8165c7 BD |
2924 | * interface concerns can cause random data which looks like a |
2925 | * possibly credible NAND flash to appear. If the two results do | |
2926 | * not match, ignore the device completely. | |
2927 | */ | |
2928 | ||
2929 | chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1); | |
2930 | ||
d1e1f4e4 | 2931 | for (i = 0; i < 2; i++) |
426c457a | 2932 | id_data[i] = chip->read_byte(mtd); |
ed8165c7 | 2933 | |
d1e1f4e4 | 2934 | if (id_data[0] != *maf_id || id_data[1] != *dev_id) { |
ed8165c7 BD |
2935 | printk(KERN_INFO "%s: second ID read did not match " |
2936 | "%02x,%02x against %02x,%02x\n", __func__, | |
d1e1f4e4 | 2937 | *maf_id, *dev_id, id_data[0], id_data[1]); |
ed8165c7 BD |
2938 | return ERR_PTR(-ENODEV); |
2939 | } | |
2940 | ||
7aa65bfd | 2941 | if (!type) |
5e81e88a DW |
2942 | type = nand_flash_ids; |
2943 | ||
2944 | for (; type->name != NULL; type++) | |
d1e1f4e4 | 2945 | if (*dev_id == type->id) |
f8ac0414 | 2946 | break; |
5e81e88a | 2947 | |
d1e1f4e4 FF |
2948 | chip->onfi_version = 0; |
2949 | if (!type->name || !type->pagesize) { | |
6fb277ba FF |
2950 | /* Check is chip is ONFI compliant */ |
2951 | ret = nand_flash_detect_onfi(mtd, chip, busw); | |
2952 | if (ret) | |
2953 | goto ident_done; | |
d1e1f4e4 FF |
2954 | } |
2955 | ||
2956 | chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1); | |
2957 | ||
2958 | /* Read entire ID string */ | |
2959 | ||
2960 | for (i = 0; i < 8; i++) | |
2961 | id_data[i] = chip->read_byte(mtd); | |
2962 | ||
5e81e88a | 2963 | if (!type->name) |
7aa65bfd TG |
2964 | return ERR_PTR(-ENODEV); |
2965 | ||
ba0251fe TG |
2966 | if (!mtd->name) |
2967 | mtd->name = type->name; | |
2968 | ||
69423d99 | 2969 | chip->chipsize = (uint64_t)type->chipsize << 20; |
7aa65bfd | 2970 | |
12a40a57 | 2971 | if (!type->pagesize && chip->init_size) { |
8b6e50c9 | 2972 | /* Set the pagesize, oobsize, erasesize by the driver */ |
12a40a57 HS |
2973 | busw = chip->init_size(mtd, chip, id_data); |
2974 | } else if (!type->pagesize) { | |
7aa65bfd | 2975 | int extid; |
29072b96 | 2976 | /* The 3rd id byte holds MLC / multichip data */ |
426c457a | 2977 | chip->cellinfo = id_data[2]; |
7aa65bfd | 2978 | /* The 4th id byte is the important one */ |
426c457a | 2979 | extid = id_data[3]; |
61b03bd7 | 2980 | |
426c457a KC |
2981 | /* |
2982 | * Field definitions are in the following datasheets: | |
2983 | * Old style (4,5 byte ID): Samsung K9GAG08U0M (p.32) | |
34c5bf6c | 2984 | * New style (6 byte ID): Samsung K9GBG08U0M (p.40) |
426c457a KC |
2985 | * |
2986 | * Check for wraparound + Samsung ID + nonzero 6th byte | |
2987 | * to decide what to do. | |
2988 | */ | |
2989 | if (id_data[0] == id_data[6] && id_data[1] == id_data[7] && | |
2990 | id_data[0] == NAND_MFR_SAMSUNG && | |
cfe3fdad | 2991 | (chip->cellinfo & NAND_CI_CELLTYPE_MSK) && |
426c457a KC |
2992 | id_data[5] != 0x00) { |
2993 | /* Calc pagesize */ | |
2994 | mtd->writesize = 2048 << (extid & 0x03); | |
2995 | extid >>= 2; | |
2996 | /* Calc oobsize */ | |
34c5bf6c BN |
2997 | switch (extid & 0x03) { |
2998 | case 1: | |
2999 | mtd->oobsize = 128; | |
3000 | break; | |
3001 | case 2: | |
3002 | mtd->oobsize = 218; | |
3003 | break; | |
3004 | case 3: | |
3005 | mtd->oobsize = 400; | |
3006 | break; | |
3007 | default: | |
3008 | mtd->oobsize = 436; | |
3009 | break; | |
3010 | } | |
426c457a KC |
3011 | extid >>= 2; |
3012 | /* Calc blocksize */ | |
3013 | mtd->erasesize = (128 * 1024) << | |
3014 | (((extid >> 1) & 0x04) | (extid & 0x03)); | |
3015 | busw = 0; | |
3016 | } else { | |
3017 | /* Calc pagesize */ | |
3018 | mtd->writesize = 1024 << (extid & 0x03); | |
3019 | extid >>= 2; | |
3020 | /* Calc oobsize */ | |
3021 | mtd->oobsize = (8 << (extid & 0x01)) * | |
3022 | (mtd->writesize >> 9); | |
3023 | extid >>= 2; | |
3024 | /* Calc blocksize. Blocksize is multiples of 64KiB */ | |
3025 | mtd->erasesize = (64 * 1024) << (extid & 0x03); | |
3026 | extid >>= 2; | |
3027 | /* Get buswidth information */ | |
3028 | busw = (extid & 0x01) ? NAND_BUSWIDTH_16 : 0; | |
3029 | } | |
7aa65bfd TG |
3030 | } else { |
3031 | /* | |
8b6e50c9 | 3032 | * Old devices have chip data hardcoded in the device id table. |
7aa65bfd | 3033 | */ |
ba0251fe TG |
3034 | mtd->erasesize = type->erasesize; |
3035 | mtd->writesize = type->pagesize; | |
4cbb9b80 | 3036 | mtd->oobsize = mtd->writesize / 32; |
ba0251fe | 3037 | busw = type->options & NAND_BUSWIDTH_16; |
2173bae8 BN |
3038 | |
3039 | /* | |
3040 | * Check for Spansion/AMD ID + repeating 5th, 6th byte since | |
3041 | * some Spansion chips have erasesize that conflicts with size | |
8b6e50c9 | 3042 | * listed in nand_ids table. |
2173bae8 BN |
3043 | * Data sheet (5 byte ID): Spansion S30ML-P ORNAND (p.39) |
3044 | */ | |
3045 | if (*maf_id == NAND_MFR_AMD && id_data[4] != 0x00 && | |
3046 | id_data[5] == 0x00 && id_data[6] == 0x00 && | |
3047 | id_data[7] == 0x00 && mtd->writesize == 512) { | |
3048 | mtd->erasesize = 128 * 1024; | |
3049 | mtd->erasesize <<= ((id_data[3] & 0x03) << 1); | |
3050 | } | |
7aa65bfd | 3051 | } |
d1e1f4e4 FF |
3052 | /* Get chip options, preserve non chip based options */ |
3053 | chip->options &= ~NAND_CHIPOPTIONS_MSK; | |
3054 | chip->options |= type->options & NAND_CHIPOPTIONS_MSK; | |
3055 | ||
8b6e50c9 BN |
3056 | /* |
3057 | * Check if chip is not a Samsung device. Do not clear the | |
3058 | * options for chips which do not have an extended id. | |
d1e1f4e4 FF |
3059 | */ |
3060 | if (*maf_id != NAND_MFR_SAMSUNG && !type->pagesize) | |
3061 | chip->options &= ~NAND_SAMSUNG_LP_OPTIONS; | |
3062 | ident_done: | |
3063 | ||
3064 | /* | |
8b6e50c9 | 3065 | * Set chip as a default. Board drivers can override it, if necessary. |
d1e1f4e4 FF |
3066 | */ |
3067 | chip->options |= NAND_NO_AUTOINCR; | |
1da177e4 | 3068 | |
7aa65bfd | 3069 | /* Try to identify manufacturer */ |
9a909867 | 3070 | for (maf_idx = 0; nand_manuf_ids[maf_idx].id != 0x0; maf_idx++) { |
7aa65bfd TG |
3071 | if (nand_manuf_ids[maf_idx].id == *maf_id) |
3072 | break; | |
3073 | } | |
0ea4a755 | 3074 | |
7aa65bfd TG |
3075 | /* |
3076 | * Check, if buswidth is correct. Hardware drivers should set | |
8b6e50c9 | 3077 | * chip correct! |
7aa65bfd | 3078 | */ |
ace4dfee | 3079 | if (busw != (chip->options & NAND_BUSWIDTH_16)) { |
7aa65bfd TG |
3080 | printk(KERN_INFO "NAND device: Manufacturer ID:" |
3081 | " 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id, | |
d1e1f4e4 | 3082 | *dev_id, nand_manuf_ids[maf_idx].name, mtd->name); |
7aa65bfd | 3083 | printk(KERN_WARNING "NAND bus width %d instead %d bit\n", |
ace4dfee | 3084 | (chip->options & NAND_BUSWIDTH_16) ? 16 : 8, |
7aa65bfd TG |
3085 | busw ? 16 : 8); |
3086 | return ERR_PTR(-EINVAL); | |
3087 | } | |
61b03bd7 | 3088 | |
7aa65bfd | 3089 | /* Calculate the address shift from the page size */ |
ace4dfee | 3090 | chip->page_shift = ffs(mtd->writesize) - 1; |
8b6e50c9 | 3091 | /* Convert chipsize to number of pages per chip -1 */ |
ace4dfee | 3092 | chip->pagemask = (chip->chipsize >> chip->page_shift) - 1; |
61b03bd7 | 3093 | |
ace4dfee | 3094 | chip->bbt_erase_shift = chip->phys_erase_shift = |
7aa65bfd | 3095 | ffs(mtd->erasesize) - 1; |
69423d99 AH |
3096 | if (chip->chipsize & 0xffffffff) |
3097 | chip->chip_shift = ffs((unsigned)chip->chipsize) - 1; | |
7351d3a5 FF |
3098 | else { |
3099 | chip->chip_shift = ffs((unsigned)(chip->chipsize >> 32)); | |
3100 | chip->chip_shift += 32 - 1; | |
3101 | } | |
1da177e4 | 3102 | |
26d9be11 AB |
3103 | chip->badblockbits = 8; |
3104 | ||
7aa65bfd | 3105 | /* Set the bad block position */ |
065a1ed8 | 3106 | if (mtd->writesize > 512 || (busw & NAND_BUSWIDTH_16)) |
c7b28e25 | 3107 | chip->badblockpos = NAND_LARGE_BADBLOCK_POS; |
065a1ed8 BN |
3108 | else |
3109 | chip->badblockpos = NAND_SMALL_BADBLOCK_POS; | |
61b03bd7 | 3110 | |
b60b08b0 KC |
3111 | /* |
3112 | * Bad block marker is stored in the last page of each block | |
c7b28e25 BN |
3113 | * on Samsung and Hynix MLC devices; stored in first two pages |
3114 | * of each block on Micron devices with 2KiB pages and on | |
13ed7aed BN |
3115 | * SLC Samsung, Hynix, Toshiba and AMD/Spansion. All others scan |
3116 | * only the first page. | |
b60b08b0 KC |
3117 | */ |
3118 | if ((chip->cellinfo & NAND_CI_CELLTYPE_MSK) && | |
3119 | (*maf_id == NAND_MFR_SAMSUNG || | |
3120 | *maf_id == NAND_MFR_HYNIX)) | |
5fb1549d | 3121 | chip->bbt_options |= NAND_BBT_SCANLASTPAGE; |
c7b28e25 BN |
3122 | else if ((!(chip->cellinfo & NAND_CI_CELLTYPE_MSK) && |
3123 | (*maf_id == NAND_MFR_SAMSUNG || | |
3124 | *maf_id == NAND_MFR_HYNIX || | |
13ed7aed | 3125 | *maf_id == NAND_MFR_TOSHIBA || |
c7b28e25 BN |
3126 | *maf_id == NAND_MFR_AMD)) || |
3127 | (mtd->writesize == 2048 && | |
3128 | *maf_id == NAND_MFR_MICRON)) | |
5fb1549d | 3129 | chip->bbt_options |= NAND_BBT_SCAN2NDPAGE; |
c7b28e25 | 3130 | |
7aa65bfd | 3131 | /* Check for AND chips with 4 page planes */ |
ace4dfee TG |
3132 | if (chip->options & NAND_4PAGE_ARRAY) |
3133 | chip->erase_cmd = multi_erase_cmd; | |
7aa65bfd | 3134 | else |
ace4dfee | 3135 | chip->erase_cmd = single_erase_cmd; |
7aa65bfd | 3136 | |
8b6e50c9 | 3137 | /* Do not replace user supplied command function! */ |
ace4dfee TG |
3138 | if (mtd->writesize > 512 && chip->cmdfunc == nand_command) |
3139 | chip->cmdfunc = nand_command_lp; | |
7aa65bfd TG |
3140 | |
3141 | printk(KERN_INFO "NAND device: Manufacturer ID:" | |
d1e1f4e4 FF |
3142 | " 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id, *dev_id, |
3143 | nand_manuf_ids[maf_idx].name, | |
0b524fb9 | 3144 | chip->onfi_version ? chip->onfi_params.model : type->name); |
7aa65bfd TG |
3145 | |
3146 | return type; | |
3147 | } | |
3148 | ||
7aa65bfd | 3149 | /** |
3b85c321 | 3150 | * nand_scan_ident - [NAND Interface] Scan for the NAND device |
8b6e50c9 BN |
3151 | * @mtd: MTD device structure |
3152 | * @maxchips: number of chips to scan for | |
3153 | * @table: alternative NAND ID table | |
7aa65bfd | 3154 | * |
8b6e50c9 BN |
3155 | * This is the first phase of the normal nand_scan() function. It reads the |
3156 | * flash ID and sets up MTD fields accordingly. | |
7aa65bfd | 3157 | * |
3b85c321 | 3158 | * The mtd->owner field must be set to the module of the caller. |
7aa65bfd | 3159 | */ |
5e81e88a DW |
3160 | int nand_scan_ident(struct mtd_info *mtd, int maxchips, |
3161 | struct nand_flash_dev *table) | |
7aa65bfd | 3162 | { |
d1e1f4e4 | 3163 | int i, busw, nand_maf_id, nand_dev_id; |
ace4dfee | 3164 | struct nand_chip *chip = mtd->priv; |
7aa65bfd TG |
3165 | struct nand_flash_dev *type; |
3166 | ||
7aa65bfd | 3167 | /* Get buswidth to select the correct functions */ |
ace4dfee | 3168 | busw = chip->options & NAND_BUSWIDTH_16; |
7aa65bfd | 3169 | /* Set the default functions */ |
ace4dfee | 3170 | nand_set_defaults(chip, busw); |
7aa65bfd TG |
3171 | |
3172 | /* Read the flash type */ | |
7351d3a5 FF |
3173 | type = nand_get_flash_type(mtd, chip, busw, |
3174 | &nand_maf_id, &nand_dev_id, table); | |
7aa65bfd TG |
3175 | |
3176 | if (IS_ERR(type)) { | |
b1c6e6db BD |
3177 | if (!(chip->options & NAND_SCAN_SILENT_NODEV)) |
3178 | printk(KERN_WARNING "No NAND device found.\n"); | |
ace4dfee | 3179 | chip->select_chip(mtd, -1); |
7aa65bfd | 3180 | return PTR_ERR(type); |
1da177e4 LT |
3181 | } |
3182 | ||
7aa65bfd | 3183 | /* Check for a chip array */ |
e0c7d767 | 3184 | for (i = 1; i < maxchips; i++) { |
ace4dfee | 3185 | chip->select_chip(mtd, i); |
ef89a880 KB |
3186 | /* See comment in nand_get_flash_type for reset */ |
3187 | chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1); | |
1da177e4 | 3188 | /* Send the command for reading device ID */ |
ace4dfee | 3189 | chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1); |
1da177e4 | 3190 | /* Read manufacturer and device IDs */ |
ace4dfee | 3191 | if (nand_maf_id != chip->read_byte(mtd) || |
d1e1f4e4 | 3192 | nand_dev_id != chip->read_byte(mtd)) |
1da177e4 LT |
3193 | break; |
3194 | } | |
3195 | if (i > 1) | |
3196 | printk(KERN_INFO "%d NAND chips detected\n", i); | |
61b03bd7 | 3197 | |
1da177e4 | 3198 | /* Store the number of chips and calc total size for mtd */ |
ace4dfee TG |
3199 | chip->numchips = i; |
3200 | mtd->size = i * chip->chipsize; | |
7aa65bfd | 3201 | |
3b85c321 DW |
3202 | return 0; |
3203 | } | |
7351d3a5 | 3204 | EXPORT_SYMBOL(nand_scan_ident); |
3b85c321 DW |
3205 | |
3206 | ||
3207 | /** | |
3208 | * nand_scan_tail - [NAND Interface] Scan for the NAND device | |
8b6e50c9 | 3209 | * @mtd: MTD device structure |
3b85c321 | 3210 | * |
8b6e50c9 BN |
3211 | * This is the second phase of the normal nand_scan() function. It fills out |
3212 | * all the uninitialized function pointers with the defaults and scans for a | |
3213 | * bad block table if appropriate. | |
3b85c321 DW |
3214 | */ |
3215 | int nand_scan_tail(struct mtd_info *mtd) | |
3216 | { | |
3217 | int i; | |
3218 | struct nand_chip *chip = mtd->priv; | |
3219 | ||
4bf63fcb DW |
3220 | if (!(chip->options & NAND_OWN_BUFFERS)) |
3221 | chip->buffers = kmalloc(sizeof(*chip->buffers), GFP_KERNEL); | |
3222 | if (!chip->buffers) | |
3223 | return -ENOMEM; | |
3224 | ||
7dcdcbef | 3225 | /* Set the internal oob buffer location, just after the page data */ |
784f4d5e | 3226 | chip->oob_poi = chip->buffers->databuf + mtd->writesize; |
1da177e4 | 3227 | |
7aa65bfd | 3228 | /* |
8b6e50c9 | 3229 | * If no default placement scheme is given, select an appropriate one. |
7aa65bfd | 3230 | */ |
193bd400 | 3231 | if (!chip->ecc.layout && (chip->ecc.mode != NAND_ECC_SOFT_BCH)) { |
61b03bd7 | 3232 | switch (mtd->oobsize) { |
1da177e4 | 3233 | case 8: |
5bd34c09 | 3234 | chip->ecc.layout = &nand_oob_8; |
1da177e4 LT |
3235 | break; |
3236 | case 16: | |
5bd34c09 | 3237 | chip->ecc.layout = &nand_oob_16; |
1da177e4 LT |
3238 | break; |
3239 | case 64: | |
5bd34c09 | 3240 | chip->ecc.layout = &nand_oob_64; |
1da177e4 | 3241 | break; |
81ec5364 TG |
3242 | case 128: |
3243 | chip->ecc.layout = &nand_oob_128; | |
3244 | break; | |
1da177e4 | 3245 | default: |
7aa65bfd TG |
3246 | printk(KERN_WARNING "No oob scheme defined for " |
3247 | "oobsize %d\n", mtd->oobsize); | |
1da177e4 LT |
3248 | BUG(); |
3249 | } | |
3250 | } | |
61b03bd7 | 3251 | |
956e944c DW |
3252 | if (!chip->write_page) |
3253 | chip->write_page = nand_write_page; | |
3254 | ||
61b03bd7 | 3255 | /* |
8b6e50c9 | 3256 | * Check ECC mode, default to software if 3byte/512byte hardware ECC is |
7aa65bfd | 3257 | * selected and we have 256 byte pagesize fallback to software ECC |
e0c7d767 | 3258 | */ |
956e944c | 3259 | |
ace4dfee | 3260 | switch (chip->ecc.mode) { |
6e0cb135 SN |
3261 | case NAND_ECC_HW_OOB_FIRST: |
3262 | /* Similar to NAND_ECC_HW, but a separate read_page handle */ | |
3263 | if (!chip->ecc.calculate || !chip->ecc.correct || | |
3264 | !chip->ecc.hwctl) { | |
3265 | printk(KERN_WARNING "No ECC functions supplied; " | |
3266 | "Hardware ECC not possible\n"); | |
3267 | BUG(); | |
3268 | } | |
3269 | if (!chip->ecc.read_page) | |
3270 | chip->ecc.read_page = nand_read_page_hwecc_oob_first; | |
3271 | ||
6dfc6d25 | 3272 | case NAND_ECC_HW: |
8b6e50c9 | 3273 | /* Use standard hwecc read page function? */ |
f5bbdacc TG |
3274 | if (!chip->ecc.read_page) |
3275 | chip->ecc.read_page = nand_read_page_hwecc; | |
f75e5097 TG |
3276 | if (!chip->ecc.write_page) |
3277 | chip->ecc.write_page = nand_write_page_hwecc; | |
52ff49df DB |
3278 | if (!chip->ecc.read_page_raw) |
3279 | chip->ecc.read_page_raw = nand_read_page_raw; | |
3280 | if (!chip->ecc.write_page_raw) | |
3281 | chip->ecc.write_page_raw = nand_write_page_raw; | |
7bc3312b TG |
3282 | if (!chip->ecc.read_oob) |
3283 | chip->ecc.read_oob = nand_read_oob_std; | |
3284 | if (!chip->ecc.write_oob) | |
3285 | chip->ecc.write_oob = nand_write_oob_std; | |
f5bbdacc | 3286 | |
6dfc6d25 | 3287 | case NAND_ECC_HW_SYNDROME: |
78b65179 SW |
3288 | if ((!chip->ecc.calculate || !chip->ecc.correct || |
3289 | !chip->ecc.hwctl) && | |
3290 | (!chip->ecc.read_page || | |
1c45f604 | 3291 | chip->ecc.read_page == nand_read_page_hwecc || |
78b65179 | 3292 | !chip->ecc.write_page || |
1c45f604 | 3293 | chip->ecc.write_page == nand_write_page_hwecc)) { |
6e0cb135 | 3294 | printk(KERN_WARNING "No ECC functions supplied; " |
6dfc6d25 TG |
3295 | "Hardware ECC not possible\n"); |
3296 | BUG(); | |
3297 | } | |
8b6e50c9 | 3298 | /* Use standard syndrome read/write page function? */ |
f5bbdacc TG |
3299 | if (!chip->ecc.read_page) |
3300 | chip->ecc.read_page = nand_read_page_syndrome; | |
f75e5097 TG |
3301 | if (!chip->ecc.write_page) |
3302 | chip->ecc.write_page = nand_write_page_syndrome; | |
52ff49df DB |
3303 | if (!chip->ecc.read_page_raw) |
3304 | chip->ecc.read_page_raw = nand_read_page_raw_syndrome; | |
3305 | if (!chip->ecc.write_page_raw) | |
3306 | chip->ecc.write_page_raw = nand_write_page_raw_syndrome; | |
7bc3312b TG |
3307 | if (!chip->ecc.read_oob) |
3308 | chip->ecc.read_oob = nand_read_oob_syndrome; | |
3309 | if (!chip->ecc.write_oob) | |
3310 | chip->ecc.write_oob = nand_write_oob_syndrome; | |
f5bbdacc | 3311 | |
ace4dfee | 3312 | if (mtd->writesize >= chip->ecc.size) |
6dfc6d25 TG |
3313 | break; |
3314 | printk(KERN_WARNING "%d byte HW ECC not possible on " | |
3315 | "%d byte page size, fallback to SW ECC\n", | |
ace4dfee TG |
3316 | chip->ecc.size, mtd->writesize); |
3317 | chip->ecc.mode = NAND_ECC_SOFT; | |
61b03bd7 | 3318 | |
6dfc6d25 | 3319 | case NAND_ECC_SOFT: |
ace4dfee TG |
3320 | chip->ecc.calculate = nand_calculate_ecc; |
3321 | chip->ecc.correct = nand_correct_data; | |
f5bbdacc | 3322 | chip->ecc.read_page = nand_read_page_swecc; |
3d459559 | 3323 | chip->ecc.read_subpage = nand_read_subpage; |
f75e5097 | 3324 | chip->ecc.write_page = nand_write_page_swecc; |
52ff49df DB |
3325 | chip->ecc.read_page_raw = nand_read_page_raw; |
3326 | chip->ecc.write_page_raw = nand_write_page_raw; | |
7bc3312b TG |
3327 | chip->ecc.read_oob = nand_read_oob_std; |
3328 | chip->ecc.write_oob = nand_write_oob_std; | |
9a73290d SV |
3329 | if (!chip->ecc.size) |
3330 | chip->ecc.size = 256; | |
ace4dfee | 3331 | chip->ecc.bytes = 3; |
1da177e4 | 3332 | break; |
61b03bd7 | 3333 | |
193bd400 ID |
3334 | case NAND_ECC_SOFT_BCH: |
3335 | if (!mtd_nand_has_bch()) { | |
3336 | printk(KERN_WARNING "CONFIG_MTD_ECC_BCH not enabled\n"); | |
3337 | BUG(); | |
3338 | } | |
3339 | chip->ecc.calculate = nand_bch_calculate_ecc; | |
3340 | chip->ecc.correct = nand_bch_correct_data; | |
3341 | chip->ecc.read_page = nand_read_page_swecc; | |
3342 | chip->ecc.read_subpage = nand_read_subpage; | |
3343 | chip->ecc.write_page = nand_write_page_swecc; | |
3344 | chip->ecc.read_page_raw = nand_read_page_raw; | |
3345 | chip->ecc.write_page_raw = nand_write_page_raw; | |
3346 | chip->ecc.read_oob = nand_read_oob_std; | |
3347 | chip->ecc.write_oob = nand_write_oob_std; | |
3348 | /* | |
3349 | * Board driver should supply ecc.size and ecc.bytes values to | |
3350 | * select how many bits are correctable; see nand_bch_init() | |
8b6e50c9 BN |
3351 | * for details. Otherwise, default to 4 bits for large page |
3352 | * devices. | |
193bd400 ID |
3353 | */ |
3354 | if (!chip->ecc.size && (mtd->oobsize >= 64)) { | |
3355 | chip->ecc.size = 512; | |
3356 | chip->ecc.bytes = 7; | |
3357 | } | |
3358 | chip->ecc.priv = nand_bch_init(mtd, | |
3359 | chip->ecc.size, | |
3360 | chip->ecc.bytes, | |
3361 | &chip->ecc.layout); | |
3362 | if (!chip->ecc.priv) { | |
3363 | printk(KERN_WARNING "BCH ECC initialization failed!\n"); | |
3364 | BUG(); | |
3365 | } | |
3366 | break; | |
3367 | ||
61b03bd7 | 3368 | case NAND_ECC_NONE: |
7aa65bfd TG |
3369 | printk(KERN_WARNING "NAND_ECC_NONE selected by board driver. " |
3370 | "This is not recommended !!\n"); | |
8593fbc6 TG |
3371 | chip->ecc.read_page = nand_read_page_raw; |
3372 | chip->ecc.write_page = nand_write_page_raw; | |
7bc3312b | 3373 | chip->ecc.read_oob = nand_read_oob_std; |
52ff49df DB |
3374 | chip->ecc.read_page_raw = nand_read_page_raw; |
3375 | chip->ecc.write_page_raw = nand_write_page_raw; | |
7bc3312b | 3376 | chip->ecc.write_oob = nand_write_oob_std; |
ace4dfee TG |
3377 | chip->ecc.size = mtd->writesize; |
3378 | chip->ecc.bytes = 0; | |
1da177e4 | 3379 | break; |
956e944c | 3380 | |
1da177e4 | 3381 | default: |
7aa65bfd | 3382 | printk(KERN_WARNING "Invalid NAND_ECC_MODE %d\n", |
ace4dfee | 3383 | chip->ecc.mode); |
61b03bd7 | 3384 | BUG(); |
1da177e4 | 3385 | } |
61b03bd7 | 3386 | |
5bd34c09 TG |
3387 | /* |
3388 | * The number of bytes available for a client to place data into | |
8b6e50c9 | 3389 | * the out of band area. |
5bd34c09 TG |
3390 | */ |
3391 | chip->ecc.layout->oobavail = 0; | |
81d19b04 DB |
3392 | for (i = 0; chip->ecc.layout->oobfree[i].length |
3393 | && i < ARRAY_SIZE(chip->ecc.layout->oobfree); i++) | |
5bd34c09 TG |
3394 | chip->ecc.layout->oobavail += |
3395 | chip->ecc.layout->oobfree[i].length; | |
1f92267c | 3396 | mtd->oobavail = chip->ecc.layout->oobavail; |
5bd34c09 | 3397 | |
7aa65bfd TG |
3398 | /* |
3399 | * Set the number of read / write steps for one page depending on ECC | |
8b6e50c9 | 3400 | * mode. |
7aa65bfd | 3401 | */ |
ace4dfee | 3402 | chip->ecc.steps = mtd->writesize / chip->ecc.size; |
f8ac0414 | 3403 | if (chip->ecc.steps * chip->ecc.size != mtd->writesize) { |
7854d3f7 | 3404 | printk(KERN_WARNING "Invalid ECC parameters\n"); |
6dfc6d25 | 3405 | BUG(); |
1da177e4 | 3406 | } |
f5bbdacc | 3407 | chip->ecc.total = chip->ecc.steps * chip->ecc.bytes; |
61b03bd7 | 3408 | |
8b6e50c9 | 3409 | /* Allow subpage writes up to ecc.steps. Not possible for MLC flash */ |
29072b96 TG |
3410 | if (!(chip->options & NAND_NO_SUBPAGE_WRITE) && |
3411 | !(chip->cellinfo & NAND_CI_CELLTYPE_MSK)) { | |
f8ac0414 | 3412 | switch (chip->ecc.steps) { |
29072b96 TG |
3413 | case 2: |
3414 | mtd->subpage_sft = 1; | |
3415 | break; | |
3416 | case 4: | |
3417 | case 8: | |
81ec5364 | 3418 | case 16: |
29072b96 TG |
3419 | mtd->subpage_sft = 2; |
3420 | break; | |
3421 | } | |
3422 | } | |
3423 | chip->subpagesize = mtd->writesize >> mtd->subpage_sft; | |
3424 | ||
04bbd0ea | 3425 | /* Initialize state */ |
ace4dfee | 3426 | chip->state = FL_READY; |
1da177e4 LT |
3427 | |
3428 | /* De-select the device */ | |
ace4dfee | 3429 | chip->select_chip(mtd, -1); |
1da177e4 LT |
3430 | |
3431 | /* Invalidate the pagebuffer reference */ | |
ace4dfee | 3432 | chip->pagebuf = -1; |
1da177e4 LT |
3433 | |
3434 | /* Fill in remaining MTD driver data */ | |
3435 | mtd->type = MTD_NANDFLASH; | |
93edbad6 ML |
3436 | mtd->flags = (chip->options & NAND_ROM) ? MTD_CAP_ROM : |
3437 | MTD_CAP_NANDFLASH; | |
1da177e4 LT |
3438 | mtd->erase = nand_erase; |
3439 | mtd->point = NULL; | |
3440 | mtd->unpoint = NULL; | |
3441 | mtd->read = nand_read; | |
3442 | mtd->write = nand_write; | |
2af7c653 | 3443 | mtd->panic_write = panic_nand_write; |
1da177e4 LT |
3444 | mtd->read_oob = nand_read_oob; |
3445 | mtd->write_oob = nand_write_oob; | |
1da177e4 LT |
3446 | mtd->sync = nand_sync; |
3447 | mtd->lock = NULL; | |
3448 | mtd->unlock = NULL; | |
962034f4 VW |
3449 | mtd->suspend = nand_suspend; |
3450 | mtd->resume = nand_resume; | |
1da177e4 LT |
3451 | mtd->block_isbad = nand_block_isbad; |
3452 | mtd->block_markbad = nand_block_markbad; | |
cbcab65a | 3453 | mtd->writebufsize = mtd->writesize; |
1da177e4 | 3454 | |
5bd34c09 TG |
3455 | /* propagate ecc.layout to mtd_info */ |
3456 | mtd->ecclayout = chip->ecc.layout; | |
1da177e4 | 3457 | |
0040bf38 | 3458 | /* Check, if we should skip the bad block table scan */ |
ace4dfee | 3459 | if (chip->options & NAND_SKIP_BBTSCAN) |
0040bf38 | 3460 | return 0; |
1da177e4 LT |
3461 | |
3462 | /* Build bad block table */ | |
ace4dfee | 3463 | return chip->scan_bbt(mtd); |
1da177e4 | 3464 | } |
7351d3a5 | 3465 | EXPORT_SYMBOL(nand_scan_tail); |
1da177e4 | 3466 | |
8b6e50c9 BN |
3467 | /* |
3468 | * is_module_text_address() isn't exported, and it's mostly a pointless | |
7351d3a5 | 3469 | * test if this is a module _anyway_ -- they'd have to try _really_ hard |
8b6e50c9 BN |
3470 | * to call us from in-kernel code if the core NAND support is modular. |
3471 | */ | |
3b85c321 DW |
3472 | #ifdef MODULE |
3473 | #define caller_is_module() (1) | |
3474 | #else | |
3475 | #define caller_is_module() \ | |
a6e6abd5 | 3476 | is_module_text_address((unsigned long)__builtin_return_address(0)) |
3b85c321 DW |
3477 | #endif |
3478 | ||
3479 | /** | |
3480 | * nand_scan - [NAND Interface] Scan for the NAND device | |
8b6e50c9 BN |
3481 | * @mtd: MTD device structure |
3482 | * @maxchips: number of chips to scan for | |
3b85c321 | 3483 | * |
8b6e50c9 BN |
3484 | * This fills out all the uninitialized function pointers with the defaults. |
3485 | * The flash ID is read and the mtd/chip structures are filled with the | |
3486 | * appropriate values. The mtd->owner field must be set to the module of the | |
3487 | * caller. | |
3b85c321 DW |
3488 | */ |
3489 | int nand_scan(struct mtd_info *mtd, int maxchips) | |
3490 | { | |
3491 | int ret; | |
3492 | ||
3493 | /* Many callers got this wrong, so check for it for a while... */ | |
3494 | if (!mtd->owner && caller_is_module()) { | |
20d8e248 | 3495 | printk(KERN_CRIT "%s called with NULL mtd->owner!\n", |
3496 | __func__); | |
3b85c321 DW |
3497 | BUG(); |
3498 | } | |
3499 | ||
5e81e88a | 3500 | ret = nand_scan_ident(mtd, maxchips, NULL); |
3b85c321 DW |
3501 | if (!ret) |
3502 | ret = nand_scan_tail(mtd); | |
3503 | return ret; | |
3504 | } | |
7351d3a5 | 3505 | EXPORT_SYMBOL(nand_scan); |
3b85c321 | 3506 | |
1da177e4 | 3507 | /** |
61b03bd7 | 3508 | * nand_release - [NAND Interface] Free resources held by the NAND device |
8b6e50c9 BN |
3509 | * @mtd: MTD device structure |
3510 | */ | |
e0c7d767 | 3511 | void nand_release(struct mtd_info *mtd) |
1da177e4 | 3512 | { |
ace4dfee | 3513 | struct nand_chip *chip = mtd->priv; |
1da177e4 | 3514 | |
193bd400 ID |
3515 | if (chip->ecc.mode == NAND_ECC_SOFT_BCH) |
3516 | nand_bch_free((struct nand_bch_control *)chip->ecc.priv); | |
3517 | ||
5ffcaf3d | 3518 | mtd_device_unregister(mtd); |
1da177e4 | 3519 | |
fa671646 | 3520 | /* Free bad block table memory */ |
ace4dfee | 3521 | kfree(chip->bbt); |
4bf63fcb DW |
3522 | if (!(chip->options & NAND_OWN_BUFFERS)) |
3523 | kfree(chip->buffers); | |
58373ff0 BN |
3524 | |
3525 | /* Free bad block descriptor memory */ | |
3526 | if (chip->badblock_pattern && chip->badblock_pattern->options | |
3527 | & NAND_BBT_DYNAMICSTRUCT) | |
3528 | kfree(chip->badblock_pattern); | |
1da177e4 | 3529 | } |
e0c7d767 | 3530 | EXPORT_SYMBOL_GPL(nand_release); |
8fe833c1 RP |
3531 | |
3532 | static int __init nand_base_init(void) | |
3533 | { | |
3534 | led_trigger_register_simple("nand-disk", &nand_led_trigger); | |
3535 | return 0; | |
3536 | } | |
3537 | ||
3538 | static void __exit nand_base_exit(void) | |
3539 | { | |
3540 | led_trigger_unregister_simple(nand_led_trigger); | |
3541 | } | |
3542 | ||
3543 | module_init(nand_base_init); | |
3544 | module_exit(nand_base_exit); | |
3545 | ||
e0c7d767 | 3546 | MODULE_LICENSE("GPL"); |
7351d3a5 FF |
3547 | MODULE_AUTHOR("Steven J. Hill <sjhill@realitydiluted.com>"); |
3548 | MODULE_AUTHOR("Thomas Gleixner <tglx@linutronix.de>"); | |
e0c7d767 | 3549 | MODULE_DESCRIPTION("Generic NAND flash driver code"); |