mtd: add Samsung SoC OneNAND driver
[deliverable/linux.git] / drivers / mtd / onenand / Kconfig
CommitLineData
ec98c681 1menuconfig MTD_ONENAND
cd5f6346
KP
2 tristate "OneNAND Device Support"
3 depends on MTD
0acfe530 4 select MTD_PARTITIONS
cd5f6346
KP
5 help
6 This enables support for accessing all type of OneNAND flash
7 devices. For further information see
c19df27e 8 <http://www.samsung.com/Products/Semiconductor/OneNAND/index.htm>
cd5f6346 9
ec98c681
JE
10if MTD_ONENAND
11
cd5f6346
KP
12config MTD_ONENAND_VERIFY_WRITE
13 bool "Verify OneNAND page writes"
cd5f6346
KP
14 help
15 This adds an extra check when data is written to the flash. The
16 OneNAND flash device internally checks only bits transitioning
17 from 1 to 0. There is a rare possibility that even though the
18 device thinks the write was successful, a bit could have been
09509603 19 flipped accidentally due to device wear or something else.
cd5f6346 20
68ee4b1c 21config MTD_ONENAND_GENERIC
46d0d0fb 22 tristate "OneNAND Flash device via platform device driver"
68ee4b1c 23 help
46d0d0fb 24 Support for OneNAND flash via platform device driver.
68ee4b1c 25
36cd4fb5
AH
26config MTD_ONENAND_OMAP2
27 tristate "OneNAND on OMAP2/OMAP3 support"
28 depends on MTD_ONENAND && (ARCH_OMAP2 || ARCH_OMAP3)
29 help
30 Support for a OneNAND flash device connected to an OMAP2/OMAP3 CPU
31 via the GPMC memory controller.
32
46f3e88b
KP
33config MTD_ONENAND_SAMSUNG
34 tristate "OneNAND on Samsung SOC controller support"
35 depends on MTD_ONENAND && (ARCH_S3C64XX || ARCH_S5PC100 || ARCH_S5PV210)
36 help
37 Support for a OneNAND flash device connected to an Samsung SOC
38 S3C64XX/S5PC1XX controller.
39
493c6460
KP
40config MTD_ONENAND_OTP
41 bool "OneNAND OTP Support"
34a82443 42 select HAVE_MTD_OTP
493c6460
KP
43 help
44 One Block of the NAND Flash Array memory is reserved as
45 a One-Time Programmable Block memory area.
46 Also, 1st Block of NAND Flash Array can be used as OTP.
47
48 The OTP block can be read, programmed and locked using the same
49 operations as any other NAND Flash Array memory block.
50 OTP block cannot be erased.
51
52 OTP block is fully-guaranteed to be a valid block.
53
ee9745fc
KP
54config MTD_ONENAND_2X_PROGRAM
55 bool "OneNAND 2X program support"
56 help
57 The 2X Program is an extension of Program Operation.
58 Since the device is equipped with two DataRAMs, and two-plane NAND
59 Flash memory array, these two component enables simultaneous program
60 of 4KiB. Plane1 has only even blocks such as block0, block2, block4
61 while Plane2 has only odd blocks such as block1, block3, block5.
62 So MTD regards it as 4KiB page size and 256KiB block size
63
64 Now the following chips support it. (KFXXX16Q2M)
65 Demux: KFG2G16Q2M, KFH4G16Q2M, KFW8G16Q2M,
66 Mux: KFM2G16Q2M, KFN4G16Q2M,
67
68 And more recent chips
69
8dab169b
KP
70config MTD_ONENAND_SIM
71 tristate "OneNAND simulator support"
8dab169b
KP
72 help
73 The simulator may simulate various OneNAND flash chips for the
74 OneNAND MTD layer.
75
ec98c681 76endif # MTD_ONENAND
This page took 0.388016 seconds and 5 git commands to generate.