Commit | Line | Data |
---|---|---|
801c135c AB |
1 | /* |
2 | * Copyright (c) International Business Machines Corp., 2006 | |
3 | * Copyright (c) Nokia Corporation, 2006, 2007 | |
4 | * | |
5 | * This program is free software; you can redistribute it and/or modify | |
6 | * it under the terms of the GNU General Public License as published by | |
7 | * the Free Software Foundation; either version 2 of the License, or | |
8 | * (at your option) any later version. | |
9 | * | |
10 | * This program is distributed in the hope that it will be useful, | |
11 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
12 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See | |
13 | * the GNU General Public License for more details. | |
14 | * | |
15 | * You should have received a copy of the GNU General Public License | |
16 | * along with this program; if not, write to the Free Software | |
17 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
18 | * | |
19 | * Author: Artem Bityutskiy (Битюцкий Артём) | |
20 | */ | |
21 | ||
22 | /* | |
85c6e6e2 | 23 | * UBI input/output sub-system. |
801c135c | 24 | * |
85c6e6e2 AB |
25 | * This sub-system provides a uniform way to work with all kinds of the |
26 | * underlying MTD devices. It also implements handy functions for reading and | |
27 | * writing UBI headers. | |
801c135c AB |
28 | * |
29 | * We are trying to have a paranoid mindset and not to trust to what we read | |
85c6e6e2 AB |
30 | * from the flash media in order to be more secure and robust. So this |
31 | * sub-system validates every single header it reads from the flash media. | |
801c135c AB |
32 | * |
33 | * Some words about how the eraseblock headers are stored. | |
34 | * | |
35 | * The erase counter header is always stored at offset zero. By default, the | |
36 | * VID header is stored after the EC header at the closest aligned offset | |
37 | * (i.e. aligned to the minimum I/O unit size). Data starts next to the VID | |
38 | * header at the closest aligned offset. But this default layout may be | |
39 | * changed. For example, for different reasons (e.g., optimization) UBI may be | |
40 | * asked to put the VID header at further offset, and even at an unaligned | |
41 | * offset. Of course, if the offset of the VID header is unaligned, UBI adds | |
42 | * proper padding in front of it. Data offset may also be changed but it has to | |
43 | * be aligned. | |
44 | * | |
45 | * About minimal I/O units. In general, UBI assumes flash device model where | |
46 | * there is only one minimal I/O unit size. E.g., in case of NOR flash it is 1, | |
47 | * in case of NAND flash it is a NAND page, etc. This is reported by MTD in the | |
48 | * @ubi->mtd->writesize field. But as an exception, UBI admits of using another | |
49 | * (smaller) minimal I/O unit size for EC and VID headers to make it possible | |
50 | * to do different optimizations. | |
51 | * | |
52 | * This is extremely useful in case of NAND flashes which admit of several | |
53 | * write operations to one NAND page. In this case UBI can fit EC and VID | |
54 | * headers at one NAND page. Thus, UBI may use "sub-page" size as the minimal | |
55 | * I/O unit for the headers (the @ubi->hdrs_min_io_size field). But it still | |
56 | * reports NAND page size (@ubi->min_io_size) as a minimal I/O unit for the UBI | |
57 | * users. | |
58 | * | |
59 | * Example: some Samsung NANDs with 2KiB pages allow 4x 512-byte writes, so | |
60 | * although the minimal I/O unit is 2K, UBI uses 512 bytes for EC and VID | |
61 | * headers. | |
62 | * | |
63 | * Q: why not just to treat sub-page as a minimal I/O unit of this flash | |
64 | * device, e.g., make @ubi->min_io_size = 512 in the example above? | |
65 | * | |
66 | * A: because when writing a sub-page, MTD still writes a full 2K page but the | |
be436f62 SK |
67 | * bytes which are not relevant to the sub-page are 0xFF. So, basically, |
68 | * writing 4x512 sub-pages is 4 times slower than writing one 2KiB NAND page. | |
69 | * Thus, we prefer to use sub-pages only for EC and VID headers. | |
801c135c AB |
70 | * |
71 | * As it was noted above, the VID header may start at a non-aligned offset. | |
72 | * For example, in case of a 2KiB page NAND flash with a 512 bytes sub-page, | |
73 | * the VID header may reside at offset 1984 which is the last 64 bytes of the | |
74 | * last sub-page (EC header is always at offset zero). This causes some | |
75 | * difficulties when reading and writing VID headers. | |
76 | * | |
77 | * Suppose we have a 64-byte buffer and we read a VID header at it. We change | |
78 | * the data and want to write this VID header out. As we can only write in | |
79 | * 512-byte chunks, we have to allocate one more buffer and copy our VID header | |
80 | * to offset 448 of this buffer. | |
81 | * | |
85c6e6e2 AB |
82 | * The I/O sub-system does the following trick in order to avoid this extra |
83 | * copy. It always allocates a @ubi->vid_hdr_alsize bytes buffer for the VID | |
84 | * header and returns a pointer to offset @ubi->vid_hdr_shift of this buffer. | |
85 | * When the VID header is being written out, it shifts the VID header pointer | |
86 | * back and writes the whole sub-page. | |
801c135c AB |
87 | */ |
88 | ||
89 | #include <linux/crc32.h> | |
90 | #include <linux/err.h> | |
5a0e3ad6 | 91 | #include <linux/slab.h> |
801c135c AB |
92 | #include "ubi.h" |
93 | ||
8056eb4a AB |
94 | static int self_check_not_bad(const struct ubi_device *ubi, int pnum); |
95 | static int self_check_peb_ec_hdr(const struct ubi_device *ubi, int pnum); | |
96 | static int self_check_ec_hdr(const struct ubi_device *ubi, int pnum, | |
97 | const struct ubi_ec_hdr *ec_hdr); | |
98 | static int self_check_peb_vid_hdr(const struct ubi_device *ubi, int pnum); | |
99 | static int self_check_vid_hdr(const struct ubi_device *ubi, int pnum, | |
100 | const struct ubi_vid_hdr *vid_hdr); | |
97d6104b AB |
101 | static int self_check_write(struct ubi_device *ubi, const void *buf, int pnum, |
102 | int offset, int len); | |
801c135c AB |
103 | |
104 | /** | |
105 | * ubi_io_read - read data from a physical eraseblock. | |
106 | * @ubi: UBI device description object | |
107 | * @buf: buffer where to store the read data | |
108 | * @pnum: physical eraseblock number to read from | |
109 | * @offset: offset within the physical eraseblock from where to read | |
110 | * @len: how many bytes to read | |
111 | * | |
112 | * This function reads data from offset @offset of physical eraseblock @pnum | |
113 | * and stores the read data in the @buf buffer. The following return codes are | |
114 | * possible: | |
115 | * | |
116 | * o %0 if all the requested data were successfully read; | |
117 | * o %UBI_IO_BITFLIPS if all the requested data were successfully read, but | |
118 | * correctable bit-flips were detected; this is harmless but may indicate | |
119 | * that this eraseblock may become bad soon (but do not have to); | |
63b6c1ed AB |
120 | * o %-EBADMSG if the MTD subsystem reported about data integrity problems, for |
121 | * example it can be an ECC error in case of NAND; this most probably means | |
122 | * that the data is corrupted; | |
801c135c AB |
123 | * o %-EIO if some I/O error occurred; |
124 | * o other negative error codes in case of other errors. | |
125 | */ | |
126 | int ubi_io_read(const struct ubi_device *ubi, void *buf, int pnum, int offset, | |
127 | int len) | |
128 | { | |
129 | int err, retries = 0; | |
130 | size_t read; | |
131 | loff_t addr; | |
132 | ||
133 | dbg_io("read %d bytes from PEB %d:%d", len, pnum, offset); | |
134 | ||
135 | ubi_assert(pnum >= 0 && pnum < ubi->peb_count); | |
136 | ubi_assert(offset >= 0 && offset + len <= ubi->peb_size); | |
137 | ubi_assert(len > 0); | |
138 | ||
8056eb4a | 139 | err = self_check_not_bad(ubi, pnum); |
801c135c | 140 | if (err) |
adbf05e3 | 141 | return err; |
801c135c | 142 | |
276832d8 AB |
143 | /* |
144 | * Deliberately corrupt the buffer to improve robustness. Indeed, if we | |
145 | * do not do this, the following may happen: | |
146 | * 1. The buffer contains data from previous operation, e.g., read from | |
147 | * another PEB previously. The data looks like expected, e.g., if we | |
148 | * just do not read anything and return - the caller would not | |
149 | * notice this. E.g., if we are reading a VID header, the buffer may | |
150 | * contain a valid VID header from another PEB. | |
151 | * 2. The driver is buggy and returns us success or -EBADMSG or | |
152 | * -EUCLEAN, but it does not actually put any data to the buffer. | |
153 | * | |
154 | * This may confuse UBI or upper layers - they may think the buffer | |
155 | * contains valid data while in fact it is just old data. This is | |
156 | * especially possible because UBI (and UBIFS) relies on CRC, and | |
157 | * treats data as correct even in case of ECC errors if the CRC is | |
158 | * correct. | |
159 | * | |
160 | * Try to prevent this situation by changing the first byte of the | |
161 | * buffer. | |
162 | */ | |
163 | *((uint8_t *)buf) ^= 0xFF; | |
164 | ||
801c135c AB |
165 | addr = (loff_t)pnum * ubi->peb_size + offset; |
166 | retry: | |
329ad399 | 167 | err = mtd_read(ubi->mtd, addr, len, &read, buf); |
801c135c | 168 | if (err) { |
d57f4054 | 169 | const char *errstr = mtd_is_eccerr(err) ? " (ECC error)" : ""; |
1a49af2c | 170 | |
d57f4054 | 171 | if (mtd_is_bitflip(err)) { |
801c135c AB |
172 | /* |
173 | * -EUCLEAN is reported if there was a bit-flip which | |
174 | * was corrected, so this is harmless. | |
8c1e6ee1 AB |
175 | * |
176 | * We do not report about it here unless debugging is | |
177 | * enabled. A corresponding message will be printed | |
178 | * later, when it is has been scrubbed. | |
801c135c | 179 | */ |
32608703 TB |
180 | ubi_msg(ubi, "fixable bit-flip detected at PEB %d", |
181 | pnum); | |
801c135c AB |
182 | ubi_assert(len == read); |
183 | return UBI_IO_BITFLIPS; | |
184 | } | |
185 | ||
a87f29cb | 186 | if (retries++ < UBI_IO_RETRIES) { |
32608703 | 187 | ubi_warn(ubi, "error %d%s while reading %d bytes from PEB %d:%d, read only %zd bytes, retry", |
f01e2d16 | 188 | err, errstr, len, pnum, offset, read); |
801c135c AB |
189 | yield(); |
190 | goto retry; | |
191 | } | |
192 | ||
32608703 | 193 | ubi_err(ubi, "error %d%s while reading %d bytes from PEB %d:%d, read %zd bytes", |
049333ce | 194 | err, errstr, len, pnum, offset, read); |
25886a36 | 195 | dump_stack(); |
2362a53e AB |
196 | |
197 | /* | |
198 | * The driver should never return -EBADMSG if it failed to read | |
199 | * all the requested data. But some buggy drivers might do | |
200 | * this, so we change it to -EIO. | |
201 | */ | |
d57f4054 | 202 | if (read != len && mtd_is_eccerr(err)) { |
2362a53e AB |
203 | ubi_assert(0); |
204 | err = -EIO; | |
205 | } | |
801c135c AB |
206 | } else { |
207 | ubi_assert(len == read); | |
208 | ||
27a0f2a3 | 209 | if (ubi_dbg_is_bitflip(ubi)) { |
c8566350 | 210 | dbg_gen("bit-flip (emulated)"); |
801c135c AB |
211 | err = UBI_IO_BITFLIPS; |
212 | } | |
213 | } | |
214 | ||
215 | return err; | |
216 | } | |
217 | ||
218 | /** | |
219 | * ubi_io_write - write data to a physical eraseblock. | |
220 | * @ubi: UBI device description object | |
221 | * @buf: buffer with the data to write | |
222 | * @pnum: physical eraseblock number to write to | |
223 | * @offset: offset within the physical eraseblock where to write | |
224 | * @len: how many bytes to write | |
225 | * | |
226 | * This function writes @len bytes of data from buffer @buf to offset @offset | |
227 | * of physical eraseblock @pnum. If all the data were successfully written, | |
228 | * zero is returned. If an error occurred, this function returns a negative | |
229 | * error code. If %-EIO is returned, the physical eraseblock most probably went | |
230 | * bad. | |
231 | * | |
232 | * Note, in case of an error, it is possible that something was still written | |
233 | * to the flash media, but may be some garbage. | |
234 | */ | |
e88d6e10 AB |
235 | int ubi_io_write(struct ubi_device *ubi, const void *buf, int pnum, int offset, |
236 | int len) | |
801c135c AB |
237 | { |
238 | int err; | |
239 | size_t written; | |
240 | loff_t addr; | |
241 | ||
242 | dbg_io("write %d bytes to PEB %d:%d", len, pnum, offset); | |
243 | ||
244 | ubi_assert(pnum >= 0 && pnum < ubi->peb_count); | |
245 | ubi_assert(offset >= 0 && offset + len <= ubi->peb_size); | |
246 | ubi_assert(offset % ubi->hdrs_min_io_size == 0); | |
247 | ubi_assert(len > 0 && len % ubi->hdrs_min_io_size == 0); | |
248 | ||
249 | if (ubi->ro_mode) { | |
32608703 | 250 | ubi_err(ubi, "read-only mode"); |
801c135c AB |
251 | return -EROFS; |
252 | } | |
253 | ||
8056eb4a | 254 | err = self_check_not_bad(ubi, pnum); |
801c135c | 255 | if (err) |
adbf05e3 | 256 | return err; |
801c135c AB |
257 | |
258 | /* The area we are writing to has to contain all 0xFF bytes */ | |
97d6104b | 259 | err = ubi_self_check_all_ff(ubi, pnum, offset, len); |
801c135c | 260 | if (err) |
adbf05e3 | 261 | return err; |
801c135c AB |
262 | |
263 | if (offset >= ubi->leb_start) { | |
264 | /* | |
265 | * We write to the data area of the physical eraseblock. Make | |
266 | * sure it has valid EC and VID headers. | |
267 | */ | |
8056eb4a | 268 | err = self_check_peb_ec_hdr(ubi, pnum); |
801c135c | 269 | if (err) |
adbf05e3 | 270 | return err; |
8056eb4a | 271 | err = self_check_peb_vid_hdr(ubi, pnum); |
801c135c | 272 | if (err) |
adbf05e3 | 273 | return err; |
801c135c AB |
274 | } |
275 | ||
27a0f2a3 | 276 | if (ubi_dbg_is_write_failure(ubi)) { |
32608703 | 277 | ubi_err(ubi, "cannot write %d bytes to PEB %d:%d (emulated)", |
049333ce | 278 | len, pnum, offset); |
25886a36 | 279 | dump_stack(); |
801c135c AB |
280 | return -EIO; |
281 | } | |
282 | ||
283 | addr = (loff_t)pnum * ubi->peb_size + offset; | |
eda95cbf | 284 | err = mtd_write(ubi->mtd, addr, len, &written, buf); |
801c135c | 285 | if (err) { |
32608703 | 286 | ubi_err(ubi, "error %d while writing %d bytes to PEB %d:%d, written %zd bytes", |
049333ce | 287 | err, len, pnum, offset, written); |
25886a36 | 288 | dump_stack(); |
ef7088e7 | 289 | ubi_dump_flash(ubi, pnum, offset, len); |
801c135c AB |
290 | } else |
291 | ubi_assert(written == len); | |
292 | ||
6e9065d7 | 293 | if (!err) { |
97d6104b | 294 | err = self_check_write(ubi, buf, pnum, offset, len); |
6e9065d7 AB |
295 | if (err) |
296 | return err; | |
297 | ||
298 | /* | |
299 | * Since we always write sequentially, the rest of the PEB has | |
300 | * to contain only 0xFF bytes. | |
301 | */ | |
302 | offset += len; | |
303 | len = ubi->peb_size - offset; | |
304 | if (len) | |
97d6104b | 305 | err = ubi_self_check_all_ff(ubi, pnum, offset, len); |
6e9065d7 AB |
306 | } |
307 | ||
801c135c AB |
308 | return err; |
309 | } | |
310 | ||
311 | /** | |
312 | * erase_callback - MTD erasure call-back. | |
313 | * @ei: MTD erase information object. | |
314 | * | |
315 | * Note, even though MTD erase interface is asynchronous, all the current | |
316 | * implementations are synchronous anyway. | |
317 | */ | |
318 | static void erase_callback(struct erase_info *ei) | |
319 | { | |
320 | wake_up_interruptible((wait_queue_head_t *)ei->priv); | |
321 | } | |
322 | ||
323 | /** | |
324 | * do_sync_erase - synchronously erase a physical eraseblock. | |
325 | * @ubi: UBI device description object | |
326 | * @pnum: the physical eraseblock number to erase | |
327 | * | |
328 | * This function synchronously erases physical eraseblock @pnum and returns | |
329 | * zero in case of success and a negative error code in case of failure. If | |
330 | * %-EIO is returned, the physical eraseblock most probably went bad. | |
331 | */ | |
e88d6e10 | 332 | static int do_sync_erase(struct ubi_device *ubi, int pnum) |
801c135c AB |
333 | { |
334 | int err, retries = 0; | |
335 | struct erase_info ei; | |
336 | wait_queue_head_t wq; | |
337 | ||
338 | dbg_io("erase PEB %d", pnum); | |
3efe5090 AB |
339 | ubi_assert(pnum >= 0 && pnum < ubi->peb_count); |
340 | ||
341 | if (ubi->ro_mode) { | |
32608703 | 342 | ubi_err(ubi, "read-only mode"); |
3efe5090 AB |
343 | return -EROFS; |
344 | } | |
801c135c AB |
345 | |
346 | retry: | |
347 | init_waitqueue_head(&wq); | |
348 | memset(&ei, 0, sizeof(struct erase_info)); | |
349 | ||
350 | ei.mtd = ubi->mtd; | |
2f176f79 | 351 | ei.addr = (loff_t)pnum * ubi->peb_size; |
801c135c AB |
352 | ei.len = ubi->peb_size; |
353 | ei.callback = erase_callback; | |
354 | ei.priv = (unsigned long)&wq; | |
355 | ||
7e1f0dc0 | 356 | err = mtd_erase(ubi->mtd, &ei); |
801c135c AB |
357 | if (err) { |
358 | if (retries++ < UBI_IO_RETRIES) { | |
32608703 | 359 | ubi_warn(ubi, "error %d while erasing PEB %d, retry", |
f01e2d16 | 360 | err, pnum); |
801c135c AB |
361 | yield(); |
362 | goto retry; | |
363 | } | |
32608703 | 364 | ubi_err(ubi, "cannot erase PEB %d, error %d", pnum, err); |
25886a36 | 365 | dump_stack(); |
801c135c AB |
366 | return err; |
367 | } | |
368 | ||
369 | err = wait_event_interruptible(wq, ei.state == MTD_ERASE_DONE || | |
370 | ei.state == MTD_ERASE_FAILED); | |
371 | if (err) { | |
32608703 | 372 | ubi_err(ubi, "interrupted PEB %d erasure", pnum); |
801c135c AB |
373 | return -EINTR; |
374 | } | |
375 | ||
376 | if (ei.state == MTD_ERASE_FAILED) { | |
377 | if (retries++ < UBI_IO_RETRIES) { | |
32608703 TB |
378 | ubi_warn(ubi, "error while erasing PEB %d, retry", |
379 | pnum); | |
801c135c AB |
380 | yield(); |
381 | goto retry; | |
382 | } | |
32608703 | 383 | ubi_err(ubi, "cannot erase PEB %d", pnum); |
25886a36 | 384 | dump_stack(); |
801c135c AB |
385 | return -EIO; |
386 | } | |
387 | ||
97d6104b | 388 | err = ubi_self_check_all_ff(ubi, pnum, 0, ubi->peb_size); |
801c135c | 389 | if (err) |
adbf05e3 | 390 | return err; |
801c135c | 391 | |
27a0f2a3 | 392 | if (ubi_dbg_is_erase_failure(ubi)) { |
32608703 | 393 | ubi_err(ubi, "cannot erase PEB %d (emulated)", pnum); |
801c135c AB |
394 | return -EIO; |
395 | } | |
396 | ||
397 | return 0; | |
398 | } | |
399 | ||
801c135c AB |
400 | /* Patterns to write to a physical eraseblock when torturing it */ |
401 | static uint8_t patterns[] = {0xa5, 0x5a, 0x0}; | |
402 | ||
403 | /** | |
404 | * torture_peb - test a supposedly bad physical eraseblock. | |
405 | * @ubi: UBI device description object | |
406 | * @pnum: the physical eraseblock number to test | |
407 | * | |
408 | * This function returns %-EIO if the physical eraseblock did not pass the | |
409 | * test, a positive number of erase operations done if the test was | |
410 | * successfully passed, and other negative error codes in case of other errors. | |
411 | */ | |
e88d6e10 | 412 | static int torture_peb(struct ubi_device *ubi, int pnum) |
801c135c | 413 | { |
801c135c AB |
414 | int err, i, patt_count; |
415 | ||
32608703 | 416 | ubi_msg(ubi, "run torture test for PEB %d", pnum); |
801c135c AB |
417 | patt_count = ARRAY_SIZE(patterns); |
418 | ubi_assert(patt_count > 0); | |
419 | ||
e88d6e10 | 420 | mutex_lock(&ubi->buf_mutex); |
801c135c AB |
421 | for (i = 0; i < patt_count; i++) { |
422 | err = do_sync_erase(ubi, pnum); | |
423 | if (err) | |
424 | goto out; | |
425 | ||
426 | /* Make sure the PEB contains only 0xFF bytes */ | |
0ca39d74 | 427 | err = ubi_io_read(ubi, ubi->peb_buf, pnum, 0, ubi->peb_size); |
801c135c AB |
428 | if (err) |
429 | goto out; | |
430 | ||
0ca39d74 | 431 | err = ubi_check_pattern(ubi->peb_buf, 0xFF, ubi->peb_size); |
801c135c | 432 | if (err == 0) { |
32608703 | 433 | ubi_err(ubi, "erased PEB %d, but a non-0xFF byte found", |
801c135c AB |
434 | pnum); |
435 | err = -EIO; | |
436 | goto out; | |
437 | } | |
438 | ||
439 | /* Write a pattern and check it */ | |
0ca39d74 AB |
440 | memset(ubi->peb_buf, patterns[i], ubi->peb_size); |
441 | err = ubi_io_write(ubi, ubi->peb_buf, pnum, 0, ubi->peb_size); | |
801c135c AB |
442 | if (err) |
443 | goto out; | |
444 | ||
0ca39d74 AB |
445 | memset(ubi->peb_buf, ~patterns[i], ubi->peb_size); |
446 | err = ubi_io_read(ubi, ubi->peb_buf, pnum, 0, ubi->peb_size); | |
801c135c AB |
447 | if (err) |
448 | goto out; | |
449 | ||
0ca39d74 | 450 | err = ubi_check_pattern(ubi->peb_buf, patterns[i], |
bb00e180 | 451 | ubi->peb_size); |
801c135c | 452 | if (err == 0) { |
32608703 | 453 | ubi_err(ubi, "pattern %x checking failed for PEB %d", |
801c135c AB |
454 | patterns[i], pnum); |
455 | err = -EIO; | |
456 | goto out; | |
457 | } | |
458 | } | |
459 | ||
460 | err = patt_count; | |
32608703 | 461 | ubi_msg(ubi, "PEB %d passed torture test, do not mark it as bad", pnum); |
801c135c AB |
462 | |
463 | out: | |
e88d6e10 | 464 | mutex_unlock(&ubi->buf_mutex); |
d57f4054 | 465 | if (err == UBI_IO_BITFLIPS || mtd_is_eccerr(err)) { |
801c135c AB |
466 | /* |
467 | * If a bit-flip or data integrity error was detected, the test | |
468 | * has not passed because it happened on a freshly erased | |
469 | * physical eraseblock which means something is wrong with it. | |
470 | */ | |
32608703 | 471 | ubi_err(ubi, "read problems on freshly erased PEB %d, must be bad", |
8d2d4011 | 472 | pnum); |
801c135c | 473 | err = -EIO; |
8d2d4011 | 474 | } |
801c135c AB |
475 | return err; |
476 | } | |
477 | ||
ebf53f42 AB |
478 | /** |
479 | * nor_erase_prepare - prepare a NOR flash PEB for erasure. | |
480 | * @ubi: UBI device description object | |
481 | * @pnum: physical eraseblock number to prepare | |
482 | * | |
483 | * NOR flash, or at least some of them, have peculiar embedded PEB erasure | |
484 | * algorithm: the PEB is first filled with zeroes, then it is erased. And | |
485 | * filling with zeroes starts from the end of the PEB. This was observed with | |
486 | * Spansion S29GL512N NOR flash. | |
487 | * | |
488 | * This means that in case of a power cut we may end up with intact data at the | |
489 | * beginning of the PEB, and all zeroes at the end of PEB. In other words, the | |
490 | * EC and VID headers are OK, but a large chunk of data at the end of PEB is | |
491 | * zeroed. This makes UBI mistakenly treat this PEB as used and associate it | |
492 | * with an LEB, which leads to subsequent failures (e.g., UBIFS fails). | |
493 | * | |
494 | * This function is called before erasing NOR PEBs and it zeroes out EC and VID | |
495 | * magic numbers in order to invalidate them and prevent the failures. Returns | |
496 | * zero in case of success and a negative error code in case of failure. | |
497 | */ | |
498 | static int nor_erase_prepare(struct ubi_device *ubi, int pnum) | |
499 | { | |
2c7ca5cc | 500 | int err; |
ebf53f42 AB |
501 | size_t written; |
502 | loff_t addr; | |
503 | uint32_t data = 0; | |
2c7ca5cc QW |
504 | struct ubi_ec_hdr ec_hdr; |
505 | ||
2fff570e AB |
506 | /* |
507 | * Note, we cannot generally define VID header buffers on stack, | |
508 | * because of the way we deal with these buffers (see the header | |
509 | * comment in this file). But we know this is a NOR-specific piece of | |
510 | * code, so we can do this. But yes, this is error-prone and we should | |
511 | * (pre-)allocate VID header buffer instead. | |
512 | */ | |
de75c771 | 513 | struct ubi_vid_hdr vid_hdr; |
ebf53f42 | 514 | |
7ac760c2 | 515 | /* |
2c7ca5cc | 516 | * If VID or EC is valid, we have to corrupt them before erasing. |
7ac760c2 AB |
517 | * It is important to first invalidate the EC header, and then the VID |
518 | * header. Otherwise a power cut may lead to valid EC header and | |
519 | * invalid VID header, in which case UBI will treat this PEB as | |
fbd0107f | 520 | * corrupted and will try to preserve it, and print scary warnings. |
7ac760c2 AB |
521 | */ |
522 | addr = (loff_t)pnum * ubi->peb_size; | |
2c7ca5cc QW |
523 | err = ubi_io_read_ec_hdr(ubi, pnum, &ec_hdr, 0); |
524 | if (err != UBI_IO_BAD_HDR_EBADMSG && err != UBI_IO_BAD_HDR && | |
525 | err != UBI_IO_FF){ | |
eda95cbf | 526 | err = mtd_write(ubi->mtd, addr, 4, &written, (void *)&data); |
2c7ca5cc QW |
527 | if(err) |
528 | goto error; | |
ebf53f42 AB |
529 | } |
530 | ||
2c7ca5cc QW |
531 | err = ubi_io_read_vid_hdr(ubi, pnum, &vid_hdr, 0); |
532 | if (err != UBI_IO_BAD_HDR_EBADMSG && err != UBI_IO_BAD_HDR && | |
533 | err != UBI_IO_FF){ | |
534 | addr += ubi->vid_hdr_aloffset; | |
535 | err = mtd_write(ubi->mtd, addr, 4, &written, (void *)&data); | |
536 | if (err) | |
537 | goto error; | |
7ac760c2 | 538 | } |
2c7ca5cc | 539 | return 0; |
de75c771 | 540 | |
2c7ca5cc | 541 | error: |
de75c771 | 542 | /* |
2c7ca5cc QW |
543 | * The PEB contains a valid VID or EC header, but we cannot invalidate |
544 | * it. Supposedly the flash media or the driver is screwed up, so | |
545 | * return an error. | |
de75c771 | 546 | */ |
32608703 | 547 | ubi_err(ubi, "cannot invalidate PEB %d, write returned %d", pnum, err); |
ef7088e7 | 548 | ubi_dump_flash(ubi, pnum, 0, ubi->peb_size); |
de75c771 | 549 | return -EIO; |
ebf53f42 AB |
550 | } |
551 | ||
801c135c AB |
552 | /** |
553 | * ubi_io_sync_erase - synchronously erase a physical eraseblock. | |
554 | * @ubi: UBI device description object | |
555 | * @pnum: physical eraseblock number to erase | |
556 | * @torture: if this physical eraseblock has to be tortured | |
557 | * | |
558 | * This function synchronously erases physical eraseblock @pnum. If @torture | |
559 | * flag is not zero, the physical eraseblock is checked by means of writing | |
560 | * different patterns to it and reading them back. If the torturing is enabled, | |
025dfdaf | 561 | * the physical eraseblock is erased more than once. |
801c135c AB |
562 | * |
563 | * This function returns the number of erasures made in case of success, %-EIO | |
564 | * if the erasure failed or the torturing test failed, and other negative error | |
565 | * codes in case of other errors. Note, %-EIO means that the physical | |
566 | * eraseblock is bad. | |
567 | */ | |
e88d6e10 | 568 | int ubi_io_sync_erase(struct ubi_device *ubi, int pnum, int torture) |
801c135c AB |
569 | { |
570 | int err, ret = 0; | |
571 | ||
572 | ubi_assert(pnum >= 0 && pnum < ubi->peb_count); | |
573 | ||
8056eb4a | 574 | err = self_check_not_bad(ubi, pnum); |
801c135c | 575 | if (err != 0) |
adbf05e3 | 576 | return err; |
801c135c AB |
577 | |
578 | if (ubi->ro_mode) { | |
32608703 | 579 | ubi_err(ubi, "read-only mode"); |
801c135c AB |
580 | return -EROFS; |
581 | } | |
582 | ||
ebf53f42 AB |
583 | if (ubi->nor_flash) { |
584 | err = nor_erase_prepare(ubi, pnum); | |
585 | if (err) | |
586 | return err; | |
587 | } | |
588 | ||
801c135c AB |
589 | if (torture) { |
590 | ret = torture_peb(ubi, pnum); | |
591 | if (ret < 0) | |
592 | return ret; | |
593 | } | |
594 | ||
595 | err = do_sync_erase(ubi, pnum); | |
596 | if (err) | |
597 | return err; | |
598 | ||
599 | return ret + 1; | |
600 | } | |
601 | ||
602 | /** | |
603 | * ubi_io_is_bad - check if a physical eraseblock is bad. | |
604 | * @ubi: UBI device description object | |
605 | * @pnum: the physical eraseblock number to check | |
606 | * | |
607 | * This function returns a positive number if the physical eraseblock is bad, | |
608 | * zero if not, and a negative error code if an error occurred. | |
609 | */ | |
610 | int ubi_io_is_bad(const struct ubi_device *ubi, int pnum) | |
611 | { | |
612 | struct mtd_info *mtd = ubi->mtd; | |
613 | ||
614 | ubi_assert(pnum >= 0 && pnum < ubi->peb_count); | |
615 | ||
616 | if (ubi->bad_allowed) { | |
617 | int ret; | |
618 | ||
7086c19d | 619 | ret = mtd_block_isbad(mtd, (loff_t)pnum * ubi->peb_size); |
801c135c | 620 | if (ret < 0) |
32608703 | 621 | ubi_err(ubi, "error %d while checking if PEB %d is bad", |
801c135c AB |
622 | ret, pnum); |
623 | else if (ret) | |
624 | dbg_io("PEB %d is bad", pnum); | |
625 | return ret; | |
626 | } | |
627 | ||
628 | return 0; | |
629 | } | |
630 | ||
631 | /** | |
632 | * ubi_io_mark_bad - mark a physical eraseblock as bad. | |
633 | * @ubi: UBI device description object | |
634 | * @pnum: the physical eraseblock number to mark | |
635 | * | |
636 | * This function returns zero in case of success and a negative error code in | |
637 | * case of failure. | |
638 | */ | |
639 | int ubi_io_mark_bad(const struct ubi_device *ubi, int pnum) | |
640 | { | |
641 | int err; | |
642 | struct mtd_info *mtd = ubi->mtd; | |
643 | ||
644 | ubi_assert(pnum >= 0 && pnum < ubi->peb_count); | |
645 | ||
646 | if (ubi->ro_mode) { | |
32608703 | 647 | ubi_err(ubi, "read-only mode"); |
801c135c AB |
648 | return -EROFS; |
649 | } | |
650 | ||
651 | if (!ubi->bad_allowed) | |
652 | return 0; | |
653 | ||
5942ddbc | 654 | err = mtd_block_markbad(mtd, (loff_t)pnum * ubi->peb_size); |
801c135c | 655 | if (err) |
32608703 | 656 | ubi_err(ubi, "cannot mark PEB %d bad, error %d", pnum, err); |
801c135c AB |
657 | return err; |
658 | } | |
659 | ||
660 | /** | |
661 | * validate_ec_hdr - validate an erase counter header. | |
662 | * @ubi: UBI device description object | |
663 | * @ec_hdr: the erase counter header to check | |
664 | * | |
665 | * This function returns zero if the erase counter header is OK, and %1 if | |
666 | * not. | |
667 | */ | |
fe96efc1 | 668 | static int validate_ec_hdr(const struct ubi_device *ubi, |
801c135c AB |
669 | const struct ubi_ec_hdr *ec_hdr) |
670 | { | |
671 | long long ec; | |
fe96efc1 | 672 | int vid_hdr_offset, leb_start; |
801c135c | 673 | |
3261ebd7 CH |
674 | ec = be64_to_cpu(ec_hdr->ec); |
675 | vid_hdr_offset = be32_to_cpu(ec_hdr->vid_hdr_offset); | |
676 | leb_start = be32_to_cpu(ec_hdr->data_offset); | |
801c135c AB |
677 | |
678 | if (ec_hdr->version != UBI_VERSION) { | |
32608703 | 679 | ubi_err(ubi, "node with incompatible UBI version found: this UBI version is %d, image version is %d", |
801c135c AB |
680 | UBI_VERSION, (int)ec_hdr->version); |
681 | goto bad; | |
682 | } | |
683 | ||
684 | if (vid_hdr_offset != ubi->vid_hdr_offset) { | |
32608703 | 685 | ubi_err(ubi, "bad VID header offset %d, expected %d", |
801c135c AB |
686 | vid_hdr_offset, ubi->vid_hdr_offset); |
687 | goto bad; | |
688 | } | |
689 | ||
690 | if (leb_start != ubi->leb_start) { | |
32608703 | 691 | ubi_err(ubi, "bad data offset %d, expected %d", |
801c135c AB |
692 | leb_start, ubi->leb_start); |
693 | goto bad; | |
694 | } | |
695 | ||
696 | if (ec < 0 || ec > UBI_MAX_ERASECOUNTER) { | |
32608703 | 697 | ubi_err(ubi, "bad erase counter %lld", ec); |
801c135c AB |
698 | goto bad; |
699 | } | |
700 | ||
701 | return 0; | |
702 | ||
703 | bad: | |
32608703 | 704 | ubi_err(ubi, "bad EC header"); |
a904e3f1 | 705 | ubi_dump_ec_hdr(ec_hdr); |
25886a36 | 706 | dump_stack(); |
801c135c AB |
707 | return 1; |
708 | } | |
709 | ||
710 | /** | |
711 | * ubi_io_read_ec_hdr - read and check an erase counter header. | |
712 | * @ubi: UBI device description object | |
713 | * @pnum: physical eraseblock to read from | |
714 | * @ec_hdr: a &struct ubi_ec_hdr object where to store the read erase counter | |
715 | * header | |
716 | * @verbose: be verbose if the header is corrupted or was not found | |
717 | * | |
718 | * This function reads erase counter header from physical eraseblock @pnum and | |
719 | * stores it in @ec_hdr. This function also checks CRC checksum of the read | |
720 | * erase counter header. The following codes may be returned: | |
721 | * | |
722 | * o %0 if the CRC checksum is correct and the header was successfully read; | |
723 | * o %UBI_IO_BITFLIPS if the CRC is correct, but bit-flips were detected | |
724 | * and corrected by the flash driver; this is harmless but may indicate that | |
725 | * this eraseblock may become bad soon (but may be not); | |
786d7831 | 726 | * o %UBI_IO_BAD_HDR if the erase counter header is corrupted (a CRC error); |
756e1df1 AB |
727 | * o %UBI_IO_BAD_HDR_EBADMSG is the same as %UBI_IO_BAD_HDR, but there also was |
728 | * a data integrity error (uncorrectable ECC error in case of NAND); | |
74d82d26 | 729 | * o %UBI_IO_FF if only 0xFF bytes were read (the PEB is supposedly empty) |
801c135c AB |
730 | * o a negative error code in case of failure. |
731 | */ | |
e88d6e10 | 732 | int ubi_io_read_ec_hdr(struct ubi_device *ubi, int pnum, |
801c135c AB |
733 | struct ubi_ec_hdr *ec_hdr, int verbose) |
734 | { | |
92e1a7d9 | 735 | int err, read_err; |
801c135c AB |
736 | uint32_t crc, magic, hdr_crc; |
737 | ||
738 | dbg_io("read EC header from PEB %d", pnum); | |
739 | ubi_assert(pnum >= 0 && pnum < ubi->peb_count); | |
740 | ||
92e1a7d9 AB |
741 | read_err = ubi_io_read(ubi, ec_hdr, pnum, 0, UBI_EC_HDR_SIZE); |
742 | if (read_err) { | |
d57f4054 | 743 | if (read_err != UBI_IO_BITFLIPS && !mtd_is_eccerr(read_err)) |
92e1a7d9 | 744 | return read_err; |
801c135c AB |
745 | |
746 | /* | |
747 | * We read all the data, but either a correctable bit-flip | |
756e1df1 AB |
748 | * occurred, or MTD reported a data integrity error |
749 | * (uncorrectable ECC error in case of NAND). The former is | |
750 | * harmless, the later may mean that the read data is | |
751 | * corrupted. But we have a CRC check-sum and we will detect | |
752 | * this. If the EC header is still OK, we just report this as | |
753 | * there was a bit-flip, to force scrubbing. | |
801c135c | 754 | */ |
801c135c AB |
755 | } |
756 | ||
3261ebd7 | 757 | magic = be32_to_cpu(ec_hdr->magic); |
801c135c | 758 | if (magic != UBI_EC_HDR_MAGIC) { |
d57f4054 | 759 | if (mtd_is_eccerr(read_err)) |
92e1a7d9 | 760 | return UBI_IO_BAD_HDR_EBADMSG; |
eb89580e | 761 | |
801c135c AB |
762 | /* |
763 | * The magic field is wrong. Let's check if we have read all | |
764 | * 0xFF. If yes, this physical eraseblock is assumed to be | |
765 | * empty. | |
801c135c | 766 | */ |
bb00e180 | 767 | if (ubi_check_pattern(ec_hdr, 0xFF, UBI_EC_HDR_SIZE)) { |
801c135c | 768 | /* The physical eraseblock is supposedly empty */ |
801c135c | 769 | if (verbose) |
32608703 | 770 | ubi_warn(ubi, "no EC header found at PEB %d, only 0xFF bytes", |
049333ce AB |
771 | pnum); |
772 | dbg_bld("no EC header found at PEB %d, only 0xFF bytes", | |
773 | pnum); | |
92e1a7d9 AB |
774 | if (!read_err) |
775 | return UBI_IO_FF; | |
776 | else | |
777 | return UBI_IO_FF_BITFLIPS; | |
801c135c AB |
778 | } |
779 | ||
780 | /* | |
781 | * This is not a valid erase counter header, and these are not | |
782 | * 0xFF bytes. Report that the header is corrupted. | |
783 | */ | |
784 | if (verbose) { | |
32608703 | 785 | ubi_warn(ubi, "bad magic number at PEB %d: %08x instead of %08x", |
049333ce | 786 | pnum, magic, UBI_EC_HDR_MAGIC); |
a904e3f1 | 787 | ubi_dump_ec_hdr(ec_hdr); |
6f9fdf62 | 788 | } |
049333ce AB |
789 | dbg_bld("bad magic number at PEB %d: %08x instead of %08x", |
790 | pnum, magic, UBI_EC_HDR_MAGIC); | |
786d7831 | 791 | return UBI_IO_BAD_HDR; |
801c135c AB |
792 | } |
793 | ||
794 | crc = crc32(UBI_CRC32_INIT, ec_hdr, UBI_EC_HDR_SIZE_CRC); | |
3261ebd7 | 795 | hdr_crc = be32_to_cpu(ec_hdr->hdr_crc); |
801c135c AB |
796 | |
797 | if (hdr_crc != crc) { | |
798 | if (verbose) { | |
32608703 | 799 | ubi_warn(ubi, "bad EC header CRC at PEB %d, calculated %#08x, read %#08x", |
049333ce | 800 | pnum, crc, hdr_crc); |
a904e3f1 | 801 | ubi_dump_ec_hdr(ec_hdr); |
6f9fdf62 | 802 | } |
049333ce AB |
803 | dbg_bld("bad EC header CRC at PEB %d, calculated %#08x, read %#08x", |
804 | pnum, crc, hdr_crc); | |
92e1a7d9 AB |
805 | |
806 | if (!read_err) | |
807 | return UBI_IO_BAD_HDR; | |
808 | else | |
809 | return UBI_IO_BAD_HDR_EBADMSG; | |
801c135c AB |
810 | } |
811 | ||
812 | /* And of course validate what has just been read from the media */ | |
813 | err = validate_ec_hdr(ubi, ec_hdr); | |
814 | if (err) { | |
32608703 | 815 | ubi_err(ubi, "validation failed for PEB %d", pnum); |
801c135c AB |
816 | return -EINVAL; |
817 | } | |
818 | ||
eb89580e AB |
819 | /* |
820 | * If there was %-EBADMSG, but the header CRC is still OK, report about | |
821 | * a bit-flip to force scrubbing on this PEB. | |
822 | */ | |
801c135c AB |
823 | return read_err ? UBI_IO_BITFLIPS : 0; |
824 | } | |
825 | ||
826 | /** | |
827 | * ubi_io_write_ec_hdr - write an erase counter header. | |
828 | * @ubi: UBI device description object | |
829 | * @pnum: physical eraseblock to write to | |
830 | * @ec_hdr: the erase counter header to write | |
831 | * | |
832 | * This function writes erase counter header described by @ec_hdr to physical | |
833 | * eraseblock @pnum. It also fills most fields of @ec_hdr before writing, so | |
834 | * the caller do not have to fill them. Callers must only fill the @ec_hdr->ec | |
835 | * field. | |
836 | * | |
837 | * This function returns zero in case of success and a negative error code in | |
838 | * case of failure. If %-EIO is returned, the physical eraseblock most probably | |
839 | * went bad. | |
840 | */ | |
e88d6e10 | 841 | int ubi_io_write_ec_hdr(struct ubi_device *ubi, int pnum, |
801c135c AB |
842 | struct ubi_ec_hdr *ec_hdr) |
843 | { | |
844 | int err; | |
845 | uint32_t crc; | |
846 | ||
847 | dbg_io("write EC header to PEB %d", pnum); | |
848 | ubi_assert(pnum >= 0 && pnum < ubi->peb_count); | |
849 | ||
3261ebd7 | 850 | ec_hdr->magic = cpu_to_be32(UBI_EC_HDR_MAGIC); |
801c135c | 851 | ec_hdr->version = UBI_VERSION; |
3261ebd7 CH |
852 | ec_hdr->vid_hdr_offset = cpu_to_be32(ubi->vid_hdr_offset); |
853 | ec_hdr->data_offset = cpu_to_be32(ubi->leb_start); | |
0c6c7fa1 | 854 | ec_hdr->image_seq = cpu_to_be32(ubi->image_seq); |
801c135c | 855 | crc = crc32(UBI_CRC32_INIT, ec_hdr, UBI_EC_HDR_SIZE_CRC); |
3261ebd7 | 856 | ec_hdr->hdr_crc = cpu_to_be32(crc); |
801c135c | 857 | |
8056eb4a | 858 | err = self_check_ec_hdr(ubi, pnum, ec_hdr); |
801c135c | 859 | if (err) |
adbf05e3 | 860 | return err; |
801c135c | 861 | |
50269067 | 862 | if (ubi_dbg_power_cut(ubi, POWER_CUT_EC_WRITE)) |
863 | return -EROFS; | |
864 | ||
801c135c AB |
865 | err = ubi_io_write(ubi, ec_hdr, pnum, 0, ubi->ec_hdr_alsize); |
866 | return err; | |
867 | } | |
868 | ||
869 | /** | |
870 | * validate_vid_hdr - validate a volume identifier header. | |
871 | * @ubi: UBI device description object | |
872 | * @vid_hdr: the volume identifier header to check | |
873 | * | |
874 | * This function checks that data stored in the volume identifier header | |
875 | * @vid_hdr. Returns zero if the VID header is OK and %1 if not. | |
876 | */ | |
877 | static int validate_vid_hdr(const struct ubi_device *ubi, | |
878 | const struct ubi_vid_hdr *vid_hdr) | |
879 | { | |
880 | int vol_type = vid_hdr->vol_type; | |
881 | int copy_flag = vid_hdr->copy_flag; | |
3261ebd7 CH |
882 | int vol_id = be32_to_cpu(vid_hdr->vol_id); |
883 | int lnum = be32_to_cpu(vid_hdr->lnum); | |
801c135c | 884 | int compat = vid_hdr->compat; |
3261ebd7 CH |
885 | int data_size = be32_to_cpu(vid_hdr->data_size); |
886 | int used_ebs = be32_to_cpu(vid_hdr->used_ebs); | |
887 | int data_pad = be32_to_cpu(vid_hdr->data_pad); | |
888 | int data_crc = be32_to_cpu(vid_hdr->data_crc); | |
801c135c AB |
889 | int usable_leb_size = ubi->leb_size - data_pad; |
890 | ||
891 | if (copy_flag != 0 && copy_flag != 1) { | |
32608703 | 892 | ubi_err(ubi, "bad copy_flag"); |
801c135c AB |
893 | goto bad; |
894 | } | |
895 | ||
896 | if (vol_id < 0 || lnum < 0 || data_size < 0 || used_ebs < 0 || | |
897 | data_pad < 0) { | |
32608703 | 898 | ubi_err(ubi, "negative values"); |
801c135c AB |
899 | goto bad; |
900 | } | |
901 | ||
902 | if (vol_id >= UBI_MAX_VOLUMES && vol_id < UBI_INTERNAL_VOL_START) { | |
32608703 | 903 | ubi_err(ubi, "bad vol_id"); |
801c135c AB |
904 | goto bad; |
905 | } | |
906 | ||
907 | if (vol_id < UBI_INTERNAL_VOL_START && compat != 0) { | |
32608703 | 908 | ubi_err(ubi, "bad compat"); |
801c135c AB |
909 | goto bad; |
910 | } | |
911 | ||
912 | if (vol_id >= UBI_INTERNAL_VOL_START && compat != UBI_COMPAT_DELETE && | |
913 | compat != UBI_COMPAT_RO && compat != UBI_COMPAT_PRESERVE && | |
914 | compat != UBI_COMPAT_REJECT) { | |
32608703 | 915 | ubi_err(ubi, "bad compat"); |
801c135c AB |
916 | goto bad; |
917 | } | |
918 | ||
919 | if (vol_type != UBI_VID_DYNAMIC && vol_type != UBI_VID_STATIC) { | |
32608703 | 920 | ubi_err(ubi, "bad vol_type"); |
801c135c AB |
921 | goto bad; |
922 | } | |
923 | ||
924 | if (data_pad >= ubi->leb_size / 2) { | |
32608703 | 925 | ubi_err(ubi, "bad data_pad"); |
801c135c AB |
926 | goto bad; |
927 | } | |
928 | ||
281fda27 RW |
929 | if (data_size > ubi->leb_size) { |
930 | ubi_err(ubi, "bad data_size"); | |
931 | goto bad; | |
932 | } | |
933 | ||
801c135c AB |
934 | if (vol_type == UBI_VID_STATIC) { |
935 | /* | |
936 | * Although from high-level point of view static volumes may | |
937 | * contain zero bytes of data, but no VID headers can contain | |
938 | * zero at these fields, because they empty volumes do not have | |
939 | * mapped logical eraseblocks. | |
940 | */ | |
941 | if (used_ebs == 0) { | |
32608703 | 942 | ubi_err(ubi, "zero used_ebs"); |
801c135c AB |
943 | goto bad; |
944 | } | |
945 | if (data_size == 0) { | |
32608703 | 946 | ubi_err(ubi, "zero data_size"); |
801c135c AB |
947 | goto bad; |
948 | } | |
949 | if (lnum < used_ebs - 1) { | |
950 | if (data_size != usable_leb_size) { | |
32608703 | 951 | ubi_err(ubi, "bad data_size"); |
801c135c AB |
952 | goto bad; |
953 | } | |
954 | } else if (lnum == used_ebs - 1) { | |
955 | if (data_size == 0) { | |
32608703 | 956 | ubi_err(ubi, "bad data_size at last LEB"); |
801c135c AB |
957 | goto bad; |
958 | } | |
959 | } else { | |
32608703 | 960 | ubi_err(ubi, "too high lnum"); |
801c135c AB |
961 | goto bad; |
962 | } | |
963 | } else { | |
964 | if (copy_flag == 0) { | |
965 | if (data_crc != 0) { | |
32608703 | 966 | ubi_err(ubi, "non-zero data CRC"); |
801c135c AB |
967 | goto bad; |
968 | } | |
969 | if (data_size != 0) { | |
32608703 | 970 | ubi_err(ubi, "non-zero data_size"); |
801c135c AB |
971 | goto bad; |
972 | } | |
973 | } else { | |
974 | if (data_size == 0) { | |
32608703 | 975 | ubi_err(ubi, "zero data_size of copy"); |
801c135c AB |
976 | goto bad; |
977 | } | |
978 | } | |
979 | if (used_ebs != 0) { | |
32608703 | 980 | ubi_err(ubi, "bad used_ebs"); |
801c135c AB |
981 | goto bad; |
982 | } | |
983 | } | |
984 | ||
985 | return 0; | |
986 | ||
987 | bad: | |
32608703 | 988 | ubi_err(ubi, "bad VID header"); |
a904e3f1 | 989 | ubi_dump_vid_hdr(vid_hdr); |
25886a36 | 990 | dump_stack(); |
801c135c AB |
991 | return 1; |
992 | } | |
993 | ||
994 | /** | |
995 | * ubi_io_read_vid_hdr - read and check a volume identifier header. | |
996 | * @ubi: UBI device description object | |
997 | * @pnum: physical eraseblock number to read from | |
998 | * @vid_hdr: &struct ubi_vid_hdr object where to store the read volume | |
999 | * identifier header | |
1000 | * @verbose: be verbose if the header is corrupted or wasn't found | |
1001 | * | |
1002 | * This function reads the volume identifier header from physical eraseblock | |
1003 | * @pnum and stores it in @vid_hdr. It also checks CRC checksum of the read | |
74d82d26 AB |
1004 | * volume identifier header. The error codes are the same as in |
1005 | * 'ubi_io_read_ec_hdr()'. | |
801c135c | 1006 | * |
74d82d26 AB |
1007 | * Note, the implementation of this function is also very similar to |
1008 | * 'ubi_io_read_ec_hdr()', so refer commentaries in 'ubi_io_read_ec_hdr()'. | |
801c135c | 1009 | */ |
e88d6e10 | 1010 | int ubi_io_read_vid_hdr(struct ubi_device *ubi, int pnum, |
801c135c AB |
1011 | struct ubi_vid_hdr *vid_hdr, int verbose) |
1012 | { | |
92e1a7d9 | 1013 | int err, read_err; |
801c135c AB |
1014 | uint32_t crc, magic, hdr_crc; |
1015 | void *p; | |
1016 | ||
1017 | dbg_io("read VID header from PEB %d", pnum); | |
1018 | ubi_assert(pnum >= 0 && pnum < ubi->peb_count); | |
1019 | ||
1020 | p = (char *)vid_hdr - ubi->vid_hdr_shift; | |
92e1a7d9 | 1021 | read_err = ubi_io_read(ubi, p, pnum, ubi->vid_hdr_aloffset, |
8a8e8d2f | 1022 | ubi->vid_hdr_shift + UBI_VID_HDR_SIZE); |
d57f4054 | 1023 | if (read_err && read_err != UBI_IO_BITFLIPS && !mtd_is_eccerr(read_err)) |
92e1a7d9 | 1024 | return read_err; |
801c135c | 1025 | |
3261ebd7 | 1026 | magic = be32_to_cpu(vid_hdr->magic); |
801c135c | 1027 | if (magic != UBI_VID_HDR_MAGIC) { |
d57f4054 | 1028 | if (mtd_is_eccerr(read_err)) |
92e1a7d9 | 1029 | return UBI_IO_BAD_HDR_EBADMSG; |
eb89580e | 1030 | |
bb00e180 | 1031 | if (ubi_check_pattern(vid_hdr, 0xFF, UBI_VID_HDR_SIZE)) { |
801c135c | 1032 | if (verbose) |
32608703 | 1033 | ubi_warn(ubi, "no VID header found at PEB %d, only 0xFF bytes", |
049333ce AB |
1034 | pnum); |
1035 | dbg_bld("no VID header found at PEB %d, only 0xFF bytes", | |
1036 | pnum); | |
92e1a7d9 AB |
1037 | if (!read_err) |
1038 | return UBI_IO_FF; | |
1039 | else | |
1040 | return UBI_IO_FF_BITFLIPS; | |
801c135c AB |
1041 | } |
1042 | ||
801c135c | 1043 | if (verbose) { |
32608703 | 1044 | ubi_warn(ubi, "bad magic number at PEB %d: %08x instead of %08x", |
049333ce | 1045 | pnum, magic, UBI_VID_HDR_MAGIC); |
a904e3f1 | 1046 | ubi_dump_vid_hdr(vid_hdr); |
6f9fdf62 | 1047 | } |
049333ce AB |
1048 | dbg_bld("bad magic number at PEB %d: %08x instead of %08x", |
1049 | pnum, magic, UBI_VID_HDR_MAGIC); | |
786d7831 | 1050 | return UBI_IO_BAD_HDR; |
801c135c AB |
1051 | } |
1052 | ||
1053 | crc = crc32(UBI_CRC32_INIT, vid_hdr, UBI_VID_HDR_SIZE_CRC); | |
3261ebd7 | 1054 | hdr_crc = be32_to_cpu(vid_hdr->hdr_crc); |
801c135c AB |
1055 | |
1056 | if (hdr_crc != crc) { | |
1057 | if (verbose) { | |
32608703 | 1058 | ubi_warn(ubi, "bad CRC at PEB %d, calculated %#08x, read %#08x", |
049333ce | 1059 | pnum, crc, hdr_crc); |
a904e3f1 | 1060 | ubi_dump_vid_hdr(vid_hdr); |
6f9fdf62 | 1061 | } |
049333ce AB |
1062 | dbg_bld("bad CRC at PEB %d, calculated %#08x, read %#08x", |
1063 | pnum, crc, hdr_crc); | |
92e1a7d9 AB |
1064 | if (!read_err) |
1065 | return UBI_IO_BAD_HDR; | |
1066 | else | |
1067 | return UBI_IO_BAD_HDR_EBADMSG; | |
801c135c AB |
1068 | } |
1069 | ||
801c135c AB |
1070 | err = validate_vid_hdr(ubi, vid_hdr); |
1071 | if (err) { | |
32608703 | 1072 | ubi_err(ubi, "validation failed for PEB %d", pnum); |
801c135c AB |
1073 | return -EINVAL; |
1074 | } | |
1075 | ||
1076 | return read_err ? UBI_IO_BITFLIPS : 0; | |
1077 | } | |
1078 | ||
1079 | /** | |
1080 | * ubi_io_write_vid_hdr - write a volume identifier header. | |
1081 | * @ubi: UBI device description object | |
1082 | * @pnum: the physical eraseblock number to write to | |
1083 | * @vid_hdr: the volume identifier header to write | |
1084 | * | |
1085 | * This function writes the volume identifier header described by @vid_hdr to | |
1086 | * physical eraseblock @pnum. This function automatically fills the | |
1087 | * @vid_hdr->magic and the @vid_hdr->version fields, as well as calculates | |
1088 | * header CRC checksum and stores it at vid_hdr->hdr_crc. | |
1089 | * | |
1090 | * This function returns zero in case of success and a negative error code in | |
1091 | * case of failure. If %-EIO is returned, the physical eraseblock probably went | |
1092 | * bad. | |
1093 | */ | |
e88d6e10 | 1094 | int ubi_io_write_vid_hdr(struct ubi_device *ubi, int pnum, |
801c135c AB |
1095 | struct ubi_vid_hdr *vid_hdr) |
1096 | { | |
1097 | int err; | |
1098 | uint32_t crc; | |
1099 | void *p; | |
1100 | ||
1101 | dbg_io("write VID header to PEB %d", pnum); | |
1102 | ubi_assert(pnum >= 0 && pnum < ubi->peb_count); | |
1103 | ||
8056eb4a | 1104 | err = self_check_peb_ec_hdr(ubi, pnum); |
801c135c | 1105 | if (err) |
adbf05e3 | 1106 | return err; |
801c135c | 1107 | |
3261ebd7 | 1108 | vid_hdr->magic = cpu_to_be32(UBI_VID_HDR_MAGIC); |
801c135c AB |
1109 | vid_hdr->version = UBI_VERSION; |
1110 | crc = crc32(UBI_CRC32_INIT, vid_hdr, UBI_VID_HDR_SIZE_CRC); | |
3261ebd7 | 1111 | vid_hdr->hdr_crc = cpu_to_be32(crc); |
801c135c | 1112 | |
8056eb4a | 1113 | err = self_check_vid_hdr(ubi, pnum, vid_hdr); |
801c135c | 1114 | if (err) |
adbf05e3 | 1115 | return err; |
801c135c | 1116 | |
50269067 | 1117 | if (ubi_dbg_power_cut(ubi, POWER_CUT_VID_WRITE)) |
1118 | return -EROFS; | |
1119 | ||
801c135c AB |
1120 | p = (char *)vid_hdr - ubi->vid_hdr_shift; |
1121 | err = ubi_io_write(ubi, p, pnum, ubi->vid_hdr_aloffset, | |
1122 | ubi->vid_hdr_alsize); | |
1123 | return err; | |
1124 | } | |
1125 | ||
801c135c | 1126 | /** |
8056eb4a | 1127 | * self_check_not_bad - ensure that a physical eraseblock is not bad. |
801c135c AB |
1128 | * @ubi: UBI device description object |
1129 | * @pnum: physical eraseblock number to check | |
1130 | * | |
adbf05e3 AB |
1131 | * This function returns zero if the physical eraseblock is good, %-EINVAL if |
1132 | * it is bad and a negative error code if an error occurred. | |
801c135c | 1133 | */ |
8056eb4a | 1134 | static int self_check_not_bad(const struct ubi_device *ubi, int pnum) |
801c135c AB |
1135 | { |
1136 | int err; | |
1137 | ||
64575574 | 1138 | if (!ubi_dbg_chk_io(ubi)) |
92d124f5 AB |
1139 | return 0; |
1140 | ||
801c135c AB |
1141 | err = ubi_io_is_bad(ubi, pnum); |
1142 | if (!err) | |
1143 | return err; | |
1144 | ||
32608703 | 1145 | ubi_err(ubi, "self-check failed for PEB %d", pnum); |
25886a36 | 1146 | dump_stack(); |
adbf05e3 | 1147 | return err > 0 ? -EINVAL : err; |
801c135c AB |
1148 | } |
1149 | ||
1150 | /** | |
8056eb4a | 1151 | * self_check_ec_hdr - check if an erase counter header is all right. |
801c135c AB |
1152 | * @ubi: UBI device description object |
1153 | * @pnum: physical eraseblock number the erase counter header belongs to | |
1154 | * @ec_hdr: the erase counter header to check | |
1155 | * | |
1156 | * This function returns zero if the erase counter header contains valid | |
adbf05e3 | 1157 | * values, and %-EINVAL if not. |
801c135c | 1158 | */ |
8056eb4a AB |
1159 | static int self_check_ec_hdr(const struct ubi_device *ubi, int pnum, |
1160 | const struct ubi_ec_hdr *ec_hdr) | |
801c135c AB |
1161 | { |
1162 | int err; | |
1163 | uint32_t magic; | |
1164 | ||
64575574 | 1165 | if (!ubi_dbg_chk_io(ubi)) |
92d124f5 AB |
1166 | return 0; |
1167 | ||
3261ebd7 | 1168 | magic = be32_to_cpu(ec_hdr->magic); |
801c135c | 1169 | if (magic != UBI_EC_HDR_MAGIC) { |
32608703 | 1170 | ubi_err(ubi, "bad magic %#08x, must be %#08x", |
801c135c AB |
1171 | magic, UBI_EC_HDR_MAGIC); |
1172 | goto fail; | |
1173 | } | |
1174 | ||
1175 | err = validate_ec_hdr(ubi, ec_hdr); | |
1176 | if (err) { | |
32608703 | 1177 | ubi_err(ubi, "self-check failed for PEB %d", pnum); |
801c135c AB |
1178 | goto fail; |
1179 | } | |
1180 | ||
1181 | return 0; | |
1182 | ||
1183 | fail: | |
a904e3f1 | 1184 | ubi_dump_ec_hdr(ec_hdr); |
25886a36 | 1185 | dump_stack(); |
adbf05e3 | 1186 | return -EINVAL; |
801c135c AB |
1187 | } |
1188 | ||
1189 | /** | |
8056eb4a | 1190 | * self_check_peb_ec_hdr - check erase counter header. |
801c135c AB |
1191 | * @ubi: UBI device description object |
1192 | * @pnum: the physical eraseblock number to check | |
1193 | * | |
adbf05e3 AB |
1194 | * This function returns zero if the erase counter header is all right and and |
1195 | * a negative error code if not or if an error occurred. | |
801c135c | 1196 | */ |
8056eb4a | 1197 | static int self_check_peb_ec_hdr(const struct ubi_device *ubi, int pnum) |
801c135c AB |
1198 | { |
1199 | int err; | |
1200 | uint32_t crc, hdr_crc; | |
1201 | struct ubi_ec_hdr *ec_hdr; | |
1202 | ||
64575574 | 1203 | if (!ubi_dbg_chk_io(ubi)) |
92d124f5 AB |
1204 | return 0; |
1205 | ||
33818bbb | 1206 | ec_hdr = kzalloc(ubi->ec_hdr_alsize, GFP_NOFS); |
801c135c AB |
1207 | if (!ec_hdr) |
1208 | return -ENOMEM; | |
1209 | ||
1210 | err = ubi_io_read(ubi, ec_hdr, pnum, 0, UBI_EC_HDR_SIZE); | |
d57f4054 | 1211 | if (err && err != UBI_IO_BITFLIPS && !mtd_is_eccerr(err)) |
801c135c AB |
1212 | goto exit; |
1213 | ||
1214 | crc = crc32(UBI_CRC32_INIT, ec_hdr, UBI_EC_HDR_SIZE_CRC); | |
3261ebd7 | 1215 | hdr_crc = be32_to_cpu(ec_hdr->hdr_crc); |
801c135c | 1216 | if (hdr_crc != crc) { |
32608703 TB |
1217 | ubi_err(ubi, "bad CRC, calculated %#08x, read %#08x", |
1218 | crc, hdr_crc); | |
1219 | ubi_err(ubi, "self-check failed for PEB %d", pnum); | |
a904e3f1 | 1220 | ubi_dump_ec_hdr(ec_hdr); |
25886a36 | 1221 | dump_stack(); |
adbf05e3 | 1222 | err = -EINVAL; |
801c135c AB |
1223 | goto exit; |
1224 | } | |
1225 | ||
8056eb4a | 1226 | err = self_check_ec_hdr(ubi, pnum, ec_hdr); |
801c135c AB |
1227 | |
1228 | exit: | |
1229 | kfree(ec_hdr); | |
1230 | return err; | |
1231 | } | |
1232 | ||
1233 | /** | |
8056eb4a | 1234 | * self_check_vid_hdr - check that a volume identifier header is all right. |
801c135c AB |
1235 | * @ubi: UBI device description object |
1236 | * @pnum: physical eraseblock number the volume identifier header belongs to | |
1237 | * @vid_hdr: the volume identifier header to check | |
1238 | * | |
1239 | * This function returns zero if the volume identifier header is all right, and | |
adbf05e3 | 1240 | * %-EINVAL if not. |
801c135c | 1241 | */ |
8056eb4a AB |
1242 | static int self_check_vid_hdr(const struct ubi_device *ubi, int pnum, |
1243 | const struct ubi_vid_hdr *vid_hdr) | |
801c135c AB |
1244 | { |
1245 | int err; | |
1246 | uint32_t magic; | |
1247 | ||
64575574 | 1248 | if (!ubi_dbg_chk_io(ubi)) |
92d124f5 AB |
1249 | return 0; |
1250 | ||
3261ebd7 | 1251 | magic = be32_to_cpu(vid_hdr->magic); |
801c135c | 1252 | if (magic != UBI_VID_HDR_MAGIC) { |
32608703 | 1253 | ubi_err(ubi, "bad VID header magic %#08x at PEB %d, must be %#08x", |
801c135c AB |
1254 | magic, pnum, UBI_VID_HDR_MAGIC); |
1255 | goto fail; | |
1256 | } | |
1257 | ||
1258 | err = validate_vid_hdr(ubi, vid_hdr); | |
1259 | if (err) { | |
32608703 | 1260 | ubi_err(ubi, "self-check failed for PEB %d", pnum); |
801c135c AB |
1261 | goto fail; |
1262 | } | |
1263 | ||
1264 | return err; | |
1265 | ||
1266 | fail: | |
32608703 | 1267 | ubi_err(ubi, "self-check failed for PEB %d", pnum); |
a904e3f1 | 1268 | ubi_dump_vid_hdr(vid_hdr); |
25886a36 | 1269 | dump_stack(); |
adbf05e3 | 1270 | return -EINVAL; |
801c135c AB |
1271 | |
1272 | } | |
1273 | ||
1274 | /** | |
8056eb4a | 1275 | * self_check_peb_vid_hdr - check volume identifier header. |
801c135c AB |
1276 | * @ubi: UBI device description object |
1277 | * @pnum: the physical eraseblock number to check | |
1278 | * | |
1279 | * This function returns zero if the volume identifier header is all right, | |
adbf05e3 | 1280 | * and a negative error code if not or if an error occurred. |
801c135c | 1281 | */ |
8056eb4a | 1282 | static int self_check_peb_vid_hdr(const struct ubi_device *ubi, int pnum) |
801c135c AB |
1283 | { |
1284 | int err; | |
1285 | uint32_t crc, hdr_crc; | |
1286 | struct ubi_vid_hdr *vid_hdr; | |
1287 | void *p; | |
1288 | ||
64575574 | 1289 | if (!ubi_dbg_chk_io(ubi)) |
92d124f5 AB |
1290 | return 0; |
1291 | ||
33818bbb | 1292 | vid_hdr = ubi_zalloc_vid_hdr(ubi, GFP_NOFS); |
801c135c AB |
1293 | if (!vid_hdr) |
1294 | return -ENOMEM; | |
1295 | ||
1296 | p = (char *)vid_hdr - ubi->vid_hdr_shift; | |
1297 | err = ubi_io_read(ubi, p, pnum, ubi->vid_hdr_aloffset, | |
1298 | ubi->vid_hdr_alsize); | |
d57f4054 | 1299 | if (err && err != UBI_IO_BITFLIPS && !mtd_is_eccerr(err)) |
801c135c AB |
1300 | goto exit; |
1301 | ||
2e69d491 | 1302 | crc = crc32(UBI_CRC32_INIT, vid_hdr, UBI_VID_HDR_SIZE_CRC); |
3261ebd7 | 1303 | hdr_crc = be32_to_cpu(vid_hdr->hdr_crc); |
801c135c | 1304 | if (hdr_crc != crc) { |
32608703 | 1305 | ubi_err(ubi, "bad VID header CRC at PEB %d, calculated %#08x, read %#08x", |
049333ce | 1306 | pnum, crc, hdr_crc); |
32608703 | 1307 | ubi_err(ubi, "self-check failed for PEB %d", pnum); |
a904e3f1 | 1308 | ubi_dump_vid_hdr(vid_hdr); |
25886a36 | 1309 | dump_stack(); |
adbf05e3 | 1310 | err = -EINVAL; |
801c135c AB |
1311 | goto exit; |
1312 | } | |
1313 | ||
8056eb4a | 1314 | err = self_check_vid_hdr(ubi, pnum, vid_hdr); |
801c135c AB |
1315 | |
1316 | exit: | |
1317 | ubi_free_vid_hdr(ubi, vid_hdr); | |
1318 | return err; | |
1319 | } | |
1320 | ||
6e9065d7 | 1321 | /** |
97d6104b | 1322 | * self_check_write - make sure write succeeded. |
6e9065d7 AB |
1323 | * @ubi: UBI device description object |
1324 | * @buf: buffer with data which were written | |
1325 | * @pnum: physical eraseblock number the data were written to | |
1326 | * @offset: offset within the physical eraseblock the data were written to | |
1327 | * @len: how many bytes were written | |
1328 | * | |
1329 | * This functions reads data which were recently written and compares it with | |
1330 | * the original data buffer - the data have to match. Returns zero if the data | |
1331 | * match and a negative error code if not or in case of failure. | |
1332 | */ | |
97d6104b AB |
1333 | static int self_check_write(struct ubi_device *ubi, const void *buf, int pnum, |
1334 | int offset, int len) | |
6e9065d7 AB |
1335 | { |
1336 | int err, i; | |
7950d023 | 1337 | size_t read; |
a7586743 | 1338 | void *buf1; |
7950d023 | 1339 | loff_t addr = (loff_t)pnum * ubi->peb_size + offset; |
6e9065d7 | 1340 | |
64575574 | 1341 | if (!ubi_dbg_chk_io(ubi)) |
92d124f5 AB |
1342 | return 0; |
1343 | ||
3d46b316 | 1344 | buf1 = __vmalloc(len, GFP_NOFS, PAGE_KERNEL); |
a7586743 | 1345 | if (!buf1) { |
32608703 | 1346 | ubi_err(ubi, "cannot allocate memory to check writes"); |
a7586743 AB |
1347 | return 0; |
1348 | } | |
1349 | ||
329ad399 | 1350 | err = mtd_read(ubi->mtd, addr, len, &read, buf1); |
d57f4054 | 1351 | if (err && !mtd_is_bitflip(err)) |
a7586743 | 1352 | goto out_free; |
6e9065d7 AB |
1353 | |
1354 | for (i = 0; i < len; i++) { | |
1355 | uint8_t c = ((uint8_t *)buf)[i]; | |
a7586743 | 1356 | uint8_t c1 = ((uint8_t *)buf1)[i]; |
6e9065d7 AB |
1357 | int dump_len; |
1358 | ||
1359 | if (c == c1) | |
1360 | continue; | |
1361 | ||
32608703 | 1362 | ubi_err(ubi, "self-check failed for PEB %d:%d, len %d", |
6e9065d7 | 1363 | pnum, offset, len); |
32608703 | 1364 | ubi_msg(ubi, "data differ at position %d", i); |
6e9065d7 | 1365 | dump_len = max_t(int, 128, len - i); |
32608703 | 1366 | ubi_msg(ubi, "hex dump of the original buffer from %d to %d", |
6e9065d7 AB |
1367 | i, i + dump_len); |
1368 | print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1, | |
1369 | buf + i, dump_len, 1); | |
32608703 | 1370 | ubi_msg(ubi, "hex dump of the read buffer from %d to %d", |
6e9065d7 AB |
1371 | i, i + dump_len); |
1372 | print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1, | |
a7586743 | 1373 | buf1 + i, dump_len, 1); |
25886a36 | 1374 | dump_stack(); |
6e9065d7 | 1375 | err = -EINVAL; |
a7586743 | 1376 | goto out_free; |
6e9065d7 | 1377 | } |
6e9065d7 | 1378 | |
a7586743 | 1379 | vfree(buf1); |
6e9065d7 AB |
1380 | return 0; |
1381 | ||
a7586743 AB |
1382 | out_free: |
1383 | vfree(buf1); | |
6e9065d7 AB |
1384 | return err; |
1385 | } | |
1386 | ||
801c135c | 1387 | /** |
97d6104b | 1388 | * ubi_self_check_all_ff - check that a region of flash is empty. |
801c135c AB |
1389 | * @ubi: UBI device description object |
1390 | * @pnum: the physical eraseblock number to check | |
1391 | * @offset: the starting offset within the physical eraseblock to check | |
1392 | * @len: the length of the region to check | |
1393 | * | |
1394 | * This function returns zero if only 0xFF bytes are present at offset | |
adbf05e3 AB |
1395 | * @offset of the physical eraseblock @pnum, and a negative error code if not |
1396 | * or if an error occurred. | |
801c135c | 1397 | */ |
97d6104b | 1398 | int ubi_self_check_all_ff(struct ubi_device *ubi, int pnum, int offset, int len) |
801c135c AB |
1399 | { |
1400 | size_t read; | |
1401 | int err; | |
332873d6 | 1402 | void *buf; |
801c135c AB |
1403 | loff_t addr = (loff_t)pnum * ubi->peb_size + offset; |
1404 | ||
64575574 | 1405 | if (!ubi_dbg_chk_io(ubi)) |
92d124f5 AB |
1406 | return 0; |
1407 | ||
3d46b316 | 1408 | buf = __vmalloc(len, GFP_NOFS, PAGE_KERNEL); |
332873d6 | 1409 | if (!buf) { |
32608703 | 1410 | ubi_err(ubi, "cannot allocate memory to check for 0xFFs"); |
332873d6 AB |
1411 | return 0; |
1412 | } | |
1413 | ||
329ad399 | 1414 | err = mtd_read(ubi->mtd, addr, len, &read, buf); |
d57f4054 | 1415 | if (err && !mtd_is_bitflip(err)) { |
32608703 | 1416 | ubi_err(ubi, "err %d while reading %d bytes from PEB %d:%d, read %zd bytes", |
049333ce | 1417 | err, len, pnum, offset, read); |
801c135c AB |
1418 | goto error; |
1419 | } | |
1420 | ||
332873d6 | 1421 | err = ubi_check_pattern(buf, 0xFF, len); |
801c135c | 1422 | if (err == 0) { |
32608703 | 1423 | ubi_err(ubi, "flash region at PEB %d:%d, length %d does not contain all 0xFF bytes", |
049333ce | 1424 | pnum, offset, len); |
801c135c AB |
1425 | goto fail; |
1426 | } | |
1427 | ||
332873d6 | 1428 | vfree(buf); |
801c135c AB |
1429 | return 0; |
1430 | ||
1431 | fail: | |
32608703 | 1432 | ubi_err(ubi, "self-check failed for PEB %d", pnum); |
45fc5c81 | 1433 | ubi_msg(ubi, "hex dump of the %d-%d region", offset, offset + len); |
332873d6 | 1434 | print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1, buf, len, 1); |
adbf05e3 | 1435 | err = -EINVAL; |
801c135c | 1436 | error: |
25886a36 | 1437 | dump_stack(); |
332873d6 | 1438 | vfree(buf); |
801c135c AB |
1439 | return err; |
1440 | } |