Commit | Line | Data |
---|---|---|
801c135c AB |
1 | /* |
2 | * Copyright (c) International Business Machines Corp., 2006 | |
3 | * Copyright (c) Nokia Corporation, 2006, 2007 | |
4 | * | |
5 | * This program is free software; you can redistribute it and/or modify | |
6 | * it under the terms of the GNU General Public License as published by | |
7 | * the Free Software Foundation; either version 2 of the License, or | |
8 | * (at your option) any later version. | |
9 | * | |
10 | * This program is distributed in the hope that it will be useful, | |
11 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
12 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See | |
13 | * the GNU General Public License for more details. | |
14 | * | |
15 | * You should have received a copy of the GNU General Public License | |
16 | * along with this program; if not, write to the Free Software | |
17 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
18 | * | |
19 | * Author: Artem Bityutskiy (Битюцкий Артём) | |
20 | */ | |
21 | ||
22 | /* | |
85c6e6e2 | 23 | * UBI input/output sub-system. |
801c135c | 24 | * |
85c6e6e2 AB |
25 | * This sub-system provides a uniform way to work with all kinds of the |
26 | * underlying MTD devices. It also implements handy functions for reading and | |
27 | * writing UBI headers. | |
801c135c AB |
28 | * |
29 | * We are trying to have a paranoid mindset and not to trust to what we read | |
85c6e6e2 AB |
30 | * from the flash media in order to be more secure and robust. So this |
31 | * sub-system validates every single header it reads from the flash media. | |
801c135c AB |
32 | * |
33 | * Some words about how the eraseblock headers are stored. | |
34 | * | |
35 | * The erase counter header is always stored at offset zero. By default, the | |
36 | * VID header is stored after the EC header at the closest aligned offset | |
37 | * (i.e. aligned to the minimum I/O unit size). Data starts next to the VID | |
38 | * header at the closest aligned offset. But this default layout may be | |
39 | * changed. For example, for different reasons (e.g., optimization) UBI may be | |
40 | * asked to put the VID header at further offset, and even at an unaligned | |
41 | * offset. Of course, if the offset of the VID header is unaligned, UBI adds | |
42 | * proper padding in front of it. Data offset may also be changed but it has to | |
43 | * be aligned. | |
44 | * | |
45 | * About minimal I/O units. In general, UBI assumes flash device model where | |
46 | * there is only one minimal I/O unit size. E.g., in case of NOR flash it is 1, | |
47 | * in case of NAND flash it is a NAND page, etc. This is reported by MTD in the | |
48 | * @ubi->mtd->writesize field. But as an exception, UBI admits of using another | |
49 | * (smaller) minimal I/O unit size for EC and VID headers to make it possible | |
50 | * to do different optimizations. | |
51 | * | |
52 | * This is extremely useful in case of NAND flashes which admit of several | |
53 | * write operations to one NAND page. In this case UBI can fit EC and VID | |
54 | * headers at one NAND page. Thus, UBI may use "sub-page" size as the minimal | |
55 | * I/O unit for the headers (the @ubi->hdrs_min_io_size field). But it still | |
56 | * reports NAND page size (@ubi->min_io_size) as a minimal I/O unit for the UBI | |
57 | * users. | |
58 | * | |
59 | * Example: some Samsung NANDs with 2KiB pages allow 4x 512-byte writes, so | |
60 | * although the minimal I/O unit is 2K, UBI uses 512 bytes for EC and VID | |
61 | * headers. | |
62 | * | |
63 | * Q: why not just to treat sub-page as a minimal I/O unit of this flash | |
64 | * device, e.g., make @ubi->min_io_size = 512 in the example above? | |
65 | * | |
66 | * A: because when writing a sub-page, MTD still writes a full 2K page but the | |
be436f62 SK |
67 | * bytes which are not relevant to the sub-page are 0xFF. So, basically, |
68 | * writing 4x512 sub-pages is 4 times slower than writing one 2KiB NAND page. | |
69 | * Thus, we prefer to use sub-pages only for EC and VID headers. | |
801c135c AB |
70 | * |
71 | * As it was noted above, the VID header may start at a non-aligned offset. | |
72 | * For example, in case of a 2KiB page NAND flash with a 512 bytes sub-page, | |
73 | * the VID header may reside at offset 1984 which is the last 64 bytes of the | |
74 | * last sub-page (EC header is always at offset zero). This causes some | |
75 | * difficulties when reading and writing VID headers. | |
76 | * | |
77 | * Suppose we have a 64-byte buffer and we read a VID header at it. We change | |
78 | * the data and want to write this VID header out. As we can only write in | |
79 | * 512-byte chunks, we have to allocate one more buffer and copy our VID header | |
80 | * to offset 448 of this buffer. | |
81 | * | |
85c6e6e2 AB |
82 | * The I/O sub-system does the following trick in order to avoid this extra |
83 | * copy. It always allocates a @ubi->vid_hdr_alsize bytes buffer for the VID | |
84 | * header and returns a pointer to offset @ubi->vid_hdr_shift of this buffer. | |
85 | * When the VID header is being written out, it shifts the VID header pointer | |
86 | * back and writes the whole sub-page. | |
801c135c AB |
87 | */ |
88 | ||
89 | #include <linux/crc32.h> | |
90 | #include <linux/err.h> | |
5a0e3ad6 | 91 | #include <linux/slab.h> |
801c135c AB |
92 | #include "ubi.h" |
93 | ||
94 | #ifdef CONFIG_MTD_UBI_DEBUG_PARANOID | |
95 | static int paranoid_check_not_bad(const struct ubi_device *ubi, int pnum); | |
96 | static int paranoid_check_peb_ec_hdr(const struct ubi_device *ubi, int pnum); | |
97 | static int paranoid_check_ec_hdr(const struct ubi_device *ubi, int pnum, | |
98 | const struct ubi_ec_hdr *ec_hdr); | |
99 | static int paranoid_check_peb_vid_hdr(const struct ubi_device *ubi, int pnum); | |
100 | static int paranoid_check_vid_hdr(const struct ubi_device *ubi, int pnum, | |
101 | const struct ubi_vid_hdr *vid_hdr); | |
801c135c AB |
102 | #else |
103 | #define paranoid_check_not_bad(ubi, pnum) 0 | |
104 | #define paranoid_check_peb_ec_hdr(ubi, pnum) 0 | |
105 | #define paranoid_check_ec_hdr(ubi, pnum, ec_hdr) 0 | |
106 | #define paranoid_check_peb_vid_hdr(ubi, pnum) 0 | |
107 | #define paranoid_check_vid_hdr(ubi, pnum, vid_hdr) 0 | |
801c135c AB |
108 | #endif |
109 | ||
110 | /** | |
111 | * ubi_io_read - read data from a physical eraseblock. | |
112 | * @ubi: UBI device description object | |
113 | * @buf: buffer where to store the read data | |
114 | * @pnum: physical eraseblock number to read from | |
115 | * @offset: offset within the physical eraseblock from where to read | |
116 | * @len: how many bytes to read | |
117 | * | |
118 | * This function reads data from offset @offset of physical eraseblock @pnum | |
119 | * and stores the read data in the @buf buffer. The following return codes are | |
120 | * possible: | |
121 | * | |
122 | * o %0 if all the requested data were successfully read; | |
123 | * o %UBI_IO_BITFLIPS if all the requested data were successfully read, but | |
124 | * correctable bit-flips were detected; this is harmless but may indicate | |
125 | * that this eraseblock may become bad soon (but do not have to); | |
63b6c1ed AB |
126 | * o %-EBADMSG if the MTD subsystem reported about data integrity problems, for |
127 | * example it can be an ECC error in case of NAND; this most probably means | |
128 | * that the data is corrupted; | |
801c135c AB |
129 | * o %-EIO if some I/O error occurred; |
130 | * o other negative error codes in case of other errors. | |
131 | */ | |
132 | int ubi_io_read(const struct ubi_device *ubi, void *buf, int pnum, int offset, | |
133 | int len) | |
134 | { | |
135 | int err, retries = 0; | |
136 | size_t read; | |
137 | loff_t addr; | |
138 | ||
139 | dbg_io("read %d bytes from PEB %d:%d", len, pnum, offset); | |
140 | ||
141 | ubi_assert(pnum >= 0 && pnum < ubi->peb_count); | |
142 | ubi_assert(offset >= 0 && offset + len <= ubi->peb_size); | |
143 | ubi_assert(len > 0); | |
144 | ||
145 | err = paranoid_check_not_bad(ubi, pnum); | |
146 | if (err) | |
adbf05e3 | 147 | return err; |
801c135c AB |
148 | |
149 | addr = (loff_t)pnum * ubi->peb_size + offset; | |
150 | retry: | |
151 | err = ubi->mtd->read(ubi->mtd, addr, len, &read, buf); | |
152 | if (err) { | |
f5d5b1f8 | 153 | const char *errstr = (err == -EBADMSG) ? " (ECC error)" : ""; |
1a49af2c | 154 | |
801c135c AB |
155 | if (err == -EUCLEAN) { |
156 | /* | |
157 | * -EUCLEAN is reported if there was a bit-flip which | |
158 | * was corrected, so this is harmless. | |
8c1e6ee1 AB |
159 | * |
160 | * We do not report about it here unless debugging is | |
161 | * enabled. A corresponding message will be printed | |
162 | * later, when it is has been scrubbed. | |
801c135c | 163 | */ |
8c1e6ee1 | 164 | dbg_msg("fixable bit-flip detected at PEB %d", pnum); |
801c135c AB |
165 | ubi_assert(len == read); |
166 | return UBI_IO_BITFLIPS; | |
167 | } | |
168 | ||
169 | if (read != len && retries++ < UBI_IO_RETRIES) { | |
1a49af2c | 170 | dbg_io("error %d%s while reading %d bytes from PEB %d:%d," |
9c9ec147 | 171 | " read only %zd bytes, retry", |
1a49af2c | 172 | err, errstr, len, pnum, offset, read); |
801c135c AB |
173 | yield(); |
174 | goto retry; | |
175 | } | |
176 | ||
f5d5b1f8 | 177 | ubi_err("error %d%s while reading %d bytes from PEB %d:%d, " |
1a49af2c | 178 | "read %zd bytes", err, errstr, len, pnum, offset, read); |
801c135c | 179 | ubi_dbg_dump_stack(); |
2362a53e AB |
180 | |
181 | /* | |
182 | * The driver should never return -EBADMSG if it failed to read | |
183 | * all the requested data. But some buggy drivers might do | |
184 | * this, so we change it to -EIO. | |
185 | */ | |
186 | if (read != len && err == -EBADMSG) { | |
187 | ubi_assert(0); | |
188 | err = -EIO; | |
189 | } | |
801c135c AB |
190 | } else { |
191 | ubi_assert(len == read); | |
192 | ||
193 | if (ubi_dbg_is_bitflip()) { | |
c8566350 | 194 | dbg_gen("bit-flip (emulated)"); |
801c135c AB |
195 | err = UBI_IO_BITFLIPS; |
196 | } | |
197 | } | |
198 | ||
199 | return err; | |
200 | } | |
201 | ||
202 | /** | |
203 | * ubi_io_write - write data to a physical eraseblock. | |
204 | * @ubi: UBI device description object | |
205 | * @buf: buffer with the data to write | |
206 | * @pnum: physical eraseblock number to write to | |
207 | * @offset: offset within the physical eraseblock where to write | |
208 | * @len: how many bytes to write | |
209 | * | |
210 | * This function writes @len bytes of data from buffer @buf to offset @offset | |
211 | * of physical eraseblock @pnum. If all the data were successfully written, | |
212 | * zero is returned. If an error occurred, this function returns a negative | |
213 | * error code. If %-EIO is returned, the physical eraseblock most probably went | |
214 | * bad. | |
215 | * | |
216 | * Note, in case of an error, it is possible that something was still written | |
217 | * to the flash media, but may be some garbage. | |
218 | */ | |
e88d6e10 AB |
219 | int ubi_io_write(struct ubi_device *ubi, const void *buf, int pnum, int offset, |
220 | int len) | |
801c135c AB |
221 | { |
222 | int err; | |
223 | size_t written; | |
224 | loff_t addr; | |
225 | ||
226 | dbg_io("write %d bytes to PEB %d:%d", len, pnum, offset); | |
227 | ||
228 | ubi_assert(pnum >= 0 && pnum < ubi->peb_count); | |
229 | ubi_assert(offset >= 0 && offset + len <= ubi->peb_size); | |
230 | ubi_assert(offset % ubi->hdrs_min_io_size == 0); | |
231 | ubi_assert(len > 0 && len % ubi->hdrs_min_io_size == 0); | |
232 | ||
233 | if (ubi->ro_mode) { | |
234 | ubi_err("read-only mode"); | |
235 | return -EROFS; | |
236 | } | |
237 | ||
238 | /* The below has to be compiled out if paranoid checks are disabled */ | |
239 | ||
240 | err = paranoid_check_not_bad(ubi, pnum); | |
241 | if (err) | |
adbf05e3 | 242 | return err; |
801c135c AB |
243 | |
244 | /* The area we are writing to has to contain all 0xFF bytes */ | |
40a71a87 | 245 | err = ubi_dbg_check_all_ff(ubi, pnum, offset, len); |
801c135c | 246 | if (err) |
adbf05e3 | 247 | return err; |
801c135c AB |
248 | |
249 | if (offset >= ubi->leb_start) { | |
250 | /* | |
251 | * We write to the data area of the physical eraseblock. Make | |
252 | * sure it has valid EC and VID headers. | |
253 | */ | |
254 | err = paranoid_check_peb_ec_hdr(ubi, pnum); | |
255 | if (err) | |
adbf05e3 | 256 | return err; |
801c135c AB |
257 | err = paranoid_check_peb_vid_hdr(ubi, pnum); |
258 | if (err) | |
adbf05e3 | 259 | return err; |
801c135c AB |
260 | } |
261 | ||
262 | if (ubi_dbg_is_write_failure()) { | |
263 | dbg_err("cannot write %d bytes to PEB %d:%d " | |
264 | "(emulated)", len, pnum, offset); | |
265 | ubi_dbg_dump_stack(); | |
266 | return -EIO; | |
267 | } | |
268 | ||
269 | addr = (loff_t)pnum * ubi->peb_size + offset; | |
270 | err = ubi->mtd->write(ubi->mtd, addr, len, &written, buf); | |
271 | if (err) { | |
ebf53f42 AB |
272 | ubi_err("error %d while writing %d bytes to PEB %d:%d, written " |
273 | "%zd bytes", err, len, pnum, offset, written); | |
801c135c | 274 | ubi_dbg_dump_stack(); |
867996b1 | 275 | ubi_dbg_dump_flash(ubi, pnum, offset, len); |
801c135c AB |
276 | } else |
277 | ubi_assert(written == len); | |
278 | ||
6e9065d7 AB |
279 | if (!err) { |
280 | err = ubi_dbg_check_write(ubi, buf, pnum, offset, len); | |
281 | if (err) | |
282 | return err; | |
283 | ||
284 | /* | |
285 | * Since we always write sequentially, the rest of the PEB has | |
286 | * to contain only 0xFF bytes. | |
287 | */ | |
288 | offset += len; | |
289 | len = ubi->peb_size - offset; | |
290 | if (len) | |
291 | err = ubi_dbg_check_all_ff(ubi, pnum, offset, len); | |
292 | } | |
293 | ||
801c135c AB |
294 | return err; |
295 | } | |
296 | ||
297 | /** | |
298 | * erase_callback - MTD erasure call-back. | |
299 | * @ei: MTD erase information object. | |
300 | * | |
301 | * Note, even though MTD erase interface is asynchronous, all the current | |
302 | * implementations are synchronous anyway. | |
303 | */ | |
304 | static void erase_callback(struct erase_info *ei) | |
305 | { | |
306 | wake_up_interruptible((wait_queue_head_t *)ei->priv); | |
307 | } | |
308 | ||
309 | /** | |
310 | * do_sync_erase - synchronously erase a physical eraseblock. | |
311 | * @ubi: UBI device description object | |
312 | * @pnum: the physical eraseblock number to erase | |
313 | * | |
314 | * This function synchronously erases physical eraseblock @pnum and returns | |
315 | * zero in case of success and a negative error code in case of failure. If | |
316 | * %-EIO is returned, the physical eraseblock most probably went bad. | |
317 | */ | |
e88d6e10 | 318 | static int do_sync_erase(struct ubi_device *ubi, int pnum) |
801c135c AB |
319 | { |
320 | int err, retries = 0; | |
321 | struct erase_info ei; | |
322 | wait_queue_head_t wq; | |
323 | ||
324 | dbg_io("erase PEB %d", pnum); | |
325 | ||
326 | retry: | |
327 | init_waitqueue_head(&wq); | |
328 | memset(&ei, 0, sizeof(struct erase_info)); | |
329 | ||
330 | ei.mtd = ubi->mtd; | |
2f176f79 | 331 | ei.addr = (loff_t)pnum * ubi->peb_size; |
801c135c AB |
332 | ei.len = ubi->peb_size; |
333 | ei.callback = erase_callback; | |
334 | ei.priv = (unsigned long)&wq; | |
335 | ||
336 | err = ubi->mtd->erase(ubi->mtd, &ei); | |
337 | if (err) { | |
338 | if (retries++ < UBI_IO_RETRIES) { | |
339 | dbg_io("error %d while erasing PEB %d, retry", | |
340 | err, pnum); | |
341 | yield(); | |
342 | goto retry; | |
343 | } | |
344 | ubi_err("cannot erase PEB %d, error %d", pnum, err); | |
345 | ubi_dbg_dump_stack(); | |
346 | return err; | |
347 | } | |
348 | ||
349 | err = wait_event_interruptible(wq, ei.state == MTD_ERASE_DONE || | |
350 | ei.state == MTD_ERASE_FAILED); | |
351 | if (err) { | |
352 | ubi_err("interrupted PEB %d erasure", pnum); | |
353 | return -EINTR; | |
354 | } | |
355 | ||
356 | if (ei.state == MTD_ERASE_FAILED) { | |
357 | if (retries++ < UBI_IO_RETRIES) { | |
358 | dbg_io("error while erasing PEB %d, retry", pnum); | |
359 | yield(); | |
360 | goto retry; | |
361 | } | |
362 | ubi_err("cannot erase PEB %d", pnum); | |
363 | ubi_dbg_dump_stack(); | |
364 | return -EIO; | |
365 | } | |
366 | ||
40a71a87 | 367 | err = ubi_dbg_check_all_ff(ubi, pnum, 0, ubi->peb_size); |
801c135c | 368 | if (err) |
adbf05e3 | 369 | return err; |
801c135c AB |
370 | |
371 | if (ubi_dbg_is_erase_failure() && !err) { | |
372 | dbg_err("cannot erase PEB %d (emulated)", pnum); | |
373 | return -EIO; | |
374 | } | |
375 | ||
376 | return 0; | |
377 | } | |
378 | ||
379 | /** | |
380 | * check_pattern - check if buffer contains only a certain byte pattern. | |
381 | * @buf: buffer to check | |
382 | * @patt: the pattern to check | |
383 | * @size: buffer size in bytes | |
384 | * | |
385 | * This function returns %1 in there are only @patt bytes in @buf, and %0 if | |
386 | * something else was also found. | |
387 | */ | |
388 | static int check_pattern(const void *buf, uint8_t patt, int size) | |
389 | { | |
390 | int i; | |
391 | ||
392 | for (i = 0; i < size; i++) | |
393 | if (((const uint8_t *)buf)[i] != patt) | |
394 | return 0; | |
395 | return 1; | |
396 | } | |
397 | ||
398 | /* Patterns to write to a physical eraseblock when torturing it */ | |
399 | static uint8_t patterns[] = {0xa5, 0x5a, 0x0}; | |
400 | ||
401 | /** | |
402 | * torture_peb - test a supposedly bad physical eraseblock. | |
403 | * @ubi: UBI device description object | |
404 | * @pnum: the physical eraseblock number to test | |
405 | * | |
406 | * This function returns %-EIO if the physical eraseblock did not pass the | |
407 | * test, a positive number of erase operations done if the test was | |
408 | * successfully passed, and other negative error codes in case of other errors. | |
409 | */ | |
e88d6e10 | 410 | static int torture_peb(struct ubi_device *ubi, int pnum) |
801c135c | 411 | { |
801c135c AB |
412 | int err, i, patt_count; |
413 | ||
8c1e6ee1 | 414 | ubi_msg("run torture test for PEB %d", pnum); |
801c135c AB |
415 | patt_count = ARRAY_SIZE(patterns); |
416 | ubi_assert(patt_count > 0); | |
417 | ||
e88d6e10 | 418 | mutex_lock(&ubi->buf_mutex); |
801c135c AB |
419 | for (i = 0; i < patt_count; i++) { |
420 | err = do_sync_erase(ubi, pnum); | |
421 | if (err) | |
422 | goto out; | |
423 | ||
424 | /* Make sure the PEB contains only 0xFF bytes */ | |
e88d6e10 | 425 | err = ubi_io_read(ubi, ubi->peb_buf1, pnum, 0, ubi->peb_size); |
801c135c AB |
426 | if (err) |
427 | goto out; | |
428 | ||
e88d6e10 | 429 | err = check_pattern(ubi->peb_buf1, 0xFF, ubi->peb_size); |
801c135c AB |
430 | if (err == 0) { |
431 | ubi_err("erased PEB %d, but a non-0xFF byte found", | |
432 | pnum); | |
433 | err = -EIO; | |
434 | goto out; | |
435 | } | |
436 | ||
437 | /* Write a pattern and check it */ | |
e88d6e10 AB |
438 | memset(ubi->peb_buf1, patterns[i], ubi->peb_size); |
439 | err = ubi_io_write(ubi, ubi->peb_buf1, pnum, 0, ubi->peb_size); | |
801c135c AB |
440 | if (err) |
441 | goto out; | |
442 | ||
e88d6e10 AB |
443 | memset(ubi->peb_buf1, ~patterns[i], ubi->peb_size); |
444 | err = ubi_io_read(ubi, ubi->peb_buf1, pnum, 0, ubi->peb_size); | |
801c135c AB |
445 | if (err) |
446 | goto out; | |
447 | ||
e88d6e10 | 448 | err = check_pattern(ubi->peb_buf1, patterns[i], ubi->peb_size); |
801c135c AB |
449 | if (err == 0) { |
450 | ubi_err("pattern %x checking failed for PEB %d", | |
451 | patterns[i], pnum); | |
452 | err = -EIO; | |
453 | goto out; | |
454 | } | |
455 | } | |
456 | ||
457 | err = patt_count; | |
8c1e6ee1 | 458 | ubi_msg("PEB %d passed torture test, do not mark it a bad", pnum); |
801c135c AB |
459 | |
460 | out: | |
e88d6e10 | 461 | mutex_unlock(&ubi->buf_mutex); |
8d2d4011 | 462 | if (err == UBI_IO_BITFLIPS || err == -EBADMSG) { |
801c135c AB |
463 | /* |
464 | * If a bit-flip or data integrity error was detected, the test | |
465 | * has not passed because it happened on a freshly erased | |
466 | * physical eraseblock which means something is wrong with it. | |
467 | */ | |
8d2d4011 AB |
468 | ubi_err("read problems on freshly erased PEB %d, must be bad", |
469 | pnum); | |
801c135c | 470 | err = -EIO; |
8d2d4011 | 471 | } |
801c135c AB |
472 | return err; |
473 | } | |
474 | ||
ebf53f42 AB |
475 | /** |
476 | * nor_erase_prepare - prepare a NOR flash PEB for erasure. | |
477 | * @ubi: UBI device description object | |
478 | * @pnum: physical eraseblock number to prepare | |
479 | * | |
480 | * NOR flash, or at least some of them, have peculiar embedded PEB erasure | |
481 | * algorithm: the PEB is first filled with zeroes, then it is erased. And | |
482 | * filling with zeroes starts from the end of the PEB. This was observed with | |
483 | * Spansion S29GL512N NOR flash. | |
484 | * | |
485 | * This means that in case of a power cut we may end up with intact data at the | |
486 | * beginning of the PEB, and all zeroes at the end of PEB. In other words, the | |
487 | * EC and VID headers are OK, but a large chunk of data at the end of PEB is | |
488 | * zeroed. This makes UBI mistakenly treat this PEB as used and associate it | |
489 | * with an LEB, which leads to subsequent failures (e.g., UBIFS fails). | |
490 | * | |
491 | * This function is called before erasing NOR PEBs and it zeroes out EC and VID | |
492 | * magic numbers in order to invalidate them and prevent the failures. Returns | |
493 | * zero in case of success and a negative error code in case of failure. | |
494 | */ | |
495 | static int nor_erase_prepare(struct ubi_device *ubi, int pnum) | |
496 | { | |
de75c771 | 497 | int err, err1; |
ebf53f42 AB |
498 | size_t written; |
499 | loff_t addr; | |
500 | uint32_t data = 0; | |
de75c771 | 501 | struct ubi_vid_hdr vid_hdr; |
ebf53f42 | 502 | |
5b289b56 | 503 | addr = (loff_t)pnum * ubi->peb_size + ubi->vid_hdr_aloffset; |
83c2099f | 504 | err = ubi->mtd->write(ubi->mtd, addr, 4, &written, (void *)&data); |
de75c771 AB |
505 | if (!err) { |
506 | addr -= ubi->vid_hdr_aloffset; | |
507 | err = ubi->mtd->write(ubi->mtd, addr, 4, &written, | |
508 | (void *)&data); | |
509 | if (!err) | |
510 | return 0; | |
ebf53f42 AB |
511 | } |
512 | ||
de75c771 AB |
513 | /* |
514 | * We failed to write to the media. This was observed with Spansion | |
515 | * S29GL512N NOR flash. Most probably the eraseblock erasure was | |
516 | * interrupted at a very inappropriate moment, so it became unwritable. | |
517 | * In this case we probably anyway have garbage in this PEB. | |
518 | */ | |
519 | err1 = ubi_io_read_vid_hdr(ubi, pnum, &vid_hdr, 0); | |
756e1df1 | 520 | if (err1 == UBI_IO_BAD_HDR_EBADMSG || err1 == UBI_IO_BAD_HDR) |
de75c771 AB |
521 | /* |
522 | * The VID header is corrupted, so we can safely erase this | |
523 | * PEB and not afraid that it will be treated as a valid PEB in | |
524 | * case of an unclean reboot. | |
525 | */ | |
526 | return 0; | |
527 | ||
528 | /* | |
529 | * The PEB contains a valid VID header, but we cannot invalidate it. | |
530 | * Supposedly the flash media or the driver is screwed up, so return an | |
531 | * error. | |
532 | */ | |
533 | ubi_err("cannot invalidate PEB %d, write returned %d read returned %d", | |
534 | pnum, err, err1); | |
535 | ubi_dbg_dump_flash(ubi, pnum, 0, ubi->peb_size); | |
536 | return -EIO; | |
ebf53f42 AB |
537 | } |
538 | ||
801c135c AB |
539 | /** |
540 | * ubi_io_sync_erase - synchronously erase a physical eraseblock. | |
541 | * @ubi: UBI device description object | |
542 | * @pnum: physical eraseblock number to erase | |
543 | * @torture: if this physical eraseblock has to be tortured | |
544 | * | |
545 | * This function synchronously erases physical eraseblock @pnum. If @torture | |
546 | * flag is not zero, the physical eraseblock is checked by means of writing | |
547 | * different patterns to it and reading them back. If the torturing is enabled, | |
025dfdaf | 548 | * the physical eraseblock is erased more than once. |
801c135c AB |
549 | * |
550 | * This function returns the number of erasures made in case of success, %-EIO | |
551 | * if the erasure failed or the torturing test failed, and other negative error | |
552 | * codes in case of other errors. Note, %-EIO means that the physical | |
553 | * eraseblock is bad. | |
554 | */ | |
e88d6e10 | 555 | int ubi_io_sync_erase(struct ubi_device *ubi, int pnum, int torture) |
801c135c AB |
556 | { |
557 | int err, ret = 0; | |
558 | ||
559 | ubi_assert(pnum >= 0 && pnum < ubi->peb_count); | |
560 | ||
561 | err = paranoid_check_not_bad(ubi, pnum); | |
562 | if (err != 0) | |
adbf05e3 | 563 | return err; |
801c135c AB |
564 | |
565 | if (ubi->ro_mode) { | |
566 | ubi_err("read-only mode"); | |
567 | return -EROFS; | |
568 | } | |
569 | ||
ebf53f42 AB |
570 | if (ubi->nor_flash) { |
571 | err = nor_erase_prepare(ubi, pnum); | |
572 | if (err) | |
573 | return err; | |
574 | } | |
575 | ||
801c135c AB |
576 | if (torture) { |
577 | ret = torture_peb(ubi, pnum); | |
578 | if (ret < 0) | |
579 | return ret; | |
580 | } | |
581 | ||
582 | err = do_sync_erase(ubi, pnum); | |
583 | if (err) | |
584 | return err; | |
585 | ||
586 | return ret + 1; | |
587 | } | |
588 | ||
589 | /** | |
590 | * ubi_io_is_bad - check if a physical eraseblock is bad. | |
591 | * @ubi: UBI device description object | |
592 | * @pnum: the physical eraseblock number to check | |
593 | * | |
594 | * This function returns a positive number if the physical eraseblock is bad, | |
595 | * zero if not, and a negative error code if an error occurred. | |
596 | */ | |
597 | int ubi_io_is_bad(const struct ubi_device *ubi, int pnum) | |
598 | { | |
599 | struct mtd_info *mtd = ubi->mtd; | |
600 | ||
601 | ubi_assert(pnum >= 0 && pnum < ubi->peb_count); | |
602 | ||
603 | if (ubi->bad_allowed) { | |
604 | int ret; | |
605 | ||
606 | ret = mtd->block_isbad(mtd, (loff_t)pnum * ubi->peb_size); | |
607 | if (ret < 0) | |
608 | ubi_err("error %d while checking if PEB %d is bad", | |
609 | ret, pnum); | |
610 | else if (ret) | |
611 | dbg_io("PEB %d is bad", pnum); | |
612 | return ret; | |
613 | } | |
614 | ||
615 | return 0; | |
616 | } | |
617 | ||
618 | /** | |
619 | * ubi_io_mark_bad - mark a physical eraseblock as bad. | |
620 | * @ubi: UBI device description object | |
621 | * @pnum: the physical eraseblock number to mark | |
622 | * | |
623 | * This function returns zero in case of success and a negative error code in | |
624 | * case of failure. | |
625 | */ | |
626 | int ubi_io_mark_bad(const struct ubi_device *ubi, int pnum) | |
627 | { | |
628 | int err; | |
629 | struct mtd_info *mtd = ubi->mtd; | |
630 | ||
631 | ubi_assert(pnum >= 0 && pnum < ubi->peb_count); | |
632 | ||
633 | if (ubi->ro_mode) { | |
634 | ubi_err("read-only mode"); | |
635 | return -EROFS; | |
636 | } | |
637 | ||
638 | if (!ubi->bad_allowed) | |
639 | return 0; | |
640 | ||
641 | err = mtd->block_markbad(mtd, (loff_t)pnum * ubi->peb_size); | |
642 | if (err) | |
643 | ubi_err("cannot mark PEB %d bad, error %d", pnum, err); | |
644 | return err; | |
645 | } | |
646 | ||
647 | /** | |
648 | * validate_ec_hdr - validate an erase counter header. | |
649 | * @ubi: UBI device description object | |
650 | * @ec_hdr: the erase counter header to check | |
651 | * | |
652 | * This function returns zero if the erase counter header is OK, and %1 if | |
653 | * not. | |
654 | */ | |
fe96efc1 | 655 | static int validate_ec_hdr(const struct ubi_device *ubi, |
801c135c AB |
656 | const struct ubi_ec_hdr *ec_hdr) |
657 | { | |
658 | long long ec; | |
fe96efc1 | 659 | int vid_hdr_offset, leb_start; |
801c135c | 660 | |
3261ebd7 CH |
661 | ec = be64_to_cpu(ec_hdr->ec); |
662 | vid_hdr_offset = be32_to_cpu(ec_hdr->vid_hdr_offset); | |
663 | leb_start = be32_to_cpu(ec_hdr->data_offset); | |
801c135c AB |
664 | |
665 | if (ec_hdr->version != UBI_VERSION) { | |
666 | ubi_err("node with incompatible UBI version found: " | |
667 | "this UBI version is %d, image version is %d", | |
668 | UBI_VERSION, (int)ec_hdr->version); | |
669 | goto bad; | |
670 | } | |
671 | ||
672 | if (vid_hdr_offset != ubi->vid_hdr_offset) { | |
673 | ubi_err("bad VID header offset %d, expected %d", | |
674 | vid_hdr_offset, ubi->vid_hdr_offset); | |
675 | goto bad; | |
676 | } | |
677 | ||
678 | if (leb_start != ubi->leb_start) { | |
679 | ubi_err("bad data offset %d, expected %d", | |
680 | leb_start, ubi->leb_start); | |
681 | goto bad; | |
682 | } | |
683 | ||
684 | if (ec < 0 || ec > UBI_MAX_ERASECOUNTER) { | |
685 | ubi_err("bad erase counter %lld", ec); | |
686 | goto bad; | |
687 | } | |
688 | ||
689 | return 0; | |
690 | ||
691 | bad: | |
692 | ubi_err("bad EC header"); | |
693 | ubi_dbg_dump_ec_hdr(ec_hdr); | |
694 | ubi_dbg_dump_stack(); | |
695 | return 1; | |
696 | } | |
697 | ||
698 | /** | |
699 | * ubi_io_read_ec_hdr - read and check an erase counter header. | |
700 | * @ubi: UBI device description object | |
701 | * @pnum: physical eraseblock to read from | |
702 | * @ec_hdr: a &struct ubi_ec_hdr object where to store the read erase counter | |
703 | * header | |
704 | * @verbose: be verbose if the header is corrupted or was not found | |
705 | * | |
706 | * This function reads erase counter header from physical eraseblock @pnum and | |
707 | * stores it in @ec_hdr. This function also checks CRC checksum of the read | |
708 | * erase counter header. The following codes may be returned: | |
709 | * | |
710 | * o %0 if the CRC checksum is correct and the header was successfully read; | |
711 | * o %UBI_IO_BITFLIPS if the CRC is correct, but bit-flips were detected | |
712 | * and corrected by the flash driver; this is harmless but may indicate that | |
713 | * this eraseblock may become bad soon (but may be not); | |
786d7831 | 714 | * o %UBI_IO_BAD_HDR if the erase counter header is corrupted (a CRC error); |
756e1df1 AB |
715 | * o %UBI_IO_BAD_HDR_EBADMSG is the same as %UBI_IO_BAD_HDR, but there also was |
716 | * a data integrity error (uncorrectable ECC error in case of NAND); | |
801c135c AB |
717 | * o %UBI_IO_PEB_EMPTY if the physical eraseblock is empty; |
718 | * o a negative error code in case of failure. | |
719 | */ | |
e88d6e10 | 720 | int ubi_io_read_ec_hdr(struct ubi_device *ubi, int pnum, |
801c135c AB |
721 | struct ubi_ec_hdr *ec_hdr, int verbose) |
722 | { | |
723 | int err, read_err = 0; | |
724 | uint32_t crc, magic, hdr_crc; | |
725 | ||
726 | dbg_io("read EC header from PEB %d", pnum); | |
727 | ubi_assert(pnum >= 0 && pnum < ubi->peb_count); | |
728 | ||
729 | err = ubi_io_read(ubi, ec_hdr, pnum, 0, UBI_EC_HDR_SIZE); | |
730 | if (err) { | |
731 | if (err != UBI_IO_BITFLIPS && err != -EBADMSG) | |
732 | return err; | |
733 | ||
734 | /* | |
735 | * We read all the data, but either a correctable bit-flip | |
756e1df1 AB |
736 | * occurred, or MTD reported a data integrity error |
737 | * (uncorrectable ECC error in case of NAND). The former is | |
738 | * harmless, the later may mean that the read data is | |
739 | * corrupted. But we have a CRC check-sum and we will detect | |
740 | * this. If the EC header is still OK, we just report this as | |
741 | * there was a bit-flip, to force scrubbing. | |
801c135c | 742 | */ |
eb89580e | 743 | if (err == -EBADMSG) |
756e1df1 | 744 | read_err = UBI_IO_BAD_HDR_EBADMSG; |
801c135c AB |
745 | } |
746 | ||
3261ebd7 | 747 | magic = be32_to_cpu(ec_hdr->magic); |
801c135c | 748 | if (magic != UBI_EC_HDR_MAGIC) { |
eb89580e AB |
749 | if (read_err) |
750 | return read_err; | |
751 | ||
801c135c AB |
752 | /* |
753 | * The magic field is wrong. Let's check if we have read all | |
754 | * 0xFF. If yes, this physical eraseblock is assumed to be | |
755 | * empty. | |
801c135c | 756 | */ |
eb89580e | 757 | if (check_pattern(ec_hdr, 0xFF, UBI_EC_HDR_SIZE)) { |
801c135c | 758 | /* The physical eraseblock is supposedly empty */ |
801c135c AB |
759 | if (verbose) |
760 | ubi_warn("no EC header found at PEB %d, " | |
761 | "only 0xFF bytes", pnum); | |
ed45819f AB |
762 | else if (UBI_IO_DEBUG) |
763 | dbg_msg("no EC header found at PEB %d, " | |
764 | "only 0xFF bytes", pnum); | |
801c135c AB |
765 | return UBI_IO_PEB_EMPTY; |
766 | } | |
767 | ||
768 | /* | |
769 | * This is not a valid erase counter header, and these are not | |
770 | * 0xFF bytes. Report that the header is corrupted. | |
771 | */ | |
772 | if (verbose) { | |
773 | ubi_warn("bad magic number at PEB %d: %08x instead of " | |
774 | "%08x", pnum, magic, UBI_EC_HDR_MAGIC); | |
775 | ubi_dbg_dump_ec_hdr(ec_hdr); | |
ed45819f AB |
776 | } else if (UBI_IO_DEBUG) |
777 | dbg_msg("bad magic number at PEB %d: %08x instead of " | |
778 | "%08x", pnum, magic, UBI_EC_HDR_MAGIC); | |
786d7831 | 779 | return UBI_IO_BAD_HDR; |
801c135c AB |
780 | } |
781 | ||
782 | crc = crc32(UBI_CRC32_INIT, ec_hdr, UBI_EC_HDR_SIZE_CRC); | |
3261ebd7 | 783 | hdr_crc = be32_to_cpu(ec_hdr->hdr_crc); |
801c135c AB |
784 | |
785 | if (hdr_crc != crc) { | |
786 | if (verbose) { | |
9c9ec147 AB |
787 | ubi_warn("bad EC header CRC at PEB %d, calculated " |
788 | "%#08x, read %#08x", pnum, crc, hdr_crc); | |
801c135c | 789 | ubi_dbg_dump_ec_hdr(ec_hdr); |
ed45819f AB |
790 | } else if (UBI_IO_DEBUG) |
791 | dbg_msg("bad EC header CRC at PEB %d, calculated " | |
792 | "%#08x, read %#08x", pnum, crc, hdr_crc); | |
eb89580e | 793 | return read_err ?: UBI_IO_BAD_HDR; |
801c135c AB |
794 | } |
795 | ||
796 | /* And of course validate what has just been read from the media */ | |
797 | err = validate_ec_hdr(ubi, ec_hdr); | |
798 | if (err) { | |
799 | ubi_err("validation failed for PEB %d", pnum); | |
800 | return -EINVAL; | |
801 | } | |
802 | ||
eb89580e AB |
803 | /* |
804 | * If there was %-EBADMSG, but the header CRC is still OK, report about | |
805 | * a bit-flip to force scrubbing on this PEB. | |
806 | */ | |
801c135c AB |
807 | return read_err ? UBI_IO_BITFLIPS : 0; |
808 | } | |
809 | ||
810 | /** | |
811 | * ubi_io_write_ec_hdr - write an erase counter header. | |
812 | * @ubi: UBI device description object | |
813 | * @pnum: physical eraseblock to write to | |
814 | * @ec_hdr: the erase counter header to write | |
815 | * | |
816 | * This function writes erase counter header described by @ec_hdr to physical | |
817 | * eraseblock @pnum. It also fills most fields of @ec_hdr before writing, so | |
818 | * the caller do not have to fill them. Callers must only fill the @ec_hdr->ec | |
819 | * field. | |
820 | * | |
821 | * This function returns zero in case of success and a negative error code in | |
822 | * case of failure. If %-EIO is returned, the physical eraseblock most probably | |
823 | * went bad. | |
824 | */ | |
e88d6e10 | 825 | int ubi_io_write_ec_hdr(struct ubi_device *ubi, int pnum, |
801c135c AB |
826 | struct ubi_ec_hdr *ec_hdr) |
827 | { | |
828 | int err; | |
829 | uint32_t crc; | |
830 | ||
831 | dbg_io("write EC header to PEB %d", pnum); | |
832 | ubi_assert(pnum >= 0 && pnum < ubi->peb_count); | |
833 | ||
3261ebd7 | 834 | ec_hdr->magic = cpu_to_be32(UBI_EC_HDR_MAGIC); |
801c135c | 835 | ec_hdr->version = UBI_VERSION; |
3261ebd7 CH |
836 | ec_hdr->vid_hdr_offset = cpu_to_be32(ubi->vid_hdr_offset); |
837 | ec_hdr->data_offset = cpu_to_be32(ubi->leb_start); | |
0c6c7fa1 | 838 | ec_hdr->image_seq = cpu_to_be32(ubi->image_seq); |
801c135c | 839 | crc = crc32(UBI_CRC32_INIT, ec_hdr, UBI_EC_HDR_SIZE_CRC); |
3261ebd7 | 840 | ec_hdr->hdr_crc = cpu_to_be32(crc); |
801c135c AB |
841 | |
842 | err = paranoid_check_ec_hdr(ubi, pnum, ec_hdr); | |
843 | if (err) | |
adbf05e3 | 844 | return err; |
801c135c AB |
845 | |
846 | err = ubi_io_write(ubi, ec_hdr, pnum, 0, ubi->ec_hdr_alsize); | |
847 | return err; | |
848 | } | |
849 | ||
850 | /** | |
851 | * validate_vid_hdr - validate a volume identifier header. | |
852 | * @ubi: UBI device description object | |
853 | * @vid_hdr: the volume identifier header to check | |
854 | * | |
855 | * This function checks that data stored in the volume identifier header | |
856 | * @vid_hdr. Returns zero if the VID header is OK and %1 if not. | |
857 | */ | |
858 | static int validate_vid_hdr(const struct ubi_device *ubi, | |
859 | const struct ubi_vid_hdr *vid_hdr) | |
860 | { | |
861 | int vol_type = vid_hdr->vol_type; | |
862 | int copy_flag = vid_hdr->copy_flag; | |
3261ebd7 CH |
863 | int vol_id = be32_to_cpu(vid_hdr->vol_id); |
864 | int lnum = be32_to_cpu(vid_hdr->lnum); | |
801c135c | 865 | int compat = vid_hdr->compat; |
3261ebd7 CH |
866 | int data_size = be32_to_cpu(vid_hdr->data_size); |
867 | int used_ebs = be32_to_cpu(vid_hdr->used_ebs); | |
868 | int data_pad = be32_to_cpu(vid_hdr->data_pad); | |
869 | int data_crc = be32_to_cpu(vid_hdr->data_crc); | |
801c135c AB |
870 | int usable_leb_size = ubi->leb_size - data_pad; |
871 | ||
872 | if (copy_flag != 0 && copy_flag != 1) { | |
873 | dbg_err("bad copy_flag"); | |
874 | goto bad; | |
875 | } | |
876 | ||
877 | if (vol_id < 0 || lnum < 0 || data_size < 0 || used_ebs < 0 || | |
878 | data_pad < 0) { | |
879 | dbg_err("negative values"); | |
880 | goto bad; | |
881 | } | |
882 | ||
883 | if (vol_id >= UBI_MAX_VOLUMES && vol_id < UBI_INTERNAL_VOL_START) { | |
884 | dbg_err("bad vol_id"); | |
885 | goto bad; | |
886 | } | |
887 | ||
888 | if (vol_id < UBI_INTERNAL_VOL_START && compat != 0) { | |
889 | dbg_err("bad compat"); | |
890 | goto bad; | |
891 | } | |
892 | ||
893 | if (vol_id >= UBI_INTERNAL_VOL_START && compat != UBI_COMPAT_DELETE && | |
894 | compat != UBI_COMPAT_RO && compat != UBI_COMPAT_PRESERVE && | |
895 | compat != UBI_COMPAT_REJECT) { | |
896 | dbg_err("bad compat"); | |
897 | goto bad; | |
898 | } | |
899 | ||
900 | if (vol_type != UBI_VID_DYNAMIC && vol_type != UBI_VID_STATIC) { | |
901 | dbg_err("bad vol_type"); | |
902 | goto bad; | |
903 | } | |
904 | ||
905 | if (data_pad >= ubi->leb_size / 2) { | |
906 | dbg_err("bad data_pad"); | |
907 | goto bad; | |
908 | } | |
909 | ||
910 | if (vol_type == UBI_VID_STATIC) { | |
911 | /* | |
912 | * Although from high-level point of view static volumes may | |
913 | * contain zero bytes of data, but no VID headers can contain | |
914 | * zero at these fields, because they empty volumes do not have | |
915 | * mapped logical eraseblocks. | |
916 | */ | |
917 | if (used_ebs == 0) { | |
918 | dbg_err("zero used_ebs"); | |
919 | goto bad; | |
920 | } | |
921 | if (data_size == 0) { | |
922 | dbg_err("zero data_size"); | |
923 | goto bad; | |
924 | } | |
925 | if (lnum < used_ebs - 1) { | |
926 | if (data_size != usable_leb_size) { | |
927 | dbg_err("bad data_size"); | |
928 | goto bad; | |
929 | } | |
930 | } else if (lnum == used_ebs - 1) { | |
931 | if (data_size == 0) { | |
932 | dbg_err("bad data_size at last LEB"); | |
933 | goto bad; | |
934 | } | |
935 | } else { | |
936 | dbg_err("too high lnum"); | |
937 | goto bad; | |
938 | } | |
939 | } else { | |
940 | if (copy_flag == 0) { | |
941 | if (data_crc != 0) { | |
942 | dbg_err("non-zero data CRC"); | |
943 | goto bad; | |
944 | } | |
945 | if (data_size != 0) { | |
946 | dbg_err("non-zero data_size"); | |
947 | goto bad; | |
948 | } | |
949 | } else { | |
950 | if (data_size == 0) { | |
951 | dbg_err("zero data_size of copy"); | |
952 | goto bad; | |
953 | } | |
954 | } | |
955 | if (used_ebs != 0) { | |
956 | dbg_err("bad used_ebs"); | |
957 | goto bad; | |
958 | } | |
959 | } | |
960 | ||
961 | return 0; | |
962 | ||
963 | bad: | |
964 | ubi_err("bad VID header"); | |
965 | ubi_dbg_dump_vid_hdr(vid_hdr); | |
966 | ubi_dbg_dump_stack(); | |
967 | return 1; | |
968 | } | |
969 | ||
970 | /** | |
971 | * ubi_io_read_vid_hdr - read and check a volume identifier header. | |
972 | * @ubi: UBI device description object | |
973 | * @pnum: physical eraseblock number to read from | |
974 | * @vid_hdr: &struct ubi_vid_hdr object where to store the read volume | |
975 | * identifier header | |
976 | * @verbose: be verbose if the header is corrupted or wasn't found | |
977 | * | |
978 | * This function reads the volume identifier header from physical eraseblock | |
979 | * @pnum and stores it in @vid_hdr. It also checks CRC checksum of the read | |
980 | * volume identifier header. The following codes may be returned: | |
981 | * | |
982 | * o %0 if the CRC checksum is correct and the header was successfully read; | |
983 | * o %UBI_IO_BITFLIPS if the CRC is correct, but bit-flips were detected | |
984 | * and corrected by the flash driver; this is harmless but may indicate that | |
985 | * this eraseblock may become bad soon; | |
786d7831 | 986 | * o %UBI_IO_BAD_HDR if the volume identifier header is corrupted (a CRC |
801c135c | 987 | * error detected); |
756e1df1 AB |
988 | * o %UBI_IO_BAD_HDR_EBADMSG is the same as %UBI_IO_BAD_HDR, but there also was |
989 | * a data integrity error (uncorrectable ECC error in case of NAND); | |
801c135c AB |
990 | * o %UBI_IO_PEB_FREE if the physical eraseblock is free (i.e., there is no VID |
991 | * header there); | |
992 | * o a negative error code in case of failure. | |
993 | */ | |
e88d6e10 | 994 | int ubi_io_read_vid_hdr(struct ubi_device *ubi, int pnum, |
801c135c AB |
995 | struct ubi_vid_hdr *vid_hdr, int verbose) |
996 | { | |
997 | int err, read_err = 0; | |
998 | uint32_t crc, magic, hdr_crc; | |
999 | void *p; | |
1000 | ||
1001 | dbg_io("read VID header from PEB %d", pnum); | |
1002 | ubi_assert(pnum >= 0 && pnum < ubi->peb_count); | |
1003 | ||
1004 | p = (char *)vid_hdr - ubi->vid_hdr_shift; | |
1005 | err = ubi_io_read(ubi, p, pnum, ubi->vid_hdr_aloffset, | |
1006 | ubi->vid_hdr_alsize); | |
1007 | if (err) { | |
1008 | if (err != UBI_IO_BITFLIPS && err != -EBADMSG) | |
1009 | return err; | |
1010 | ||
1011 | /* | |
1012 | * We read all the data, but either a correctable bit-flip | |
756e1df1 AB |
1013 | * occurred, or MTD reported a data integrity error |
1014 | * (uncorrectable ECC error in case of NAND). The former is | |
1015 | * harmless, the later may mean that the read data is | |
1016 | * corrupted. But we have a CRC check-sum and we will detect | |
1017 | * this. If the VID header is still OK, we just report this as | |
1018 | * there was a bit-flip, to force scrubbing. | |
801c135c | 1019 | */ |
eb89580e | 1020 | if (err == -EBADMSG) |
756e1df1 | 1021 | read_err = UBI_IO_BAD_HDR_EBADMSG; |
801c135c AB |
1022 | } |
1023 | ||
3261ebd7 | 1024 | magic = be32_to_cpu(vid_hdr->magic); |
801c135c | 1025 | if (magic != UBI_VID_HDR_MAGIC) { |
eb89580e AB |
1026 | if (read_err) |
1027 | return read_err; | |
1028 | ||
801c135c AB |
1029 | /* |
1030 | * If we have read all 0xFF bytes, the VID header probably does | |
1031 | * not exist and the physical eraseblock is assumed to be free. | |
801c135c | 1032 | */ |
eb89580e | 1033 | if (check_pattern(vid_hdr, 0xFF, UBI_VID_HDR_SIZE)) { |
801c135c | 1034 | /* The physical eraseblock is supposedly free */ |
801c135c AB |
1035 | if (verbose) |
1036 | ubi_warn("no VID header found at PEB %d, " | |
1037 | "only 0xFF bytes", pnum); | |
ed45819f AB |
1038 | else if (UBI_IO_DEBUG) |
1039 | dbg_msg("no VID header found at PEB %d, " | |
1040 | "only 0xFF bytes", pnum); | |
801c135c AB |
1041 | return UBI_IO_PEB_FREE; |
1042 | } | |
1043 | ||
1044 | /* | |
1045 | * This is not a valid VID header, and these are not 0xFF | |
1046 | * bytes. Report that the header is corrupted. | |
1047 | */ | |
1048 | if (verbose) { | |
1049 | ubi_warn("bad magic number at PEB %d: %08x instead of " | |
1050 | "%08x", pnum, magic, UBI_VID_HDR_MAGIC); | |
1051 | ubi_dbg_dump_vid_hdr(vid_hdr); | |
ed45819f AB |
1052 | } else if (UBI_IO_DEBUG) |
1053 | dbg_msg("bad magic number at PEB %d: %08x instead of " | |
1054 | "%08x", pnum, magic, UBI_VID_HDR_MAGIC); | |
786d7831 | 1055 | return UBI_IO_BAD_HDR; |
801c135c AB |
1056 | } |
1057 | ||
1058 | crc = crc32(UBI_CRC32_INIT, vid_hdr, UBI_VID_HDR_SIZE_CRC); | |
3261ebd7 | 1059 | hdr_crc = be32_to_cpu(vid_hdr->hdr_crc); |
801c135c AB |
1060 | |
1061 | if (hdr_crc != crc) { | |
1062 | if (verbose) { | |
1063 | ubi_warn("bad CRC at PEB %d, calculated %#08x, " | |
1064 | "read %#08x", pnum, crc, hdr_crc); | |
1065 | ubi_dbg_dump_vid_hdr(vid_hdr); | |
ed45819f AB |
1066 | } else if (UBI_IO_DEBUG) |
1067 | dbg_msg("bad CRC at PEB %d, calculated %#08x, " | |
1068 | "read %#08x", pnum, crc, hdr_crc); | |
eb89580e | 1069 | return read_err ?: UBI_IO_BAD_HDR; |
801c135c AB |
1070 | } |
1071 | ||
1072 | /* Validate the VID header that we have just read */ | |
1073 | err = validate_vid_hdr(ubi, vid_hdr); | |
1074 | if (err) { | |
1075 | ubi_err("validation failed for PEB %d", pnum); | |
1076 | return -EINVAL; | |
1077 | } | |
1078 | ||
eb89580e AB |
1079 | /* |
1080 | * If there was a read error (%-EBADMSG), but the header CRC is still | |
1081 | * OK, report about a bit-flip to force scrubbing on this PEB. | |
1082 | */ | |
801c135c AB |
1083 | return read_err ? UBI_IO_BITFLIPS : 0; |
1084 | } | |
1085 | ||
1086 | /** | |
1087 | * ubi_io_write_vid_hdr - write a volume identifier header. | |
1088 | * @ubi: UBI device description object | |
1089 | * @pnum: the physical eraseblock number to write to | |
1090 | * @vid_hdr: the volume identifier header to write | |
1091 | * | |
1092 | * This function writes the volume identifier header described by @vid_hdr to | |
1093 | * physical eraseblock @pnum. This function automatically fills the | |
1094 | * @vid_hdr->magic and the @vid_hdr->version fields, as well as calculates | |
1095 | * header CRC checksum and stores it at vid_hdr->hdr_crc. | |
1096 | * | |
1097 | * This function returns zero in case of success and a negative error code in | |
1098 | * case of failure. If %-EIO is returned, the physical eraseblock probably went | |
1099 | * bad. | |
1100 | */ | |
e88d6e10 | 1101 | int ubi_io_write_vid_hdr(struct ubi_device *ubi, int pnum, |
801c135c AB |
1102 | struct ubi_vid_hdr *vid_hdr) |
1103 | { | |
1104 | int err; | |
1105 | uint32_t crc; | |
1106 | void *p; | |
1107 | ||
1108 | dbg_io("write VID header to PEB %d", pnum); | |
1109 | ubi_assert(pnum >= 0 && pnum < ubi->peb_count); | |
1110 | ||
1111 | err = paranoid_check_peb_ec_hdr(ubi, pnum); | |
1112 | if (err) | |
adbf05e3 | 1113 | return err; |
801c135c | 1114 | |
3261ebd7 | 1115 | vid_hdr->magic = cpu_to_be32(UBI_VID_HDR_MAGIC); |
801c135c AB |
1116 | vid_hdr->version = UBI_VERSION; |
1117 | crc = crc32(UBI_CRC32_INIT, vid_hdr, UBI_VID_HDR_SIZE_CRC); | |
3261ebd7 | 1118 | vid_hdr->hdr_crc = cpu_to_be32(crc); |
801c135c AB |
1119 | |
1120 | err = paranoid_check_vid_hdr(ubi, pnum, vid_hdr); | |
1121 | if (err) | |
adbf05e3 | 1122 | return err; |
801c135c AB |
1123 | |
1124 | p = (char *)vid_hdr - ubi->vid_hdr_shift; | |
1125 | err = ubi_io_write(ubi, p, pnum, ubi->vid_hdr_aloffset, | |
1126 | ubi->vid_hdr_alsize); | |
1127 | return err; | |
1128 | } | |
1129 | ||
1130 | #ifdef CONFIG_MTD_UBI_DEBUG_PARANOID | |
1131 | ||
1132 | /** | |
1133 | * paranoid_check_not_bad - ensure that a physical eraseblock is not bad. | |
1134 | * @ubi: UBI device description object | |
1135 | * @pnum: physical eraseblock number to check | |
1136 | * | |
adbf05e3 AB |
1137 | * This function returns zero if the physical eraseblock is good, %-EINVAL if |
1138 | * it is bad and a negative error code if an error occurred. | |
801c135c AB |
1139 | */ |
1140 | static int paranoid_check_not_bad(const struct ubi_device *ubi, int pnum) | |
1141 | { | |
1142 | int err; | |
1143 | ||
1144 | err = ubi_io_is_bad(ubi, pnum); | |
1145 | if (!err) | |
1146 | return err; | |
1147 | ||
1148 | ubi_err("paranoid check failed for PEB %d", pnum); | |
1149 | ubi_dbg_dump_stack(); | |
adbf05e3 | 1150 | return err > 0 ? -EINVAL : err; |
801c135c AB |
1151 | } |
1152 | ||
1153 | /** | |
1154 | * paranoid_check_ec_hdr - check if an erase counter header is all right. | |
1155 | * @ubi: UBI device description object | |
1156 | * @pnum: physical eraseblock number the erase counter header belongs to | |
1157 | * @ec_hdr: the erase counter header to check | |
1158 | * | |
1159 | * This function returns zero if the erase counter header contains valid | |
adbf05e3 | 1160 | * values, and %-EINVAL if not. |
801c135c AB |
1161 | */ |
1162 | static int paranoid_check_ec_hdr(const struct ubi_device *ubi, int pnum, | |
1163 | const struct ubi_ec_hdr *ec_hdr) | |
1164 | { | |
1165 | int err; | |
1166 | uint32_t magic; | |
1167 | ||
3261ebd7 | 1168 | magic = be32_to_cpu(ec_hdr->magic); |
801c135c AB |
1169 | if (magic != UBI_EC_HDR_MAGIC) { |
1170 | ubi_err("bad magic %#08x, must be %#08x", | |
1171 | magic, UBI_EC_HDR_MAGIC); | |
1172 | goto fail; | |
1173 | } | |
1174 | ||
1175 | err = validate_ec_hdr(ubi, ec_hdr); | |
1176 | if (err) { | |
1177 | ubi_err("paranoid check failed for PEB %d", pnum); | |
1178 | goto fail; | |
1179 | } | |
1180 | ||
1181 | return 0; | |
1182 | ||
1183 | fail: | |
1184 | ubi_dbg_dump_ec_hdr(ec_hdr); | |
1185 | ubi_dbg_dump_stack(); | |
adbf05e3 | 1186 | return -EINVAL; |
801c135c AB |
1187 | } |
1188 | ||
1189 | /** | |
ebaaf1af | 1190 | * paranoid_check_peb_ec_hdr - check erase counter header. |
801c135c AB |
1191 | * @ubi: UBI device description object |
1192 | * @pnum: the physical eraseblock number to check | |
1193 | * | |
adbf05e3 AB |
1194 | * This function returns zero if the erase counter header is all right and and |
1195 | * a negative error code if not or if an error occurred. | |
801c135c AB |
1196 | */ |
1197 | static int paranoid_check_peb_ec_hdr(const struct ubi_device *ubi, int pnum) | |
1198 | { | |
1199 | int err; | |
1200 | uint32_t crc, hdr_crc; | |
1201 | struct ubi_ec_hdr *ec_hdr; | |
1202 | ||
33818bbb | 1203 | ec_hdr = kzalloc(ubi->ec_hdr_alsize, GFP_NOFS); |
801c135c AB |
1204 | if (!ec_hdr) |
1205 | return -ENOMEM; | |
1206 | ||
1207 | err = ubi_io_read(ubi, ec_hdr, pnum, 0, UBI_EC_HDR_SIZE); | |
1208 | if (err && err != UBI_IO_BITFLIPS && err != -EBADMSG) | |
1209 | goto exit; | |
1210 | ||
1211 | crc = crc32(UBI_CRC32_INIT, ec_hdr, UBI_EC_HDR_SIZE_CRC); | |
3261ebd7 | 1212 | hdr_crc = be32_to_cpu(ec_hdr->hdr_crc); |
801c135c AB |
1213 | if (hdr_crc != crc) { |
1214 | ubi_err("bad CRC, calculated %#08x, read %#08x", crc, hdr_crc); | |
1215 | ubi_err("paranoid check failed for PEB %d", pnum); | |
1216 | ubi_dbg_dump_ec_hdr(ec_hdr); | |
1217 | ubi_dbg_dump_stack(); | |
adbf05e3 | 1218 | err = -EINVAL; |
801c135c AB |
1219 | goto exit; |
1220 | } | |
1221 | ||
1222 | err = paranoid_check_ec_hdr(ubi, pnum, ec_hdr); | |
1223 | ||
1224 | exit: | |
1225 | kfree(ec_hdr); | |
1226 | return err; | |
1227 | } | |
1228 | ||
1229 | /** | |
1230 | * paranoid_check_vid_hdr - check that a volume identifier header is all right. | |
1231 | * @ubi: UBI device description object | |
1232 | * @pnum: physical eraseblock number the volume identifier header belongs to | |
1233 | * @vid_hdr: the volume identifier header to check | |
1234 | * | |
1235 | * This function returns zero if the volume identifier header is all right, and | |
adbf05e3 | 1236 | * %-EINVAL if not. |
801c135c AB |
1237 | */ |
1238 | static int paranoid_check_vid_hdr(const struct ubi_device *ubi, int pnum, | |
1239 | const struct ubi_vid_hdr *vid_hdr) | |
1240 | { | |
1241 | int err; | |
1242 | uint32_t magic; | |
1243 | ||
3261ebd7 | 1244 | magic = be32_to_cpu(vid_hdr->magic); |
801c135c AB |
1245 | if (magic != UBI_VID_HDR_MAGIC) { |
1246 | ubi_err("bad VID header magic %#08x at PEB %d, must be %#08x", | |
1247 | magic, pnum, UBI_VID_HDR_MAGIC); | |
1248 | goto fail; | |
1249 | } | |
1250 | ||
1251 | err = validate_vid_hdr(ubi, vid_hdr); | |
1252 | if (err) { | |
1253 | ubi_err("paranoid check failed for PEB %d", pnum); | |
1254 | goto fail; | |
1255 | } | |
1256 | ||
1257 | return err; | |
1258 | ||
1259 | fail: | |
1260 | ubi_err("paranoid check failed for PEB %d", pnum); | |
1261 | ubi_dbg_dump_vid_hdr(vid_hdr); | |
1262 | ubi_dbg_dump_stack(); | |
adbf05e3 | 1263 | return -EINVAL; |
801c135c AB |
1264 | |
1265 | } | |
1266 | ||
1267 | /** | |
ebaaf1af | 1268 | * paranoid_check_peb_vid_hdr - check volume identifier header. |
801c135c AB |
1269 | * @ubi: UBI device description object |
1270 | * @pnum: the physical eraseblock number to check | |
1271 | * | |
1272 | * This function returns zero if the volume identifier header is all right, | |
adbf05e3 | 1273 | * and a negative error code if not or if an error occurred. |
801c135c AB |
1274 | */ |
1275 | static int paranoid_check_peb_vid_hdr(const struct ubi_device *ubi, int pnum) | |
1276 | { | |
1277 | int err; | |
1278 | uint32_t crc, hdr_crc; | |
1279 | struct ubi_vid_hdr *vid_hdr; | |
1280 | void *p; | |
1281 | ||
33818bbb | 1282 | vid_hdr = ubi_zalloc_vid_hdr(ubi, GFP_NOFS); |
801c135c AB |
1283 | if (!vid_hdr) |
1284 | return -ENOMEM; | |
1285 | ||
1286 | p = (char *)vid_hdr - ubi->vid_hdr_shift; | |
1287 | err = ubi_io_read(ubi, p, pnum, ubi->vid_hdr_aloffset, | |
1288 | ubi->vid_hdr_alsize); | |
1289 | if (err && err != UBI_IO_BITFLIPS && err != -EBADMSG) | |
1290 | goto exit; | |
1291 | ||
1292 | crc = crc32(UBI_CRC32_INIT, vid_hdr, UBI_EC_HDR_SIZE_CRC); | |
3261ebd7 | 1293 | hdr_crc = be32_to_cpu(vid_hdr->hdr_crc); |
801c135c AB |
1294 | if (hdr_crc != crc) { |
1295 | ubi_err("bad VID header CRC at PEB %d, calculated %#08x, " | |
1296 | "read %#08x", pnum, crc, hdr_crc); | |
1297 | ubi_err("paranoid check failed for PEB %d", pnum); | |
1298 | ubi_dbg_dump_vid_hdr(vid_hdr); | |
1299 | ubi_dbg_dump_stack(); | |
adbf05e3 | 1300 | err = -EINVAL; |
801c135c AB |
1301 | goto exit; |
1302 | } | |
1303 | ||
1304 | err = paranoid_check_vid_hdr(ubi, pnum, vid_hdr); | |
1305 | ||
1306 | exit: | |
1307 | ubi_free_vid_hdr(ubi, vid_hdr); | |
1308 | return err; | |
1309 | } | |
1310 | ||
6e9065d7 AB |
1311 | /** |
1312 | * ubi_dbg_check_write - make sure write succeeded. | |
1313 | * @ubi: UBI device description object | |
1314 | * @buf: buffer with data which were written | |
1315 | * @pnum: physical eraseblock number the data were written to | |
1316 | * @offset: offset within the physical eraseblock the data were written to | |
1317 | * @len: how many bytes were written | |
1318 | * | |
1319 | * This functions reads data which were recently written and compares it with | |
1320 | * the original data buffer - the data have to match. Returns zero if the data | |
1321 | * match and a negative error code if not or in case of failure. | |
1322 | */ | |
1323 | int ubi_dbg_check_write(struct ubi_device *ubi, const void *buf, int pnum, | |
1324 | int offset, int len) | |
1325 | { | |
1326 | int err, i; | |
1327 | ||
1328 | mutex_lock(&ubi->dbg_buf_mutex); | |
1329 | err = ubi_io_read(ubi, ubi->dbg_peb_buf, pnum, offset, len); | |
1330 | if (err) | |
1331 | goto out_unlock; | |
1332 | ||
1333 | for (i = 0; i < len; i++) { | |
1334 | uint8_t c = ((uint8_t *)buf)[i]; | |
1335 | uint8_t c1 = ((uint8_t *)ubi->dbg_peb_buf)[i]; | |
1336 | int dump_len; | |
1337 | ||
1338 | if (c == c1) | |
1339 | continue; | |
1340 | ||
1341 | ubi_err("paranoid check failed for PEB %d:%d, len %d", | |
1342 | pnum, offset, len); | |
1343 | ubi_msg("data differ at position %d", i); | |
1344 | dump_len = max_t(int, 128, len - i); | |
1345 | ubi_msg("hex dump of the original buffer from %d to %d", | |
1346 | i, i + dump_len); | |
1347 | print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1, | |
1348 | buf + i, dump_len, 1); | |
1349 | ubi_msg("hex dump of the read buffer from %d to %d", | |
1350 | i, i + dump_len); | |
1351 | print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1, | |
1352 | ubi->dbg_peb_buf + i, dump_len, 1); | |
1353 | ubi_dbg_dump_stack(); | |
1354 | err = -EINVAL; | |
1355 | goto out_unlock; | |
1356 | } | |
1357 | mutex_unlock(&ubi->dbg_buf_mutex); | |
1358 | ||
1359 | return 0; | |
1360 | ||
1361 | out_unlock: | |
1362 | mutex_unlock(&ubi->dbg_buf_mutex); | |
1363 | return err; | |
1364 | } | |
1365 | ||
801c135c | 1366 | /** |
40a71a87 | 1367 | * ubi_dbg_check_all_ff - check that a region of flash is empty. |
801c135c AB |
1368 | * @ubi: UBI device description object |
1369 | * @pnum: the physical eraseblock number to check | |
1370 | * @offset: the starting offset within the physical eraseblock to check | |
1371 | * @len: the length of the region to check | |
1372 | * | |
1373 | * This function returns zero if only 0xFF bytes are present at offset | |
adbf05e3 AB |
1374 | * @offset of the physical eraseblock @pnum, and a negative error code if not |
1375 | * or if an error occurred. | |
801c135c | 1376 | */ |
40a71a87 | 1377 | int ubi_dbg_check_all_ff(struct ubi_device *ubi, int pnum, int offset, int len) |
801c135c AB |
1378 | { |
1379 | size_t read; | |
1380 | int err; | |
801c135c AB |
1381 | loff_t addr = (loff_t)pnum * ubi->peb_size + offset; |
1382 | ||
e88d6e10 AB |
1383 | mutex_lock(&ubi->dbg_buf_mutex); |
1384 | err = ubi->mtd->read(ubi->mtd, addr, len, &read, ubi->dbg_peb_buf); | |
801c135c AB |
1385 | if (err && err != -EUCLEAN) { |
1386 | ubi_err("error %d while reading %d bytes from PEB %d:%d, " | |
1387 | "read %zd bytes", err, len, pnum, offset, read); | |
1388 | goto error; | |
1389 | } | |
1390 | ||
e88d6e10 | 1391 | err = check_pattern(ubi->dbg_peb_buf, 0xFF, len); |
801c135c AB |
1392 | if (err == 0) { |
1393 | ubi_err("flash region at PEB %d:%d, length %d does not " | |
1394 | "contain all 0xFF bytes", pnum, offset, len); | |
1395 | goto fail; | |
1396 | } | |
e88d6e10 | 1397 | mutex_unlock(&ubi->dbg_buf_mutex); |
801c135c | 1398 | |
801c135c AB |
1399 | return 0; |
1400 | ||
1401 | fail: | |
1402 | ubi_err("paranoid check failed for PEB %d", pnum); | |
c8566350 | 1403 | ubi_msg("hex dump of the %d-%d region", offset, offset + len); |
6986646b | 1404 | print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1, |
e88d6e10 | 1405 | ubi->dbg_peb_buf, len, 1); |
adbf05e3 | 1406 | err = -EINVAL; |
801c135c AB |
1407 | error: |
1408 | ubi_dbg_dump_stack(); | |
e88d6e10 | 1409 | mutex_unlock(&ubi->dbg_buf_mutex); |
801c135c AB |
1410 | return err; |
1411 | } | |
1412 | ||
1413 | #endif /* CONFIG_MTD_UBI_DEBUG_PARANOID */ |