Commit | Line | Data |
---|---|---|
99c4a634 DM |
1 | /* |
2 | * at91_can.c - CAN network driver for AT91 SoC CAN controller | |
3 | * | |
4 | * (C) 2007 by Hans J. Koch <hjk@linutronix.de> | |
dbe91325 | 5 | * (C) 2008, 2009, 2010 by Marc Kleine-Budde <kernel@pengutronix.de> |
99c4a634 DM |
6 | * |
7 | * This software may be distributed under the terms of the GNU General | |
8 | * Public License ("GPL") version 2 as distributed in the 'COPYING' | |
9 | * file from the main directory of the linux kernel source. | |
10 | * | |
11 | * Send feedback to <socketcan-users@lists.berlios.de> | |
12 | * | |
13 | * | |
14 | * Your platform definition file should specify something like: | |
15 | * | |
16 | * static struct at91_can_data ek_can_data = { | |
17 | * transceiver_switch = sam9263ek_transceiver_switch, | |
18 | * }; | |
19 | * | |
20 | * at91_add_device_can(&ek_can_data); | |
21 | * | |
22 | */ | |
23 | ||
24 | #include <linux/clk.h> | |
25 | #include <linux/errno.h> | |
26 | #include <linux/if_arp.h> | |
27 | #include <linux/init.h> | |
28 | #include <linux/interrupt.h> | |
29 | #include <linux/kernel.h> | |
30 | #include <linux/module.h> | |
31 | #include <linux/netdevice.h> | |
32 | #include <linux/platform_device.h> | |
33 | #include <linux/skbuff.h> | |
34 | #include <linux/spinlock.h> | |
35 | #include <linux/string.h> | |
36 | #include <linux/types.h> | |
37 | ||
99c4a634 DM |
38 | #include <linux/can/dev.h> |
39 | #include <linux/can/error.h> | |
40 | ||
41 | #include <mach/board.h> | |
42 | ||
43 | #define DRV_NAME "at91_can" | |
44 | #define AT91_NAPI_WEIGHT 12 | |
45 | ||
46 | /* | |
47 | * RX/TX Mailbox split | |
48 | * don't dare to touch | |
49 | */ | |
50 | #define AT91_MB_RX_NUM 12 | |
51 | #define AT91_MB_TX_SHIFT 2 | |
52 | ||
53 | #define AT91_MB_RX_FIRST 0 | |
54 | #define AT91_MB_RX_LAST (AT91_MB_RX_FIRST + AT91_MB_RX_NUM - 1) | |
55 | ||
56 | #define AT91_MB_RX_MASK(i) ((1 << (i)) - 1) | |
57 | #define AT91_MB_RX_SPLIT 8 | |
58 | #define AT91_MB_RX_LOW_LAST (AT91_MB_RX_SPLIT - 1) | |
59 | #define AT91_MB_RX_LOW_MASK (AT91_MB_RX_MASK(AT91_MB_RX_SPLIT)) | |
60 | ||
61 | #define AT91_MB_TX_NUM (1 << AT91_MB_TX_SHIFT) | |
62 | #define AT91_MB_TX_FIRST (AT91_MB_RX_LAST + 1) | |
63 | #define AT91_MB_TX_LAST (AT91_MB_TX_FIRST + AT91_MB_TX_NUM - 1) | |
64 | ||
65 | #define AT91_NEXT_PRIO_SHIFT (AT91_MB_TX_SHIFT) | |
66 | #define AT91_NEXT_PRIO_MASK (0xf << AT91_MB_TX_SHIFT) | |
67 | #define AT91_NEXT_MB_MASK (AT91_MB_TX_NUM - 1) | |
68 | #define AT91_NEXT_MASK ((AT91_MB_TX_NUM - 1) | AT91_NEXT_PRIO_MASK) | |
69 | ||
70 | /* Common registers */ | |
71 | enum at91_reg { | |
72 | AT91_MR = 0x000, | |
73 | AT91_IER = 0x004, | |
74 | AT91_IDR = 0x008, | |
75 | AT91_IMR = 0x00C, | |
76 | AT91_SR = 0x010, | |
77 | AT91_BR = 0x014, | |
78 | AT91_TIM = 0x018, | |
79 | AT91_TIMESTP = 0x01C, | |
80 | AT91_ECR = 0x020, | |
81 | AT91_TCR = 0x024, | |
82 | AT91_ACR = 0x028, | |
83 | }; | |
84 | ||
85 | /* Mailbox registers (0 <= i <= 15) */ | |
86 | #define AT91_MMR(i) (enum at91_reg)(0x200 + ((i) * 0x20)) | |
87 | #define AT91_MAM(i) (enum at91_reg)(0x204 + ((i) * 0x20)) | |
88 | #define AT91_MID(i) (enum at91_reg)(0x208 + ((i) * 0x20)) | |
89 | #define AT91_MFID(i) (enum at91_reg)(0x20C + ((i) * 0x20)) | |
90 | #define AT91_MSR(i) (enum at91_reg)(0x210 + ((i) * 0x20)) | |
91 | #define AT91_MDL(i) (enum at91_reg)(0x214 + ((i) * 0x20)) | |
92 | #define AT91_MDH(i) (enum at91_reg)(0x218 + ((i) * 0x20)) | |
93 | #define AT91_MCR(i) (enum at91_reg)(0x21C + ((i) * 0x20)) | |
94 | ||
95 | /* Register bits */ | |
96 | #define AT91_MR_CANEN BIT(0) | |
97 | #define AT91_MR_LPM BIT(1) | |
98 | #define AT91_MR_ABM BIT(2) | |
99 | #define AT91_MR_OVL BIT(3) | |
100 | #define AT91_MR_TEOF BIT(4) | |
101 | #define AT91_MR_TTM BIT(5) | |
102 | #define AT91_MR_TIMFRZ BIT(6) | |
103 | #define AT91_MR_DRPT BIT(7) | |
104 | ||
105 | #define AT91_SR_RBSY BIT(29) | |
106 | ||
107 | #define AT91_MMR_PRIO_SHIFT (16) | |
108 | ||
109 | #define AT91_MID_MIDE BIT(29) | |
110 | ||
111 | #define AT91_MSR_MRTR BIT(20) | |
112 | #define AT91_MSR_MABT BIT(22) | |
113 | #define AT91_MSR_MRDY BIT(23) | |
114 | #define AT91_MSR_MMI BIT(24) | |
115 | ||
116 | #define AT91_MCR_MRTR BIT(20) | |
117 | #define AT91_MCR_MTCR BIT(23) | |
118 | ||
119 | /* Mailbox Modes */ | |
120 | enum at91_mb_mode { | |
121 | AT91_MB_MODE_DISABLED = 0, | |
122 | AT91_MB_MODE_RX = 1, | |
123 | AT91_MB_MODE_RX_OVRWR = 2, | |
124 | AT91_MB_MODE_TX = 3, | |
125 | AT91_MB_MODE_CONSUMER = 4, | |
126 | AT91_MB_MODE_PRODUCER = 5, | |
127 | }; | |
128 | ||
129 | /* Interrupt mask bits */ | |
130 | #define AT91_IRQ_MB_RX ((1 << (AT91_MB_RX_LAST + 1)) \ | |
131 | - (1 << AT91_MB_RX_FIRST)) | |
132 | #define AT91_IRQ_MB_TX ((1 << (AT91_MB_TX_LAST + 1)) \ | |
133 | - (1 << AT91_MB_TX_FIRST)) | |
134 | #define AT91_IRQ_MB_ALL (AT91_IRQ_MB_RX | AT91_IRQ_MB_TX) | |
135 | ||
136 | #define AT91_IRQ_ERRA (1 << 16) | |
137 | #define AT91_IRQ_WARN (1 << 17) | |
138 | #define AT91_IRQ_ERRP (1 << 18) | |
139 | #define AT91_IRQ_BOFF (1 << 19) | |
140 | #define AT91_IRQ_SLEEP (1 << 20) | |
141 | #define AT91_IRQ_WAKEUP (1 << 21) | |
142 | #define AT91_IRQ_TOVF (1 << 22) | |
143 | #define AT91_IRQ_TSTP (1 << 23) | |
144 | #define AT91_IRQ_CERR (1 << 24) | |
145 | #define AT91_IRQ_SERR (1 << 25) | |
146 | #define AT91_IRQ_AERR (1 << 26) | |
147 | #define AT91_IRQ_FERR (1 << 27) | |
148 | #define AT91_IRQ_BERR (1 << 28) | |
149 | ||
150 | #define AT91_IRQ_ERR_ALL (0x1fff0000) | |
151 | #define AT91_IRQ_ERR_FRAME (AT91_IRQ_CERR | AT91_IRQ_SERR | \ | |
152 | AT91_IRQ_AERR | AT91_IRQ_FERR | AT91_IRQ_BERR) | |
153 | #define AT91_IRQ_ERR_LINE (AT91_IRQ_ERRA | AT91_IRQ_WARN | \ | |
154 | AT91_IRQ_ERRP | AT91_IRQ_BOFF) | |
155 | ||
156 | #define AT91_IRQ_ALL (0x1fffffff) | |
157 | ||
158 | struct at91_priv { | |
159 | struct can_priv can; /* must be the first member! */ | |
160 | struct net_device *dev; | |
161 | struct napi_struct napi; | |
162 | ||
163 | void __iomem *reg_base; | |
164 | ||
165 | u32 reg_sr; | |
166 | unsigned int tx_next; | |
167 | unsigned int tx_echo; | |
168 | unsigned int rx_next; | |
169 | ||
170 | struct clk *clk; | |
171 | struct at91_can_data *pdata; | |
172 | }; | |
173 | ||
174 | static struct can_bittiming_const at91_bittiming_const = { | |
175 | .tseg1_min = 4, | |
176 | .tseg1_max = 16, | |
177 | .tseg2_min = 2, | |
178 | .tseg2_max = 8, | |
179 | .sjw_max = 4, | |
180 | .brp_min = 2, | |
181 | .brp_max = 128, | |
182 | .brp_inc = 1, | |
183 | }; | |
184 | ||
185 | static inline int get_tx_next_mb(const struct at91_priv *priv) | |
186 | { | |
187 | return (priv->tx_next & AT91_NEXT_MB_MASK) + AT91_MB_TX_FIRST; | |
188 | } | |
189 | ||
190 | static inline int get_tx_next_prio(const struct at91_priv *priv) | |
191 | { | |
192 | return (priv->tx_next >> AT91_NEXT_PRIO_SHIFT) & 0xf; | |
193 | } | |
194 | ||
195 | static inline int get_tx_echo_mb(const struct at91_priv *priv) | |
196 | { | |
197 | return (priv->tx_echo & AT91_NEXT_MB_MASK) + AT91_MB_TX_FIRST; | |
198 | } | |
199 | ||
200 | static inline u32 at91_read(const struct at91_priv *priv, enum at91_reg reg) | |
201 | { | |
202 | return readl(priv->reg_base + reg); | |
203 | } | |
204 | ||
205 | static inline void at91_write(const struct at91_priv *priv, enum at91_reg reg, | |
206 | u32 value) | |
207 | { | |
208 | writel(value, priv->reg_base + reg); | |
209 | } | |
210 | ||
211 | static inline void set_mb_mode_prio(const struct at91_priv *priv, | |
212 | unsigned int mb, enum at91_mb_mode mode, int prio) | |
213 | { | |
214 | at91_write(priv, AT91_MMR(mb), (mode << 24) | (prio << 16)); | |
215 | } | |
216 | ||
217 | static inline void set_mb_mode(const struct at91_priv *priv, unsigned int mb, | |
218 | enum at91_mb_mode mode) | |
219 | { | |
220 | set_mb_mode_prio(priv, mb, mode, 0); | |
221 | } | |
222 | ||
99c4a634 DM |
223 | /* |
224 | * Swtich transceiver on or off | |
225 | */ | |
226 | static void at91_transceiver_switch(const struct at91_priv *priv, int on) | |
227 | { | |
228 | if (priv->pdata && priv->pdata->transceiver_switch) | |
229 | priv->pdata->transceiver_switch(on); | |
230 | } | |
231 | ||
232 | static void at91_setup_mailboxes(struct net_device *dev) | |
233 | { | |
234 | struct at91_priv *priv = netdev_priv(dev); | |
235 | unsigned int i; | |
236 | ||
237 | /* | |
238 | * The first 12 mailboxes are used as a reception FIFO. The | |
239 | * last mailbox is configured with overwrite option. The | |
240 | * overwrite flag indicates a FIFO overflow. | |
241 | */ | |
242 | for (i = AT91_MB_RX_FIRST; i < AT91_MB_RX_LAST; i++) | |
243 | set_mb_mode(priv, i, AT91_MB_MODE_RX); | |
244 | set_mb_mode(priv, AT91_MB_RX_LAST, AT91_MB_MODE_RX_OVRWR); | |
245 | ||
246 | /* The last 4 mailboxes are used for transmitting. */ | |
247 | for (i = AT91_MB_TX_FIRST; i <= AT91_MB_TX_LAST; i++) | |
248 | set_mb_mode_prio(priv, i, AT91_MB_MODE_TX, 0); | |
249 | ||
250 | /* Reset tx and rx helper pointers */ | |
251 | priv->tx_next = priv->tx_echo = priv->rx_next = 0; | |
252 | } | |
253 | ||
254 | static int at91_set_bittiming(struct net_device *dev) | |
255 | { | |
256 | const struct at91_priv *priv = netdev_priv(dev); | |
257 | const struct can_bittiming *bt = &priv->can.bittiming; | |
258 | u32 reg_br; | |
259 | ||
dbe91325 MKB |
260 | reg_br = ((priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES) ? 1 << 24 : 0) | |
261 | ((bt->brp - 1) << 16) | ((bt->sjw - 1) << 12) | | |
99c4a634 DM |
262 | ((bt->prop_seg - 1) << 8) | ((bt->phase_seg1 - 1) << 4) | |
263 | ((bt->phase_seg2 - 1) << 0); | |
264 | ||
265 | dev_info(dev->dev.parent, "writing AT91_BR: 0x%08x\n", reg_br); | |
266 | ||
267 | at91_write(priv, AT91_BR, reg_br); | |
268 | ||
269 | return 0; | |
270 | } | |
271 | ||
272 | static void at91_chip_start(struct net_device *dev) | |
273 | { | |
274 | struct at91_priv *priv = netdev_priv(dev); | |
275 | u32 reg_mr, reg_ier; | |
276 | ||
277 | /* disable interrupts */ | |
278 | at91_write(priv, AT91_IDR, AT91_IRQ_ALL); | |
279 | ||
280 | /* disable chip */ | |
281 | reg_mr = at91_read(priv, AT91_MR); | |
282 | at91_write(priv, AT91_MR, reg_mr & ~AT91_MR_CANEN); | |
283 | ||
284 | at91_setup_mailboxes(dev); | |
285 | at91_transceiver_switch(priv, 1); | |
286 | ||
287 | /* enable chip */ | |
288 | at91_write(priv, AT91_MR, AT91_MR_CANEN); | |
289 | ||
290 | priv->can.state = CAN_STATE_ERROR_ACTIVE; | |
291 | ||
292 | /* Enable interrupts */ | |
293 | reg_ier = AT91_IRQ_MB_RX | AT91_IRQ_ERRP | AT91_IRQ_ERR_FRAME; | |
294 | at91_write(priv, AT91_IDR, AT91_IRQ_ALL); | |
295 | at91_write(priv, AT91_IER, reg_ier); | |
296 | } | |
297 | ||
298 | static void at91_chip_stop(struct net_device *dev, enum can_state state) | |
299 | { | |
300 | struct at91_priv *priv = netdev_priv(dev); | |
301 | u32 reg_mr; | |
302 | ||
303 | /* disable interrupts */ | |
304 | at91_write(priv, AT91_IDR, AT91_IRQ_ALL); | |
305 | ||
306 | reg_mr = at91_read(priv, AT91_MR); | |
307 | at91_write(priv, AT91_MR, reg_mr & ~AT91_MR_CANEN); | |
308 | ||
309 | at91_transceiver_switch(priv, 0); | |
310 | priv->can.state = state; | |
311 | } | |
312 | ||
313 | /* | |
314 | * theory of operation: | |
315 | * | |
316 | * According to the datasheet priority 0 is the highest priority, 15 | |
317 | * is the lowest. If two mailboxes have the same priority level the | |
318 | * message of the mailbox with the lowest number is sent first. | |
319 | * | |
320 | * We use the first TX mailbox (AT91_MB_TX_FIRST) with prio 0, then | |
321 | * the next mailbox with prio 0, and so on, until all mailboxes are | |
322 | * used. Then we start from the beginning with mailbox | |
323 | * AT91_MB_TX_FIRST, but with prio 1, mailbox AT91_MB_TX_FIRST + 1 | |
324 | * prio 1. When we reach the last mailbox with prio 15, we have to | |
325 | * stop sending, waiting for all messages to be delivered, then start | |
326 | * again with mailbox AT91_MB_TX_FIRST prio 0. | |
327 | * | |
328 | * We use the priv->tx_next as counter for the next transmission | |
329 | * mailbox, but without the offset AT91_MB_TX_FIRST. The lower bits | |
330 | * encode the mailbox number, the upper 4 bits the mailbox priority: | |
331 | * | |
332 | * priv->tx_next = (prio << AT91_NEXT_PRIO_SHIFT) || | |
333 | * (mb - AT91_MB_TX_FIRST); | |
334 | * | |
335 | */ | |
336 | static netdev_tx_t at91_start_xmit(struct sk_buff *skb, struct net_device *dev) | |
337 | { | |
338 | struct at91_priv *priv = netdev_priv(dev); | |
339 | struct net_device_stats *stats = &dev->stats; | |
340 | struct can_frame *cf = (struct can_frame *)skb->data; | |
341 | unsigned int mb, prio; | |
342 | u32 reg_mid, reg_mcr; | |
343 | ||
3ccd4c61 OH |
344 | if (can_dropped_invalid_skb(dev, skb)) |
345 | return NETDEV_TX_OK; | |
346 | ||
99c4a634 DM |
347 | mb = get_tx_next_mb(priv); |
348 | prio = get_tx_next_prio(priv); | |
349 | ||
350 | if (unlikely(!(at91_read(priv, AT91_MSR(mb)) & AT91_MSR_MRDY))) { | |
351 | netif_stop_queue(dev); | |
352 | ||
353 | dev_err(dev->dev.parent, | |
354 | "BUG! TX buffer full when queue awake!\n"); | |
355 | return NETDEV_TX_BUSY; | |
356 | } | |
357 | ||
358 | if (cf->can_id & CAN_EFF_FLAG) | |
359 | reg_mid = (cf->can_id & CAN_EFF_MASK) | AT91_MID_MIDE; | |
360 | else | |
361 | reg_mid = (cf->can_id & CAN_SFF_MASK) << 18; | |
362 | ||
363 | reg_mcr = ((cf->can_id & CAN_RTR_FLAG) ? AT91_MCR_MRTR : 0) | | |
364 | (cf->can_dlc << 16) | AT91_MCR_MTCR; | |
365 | ||
366 | /* disable MB while writing ID (see datasheet) */ | |
367 | set_mb_mode(priv, mb, AT91_MB_MODE_DISABLED); | |
368 | at91_write(priv, AT91_MID(mb), reg_mid); | |
369 | set_mb_mode_prio(priv, mb, AT91_MB_MODE_TX, prio); | |
370 | ||
371 | at91_write(priv, AT91_MDL(mb), *(u32 *)(cf->data + 0)); | |
372 | at91_write(priv, AT91_MDH(mb), *(u32 *)(cf->data + 4)); | |
373 | ||
374 | /* This triggers transmission */ | |
375 | at91_write(priv, AT91_MCR(mb), reg_mcr); | |
376 | ||
377 | stats->tx_bytes += cf->can_dlc; | |
99c4a634 DM |
378 | |
379 | /* _NOTE_: substract AT91_MB_TX_FIRST offset from mb! */ | |
380 | can_put_echo_skb(skb, dev, mb - AT91_MB_TX_FIRST); | |
381 | ||
382 | /* | |
383 | * we have to stop the queue and deliver all messages in case | |
384 | * of a prio+mb counter wrap around. This is the case if | |
385 | * tx_next buffer prio and mailbox equals 0. | |
386 | * | |
387 | * also stop the queue if next buffer is still in use | |
388 | * (== not ready) | |
389 | */ | |
390 | priv->tx_next++; | |
391 | if (!(at91_read(priv, AT91_MSR(get_tx_next_mb(priv))) & | |
392 | AT91_MSR_MRDY) || | |
393 | (priv->tx_next & AT91_NEXT_MASK) == 0) | |
394 | netif_stop_queue(dev); | |
395 | ||
396 | /* Enable interrupt for this mailbox */ | |
397 | at91_write(priv, AT91_IER, 1 << mb); | |
398 | ||
399 | return NETDEV_TX_OK; | |
400 | } | |
401 | ||
402 | /** | |
403 | * at91_activate_rx_low - activate lower rx mailboxes | |
404 | * @priv: a91 context | |
405 | * | |
406 | * Reenables the lower mailboxes for reception of new CAN messages | |
407 | */ | |
408 | static inline void at91_activate_rx_low(const struct at91_priv *priv) | |
409 | { | |
410 | u32 mask = AT91_MB_RX_LOW_MASK; | |
411 | at91_write(priv, AT91_TCR, mask); | |
412 | } | |
413 | ||
414 | /** | |
415 | * at91_activate_rx_mb - reactive single rx mailbox | |
416 | * @priv: a91 context | |
417 | * @mb: mailbox to reactivate | |
418 | * | |
419 | * Reenables given mailbox for reception of new CAN messages | |
420 | */ | |
421 | static inline void at91_activate_rx_mb(const struct at91_priv *priv, | |
422 | unsigned int mb) | |
423 | { | |
424 | u32 mask = 1 << mb; | |
425 | at91_write(priv, AT91_TCR, mask); | |
426 | } | |
427 | ||
428 | /** | |
429 | * at91_rx_overflow_err - send error frame due to rx overflow | |
430 | * @dev: net device | |
431 | */ | |
432 | static void at91_rx_overflow_err(struct net_device *dev) | |
433 | { | |
434 | struct net_device_stats *stats = &dev->stats; | |
435 | struct sk_buff *skb; | |
436 | struct can_frame *cf; | |
437 | ||
438 | dev_dbg(dev->dev.parent, "RX buffer overflow\n"); | |
439 | stats->rx_over_errors++; | |
440 | stats->rx_errors++; | |
441 | ||
442 | skb = alloc_can_err_skb(dev, &cf); | |
443 | if (unlikely(!skb)) | |
444 | return; | |
445 | ||
446 | cf->can_id |= CAN_ERR_CRTL; | |
447 | cf->data[1] = CAN_ERR_CRTL_RX_OVERFLOW; | |
448 | netif_receive_skb(skb); | |
449 | ||
450 | stats->rx_packets++; | |
451 | stats->rx_bytes += cf->can_dlc; | |
452 | } | |
453 | ||
454 | /** | |
455 | * at91_read_mb - read CAN msg from mailbox (lowlevel impl) | |
456 | * @dev: net device | |
457 | * @mb: mailbox number to read from | |
458 | * @cf: can frame where to store message | |
459 | * | |
460 | * Reads a CAN message from the given mailbox and stores data into | |
461 | * given can frame. "mb" and "cf" must be valid. | |
462 | */ | |
463 | static void at91_read_mb(struct net_device *dev, unsigned int mb, | |
464 | struct can_frame *cf) | |
465 | { | |
466 | const struct at91_priv *priv = netdev_priv(dev); | |
467 | u32 reg_msr, reg_mid; | |
468 | ||
469 | reg_mid = at91_read(priv, AT91_MID(mb)); | |
470 | if (reg_mid & AT91_MID_MIDE) | |
471 | cf->can_id = ((reg_mid >> 0) & CAN_EFF_MASK) | CAN_EFF_FLAG; | |
472 | else | |
473 | cf->can_id = (reg_mid >> 18) & CAN_SFF_MASK; | |
474 | ||
475 | reg_msr = at91_read(priv, AT91_MSR(mb)); | |
476 | if (reg_msr & AT91_MSR_MRTR) | |
477 | cf->can_id |= CAN_RTR_FLAG; | |
c7cd606f | 478 | cf->can_dlc = get_can_dlc((reg_msr >> 16) & 0xf); |
99c4a634 DM |
479 | |
480 | *(u32 *)(cf->data + 0) = at91_read(priv, AT91_MDL(mb)); | |
481 | *(u32 *)(cf->data + 4) = at91_read(priv, AT91_MDH(mb)); | |
482 | ||
483 | if (unlikely(mb == AT91_MB_RX_LAST && reg_msr & AT91_MSR_MMI)) | |
484 | at91_rx_overflow_err(dev); | |
485 | } | |
486 | ||
487 | /** | |
488 | * at91_read_msg - read CAN message from mailbox | |
489 | * @dev: net device | |
490 | * @mb: mail box to read from | |
491 | * | |
492 | * Reads a CAN message from given mailbox, and put into linux network | |
493 | * RX queue, does all housekeeping chores (stats, ...) | |
494 | */ | |
495 | static void at91_read_msg(struct net_device *dev, unsigned int mb) | |
496 | { | |
497 | struct net_device_stats *stats = &dev->stats; | |
498 | struct can_frame *cf; | |
499 | struct sk_buff *skb; | |
500 | ||
501 | skb = alloc_can_skb(dev, &cf); | |
502 | if (unlikely(!skb)) { | |
503 | stats->rx_dropped++; | |
504 | return; | |
505 | } | |
506 | ||
507 | at91_read_mb(dev, mb, cf); | |
508 | netif_receive_skb(skb); | |
509 | ||
510 | stats->rx_packets++; | |
511 | stats->rx_bytes += cf->can_dlc; | |
512 | } | |
513 | ||
514 | /** | |
515 | * at91_poll_rx - read multiple CAN messages from mailboxes | |
516 | * @dev: net device | |
517 | * @quota: max number of pkgs we're allowed to receive | |
518 | * | |
519 | * Theory of Operation: | |
520 | * | |
521 | * 12 of the 16 mailboxes on the chip are reserved for RX. we split | |
522 | * them into 2 groups. The lower group holds 8 and upper 4 mailboxes. | |
523 | * | |
524 | * Like it or not, but the chip always saves a received CAN message | |
525 | * into the first free mailbox it finds (starting with the | |
526 | * lowest). This makes it very difficult to read the messages in the | |
527 | * right order from the chip. This is how we work around that problem: | |
528 | * | |
529 | * The first message goes into mb nr. 0 and issues an interrupt. All | |
530 | * rx ints are disabled in the interrupt handler and a napi poll is | |
531 | * scheduled. We read the mailbox, but do _not_ reenable the mb (to | |
532 | * receive another message). | |
533 | * | |
534 | * lower mbxs upper | |
535 | * ______^______ __^__ | |
536 | * / \ / \ | |
537 | * +-+-+-+-+-+-+-+-++-+-+-+-+ | |
538 | * |x|x|x|x|x|x|x|x|| | | | | | |
539 | * +-+-+-+-+-+-+-+-++-+-+-+-+ | |
540 | * 0 0 0 0 0 0 0 0 0 0 1 1 \ mail | |
541 | * 0 1 2 3 4 5 6 7 8 9 0 1 / box | |
542 | * | |
543 | * The variable priv->rx_next points to the next mailbox to read a | |
544 | * message from. As long we're in the lower mailboxes we just read the | |
545 | * mailbox but not reenable it. | |
546 | * | |
547 | * With completion of the last of the lower mailboxes, we reenable the | |
548 | * whole first group, but continue to look for filled mailboxes in the | |
549 | * upper mailboxes. Imagine the second group like overflow mailboxes, | |
550 | * which takes CAN messages if the lower goup is full. While in the | |
551 | * upper group we reenable the mailbox right after reading it. Giving | |
552 | * the chip more room to store messages. | |
553 | * | |
554 | * After finishing we look again in the lower group if we've still | |
555 | * quota. | |
556 | * | |
557 | */ | |
558 | static int at91_poll_rx(struct net_device *dev, int quota) | |
559 | { | |
560 | struct at91_priv *priv = netdev_priv(dev); | |
561 | u32 reg_sr = at91_read(priv, AT91_SR); | |
562 | const unsigned long *addr = (unsigned long *)®_sr; | |
563 | unsigned int mb; | |
564 | int received = 0; | |
565 | ||
566 | if (priv->rx_next > AT91_MB_RX_LOW_LAST && | |
567 | reg_sr & AT91_MB_RX_LOW_MASK) | |
568 | dev_info(dev->dev.parent, | |
569 | "order of incoming frames cannot be guaranteed\n"); | |
570 | ||
571 | again: | |
572 | for (mb = find_next_bit(addr, AT91_MB_RX_NUM, priv->rx_next); | |
573 | mb < AT91_MB_RX_NUM && quota > 0; | |
574 | reg_sr = at91_read(priv, AT91_SR), | |
575 | mb = find_next_bit(addr, AT91_MB_RX_NUM, ++priv->rx_next)) { | |
576 | at91_read_msg(dev, mb); | |
577 | ||
578 | /* reactivate mailboxes */ | |
579 | if (mb == AT91_MB_RX_LOW_LAST) | |
580 | /* all lower mailboxed, if just finished it */ | |
581 | at91_activate_rx_low(priv); | |
582 | else if (mb > AT91_MB_RX_LOW_LAST) | |
583 | /* only the mailbox we read */ | |
584 | at91_activate_rx_mb(priv, mb); | |
585 | ||
586 | received++; | |
587 | quota--; | |
588 | } | |
589 | ||
590 | /* upper group completed, look again in lower */ | |
591 | if (priv->rx_next > AT91_MB_RX_LOW_LAST && | |
592 | quota > 0 && mb >= AT91_MB_RX_NUM) { | |
593 | priv->rx_next = 0; | |
594 | goto again; | |
595 | } | |
596 | ||
597 | return received; | |
598 | } | |
599 | ||
600 | static void at91_poll_err_frame(struct net_device *dev, | |
601 | struct can_frame *cf, u32 reg_sr) | |
602 | { | |
603 | struct at91_priv *priv = netdev_priv(dev); | |
604 | ||
605 | /* CRC error */ | |
606 | if (reg_sr & AT91_IRQ_CERR) { | |
607 | dev_dbg(dev->dev.parent, "CERR irq\n"); | |
608 | dev->stats.rx_errors++; | |
609 | priv->can.can_stats.bus_error++; | |
610 | cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR; | |
611 | } | |
612 | ||
613 | /* Stuffing Error */ | |
614 | if (reg_sr & AT91_IRQ_SERR) { | |
615 | dev_dbg(dev->dev.parent, "SERR irq\n"); | |
616 | dev->stats.rx_errors++; | |
617 | priv->can.can_stats.bus_error++; | |
618 | cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR; | |
619 | cf->data[2] |= CAN_ERR_PROT_STUFF; | |
620 | } | |
621 | ||
622 | /* Acknowledgement Error */ | |
623 | if (reg_sr & AT91_IRQ_AERR) { | |
624 | dev_dbg(dev->dev.parent, "AERR irq\n"); | |
625 | dev->stats.tx_errors++; | |
626 | cf->can_id |= CAN_ERR_ACK; | |
627 | } | |
628 | ||
629 | /* Form error */ | |
630 | if (reg_sr & AT91_IRQ_FERR) { | |
631 | dev_dbg(dev->dev.parent, "FERR irq\n"); | |
632 | dev->stats.rx_errors++; | |
633 | priv->can.can_stats.bus_error++; | |
634 | cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR; | |
635 | cf->data[2] |= CAN_ERR_PROT_FORM; | |
636 | } | |
637 | ||
638 | /* Bit Error */ | |
639 | if (reg_sr & AT91_IRQ_BERR) { | |
640 | dev_dbg(dev->dev.parent, "BERR irq\n"); | |
641 | dev->stats.tx_errors++; | |
642 | priv->can.can_stats.bus_error++; | |
643 | cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR; | |
644 | cf->data[2] |= CAN_ERR_PROT_BIT; | |
645 | } | |
646 | } | |
647 | ||
648 | static int at91_poll_err(struct net_device *dev, int quota, u32 reg_sr) | |
649 | { | |
650 | struct sk_buff *skb; | |
651 | struct can_frame *cf; | |
652 | ||
653 | if (quota == 0) | |
654 | return 0; | |
655 | ||
656 | skb = alloc_can_err_skb(dev, &cf); | |
657 | if (unlikely(!skb)) | |
658 | return 0; | |
659 | ||
660 | at91_poll_err_frame(dev, cf, reg_sr); | |
661 | netif_receive_skb(skb); | |
662 | ||
99c4a634 DM |
663 | dev->stats.rx_packets++; |
664 | dev->stats.rx_bytes += cf->can_dlc; | |
665 | ||
666 | return 1; | |
667 | } | |
668 | ||
669 | static int at91_poll(struct napi_struct *napi, int quota) | |
670 | { | |
671 | struct net_device *dev = napi->dev; | |
672 | const struct at91_priv *priv = netdev_priv(dev); | |
673 | u32 reg_sr = at91_read(priv, AT91_SR); | |
674 | int work_done = 0; | |
675 | ||
676 | if (reg_sr & AT91_IRQ_MB_RX) | |
677 | work_done += at91_poll_rx(dev, quota - work_done); | |
678 | ||
679 | /* | |
680 | * The error bits are clear on read, | |
681 | * so use saved value from irq handler. | |
682 | */ | |
683 | reg_sr |= priv->reg_sr; | |
684 | if (reg_sr & AT91_IRQ_ERR_FRAME) | |
685 | work_done += at91_poll_err(dev, quota - work_done, reg_sr); | |
686 | ||
687 | if (work_done < quota) { | |
688 | /* enable IRQs for frame errors and all mailboxes >= rx_next */ | |
689 | u32 reg_ier = AT91_IRQ_ERR_FRAME; | |
690 | reg_ier |= AT91_IRQ_MB_RX & ~AT91_MB_RX_MASK(priv->rx_next); | |
691 | ||
692 | napi_complete(napi); | |
693 | at91_write(priv, AT91_IER, reg_ier); | |
694 | } | |
695 | ||
696 | return work_done; | |
697 | } | |
698 | ||
699 | /* | |
700 | * theory of operation: | |
701 | * | |
702 | * priv->tx_echo holds the number of the oldest can_frame put for | |
703 | * transmission into the hardware, but not yet ACKed by the CAN tx | |
704 | * complete IRQ. | |
705 | * | |
706 | * We iterate from priv->tx_echo to priv->tx_next and check if the | |
707 | * packet has been transmitted, echo it back to the CAN framework. If | |
708 | * we discover a not yet transmitted package, stop looking for more. | |
709 | * | |
710 | */ | |
711 | static void at91_irq_tx(struct net_device *dev, u32 reg_sr) | |
712 | { | |
713 | struct at91_priv *priv = netdev_priv(dev); | |
714 | u32 reg_msr; | |
715 | unsigned int mb; | |
716 | ||
717 | /* masking of reg_sr not needed, already done by at91_irq */ | |
718 | ||
719 | for (/* nix */; (priv->tx_next - priv->tx_echo) > 0; priv->tx_echo++) { | |
720 | mb = get_tx_echo_mb(priv); | |
721 | ||
722 | /* no event in mailbox? */ | |
723 | if (!(reg_sr & (1 << mb))) | |
724 | break; | |
725 | ||
726 | /* Disable irq for this TX mailbox */ | |
727 | at91_write(priv, AT91_IDR, 1 << mb); | |
728 | ||
729 | /* | |
730 | * only echo if mailbox signals us a transfer | |
731 | * complete (MSR_MRDY). Otherwise it's a tansfer | |
732 | * abort. "can_bus_off()" takes care about the skbs | |
733 | * parked in the echo queue. | |
734 | */ | |
735 | reg_msr = at91_read(priv, AT91_MSR(mb)); | |
736 | if (likely(reg_msr & AT91_MSR_MRDY && | |
737 | ~reg_msr & AT91_MSR_MABT)) { | |
738 | /* _NOTE_: substract AT91_MB_TX_FIRST offset from mb! */ | |
739 | can_get_echo_skb(dev, mb - AT91_MB_TX_FIRST); | |
740 | dev->stats.tx_packets++; | |
741 | } | |
742 | } | |
743 | ||
744 | /* | |
745 | * restart queue if we don't have a wrap around but restart if | |
746 | * we get a TX int for the last can frame directly before a | |
747 | * wrap around. | |
748 | */ | |
749 | if ((priv->tx_next & AT91_NEXT_MASK) != 0 || | |
750 | (priv->tx_echo & AT91_NEXT_MASK) == 0) | |
751 | netif_wake_queue(dev); | |
752 | } | |
753 | ||
754 | static void at91_irq_err_state(struct net_device *dev, | |
755 | struct can_frame *cf, enum can_state new_state) | |
756 | { | |
757 | struct at91_priv *priv = netdev_priv(dev); | |
758 | u32 reg_idr, reg_ier, reg_ecr; | |
759 | u8 tec, rec; | |
760 | ||
761 | reg_ecr = at91_read(priv, AT91_ECR); | |
762 | rec = reg_ecr & 0xff; | |
763 | tec = reg_ecr >> 16; | |
764 | ||
765 | switch (priv->can.state) { | |
766 | case CAN_STATE_ERROR_ACTIVE: | |
767 | /* | |
768 | * from: ERROR_ACTIVE | |
769 | * to : ERROR_WARNING, ERROR_PASSIVE, BUS_OFF | |
770 | * => : there was a warning int | |
771 | */ | |
772 | if (new_state >= CAN_STATE_ERROR_WARNING && | |
773 | new_state <= CAN_STATE_BUS_OFF) { | |
774 | dev_dbg(dev->dev.parent, "Error Warning IRQ\n"); | |
775 | priv->can.can_stats.error_warning++; | |
776 | ||
777 | cf->can_id |= CAN_ERR_CRTL; | |
778 | cf->data[1] = (tec > rec) ? | |
779 | CAN_ERR_CRTL_TX_WARNING : | |
780 | CAN_ERR_CRTL_RX_WARNING; | |
781 | } | |
782 | case CAN_STATE_ERROR_WARNING: /* fallthrough */ | |
783 | /* | |
784 | * from: ERROR_ACTIVE, ERROR_WARNING | |
785 | * to : ERROR_PASSIVE, BUS_OFF | |
786 | * => : error passive int | |
787 | */ | |
788 | if (new_state >= CAN_STATE_ERROR_PASSIVE && | |
789 | new_state <= CAN_STATE_BUS_OFF) { | |
790 | dev_dbg(dev->dev.parent, "Error Passive IRQ\n"); | |
791 | priv->can.can_stats.error_passive++; | |
792 | ||
793 | cf->can_id |= CAN_ERR_CRTL; | |
794 | cf->data[1] = (tec > rec) ? | |
795 | CAN_ERR_CRTL_TX_PASSIVE : | |
796 | CAN_ERR_CRTL_RX_PASSIVE; | |
797 | } | |
798 | break; | |
799 | case CAN_STATE_BUS_OFF: | |
800 | /* | |
801 | * from: BUS_OFF | |
802 | * to : ERROR_ACTIVE, ERROR_WARNING, ERROR_PASSIVE | |
803 | */ | |
804 | if (new_state <= CAN_STATE_ERROR_PASSIVE) { | |
805 | cf->can_id |= CAN_ERR_RESTARTED; | |
806 | ||
807 | dev_dbg(dev->dev.parent, "restarted\n"); | |
808 | priv->can.can_stats.restarts++; | |
809 | ||
810 | netif_carrier_on(dev); | |
811 | netif_wake_queue(dev); | |
812 | } | |
813 | break; | |
814 | default: | |
815 | break; | |
816 | } | |
817 | ||
818 | ||
819 | /* process state changes depending on the new state */ | |
820 | switch (new_state) { | |
821 | case CAN_STATE_ERROR_ACTIVE: | |
822 | /* | |
823 | * actually we want to enable AT91_IRQ_WARN here, but | |
824 | * it screws up the system under certain | |
825 | * circumstances. so just enable AT91_IRQ_ERRP, thus | |
826 | * the "fallthrough" | |
827 | */ | |
828 | dev_dbg(dev->dev.parent, "Error Active\n"); | |
829 | cf->can_id |= CAN_ERR_PROT; | |
830 | cf->data[2] = CAN_ERR_PROT_ACTIVE; | |
831 | case CAN_STATE_ERROR_WARNING: /* fallthrough */ | |
832 | reg_idr = AT91_IRQ_ERRA | AT91_IRQ_WARN | AT91_IRQ_BOFF; | |
833 | reg_ier = AT91_IRQ_ERRP; | |
834 | break; | |
835 | case CAN_STATE_ERROR_PASSIVE: | |
836 | reg_idr = AT91_IRQ_ERRA | AT91_IRQ_WARN | AT91_IRQ_ERRP; | |
837 | reg_ier = AT91_IRQ_BOFF; | |
838 | break; | |
839 | case CAN_STATE_BUS_OFF: | |
840 | reg_idr = AT91_IRQ_ERRA | AT91_IRQ_ERRP | | |
841 | AT91_IRQ_WARN | AT91_IRQ_BOFF; | |
842 | reg_ier = 0; | |
843 | ||
844 | cf->can_id |= CAN_ERR_BUSOFF; | |
845 | ||
846 | dev_dbg(dev->dev.parent, "bus-off\n"); | |
847 | netif_carrier_off(dev); | |
848 | priv->can.can_stats.bus_off++; | |
849 | ||
850 | /* turn off chip, if restart is disabled */ | |
851 | if (!priv->can.restart_ms) { | |
852 | at91_chip_stop(dev, CAN_STATE_BUS_OFF); | |
853 | return; | |
854 | } | |
855 | break; | |
856 | default: | |
857 | break; | |
858 | } | |
859 | ||
860 | at91_write(priv, AT91_IDR, reg_idr); | |
861 | at91_write(priv, AT91_IER, reg_ier); | |
862 | } | |
863 | ||
864 | static void at91_irq_err(struct net_device *dev) | |
865 | { | |
866 | struct at91_priv *priv = netdev_priv(dev); | |
867 | struct sk_buff *skb; | |
868 | struct can_frame *cf; | |
869 | enum can_state new_state; | |
870 | u32 reg_sr; | |
871 | ||
872 | reg_sr = at91_read(priv, AT91_SR); | |
873 | ||
874 | /* we need to look at the unmasked reg_sr */ | |
875 | if (unlikely(reg_sr & AT91_IRQ_BOFF)) | |
876 | new_state = CAN_STATE_BUS_OFF; | |
877 | else if (unlikely(reg_sr & AT91_IRQ_ERRP)) | |
878 | new_state = CAN_STATE_ERROR_PASSIVE; | |
879 | else if (unlikely(reg_sr & AT91_IRQ_WARN)) | |
880 | new_state = CAN_STATE_ERROR_WARNING; | |
881 | else if (likely(reg_sr & AT91_IRQ_ERRA)) | |
882 | new_state = CAN_STATE_ERROR_ACTIVE; | |
883 | else { | |
884 | dev_err(dev->dev.parent, "BUG! hardware in undefined state\n"); | |
885 | return; | |
886 | } | |
887 | ||
888 | /* state hasn't changed */ | |
889 | if (likely(new_state == priv->can.state)) | |
890 | return; | |
891 | ||
892 | skb = alloc_can_err_skb(dev, &cf); | |
893 | if (unlikely(!skb)) | |
894 | return; | |
895 | ||
896 | at91_irq_err_state(dev, cf, new_state); | |
897 | netif_rx(skb); | |
898 | ||
99c4a634 DM |
899 | dev->stats.rx_packets++; |
900 | dev->stats.rx_bytes += cf->can_dlc; | |
901 | ||
902 | priv->can.state = new_state; | |
903 | } | |
904 | ||
905 | /* | |
906 | * interrupt handler | |
907 | */ | |
908 | static irqreturn_t at91_irq(int irq, void *dev_id) | |
909 | { | |
910 | struct net_device *dev = dev_id; | |
911 | struct at91_priv *priv = netdev_priv(dev); | |
912 | irqreturn_t handled = IRQ_NONE; | |
913 | u32 reg_sr, reg_imr; | |
914 | ||
915 | reg_sr = at91_read(priv, AT91_SR); | |
916 | reg_imr = at91_read(priv, AT91_IMR); | |
917 | ||
918 | /* Ignore masked interrupts */ | |
919 | reg_sr &= reg_imr; | |
920 | if (!reg_sr) | |
921 | goto exit; | |
922 | ||
923 | handled = IRQ_HANDLED; | |
924 | ||
925 | /* Receive or error interrupt? -> napi */ | |
926 | if (reg_sr & (AT91_IRQ_MB_RX | AT91_IRQ_ERR_FRAME)) { | |
927 | /* | |
928 | * The error bits are clear on read, | |
929 | * save for later use. | |
930 | */ | |
931 | priv->reg_sr = reg_sr; | |
932 | at91_write(priv, AT91_IDR, | |
933 | AT91_IRQ_MB_RX | AT91_IRQ_ERR_FRAME); | |
934 | napi_schedule(&priv->napi); | |
935 | } | |
936 | ||
937 | /* Transmission complete interrupt */ | |
938 | if (reg_sr & AT91_IRQ_MB_TX) | |
939 | at91_irq_tx(dev, reg_sr); | |
940 | ||
941 | at91_irq_err(dev); | |
942 | ||
943 | exit: | |
944 | return handled; | |
945 | } | |
946 | ||
947 | static int at91_open(struct net_device *dev) | |
948 | { | |
949 | struct at91_priv *priv = netdev_priv(dev); | |
950 | int err; | |
951 | ||
952 | clk_enable(priv->clk); | |
953 | ||
954 | /* check or determine and set bittime */ | |
955 | err = open_candev(dev); | |
956 | if (err) | |
957 | goto out; | |
958 | ||
959 | /* register interrupt handler */ | |
960 | if (request_irq(dev->irq, at91_irq, IRQF_SHARED, | |
961 | dev->name, dev)) { | |
962 | err = -EAGAIN; | |
963 | goto out_close; | |
964 | } | |
965 | ||
966 | /* start chip and queuing */ | |
967 | at91_chip_start(dev); | |
968 | napi_enable(&priv->napi); | |
969 | netif_start_queue(dev); | |
970 | ||
971 | return 0; | |
972 | ||
973 | out_close: | |
974 | close_candev(dev); | |
975 | out: | |
976 | clk_disable(priv->clk); | |
977 | ||
978 | return err; | |
979 | } | |
980 | ||
981 | /* | |
982 | * stop CAN bus activity | |
983 | */ | |
984 | static int at91_close(struct net_device *dev) | |
985 | { | |
986 | struct at91_priv *priv = netdev_priv(dev); | |
987 | ||
988 | netif_stop_queue(dev); | |
989 | napi_disable(&priv->napi); | |
990 | at91_chip_stop(dev, CAN_STATE_STOPPED); | |
991 | ||
992 | free_irq(dev->irq, dev); | |
993 | clk_disable(priv->clk); | |
994 | ||
995 | close_candev(dev); | |
996 | ||
997 | return 0; | |
998 | } | |
999 | ||
1000 | static int at91_set_mode(struct net_device *dev, enum can_mode mode) | |
1001 | { | |
1002 | switch (mode) { | |
1003 | case CAN_MODE_START: | |
1004 | at91_chip_start(dev); | |
1005 | netif_wake_queue(dev); | |
1006 | break; | |
1007 | ||
1008 | default: | |
1009 | return -EOPNOTSUPP; | |
1010 | } | |
1011 | ||
1012 | return 0; | |
1013 | } | |
1014 | ||
1015 | static const struct net_device_ops at91_netdev_ops = { | |
1016 | .ndo_open = at91_open, | |
1017 | .ndo_stop = at91_close, | |
1018 | .ndo_start_xmit = at91_start_xmit, | |
1019 | }; | |
1020 | ||
1021 | static int __init at91_can_probe(struct platform_device *pdev) | |
1022 | { | |
1023 | struct net_device *dev; | |
1024 | struct at91_priv *priv; | |
1025 | struct resource *res; | |
1026 | struct clk *clk; | |
1027 | void __iomem *addr; | |
1028 | int err, irq; | |
1029 | ||
1030 | clk = clk_get(&pdev->dev, "can_clk"); | |
1031 | if (IS_ERR(clk)) { | |
1032 | dev_err(&pdev->dev, "no clock defined\n"); | |
1033 | err = -ENODEV; | |
1034 | goto exit; | |
1035 | } | |
1036 | ||
1037 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
1038 | irq = platform_get_irq(pdev, 0); | |
4773a47d | 1039 | if (!res || irq <= 0) { |
99c4a634 DM |
1040 | err = -ENODEV; |
1041 | goto exit_put; | |
1042 | } | |
1043 | ||
1044 | if (!request_mem_region(res->start, | |
1045 | resource_size(res), | |
1046 | pdev->name)) { | |
1047 | err = -EBUSY; | |
1048 | goto exit_put; | |
1049 | } | |
1050 | ||
1051 | addr = ioremap_nocache(res->start, resource_size(res)); | |
1052 | if (!addr) { | |
1053 | err = -ENOMEM; | |
1054 | goto exit_release; | |
1055 | } | |
1056 | ||
a6e4bc53 | 1057 | dev = alloc_candev(sizeof(struct at91_priv), AT91_MB_TX_NUM); |
99c4a634 DM |
1058 | if (!dev) { |
1059 | err = -ENOMEM; | |
1060 | goto exit_iounmap; | |
1061 | } | |
1062 | ||
1063 | dev->netdev_ops = &at91_netdev_ops; | |
1064 | dev->irq = irq; | |
1065 | dev->flags |= IFF_ECHO; | |
1066 | ||
1067 | priv = netdev_priv(dev); | |
1068 | priv->can.clock.freq = clk_get_rate(clk); | |
1069 | priv->can.bittiming_const = &at91_bittiming_const; | |
1070 | priv->can.do_set_bittiming = at91_set_bittiming; | |
1071 | priv->can.do_set_mode = at91_set_mode; | |
ad72c347 | 1072 | priv->can.ctrlmode_supported = CAN_CTRLMODE_3_SAMPLES; |
99c4a634 DM |
1073 | priv->reg_base = addr; |
1074 | priv->dev = dev; | |
1075 | priv->clk = clk; | |
1076 | priv->pdata = pdev->dev.platform_data; | |
1077 | ||
1078 | netif_napi_add(dev, &priv->napi, at91_poll, AT91_NAPI_WEIGHT); | |
1079 | ||
1080 | dev_set_drvdata(&pdev->dev, dev); | |
1081 | SET_NETDEV_DEV(dev, &pdev->dev); | |
1082 | ||
1083 | err = register_candev(dev); | |
1084 | if (err) { | |
1085 | dev_err(&pdev->dev, "registering netdev failed\n"); | |
1086 | goto exit_free; | |
1087 | } | |
1088 | ||
1089 | dev_info(&pdev->dev, "device registered (reg_base=%p, irq=%d)\n", | |
1090 | priv->reg_base, dev->irq); | |
1091 | ||
1092 | return 0; | |
1093 | ||
1094 | exit_free: | |
1095 | free_netdev(dev); | |
1096 | exit_iounmap: | |
1097 | iounmap(addr); | |
1098 | exit_release: | |
1099 | release_mem_region(res->start, resource_size(res)); | |
1100 | exit_put: | |
1101 | clk_put(clk); | |
1102 | exit: | |
1103 | return err; | |
1104 | } | |
1105 | ||
1106 | static int __devexit at91_can_remove(struct platform_device *pdev) | |
1107 | { | |
1108 | struct net_device *dev = platform_get_drvdata(pdev); | |
1109 | struct at91_priv *priv = netdev_priv(dev); | |
1110 | struct resource *res; | |
1111 | ||
1112 | unregister_netdev(dev); | |
1113 | ||
1114 | platform_set_drvdata(pdev, NULL); | |
1115 | ||
1116 | free_netdev(dev); | |
1117 | ||
1118 | iounmap(priv->reg_base); | |
1119 | ||
1120 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
1121 | release_mem_region(res->start, resource_size(res)); | |
1122 | ||
1123 | clk_put(priv->clk); | |
1124 | ||
1125 | return 0; | |
1126 | } | |
1127 | ||
1128 | static struct platform_driver at91_can_driver = { | |
1129 | .probe = at91_can_probe, | |
1130 | .remove = __devexit_p(at91_can_remove), | |
1131 | .driver = { | |
1132 | .name = DRV_NAME, | |
1133 | .owner = THIS_MODULE, | |
1134 | }, | |
1135 | }; | |
1136 | ||
1137 | static int __init at91_can_module_init(void) | |
1138 | { | |
1139 | printk(KERN_INFO "%s netdevice driver\n", DRV_NAME); | |
1140 | return platform_driver_register(&at91_can_driver); | |
1141 | } | |
1142 | ||
1143 | static void __exit at91_can_module_exit(void) | |
1144 | { | |
1145 | platform_driver_unregister(&at91_can_driver); | |
1146 | printk(KERN_INFO "%s: driver removed\n", DRV_NAME); | |
1147 | } | |
1148 | ||
1149 | module_init(at91_can_module_init); | |
1150 | module_exit(at91_can_module_exit); | |
1151 | ||
1152 | MODULE_AUTHOR("Marc Kleine-Budde <mkl@pengutronix.de>"); | |
1153 | MODULE_LICENSE("GPL v2"); | |
1154 | MODULE_DESCRIPTION(DRV_NAME " CAN netdevice driver"); |