Commit | Line | Data |
---|---|---|
bc7f75fa AK |
1 | /******************************************************************************* |
2 | ||
3 | Intel PRO/1000 Linux driver | |
4 | Copyright(c) 1999 - 2007 Intel Corporation. | |
5 | ||
6 | This program is free software; you can redistribute it and/or modify it | |
7 | under the terms and conditions of the GNU General Public License, | |
8 | version 2, as published by the Free Software Foundation. | |
9 | ||
10 | This program is distributed in the hope it will be useful, but WITHOUT | |
11 | ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | |
12 | FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | |
13 | more details. | |
14 | ||
15 | You should have received a copy of the GNU General Public License along with | |
16 | this program; if not, write to the Free Software Foundation, Inc., | |
17 | 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. | |
18 | ||
19 | The full GNU General Public License is included in this distribution in | |
20 | the file called "COPYING". | |
21 | ||
22 | Contact Information: | |
23 | Linux NICS <linux.nics@intel.com> | |
24 | e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> | |
25 | Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 | |
26 | ||
27 | *******************************************************************************/ | |
28 | ||
29 | #include <linux/netdevice.h> | |
30 | #include <linux/ethtool.h> | |
31 | #include <linux/delay.h> | |
32 | #include <linux/pci.h> | |
33 | ||
34 | #include "e1000.h" | |
35 | ||
36 | enum e1000_mng_mode { | |
37 | e1000_mng_mode_none = 0, | |
38 | e1000_mng_mode_asf, | |
39 | e1000_mng_mode_pt, | |
40 | e1000_mng_mode_ipmi, | |
41 | e1000_mng_mode_host_if_only | |
42 | }; | |
43 | ||
44 | #define E1000_FACTPS_MNGCG 0x20000000 | |
45 | ||
46 | #define E1000_IAMT_SIGNATURE 0x544D4149 /* Intel(R) Active Management | |
47 | * Technology signature */ | |
48 | ||
49 | /** | |
50 | * e1000e_get_bus_info_pcie - Get PCIe bus information | |
51 | * @hw: pointer to the HW structure | |
52 | * | |
53 | * Determines and stores the system bus information for a particular | |
54 | * network interface. The following bus information is determined and stored: | |
55 | * bus speed, bus width, type (PCIe), and PCIe function. | |
56 | **/ | |
57 | s32 e1000e_get_bus_info_pcie(struct e1000_hw *hw) | |
58 | { | |
59 | struct e1000_bus_info *bus = &hw->bus; | |
60 | struct e1000_adapter *adapter = hw->adapter; | |
61 | u32 status; | |
62 | u16 pcie_link_status, pci_header_type, cap_offset; | |
63 | ||
64 | cap_offset = pci_find_capability(adapter->pdev, PCI_CAP_ID_EXP); | |
65 | if (!cap_offset) { | |
66 | bus->width = e1000_bus_width_unknown; | |
67 | } else { | |
68 | pci_read_config_word(adapter->pdev, | |
69 | cap_offset + PCIE_LINK_STATUS, | |
70 | &pcie_link_status); | |
71 | bus->width = (enum e1000_bus_width)((pcie_link_status & | |
72 | PCIE_LINK_WIDTH_MASK) >> | |
73 | PCIE_LINK_WIDTH_SHIFT); | |
74 | } | |
75 | ||
76 | pci_read_config_word(adapter->pdev, PCI_HEADER_TYPE_REGISTER, | |
77 | &pci_header_type); | |
78 | if (pci_header_type & PCI_HEADER_TYPE_MULTIFUNC) { | |
79 | status = er32(STATUS); | |
80 | bus->func = (status & E1000_STATUS_FUNC_MASK) | |
81 | >> E1000_STATUS_FUNC_SHIFT; | |
82 | } else { | |
83 | bus->func = 0; | |
84 | } | |
85 | ||
86 | return 0; | |
87 | } | |
88 | ||
89 | /** | |
90 | * e1000e_write_vfta - Write value to VLAN filter table | |
91 | * @hw: pointer to the HW structure | |
92 | * @offset: register offset in VLAN filter table | |
93 | * @value: register value written to VLAN filter table | |
94 | * | |
95 | * Writes value at the given offset in the register array which stores | |
96 | * the VLAN filter table. | |
97 | **/ | |
98 | void e1000e_write_vfta(struct e1000_hw *hw, u32 offset, u32 value) | |
99 | { | |
100 | E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, offset, value); | |
101 | e1e_flush(); | |
102 | } | |
103 | ||
104 | /** | |
105 | * e1000e_init_rx_addrs - Initialize receive address's | |
106 | * @hw: pointer to the HW structure | |
107 | * @rar_count: receive address registers | |
108 | * | |
109 | * Setups the receive address registers by setting the base receive address | |
110 | * register to the devices MAC address and clearing all the other receive | |
111 | * address registers to 0. | |
112 | **/ | |
113 | void e1000e_init_rx_addrs(struct e1000_hw *hw, u16 rar_count) | |
114 | { | |
115 | u32 i; | |
116 | ||
117 | /* Setup the receive address */ | |
118 | hw_dbg(hw, "Programming MAC Address into RAR[0]\n"); | |
119 | ||
120 | e1000e_rar_set(hw, hw->mac.addr, 0); | |
121 | ||
122 | /* Zero out the other (rar_entry_count - 1) receive addresses */ | |
123 | hw_dbg(hw, "Clearing RAR[1-%u]\n", rar_count-1); | |
124 | for (i = 1; i < rar_count; i++) { | |
125 | E1000_WRITE_REG_ARRAY(hw, E1000_RA, (i << 1), 0); | |
126 | e1e_flush(); | |
127 | E1000_WRITE_REG_ARRAY(hw, E1000_RA, ((i << 1) + 1), 0); | |
128 | e1e_flush(); | |
129 | } | |
130 | } | |
131 | ||
132 | /** | |
133 | * e1000e_rar_set - Set receive address register | |
134 | * @hw: pointer to the HW structure | |
135 | * @addr: pointer to the receive address | |
136 | * @index: receive address array register | |
137 | * | |
138 | * Sets the receive address array register at index to the address passed | |
139 | * in by addr. | |
140 | **/ | |
141 | void e1000e_rar_set(struct e1000_hw *hw, u8 *addr, u32 index) | |
142 | { | |
143 | u32 rar_low, rar_high; | |
144 | ||
145 | /* HW expects these in little endian so we reverse the byte order | |
146 | * from network order (big endian) to little endian | |
147 | */ | |
148 | rar_low = ((u32) addr[0] | | |
149 | ((u32) addr[1] << 8) | | |
150 | ((u32) addr[2] << 16) | ((u32) addr[3] << 24)); | |
151 | ||
152 | rar_high = ((u32) addr[4] | ((u32) addr[5] << 8)); | |
153 | ||
154 | rar_high |= E1000_RAH_AV; | |
155 | ||
156 | E1000_WRITE_REG_ARRAY(hw, E1000_RA, (index << 1), rar_low); | |
157 | E1000_WRITE_REG_ARRAY(hw, E1000_RA, ((index << 1) + 1), rar_high); | |
158 | } | |
159 | ||
160 | /** | |
161 | * e1000_mta_set - Set multicast filter table address | |
162 | * @hw: pointer to the HW structure | |
163 | * @hash_value: determines the MTA register and bit to set | |
164 | * | |
165 | * The multicast table address is a register array of 32-bit registers. | |
166 | * The hash_value is used to determine what register the bit is in, the | |
167 | * current value is read, the new bit is OR'd in and the new value is | |
168 | * written back into the register. | |
169 | **/ | |
170 | static void e1000_mta_set(struct e1000_hw *hw, u32 hash_value) | |
171 | { | |
172 | u32 hash_bit, hash_reg, mta; | |
173 | ||
174 | /* The MTA is a register array of 32-bit registers. It is | |
175 | * treated like an array of (32*mta_reg_count) bits. We want to | |
176 | * set bit BitArray[hash_value]. So we figure out what register | |
177 | * the bit is in, read it, OR in the new bit, then write | |
178 | * back the new value. The (hw->mac.mta_reg_count - 1) serves as a | |
179 | * mask to bits 31:5 of the hash value which gives us the | |
180 | * register we're modifying. The hash bit within that register | |
181 | * is determined by the lower 5 bits of the hash value. | |
182 | */ | |
183 | hash_reg = (hash_value >> 5) & (hw->mac.mta_reg_count - 1); | |
184 | hash_bit = hash_value & 0x1F; | |
185 | ||
186 | mta = E1000_READ_REG_ARRAY(hw, E1000_MTA, hash_reg); | |
187 | ||
188 | mta |= (1 << hash_bit); | |
189 | ||
190 | E1000_WRITE_REG_ARRAY(hw, E1000_MTA, hash_reg, mta); | |
191 | e1e_flush(); | |
192 | } | |
193 | ||
194 | /** | |
195 | * e1000_hash_mc_addr - Generate a multicast hash value | |
196 | * @hw: pointer to the HW structure | |
197 | * @mc_addr: pointer to a multicast address | |
198 | * | |
199 | * Generates a multicast address hash value which is used to determine | |
200 | * the multicast filter table array address and new table value. See | |
201 | * e1000_mta_set_generic() | |
202 | **/ | |
203 | static u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr) | |
204 | { | |
205 | u32 hash_value, hash_mask; | |
206 | u8 bit_shift = 0; | |
207 | ||
208 | /* Register count multiplied by bits per register */ | |
209 | hash_mask = (hw->mac.mta_reg_count * 32) - 1; | |
210 | ||
211 | /* For a mc_filter_type of 0, bit_shift is the number of left-shifts | |
212 | * where 0xFF would still fall within the hash mask. */ | |
213 | while (hash_mask >> bit_shift != 0xFF) | |
214 | bit_shift++; | |
215 | ||
216 | /* The portion of the address that is used for the hash table | |
217 | * is determined by the mc_filter_type setting. | |
218 | * The algorithm is such that there is a total of 8 bits of shifting. | |
219 | * The bit_shift for a mc_filter_type of 0 represents the number of | |
220 | * left-shifts where the MSB of mc_addr[5] would still fall within | |
221 | * the hash_mask. Case 0 does this exactly. Since there are a total | |
222 | * of 8 bits of shifting, then mc_addr[4] will shift right the | |
223 | * remaining number of bits. Thus 8 - bit_shift. The rest of the | |
224 | * cases are a variation of this algorithm...essentially raising the | |
225 | * number of bits to shift mc_addr[5] left, while still keeping the | |
226 | * 8-bit shifting total. | |
227 | */ | |
228 | /* For example, given the following Destination MAC Address and an | |
229 | * mta register count of 128 (thus a 4096-bit vector and 0xFFF mask), | |
230 | * we can see that the bit_shift for case 0 is 4. These are the hash | |
231 | * values resulting from each mc_filter_type... | |
232 | * [0] [1] [2] [3] [4] [5] | |
233 | * 01 AA 00 12 34 56 | |
234 | * LSB MSB | |
235 | * | |
236 | * case 0: hash_value = ((0x34 >> 4) | (0x56 << 4)) & 0xFFF = 0x563 | |
237 | * case 1: hash_value = ((0x34 >> 3) | (0x56 << 5)) & 0xFFF = 0xAC6 | |
238 | * case 2: hash_value = ((0x34 >> 2) | (0x56 << 6)) & 0xFFF = 0x163 | |
239 | * case 3: hash_value = ((0x34 >> 0) | (0x56 << 8)) & 0xFFF = 0x634 | |
240 | */ | |
241 | switch (hw->mac.mc_filter_type) { | |
242 | default: | |
243 | case 0: | |
244 | break; | |
245 | case 1: | |
246 | bit_shift += 1; | |
247 | break; | |
248 | case 2: | |
249 | bit_shift += 2; | |
250 | break; | |
251 | case 3: | |
252 | bit_shift += 4; | |
253 | break; | |
254 | } | |
255 | ||
256 | hash_value = hash_mask & (((mc_addr[4] >> (8 - bit_shift)) | | |
257 | (((u16) mc_addr[5]) << bit_shift))); | |
258 | ||
259 | return hash_value; | |
260 | } | |
261 | ||
262 | /** | |
263 | * e1000e_mc_addr_list_update_generic - Update Multicast addresses | |
264 | * @hw: pointer to the HW structure | |
265 | * @mc_addr_list: array of multicast addresses to program | |
266 | * @mc_addr_count: number of multicast addresses to program | |
267 | * @rar_used_count: the first RAR register free to program | |
268 | * @rar_count: total number of supported Receive Address Registers | |
269 | * | |
270 | * Updates the Receive Address Registers and Multicast Table Array. | |
271 | * The caller must have a packed mc_addr_list of multicast addresses. | |
272 | * The parameter rar_count will usually be hw->mac.rar_entry_count | |
273 | * unless there are workarounds that change this. | |
274 | **/ | |
275 | void e1000e_mc_addr_list_update_generic(struct e1000_hw *hw, | |
276 | u8 *mc_addr_list, u32 mc_addr_count, | |
277 | u32 rar_used_count, u32 rar_count) | |
278 | { | |
279 | u32 hash_value; | |
280 | u32 i; | |
281 | ||
282 | /* Load the first set of multicast addresses into the exact | |
283 | * filters (RAR). If there are not enough to fill the RAR | |
284 | * array, clear the filters. | |
285 | */ | |
286 | for (i = rar_used_count; i < rar_count; i++) { | |
287 | if (mc_addr_count) { | |
288 | e1000e_rar_set(hw, mc_addr_list, i); | |
289 | mc_addr_count--; | |
290 | mc_addr_list += ETH_ALEN; | |
291 | } else { | |
292 | E1000_WRITE_REG_ARRAY(hw, E1000_RA, i << 1, 0); | |
293 | e1e_flush(); | |
294 | E1000_WRITE_REG_ARRAY(hw, E1000_RA, (i << 1) + 1, 0); | |
295 | e1e_flush(); | |
296 | } | |
297 | } | |
298 | ||
299 | /* Clear the old settings from the MTA */ | |
300 | hw_dbg(hw, "Clearing MTA\n"); | |
301 | for (i = 0; i < hw->mac.mta_reg_count; i++) { | |
302 | E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0); | |
303 | e1e_flush(); | |
304 | } | |
305 | ||
306 | /* Load any remaining multicast addresses into the hash table. */ | |
307 | for (; mc_addr_count > 0; mc_addr_count--) { | |
308 | hash_value = e1000_hash_mc_addr(hw, mc_addr_list); | |
309 | hw_dbg(hw, "Hash value = 0x%03X\n", hash_value); | |
310 | e1000_mta_set(hw, hash_value); | |
311 | mc_addr_list += ETH_ALEN; | |
312 | } | |
313 | } | |
314 | ||
315 | /** | |
316 | * e1000e_clear_hw_cntrs_base - Clear base hardware counters | |
317 | * @hw: pointer to the HW structure | |
318 | * | |
319 | * Clears the base hardware counters by reading the counter registers. | |
320 | **/ | |
321 | void e1000e_clear_hw_cntrs_base(struct e1000_hw *hw) | |
322 | { | |
323 | u32 temp; | |
324 | ||
325 | temp = er32(CRCERRS); | |
326 | temp = er32(SYMERRS); | |
327 | temp = er32(MPC); | |
328 | temp = er32(SCC); | |
329 | temp = er32(ECOL); | |
330 | temp = er32(MCC); | |
331 | temp = er32(LATECOL); | |
332 | temp = er32(COLC); | |
333 | temp = er32(DC); | |
334 | temp = er32(SEC); | |
335 | temp = er32(RLEC); | |
336 | temp = er32(XONRXC); | |
337 | temp = er32(XONTXC); | |
338 | temp = er32(XOFFRXC); | |
339 | temp = er32(XOFFTXC); | |
340 | temp = er32(FCRUC); | |
341 | temp = er32(GPRC); | |
342 | temp = er32(BPRC); | |
343 | temp = er32(MPRC); | |
344 | temp = er32(GPTC); | |
345 | temp = er32(GORCL); | |
346 | temp = er32(GORCH); | |
347 | temp = er32(GOTCL); | |
348 | temp = er32(GOTCH); | |
349 | temp = er32(RNBC); | |
350 | temp = er32(RUC); | |
351 | temp = er32(RFC); | |
352 | temp = er32(ROC); | |
353 | temp = er32(RJC); | |
354 | temp = er32(TORL); | |
355 | temp = er32(TORH); | |
356 | temp = er32(TOTL); | |
357 | temp = er32(TOTH); | |
358 | temp = er32(TPR); | |
359 | temp = er32(TPT); | |
360 | temp = er32(MPTC); | |
361 | temp = er32(BPTC); | |
362 | } | |
363 | ||
364 | /** | |
365 | * e1000e_check_for_copper_link - Check for link (Copper) | |
366 | * @hw: pointer to the HW structure | |
367 | * | |
368 | * Checks to see of the link status of the hardware has changed. If a | |
369 | * change in link status has been detected, then we read the PHY registers | |
370 | * to get the current speed/duplex if link exists. | |
371 | **/ | |
372 | s32 e1000e_check_for_copper_link(struct e1000_hw *hw) | |
373 | { | |
374 | struct e1000_mac_info *mac = &hw->mac; | |
375 | s32 ret_val; | |
376 | bool link; | |
377 | ||
378 | /* We only want to go out to the PHY registers to see if Auto-Neg | |
379 | * has completed and/or if our link status has changed. The | |
380 | * get_link_status flag is set upon receiving a Link Status | |
381 | * Change or Rx Sequence Error interrupt. | |
382 | */ | |
383 | if (!mac->get_link_status) | |
384 | return 0; | |
385 | ||
386 | /* First we want to see if the MII Status Register reports | |
387 | * link. If so, then we want to get the current speed/duplex | |
388 | * of the PHY. | |
389 | */ | |
390 | ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link); | |
391 | if (ret_val) | |
392 | return ret_val; | |
393 | ||
394 | if (!link) | |
395 | return ret_val; /* No link detected */ | |
396 | ||
397 | mac->get_link_status = 0; | |
398 | ||
399 | /* Check if there was DownShift, must be checked | |
400 | * immediately after link-up */ | |
401 | e1000e_check_downshift(hw); | |
402 | ||
403 | /* If we are forcing speed/duplex, then we simply return since | |
404 | * we have already determined whether we have link or not. | |
405 | */ | |
406 | if (!mac->autoneg) { | |
407 | ret_val = -E1000_ERR_CONFIG; | |
408 | return ret_val; | |
409 | } | |
410 | ||
411 | /* Auto-Neg is enabled. Auto Speed Detection takes care | |
412 | * of MAC speed/duplex configuration. So we only need to | |
413 | * configure Collision Distance in the MAC. | |
414 | */ | |
415 | e1000e_config_collision_dist(hw); | |
416 | ||
417 | /* Configure Flow Control now that Auto-Neg has completed. | |
418 | * First, we need to restore the desired flow control | |
419 | * settings because we may have had to re-autoneg with a | |
420 | * different link partner. | |
421 | */ | |
422 | ret_val = e1000e_config_fc_after_link_up(hw); | |
423 | if (ret_val) { | |
424 | hw_dbg(hw, "Error configuring flow control\n"); | |
425 | } | |
426 | ||
427 | return ret_val; | |
428 | } | |
429 | ||
430 | /** | |
431 | * e1000e_check_for_fiber_link - Check for link (Fiber) | |
432 | * @hw: pointer to the HW structure | |
433 | * | |
434 | * Checks for link up on the hardware. If link is not up and we have | |
435 | * a signal, then we need to force link up. | |
436 | **/ | |
437 | s32 e1000e_check_for_fiber_link(struct e1000_hw *hw) | |
438 | { | |
439 | struct e1000_mac_info *mac = &hw->mac; | |
440 | u32 rxcw; | |
441 | u32 ctrl; | |
442 | u32 status; | |
443 | s32 ret_val; | |
444 | ||
445 | ctrl = er32(CTRL); | |
446 | status = er32(STATUS); | |
447 | rxcw = er32(RXCW); | |
448 | ||
449 | /* If we don't have link (auto-negotiation failed or link partner | |
450 | * cannot auto-negotiate), the cable is plugged in (we have signal), | |
451 | * and our link partner is not trying to auto-negotiate with us (we | |
452 | * are receiving idles or data), we need to force link up. We also | |
453 | * need to give auto-negotiation time to complete, in case the cable | |
454 | * was just plugged in. The autoneg_failed flag does this. | |
455 | */ | |
456 | /* (ctrl & E1000_CTRL_SWDPIN1) == 1 == have signal */ | |
457 | if ((ctrl & E1000_CTRL_SWDPIN1) && (!(status & E1000_STATUS_LU)) && | |
458 | (!(rxcw & E1000_RXCW_C))) { | |
459 | if (mac->autoneg_failed == 0) { | |
460 | mac->autoneg_failed = 1; | |
461 | return 0; | |
462 | } | |
463 | hw_dbg(hw, "NOT RXing /C/, disable AutoNeg and force link.\n"); | |
464 | ||
465 | /* Disable auto-negotiation in the TXCW register */ | |
466 | ew32(TXCW, (mac->txcw & ~E1000_TXCW_ANE)); | |
467 | ||
468 | /* Force link-up and also force full-duplex. */ | |
469 | ctrl = er32(CTRL); | |
470 | ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FD); | |
471 | ew32(CTRL, ctrl); | |
472 | ||
473 | /* Configure Flow Control after forcing link up. */ | |
474 | ret_val = e1000e_config_fc_after_link_up(hw); | |
475 | if (ret_val) { | |
476 | hw_dbg(hw, "Error configuring flow control\n"); | |
477 | return ret_val; | |
478 | } | |
479 | } else if ((ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) { | |
480 | /* If we are forcing link and we are receiving /C/ ordered | |
481 | * sets, re-enable auto-negotiation in the TXCW register | |
482 | * and disable forced link in the Device Control register | |
483 | * in an attempt to auto-negotiate with our link partner. | |
484 | */ | |
485 | hw_dbg(hw, "RXing /C/, enable AutoNeg and stop forcing link.\n"); | |
486 | ew32(TXCW, mac->txcw); | |
487 | ew32(CTRL, (ctrl & ~E1000_CTRL_SLU)); | |
488 | ||
489 | mac->serdes_has_link = 1; | |
490 | } | |
491 | ||
492 | return 0; | |
493 | } | |
494 | ||
495 | /** | |
496 | * e1000e_check_for_serdes_link - Check for link (Serdes) | |
497 | * @hw: pointer to the HW structure | |
498 | * | |
499 | * Checks for link up on the hardware. If link is not up and we have | |
500 | * a signal, then we need to force link up. | |
501 | **/ | |
502 | s32 e1000e_check_for_serdes_link(struct e1000_hw *hw) | |
503 | { | |
504 | struct e1000_mac_info *mac = &hw->mac; | |
505 | u32 rxcw; | |
506 | u32 ctrl; | |
507 | u32 status; | |
508 | s32 ret_val; | |
509 | ||
510 | ctrl = er32(CTRL); | |
511 | status = er32(STATUS); | |
512 | rxcw = er32(RXCW); | |
513 | ||
514 | /* If we don't have link (auto-negotiation failed or link partner | |
515 | * cannot auto-negotiate), and our link partner is not trying to | |
516 | * auto-negotiate with us (we are receiving idles or data), | |
517 | * we need to force link up. We also need to give auto-negotiation | |
518 | * time to complete. | |
519 | */ | |
520 | /* (ctrl & E1000_CTRL_SWDPIN1) == 1 == have signal */ | |
521 | if ((!(status & E1000_STATUS_LU)) && (!(rxcw & E1000_RXCW_C))) { | |
522 | if (mac->autoneg_failed == 0) { | |
523 | mac->autoneg_failed = 1; | |
524 | return 0; | |
525 | } | |
526 | hw_dbg(hw, "NOT RXing /C/, disable AutoNeg and force link.\n"); | |
527 | ||
528 | /* Disable auto-negotiation in the TXCW register */ | |
529 | ew32(TXCW, (mac->txcw & ~E1000_TXCW_ANE)); | |
530 | ||
531 | /* Force link-up and also force full-duplex. */ | |
532 | ctrl = er32(CTRL); | |
533 | ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FD); | |
534 | ew32(CTRL, ctrl); | |
535 | ||
536 | /* Configure Flow Control after forcing link up. */ | |
537 | ret_val = e1000e_config_fc_after_link_up(hw); | |
538 | if (ret_val) { | |
539 | hw_dbg(hw, "Error configuring flow control\n"); | |
540 | return ret_val; | |
541 | } | |
542 | } else if ((ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) { | |
543 | /* If we are forcing link and we are receiving /C/ ordered | |
544 | * sets, re-enable auto-negotiation in the TXCW register | |
545 | * and disable forced link in the Device Control register | |
546 | * in an attempt to auto-negotiate with our link partner. | |
547 | */ | |
548 | hw_dbg(hw, "RXing /C/, enable AutoNeg and stop forcing link.\n"); | |
549 | ew32(TXCW, mac->txcw); | |
550 | ew32(CTRL, (ctrl & ~E1000_CTRL_SLU)); | |
551 | ||
552 | mac->serdes_has_link = 1; | |
553 | } else if (!(E1000_TXCW_ANE & er32(TXCW))) { | |
554 | /* If we force link for non-auto-negotiation switch, check | |
555 | * link status based on MAC synchronization for internal | |
556 | * serdes media type. | |
557 | */ | |
558 | /* SYNCH bit and IV bit are sticky. */ | |
559 | udelay(10); | |
560 | if (E1000_RXCW_SYNCH & er32(RXCW)) { | |
561 | if (!(rxcw & E1000_RXCW_IV)) { | |
562 | mac->serdes_has_link = 1; | |
563 | hw_dbg(hw, "SERDES: Link is up.\n"); | |
564 | } | |
565 | } else { | |
566 | mac->serdes_has_link = 0; | |
567 | hw_dbg(hw, "SERDES: Link is down.\n"); | |
568 | } | |
569 | } | |
570 | ||
571 | if (E1000_TXCW_ANE & er32(TXCW)) { | |
572 | status = er32(STATUS); | |
573 | mac->serdes_has_link = (status & E1000_STATUS_LU); | |
574 | } | |
575 | ||
576 | return 0; | |
577 | } | |
578 | ||
579 | /** | |
580 | * e1000_set_default_fc_generic - Set flow control default values | |
581 | * @hw: pointer to the HW structure | |
582 | * | |
583 | * Read the EEPROM for the default values for flow control and store the | |
584 | * values. | |
585 | **/ | |
586 | static s32 e1000_set_default_fc_generic(struct e1000_hw *hw) | |
587 | { | |
588 | struct e1000_mac_info *mac = &hw->mac; | |
589 | s32 ret_val; | |
590 | u16 nvm_data; | |
591 | ||
bc7f75fa AK |
592 | /* Read and store word 0x0F of the EEPROM. This word contains bits |
593 | * that determine the hardware's default PAUSE (flow control) mode, | |
594 | * a bit that determines whether the HW defaults to enabling or | |
595 | * disabling auto-negotiation, and the direction of the | |
596 | * SW defined pins. If there is no SW over-ride of the flow | |
597 | * control setting, then the variable hw->fc will | |
598 | * be initialized based on a value in the EEPROM. | |
599 | */ | |
600 | ret_val = e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &nvm_data); | |
601 | ||
602 | if (ret_val) { | |
603 | hw_dbg(hw, "NVM Read Error\n"); | |
604 | return ret_val; | |
605 | } | |
606 | ||
607 | if ((nvm_data & NVM_WORD0F_PAUSE_MASK) == 0) | |
608 | mac->fc = e1000_fc_none; | |
609 | else if ((nvm_data & NVM_WORD0F_PAUSE_MASK) == | |
610 | NVM_WORD0F_ASM_DIR) | |
611 | mac->fc = e1000_fc_tx_pause; | |
612 | else | |
613 | mac->fc = e1000_fc_full; | |
614 | ||
615 | return 0; | |
616 | } | |
617 | ||
618 | /** | |
619 | * e1000e_setup_link - Setup flow control and link settings | |
620 | * @hw: pointer to the HW structure | |
621 | * | |
622 | * Determines which flow control settings to use, then configures flow | |
623 | * control. Calls the appropriate media-specific link configuration | |
624 | * function. Assuming the adapter has a valid link partner, a valid link | |
625 | * should be established. Assumes the hardware has previously been reset | |
626 | * and the transmitter and receiver are not enabled. | |
627 | **/ | |
628 | s32 e1000e_setup_link(struct e1000_hw *hw) | |
629 | { | |
630 | struct e1000_mac_info *mac = &hw->mac; | |
631 | s32 ret_val; | |
632 | ||
633 | /* In the case of the phy reset being blocked, we already have a link. | |
634 | * We do not need to set it up again. | |
635 | */ | |
636 | if (e1000_check_reset_block(hw)) | |
637 | return 0; | |
638 | ||
309af40b AK |
639 | /* |
640 | * If flow control is set to default, set flow control based on | |
641 | * the EEPROM flow control settings. | |
642 | */ | |
643 | if (mac->fc == e1000_fc_default) { | |
644 | ret_val = e1000_set_default_fc_generic(hw); | |
645 | if (ret_val) | |
646 | return ret_val; | |
647 | } | |
bc7f75fa AK |
648 | |
649 | /* We want to save off the original Flow Control configuration just | |
650 | * in case we get disconnected and then reconnected into a different | |
651 | * hub or switch with different Flow Control capabilities. | |
652 | */ | |
653 | mac->original_fc = mac->fc; | |
654 | ||
655 | hw_dbg(hw, "After fix-ups FlowControl is now = %x\n", mac->fc); | |
656 | ||
657 | /* Call the necessary media_type subroutine to configure the link. */ | |
658 | ret_val = mac->ops.setup_physical_interface(hw); | |
659 | if (ret_val) | |
660 | return ret_val; | |
661 | ||
662 | /* Initialize the flow control address, type, and PAUSE timer | |
663 | * registers to their default values. This is done even if flow | |
664 | * control is disabled, because it does not hurt anything to | |
665 | * initialize these registers. | |
666 | */ | |
667 | hw_dbg(hw, "Initializing the Flow Control address, type and timer regs\n"); | |
668 | ew32(FCT, FLOW_CONTROL_TYPE); | |
669 | ew32(FCAH, FLOW_CONTROL_ADDRESS_HIGH); | |
670 | ew32(FCAL, FLOW_CONTROL_ADDRESS_LOW); | |
671 | ||
672 | ew32(FCTTV, mac->fc_pause_time); | |
673 | ||
674 | return e1000e_set_fc_watermarks(hw); | |
675 | } | |
676 | ||
677 | /** | |
678 | * e1000_commit_fc_settings_generic - Configure flow control | |
679 | * @hw: pointer to the HW structure | |
680 | * | |
681 | * Write the flow control settings to the Transmit Config Word Register (TXCW) | |
682 | * base on the flow control settings in e1000_mac_info. | |
683 | **/ | |
684 | static s32 e1000_commit_fc_settings_generic(struct e1000_hw *hw) | |
685 | { | |
686 | struct e1000_mac_info *mac = &hw->mac; | |
687 | u32 txcw; | |
688 | ||
689 | /* Check for a software override of the flow control settings, and | |
690 | * setup the device accordingly. If auto-negotiation is enabled, then | |
691 | * software will have to set the "PAUSE" bits to the correct value in | |
692 | * the Transmit Config Word Register (TXCW) and re-start auto- | |
693 | * negotiation. However, if auto-negotiation is disabled, then | |
694 | * software will have to manually configure the two flow control enable | |
695 | * bits in the CTRL register. | |
696 | * | |
697 | * The possible values of the "fc" parameter are: | |
698 | * 0: Flow control is completely disabled | |
699 | * 1: Rx flow control is enabled (we can receive pause frames, | |
700 | * but not send pause frames). | |
701 | * 2: Tx flow control is enabled (we can send pause frames but we | |
702 | * do not support receiving pause frames). | |
703 | * 3: Both Rx and TX flow control (symmetric) are enabled. | |
704 | */ | |
705 | switch (mac->fc) { | |
706 | case e1000_fc_none: | |
707 | /* Flow control completely disabled by a software over-ride. */ | |
708 | txcw = (E1000_TXCW_ANE | E1000_TXCW_FD); | |
709 | break; | |
710 | case e1000_fc_rx_pause: | |
711 | /* RX Flow control is enabled and TX Flow control is disabled | |
712 | * by a software over-ride. Since there really isn't a way to | |
713 | * advertise that we are capable of RX Pause ONLY, we will | |
714 | * advertise that we support both symmetric and asymmetric RX | |
715 | * PAUSE. Later, we will disable the adapter's ability to send | |
716 | * PAUSE frames. | |
717 | */ | |
718 | txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK); | |
719 | break; | |
720 | case e1000_fc_tx_pause: | |
721 | /* TX Flow control is enabled, and RX Flow control is disabled, | |
722 | * by a software over-ride. | |
723 | */ | |
724 | txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_ASM_DIR); | |
725 | break; | |
726 | case e1000_fc_full: | |
727 | /* Flow control (both RX and TX) is enabled by a software | |
728 | * over-ride. | |
729 | */ | |
730 | txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK); | |
731 | break; | |
732 | default: | |
733 | hw_dbg(hw, "Flow control param set incorrectly\n"); | |
734 | return -E1000_ERR_CONFIG; | |
735 | break; | |
736 | } | |
737 | ||
738 | ew32(TXCW, txcw); | |
739 | mac->txcw = txcw; | |
740 | ||
741 | return 0; | |
742 | } | |
743 | ||
744 | /** | |
745 | * e1000_poll_fiber_serdes_link_generic - Poll for link up | |
746 | * @hw: pointer to the HW structure | |
747 | * | |
748 | * Polls for link up by reading the status register, if link fails to come | |
749 | * up with auto-negotiation, then the link is forced if a signal is detected. | |
750 | **/ | |
751 | static s32 e1000_poll_fiber_serdes_link_generic(struct e1000_hw *hw) | |
752 | { | |
753 | struct e1000_mac_info *mac = &hw->mac; | |
754 | u32 i, status; | |
755 | s32 ret_val; | |
756 | ||
757 | /* If we have a signal (the cable is plugged in, or assumed true for | |
758 | * serdes media) then poll for a "Link-Up" indication in the Device | |
759 | * Status Register. Time-out if a link isn't seen in 500 milliseconds | |
760 | * seconds (Auto-negotiation should complete in less than 500 | |
761 | * milliseconds even if the other end is doing it in SW). | |
762 | */ | |
763 | for (i = 0; i < FIBER_LINK_UP_LIMIT; i++) { | |
764 | msleep(10); | |
765 | status = er32(STATUS); | |
766 | if (status & E1000_STATUS_LU) | |
767 | break; | |
768 | } | |
769 | if (i == FIBER_LINK_UP_LIMIT) { | |
770 | hw_dbg(hw, "Never got a valid link from auto-neg!!!\n"); | |
771 | mac->autoneg_failed = 1; | |
772 | /* AutoNeg failed to achieve a link, so we'll call | |
773 | * mac->check_for_link. This routine will force the | |
774 | * link up if we detect a signal. This will allow us to | |
775 | * communicate with non-autonegotiating link partners. | |
776 | */ | |
777 | ret_val = mac->ops.check_for_link(hw); | |
778 | if (ret_val) { | |
779 | hw_dbg(hw, "Error while checking for link\n"); | |
780 | return ret_val; | |
781 | } | |
782 | mac->autoneg_failed = 0; | |
783 | } else { | |
784 | mac->autoneg_failed = 0; | |
785 | hw_dbg(hw, "Valid Link Found\n"); | |
786 | } | |
787 | ||
788 | return 0; | |
789 | } | |
790 | ||
791 | /** | |
792 | * e1000e_setup_fiber_serdes_link - Setup link for fiber/serdes | |
793 | * @hw: pointer to the HW structure | |
794 | * | |
795 | * Configures collision distance and flow control for fiber and serdes | |
796 | * links. Upon successful setup, poll for link. | |
797 | **/ | |
798 | s32 e1000e_setup_fiber_serdes_link(struct e1000_hw *hw) | |
799 | { | |
800 | u32 ctrl; | |
801 | s32 ret_val; | |
802 | ||
803 | ctrl = er32(CTRL); | |
804 | ||
805 | /* Take the link out of reset */ | |
806 | ctrl &= ~E1000_CTRL_LRST; | |
807 | ||
808 | e1000e_config_collision_dist(hw); | |
809 | ||
810 | ret_val = e1000_commit_fc_settings_generic(hw); | |
811 | if (ret_val) | |
812 | return ret_val; | |
813 | ||
814 | /* Since auto-negotiation is enabled, take the link out of reset (the | |
815 | * link will be in reset, because we previously reset the chip). This | |
816 | * will restart auto-negotiation. If auto-negotiation is successful | |
817 | * then the link-up status bit will be set and the flow control enable | |
818 | * bits (RFCE and TFCE) will be set according to their negotiated value. | |
819 | */ | |
820 | hw_dbg(hw, "Auto-negotiation enabled\n"); | |
821 | ||
822 | ew32(CTRL, ctrl); | |
823 | e1e_flush(); | |
824 | msleep(1); | |
825 | ||
826 | /* For these adapters, the SW defineable pin 1 is set when the optics | |
827 | * detect a signal. If we have a signal, then poll for a "Link-Up" | |
828 | * indication. | |
829 | */ | |
830 | if (hw->media_type == e1000_media_type_internal_serdes || | |
831 | (er32(CTRL) & E1000_CTRL_SWDPIN1)) { | |
832 | ret_val = e1000_poll_fiber_serdes_link_generic(hw); | |
833 | } else { | |
834 | hw_dbg(hw, "No signal detected\n"); | |
835 | } | |
836 | ||
837 | return 0; | |
838 | } | |
839 | ||
840 | /** | |
841 | * e1000e_config_collision_dist - Configure collision distance | |
842 | * @hw: pointer to the HW structure | |
843 | * | |
844 | * Configures the collision distance to the default value and is used | |
845 | * during link setup. Currently no func pointer exists and all | |
846 | * implementations are handled in the generic version of this function. | |
847 | **/ | |
848 | void e1000e_config_collision_dist(struct e1000_hw *hw) | |
849 | { | |
850 | u32 tctl; | |
851 | ||
852 | tctl = er32(TCTL); | |
853 | ||
854 | tctl &= ~E1000_TCTL_COLD; | |
855 | tctl |= E1000_COLLISION_DISTANCE << E1000_COLD_SHIFT; | |
856 | ||
857 | ew32(TCTL, tctl); | |
858 | e1e_flush(); | |
859 | } | |
860 | ||
861 | /** | |
862 | * e1000e_set_fc_watermarks - Set flow control high/low watermarks | |
863 | * @hw: pointer to the HW structure | |
864 | * | |
865 | * Sets the flow control high/low threshold (watermark) registers. If | |
866 | * flow control XON frame transmission is enabled, then set XON frame | |
867 | * tansmission as well. | |
868 | **/ | |
869 | s32 e1000e_set_fc_watermarks(struct e1000_hw *hw) | |
870 | { | |
871 | struct e1000_mac_info *mac = &hw->mac; | |
872 | u32 fcrtl = 0, fcrth = 0; | |
873 | ||
874 | /* Set the flow control receive threshold registers. Normally, | |
875 | * these registers will be set to a default threshold that may be | |
876 | * adjusted later by the driver's runtime code. However, if the | |
877 | * ability to transmit pause frames is not enabled, then these | |
878 | * registers will be set to 0. | |
879 | */ | |
880 | if (mac->fc & e1000_fc_tx_pause) { | |
881 | /* We need to set up the Receive Threshold high and low water | |
882 | * marks as well as (optionally) enabling the transmission of | |
883 | * XON frames. | |
884 | */ | |
885 | fcrtl = mac->fc_low_water; | |
886 | fcrtl |= E1000_FCRTL_XONE; | |
887 | fcrth = mac->fc_high_water; | |
888 | } | |
889 | ew32(FCRTL, fcrtl); | |
890 | ew32(FCRTH, fcrth); | |
891 | ||
892 | return 0; | |
893 | } | |
894 | ||
895 | /** | |
896 | * e1000e_force_mac_fc - Force the MAC's flow control settings | |
897 | * @hw: pointer to the HW structure | |
898 | * | |
899 | * Force the MAC's flow control settings. Sets the TFCE and RFCE bits in the | |
900 | * device control register to reflect the adapter settings. TFCE and RFCE | |
901 | * need to be explicitly set by software when a copper PHY is used because | |
902 | * autonegotiation is managed by the PHY rather than the MAC. Software must | |
903 | * also configure these bits when link is forced on a fiber connection. | |
904 | **/ | |
905 | s32 e1000e_force_mac_fc(struct e1000_hw *hw) | |
906 | { | |
907 | struct e1000_mac_info *mac = &hw->mac; | |
908 | u32 ctrl; | |
909 | ||
910 | ctrl = er32(CTRL); | |
911 | ||
912 | /* Because we didn't get link via the internal auto-negotiation | |
913 | * mechanism (we either forced link or we got link via PHY | |
914 | * auto-neg), we have to manually enable/disable transmit an | |
915 | * receive flow control. | |
916 | * | |
917 | * The "Case" statement below enables/disable flow control | |
918 | * according to the "mac->fc" parameter. | |
919 | * | |
920 | * The possible values of the "fc" parameter are: | |
921 | * 0: Flow control is completely disabled | |
922 | * 1: Rx flow control is enabled (we can receive pause | |
923 | * frames but not send pause frames). | |
924 | * 2: Tx flow control is enabled (we can send pause frames | |
925 | * frames but we do not receive pause frames). | |
926 | * 3: Both Rx and TX flow control (symmetric) is enabled. | |
927 | * other: No other values should be possible at this point. | |
928 | */ | |
929 | hw_dbg(hw, "mac->fc = %u\n", mac->fc); | |
930 | ||
931 | switch (mac->fc) { | |
932 | case e1000_fc_none: | |
933 | ctrl &= (~(E1000_CTRL_TFCE | E1000_CTRL_RFCE)); | |
934 | break; | |
935 | case e1000_fc_rx_pause: | |
936 | ctrl &= (~E1000_CTRL_TFCE); | |
937 | ctrl |= E1000_CTRL_RFCE; | |
938 | break; | |
939 | case e1000_fc_tx_pause: | |
940 | ctrl &= (~E1000_CTRL_RFCE); | |
941 | ctrl |= E1000_CTRL_TFCE; | |
942 | break; | |
943 | case e1000_fc_full: | |
944 | ctrl |= (E1000_CTRL_TFCE | E1000_CTRL_RFCE); | |
945 | break; | |
946 | default: | |
947 | hw_dbg(hw, "Flow control param set incorrectly\n"); | |
948 | return -E1000_ERR_CONFIG; | |
949 | } | |
950 | ||
951 | ew32(CTRL, ctrl); | |
952 | ||
953 | return 0; | |
954 | } | |
955 | ||
956 | /** | |
957 | * e1000e_config_fc_after_link_up - Configures flow control after link | |
958 | * @hw: pointer to the HW structure | |
959 | * | |
960 | * Checks the status of auto-negotiation after link up to ensure that the | |
961 | * speed and duplex were not forced. If the link needed to be forced, then | |
962 | * flow control needs to be forced also. If auto-negotiation is enabled | |
963 | * and did not fail, then we configure flow control based on our link | |
964 | * partner. | |
965 | **/ | |
966 | s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) | |
967 | { | |
968 | struct e1000_mac_info *mac = &hw->mac; | |
969 | s32 ret_val = 0; | |
970 | u16 mii_status_reg, mii_nway_adv_reg, mii_nway_lp_ability_reg; | |
971 | u16 speed, duplex; | |
972 | ||
973 | /* Check for the case where we have fiber media and auto-neg failed | |
974 | * so we had to force link. In this case, we need to force the | |
975 | * configuration of the MAC to match the "fc" parameter. | |
976 | */ | |
977 | if (mac->autoneg_failed) { | |
978 | if (hw->media_type == e1000_media_type_fiber || | |
979 | hw->media_type == e1000_media_type_internal_serdes) | |
980 | ret_val = e1000e_force_mac_fc(hw); | |
981 | } else { | |
982 | if (hw->media_type == e1000_media_type_copper) | |
983 | ret_val = e1000e_force_mac_fc(hw); | |
984 | } | |
985 | ||
986 | if (ret_val) { | |
987 | hw_dbg(hw, "Error forcing flow control settings\n"); | |
988 | return ret_val; | |
989 | } | |
990 | ||
991 | /* Check for the case where we have copper media and auto-neg is | |
992 | * enabled. In this case, we need to check and see if Auto-Neg | |
993 | * has completed, and if so, how the PHY and link partner has | |
994 | * flow control configured. | |
995 | */ | |
996 | if ((hw->media_type == e1000_media_type_copper) && mac->autoneg) { | |
997 | /* Read the MII Status Register and check to see if AutoNeg | |
998 | * has completed. We read this twice because this reg has | |
999 | * some "sticky" (latched) bits. | |
1000 | */ | |
1001 | ret_val = e1e_rphy(hw, PHY_STATUS, &mii_status_reg); | |
1002 | if (ret_val) | |
1003 | return ret_val; | |
1004 | ret_val = e1e_rphy(hw, PHY_STATUS, &mii_status_reg); | |
1005 | if (ret_val) | |
1006 | return ret_val; | |
1007 | ||
1008 | if (!(mii_status_reg & MII_SR_AUTONEG_COMPLETE)) { | |
1009 | hw_dbg(hw, "Copper PHY and Auto Neg " | |
1010 | "has not completed.\n"); | |
1011 | return ret_val; | |
1012 | } | |
1013 | ||
1014 | /* The AutoNeg process has completed, so we now need to | |
1015 | * read both the Auto Negotiation Advertisement | |
1016 | * Register (Address 4) and the Auto_Negotiation Base | |
1017 | * Page Ability Register (Address 5) to determine how | |
1018 | * flow control was negotiated. | |
1019 | */ | |
1020 | ret_val = e1e_rphy(hw, PHY_AUTONEG_ADV, &mii_nway_adv_reg); | |
1021 | if (ret_val) | |
1022 | return ret_val; | |
1023 | ret_val = e1e_rphy(hw, PHY_LP_ABILITY, &mii_nway_lp_ability_reg); | |
1024 | if (ret_val) | |
1025 | return ret_val; | |
1026 | ||
1027 | /* Two bits in the Auto Negotiation Advertisement Register | |
1028 | * (Address 4) and two bits in the Auto Negotiation Base | |
1029 | * Page Ability Register (Address 5) determine flow control | |
1030 | * for both the PHY and the link partner. The following | |
1031 | * table, taken out of the IEEE 802.3ab/D6.0 dated March 25, | |
1032 | * 1999, describes these PAUSE resolution bits and how flow | |
1033 | * control is determined based upon these settings. | |
1034 | * NOTE: DC = Don't Care | |
1035 | * | |
1036 | * LOCAL DEVICE | LINK PARTNER | |
1037 | * PAUSE | ASM_DIR | PAUSE | ASM_DIR | NIC Resolution | |
1038 | *-------|---------|-------|---------|-------------------- | |
1039 | * 0 | 0 | DC | DC | e1000_fc_none | |
1040 | * 0 | 1 | 0 | DC | e1000_fc_none | |
1041 | * 0 | 1 | 1 | 0 | e1000_fc_none | |
1042 | * 0 | 1 | 1 | 1 | e1000_fc_tx_pause | |
1043 | * 1 | 0 | 0 | DC | e1000_fc_none | |
1044 | * 1 | DC | 1 | DC | e1000_fc_full | |
1045 | * 1 | 1 | 0 | 0 | e1000_fc_none | |
1046 | * 1 | 1 | 0 | 1 | e1000_fc_rx_pause | |
1047 | * | |
1048 | */ | |
1049 | /* Are both PAUSE bits set to 1? If so, this implies | |
1050 | * Symmetric Flow Control is enabled at both ends. The | |
1051 | * ASM_DIR bits are irrelevant per the spec. | |
1052 | * | |
1053 | * For Symmetric Flow Control: | |
1054 | * | |
1055 | * LOCAL DEVICE | LINK PARTNER | |
1056 | * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result | |
1057 | *-------|---------|-------|---------|-------------------- | |
1058 | * 1 | DC | 1 | DC | E1000_fc_full | |
1059 | * | |
1060 | */ | |
1061 | if ((mii_nway_adv_reg & NWAY_AR_PAUSE) && | |
1062 | (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE)) { | |
1063 | /* Now we need to check if the user selected RX ONLY | |
1064 | * of pause frames. In this case, we had to advertise | |
1065 | * FULL flow control because we could not advertise RX | |
1066 | * ONLY. Hence, we must now check to see if we need to | |
1067 | * turn OFF the TRANSMISSION of PAUSE frames. | |
1068 | */ | |
1069 | if (mac->original_fc == e1000_fc_full) { | |
1070 | mac->fc = e1000_fc_full; | |
1071 | hw_dbg(hw, "Flow Control = FULL.\r\n"); | |
1072 | } else { | |
1073 | mac->fc = e1000_fc_rx_pause; | |
1074 | hw_dbg(hw, "Flow Control = " | |
1075 | "RX PAUSE frames only.\r\n"); | |
1076 | } | |
1077 | } | |
1078 | /* For receiving PAUSE frames ONLY. | |
1079 | * | |
1080 | * LOCAL DEVICE | LINK PARTNER | |
1081 | * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result | |
1082 | *-------|---------|-------|---------|-------------------- | |
1083 | * 0 | 1 | 1 | 1 | e1000_fc_tx_pause | |
1084 | * | |
1085 | */ | |
1086 | else if (!(mii_nway_adv_reg & NWAY_AR_PAUSE) && | |
1087 | (mii_nway_adv_reg & NWAY_AR_ASM_DIR) && | |
1088 | (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && | |
1089 | (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { | |
1090 | mac->fc = e1000_fc_tx_pause; | |
1091 | hw_dbg(hw, "Flow Control = TX PAUSE frames only.\r\n"); | |
1092 | } | |
1093 | /* For transmitting PAUSE frames ONLY. | |
1094 | * | |
1095 | * LOCAL DEVICE | LINK PARTNER | |
1096 | * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result | |
1097 | *-------|---------|-------|---------|-------------------- | |
1098 | * 1 | 1 | 0 | 1 | e1000_fc_rx_pause | |
1099 | * | |
1100 | */ | |
1101 | else if ((mii_nway_adv_reg & NWAY_AR_PAUSE) && | |
1102 | (mii_nway_adv_reg & NWAY_AR_ASM_DIR) && | |
1103 | !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && | |
1104 | (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { | |
1105 | mac->fc = e1000_fc_rx_pause; | |
1106 | hw_dbg(hw, "Flow Control = RX PAUSE frames only.\r\n"); | |
de92d84e JB |
1107 | } else { |
1108 | /* | |
1109 | * Per the IEEE spec, at this point flow control | |
1110 | * should be disabled. | |
1111 | */ | |
bc7f75fa AK |
1112 | mac->fc = e1000_fc_none; |
1113 | hw_dbg(hw, "Flow Control = NONE.\r\n"); | |
bc7f75fa AK |
1114 | } |
1115 | ||
1116 | /* Now we need to do one last check... If we auto- | |
1117 | * negotiated to HALF DUPLEX, flow control should not be | |
1118 | * enabled per IEEE 802.3 spec. | |
1119 | */ | |
1120 | ret_val = mac->ops.get_link_up_info(hw, &speed, &duplex); | |
1121 | if (ret_val) { | |
1122 | hw_dbg(hw, "Error getting link speed and duplex\n"); | |
1123 | return ret_val; | |
1124 | } | |
1125 | ||
1126 | if (duplex == HALF_DUPLEX) | |
1127 | mac->fc = e1000_fc_none; | |
1128 | ||
1129 | /* Now we call a subroutine to actually force the MAC | |
1130 | * controller to use the correct flow control settings. | |
1131 | */ | |
1132 | ret_val = e1000e_force_mac_fc(hw); | |
1133 | if (ret_val) { | |
1134 | hw_dbg(hw, "Error forcing flow control settings\n"); | |
1135 | return ret_val; | |
1136 | } | |
1137 | } | |
1138 | ||
1139 | return 0; | |
1140 | } | |
1141 | ||
1142 | /** | |
489815ce | 1143 | * e1000e_get_speed_and_duplex_copper - Retrieve current speed/duplex |
bc7f75fa AK |
1144 | * @hw: pointer to the HW structure |
1145 | * @speed: stores the current speed | |
1146 | * @duplex: stores the current duplex | |
1147 | * | |
1148 | * Read the status register for the current speed/duplex and store the current | |
1149 | * speed and duplex for copper connections. | |
1150 | **/ | |
1151 | s32 e1000e_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed, u16 *duplex) | |
1152 | { | |
1153 | u32 status; | |
1154 | ||
1155 | status = er32(STATUS); | |
1156 | if (status & E1000_STATUS_SPEED_1000) { | |
1157 | *speed = SPEED_1000; | |
1158 | hw_dbg(hw, "1000 Mbs, "); | |
1159 | } else if (status & E1000_STATUS_SPEED_100) { | |
1160 | *speed = SPEED_100; | |
1161 | hw_dbg(hw, "100 Mbs, "); | |
1162 | } else { | |
1163 | *speed = SPEED_10; | |
1164 | hw_dbg(hw, "10 Mbs, "); | |
1165 | } | |
1166 | ||
1167 | if (status & E1000_STATUS_FD) { | |
1168 | *duplex = FULL_DUPLEX; | |
1169 | hw_dbg(hw, "Full Duplex\n"); | |
1170 | } else { | |
1171 | *duplex = HALF_DUPLEX; | |
1172 | hw_dbg(hw, "Half Duplex\n"); | |
1173 | } | |
1174 | ||
1175 | return 0; | |
1176 | } | |
1177 | ||
1178 | /** | |
489815ce | 1179 | * e1000e_get_speed_and_duplex_fiber_serdes - Retrieve current speed/duplex |
bc7f75fa AK |
1180 | * @hw: pointer to the HW structure |
1181 | * @speed: stores the current speed | |
1182 | * @duplex: stores the current duplex | |
1183 | * | |
1184 | * Sets the speed and duplex to gigabit full duplex (the only possible option) | |
1185 | * for fiber/serdes links. | |
1186 | **/ | |
1187 | s32 e1000e_get_speed_and_duplex_fiber_serdes(struct e1000_hw *hw, u16 *speed, u16 *duplex) | |
1188 | { | |
1189 | *speed = SPEED_1000; | |
1190 | *duplex = FULL_DUPLEX; | |
1191 | ||
1192 | return 0; | |
1193 | } | |
1194 | ||
1195 | /** | |
1196 | * e1000e_get_hw_semaphore - Acquire hardware semaphore | |
1197 | * @hw: pointer to the HW structure | |
1198 | * | |
1199 | * Acquire the HW semaphore to access the PHY or NVM | |
1200 | **/ | |
1201 | s32 e1000e_get_hw_semaphore(struct e1000_hw *hw) | |
1202 | { | |
1203 | u32 swsm; | |
1204 | s32 timeout = hw->nvm.word_size + 1; | |
1205 | s32 i = 0; | |
1206 | ||
1207 | /* Get the SW semaphore */ | |
1208 | while (i < timeout) { | |
1209 | swsm = er32(SWSM); | |
1210 | if (!(swsm & E1000_SWSM_SMBI)) | |
1211 | break; | |
1212 | ||
1213 | udelay(50); | |
1214 | i++; | |
1215 | } | |
1216 | ||
1217 | if (i == timeout) { | |
1218 | hw_dbg(hw, "Driver can't access device - SMBI bit is set.\n"); | |
1219 | return -E1000_ERR_NVM; | |
1220 | } | |
1221 | ||
1222 | /* Get the FW semaphore. */ | |
1223 | for (i = 0; i < timeout; i++) { | |
1224 | swsm = er32(SWSM); | |
1225 | ew32(SWSM, swsm | E1000_SWSM_SWESMBI); | |
1226 | ||
1227 | /* Semaphore acquired if bit latched */ | |
1228 | if (er32(SWSM) & E1000_SWSM_SWESMBI) | |
1229 | break; | |
1230 | ||
1231 | udelay(50); | |
1232 | } | |
1233 | ||
1234 | if (i == timeout) { | |
1235 | /* Release semaphores */ | |
1236 | e1000e_put_hw_semaphore(hw); | |
1237 | hw_dbg(hw, "Driver can't access the NVM\n"); | |
1238 | return -E1000_ERR_NVM; | |
1239 | } | |
1240 | ||
1241 | return 0; | |
1242 | } | |
1243 | ||
1244 | /** | |
1245 | * e1000e_put_hw_semaphore - Release hardware semaphore | |
1246 | * @hw: pointer to the HW structure | |
1247 | * | |
1248 | * Release hardware semaphore used to access the PHY or NVM | |
1249 | **/ | |
1250 | void e1000e_put_hw_semaphore(struct e1000_hw *hw) | |
1251 | { | |
1252 | u32 swsm; | |
1253 | ||
1254 | swsm = er32(SWSM); | |
1255 | swsm &= ~(E1000_SWSM_SMBI | E1000_SWSM_SWESMBI); | |
1256 | ew32(SWSM, swsm); | |
1257 | } | |
1258 | ||
1259 | /** | |
1260 | * e1000e_get_auto_rd_done - Check for auto read completion | |
1261 | * @hw: pointer to the HW structure | |
1262 | * | |
1263 | * Check EEPROM for Auto Read done bit. | |
1264 | **/ | |
1265 | s32 e1000e_get_auto_rd_done(struct e1000_hw *hw) | |
1266 | { | |
1267 | s32 i = 0; | |
1268 | ||
1269 | while (i < AUTO_READ_DONE_TIMEOUT) { | |
1270 | if (er32(EECD) & E1000_EECD_AUTO_RD) | |
1271 | break; | |
1272 | msleep(1); | |
1273 | i++; | |
1274 | } | |
1275 | ||
1276 | if (i == AUTO_READ_DONE_TIMEOUT) { | |
1277 | hw_dbg(hw, "Auto read by HW from NVM has not completed.\n"); | |
1278 | return -E1000_ERR_RESET; | |
1279 | } | |
1280 | ||
1281 | return 0; | |
1282 | } | |
1283 | ||
1284 | /** | |
1285 | * e1000e_valid_led_default - Verify a valid default LED config | |
1286 | * @hw: pointer to the HW structure | |
1287 | * @data: pointer to the NVM (EEPROM) | |
1288 | * | |
1289 | * Read the EEPROM for the current default LED configuration. If the | |
1290 | * LED configuration is not valid, set to a valid LED configuration. | |
1291 | **/ | |
1292 | s32 e1000e_valid_led_default(struct e1000_hw *hw, u16 *data) | |
1293 | { | |
1294 | s32 ret_val; | |
1295 | ||
1296 | ret_val = e1000_read_nvm(hw, NVM_ID_LED_SETTINGS, 1, data); | |
1297 | if (ret_val) { | |
1298 | hw_dbg(hw, "NVM Read Error\n"); | |
1299 | return ret_val; | |
1300 | } | |
1301 | ||
1302 | if (*data == ID_LED_RESERVED_0000 || *data == ID_LED_RESERVED_FFFF) | |
1303 | *data = ID_LED_DEFAULT; | |
1304 | ||
1305 | return 0; | |
1306 | } | |
1307 | ||
1308 | /** | |
1309 | * e1000e_id_led_init - | |
1310 | * @hw: pointer to the HW structure | |
1311 | * | |
1312 | **/ | |
1313 | s32 e1000e_id_led_init(struct e1000_hw *hw) | |
1314 | { | |
1315 | struct e1000_mac_info *mac = &hw->mac; | |
1316 | s32 ret_val; | |
1317 | const u32 ledctl_mask = 0x000000FF; | |
1318 | const u32 ledctl_on = E1000_LEDCTL_MODE_LED_ON; | |
1319 | const u32 ledctl_off = E1000_LEDCTL_MODE_LED_OFF; | |
1320 | u16 data, i, temp; | |
1321 | const u16 led_mask = 0x0F; | |
1322 | ||
1323 | ret_val = hw->nvm.ops.valid_led_default(hw, &data); | |
1324 | if (ret_val) | |
1325 | return ret_val; | |
1326 | ||
1327 | mac->ledctl_default = er32(LEDCTL); | |
1328 | mac->ledctl_mode1 = mac->ledctl_default; | |
1329 | mac->ledctl_mode2 = mac->ledctl_default; | |
1330 | ||
1331 | for (i = 0; i < 4; i++) { | |
1332 | temp = (data >> (i << 2)) & led_mask; | |
1333 | switch (temp) { | |
1334 | case ID_LED_ON1_DEF2: | |
1335 | case ID_LED_ON1_ON2: | |
1336 | case ID_LED_ON1_OFF2: | |
1337 | mac->ledctl_mode1 &= ~(ledctl_mask << (i << 3)); | |
1338 | mac->ledctl_mode1 |= ledctl_on << (i << 3); | |
1339 | break; | |
1340 | case ID_LED_OFF1_DEF2: | |
1341 | case ID_LED_OFF1_ON2: | |
1342 | case ID_LED_OFF1_OFF2: | |
1343 | mac->ledctl_mode1 &= ~(ledctl_mask << (i << 3)); | |
1344 | mac->ledctl_mode1 |= ledctl_off << (i << 3); | |
1345 | break; | |
1346 | default: | |
1347 | /* Do nothing */ | |
1348 | break; | |
1349 | } | |
1350 | switch (temp) { | |
1351 | case ID_LED_DEF1_ON2: | |
1352 | case ID_LED_ON1_ON2: | |
1353 | case ID_LED_OFF1_ON2: | |
1354 | mac->ledctl_mode2 &= ~(ledctl_mask << (i << 3)); | |
1355 | mac->ledctl_mode2 |= ledctl_on << (i << 3); | |
1356 | break; | |
1357 | case ID_LED_DEF1_OFF2: | |
1358 | case ID_LED_ON1_OFF2: | |
1359 | case ID_LED_OFF1_OFF2: | |
1360 | mac->ledctl_mode2 &= ~(ledctl_mask << (i << 3)); | |
1361 | mac->ledctl_mode2 |= ledctl_off << (i << 3); | |
1362 | break; | |
1363 | default: | |
1364 | /* Do nothing */ | |
1365 | break; | |
1366 | } | |
1367 | } | |
1368 | ||
1369 | return 0; | |
1370 | } | |
1371 | ||
1372 | /** | |
1373 | * e1000e_cleanup_led_generic - Set LED config to default operation | |
1374 | * @hw: pointer to the HW structure | |
1375 | * | |
1376 | * Remove the current LED configuration and set the LED configuration | |
1377 | * to the default value, saved from the EEPROM. | |
1378 | **/ | |
1379 | s32 e1000e_cleanup_led_generic(struct e1000_hw *hw) | |
1380 | { | |
1381 | ew32(LEDCTL, hw->mac.ledctl_default); | |
1382 | return 0; | |
1383 | } | |
1384 | ||
1385 | /** | |
1386 | * e1000e_blink_led - Blink LED | |
1387 | * @hw: pointer to the HW structure | |
1388 | * | |
489815ce | 1389 | * Blink the LEDs which are set to be on. |
bc7f75fa AK |
1390 | **/ |
1391 | s32 e1000e_blink_led(struct e1000_hw *hw) | |
1392 | { | |
1393 | u32 ledctl_blink = 0; | |
1394 | u32 i; | |
1395 | ||
1396 | if (hw->media_type == e1000_media_type_fiber) { | |
1397 | /* always blink LED0 for PCI-E fiber */ | |
1398 | ledctl_blink = E1000_LEDCTL_LED0_BLINK | | |
1399 | (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED0_MODE_SHIFT); | |
1400 | } else { | |
1401 | /* set the blink bit for each LED that's "on" (0x0E) | |
1402 | * in ledctl_mode2 */ | |
1403 | ledctl_blink = hw->mac.ledctl_mode2; | |
1404 | for (i = 0; i < 4; i++) | |
1405 | if (((hw->mac.ledctl_mode2 >> (i * 8)) & 0xFF) == | |
1406 | E1000_LEDCTL_MODE_LED_ON) | |
1407 | ledctl_blink |= (E1000_LEDCTL_LED0_BLINK << | |
1408 | (i * 8)); | |
1409 | } | |
1410 | ||
1411 | ew32(LEDCTL, ledctl_blink); | |
1412 | ||
1413 | return 0; | |
1414 | } | |
1415 | ||
1416 | /** | |
1417 | * e1000e_led_on_generic - Turn LED on | |
1418 | * @hw: pointer to the HW structure | |
1419 | * | |
1420 | * Turn LED on. | |
1421 | **/ | |
1422 | s32 e1000e_led_on_generic(struct e1000_hw *hw) | |
1423 | { | |
1424 | u32 ctrl; | |
1425 | ||
1426 | switch (hw->media_type) { | |
1427 | case e1000_media_type_fiber: | |
1428 | ctrl = er32(CTRL); | |
1429 | ctrl &= ~E1000_CTRL_SWDPIN0; | |
1430 | ctrl |= E1000_CTRL_SWDPIO0; | |
1431 | ew32(CTRL, ctrl); | |
1432 | break; | |
1433 | case e1000_media_type_copper: | |
1434 | ew32(LEDCTL, hw->mac.ledctl_mode2); | |
1435 | break; | |
1436 | default: | |
1437 | break; | |
1438 | } | |
1439 | ||
1440 | return 0; | |
1441 | } | |
1442 | ||
1443 | /** | |
1444 | * e1000e_led_off_generic - Turn LED off | |
1445 | * @hw: pointer to the HW structure | |
1446 | * | |
1447 | * Turn LED off. | |
1448 | **/ | |
1449 | s32 e1000e_led_off_generic(struct e1000_hw *hw) | |
1450 | { | |
1451 | u32 ctrl; | |
1452 | ||
1453 | switch (hw->media_type) { | |
1454 | case e1000_media_type_fiber: | |
1455 | ctrl = er32(CTRL); | |
1456 | ctrl |= E1000_CTRL_SWDPIN0; | |
1457 | ctrl |= E1000_CTRL_SWDPIO0; | |
1458 | ew32(CTRL, ctrl); | |
1459 | break; | |
1460 | case e1000_media_type_copper: | |
1461 | ew32(LEDCTL, hw->mac.ledctl_mode1); | |
1462 | break; | |
1463 | default: | |
1464 | break; | |
1465 | } | |
1466 | ||
1467 | return 0; | |
1468 | } | |
1469 | ||
1470 | /** | |
1471 | * e1000e_set_pcie_no_snoop - Set PCI-express capabilities | |
1472 | * @hw: pointer to the HW structure | |
1473 | * @no_snoop: bitmap of snoop events | |
1474 | * | |
1475 | * Set the PCI-express register to snoop for events enabled in 'no_snoop'. | |
1476 | **/ | |
1477 | void e1000e_set_pcie_no_snoop(struct e1000_hw *hw, u32 no_snoop) | |
1478 | { | |
1479 | u32 gcr; | |
1480 | ||
1481 | if (no_snoop) { | |
1482 | gcr = er32(GCR); | |
1483 | gcr &= ~(PCIE_NO_SNOOP_ALL); | |
1484 | gcr |= no_snoop; | |
1485 | ew32(GCR, gcr); | |
1486 | } | |
1487 | } | |
1488 | ||
1489 | /** | |
1490 | * e1000e_disable_pcie_master - Disables PCI-express master access | |
1491 | * @hw: pointer to the HW structure | |
1492 | * | |
1493 | * Returns 0 if successful, else returns -10 | |
489815ce | 1494 | * (-E1000_ERR_MASTER_REQUESTS_PENDING) if master disable bit has not caused |
bc7f75fa AK |
1495 | * the master requests to be disabled. |
1496 | * | |
1497 | * Disables PCI-Express master access and verifies there are no pending | |
1498 | * requests. | |
1499 | **/ | |
1500 | s32 e1000e_disable_pcie_master(struct e1000_hw *hw) | |
1501 | { | |
1502 | u32 ctrl; | |
1503 | s32 timeout = MASTER_DISABLE_TIMEOUT; | |
1504 | ||
1505 | ctrl = er32(CTRL); | |
1506 | ctrl |= E1000_CTRL_GIO_MASTER_DISABLE; | |
1507 | ew32(CTRL, ctrl); | |
1508 | ||
1509 | while (timeout) { | |
1510 | if (!(er32(STATUS) & | |
1511 | E1000_STATUS_GIO_MASTER_ENABLE)) | |
1512 | break; | |
1513 | udelay(100); | |
1514 | timeout--; | |
1515 | } | |
1516 | ||
1517 | if (!timeout) { | |
1518 | hw_dbg(hw, "Master requests are pending.\n"); | |
1519 | return -E1000_ERR_MASTER_REQUESTS_PENDING; | |
1520 | } | |
1521 | ||
1522 | return 0; | |
1523 | } | |
1524 | ||
1525 | /** | |
1526 | * e1000e_reset_adaptive - Reset Adaptive Interframe Spacing | |
1527 | * @hw: pointer to the HW structure | |
1528 | * | |
1529 | * Reset the Adaptive Interframe Spacing throttle to default values. | |
1530 | **/ | |
1531 | void e1000e_reset_adaptive(struct e1000_hw *hw) | |
1532 | { | |
1533 | struct e1000_mac_info *mac = &hw->mac; | |
1534 | ||
1535 | mac->current_ifs_val = 0; | |
1536 | mac->ifs_min_val = IFS_MIN; | |
1537 | mac->ifs_max_val = IFS_MAX; | |
1538 | mac->ifs_step_size = IFS_STEP; | |
1539 | mac->ifs_ratio = IFS_RATIO; | |
1540 | ||
1541 | mac->in_ifs_mode = 0; | |
1542 | ew32(AIT, 0); | |
1543 | } | |
1544 | ||
1545 | /** | |
1546 | * e1000e_update_adaptive - Update Adaptive Interframe Spacing | |
1547 | * @hw: pointer to the HW structure | |
1548 | * | |
1549 | * Update the Adaptive Interframe Spacing Throttle value based on the | |
1550 | * time between transmitted packets and time between collisions. | |
1551 | **/ | |
1552 | void e1000e_update_adaptive(struct e1000_hw *hw) | |
1553 | { | |
1554 | struct e1000_mac_info *mac = &hw->mac; | |
1555 | ||
1556 | if ((mac->collision_delta * mac->ifs_ratio) > mac->tx_packet_delta) { | |
1557 | if (mac->tx_packet_delta > MIN_NUM_XMITS) { | |
1558 | mac->in_ifs_mode = 1; | |
1559 | if (mac->current_ifs_val < mac->ifs_max_val) { | |
1560 | if (!mac->current_ifs_val) | |
1561 | mac->current_ifs_val = mac->ifs_min_val; | |
1562 | else | |
1563 | mac->current_ifs_val += | |
1564 | mac->ifs_step_size; | |
1565 | ew32(AIT, | |
1566 | mac->current_ifs_val); | |
1567 | } | |
1568 | } | |
1569 | } else { | |
1570 | if (mac->in_ifs_mode && | |
1571 | (mac->tx_packet_delta <= MIN_NUM_XMITS)) { | |
1572 | mac->current_ifs_val = 0; | |
1573 | mac->in_ifs_mode = 0; | |
1574 | ew32(AIT, 0); | |
1575 | } | |
1576 | } | |
1577 | } | |
1578 | ||
1579 | /** | |
1580 | * e1000_raise_eec_clk - Raise EEPROM clock | |
1581 | * @hw: pointer to the HW structure | |
1582 | * @eecd: pointer to the EEPROM | |
1583 | * | |
1584 | * Enable/Raise the EEPROM clock bit. | |
1585 | **/ | |
1586 | static void e1000_raise_eec_clk(struct e1000_hw *hw, u32 *eecd) | |
1587 | { | |
1588 | *eecd = *eecd | E1000_EECD_SK; | |
1589 | ew32(EECD, *eecd); | |
1590 | e1e_flush(); | |
1591 | udelay(hw->nvm.delay_usec); | |
1592 | } | |
1593 | ||
1594 | /** | |
1595 | * e1000_lower_eec_clk - Lower EEPROM clock | |
1596 | * @hw: pointer to the HW structure | |
1597 | * @eecd: pointer to the EEPROM | |
1598 | * | |
1599 | * Clear/Lower the EEPROM clock bit. | |
1600 | **/ | |
1601 | static void e1000_lower_eec_clk(struct e1000_hw *hw, u32 *eecd) | |
1602 | { | |
1603 | *eecd = *eecd & ~E1000_EECD_SK; | |
1604 | ew32(EECD, *eecd); | |
1605 | e1e_flush(); | |
1606 | udelay(hw->nvm.delay_usec); | |
1607 | } | |
1608 | ||
1609 | /** | |
1610 | * e1000_shift_out_eec_bits - Shift data bits our to the EEPROM | |
1611 | * @hw: pointer to the HW structure | |
1612 | * @data: data to send to the EEPROM | |
1613 | * @count: number of bits to shift out | |
1614 | * | |
1615 | * We need to shift 'count' bits out to the EEPROM. So, the value in the | |
1616 | * "data" parameter will be shifted out to the EEPROM one bit at a time. | |
1617 | * In order to do this, "data" must be broken down into bits. | |
1618 | **/ | |
1619 | static void e1000_shift_out_eec_bits(struct e1000_hw *hw, u16 data, u16 count) | |
1620 | { | |
1621 | struct e1000_nvm_info *nvm = &hw->nvm; | |
1622 | u32 eecd = er32(EECD); | |
1623 | u32 mask; | |
1624 | ||
1625 | mask = 0x01 << (count - 1); | |
1626 | if (nvm->type == e1000_nvm_eeprom_spi) | |
1627 | eecd |= E1000_EECD_DO; | |
1628 | ||
1629 | do { | |
1630 | eecd &= ~E1000_EECD_DI; | |
1631 | ||
1632 | if (data & mask) | |
1633 | eecd |= E1000_EECD_DI; | |
1634 | ||
1635 | ew32(EECD, eecd); | |
1636 | e1e_flush(); | |
1637 | ||
1638 | udelay(nvm->delay_usec); | |
1639 | ||
1640 | e1000_raise_eec_clk(hw, &eecd); | |
1641 | e1000_lower_eec_clk(hw, &eecd); | |
1642 | ||
1643 | mask >>= 1; | |
1644 | } while (mask); | |
1645 | ||
1646 | eecd &= ~E1000_EECD_DI; | |
1647 | ew32(EECD, eecd); | |
1648 | } | |
1649 | ||
1650 | /** | |
1651 | * e1000_shift_in_eec_bits - Shift data bits in from the EEPROM | |
1652 | * @hw: pointer to the HW structure | |
1653 | * @count: number of bits to shift in | |
1654 | * | |
1655 | * In order to read a register from the EEPROM, we need to shift 'count' bits | |
1656 | * in from the EEPROM. Bits are "shifted in" by raising the clock input to | |
1657 | * the EEPROM (setting the SK bit), and then reading the value of the data out | |
1658 | * "DO" bit. During this "shifting in" process the data in "DI" bit should | |
1659 | * always be clear. | |
1660 | **/ | |
1661 | static u16 e1000_shift_in_eec_bits(struct e1000_hw *hw, u16 count) | |
1662 | { | |
1663 | u32 eecd; | |
1664 | u32 i; | |
1665 | u16 data; | |
1666 | ||
1667 | eecd = er32(EECD); | |
1668 | ||
1669 | eecd &= ~(E1000_EECD_DO | E1000_EECD_DI); | |
1670 | data = 0; | |
1671 | ||
1672 | for (i = 0; i < count; i++) { | |
1673 | data <<= 1; | |
1674 | e1000_raise_eec_clk(hw, &eecd); | |
1675 | ||
1676 | eecd = er32(EECD); | |
1677 | ||
1678 | eecd &= ~E1000_EECD_DI; | |
1679 | if (eecd & E1000_EECD_DO) | |
1680 | data |= 1; | |
1681 | ||
1682 | e1000_lower_eec_clk(hw, &eecd); | |
1683 | } | |
1684 | ||
1685 | return data; | |
1686 | } | |
1687 | ||
1688 | /** | |
1689 | * e1000e_poll_eerd_eewr_done - Poll for EEPROM read/write completion | |
1690 | * @hw: pointer to the HW structure | |
1691 | * @ee_reg: EEPROM flag for polling | |
1692 | * | |
1693 | * Polls the EEPROM status bit for either read or write completion based | |
1694 | * upon the value of 'ee_reg'. | |
1695 | **/ | |
1696 | s32 e1000e_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg) | |
1697 | { | |
1698 | u32 attempts = 100000; | |
1699 | u32 i, reg = 0; | |
1700 | ||
1701 | for (i = 0; i < attempts; i++) { | |
1702 | if (ee_reg == E1000_NVM_POLL_READ) | |
1703 | reg = er32(EERD); | |
1704 | else | |
1705 | reg = er32(EEWR); | |
1706 | ||
1707 | if (reg & E1000_NVM_RW_REG_DONE) | |
1708 | return 0; | |
1709 | ||
1710 | udelay(5); | |
1711 | } | |
1712 | ||
1713 | return -E1000_ERR_NVM; | |
1714 | } | |
1715 | ||
1716 | /** | |
1717 | * e1000e_acquire_nvm - Generic request for access to EEPROM | |
1718 | * @hw: pointer to the HW structure | |
1719 | * | |
1720 | * Set the EEPROM access request bit and wait for EEPROM access grant bit. | |
1721 | * Return successful if access grant bit set, else clear the request for | |
1722 | * EEPROM access and return -E1000_ERR_NVM (-1). | |
1723 | **/ | |
1724 | s32 e1000e_acquire_nvm(struct e1000_hw *hw) | |
1725 | { | |
1726 | u32 eecd = er32(EECD); | |
1727 | s32 timeout = E1000_NVM_GRANT_ATTEMPTS; | |
1728 | ||
1729 | ew32(EECD, eecd | E1000_EECD_REQ); | |
1730 | eecd = er32(EECD); | |
1731 | ||
1732 | while (timeout) { | |
1733 | if (eecd & E1000_EECD_GNT) | |
1734 | break; | |
1735 | udelay(5); | |
1736 | eecd = er32(EECD); | |
1737 | timeout--; | |
1738 | } | |
1739 | ||
1740 | if (!timeout) { | |
1741 | eecd &= ~E1000_EECD_REQ; | |
1742 | ew32(EECD, eecd); | |
1743 | hw_dbg(hw, "Could not acquire NVM grant\n"); | |
1744 | return -E1000_ERR_NVM; | |
1745 | } | |
1746 | ||
1747 | return 0; | |
1748 | } | |
1749 | ||
1750 | /** | |
1751 | * e1000_standby_nvm - Return EEPROM to standby state | |
1752 | * @hw: pointer to the HW structure | |
1753 | * | |
1754 | * Return the EEPROM to a standby state. | |
1755 | **/ | |
1756 | static void e1000_standby_nvm(struct e1000_hw *hw) | |
1757 | { | |
1758 | struct e1000_nvm_info *nvm = &hw->nvm; | |
1759 | u32 eecd = er32(EECD); | |
1760 | ||
1761 | if (nvm->type == e1000_nvm_eeprom_spi) { | |
1762 | /* Toggle CS to flush commands */ | |
1763 | eecd |= E1000_EECD_CS; | |
1764 | ew32(EECD, eecd); | |
1765 | e1e_flush(); | |
1766 | udelay(nvm->delay_usec); | |
1767 | eecd &= ~E1000_EECD_CS; | |
1768 | ew32(EECD, eecd); | |
1769 | e1e_flush(); | |
1770 | udelay(nvm->delay_usec); | |
1771 | } | |
1772 | } | |
1773 | ||
1774 | /** | |
1775 | * e1000_stop_nvm - Terminate EEPROM command | |
1776 | * @hw: pointer to the HW structure | |
1777 | * | |
1778 | * Terminates the current command by inverting the EEPROM's chip select pin. | |
1779 | **/ | |
1780 | static void e1000_stop_nvm(struct e1000_hw *hw) | |
1781 | { | |
1782 | u32 eecd; | |
1783 | ||
1784 | eecd = er32(EECD); | |
1785 | if (hw->nvm.type == e1000_nvm_eeprom_spi) { | |
1786 | /* Pull CS high */ | |
1787 | eecd |= E1000_EECD_CS; | |
1788 | e1000_lower_eec_clk(hw, &eecd); | |
1789 | } | |
1790 | } | |
1791 | ||
1792 | /** | |
1793 | * e1000e_release_nvm - Release exclusive access to EEPROM | |
1794 | * @hw: pointer to the HW structure | |
1795 | * | |
1796 | * Stop any current commands to the EEPROM and clear the EEPROM request bit. | |
1797 | **/ | |
1798 | void e1000e_release_nvm(struct e1000_hw *hw) | |
1799 | { | |
1800 | u32 eecd; | |
1801 | ||
1802 | e1000_stop_nvm(hw); | |
1803 | ||
1804 | eecd = er32(EECD); | |
1805 | eecd &= ~E1000_EECD_REQ; | |
1806 | ew32(EECD, eecd); | |
1807 | } | |
1808 | ||
1809 | /** | |
1810 | * e1000_ready_nvm_eeprom - Prepares EEPROM for read/write | |
1811 | * @hw: pointer to the HW structure | |
1812 | * | |
1813 | * Setups the EEPROM for reading and writing. | |
1814 | **/ | |
1815 | static s32 e1000_ready_nvm_eeprom(struct e1000_hw *hw) | |
1816 | { | |
1817 | struct e1000_nvm_info *nvm = &hw->nvm; | |
1818 | u32 eecd = er32(EECD); | |
1819 | u16 timeout = 0; | |
1820 | u8 spi_stat_reg; | |
1821 | ||
1822 | if (nvm->type == e1000_nvm_eeprom_spi) { | |
1823 | /* Clear SK and CS */ | |
1824 | eecd &= ~(E1000_EECD_CS | E1000_EECD_SK); | |
1825 | ew32(EECD, eecd); | |
1826 | udelay(1); | |
1827 | timeout = NVM_MAX_RETRY_SPI; | |
1828 | ||
1829 | /* Read "Status Register" repeatedly until the LSB is cleared. | |
1830 | * The EEPROM will signal that the command has been completed | |
1831 | * by clearing bit 0 of the internal status register. If it's | |
1832 | * not cleared within 'timeout', then error out. */ | |
1833 | while (timeout) { | |
1834 | e1000_shift_out_eec_bits(hw, NVM_RDSR_OPCODE_SPI, | |
1835 | hw->nvm.opcode_bits); | |
1836 | spi_stat_reg = (u8)e1000_shift_in_eec_bits(hw, 8); | |
1837 | if (!(spi_stat_reg & NVM_STATUS_RDY_SPI)) | |
1838 | break; | |
1839 | ||
1840 | udelay(5); | |
1841 | e1000_standby_nvm(hw); | |
1842 | timeout--; | |
1843 | } | |
1844 | ||
1845 | if (!timeout) { | |
1846 | hw_dbg(hw, "SPI NVM Status error\n"); | |
1847 | return -E1000_ERR_NVM; | |
1848 | } | |
1849 | } | |
1850 | ||
1851 | return 0; | |
1852 | } | |
1853 | ||
bc7f75fa AK |
1854 | /** |
1855 | * e1000e_read_nvm_eerd - Reads EEPROM using EERD register | |
1856 | * @hw: pointer to the HW structure | |
1857 | * @offset: offset of word in the EEPROM to read | |
1858 | * @words: number of words to read | |
1859 | * @data: word read from the EEPROM | |
1860 | * | |
1861 | * Reads a 16 bit word from the EEPROM using the EERD register. | |
1862 | **/ | |
1863 | s32 e1000e_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) | |
1864 | { | |
1865 | struct e1000_nvm_info *nvm = &hw->nvm; | |
1866 | u32 i, eerd = 0; | |
1867 | s32 ret_val = 0; | |
1868 | ||
1869 | /* A check for invalid values: offset too large, too many words, | |
1870 | * and not enough words. */ | |
1871 | if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || | |
1872 | (words == 0)) { | |
1873 | hw_dbg(hw, "nvm parameter(s) out of bounds\n"); | |
1874 | return -E1000_ERR_NVM; | |
1875 | } | |
1876 | ||
1877 | for (i = 0; i < words; i++) { | |
1878 | eerd = ((offset+i) << E1000_NVM_RW_ADDR_SHIFT) + | |
1879 | E1000_NVM_RW_REG_START; | |
1880 | ||
1881 | ew32(EERD, eerd); | |
1882 | ret_val = e1000e_poll_eerd_eewr_done(hw, E1000_NVM_POLL_READ); | |
1883 | if (ret_val) | |
1884 | break; | |
1885 | ||
1886 | data[i] = (er32(EERD) >> | |
1887 | E1000_NVM_RW_REG_DATA); | |
1888 | } | |
1889 | ||
1890 | return ret_val; | |
1891 | } | |
1892 | ||
1893 | /** | |
1894 | * e1000e_write_nvm_spi - Write to EEPROM using SPI | |
1895 | * @hw: pointer to the HW structure | |
1896 | * @offset: offset within the EEPROM to be written to | |
1897 | * @words: number of words to write | |
1898 | * @data: 16 bit word(s) to be written to the EEPROM | |
1899 | * | |
1900 | * Writes data to EEPROM at offset using SPI interface. | |
1901 | * | |
1902 | * If e1000e_update_nvm_checksum is not called after this function , the | |
489815ce | 1903 | * EEPROM will most likely contain an invalid checksum. |
bc7f75fa AK |
1904 | **/ |
1905 | s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) | |
1906 | { | |
1907 | struct e1000_nvm_info *nvm = &hw->nvm; | |
1908 | s32 ret_val; | |
1909 | u16 widx = 0; | |
1910 | ||
1911 | /* A check for invalid values: offset too large, too many words, | |
1912 | * and not enough words. */ | |
1913 | if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || | |
1914 | (words == 0)) { | |
1915 | hw_dbg(hw, "nvm parameter(s) out of bounds\n"); | |
1916 | return -E1000_ERR_NVM; | |
1917 | } | |
1918 | ||
1919 | ret_val = nvm->ops.acquire_nvm(hw); | |
1920 | if (ret_val) | |
1921 | return ret_val; | |
1922 | ||
1923 | msleep(10); | |
1924 | ||
1925 | while (widx < words) { | |
1926 | u8 write_opcode = NVM_WRITE_OPCODE_SPI; | |
1927 | ||
1928 | ret_val = e1000_ready_nvm_eeprom(hw); | |
1929 | if (ret_val) { | |
1930 | nvm->ops.release_nvm(hw); | |
1931 | return ret_val; | |
1932 | } | |
1933 | ||
1934 | e1000_standby_nvm(hw); | |
1935 | ||
1936 | /* Send the WRITE ENABLE command (8 bit opcode) */ | |
1937 | e1000_shift_out_eec_bits(hw, NVM_WREN_OPCODE_SPI, | |
1938 | nvm->opcode_bits); | |
1939 | ||
1940 | e1000_standby_nvm(hw); | |
1941 | ||
1942 | /* Some SPI eeproms use the 8th address bit embedded in the | |
1943 | * opcode */ | |
1944 | if ((nvm->address_bits == 8) && (offset >= 128)) | |
1945 | write_opcode |= NVM_A8_OPCODE_SPI; | |
1946 | ||
1947 | /* Send the Write command (8-bit opcode + addr) */ | |
1948 | e1000_shift_out_eec_bits(hw, write_opcode, nvm->opcode_bits); | |
1949 | e1000_shift_out_eec_bits(hw, (u16)((offset + widx) * 2), | |
1950 | nvm->address_bits); | |
1951 | ||
1952 | /* Loop to allow for up to whole page write of eeprom */ | |
1953 | while (widx < words) { | |
1954 | u16 word_out = data[widx]; | |
1955 | word_out = (word_out >> 8) | (word_out << 8); | |
1956 | e1000_shift_out_eec_bits(hw, word_out, 16); | |
1957 | widx++; | |
1958 | ||
1959 | if ((((offset + widx) * 2) % nvm->page_size) == 0) { | |
1960 | e1000_standby_nvm(hw); | |
1961 | break; | |
1962 | } | |
1963 | } | |
1964 | } | |
1965 | ||
1966 | msleep(10); | |
1967 | return 0; | |
1968 | } | |
1969 | ||
1970 | /** | |
1971 | * e1000e_read_mac_addr - Read device MAC address | |
1972 | * @hw: pointer to the HW structure | |
1973 | * | |
1974 | * Reads the device MAC address from the EEPROM and stores the value. | |
1975 | * Since devices with two ports use the same EEPROM, we increment the | |
1976 | * last bit in the MAC address for the second port. | |
1977 | **/ | |
1978 | s32 e1000e_read_mac_addr(struct e1000_hw *hw) | |
1979 | { | |
1980 | s32 ret_val; | |
1981 | u16 offset, nvm_data, i; | |
93ca1610 BH |
1982 | u16 mac_addr_offset = 0; |
1983 | ||
1984 | if (hw->mac.type == e1000_82571) { | |
1985 | /* Check for an alternate MAC address. An alternate MAC | |
1986 | * address can be setup by pre-boot software and must be | |
1987 | * treated like a permanent address and must override the | |
1988 | * actual permanent MAC address. */ | |
1989 | ret_val = e1000_read_nvm(hw, NVM_ALT_MAC_ADDR_PTR, 1, | |
1990 | &mac_addr_offset); | |
1991 | if (ret_val) { | |
1992 | hw_dbg(hw, "NVM Read Error\n"); | |
1993 | return ret_val; | |
1994 | } | |
1995 | if (mac_addr_offset == 0xFFFF) | |
1996 | mac_addr_offset = 0; | |
1997 | ||
1998 | if (mac_addr_offset) { | |
1999 | if (hw->bus.func == E1000_FUNC_1) | |
2000 | mac_addr_offset += ETH_ALEN/sizeof(u16); | |
2001 | ||
2002 | /* make sure we have a valid mac address here | |
2003 | * before using it */ | |
2004 | ret_val = e1000_read_nvm(hw, mac_addr_offset, 1, | |
2005 | &nvm_data); | |
2006 | if (ret_val) { | |
2007 | hw_dbg(hw, "NVM Read Error\n"); | |
2008 | return ret_val; | |
2009 | } | |
2010 | if (nvm_data & 0x0001) | |
2011 | mac_addr_offset = 0; | |
2012 | } | |
2013 | ||
2014 | if (mac_addr_offset) | |
2015 | hw->dev_spec.e82571.alt_mac_addr_is_present = 1; | |
2016 | } | |
bc7f75fa AK |
2017 | |
2018 | for (i = 0; i < ETH_ALEN; i += 2) { | |
93ca1610 | 2019 | offset = mac_addr_offset + (i >> 1); |
bc7f75fa AK |
2020 | ret_val = e1000_read_nvm(hw, offset, 1, &nvm_data); |
2021 | if (ret_val) { | |
2022 | hw_dbg(hw, "NVM Read Error\n"); | |
2023 | return ret_val; | |
2024 | } | |
2025 | hw->mac.perm_addr[i] = (u8)(nvm_data & 0xFF); | |
2026 | hw->mac.perm_addr[i+1] = (u8)(nvm_data >> 8); | |
2027 | } | |
2028 | ||
2029 | /* Flip last bit of mac address if we're on second port */ | |
93ca1610 | 2030 | if (!mac_addr_offset && hw->bus.func == E1000_FUNC_1) |
bc7f75fa AK |
2031 | hw->mac.perm_addr[5] ^= 1; |
2032 | ||
2033 | for (i = 0; i < ETH_ALEN; i++) | |
2034 | hw->mac.addr[i] = hw->mac.perm_addr[i]; | |
2035 | ||
2036 | return 0; | |
2037 | } | |
2038 | ||
2039 | /** | |
2040 | * e1000e_validate_nvm_checksum_generic - Validate EEPROM checksum | |
2041 | * @hw: pointer to the HW structure | |
2042 | * | |
2043 | * Calculates the EEPROM checksum by reading/adding each word of the EEPROM | |
2044 | * and then verifies that the sum of the EEPROM is equal to 0xBABA. | |
2045 | **/ | |
2046 | s32 e1000e_validate_nvm_checksum_generic(struct e1000_hw *hw) | |
2047 | { | |
2048 | s32 ret_val; | |
2049 | u16 checksum = 0; | |
2050 | u16 i, nvm_data; | |
2051 | ||
2052 | for (i = 0; i < (NVM_CHECKSUM_REG + 1); i++) { | |
2053 | ret_val = e1000_read_nvm(hw, i, 1, &nvm_data); | |
2054 | if (ret_val) { | |
2055 | hw_dbg(hw, "NVM Read Error\n"); | |
2056 | return ret_val; | |
2057 | } | |
2058 | checksum += nvm_data; | |
2059 | } | |
2060 | ||
2061 | if (checksum != (u16) NVM_SUM) { | |
2062 | hw_dbg(hw, "NVM Checksum Invalid\n"); | |
2063 | return -E1000_ERR_NVM; | |
2064 | } | |
2065 | ||
2066 | return 0; | |
2067 | } | |
2068 | ||
2069 | /** | |
2070 | * e1000e_update_nvm_checksum_generic - Update EEPROM checksum | |
2071 | * @hw: pointer to the HW structure | |
2072 | * | |
2073 | * Updates the EEPROM checksum by reading/adding each word of the EEPROM | |
2074 | * up to the checksum. Then calculates the EEPROM checksum and writes the | |
2075 | * value to the EEPROM. | |
2076 | **/ | |
2077 | s32 e1000e_update_nvm_checksum_generic(struct e1000_hw *hw) | |
2078 | { | |
2079 | s32 ret_val; | |
2080 | u16 checksum = 0; | |
2081 | u16 i, nvm_data; | |
2082 | ||
2083 | for (i = 0; i < NVM_CHECKSUM_REG; i++) { | |
2084 | ret_val = e1000_read_nvm(hw, i, 1, &nvm_data); | |
2085 | if (ret_val) { | |
2086 | hw_dbg(hw, "NVM Read Error while updating checksum.\n"); | |
2087 | return ret_val; | |
2088 | } | |
2089 | checksum += nvm_data; | |
2090 | } | |
2091 | checksum = (u16) NVM_SUM - checksum; | |
2092 | ret_val = e1000_write_nvm(hw, NVM_CHECKSUM_REG, 1, &checksum); | |
2093 | if (ret_val) | |
2094 | hw_dbg(hw, "NVM Write Error while updating checksum.\n"); | |
2095 | ||
2096 | return ret_val; | |
2097 | } | |
2098 | ||
2099 | /** | |
2100 | * e1000e_reload_nvm - Reloads EEPROM | |
2101 | * @hw: pointer to the HW structure | |
2102 | * | |
2103 | * Reloads the EEPROM by setting the "Reinitialize from EEPROM" bit in the | |
2104 | * extended control register. | |
2105 | **/ | |
2106 | void e1000e_reload_nvm(struct e1000_hw *hw) | |
2107 | { | |
2108 | u32 ctrl_ext; | |
2109 | ||
2110 | udelay(10); | |
2111 | ctrl_ext = er32(CTRL_EXT); | |
2112 | ctrl_ext |= E1000_CTRL_EXT_EE_RST; | |
2113 | ew32(CTRL_EXT, ctrl_ext); | |
2114 | e1e_flush(); | |
2115 | } | |
2116 | ||
2117 | /** | |
2118 | * e1000_calculate_checksum - Calculate checksum for buffer | |
2119 | * @buffer: pointer to EEPROM | |
2120 | * @length: size of EEPROM to calculate a checksum for | |
2121 | * | |
2122 | * Calculates the checksum for some buffer on a specified length. The | |
2123 | * checksum calculated is returned. | |
2124 | **/ | |
2125 | static u8 e1000_calculate_checksum(u8 *buffer, u32 length) | |
2126 | { | |
2127 | u32 i; | |
2128 | u8 sum = 0; | |
2129 | ||
2130 | if (!buffer) | |
2131 | return 0; | |
2132 | ||
2133 | for (i = 0; i < length; i++) | |
2134 | sum += buffer[i]; | |
2135 | ||
2136 | return (u8) (0 - sum); | |
2137 | } | |
2138 | ||
2139 | /** | |
2140 | * e1000_mng_enable_host_if - Checks host interface is enabled | |
2141 | * @hw: pointer to the HW structure | |
2142 | * | |
2143 | * Returns E1000_success upon success, else E1000_ERR_HOST_INTERFACE_COMMAND | |
2144 | * | |
489815ce | 2145 | * This function checks whether the HOST IF is enabled for command operation |
bc7f75fa AK |
2146 | * and also checks whether the previous command is completed. It busy waits |
2147 | * in case of previous command is not completed. | |
2148 | **/ | |
2149 | static s32 e1000_mng_enable_host_if(struct e1000_hw *hw) | |
2150 | { | |
2151 | u32 hicr; | |
2152 | u8 i; | |
2153 | ||
2154 | /* Check that the host interface is enabled. */ | |
2155 | hicr = er32(HICR); | |
2156 | if ((hicr & E1000_HICR_EN) == 0) { | |
2157 | hw_dbg(hw, "E1000_HOST_EN bit disabled.\n"); | |
2158 | return -E1000_ERR_HOST_INTERFACE_COMMAND; | |
2159 | } | |
2160 | /* check the previous command is completed */ | |
2161 | for (i = 0; i < E1000_MNG_DHCP_COMMAND_TIMEOUT; i++) { | |
2162 | hicr = er32(HICR); | |
2163 | if (!(hicr & E1000_HICR_C)) | |
2164 | break; | |
2165 | mdelay(1); | |
2166 | } | |
2167 | ||
2168 | if (i == E1000_MNG_DHCP_COMMAND_TIMEOUT) { | |
2169 | hw_dbg(hw, "Previous command timeout failed .\n"); | |
2170 | return -E1000_ERR_HOST_INTERFACE_COMMAND; | |
2171 | } | |
2172 | ||
2173 | return 0; | |
2174 | } | |
2175 | ||
2176 | /** | |
489815ce | 2177 | * e1000e_check_mng_mode - check management mode |
bc7f75fa AK |
2178 | * @hw: pointer to the HW structure |
2179 | * | |
2180 | * Reads the firmware semaphore register and returns true (>0) if | |
2181 | * manageability is enabled, else false (0). | |
2182 | **/ | |
2183 | bool e1000e_check_mng_mode(struct e1000_hw *hw) | |
2184 | { | |
2185 | u32 fwsm = er32(FWSM); | |
2186 | ||
2187 | return (fwsm & E1000_FWSM_MODE_MASK) == hw->mac.ops.mng_mode_enab; | |
2188 | } | |
2189 | ||
2190 | /** | |
2191 | * e1000e_enable_tx_pkt_filtering - Enable packet filtering on TX | |
2192 | * @hw: pointer to the HW structure | |
2193 | * | |
2194 | * Enables packet filtering on transmit packets if manageability is enabled | |
2195 | * and host interface is enabled. | |
2196 | **/ | |
2197 | bool e1000e_enable_tx_pkt_filtering(struct e1000_hw *hw) | |
2198 | { | |
2199 | struct e1000_host_mng_dhcp_cookie *hdr = &hw->mng_cookie; | |
2200 | u32 *buffer = (u32 *)&hw->mng_cookie; | |
2201 | u32 offset; | |
2202 | s32 ret_val, hdr_csum, csum; | |
2203 | u8 i, len; | |
2204 | ||
2205 | /* No manageability, no filtering */ | |
2206 | if (!e1000e_check_mng_mode(hw)) { | |
2207 | hw->mac.tx_pkt_filtering = 0; | |
2208 | return 0; | |
2209 | } | |
2210 | ||
2211 | /* If we can't read from the host interface for whatever | |
2212 | * reason, disable filtering. | |
2213 | */ | |
2214 | ret_val = e1000_mng_enable_host_if(hw); | |
2215 | if (ret_val != 0) { | |
2216 | hw->mac.tx_pkt_filtering = 0; | |
2217 | return ret_val; | |
2218 | } | |
2219 | ||
2220 | /* Read in the header. Length and offset are in dwords. */ | |
2221 | len = E1000_MNG_DHCP_COOKIE_LENGTH >> 2; | |
2222 | offset = E1000_MNG_DHCP_COOKIE_OFFSET >> 2; | |
2223 | for (i = 0; i < len; i++) | |
2224 | *(buffer + i) = E1000_READ_REG_ARRAY(hw, E1000_HOST_IF, offset + i); | |
2225 | hdr_csum = hdr->checksum; | |
2226 | hdr->checksum = 0; | |
2227 | csum = e1000_calculate_checksum((u8 *)hdr, | |
2228 | E1000_MNG_DHCP_COOKIE_LENGTH); | |
2229 | /* If either the checksums or signature don't match, then | |
2230 | * the cookie area isn't considered valid, in which case we | |
2231 | * take the safe route of assuming Tx filtering is enabled. | |
2232 | */ | |
2233 | if ((hdr_csum != csum) || (hdr->signature != E1000_IAMT_SIGNATURE)) { | |
2234 | hw->mac.tx_pkt_filtering = 1; | |
2235 | return 1; | |
2236 | } | |
2237 | ||
2238 | /* Cookie area is valid, make the final check for filtering. */ | |
2239 | if (!(hdr->status & E1000_MNG_DHCP_COOKIE_STATUS_PARSING)) { | |
2240 | hw->mac.tx_pkt_filtering = 0; | |
2241 | return 0; | |
2242 | } | |
2243 | ||
2244 | hw->mac.tx_pkt_filtering = 1; | |
2245 | return 1; | |
2246 | } | |
2247 | ||
2248 | /** | |
2249 | * e1000_mng_write_cmd_header - Writes manageability command header | |
2250 | * @hw: pointer to the HW structure | |
2251 | * @hdr: pointer to the host interface command header | |
2252 | * | |
2253 | * Writes the command header after does the checksum calculation. | |
2254 | **/ | |
2255 | static s32 e1000_mng_write_cmd_header(struct e1000_hw *hw, | |
2256 | struct e1000_host_mng_command_header *hdr) | |
2257 | { | |
2258 | u16 i, length = sizeof(struct e1000_host_mng_command_header); | |
2259 | ||
2260 | /* Write the whole command header structure with new checksum. */ | |
2261 | ||
2262 | hdr->checksum = e1000_calculate_checksum((u8 *)hdr, length); | |
2263 | ||
2264 | length >>= 2; | |
2265 | /* Write the relevant command block into the ram area. */ | |
2266 | for (i = 0; i < length; i++) { | |
2267 | E1000_WRITE_REG_ARRAY(hw, E1000_HOST_IF, i, | |
2268 | *((u32 *) hdr + i)); | |
2269 | e1e_flush(); | |
2270 | } | |
2271 | ||
2272 | return 0; | |
2273 | } | |
2274 | ||
2275 | /** | |
2276 | * e1000_mng_host_if_write - Writes to the manageability host interface | |
2277 | * @hw: pointer to the HW structure | |
2278 | * @buffer: pointer to the host interface buffer | |
2279 | * @length: size of the buffer | |
2280 | * @offset: location in the buffer to write to | |
2281 | * @sum: sum of the data (not checksum) | |
2282 | * | |
2283 | * This function writes the buffer content at the offset given on the host if. | |
2284 | * It also does alignment considerations to do the writes in most efficient | |
2285 | * way. Also fills up the sum of the buffer in *buffer parameter. | |
2286 | **/ | |
2287 | static s32 e1000_mng_host_if_write(struct e1000_hw *hw, u8 *buffer, | |
2288 | u16 length, u16 offset, u8 *sum) | |
2289 | { | |
2290 | u8 *tmp; | |
2291 | u8 *bufptr = buffer; | |
2292 | u32 data = 0; | |
2293 | u16 remaining, i, j, prev_bytes; | |
2294 | ||
2295 | /* sum = only sum of the data and it is not checksum */ | |
2296 | ||
2297 | if (length == 0 || offset + length > E1000_HI_MAX_MNG_DATA_LENGTH) | |
2298 | return -E1000_ERR_PARAM; | |
2299 | ||
2300 | tmp = (u8 *)&data; | |
2301 | prev_bytes = offset & 0x3; | |
2302 | offset >>= 2; | |
2303 | ||
2304 | if (prev_bytes) { | |
2305 | data = E1000_READ_REG_ARRAY(hw, E1000_HOST_IF, offset); | |
2306 | for (j = prev_bytes; j < sizeof(u32); j++) { | |
2307 | *(tmp + j) = *bufptr++; | |
2308 | *sum += *(tmp + j); | |
2309 | } | |
2310 | E1000_WRITE_REG_ARRAY(hw, E1000_HOST_IF, offset, data); | |
2311 | length -= j - prev_bytes; | |
2312 | offset++; | |
2313 | } | |
2314 | ||
2315 | remaining = length & 0x3; | |
2316 | length -= remaining; | |
2317 | ||
2318 | /* Calculate length in DWORDs */ | |
2319 | length >>= 2; | |
2320 | ||
2321 | /* The device driver writes the relevant command block into the | |
2322 | * ram area. */ | |
2323 | for (i = 0; i < length; i++) { | |
2324 | for (j = 0; j < sizeof(u32); j++) { | |
2325 | *(tmp + j) = *bufptr++; | |
2326 | *sum += *(tmp + j); | |
2327 | } | |
2328 | ||
2329 | E1000_WRITE_REG_ARRAY(hw, E1000_HOST_IF, offset + i, data); | |
2330 | } | |
2331 | if (remaining) { | |
2332 | for (j = 0; j < sizeof(u32); j++) { | |
2333 | if (j < remaining) | |
2334 | *(tmp + j) = *bufptr++; | |
2335 | else | |
2336 | *(tmp + j) = 0; | |
2337 | ||
2338 | *sum += *(tmp + j); | |
2339 | } | |
2340 | E1000_WRITE_REG_ARRAY(hw, E1000_HOST_IF, offset + i, data); | |
2341 | } | |
2342 | ||
2343 | return 0; | |
2344 | } | |
2345 | ||
2346 | /** | |
2347 | * e1000e_mng_write_dhcp_info - Writes DHCP info to host interface | |
2348 | * @hw: pointer to the HW structure | |
2349 | * @buffer: pointer to the host interface | |
2350 | * @length: size of the buffer | |
2351 | * | |
2352 | * Writes the DHCP information to the host interface. | |
2353 | **/ | |
2354 | s32 e1000e_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer, u16 length) | |
2355 | { | |
2356 | struct e1000_host_mng_command_header hdr; | |
2357 | s32 ret_val; | |
2358 | u32 hicr; | |
2359 | ||
2360 | hdr.command_id = E1000_MNG_DHCP_TX_PAYLOAD_CMD; | |
2361 | hdr.command_length = length; | |
2362 | hdr.reserved1 = 0; | |
2363 | hdr.reserved2 = 0; | |
2364 | hdr.checksum = 0; | |
2365 | ||
2366 | /* Enable the host interface */ | |
2367 | ret_val = e1000_mng_enable_host_if(hw); | |
2368 | if (ret_val) | |
2369 | return ret_val; | |
2370 | ||
2371 | /* Populate the host interface with the contents of "buffer". */ | |
2372 | ret_val = e1000_mng_host_if_write(hw, buffer, length, | |
2373 | sizeof(hdr), &(hdr.checksum)); | |
2374 | if (ret_val) | |
2375 | return ret_val; | |
2376 | ||
2377 | /* Write the manageability command header */ | |
2378 | ret_val = e1000_mng_write_cmd_header(hw, &hdr); | |
2379 | if (ret_val) | |
2380 | return ret_val; | |
2381 | ||
2382 | /* Tell the ARC a new command is pending. */ | |
2383 | hicr = er32(HICR); | |
2384 | ew32(HICR, hicr | E1000_HICR_C); | |
2385 | ||
2386 | return 0; | |
2387 | } | |
2388 | ||
2389 | /** | |
2390 | * e1000e_enable_mng_pass_thru - Enable processing of ARP's | |
2391 | * @hw: pointer to the HW structure | |
2392 | * | |
2393 | * Verifies the hardware needs to allow ARPs to be processed by the host. | |
2394 | **/ | |
2395 | bool e1000e_enable_mng_pass_thru(struct e1000_hw *hw) | |
2396 | { | |
2397 | u32 manc; | |
2398 | u32 fwsm, factps; | |
2399 | bool ret_val = 0; | |
2400 | ||
2401 | manc = er32(MANC); | |
2402 | ||
2403 | if (!(manc & E1000_MANC_RCV_TCO_EN) || | |
2404 | !(manc & E1000_MANC_EN_MAC_ADDR_FILTER)) | |
2405 | return ret_val; | |
2406 | ||
2407 | if (hw->mac.arc_subsystem_valid) { | |
2408 | fwsm = er32(FWSM); | |
2409 | factps = er32(FACTPS); | |
2410 | ||
2411 | if (!(factps & E1000_FACTPS_MNGCG) && | |
2412 | ((fwsm & E1000_FWSM_MODE_MASK) == | |
2413 | (e1000_mng_mode_pt << E1000_FWSM_MODE_SHIFT))) { | |
2414 | ret_val = 1; | |
2415 | return ret_val; | |
2416 | } | |
2417 | } else { | |
2418 | if ((manc & E1000_MANC_SMBUS_EN) && | |
2419 | !(manc & E1000_MANC_ASF_EN)) { | |
2420 | ret_val = 1; | |
2421 | return ret_val; | |
2422 | } | |
2423 | } | |
2424 | ||
2425 | return ret_val; | |
2426 | } | |
2427 | ||
2428 | s32 e1000e_read_part_num(struct e1000_hw *hw, u32 *part_num) | |
2429 | { | |
2430 | s32 ret_val; | |
2431 | u16 nvm_data; | |
2432 | ||
2433 | ret_val = e1000_read_nvm(hw, NVM_PBA_OFFSET_0, 1, &nvm_data); | |
2434 | if (ret_val) { | |
2435 | hw_dbg(hw, "NVM Read Error\n"); | |
2436 | return ret_val; | |
2437 | } | |
2438 | *part_num = (u32)(nvm_data << 16); | |
2439 | ||
2440 | ret_val = e1000_read_nvm(hw, NVM_PBA_OFFSET_1, 1, &nvm_data); | |
2441 | if (ret_val) { | |
2442 | hw_dbg(hw, "NVM Read Error\n"); | |
2443 | return ret_val; | |
2444 | } | |
2445 | *part_num |= nvm_data; | |
2446 | ||
2447 | return 0; | |
2448 | } |