Commit | Line | Data |
---|---|---|
bc7f75fa AK |
1 | /******************************************************************************* |
2 | ||
3 | Intel PRO/1000 Linux driver | |
4 | Copyright(c) 1999 - 2007 Intel Corporation. | |
5 | ||
6 | This program is free software; you can redistribute it and/or modify it | |
7 | under the terms and conditions of the GNU General Public License, | |
8 | version 2, as published by the Free Software Foundation. | |
9 | ||
10 | This program is distributed in the hope it will be useful, but WITHOUT | |
11 | ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | |
12 | FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | |
13 | more details. | |
14 | ||
15 | You should have received a copy of the GNU General Public License along with | |
16 | this program; if not, write to the Free Software Foundation, Inc., | |
17 | 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. | |
18 | ||
19 | The full GNU General Public License is included in this distribution in | |
20 | the file called "COPYING". | |
21 | ||
22 | Contact Information: | |
23 | Linux NICS <linux.nics@intel.com> | |
24 | e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> | |
25 | Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 | |
26 | ||
27 | *******************************************************************************/ | |
28 | ||
29 | #include <linux/delay.h> | |
30 | ||
31 | #include "e1000.h" | |
32 | ||
33 | static s32 e1000_get_phy_cfg_done(struct e1000_hw *hw); | |
34 | static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw); | |
35 | static s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active); | |
36 | static s32 e1000_wait_autoneg(struct e1000_hw *hw); | |
37 | ||
38 | /* Cable length tables */ | |
39 | static const u16 e1000_m88_cable_length_table[] = | |
40 | { 0, 50, 80, 110, 140, 140, E1000_CABLE_LENGTH_UNDEFINED }; | |
41 | ||
42 | static const u16 e1000_igp_2_cable_length_table[] = | |
43 | { 0, 0, 0, 0, 0, 0, 0, 0, 3, 5, 8, 11, 13, 16, 18, 21, 0, 0, 0, 3, | |
44 | 6, 10, 13, 16, 19, 23, 26, 29, 32, 35, 38, 41, 6, 10, 14, 18, 22, | |
45 | 26, 30, 33, 37, 41, 44, 48, 51, 54, 58, 61, 21, 26, 31, 35, 40, | |
46 | 44, 49, 53, 57, 61, 65, 68, 72, 75, 79, 82, 40, 45, 51, 56, 61, | |
47 | 66, 70, 75, 79, 83, 87, 91, 94, 98, 101, 104, 60, 66, 72, 77, 82, | |
48 | 87, 92, 96, 100, 104, 108, 111, 114, 117, 119, 121, 83, 89, 95, | |
49 | 100, 105, 109, 113, 116, 119, 122, 124, 104, 109, 114, 118, 121, | |
50 | 124}; | |
51 | #define IGP02E1000_CABLE_LENGTH_TABLE_SIZE \ | |
c00acf46 | 52 | ARRAY_SIZE(e1000_igp_2_cable_length_table) |
bc7f75fa AK |
53 | |
54 | /** | |
55 | * e1000e_check_reset_block_generic - Check if PHY reset is blocked | |
56 | * @hw: pointer to the HW structure | |
57 | * | |
58 | * Read the PHY management control register and check whether a PHY reset | |
59 | * is blocked. If a reset is not blocked return 0, otherwise | |
60 | * return E1000_BLK_PHY_RESET (12). | |
61 | **/ | |
62 | s32 e1000e_check_reset_block_generic(struct e1000_hw *hw) | |
63 | { | |
64 | u32 manc; | |
65 | ||
66 | manc = er32(MANC); | |
67 | ||
68 | return (manc & E1000_MANC_BLK_PHY_RST_ON_IDE) ? | |
69 | E1000_BLK_PHY_RESET : 0; | |
70 | } | |
71 | ||
72 | /** | |
73 | * e1000e_get_phy_id - Retrieve the PHY ID and revision | |
74 | * @hw: pointer to the HW structure | |
75 | * | |
76 | * Reads the PHY registers and stores the PHY ID and possibly the PHY | |
77 | * revision in the hardware structure. | |
78 | **/ | |
79 | s32 e1000e_get_phy_id(struct e1000_hw *hw) | |
80 | { | |
81 | struct e1000_phy_info *phy = &hw->phy; | |
82 | s32 ret_val; | |
83 | u16 phy_id; | |
84 | ||
85 | ret_val = e1e_rphy(hw, PHY_ID1, &phy_id); | |
86 | if (ret_val) | |
87 | return ret_val; | |
88 | ||
89 | phy->id = (u32)(phy_id << 16); | |
90 | udelay(20); | |
91 | ret_val = e1e_rphy(hw, PHY_ID2, &phy_id); | |
92 | if (ret_val) | |
93 | return ret_val; | |
94 | ||
95 | phy->id |= (u32)(phy_id & PHY_REVISION_MASK); | |
96 | phy->revision = (u32)(phy_id & ~PHY_REVISION_MASK); | |
97 | ||
98 | return 0; | |
99 | } | |
100 | ||
101 | /** | |
102 | * e1000e_phy_reset_dsp - Reset PHY DSP | |
103 | * @hw: pointer to the HW structure | |
104 | * | |
105 | * Reset the digital signal processor. | |
106 | **/ | |
107 | s32 e1000e_phy_reset_dsp(struct e1000_hw *hw) | |
108 | { | |
109 | s32 ret_val; | |
110 | ||
111 | ret_val = e1e_wphy(hw, M88E1000_PHY_GEN_CONTROL, 0xC1); | |
112 | if (ret_val) | |
113 | return ret_val; | |
114 | ||
115 | return e1e_wphy(hw, M88E1000_PHY_GEN_CONTROL, 0); | |
116 | } | |
117 | ||
118 | /** | |
119 | * e1000_read_phy_reg_mdic - Read MDI control register | |
120 | * @hw: pointer to the HW structure | |
121 | * @offset: register offset to be read | |
122 | * @data: pointer to the read data | |
123 | * | |
124 | * Reads the MDI control regsiter in the PHY at offset and stores the | |
125 | * information read to data. | |
126 | **/ | |
127 | static s32 e1000_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data) | |
128 | { | |
129 | struct e1000_phy_info *phy = &hw->phy; | |
130 | u32 i, mdic = 0; | |
131 | ||
132 | if (offset > MAX_PHY_REG_ADDRESS) { | |
133 | hw_dbg(hw, "PHY Address %d is out of range\n", offset); | |
134 | return -E1000_ERR_PARAM; | |
135 | } | |
136 | ||
137 | /* Set up Op-code, Phy Address, and register offset in the MDI | |
138 | * Control register. The MAC will take care of interfacing with the | |
139 | * PHY to retrieve the desired data. | |
140 | */ | |
141 | mdic = ((offset << E1000_MDIC_REG_SHIFT) | | |
142 | (phy->addr << E1000_MDIC_PHY_SHIFT) | | |
143 | (E1000_MDIC_OP_READ)); | |
144 | ||
145 | ew32(MDIC, mdic); | |
146 | ||
147 | /* Poll the ready bit to see if the MDI read completed */ | |
148 | for (i = 0; i < 64; i++) { | |
149 | udelay(50); | |
150 | mdic = er32(MDIC); | |
151 | if (mdic & E1000_MDIC_READY) | |
152 | break; | |
153 | } | |
154 | if (!(mdic & E1000_MDIC_READY)) { | |
155 | hw_dbg(hw, "MDI Read did not complete\n"); | |
156 | return -E1000_ERR_PHY; | |
157 | } | |
158 | if (mdic & E1000_MDIC_ERROR) { | |
159 | hw_dbg(hw, "MDI Error\n"); | |
160 | return -E1000_ERR_PHY; | |
161 | } | |
162 | *data = (u16) mdic; | |
163 | ||
164 | return 0; | |
165 | } | |
166 | ||
167 | /** | |
168 | * e1000_write_phy_reg_mdic - Write MDI control register | |
169 | * @hw: pointer to the HW structure | |
170 | * @offset: register offset to write to | |
171 | * @data: data to write to register at offset | |
172 | * | |
173 | * Writes data to MDI control register in the PHY at offset. | |
174 | **/ | |
175 | static s32 e1000_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data) | |
176 | { | |
177 | struct e1000_phy_info *phy = &hw->phy; | |
178 | u32 i, mdic = 0; | |
179 | ||
180 | if (offset > MAX_PHY_REG_ADDRESS) { | |
181 | hw_dbg(hw, "PHY Address %d is out of range\n", offset); | |
182 | return -E1000_ERR_PARAM; | |
183 | } | |
184 | ||
185 | /* Set up Op-code, Phy Address, and register offset in the MDI | |
186 | * Control register. The MAC will take care of interfacing with the | |
187 | * PHY to retrieve the desired data. | |
188 | */ | |
189 | mdic = (((u32)data) | | |
190 | (offset << E1000_MDIC_REG_SHIFT) | | |
191 | (phy->addr << E1000_MDIC_PHY_SHIFT) | | |
192 | (E1000_MDIC_OP_WRITE)); | |
193 | ||
194 | ew32(MDIC, mdic); | |
195 | ||
196 | /* Poll the ready bit to see if the MDI read completed */ | |
197 | for (i = 0; i < E1000_GEN_POLL_TIMEOUT; i++) { | |
198 | udelay(5); | |
199 | mdic = er32(MDIC); | |
200 | if (mdic & E1000_MDIC_READY) | |
201 | break; | |
202 | } | |
203 | if (!(mdic & E1000_MDIC_READY)) { | |
204 | hw_dbg(hw, "MDI Write did not complete\n"); | |
205 | return -E1000_ERR_PHY; | |
206 | } | |
207 | ||
208 | return 0; | |
209 | } | |
210 | ||
211 | /** | |
212 | * e1000e_read_phy_reg_m88 - Read m88 PHY register | |
213 | * @hw: pointer to the HW structure | |
214 | * @offset: register offset to be read | |
215 | * @data: pointer to the read data | |
216 | * | |
217 | * Acquires semaphore, if necessary, then reads the PHY register at offset | |
218 | * and storing the retrieved information in data. Release any acquired | |
219 | * semaphores before exiting. | |
220 | **/ | |
221 | s32 e1000e_read_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 *data) | |
222 | { | |
223 | s32 ret_val; | |
224 | ||
225 | ret_val = hw->phy.ops.acquire_phy(hw); | |
226 | if (ret_val) | |
227 | return ret_val; | |
228 | ||
229 | ret_val = e1000_read_phy_reg_mdic(hw, | |
230 | MAX_PHY_REG_ADDRESS & offset, | |
231 | data); | |
232 | ||
233 | hw->phy.ops.release_phy(hw); | |
234 | ||
235 | return ret_val; | |
236 | } | |
237 | ||
238 | /** | |
239 | * e1000e_write_phy_reg_m88 - Write m88 PHY register | |
240 | * @hw: pointer to the HW structure | |
241 | * @offset: register offset to write to | |
242 | * @data: data to write at register offset | |
243 | * | |
244 | * Acquires semaphore, if necessary, then writes the data to PHY register | |
245 | * at the offset. Release any acquired semaphores before exiting. | |
246 | **/ | |
247 | s32 e1000e_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data) | |
248 | { | |
249 | s32 ret_val; | |
250 | ||
251 | ret_val = hw->phy.ops.acquire_phy(hw); | |
252 | if (ret_val) | |
253 | return ret_val; | |
254 | ||
255 | ret_val = e1000_write_phy_reg_mdic(hw, | |
256 | MAX_PHY_REG_ADDRESS & offset, | |
257 | data); | |
258 | ||
259 | hw->phy.ops.release_phy(hw); | |
260 | ||
261 | return ret_val; | |
262 | } | |
263 | ||
264 | /** | |
265 | * e1000e_read_phy_reg_igp - Read igp PHY register | |
266 | * @hw: pointer to the HW structure | |
267 | * @offset: register offset to be read | |
268 | * @data: pointer to the read data | |
269 | * | |
270 | * Acquires semaphore, if necessary, then reads the PHY register at offset | |
271 | * and storing the retrieved information in data. Release any acquired | |
272 | * semaphores before exiting. | |
273 | **/ | |
274 | s32 e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data) | |
275 | { | |
276 | s32 ret_val; | |
277 | ||
278 | ret_val = hw->phy.ops.acquire_phy(hw); | |
279 | if (ret_val) | |
280 | return ret_val; | |
281 | ||
282 | if (offset > MAX_PHY_MULTI_PAGE_REG) { | |
283 | ret_val = e1000_write_phy_reg_mdic(hw, | |
284 | IGP01E1000_PHY_PAGE_SELECT, | |
285 | (u16)offset); | |
286 | if (ret_val) { | |
287 | hw->phy.ops.release_phy(hw); | |
288 | return ret_val; | |
289 | } | |
290 | } | |
291 | ||
292 | ret_val = e1000_read_phy_reg_mdic(hw, | |
293 | MAX_PHY_REG_ADDRESS & offset, | |
294 | data); | |
295 | ||
296 | hw->phy.ops.release_phy(hw); | |
297 | ||
298 | return ret_val; | |
299 | } | |
300 | ||
301 | /** | |
302 | * e1000e_write_phy_reg_igp - Write igp PHY register | |
303 | * @hw: pointer to the HW structure | |
304 | * @offset: register offset to write to | |
305 | * @data: data to write at register offset | |
306 | * | |
307 | * Acquires semaphore, if necessary, then writes the data to PHY register | |
308 | * at the offset. Release any acquired semaphores before exiting. | |
309 | **/ | |
310 | s32 e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data) | |
311 | { | |
312 | s32 ret_val; | |
313 | ||
314 | ret_val = hw->phy.ops.acquire_phy(hw); | |
315 | if (ret_val) | |
316 | return ret_val; | |
317 | ||
318 | if (offset > MAX_PHY_MULTI_PAGE_REG) { | |
319 | ret_val = e1000_write_phy_reg_mdic(hw, | |
320 | IGP01E1000_PHY_PAGE_SELECT, | |
321 | (u16)offset); | |
322 | if (ret_val) { | |
323 | hw->phy.ops.release_phy(hw); | |
324 | return ret_val; | |
325 | } | |
326 | } | |
327 | ||
328 | ret_val = e1000_write_phy_reg_mdic(hw, | |
329 | MAX_PHY_REG_ADDRESS & offset, | |
330 | data); | |
331 | ||
332 | hw->phy.ops.release_phy(hw); | |
333 | ||
334 | return ret_val; | |
335 | } | |
336 | ||
337 | /** | |
338 | * e1000e_read_kmrn_reg - Read kumeran register | |
339 | * @hw: pointer to the HW structure | |
340 | * @offset: register offset to be read | |
341 | * @data: pointer to the read data | |
342 | * | |
343 | * Acquires semaphore, if necessary. Then reads the PHY register at offset | |
344 | * using the kumeran interface. The information retrieved is stored in data. | |
345 | * Release any acquired semaphores before exiting. | |
346 | **/ | |
347 | s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data) | |
348 | { | |
349 | u32 kmrnctrlsta; | |
350 | s32 ret_val; | |
351 | ||
352 | ret_val = hw->phy.ops.acquire_phy(hw); | |
353 | if (ret_val) | |
354 | return ret_val; | |
355 | ||
356 | kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) & | |
357 | E1000_KMRNCTRLSTA_OFFSET) | E1000_KMRNCTRLSTA_REN; | |
358 | ew32(KMRNCTRLSTA, kmrnctrlsta); | |
359 | ||
360 | udelay(2); | |
361 | ||
362 | kmrnctrlsta = er32(KMRNCTRLSTA); | |
363 | *data = (u16)kmrnctrlsta; | |
364 | ||
365 | hw->phy.ops.release_phy(hw); | |
366 | ||
367 | return ret_val; | |
368 | } | |
369 | ||
370 | /** | |
371 | * e1000e_write_kmrn_reg - Write kumeran register | |
372 | * @hw: pointer to the HW structure | |
373 | * @offset: register offset to write to | |
374 | * @data: data to write at register offset | |
375 | * | |
376 | * Acquires semaphore, if necessary. Then write the data to PHY register | |
377 | * at the offset using the kumeran interface. Release any acquired semaphores | |
378 | * before exiting. | |
379 | **/ | |
380 | s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data) | |
381 | { | |
382 | u32 kmrnctrlsta; | |
383 | s32 ret_val; | |
384 | ||
385 | ret_val = hw->phy.ops.acquire_phy(hw); | |
386 | if (ret_val) | |
387 | return ret_val; | |
388 | ||
389 | kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) & | |
390 | E1000_KMRNCTRLSTA_OFFSET) | data; | |
391 | ew32(KMRNCTRLSTA, kmrnctrlsta); | |
392 | ||
393 | udelay(2); | |
394 | hw->phy.ops.release_phy(hw); | |
395 | ||
396 | return ret_val; | |
397 | } | |
398 | ||
399 | /** | |
400 | * e1000e_copper_link_setup_m88 - Setup m88 PHY's for copper link | |
401 | * @hw: pointer to the HW structure | |
402 | * | |
403 | * Sets up MDI/MDI-X and polarity for m88 PHY's. If necessary, transmit clock | |
404 | * and downshift values are set also. | |
405 | **/ | |
406 | s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw) | |
407 | { | |
408 | struct e1000_phy_info *phy = &hw->phy; | |
409 | s32 ret_val; | |
410 | u16 phy_data; | |
411 | ||
412 | /* Enable CRS on TX. This must be set for half-duplex operation. */ | |
413 | ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); | |
414 | if (ret_val) | |
415 | return ret_val; | |
416 | ||
417 | phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX; | |
418 | ||
419 | /* Options: | |
420 | * MDI/MDI-X = 0 (default) | |
421 | * 0 - Auto for all speeds | |
422 | * 1 - MDI mode | |
423 | * 2 - MDI-X mode | |
424 | * 3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes) | |
425 | */ | |
426 | phy_data &= ~M88E1000_PSCR_AUTO_X_MODE; | |
427 | ||
428 | switch (phy->mdix) { | |
429 | case 1: | |
430 | phy_data |= M88E1000_PSCR_MDI_MANUAL_MODE; | |
431 | break; | |
432 | case 2: | |
433 | phy_data |= M88E1000_PSCR_MDIX_MANUAL_MODE; | |
434 | break; | |
435 | case 3: | |
436 | phy_data |= M88E1000_PSCR_AUTO_X_1000T; | |
437 | break; | |
438 | case 0: | |
439 | default: | |
440 | phy_data |= M88E1000_PSCR_AUTO_X_MODE; | |
441 | break; | |
442 | } | |
443 | ||
444 | /* Options: | |
445 | * disable_polarity_correction = 0 (default) | |
446 | * Automatic Correction for Reversed Cable Polarity | |
447 | * 0 - Disabled | |
448 | * 1 - Enabled | |
449 | */ | |
450 | phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL; | |
451 | if (phy->disable_polarity_correction == 1) | |
452 | phy_data |= M88E1000_PSCR_POLARITY_REVERSAL; | |
453 | ||
454 | ret_val = e1e_wphy(hw, M88E1000_PHY_SPEC_CTRL, phy_data); | |
455 | if (ret_val) | |
456 | return ret_val; | |
457 | ||
458 | if (phy->revision < 4) { | |
459 | /* Force TX_CLK in the Extended PHY Specific Control Register | |
460 | * to 25MHz clock. | |
461 | */ | |
462 | ret_val = e1e_rphy(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data); | |
463 | if (ret_val) | |
464 | return ret_val; | |
465 | ||
466 | phy_data |= M88E1000_EPSCR_TX_CLK_25; | |
467 | ||
468 | if ((phy->revision == 2) && | |
469 | (phy->id == M88E1111_I_PHY_ID)) { | |
470 | /* 82573L PHY - set the downshift counter to 5x. */ | |
471 | phy_data &= ~M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK; | |
472 | phy_data |= M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X; | |
473 | } else { | |
474 | /* Configure Master and Slave downshift values */ | |
475 | phy_data &= ~(M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK | | |
476 | M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK); | |
477 | phy_data |= (M88E1000_EPSCR_MASTER_DOWNSHIFT_1X | | |
478 | M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X); | |
479 | } | |
480 | ret_val = e1e_wphy(hw, M88E1000_EXT_PHY_SPEC_CTRL, phy_data); | |
481 | if (ret_val) | |
482 | return ret_val; | |
483 | } | |
484 | ||
485 | /* Commit the changes. */ | |
486 | ret_val = e1000e_commit_phy(hw); | |
487 | if (ret_val) | |
488 | hw_dbg(hw, "Error committing the PHY changes\n"); | |
489 | ||
490 | return ret_val; | |
491 | } | |
492 | ||
493 | /** | |
494 | * e1000e_copper_link_setup_igp - Setup igp PHY's for copper link | |
495 | * @hw: pointer to the HW structure | |
496 | * | |
497 | * Sets up LPLU, MDI/MDI-X, polarity, Smartspeed and Master/Slave config for | |
498 | * igp PHY's. | |
499 | **/ | |
500 | s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw) | |
501 | { | |
502 | struct e1000_phy_info *phy = &hw->phy; | |
503 | s32 ret_val; | |
504 | u16 data; | |
505 | ||
506 | ret_val = e1000_phy_hw_reset(hw); | |
507 | if (ret_val) { | |
508 | hw_dbg(hw, "Error resetting the PHY.\n"); | |
509 | return ret_val; | |
510 | } | |
511 | ||
512 | /* Wait 15ms for MAC to configure PHY from NVM settings. */ | |
513 | msleep(15); | |
514 | ||
515 | /* disable lplu d0 during driver init */ | |
516 | ret_val = e1000_set_d0_lplu_state(hw, 0); | |
517 | if (ret_val) { | |
518 | hw_dbg(hw, "Error Disabling LPLU D0\n"); | |
519 | return ret_val; | |
520 | } | |
521 | /* Configure mdi-mdix settings */ | |
522 | ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CTRL, &data); | |
523 | if (ret_val) | |
524 | return ret_val; | |
525 | ||
526 | data &= ~IGP01E1000_PSCR_AUTO_MDIX; | |
527 | ||
528 | switch (phy->mdix) { | |
529 | case 1: | |
530 | data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX; | |
531 | break; | |
532 | case 2: | |
533 | data |= IGP01E1000_PSCR_FORCE_MDI_MDIX; | |
534 | break; | |
535 | case 0: | |
536 | default: | |
537 | data |= IGP01E1000_PSCR_AUTO_MDIX; | |
538 | break; | |
539 | } | |
540 | ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CTRL, data); | |
541 | if (ret_val) | |
542 | return ret_val; | |
543 | ||
544 | /* set auto-master slave resolution settings */ | |
545 | if (hw->mac.autoneg) { | |
546 | /* when autonegotiation advertisement is only 1000Mbps then we | |
547 | * should disable SmartSpeed and enable Auto MasterSlave | |
548 | * resolution as hardware default. */ | |
549 | if (phy->autoneg_advertised == ADVERTISE_1000_FULL) { | |
550 | /* Disable SmartSpeed */ | |
551 | ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG, | |
552 | &data); | |
553 | if (ret_val) | |
554 | return ret_val; | |
555 | ||
556 | data &= ~IGP01E1000_PSCFR_SMART_SPEED; | |
557 | ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG, | |
558 | data); | |
559 | if (ret_val) | |
560 | return ret_val; | |
561 | ||
562 | /* Set auto Master/Slave resolution process */ | |
563 | ret_val = e1e_rphy(hw, PHY_1000T_CTRL, &data); | |
564 | if (ret_val) | |
565 | return ret_val; | |
566 | ||
567 | data &= ~CR_1000T_MS_ENABLE; | |
568 | ret_val = e1e_wphy(hw, PHY_1000T_CTRL, data); | |
569 | if (ret_val) | |
570 | return ret_val; | |
571 | } | |
572 | ||
573 | ret_val = e1e_rphy(hw, PHY_1000T_CTRL, &data); | |
574 | if (ret_val) | |
575 | return ret_val; | |
576 | ||
577 | /* load defaults for future use */ | |
578 | phy->original_ms_type = (data & CR_1000T_MS_ENABLE) ? | |
579 | ((data & CR_1000T_MS_VALUE) ? | |
580 | e1000_ms_force_master : | |
581 | e1000_ms_force_slave) : | |
582 | e1000_ms_auto; | |
583 | ||
584 | switch (phy->ms_type) { | |
585 | case e1000_ms_force_master: | |
586 | data |= (CR_1000T_MS_ENABLE | CR_1000T_MS_VALUE); | |
587 | break; | |
588 | case e1000_ms_force_slave: | |
589 | data |= CR_1000T_MS_ENABLE; | |
590 | data &= ~(CR_1000T_MS_VALUE); | |
591 | break; | |
592 | case e1000_ms_auto: | |
593 | data &= ~CR_1000T_MS_ENABLE; | |
594 | default: | |
595 | break; | |
596 | } | |
597 | ret_val = e1e_wphy(hw, PHY_1000T_CTRL, data); | |
598 | } | |
599 | ||
600 | return ret_val; | |
601 | } | |
602 | ||
603 | /** | |
604 | * e1000_phy_setup_autoneg - Configure PHY for auto-negotiation | |
605 | * @hw: pointer to the HW structure | |
606 | * | |
607 | * Reads the MII auto-neg advertisement register and/or the 1000T control | |
608 | * register and if the PHY is already setup for auto-negotiation, then | |
609 | * return successful. Otherwise, setup advertisement and flow control to | |
610 | * the appropriate values for the wanted auto-negotiation. | |
611 | **/ | |
612 | static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) | |
613 | { | |
614 | struct e1000_phy_info *phy = &hw->phy; | |
615 | s32 ret_val; | |
616 | u16 mii_autoneg_adv_reg; | |
617 | u16 mii_1000t_ctrl_reg = 0; | |
618 | ||
619 | phy->autoneg_advertised &= phy->autoneg_mask; | |
620 | ||
621 | /* Read the MII Auto-Neg Advertisement Register (Address 4). */ | |
622 | ret_val = e1e_rphy(hw, PHY_AUTONEG_ADV, &mii_autoneg_adv_reg); | |
623 | if (ret_val) | |
624 | return ret_val; | |
625 | ||
626 | if (phy->autoneg_mask & ADVERTISE_1000_FULL) { | |
627 | /* Read the MII 1000Base-T Control Register (Address 9). */ | |
628 | ret_val = e1e_rphy(hw, PHY_1000T_CTRL, &mii_1000t_ctrl_reg); | |
629 | if (ret_val) | |
630 | return ret_val; | |
631 | } | |
632 | ||
633 | /* Need to parse both autoneg_advertised and fc and set up | |
634 | * the appropriate PHY registers. First we will parse for | |
635 | * autoneg_advertised software override. Since we can advertise | |
636 | * a plethora of combinations, we need to check each bit | |
637 | * individually. | |
638 | */ | |
639 | ||
640 | /* First we clear all the 10/100 mb speed bits in the Auto-Neg | |
641 | * Advertisement Register (Address 4) and the 1000 mb speed bits in | |
642 | * the 1000Base-T Control Register (Address 9). | |
643 | */ | |
644 | mii_autoneg_adv_reg &= ~(NWAY_AR_100TX_FD_CAPS | | |
645 | NWAY_AR_100TX_HD_CAPS | | |
646 | NWAY_AR_10T_FD_CAPS | | |
647 | NWAY_AR_10T_HD_CAPS); | |
648 | mii_1000t_ctrl_reg &= ~(CR_1000T_HD_CAPS | CR_1000T_FD_CAPS); | |
649 | ||
650 | hw_dbg(hw, "autoneg_advertised %x\n", phy->autoneg_advertised); | |
651 | ||
652 | /* Do we want to advertise 10 Mb Half Duplex? */ | |
653 | if (phy->autoneg_advertised & ADVERTISE_10_HALF) { | |
654 | hw_dbg(hw, "Advertise 10mb Half duplex\n"); | |
655 | mii_autoneg_adv_reg |= NWAY_AR_10T_HD_CAPS; | |
656 | } | |
657 | ||
658 | /* Do we want to advertise 10 Mb Full Duplex? */ | |
659 | if (phy->autoneg_advertised & ADVERTISE_10_FULL) { | |
660 | hw_dbg(hw, "Advertise 10mb Full duplex\n"); | |
661 | mii_autoneg_adv_reg |= NWAY_AR_10T_FD_CAPS; | |
662 | } | |
663 | ||
664 | /* Do we want to advertise 100 Mb Half Duplex? */ | |
665 | if (phy->autoneg_advertised & ADVERTISE_100_HALF) { | |
666 | hw_dbg(hw, "Advertise 100mb Half duplex\n"); | |
667 | mii_autoneg_adv_reg |= NWAY_AR_100TX_HD_CAPS; | |
668 | } | |
669 | ||
670 | /* Do we want to advertise 100 Mb Full Duplex? */ | |
671 | if (phy->autoneg_advertised & ADVERTISE_100_FULL) { | |
672 | hw_dbg(hw, "Advertise 100mb Full duplex\n"); | |
673 | mii_autoneg_adv_reg |= NWAY_AR_100TX_FD_CAPS; | |
674 | } | |
675 | ||
676 | /* We do not allow the Phy to advertise 1000 Mb Half Duplex */ | |
677 | if (phy->autoneg_advertised & ADVERTISE_1000_HALF) | |
678 | hw_dbg(hw, "Advertise 1000mb Half duplex request denied!\n"); | |
679 | ||
680 | /* Do we want to advertise 1000 Mb Full Duplex? */ | |
681 | if (phy->autoneg_advertised & ADVERTISE_1000_FULL) { | |
682 | hw_dbg(hw, "Advertise 1000mb Full duplex\n"); | |
683 | mii_1000t_ctrl_reg |= CR_1000T_FD_CAPS; | |
684 | } | |
685 | ||
686 | /* Check for a software override of the flow control settings, and | |
687 | * setup the PHY advertisement registers accordingly. If | |
688 | * auto-negotiation is enabled, then software will have to set the | |
689 | * "PAUSE" bits to the correct value in the Auto-Negotiation | |
690 | * Advertisement Register (PHY_AUTONEG_ADV) and re-start auto- | |
691 | * negotiation. | |
692 | * | |
693 | * The possible values of the "fc" parameter are: | |
694 | * 0: Flow control is completely disabled | |
695 | * 1: Rx flow control is enabled (we can receive pause frames | |
696 | * but not send pause frames). | |
697 | * 2: Tx flow control is enabled (we can send pause frames | |
698 | * but we do not support receiving pause frames). | |
699 | * 3: Both Rx and TX flow control (symmetric) are enabled. | |
700 | * other: No software override. The flow control configuration | |
701 | * in the EEPROM is used. | |
702 | */ | |
703 | switch (hw->mac.fc) { | |
704 | case e1000_fc_none: | |
705 | /* Flow control (RX & TX) is completely disabled by a | |
706 | * software over-ride. | |
707 | */ | |
708 | mii_autoneg_adv_reg &= ~(NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); | |
709 | break; | |
710 | case e1000_fc_rx_pause: | |
711 | /* RX Flow control is enabled, and TX Flow control is | |
712 | * disabled, by a software over-ride. | |
713 | */ | |
714 | /* Since there really isn't a way to advertise that we are | |
715 | * capable of RX Pause ONLY, we will advertise that we | |
716 | * support both symmetric and asymmetric RX PAUSE. Later | |
717 | * (in e1000e_config_fc_after_link_up) we will disable the | |
718 | * hw's ability to send PAUSE frames. | |
719 | */ | |
720 | mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); | |
721 | break; | |
722 | case e1000_fc_tx_pause: | |
723 | /* TX Flow control is enabled, and RX Flow control is | |
724 | * disabled, by a software over-ride. | |
725 | */ | |
726 | mii_autoneg_adv_reg |= NWAY_AR_ASM_DIR; | |
727 | mii_autoneg_adv_reg &= ~NWAY_AR_PAUSE; | |
728 | break; | |
729 | case e1000_fc_full: | |
730 | /* Flow control (both RX and TX) is enabled by a software | |
731 | * over-ride. | |
732 | */ | |
733 | mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); | |
734 | break; | |
735 | default: | |
736 | hw_dbg(hw, "Flow control param set incorrectly\n"); | |
737 | ret_val = -E1000_ERR_CONFIG; | |
738 | return ret_val; | |
739 | } | |
740 | ||
741 | ret_val = e1e_wphy(hw, PHY_AUTONEG_ADV, mii_autoneg_adv_reg); | |
742 | if (ret_val) | |
743 | return ret_val; | |
744 | ||
745 | hw_dbg(hw, "Auto-Neg Advertising %x\n", mii_autoneg_adv_reg); | |
746 | ||
747 | if (phy->autoneg_mask & ADVERTISE_1000_FULL) { | |
748 | ret_val = e1e_wphy(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg); | |
749 | } | |
750 | ||
751 | return ret_val; | |
752 | } | |
753 | ||
754 | /** | |
755 | * e1000_copper_link_autoneg - Setup/Enable autoneg for copper link | |
756 | * @hw: pointer to the HW structure | |
757 | * | |
758 | * Performs initial bounds checking on autoneg advertisement parameter, then | |
759 | * configure to advertise the full capability. Setup the PHY to autoneg | |
760 | * and restart the negotiation process between the link partner. If | |
761 | * wait_for_link, then wait for autoneg to complete before exiting. | |
762 | **/ | |
763 | static s32 e1000_copper_link_autoneg(struct e1000_hw *hw) | |
764 | { | |
765 | struct e1000_phy_info *phy = &hw->phy; | |
766 | s32 ret_val; | |
767 | u16 phy_ctrl; | |
768 | ||
769 | /* Perform some bounds checking on the autoneg advertisement | |
770 | * parameter. | |
771 | */ | |
772 | phy->autoneg_advertised &= phy->autoneg_mask; | |
773 | ||
774 | /* If autoneg_advertised is zero, we assume it was not defaulted | |
775 | * by the calling code so we set to advertise full capability. | |
776 | */ | |
777 | if (phy->autoneg_advertised == 0) | |
778 | phy->autoneg_advertised = phy->autoneg_mask; | |
779 | ||
780 | hw_dbg(hw, "Reconfiguring auto-neg advertisement params\n"); | |
781 | ret_val = e1000_phy_setup_autoneg(hw); | |
782 | if (ret_val) { | |
783 | hw_dbg(hw, "Error Setting up Auto-Negotiation\n"); | |
784 | return ret_val; | |
785 | } | |
786 | hw_dbg(hw, "Restarting Auto-Neg\n"); | |
787 | ||
788 | /* Restart auto-negotiation by setting the Auto Neg Enable bit and | |
789 | * the Auto Neg Restart bit in the PHY control register. | |
790 | */ | |
791 | ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_ctrl); | |
792 | if (ret_val) | |
793 | return ret_val; | |
794 | ||
795 | phy_ctrl |= (MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG); | |
796 | ret_val = e1e_wphy(hw, PHY_CONTROL, phy_ctrl); | |
797 | if (ret_val) | |
798 | return ret_val; | |
799 | ||
800 | /* Does the user want to wait for Auto-Neg to complete here, or | |
801 | * check at a later time (for example, callback routine). | |
802 | */ | |
803 | if (phy->wait_for_link) { | |
804 | ret_val = e1000_wait_autoneg(hw); | |
805 | if (ret_val) { | |
806 | hw_dbg(hw, "Error while waiting for " | |
807 | "autoneg to complete\n"); | |
808 | return ret_val; | |
809 | } | |
810 | } | |
811 | ||
812 | hw->mac.get_link_status = 1; | |
813 | ||
814 | return ret_val; | |
815 | } | |
816 | ||
817 | /** | |
818 | * e1000e_setup_copper_link - Configure copper link settings | |
819 | * @hw: pointer to the HW structure | |
820 | * | |
821 | * Calls the appropriate function to configure the link for auto-neg or forced | |
822 | * speed and duplex. Then we check for link, once link is established calls | |
823 | * to configure collision distance and flow control are called. If link is | |
824 | * not established, we return -E1000_ERR_PHY (-2). | |
825 | **/ | |
826 | s32 e1000e_setup_copper_link(struct e1000_hw *hw) | |
827 | { | |
828 | s32 ret_val; | |
829 | bool link; | |
830 | ||
831 | if (hw->mac.autoneg) { | |
832 | /* Setup autoneg and flow control advertisement and perform | |
833 | * autonegotiation. */ | |
834 | ret_val = e1000_copper_link_autoneg(hw); | |
835 | if (ret_val) | |
836 | return ret_val; | |
837 | } else { | |
838 | /* PHY will be set to 10H, 10F, 100H or 100F | |
839 | * depending on user settings. */ | |
840 | hw_dbg(hw, "Forcing Speed and Duplex\n"); | |
841 | ret_val = e1000_phy_force_speed_duplex(hw); | |
842 | if (ret_val) { | |
843 | hw_dbg(hw, "Error Forcing Speed and Duplex\n"); | |
844 | return ret_val; | |
845 | } | |
846 | } | |
847 | ||
848 | /* Check link status. Wait up to 100 microseconds for link to become | |
849 | * valid. | |
850 | */ | |
851 | ret_val = e1000e_phy_has_link_generic(hw, | |
852 | COPPER_LINK_UP_LIMIT, | |
853 | 10, | |
854 | &link); | |
855 | if (ret_val) | |
856 | return ret_val; | |
857 | ||
858 | if (link) { | |
859 | hw_dbg(hw, "Valid link established!!!\n"); | |
860 | e1000e_config_collision_dist(hw); | |
861 | ret_val = e1000e_config_fc_after_link_up(hw); | |
862 | } else { | |
863 | hw_dbg(hw, "Unable to establish link!!!\n"); | |
864 | } | |
865 | ||
866 | return ret_val; | |
867 | } | |
868 | ||
869 | /** | |
870 | * e1000e_phy_force_speed_duplex_igp - Force speed/duplex for igp PHY | |
871 | * @hw: pointer to the HW structure | |
872 | * | |
873 | * Calls the PHY setup function to force speed and duplex. Clears the | |
874 | * auto-crossover to force MDI manually. Waits for link and returns | |
875 | * successful if link up is successful, else -E1000_ERR_PHY (-2). | |
876 | **/ | |
877 | s32 e1000e_phy_force_speed_duplex_igp(struct e1000_hw *hw) | |
878 | { | |
879 | struct e1000_phy_info *phy = &hw->phy; | |
880 | s32 ret_val; | |
881 | u16 phy_data; | |
882 | bool link; | |
883 | ||
884 | ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_data); | |
885 | if (ret_val) | |
886 | return ret_val; | |
887 | ||
888 | e1000e_phy_force_speed_duplex_setup(hw, &phy_data); | |
889 | ||
890 | ret_val = e1e_wphy(hw, PHY_CONTROL, phy_data); | |
891 | if (ret_val) | |
892 | return ret_val; | |
893 | ||
894 | /* Clear Auto-Crossover to force MDI manually. IGP requires MDI | |
895 | * forced whenever speed and duplex are forced. | |
896 | */ | |
897 | ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CTRL, &phy_data); | |
898 | if (ret_val) | |
899 | return ret_val; | |
900 | ||
901 | phy_data &= ~IGP01E1000_PSCR_AUTO_MDIX; | |
902 | phy_data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX; | |
903 | ||
904 | ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CTRL, phy_data); | |
905 | if (ret_val) | |
906 | return ret_val; | |
907 | ||
908 | hw_dbg(hw, "IGP PSCR: %X\n", phy_data); | |
909 | ||
910 | udelay(1); | |
911 | ||
912 | if (phy->wait_for_link) { | |
913 | hw_dbg(hw, "Waiting for forced speed/duplex link on IGP phy.\n"); | |
914 | ||
915 | ret_val = e1000e_phy_has_link_generic(hw, | |
916 | PHY_FORCE_LIMIT, | |
917 | 100000, | |
918 | &link); | |
919 | if (ret_val) | |
920 | return ret_val; | |
921 | ||
922 | if (!link) | |
923 | hw_dbg(hw, "Link taking longer than expected.\n"); | |
924 | ||
925 | /* Try once more */ | |
926 | ret_val = e1000e_phy_has_link_generic(hw, | |
927 | PHY_FORCE_LIMIT, | |
928 | 100000, | |
929 | &link); | |
930 | if (ret_val) | |
931 | return ret_val; | |
932 | } | |
933 | ||
934 | return ret_val; | |
935 | } | |
936 | ||
937 | /** | |
938 | * e1000e_phy_force_speed_duplex_m88 - Force speed/duplex for m88 PHY | |
939 | * @hw: pointer to the HW structure | |
940 | * | |
941 | * Calls the PHY setup function to force speed and duplex. Clears the | |
942 | * auto-crossover to force MDI manually. Resets the PHY to commit the | |
943 | * changes. If time expires while waiting for link up, we reset the DSP. | |
944 | * After reset, TX_CLK and CRS on TX must be set. Return successful upon | |
945 | * successful completion, else return corresponding error code. | |
946 | **/ | |
947 | s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw) | |
948 | { | |
949 | struct e1000_phy_info *phy = &hw->phy; | |
950 | s32 ret_val; | |
951 | u16 phy_data; | |
952 | bool link; | |
953 | ||
954 | /* Clear Auto-Crossover to force MDI manually. M88E1000 requires MDI | |
955 | * forced whenever speed and duplex are forced. | |
956 | */ | |
957 | ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); | |
958 | if (ret_val) | |
959 | return ret_val; | |
960 | ||
961 | phy_data &= ~M88E1000_PSCR_AUTO_X_MODE; | |
962 | ret_val = e1e_wphy(hw, M88E1000_PHY_SPEC_CTRL, phy_data); | |
963 | if (ret_val) | |
964 | return ret_val; | |
965 | ||
966 | hw_dbg(hw, "M88E1000 PSCR: %X\n", phy_data); | |
967 | ||
968 | ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_data); | |
969 | if (ret_val) | |
970 | return ret_val; | |
971 | ||
972 | e1000e_phy_force_speed_duplex_setup(hw, &phy_data); | |
973 | ||
974 | /* Reset the phy to commit changes. */ | |
975 | phy_data |= MII_CR_RESET; | |
976 | ||
977 | ret_val = e1e_wphy(hw, PHY_CONTROL, phy_data); | |
978 | if (ret_val) | |
979 | return ret_val; | |
980 | ||
981 | udelay(1); | |
982 | ||
983 | if (phy->wait_for_link) { | |
984 | hw_dbg(hw, "Waiting for forced speed/duplex link on M88 phy.\n"); | |
985 | ||
986 | ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT, | |
987 | 100000, &link); | |
988 | if (ret_val) | |
989 | return ret_val; | |
990 | ||
991 | if (!link) { | |
992 | /* We didn't get link. | |
993 | * Reset the DSP and cross our fingers. | |
994 | */ | |
995 | ret_val = e1e_wphy(hw, M88E1000_PHY_PAGE_SELECT, 0x001d); | |
996 | if (ret_val) | |
997 | return ret_val; | |
998 | ret_val = e1000e_phy_reset_dsp(hw); | |
999 | if (ret_val) | |
1000 | return ret_val; | |
1001 | } | |
1002 | ||
1003 | /* Try once more */ | |
1004 | ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT, | |
1005 | 100000, &link); | |
1006 | if (ret_val) | |
1007 | return ret_val; | |
1008 | } | |
1009 | ||
1010 | ret_val = e1e_rphy(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data); | |
1011 | if (ret_val) | |
1012 | return ret_val; | |
1013 | ||
1014 | /* Resetting the phy means we need to re-force TX_CLK in the | |
1015 | * Extended PHY Specific Control Register to 25MHz clock from | |
1016 | * the reset value of 2.5MHz. | |
1017 | */ | |
1018 | phy_data |= M88E1000_EPSCR_TX_CLK_25; | |
1019 | ret_val = e1e_wphy(hw, M88E1000_EXT_PHY_SPEC_CTRL, phy_data); | |
1020 | if (ret_val) | |
1021 | return ret_val; | |
1022 | ||
1023 | /* In addition, we must re-enable CRS on Tx for both half and full | |
1024 | * duplex. | |
1025 | */ | |
1026 | ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); | |
1027 | if (ret_val) | |
1028 | return ret_val; | |
1029 | ||
1030 | phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX; | |
1031 | ret_val = e1e_wphy(hw, M88E1000_PHY_SPEC_CTRL, phy_data); | |
1032 | ||
1033 | return ret_val; | |
1034 | } | |
1035 | ||
1036 | /** | |
1037 | * e1000e_phy_force_speed_duplex_setup - Configure forced PHY speed/duplex | |
1038 | * @hw: pointer to the HW structure | |
1039 | * @phy_ctrl: pointer to current value of PHY_CONTROL | |
1040 | * | |
1041 | * Forces speed and duplex on the PHY by doing the following: disable flow | |
1042 | * control, force speed/duplex on the MAC, disable auto speed detection, | |
1043 | * disable auto-negotiation, configure duplex, configure speed, configure | |
1044 | * the collision distance, write configuration to CTRL register. The | |
1045 | * caller must write to the PHY_CONTROL register for these settings to | |
1046 | * take affect. | |
1047 | **/ | |
1048 | void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl) | |
1049 | { | |
1050 | struct e1000_mac_info *mac = &hw->mac; | |
1051 | u32 ctrl; | |
1052 | ||
1053 | /* Turn off flow control when forcing speed/duplex */ | |
1054 | mac->fc = e1000_fc_none; | |
1055 | ||
1056 | /* Force speed/duplex on the mac */ | |
1057 | ctrl = er32(CTRL); | |
1058 | ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX); | |
1059 | ctrl &= ~E1000_CTRL_SPD_SEL; | |
1060 | ||
1061 | /* Disable Auto Speed Detection */ | |
1062 | ctrl &= ~E1000_CTRL_ASDE; | |
1063 | ||
1064 | /* Disable autoneg on the phy */ | |
1065 | *phy_ctrl &= ~MII_CR_AUTO_NEG_EN; | |
1066 | ||
1067 | /* Forcing Full or Half Duplex? */ | |
1068 | if (mac->forced_speed_duplex & E1000_ALL_HALF_DUPLEX) { | |
1069 | ctrl &= ~E1000_CTRL_FD; | |
1070 | *phy_ctrl &= ~MII_CR_FULL_DUPLEX; | |
1071 | hw_dbg(hw, "Half Duplex\n"); | |
1072 | } else { | |
1073 | ctrl |= E1000_CTRL_FD; | |
1074 | *phy_ctrl |= MII_CR_FULL_DUPLEX; | |
1075 | hw_dbg(hw, "Full Duplex\n"); | |
1076 | } | |
1077 | ||
1078 | /* Forcing 10mb or 100mb? */ | |
1079 | if (mac->forced_speed_duplex & E1000_ALL_100_SPEED) { | |
1080 | ctrl |= E1000_CTRL_SPD_100; | |
1081 | *phy_ctrl |= MII_CR_SPEED_100; | |
1082 | *phy_ctrl &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_10); | |
1083 | hw_dbg(hw, "Forcing 100mb\n"); | |
1084 | } else { | |
1085 | ctrl &= ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100); | |
1086 | *phy_ctrl |= MII_CR_SPEED_10; | |
1087 | *phy_ctrl &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_100); | |
1088 | hw_dbg(hw, "Forcing 10mb\n"); | |
1089 | } | |
1090 | ||
1091 | e1000e_config_collision_dist(hw); | |
1092 | ||
1093 | ew32(CTRL, ctrl); | |
1094 | } | |
1095 | ||
1096 | /** | |
1097 | * e1000e_set_d3_lplu_state - Sets low power link up state for D3 | |
1098 | * @hw: pointer to the HW structure | |
1099 | * @active: boolean used to enable/disable lplu | |
1100 | * | |
1101 | * Success returns 0, Failure returns 1 | |
1102 | * | |
1103 | * The low power link up (lplu) state is set to the power management level D3 | |
1104 | * and SmartSpeed is disabled when active is true, else clear lplu for D3 | |
1105 | * and enable Smartspeed. LPLU and Smartspeed are mutually exclusive. LPLU | |
1106 | * is used during Dx states where the power conservation is most important. | |
1107 | * During driver activity, SmartSpeed should be enabled so performance is | |
1108 | * maintained. | |
1109 | **/ | |
1110 | s32 e1000e_set_d3_lplu_state(struct e1000_hw *hw, bool active) | |
1111 | { | |
1112 | struct e1000_phy_info *phy = &hw->phy; | |
1113 | s32 ret_val; | |
1114 | u16 data; | |
1115 | ||
1116 | ret_val = e1e_rphy(hw, IGP02E1000_PHY_POWER_MGMT, &data); | |
1117 | if (ret_val) | |
1118 | return ret_val; | |
1119 | ||
1120 | if (!active) { | |
1121 | data &= ~IGP02E1000_PM_D3_LPLU; | |
1122 | ret_val = e1e_wphy(hw, | |
1123 | IGP02E1000_PHY_POWER_MGMT, | |
1124 | data); | |
1125 | if (ret_val) | |
1126 | return ret_val; | |
1127 | /* LPLU and SmartSpeed are mutually exclusive. LPLU is used | |
1128 | * during Dx states where the power conservation is most | |
1129 | * important. During driver activity we should enable | |
1130 | * SmartSpeed, so performance is maintained. */ | |
1131 | if (phy->smart_speed == e1000_smart_speed_on) { | |
1132 | ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG, | |
1133 | &data); | |
1134 | if (ret_val) | |
1135 | return ret_val; | |
1136 | ||
1137 | data |= IGP01E1000_PSCFR_SMART_SPEED; | |
1138 | ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG, | |
1139 | data); | |
1140 | if (ret_val) | |
1141 | return ret_val; | |
1142 | } else if (phy->smart_speed == e1000_smart_speed_off) { | |
1143 | ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG, | |
1144 | &data); | |
1145 | if (ret_val) | |
1146 | return ret_val; | |
1147 | ||
1148 | data &= ~IGP01E1000_PSCFR_SMART_SPEED; | |
1149 | ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG, | |
1150 | data); | |
1151 | if (ret_val) | |
1152 | return ret_val; | |
1153 | } | |
1154 | } else if ((phy->autoneg_advertised == E1000_ALL_SPEED_DUPLEX) || | |
1155 | (phy->autoneg_advertised == E1000_ALL_NOT_GIG) || | |
1156 | (phy->autoneg_advertised == E1000_ALL_10_SPEED)) { | |
1157 | data |= IGP02E1000_PM_D3_LPLU; | |
1158 | ret_val = e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, data); | |
1159 | if (ret_val) | |
1160 | return ret_val; | |
1161 | ||
1162 | /* When LPLU is enabled, we should disable SmartSpeed */ | |
1163 | ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG, &data); | |
1164 | if (ret_val) | |
1165 | return ret_val; | |
1166 | ||
1167 | data &= ~IGP01E1000_PSCFR_SMART_SPEED; | |
1168 | ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG, data); | |
1169 | } | |
1170 | ||
1171 | return ret_val; | |
1172 | } | |
1173 | ||
1174 | /** | |
1175 | * e1000e_check_downshift - Checks whether a downshift in speed occured | |
1176 | * @hw: pointer to the HW structure | |
1177 | * | |
1178 | * Success returns 0, Failure returns 1 | |
1179 | * | |
1180 | * A downshift is detected by querying the PHY link health. | |
1181 | **/ | |
1182 | s32 e1000e_check_downshift(struct e1000_hw *hw) | |
1183 | { | |
1184 | struct e1000_phy_info *phy = &hw->phy; | |
1185 | s32 ret_val; | |
1186 | u16 phy_data, offset, mask; | |
1187 | ||
1188 | switch (phy->type) { | |
1189 | case e1000_phy_m88: | |
1190 | case e1000_phy_gg82563: | |
1191 | offset = M88E1000_PHY_SPEC_STATUS; | |
1192 | mask = M88E1000_PSSR_DOWNSHIFT; | |
1193 | break; | |
1194 | case e1000_phy_igp_2: | |
1195 | case e1000_phy_igp_3: | |
1196 | offset = IGP01E1000_PHY_LINK_HEALTH; | |
1197 | mask = IGP01E1000_PLHR_SS_DOWNGRADE; | |
1198 | break; | |
1199 | default: | |
1200 | /* speed downshift not supported */ | |
1201 | phy->speed_downgraded = 0; | |
1202 | return 0; | |
1203 | } | |
1204 | ||
1205 | ret_val = e1e_rphy(hw, offset, &phy_data); | |
1206 | ||
1207 | if (!ret_val) | |
1208 | phy->speed_downgraded = (phy_data & mask); | |
1209 | ||
1210 | return ret_val; | |
1211 | } | |
1212 | ||
1213 | /** | |
1214 | * e1000_check_polarity_m88 - Checks the polarity. | |
1215 | * @hw: pointer to the HW structure | |
1216 | * | |
1217 | * Success returns 0, Failure returns -E1000_ERR_PHY (-2) | |
1218 | * | |
1219 | * Polarity is determined based on the PHY specific status register. | |
1220 | **/ | |
1221 | static s32 e1000_check_polarity_m88(struct e1000_hw *hw) | |
1222 | { | |
1223 | struct e1000_phy_info *phy = &hw->phy; | |
1224 | s32 ret_val; | |
1225 | u16 data; | |
1226 | ||
1227 | ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_STATUS, &data); | |
1228 | ||
1229 | if (!ret_val) | |
1230 | phy->cable_polarity = (data & M88E1000_PSSR_REV_POLARITY) | |
1231 | ? e1000_rev_polarity_reversed | |
1232 | : e1000_rev_polarity_normal; | |
1233 | ||
1234 | return ret_val; | |
1235 | } | |
1236 | ||
1237 | /** | |
1238 | * e1000_check_polarity_igp - Checks the polarity. | |
1239 | * @hw: pointer to the HW structure | |
1240 | * | |
1241 | * Success returns 0, Failure returns -E1000_ERR_PHY (-2) | |
1242 | * | |
1243 | * Polarity is determined based on the PHY port status register, and the | |
1244 | * current speed (since there is no polarity at 100Mbps). | |
1245 | **/ | |
1246 | static s32 e1000_check_polarity_igp(struct e1000_hw *hw) | |
1247 | { | |
1248 | struct e1000_phy_info *phy = &hw->phy; | |
1249 | s32 ret_val; | |
1250 | u16 data, offset, mask; | |
1251 | ||
1252 | /* Polarity is determined based on the speed of | |
1253 | * our connection. */ | |
1254 | ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_STATUS, &data); | |
1255 | if (ret_val) | |
1256 | return ret_val; | |
1257 | ||
1258 | if ((data & IGP01E1000_PSSR_SPEED_MASK) == | |
1259 | IGP01E1000_PSSR_SPEED_1000MBPS) { | |
1260 | offset = IGP01E1000_PHY_PCS_INIT_REG; | |
1261 | mask = IGP01E1000_PHY_POLARITY_MASK; | |
1262 | } else { | |
1263 | /* This really only applies to 10Mbps since | |
1264 | * there is no polarity for 100Mbps (always 0). | |
1265 | */ | |
1266 | offset = IGP01E1000_PHY_PORT_STATUS; | |
1267 | mask = IGP01E1000_PSSR_POLARITY_REVERSED; | |
1268 | } | |
1269 | ||
1270 | ret_val = e1e_rphy(hw, offset, &data); | |
1271 | ||
1272 | if (!ret_val) | |
1273 | phy->cable_polarity = (data & mask) | |
1274 | ? e1000_rev_polarity_reversed | |
1275 | : e1000_rev_polarity_normal; | |
1276 | ||
1277 | return ret_val; | |
1278 | } | |
1279 | ||
1280 | /** | |
1281 | * e1000_wait_autoneg - Wait for auto-neg compeletion | |
1282 | * @hw: pointer to the HW structure | |
1283 | * | |
1284 | * Waits for auto-negotiation to complete or for the auto-negotiation time | |
1285 | * limit to expire, which ever happens first. | |
1286 | **/ | |
1287 | static s32 e1000_wait_autoneg(struct e1000_hw *hw) | |
1288 | { | |
1289 | s32 ret_val = 0; | |
1290 | u16 i, phy_status; | |
1291 | ||
1292 | /* Break after autoneg completes or PHY_AUTO_NEG_LIMIT expires. */ | |
1293 | for (i = PHY_AUTO_NEG_LIMIT; i > 0; i--) { | |
1294 | ret_val = e1e_rphy(hw, PHY_STATUS, &phy_status); | |
1295 | if (ret_val) | |
1296 | break; | |
1297 | ret_val = e1e_rphy(hw, PHY_STATUS, &phy_status); | |
1298 | if (ret_val) | |
1299 | break; | |
1300 | if (phy_status & MII_SR_AUTONEG_COMPLETE) | |
1301 | break; | |
1302 | msleep(100); | |
1303 | } | |
1304 | ||
1305 | /* PHY_AUTO_NEG_TIME expiration doesn't guarantee auto-negotiation | |
1306 | * has completed. | |
1307 | */ | |
1308 | return ret_val; | |
1309 | } | |
1310 | ||
1311 | /** | |
1312 | * e1000e_phy_has_link_generic - Polls PHY for link | |
1313 | * @hw: pointer to the HW structure | |
1314 | * @iterations: number of times to poll for link | |
1315 | * @usec_interval: delay between polling attempts | |
1316 | * @success: pointer to whether polling was successful or not | |
1317 | * | |
1318 | * Polls the PHY status register for link, 'iterations' number of times. | |
1319 | **/ | |
1320 | s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations, | |
1321 | u32 usec_interval, bool *success) | |
1322 | { | |
1323 | s32 ret_val = 0; | |
1324 | u16 i, phy_status; | |
1325 | ||
1326 | for (i = 0; i < iterations; i++) { | |
1327 | /* Some PHYs require the PHY_STATUS register to be read | |
1328 | * twice due to the link bit being sticky. No harm doing | |
1329 | * it across the board. | |
1330 | */ | |
1331 | ret_val = e1e_rphy(hw, PHY_STATUS, &phy_status); | |
1332 | if (ret_val) | |
1333 | break; | |
1334 | ret_val = e1e_rphy(hw, PHY_STATUS, &phy_status); | |
1335 | if (ret_val) | |
1336 | break; | |
1337 | if (phy_status & MII_SR_LINK_STATUS) | |
1338 | break; | |
1339 | if (usec_interval >= 1000) | |
1340 | mdelay(usec_interval/1000); | |
1341 | else | |
1342 | udelay(usec_interval); | |
1343 | } | |
1344 | ||
1345 | *success = (i < iterations); | |
1346 | ||
1347 | return ret_val; | |
1348 | } | |
1349 | ||
1350 | /** | |
1351 | * e1000e_get_cable_length_m88 - Determine cable length for m88 PHY | |
1352 | * @hw: pointer to the HW structure | |
1353 | * | |
1354 | * Reads the PHY specific status register to retrieve the cable length | |
1355 | * information. The cable length is determined by averaging the minimum and | |
1356 | * maximum values to get the "average" cable length. The m88 PHY has four | |
1357 | * possible cable length values, which are: | |
1358 | * Register Value Cable Length | |
1359 | * 0 < 50 meters | |
1360 | * 1 50 - 80 meters | |
1361 | * 2 80 - 110 meters | |
1362 | * 3 110 - 140 meters | |
1363 | * 4 > 140 meters | |
1364 | **/ | |
1365 | s32 e1000e_get_cable_length_m88(struct e1000_hw *hw) | |
1366 | { | |
1367 | struct e1000_phy_info *phy = &hw->phy; | |
1368 | s32 ret_val; | |
1369 | u16 phy_data, index; | |
1370 | ||
1371 | ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_STATUS, &phy_data); | |
1372 | if (ret_val) | |
1373 | return ret_val; | |
1374 | ||
1375 | index = (phy_data & M88E1000_PSSR_CABLE_LENGTH) >> | |
1376 | M88E1000_PSSR_CABLE_LENGTH_SHIFT; | |
1377 | phy->min_cable_length = e1000_m88_cable_length_table[index]; | |
1378 | phy->max_cable_length = e1000_m88_cable_length_table[index+1]; | |
1379 | ||
1380 | phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2; | |
1381 | ||
1382 | return ret_val; | |
1383 | } | |
1384 | ||
1385 | /** | |
1386 | * e1000e_get_cable_length_igp_2 - Determine cable length for igp2 PHY | |
1387 | * @hw: pointer to the HW structure | |
1388 | * | |
1389 | * The automatic gain control (agc) normalizes the amplitude of the | |
1390 | * received signal, adjusting for the attenuation produced by the | |
1391 | * cable. By reading the AGC registers, which reperesent the | |
1392 | * cobination of course and fine gain value, the value can be put | |
1393 | * into a lookup table to obtain the approximate cable length | |
1394 | * for each channel. | |
1395 | **/ | |
1396 | s32 e1000e_get_cable_length_igp_2(struct e1000_hw *hw) | |
1397 | { | |
1398 | struct e1000_phy_info *phy = &hw->phy; | |
1399 | s32 ret_val; | |
1400 | u16 phy_data, i, agc_value = 0; | |
1401 | u16 cur_agc_index, max_agc_index = 0; | |
1402 | u16 min_agc_index = IGP02E1000_CABLE_LENGTH_TABLE_SIZE - 1; | |
1403 | u16 agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] = | |
1404 | {IGP02E1000_PHY_AGC_A, | |
1405 | IGP02E1000_PHY_AGC_B, | |
1406 | IGP02E1000_PHY_AGC_C, | |
1407 | IGP02E1000_PHY_AGC_D}; | |
1408 | ||
1409 | /* Read the AGC registers for all channels */ | |
1410 | for (i = 0; i < IGP02E1000_PHY_CHANNEL_NUM; i++) { | |
1411 | ret_val = e1e_rphy(hw, agc_reg_array[i], &phy_data); | |
1412 | if (ret_val) | |
1413 | return ret_val; | |
1414 | ||
1415 | /* Getting bits 15:9, which represent the combination of | |
1416 | * course and fine gain values. The result is a number | |
1417 | * that can be put into the lookup table to obtain the | |
1418 | * approximate cable length. */ | |
1419 | cur_agc_index = (phy_data >> IGP02E1000_AGC_LENGTH_SHIFT) & | |
1420 | IGP02E1000_AGC_LENGTH_MASK; | |
1421 | ||
1422 | /* Array index bound check. */ | |
1423 | if ((cur_agc_index >= IGP02E1000_CABLE_LENGTH_TABLE_SIZE) || | |
1424 | (cur_agc_index == 0)) | |
1425 | return -E1000_ERR_PHY; | |
1426 | ||
1427 | /* Remove min & max AGC values from calculation. */ | |
1428 | if (e1000_igp_2_cable_length_table[min_agc_index] > | |
1429 | e1000_igp_2_cable_length_table[cur_agc_index]) | |
1430 | min_agc_index = cur_agc_index; | |
1431 | if (e1000_igp_2_cable_length_table[max_agc_index] < | |
1432 | e1000_igp_2_cable_length_table[cur_agc_index]) | |
1433 | max_agc_index = cur_agc_index; | |
1434 | ||
1435 | agc_value += e1000_igp_2_cable_length_table[cur_agc_index]; | |
1436 | } | |
1437 | ||
1438 | agc_value -= (e1000_igp_2_cable_length_table[min_agc_index] + | |
1439 | e1000_igp_2_cable_length_table[max_agc_index]); | |
1440 | agc_value /= (IGP02E1000_PHY_CHANNEL_NUM - 2); | |
1441 | ||
1442 | /* Calculate cable length with the error range of +/- 10 meters. */ | |
1443 | phy->min_cable_length = ((agc_value - IGP02E1000_AGC_RANGE) > 0) ? | |
1444 | (agc_value - IGP02E1000_AGC_RANGE) : 0; | |
1445 | phy->max_cable_length = agc_value + IGP02E1000_AGC_RANGE; | |
1446 | ||
1447 | phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2; | |
1448 | ||
1449 | return ret_val; | |
1450 | } | |
1451 | ||
1452 | /** | |
1453 | * e1000e_get_phy_info_m88 - Retrieve PHY information | |
1454 | * @hw: pointer to the HW structure | |
1455 | * | |
1456 | * Valid for only copper links. Read the PHY status register (sticky read) | |
1457 | * to verify that link is up. Read the PHY special control register to | |
1458 | * determine the polarity and 10base-T extended distance. Read the PHY | |
1459 | * special status register to determine MDI/MDIx and current speed. If | |
1460 | * speed is 1000, then determine cable length, local and remote receiver. | |
1461 | **/ | |
1462 | s32 e1000e_get_phy_info_m88(struct e1000_hw *hw) | |
1463 | { | |
1464 | struct e1000_phy_info *phy = &hw->phy; | |
1465 | s32 ret_val; | |
1466 | u16 phy_data; | |
1467 | bool link; | |
1468 | ||
1469 | if (hw->media_type != e1000_media_type_copper) { | |
1470 | hw_dbg(hw, "Phy info is only valid for copper media\n"); | |
1471 | return -E1000_ERR_CONFIG; | |
1472 | } | |
1473 | ||
1474 | ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link); | |
1475 | if (ret_val) | |
1476 | return ret_val; | |
1477 | ||
1478 | if (!link) { | |
1479 | hw_dbg(hw, "Phy info is only valid if link is up\n"); | |
1480 | return -E1000_ERR_CONFIG; | |
1481 | } | |
1482 | ||
1483 | ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); | |
1484 | if (ret_val) | |
1485 | return ret_val; | |
1486 | ||
1487 | phy->polarity_correction = (phy_data & | |
1488 | M88E1000_PSCR_POLARITY_REVERSAL); | |
1489 | ||
1490 | ret_val = e1000_check_polarity_m88(hw); | |
1491 | if (ret_val) | |
1492 | return ret_val; | |
1493 | ||
1494 | ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_STATUS, &phy_data); | |
1495 | if (ret_val) | |
1496 | return ret_val; | |
1497 | ||
1498 | phy->is_mdix = (phy_data & M88E1000_PSSR_MDIX); | |
1499 | ||
1500 | if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS) { | |
1501 | ret_val = e1000_get_cable_length(hw); | |
1502 | if (ret_val) | |
1503 | return ret_val; | |
1504 | ||
1505 | ret_val = e1e_rphy(hw, PHY_1000T_STATUS, &phy_data); | |
1506 | if (ret_val) | |
1507 | return ret_val; | |
1508 | ||
1509 | phy->local_rx = (phy_data & SR_1000T_LOCAL_RX_STATUS) | |
1510 | ? e1000_1000t_rx_status_ok | |
1511 | : e1000_1000t_rx_status_not_ok; | |
1512 | ||
1513 | phy->remote_rx = (phy_data & SR_1000T_REMOTE_RX_STATUS) | |
1514 | ? e1000_1000t_rx_status_ok | |
1515 | : e1000_1000t_rx_status_not_ok; | |
1516 | } else { | |
1517 | /* Set values to "undefined" */ | |
1518 | phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED; | |
1519 | phy->local_rx = e1000_1000t_rx_status_undefined; | |
1520 | phy->remote_rx = e1000_1000t_rx_status_undefined; | |
1521 | } | |
1522 | ||
1523 | return ret_val; | |
1524 | } | |
1525 | ||
1526 | /** | |
1527 | * e1000e_get_phy_info_igp - Retrieve igp PHY information | |
1528 | * @hw: pointer to the HW structure | |
1529 | * | |
1530 | * Read PHY status to determine if link is up. If link is up, then | |
1531 | * set/determine 10base-T extended distance and polarity correction. Read | |
1532 | * PHY port status to determine MDI/MDIx and speed. Based on the speed, | |
1533 | * determine on the cable length, local and remote receiver. | |
1534 | **/ | |
1535 | s32 e1000e_get_phy_info_igp(struct e1000_hw *hw) | |
1536 | { | |
1537 | struct e1000_phy_info *phy = &hw->phy; | |
1538 | s32 ret_val; | |
1539 | u16 data; | |
1540 | bool link; | |
1541 | ||
1542 | ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link); | |
1543 | if (ret_val) | |
1544 | return ret_val; | |
1545 | ||
1546 | if (!link) { | |
1547 | hw_dbg(hw, "Phy info is only valid if link is up\n"); | |
1548 | return -E1000_ERR_CONFIG; | |
1549 | } | |
1550 | ||
1551 | phy->polarity_correction = 1; | |
1552 | ||
1553 | ret_val = e1000_check_polarity_igp(hw); | |
1554 | if (ret_val) | |
1555 | return ret_val; | |
1556 | ||
1557 | ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_STATUS, &data); | |
1558 | if (ret_val) | |
1559 | return ret_val; | |
1560 | ||
1561 | phy->is_mdix = (data & IGP01E1000_PSSR_MDIX); | |
1562 | ||
1563 | if ((data & IGP01E1000_PSSR_SPEED_MASK) == | |
1564 | IGP01E1000_PSSR_SPEED_1000MBPS) { | |
1565 | ret_val = e1000_get_cable_length(hw); | |
1566 | if (ret_val) | |
1567 | return ret_val; | |
1568 | ||
1569 | ret_val = e1e_rphy(hw, PHY_1000T_STATUS, &data); | |
1570 | if (ret_val) | |
1571 | return ret_val; | |
1572 | ||
1573 | phy->local_rx = (data & SR_1000T_LOCAL_RX_STATUS) | |
1574 | ? e1000_1000t_rx_status_ok | |
1575 | : e1000_1000t_rx_status_not_ok; | |
1576 | ||
1577 | phy->remote_rx = (data & SR_1000T_REMOTE_RX_STATUS) | |
1578 | ? e1000_1000t_rx_status_ok | |
1579 | : e1000_1000t_rx_status_not_ok; | |
1580 | } else { | |
1581 | phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED; | |
1582 | phy->local_rx = e1000_1000t_rx_status_undefined; | |
1583 | phy->remote_rx = e1000_1000t_rx_status_undefined; | |
1584 | } | |
1585 | ||
1586 | return ret_val; | |
1587 | } | |
1588 | ||
1589 | /** | |
1590 | * e1000e_phy_sw_reset - PHY software reset | |
1591 | * @hw: pointer to the HW structure | |
1592 | * | |
1593 | * Does a software reset of the PHY by reading the PHY control register and | |
1594 | * setting/write the control register reset bit to the PHY. | |
1595 | **/ | |
1596 | s32 e1000e_phy_sw_reset(struct e1000_hw *hw) | |
1597 | { | |
1598 | s32 ret_val; | |
1599 | u16 phy_ctrl; | |
1600 | ||
1601 | ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_ctrl); | |
1602 | if (ret_val) | |
1603 | return ret_val; | |
1604 | ||
1605 | phy_ctrl |= MII_CR_RESET; | |
1606 | ret_val = e1e_wphy(hw, PHY_CONTROL, phy_ctrl); | |
1607 | if (ret_val) | |
1608 | return ret_val; | |
1609 | ||
1610 | udelay(1); | |
1611 | ||
1612 | return ret_val; | |
1613 | } | |
1614 | ||
1615 | /** | |
1616 | * e1000e_phy_hw_reset_generic - PHY hardware reset | |
1617 | * @hw: pointer to the HW structure | |
1618 | * | |
1619 | * Verify the reset block is not blocking us from resetting. Acquire | |
1620 | * semaphore (if necessary) and read/set/write the device control reset | |
1621 | * bit in the PHY. Wait the appropriate delay time for the device to | |
1622 | * reset and relase the semaphore (if necessary). | |
1623 | **/ | |
1624 | s32 e1000e_phy_hw_reset_generic(struct e1000_hw *hw) | |
1625 | { | |
1626 | struct e1000_phy_info *phy = &hw->phy; | |
1627 | s32 ret_val; | |
1628 | u32 ctrl; | |
1629 | ||
1630 | ret_val = e1000_check_reset_block(hw); | |
1631 | if (ret_val) | |
1632 | return 0; | |
1633 | ||
1634 | ret_val = phy->ops.acquire_phy(hw); | |
1635 | if (ret_val) | |
1636 | return ret_val; | |
1637 | ||
1638 | ctrl = er32(CTRL); | |
1639 | ew32(CTRL, ctrl | E1000_CTRL_PHY_RST); | |
1640 | e1e_flush(); | |
1641 | ||
1642 | udelay(phy->reset_delay_us); | |
1643 | ||
1644 | ew32(CTRL, ctrl); | |
1645 | e1e_flush(); | |
1646 | ||
1647 | udelay(150); | |
1648 | ||
1649 | phy->ops.release_phy(hw); | |
1650 | ||
1651 | return e1000_get_phy_cfg_done(hw); | |
1652 | } | |
1653 | ||
1654 | /** | |
1655 | * e1000e_get_cfg_done - Generic configuration done | |
1656 | * @hw: pointer to the HW structure | |
1657 | * | |
1658 | * Generic function to wait 10 milli-seconds for configuration to complete | |
1659 | * and return success. | |
1660 | **/ | |
1661 | s32 e1000e_get_cfg_done(struct e1000_hw *hw) | |
1662 | { | |
1663 | mdelay(10); | |
1664 | return 0; | |
1665 | } | |
1666 | ||
1667 | /* Internal function pointers */ | |
1668 | ||
1669 | /** | |
1670 | * e1000_get_phy_cfg_done - Generic PHY configuration done | |
1671 | * @hw: pointer to the HW structure | |
1672 | * | |
1673 | * Return success if silicon family did not implement a family specific | |
1674 | * get_cfg_done function. | |
1675 | **/ | |
1676 | static s32 e1000_get_phy_cfg_done(struct e1000_hw *hw) | |
1677 | { | |
1678 | if (hw->phy.ops.get_cfg_done) | |
1679 | return hw->phy.ops.get_cfg_done(hw); | |
1680 | ||
1681 | return 0; | |
1682 | } | |
1683 | ||
1684 | /** | |
1685 | * e1000_phy_force_speed_duplex - Generic force PHY speed/duplex | |
1686 | * @hw: pointer to the HW structure | |
1687 | * | |
1688 | * When the silicon family has not implemented a forced speed/duplex | |
1689 | * function for the PHY, simply return 0. | |
1690 | **/ | |
1691 | static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw) | |
1692 | { | |
1693 | if (hw->phy.ops.force_speed_duplex) | |
1694 | return hw->phy.ops.force_speed_duplex(hw); | |
1695 | ||
1696 | return 0; | |
1697 | } | |
1698 | ||
1699 | /** | |
1700 | * e1000e_get_phy_type_from_id - Get PHY type from id | |
1701 | * @phy_id: phy_id read from the phy | |
1702 | * | |
1703 | * Returns the phy type from the id. | |
1704 | **/ | |
1705 | enum e1000_phy_type e1000e_get_phy_type_from_id(u32 phy_id) | |
1706 | { | |
1707 | enum e1000_phy_type phy_type = e1000_phy_unknown; | |
1708 | ||
1709 | switch (phy_id) { | |
1710 | case M88E1000_I_PHY_ID: | |
1711 | case M88E1000_E_PHY_ID: | |
1712 | case M88E1111_I_PHY_ID: | |
1713 | case M88E1011_I_PHY_ID: | |
1714 | phy_type = e1000_phy_m88; | |
1715 | break; | |
1716 | case IGP01E1000_I_PHY_ID: /* IGP 1 & 2 share this */ | |
1717 | phy_type = e1000_phy_igp_2; | |
1718 | break; | |
1719 | case GG82563_E_PHY_ID: | |
1720 | phy_type = e1000_phy_gg82563; | |
1721 | break; | |
1722 | case IGP03E1000_E_PHY_ID: | |
1723 | phy_type = e1000_phy_igp_3; | |
1724 | break; | |
1725 | case IFE_E_PHY_ID: | |
1726 | case IFE_PLUS_E_PHY_ID: | |
1727 | case IFE_C_E_PHY_ID: | |
1728 | phy_type = e1000_phy_ife; | |
1729 | break; | |
1730 | default: | |
1731 | phy_type = e1000_phy_unknown; | |
1732 | break; | |
1733 | } | |
1734 | return phy_type; | |
1735 | } | |
1736 | ||
1737 | /** | |
1738 | * e1000e_commit_phy - Soft PHY reset | |
1739 | * @hw: pointer to the HW structure | |
1740 | * | |
1741 | * Performs a soft PHY reset on those that apply. This is a function pointer | |
1742 | * entry point called by drivers. | |
1743 | **/ | |
1744 | s32 e1000e_commit_phy(struct e1000_hw *hw) | |
1745 | { | |
1746 | if (hw->phy.ops.commit_phy) | |
1747 | return hw->phy.ops.commit_phy(hw); | |
1748 | ||
1749 | return 0; | |
1750 | } | |
1751 | ||
1752 | /** | |
1753 | * e1000_set_d0_lplu_state - Sets low power link up state for D0 | |
1754 | * @hw: pointer to the HW structure | |
1755 | * @active: boolean used to enable/disable lplu | |
1756 | * | |
1757 | * Success returns 0, Failure returns 1 | |
1758 | * | |
1759 | * The low power link up (lplu) state is set to the power management level D0 | |
1760 | * and SmartSpeed is disabled when active is true, else clear lplu for D0 | |
1761 | * and enable Smartspeed. LPLU and Smartspeed are mutually exclusive. LPLU | |
1762 | * is used during Dx states where the power conservation is most important. | |
1763 | * During driver activity, SmartSpeed should be enabled so performance is | |
1764 | * maintained. This is a function pointer entry point called by drivers. | |
1765 | **/ | |
1766 | static s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active) | |
1767 | { | |
1768 | if (hw->phy.ops.set_d0_lplu_state) | |
1769 | return hw->phy.ops.set_d0_lplu_state(hw, active); | |
1770 | ||
1771 | return 0; | |
1772 | } |