projects / deliverable / linux.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
ehea: removing unused functionality
[deliverable/linux.git] / drivers / net / eexpress.c
CommitLineData
1da177e4
LT		 1/* Intel EtherExpress 16 device driver for Linux
2 *
3 * Written by John Sullivan, 1995
4 * based on original code by Donald Becker, with changes by
5 * Alan Cox and Pauline Middelink.
6 *
7 * Support for 8-bit mode by Zoltan Szilagyi <zoltans@cs.arizona.edu>
8 *
9 * Many modifications, and currently maintained, by
10 * Philip Blundell <philb@gnu.org>
11 * Added the Compaq LTE Alan Cox <alan@redhat.com>
12 * Added MCA support Adam Fritzler <mid@auk.cx>
13 *
14 * Note - this driver is experimental still - it has problems on faster
15 * machines. Someone needs to sit down and go through it line by line with
16 * a databook...
17 */
18
19/* The EtherExpress 16 is a fairly simple card, based on a shared-memory
20 * design using the i82586 Ethernet coprocessor. It bears no relationship,
21 * as far as I know, to the similarly-named "EtherExpress Pro" range.
22 *
23 * Historically, Linux support for these cards has been very bad. However,
24 * things seem to be getting better slowly.
25 */
26
27/* If your card is confused about what sort of interface it has (eg it
28 * persistently reports "10baseT" when none is fitted), running 'SOFTSET /BART'
29 * or 'SOFTSET /LISA' from DOS seems to help.
30 */
31
32/* Here's the scoop on memory mapping.
33 *
34 * There are three ways to access EtherExpress card memory: either using the
35 * shared-memory mapping, or using PIO through the dataport, or using PIO
36 * through the "shadow memory" ports.
37 *
38 * The shadow memory system works by having the card map some of its memory
39 * as follows:
40 *
41 * (the low five bits of the SMPTR are ignored)
42 *
43 * base+0x4000..400f memory at SMPTR+0..15
44 * base+0x8000..800f memory at SMPTR+16..31
45 * base+0xc000..c007 dubious stuff (memory at SMPTR+16..23 apparently)
46 * base+0xc008..c00f memory at 0x0008..0x000f
47 *
48 * This last set (the one at c008) is particularly handy because the SCB
49 * lives at 0x0008. So that set of ports gives us easy random access to data
50 * in the SCB without having to mess around setting up pointers and the like.
51 * We always use this method to access the SCB (via the scb_xx() functions).
52 *
53 * Dataport access works by aiming the appropriate (read or write) pointer
54 * at the first address you're interested in, and then reading or writing from
55 * the dataport. The pointers auto-increment after each transfer. We use
56 * this for data transfer.
57 *
58 * We don't use the shared-memory system because it allegedly doesn't work on
59 * all cards, and because it's a bit more prone to go wrong (it's one more
60 * thing to configure...).
61 */
62
63/* Known bugs:
64 *
65 * - The card seems to want to give us two interrupts every time something
66 * happens, where just one would be better.
67 */
68
69/*
70 *
71 * Note by Zoltan Szilagyi 10-12-96:
72 *
73 * I've succeeded in eliminating the "CU wedged" messages, and hence the
74 * lockups, which were only occurring with cards running in 8-bit mode ("force
75 * 8-bit operation" in Intel's SoftSet utility). This version of the driver
76 * sets the 82586 and the ASIC to 8-bit mode at startup; it also stops the
77 * CU before submitting a packet for transmission, and then restarts it as soon
78 * as the process of handing the packet is complete. This is definitely an
79 * unnecessary slowdown if the card is running in 16-bit mode; therefore one
6aa20a22 80 * should detect 16-bit vs 8-bit mode from the EEPROM settings and act
1da177e4
LT		 81 * accordingly. In 8-bit mode with this bugfix I'm getting about 150 K/s for
82 * ftp's, which is significantly better than I get in DOS, so the overhead of
83 * stopping and restarting the CU with each transmit is not prohibitive in
84 * practice.
85 *
86 * Update by David Woodhouse 11/5/99:
87 *
88 * I've seen "CU wedged" messages in 16-bit mode, on the Alpha architecture.
89 * I assume that this is because 16-bit accesses are actually handled as two
90 * 8-bit accesses.
91 */
92
93#ifdef __alpha__
94#define LOCKUP16 1
95#endif
96#ifndef LOCKUP16
97#define LOCKUP16 0
98#endif
6aa20a22 99
1da177e4
LT		 100#include <linux/module.h>
101#include <linux/kernel.h>
102#include <linux/types.h>
103#include <linux/fcntl.h>
104#include <linux/interrupt.h>
105#include <linux/ioport.h>
106#include <linux/string.h>
107#include <linux/in.h>
108#include <linux/delay.h>
109#include <linux/errno.h>
110#include <linux/init.h>
111#include <linux/netdevice.h>
112#include <linux/etherdevice.h>
113#include <linux/skbuff.h>
114#include <linux/slab.h>
115#include <linux/mca-legacy.h>
116#include <linux/spinlock.h>
117#include <linux/bitops.h>
118
119#include <asm/system.h>
120#include <asm/io.h>
121#include <asm/irq.h>
122
123#ifndef NET_DEBUG
124#define NET_DEBUG 4
125#endif
126
127#include "eexpress.h"
128
129#define EEXP_IO_EXTENT 16
130
131/*
132 * Private data declarations
133 */
134
135struct net_local
136{
137 struct net_device_stats stats;
138 unsigned long last_tx; /* jiffies when last transmit started */
139 unsigned long init_time; /* jiffies when eexp_hw_init586 called */
140 unsigned short rx_first; /* first rx buf, same as RX_BUF_START */
141 unsigned short rx_last; /* last rx buf */
142 unsigned short rx_ptr; /* first rx buf to look at */
143 unsigned short tx_head; /* next free tx buf */
144 unsigned short tx_reap; /* first in-use tx buf */
145 unsigned short tx_tail; /* previous tx buf to tx_head */
146 unsigned short tx_link; /* last known-executing tx buf */
147 unsigned short last_tx_restart; /* set to tx_link when we
148 restart the CU */
149 unsigned char started;
150 unsigned short rx_buf_start;
151 unsigned short rx_buf_end;
152 unsigned short num_tx_bufs;
153 unsigned short num_rx_bufs;
154 unsigned char width; /* 0 for 16bit, 1 for 8bit */
155 unsigned char was_promisc;
156 unsigned char old_mc_count;
157 spinlock_t lock;
158};
159
160/* This is the code and data that is downloaded to the EtherExpress card's
161 * memory at boot time.
162 */
163
164static unsigned short start_code[] = {
165/* 0x0000 */
166 0x0001, /* ISCP: busy - cleared after reset */
167 0x0008,0x0000,0x0000, /* offset,address (lo,hi) of SCB */
168
169 0x0000,0x0000, /* SCB: status, commands */
170 0x0000,0x0000, /* links to first command block,
171 first receive descriptor */
172 0x0000,0x0000, /* CRC error, alignment error counts */
173 0x0000,0x0000, /* out of resources, overrun error counts */
174
175 0x0000,0x0000, /* pad */
176 0x0000,0x0000,
177
178/* 0x20 -- start of 82586 CU program */
179#define CONF_LINK 0x20
6aa20a22 180 0x0000,Cmd_Config,
1da177e4
LT		 181 0x0032, /* link to next command */
182 0x080c, /* 12 bytes follow : fifo threshold=8 */
183 0x2e40, /* don't rx bad frames
184 * SRDY/ARDY => ext. sync. : preamble len=8
185 * take addresses from data buffers
186 * 6 bytes/address
187 */
188 0x6000, /* default backoff method & priority
189 * interframe spacing = 0x60 */
6aa20a22 190 0xf200, /* slot time=0x200
1da177e4
LT		 191 * max collision retry = 0xf */
192#define CONF_PROMISC 0x2e
6aa20a22 193 0x0000, /* no HDLC : normal CRC : enable broadcast
1da177e4
LT		 194 * disable promiscuous/multicast modes */
195 0x003c, /* minimum frame length = 60 octets) */
196
197 0x0000,Cmd_SetAddr,
198 0x003e, /* link to next command */
199#define CONF_HWADDR 0x38
200 0x0000,0x0000,0x0000, /* hardware address placed here */
201
202 0x0000,Cmd_MCast,
203 0x0076, /* link to next command */
204#define CONF_NR_MULTICAST 0x44
205 0x0000, /* number of multicast addresses */
206#define CONF_MULTICAST 0x46
207 0x0000, 0x0000, 0x0000, /* some addresses */
208 0x0000, 0x0000, 0x0000,
209 0x0000, 0x0000, 0x0000,
210 0x0000, 0x0000, 0x0000,
211 0x0000, 0x0000, 0x0000,
212 0x0000, 0x0000, 0x0000,
213 0x0000, 0x0000, 0x0000,
214 0x0000, 0x0000, 0x0000,
215
216#define CONF_DIAG_RESULT 0x76
217 0x0000, Cmd_Diag,
218 0x007c, /* link to next command */
219
220 0x0000,Cmd_TDR|Cmd_INT,
221 0x0084,
222#define CONF_TDR_RESULT 0x82
223 0x0000,
224
225 0x0000,Cmd_END|Cmd_Nop, /* end of configure sequence */
226 0x0084 /* dummy link */
227};
228
229/* maps irq number to EtherExpress magic value */
230static char irqrmap[] = { 0,0,1,2,3,4,0,0,0,1,5,6,0,0,0,0 };
231
232#ifdef CONFIG_MCA_LEGACY
233/* mapping of the first four bits of the second POS register */
234static unsigned short mca_iomap[] = {
235 0x270, 0x260, 0x250, 0x240, 0x230, 0x220, 0x210, 0x200,
236 0x370, 0x360, 0x350, 0x340, 0x330, 0x320, 0x310, 0x300
237};
238/* bits 5-7 of the second POS register */
239static char mca_irqmap[] = { 12, 9, 3, 4, 5, 10, 11, 15 };
6aa20a22 240#endif
1da177e4
LT		 241
242/*
243 * Prototypes for Linux interface
244 */
245
246static int eexp_open(struct net_device *dev);
247static int eexp_close(struct net_device *dev);
248static void eexp_timeout(struct net_device *dev);
249static struct net_device_stats *eexp_stats(struct net_device *dev);
250static int eexp_xmit(struct sk_buff *buf, struct net_device *dev);
251
7d12e780 252static irqreturn_t eexp_irq(int irq, void *dev_addr);
1da177e4
LT		 253static void eexp_set_multicast(struct net_device *dev);
254
255/*
256 * Prototypes for hardware access functions
257 */
258
259static void eexp_hw_rx_pio(struct net_device *dev);
260static void eexp_hw_tx_pio(struct net_device *dev, unsigned short *buf,
261 unsigned short len);
262static int eexp_hw_probe(struct net_device *dev,unsigned short ioaddr);
263static unsigned short eexp_hw_readeeprom(unsigned short ioaddr,
264 unsigned char location);
265
266static unsigned short eexp_hw_lasttxstat(struct net_device *dev);
267static void eexp_hw_txrestart(struct net_device *dev);
268
269static void eexp_hw_txinit (struct net_device *dev);
270static void eexp_hw_rxinit (struct net_device *dev);
271
272static void eexp_hw_init586 (struct net_device *dev);
273static void eexp_setup_filter (struct net_device *dev);
274
275static char *eexp_ifmap[]={"AUI", "BNC", "RJ45"};
276enum eexp_iftype {AUI=0, BNC=1, TPE=2};
277
278#define STARTED_RU 2
279#define STARTED_CU 1
280
281/*
282 * Primitive hardware access functions.
283 */
284
285static inline unsigned short scb_status(struct net_device *dev)
286{
287 return inw(dev->base_addr + 0xc008);
288}
289
290static inline unsigned short scb_rdcmd(struct net_device *dev)
291{
292 return inw(dev->base_addr + 0xc00a);
293}
294
295static inline void scb_command(struct net_device *dev, unsigned short cmd)
296{
297 outw(cmd, dev->base_addr + 0xc00a);
298}
299
300static inline void scb_wrcbl(struct net_device *dev, unsigned short val)
301{
302 outw(val, dev->base_addr + 0xc00c);
303}
304
305static inline void scb_wrrfa(struct net_device *dev, unsigned short val)
306{
307 outw(val, dev->base_addr + 0xc00e);
308}
309
310static inline void set_loopback(struct net_device *dev)
311{
312 outb(inb(dev->base_addr + Config) | 2, dev->base_addr + Config);
313}
314
315static inline void clear_loopback(struct net_device *dev)
316{
317 outb(inb(dev->base_addr + Config) & ~2, dev->base_addr + Config);
318}
319
320static inline unsigned short int SHADOW(short int addr)
321{
322 addr &= 0x1f;
323 if (addr > 0xf) addr += 0x3ff0;
324 return addr + 0x4000;
325}
326
327/*
328 * Linux interface
329 */
330
331/*
332 * checks for presence of EtherExpress card
333 */
334
335static int __init do_express_probe(struct net_device *dev)
336{
337 unsigned short *port;
338 static unsigned short ports[] = { 0x240,0x300,0x310,0x270,0x320,0x340,0 };
339 unsigned short ioaddr = dev->base_addr;
340 int dev_irq = dev->irq;
341 int err;
342
343 SET_MODULE_OWNER(dev);
344
345 dev->if_port = 0xff; /* not set */
346
347#ifdef CONFIG_MCA_LEGACY
348 if (MCA_bus) {
349 int slot = 0;
350
351 /*
352 * Only find one card at a time. Subsequent calls
353 * will find others, however, proper multicard MCA
354 * probing and setup can't be done with the
355 * old-style Space.c init routines. -- ASF
356 */
357 while (slot != MCA_NOTFOUND) {
358 int pos0, pos1;
6aa20a22 359
1da177e4
LT		 360 slot = mca_find_unused_adapter(0x628B, slot);
361 if (slot == MCA_NOTFOUND)
362 break;
363
364 pos0 = mca_read_stored_pos(slot, 2);
365 pos1 = mca_read_stored_pos(slot, 3);
366 ioaddr = mca_iomap[pos1&0xf];
367
368 dev->irq = mca_irqmap[(pos1>>4)&0x7];
6aa20a22 369
1da177e4
LT		 370 /*
371 * XXX: Transciever selection is done
6aa20a22 372 * differently on the MCA version.
1da177e4
LT		 373 * How to get it to select something
374 * other than external/AUI is currently
375 * unknown. This code is just for looks. -- ASF
376 */
377 if ((pos0 & 0x7) == 0x1)
378 dev->if_port = AUI;
379 else if ((pos0 & 0x7) == 0x5) {
380 if (pos1 & 0x80)
381 dev->if_port = BNC;
382 else
383 dev->if_port = TPE;
384 }
385
386 mca_set_adapter_name(slot, "Intel EtherExpress 16 MCA");
387 mca_set_adapter_procfn(slot, NULL, dev);
388 mca_mark_as_used(slot);
389
390 break;
391 }
392 }
393#endif
394 if (ioaddr&0xfe00) {
395 if (!request_region(ioaddr, EEXP_IO_EXTENT, "EtherExpress"))
396 return -EBUSY;
397 err = eexp_hw_probe(dev,ioaddr);
398 release_region(ioaddr, EEXP_IO_EXTENT);
399 return err;
400 } else if (ioaddr)
401 return -ENXIO;
402
403 for (port=&ports[0] ; *port ; port++ )
404 {
405 unsigned short sum = 0;
406 int i;
407 if (!request_region(*port, EEXP_IO_EXTENT, "EtherExpress"))
408 continue;
409 for ( i=0 ; i<4 ; i++ )
410 {
411 unsigned short t;
412 t = inb(*port + ID_PORT);
413 sum |= (t>>4) << ((t & 0x03)<<2);
414 }
415 if (sum==0xbaba && !eexp_hw_probe(dev,*port)) {
416 release_region(*port, EEXP_IO_EXTENT);
417 return 0;
418 }
419 release_region(*port, EEXP_IO_EXTENT);
420 dev->irq = dev_irq;
421 }
422 return -ENODEV;
423}
424
425#ifndef MODULE
426struct net_device * __init express_probe(int unit)
427{
428 struct net_device *dev = alloc_etherdev(sizeof(struct net_local));
429 int err;
430
431 if (!dev)
432 return ERR_PTR(-ENOMEM);
433
434 sprintf(dev->name, "eth%d", unit);
435 netdev_boot_setup_check(dev);
436
437 err = do_express_probe(dev);
b1fc5505 438 if (!err)
439 return dev;
1da177e4
LT		 440 free_netdev(dev);
441 return ERR_PTR(err);
442}
443#endif
444
445/*
446 * open and initialize the adapter, ready for use
447 */
448
449static int eexp_open(struct net_device *dev)
450{
451 int ret;
452 unsigned short ioaddr = dev->base_addr;
453 struct net_local *lp = netdev_priv(dev);
454
455#if NET_DEBUG > 6
456 printk(KERN_DEBUG "%s: eexp_open()\n", dev->name);
457#endif
458
459 if (!dev->irq || !irqrmap[dev->irq])
460 return -ENXIO;
461
462 ret = request_irq(dev->irq,&eexp_irq,0,dev->name,dev);
463 if (ret) return ret;
464
465 if (!request_region(ioaddr, EEXP_IO_EXTENT, "EtherExpress")) {
466 printk(KERN_WARNING "EtherExpress io port %x, is busy.\n"
467 , ioaddr);
468 goto err_out1;
469 }
470 if (!request_region(ioaddr+0x4000, EEXP_IO_EXTENT, "EtherExpress shadow")) {
471 printk(KERN_WARNING "EtherExpress io port %x, is busy.\n"
472 , ioaddr+0x4000);
473 goto err_out2;
474 }
475 if (!request_region(ioaddr+0x8000, EEXP_IO_EXTENT, "EtherExpress shadow")) {
476 printk(KERN_WARNING "EtherExpress io port %x, is busy.\n"
477 , ioaddr+0x8000);
478 goto err_out3;
479 }
480 if (!request_region(ioaddr+0xc000, EEXP_IO_EXTENT, "EtherExpress shadow")) {
481 printk(KERN_WARNING "EtherExpress io port %x, is busy.\n"
482 , ioaddr+0xc000);
483 goto err_out4;
484 }
6aa20a22 485
1da177e4
LT		 486 if (lp->width) {
487 printk("%s: forcing ASIC to 8-bit mode\n", dev->name);
488 outb(inb(dev->base_addr+Config)&~4, dev->base_addr+Config);
489 }
490
491 eexp_hw_init586(dev);
492 netif_start_queue(dev);
493#if NET_DEBUG > 6
494 printk(KERN_DEBUG "%s: leaving eexp_open()\n", dev->name);
495#endif
496 return 0;
497
498 err_out4:
499 release_region(ioaddr+0x8000, EEXP_IO_EXTENT);
500 err_out3:
501 release_region(ioaddr+0x4000, EEXP_IO_EXTENT);
502 err_out2:
503 release_region(ioaddr, EEXP_IO_EXTENT);
504 err_out1:
505 free_irq(dev->irq, dev);
506 return -EBUSY;
507}
508
509/*
510 * close and disable the interface, leaving the 586 in reset.
511 */
512
513static int eexp_close(struct net_device *dev)
514{
515 unsigned short ioaddr = dev->base_addr;
516 struct net_local *lp = netdev_priv(dev);
517
518 int irq = dev->irq;
519
520 netif_stop_queue(dev);
6aa20a22 521
1da177e4
LT		 522 outb(SIRQ_dis|irqrmap[irq],ioaddr+SET_IRQ);
523 lp->started = 0;
524 scb_command(dev, SCB_CUsuspend|SCB_RUsuspend);
525 outb(0,ioaddr+SIGNAL_CA);
526 free_irq(irq,dev);
527 outb(i586_RST,ioaddr+EEPROM_Ctrl);
528 release_region(ioaddr, EEXP_IO_EXTENT);
529 release_region(ioaddr+0x4000, 16);
530 release_region(ioaddr+0x8000, 16);
531 release_region(ioaddr+0xc000, 16);
532
533 return 0;
534}
535
536/*
537 * Return interface stats
538 */
539
540static struct net_device_stats *eexp_stats(struct net_device *dev)
541{
542 struct net_local *lp = netdev_priv(dev);
543
544 return &lp->stats;
545}
546
547/*
548 * This gets called when a higher level thinks we are broken. Check that
549 * nothing has become jammed in the CU.
550 */
551
552static void unstick_cu(struct net_device *dev)
553{
554 struct net_local *lp = netdev_priv(dev);
555 unsigned short ioaddr = dev->base_addr;
556
557 if (lp->started)
558 {
559 if ((jiffies - dev->trans_start)>50)
560 {
561 if (lp->tx_link==lp->last_tx_restart)
562 {
563 unsigned short boguscount=200,rsst;
564 printk(KERN_WARNING "%s: Retransmit timed out, status %04x, resetting...\n",
565 dev->name, scb_status(dev));
566 eexp_hw_txinit(dev);
567 lp->last_tx_restart = 0;
568 scb_wrcbl(dev, lp->tx_link);
569 scb_command(dev, SCB_CUstart);
570 outb(0,ioaddr+SIGNAL_CA);
571 while (!SCB_complete(rsst=scb_status(dev)))
572 {
573 if (!--boguscount)
574 {
575 boguscount=200;
576 printk(KERN_WARNING "%s: Reset timed out status %04x, retrying...\n",
577 dev->name,rsst);
578 scb_wrcbl(dev, lp->tx_link);
579 scb_command(dev, SCB_CUstart);
580 outb(0,ioaddr+SIGNAL_CA);
581 }
582 }
583 netif_wake_queue(dev);
584 }
585 else
586 {
587 unsigned short status = scb_status(dev);
588 if (SCB_CUdead(status))
589 {
590 unsigned short txstatus = eexp_hw_lasttxstat(dev);
591 printk(KERN_WARNING "%s: Transmit timed out, CU not active status %04x %04x, restarting...\n",
592 dev->name, status, txstatus);
593 eexp_hw_txrestart(dev);
594 }
595 else
596 {
597 unsigned short txstatus = eexp_hw_lasttxstat(dev);
598 if (netif_queue_stopped(dev) && !txstatus)
599 {
600 printk(KERN_WARNING "%s: CU wedged, status %04x %04x, resetting...\n",
601 dev->name,status,txstatus);
602 eexp_hw_init586(dev);
603 netif_wake_queue(dev);
604 }
605 else
606 {
607 printk(KERN_WARNING "%s: transmit timed out\n", dev->name);
608 }
609 }
610 }
611 }
612 }
613 else
614 {
615 if ((jiffies-lp->init_time)>10)
616 {
617 unsigned short status = scb_status(dev);
618 printk(KERN_WARNING "%s: i82586 startup timed out, status %04x, resetting...\n",
619 dev->name, status);
620 eexp_hw_init586(dev);
621 netif_wake_queue(dev);
622 }
623 }
624}
625
626static void eexp_timeout(struct net_device *dev)
627{
628 struct net_local *lp = netdev_priv(dev);
629#ifdef CONFIG_SMP
630 unsigned long flags;
631#endif
632 int status;
6aa20a22 633
1da177e4
LT		 634 disable_irq(dev->irq);
635
636 /*
637 * Best would be to use synchronize_irq(); spin_lock() here
638 * lets make it work first..
639 */
6aa20a22 640
1da177e4
LT		 641#ifdef CONFIG_SMP
642 spin_lock_irqsave(&lp->lock, flags);
643#endif
644
645 status = scb_status(dev);
646 unstick_cu(dev);
647 printk(KERN_INFO "%s: transmit timed out, %s?\n", dev->name,
648 (SCB_complete(status)?"lost interrupt":
649 "board on fire"));
650 lp->stats.tx_errors++;
651 lp->last_tx = jiffies;
652 if (!SCB_complete(status)) {
653 scb_command(dev, SCB_CUabort);
654 outb(0,dev->base_addr+SIGNAL_CA);
655 }
6aa20a22 656 netif_wake_queue(dev);
1da177e4
LT		 657#ifdef CONFIG_SMP
658 spin_unlock_irqrestore(&lp->lock, flags);
659#endif
660}
661
662/*
663 * Called to transmit a packet, or to allow us to right ourselves
664 * if the kernel thinks we've died.
665 */
666static int eexp_xmit(struct sk_buff *buf, struct net_device *dev)
667{
668 struct net_local *lp = netdev_priv(dev);
669 short length = buf->len;
670#ifdef CONFIG_SMP
671 unsigned long flags;
672#endif
673
674#if NET_DEBUG > 6
675 printk(KERN_DEBUG "%s: eexp_xmit()\n", dev->name);
676#endif
677
678 if (buf->len < ETH_ZLEN) {
5b057c6b 679 if (skb_padto(buf, ETH_ZLEN))
1da177e4
LT		 680 return 0;
681 length = ETH_ZLEN;
682 }
683
684 disable_irq(dev->irq);
685
686 /*
687 * Best would be to use synchronize_irq(); spin_lock() here
688 * lets make it work first..
689 */
6aa20a22 690
1da177e4
LT		 691#ifdef CONFIG_SMP
692 spin_lock_irqsave(&lp->lock, flags);
693#endif
6aa20a22 694
1da177e4
LT		 695 {
696 unsigned short *data = (unsigned short *)buf->data;
697
698 lp->stats.tx_bytes += length;
699
700 eexp_hw_tx_pio(dev,data,length);
701 }
702 dev_kfree_skb(buf);
703#ifdef CONFIG_SMP
704 spin_unlock_irqrestore(&lp->lock, flags);
705#endif
706 enable_irq(dev->irq);
707 return 0;
708}
709
1da177e4
LT		 710/*
711 * Handle an EtherExpress interrupt
712 * If we've finished initializing, start the RU and CU up.
713 * If we've already started, reap tx buffers, handle any received packets,
714 * check to make sure we've not become wedged.
715 */
716
717static unsigned short eexp_start_irq(struct net_device *dev,
718 unsigned short status)
719{
720 unsigned short ack_cmd = SCB_ack(status);
721 struct net_local *lp = netdev_priv(dev);
722 unsigned short ioaddr = dev->base_addr;
723 if ((dev->flags & IFF_UP) && !(lp->started & STARTED_CU)) {
724 short diag_status, tdr_status;
725 while (SCB_CUstat(status)==2)
726 status = scb_status(dev);
727#if NET_DEBUG > 4
728 printk("%s: CU went non-active (status %04x)\n",
729 dev->name, status);
730#endif
731
732 outw(CONF_DIAG_RESULT & ~31, ioaddr + SM_PTR);
733 diag_status = inw(ioaddr + SHADOW(CONF_DIAG_RESULT));
734 if (diag_status & 1<<11) {
6aa20a22 735 printk(KERN_WARNING "%s: 82586 failed self-test\n",
1da177e4
LT		 736 dev->name);
737 } else if (!(diag_status & 1<<13)) {
738 printk(KERN_WARNING "%s: 82586 self-test failed to complete\n", dev->name);
739 }
740
741 outw(CONF_TDR_RESULT & ~31, ioaddr + SM_PTR);
742 tdr_status = inw(ioaddr + SHADOW(CONF_TDR_RESULT));
743 if (tdr_status & (TDR_SHORT|TDR_OPEN)) {
744 printk(KERN_WARNING "%s: TDR reports cable %s at %d tick%s\n", dev->name, (tdr_status & TDR_SHORT)?"short":"broken", tdr_status & TDR_TIME, ((tdr_status & TDR_TIME) != 1) ? "s" : "");
6aa20a22 745 }
1da177e4
LT		 746 else if (tdr_status & TDR_XCVRPROBLEM) {
747 printk(KERN_WARNING "%s: TDR reports transceiver problem\n", dev->name);
748 }
749 else if (tdr_status & TDR_LINKOK) {
750#if NET_DEBUG > 4
751 printk(KERN_DEBUG "%s: TDR reports link OK\n", dev->name);
752#endif
753 } else {
754 printk("%s: TDR is ga-ga (status %04x)\n", dev->name,
755 tdr_status);
756 }
6aa20a22 757
1da177e4
LT		 758 lp->started |= STARTED_CU;
759 scb_wrcbl(dev, lp->tx_link);
760 /* if the RU isn't running, start it now */
761 if (!(lp->started & STARTED_RU)) {
762 ack_cmd |= SCB_RUstart;
763 scb_wrrfa(dev, lp->rx_buf_start);
764 lp->rx_ptr = lp->rx_buf_start;
765 lp->started |= STARTED_RU;
766 }
767 ack_cmd |= SCB_CUstart | 0x2000;
768 }
769
6aa20a22 770 if ((dev->flags & IFF_UP) && !(lp->started & STARTED_RU) && SCB_RUstat(status)==4)
1da177e4
LT		 771 lp->started|=STARTED_RU;
772
773 return ack_cmd;
774}
775
776static void eexp_cmd_clear(struct net_device *dev)
777{
778 unsigned long int oldtime = jiffies;
779 while (scb_rdcmd(dev) && ((jiffies-oldtime)<10));
780 if (scb_rdcmd(dev)) {
781 printk("%s: command didn't clear\n", dev->name);
782 }
783}
6aa20a22 784
7d12e780 785static irqreturn_t eexp_irq(int irq, void *dev_info)
1da177e4
LT		 786{
787 struct net_device *dev = dev_info;
788 struct net_local *lp;
789 unsigned short ioaddr,status,ack_cmd;
790 unsigned short old_read_ptr, old_write_ptr;
791
1da177e4
LT		 792 lp = netdev_priv(dev);
793 ioaddr = dev->base_addr;
794
795 spin_lock(&lp->lock);
796
797 old_read_ptr = inw(ioaddr+READ_PTR);
798 old_write_ptr = inw(ioaddr+WRITE_PTR);
799
800 outb(SIRQ_dis|irqrmap[irq],ioaddr+SET_IRQ);
801
6aa20a22 802
1da177e4
LT		 803 status = scb_status(dev);
804
805#if NET_DEBUG > 4
806 printk(KERN_DEBUG "%s: interrupt (status %x)\n", dev->name, status);
807#endif
808
809 if (lp->started == (STARTED_CU | STARTED_RU)) {
810
811 do {
812 eexp_cmd_clear(dev);
813
814 ack_cmd = SCB_ack(status);
815 scb_command(dev, ack_cmd);
816 outb(0,ioaddr+SIGNAL_CA);
817
818 eexp_cmd_clear(dev);
819
820 if (SCB_complete(status)) {
821 if (!eexp_hw_lasttxstat(dev)) {
822 printk("%s: tx interrupt but no status\n", dev->name);
823 }
824 }
6aa20a22
JG		 825
826 if (SCB_rxdframe(status))
1da177e4
LT		 827 eexp_hw_rx_pio(dev);
828
829 status = scb_status(dev);
830 } while (status & 0xc000);
831
6aa20a22 832 if (SCB_RUdead(status))
1da177e4
LT		 833 {
834 printk(KERN_WARNING "%s: RU stopped: status %04x\n",
835 dev->name,status);
836#if 0
837 printk(KERN_WARNING "%s: cur_rfd=%04x, cur_rbd=%04x\n", dev->name, lp->cur_rfd, lp->cur_rbd);
838 outw(lp->cur_rfd, ioaddr+READ_PTR);
839 printk(KERN_WARNING "%s: [%04x]\n", dev->name, inw(ioaddr+DATAPORT));
840 outw(lp->cur_rfd+6, ioaddr+READ_PTR);
841 printk(KERN_WARNING "%s: rbd is %04x\n", dev->name, rbd= inw(ioaddr+DATAPORT));
842 outw(rbd, ioaddr+READ_PTR);
843 printk(KERN_WARNING "%s: [%04x %04x] ", dev->name, inw(ioaddr+DATAPORT), inw(ioaddr+DATAPORT));
844 outw(rbd+8, ioaddr+READ_PTR);
845 printk("[%04x]\n", inw(ioaddr+DATAPORT));
846#endif
847 lp->stats.rx_errors++;
848#if 1
849 eexp_hw_rxinit(dev);
850#else
851 lp->cur_rfd = lp->first_rfd;
852#endif
853 scb_wrrfa(dev, lp->rx_buf_start);
854 scb_command(dev, SCB_RUstart);
855 outb(0,ioaddr+SIGNAL_CA);
6aa20a22 856 }
1da177e4 857 } else {
6aa20a22 858 if (status & 0x8000)
1da177e4
LT		 859 ack_cmd = eexp_start_irq(dev, status);
860 else
861 ack_cmd = SCB_ack(status);
862 scb_command(dev, ack_cmd);
863 outb(0,ioaddr+SIGNAL_CA);
864 }
865
866 eexp_cmd_clear(dev);
867
6aa20a22 868 outb(SIRQ_en|irqrmap[irq],ioaddr+SET_IRQ);
1da177e4 869
6aa20a22 870#if NET_DEBUG > 6
1da177e4
LT		 871 printk("%s: leaving eexp_irq()\n", dev->name);
872#endif
873 outw(old_read_ptr, ioaddr+READ_PTR);
874 outw(old_write_ptr, ioaddr+WRITE_PTR);
6aa20a22 875
1da177e4
LT		 876 spin_unlock(&lp->lock);
877 return IRQ_HANDLED;
878}
879
880/*
881 * Hardware access functions
882 */
883
884/*
885 * Set the cable type to use.
886 */
887
888static void eexp_hw_set_interface(struct net_device *dev)
889{
890 unsigned char oldval = inb(dev->base_addr + 0x300e);
891 oldval &= ~0x82;
892 switch (dev->if_port) {
893 case TPE:
894 oldval |= 0x2;
895 case BNC:
896 oldval |= 0x80;
897 break;
898 }
899 outb(oldval, dev->base_addr+0x300e);
900 mdelay(20);
901}
902
903/*
904 * Check all the receive buffers, and hand any received packets
905 * to the upper levels. Basic sanity check on each frame
906 * descriptor, though we don't bother trying to fix broken ones.
907 */
908
909static void eexp_hw_rx_pio(struct net_device *dev)
910{
911 struct net_local *lp = netdev_priv(dev);
912 unsigned short rx_block = lp->rx_ptr;
913 unsigned short boguscount = lp->num_rx_bufs;
914 unsigned short ioaddr = dev->base_addr;
915 unsigned short status;
916
917#if NET_DEBUG > 6
918 printk(KERN_DEBUG "%s: eexp_hw_rx()\n", dev->name);
919#endif
920
921 do {
922 unsigned short rfd_cmd, rx_next, pbuf, pkt_len;
6aa20a22 923
1da177e4
LT		 924 outw(rx_block, ioaddr + READ_PTR);
925 status = inw(ioaddr + DATAPORT);
926
927 if (FD_Done(status))
928 {
929 rfd_cmd = inw(ioaddr + DATAPORT);
930 rx_next = inw(ioaddr + DATAPORT);
931 pbuf = inw(ioaddr + DATAPORT);
6aa20a22 932
1da177e4
LT		 933 outw(pbuf, ioaddr + READ_PTR);
934 pkt_len = inw(ioaddr + DATAPORT);
935
936 if (rfd_cmd!=0x0000)
937 {
938 printk(KERN_WARNING "%s: rfd_cmd not zero:0x%04x\n",
939 dev->name, rfd_cmd);
940 continue;
941 }
942 else if (pbuf!=rx_block+0x16)
943 {
6aa20a22 944 printk(KERN_WARNING "%s: rfd and rbd out of sync 0x%04x 0x%04x\n",
1da177e4
LT		 945 dev->name, rx_block+0x16, pbuf);
946 continue;
947 }
6aa20a22 948 else if ((pkt_len & 0xc000)!=0xc000)
1da177e4
LT		 949 {
950 printk(KERN_WARNING "%s: EOF or F not set on received buffer (%04x)\n",
951 dev->name, pkt_len & 0xc000);
952 continue;
953 }
6aa20a22 954 else if (!FD_OK(status))
1da177e4
LT		 955 {
956 lp->stats.rx_errors++;
957 if (FD_CRC(status))
958 lp->stats.rx_crc_errors++;
959 if (FD_Align(status))
960 lp->stats.rx_frame_errors++;
961 if (FD_Resrc(status))
962 lp->stats.rx_fifo_errors++;
963 if (FD_DMA(status))
964 lp->stats.rx_over_errors++;
965 if (FD_Short(status))
966 lp->stats.rx_length_errors++;
967 }
968 else
969 {
970 struct sk_buff *skb;
971 pkt_len &= 0x3fff;
972 skb = dev_alloc_skb(pkt_len+16);
973 if (skb == NULL)
974 {
975 printk(KERN_WARNING "%s: Memory squeeze, dropping packet\n",dev->name);
976 lp->stats.rx_dropped++;
977 break;
978 }
1da177e4
LT		 979 skb_reserve(skb, 2);
980 outw(pbuf+10, ioaddr+READ_PTR);
981 insw(ioaddr+DATAPORT, skb_put(skb,pkt_len),(pkt_len+1)>>1);
982 skb->protocol = eth_type_trans(skb,dev);
983 netif_rx(skb);
984 dev->last_rx = jiffies;
985 lp->stats.rx_packets++;
986 lp->stats.rx_bytes += pkt_len;
987 }
988 outw(rx_block, ioaddr+WRITE_PTR);
989 outw(0, ioaddr+DATAPORT);
990 outw(0, ioaddr+DATAPORT);
991 rx_block = rx_next;
992 }
993 } while (FD_Done(status) && boguscount--);
994 lp->rx_ptr = rx_block;
995}
996
997/*
998 * Hand a packet to the card for transmission
999 * If we get here, we MUST have already checked
1000 * to make sure there is room in the transmit
1001 * buffer region.
1002 */
1003
1004static void eexp_hw_tx_pio(struct net_device *dev, unsigned short *buf,
1005 unsigned short len)
1006{
1007 struct net_local *lp = netdev_priv(dev);
1008 unsigned short ioaddr = dev->base_addr;
1009
1010 if (LOCKUP16 || lp->width) {
1011 /* Stop the CU so that there is no chance that it
1012 jumps off to a bogus address while we are writing the
6aa20a22 1013 pointer to the next transmit packet in 8-bit mode --
1da177e4 1014 this eliminates the "CU wedged" errors in 8-bit mode.
6aa20a22 1015 (Zoltan Szilagyi 10-12-96) */
1da177e4
LT		 1016 scb_command(dev, SCB_CUsuspend);
1017 outw(0xFFFF, ioaddr+SIGNAL_CA);
1018 }
1019
1020 outw(lp->tx_head, ioaddr + WRITE_PTR);
1021
1022 outw(0x0000, ioaddr + DATAPORT);
1023 outw(Cmd_INT|Cmd_Xmit, ioaddr + DATAPORT);
1024 outw(lp->tx_head+0x08, ioaddr + DATAPORT);
1025 outw(lp->tx_head+0x0e, ioaddr + DATAPORT);
1026
1027 outw(0x0000, ioaddr + DATAPORT);
1028 outw(0x0000, ioaddr + DATAPORT);
1029 outw(lp->tx_head+0x08, ioaddr + DATAPORT);
1030
1031 outw(0x8000|len, ioaddr + DATAPORT);
1032 outw(-1, ioaddr + DATAPORT);
1033 outw(lp->tx_head+0x16, ioaddr + DATAPORT);
1034 outw(0, ioaddr + DATAPORT);
1035
1036 outsw(ioaddr + DATAPORT, buf, (len+1)>>1);
1037
1038 outw(lp->tx_tail+0xc, ioaddr + WRITE_PTR);
1039 outw(lp->tx_head, ioaddr + DATAPORT);
1040
1041 dev->trans_start = jiffies;
1042 lp->tx_tail = lp->tx_head;
1043 if (lp->tx_head==TX_BUF_START+((lp->num_tx_bufs-1)*TX_BUF_SIZE))
1044 lp->tx_head = TX_BUF_START;
1045 else
1046 lp->tx_head += TX_BUF_SIZE;
1047 if (lp->tx_head != lp->tx_reap)
1048 netif_wake_queue(dev);
6aa20a22 1049
1da177e4
LT		 1050 if (LOCKUP16 || lp->width) {
1051 /* Restart the CU so that the packet can actually
1052 be transmitted. (Zoltan Szilagyi 10-12-96) */
1053 scb_command(dev, SCB_CUresume);
1054 outw(0xFFFF, ioaddr+SIGNAL_CA);
1055 }
1056
1057 lp->stats.tx_packets++;
1058 lp->last_tx = jiffies;
1059}
1060
1061/*
1062 * Sanity check the suspected EtherExpress card
1063 * Read hardware address, reset card, size memory and initialize buffer
1064 * memory pointers. These are held in dev->priv, in case someone has more
1065 * than one card in a machine.
1066 */
1067
1068static int __init eexp_hw_probe(struct net_device *dev, unsigned short ioaddr)
1069{
1070 unsigned short hw_addr[3];
1071 unsigned char buswidth;
1072 unsigned int memory_size;
1073 int i;
1074 unsigned short xsum = 0;
1075 struct net_local *lp = netdev_priv(dev);
1076
1077 printk("%s: EtherExpress 16 at %#x ",dev->name,ioaddr);
1078
1079 outb(ASIC_RST, ioaddr+EEPROM_Ctrl);
1080 outb(0, ioaddr+EEPROM_Ctrl);
1081 udelay(500);
1082 outb(i586_RST, ioaddr+EEPROM_Ctrl);
1083
1084 hw_addr[0] = eexp_hw_readeeprom(ioaddr,2);
1085 hw_addr[1] = eexp_hw_readeeprom(ioaddr,3);
1086 hw_addr[2] = eexp_hw_readeeprom(ioaddr,4);
1087
1088 /* Standard Address or Compaq LTE Address */
1089 if (!((hw_addr[2]==0x00aa && ((hw_addr[1] & 0xff00)==0x0000)) ||
6aa20a22 1090 (hw_addr[2]==0x0080 && ((hw_addr[1] & 0xff00)==0x5F00))))
1da177e4
LT		 1091 {
1092 printk(" rejected: invalid address %04x%04x%04x\n",
1093 hw_addr[2],hw_addr[1],hw_addr[0]);
1094 return -ENODEV;
1095 }
1096
1097 /* Calculate the EEPROM checksum. Carry on anyway if it's bad,
1098 * though.
1099 */
1100 for (i = 0; i < 64; i++)
1101 xsum += eexp_hw_readeeprom(ioaddr, i);
1102 if (xsum != 0xbaba)
1103 printk(" (bad EEPROM xsum 0x%02x)", xsum);
1104
1105 dev->base_addr = ioaddr;
1106 for ( i=0 ; i<6 ; i++ )
1107 dev->dev_addr[i] = ((unsigned char *)hw_addr)[5-i];
1108
1109 {
1110 static char irqmap[]={0, 9, 3, 4, 5, 10, 11, 0};
1111 unsigned short setupval = eexp_hw_readeeprom(ioaddr,0);
1112
1113 /* Use the IRQ from EEPROM if none was given */
1114 if (!dev->irq)
1115 dev->irq = irqmap[setupval>>13];
1116
1117 if (dev->if_port == 0xff) {
1118 dev->if_port = !(setupval & 0x1000) ? AUI :
1119 eexp_hw_readeeprom(ioaddr,5) & 0x1 ? TPE : BNC;
1120 }
1121
1122 buswidth = !((setupval & 0x400) >> 10);
1123 }
1124
1125 memset(lp, 0, sizeof(struct net_local));
1126 spin_lock_init(&lp->lock);
1127
6aa20a22 1128 printk("(IRQ %d, %s connector, %d-bit bus", dev->irq,
1da177e4 1129 eexp_ifmap[dev->if_port], buswidth?8:16);
6aa20a22 1130
1da177e4
LT		 1131 if (!request_region(dev->base_addr + 0x300e, 1, "EtherExpress"))
1132 return -EBUSY;
1133
1134 eexp_hw_set_interface(dev);
6aa20a22 1135
1da177e4 1136 release_region(dev->base_addr + 0x300e, 1);
6aa20a22 1137
1da177e4
LT		 1138 /* Find out how much RAM we have on the card */
1139 outw(0, dev->base_addr + WRITE_PTR);
1140 for (i = 0; i < 32768; i++)
1141 outw(0, dev->base_addr + DATAPORT);
1142
1143 for (memory_size = 0; memory_size < 64; memory_size++)
1144 {
1145 outw(memory_size<<10, dev->base_addr + READ_PTR);
1146 if (inw(dev->base_addr+DATAPORT))
1147 break;
1148 outw(memory_size<<10, dev->base_addr + WRITE_PTR);
1149 outw(memory_size | 0x5000, dev->base_addr+DATAPORT);
1150 outw(memory_size<<10, dev->base_addr + READ_PTR);
1151 if (inw(dev->base_addr+DATAPORT) != (memory_size | 0x5000))
1152 break;
1153 }
1154
1155 /* Sort out the number of buffers. We may have 16, 32, 48 or 64k
1156 * of RAM to play with.
1157 */
1158 lp->num_tx_bufs = 4;
1159 lp->rx_buf_end = 0x3ff6;
1160 switch (memory_size)
1161 {
1162 case 64:
1163 lp->rx_buf_end += 0x4000;
1164 case 48:
1165 lp->num_tx_bufs += 4;
1166 lp->rx_buf_end += 0x4000;
1167 case 32:
1168 lp->rx_buf_end += 0x4000;
1169 case 16:
1170 printk(", %dk RAM)\n", memory_size);
1171 break;
1172 default:
1173 printk(") bad memory size (%dk).\n", memory_size);
1174 return -ENODEV;
1175 break;
1176 }
1177
1178 lp->rx_buf_start = TX_BUF_START + (lp->num_tx_bufs*TX_BUF_SIZE);
1179 lp->width = buswidth;
1180
1181 dev->open = eexp_open;
1182 dev->stop = eexp_close;
1183 dev->hard_start_xmit = eexp_xmit;
1184 dev->get_stats = eexp_stats;
1185 dev->set_multicast_list = &eexp_set_multicast;
1186 dev->tx_timeout = eexp_timeout;
1187 dev->watchdog_timeo = 2*HZ;
b1fc5505 1188
1189 return register_netdev(dev);
1da177e4
LT		 1190}
1191
1192/*
1193 * Read a word from the EtherExpress on-board serial EEPROM.
1194 * The EEPROM contains 64 words of 16 bits.
1195 */
1196static unsigned short __init eexp_hw_readeeprom(unsigned short ioaddr,
1197 unsigned char location)
1198{
1199 unsigned short cmd = 0x180|(location&0x7f);
1200 unsigned short rval = 0,wval = EC_CS|i586_RST;
1201 int i;
1202
1203 outb(EC_CS|i586_RST,ioaddr+EEPROM_Ctrl);
1204 for (i=0x100 ; i ; i>>=1 )
1205 {
1206 if (cmd&i)
1207 wval |= EC_Wr;
1208 else
1209 wval &= ~EC_Wr;
1210
1211 outb(wval,ioaddr+EEPROM_Ctrl);
1212 outb(wval|EC_Clk,ioaddr+EEPROM_Ctrl);
1213 eeprom_delay();
1214 outb(wval,ioaddr+EEPROM_Ctrl);
1215 eeprom_delay();
1216 }
1217 wval &= ~EC_Wr;
1218 outb(wval,ioaddr+EEPROM_Ctrl);
1219 for (i=0x8000 ; i ; i>>=1 )
1220 {
1221 outb(wval|EC_Clk,ioaddr+EEPROM_Ctrl);
1222 eeprom_delay();
1223 if (inb(ioaddr+EEPROM_Ctrl)&EC_Rd)
1224 rval |= i;
1225 outb(wval,ioaddr+EEPROM_Ctrl);
1226 eeprom_delay();
1227 }
1228 wval &= ~EC_CS;
1229 outb(wval|EC_Clk,ioaddr+EEPROM_Ctrl);
1230 eeprom_delay();
1231 outb(wval,ioaddr+EEPROM_Ctrl);
1232 eeprom_delay();
1233 return rval;
1234}
1235
1236/*
1237 * Reap tx buffers and return last transmit status.
1238 * if ==0 then either:
1239 * a) we're not transmitting anything, so why are we here?
1240 * b) we've died.
1241 * otherwise, Stat_Busy(return) means we've still got some packets
1242 * to transmit, Stat_Done(return) means our buffers should be empty
1243 * again
1244 */
1245
1246static unsigned short eexp_hw_lasttxstat(struct net_device *dev)
1247{
1248 struct net_local *lp = netdev_priv(dev);
1249 unsigned short tx_block = lp->tx_reap;
1250 unsigned short status;
1251
1252 if (!netif_queue_stopped(dev) && lp->tx_head==lp->tx_reap)
1253 return 0x0000;
1254
1255 do
1256 {
1257 outw(tx_block & ~31, dev->base_addr + SM_PTR);
1258 status = inw(dev->base_addr + SHADOW(tx_block));
1259 if (!Stat_Done(status))
1260 {
1261 lp->tx_link = tx_block;
1262 return status;
1263 }
1264 else
1265 {
1266 lp->last_tx_restart = 0;
1267 lp->stats.collisions += Stat_NoColl(status);
1268 if (!Stat_OK(status))
1269 {
1270 char *whatsup = NULL;
1271 lp->stats.tx_errors++;
6aa20a22 1272 if (Stat_Abort(status))
1da177e4
LT		 1273 lp->stats.tx_aborted_errors++;
1274 if (Stat_TNoCar(status)) {
1275 whatsup = "aborted, no carrier";
1276 lp->stats.tx_carrier_errors++;
1277 }
1278 if (Stat_TNoCTS(status)) {
1279 whatsup = "aborted, lost CTS";
1280 lp->stats.tx_carrier_errors++;
1281 }
1282 if (Stat_TNoDMA(status)) {
1283 whatsup = "FIFO underran";
1284 lp->stats.tx_fifo_errors++;
1285 }
1286 if (Stat_TXColl(status)) {
1287 whatsup = "aborted, too many collisions";
1288 lp->stats.tx_aborted_errors++;
1289 }
1290 if (whatsup)
1291 printk(KERN_INFO "%s: transmit %s\n",
1292 dev->name, whatsup);
1293 }
1294 else
1295 lp->stats.tx_packets++;
1296 }
1297 if (tx_block == TX_BUF_START+((lp->num_tx_bufs-1)*TX_BUF_SIZE))
1298 lp->tx_reap = tx_block = TX_BUF_START;
1299 else
1300 lp->tx_reap = tx_block += TX_BUF_SIZE;
1301 netif_wake_queue(dev);
1302 }
1303 while (lp->tx_reap != lp->tx_head);
1304
1305 lp->tx_link = lp->tx_tail + 0x08;
1306
1307 return status;
1308}
1309
1310/*
1311 * This should never happen. It is called when some higher routine detects
1312 * that the CU has stopped, to try to restart it from the last packet we knew
1313 * we were working on, or the idle loop if we had finished for the time.
1314 */
1315
1316static void eexp_hw_txrestart(struct net_device *dev)
1317{
1318 struct net_local *lp = netdev_priv(dev);
1319 unsigned short ioaddr = dev->base_addr;
1320
1321 lp->last_tx_restart = lp->tx_link;
1322 scb_wrcbl(dev, lp->tx_link);
1323 scb_command(dev, SCB_CUstart);
1324 outb(0,ioaddr+SIGNAL_CA);
1325
1326 {
1327 unsigned short boguscount=50,failcount=5;
1328 while (!scb_status(dev))
1329 {
1330 if (!--boguscount)
1331 {
1332 if (--failcount)
1333 {
1334 printk(KERN_WARNING "%s: CU start timed out, status %04x, cmd %04x\n", dev->name, scb_status(dev), scb_rdcmd(dev));
1335 scb_wrcbl(dev, lp->tx_link);
1336 scb_command(dev, SCB_CUstart);
1337 outb(0,ioaddr+SIGNAL_CA);
1338 boguscount = 100;
1339 }
1340 else
1341 {
1342 printk(KERN_WARNING "%s: Failed to restart CU, resetting board...\n",dev->name);
1343 eexp_hw_init586(dev);
1344 netif_wake_queue(dev);
1345 return;
1346 }
1347 }
1348 }
1349 }
1350}
1351
1352/*
1353 * Writes down the list of transmit buffers into card memory. Each
1354 * entry consists of an 82586 transmit command, followed by a jump
1355 * pointing to itself. When we want to transmit a packet, we write
1356 * the data into the appropriate transmit buffer and then modify the
1357 * preceding jump to point at the new transmit command. This means that
1358 * the 586 command unit is continuously active.
1359 */
1360
1361static void eexp_hw_txinit(struct net_device *dev)
1362{
1363 struct net_local *lp = netdev_priv(dev);
1364 unsigned short tx_block = TX_BUF_START;
1365 unsigned short curtbuf;
1366 unsigned short ioaddr = dev->base_addr;
1367
1368 for ( curtbuf=0 ; curtbuf<lp->num_tx_bufs ; curtbuf++ )
1369 {
1370 outw(tx_block, ioaddr + WRITE_PTR);
1371
1372 outw(0x0000, ioaddr + DATAPORT);
1373 outw(Cmd_INT|Cmd_Xmit, ioaddr + DATAPORT);
1374 outw(tx_block+0x08, ioaddr + DATAPORT);
1375 outw(tx_block+0x0e, ioaddr + DATAPORT);
1376
1377 outw(0x0000, ioaddr + DATAPORT);
1378 outw(0x0000, ioaddr + DATAPORT);
1379 outw(tx_block+0x08, ioaddr + DATAPORT);
1380
1381 outw(0x8000, ioaddr + DATAPORT);
1382 outw(-1, ioaddr + DATAPORT);
1383 outw(tx_block+0x16, ioaddr + DATAPORT);
1384 outw(0x0000, ioaddr + DATAPORT);
1385
1386 tx_block += TX_BUF_SIZE;
1387 }
1388 lp->tx_head = TX_BUF_START;
1389 lp->tx_reap = TX_BUF_START;
1390 lp->tx_tail = tx_block - TX_BUF_SIZE;
1391 lp->tx_link = lp->tx_tail + 0x08;
1392 lp->rx_buf_start = tx_block;
1393
1394}
1395
1396/*
1397 * Write the circular list of receive buffer descriptors to card memory.
1398 * The end of the list isn't marked, which means that the 82586 receive
1399 * unit will loop until buffers become available (this avoids it giving us
1400 * "out of resources" messages).
1401 */
1402
1403static void eexp_hw_rxinit(struct net_device *dev)
1404{
1405 struct net_local *lp = netdev_priv(dev);
1406 unsigned short rx_block = lp->rx_buf_start;
1407 unsigned short ioaddr = dev->base_addr;
1408
1409 lp->num_rx_bufs = 0;
1410 lp->rx_first = lp->rx_ptr = rx_block;
1411 do
1412 {
1413 lp->num_rx_bufs++;
1414
1415 outw(rx_block, ioaddr + WRITE_PTR);
1416
1417 outw(0, ioaddr + DATAPORT); outw(0, ioaddr+DATAPORT);
1418 outw(rx_block + RX_BUF_SIZE, ioaddr+DATAPORT);
1419 outw(0xffff, ioaddr+DATAPORT);
1420
1421 outw(0x0000, ioaddr+DATAPORT);
1422 outw(0xdead, ioaddr+DATAPORT);
1423 outw(0xdead, ioaddr+DATAPORT);
1424 outw(0xdead, ioaddr+DATAPORT);
1425 outw(0xdead, ioaddr+DATAPORT);
1426 outw(0xdead, ioaddr+DATAPORT);
1427 outw(0xdead, ioaddr+DATAPORT);
1428
1429 outw(0x0000, ioaddr+DATAPORT);
1430 outw(rx_block + RX_BUF_SIZE + 0x16, ioaddr+DATAPORT);
1431 outw(rx_block + 0x20, ioaddr+DATAPORT);
1432 outw(0, ioaddr+DATAPORT);
1433 outw(RX_BUF_SIZE-0x20, ioaddr+DATAPORT);
1434
1435 lp->rx_last = rx_block;
1436 rx_block += RX_BUF_SIZE;
1437 } while (rx_block <= lp->rx_buf_end-RX_BUF_SIZE);
1438
1439
1440 /* Make first Rx frame descriptor point to first Rx buffer
1441 descriptor */
1442 outw(lp->rx_first + 6, ioaddr+WRITE_PTR);
1443 outw(lp->rx_first + 0x16, ioaddr+DATAPORT);
1444
1445 /* Close Rx frame descriptor ring */
1446 outw(lp->rx_last + 4, ioaddr+WRITE_PTR);
1447 outw(lp->rx_first, ioaddr+DATAPORT);
6aa20a22 1448
1da177e4
LT		 1449 /* Close Rx buffer descriptor ring */
1450 outw(lp->rx_last + 0x16 + 2, ioaddr+WRITE_PTR);
1451 outw(lp->rx_first + 0x16, ioaddr+DATAPORT);
6aa20a22 1452
1da177e4
LT		 1453}
1454
1455/*
1456 * Un-reset the 586, and start the configuration sequence. We don't wait for
1457 * this to finish, but allow the interrupt handler to start the CU and RU for
1458 * us. We can't start the receive/transmission system up before we know that
1459 * the hardware is configured correctly.
1460 */
1461
1462static void eexp_hw_init586(struct net_device *dev)
1463{
1464 struct net_local *lp = netdev_priv(dev);
1465 unsigned short ioaddr = dev->base_addr;
1466 int i;
1467
1468#if NET_DEBUG > 6
1469 printk("%s: eexp_hw_init586()\n", dev->name);
1470#endif
1471
1472 lp->started = 0;
1473
1474 set_loopback(dev);
1475
1476 outb(SIRQ_dis|irqrmap[dev->irq],ioaddr+SET_IRQ);
1477
1478 /* Download the startup code */
1479 outw(lp->rx_buf_end & ~31, ioaddr + SM_PTR);
1480 outw(lp->width?0x0001:0x0000, ioaddr + 0x8006);
1481 outw(0x0000, ioaddr + 0x8008);
1482 outw(0x0000, ioaddr + 0x800a);
1483 outw(0x0000, ioaddr + 0x800c);
1484 outw(0x0000, ioaddr + 0x800e);
1485
1486 for (i = 0; i < (sizeof(start_code)); i+=32) {
1487 int j;
1488 outw(i, ioaddr + SM_PTR);
1489 for (j = 0; j < 16; j+=2)
1490 outw(start_code[(i+j)/2],
1491 ioaddr+0x4000+j);
1492 for (j = 0; j < 16; j+=2)
1493 outw(start_code[(i+j+16)/2],
1494 ioaddr+0x8000+j);
1495 }
1496
1497 /* Do we want promiscuous mode or multicast? */
1498 outw(CONF_PROMISC & ~31, ioaddr+SM_PTR);
1499 i = inw(ioaddr+SHADOW(CONF_PROMISC));
6aa20a22 1500 outw((dev->flags & IFF_PROMISC)?(i|1):(i & ~1),
1da177e4
LT		 1501 ioaddr+SHADOW(CONF_PROMISC));
1502 lp->was_promisc = dev->flags & IFF_PROMISC;
1503#if 0
1504 eexp_setup_filter(dev);
1505#endif
1506
1507 /* Write our hardware address */
1508 outw(CONF_HWADDR & ~31, ioaddr+SM_PTR);
1509 outw(((unsigned short *)dev->dev_addr)[0], ioaddr+SHADOW(CONF_HWADDR));
6aa20a22 1510 outw(((unsigned short *)dev->dev_addr)[1],
1da177e4
LT		 1511 ioaddr+SHADOW(CONF_HWADDR+2));
1512 outw(((unsigned short *)dev->dev_addr)[2],
1513 ioaddr+SHADOW(CONF_HWADDR+4));
1514
1515 eexp_hw_txinit(dev);
1516 eexp_hw_rxinit(dev);
1517
1518 outb(0,ioaddr+EEPROM_Ctrl);
1519 mdelay(5);
1520
1521 scb_command(dev, 0xf000);
1522 outb(0,ioaddr+SIGNAL_CA);
1523
1524 outw(0, ioaddr+SM_PTR);
1525
1526 {
1527 unsigned short rboguscount=50,rfailcount=5;
1528 while (inw(ioaddr+0x4000))
1529 {
1530 if (!--rboguscount)
1531 {
1532 printk(KERN_WARNING "%s: i82586 reset timed out, kicking...\n",
1533 dev->name);
1534 scb_command(dev, 0);
1535 outb(0,ioaddr+SIGNAL_CA);
1536 rboguscount = 100;
1537 if (!--rfailcount)
1538 {
1539 printk(KERN_WARNING "%s: i82586 not responding, giving up.\n",
1540 dev->name);
1541 return;
1542 }
1543 }
1544 }
1545 }
1546
1547 scb_wrcbl(dev, CONF_LINK);
1548 scb_command(dev, 0xf000|SCB_CUstart);
1549 outb(0,ioaddr+SIGNAL_CA);
1550
1551 {
1552 unsigned short iboguscount=50,ifailcount=5;
1553 while (!scb_status(dev))
1554 {
1555 if (!--iboguscount)
1556 {
1557 if (--ifailcount)
1558 {
1559 printk(KERN_WARNING "%s: i82586 initialization timed out, status %04x, cmd %04x\n",
1560 dev->name, scb_status(dev), scb_rdcmd(dev));
1561 scb_wrcbl(dev, CONF_LINK);
1562 scb_command(dev, 0xf000|SCB_CUstart);
1563 outb(0,ioaddr+SIGNAL_CA);
1564 iboguscount = 100;
1565 }
1566 else
1567 {
1568 printk(KERN_WARNING "%s: Failed to initialize i82586, giving up.\n",dev->name);
1569 return;
1570 }
1571 }
1572 }
1573 }
1574
1575 clear_loopback(dev);
1576 outb(SIRQ_en|irqrmap[dev->irq],ioaddr+SET_IRQ);
1577
1578 lp->init_time = jiffies;
1579#if NET_DEBUG > 6
1580 printk("%s: leaving eexp_hw_init586()\n", dev->name);
1581#endif
1582 return;
1583}
1584
1585static void eexp_setup_filter(struct net_device *dev)
1586{
1587 struct dev_mc_list *dmi = dev->mc_list;
1588 unsigned short ioaddr = dev->base_addr;
1589 int count = dev->mc_count;
1590 int i;
1591 if (count > 8) {
1592 printk(KERN_INFO "%s: too many multicast addresses (%d)\n",
1593 dev->name, count);
1594 count = 8;
1595 }
6aa20a22 1596
1da177e4
LT		 1597 outw(CONF_NR_MULTICAST & ~31, ioaddr+SM_PTR);
1598 outw(count, ioaddr+SHADOW(CONF_NR_MULTICAST));
1599 for (i = 0; i < count; i++) {
1600 unsigned short *data = (unsigned short *)dmi->dmi_addr;
1601 if (!dmi) {
1602 printk(KERN_INFO "%s: too few multicast addresses\n", dev->name);
1603 break;
1604 }
1605 if (dmi->dmi_addrlen != ETH_ALEN) {
1606 printk(KERN_INFO "%s: invalid multicast address length given.\n", dev->name);
1607 continue;
1608 }
1609 outw((CONF_MULTICAST+(6*i)) & ~31, ioaddr+SM_PTR);
1610 outw(data[0], ioaddr+SHADOW(CONF_MULTICAST+(6*i)));
1611 outw((CONF_MULTICAST+(6*i)+2) & ~31, ioaddr+SM_PTR);
1612 outw(data[1], ioaddr+SHADOW(CONF_MULTICAST+(6*i)+2));
1613 outw((CONF_MULTICAST+(6*i)+4) & ~31, ioaddr+SM_PTR);
1614 outw(data[2], ioaddr+SHADOW(CONF_MULTICAST+(6*i)+4));
1615 }
1616}
1617
1618/*
1619 * Set or clear the multicast filter for this adaptor.
1620 */
1621static void
1622eexp_set_multicast(struct net_device *dev)
1623{
1624 unsigned short ioaddr = dev->base_addr;
1625 struct net_local *lp = netdev_priv(dev);
1626 int kick = 0, i;
1627 if ((dev->flags & IFF_PROMISC) != lp->was_promisc) {
1628 outw(CONF_PROMISC & ~31, ioaddr+SM_PTR);
1629 i = inw(ioaddr+SHADOW(CONF_PROMISC));
1630 outw((dev->flags & IFF_PROMISC)?(i|1):(i & ~1),
1631 ioaddr+SHADOW(CONF_PROMISC));
1632 lp->was_promisc = dev->flags & IFF_PROMISC;
1633 kick = 1;
1634 }
1635 if (!(dev->flags & IFF_PROMISC)) {
1636 eexp_setup_filter(dev);
1637 if (lp->old_mc_count != dev->mc_count) {
1638 kick = 1;
1639 lp->old_mc_count = dev->mc_count;
1640 }
1641 }
1642 if (kick) {
1643 unsigned long oj;
1644 scb_command(dev, SCB_CUsuspend);
1645 outb(0, ioaddr+SIGNAL_CA);
1646 outb(0, ioaddr+SIGNAL_CA);
1647#if 0
1648 printk("%s: waiting for CU to go suspended\n", dev->name);
1649#endif
1650 oj = jiffies;
1651 while ((SCB_CUstat(scb_status(dev)) == 2) &&
1652 ((jiffies-oj) < 2000));
1653 if (SCB_CUstat(scb_status(dev)) == 2)
1654 printk("%s: warning, CU didn't stop\n", dev->name);
1655 lp->started &= ~(STARTED_CU);
1656 scb_wrcbl(dev, CONF_LINK);
1657 scb_command(dev, SCB_CUstart);
1658 outb(0, ioaddr+SIGNAL_CA);
1659 }
1660}
1661
1662
1663/*
1664 * MODULE stuff
1665 */
1666
1667#ifdef MODULE
1668
1669#define EEXP_MAX_CARDS 4 /* max number of cards to support */
1670
1671static struct net_device *dev_eexp[EEXP_MAX_CARDS];
1672static int irq[EEXP_MAX_CARDS];
1673static int io[EEXP_MAX_CARDS];
1674
1675module_param_array(io, int, NULL, 0);
1676module_param_array(irq, int, NULL, 0);
1677MODULE_PARM_DESC(io, "EtherExpress 16 I/O base address(es)");
1678MODULE_PARM_DESC(irq, "EtherExpress 16 IRQ number(s)");
1679MODULE_LICENSE("GPL");
1680
1681
1682/* Ideally the user would give us io=, irq= for every card. If any parameters
1683 * are specified, we verify and then use them. If no parameters are given, we
1684 * autoprobe for one card only.
1685 */
b1176b95 1686int __init init_module(void)
1da177e4
LT		 1687{
1688 struct net_device *dev;
1689 int this_dev, found = 0;
1690
1691 for (this_dev = 0; this_dev < EEXP_MAX_CARDS; this_dev++) {
1692 dev = alloc_etherdev(sizeof(struct net_local));
1693 dev->irq = irq[this_dev];
1694 dev->base_addr = io[this_dev];
1695 if (io[this_dev] == 0) {
1696 if (this_dev)
1697 break;
1698 printk(KERN_NOTICE "eexpress.c: Module autoprobe not recommended, give io=xx.\n");
1699 }
b1fc5505 1700 if (do_express_probe(dev) == 0) {
1da177e4
LT		 1701 dev_eexp[this_dev] = dev;
1702 found++;
1703 continue;
1704 }
1705 printk(KERN_WARNING "eexpress.c: Failed to register card at 0x%x.\n", io[this_dev]);
1706 free_netdev(dev);
1707 break;
1708 }
1709 if (found)
1710 return 0;
1711 return -ENXIO;
1712}
1713
afc8eb46 1714void __exit cleanup_module(void)
1da177e4
LT		 1715{
1716 int this_dev;
1717
1718 for (this_dev = 0; this_dev < EEXP_MAX_CARDS; this_dev++) {
1719 struct net_device *dev = dev_eexp[this_dev];
1720 if (dev) {
1721 unregister_netdev(dev);
1722 free_netdev(dev);
1723 }
1724 }
1725}
1726#endif
1727
1728/*
1729 * Local Variables:
1730 * c-file-style: "linux"
1731 * tab-width: 8
1732 * End:
1733 */
Linux kernel - Deliverables
This page took 0.315582 seconds and 5 git commands to generate.