Commit | Line | Data |
---|---|---|
86641094 | 1 | /* Intel(R) Ethernet Switch Host Interface Driver |
9de6a1a6 | 2 | * Copyright(c) 2013 - 2016 Intel Corporation. |
b6fec18f AD |
3 | * |
4 | * This program is free software; you can redistribute it and/or modify it | |
5 | * under the terms and conditions of the GNU General Public License, | |
6 | * version 2, as published by the Free Software Foundation. | |
7 | * | |
8 | * This program is distributed in the hope it will be useful, but WITHOUT | |
9 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | |
10 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | |
11 | * more details. | |
12 | * | |
13 | * The full GNU General Public License is included in this distribution in | |
14 | * the file called "COPYING". | |
15 | * | |
16 | * Contact Information: | |
17 | * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> | |
18 | * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 | |
19 | */ | |
20 | ||
21 | #include "fm10k_pf.h" | |
c2653865 | 22 | #include "fm10k_vf.h" |
b6fec18f AD |
23 | |
24 | /** | |
25 | * fm10k_reset_hw_pf - PF hardware reset | |
26 | * @hw: pointer to hardware structure | |
27 | * | |
28 | * This function should return the hardware to a state similar to the | |
29 | * one it is in after being powered on. | |
30 | **/ | |
31 | static s32 fm10k_reset_hw_pf(struct fm10k_hw *hw) | |
32 | { | |
33 | s32 err; | |
34 | u32 reg; | |
35 | u16 i; | |
36 | ||
37 | /* Disable interrupts */ | |
38 | fm10k_write_reg(hw, FM10K_EIMR, FM10K_EIMR_DISABLE(ALL)); | |
39 | ||
40 | /* Lock ITR2 reg 0 into itself and disable interrupt moderation */ | |
41 | fm10k_write_reg(hw, FM10K_ITR2(0), 0); | |
42 | fm10k_write_reg(hw, FM10K_INT_CTRL, 0); | |
43 | ||
44 | /* We assume here Tx and Rx queue 0 are owned by the PF */ | |
45 | ||
46 | /* Shut off VF access to their queues forcing them to queue 0 */ | |
47 | for (i = 0; i < FM10K_TQMAP_TABLE_SIZE; i++) { | |
48 | fm10k_write_reg(hw, FM10K_TQMAP(i), 0); | |
49 | fm10k_write_reg(hw, FM10K_RQMAP(i), 0); | |
50 | } | |
51 | ||
52 | /* shut down all rings */ | |
53 | err = fm10k_disable_queues_generic(hw, FM10K_MAX_QUEUES); | |
54 | if (err) | |
55 | return err; | |
56 | ||
57 | /* Verify that DMA is no longer active */ | |
58 | reg = fm10k_read_reg(hw, FM10K_DMA_CTRL); | |
59 | if (reg & (FM10K_DMA_CTRL_TX_ACTIVE | FM10K_DMA_CTRL_RX_ACTIVE)) | |
60 | return FM10K_ERR_DMA_PENDING; | |
61 | ||
ac981003 AD |
62 | /* verify the switch is ready for reset */ |
63 | reg = fm10k_read_reg(hw, FM10K_DMA_CTRL2); | |
64 | if (!(reg & FM10K_DMA_CTRL2_SWITCH_READY)) | |
65 | goto out; | |
66 | ||
b6fec18f AD |
67 | /* Inititate data path reset */ |
68 | reg |= FM10K_DMA_CTRL_DATAPATH_RESET; | |
69 | fm10k_write_reg(hw, FM10K_DMA_CTRL, reg); | |
70 | ||
71 | /* Flush write and allow 100us for reset to complete */ | |
72 | fm10k_write_flush(hw); | |
73 | udelay(FM10K_RESET_TIMEOUT); | |
74 | ||
75 | /* Verify we made it out of reset */ | |
76 | reg = fm10k_read_reg(hw, FM10K_IP); | |
77 | if (!(reg & FM10K_IP_NOTINRESET)) | |
78 | err = FM10K_ERR_RESET_FAILED; | |
79 | ||
ac981003 | 80 | out: |
b6fec18f AD |
81 | return err; |
82 | } | |
83 | ||
c2653865 AD |
84 | /** |
85 | * fm10k_is_ari_hierarchy_pf - Indicate ARI hierarchy support | |
86 | * @hw: pointer to hardware structure | |
87 | * | |
88 | * Looks at the ARI hierarchy bit to determine whether ARI is supported or not. | |
89 | **/ | |
90 | static bool fm10k_is_ari_hierarchy_pf(struct fm10k_hw *hw) | |
91 | { | |
92 | u16 sriov_ctrl = fm10k_read_pci_cfg_word(hw, FM10K_PCIE_SRIOV_CTRL); | |
93 | ||
94 | return !!(sriov_ctrl & FM10K_PCIE_SRIOV_CTRL_VFARI); | |
95 | } | |
96 | ||
b6fec18f AD |
97 | /** |
98 | * fm10k_init_hw_pf - PF hardware initialization | |
99 | * @hw: pointer to hardware structure | |
100 | * | |
101 | **/ | |
102 | static s32 fm10k_init_hw_pf(struct fm10k_hw *hw) | |
103 | { | |
104 | u32 dma_ctrl, txqctl; | |
105 | u16 i; | |
106 | ||
107 | /* Establish default VSI as valid */ | |
108 | fm10k_write_reg(hw, FM10K_DGLORTDEC(fm10k_dglort_default), 0); | |
109 | fm10k_write_reg(hw, FM10K_DGLORTMAP(fm10k_dglort_default), | |
110 | FM10K_DGLORTMAP_ANY); | |
111 | ||
112 | /* Invalidate all other GLORT entries */ | |
113 | for (i = 1; i < FM10K_DGLORT_COUNT; i++) | |
114 | fm10k_write_reg(hw, FM10K_DGLORTMAP(i), FM10K_DGLORTMAP_NONE); | |
115 | ||
116 | /* reset ITR2(0) to point to itself */ | |
117 | fm10k_write_reg(hw, FM10K_ITR2(0), 0); | |
118 | ||
119 | /* reset VF ITR2(0) to point to 0 avoid PF registers */ | |
120 | fm10k_write_reg(hw, FM10K_ITR2(FM10K_ITR_REG_COUNT_PF), 0); | |
121 | ||
122 | /* loop through all PF ITR2 registers pointing them to the previous */ | |
123 | for (i = 1; i < FM10K_ITR_REG_COUNT_PF; i++) | |
124 | fm10k_write_reg(hw, FM10K_ITR2(i), i - 1); | |
125 | ||
126 | /* Enable interrupt moderator if not already enabled */ | |
127 | fm10k_write_reg(hw, FM10K_INT_CTRL, FM10K_INT_CTRL_ENABLEMODERATOR); | |
128 | ||
129 | /* compute the default txqctl configuration */ | |
130 | txqctl = FM10K_TXQCTL_PF | FM10K_TXQCTL_UNLIMITED_BW | | |
131 | (hw->mac.default_vid << FM10K_TXQCTL_VID_SHIFT); | |
132 | ||
133 | for (i = 0; i < FM10K_MAX_QUEUES; i++) { | |
134 | /* configure rings for 256 Queue / 32 Descriptor cache mode */ | |
135 | fm10k_write_reg(hw, FM10K_TQDLOC(i), | |
136 | (i * FM10K_TQDLOC_BASE_32_DESC) | | |
137 | FM10K_TQDLOC_SIZE_32_DESC); | |
138 | fm10k_write_reg(hw, FM10K_TXQCTL(i), txqctl); | |
139 | ||
140 | /* configure rings to provide TPH processing hints */ | |
141 | fm10k_write_reg(hw, FM10K_TPH_TXCTRL(i), | |
142 | FM10K_TPH_TXCTRL_DESC_TPHEN | | |
143 | FM10K_TPH_TXCTRL_DESC_RROEN | | |
144 | FM10K_TPH_TXCTRL_DESC_WROEN | | |
145 | FM10K_TPH_TXCTRL_DATA_RROEN); | |
146 | fm10k_write_reg(hw, FM10K_TPH_RXCTRL(i), | |
147 | FM10K_TPH_RXCTRL_DESC_TPHEN | | |
148 | FM10K_TPH_RXCTRL_DESC_RROEN | | |
149 | FM10K_TPH_RXCTRL_DATA_WROEN | | |
150 | FM10K_TPH_RXCTRL_HDR_WROEN); | |
151 | } | |
152 | ||
20076fa1 JK |
153 | /* set max hold interval to align with 1.024 usec in all modes and |
154 | * store ITR scale | |
155 | */ | |
b6fec18f AD |
156 | switch (hw->bus.speed) { |
157 | case fm10k_bus_speed_2500: | |
158 | dma_ctrl = FM10K_DMA_CTRL_MAX_HOLD_1US_GEN1; | |
20076fa1 | 159 | hw->mac.itr_scale = FM10K_TDLEN_ITR_SCALE_GEN1; |
b6fec18f AD |
160 | break; |
161 | case fm10k_bus_speed_5000: | |
162 | dma_ctrl = FM10K_DMA_CTRL_MAX_HOLD_1US_GEN2; | |
20076fa1 | 163 | hw->mac.itr_scale = FM10K_TDLEN_ITR_SCALE_GEN2; |
b6fec18f AD |
164 | break; |
165 | case fm10k_bus_speed_8000: | |
166 | dma_ctrl = FM10K_DMA_CTRL_MAX_HOLD_1US_GEN3; | |
20076fa1 | 167 | hw->mac.itr_scale = FM10K_TDLEN_ITR_SCALE_GEN3; |
b6fec18f AD |
168 | break; |
169 | default: | |
170 | dma_ctrl = 0; | |
20076fa1 JK |
171 | /* just in case, assume Gen3 ITR scale */ |
172 | hw->mac.itr_scale = FM10K_TDLEN_ITR_SCALE_GEN3; | |
b6fec18f AD |
173 | break; |
174 | } | |
175 | ||
176 | /* Configure TSO flags */ | |
177 | fm10k_write_reg(hw, FM10K_DTXTCPFLGL, FM10K_TSO_FLAGS_LOW); | |
178 | fm10k_write_reg(hw, FM10K_DTXTCPFLGH, FM10K_TSO_FLAGS_HI); | |
179 | ||
180 | /* Enable DMA engine | |
181 | * Set Rx Descriptor size to 32 | |
182 | * Set Minimum MSS to 64 | |
183 | * Set Maximum number of Rx queues to 256 / 32 Descriptor | |
184 | */ | |
185 | dma_ctrl |= FM10K_DMA_CTRL_TX_ENABLE | FM10K_DMA_CTRL_RX_ENABLE | | |
186 | FM10K_DMA_CTRL_RX_DESC_SIZE | FM10K_DMA_CTRL_MINMSS_64 | | |
187 | FM10K_DMA_CTRL_32_DESC; | |
188 | ||
189 | fm10k_write_reg(hw, FM10K_DMA_CTRL, dma_ctrl); | |
190 | ||
191 | /* record maximum queue count, we limit ourselves to 128 */ | |
192 | hw->mac.max_queues = FM10K_MAX_QUEUES_PF; | |
193 | ||
c2653865 AD |
194 | /* We support either 64 VFs or 7 VFs depending on if we have ARI */ |
195 | hw->iov.total_vfs = fm10k_is_ari_hierarchy_pf(hw) ? 64 : 7; | |
196 | ||
b6fec18f AD |
197 | return 0; |
198 | } | |
199 | ||
401b5383 AD |
200 | /** |
201 | * fm10k_update_vlan_pf - Update status of VLAN ID in VLAN filter table | |
202 | * @hw: pointer to hardware structure | |
203 | * @vid: VLAN ID to add to table | |
204 | * @vsi: Index indicating VF ID or PF ID in table | |
205 | * @set: Indicates if this is a set or clear operation | |
206 | * | |
207 | * This function adds or removes the corresponding VLAN ID from the VLAN | |
208 | * filter table for the corresponding function. In addition to the | |
209 | * standard set/clear that supports one bit a multi-bit write is | |
210 | * supported to set 64 bits at a time. | |
211 | **/ | |
212 | static s32 fm10k_update_vlan_pf(struct fm10k_hw *hw, u32 vid, u8 vsi, bool set) | |
213 | { | |
214 | u32 vlan_table, reg, mask, bit, len; | |
215 | ||
216 | /* verify the VSI index is valid */ | |
217 | if (vsi > FM10K_VLAN_TABLE_VSI_MAX) | |
218 | return FM10K_ERR_PARAM; | |
219 | ||
220 | /* VLAN multi-bit write: | |
221 | * The multi-bit write has several parts to it. | |
d057d9a9 JK |
222 | * 24 16 8 0 |
223 | * 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 | |
401b5383 AD |
224 | * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ |
225 | * | RSVD0 | Length |C|RSVD0| VLAN ID | | |
226 | * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | |
227 | * | |
228 | * VLAN ID: Vlan Starting value | |
229 | * RSVD0: Reserved section, must be 0 | |
230 | * C: Flag field, 0 is set, 1 is clear (Used in VF VLAN message) | |
231 | * Length: Number of times to repeat the bit being set | |
232 | */ | |
233 | len = vid >> 16; | |
234 | vid = (vid << 17) >> 17; | |
235 | ||
236 | /* verify the reserved 0 fields are 0 */ | |
eca32047 | 237 | if (len >= FM10K_VLAN_TABLE_VID_MAX || vid >= FM10K_VLAN_TABLE_VID_MAX) |
401b5383 AD |
238 | return FM10K_ERR_PARAM; |
239 | ||
240 | /* Loop through the table updating all required VLANs */ | |
241 | for (reg = FM10K_VLAN_TABLE(vsi, vid / 32), bit = vid % 32; | |
242 | len < FM10K_VLAN_TABLE_VID_MAX; | |
243 | len -= 32 - bit, reg++, bit = 0) { | |
244 | /* record the initial state of the register */ | |
245 | vlan_table = fm10k_read_reg(hw, reg); | |
246 | ||
247 | /* truncate mask if we are at the start or end of the run */ | |
248 | mask = (~(u32)0 >> ((len < 31) ? 31 - len : 0)) << bit; | |
249 | ||
250 | /* make necessary modifications to the register */ | |
251 | mask &= set ? ~vlan_table : vlan_table; | |
252 | if (mask) | |
253 | fm10k_write_reg(hw, reg, vlan_table ^ mask); | |
254 | } | |
255 | ||
256 | return 0; | |
257 | } | |
258 | ||
b6fec18f AD |
259 | /** |
260 | * fm10k_read_mac_addr_pf - Read device MAC address | |
261 | * @hw: pointer to the HW structure | |
262 | * | |
263 | * Reads the device MAC address from the SM_AREA and stores the value. | |
264 | **/ | |
265 | static s32 fm10k_read_mac_addr_pf(struct fm10k_hw *hw) | |
266 | { | |
267 | u8 perm_addr[ETH_ALEN]; | |
268 | u32 serial_num; | |
b6fec18f AD |
269 | |
270 | serial_num = fm10k_read_reg(hw, FM10K_SM_AREA(1)); | |
271 | ||
272 | /* last byte should be all 1's */ | |
273 | if ((~serial_num) << 24) | |
274 | return FM10K_ERR_INVALID_MAC_ADDR; | |
275 | ||
276 | perm_addr[0] = (u8)(serial_num >> 24); | |
277 | perm_addr[1] = (u8)(serial_num >> 16); | |
278 | perm_addr[2] = (u8)(serial_num >> 8); | |
279 | ||
280 | serial_num = fm10k_read_reg(hw, FM10K_SM_AREA(0)); | |
281 | ||
282 | /* first byte should be all 1's */ | |
283 | if ((~serial_num) >> 24) | |
284 | return FM10K_ERR_INVALID_MAC_ADDR; | |
285 | ||
286 | perm_addr[3] = (u8)(serial_num >> 16); | |
287 | perm_addr[4] = (u8)(serial_num >> 8); | |
288 | perm_addr[5] = (u8)(serial_num); | |
289 | ||
f0cf5c98 JK |
290 | ether_addr_copy(hw->mac.perm_addr, perm_addr); |
291 | ether_addr_copy(hw->mac.addr, perm_addr); | |
b6fec18f AD |
292 | |
293 | return 0; | |
294 | } | |
295 | ||
401b5383 AD |
296 | /** |
297 | * fm10k_glort_valid_pf - Validate that the provided glort is valid | |
298 | * @hw: pointer to the HW structure | |
299 | * @glort: base glort to be validated | |
300 | * | |
301 | * This function will return an error if the provided glort is invalid | |
302 | **/ | |
303 | bool fm10k_glort_valid_pf(struct fm10k_hw *hw, u16 glort) | |
304 | { | |
305 | glort &= hw->mac.dglort_map >> FM10K_DGLORTMAP_MASK_SHIFT; | |
306 | ||
307 | return glort == (hw->mac.dglort_map & FM10K_DGLORTMAP_NONE); | |
308 | } | |
309 | ||
310 | /** | |
eca32047 | 311 | * fm10k_update_xc_addr_pf - Update device addresses |
401b5383 AD |
312 | * @hw: pointer to the HW structure |
313 | * @glort: base resource tag for this request | |
314 | * @mac: MAC address to add/remove from table | |
315 | * @vid: VLAN ID to add/remove from table | |
316 | * @add: Indicates if this is an add or remove operation | |
317 | * @flags: flags field to indicate add and secure | |
318 | * | |
319 | * This function generates a message to the Switch API requesting | |
320 | * that the given logical port add/remove the given L2 MAC/VLAN address. | |
321 | **/ | |
322 | static s32 fm10k_update_xc_addr_pf(struct fm10k_hw *hw, u16 glort, | |
323 | const u8 *mac, u16 vid, bool add, u8 flags) | |
324 | { | |
325 | struct fm10k_mbx_info *mbx = &hw->mbx; | |
326 | struct fm10k_mac_update mac_update; | |
327 | u32 msg[5]; | |
328 | ||
b32d15b9 JK |
329 | /* clear set bit from VLAN ID */ |
330 | vid &= ~FM10K_VLAN_CLEAR; | |
331 | ||
aa502b4a | 332 | /* if glort or VLAN are not valid return error */ |
33a44c28 | 333 | if (!fm10k_glort_valid_pf(hw, glort) || vid >= FM10K_VLAN_TABLE_VID_MAX) |
401b5383 AD |
334 | return FM10K_ERR_PARAM; |
335 | ||
401b5383 AD |
336 | /* record fields */ |
337 | mac_update.mac_lower = cpu_to_le32(((u32)mac[2] << 24) | | |
338 | ((u32)mac[3] << 16) | | |
339 | ((u32)mac[4] << 8) | | |
340 | ((u32)mac[5])); | |
9d4955b4 JK |
341 | mac_update.mac_upper = cpu_to_le16(((u16)mac[0] << 8) | |
342 | ((u16)mac[1])); | |
401b5383 AD |
343 | mac_update.vlan = cpu_to_le16(vid); |
344 | mac_update.glort = cpu_to_le16(glort); | |
345 | mac_update.action = add ? 0 : 1; | |
346 | mac_update.flags = flags; | |
347 | ||
348 | /* populate mac_update fields */ | |
349 | fm10k_tlv_msg_init(msg, FM10K_PF_MSG_ID_UPDATE_MAC_FWD_RULE); | |
350 | fm10k_tlv_attr_put_le_struct(msg, FM10K_PF_ATTR_ID_MAC_UPDATE, | |
351 | &mac_update, sizeof(mac_update)); | |
352 | ||
353 | /* load onto outgoing mailbox */ | |
354 | return mbx->ops.enqueue_tx(hw, mbx, msg); | |
355 | } | |
356 | ||
357 | /** | |
eca32047 | 358 | * fm10k_update_uc_addr_pf - Update device unicast addresses |
401b5383 AD |
359 | * @hw: pointer to the HW structure |
360 | * @glort: base resource tag for this request | |
361 | * @mac: MAC address to add/remove from table | |
362 | * @vid: VLAN ID to add/remove from table | |
363 | * @add: Indicates if this is an add or remove operation | |
364 | * @flags: flags field to indicate add and secure | |
365 | * | |
366 | * This function is used to add or remove unicast addresses for | |
367 | * the PF. | |
368 | **/ | |
369 | static s32 fm10k_update_uc_addr_pf(struct fm10k_hw *hw, u16 glort, | |
370 | const u8 *mac, u16 vid, bool add, u8 flags) | |
371 | { | |
372 | /* verify MAC address is valid */ | |
373 | if (!is_valid_ether_addr(mac)) | |
374 | return FM10K_ERR_PARAM; | |
375 | ||
376 | return fm10k_update_xc_addr_pf(hw, glort, mac, vid, add, flags); | |
377 | } | |
378 | ||
379 | /** | |
380 | * fm10k_update_mc_addr_pf - Update device multicast addresses | |
381 | * @hw: pointer to the HW structure | |
382 | * @glort: base resource tag for this request | |
383 | * @mac: MAC address to add/remove from table | |
384 | * @vid: VLAN ID to add/remove from table | |
385 | * @add: Indicates if this is an add or remove operation | |
386 | * | |
387 | * This function is used to add or remove multicast MAC addresses for | |
388 | * the PF. | |
389 | **/ | |
390 | static s32 fm10k_update_mc_addr_pf(struct fm10k_hw *hw, u16 glort, | |
391 | const u8 *mac, u16 vid, bool add) | |
392 | { | |
393 | /* verify multicast address is valid */ | |
394 | if (!is_multicast_ether_addr(mac)) | |
395 | return FM10K_ERR_PARAM; | |
396 | ||
397 | return fm10k_update_xc_addr_pf(hw, glort, mac, vid, add, 0); | |
398 | } | |
399 | ||
400 | /** | |
401 | * fm10k_update_xcast_mode_pf - Request update of multicast mode | |
402 | * @hw: pointer to hardware structure | |
403 | * @glort: base resource tag for this request | |
404 | * @mode: integer value indicating mode being requested | |
405 | * | |
406 | * This function will attempt to request a higher mode for the port | |
407 | * so that it can enable either multicast, multicast promiscuous, or | |
408 | * promiscuous mode of operation. | |
409 | **/ | |
410 | static s32 fm10k_update_xcast_mode_pf(struct fm10k_hw *hw, u16 glort, u8 mode) | |
411 | { | |
412 | struct fm10k_mbx_info *mbx = &hw->mbx; | |
413 | u32 msg[3], xcast_mode; | |
414 | ||
415 | if (mode > FM10K_XCAST_MODE_NONE) | |
416 | return FM10K_ERR_PARAM; | |
a4fcad65 | 417 | |
401b5383 AD |
418 | /* if glort is not valid return error */ |
419 | if (!fm10k_glort_valid_pf(hw, glort)) | |
420 | return FM10K_ERR_PARAM; | |
421 | ||
422 | /* write xcast mode as a single u32 value, | |
423 | * lower 16 bits: glort | |
424 | * upper 16 bits: mode | |
425 | */ | |
426 | xcast_mode = ((u32)mode << 16) | glort; | |
427 | ||
428 | /* generate message requesting to change xcast mode */ | |
429 | fm10k_tlv_msg_init(msg, FM10K_PF_MSG_ID_XCAST_MODES); | |
430 | fm10k_tlv_attr_put_u32(msg, FM10K_PF_ATTR_ID_XCAST_MODE, xcast_mode); | |
431 | ||
432 | /* load onto outgoing mailbox */ | |
433 | return mbx->ops.enqueue_tx(hw, mbx, msg); | |
434 | } | |
435 | ||
436 | /** | |
437 | * fm10k_update_int_moderator_pf - Update interrupt moderator linked list | |
438 | * @hw: pointer to hardware structure | |
439 | * | |
440 | * This function walks through the MSI-X vector table to determine the | |
441 | * number of active interrupts and based on that information updates the | |
442 | * interrupt moderator linked list. | |
443 | **/ | |
444 | static void fm10k_update_int_moderator_pf(struct fm10k_hw *hw) | |
445 | { | |
446 | u32 i; | |
447 | ||
448 | /* Disable interrupt moderator */ | |
449 | fm10k_write_reg(hw, FM10K_INT_CTRL, 0); | |
450 | ||
451 | /* loop through PF from last to first looking enabled vectors */ | |
452 | for (i = FM10K_ITR_REG_COUNT_PF - 1; i; i--) { | |
453 | if (!fm10k_read_reg(hw, FM10K_MSIX_VECTOR_MASK(i))) | |
454 | break; | |
455 | } | |
456 | ||
eca32047 | 457 | /* always reset VFITR2[0] to point to last enabled PF vector */ |
401b5383 AD |
458 | fm10k_write_reg(hw, FM10K_ITR2(FM10K_ITR_REG_COUNT_PF), i); |
459 | ||
460 | /* reset ITR2[0] to point to last enabled PF vector */ | |
c2653865 AD |
461 | if (!hw->iov.num_vfs) |
462 | fm10k_write_reg(hw, FM10K_ITR2(0), i); | |
401b5383 AD |
463 | |
464 | /* Enable interrupt moderator */ | |
465 | fm10k_write_reg(hw, FM10K_INT_CTRL, FM10K_INT_CTRL_ENABLEMODERATOR); | |
466 | } | |
467 | ||
468 | /** | |
469 | * fm10k_update_lport_state_pf - Notify the switch of a change in port state | |
470 | * @hw: pointer to the HW structure | |
471 | * @glort: base resource tag for this request | |
472 | * @count: number of logical ports being updated | |
473 | * @enable: boolean value indicating enable or disable | |
474 | * | |
475 | * This function is used to add/remove a logical port from the switch. | |
476 | **/ | |
477 | static s32 fm10k_update_lport_state_pf(struct fm10k_hw *hw, u16 glort, | |
478 | u16 count, bool enable) | |
479 | { | |
480 | struct fm10k_mbx_info *mbx = &hw->mbx; | |
481 | u32 msg[3], lport_msg; | |
482 | ||
483 | /* do nothing if we are being asked to create or destroy 0 ports */ | |
484 | if (!count) | |
485 | return 0; | |
486 | ||
487 | /* if glort is not valid return error */ | |
488 | if (!fm10k_glort_valid_pf(hw, glort)) | |
489 | return FM10K_ERR_PARAM; | |
490 | ||
11ec36a9 NMK |
491 | /* reset multicast mode if deleting lport */ |
492 | if (!enable) | |
493 | fm10k_update_xcast_mode_pf(hw, glort, FM10K_XCAST_MODE_NONE); | |
494 | ||
401b5383 AD |
495 | /* construct the lport message from the 2 pieces of data we have */ |
496 | lport_msg = ((u32)count << 16) | glort; | |
497 | ||
498 | /* generate lport create/delete message */ | |
499 | fm10k_tlv_msg_init(msg, enable ? FM10K_PF_MSG_ID_LPORT_CREATE : | |
500 | FM10K_PF_MSG_ID_LPORT_DELETE); | |
501 | fm10k_tlv_attr_put_u32(msg, FM10K_PF_ATTR_ID_PORT, lport_msg); | |
502 | ||
503 | /* load onto outgoing mailbox */ | |
504 | return mbx->ops.enqueue_tx(hw, mbx, msg); | |
505 | } | |
506 | ||
507 | /** | |
508 | * fm10k_configure_dglort_map_pf - Configures GLORT entry and queues | |
509 | * @hw: pointer to hardware structure | |
510 | * @dglort: pointer to dglort configuration structure | |
511 | * | |
512 | * Reads the configuration structure contained in dglort_cfg and uses | |
513 | * that information to then populate a DGLORTMAP/DEC entry and the queues | |
514 | * to which it has been assigned. | |
515 | **/ | |
516 | static s32 fm10k_configure_dglort_map_pf(struct fm10k_hw *hw, | |
517 | struct fm10k_dglort_cfg *dglort) | |
518 | { | |
519 | u16 glort, queue_count, vsi_count, pc_count; | |
520 | u16 vsi, queue, pc, q_idx; | |
521 | u32 txqctl, dglortdec, dglortmap; | |
522 | ||
523 | /* verify the dglort pointer */ | |
524 | if (!dglort) | |
525 | return FM10K_ERR_PARAM; | |
526 | ||
527 | /* verify the dglort values */ | |
528 | if ((dglort->idx > 7) || (dglort->rss_l > 7) || (dglort->pc_l > 3) || | |
529 | (dglort->vsi_l > 6) || (dglort->vsi_b > 64) || | |
530 | (dglort->queue_l > 8) || (dglort->queue_b >= 256)) | |
531 | return FM10K_ERR_PARAM; | |
532 | ||
533 | /* determine count of VSIs and queues */ | |
fcdb0a99 BA |
534 | queue_count = BIT(dglort->rss_l + dglort->pc_l); |
535 | vsi_count = BIT(dglort->vsi_l + dglort->queue_l); | |
401b5383 AD |
536 | glort = dglort->glort; |
537 | q_idx = dglort->queue_b; | |
538 | ||
539 | /* configure SGLORT for queues */ | |
540 | for (vsi = 0; vsi < vsi_count; vsi++, glort++) { | |
541 | for (queue = 0; queue < queue_count; queue++, q_idx++) { | |
542 | if (q_idx >= FM10K_MAX_QUEUES) | |
543 | break; | |
544 | ||
545 | fm10k_write_reg(hw, FM10K_TX_SGLORT(q_idx), glort); | |
546 | fm10k_write_reg(hw, FM10K_RX_SGLORT(q_idx), glort); | |
547 | } | |
548 | } | |
549 | ||
550 | /* determine count of PCs and queues */ | |
fcdb0a99 BA |
551 | queue_count = BIT(dglort->queue_l + dglort->rss_l + dglort->vsi_l); |
552 | pc_count = BIT(dglort->pc_l); | |
401b5383 AD |
553 | |
554 | /* configure PC for Tx queues */ | |
555 | for (pc = 0; pc < pc_count; pc++) { | |
556 | q_idx = pc + dglort->queue_b; | |
557 | for (queue = 0; queue < queue_count; queue++) { | |
558 | if (q_idx >= FM10K_MAX_QUEUES) | |
559 | break; | |
560 | ||
561 | txqctl = fm10k_read_reg(hw, FM10K_TXQCTL(q_idx)); | |
562 | txqctl &= ~FM10K_TXQCTL_PC_MASK; | |
563 | txqctl |= pc << FM10K_TXQCTL_PC_SHIFT; | |
564 | fm10k_write_reg(hw, FM10K_TXQCTL(q_idx), txqctl); | |
565 | ||
566 | q_idx += pc_count; | |
567 | } | |
568 | } | |
569 | ||
570 | /* configure DGLORTDEC */ | |
571 | dglortdec = ((u32)(dglort->rss_l) << FM10K_DGLORTDEC_RSSLENGTH_SHIFT) | | |
572 | ((u32)(dglort->queue_b) << FM10K_DGLORTDEC_QBASE_SHIFT) | | |
573 | ((u32)(dglort->pc_l) << FM10K_DGLORTDEC_PCLENGTH_SHIFT) | | |
574 | ((u32)(dglort->vsi_b) << FM10K_DGLORTDEC_VSIBASE_SHIFT) | | |
575 | ((u32)(dglort->vsi_l) << FM10K_DGLORTDEC_VSILENGTH_SHIFT) | | |
576 | ((u32)(dglort->queue_l)); | |
577 | if (dglort->inner_rss) | |
578 | dglortdec |= FM10K_DGLORTDEC_INNERRSS_ENABLE; | |
579 | ||
580 | /* configure DGLORTMAP */ | |
581 | dglortmap = (dglort->idx == fm10k_dglort_default) ? | |
582 | FM10K_DGLORTMAP_ANY : FM10K_DGLORTMAP_ZERO; | |
583 | dglortmap <<= dglort->vsi_l + dglort->queue_l + dglort->shared_l; | |
584 | dglortmap |= dglort->glort; | |
585 | ||
586 | /* write values to hardware */ | |
587 | fm10k_write_reg(hw, FM10K_DGLORTDEC(dglort->idx), dglortdec); | |
588 | fm10k_write_reg(hw, FM10K_DGLORTMAP(dglort->idx), dglortmap); | |
589 | ||
590 | return 0; | |
591 | } | |
592 | ||
c2653865 AD |
593 | u16 fm10k_queues_per_pool(struct fm10k_hw *hw) |
594 | { | |
595 | u16 num_pools = hw->iov.num_pools; | |
596 | ||
597 | return (num_pools > 32) ? 2 : (num_pools > 16) ? 4 : (num_pools > 8) ? | |
598 | 8 : FM10K_MAX_QUEUES_POOL; | |
599 | } | |
600 | ||
601 | u16 fm10k_vf_queue_index(struct fm10k_hw *hw, u16 vf_idx) | |
602 | { | |
603 | u16 num_vfs = hw->iov.num_vfs; | |
604 | u16 vf_q_idx = FM10K_MAX_QUEUES; | |
605 | ||
606 | vf_q_idx -= fm10k_queues_per_pool(hw) * (num_vfs - vf_idx); | |
607 | ||
608 | return vf_q_idx; | |
609 | } | |
610 | ||
611 | static u16 fm10k_vectors_per_pool(struct fm10k_hw *hw) | |
612 | { | |
613 | u16 num_pools = hw->iov.num_pools; | |
614 | ||
615 | return (num_pools > 32) ? 8 : (num_pools > 16) ? 16 : | |
616 | FM10K_MAX_VECTORS_POOL; | |
617 | } | |
618 | ||
619 | static u16 fm10k_vf_vector_index(struct fm10k_hw *hw, u16 vf_idx) | |
620 | { | |
621 | u16 vf_v_idx = FM10K_MAX_VECTORS_PF; | |
622 | ||
623 | vf_v_idx += fm10k_vectors_per_pool(hw) * vf_idx; | |
624 | ||
625 | return vf_v_idx; | |
626 | } | |
627 | ||
628 | /** | |
629 | * fm10k_iov_assign_resources_pf - Assign pool resources for virtualization | |
630 | * @hw: pointer to the HW structure | |
631 | * @num_vfs: number of VFs to be allocated | |
632 | * @num_pools: number of virtualization pools to be allocated | |
633 | * | |
634 | * Allocates queues and traffic classes to virtualization entities to prepare | |
635 | * the PF for SR-IOV and VMDq | |
636 | **/ | |
637 | static s32 fm10k_iov_assign_resources_pf(struct fm10k_hw *hw, u16 num_vfs, | |
638 | u16 num_pools) | |
639 | { | |
640 | u16 qmap_stride, qpp, vpp, vf_q_idx, vf_q_idx0, qmap_idx; | |
641 | u32 vid = hw->mac.default_vid << FM10K_TXQCTL_VID_SHIFT; | |
642 | int i, j; | |
643 | ||
644 | /* hardware only supports up to 64 pools */ | |
645 | if (num_pools > 64) | |
646 | return FM10K_ERR_PARAM; | |
647 | ||
648 | /* the number of VFs cannot exceed the number of pools */ | |
649 | if ((num_vfs > num_pools) || (num_vfs > hw->iov.total_vfs)) | |
650 | return FM10K_ERR_PARAM; | |
651 | ||
652 | /* record number of virtualization entities */ | |
653 | hw->iov.num_vfs = num_vfs; | |
654 | hw->iov.num_pools = num_pools; | |
655 | ||
656 | /* determine qmap offsets and counts */ | |
657 | qmap_stride = (num_vfs > 8) ? 32 : 256; | |
658 | qpp = fm10k_queues_per_pool(hw); | |
659 | vpp = fm10k_vectors_per_pool(hw); | |
660 | ||
661 | /* calculate starting index for queues */ | |
662 | vf_q_idx = fm10k_vf_queue_index(hw, 0); | |
663 | qmap_idx = 0; | |
664 | ||
665 | /* establish TCs with -1 credits and no quanta to prevent transmit */ | |
666 | for (i = 0; i < num_vfs; i++) { | |
667 | fm10k_write_reg(hw, FM10K_TC_MAXCREDIT(i), 0); | |
668 | fm10k_write_reg(hw, FM10K_TC_RATE(i), 0); | |
669 | fm10k_write_reg(hw, FM10K_TC_CREDIT(i), | |
670 | FM10K_TC_CREDIT_CREDIT_MASK); | |
671 | } | |
672 | ||
673 | /* zero out all mbmem registers */ | |
674 | for (i = FM10K_VFMBMEM_LEN * num_vfs; i--;) | |
675 | fm10k_write_reg(hw, FM10K_MBMEM(i), 0); | |
676 | ||
677 | /* clear event notification of VF FLR */ | |
678 | fm10k_write_reg(hw, FM10K_PFVFLREC(0), ~0); | |
679 | fm10k_write_reg(hw, FM10K_PFVFLREC(1), ~0); | |
680 | ||
681 | /* loop through unallocated rings assigning them back to PF */ | |
682 | for (i = FM10K_MAX_QUEUES_PF; i < vf_q_idx; i++) { | |
683 | fm10k_write_reg(hw, FM10K_TXDCTL(i), 0); | |
ded8b20d JK |
684 | fm10k_write_reg(hw, FM10K_TXQCTL(i), FM10K_TXQCTL_PF | |
685 | FM10K_TXQCTL_UNLIMITED_BW | vid); | |
c2653865 AD |
686 | fm10k_write_reg(hw, FM10K_RXQCTL(i), FM10K_RXQCTL_PF); |
687 | } | |
688 | ||
689 | /* PF should have already updated VFITR2[0] */ | |
690 | ||
691 | /* update all ITR registers to flow to VFITR2[0] */ | |
692 | for (i = FM10K_ITR_REG_COUNT_PF + 1; i < FM10K_ITR_REG_COUNT; i++) { | |
693 | if (!(i & (vpp - 1))) | |
694 | fm10k_write_reg(hw, FM10K_ITR2(i), i - vpp); | |
695 | else | |
696 | fm10k_write_reg(hw, FM10K_ITR2(i), i - 1); | |
697 | } | |
698 | ||
699 | /* update PF ITR2[0] to reference the last vector */ | |
700 | fm10k_write_reg(hw, FM10K_ITR2(0), | |
701 | fm10k_vf_vector_index(hw, num_vfs - 1)); | |
702 | ||
703 | /* loop through rings populating rings and TCs */ | |
704 | for (i = 0; i < num_vfs; i++) { | |
705 | /* record index for VF queue 0 for use in end of loop */ | |
706 | vf_q_idx0 = vf_q_idx; | |
707 | ||
708 | for (j = 0; j < qpp; j++, qmap_idx++, vf_q_idx++) { | |
709 | /* assign VF and locked TC to queues */ | |
710 | fm10k_write_reg(hw, FM10K_TXDCTL(vf_q_idx), 0); | |
711 | fm10k_write_reg(hw, FM10K_TXQCTL(vf_q_idx), | |
712 | (i << FM10K_TXQCTL_TC_SHIFT) | i | | |
713 | FM10K_TXQCTL_VF | vid); | |
714 | fm10k_write_reg(hw, FM10K_RXDCTL(vf_q_idx), | |
715 | FM10K_RXDCTL_WRITE_BACK_MIN_DELAY | | |
716 | FM10K_RXDCTL_DROP_ON_EMPTY); | |
717 | fm10k_write_reg(hw, FM10K_RXQCTL(vf_q_idx), | |
1aab144c BA |
718 | (i << FM10K_RXQCTL_VF_SHIFT) | |
719 | FM10K_RXQCTL_VF); | |
c2653865 AD |
720 | |
721 | /* map queue pair to VF */ | |
722 | fm10k_write_reg(hw, FM10K_TQMAP(qmap_idx), vf_q_idx); | |
723 | fm10k_write_reg(hw, FM10K_RQMAP(qmap_idx), vf_q_idx); | |
724 | } | |
725 | ||
726 | /* repeat the first ring for all of the remaining VF rings */ | |
727 | for (; j < qmap_stride; j++, qmap_idx++) { | |
728 | fm10k_write_reg(hw, FM10K_TQMAP(qmap_idx), vf_q_idx0); | |
729 | fm10k_write_reg(hw, FM10K_RQMAP(qmap_idx), vf_q_idx0); | |
730 | } | |
731 | } | |
732 | ||
733 | /* loop through remaining indexes assigning all to queue 0 */ | |
734 | while (qmap_idx < FM10K_TQMAP_TABLE_SIZE) { | |
735 | fm10k_write_reg(hw, FM10K_TQMAP(qmap_idx), 0); | |
736 | fm10k_write_reg(hw, FM10K_RQMAP(qmap_idx), 0); | |
737 | qmap_idx++; | |
738 | } | |
739 | ||
740 | return 0; | |
741 | } | |
742 | ||
743 | /** | |
744 | * fm10k_iov_configure_tc_pf - Configure the shaping group for VF | |
745 | * @hw: pointer to the HW structure | |
746 | * @vf_idx: index of VF receiving GLORT | |
747 | * @rate: Rate indicated in Mb/s | |
748 | * | |
749 | * Configured the TC for a given VF to allow only up to a given number | |
750 | * of Mb/s of outgoing Tx throughput. | |
751 | **/ | |
752 | static s32 fm10k_iov_configure_tc_pf(struct fm10k_hw *hw, u16 vf_idx, int rate) | |
753 | { | |
754 | /* configure defaults */ | |
755 | u32 interval = FM10K_TC_RATE_INTERVAL_4US_GEN3; | |
756 | u32 tc_rate = FM10K_TC_RATE_QUANTA_MASK; | |
757 | ||
758 | /* verify vf is in range */ | |
759 | if (vf_idx >= hw->iov.num_vfs) | |
760 | return FM10K_ERR_PARAM; | |
761 | ||
762 | /* set interval to align with 4.096 usec in all modes */ | |
763 | switch (hw->bus.speed) { | |
764 | case fm10k_bus_speed_2500: | |
765 | interval = FM10K_TC_RATE_INTERVAL_4US_GEN1; | |
766 | break; | |
767 | case fm10k_bus_speed_5000: | |
768 | interval = FM10K_TC_RATE_INTERVAL_4US_GEN2; | |
769 | break; | |
770 | default: | |
771 | break; | |
772 | } | |
773 | ||
774 | if (rate) { | |
775 | if (rate > FM10K_VF_TC_MAX || rate < FM10K_VF_TC_MIN) | |
776 | return FM10K_ERR_PARAM; | |
777 | ||
778 | /* The quanta is measured in Bytes per 4.096 or 8.192 usec | |
779 | * The rate is provided in Mbits per second | |
780 | * To tralslate from rate to quanta we need to multiply the | |
781 | * rate by 8.192 usec and divide by 8 bits/byte. To avoid | |
782 | * dealing with floating point we can round the values up | |
783 | * to the nearest whole number ratio which gives us 128 / 125. | |
784 | */ | |
785 | tc_rate = (rate * 128) / 125; | |
786 | ||
787 | /* try to keep the rate limiting accurate by increasing | |
788 | * the number of credits and interval for rates less than 4Gb/s | |
789 | */ | |
790 | if (rate < 4000) | |
791 | interval <<= 1; | |
792 | else | |
793 | tc_rate >>= 1; | |
794 | } | |
795 | ||
796 | /* update rate limiter with new values */ | |
797 | fm10k_write_reg(hw, FM10K_TC_RATE(vf_idx), tc_rate | interval); | |
798 | fm10k_write_reg(hw, FM10K_TC_MAXCREDIT(vf_idx), FM10K_TC_MAXCREDIT_64K); | |
799 | fm10k_write_reg(hw, FM10K_TC_CREDIT(vf_idx), FM10K_TC_MAXCREDIT_64K); | |
800 | ||
801 | return 0; | |
802 | } | |
803 | ||
804 | /** | |
805 | * fm10k_iov_assign_int_moderator_pf - Add VF interrupts to moderator list | |
806 | * @hw: pointer to the HW structure | |
807 | * @vf_idx: index of VF receiving GLORT | |
808 | * | |
809 | * Update the interrupt moderator linked list to include any MSI-X | |
810 | * interrupts which the VF has enabled in the MSI-X vector table. | |
811 | **/ | |
812 | static s32 fm10k_iov_assign_int_moderator_pf(struct fm10k_hw *hw, u16 vf_idx) | |
813 | { | |
814 | u16 vf_v_idx, vf_v_limit, i; | |
815 | ||
816 | /* verify vf is in range */ | |
817 | if (vf_idx >= hw->iov.num_vfs) | |
818 | return FM10K_ERR_PARAM; | |
819 | ||
eca32047 | 820 | /* determine vector offset and count */ |
c2653865 AD |
821 | vf_v_idx = fm10k_vf_vector_index(hw, vf_idx); |
822 | vf_v_limit = vf_v_idx + fm10k_vectors_per_pool(hw); | |
823 | ||
824 | /* search for first vector that is not masked */ | |
825 | for (i = vf_v_limit - 1; i > vf_v_idx; i--) { | |
826 | if (!fm10k_read_reg(hw, FM10K_MSIX_VECTOR_MASK(i))) | |
827 | break; | |
828 | } | |
829 | ||
830 | /* reset linked list so it now includes our active vectors */ | |
831 | if (vf_idx == (hw->iov.num_vfs - 1)) | |
832 | fm10k_write_reg(hw, FM10K_ITR2(0), i); | |
833 | else | |
834 | fm10k_write_reg(hw, FM10K_ITR2(vf_v_limit), i); | |
835 | ||
836 | return 0; | |
837 | } | |
838 | ||
839 | /** | |
840 | * fm10k_iov_assign_default_mac_vlan_pf - Assign a MAC and VLAN to VF | |
841 | * @hw: pointer to the HW structure | |
842 | * @vf_info: pointer to VF information structure | |
843 | * | |
844 | * Assign a MAC address and default VLAN to a VF and notify it of the update | |
845 | **/ | |
846 | static s32 fm10k_iov_assign_default_mac_vlan_pf(struct fm10k_hw *hw, | |
847 | struct fm10k_vf_info *vf_info) | |
848 | { | |
849 | u16 qmap_stride, queues_per_pool, vf_q_idx, timeout, qmap_idx, i; | |
850 | u32 msg[4], txdctl, txqctl, tdbal = 0, tdbah = 0; | |
851 | s32 err = 0; | |
852 | u16 vf_idx, vf_vid; | |
853 | ||
854 | /* verify vf is in range */ | |
855 | if (!vf_info || vf_info->vf_idx >= hw->iov.num_vfs) | |
856 | return FM10K_ERR_PARAM; | |
857 | ||
858 | /* determine qmap offsets and counts */ | |
859 | qmap_stride = (hw->iov.num_vfs > 8) ? 32 : 256; | |
860 | queues_per_pool = fm10k_queues_per_pool(hw); | |
861 | ||
862 | /* calculate starting index for queues */ | |
863 | vf_idx = vf_info->vf_idx; | |
864 | vf_q_idx = fm10k_vf_queue_index(hw, vf_idx); | |
865 | qmap_idx = qmap_stride * vf_idx; | |
866 | ||
867 | /* MAP Tx queue back to 0 temporarily, and disable it */ | |
868 | fm10k_write_reg(hw, FM10K_TQMAP(qmap_idx), 0); | |
869 | fm10k_write_reg(hw, FM10K_TXDCTL(vf_q_idx), 0); | |
870 | ||
5c69df8a JK |
871 | /* Determine correct default VLAN ID. The FM10K_VLAN_OVERRIDE bit is |
872 | * used here to indicate to the VF that it will not have privilege to | |
873 | * write VLAN_TABLE. All policy is enforced on the PF but this allows | |
874 | * the VF to correctly report errors to userspace rqeuests. | |
875 | */ | |
c2653865 | 876 | if (vf_info->pf_vid) |
5c69df8a | 877 | vf_vid = vf_info->pf_vid | FM10K_VLAN_OVERRIDE; |
c2653865 AD |
878 | else |
879 | vf_vid = vf_info->sw_vid; | |
880 | ||
881 | /* generate MAC_ADDR request */ | |
882 | fm10k_tlv_msg_init(msg, FM10K_VF_MSG_ID_MAC_VLAN); | |
883 | fm10k_tlv_attr_put_mac_vlan(msg, FM10K_MAC_VLAN_MSG_DEFAULT_MAC, | |
884 | vf_info->mac, vf_vid); | |
885 | ||
886 | /* load onto outgoing mailbox, ignore any errors on enqueue */ | |
887 | if (vf_info->mbx.ops.enqueue_tx) | |
888 | vf_info->mbx.ops.enqueue_tx(hw, &vf_info->mbx, msg); | |
889 | ||
890 | /* verify ring has disabled before modifying base address registers */ | |
891 | txdctl = fm10k_read_reg(hw, FM10K_TXDCTL(vf_q_idx)); | |
892 | for (timeout = 0; txdctl & FM10K_TXDCTL_ENABLE; timeout++) { | |
893 | /* limit ourselves to a 1ms timeout */ | |
894 | if (timeout == 10) { | |
895 | err = FM10K_ERR_DMA_PENDING; | |
896 | goto err_out; | |
897 | } | |
898 | ||
899 | usleep_range(100, 200); | |
900 | txdctl = fm10k_read_reg(hw, FM10K_TXDCTL(vf_q_idx)); | |
901 | } | |
902 | ||
903 | /* Update base address registers to contain MAC address */ | |
904 | if (is_valid_ether_addr(vf_info->mac)) { | |
905 | tdbal = (((u32)vf_info->mac[3]) << 24) | | |
906 | (((u32)vf_info->mac[4]) << 16) | | |
907 | (((u32)vf_info->mac[5]) << 8); | |
908 | ||
909 | tdbah = (((u32)0xFF) << 24) | | |
910 | (((u32)vf_info->mac[0]) << 16) | | |
911 | (((u32)vf_info->mac[1]) << 8) | | |
912 | ((u32)vf_info->mac[2]); | |
913 | } | |
914 | ||
915 | /* Record the base address into queue 0 */ | |
916 | fm10k_write_reg(hw, FM10K_TDBAL(vf_q_idx), tdbal); | |
917 | fm10k_write_reg(hw, FM10K_TDBAH(vf_q_idx), tdbah); | |
918 | ||
20076fa1 JK |
919 | /* Provide the VF the ITR scale, using software-defined fields in TDLEN |
920 | * to pass the information during VF initialization. See definition of | |
921 | * FM10K_TDLEN_ITR_SCALE_SHIFT for more details. | |
922 | */ | |
923 | fm10k_write_reg(hw, FM10K_TDLEN(vf_q_idx), hw->mac.itr_scale << | |
924 | FM10K_TDLEN_ITR_SCALE_SHIFT); | |
925 | ||
c2653865 AD |
926 | err_out: |
927 | /* configure Queue control register */ | |
928 | txqctl = ((u32)vf_vid << FM10K_TXQCTL_VID_SHIFT) & | |
929 | FM10K_TXQCTL_VID_MASK; | |
930 | txqctl |= (vf_idx << FM10K_TXQCTL_TC_SHIFT) | | |
931 | FM10K_TXQCTL_VF | vf_idx; | |
932 | ||
aa502b4a | 933 | /* assign VLAN ID */ |
c2653865 AD |
934 | for (i = 0; i < queues_per_pool; i++) |
935 | fm10k_write_reg(hw, FM10K_TXQCTL(vf_q_idx + i), txqctl); | |
936 | ||
937 | /* restore the queue back to VF ownership */ | |
938 | fm10k_write_reg(hw, FM10K_TQMAP(qmap_idx), vf_q_idx); | |
939 | return err; | |
940 | } | |
941 | ||
942 | /** | |
943 | * fm10k_iov_reset_resources_pf - Reassign queues and interrupts to a VF | |
944 | * @hw: pointer to the HW structure | |
945 | * @vf_info: pointer to VF information structure | |
946 | * | |
947 | * Reassign the interrupts and queues to a VF following an FLR | |
948 | **/ | |
949 | static s32 fm10k_iov_reset_resources_pf(struct fm10k_hw *hw, | |
950 | struct fm10k_vf_info *vf_info) | |
951 | { | |
952 | u16 qmap_stride, queues_per_pool, vf_q_idx, qmap_idx; | |
953 | u32 tdbal = 0, tdbah = 0, txqctl, rxqctl; | |
954 | u16 vf_v_idx, vf_v_limit, vf_vid; | |
955 | u8 vf_idx = vf_info->vf_idx; | |
956 | int i; | |
957 | ||
958 | /* verify vf is in range */ | |
959 | if (vf_idx >= hw->iov.num_vfs) | |
960 | return FM10K_ERR_PARAM; | |
961 | ||
962 | /* clear event notification of VF FLR */ | |
fcdb0a99 | 963 | fm10k_write_reg(hw, FM10K_PFVFLREC(vf_idx / 32), BIT(vf_idx % 32)); |
c2653865 AD |
964 | |
965 | /* force timeout and then disconnect the mailbox */ | |
966 | vf_info->mbx.timeout = 0; | |
967 | if (vf_info->mbx.ops.disconnect) | |
968 | vf_info->mbx.ops.disconnect(hw, &vf_info->mbx); | |
969 | ||
eca32047 | 970 | /* determine vector offset and count */ |
c2653865 AD |
971 | vf_v_idx = fm10k_vf_vector_index(hw, vf_idx); |
972 | vf_v_limit = vf_v_idx + fm10k_vectors_per_pool(hw); | |
973 | ||
974 | /* determine qmap offsets and counts */ | |
975 | qmap_stride = (hw->iov.num_vfs > 8) ? 32 : 256; | |
976 | queues_per_pool = fm10k_queues_per_pool(hw); | |
977 | qmap_idx = qmap_stride * vf_idx; | |
978 | ||
979 | /* make all the queues inaccessible to the VF */ | |
980 | for (i = qmap_idx; i < (qmap_idx + qmap_stride); i++) { | |
981 | fm10k_write_reg(hw, FM10K_TQMAP(i), 0); | |
982 | fm10k_write_reg(hw, FM10K_RQMAP(i), 0); | |
983 | } | |
984 | ||
985 | /* calculate starting index for queues */ | |
986 | vf_q_idx = fm10k_vf_queue_index(hw, vf_idx); | |
987 | ||
988 | /* determine correct default VLAN ID */ | |
989 | if (vf_info->pf_vid) | |
990 | vf_vid = vf_info->pf_vid; | |
991 | else | |
992 | vf_vid = vf_info->sw_vid; | |
993 | ||
994 | /* configure Queue control register */ | |
995 | txqctl = ((u32)vf_vid << FM10K_TXQCTL_VID_SHIFT) | | |
996 | (vf_idx << FM10K_TXQCTL_TC_SHIFT) | | |
997 | FM10K_TXQCTL_VF | vf_idx; | |
1aab144c | 998 | rxqctl = (vf_idx << FM10K_RXQCTL_VF_SHIFT) | FM10K_RXQCTL_VF; |
c2653865 AD |
999 | |
1000 | /* stop further DMA and reset queue ownership back to VF */ | |
1001 | for (i = vf_q_idx; i < (queues_per_pool + vf_q_idx); i++) { | |
1002 | fm10k_write_reg(hw, FM10K_TXDCTL(i), 0); | |
1003 | fm10k_write_reg(hw, FM10K_TXQCTL(i), txqctl); | |
1004 | fm10k_write_reg(hw, FM10K_RXDCTL(i), | |
1005 | FM10K_RXDCTL_WRITE_BACK_MIN_DELAY | | |
1006 | FM10K_RXDCTL_DROP_ON_EMPTY); | |
1007 | fm10k_write_reg(hw, FM10K_RXQCTL(i), rxqctl); | |
1008 | } | |
1009 | ||
1010 | /* reset TC with -1 credits and no quanta to prevent transmit */ | |
1011 | fm10k_write_reg(hw, FM10K_TC_MAXCREDIT(vf_idx), 0); | |
1012 | fm10k_write_reg(hw, FM10K_TC_RATE(vf_idx), 0); | |
1013 | fm10k_write_reg(hw, FM10K_TC_CREDIT(vf_idx), | |
1014 | FM10K_TC_CREDIT_CREDIT_MASK); | |
1015 | ||
1016 | /* update our first entry in the table based on previous VF */ | |
1017 | if (!vf_idx) | |
1018 | hw->mac.ops.update_int_moderator(hw); | |
1019 | else | |
1020 | hw->iov.ops.assign_int_moderator(hw, vf_idx - 1); | |
1021 | ||
1022 | /* reset linked list so it now includes our active vectors */ | |
1023 | if (vf_idx == (hw->iov.num_vfs - 1)) | |
1024 | fm10k_write_reg(hw, FM10K_ITR2(0), vf_v_idx); | |
1025 | else | |
1026 | fm10k_write_reg(hw, FM10K_ITR2(vf_v_limit), vf_v_idx); | |
1027 | ||
1028 | /* link remaining vectors so that next points to previous */ | |
1029 | for (vf_v_idx++; vf_v_idx < vf_v_limit; vf_v_idx++) | |
1030 | fm10k_write_reg(hw, FM10K_ITR2(vf_v_idx), vf_v_idx - 1); | |
1031 | ||
1032 | /* zero out MBMEM, VLAN_TABLE, RETA, RSSRK, and MRQC registers */ | |
1033 | for (i = FM10K_VFMBMEM_LEN; i--;) | |
1034 | fm10k_write_reg(hw, FM10K_MBMEM_VF(vf_idx, i), 0); | |
1035 | for (i = FM10K_VLAN_TABLE_SIZE; i--;) | |
1036 | fm10k_write_reg(hw, FM10K_VLAN_TABLE(vf_info->vsi, i), 0); | |
1037 | for (i = FM10K_RETA_SIZE; i--;) | |
1038 | fm10k_write_reg(hw, FM10K_RETA(vf_info->vsi, i), 0); | |
1039 | for (i = FM10K_RSSRK_SIZE; i--;) | |
1040 | fm10k_write_reg(hw, FM10K_RSSRK(vf_info->vsi, i), 0); | |
1041 | fm10k_write_reg(hw, FM10K_MRQC(vf_info->vsi), 0); | |
1042 | ||
1043 | /* Update base address registers to contain MAC address */ | |
1044 | if (is_valid_ether_addr(vf_info->mac)) { | |
1045 | tdbal = (((u32)vf_info->mac[3]) << 24) | | |
1046 | (((u32)vf_info->mac[4]) << 16) | | |
1047 | (((u32)vf_info->mac[5]) << 8); | |
1048 | tdbah = (((u32)0xFF) << 24) | | |
1049 | (((u32)vf_info->mac[0]) << 16) | | |
1050 | (((u32)vf_info->mac[1]) << 8) | | |
1051 | ((u32)vf_info->mac[2]); | |
1052 | } | |
1053 | ||
eca32047 | 1054 | /* map queue pairs back to VF from last to first */ |
c2653865 AD |
1055 | for (i = queues_per_pool; i--;) { |
1056 | fm10k_write_reg(hw, FM10K_TDBAL(vf_q_idx + i), tdbal); | |
1057 | fm10k_write_reg(hw, FM10K_TDBAH(vf_q_idx + i), tdbah); | |
20076fa1 JK |
1058 | /* See definition of FM10K_TDLEN_ITR_SCALE_SHIFT for an |
1059 | * explanation of how TDLEN is used. | |
1060 | */ | |
1061 | fm10k_write_reg(hw, FM10K_TDLEN(vf_q_idx + i), | |
1062 | hw->mac.itr_scale << | |
1063 | FM10K_TDLEN_ITR_SCALE_SHIFT); | |
c2653865 AD |
1064 | fm10k_write_reg(hw, FM10K_TQMAP(qmap_idx + i), vf_q_idx + i); |
1065 | fm10k_write_reg(hw, FM10K_RQMAP(qmap_idx + i), vf_q_idx + i); | |
1066 | } | |
1067 | ||
fba341d5 JK |
1068 | /* repeat the first ring for all the remaining VF rings */ |
1069 | for (i = queues_per_pool; i < qmap_stride; i++) { | |
1070 | fm10k_write_reg(hw, FM10K_TQMAP(qmap_idx + i), vf_q_idx); | |
1071 | fm10k_write_reg(hw, FM10K_RQMAP(qmap_idx + i), vf_q_idx); | |
1072 | } | |
1073 | ||
c2653865 AD |
1074 | return 0; |
1075 | } | |
1076 | ||
1077 | /** | |
1078 | * fm10k_iov_set_lport_pf - Assign and enable a logical port for a given VF | |
1079 | * @hw: pointer to hardware structure | |
1080 | * @vf_info: pointer to VF information structure | |
1081 | * @lport_idx: Logical port offset from the hardware glort | |
1082 | * @flags: Set of capability flags to extend port beyond basic functionality | |
1083 | * | |
1084 | * This function allows enabling a VF port by assigning it a GLORT and | |
1085 | * setting the flags so that it can enable an Rx mode. | |
1086 | **/ | |
1087 | static s32 fm10k_iov_set_lport_pf(struct fm10k_hw *hw, | |
1088 | struct fm10k_vf_info *vf_info, | |
1089 | u16 lport_idx, u8 flags) | |
1090 | { | |
1091 | u16 glort = (hw->mac.dglort_map + lport_idx) & FM10K_DGLORTMAP_NONE; | |
1092 | ||
1093 | /* if glort is not valid return error */ | |
1094 | if (!fm10k_glort_valid_pf(hw, glort)) | |
1095 | return FM10K_ERR_PARAM; | |
1096 | ||
1097 | vf_info->vf_flags = flags | FM10K_VF_FLAG_NONE_CAPABLE; | |
1098 | vf_info->glort = glort; | |
1099 | ||
1100 | return 0; | |
1101 | } | |
1102 | ||
1103 | /** | |
1104 | * fm10k_iov_reset_lport_pf - Disable a logical port for a given VF | |
1105 | * @hw: pointer to hardware structure | |
1106 | * @vf_info: pointer to VF information structure | |
1107 | * | |
1108 | * This function disables a VF port by stripping it of a GLORT and | |
1109 | * setting the flags so that it cannot enable any Rx mode. | |
1110 | **/ | |
1111 | static void fm10k_iov_reset_lport_pf(struct fm10k_hw *hw, | |
1112 | struct fm10k_vf_info *vf_info) | |
1113 | { | |
1114 | u32 msg[1]; | |
1115 | ||
1116 | /* need to disable the port if it is already enabled */ | |
1117 | if (FM10K_VF_FLAG_ENABLED(vf_info)) { | |
1118 | /* notify switch that this port has been disabled */ | |
1119 | fm10k_update_lport_state_pf(hw, vf_info->glort, 1, false); | |
1120 | ||
1121 | /* generate port state response to notify VF it is not ready */ | |
1122 | fm10k_tlv_msg_init(msg, FM10K_VF_MSG_ID_LPORT_STATE); | |
1123 | vf_info->mbx.ops.enqueue_tx(hw, &vf_info->mbx, msg); | |
1124 | } | |
1125 | ||
1126 | /* clear flags and glort if it exists */ | |
1127 | vf_info->vf_flags = 0; | |
1128 | vf_info->glort = 0; | |
1129 | } | |
1130 | ||
1131 | /** | |
1132 | * fm10k_iov_update_stats_pf - Updates hardware related statistics for VFs | |
1133 | * @hw: pointer to hardware structure | |
1134 | * @q: stats for all queues of a VF | |
1135 | * @vf_idx: index of VF | |
1136 | * | |
1137 | * This function collects queue stats for VFs. | |
1138 | **/ | |
1139 | static void fm10k_iov_update_stats_pf(struct fm10k_hw *hw, | |
1140 | struct fm10k_hw_stats_q *q, | |
1141 | u16 vf_idx) | |
1142 | { | |
1143 | u32 idx, qpp; | |
1144 | ||
1145 | /* get stats for all of the queues */ | |
1146 | qpp = fm10k_queues_per_pool(hw); | |
1147 | idx = fm10k_vf_queue_index(hw, vf_idx); | |
1148 | fm10k_update_hw_stats_q(hw, q, idx, qpp); | |
1149 | } | |
1150 | ||
1151 | /** | |
1152 | * fm10k_iov_msg_msix_pf - Message handler for MSI-X request from VF | |
1153 | * @hw: Pointer to hardware structure | |
1154 | * @results: Pointer array to message, results[0] is pointer to message | |
1155 | * @mbx: Pointer to mailbox information structure | |
1156 | * | |
1157 | * This function is a default handler for MSI-X requests from the VF. The | |
1158 | * assumption is that in this case it is acceptable to just directly | |
eca32047 | 1159 | * hand off the message from the VF to the underlying shared code. |
c2653865 AD |
1160 | **/ |
1161 | s32 fm10k_iov_msg_msix_pf(struct fm10k_hw *hw, u32 **results, | |
1162 | struct fm10k_mbx_info *mbx) | |
1163 | { | |
1164 | struct fm10k_vf_info *vf_info = (struct fm10k_vf_info *)mbx; | |
1165 | u8 vf_idx = vf_info->vf_idx; | |
1166 | ||
1167 | return hw->iov.ops.assign_int_moderator(hw, vf_idx); | |
1168 | } | |
1169 | ||
9adbac59 | 1170 | /** |
aa502b4a | 1171 | * fm10k_iov_select_vid - Select correct default VLAN ID |
9adbac59 | 1172 | * @hw: Pointer to hardware structure |
aa502b4a | 1173 | * @vid: VLAN ID to correct |
9adbac59 | 1174 | * |
aa502b4a JK |
1175 | * Will report an error if the VLAN ID is out of range. For VID = 0, it will |
1176 | * return either the pf_vid or sw_vid depending on which one is set. | |
9adbac59 | 1177 | */ |
e214d85b | 1178 | static s32 fm10k_iov_select_vid(struct fm10k_vf_info *vf_info, u16 vid) |
9adbac59 JK |
1179 | { |
1180 | if (!vid) | |
1181 | return vf_info->pf_vid ? vf_info->pf_vid : vf_info->sw_vid; | |
1182 | else if (vf_info->pf_vid && vid != vf_info->pf_vid) | |
1183 | return FM10K_ERR_PARAM; | |
1184 | else | |
1185 | return vid; | |
1186 | } | |
1187 | ||
c2653865 AD |
1188 | /** |
1189 | * fm10k_iov_msg_mac_vlan_pf - Message handler for MAC/VLAN request from VF | |
1190 | * @hw: Pointer to hardware structure | |
1191 | * @results: Pointer array to message, results[0] is pointer to message | |
1192 | * @mbx: Pointer to mailbox information structure | |
1193 | * | |
1194 | * This function is a default handler for MAC/VLAN requests from the VF. | |
1195 | * The assumption is that in this case it is acceptable to just directly | |
eca32047 | 1196 | * hand off the message from the VF to the underlying shared code. |
c2653865 AD |
1197 | **/ |
1198 | s32 fm10k_iov_msg_mac_vlan_pf(struct fm10k_hw *hw, u32 **results, | |
1199 | struct fm10k_mbx_info *mbx) | |
1200 | { | |
1201 | struct fm10k_vf_info *vf_info = (struct fm10k_vf_info *)mbx; | |
c2653865 AD |
1202 | u8 mac[ETH_ALEN]; |
1203 | u32 *result; | |
9adbac59 JK |
1204 | int err = 0; |
1205 | bool set; | |
c2653865 AD |
1206 | u16 vlan; |
1207 | u32 vid; | |
1208 | ||
1209 | /* we shouldn't be updating rules on a disabled interface */ | |
1210 | if (!FM10K_VF_FLAG_ENABLED(vf_info)) | |
1211 | err = FM10K_ERR_PARAM; | |
1212 | ||
1213 | if (!err && !!results[FM10K_MAC_VLAN_MSG_VLAN]) { | |
1214 | result = results[FM10K_MAC_VLAN_MSG_VLAN]; | |
1215 | ||
1216 | /* record VLAN id requested */ | |
1217 | err = fm10k_tlv_attr_get_u32(result, &vid); | |
1218 | if (err) | |
1219 | return err; | |
1220 | ||
9adbac59 JK |
1221 | set = !(vid & FM10K_VLAN_CLEAR); |
1222 | vid &= ~FM10K_VLAN_CLEAR; | |
1223 | ||
f808c5db JK |
1224 | /* if the length field has been set, this is a multi-bit |
1225 | * update request. For multi-bit requests, simply disallow | |
1226 | * them when the pf_vid has been set. In this case, the PF | |
1227 | * should have already cleared the VLAN_TABLE, and if we | |
1228 | * allowed them, it could allow a rogue VF to receive traffic | |
1229 | * on a VLAN it was not assigned. In the single-bit case, we | |
1230 | * need to modify requests for VLAN 0 to use the default PF or | |
1231 | * SW vid when assigned. | |
1232 | */ | |
4ab0f79b | 1233 | |
f808c5db JK |
1234 | if (vid >> 16) { |
1235 | /* prevent multi-bit requests when PF has | |
1236 | * administratively set the VLAN for this VF | |
1237 | */ | |
1238 | if (vf_info->pf_vid) | |
1239 | return FM10K_ERR_PARAM; | |
1240 | } else { | |
1241 | err = fm10k_iov_select_vid(vf_info, (u16)vid); | |
1242 | if (err < 0) | |
1243 | return err; | |
1244 | ||
1245 | vid = err; | |
1246 | } | |
c2653865 AD |
1247 | |
1248 | /* update VSI info for VF in regards to VLAN table */ | |
9adbac59 | 1249 | err = hw->mac.ops.update_vlan(hw, vid, vf_info->vsi, set); |
c2653865 AD |
1250 | } |
1251 | ||
1252 | if (!err && !!results[FM10K_MAC_VLAN_MSG_MAC]) { | |
1253 | result = results[FM10K_MAC_VLAN_MSG_MAC]; | |
1254 | ||
1255 | /* record unicast MAC address requested */ | |
1256 | err = fm10k_tlv_attr_get_mac_vlan(result, mac, &vlan); | |
1257 | if (err) | |
1258 | return err; | |
1259 | ||
1260 | /* block attempts to set MAC for a locked device */ | |
1261 | if (is_valid_ether_addr(vf_info->mac) && | |
6186ddf0 | 1262 | !ether_addr_equal(mac, vf_info->mac)) |
c2653865 AD |
1263 | return FM10K_ERR_PARAM; |
1264 | ||
9adbac59 JK |
1265 | set = !(vlan & FM10K_VLAN_CLEAR); |
1266 | vlan &= ~FM10K_VLAN_CLEAR; | |
1267 | ||
1268 | err = fm10k_iov_select_vid(vf_info, vlan); | |
1269 | if (err < 0) | |
1270 | return err; | |
4ab0f79b JK |
1271 | |
1272 | vlan = (u16)err; | |
c2653865 AD |
1273 | |
1274 | /* notify switch of request for new unicast address */ | |
9adbac59 JK |
1275 | err = hw->mac.ops.update_uc_addr(hw, vf_info->glort, |
1276 | mac, vlan, set, 0); | |
c2653865 AD |
1277 | } |
1278 | ||
1279 | if (!err && !!results[FM10K_MAC_VLAN_MSG_MULTICAST]) { | |
1280 | result = results[FM10K_MAC_VLAN_MSG_MULTICAST]; | |
1281 | ||
1282 | /* record multicast MAC address requested */ | |
1283 | err = fm10k_tlv_attr_get_mac_vlan(result, mac, &vlan); | |
1284 | if (err) | |
1285 | return err; | |
1286 | ||
1287 | /* verify that the VF is allowed to request multicast */ | |
1288 | if (!(vf_info->vf_flags & FM10K_VF_FLAG_MULTI_ENABLED)) | |
1289 | return FM10K_ERR_PARAM; | |
1290 | ||
9adbac59 JK |
1291 | set = !(vlan & FM10K_VLAN_CLEAR); |
1292 | vlan &= ~FM10K_VLAN_CLEAR; | |
1293 | ||
1294 | err = fm10k_iov_select_vid(vf_info, vlan); | |
1295 | if (err < 0) | |
1296 | return err; | |
4ab0f79b JK |
1297 | |
1298 | vlan = (u16)err; | |
c2653865 AD |
1299 | |
1300 | /* notify switch of request for new multicast address */ | |
9adbac59 JK |
1301 | err = hw->mac.ops.update_mc_addr(hw, vf_info->glort, |
1302 | mac, vlan, set); | |
c2653865 AD |
1303 | } |
1304 | ||
1305 | return err; | |
1306 | } | |
1307 | ||
1308 | /** | |
1309 | * fm10k_iov_supported_xcast_mode_pf - Determine best match for xcast mode | |
1310 | * @vf_info: VF info structure containing capability flags | |
1311 | * @mode: Requested xcast mode | |
1312 | * | |
1313 | * This function outputs the mode that most closely matches the requested | |
1314 | * mode. If not modes match it will request we disable the port | |
1315 | **/ | |
1316 | static u8 fm10k_iov_supported_xcast_mode_pf(struct fm10k_vf_info *vf_info, | |
1317 | u8 mode) | |
1318 | { | |
1319 | u8 vf_flags = vf_info->vf_flags; | |
1320 | ||
1321 | /* match up mode to capabilities as best as possible */ | |
1322 | switch (mode) { | |
1323 | case FM10K_XCAST_MODE_PROMISC: | |
1324 | if (vf_flags & FM10K_VF_FLAG_PROMISC_CAPABLE) | |
1325 | return FM10K_XCAST_MODE_PROMISC; | |
1326 | /* fallthough */ | |
1327 | case FM10K_XCAST_MODE_ALLMULTI: | |
1328 | if (vf_flags & FM10K_VF_FLAG_ALLMULTI_CAPABLE) | |
1329 | return FM10K_XCAST_MODE_ALLMULTI; | |
1330 | /* fallthough */ | |
1331 | case FM10K_XCAST_MODE_MULTI: | |
1332 | if (vf_flags & FM10K_VF_FLAG_MULTI_CAPABLE) | |
1333 | return FM10K_XCAST_MODE_MULTI; | |
1334 | /* fallthough */ | |
1335 | case FM10K_XCAST_MODE_NONE: | |
1336 | if (vf_flags & FM10K_VF_FLAG_NONE_CAPABLE) | |
1337 | return FM10K_XCAST_MODE_NONE; | |
1338 | /* fallthough */ | |
1339 | default: | |
1340 | break; | |
1341 | } | |
1342 | ||
1343 | /* disable interface as it should not be able to request any */ | |
1344 | return FM10K_XCAST_MODE_DISABLE; | |
1345 | } | |
1346 | ||
1347 | /** | |
1348 | * fm10k_iov_msg_lport_state_pf - Message handler for port state requests | |
1349 | * @hw: Pointer to hardware structure | |
1350 | * @results: Pointer array to message, results[0] is pointer to message | |
1351 | * @mbx: Pointer to mailbox information structure | |
1352 | * | |
1353 | * This function is a default handler for port state requests. The port | |
1354 | * state requests for now are basic and consist of enabling or disabling | |
1355 | * the port. | |
1356 | **/ | |
1357 | s32 fm10k_iov_msg_lport_state_pf(struct fm10k_hw *hw, u32 **results, | |
1358 | struct fm10k_mbx_info *mbx) | |
1359 | { | |
1360 | struct fm10k_vf_info *vf_info = (struct fm10k_vf_info *)mbx; | |
1361 | u32 *result; | |
1362 | s32 err = 0; | |
1363 | u32 msg[2]; | |
1364 | u8 mode = 0; | |
1365 | ||
1366 | /* verify VF is allowed to enable even minimal mode */ | |
1367 | if (!(vf_info->vf_flags & FM10K_VF_FLAG_NONE_CAPABLE)) | |
1368 | return FM10K_ERR_PARAM; | |
1369 | ||
1370 | if (!!results[FM10K_LPORT_STATE_MSG_XCAST_MODE]) { | |
1371 | result = results[FM10K_LPORT_STATE_MSG_XCAST_MODE]; | |
1372 | ||
1373 | /* XCAST mode update requested */ | |
1374 | err = fm10k_tlv_attr_get_u8(result, &mode); | |
1375 | if (err) | |
1376 | return FM10K_ERR_PARAM; | |
1377 | ||
1378 | /* prep for possible demotion depending on capabilities */ | |
1379 | mode = fm10k_iov_supported_xcast_mode_pf(vf_info, mode); | |
1380 | ||
1381 | /* if mode is not currently enabled, enable it */ | |
fcdb0a99 | 1382 | if (!(FM10K_VF_FLAG_ENABLED(vf_info) & BIT(mode))) |
c2653865 AD |
1383 | fm10k_update_xcast_mode_pf(hw, vf_info->glort, mode); |
1384 | ||
1385 | /* swap mode back to a bit flag */ | |
1386 | mode = FM10K_VF_FLAG_SET_MODE(mode); | |
1387 | } else if (!results[FM10K_LPORT_STATE_MSG_DISABLE]) { | |
1388 | /* need to disable the port if it is already enabled */ | |
1389 | if (FM10K_VF_FLAG_ENABLED(vf_info)) | |
1390 | err = fm10k_update_lport_state_pf(hw, vf_info->glort, | |
1391 | 1, false); | |
1392 | ||
ee4373e7 JK |
1393 | /* we need to clear VF_FLAG_ENABLED flags in order to ensure |
1394 | * that we actually re-enable the LPORT state below. Note that | |
1395 | * this has no impact if the VF is already disabled, as the | |
1396 | * flags are already cleared. | |
1397 | */ | |
1398 | if (!err) | |
1399 | vf_info->vf_flags = FM10K_VF_FLAG_CAPABLE(vf_info); | |
1400 | ||
c2653865 AD |
1401 | /* when enabling the port we should reset the rate limiters */ |
1402 | hw->iov.ops.configure_tc(hw, vf_info->vf_idx, vf_info->rate); | |
1403 | ||
1404 | /* set mode for minimal functionality */ | |
1405 | mode = FM10K_VF_FLAG_SET_MODE_NONE; | |
1406 | ||
1407 | /* generate port state response to notify VF it is ready */ | |
1408 | fm10k_tlv_msg_init(msg, FM10K_VF_MSG_ID_LPORT_STATE); | |
1409 | fm10k_tlv_attr_put_bool(msg, FM10K_LPORT_STATE_MSG_READY); | |
1410 | mbx->ops.enqueue_tx(hw, mbx, msg); | |
1411 | } | |
1412 | ||
1413 | /* if enable state toggled note the update */ | |
1414 | if (!err && (!FM10K_VF_FLAG_ENABLED(vf_info) != !mode)) | |
1415 | err = fm10k_update_lport_state_pf(hw, vf_info->glort, 1, | |
1416 | !!mode); | |
1417 | ||
1418 | /* if state change succeeded, then update our stored state */ | |
1419 | mode |= FM10K_VF_FLAG_CAPABLE(vf_info); | |
1420 | if (!err) | |
1421 | vf_info->vf_flags = mode; | |
1422 | ||
1423 | return err; | |
1424 | } | |
1425 | ||
b6fec18f AD |
1426 | /** |
1427 | * fm10k_update_stats_hw_pf - Updates hardware related statistics of PF | |
1428 | * @hw: pointer to hardware structure | |
1429 | * @stats: pointer to the stats structure to update | |
1430 | * | |
1431 | * This function collects and aggregates global and per queue hardware | |
1432 | * statistics. | |
1433 | **/ | |
1434 | static void fm10k_update_hw_stats_pf(struct fm10k_hw *hw, | |
1435 | struct fm10k_hw_stats *stats) | |
1436 | { | |
1437 | u32 timeout, ur, ca, um, xec, vlan_drop, loopback_drop, nodesc_drop; | |
1438 | u32 id, id_prev; | |
1439 | ||
1440 | /* Use Tx queue 0 as a canary to detect a reset */ | |
1441 | id = fm10k_read_reg(hw, FM10K_TXQCTL(0)); | |
1442 | ||
1443 | /* Read Global Statistics */ | |
1444 | do { | |
1445 | timeout = fm10k_read_hw_stats_32b(hw, FM10K_STATS_TIMEOUT, | |
1446 | &stats->timeout); | |
1447 | ur = fm10k_read_hw_stats_32b(hw, FM10K_STATS_UR, &stats->ur); | |
1448 | ca = fm10k_read_hw_stats_32b(hw, FM10K_STATS_CA, &stats->ca); | |
1449 | um = fm10k_read_hw_stats_32b(hw, FM10K_STATS_UM, &stats->um); | |
1450 | xec = fm10k_read_hw_stats_32b(hw, FM10K_STATS_XEC, &stats->xec); | |
1451 | vlan_drop = fm10k_read_hw_stats_32b(hw, FM10K_STATS_VLAN_DROP, | |
1452 | &stats->vlan_drop); | |
3d02b3df BA |
1453 | loopback_drop = |
1454 | fm10k_read_hw_stats_32b(hw, | |
1455 | FM10K_STATS_LOOPBACK_DROP, | |
1456 | &stats->loopback_drop); | |
b6fec18f AD |
1457 | nodesc_drop = fm10k_read_hw_stats_32b(hw, |
1458 | FM10K_STATS_NODESC_DROP, | |
1459 | &stats->nodesc_drop); | |
1460 | ||
1461 | /* if value has not changed then we have consistent data */ | |
1462 | id_prev = id; | |
1463 | id = fm10k_read_reg(hw, FM10K_TXQCTL(0)); | |
1464 | } while ((id ^ id_prev) & FM10K_TXQCTL_ID_MASK); | |
1465 | ||
1466 | /* drop non-ID bits and set VALID ID bit */ | |
1467 | id &= FM10K_TXQCTL_ID_MASK; | |
1468 | id |= FM10K_STAT_VALID; | |
1469 | ||
1470 | /* Update Global Statistics */ | |
1471 | if (stats->stats_idx == id) { | |
1472 | stats->timeout.count += timeout; | |
1473 | stats->ur.count += ur; | |
1474 | stats->ca.count += ca; | |
1475 | stats->um.count += um; | |
1476 | stats->xec.count += xec; | |
1477 | stats->vlan_drop.count += vlan_drop; | |
1478 | stats->loopback_drop.count += loopback_drop; | |
1479 | stats->nodesc_drop.count += nodesc_drop; | |
1480 | } | |
1481 | ||
1482 | /* Update bases and record current PF id */ | |
1483 | fm10k_update_hw_base_32b(&stats->timeout, timeout); | |
1484 | fm10k_update_hw_base_32b(&stats->ur, ur); | |
1485 | fm10k_update_hw_base_32b(&stats->ca, ca); | |
1486 | fm10k_update_hw_base_32b(&stats->um, um); | |
1487 | fm10k_update_hw_base_32b(&stats->xec, xec); | |
1488 | fm10k_update_hw_base_32b(&stats->vlan_drop, vlan_drop); | |
1489 | fm10k_update_hw_base_32b(&stats->loopback_drop, loopback_drop); | |
1490 | fm10k_update_hw_base_32b(&stats->nodesc_drop, nodesc_drop); | |
1491 | stats->stats_idx = id; | |
1492 | ||
1493 | /* Update Queue Statistics */ | |
1494 | fm10k_update_hw_stats_q(hw, stats->q, 0, hw->mac.max_queues); | |
1495 | } | |
1496 | ||
1497 | /** | |
1498 | * fm10k_rebind_hw_stats_pf - Resets base for hardware statistics of PF | |
1499 | * @hw: pointer to hardware structure | |
1500 | * @stats: pointer to the stats structure to update | |
1501 | * | |
1502 | * This function resets the base for global and per queue hardware | |
1503 | * statistics. | |
1504 | **/ | |
1505 | static void fm10k_rebind_hw_stats_pf(struct fm10k_hw *hw, | |
1506 | struct fm10k_hw_stats *stats) | |
1507 | { | |
1508 | /* Unbind Global Statistics */ | |
1509 | fm10k_unbind_hw_stats_32b(&stats->timeout); | |
1510 | fm10k_unbind_hw_stats_32b(&stats->ur); | |
1511 | fm10k_unbind_hw_stats_32b(&stats->ca); | |
1512 | fm10k_unbind_hw_stats_32b(&stats->um); | |
1513 | fm10k_unbind_hw_stats_32b(&stats->xec); | |
1514 | fm10k_unbind_hw_stats_32b(&stats->vlan_drop); | |
1515 | fm10k_unbind_hw_stats_32b(&stats->loopback_drop); | |
1516 | fm10k_unbind_hw_stats_32b(&stats->nodesc_drop); | |
1517 | ||
1518 | /* Unbind Queue Statistics */ | |
1519 | fm10k_unbind_hw_stats_q(stats->q, 0, hw->mac.max_queues); | |
1520 | ||
1521 | /* Reinitialize bases for all stats */ | |
1522 | fm10k_update_hw_stats_pf(hw, stats); | |
1523 | } | |
1524 | ||
401b5383 AD |
1525 | /** |
1526 | * fm10k_set_dma_mask_pf - Configures PhyAddrSpace to limit DMA to system | |
1527 | * @hw: pointer to hardware structure | |
1528 | * @dma_mask: 64 bit DMA mask required for platform | |
1529 | * | |
1530 | * This function sets the PHYADDR.PhyAddrSpace bits for the endpoint in order | |
1531 | * to limit the access to memory beyond what is physically in the system. | |
1532 | **/ | |
1533 | static void fm10k_set_dma_mask_pf(struct fm10k_hw *hw, u64 dma_mask) | |
1534 | { | |
1535 | /* we need to write the upper 32 bits of DMA mask to PhyAddrSpace */ | |
1536 | u32 phyaddr = (u32)(dma_mask >> 32); | |
1537 | ||
1538 | fm10k_write_reg(hw, FM10K_PHYADDR, phyaddr); | |
1539 | } | |
1540 | ||
b6fec18f AD |
1541 | /** |
1542 | * fm10k_get_fault_pf - Record a fault in one of the interface units | |
1543 | * @hw: pointer to hardware structure | |
1544 | * @type: pointer to fault type register offset | |
1545 | * @fault: pointer to memory location to record the fault | |
1546 | * | |
1547 | * Record the fault register contents to the fault data structure and | |
1548 | * clear the entry from the register. | |
1549 | * | |
1550 | * Returns ERR_PARAM if invalid register is specified or no error is present. | |
1551 | **/ | |
1552 | static s32 fm10k_get_fault_pf(struct fm10k_hw *hw, int type, | |
1553 | struct fm10k_fault *fault) | |
1554 | { | |
1555 | u32 func; | |
1556 | ||
1557 | /* verify the fault register is in range and is aligned */ | |
1558 | switch (type) { | |
1559 | case FM10K_PCA_FAULT: | |
1560 | case FM10K_THI_FAULT: | |
1561 | case FM10K_FUM_FAULT: | |
1562 | break; | |
1563 | default: | |
1564 | return FM10K_ERR_PARAM; | |
1565 | } | |
1566 | ||
1567 | /* only service faults that are valid */ | |
1568 | func = fm10k_read_reg(hw, type + FM10K_FAULT_FUNC); | |
1569 | if (!(func & FM10K_FAULT_FUNC_VALID)) | |
1570 | return FM10K_ERR_PARAM; | |
1571 | ||
1572 | /* read remaining fields */ | |
1573 | fault->address = fm10k_read_reg(hw, type + FM10K_FAULT_ADDR_HI); | |
1574 | fault->address <<= 32; | |
1575 | fault->address = fm10k_read_reg(hw, type + FM10K_FAULT_ADDR_LO); | |
1576 | fault->specinfo = fm10k_read_reg(hw, type + FM10K_FAULT_SPECINFO); | |
1577 | ||
1578 | /* clear valid bit to allow for next error */ | |
1579 | fm10k_write_reg(hw, type + FM10K_FAULT_FUNC, FM10K_FAULT_FUNC_VALID); | |
1580 | ||
1581 | /* Record which function triggered the error */ | |
1582 | if (func & FM10K_FAULT_FUNC_PF) | |
1583 | fault->func = 0; | |
1584 | else | |
1585 | fault->func = 1 + ((func & FM10K_FAULT_FUNC_VF_MASK) >> | |
1586 | FM10K_FAULT_FUNC_VF_SHIFT); | |
1587 | ||
1588 | /* record fault type */ | |
1589 | fault->type = func & FM10K_FAULT_FUNC_TYPE_MASK; | |
1590 | ||
1591 | return 0; | |
1592 | } | |
1593 | ||
401b5383 AD |
1594 | /** |
1595 | * fm10k_request_lport_map_pf - Request LPORT map from the switch API | |
1596 | * @hw: pointer to hardware structure | |
1597 | * | |
1598 | **/ | |
1599 | static s32 fm10k_request_lport_map_pf(struct fm10k_hw *hw) | |
1600 | { | |
1601 | struct fm10k_mbx_info *mbx = &hw->mbx; | |
1602 | u32 msg[1]; | |
1603 | ||
1604 | /* issue request asking for LPORT map */ | |
1605 | fm10k_tlv_msg_init(msg, FM10K_PF_MSG_ID_LPORT_MAP); | |
1606 | ||
1607 | /* load onto outgoing mailbox */ | |
1608 | return mbx->ops.enqueue_tx(hw, mbx, msg); | |
1609 | } | |
1610 | ||
1611 | /** | |
1612 | * fm10k_get_host_state_pf - Returns the state of the switch and mailbox | |
1613 | * @hw: pointer to hardware structure | |
1614 | * @switch_ready: pointer to boolean value that will record switch state | |
1615 | * | |
d8ec92f2 | 1616 | * This function will check the DMA_CTRL2 register and mailbox in order |
401b5383 AD |
1617 | * to determine if the switch is ready for the PF to begin requesting |
1618 | * addresses and mapping traffic to the local interface. | |
1619 | **/ | |
1620 | static s32 fm10k_get_host_state_pf(struct fm10k_hw *hw, bool *switch_ready) | |
1621 | { | |
1622 | s32 ret_val = 0; | |
1623 | u32 dma_ctrl2; | |
1624 | ||
eca32047 | 1625 | /* verify the switch is ready for interaction */ |
401b5383 AD |
1626 | dma_ctrl2 = fm10k_read_reg(hw, FM10K_DMA_CTRL2); |
1627 | if (!(dma_ctrl2 & FM10K_DMA_CTRL2_SWITCH_READY)) | |
1628 | goto out; | |
1629 | ||
1630 | /* retrieve generic host state info */ | |
1631 | ret_val = fm10k_get_host_state_generic(hw, switch_ready); | |
1632 | if (ret_val) | |
1633 | goto out; | |
1634 | ||
1635 | /* interface cannot receive traffic without logical ports */ | |
1636 | if (hw->mac.dglort_map == FM10K_DGLORTMAP_NONE) | |
1637 | ret_val = fm10k_request_lport_map_pf(hw); | |
1638 | ||
1639 | out: | |
1640 | return ret_val; | |
1641 | } | |
1642 | ||
1643 | /* This structure defines the attibutes to be parsed below */ | |
1644 | const struct fm10k_tlv_attr fm10k_lport_map_msg_attr[] = { | |
a7a7783a JK |
1645 | FM10K_TLV_ATTR_LE_STRUCT(FM10K_PF_ATTR_ID_ERR, |
1646 | sizeof(struct fm10k_swapi_error)), | |
401b5383 AD |
1647 | FM10K_TLV_ATTR_U32(FM10K_PF_ATTR_ID_LPORT_MAP), |
1648 | FM10K_TLV_ATTR_LAST | |
1649 | }; | |
1650 | ||
1651 | /** | |
1652 | * fm10k_msg_lport_map_pf - Message handler for lport_map message from SM | |
1653 | * @hw: Pointer to hardware structure | |
1654 | * @results: pointer array containing parsed data | |
1655 | * @mbx: Pointer to mailbox information structure | |
1656 | * | |
1657 | * This handler configures the lport mapping based on the reply from the | |
1658 | * switch API. | |
1659 | **/ | |
1660 | s32 fm10k_msg_lport_map_pf(struct fm10k_hw *hw, u32 **results, | |
1661 | struct fm10k_mbx_info *mbx) | |
1662 | { | |
1663 | u16 glort, mask; | |
1664 | u32 dglort_map; | |
1665 | s32 err; | |
1666 | ||
1667 | err = fm10k_tlv_attr_get_u32(results[FM10K_PF_ATTR_ID_LPORT_MAP], | |
1668 | &dglort_map); | |
1669 | if (err) | |
1670 | return err; | |
1671 | ||
1672 | /* extract values out of the header */ | |
1673 | glort = FM10K_MSG_HDR_FIELD_GET(dglort_map, LPORT_MAP_GLORT); | |
1674 | mask = FM10K_MSG_HDR_FIELD_GET(dglort_map, LPORT_MAP_MASK); | |
1675 | ||
1676 | /* verify mask is set and none of the masked bits in glort are set */ | |
1677 | if (!mask || (glort & ~mask)) | |
1678 | return FM10K_ERR_PARAM; | |
1679 | ||
1680 | /* verify the mask is contiguous, and that it is 1's followed by 0's */ | |
1681 | if (((~(mask - 1) & mask) + mask) & FM10K_DGLORTMAP_NONE) | |
1682 | return FM10K_ERR_PARAM; | |
1683 | ||
1684 | /* record the glort, mask, and port count */ | |
1685 | hw->mac.dglort_map = dglort_map; | |
1686 | ||
1687 | return 0; | |
1688 | } | |
1689 | ||
1690 | const struct fm10k_tlv_attr fm10k_update_pvid_msg_attr[] = { | |
1691 | FM10K_TLV_ATTR_U32(FM10K_PF_ATTR_ID_UPDATE_PVID), | |
1692 | FM10K_TLV_ATTR_LAST | |
1693 | }; | |
1694 | ||
1695 | /** | |
1696 | * fm10k_msg_update_pvid_pf - Message handler for port VLAN message from SM | |
1697 | * @hw: Pointer to hardware structure | |
1698 | * @results: pointer array containing parsed data | |
1699 | * @mbx: Pointer to mailbox information structure | |
1700 | * | |
1701 | * This handler configures the default VLAN for the PF | |
1702 | **/ | |
bb269e8b BA |
1703 | static s32 fm10k_msg_update_pvid_pf(struct fm10k_hw *hw, u32 **results, |
1704 | struct fm10k_mbx_info *mbx) | |
401b5383 AD |
1705 | { |
1706 | u16 glort, pvid; | |
1707 | u32 pvid_update; | |
1708 | s32 err; | |
1709 | ||
1710 | err = fm10k_tlv_attr_get_u32(results[FM10K_PF_ATTR_ID_UPDATE_PVID], | |
1711 | &pvid_update); | |
1712 | if (err) | |
1713 | return err; | |
1714 | ||
1715 | /* extract values from the pvid update */ | |
1716 | glort = FM10K_MSG_HDR_FIELD_GET(pvid_update, UPDATE_PVID_GLORT); | |
1717 | pvid = FM10K_MSG_HDR_FIELD_GET(pvid_update, UPDATE_PVID_PVID); | |
1718 | ||
1719 | /* if glort is not valid return error */ | |
1720 | if (!fm10k_glort_valid_pf(hw, glort)) | |
1721 | return FM10K_ERR_PARAM; | |
1722 | ||
aa502b4a | 1723 | /* verify VLAN ID is valid */ |
401b5383 AD |
1724 | if (pvid >= FM10K_VLAN_TABLE_VID_MAX) |
1725 | return FM10K_ERR_PARAM; | |
1726 | ||
1727 | /* record the port VLAN ID value */ | |
1728 | hw->mac.default_vid = pvid; | |
1729 | ||
1730 | return 0; | |
1731 | } | |
1732 | ||
1733 | /** | |
1734 | * fm10k_record_global_table_data - Move global table data to swapi table info | |
1735 | * @from: pointer to source table data structure | |
1736 | * @to: pointer to destination table info structure | |
1737 | * | |
1738 | * This function is will copy table_data to the table_info contained in | |
1739 | * the hw struct. | |
1740 | **/ | |
1741 | static void fm10k_record_global_table_data(struct fm10k_global_table_data *from, | |
1742 | struct fm10k_swapi_table_info *to) | |
1743 | { | |
1744 | /* convert from le32 struct to CPU byte ordered values */ | |
1745 | to->used = le32_to_cpu(from->used); | |
1746 | to->avail = le32_to_cpu(from->avail); | |
1747 | } | |
1748 | ||
1749 | const struct fm10k_tlv_attr fm10k_err_msg_attr[] = { | |
1750 | FM10K_TLV_ATTR_LE_STRUCT(FM10K_PF_ATTR_ID_ERR, | |
1751 | sizeof(struct fm10k_swapi_error)), | |
1752 | FM10K_TLV_ATTR_LAST | |
1753 | }; | |
1754 | ||
1755 | /** | |
1756 | * fm10k_msg_err_pf - Message handler for error reply | |
1757 | * @hw: Pointer to hardware structure | |
1758 | * @results: pointer array containing parsed data | |
1759 | * @mbx: Pointer to mailbox information structure | |
1760 | * | |
1761 | * This handler will capture the data for any error replies to previous | |
1762 | * messages that the PF has sent. | |
1763 | **/ | |
1764 | s32 fm10k_msg_err_pf(struct fm10k_hw *hw, u32 **results, | |
1765 | struct fm10k_mbx_info *mbx) | |
1766 | { | |
1767 | struct fm10k_swapi_error err_msg; | |
1768 | s32 err; | |
1769 | ||
1770 | /* extract structure from message */ | |
1771 | err = fm10k_tlv_attr_get_le_struct(results[FM10K_PF_ATTR_ID_ERR], | |
1772 | &err_msg, sizeof(err_msg)); | |
1773 | if (err) | |
1774 | return err; | |
1775 | ||
1776 | /* record table status */ | |
1777 | fm10k_record_global_table_data(&err_msg.mac, &hw->swapi.mac); | |
1778 | fm10k_record_global_table_data(&err_msg.nexthop, &hw->swapi.nexthop); | |
1779 | fm10k_record_global_table_data(&err_msg.ffu, &hw->swapi.ffu); | |
1780 | ||
1781 | /* record SW API status value */ | |
1782 | hw->swapi.status = le32_to_cpu(err_msg.status); | |
1783 | ||
1784 | return 0; | |
1785 | } | |
1786 | ||
1787 | static const struct fm10k_msg_data fm10k_msg_data_pf[] = { | |
1788 | FM10K_PF_MSG_ERR_HANDLER(XCAST_MODES, fm10k_msg_err_pf), | |
1789 | FM10K_PF_MSG_ERR_HANDLER(UPDATE_MAC_FWD_RULE, fm10k_msg_err_pf), | |
1790 | FM10K_PF_MSG_LPORT_MAP_HANDLER(fm10k_msg_lport_map_pf), | |
1791 | FM10K_PF_MSG_ERR_HANDLER(LPORT_CREATE, fm10k_msg_err_pf), | |
1792 | FM10K_PF_MSG_ERR_HANDLER(LPORT_DELETE, fm10k_msg_err_pf), | |
1793 | FM10K_PF_MSG_UPDATE_PVID_HANDLER(fm10k_msg_update_pvid_pf), | |
1794 | FM10K_TLV_MSG_ERROR_HANDLER(fm10k_tlv_msg_error), | |
1795 | }; | |
1796 | ||
f329ad73 | 1797 | static const struct fm10k_mac_ops mac_ops_pf = { |
4e458cfb BA |
1798 | .get_bus_info = fm10k_get_bus_info_generic, |
1799 | .reset_hw = fm10k_reset_hw_pf, | |
1800 | .init_hw = fm10k_init_hw_pf, | |
1801 | .start_hw = fm10k_start_hw_generic, | |
1802 | .stop_hw = fm10k_stop_hw_generic, | |
1803 | .update_vlan = fm10k_update_vlan_pf, | |
1804 | .read_mac_addr = fm10k_read_mac_addr_pf, | |
1805 | .update_uc_addr = fm10k_update_uc_addr_pf, | |
1806 | .update_mc_addr = fm10k_update_mc_addr_pf, | |
1807 | .update_xcast_mode = fm10k_update_xcast_mode_pf, | |
1808 | .update_int_moderator = fm10k_update_int_moderator_pf, | |
1809 | .update_lport_state = fm10k_update_lport_state_pf, | |
1810 | .update_hw_stats = fm10k_update_hw_stats_pf, | |
1811 | .rebind_hw_stats = fm10k_rebind_hw_stats_pf, | |
1812 | .configure_dglort_map = fm10k_configure_dglort_map_pf, | |
1813 | .set_dma_mask = fm10k_set_dma_mask_pf, | |
1814 | .get_fault = fm10k_get_fault_pf, | |
1815 | .get_host_state = fm10k_get_host_state_pf, | |
b6fec18f AD |
1816 | }; |
1817 | ||
f329ad73 | 1818 | static const struct fm10k_iov_ops iov_ops_pf = { |
4e458cfb BA |
1819 | .assign_resources = fm10k_iov_assign_resources_pf, |
1820 | .configure_tc = fm10k_iov_configure_tc_pf, | |
1821 | .assign_int_moderator = fm10k_iov_assign_int_moderator_pf, | |
c2653865 | 1822 | .assign_default_mac_vlan = fm10k_iov_assign_default_mac_vlan_pf, |
4e458cfb BA |
1823 | .reset_resources = fm10k_iov_reset_resources_pf, |
1824 | .set_lport = fm10k_iov_set_lport_pf, | |
1825 | .reset_lport = fm10k_iov_reset_lport_pf, | |
1826 | .update_stats = fm10k_iov_update_stats_pf, | |
c2653865 AD |
1827 | }; |
1828 | ||
401b5383 AD |
1829 | static s32 fm10k_get_invariants_pf(struct fm10k_hw *hw) |
1830 | { | |
1831 | fm10k_get_invariants_generic(hw); | |
1832 | ||
1833 | return fm10k_sm_mbx_init(hw, &hw->mbx, fm10k_msg_data_pf); | |
1834 | } | |
1835 | ||
f329ad73 | 1836 | const struct fm10k_info fm10k_pf_info = { |
b6fec18f | 1837 | .mac = fm10k_mac_pf, |
4e458cfb | 1838 | .get_invariants = fm10k_get_invariants_pf, |
b6fec18f | 1839 | .mac_ops = &mac_ops_pf, |
c2653865 | 1840 | .iov_ops = &iov_ops_pf, |
b6fec18f | 1841 | }; |