Commit | Line | Data |
---|---|---|
9a799d71 AK |
1 | /******************************************************************************* |
2 | ||
3 | Intel 10 Gigabit PCI Express Linux driver | |
94971820 | 4 | Copyright(c) 1999 - 2012 Intel Corporation. |
9a799d71 AK |
5 | |
6 | This program is free software; you can redistribute it and/or modify it | |
7 | under the terms and conditions of the GNU General Public License, | |
8 | version 2, as published by the Free Software Foundation. | |
9 | ||
10 | This program is distributed in the hope it will be useful, but WITHOUT | |
11 | ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | |
12 | FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | |
13 | more details. | |
14 | ||
15 | You should have received a copy of the GNU General Public License along with | |
16 | this program; if not, write to the Free Software Foundation, Inc., | |
17 | 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. | |
18 | ||
19 | The full GNU General Public License is included in this distribution in | |
20 | the file called "COPYING". | |
21 | ||
22 | Contact Information: | |
9a799d71 AK |
23 | e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> |
24 | Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 | |
25 | ||
26 | *******************************************************************************/ | |
27 | ||
28 | #include <linux/pci.h> | |
29 | #include <linux/delay.h> | |
30 | #include <linux/sched.h> | |
ccffad25 | 31 | #include <linux/netdevice.h> |
9a799d71 | 32 | |
11afc1b1 | 33 | #include "ixgbe.h" |
9a799d71 AK |
34 | #include "ixgbe_common.h" |
35 | #include "ixgbe_phy.h" | |
36 | ||
c44ade9e | 37 | static s32 ixgbe_acquire_eeprom(struct ixgbe_hw *hw); |
9a799d71 AK |
38 | static s32 ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw); |
39 | static void ixgbe_release_eeprom_semaphore(struct ixgbe_hw *hw); | |
c44ade9e JB |
40 | static s32 ixgbe_ready_eeprom(struct ixgbe_hw *hw); |
41 | static void ixgbe_standby_eeprom(struct ixgbe_hw *hw); | |
42 | static void ixgbe_shift_out_eeprom_bits(struct ixgbe_hw *hw, u16 data, | |
43 | u16 count); | |
44 | static u16 ixgbe_shift_in_eeprom_bits(struct ixgbe_hw *hw, u16 count); | |
45 | static void ixgbe_raise_eeprom_clk(struct ixgbe_hw *hw, u32 *eec); | |
46 | static void ixgbe_lower_eeprom_clk(struct ixgbe_hw *hw, u32 *eec); | |
47 | static void ixgbe_release_eeprom(struct ixgbe_hw *hw); | |
9a799d71 | 48 | |
9a799d71 | 49 | static s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr); |
eb9c3e3e | 50 | static s32 ixgbe_poll_eerd_eewr_done(struct ixgbe_hw *hw, u32 ee_reg); |
68c7005d ET |
51 | static s32 ixgbe_read_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset, |
52 | u16 words, u16 *data); | |
53 | static s32 ixgbe_write_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset, | |
54 | u16 words, u16 *data); | |
55 | static s32 ixgbe_detect_eeprom_page_size_generic(struct ixgbe_hw *hw, | |
56 | u16 offset); | |
ff9d1a5a | 57 | static s32 ixgbe_disable_pcie_master(struct ixgbe_hw *hw); |
9a799d71 | 58 | |
67a79df2 AD |
59 | /** |
60 | * ixgbe_device_supports_autoneg_fc - Check if phy supports autoneg flow | |
61 | * control | |
62 | * @hw: pointer to hardware structure | |
63 | * | |
64 | * There are several phys that do not support autoneg flow control. This | |
65 | * function check the device id to see if the associated phy supports | |
66 | * autoneg flow control. | |
67 | **/ | |
68 | static s32 ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw) | |
69 | { | |
70 | ||
71 | switch (hw->device_id) { | |
72 | case IXGBE_DEV_ID_X540T: | |
73 | return 0; | |
74 | case IXGBE_DEV_ID_82599_T3_LOM: | |
75 | return 0; | |
76 | default: | |
77 | return IXGBE_ERR_FC_NOT_SUPPORTED; | |
78 | } | |
79 | } | |
80 | ||
81 | /** | |
82 | * ixgbe_setup_fc - Set up flow control | |
83 | * @hw: pointer to hardware structure | |
84 | * | |
85 | * Called at init time to set up flow control. | |
86 | **/ | |
041441d0 | 87 | static s32 ixgbe_setup_fc(struct ixgbe_hw *hw) |
67a79df2 AD |
88 | { |
89 | s32 ret_val = 0; | |
90 | u32 reg = 0, reg_bp = 0; | |
91 | u16 reg_cu = 0; | |
92 | ||
67a79df2 AD |
93 | /* |
94 | * Validate the requested mode. Strict IEEE mode does not allow | |
95 | * ixgbe_fc_rx_pause because it will cause us to fail at UNH. | |
96 | */ | |
97 | if (hw->fc.strict_ieee && hw->fc.requested_mode == ixgbe_fc_rx_pause) { | |
98 | hw_dbg(hw, "ixgbe_fc_rx_pause not valid in strict IEEE mode\n"); | |
99 | ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS; | |
100 | goto out; | |
101 | } | |
102 | ||
103 | /* | |
104 | * 10gig parts do not have a word in the EEPROM to determine the | |
105 | * default flow control setting, so we explicitly set it to full. | |
106 | */ | |
107 | if (hw->fc.requested_mode == ixgbe_fc_default) | |
108 | hw->fc.requested_mode = ixgbe_fc_full; | |
109 | ||
110 | /* | |
111 | * Set up the 1G and 10G flow control advertisement registers so the | |
112 | * HW will be able to do fc autoneg once the cable is plugged in. If | |
113 | * we link at 10G, the 1G advertisement is harmless and vice versa. | |
114 | */ | |
67a79df2 AD |
115 | switch (hw->phy.media_type) { |
116 | case ixgbe_media_type_fiber: | |
117 | case ixgbe_media_type_backplane: | |
118 | reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANA); | |
119 | reg_bp = IXGBE_READ_REG(hw, IXGBE_AUTOC); | |
120 | break; | |
67a79df2 AD |
121 | case ixgbe_media_type_copper: |
122 | hw->phy.ops.read_reg(hw, MDIO_AN_ADVERTISE, | |
123 | MDIO_MMD_AN, ®_cu); | |
124 | break; | |
67a79df2 | 125 | default: |
041441d0 | 126 | break; |
67a79df2 AD |
127 | } |
128 | ||
129 | /* | |
130 | * The possible values of fc.requested_mode are: | |
131 | * 0: Flow control is completely disabled | |
132 | * 1: Rx flow control is enabled (we can receive pause frames, | |
133 | * but not send pause frames). | |
134 | * 2: Tx flow control is enabled (we can send pause frames but | |
135 | * we do not support receiving pause frames). | |
136 | * 3: Both Rx and Tx flow control (symmetric) are enabled. | |
67a79df2 AD |
137 | * other: Invalid. |
138 | */ | |
139 | switch (hw->fc.requested_mode) { | |
140 | case ixgbe_fc_none: | |
141 | /* Flow control completely disabled by software override. */ | |
142 | reg &= ~(IXGBE_PCS1GANA_SYM_PAUSE | IXGBE_PCS1GANA_ASM_PAUSE); | |
143 | if (hw->phy.media_type == ixgbe_media_type_backplane) | |
144 | reg_bp &= ~(IXGBE_AUTOC_SYM_PAUSE | | |
145 | IXGBE_AUTOC_ASM_PAUSE); | |
146 | else if (hw->phy.media_type == ixgbe_media_type_copper) | |
147 | reg_cu &= ~(IXGBE_TAF_SYM_PAUSE | IXGBE_TAF_ASM_PAUSE); | |
148 | break; | |
67a79df2 AD |
149 | case ixgbe_fc_tx_pause: |
150 | /* | |
151 | * Tx Flow control is enabled, and Rx Flow control is | |
152 | * disabled by software override. | |
153 | */ | |
041441d0 AD |
154 | reg |= IXGBE_PCS1GANA_ASM_PAUSE; |
155 | reg &= ~IXGBE_PCS1GANA_SYM_PAUSE; | |
67a79df2 | 156 | if (hw->phy.media_type == ixgbe_media_type_backplane) { |
041441d0 AD |
157 | reg_bp |= IXGBE_AUTOC_ASM_PAUSE; |
158 | reg_bp &= ~IXGBE_AUTOC_SYM_PAUSE; | |
67a79df2 | 159 | } else if (hw->phy.media_type == ixgbe_media_type_copper) { |
041441d0 AD |
160 | reg_cu |= IXGBE_TAF_ASM_PAUSE; |
161 | reg_cu &= ~IXGBE_TAF_SYM_PAUSE; | |
67a79df2 AD |
162 | } |
163 | break; | |
041441d0 AD |
164 | case ixgbe_fc_rx_pause: |
165 | /* | |
166 | * Rx Flow control is enabled and Tx Flow control is | |
167 | * disabled by software override. Since there really | |
168 | * isn't a way to advertise that we are capable of RX | |
169 | * Pause ONLY, we will advertise that we support both | |
170 | * symmetric and asymmetric Rx PAUSE, as such we fall | |
171 | * through to the fc_full statement. Later, we will | |
172 | * disable the adapter's ability to send PAUSE frames. | |
173 | */ | |
67a79df2 AD |
174 | case ixgbe_fc_full: |
175 | /* Flow control (both Rx and Tx) is enabled by SW override. */ | |
041441d0 | 176 | reg |= IXGBE_PCS1GANA_SYM_PAUSE | IXGBE_PCS1GANA_ASM_PAUSE; |
67a79df2 | 177 | if (hw->phy.media_type == ixgbe_media_type_backplane) |
041441d0 AD |
178 | reg_bp |= IXGBE_AUTOC_SYM_PAUSE | |
179 | IXGBE_AUTOC_ASM_PAUSE; | |
67a79df2 | 180 | else if (hw->phy.media_type == ixgbe_media_type_copper) |
041441d0 | 181 | reg_cu |= IXGBE_TAF_SYM_PAUSE | IXGBE_TAF_ASM_PAUSE; |
67a79df2 | 182 | break; |
67a79df2 AD |
183 | default: |
184 | hw_dbg(hw, "Flow control param set incorrectly\n"); | |
185 | ret_val = IXGBE_ERR_CONFIG; | |
186 | goto out; | |
187 | break; | |
188 | } | |
189 | ||
190 | if (hw->mac.type != ixgbe_mac_X540) { | |
191 | /* | |
192 | * Enable auto-negotiation between the MAC & PHY; | |
193 | * the MAC will advertise clause 37 flow control. | |
194 | */ | |
195 | IXGBE_WRITE_REG(hw, IXGBE_PCS1GANA, reg); | |
196 | reg = IXGBE_READ_REG(hw, IXGBE_PCS1GLCTL); | |
197 | ||
198 | /* Disable AN timeout */ | |
199 | if (hw->fc.strict_ieee) | |
200 | reg &= ~IXGBE_PCS1GLCTL_AN_1G_TIMEOUT_EN; | |
201 | ||
202 | IXGBE_WRITE_REG(hw, IXGBE_PCS1GLCTL, reg); | |
203 | hw_dbg(hw, "Set up FC; PCS1GLCTL = 0x%08X\n", reg); | |
204 | } | |
205 | ||
206 | /* | |
207 | * AUTOC restart handles negotiation of 1G and 10G on backplane | |
208 | * and copper. There is no need to set the PCS1GCTL register. | |
209 | * | |
210 | */ | |
211 | if (hw->phy.media_type == ixgbe_media_type_backplane) { | |
212 | reg_bp |= IXGBE_AUTOC_AN_RESTART; | |
213 | IXGBE_WRITE_REG(hw, IXGBE_AUTOC, reg_bp); | |
214 | } else if ((hw->phy.media_type == ixgbe_media_type_copper) && | |
215 | (ixgbe_device_supports_autoneg_fc(hw) == 0)) { | |
216 | hw->phy.ops.write_reg(hw, MDIO_AN_ADVERTISE, | |
217 | MDIO_MMD_AN, reg_cu); | |
218 | } | |
219 | ||
220 | hw_dbg(hw, "Set up FC; IXGBE_AUTOC = 0x%08X\n", reg); | |
221 | out: | |
222 | return ret_val; | |
223 | } | |
224 | ||
9a799d71 | 225 | /** |
c44ade9e | 226 | * ixgbe_start_hw_generic - Prepare hardware for Tx/Rx |
9a799d71 AK |
227 | * @hw: pointer to hardware structure |
228 | * | |
229 | * Starts the hardware by filling the bus info structure and media type, clears | |
230 | * all on chip counters, initializes receive address registers, multicast | |
231 | * table, VLAN filter table, calls routine to set up link and flow control | |
232 | * settings, and leaves transmit and receive units disabled and uninitialized | |
233 | **/ | |
c44ade9e | 234 | s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw) |
9a799d71 AK |
235 | { |
236 | u32 ctrl_ext; | |
237 | ||
238 | /* Set the media type */ | |
239 | hw->phy.media_type = hw->mac.ops.get_media_type(hw); | |
240 | ||
241 | /* Identify the PHY */ | |
c44ade9e | 242 | hw->phy.ops.identify(hw); |
9a799d71 | 243 | |
9a799d71 | 244 | /* Clear the VLAN filter table */ |
c44ade9e | 245 | hw->mac.ops.clear_vfta(hw); |
9a799d71 | 246 | |
9a799d71 | 247 | /* Clear statistics registers */ |
c44ade9e | 248 | hw->mac.ops.clear_hw_cntrs(hw); |
9a799d71 AK |
249 | |
250 | /* Set No Snoop Disable */ | |
251 | ctrl_ext = IXGBE_READ_REG(hw, IXGBE_CTRL_EXT); | |
252 | ctrl_ext |= IXGBE_CTRL_EXT_NS_DIS; | |
253 | IXGBE_WRITE_REG(hw, IXGBE_CTRL_EXT, ctrl_ext); | |
3957d63d | 254 | IXGBE_WRITE_FLUSH(hw); |
9a799d71 | 255 | |
620fa036 | 256 | /* Setup flow control */ |
041441d0 | 257 | ixgbe_setup_fc(hw); |
620fa036 | 258 | |
9a799d71 AK |
259 | /* Clear adapter stopped flag */ |
260 | hw->adapter_stopped = false; | |
261 | ||
262 | return 0; | |
263 | } | |
264 | ||
7184b7cf ET |
265 | /** |
266 | * ixgbe_start_hw_gen2 - Init sequence for common device family | |
267 | * @hw: pointer to hw structure | |
268 | * | |
269 | * Performs the init sequence common to the second generation | |
270 | * of 10 GbE devices. | |
271 | * Devices in the second generation: | |
272 | * 82599 | |
273 | * X540 | |
274 | **/ | |
275 | s32 ixgbe_start_hw_gen2(struct ixgbe_hw *hw) | |
276 | { | |
277 | u32 i; | |
3d5c5207 | 278 | u32 regval; |
7184b7cf ET |
279 | |
280 | /* Clear the rate limiters */ | |
281 | for (i = 0; i < hw->mac.max_tx_queues; i++) { | |
282 | IXGBE_WRITE_REG(hw, IXGBE_RTTDQSEL, i); | |
283 | IXGBE_WRITE_REG(hw, IXGBE_RTTBCNRC, 0); | |
284 | } | |
285 | IXGBE_WRITE_FLUSH(hw); | |
286 | ||
3d5c5207 ET |
287 | /* Disable relaxed ordering */ |
288 | for (i = 0; i < hw->mac.max_tx_queues; i++) { | |
289 | regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL_82599(i)); | |
bdda1a61 | 290 | regval &= ~IXGBE_DCA_TXCTRL_DESC_WRO_EN; |
3d5c5207 ET |
291 | IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL_82599(i), regval); |
292 | } | |
293 | ||
294 | for (i = 0; i < hw->mac.max_rx_queues; i++) { | |
295 | regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i)); | |
bdda1a61 AD |
296 | regval &= ~(IXGBE_DCA_RXCTRL_DATA_WRO_EN | |
297 | IXGBE_DCA_RXCTRL_HEAD_WRO_EN); | |
3d5c5207 ET |
298 | IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval); |
299 | } | |
300 | ||
7184b7cf ET |
301 | return 0; |
302 | } | |
303 | ||
9a799d71 | 304 | /** |
c44ade9e | 305 | * ixgbe_init_hw_generic - Generic hardware initialization |
9a799d71 AK |
306 | * @hw: pointer to hardware structure |
307 | * | |
c44ade9e | 308 | * Initialize the hardware by resetting the hardware, filling the bus info |
9a799d71 AK |
309 | * structure and media type, clears all on chip counters, initializes receive |
310 | * address registers, multicast table, VLAN filter table, calls routine to set | |
311 | * up link and flow control settings, and leaves transmit and receive units | |
312 | * disabled and uninitialized | |
313 | **/ | |
c44ade9e | 314 | s32 ixgbe_init_hw_generic(struct ixgbe_hw *hw) |
9a799d71 | 315 | { |
794caeb2 PWJ |
316 | s32 status; |
317 | ||
9a799d71 | 318 | /* Reset the hardware */ |
794caeb2 | 319 | status = hw->mac.ops.reset_hw(hw); |
9a799d71 | 320 | |
794caeb2 PWJ |
321 | if (status == 0) { |
322 | /* Start the HW */ | |
323 | status = hw->mac.ops.start_hw(hw); | |
324 | } | |
9a799d71 | 325 | |
794caeb2 | 326 | return status; |
9a799d71 AK |
327 | } |
328 | ||
329 | /** | |
c44ade9e | 330 | * ixgbe_clear_hw_cntrs_generic - Generic clear hardware counters |
9a799d71 AK |
331 | * @hw: pointer to hardware structure |
332 | * | |
333 | * Clears all hardware statistics counters by reading them from the hardware | |
334 | * Statistics counters are clear on read. | |
335 | **/ | |
c44ade9e | 336 | s32 ixgbe_clear_hw_cntrs_generic(struct ixgbe_hw *hw) |
9a799d71 AK |
337 | { |
338 | u16 i = 0; | |
339 | ||
340 | IXGBE_READ_REG(hw, IXGBE_CRCERRS); | |
341 | IXGBE_READ_REG(hw, IXGBE_ILLERRC); | |
342 | IXGBE_READ_REG(hw, IXGBE_ERRBC); | |
343 | IXGBE_READ_REG(hw, IXGBE_MSPDC); | |
344 | for (i = 0; i < 8; i++) | |
345 | IXGBE_READ_REG(hw, IXGBE_MPC(i)); | |
346 | ||
347 | IXGBE_READ_REG(hw, IXGBE_MLFC); | |
348 | IXGBE_READ_REG(hw, IXGBE_MRFC); | |
349 | IXGBE_READ_REG(hw, IXGBE_RLEC); | |
350 | IXGBE_READ_REG(hw, IXGBE_LXONTXC); | |
9a799d71 | 351 | IXGBE_READ_REG(hw, IXGBE_LXOFFTXC); |
667c7565 ET |
352 | if (hw->mac.type >= ixgbe_mac_82599EB) { |
353 | IXGBE_READ_REG(hw, IXGBE_LXONRXCNT); | |
354 | IXGBE_READ_REG(hw, IXGBE_LXOFFRXCNT); | |
355 | } else { | |
356 | IXGBE_READ_REG(hw, IXGBE_LXONRXC); | |
357 | IXGBE_READ_REG(hw, IXGBE_LXOFFRXC); | |
358 | } | |
9a799d71 AK |
359 | |
360 | for (i = 0; i < 8; i++) { | |
361 | IXGBE_READ_REG(hw, IXGBE_PXONTXC(i)); | |
9a799d71 | 362 | IXGBE_READ_REG(hw, IXGBE_PXOFFTXC(i)); |
667c7565 ET |
363 | if (hw->mac.type >= ixgbe_mac_82599EB) { |
364 | IXGBE_READ_REG(hw, IXGBE_PXONRXCNT(i)); | |
365 | IXGBE_READ_REG(hw, IXGBE_PXOFFRXCNT(i)); | |
366 | } else { | |
367 | IXGBE_READ_REG(hw, IXGBE_PXONRXC(i)); | |
368 | IXGBE_READ_REG(hw, IXGBE_PXOFFRXC(i)); | |
369 | } | |
9a799d71 | 370 | } |
667c7565 ET |
371 | if (hw->mac.type >= ixgbe_mac_82599EB) |
372 | for (i = 0; i < 8; i++) | |
373 | IXGBE_READ_REG(hw, IXGBE_PXON2OFFCNT(i)); | |
9a799d71 AK |
374 | IXGBE_READ_REG(hw, IXGBE_PRC64); |
375 | IXGBE_READ_REG(hw, IXGBE_PRC127); | |
376 | IXGBE_READ_REG(hw, IXGBE_PRC255); | |
377 | IXGBE_READ_REG(hw, IXGBE_PRC511); | |
378 | IXGBE_READ_REG(hw, IXGBE_PRC1023); | |
379 | IXGBE_READ_REG(hw, IXGBE_PRC1522); | |
380 | IXGBE_READ_REG(hw, IXGBE_GPRC); | |
381 | IXGBE_READ_REG(hw, IXGBE_BPRC); | |
382 | IXGBE_READ_REG(hw, IXGBE_MPRC); | |
383 | IXGBE_READ_REG(hw, IXGBE_GPTC); | |
384 | IXGBE_READ_REG(hw, IXGBE_GORCL); | |
385 | IXGBE_READ_REG(hw, IXGBE_GORCH); | |
386 | IXGBE_READ_REG(hw, IXGBE_GOTCL); | |
387 | IXGBE_READ_REG(hw, IXGBE_GOTCH); | |
f3116f62 ET |
388 | if (hw->mac.type == ixgbe_mac_82598EB) |
389 | for (i = 0; i < 8; i++) | |
390 | IXGBE_READ_REG(hw, IXGBE_RNBC(i)); | |
9a799d71 AK |
391 | IXGBE_READ_REG(hw, IXGBE_RUC); |
392 | IXGBE_READ_REG(hw, IXGBE_RFC); | |
393 | IXGBE_READ_REG(hw, IXGBE_ROC); | |
394 | IXGBE_READ_REG(hw, IXGBE_RJC); | |
395 | IXGBE_READ_REG(hw, IXGBE_MNGPRC); | |
396 | IXGBE_READ_REG(hw, IXGBE_MNGPDC); | |
397 | IXGBE_READ_REG(hw, IXGBE_MNGPTC); | |
398 | IXGBE_READ_REG(hw, IXGBE_TORL); | |
399 | IXGBE_READ_REG(hw, IXGBE_TORH); | |
400 | IXGBE_READ_REG(hw, IXGBE_TPR); | |
401 | IXGBE_READ_REG(hw, IXGBE_TPT); | |
402 | IXGBE_READ_REG(hw, IXGBE_PTC64); | |
403 | IXGBE_READ_REG(hw, IXGBE_PTC127); | |
404 | IXGBE_READ_REG(hw, IXGBE_PTC255); | |
405 | IXGBE_READ_REG(hw, IXGBE_PTC511); | |
406 | IXGBE_READ_REG(hw, IXGBE_PTC1023); | |
407 | IXGBE_READ_REG(hw, IXGBE_PTC1522); | |
408 | IXGBE_READ_REG(hw, IXGBE_MPTC); | |
409 | IXGBE_READ_REG(hw, IXGBE_BPTC); | |
410 | for (i = 0; i < 16; i++) { | |
411 | IXGBE_READ_REG(hw, IXGBE_QPRC(i)); | |
9a799d71 | 412 | IXGBE_READ_REG(hw, IXGBE_QPTC(i)); |
667c7565 ET |
413 | if (hw->mac.type >= ixgbe_mac_82599EB) { |
414 | IXGBE_READ_REG(hw, IXGBE_QBRC_L(i)); | |
415 | IXGBE_READ_REG(hw, IXGBE_QBRC_H(i)); | |
416 | IXGBE_READ_REG(hw, IXGBE_QBTC_L(i)); | |
417 | IXGBE_READ_REG(hw, IXGBE_QBTC_H(i)); | |
418 | IXGBE_READ_REG(hw, IXGBE_QPRDC(i)); | |
419 | } else { | |
420 | IXGBE_READ_REG(hw, IXGBE_QBRC(i)); | |
421 | IXGBE_READ_REG(hw, IXGBE_QBTC(i)); | |
422 | } | |
9a799d71 AK |
423 | } |
424 | ||
a3aeea0e ET |
425 | if (hw->mac.type == ixgbe_mac_X540) { |
426 | if (hw->phy.id == 0) | |
427 | hw->phy.ops.identify(hw); | |
c1085b10 ET |
428 | hw->phy.ops.read_reg(hw, IXGBE_PCRC8ECL, MDIO_MMD_PCS, &i); |
429 | hw->phy.ops.read_reg(hw, IXGBE_PCRC8ECH, MDIO_MMD_PCS, &i); | |
430 | hw->phy.ops.read_reg(hw, IXGBE_LDPCECL, MDIO_MMD_PCS, &i); | |
431 | hw->phy.ops.read_reg(hw, IXGBE_LDPCECH, MDIO_MMD_PCS, &i); | |
a3aeea0e ET |
432 | } |
433 | ||
9a799d71 AK |
434 | return 0; |
435 | } | |
436 | ||
437 | /** | |
289700db | 438 | * ixgbe_read_pba_string_generic - Reads part number string from EEPROM |
c44ade9e | 439 | * @hw: pointer to hardware structure |
289700db DS |
440 | * @pba_num: stores the part number string from the EEPROM |
441 | * @pba_num_size: part number string buffer length | |
c44ade9e | 442 | * |
289700db | 443 | * Reads the part number string from the EEPROM. |
c44ade9e | 444 | **/ |
289700db DS |
445 | s32 ixgbe_read_pba_string_generic(struct ixgbe_hw *hw, u8 *pba_num, |
446 | u32 pba_num_size) | |
c44ade9e JB |
447 | { |
448 | s32 ret_val; | |
449 | u16 data; | |
289700db DS |
450 | u16 pba_ptr; |
451 | u16 offset; | |
452 | u16 length; | |
453 | ||
454 | if (pba_num == NULL) { | |
455 | hw_dbg(hw, "PBA string buffer was null\n"); | |
456 | return IXGBE_ERR_INVALID_ARGUMENT; | |
457 | } | |
c44ade9e JB |
458 | |
459 | ret_val = hw->eeprom.ops.read(hw, IXGBE_PBANUM0_PTR, &data); | |
460 | if (ret_val) { | |
461 | hw_dbg(hw, "NVM Read Error\n"); | |
462 | return ret_val; | |
463 | } | |
c44ade9e | 464 | |
289700db | 465 | ret_val = hw->eeprom.ops.read(hw, IXGBE_PBANUM1_PTR, &pba_ptr); |
c44ade9e JB |
466 | if (ret_val) { |
467 | hw_dbg(hw, "NVM Read Error\n"); | |
468 | return ret_val; | |
469 | } | |
289700db DS |
470 | |
471 | /* | |
472 | * if data is not ptr guard the PBA must be in legacy format which | |
473 | * means pba_ptr is actually our second data word for the PBA number | |
474 | * and we can decode it into an ascii string | |
475 | */ | |
476 | if (data != IXGBE_PBANUM_PTR_GUARD) { | |
477 | hw_dbg(hw, "NVM PBA number is not stored as string\n"); | |
478 | ||
479 | /* we will need 11 characters to store the PBA */ | |
480 | if (pba_num_size < 11) { | |
481 | hw_dbg(hw, "PBA string buffer too small\n"); | |
482 | return IXGBE_ERR_NO_SPACE; | |
483 | } | |
484 | ||
485 | /* extract hex string from data and pba_ptr */ | |
486 | pba_num[0] = (data >> 12) & 0xF; | |
487 | pba_num[1] = (data >> 8) & 0xF; | |
488 | pba_num[2] = (data >> 4) & 0xF; | |
489 | pba_num[3] = data & 0xF; | |
490 | pba_num[4] = (pba_ptr >> 12) & 0xF; | |
491 | pba_num[5] = (pba_ptr >> 8) & 0xF; | |
492 | pba_num[6] = '-'; | |
493 | pba_num[7] = 0; | |
494 | pba_num[8] = (pba_ptr >> 4) & 0xF; | |
495 | pba_num[9] = pba_ptr & 0xF; | |
496 | ||
497 | /* put a null character on the end of our string */ | |
498 | pba_num[10] = '\0'; | |
499 | ||
500 | /* switch all the data but the '-' to hex char */ | |
501 | for (offset = 0; offset < 10; offset++) { | |
502 | if (pba_num[offset] < 0xA) | |
503 | pba_num[offset] += '0'; | |
504 | else if (pba_num[offset] < 0x10) | |
505 | pba_num[offset] += 'A' - 0xA; | |
506 | } | |
507 | ||
508 | return 0; | |
509 | } | |
510 | ||
511 | ret_val = hw->eeprom.ops.read(hw, pba_ptr, &length); | |
512 | if (ret_val) { | |
513 | hw_dbg(hw, "NVM Read Error\n"); | |
514 | return ret_val; | |
515 | } | |
516 | ||
517 | if (length == 0xFFFF || length == 0) { | |
518 | hw_dbg(hw, "NVM PBA number section invalid length\n"); | |
519 | return IXGBE_ERR_PBA_SECTION; | |
520 | } | |
521 | ||
522 | /* check if pba_num buffer is big enough */ | |
523 | if (pba_num_size < (((u32)length * 2) - 1)) { | |
524 | hw_dbg(hw, "PBA string buffer too small\n"); | |
525 | return IXGBE_ERR_NO_SPACE; | |
526 | } | |
527 | ||
528 | /* trim pba length from start of string */ | |
529 | pba_ptr++; | |
530 | length--; | |
531 | ||
532 | for (offset = 0; offset < length; offset++) { | |
533 | ret_val = hw->eeprom.ops.read(hw, pba_ptr + offset, &data); | |
534 | if (ret_val) { | |
535 | hw_dbg(hw, "NVM Read Error\n"); | |
536 | return ret_val; | |
537 | } | |
538 | pba_num[offset * 2] = (u8)(data >> 8); | |
539 | pba_num[(offset * 2) + 1] = (u8)(data & 0xFF); | |
540 | } | |
541 | pba_num[offset * 2] = '\0'; | |
c44ade9e JB |
542 | |
543 | return 0; | |
544 | } | |
545 | ||
546 | /** | |
547 | * ixgbe_get_mac_addr_generic - Generic get MAC address | |
9a799d71 AK |
548 | * @hw: pointer to hardware structure |
549 | * @mac_addr: Adapter MAC address | |
550 | * | |
551 | * Reads the adapter's MAC address from first Receive Address Register (RAR0) | |
552 | * A reset of the adapter must be performed prior to calling this function | |
553 | * in order for the MAC address to have been loaded from the EEPROM into RAR0 | |
554 | **/ | |
c44ade9e | 555 | s32 ixgbe_get_mac_addr_generic(struct ixgbe_hw *hw, u8 *mac_addr) |
9a799d71 AK |
556 | { |
557 | u32 rar_high; | |
558 | u32 rar_low; | |
559 | u16 i; | |
560 | ||
561 | rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(0)); | |
562 | rar_low = IXGBE_READ_REG(hw, IXGBE_RAL(0)); | |
563 | ||
564 | for (i = 0; i < 4; i++) | |
565 | mac_addr[i] = (u8)(rar_low >> (i*8)); | |
566 | ||
567 | for (i = 0; i < 2; i++) | |
568 | mac_addr[i+4] = (u8)(rar_high >> (i*8)); | |
569 | ||
570 | return 0; | |
571 | } | |
572 | ||
11afc1b1 PW |
573 | /** |
574 | * ixgbe_get_bus_info_generic - Generic set PCI bus info | |
575 | * @hw: pointer to hardware structure | |
576 | * | |
577 | * Sets the PCI bus info (speed, width, type) within the ixgbe_hw structure | |
578 | **/ | |
579 | s32 ixgbe_get_bus_info_generic(struct ixgbe_hw *hw) | |
580 | { | |
581 | struct ixgbe_adapter *adapter = hw->back; | |
582 | struct ixgbe_mac_info *mac = &hw->mac; | |
583 | u16 link_status; | |
584 | ||
585 | hw->bus.type = ixgbe_bus_type_pci_express; | |
586 | ||
587 | /* Get the negotiated link width and speed from PCI config space */ | |
588 | pci_read_config_word(adapter->pdev, IXGBE_PCI_LINK_STATUS, | |
589 | &link_status); | |
590 | ||
591 | switch (link_status & IXGBE_PCI_LINK_WIDTH) { | |
592 | case IXGBE_PCI_LINK_WIDTH_1: | |
593 | hw->bus.width = ixgbe_bus_width_pcie_x1; | |
594 | break; | |
595 | case IXGBE_PCI_LINK_WIDTH_2: | |
596 | hw->bus.width = ixgbe_bus_width_pcie_x2; | |
597 | break; | |
598 | case IXGBE_PCI_LINK_WIDTH_4: | |
599 | hw->bus.width = ixgbe_bus_width_pcie_x4; | |
600 | break; | |
601 | case IXGBE_PCI_LINK_WIDTH_8: | |
602 | hw->bus.width = ixgbe_bus_width_pcie_x8; | |
603 | break; | |
604 | default: | |
605 | hw->bus.width = ixgbe_bus_width_unknown; | |
606 | break; | |
607 | } | |
608 | ||
609 | switch (link_status & IXGBE_PCI_LINK_SPEED) { | |
610 | case IXGBE_PCI_LINK_SPEED_2500: | |
611 | hw->bus.speed = ixgbe_bus_speed_2500; | |
612 | break; | |
613 | case IXGBE_PCI_LINK_SPEED_5000: | |
614 | hw->bus.speed = ixgbe_bus_speed_5000; | |
615 | break; | |
616 | default: | |
617 | hw->bus.speed = ixgbe_bus_speed_unknown; | |
618 | break; | |
619 | } | |
620 | ||
621 | mac->ops.set_lan_id(hw); | |
622 | ||
623 | return 0; | |
624 | } | |
625 | ||
626 | /** | |
627 | * ixgbe_set_lan_id_multi_port_pcie - Set LAN id for PCIe multiple port devices | |
628 | * @hw: pointer to the HW structure | |
629 | * | |
630 | * Determines the LAN function id by reading memory-mapped registers | |
631 | * and swaps the port value if requested. | |
632 | **/ | |
633 | void ixgbe_set_lan_id_multi_port_pcie(struct ixgbe_hw *hw) | |
634 | { | |
635 | struct ixgbe_bus_info *bus = &hw->bus; | |
636 | u32 reg; | |
637 | ||
638 | reg = IXGBE_READ_REG(hw, IXGBE_STATUS); | |
639 | bus->func = (reg & IXGBE_STATUS_LAN_ID) >> IXGBE_STATUS_LAN_ID_SHIFT; | |
640 | bus->lan_id = bus->func; | |
641 | ||
642 | /* check for a port swap */ | |
643 | reg = IXGBE_READ_REG(hw, IXGBE_FACTPS); | |
644 | if (reg & IXGBE_FACTPS_LFS) | |
645 | bus->func ^= 0x1; | |
646 | } | |
647 | ||
9a799d71 | 648 | /** |
c44ade9e | 649 | * ixgbe_stop_adapter_generic - Generic stop Tx/Rx units |
9a799d71 AK |
650 | * @hw: pointer to hardware structure |
651 | * | |
652 | * Sets the adapter_stopped flag within ixgbe_hw struct. Clears interrupts, | |
653 | * disables transmit and receive units. The adapter_stopped flag is used by | |
654 | * the shared code and drivers to determine if the adapter is in a stopped | |
655 | * state and should not touch the hardware. | |
656 | **/ | |
c44ade9e | 657 | s32 ixgbe_stop_adapter_generic(struct ixgbe_hw *hw) |
9a799d71 | 658 | { |
9a799d71 AK |
659 | u32 reg_val; |
660 | u16 i; | |
661 | ||
662 | /* | |
663 | * Set the adapter_stopped flag so other driver functions stop touching | |
664 | * the hardware | |
665 | */ | |
666 | hw->adapter_stopped = true; | |
667 | ||
668 | /* Disable the receive unit */ | |
ff9d1a5a | 669 | IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, 0); |
9a799d71 | 670 | |
ff9d1a5a | 671 | /* Clear interrupt mask to stop interrupts from being generated */ |
9a799d71 AK |
672 | IXGBE_WRITE_REG(hw, IXGBE_EIMC, IXGBE_IRQ_CLEAR_MASK); |
673 | ||
ff9d1a5a | 674 | /* Clear any pending interrupts, flush previous writes */ |
9a799d71 AK |
675 | IXGBE_READ_REG(hw, IXGBE_EICR); |
676 | ||
677 | /* Disable the transmit unit. Each queue must be disabled. */ | |
ff9d1a5a ET |
678 | for (i = 0; i < hw->mac.max_tx_queues; i++) |
679 | IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(i), IXGBE_TXDCTL_SWFLSH); | |
680 | ||
681 | /* Disable the receive unit by stopping each queue */ | |
682 | for (i = 0; i < hw->mac.max_rx_queues; i++) { | |
683 | reg_val = IXGBE_READ_REG(hw, IXGBE_RXDCTL(i)); | |
684 | reg_val &= ~IXGBE_RXDCTL_ENABLE; | |
685 | reg_val |= IXGBE_RXDCTL_SWFLSH; | |
686 | IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(i), reg_val); | |
9a799d71 AK |
687 | } |
688 | ||
ff9d1a5a ET |
689 | /* flush all queues disables */ |
690 | IXGBE_WRITE_FLUSH(hw); | |
691 | usleep_range(1000, 2000); | |
692 | ||
c44ade9e JB |
693 | /* |
694 | * Prevent the PCI-E bus from from hanging by disabling PCI-E master | |
695 | * access and verify no pending requests | |
696 | */ | |
ff9d1a5a | 697 | return ixgbe_disable_pcie_master(hw); |
9a799d71 AK |
698 | } |
699 | ||
700 | /** | |
c44ade9e | 701 | * ixgbe_led_on_generic - Turns on the software controllable LEDs. |
9a799d71 AK |
702 | * @hw: pointer to hardware structure |
703 | * @index: led number to turn on | |
704 | **/ | |
c44ade9e | 705 | s32 ixgbe_led_on_generic(struct ixgbe_hw *hw, u32 index) |
9a799d71 AK |
706 | { |
707 | u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); | |
708 | ||
709 | /* To turn on the LED, set mode to ON. */ | |
710 | led_reg &= ~IXGBE_LED_MODE_MASK(index); | |
711 | led_reg |= IXGBE_LED_ON << IXGBE_LED_MODE_SHIFT(index); | |
712 | IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg); | |
3957d63d | 713 | IXGBE_WRITE_FLUSH(hw); |
9a799d71 AK |
714 | |
715 | return 0; | |
716 | } | |
717 | ||
718 | /** | |
c44ade9e | 719 | * ixgbe_led_off_generic - Turns off the software controllable LEDs. |
9a799d71 AK |
720 | * @hw: pointer to hardware structure |
721 | * @index: led number to turn off | |
722 | **/ | |
c44ade9e | 723 | s32 ixgbe_led_off_generic(struct ixgbe_hw *hw, u32 index) |
9a799d71 AK |
724 | { |
725 | u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); | |
726 | ||
727 | /* To turn off the LED, set mode to OFF. */ | |
728 | led_reg &= ~IXGBE_LED_MODE_MASK(index); | |
729 | led_reg |= IXGBE_LED_OFF << IXGBE_LED_MODE_SHIFT(index); | |
730 | IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg); | |
3957d63d | 731 | IXGBE_WRITE_FLUSH(hw); |
9a799d71 AK |
732 | |
733 | return 0; | |
734 | } | |
735 | ||
9a799d71 | 736 | /** |
c44ade9e | 737 | * ixgbe_init_eeprom_params_generic - Initialize EEPROM params |
9a799d71 AK |
738 | * @hw: pointer to hardware structure |
739 | * | |
740 | * Initializes the EEPROM parameters ixgbe_eeprom_info within the | |
741 | * ixgbe_hw struct in order to set up EEPROM access. | |
742 | **/ | |
c44ade9e | 743 | s32 ixgbe_init_eeprom_params_generic(struct ixgbe_hw *hw) |
9a799d71 AK |
744 | { |
745 | struct ixgbe_eeprom_info *eeprom = &hw->eeprom; | |
746 | u32 eec; | |
747 | u16 eeprom_size; | |
748 | ||
749 | if (eeprom->type == ixgbe_eeprom_uninitialized) { | |
750 | eeprom->type = ixgbe_eeprom_none; | |
c44ade9e JB |
751 | /* Set default semaphore delay to 10ms which is a well |
752 | * tested value */ | |
753 | eeprom->semaphore_delay = 10; | |
68c7005d ET |
754 | /* Clear EEPROM page size, it will be initialized as needed */ |
755 | eeprom->word_page_size = 0; | |
9a799d71 AK |
756 | |
757 | /* | |
758 | * Check for EEPROM present first. | |
759 | * If not present leave as none | |
760 | */ | |
761 | eec = IXGBE_READ_REG(hw, IXGBE_EEC); | |
762 | if (eec & IXGBE_EEC_PRES) { | |
763 | eeprom->type = ixgbe_eeprom_spi; | |
764 | ||
765 | /* | |
766 | * SPI EEPROM is assumed here. This code would need to | |
767 | * change if a future EEPROM is not SPI. | |
768 | */ | |
769 | eeprom_size = (u16)((eec & IXGBE_EEC_SIZE) >> | |
770 | IXGBE_EEC_SIZE_SHIFT); | |
771 | eeprom->word_size = 1 << (eeprom_size + | |
772 | IXGBE_EEPROM_WORD_SIZE_SHIFT); | |
773 | } | |
774 | ||
775 | if (eec & IXGBE_EEC_ADDR_SIZE) | |
776 | eeprom->address_bits = 16; | |
777 | else | |
778 | eeprom->address_bits = 8; | |
779 | hw_dbg(hw, "Eeprom params: type = %d, size = %d, address bits: " | |
780 | "%d\n", eeprom->type, eeprom->word_size, | |
781 | eeprom->address_bits); | |
782 | } | |
783 | ||
784 | return 0; | |
785 | } | |
786 | ||
11afc1b1 | 787 | /** |
68c7005d | 788 | * ixgbe_write_eeprom_buffer_bit_bang_generic - Write EEPROM using bit-bang |
11afc1b1 | 789 | * @hw: pointer to hardware structure |
68c7005d ET |
790 | * @offset: offset within the EEPROM to write |
791 | * @words: number of words | |
792 | * @data: 16 bit word(s) to write to EEPROM | |
11afc1b1 | 793 | * |
68c7005d | 794 | * Reads 16 bit word(s) from EEPROM through bit-bang method |
11afc1b1 | 795 | **/ |
68c7005d ET |
796 | s32 ixgbe_write_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset, |
797 | u16 words, u16 *data) | |
11afc1b1 | 798 | { |
68c7005d ET |
799 | s32 status = 0; |
800 | u16 i, count; | |
11afc1b1 PW |
801 | |
802 | hw->eeprom.ops.init_params(hw); | |
803 | ||
68c7005d ET |
804 | if (words == 0) { |
805 | status = IXGBE_ERR_INVALID_ARGUMENT; | |
806 | goto out; | |
807 | } | |
808 | ||
809 | if (offset + words > hw->eeprom.word_size) { | |
11afc1b1 PW |
810 | status = IXGBE_ERR_EEPROM; |
811 | goto out; | |
812 | } | |
813 | ||
68c7005d ET |
814 | /* |
815 | * The EEPROM page size cannot be queried from the chip. We do lazy | |
816 | * initialization. It is worth to do that when we write large buffer. | |
817 | */ | |
818 | if ((hw->eeprom.word_page_size == 0) && | |
819 | (words > IXGBE_EEPROM_PAGE_SIZE_MAX)) | |
820 | ixgbe_detect_eeprom_page_size_generic(hw, offset); | |
821 | ||
822 | /* | |
823 | * We cannot hold synchronization semaphores for too long | |
824 | * to avoid other entity starvation. However it is more efficient | |
825 | * to read in bursts than synchronizing access for each word. | |
826 | */ | |
827 | for (i = 0; i < words; i += IXGBE_EEPROM_RD_BUFFER_MAX_COUNT) { | |
828 | count = (words - i) / IXGBE_EEPROM_RD_BUFFER_MAX_COUNT > 0 ? | |
829 | IXGBE_EEPROM_RD_BUFFER_MAX_COUNT : (words - i); | |
830 | status = ixgbe_write_eeprom_buffer_bit_bang(hw, offset + i, | |
831 | count, &data[i]); | |
832 | ||
833 | if (status != 0) | |
834 | break; | |
835 | } | |
836 | ||
837 | out: | |
838 | return status; | |
839 | } | |
840 | ||
841 | /** | |
842 | * ixgbe_write_eeprom_buffer_bit_bang - Writes 16 bit word(s) to EEPROM | |
843 | * @hw: pointer to hardware structure | |
844 | * @offset: offset within the EEPROM to be written to | |
845 | * @words: number of word(s) | |
846 | * @data: 16 bit word(s) to be written to the EEPROM | |
847 | * | |
848 | * If ixgbe_eeprom_update_checksum is not called after this function, the | |
849 | * EEPROM will most likely contain an invalid checksum. | |
850 | **/ | |
851 | static s32 ixgbe_write_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset, | |
852 | u16 words, u16 *data) | |
853 | { | |
854 | s32 status; | |
855 | u16 word; | |
856 | u16 page_size; | |
857 | u16 i; | |
858 | u8 write_opcode = IXGBE_EEPROM_WRITE_OPCODE_SPI; | |
859 | ||
11afc1b1 PW |
860 | /* Prepare the EEPROM for writing */ |
861 | status = ixgbe_acquire_eeprom(hw); | |
862 | ||
863 | if (status == 0) { | |
864 | if (ixgbe_ready_eeprom(hw) != 0) { | |
865 | ixgbe_release_eeprom(hw); | |
866 | status = IXGBE_ERR_EEPROM; | |
867 | } | |
868 | } | |
869 | ||
870 | if (status == 0) { | |
68c7005d ET |
871 | for (i = 0; i < words; i++) { |
872 | ixgbe_standby_eeprom(hw); | |
11afc1b1 | 873 | |
68c7005d ET |
874 | /* Send the WRITE ENABLE command (8 bit opcode ) */ |
875 | ixgbe_shift_out_eeprom_bits(hw, | |
876 | IXGBE_EEPROM_WREN_OPCODE_SPI, | |
877 | IXGBE_EEPROM_OPCODE_BITS); | |
11afc1b1 | 878 | |
68c7005d | 879 | ixgbe_standby_eeprom(hw); |
11afc1b1 | 880 | |
68c7005d ET |
881 | /* |
882 | * Some SPI eeproms use the 8th address bit embedded | |
883 | * in the opcode | |
884 | */ | |
885 | if ((hw->eeprom.address_bits == 8) && | |
886 | ((offset + i) >= 128)) | |
887 | write_opcode |= IXGBE_EEPROM_A8_OPCODE_SPI; | |
888 | ||
889 | /* Send the Write command (8-bit opcode + addr) */ | |
890 | ixgbe_shift_out_eeprom_bits(hw, write_opcode, | |
891 | IXGBE_EEPROM_OPCODE_BITS); | |
892 | ixgbe_shift_out_eeprom_bits(hw, (u16)((offset + i) * 2), | |
893 | hw->eeprom.address_bits); | |
894 | ||
895 | page_size = hw->eeprom.word_page_size; | |
896 | ||
897 | /* Send the data in burst via SPI*/ | |
898 | do { | |
899 | word = data[i]; | |
900 | word = (word >> 8) | (word << 8); | |
901 | ixgbe_shift_out_eeprom_bits(hw, word, 16); | |
902 | ||
903 | if (page_size == 0) | |
904 | break; | |
905 | ||
906 | /* do not wrap around page */ | |
907 | if (((offset + i) & (page_size - 1)) == | |
908 | (page_size - 1)) | |
909 | break; | |
910 | } while (++i < words); | |
911 | ||
912 | ixgbe_standby_eeprom(hw); | |
913 | usleep_range(10000, 20000); | |
914 | } | |
915 | /* Done with writing - release the EEPROM */ | |
916 | ixgbe_release_eeprom(hw); | |
917 | } | |
11afc1b1 | 918 | |
68c7005d ET |
919 | return status; |
920 | } | |
921 | ||
922 | /** | |
923 | * ixgbe_write_eeprom_generic - Writes 16 bit value to EEPROM | |
924 | * @hw: pointer to hardware structure | |
925 | * @offset: offset within the EEPROM to be written to | |
926 | * @data: 16 bit word to be written to the EEPROM | |
927 | * | |
928 | * If ixgbe_eeprom_update_checksum is not called after this function, the | |
929 | * EEPROM will most likely contain an invalid checksum. | |
930 | **/ | |
931 | s32 ixgbe_write_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 data) | |
932 | { | |
933 | s32 status; | |
11afc1b1 | 934 | |
68c7005d | 935 | hw->eeprom.ops.init_params(hw); |
11afc1b1 | 936 | |
68c7005d ET |
937 | if (offset >= hw->eeprom.word_size) { |
938 | status = IXGBE_ERR_EEPROM; | |
939 | goto out; | |
11afc1b1 PW |
940 | } |
941 | ||
68c7005d ET |
942 | status = ixgbe_write_eeprom_buffer_bit_bang(hw, offset, 1, &data); |
943 | ||
11afc1b1 PW |
944 | out: |
945 | return status; | |
946 | } | |
947 | ||
9a799d71 | 948 | /** |
68c7005d | 949 | * ixgbe_read_eeprom_buffer_bit_bang_generic - Read EEPROM using bit-bang |
c44ade9e JB |
950 | * @hw: pointer to hardware structure |
951 | * @offset: offset within the EEPROM to be read | |
68c7005d ET |
952 | * @words: number of word(s) |
953 | * @data: read 16 bit words(s) from EEPROM | |
c44ade9e | 954 | * |
68c7005d | 955 | * Reads 16 bit word(s) from EEPROM through bit-bang method |
c44ade9e | 956 | **/ |
68c7005d ET |
957 | s32 ixgbe_read_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset, |
958 | u16 words, u16 *data) | |
c44ade9e | 959 | { |
68c7005d ET |
960 | s32 status = 0; |
961 | u16 i, count; | |
c44ade9e JB |
962 | |
963 | hw->eeprom.ops.init_params(hw); | |
964 | ||
68c7005d ET |
965 | if (words == 0) { |
966 | status = IXGBE_ERR_INVALID_ARGUMENT; | |
967 | goto out; | |
968 | } | |
969 | ||
970 | if (offset + words > hw->eeprom.word_size) { | |
c44ade9e JB |
971 | status = IXGBE_ERR_EEPROM; |
972 | goto out; | |
973 | } | |
974 | ||
68c7005d ET |
975 | /* |
976 | * We cannot hold synchronization semaphores for too long | |
977 | * to avoid other entity starvation. However it is more efficient | |
978 | * to read in bursts than synchronizing access for each word. | |
979 | */ | |
980 | for (i = 0; i < words; i += IXGBE_EEPROM_RD_BUFFER_MAX_COUNT) { | |
981 | count = (words - i) / IXGBE_EEPROM_RD_BUFFER_MAX_COUNT > 0 ? | |
982 | IXGBE_EEPROM_RD_BUFFER_MAX_COUNT : (words - i); | |
983 | ||
984 | status = ixgbe_read_eeprom_buffer_bit_bang(hw, offset + i, | |
985 | count, &data[i]); | |
986 | ||
987 | if (status != 0) | |
988 | break; | |
989 | } | |
990 | ||
991 | out: | |
992 | return status; | |
993 | } | |
994 | ||
995 | /** | |
996 | * ixgbe_read_eeprom_buffer_bit_bang - Read EEPROM using bit-bang | |
997 | * @hw: pointer to hardware structure | |
998 | * @offset: offset within the EEPROM to be read | |
999 | * @words: number of word(s) | |
1000 | * @data: read 16 bit word(s) from EEPROM | |
1001 | * | |
1002 | * Reads 16 bit word(s) from EEPROM through bit-bang method | |
1003 | **/ | |
1004 | static s32 ixgbe_read_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset, | |
1005 | u16 words, u16 *data) | |
1006 | { | |
1007 | s32 status; | |
1008 | u16 word_in; | |
1009 | u8 read_opcode = IXGBE_EEPROM_READ_OPCODE_SPI; | |
1010 | u16 i; | |
1011 | ||
c44ade9e JB |
1012 | /* Prepare the EEPROM for reading */ |
1013 | status = ixgbe_acquire_eeprom(hw); | |
1014 | ||
1015 | if (status == 0) { | |
1016 | if (ixgbe_ready_eeprom(hw) != 0) { | |
1017 | ixgbe_release_eeprom(hw); | |
1018 | status = IXGBE_ERR_EEPROM; | |
1019 | } | |
1020 | } | |
1021 | ||
1022 | if (status == 0) { | |
68c7005d ET |
1023 | for (i = 0; i < words; i++) { |
1024 | ixgbe_standby_eeprom(hw); | |
1025 | /* | |
1026 | * Some SPI eeproms use the 8th address bit embedded | |
1027 | * in the opcode | |
1028 | */ | |
1029 | if ((hw->eeprom.address_bits == 8) && | |
1030 | ((offset + i) >= 128)) | |
1031 | read_opcode |= IXGBE_EEPROM_A8_OPCODE_SPI; | |
1032 | ||
1033 | /* Send the READ command (opcode + addr) */ | |
1034 | ixgbe_shift_out_eeprom_bits(hw, read_opcode, | |
1035 | IXGBE_EEPROM_OPCODE_BITS); | |
1036 | ixgbe_shift_out_eeprom_bits(hw, (u16)((offset + i) * 2), | |
1037 | hw->eeprom.address_bits); | |
1038 | ||
1039 | /* Read the data. */ | |
1040 | word_in = ixgbe_shift_in_eeprom_bits(hw, 16); | |
1041 | data[i] = (word_in >> 8) | (word_in << 8); | |
1042 | } | |
c44ade9e | 1043 | |
68c7005d ET |
1044 | /* End this read operation */ |
1045 | ixgbe_release_eeprom(hw); | |
1046 | } | |
c44ade9e | 1047 | |
68c7005d ET |
1048 | return status; |
1049 | } | |
c44ade9e | 1050 | |
68c7005d ET |
1051 | /** |
1052 | * ixgbe_read_eeprom_bit_bang_generic - Read EEPROM word using bit-bang | |
1053 | * @hw: pointer to hardware structure | |
1054 | * @offset: offset within the EEPROM to be read | |
1055 | * @data: read 16 bit value from EEPROM | |
1056 | * | |
1057 | * Reads 16 bit value from EEPROM through bit-bang method | |
1058 | **/ | |
1059 | s32 ixgbe_read_eeprom_bit_bang_generic(struct ixgbe_hw *hw, u16 offset, | |
1060 | u16 *data) | |
1061 | { | |
1062 | s32 status; | |
c44ade9e | 1063 | |
68c7005d ET |
1064 | hw->eeprom.ops.init_params(hw); |
1065 | ||
1066 | if (offset >= hw->eeprom.word_size) { | |
1067 | status = IXGBE_ERR_EEPROM; | |
1068 | goto out; | |
c44ade9e JB |
1069 | } |
1070 | ||
68c7005d ET |
1071 | status = ixgbe_read_eeprom_buffer_bit_bang(hw, offset, 1, data); |
1072 | ||
c44ade9e JB |
1073 | out: |
1074 | return status; | |
1075 | } | |
1076 | ||
1077 | /** | |
68c7005d | 1078 | * ixgbe_read_eerd_buffer_generic - Read EEPROM word(s) using EERD |
9a799d71 | 1079 | * @hw: pointer to hardware structure |
68c7005d ET |
1080 | * @offset: offset of word in the EEPROM to read |
1081 | * @words: number of word(s) | |
1082 | * @data: 16 bit word(s) from the EEPROM | |
9a799d71 | 1083 | * |
68c7005d | 1084 | * Reads a 16 bit word(s) from the EEPROM using the EERD register. |
9a799d71 | 1085 | **/ |
68c7005d ET |
1086 | s32 ixgbe_read_eerd_buffer_generic(struct ixgbe_hw *hw, u16 offset, |
1087 | u16 words, u16 *data) | |
9a799d71 AK |
1088 | { |
1089 | u32 eerd; | |
68c7005d ET |
1090 | s32 status = 0; |
1091 | u32 i; | |
9a799d71 | 1092 | |
c44ade9e JB |
1093 | hw->eeprom.ops.init_params(hw); |
1094 | ||
68c7005d ET |
1095 | if (words == 0) { |
1096 | status = IXGBE_ERR_INVALID_ARGUMENT; | |
1097 | goto out; | |
1098 | } | |
1099 | ||
c44ade9e JB |
1100 | if (offset >= hw->eeprom.word_size) { |
1101 | status = IXGBE_ERR_EEPROM; | |
1102 | goto out; | |
1103 | } | |
1104 | ||
68c7005d ET |
1105 | for (i = 0; i < words; i++) { |
1106 | eerd = ((offset + i) << IXGBE_EEPROM_RW_ADDR_SHIFT) + | |
1107 | IXGBE_EEPROM_RW_REG_START; | |
9a799d71 | 1108 | |
68c7005d ET |
1109 | IXGBE_WRITE_REG(hw, IXGBE_EERD, eerd); |
1110 | status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_READ); | |
9a799d71 | 1111 | |
68c7005d ET |
1112 | if (status == 0) { |
1113 | data[i] = (IXGBE_READ_REG(hw, IXGBE_EERD) >> | |
1114 | IXGBE_EEPROM_RW_REG_DATA); | |
1115 | } else { | |
1116 | hw_dbg(hw, "Eeprom read timed out\n"); | |
1117 | goto out; | |
1118 | } | |
1119 | } | |
1120 | out: | |
1121 | return status; | |
1122 | } | |
9a799d71 | 1123 | |
68c7005d ET |
1124 | /** |
1125 | * ixgbe_detect_eeprom_page_size_generic - Detect EEPROM page size | |
1126 | * @hw: pointer to hardware structure | |
1127 | * @offset: offset within the EEPROM to be used as a scratch pad | |
1128 | * | |
1129 | * Discover EEPROM page size by writing marching data at given offset. | |
1130 | * This function is called only when we are writing a new large buffer | |
1131 | * at given offset so the data would be overwritten anyway. | |
1132 | **/ | |
1133 | static s32 ixgbe_detect_eeprom_page_size_generic(struct ixgbe_hw *hw, | |
1134 | u16 offset) | |
1135 | { | |
1136 | u16 data[IXGBE_EEPROM_PAGE_SIZE_MAX]; | |
1137 | s32 status = 0; | |
1138 | u16 i; | |
1139 | ||
1140 | for (i = 0; i < IXGBE_EEPROM_PAGE_SIZE_MAX; i++) | |
1141 | data[i] = i; | |
1142 | ||
1143 | hw->eeprom.word_page_size = IXGBE_EEPROM_PAGE_SIZE_MAX; | |
1144 | status = ixgbe_write_eeprom_buffer_bit_bang(hw, offset, | |
1145 | IXGBE_EEPROM_PAGE_SIZE_MAX, data); | |
1146 | hw->eeprom.word_page_size = 0; | |
1147 | if (status != 0) | |
1148 | goto out; | |
1149 | ||
1150 | status = ixgbe_read_eeprom_buffer_bit_bang(hw, offset, 1, data); | |
1151 | if (status != 0) | |
1152 | goto out; | |
1153 | ||
1154 | /* | |
1155 | * When writing in burst more than the actual page size | |
1156 | * EEPROM address wraps around current page. | |
1157 | */ | |
1158 | hw->eeprom.word_page_size = IXGBE_EEPROM_PAGE_SIZE_MAX - data[0]; | |
1159 | ||
1160 | hw_dbg(hw, "Detected EEPROM page size = %d words.", | |
1161 | hw->eeprom.word_page_size); | |
c44ade9e | 1162 | out: |
9a799d71 AK |
1163 | return status; |
1164 | } | |
1165 | ||
eb9c3e3e | 1166 | /** |
68c7005d ET |
1167 | * ixgbe_read_eerd_generic - Read EEPROM word using EERD |
1168 | * @hw: pointer to hardware structure | |
1169 | * @offset: offset of word in the EEPROM to read | |
1170 | * @data: word read from the EEPROM | |
1171 | * | |
1172 | * Reads a 16 bit word from the EEPROM using the EERD register. | |
1173 | **/ | |
1174 | s32 ixgbe_read_eerd_generic(struct ixgbe_hw *hw, u16 offset, u16 *data) | |
1175 | { | |
1176 | return ixgbe_read_eerd_buffer_generic(hw, offset, 1, data); | |
1177 | } | |
1178 | ||
1179 | /** | |
1180 | * ixgbe_write_eewr_buffer_generic - Write EEPROM word(s) using EEWR | |
eb9c3e3e ET |
1181 | * @hw: pointer to hardware structure |
1182 | * @offset: offset of word in the EEPROM to write | |
68c7005d ET |
1183 | * @words: number of words |
1184 | * @data: word(s) write to the EEPROM | |
eb9c3e3e | 1185 | * |
68c7005d | 1186 | * Write a 16 bit word(s) to the EEPROM using the EEWR register. |
eb9c3e3e | 1187 | **/ |
68c7005d ET |
1188 | s32 ixgbe_write_eewr_buffer_generic(struct ixgbe_hw *hw, u16 offset, |
1189 | u16 words, u16 *data) | |
eb9c3e3e ET |
1190 | { |
1191 | u32 eewr; | |
68c7005d ET |
1192 | s32 status = 0; |
1193 | u16 i; | |
eb9c3e3e ET |
1194 | |
1195 | hw->eeprom.ops.init_params(hw); | |
1196 | ||
68c7005d ET |
1197 | if (words == 0) { |
1198 | status = IXGBE_ERR_INVALID_ARGUMENT; | |
1199 | goto out; | |
1200 | } | |
1201 | ||
eb9c3e3e ET |
1202 | if (offset >= hw->eeprom.word_size) { |
1203 | status = IXGBE_ERR_EEPROM; | |
1204 | goto out; | |
1205 | } | |
1206 | ||
68c7005d ET |
1207 | for (i = 0; i < words; i++) { |
1208 | eewr = ((offset + i) << IXGBE_EEPROM_RW_ADDR_SHIFT) | | |
1209 | (data[i] << IXGBE_EEPROM_RW_REG_DATA) | | |
1210 | IXGBE_EEPROM_RW_REG_START; | |
eb9c3e3e | 1211 | |
68c7005d ET |
1212 | status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_WRITE); |
1213 | if (status != 0) { | |
1214 | hw_dbg(hw, "Eeprom write EEWR timed out\n"); | |
1215 | goto out; | |
1216 | } | |
eb9c3e3e | 1217 | |
68c7005d | 1218 | IXGBE_WRITE_REG(hw, IXGBE_EEWR, eewr); |
eb9c3e3e | 1219 | |
68c7005d ET |
1220 | status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_WRITE); |
1221 | if (status != 0) { | |
1222 | hw_dbg(hw, "Eeprom write EEWR timed out\n"); | |
1223 | goto out; | |
1224 | } | |
eb9c3e3e ET |
1225 | } |
1226 | ||
1227 | out: | |
1228 | return status; | |
1229 | } | |
1230 | ||
68c7005d ET |
1231 | /** |
1232 | * ixgbe_write_eewr_generic - Write EEPROM word using EEWR | |
1233 | * @hw: pointer to hardware structure | |
1234 | * @offset: offset of word in the EEPROM to write | |
1235 | * @data: word write to the EEPROM | |
1236 | * | |
1237 | * Write a 16 bit word to the EEPROM using the EEWR register. | |
1238 | **/ | |
1239 | s32 ixgbe_write_eewr_generic(struct ixgbe_hw *hw, u16 offset, u16 data) | |
1240 | { | |
1241 | return ixgbe_write_eewr_buffer_generic(hw, offset, 1, &data); | |
1242 | } | |
1243 | ||
9a799d71 | 1244 | /** |
21ce849b | 1245 | * ixgbe_poll_eerd_eewr_done - Poll EERD read or EEWR write status |
9a799d71 | 1246 | * @hw: pointer to hardware structure |
21ce849b | 1247 | * @ee_reg: EEPROM flag for polling |
9a799d71 | 1248 | * |
21ce849b MC |
1249 | * Polls the status bit (bit 1) of the EERD or EEWR to determine when the |
1250 | * read or write is done respectively. | |
9a799d71 | 1251 | **/ |
eb9c3e3e | 1252 | static s32 ixgbe_poll_eerd_eewr_done(struct ixgbe_hw *hw, u32 ee_reg) |
9a799d71 AK |
1253 | { |
1254 | u32 i; | |
1255 | u32 reg; | |
1256 | s32 status = IXGBE_ERR_EEPROM; | |
1257 | ||
21ce849b MC |
1258 | for (i = 0; i < IXGBE_EERD_EEWR_ATTEMPTS; i++) { |
1259 | if (ee_reg == IXGBE_NVM_POLL_READ) | |
1260 | reg = IXGBE_READ_REG(hw, IXGBE_EERD); | |
1261 | else | |
1262 | reg = IXGBE_READ_REG(hw, IXGBE_EEWR); | |
1263 | ||
1264 | if (reg & IXGBE_EEPROM_RW_REG_DONE) { | |
9a799d71 AK |
1265 | status = 0; |
1266 | break; | |
1267 | } | |
1268 | udelay(5); | |
1269 | } | |
1270 | return status; | |
1271 | } | |
1272 | ||
c44ade9e JB |
1273 | /** |
1274 | * ixgbe_acquire_eeprom - Acquire EEPROM using bit-bang | |
1275 | * @hw: pointer to hardware structure | |
1276 | * | |
1277 | * Prepares EEPROM for access using bit-bang method. This function should | |
1278 | * be called before issuing a command to the EEPROM. | |
1279 | **/ | |
1280 | static s32 ixgbe_acquire_eeprom(struct ixgbe_hw *hw) | |
1281 | { | |
1282 | s32 status = 0; | |
dbf893ee | 1283 | u32 eec; |
c44ade9e JB |
1284 | u32 i; |
1285 | ||
5e655105 | 1286 | if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) != 0) |
c44ade9e JB |
1287 | status = IXGBE_ERR_SWFW_SYNC; |
1288 | ||
1289 | if (status == 0) { | |
1290 | eec = IXGBE_READ_REG(hw, IXGBE_EEC); | |
1291 | ||
1292 | /* Request EEPROM Access */ | |
1293 | eec |= IXGBE_EEC_REQ; | |
1294 | IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); | |
1295 | ||
1296 | for (i = 0; i < IXGBE_EEPROM_GRANT_ATTEMPTS; i++) { | |
1297 | eec = IXGBE_READ_REG(hw, IXGBE_EEC); | |
1298 | if (eec & IXGBE_EEC_GNT) | |
1299 | break; | |
1300 | udelay(5); | |
1301 | } | |
1302 | ||
1303 | /* Release if grant not acquired */ | |
1304 | if (!(eec & IXGBE_EEC_GNT)) { | |
1305 | eec &= ~IXGBE_EEC_REQ; | |
1306 | IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); | |
1307 | hw_dbg(hw, "Could not acquire EEPROM grant\n"); | |
1308 | ||
5e655105 | 1309 | hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); |
c44ade9e JB |
1310 | status = IXGBE_ERR_EEPROM; |
1311 | } | |
c44ade9e | 1312 | |
dbf893ee ET |
1313 | /* Setup EEPROM for Read/Write */ |
1314 | if (status == 0) { | |
1315 | /* Clear CS and SK */ | |
1316 | eec &= ~(IXGBE_EEC_CS | IXGBE_EEC_SK); | |
1317 | IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); | |
1318 | IXGBE_WRITE_FLUSH(hw); | |
1319 | udelay(1); | |
1320 | } | |
c44ade9e JB |
1321 | } |
1322 | return status; | |
1323 | } | |
1324 | ||
9a799d71 AK |
1325 | /** |
1326 | * ixgbe_get_eeprom_semaphore - Get hardware semaphore | |
1327 | * @hw: pointer to hardware structure | |
1328 | * | |
1329 | * Sets the hardware semaphores so EEPROM access can occur for bit-bang method | |
1330 | **/ | |
1331 | static s32 ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw) | |
1332 | { | |
1333 | s32 status = IXGBE_ERR_EEPROM; | |
dbf893ee | 1334 | u32 timeout = 2000; |
9a799d71 AK |
1335 | u32 i; |
1336 | u32 swsm; | |
1337 | ||
9a799d71 AK |
1338 | /* Get SMBI software semaphore between device drivers first */ |
1339 | for (i = 0; i < timeout; i++) { | |
1340 | /* | |
1341 | * If the SMBI bit is 0 when we read it, then the bit will be | |
1342 | * set and we have the semaphore | |
1343 | */ | |
1344 | swsm = IXGBE_READ_REG(hw, IXGBE_SWSM); | |
1345 | if (!(swsm & IXGBE_SWSM_SMBI)) { | |
1346 | status = 0; | |
1347 | break; | |
1348 | } | |
dbf893ee | 1349 | udelay(50); |
9a799d71 AK |
1350 | } |
1351 | ||
51275d37 ET |
1352 | if (i == timeout) { |
1353 | hw_dbg(hw, "Driver can't access the Eeprom - SMBI Semaphore " | |
1354 | "not granted.\n"); | |
1355 | /* | |
1356 | * this release is particularly important because our attempts | |
1357 | * above to get the semaphore may have succeeded, and if there | |
1358 | * was a timeout, we should unconditionally clear the semaphore | |
1359 | * bits to free the driver to make progress | |
1360 | */ | |
1361 | ixgbe_release_eeprom_semaphore(hw); | |
1362 | ||
1363 | udelay(50); | |
1364 | /* | |
1365 | * one last try | |
1366 | * If the SMBI bit is 0 when we read it, then the bit will be | |
1367 | * set and we have the semaphore | |
1368 | */ | |
1369 | swsm = IXGBE_READ_REG(hw, IXGBE_SWSM); | |
1370 | if (!(swsm & IXGBE_SWSM_SMBI)) | |
1371 | status = 0; | |
1372 | } | |
1373 | ||
9a799d71 AK |
1374 | /* Now get the semaphore between SW/FW through the SWESMBI bit */ |
1375 | if (status == 0) { | |
1376 | for (i = 0; i < timeout; i++) { | |
1377 | swsm = IXGBE_READ_REG(hw, IXGBE_SWSM); | |
1378 | ||
1379 | /* Set the SW EEPROM semaphore bit to request access */ | |
1380 | swsm |= IXGBE_SWSM_SWESMBI; | |
1381 | IXGBE_WRITE_REG(hw, IXGBE_SWSM, swsm); | |
1382 | ||
1383 | /* | |
1384 | * If we set the bit successfully then we got the | |
1385 | * semaphore. | |
1386 | */ | |
1387 | swsm = IXGBE_READ_REG(hw, IXGBE_SWSM); | |
1388 | if (swsm & IXGBE_SWSM_SWESMBI) | |
1389 | break; | |
1390 | ||
1391 | udelay(50); | |
1392 | } | |
1393 | ||
1394 | /* | |
1395 | * Release semaphores and return error if SW EEPROM semaphore | |
1396 | * was not granted because we don't have access to the EEPROM | |
1397 | */ | |
1398 | if (i >= timeout) { | |
dbf893ee | 1399 | hw_dbg(hw, "SWESMBI Software EEPROM semaphore " |
b4617240 | 1400 | "not granted.\n"); |
9a799d71 AK |
1401 | ixgbe_release_eeprom_semaphore(hw); |
1402 | status = IXGBE_ERR_EEPROM; | |
1403 | } | |
dbf893ee ET |
1404 | } else { |
1405 | hw_dbg(hw, "Software semaphore SMBI between device drivers " | |
1406 | "not granted.\n"); | |
9a799d71 AK |
1407 | } |
1408 | ||
1409 | return status; | |
1410 | } | |
1411 | ||
1412 | /** | |
1413 | * ixgbe_release_eeprom_semaphore - Release hardware semaphore | |
1414 | * @hw: pointer to hardware structure | |
1415 | * | |
1416 | * This function clears hardware semaphore bits. | |
1417 | **/ | |
1418 | static void ixgbe_release_eeprom_semaphore(struct ixgbe_hw *hw) | |
1419 | { | |
1420 | u32 swsm; | |
1421 | ||
1422 | swsm = IXGBE_READ_REG(hw, IXGBE_SWSM); | |
1423 | ||
1424 | /* Release both semaphores by writing 0 to the bits SWESMBI and SMBI */ | |
1425 | swsm &= ~(IXGBE_SWSM_SWESMBI | IXGBE_SWSM_SMBI); | |
1426 | IXGBE_WRITE_REG(hw, IXGBE_SWSM, swsm); | |
3957d63d | 1427 | IXGBE_WRITE_FLUSH(hw); |
9a799d71 AK |
1428 | } |
1429 | ||
c44ade9e JB |
1430 | /** |
1431 | * ixgbe_ready_eeprom - Polls for EEPROM ready | |
1432 | * @hw: pointer to hardware structure | |
1433 | **/ | |
1434 | static s32 ixgbe_ready_eeprom(struct ixgbe_hw *hw) | |
1435 | { | |
1436 | s32 status = 0; | |
1437 | u16 i; | |
1438 | u8 spi_stat_reg; | |
1439 | ||
1440 | /* | |
1441 | * Read "Status Register" repeatedly until the LSB is cleared. The | |
1442 | * EEPROM will signal that the command has been completed by clearing | |
1443 | * bit 0 of the internal status register. If it's not cleared within | |
1444 | * 5 milliseconds, then error out. | |
1445 | */ | |
1446 | for (i = 0; i < IXGBE_EEPROM_MAX_RETRY_SPI; i += 5) { | |
1447 | ixgbe_shift_out_eeprom_bits(hw, IXGBE_EEPROM_RDSR_OPCODE_SPI, | |
1448 | IXGBE_EEPROM_OPCODE_BITS); | |
1449 | spi_stat_reg = (u8)ixgbe_shift_in_eeprom_bits(hw, 8); | |
1450 | if (!(spi_stat_reg & IXGBE_EEPROM_STATUS_RDY_SPI)) | |
1451 | break; | |
1452 | ||
1453 | udelay(5); | |
1454 | ixgbe_standby_eeprom(hw); | |
6403eab1 | 1455 | } |
c44ade9e JB |
1456 | |
1457 | /* | |
1458 | * On some parts, SPI write time could vary from 0-20mSec on 3.3V | |
1459 | * devices (and only 0-5mSec on 5V devices) | |
1460 | */ | |
1461 | if (i >= IXGBE_EEPROM_MAX_RETRY_SPI) { | |
1462 | hw_dbg(hw, "SPI EEPROM Status error\n"); | |
1463 | status = IXGBE_ERR_EEPROM; | |
1464 | } | |
1465 | ||
1466 | return status; | |
1467 | } | |
1468 | ||
1469 | /** | |
1470 | * ixgbe_standby_eeprom - Returns EEPROM to a "standby" state | |
1471 | * @hw: pointer to hardware structure | |
1472 | **/ | |
1473 | static void ixgbe_standby_eeprom(struct ixgbe_hw *hw) | |
1474 | { | |
1475 | u32 eec; | |
1476 | ||
1477 | eec = IXGBE_READ_REG(hw, IXGBE_EEC); | |
1478 | ||
1479 | /* Toggle CS to flush commands */ | |
1480 | eec |= IXGBE_EEC_CS; | |
1481 | IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); | |
1482 | IXGBE_WRITE_FLUSH(hw); | |
1483 | udelay(1); | |
1484 | eec &= ~IXGBE_EEC_CS; | |
1485 | IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); | |
1486 | IXGBE_WRITE_FLUSH(hw); | |
1487 | udelay(1); | |
1488 | } | |
1489 | ||
1490 | /** | |
1491 | * ixgbe_shift_out_eeprom_bits - Shift data bits out to the EEPROM. | |
1492 | * @hw: pointer to hardware structure | |
1493 | * @data: data to send to the EEPROM | |
1494 | * @count: number of bits to shift out | |
1495 | **/ | |
1496 | static void ixgbe_shift_out_eeprom_bits(struct ixgbe_hw *hw, u16 data, | |
1497 | u16 count) | |
1498 | { | |
1499 | u32 eec; | |
1500 | u32 mask; | |
1501 | u32 i; | |
1502 | ||
1503 | eec = IXGBE_READ_REG(hw, IXGBE_EEC); | |
1504 | ||
1505 | /* | |
1506 | * Mask is used to shift "count" bits of "data" out to the EEPROM | |
1507 | * one bit at a time. Determine the starting bit based on count | |
1508 | */ | |
1509 | mask = 0x01 << (count - 1); | |
1510 | ||
1511 | for (i = 0; i < count; i++) { | |
1512 | /* | |
1513 | * A "1" is shifted out to the EEPROM by setting bit "DI" to a | |
1514 | * "1", and then raising and then lowering the clock (the SK | |
1515 | * bit controls the clock input to the EEPROM). A "0" is | |
1516 | * shifted out to the EEPROM by setting "DI" to "0" and then | |
1517 | * raising and then lowering the clock. | |
1518 | */ | |
1519 | if (data & mask) | |
1520 | eec |= IXGBE_EEC_DI; | |
1521 | else | |
1522 | eec &= ~IXGBE_EEC_DI; | |
1523 | ||
1524 | IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); | |
1525 | IXGBE_WRITE_FLUSH(hw); | |
1526 | ||
1527 | udelay(1); | |
1528 | ||
1529 | ixgbe_raise_eeprom_clk(hw, &eec); | |
1530 | ixgbe_lower_eeprom_clk(hw, &eec); | |
1531 | ||
1532 | /* | |
1533 | * Shift mask to signify next bit of data to shift in to the | |
1534 | * EEPROM | |
1535 | */ | |
1536 | mask = mask >> 1; | |
6403eab1 | 1537 | } |
c44ade9e JB |
1538 | |
1539 | /* We leave the "DI" bit set to "0" when we leave this routine. */ | |
1540 | eec &= ~IXGBE_EEC_DI; | |
1541 | IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); | |
1542 | IXGBE_WRITE_FLUSH(hw); | |
1543 | } | |
1544 | ||
1545 | /** | |
1546 | * ixgbe_shift_in_eeprom_bits - Shift data bits in from the EEPROM | |
1547 | * @hw: pointer to hardware structure | |
1548 | **/ | |
1549 | static u16 ixgbe_shift_in_eeprom_bits(struct ixgbe_hw *hw, u16 count) | |
1550 | { | |
1551 | u32 eec; | |
1552 | u32 i; | |
1553 | u16 data = 0; | |
1554 | ||
1555 | /* | |
1556 | * In order to read a register from the EEPROM, we need to shift | |
1557 | * 'count' bits in from the EEPROM. Bits are "shifted in" by raising | |
1558 | * the clock input to the EEPROM (setting the SK bit), and then reading | |
1559 | * the value of the "DO" bit. During this "shifting in" process the | |
1560 | * "DI" bit should always be clear. | |
1561 | */ | |
1562 | eec = IXGBE_READ_REG(hw, IXGBE_EEC); | |
1563 | ||
1564 | eec &= ~(IXGBE_EEC_DO | IXGBE_EEC_DI); | |
1565 | ||
1566 | for (i = 0; i < count; i++) { | |
1567 | data = data << 1; | |
1568 | ixgbe_raise_eeprom_clk(hw, &eec); | |
1569 | ||
1570 | eec = IXGBE_READ_REG(hw, IXGBE_EEC); | |
1571 | ||
1572 | eec &= ~(IXGBE_EEC_DI); | |
1573 | if (eec & IXGBE_EEC_DO) | |
1574 | data |= 1; | |
1575 | ||
1576 | ixgbe_lower_eeprom_clk(hw, &eec); | |
1577 | } | |
1578 | ||
1579 | return data; | |
1580 | } | |
1581 | ||
1582 | /** | |
1583 | * ixgbe_raise_eeprom_clk - Raises the EEPROM's clock input. | |
1584 | * @hw: pointer to hardware structure | |
1585 | * @eec: EEC register's current value | |
1586 | **/ | |
1587 | static void ixgbe_raise_eeprom_clk(struct ixgbe_hw *hw, u32 *eec) | |
1588 | { | |
1589 | /* | |
1590 | * Raise the clock input to the EEPROM | |
1591 | * (setting the SK bit), then delay | |
1592 | */ | |
1593 | *eec = *eec | IXGBE_EEC_SK; | |
1594 | IXGBE_WRITE_REG(hw, IXGBE_EEC, *eec); | |
1595 | IXGBE_WRITE_FLUSH(hw); | |
1596 | udelay(1); | |
1597 | } | |
1598 | ||
1599 | /** | |
1600 | * ixgbe_lower_eeprom_clk - Lowers the EEPROM's clock input. | |
1601 | * @hw: pointer to hardware structure | |
1602 | * @eecd: EECD's current value | |
1603 | **/ | |
1604 | static void ixgbe_lower_eeprom_clk(struct ixgbe_hw *hw, u32 *eec) | |
1605 | { | |
1606 | /* | |
1607 | * Lower the clock input to the EEPROM (clearing the SK bit), then | |
1608 | * delay | |
1609 | */ | |
1610 | *eec = *eec & ~IXGBE_EEC_SK; | |
1611 | IXGBE_WRITE_REG(hw, IXGBE_EEC, *eec); | |
1612 | IXGBE_WRITE_FLUSH(hw); | |
1613 | udelay(1); | |
1614 | } | |
1615 | ||
1616 | /** | |
1617 | * ixgbe_release_eeprom - Release EEPROM, release semaphores | |
1618 | * @hw: pointer to hardware structure | |
1619 | **/ | |
1620 | static void ixgbe_release_eeprom(struct ixgbe_hw *hw) | |
1621 | { | |
1622 | u32 eec; | |
1623 | ||
1624 | eec = IXGBE_READ_REG(hw, IXGBE_EEC); | |
1625 | ||
1626 | eec |= IXGBE_EEC_CS; /* Pull CS high */ | |
1627 | eec &= ~IXGBE_EEC_SK; /* Lower SCK */ | |
1628 | ||
1629 | IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); | |
1630 | IXGBE_WRITE_FLUSH(hw); | |
1631 | ||
1632 | udelay(1); | |
1633 | ||
1634 | /* Stop requesting EEPROM access */ | |
1635 | eec &= ~IXGBE_EEC_REQ; | |
1636 | IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); | |
1637 | ||
90827996 | 1638 | hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); |
dbf893ee | 1639 | |
032b4325 DS |
1640 | /* |
1641 | * Delay before attempt to obtain semaphore again to allow FW | |
1642 | * access. semaphore_delay is in ms we need us for usleep_range | |
1643 | */ | |
1644 | usleep_range(hw->eeprom.semaphore_delay * 1000, | |
1645 | hw->eeprom.semaphore_delay * 2000); | |
c44ade9e JB |
1646 | } |
1647 | ||
9a799d71 | 1648 | /** |
dbf893ee | 1649 | * ixgbe_calc_eeprom_checksum_generic - Calculates and returns the checksum |
9a799d71 AK |
1650 | * @hw: pointer to hardware structure |
1651 | **/ | |
a391f1d5 | 1652 | u16 ixgbe_calc_eeprom_checksum_generic(struct ixgbe_hw *hw) |
9a799d71 AK |
1653 | { |
1654 | u16 i; | |
1655 | u16 j; | |
1656 | u16 checksum = 0; | |
1657 | u16 length = 0; | |
1658 | u16 pointer = 0; | |
1659 | u16 word = 0; | |
1660 | ||
1661 | /* Include 0x0-0x3F in the checksum */ | |
1662 | for (i = 0; i < IXGBE_EEPROM_CHECKSUM; i++) { | |
c44ade9e | 1663 | if (hw->eeprom.ops.read(hw, i, &word) != 0) { |
9a799d71 AK |
1664 | hw_dbg(hw, "EEPROM read failed\n"); |
1665 | break; | |
1666 | } | |
1667 | checksum += word; | |
1668 | } | |
1669 | ||
1670 | /* Include all data from pointers except for the fw pointer */ | |
1671 | for (i = IXGBE_PCIE_ANALOG_PTR; i < IXGBE_FW_PTR; i++) { | |
c44ade9e | 1672 | hw->eeprom.ops.read(hw, i, &pointer); |
9a799d71 AK |
1673 | |
1674 | /* Make sure the pointer seems valid */ | |
1675 | if (pointer != 0xFFFF && pointer != 0) { | |
c44ade9e | 1676 | hw->eeprom.ops.read(hw, pointer, &length); |
9a799d71 AK |
1677 | |
1678 | if (length != 0xFFFF && length != 0) { | |
1679 | for (j = pointer+1; j <= pointer+length; j++) { | |
c44ade9e | 1680 | hw->eeprom.ops.read(hw, j, &word); |
9a799d71 AK |
1681 | checksum += word; |
1682 | } | |
1683 | } | |
1684 | } | |
1685 | } | |
1686 | ||
1687 | checksum = (u16)IXGBE_EEPROM_SUM - checksum; | |
1688 | ||
1689 | return checksum; | |
1690 | } | |
1691 | ||
1692 | /** | |
c44ade9e | 1693 | * ixgbe_validate_eeprom_checksum_generic - Validate EEPROM checksum |
9a799d71 AK |
1694 | * @hw: pointer to hardware structure |
1695 | * @checksum_val: calculated checksum | |
1696 | * | |
1697 | * Performs checksum calculation and validates the EEPROM checksum. If the | |
1698 | * caller does not need checksum_val, the value can be NULL. | |
1699 | **/ | |
c44ade9e JB |
1700 | s32 ixgbe_validate_eeprom_checksum_generic(struct ixgbe_hw *hw, |
1701 | u16 *checksum_val) | |
9a799d71 AK |
1702 | { |
1703 | s32 status; | |
1704 | u16 checksum; | |
1705 | u16 read_checksum = 0; | |
1706 | ||
1707 | /* | |
1708 | * Read the first word from the EEPROM. If this times out or fails, do | |
1709 | * not continue or we could be in for a very long wait while every | |
1710 | * EEPROM read fails | |
1711 | */ | |
c44ade9e | 1712 | status = hw->eeprom.ops.read(hw, 0, &checksum); |
9a799d71 AK |
1713 | |
1714 | if (status == 0) { | |
a391f1d5 | 1715 | checksum = hw->eeprom.ops.calc_checksum(hw); |
9a799d71 | 1716 | |
c44ade9e | 1717 | hw->eeprom.ops.read(hw, IXGBE_EEPROM_CHECKSUM, &read_checksum); |
9a799d71 AK |
1718 | |
1719 | /* | |
1720 | * Verify read checksum from EEPROM is the same as | |
1721 | * calculated checksum | |
1722 | */ | |
1723 | if (read_checksum != checksum) | |
1724 | status = IXGBE_ERR_EEPROM_CHECKSUM; | |
1725 | ||
1726 | /* If the user cares, return the calculated checksum */ | |
1727 | if (checksum_val) | |
1728 | *checksum_val = checksum; | |
1729 | } else { | |
1730 | hw_dbg(hw, "EEPROM read failed\n"); | |
1731 | } | |
1732 | ||
1733 | return status; | |
1734 | } | |
1735 | ||
c44ade9e JB |
1736 | /** |
1737 | * ixgbe_update_eeprom_checksum_generic - Updates the EEPROM checksum | |
1738 | * @hw: pointer to hardware structure | |
1739 | **/ | |
1740 | s32 ixgbe_update_eeprom_checksum_generic(struct ixgbe_hw *hw) | |
1741 | { | |
1742 | s32 status; | |
1743 | u16 checksum; | |
1744 | ||
1745 | /* | |
1746 | * Read the first word from the EEPROM. If this times out or fails, do | |
1747 | * not continue or we could be in for a very long wait while every | |
1748 | * EEPROM read fails | |
1749 | */ | |
1750 | status = hw->eeprom.ops.read(hw, 0, &checksum); | |
1751 | ||
1752 | if (status == 0) { | |
a391f1d5 | 1753 | checksum = hw->eeprom.ops.calc_checksum(hw); |
c44ade9e | 1754 | status = hw->eeprom.ops.write(hw, IXGBE_EEPROM_CHECKSUM, |
8c7bea32 | 1755 | checksum); |
c44ade9e JB |
1756 | } else { |
1757 | hw_dbg(hw, "EEPROM read failed\n"); | |
1758 | } | |
1759 | ||
1760 | return status; | |
1761 | } | |
1762 | ||
9a799d71 AK |
1763 | /** |
1764 | * ixgbe_validate_mac_addr - Validate MAC address | |
1765 | * @mac_addr: pointer to MAC address. | |
1766 | * | |
1767 | * Tests a MAC address to ensure it is a valid Individual Address | |
1768 | **/ | |
1769 | s32 ixgbe_validate_mac_addr(u8 *mac_addr) | |
1770 | { | |
1771 | s32 status = 0; | |
1772 | ||
1773 | /* Make sure it is not a multicast address */ | |
1774 | if (IXGBE_IS_MULTICAST(mac_addr)) | |
1775 | status = IXGBE_ERR_INVALID_MAC_ADDR; | |
1776 | /* Not a broadcast address */ | |
1777 | else if (IXGBE_IS_BROADCAST(mac_addr)) | |
1778 | status = IXGBE_ERR_INVALID_MAC_ADDR; | |
1779 | /* Reject the zero address */ | |
1780 | else if (mac_addr[0] == 0 && mac_addr[1] == 0 && mac_addr[2] == 0 && | |
c44ade9e | 1781 | mac_addr[3] == 0 && mac_addr[4] == 0 && mac_addr[5] == 0) |
9a799d71 AK |
1782 | status = IXGBE_ERR_INVALID_MAC_ADDR; |
1783 | ||
1784 | return status; | |
1785 | } | |
1786 | ||
1787 | /** | |
c44ade9e | 1788 | * ixgbe_set_rar_generic - Set Rx address register |
9a799d71 | 1789 | * @hw: pointer to hardware structure |
9a799d71 | 1790 | * @index: Receive address register to write |
c44ade9e JB |
1791 | * @addr: Address to put into receive address register |
1792 | * @vmdq: VMDq "set" or "pool" index | |
9a799d71 AK |
1793 | * @enable_addr: set flag that address is active |
1794 | * | |
1795 | * Puts an ethernet address into a receive address register. | |
1796 | **/ | |
c44ade9e JB |
1797 | s32 ixgbe_set_rar_generic(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq, |
1798 | u32 enable_addr) | |
9a799d71 AK |
1799 | { |
1800 | u32 rar_low, rar_high; | |
c44ade9e JB |
1801 | u32 rar_entries = hw->mac.num_rar_entries; |
1802 | ||
c700f4e6 ET |
1803 | /* Make sure we are using a valid rar index range */ |
1804 | if (index >= rar_entries) { | |
1805 | hw_dbg(hw, "RAR index %d is out of range.\n", index); | |
1806 | return IXGBE_ERR_INVALID_ARGUMENT; | |
1807 | } | |
1808 | ||
c44ade9e JB |
1809 | /* setup VMDq pool selection before this RAR gets enabled */ |
1810 | hw->mac.ops.set_vmdq(hw, index, vmdq); | |
9a799d71 | 1811 | |
c700f4e6 ET |
1812 | /* |
1813 | * HW expects these in little endian so we reverse the byte | |
1814 | * order from network order (big endian) to little endian | |
1815 | */ | |
1816 | rar_low = ((u32)addr[0] | | |
1817 | ((u32)addr[1] << 8) | | |
1818 | ((u32)addr[2] << 16) | | |
1819 | ((u32)addr[3] << 24)); | |
1820 | /* | |
1821 | * Some parts put the VMDq setting in the extra RAH bits, | |
1822 | * so save everything except the lower 16 bits that hold part | |
1823 | * of the address and the address valid bit. | |
1824 | */ | |
1825 | rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(index)); | |
1826 | rar_high &= ~(0x0000FFFF | IXGBE_RAH_AV); | |
1827 | rar_high |= ((u32)addr[4] | ((u32)addr[5] << 8)); | |
9a799d71 | 1828 | |
c700f4e6 ET |
1829 | if (enable_addr != 0) |
1830 | rar_high |= IXGBE_RAH_AV; | |
9a799d71 | 1831 | |
c700f4e6 ET |
1832 | IXGBE_WRITE_REG(hw, IXGBE_RAL(index), rar_low); |
1833 | IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high); | |
c44ade9e JB |
1834 | |
1835 | return 0; | |
1836 | } | |
1837 | ||
1838 | /** | |
1839 | * ixgbe_clear_rar_generic - Remove Rx address register | |
1840 | * @hw: pointer to hardware structure | |
1841 | * @index: Receive address register to write | |
1842 | * | |
1843 | * Clears an ethernet address from a receive address register. | |
1844 | **/ | |
1845 | s32 ixgbe_clear_rar_generic(struct ixgbe_hw *hw, u32 index) | |
1846 | { | |
1847 | u32 rar_high; | |
1848 | u32 rar_entries = hw->mac.num_rar_entries; | |
1849 | ||
1850 | /* Make sure we are using a valid rar index range */ | |
c700f4e6 | 1851 | if (index >= rar_entries) { |
c44ade9e | 1852 | hw_dbg(hw, "RAR index %d is out of range.\n", index); |
c700f4e6 | 1853 | return IXGBE_ERR_INVALID_ARGUMENT; |
c44ade9e JB |
1854 | } |
1855 | ||
c700f4e6 ET |
1856 | /* |
1857 | * Some parts put the VMDq setting in the extra RAH bits, | |
1858 | * so save everything except the lower 16 bits that hold part | |
1859 | * of the address and the address valid bit. | |
1860 | */ | |
1861 | rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(index)); | |
1862 | rar_high &= ~(0x0000FFFF | IXGBE_RAH_AV); | |
1863 | ||
1864 | IXGBE_WRITE_REG(hw, IXGBE_RAL(index), 0); | |
1865 | IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high); | |
1866 | ||
c44ade9e JB |
1867 | /* clear VMDq pool/queue selection for this RAR */ |
1868 | hw->mac.ops.clear_vmdq(hw, index, IXGBE_CLEAR_VMDQ_ALL); | |
9a799d71 AK |
1869 | |
1870 | return 0; | |
1871 | } | |
1872 | ||
c44ade9e JB |
1873 | /** |
1874 | * ixgbe_init_rx_addrs_generic - Initializes receive address filters. | |
9a799d71 AK |
1875 | * @hw: pointer to hardware structure |
1876 | * | |
1877 | * Places the MAC address in receive address register 0 and clears the rest | |
c44ade9e | 1878 | * of the receive address registers. Clears the multicast table. Assumes |
9a799d71 AK |
1879 | * the receiver is in reset when the routine is called. |
1880 | **/ | |
c44ade9e | 1881 | s32 ixgbe_init_rx_addrs_generic(struct ixgbe_hw *hw) |
9a799d71 AK |
1882 | { |
1883 | u32 i; | |
2c5645cf | 1884 | u32 rar_entries = hw->mac.num_rar_entries; |
9a799d71 AK |
1885 | |
1886 | /* | |
1887 | * If the current mac address is valid, assume it is a software override | |
1888 | * to the permanent address. | |
1889 | * Otherwise, use the permanent address from the eeprom. | |
1890 | */ | |
1891 | if (ixgbe_validate_mac_addr(hw->mac.addr) == | |
1892 | IXGBE_ERR_INVALID_MAC_ADDR) { | |
1893 | /* Get the MAC address from the RAR0 for later reference */ | |
c44ade9e | 1894 | hw->mac.ops.get_mac_addr(hw, hw->mac.addr); |
9a799d71 | 1895 | |
ce7194d8 | 1896 | hw_dbg(hw, " Keeping Current RAR0 Addr =%pM\n", hw->mac.addr); |
9a799d71 AK |
1897 | } else { |
1898 | /* Setup the receive address. */ | |
1899 | hw_dbg(hw, "Overriding MAC Address in RAR[0]\n"); | |
ce7194d8 | 1900 | hw_dbg(hw, " New MAC Addr =%pM\n", hw->mac.addr); |
9a799d71 | 1901 | |
c44ade9e | 1902 | hw->mac.ops.set_rar(hw, 0, hw->mac.addr, 0, IXGBE_RAH_AV); |
96cc6372 AD |
1903 | |
1904 | /* clear VMDq pool/queue selection for RAR 0 */ | |
1905 | hw->mac.ops.clear_vmdq(hw, 0, IXGBE_CLEAR_VMDQ_ALL); | |
9a799d71 | 1906 | } |
c44ade9e | 1907 | hw->addr_ctrl.overflow_promisc = 0; |
9a799d71 AK |
1908 | |
1909 | hw->addr_ctrl.rar_used_count = 1; | |
1910 | ||
1911 | /* Zero out the other receive addresses. */ | |
c44ade9e | 1912 | hw_dbg(hw, "Clearing RAR[1-%d]\n", rar_entries - 1); |
9a799d71 AK |
1913 | for (i = 1; i < rar_entries; i++) { |
1914 | IXGBE_WRITE_REG(hw, IXGBE_RAL(i), 0); | |
1915 | IXGBE_WRITE_REG(hw, IXGBE_RAH(i), 0); | |
1916 | } | |
1917 | ||
1918 | /* Clear the MTA */ | |
9a799d71 AK |
1919 | hw->addr_ctrl.mta_in_use = 0; |
1920 | IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, hw->mac.mc_filter_type); | |
1921 | ||
1922 | hw_dbg(hw, " Clearing MTA\n"); | |
2c5645cf | 1923 | for (i = 0; i < hw->mac.mcft_size; i++) |
9a799d71 AK |
1924 | IXGBE_WRITE_REG(hw, IXGBE_MTA(i), 0); |
1925 | ||
c44ade9e JB |
1926 | if (hw->mac.ops.init_uta_tables) |
1927 | hw->mac.ops.init_uta_tables(hw); | |
1928 | ||
9a799d71 AK |
1929 | return 0; |
1930 | } | |
1931 | ||
1932 | /** | |
1933 | * ixgbe_mta_vector - Determines bit-vector in multicast table to set | |
1934 | * @hw: pointer to hardware structure | |
1935 | * @mc_addr: the multicast address | |
1936 | * | |
1937 | * Extracts the 12 bits, from a multicast address, to determine which | |
1938 | * bit-vector to set in the multicast table. The hardware uses 12 bits, from | |
1939 | * incoming rx multicast addresses, to determine the bit-vector to check in | |
1940 | * the MTA. Which of the 4 combination, of 12-bits, the hardware uses is set | |
c44ade9e | 1941 | * by the MO field of the MCSTCTRL. The MO field is set during initialization |
9a799d71 AK |
1942 | * to mc_filter_type. |
1943 | **/ | |
1944 | static s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr) | |
1945 | { | |
1946 | u32 vector = 0; | |
1947 | ||
1948 | switch (hw->mac.mc_filter_type) { | |
b4617240 | 1949 | case 0: /* use bits [47:36] of the address */ |
9a799d71 AK |
1950 | vector = ((mc_addr[4] >> 4) | (((u16)mc_addr[5]) << 4)); |
1951 | break; | |
b4617240 | 1952 | case 1: /* use bits [46:35] of the address */ |
9a799d71 AK |
1953 | vector = ((mc_addr[4] >> 3) | (((u16)mc_addr[5]) << 5)); |
1954 | break; | |
b4617240 | 1955 | case 2: /* use bits [45:34] of the address */ |
9a799d71 AK |
1956 | vector = ((mc_addr[4] >> 2) | (((u16)mc_addr[5]) << 6)); |
1957 | break; | |
b4617240 | 1958 | case 3: /* use bits [43:32] of the address */ |
9a799d71 AK |
1959 | vector = ((mc_addr[4]) | (((u16)mc_addr[5]) << 8)); |
1960 | break; | |
b4617240 | 1961 | default: /* Invalid mc_filter_type */ |
9a799d71 AK |
1962 | hw_dbg(hw, "MC filter type param set incorrectly\n"); |
1963 | break; | |
1964 | } | |
1965 | ||
1966 | /* vector can only be 12-bits or boundary will be exceeded */ | |
1967 | vector &= 0xFFF; | |
1968 | return vector; | |
1969 | } | |
1970 | ||
1971 | /** | |
1972 | * ixgbe_set_mta - Set bit-vector in multicast table | |
1973 | * @hw: pointer to hardware structure | |
1974 | * @hash_value: Multicast address hash value | |
1975 | * | |
1976 | * Sets the bit-vector in the multicast table. | |
1977 | **/ | |
1978 | static void ixgbe_set_mta(struct ixgbe_hw *hw, u8 *mc_addr) | |
1979 | { | |
1980 | u32 vector; | |
1981 | u32 vector_bit; | |
1982 | u32 vector_reg; | |
9a799d71 AK |
1983 | |
1984 | hw->addr_ctrl.mta_in_use++; | |
1985 | ||
1986 | vector = ixgbe_mta_vector(hw, mc_addr); | |
1987 | hw_dbg(hw, " bit-vector = 0x%03X\n", vector); | |
1988 | ||
1989 | /* | |
1990 | * The MTA is a register array of 128 32-bit registers. It is treated | |
1991 | * like an array of 4096 bits. We want to set bit | |
1992 | * BitArray[vector_value]. So we figure out what register the bit is | |
1993 | * in, read it, OR in the new bit, then write back the new value. The | |
1994 | * register is determined by the upper 7 bits of the vector value and | |
1995 | * the bit within that register are determined by the lower 5 bits of | |
1996 | * the value. | |
1997 | */ | |
1998 | vector_reg = (vector >> 5) & 0x7F; | |
1999 | vector_bit = vector & 0x1F; | |
80960ab0 | 2000 | hw->mac.mta_shadow[vector_reg] |= (1 << vector_bit); |
9a799d71 AK |
2001 | } |
2002 | ||
9a799d71 | 2003 | /** |
c44ade9e | 2004 | * ixgbe_update_mc_addr_list_generic - Updates MAC list of multicast addresses |
9a799d71 | 2005 | * @hw: pointer to hardware structure |
2853eb89 | 2006 | * @netdev: pointer to net device structure |
9a799d71 AK |
2007 | * |
2008 | * The given list replaces any existing list. Clears the MC addrs from receive | |
c44ade9e | 2009 | * address registers and the multicast table. Uses unused receive address |
9a799d71 AK |
2010 | * registers for the first multicast addresses, and hashes the rest into the |
2011 | * multicast table. | |
2012 | **/ | |
2853eb89 JP |
2013 | s32 ixgbe_update_mc_addr_list_generic(struct ixgbe_hw *hw, |
2014 | struct net_device *netdev) | |
9a799d71 | 2015 | { |
22bedad3 | 2016 | struct netdev_hw_addr *ha; |
9a799d71 | 2017 | u32 i; |
9a799d71 AK |
2018 | |
2019 | /* | |
2020 | * Set the new number of MC addresses that we are being requested to | |
2021 | * use. | |
2022 | */ | |
2853eb89 | 2023 | hw->addr_ctrl.num_mc_addrs = netdev_mc_count(netdev); |
9a799d71 AK |
2024 | hw->addr_ctrl.mta_in_use = 0; |
2025 | ||
80960ab0 | 2026 | /* Clear mta_shadow */ |
9a799d71 | 2027 | hw_dbg(hw, " Clearing MTA\n"); |
80960ab0 | 2028 | memset(&hw->mac.mta_shadow, 0, sizeof(hw->mac.mta_shadow)); |
9a799d71 | 2029 | |
80960ab0 | 2030 | /* Update mta shadow */ |
22bedad3 | 2031 | netdev_for_each_mc_addr(ha, netdev) { |
9a799d71 | 2032 | hw_dbg(hw, " Adding the multicast addresses:\n"); |
22bedad3 | 2033 | ixgbe_set_mta(hw, ha->addr); |
9a799d71 AK |
2034 | } |
2035 | ||
2036 | /* Enable mta */ | |
80960ab0 ET |
2037 | for (i = 0; i < hw->mac.mcft_size; i++) |
2038 | IXGBE_WRITE_REG_ARRAY(hw, IXGBE_MTA(0), i, | |
2039 | hw->mac.mta_shadow[i]); | |
2040 | ||
9a799d71 AK |
2041 | if (hw->addr_ctrl.mta_in_use > 0) |
2042 | IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, | |
b4617240 | 2043 | IXGBE_MCSTCTRL_MFE | hw->mac.mc_filter_type); |
9a799d71 | 2044 | |
c44ade9e | 2045 | hw_dbg(hw, "ixgbe_update_mc_addr_list_generic Complete\n"); |
9a799d71 AK |
2046 | return 0; |
2047 | } | |
2048 | ||
2049 | /** | |
c44ade9e | 2050 | * ixgbe_enable_mc_generic - Enable multicast address in RAR |
9a799d71 AK |
2051 | * @hw: pointer to hardware structure |
2052 | * | |
c44ade9e | 2053 | * Enables multicast address in RAR and the use of the multicast hash table. |
9a799d71 | 2054 | **/ |
c44ade9e | 2055 | s32 ixgbe_enable_mc_generic(struct ixgbe_hw *hw) |
9a799d71 | 2056 | { |
c44ade9e | 2057 | struct ixgbe_addr_filter_info *a = &hw->addr_ctrl; |
9a799d71 | 2058 | |
c44ade9e JB |
2059 | if (a->mta_in_use > 0) |
2060 | IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, IXGBE_MCSTCTRL_MFE | | |
2061 | hw->mac.mc_filter_type); | |
9a799d71 AK |
2062 | |
2063 | return 0; | |
2064 | } | |
2065 | ||
2066 | /** | |
c44ade9e | 2067 | * ixgbe_disable_mc_generic - Disable multicast address in RAR |
9a799d71 | 2068 | * @hw: pointer to hardware structure |
9a799d71 | 2069 | * |
c44ade9e | 2070 | * Disables multicast address in RAR and the use of the multicast hash table. |
9a799d71 | 2071 | **/ |
c44ade9e | 2072 | s32 ixgbe_disable_mc_generic(struct ixgbe_hw *hw) |
9a799d71 | 2073 | { |
c44ade9e | 2074 | struct ixgbe_addr_filter_info *a = &hw->addr_ctrl; |
2b9ade93 | 2075 | |
c44ade9e JB |
2076 | if (a->mta_in_use > 0) |
2077 | IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, hw->mac.mc_filter_type); | |
9a799d71 AK |
2078 | |
2079 | return 0; | |
2080 | } | |
2081 | ||
11afc1b1 | 2082 | /** |
620fa036 | 2083 | * ixgbe_fc_enable_generic - Enable flow control |
11afc1b1 | 2084 | * @hw: pointer to hardware structure |
11afc1b1 PW |
2085 | * |
2086 | * Enable flow control according to the current settings. | |
2087 | **/ | |
041441d0 | 2088 | s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw) |
11afc1b1 PW |
2089 | { |
2090 | s32 ret_val = 0; | |
620fa036 | 2091 | u32 mflcn_reg, fccfg_reg; |
11afc1b1 | 2092 | u32 reg; |
16b61beb | 2093 | u32 fcrtl, fcrth; |
041441d0 | 2094 | int i; |
70b77628 | 2095 | |
041441d0 AD |
2096 | /* |
2097 | * Validate the water mark configuration for packet buffer 0. Zero | |
2098 | * water marks indicate that the packet buffer was not configured | |
2099 | * and the watermarks for packet buffer 0 should always be configured. | |
2100 | */ | |
2101 | if (!hw->fc.low_water || | |
2102 | !hw->fc.high_water[0] || | |
2103 | !hw->fc.pause_time) { | |
2104 | hw_dbg(hw, "Invalid water mark configuration\n"); | |
2105 | ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS; | |
70b77628 | 2106 | goto out; |
041441d0 | 2107 | } |
70b77628 | 2108 | |
620fa036 | 2109 | /* Negotiate the fc mode to use */ |
786e9a5f | 2110 | ixgbe_fc_autoneg(hw); |
11afc1b1 | 2111 | |
620fa036 | 2112 | /* Disable any previous flow control settings */ |
11afc1b1 | 2113 | mflcn_reg = IXGBE_READ_REG(hw, IXGBE_MFLCN); |
041441d0 | 2114 | mflcn_reg &= ~(IXGBE_MFLCN_RPFCE_MASK | IXGBE_MFLCN_RFCE); |
11afc1b1 PW |
2115 | |
2116 | fccfg_reg = IXGBE_READ_REG(hw, IXGBE_FCCFG); | |
2117 | fccfg_reg &= ~(IXGBE_FCCFG_TFCE_802_3X | IXGBE_FCCFG_TFCE_PRIORITY); | |
2118 | ||
2119 | /* | |
2120 | * The possible values of fc.current_mode are: | |
2121 | * 0: Flow control is completely disabled | |
2122 | * 1: Rx flow control is enabled (we can receive pause frames, | |
2123 | * but not send pause frames). | |
bb3daa4a PW |
2124 | * 2: Tx flow control is enabled (we can send pause frames but |
2125 | * we do not support receiving pause frames). | |
11afc1b1 PW |
2126 | * 3: Both Rx and Tx flow control (symmetric) are enabled. |
2127 | * other: Invalid. | |
2128 | */ | |
2129 | switch (hw->fc.current_mode) { | |
2130 | case ixgbe_fc_none: | |
620fa036 MC |
2131 | /* |
2132 | * Flow control is disabled by software override or autoneg. | |
2133 | * The code below will actually disable it in the HW. | |
2134 | */ | |
11afc1b1 PW |
2135 | break; |
2136 | case ixgbe_fc_rx_pause: | |
2137 | /* | |
2138 | * Rx Flow control is enabled and Tx Flow control is | |
2139 | * disabled by software override. Since there really | |
2140 | * isn't a way to advertise that we are capable of RX | |
2141 | * Pause ONLY, we will advertise that we support both | |
2142 | * symmetric and asymmetric Rx PAUSE. Later, we will | |
2143 | * disable the adapter's ability to send PAUSE frames. | |
2144 | */ | |
2145 | mflcn_reg |= IXGBE_MFLCN_RFCE; | |
2146 | break; | |
2147 | case ixgbe_fc_tx_pause: | |
2148 | /* | |
2149 | * Tx Flow control is enabled, and Rx Flow control is | |
2150 | * disabled by software override. | |
2151 | */ | |
2152 | fccfg_reg |= IXGBE_FCCFG_TFCE_802_3X; | |
2153 | break; | |
2154 | case ixgbe_fc_full: | |
2155 | /* Flow control (both Rx and Tx) is enabled by SW override. */ | |
2156 | mflcn_reg |= IXGBE_MFLCN_RFCE; | |
2157 | fccfg_reg |= IXGBE_FCCFG_TFCE_802_3X; | |
2158 | break; | |
2159 | default: | |
2160 | hw_dbg(hw, "Flow control param set incorrectly\n"); | |
539e5f02 | 2161 | ret_val = IXGBE_ERR_CONFIG; |
11afc1b1 PW |
2162 | goto out; |
2163 | break; | |
2164 | } | |
2165 | ||
620fa036 | 2166 | /* Set 802.3x based flow control settings. */ |
2132d381 | 2167 | mflcn_reg |= IXGBE_MFLCN_DPF; |
11afc1b1 PW |
2168 | IXGBE_WRITE_REG(hw, IXGBE_MFLCN, mflcn_reg); |
2169 | IXGBE_WRITE_REG(hw, IXGBE_FCCFG, fccfg_reg); | |
2170 | ||
041441d0 | 2171 | fcrtl = (hw->fc.low_water << 10) | IXGBE_FCRTL_XONE; |
264857b8 | 2172 | |
041441d0 AD |
2173 | /* Set up and enable Rx high/low water mark thresholds, enable XON. */ |
2174 | for (i = 0; i < MAX_TRAFFIC_CLASS; i++) { | |
2175 | if ((hw->fc.current_mode & ixgbe_fc_tx_pause) && | |
2176 | hw->fc.high_water[i]) { | |
2177 | IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(i), fcrtl); | |
2178 | fcrth = (hw->fc.high_water[i] << 10) | IXGBE_FCRTH_FCEN; | |
2179 | } else { | |
2180 | IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(i), 0); | |
2181 | /* | |
2182 | * In order to prevent Tx hangs when the internal Tx | |
2183 | * switch is enabled we must set the high water mark | |
2184 | * to the maximum FCRTH value. This allows the Tx | |
2185 | * switch to function even under heavy Rx workloads. | |
2186 | */ | |
2187 | fcrth = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(i)) - 32; | |
2188 | } | |
11afc1b1 | 2189 | |
041441d0 AD |
2190 | IXGBE_WRITE_REG(hw, IXGBE_FCRTH_82599(i), fcrth); |
2191 | } | |
16b61beb | 2192 | |
11afc1b1 | 2193 | /* Configure pause time (2 TCs per register) */ |
041441d0 AD |
2194 | reg = hw->fc.pause_time * 0x00010001; |
2195 | for (i = 0; i < (MAX_TRAFFIC_CLASS / 2); i++) | |
2196 | IXGBE_WRITE_REG(hw, IXGBE_FCTTV(i), reg); | |
2197 | ||
2198 | IXGBE_WRITE_REG(hw, IXGBE_FCRTV, hw->fc.pause_time / 2); | |
11afc1b1 PW |
2199 | |
2200 | out: | |
2201 | return ret_val; | |
2202 | } | |
2203 | ||
0ecc061d | 2204 | /** |
67a79df2 | 2205 | * ixgbe_negotiate_fc - Negotiate flow control |
0ecc061d | 2206 | * @hw: pointer to hardware structure |
67a79df2 AD |
2207 | * @adv_reg: flow control advertised settings |
2208 | * @lp_reg: link partner's flow control settings | |
2209 | * @adv_sym: symmetric pause bit in advertisement | |
2210 | * @adv_asm: asymmetric pause bit in advertisement | |
2211 | * @lp_sym: symmetric pause bit in link partner advertisement | |
2212 | * @lp_asm: asymmetric pause bit in link partner advertisement | |
0ecc061d | 2213 | * |
67a79df2 AD |
2214 | * Find the intersection between advertised settings and link partner's |
2215 | * advertised settings | |
0ecc061d | 2216 | **/ |
67a79df2 AD |
2217 | static s32 ixgbe_negotiate_fc(struct ixgbe_hw *hw, u32 adv_reg, u32 lp_reg, |
2218 | u32 adv_sym, u32 adv_asm, u32 lp_sym, u32 lp_asm) | |
0ecc061d | 2219 | { |
67a79df2 AD |
2220 | if ((!(adv_reg)) || (!(lp_reg))) |
2221 | return IXGBE_ERR_FC_NOT_NEGOTIATED; | |
0b0c2b31 | 2222 | |
67a79df2 AD |
2223 | if ((adv_reg & adv_sym) && (lp_reg & lp_sym)) { |
2224 | /* | |
2225 | * Now we need to check if the user selected Rx ONLY | |
2226 | * of pause frames. In this case, we had to advertise | |
2227 | * FULL flow control because we could not advertise RX | |
2228 | * ONLY. Hence, we must now check to see if we need to | |
2229 | * turn OFF the TRANSMISSION of PAUSE frames. | |
2230 | */ | |
2231 | if (hw->fc.requested_mode == ixgbe_fc_full) { | |
2232 | hw->fc.current_mode = ixgbe_fc_full; | |
2233 | hw_dbg(hw, "Flow Control = FULL.\n"); | |
2234 | } else { | |
2235 | hw->fc.current_mode = ixgbe_fc_rx_pause; | |
2236 | hw_dbg(hw, "Flow Control=RX PAUSE frames only\n"); | |
2237 | } | |
2238 | } else if (!(adv_reg & adv_sym) && (adv_reg & adv_asm) && | |
2239 | (lp_reg & lp_sym) && (lp_reg & lp_asm)) { | |
2240 | hw->fc.current_mode = ixgbe_fc_tx_pause; | |
2241 | hw_dbg(hw, "Flow Control = TX PAUSE frames only.\n"); | |
2242 | } else if ((adv_reg & adv_sym) && (adv_reg & adv_asm) && | |
2243 | !(lp_reg & lp_sym) && (lp_reg & lp_asm)) { | |
2244 | hw->fc.current_mode = ixgbe_fc_rx_pause; | |
2245 | hw_dbg(hw, "Flow Control = RX PAUSE frames only.\n"); | |
0b0c2b31 | 2246 | } else { |
67a79df2 AD |
2247 | hw->fc.current_mode = ixgbe_fc_none; |
2248 | hw_dbg(hw, "Flow Control = NONE.\n"); | |
539e5f02 | 2249 | } |
67a79df2 | 2250 | return 0; |
0b0c2b31 ET |
2251 | } |
2252 | ||
2253 | /** | |
2254 | * ixgbe_fc_autoneg_fiber - Enable flow control on 1 gig fiber | |
2255 | * @hw: pointer to hardware structure | |
2256 | * | |
2257 | * Enable flow control according on 1 gig fiber. | |
2258 | **/ | |
2259 | static s32 ixgbe_fc_autoneg_fiber(struct ixgbe_hw *hw) | |
2260 | { | |
2261 | u32 pcs_anadv_reg, pcs_lpab_reg, linkstat; | |
786e9a5f | 2262 | s32 ret_val = IXGBE_ERR_FC_NOT_NEGOTIATED; |
539e5f02 PWJ |
2263 | |
2264 | /* | |
2265 | * On multispeed fiber at 1g, bail out if | |
2266 | * - link is up but AN did not complete, or if | |
2267 | * - link is up and AN completed but timed out | |
2268 | */ | |
0b0c2b31 ET |
2269 | |
2270 | linkstat = IXGBE_READ_REG(hw, IXGBE_PCS1GLSTA); | |
53f096de | 2271 | if ((!!(linkstat & IXGBE_PCS1GLSTA_AN_COMPLETE) == 0) || |
786e9a5f | 2272 | (!!(linkstat & IXGBE_PCS1GLSTA_AN_TIMED_OUT) == 1)) |
0b0c2b31 | 2273 | goto out; |
539e5f02 | 2274 | |
0b0c2b31 ET |
2275 | pcs_anadv_reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANA); |
2276 | pcs_lpab_reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANLP); | |
2277 | ||
2278 | ret_val = ixgbe_negotiate_fc(hw, pcs_anadv_reg, | |
2279 | pcs_lpab_reg, IXGBE_PCS1GANA_SYM_PAUSE, | |
2280 | IXGBE_PCS1GANA_ASM_PAUSE, | |
2281 | IXGBE_PCS1GANA_SYM_PAUSE, | |
2282 | IXGBE_PCS1GANA_ASM_PAUSE); | |
2283 | ||
2284 | out: | |
2285 | return ret_val; | |
2286 | } | |
2287 | ||
2288 | /** | |
2289 | * ixgbe_fc_autoneg_backplane - Enable flow control IEEE clause 37 | |
2290 | * @hw: pointer to hardware structure | |
2291 | * | |
2292 | * Enable flow control according to IEEE clause 37. | |
2293 | **/ | |
2294 | static s32 ixgbe_fc_autoneg_backplane(struct ixgbe_hw *hw) | |
2295 | { | |
2296 | u32 links2, anlp1_reg, autoc_reg, links; | |
786e9a5f | 2297 | s32 ret_val = IXGBE_ERR_FC_NOT_NEGOTIATED; |
0b0c2b31 | 2298 | |
9bbe3a57 | 2299 | /* |
0b0c2b31 ET |
2300 | * On backplane, bail out if |
2301 | * - backplane autoneg was not completed, or if | |
2302 | * - we are 82599 and link partner is not AN enabled | |
9bbe3a57 | 2303 | */ |
0b0c2b31 | 2304 | links = IXGBE_READ_REG(hw, IXGBE_LINKS); |
786e9a5f | 2305 | if ((links & IXGBE_LINKS_KX_AN_COMP) == 0) |
9bbe3a57 | 2306 | goto out; |
9bbe3a57 | 2307 | |
0b0c2b31 ET |
2308 | if (hw->mac.type == ixgbe_mac_82599EB) { |
2309 | links2 = IXGBE_READ_REG(hw, IXGBE_LINKS2); | |
786e9a5f | 2310 | if ((links2 & IXGBE_LINKS2_AN_SUPPORTED) == 0) |
0b0c2b31 | 2311 | goto out; |
0b0c2b31 | 2312 | } |
0ecc061d | 2313 | /* |
0b0c2b31 | 2314 | * Read the 10g AN autoc and LP ability registers and resolve |
0ecc061d PWJ |
2315 | * local flow control settings accordingly |
2316 | */ | |
0b0c2b31 ET |
2317 | autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); |
2318 | anlp1_reg = IXGBE_READ_REG(hw, IXGBE_ANLP1); | |
539e5f02 | 2319 | |
0b0c2b31 ET |
2320 | ret_val = ixgbe_negotiate_fc(hw, autoc_reg, |
2321 | anlp1_reg, IXGBE_AUTOC_SYM_PAUSE, IXGBE_AUTOC_ASM_PAUSE, | |
2322 | IXGBE_ANLP1_SYM_PAUSE, IXGBE_ANLP1_ASM_PAUSE); | |
2323 | ||
2324 | out: | |
2325 | return ret_val; | |
2326 | } | |
2327 | ||
2328 | /** | |
2329 | * ixgbe_fc_autoneg_copper - Enable flow control IEEE clause 37 | |
2330 | * @hw: pointer to hardware structure | |
2331 | * | |
2332 | * Enable flow control according to IEEE clause 37. | |
2333 | **/ | |
2334 | static s32 ixgbe_fc_autoneg_copper(struct ixgbe_hw *hw) | |
2335 | { | |
2336 | u16 technology_ability_reg = 0; | |
2337 | u16 lp_technology_ability_reg = 0; | |
2338 | ||
2339 | hw->phy.ops.read_reg(hw, MDIO_AN_ADVERTISE, | |
2340 | MDIO_MMD_AN, | |
2341 | &technology_ability_reg); | |
2342 | hw->phy.ops.read_reg(hw, MDIO_AN_LPA, | |
2343 | MDIO_MMD_AN, | |
2344 | &lp_technology_ability_reg); | |
2345 | ||
2346 | return ixgbe_negotiate_fc(hw, (u32)technology_ability_reg, | |
2347 | (u32)lp_technology_ability_reg, | |
2348 | IXGBE_TAF_SYM_PAUSE, IXGBE_TAF_ASM_PAUSE, | |
2349 | IXGBE_TAF_SYM_PAUSE, IXGBE_TAF_ASM_PAUSE); | |
2350 | } | |
2351 | ||
2352 | /** | |
67a79df2 | 2353 | * ixgbe_fc_autoneg - Configure flow control |
11afc1b1 PW |
2354 | * @hw: pointer to hardware structure |
2355 | * | |
67a79df2 AD |
2356 | * Compares our advertised flow control capabilities to those advertised by |
2357 | * our link partner, and determines the proper flow control mode to use. | |
11afc1b1 | 2358 | **/ |
67a79df2 | 2359 | void ixgbe_fc_autoneg(struct ixgbe_hw *hw) |
11afc1b1 | 2360 | { |
67a79df2 AD |
2361 | s32 ret_val = IXGBE_ERR_FC_NOT_NEGOTIATED; |
2362 | ixgbe_link_speed speed; | |
2363 | bool link_up; | |
11afc1b1 PW |
2364 | |
2365 | /* | |
67a79df2 AD |
2366 | * AN should have completed when the cable was plugged in. |
2367 | * Look for reasons to bail out. Bail out if: | |
2368 | * - FC autoneg is disabled, or if | |
2369 | * - link is not up. | |
2370 | * | |
2371 | * Since we're being called from an LSC, link is already known to be up. | |
2372 | * So use link_up_wait_to_complete=false. | |
11afc1b1 | 2373 | */ |
67a79df2 | 2374 | if (hw->fc.disable_fc_autoneg) |
620fa036 | 2375 | goto out; |
11afc1b1 | 2376 | |
67a79df2 AD |
2377 | hw->mac.ops.check_link(hw, &speed, &link_up, false); |
2378 | if (!link_up) | |
11afc1b1 | 2379 | goto out; |
0b0c2b31 ET |
2380 | |
2381 | switch (hw->phy.media_type) { | |
67a79df2 | 2382 | /* Autoneg flow control on fiber adapters */ |
0b0c2b31 | 2383 | case ixgbe_media_type_fiber: |
67a79df2 AD |
2384 | if (speed == IXGBE_LINK_SPEED_1GB_FULL) |
2385 | ret_val = ixgbe_fc_autoneg_fiber(hw); | |
2386 | break; | |
2387 | ||
2388 | /* Autoneg flow control on backplane adapters */ | |
0b0c2b31 | 2389 | case ixgbe_media_type_backplane: |
67a79df2 | 2390 | ret_val = ixgbe_fc_autoneg_backplane(hw); |
0b0c2b31 ET |
2391 | break; |
2392 | ||
67a79df2 | 2393 | /* Autoneg flow control on copper adapters */ |
0b0c2b31 | 2394 | case ixgbe_media_type_copper: |
67a79df2 AD |
2395 | if (ixgbe_device_supports_autoneg_fc(hw) == 0) |
2396 | ret_val = ixgbe_fc_autoneg_copper(hw); | |
0b0c2b31 ET |
2397 | break; |
2398 | ||
2399 | default: | |
620fa036 | 2400 | break; |
0b0c2b31 | 2401 | } |
539e5f02 | 2402 | |
11afc1b1 | 2403 | out: |
67a79df2 AD |
2404 | if (ret_val == 0) { |
2405 | hw->fc.fc_was_autonegged = true; | |
2406 | } else { | |
2407 | hw->fc.fc_was_autonegged = false; | |
2408 | hw->fc.current_mode = hw->fc.requested_mode; | |
2409 | } | |
11afc1b1 PW |
2410 | } |
2411 | ||
9a799d71 AK |
2412 | /** |
2413 | * ixgbe_disable_pcie_master - Disable PCI-express master access | |
2414 | * @hw: pointer to hardware structure | |
2415 | * | |
2416 | * Disables PCI-Express master access and verifies there are no pending | |
2417 | * requests. IXGBE_ERR_MASTER_REQUESTS_PENDING is returned if master disable | |
2418 | * bit hasn't caused the master requests to be disabled, else 0 | |
2419 | * is returned signifying master requests disabled. | |
2420 | **/ | |
ff9d1a5a | 2421 | static s32 ixgbe_disable_pcie_master(struct ixgbe_hw *hw) |
9a799d71 | 2422 | { |
a4297dc2 | 2423 | struct ixgbe_adapter *adapter = hw->back; |
a4297dc2 | 2424 | s32 status = 0; |
ff9d1a5a ET |
2425 | u32 i; |
2426 | u16 value; | |
2427 | ||
2428 | /* Always set this bit to ensure any future transactions are blocked */ | |
2429 | IXGBE_WRITE_REG(hw, IXGBE_CTRL, IXGBE_CTRL_GIO_DIS); | |
a4297dc2 | 2430 | |
ff9d1a5a | 2431 | /* Exit if master requests are blocked */ |
a4297dc2 ET |
2432 | if (!(IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_GIO)) |
2433 | goto out; | |
9a799d71 | 2434 | |
ff9d1a5a | 2435 | /* Poll for master request bit to clear */ |
9a799d71 | 2436 | for (i = 0; i < IXGBE_PCI_MASTER_DISABLE_TIMEOUT; i++) { |
a4297dc2 | 2437 | udelay(100); |
ff9d1a5a ET |
2438 | if (!(IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_GIO)) |
2439 | goto out; | |
a4297dc2 ET |
2440 | } |
2441 | ||
ff9d1a5a ET |
2442 | /* |
2443 | * Two consecutive resets are required via CTRL.RST per datasheet | |
2444 | * 5.2.5.3.2 Master Disable. We set a flag to inform the reset routine | |
2445 | * of this need. The first reset prevents new master requests from | |
2446 | * being issued by our device. We then must wait 1usec or more for any | |
2447 | * remaining completions from the PCIe bus to trickle in, and then reset | |
2448 | * again to clear out any effects they may have had on our device. | |
2449 | */ | |
a4297dc2 | 2450 | hw_dbg(hw, "GIO Master Disable bit didn't clear - requesting resets\n"); |
ff9d1a5a | 2451 | hw->mac.flags |= IXGBE_FLAGS_DOUBLE_RESET_REQUIRED; |
a4297dc2 ET |
2452 | |
2453 | /* | |
2454 | * Before proceeding, make sure that the PCIe block does not have | |
2455 | * transactions pending. | |
2456 | */ | |
a4297dc2 | 2457 | for (i = 0; i < IXGBE_PCI_MASTER_DISABLE_TIMEOUT; i++) { |
9a799d71 | 2458 | udelay(100); |
ff9d1a5a ET |
2459 | pci_read_config_word(adapter->pdev, IXGBE_PCI_DEVICE_STATUS, |
2460 | &value); | |
2461 | if (!(value & IXGBE_PCI_DEVICE_STATUS_TRANSACTION_PENDING)) | |
2462 | goto out; | |
9a799d71 AK |
2463 | } |
2464 | ||
ff9d1a5a ET |
2465 | hw_dbg(hw, "PCIe transaction pending bit also did not clear.\n"); |
2466 | status = IXGBE_ERR_MASTER_REQUESTS_PENDING; | |
a4297dc2 ET |
2467 | |
2468 | out: | |
9a799d71 AK |
2469 | return status; |
2470 | } | |
2471 | ||
9a799d71 | 2472 | /** |
c44ade9e | 2473 | * ixgbe_acquire_swfw_sync - Acquire SWFW semaphore |
9a799d71 | 2474 | * @hw: pointer to hardware structure |
c44ade9e | 2475 | * @mask: Mask to specify which semaphore to acquire |
9a799d71 | 2476 | * |
da74cd4a | 2477 | * Acquires the SWFW semaphore through the GSSR register for the specified |
9a799d71 AK |
2478 | * function (CSR, PHY0, PHY1, EEPROM, Flash) |
2479 | **/ | |
2480 | s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u16 mask) | |
2481 | { | |
2482 | u32 gssr; | |
2483 | u32 swmask = mask; | |
2484 | u32 fwmask = mask << 5; | |
2485 | s32 timeout = 200; | |
2486 | ||
2487 | while (timeout) { | |
dbf893ee ET |
2488 | /* |
2489 | * SW EEPROM semaphore bit is used for access to all | |
2490 | * SW_FW_SYNC/GSSR bits (not just EEPROM) | |
2491 | */ | |
9a799d71 | 2492 | if (ixgbe_get_eeprom_semaphore(hw)) |
539e5f02 | 2493 | return IXGBE_ERR_SWFW_SYNC; |
9a799d71 AK |
2494 | |
2495 | gssr = IXGBE_READ_REG(hw, IXGBE_GSSR); | |
2496 | if (!(gssr & (fwmask | swmask))) | |
2497 | break; | |
2498 | ||
2499 | /* | |
2500 | * Firmware currently using resource (fwmask) or other software | |
2501 | * thread currently using resource (swmask) | |
2502 | */ | |
2503 | ixgbe_release_eeprom_semaphore(hw); | |
032b4325 | 2504 | usleep_range(5000, 10000); |
9a799d71 AK |
2505 | timeout--; |
2506 | } | |
2507 | ||
2508 | if (!timeout) { | |
dbf893ee | 2509 | hw_dbg(hw, "Driver can't access resource, SW_FW_SYNC timeout.\n"); |
539e5f02 | 2510 | return IXGBE_ERR_SWFW_SYNC; |
9a799d71 AK |
2511 | } |
2512 | ||
2513 | gssr |= swmask; | |
2514 | IXGBE_WRITE_REG(hw, IXGBE_GSSR, gssr); | |
2515 | ||
2516 | ixgbe_release_eeprom_semaphore(hw); | |
2517 | return 0; | |
2518 | } | |
2519 | ||
2520 | /** | |
2521 | * ixgbe_release_swfw_sync - Release SWFW semaphore | |
2522 | * @hw: pointer to hardware structure | |
c44ade9e | 2523 | * @mask: Mask to specify which semaphore to release |
9a799d71 | 2524 | * |
da74cd4a | 2525 | * Releases the SWFW semaphore through the GSSR register for the specified |
9a799d71 AK |
2526 | * function (CSR, PHY0, PHY1, EEPROM, Flash) |
2527 | **/ | |
2528 | void ixgbe_release_swfw_sync(struct ixgbe_hw *hw, u16 mask) | |
2529 | { | |
2530 | u32 gssr; | |
2531 | u32 swmask = mask; | |
2532 | ||
2533 | ixgbe_get_eeprom_semaphore(hw); | |
2534 | ||
2535 | gssr = IXGBE_READ_REG(hw, IXGBE_GSSR); | |
2536 | gssr &= ~swmask; | |
2537 | IXGBE_WRITE_REG(hw, IXGBE_GSSR, gssr); | |
2538 | ||
2539 | ixgbe_release_eeprom_semaphore(hw); | |
2540 | } | |
2541 | ||
d2f5e7f3 AS |
2542 | /** |
2543 | * ixgbe_disable_rx_buff_generic - Stops the receive data path | |
2544 | * @hw: pointer to hardware structure | |
2545 | * | |
2546 | * Stops the receive data path and waits for the HW to internally | |
2547 | * empty the Rx security block. | |
2548 | **/ | |
2549 | s32 ixgbe_disable_rx_buff_generic(struct ixgbe_hw *hw) | |
2550 | { | |
2551 | #define IXGBE_MAX_SECRX_POLL 40 | |
2552 | int i; | |
2553 | int secrxreg; | |
2554 | ||
2555 | secrxreg = IXGBE_READ_REG(hw, IXGBE_SECRXCTRL); | |
2556 | secrxreg |= IXGBE_SECRXCTRL_RX_DIS; | |
2557 | IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, secrxreg); | |
2558 | for (i = 0; i < IXGBE_MAX_SECRX_POLL; i++) { | |
2559 | secrxreg = IXGBE_READ_REG(hw, IXGBE_SECRXSTAT); | |
2560 | if (secrxreg & IXGBE_SECRXSTAT_SECRX_RDY) | |
2561 | break; | |
2562 | else | |
2563 | /* Use interrupt-safe sleep just in case */ | |
db76ad47 | 2564 | udelay(1000); |
d2f5e7f3 AS |
2565 | } |
2566 | ||
2567 | /* For informational purposes only */ | |
2568 | if (i >= IXGBE_MAX_SECRX_POLL) | |
2569 | hw_dbg(hw, "Rx unit being enabled before security " | |
2570 | "path fully disabled. Continuing with init.\n"); | |
2571 | ||
2572 | return 0; | |
2573 | ||
2574 | } | |
2575 | ||
2576 | /** | |
2577 | * ixgbe_enable_rx_buff - Enables the receive data path | |
2578 | * @hw: pointer to hardware structure | |
2579 | * | |
2580 | * Enables the receive data path | |
2581 | **/ | |
2582 | s32 ixgbe_enable_rx_buff_generic(struct ixgbe_hw *hw) | |
2583 | { | |
2584 | int secrxreg; | |
2585 | ||
2586 | secrxreg = IXGBE_READ_REG(hw, IXGBE_SECRXCTRL); | |
2587 | secrxreg &= ~IXGBE_SECRXCTRL_RX_DIS; | |
2588 | IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, secrxreg); | |
2589 | IXGBE_WRITE_FLUSH(hw); | |
2590 | ||
2591 | return 0; | |
2592 | } | |
2593 | ||
11afc1b1 PW |
2594 | /** |
2595 | * ixgbe_enable_rx_dma_generic - Enable the Rx DMA unit | |
2596 | * @hw: pointer to hardware structure | |
2597 | * @regval: register value to write to RXCTRL | |
2598 | * | |
2599 | * Enables the Rx DMA unit | |
2600 | **/ | |
2601 | s32 ixgbe_enable_rx_dma_generic(struct ixgbe_hw *hw, u32 regval) | |
2602 | { | |
2603 | IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, regval); | |
2604 | ||
2605 | return 0; | |
2606 | } | |
87c12017 PW |
2607 | |
2608 | /** | |
2609 | * ixgbe_blink_led_start_generic - Blink LED based on index. | |
2610 | * @hw: pointer to hardware structure | |
2611 | * @index: led number to blink | |
2612 | **/ | |
2613 | s32 ixgbe_blink_led_start_generic(struct ixgbe_hw *hw, u32 index) | |
2614 | { | |
2615 | ixgbe_link_speed speed = 0; | |
3db1cd5c | 2616 | bool link_up = false; |
87c12017 PW |
2617 | u32 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); |
2618 | u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); | |
2619 | ||
2620 | /* | |
2621 | * Link must be up to auto-blink the LEDs; | |
2622 | * Force it if link is down. | |
2623 | */ | |
2624 | hw->mac.ops.check_link(hw, &speed, &link_up, false); | |
2625 | ||
2626 | if (!link_up) { | |
50ac58ba | 2627 | autoc_reg |= IXGBE_AUTOC_AN_RESTART; |
87c12017 PW |
2628 | autoc_reg |= IXGBE_AUTOC_FLU; |
2629 | IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg); | |
945a5151 | 2630 | IXGBE_WRITE_FLUSH(hw); |
032b4325 | 2631 | usleep_range(10000, 20000); |
87c12017 PW |
2632 | } |
2633 | ||
2634 | led_reg &= ~IXGBE_LED_MODE_MASK(index); | |
2635 | led_reg |= IXGBE_LED_BLINK(index); | |
2636 | IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg); | |
2637 | IXGBE_WRITE_FLUSH(hw); | |
2638 | ||
2639 | return 0; | |
2640 | } | |
2641 | ||
2642 | /** | |
2643 | * ixgbe_blink_led_stop_generic - Stop blinking LED based on index. | |
2644 | * @hw: pointer to hardware structure | |
2645 | * @index: led number to stop blinking | |
2646 | **/ | |
2647 | s32 ixgbe_blink_led_stop_generic(struct ixgbe_hw *hw, u32 index) | |
2648 | { | |
2649 | u32 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); | |
2650 | u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); | |
2651 | ||
2652 | autoc_reg &= ~IXGBE_AUTOC_FLU; | |
2653 | autoc_reg |= IXGBE_AUTOC_AN_RESTART; | |
2654 | IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg); | |
2655 | ||
2656 | led_reg &= ~IXGBE_LED_MODE_MASK(index); | |
2657 | led_reg &= ~IXGBE_LED_BLINK(index); | |
2658 | led_reg |= IXGBE_LED_LINK_ACTIVE << IXGBE_LED_MODE_SHIFT(index); | |
2659 | IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg); | |
2660 | IXGBE_WRITE_FLUSH(hw); | |
2661 | ||
2662 | return 0; | |
2663 | } | |
21ce849b MC |
2664 | |
2665 | /** | |
2666 | * ixgbe_get_san_mac_addr_offset - Get SAN MAC address offset from the EEPROM | |
2667 | * @hw: pointer to hardware structure | |
2668 | * @san_mac_offset: SAN MAC address offset | |
2669 | * | |
2670 | * This function will read the EEPROM location for the SAN MAC address | |
2671 | * pointer, and returns the value at that location. This is used in both | |
2672 | * get and set mac_addr routines. | |
2673 | **/ | |
2674 | static s32 ixgbe_get_san_mac_addr_offset(struct ixgbe_hw *hw, | |
2675 | u16 *san_mac_offset) | |
2676 | { | |
2677 | /* | |
2678 | * First read the EEPROM pointer to see if the MAC addresses are | |
2679 | * available. | |
2680 | */ | |
2681 | hw->eeprom.ops.read(hw, IXGBE_SAN_MAC_ADDR_PTR, san_mac_offset); | |
2682 | ||
2683 | return 0; | |
2684 | } | |
2685 | ||
2686 | /** | |
2687 | * ixgbe_get_san_mac_addr_generic - SAN MAC address retrieval from the EEPROM | |
2688 | * @hw: pointer to hardware structure | |
2689 | * @san_mac_addr: SAN MAC address | |
2690 | * | |
2691 | * Reads the SAN MAC address from the EEPROM, if it's available. This is | |
2692 | * per-port, so set_lan_id() must be called before reading the addresses. | |
2693 | * set_lan_id() is called by identify_sfp(), but this cannot be relied | |
2694 | * upon for non-SFP connections, so we must call it here. | |
2695 | **/ | |
2696 | s32 ixgbe_get_san_mac_addr_generic(struct ixgbe_hw *hw, u8 *san_mac_addr) | |
2697 | { | |
2698 | u16 san_mac_data, san_mac_offset; | |
2699 | u8 i; | |
2700 | ||
2701 | /* | |
2702 | * First read the EEPROM pointer to see if the MAC addresses are | |
2703 | * available. If they're not, no point in calling set_lan_id() here. | |
2704 | */ | |
2705 | ixgbe_get_san_mac_addr_offset(hw, &san_mac_offset); | |
2706 | ||
2707 | if ((san_mac_offset == 0) || (san_mac_offset == 0xFFFF)) { | |
2708 | /* | |
2709 | * No addresses available in this EEPROM. It's not an | |
2710 | * error though, so just wipe the local address and return. | |
2711 | */ | |
2712 | for (i = 0; i < 6; i++) | |
2713 | san_mac_addr[i] = 0xFF; | |
2714 | ||
2715 | goto san_mac_addr_out; | |
2716 | } | |
2717 | ||
2718 | /* make sure we know which port we need to program */ | |
2719 | hw->mac.ops.set_lan_id(hw); | |
2720 | /* apply the port offset to the address offset */ | |
2721 | (hw->bus.func) ? (san_mac_offset += IXGBE_SAN_MAC_ADDR_PORT1_OFFSET) : | |
2722 | (san_mac_offset += IXGBE_SAN_MAC_ADDR_PORT0_OFFSET); | |
2723 | for (i = 0; i < 3; i++) { | |
2724 | hw->eeprom.ops.read(hw, san_mac_offset, &san_mac_data); | |
2725 | san_mac_addr[i * 2] = (u8)(san_mac_data); | |
2726 | san_mac_addr[i * 2 + 1] = (u8)(san_mac_data >> 8); | |
2727 | san_mac_offset++; | |
2728 | } | |
2729 | ||
2730 | san_mac_addr_out: | |
2731 | return 0; | |
2732 | } | |
2733 | ||
2734 | /** | |
2735 | * ixgbe_get_pcie_msix_count_generic - Gets MSI-X vector count | |
2736 | * @hw: pointer to hardware structure | |
2737 | * | |
2738 | * Read PCIe configuration space, and get the MSI-X vector count from | |
2739 | * the capabilities table. | |
2740 | **/ | |
71161302 | 2741 | u16 ixgbe_get_pcie_msix_count_generic(struct ixgbe_hw *hw) |
21ce849b MC |
2742 | { |
2743 | struct ixgbe_adapter *adapter = hw->back; | |
71161302 ET |
2744 | u16 msix_count = 1; |
2745 | u16 max_msix_count; | |
2746 | u16 pcie_offset; | |
2747 | ||
2748 | switch (hw->mac.type) { | |
2749 | case ixgbe_mac_82598EB: | |
2750 | pcie_offset = IXGBE_PCIE_MSIX_82598_CAPS; | |
2751 | max_msix_count = IXGBE_MAX_MSIX_VECTORS_82598; | |
2752 | break; | |
2753 | case ixgbe_mac_82599EB: | |
2754 | case ixgbe_mac_X540: | |
2755 | pcie_offset = IXGBE_PCIE_MSIX_82599_CAPS; | |
2756 | max_msix_count = IXGBE_MAX_MSIX_VECTORS_82599; | |
2757 | break; | |
2758 | default: | |
2759 | return msix_count; | |
2760 | } | |
2761 | ||
2762 | pci_read_config_word(adapter->pdev, pcie_offset, &msix_count); | |
21ce849b MC |
2763 | msix_count &= IXGBE_PCIE_MSIX_TBL_SZ_MASK; |
2764 | ||
71161302 | 2765 | /* MSI-X count is zero-based in HW */ |
21ce849b MC |
2766 | msix_count++; |
2767 | ||
71161302 ET |
2768 | if (msix_count > max_msix_count) |
2769 | msix_count = max_msix_count; | |
2770 | ||
21ce849b MC |
2771 | return msix_count; |
2772 | } | |
2773 | ||
2774 | /** | |
2775 | * ixgbe_clear_vmdq_generic - Disassociate a VMDq pool index from a rx address | |
2776 | * @hw: pointer to hardware struct | |
2777 | * @rar: receive address register index to disassociate | |
2778 | * @vmdq: VMDq pool index to remove from the rar | |
2779 | **/ | |
2780 | s32 ixgbe_clear_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq) | |
2781 | { | |
2782 | u32 mpsar_lo, mpsar_hi; | |
2783 | u32 rar_entries = hw->mac.num_rar_entries; | |
2784 | ||
c700f4e6 ET |
2785 | /* Make sure we are using a valid rar index range */ |
2786 | if (rar >= rar_entries) { | |
2787 | hw_dbg(hw, "RAR index %d is out of range.\n", rar); | |
2788 | return IXGBE_ERR_INVALID_ARGUMENT; | |
2789 | } | |
21ce849b | 2790 | |
c700f4e6 ET |
2791 | mpsar_lo = IXGBE_READ_REG(hw, IXGBE_MPSAR_LO(rar)); |
2792 | mpsar_hi = IXGBE_READ_REG(hw, IXGBE_MPSAR_HI(rar)); | |
21ce849b | 2793 | |
c700f4e6 ET |
2794 | if (!mpsar_lo && !mpsar_hi) |
2795 | goto done; | |
21ce849b | 2796 | |
c700f4e6 ET |
2797 | if (vmdq == IXGBE_CLEAR_VMDQ_ALL) { |
2798 | if (mpsar_lo) { | |
2799 | IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), 0); | |
2800 | mpsar_lo = 0; | |
2801 | } | |
2802 | if (mpsar_hi) { | |
2803 | IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), 0); | |
2804 | mpsar_hi = 0; | |
2805 | } | |
2806 | } else if (vmdq < 32) { | |
2807 | mpsar_lo &= ~(1 << vmdq); | |
2808 | IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), mpsar_lo); | |
21ce849b | 2809 | } else { |
c700f4e6 ET |
2810 | mpsar_hi &= ~(1 << (vmdq - 32)); |
2811 | IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), mpsar_hi); | |
21ce849b MC |
2812 | } |
2813 | ||
c700f4e6 ET |
2814 | /* was that the last pool using this rar? */ |
2815 | if (mpsar_lo == 0 && mpsar_hi == 0 && rar != 0) | |
2816 | hw->mac.ops.clear_rar(hw, rar); | |
21ce849b MC |
2817 | done: |
2818 | return 0; | |
2819 | } | |
2820 | ||
2821 | /** | |
2822 | * ixgbe_set_vmdq_generic - Associate a VMDq pool index with a rx address | |
2823 | * @hw: pointer to hardware struct | |
2824 | * @rar: receive address register index to associate with a VMDq index | |
2825 | * @vmdq: VMDq pool index | |
2826 | **/ | |
2827 | s32 ixgbe_set_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq) | |
2828 | { | |
2829 | u32 mpsar; | |
2830 | u32 rar_entries = hw->mac.num_rar_entries; | |
2831 | ||
c700f4e6 ET |
2832 | /* Make sure we are using a valid rar index range */ |
2833 | if (rar >= rar_entries) { | |
21ce849b | 2834 | hw_dbg(hw, "RAR index %d is out of range.\n", rar); |
c700f4e6 ET |
2835 | return IXGBE_ERR_INVALID_ARGUMENT; |
2836 | } | |
2837 | ||
2838 | if (vmdq < 32) { | |
2839 | mpsar = IXGBE_READ_REG(hw, IXGBE_MPSAR_LO(rar)); | |
2840 | mpsar |= 1 << vmdq; | |
2841 | IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), mpsar); | |
2842 | } else { | |
2843 | mpsar = IXGBE_READ_REG(hw, IXGBE_MPSAR_HI(rar)); | |
2844 | mpsar |= 1 << (vmdq - 32); | |
2845 | IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), mpsar); | |
21ce849b MC |
2846 | } |
2847 | return 0; | |
2848 | } | |
2849 | ||
2850 | /** | |
2851 | * ixgbe_init_uta_tables_generic - Initialize the Unicast Table Array | |
2852 | * @hw: pointer to hardware structure | |
2853 | **/ | |
2854 | s32 ixgbe_init_uta_tables_generic(struct ixgbe_hw *hw) | |
2855 | { | |
2856 | int i; | |
2857 | ||
21ce849b MC |
2858 | for (i = 0; i < 128; i++) |
2859 | IXGBE_WRITE_REG(hw, IXGBE_UTA(i), 0); | |
2860 | ||
2861 | return 0; | |
2862 | } | |
2863 | ||
2864 | /** | |
2865 | * ixgbe_find_vlvf_slot - find the vlanid or the first empty slot | |
2866 | * @hw: pointer to hardware structure | |
2867 | * @vlan: VLAN id to write to VLAN filter | |
2868 | * | |
2869 | * return the VLVF index where this VLAN id should be placed | |
2870 | * | |
2871 | **/ | |
5d5b7c39 | 2872 | static s32 ixgbe_find_vlvf_slot(struct ixgbe_hw *hw, u32 vlan) |
21ce849b MC |
2873 | { |
2874 | u32 bits = 0; | |
2875 | u32 first_empty_slot = 0; | |
2876 | s32 regindex; | |
2877 | ||
2878 | /* short cut the special case */ | |
2879 | if (vlan == 0) | |
2880 | return 0; | |
2881 | ||
2882 | /* | |
2883 | * Search for the vlan id in the VLVF entries. Save off the first empty | |
2884 | * slot found along the way | |
2885 | */ | |
2886 | for (regindex = 1; regindex < IXGBE_VLVF_ENTRIES; regindex++) { | |
2887 | bits = IXGBE_READ_REG(hw, IXGBE_VLVF(regindex)); | |
2888 | if (!bits && !(first_empty_slot)) | |
2889 | first_empty_slot = regindex; | |
2890 | else if ((bits & 0x0FFF) == vlan) | |
2891 | break; | |
2892 | } | |
2893 | ||
2894 | /* | |
2895 | * If regindex is less than IXGBE_VLVF_ENTRIES, then we found the vlan | |
2896 | * in the VLVF. Else use the first empty VLVF register for this | |
2897 | * vlan id. | |
2898 | */ | |
2899 | if (regindex >= IXGBE_VLVF_ENTRIES) { | |
2900 | if (first_empty_slot) | |
2901 | regindex = first_empty_slot; | |
2902 | else { | |
2903 | hw_dbg(hw, "No space in VLVF.\n"); | |
2904 | regindex = IXGBE_ERR_NO_SPACE; | |
2905 | } | |
2906 | } | |
2907 | ||
2908 | return regindex; | |
2909 | } | |
2910 | ||
2911 | /** | |
2912 | * ixgbe_set_vfta_generic - Set VLAN filter table | |
2913 | * @hw: pointer to hardware structure | |
2914 | * @vlan: VLAN id to write to VLAN filter | |
2915 | * @vind: VMDq output index that maps queue to VLAN id in VFVFB | |
2916 | * @vlan_on: boolean flag to turn on/off VLAN in VFVF | |
2917 | * | |
2918 | * Turn on/off specified VLAN in the VLAN filter table. | |
2919 | **/ | |
2920 | s32 ixgbe_set_vfta_generic(struct ixgbe_hw *hw, u32 vlan, u32 vind, | |
2921 | bool vlan_on) | |
2922 | { | |
2923 | s32 regindex; | |
2924 | u32 bitindex; | |
2925 | u32 vfta; | |
2926 | u32 bits; | |
2927 | u32 vt; | |
2928 | u32 targetbit; | |
2929 | bool vfta_changed = false; | |
2930 | ||
2931 | if (vlan > 4095) | |
2932 | return IXGBE_ERR_PARAM; | |
2933 | ||
2934 | /* | |
2935 | * this is a 2 part operation - first the VFTA, then the | |
2936 | * VLVF and VLVFB if VT Mode is set | |
2937 | * We don't write the VFTA until we know the VLVF part succeeded. | |
2938 | */ | |
2939 | ||
2940 | /* Part 1 | |
2941 | * The VFTA is a bitstring made up of 128 32-bit registers | |
2942 | * that enable the particular VLAN id, much like the MTA: | |
2943 | * bits[11-5]: which register | |
2944 | * bits[4-0]: which bit in the register | |
2945 | */ | |
2946 | regindex = (vlan >> 5) & 0x7F; | |
2947 | bitindex = vlan & 0x1F; | |
2948 | targetbit = (1 << bitindex); | |
2949 | vfta = IXGBE_READ_REG(hw, IXGBE_VFTA(regindex)); | |
2950 | ||
2951 | if (vlan_on) { | |
2952 | if (!(vfta & targetbit)) { | |
2953 | vfta |= targetbit; | |
2954 | vfta_changed = true; | |
2955 | } | |
2956 | } else { | |
2957 | if ((vfta & targetbit)) { | |
2958 | vfta &= ~targetbit; | |
2959 | vfta_changed = true; | |
2960 | } | |
2961 | } | |
2962 | ||
2963 | /* Part 2 | |
2964 | * If VT Mode is set | |
2965 | * Either vlan_on | |
2966 | * make sure the vlan is in VLVF | |
2967 | * set the vind bit in the matching VLVFB | |
2968 | * Or !vlan_on | |
2969 | * clear the pool bit and possibly the vind | |
2970 | */ | |
2971 | vt = IXGBE_READ_REG(hw, IXGBE_VT_CTL); | |
2972 | if (vt & IXGBE_VT_CTL_VT_ENABLE) { | |
2973 | s32 vlvf_index; | |
2974 | ||
2975 | vlvf_index = ixgbe_find_vlvf_slot(hw, vlan); | |
2976 | if (vlvf_index < 0) | |
2977 | return vlvf_index; | |
2978 | ||
2979 | if (vlan_on) { | |
2980 | /* set the pool bit */ | |
2981 | if (vind < 32) { | |
2982 | bits = IXGBE_READ_REG(hw, | |
2983 | IXGBE_VLVFB(vlvf_index*2)); | |
2984 | bits |= (1 << vind); | |
2985 | IXGBE_WRITE_REG(hw, | |
2986 | IXGBE_VLVFB(vlvf_index*2), | |
2987 | bits); | |
2988 | } else { | |
2989 | bits = IXGBE_READ_REG(hw, | |
2990 | IXGBE_VLVFB((vlvf_index*2)+1)); | |
2991 | bits |= (1 << (vind-32)); | |
2992 | IXGBE_WRITE_REG(hw, | |
2993 | IXGBE_VLVFB((vlvf_index*2)+1), | |
2994 | bits); | |
2995 | } | |
2996 | } else { | |
2997 | /* clear the pool bit */ | |
2998 | if (vind < 32) { | |
2999 | bits = IXGBE_READ_REG(hw, | |
3000 | IXGBE_VLVFB(vlvf_index*2)); | |
3001 | bits &= ~(1 << vind); | |
3002 | IXGBE_WRITE_REG(hw, | |
3003 | IXGBE_VLVFB(vlvf_index*2), | |
3004 | bits); | |
3005 | bits |= IXGBE_READ_REG(hw, | |
3006 | IXGBE_VLVFB((vlvf_index*2)+1)); | |
3007 | } else { | |
3008 | bits = IXGBE_READ_REG(hw, | |
3009 | IXGBE_VLVFB((vlvf_index*2)+1)); | |
3010 | bits &= ~(1 << (vind-32)); | |
3011 | IXGBE_WRITE_REG(hw, | |
3012 | IXGBE_VLVFB((vlvf_index*2)+1), | |
3013 | bits); | |
3014 | bits |= IXGBE_READ_REG(hw, | |
3015 | IXGBE_VLVFB(vlvf_index*2)); | |
3016 | } | |
3017 | } | |
3018 | ||
3019 | /* | |
3020 | * If there are still bits set in the VLVFB registers | |
3021 | * for the VLAN ID indicated we need to see if the | |
3022 | * caller is requesting that we clear the VFTA entry bit. | |
3023 | * If the caller has requested that we clear the VFTA | |
3024 | * entry bit but there are still pools/VFs using this VLAN | |
3025 | * ID entry then ignore the request. We're not worried | |
3026 | * about the case where we're turning the VFTA VLAN ID | |
3027 | * entry bit on, only when requested to turn it off as | |
3028 | * there may be multiple pools and/or VFs using the | |
3029 | * VLAN ID entry. In that case we cannot clear the | |
3030 | * VFTA bit until all pools/VFs using that VLAN ID have also | |
3031 | * been cleared. This will be indicated by "bits" being | |
3032 | * zero. | |
3033 | */ | |
3034 | if (bits) { | |
3035 | IXGBE_WRITE_REG(hw, IXGBE_VLVF(vlvf_index), | |
3036 | (IXGBE_VLVF_VIEN | vlan)); | |
3037 | if (!vlan_on) { | |
3038 | /* someone wants to clear the vfta entry | |
3039 | * but some pools/VFs are still using it. | |
3040 | * Ignore it. */ | |
3041 | vfta_changed = false; | |
3042 | } | |
3043 | } | |
3044 | else | |
3045 | IXGBE_WRITE_REG(hw, IXGBE_VLVF(vlvf_index), 0); | |
3046 | } | |
3047 | ||
3048 | if (vfta_changed) | |
3049 | IXGBE_WRITE_REG(hw, IXGBE_VFTA(regindex), vfta); | |
3050 | ||
3051 | return 0; | |
3052 | } | |
3053 | ||
3054 | /** | |
3055 | * ixgbe_clear_vfta_generic - Clear VLAN filter table | |
3056 | * @hw: pointer to hardware structure | |
3057 | * | |
3058 | * Clears the VLAN filer table, and the VMDq index associated with the filter | |
3059 | **/ | |
3060 | s32 ixgbe_clear_vfta_generic(struct ixgbe_hw *hw) | |
3061 | { | |
3062 | u32 offset; | |
3063 | ||
3064 | for (offset = 0; offset < hw->mac.vft_size; offset++) | |
3065 | IXGBE_WRITE_REG(hw, IXGBE_VFTA(offset), 0); | |
3066 | ||
3067 | for (offset = 0; offset < IXGBE_VLVF_ENTRIES; offset++) { | |
3068 | IXGBE_WRITE_REG(hw, IXGBE_VLVF(offset), 0); | |
3069 | IXGBE_WRITE_REG(hw, IXGBE_VLVFB(offset*2), 0); | |
3070 | IXGBE_WRITE_REG(hw, IXGBE_VLVFB((offset*2)+1), 0); | |
3071 | } | |
3072 | ||
3073 | return 0; | |
3074 | } | |
3075 | ||
3076 | /** | |
3077 | * ixgbe_check_mac_link_generic - Determine link and speed status | |
3078 | * @hw: pointer to hardware structure | |
3079 | * @speed: pointer to link speed | |
3080 | * @link_up: true when link is up | |
3081 | * @link_up_wait_to_complete: bool used to wait for link up or not | |
3082 | * | |
3083 | * Reads the links register to determine if link is up and the current speed | |
3084 | **/ | |
3085 | s32 ixgbe_check_mac_link_generic(struct ixgbe_hw *hw, ixgbe_link_speed *speed, | |
8c7bea32 | 3086 | bool *link_up, bool link_up_wait_to_complete) |
21ce849b | 3087 | { |
48de36c5 | 3088 | u32 links_reg, links_orig; |
21ce849b MC |
3089 | u32 i; |
3090 | ||
48de36c5 ET |
3091 | /* clear the old state */ |
3092 | links_orig = IXGBE_READ_REG(hw, IXGBE_LINKS); | |
3093 | ||
21ce849b | 3094 | links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); |
48de36c5 ET |
3095 | |
3096 | if (links_orig != links_reg) { | |
3097 | hw_dbg(hw, "LINKS changed from %08X to %08X\n", | |
3098 | links_orig, links_reg); | |
3099 | } | |
3100 | ||
21ce849b MC |
3101 | if (link_up_wait_to_complete) { |
3102 | for (i = 0; i < IXGBE_LINK_UP_TIME; i++) { | |
3103 | if (links_reg & IXGBE_LINKS_UP) { | |
3104 | *link_up = true; | |
3105 | break; | |
3106 | } else { | |
3107 | *link_up = false; | |
3108 | } | |
3109 | msleep(100); | |
3110 | links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); | |
3111 | } | |
3112 | } else { | |
3113 | if (links_reg & IXGBE_LINKS_UP) | |
3114 | *link_up = true; | |
3115 | else | |
3116 | *link_up = false; | |
3117 | } | |
3118 | ||
3119 | if ((links_reg & IXGBE_LINKS_SPEED_82599) == | |
3120 | IXGBE_LINKS_SPEED_10G_82599) | |
3121 | *speed = IXGBE_LINK_SPEED_10GB_FULL; | |
3122 | else if ((links_reg & IXGBE_LINKS_SPEED_82599) == | |
63d778df | 3123 | IXGBE_LINKS_SPEED_1G_82599) |
21ce849b | 3124 | *speed = IXGBE_LINK_SPEED_1GB_FULL; |
63d778df ET |
3125 | else if ((links_reg & IXGBE_LINKS_SPEED_82599) == |
3126 | IXGBE_LINKS_SPEED_100_82599) | |
21ce849b | 3127 | *speed = IXGBE_LINK_SPEED_100_FULL; |
63d778df ET |
3128 | else |
3129 | *speed = IXGBE_LINK_SPEED_UNKNOWN; | |
21ce849b | 3130 | |
21ce849b MC |
3131 | return 0; |
3132 | } | |
a391f1d5 DS |
3133 | |
3134 | /** | |
49ce9c2c | 3135 | * ixgbe_get_wwn_prefix_generic - Get alternative WWNN/WWPN prefix from |
a391f1d5 DS |
3136 | * the EEPROM |
3137 | * @hw: pointer to hardware structure | |
3138 | * @wwnn_prefix: the alternative WWNN prefix | |
3139 | * @wwpn_prefix: the alternative WWPN prefix | |
3140 | * | |
3141 | * This function will read the EEPROM from the alternative SAN MAC address | |
3142 | * block to check the support for the alternative WWNN/WWPN prefix support. | |
3143 | **/ | |
3144 | s32 ixgbe_get_wwn_prefix_generic(struct ixgbe_hw *hw, u16 *wwnn_prefix, | |
3145 | u16 *wwpn_prefix) | |
3146 | { | |
3147 | u16 offset, caps; | |
3148 | u16 alt_san_mac_blk_offset; | |
3149 | ||
3150 | /* clear output first */ | |
3151 | *wwnn_prefix = 0xFFFF; | |
3152 | *wwpn_prefix = 0xFFFF; | |
3153 | ||
3154 | /* check if alternative SAN MAC is supported */ | |
3155 | hw->eeprom.ops.read(hw, IXGBE_ALT_SAN_MAC_ADDR_BLK_PTR, | |
3156 | &alt_san_mac_blk_offset); | |
3157 | ||
3158 | if ((alt_san_mac_blk_offset == 0) || | |
3159 | (alt_san_mac_blk_offset == 0xFFFF)) | |
3160 | goto wwn_prefix_out; | |
3161 | ||
3162 | /* check capability in alternative san mac address block */ | |
3163 | offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_CAPS_OFFSET; | |
3164 | hw->eeprom.ops.read(hw, offset, &caps); | |
3165 | if (!(caps & IXGBE_ALT_SAN_MAC_ADDR_CAPS_ALTWWN)) | |
3166 | goto wwn_prefix_out; | |
3167 | ||
3168 | /* get the corresponding prefix for WWNN/WWPN */ | |
3169 | offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_WWNN_OFFSET; | |
3170 | hw->eeprom.ops.read(hw, offset, wwnn_prefix); | |
3171 | ||
3172 | offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_WWPN_OFFSET; | |
3173 | hw->eeprom.ops.read(hw, offset, wwpn_prefix); | |
3174 | ||
3175 | wwn_prefix_out: | |
3176 | return 0; | |
3177 | } | |
a985b6c3 GR |
3178 | |
3179 | /** | |
3180 | * ixgbe_set_mac_anti_spoofing - Enable/Disable MAC anti-spoofing | |
3181 | * @hw: pointer to hardware structure | |
3182 | * @enable: enable or disable switch for anti-spoofing | |
3183 | * @pf: Physical Function pool - do not enable anti-spoofing for the PF | |
3184 | * | |
3185 | **/ | |
3186 | void ixgbe_set_mac_anti_spoofing(struct ixgbe_hw *hw, bool enable, int pf) | |
3187 | { | |
3188 | int j; | |
3189 | int pf_target_reg = pf >> 3; | |
3190 | int pf_target_shift = pf % 8; | |
3191 | u32 pfvfspoof = 0; | |
3192 | ||
3193 | if (hw->mac.type == ixgbe_mac_82598EB) | |
3194 | return; | |
3195 | ||
3196 | if (enable) | |
3197 | pfvfspoof = IXGBE_SPOOF_MACAS_MASK; | |
3198 | ||
3199 | /* | |
3200 | * PFVFSPOOF register array is size 8 with 8 bits assigned to | |
3201 | * MAC anti-spoof enables in each register array element. | |
3202 | */ | |
3203 | for (j = 0; j < IXGBE_PFVFSPOOF_REG_COUNT; j++) | |
3204 | IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(j), pfvfspoof); | |
3205 | ||
3206 | /* If not enabling anti-spoofing then done */ | |
3207 | if (!enable) | |
3208 | return; | |
3209 | ||
3210 | /* | |
3211 | * The PF should be allowed to spoof so that it can support | |
3212 | * emulation mode NICs. Reset the bit assigned to the PF | |
3213 | */ | |
3214 | pfvfspoof = IXGBE_READ_REG(hw, IXGBE_PFVFSPOOF(pf_target_reg)); | |
3215 | pfvfspoof ^= (1 << pf_target_shift); | |
3216 | IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(pf_target_reg), pfvfspoof); | |
3217 | } | |
3218 | ||
3219 | /** | |
3220 | * ixgbe_set_vlan_anti_spoofing - Enable/Disable VLAN anti-spoofing | |
3221 | * @hw: pointer to hardware structure | |
3222 | * @enable: enable or disable switch for VLAN anti-spoofing | |
3223 | * @pf: Virtual Function pool - VF Pool to set for VLAN anti-spoofing | |
3224 | * | |
3225 | **/ | |
3226 | void ixgbe_set_vlan_anti_spoofing(struct ixgbe_hw *hw, bool enable, int vf) | |
3227 | { | |
3228 | int vf_target_reg = vf >> 3; | |
3229 | int vf_target_shift = vf % 8 + IXGBE_SPOOF_VLANAS_SHIFT; | |
3230 | u32 pfvfspoof; | |
3231 | ||
3232 | if (hw->mac.type == ixgbe_mac_82598EB) | |
3233 | return; | |
3234 | ||
3235 | pfvfspoof = IXGBE_READ_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg)); | |
3236 | if (enable) | |
3237 | pfvfspoof |= (1 << vf_target_shift); | |
3238 | else | |
3239 | pfvfspoof &= ~(1 << vf_target_shift); | |
3240 | IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg), pfvfspoof); | |
3241 | } | |
b776d104 ET |
3242 | |
3243 | /** | |
3244 | * ixgbe_get_device_caps_generic - Get additional device capabilities | |
3245 | * @hw: pointer to hardware structure | |
3246 | * @device_caps: the EEPROM word with the extra device capabilities | |
3247 | * | |
3248 | * This function will read the EEPROM location for the device capabilities, | |
3249 | * and return the word through device_caps. | |
3250 | **/ | |
3251 | s32 ixgbe_get_device_caps_generic(struct ixgbe_hw *hw, u16 *device_caps) | |
3252 | { | |
3253 | hw->eeprom.ops.read(hw, IXGBE_DEVICE_CAPS, device_caps); | |
3254 | ||
3255 | return 0; | |
3256 | } | |
80605c65 JF |
3257 | |
3258 | /** | |
3259 | * ixgbe_set_rxpba_generic - Initialize RX packet buffer | |
3260 | * @hw: pointer to hardware structure | |
3261 | * @num_pb: number of packet buffers to allocate | |
3262 | * @headroom: reserve n KB of headroom | |
3263 | * @strategy: packet buffer allocation strategy | |
3264 | **/ | |
3265 | void ixgbe_set_rxpba_generic(struct ixgbe_hw *hw, | |
3266 | int num_pb, | |
3267 | u32 headroom, | |
3268 | int strategy) | |
3269 | { | |
3270 | u32 pbsize = hw->mac.rx_pb_size; | |
3271 | int i = 0; | |
3272 | u32 rxpktsize, txpktsize, txpbthresh; | |
3273 | ||
3274 | /* Reserve headroom */ | |
3275 | pbsize -= headroom; | |
3276 | ||
3277 | if (!num_pb) | |
3278 | num_pb = 1; | |
3279 | ||
3280 | /* Divide remaining packet buffer space amongst the number | |
3281 | * of packet buffers requested using supplied strategy. | |
3282 | */ | |
3283 | switch (strategy) { | |
3284 | case (PBA_STRATEGY_WEIGHTED): | |
3285 | /* pba_80_48 strategy weight first half of packet buffer with | |
3286 | * 5/8 of the packet buffer space. | |
3287 | */ | |
3288 | rxpktsize = ((pbsize * 5 * 2) / (num_pb * 8)); | |
3289 | pbsize -= rxpktsize * (num_pb / 2); | |
3290 | rxpktsize <<= IXGBE_RXPBSIZE_SHIFT; | |
3291 | for (; i < (num_pb / 2); i++) | |
3292 | IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpktsize); | |
3293 | /* Fall through to configure remaining packet buffers */ | |
3294 | case (PBA_STRATEGY_EQUAL): | |
3295 | /* Divide the remaining Rx packet buffer evenly among the TCs */ | |
3296 | rxpktsize = (pbsize / (num_pb - i)) << IXGBE_RXPBSIZE_SHIFT; | |
3297 | for (; i < num_pb; i++) | |
3298 | IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpktsize); | |
3299 | break; | |
3300 | default: | |
3301 | break; | |
3302 | } | |
3303 | ||
3304 | /* | |
3305 | * Setup Tx packet buffer and threshold equally for all TCs | |
3306 | * TXPBTHRESH register is set in K so divide by 1024 and subtract | |
3307 | * 10 since the largest packet we support is just over 9K. | |
3308 | */ | |
3309 | txpktsize = IXGBE_TXPBSIZE_MAX / num_pb; | |
3310 | txpbthresh = (txpktsize / 1024) - IXGBE_TXPKT_SIZE_MAX; | |
3311 | for (i = 0; i < num_pb; i++) { | |
3312 | IXGBE_WRITE_REG(hw, IXGBE_TXPBSIZE(i), txpktsize); | |
3313 | IXGBE_WRITE_REG(hw, IXGBE_TXPBTHRESH(i), txpbthresh); | |
3314 | } | |
3315 | ||
3316 | /* Clear unused TCs, if any, to zero buffer size*/ | |
3317 | for (; i < IXGBE_MAX_PB; i++) { | |
3318 | IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), 0); | |
3319 | IXGBE_WRITE_REG(hw, IXGBE_TXPBSIZE(i), 0); | |
3320 | IXGBE_WRITE_REG(hw, IXGBE_TXPBTHRESH(i), 0); | |
3321 | } | |
3322 | } | |
9612de92 ET |
3323 | |
3324 | /** | |
3325 | * ixgbe_calculate_checksum - Calculate checksum for buffer | |
3326 | * @buffer: pointer to EEPROM | |
3327 | * @length: size of EEPROM to calculate a checksum for | |
49ce9c2c | 3328 | * |
9612de92 ET |
3329 | * Calculates the checksum for some buffer on a specified length. The |
3330 | * checksum calculated is returned. | |
3331 | **/ | |
3332 | static u8 ixgbe_calculate_checksum(u8 *buffer, u32 length) | |
3333 | { | |
3334 | u32 i; | |
3335 | u8 sum = 0; | |
3336 | ||
3337 | if (!buffer) | |
3338 | return 0; | |
3339 | ||
3340 | for (i = 0; i < length; i++) | |
3341 | sum += buffer[i]; | |
3342 | ||
3343 | return (u8) (0 - sum); | |
3344 | } | |
3345 | ||
3346 | /** | |
3347 | * ixgbe_host_interface_command - Issue command to manageability block | |
3348 | * @hw: pointer to the HW structure | |
3349 | * @buffer: contains the command to write and where the return status will | |
3350 | * be placed | |
c466d7a7 | 3351 | * @length: length of buffer, must be multiple of 4 bytes |
9612de92 ET |
3352 | * |
3353 | * Communicates with the manageability block. On success return 0 | |
3354 | * else return IXGBE_ERR_HOST_INTERFACE_COMMAND. | |
3355 | **/ | |
79488c58 | 3356 | static s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, u32 *buffer, |
9612de92 ET |
3357 | u32 length) |
3358 | { | |
331bcf45 | 3359 | u32 hicr, i, bi; |
9612de92 ET |
3360 | u32 hdr_size = sizeof(struct ixgbe_hic_hdr); |
3361 | u8 buf_len, dword_len; | |
3362 | ||
3363 | s32 ret_val = 0; | |
3364 | ||
3365 | if (length == 0 || length & 0x3 || | |
3366 | length > IXGBE_HI_MAX_BLOCK_BYTE_LENGTH) { | |
3367 | hw_dbg(hw, "Buffer length failure.\n"); | |
3368 | ret_val = IXGBE_ERR_HOST_INTERFACE_COMMAND; | |
3369 | goto out; | |
3370 | } | |
3371 | ||
3372 | /* Check that the host interface is enabled. */ | |
3373 | hicr = IXGBE_READ_REG(hw, IXGBE_HICR); | |
3374 | if ((hicr & IXGBE_HICR_EN) == 0) { | |
3375 | hw_dbg(hw, "IXGBE_HOST_EN bit disabled.\n"); | |
3376 | ret_val = IXGBE_ERR_HOST_INTERFACE_COMMAND; | |
3377 | goto out; | |
3378 | } | |
3379 | ||
3380 | /* Calculate length in DWORDs */ | |
3381 | dword_len = length >> 2; | |
3382 | ||
3383 | /* | |
3384 | * The device driver writes the relevant command block | |
3385 | * into the ram area. | |
3386 | */ | |
3387 | for (i = 0; i < dword_len; i++) | |
3388 | IXGBE_WRITE_REG_ARRAY(hw, IXGBE_FLEX_MNG, | |
79488c58 | 3389 | i, cpu_to_le32(buffer[i])); |
9612de92 ET |
3390 | |
3391 | /* Setting this bit tells the ARC that a new command is pending. */ | |
3392 | IXGBE_WRITE_REG(hw, IXGBE_HICR, hicr | IXGBE_HICR_C); | |
3393 | ||
3394 | for (i = 0; i < IXGBE_HI_COMMAND_TIMEOUT; i++) { | |
3395 | hicr = IXGBE_READ_REG(hw, IXGBE_HICR); | |
3396 | if (!(hicr & IXGBE_HICR_C)) | |
3397 | break; | |
3398 | usleep_range(1000, 2000); | |
3399 | } | |
3400 | ||
3401 | /* Check command successful completion. */ | |
3402 | if (i == IXGBE_HI_COMMAND_TIMEOUT || | |
3403 | (!(IXGBE_READ_REG(hw, IXGBE_HICR) & IXGBE_HICR_SV))) { | |
3404 | hw_dbg(hw, "Command has failed with no status valid.\n"); | |
3405 | ret_val = IXGBE_ERR_HOST_INTERFACE_COMMAND; | |
3406 | goto out; | |
3407 | } | |
3408 | ||
3409 | /* Calculate length in DWORDs */ | |
3410 | dword_len = hdr_size >> 2; | |
3411 | ||
3412 | /* first pull in the header so we know the buffer length */ | |
331bcf45 ET |
3413 | for (bi = 0; bi < dword_len; bi++) { |
3414 | buffer[bi] = IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG, bi); | |
3415 | le32_to_cpus(&buffer[bi]); | |
79488c58 | 3416 | } |
9612de92 ET |
3417 | |
3418 | /* If there is any thing in data position pull it in */ | |
3419 | buf_len = ((struct ixgbe_hic_hdr *)buffer)->buf_len; | |
3420 | if (buf_len == 0) | |
3421 | goto out; | |
3422 | ||
3423 | if (length < (buf_len + hdr_size)) { | |
3424 | hw_dbg(hw, "Buffer not large enough for reply message.\n"); | |
3425 | ret_val = IXGBE_ERR_HOST_INTERFACE_COMMAND; | |
3426 | goto out; | |
3427 | } | |
3428 | ||
331bcf45 ET |
3429 | /* Calculate length in DWORDs, add 3 for odd lengths */ |
3430 | dword_len = (buf_len + 3) >> 2; | |
9612de92 | 3431 | |
331bcf45 ET |
3432 | /* Pull in the rest of the buffer (bi is where we left off)*/ |
3433 | for (; bi <= dword_len; bi++) { | |
3434 | buffer[bi] = IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG, bi); | |
3435 | le32_to_cpus(&buffer[bi]); | |
3436 | } | |
9612de92 ET |
3437 | |
3438 | out: | |
3439 | return ret_val; | |
3440 | } | |
3441 | ||
3442 | /** | |
3443 | * ixgbe_set_fw_drv_ver_generic - Sends driver version to firmware | |
3444 | * @hw: pointer to the HW structure | |
3445 | * @maj: driver version major number | |
3446 | * @min: driver version minor number | |
3447 | * @build: driver version build number | |
3448 | * @sub: driver version sub build number | |
3449 | * | |
3450 | * Sends driver version number to firmware through the manageability | |
3451 | * block. On success return 0 | |
3452 | * else returns IXGBE_ERR_SWFW_SYNC when encountering an error acquiring | |
3453 | * semaphore or IXGBE_ERR_HOST_INTERFACE_COMMAND when command fails. | |
3454 | **/ | |
3455 | s32 ixgbe_set_fw_drv_ver_generic(struct ixgbe_hw *hw, u8 maj, u8 min, | |
3456 | u8 build, u8 sub) | |
3457 | { | |
3458 | struct ixgbe_hic_drv_info fw_cmd; | |
3459 | int i; | |
3460 | s32 ret_val = 0; | |
3461 | ||
3462 | if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_SW_MNG_SM) != 0) { | |
3463 | ret_val = IXGBE_ERR_SWFW_SYNC; | |
3464 | goto out; | |
3465 | } | |
3466 | ||
3467 | fw_cmd.hdr.cmd = FW_CEM_CMD_DRIVER_INFO; | |
3468 | fw_cmd.hdr.buf_len = FW_CEM_CMD_DRIVER_INFO_LEN; | |
3469 | fw_cmd.hdr.cmd_or_resp.cmd_resv = FW_CEM_CMD_RESERVED; | |
3470 | fw_cmd.port_num = (u8)hw->bus.func; | |
3471 | fw_cmd.ver_maj = maj; | |
3472 | fw_cmd.ver_min = min; | |
3473 | fw_cmd.ver_build = build; | |
3474 | fw_cmd.ver_sub = sub; | |
3475 | fw_cmd.hdr.checksum = 0; | |
3476 | fw_cmd.hdr.checksum = ixgbe_calculate_checksum((u8 *)&fw_cmd, | |
3477 | (FW_CEM_HDR_LEN + fw_cmd.hdr.buf_len)); | |
3478 | fw_cmd.pad = 0; | |
3479 | fw_cmd.pad2 = 0; | |
3480 | ||
3481 | for (i = 0; i <= FW_CEM_MAX_RETRIES; i++) { | |
79488c58 | 3482 | ret_val = ixgbe_host_interface_command(hw, (u32 *)&fw_cmd, |
9612de92 ET |
3483 | sizeof(fw_cmd)); |
3484 | if (ret_val != 0) | |
3485 | continue; | |
3486 | ||
3487 | if (fw_cmd.hdr.cmd_or_resp.ret_status == | |
3488 | FW_CEM_RESP_STATUS_SUCCESS) | |
3489 | ret_val = 0; | |
3490 | else | |
3491 | ret_val = IXGBE_ERR_HOST_INTERFACE_COMMAND; | |
3492 | ||
3493 | break; | |
3494 | } | |
3495 | ||
3496 | hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_SW_MNG_SM); | |
3497 | out: | |
3498 | return ret_val; | |
3499 | } | |
ff9d1a5a ET |
3500 | |
3501 | /** | |
3502 | * ixgbe_clear_tx_pending - Clear pending TX work from the PCIe fifo | |
3503 | * @hw: pointer to the hardware structure | |
3504 | * | |
3505 | * The 82599 and x540 MACs can experience issues if TX work is still pending | |
3506 | * when a reset occurs. This function prevents this by flushing the PCIe | |
3507 | * buffers on the system. | |
3508 | **/ | |
3509 | void ixgbe_clear_tx_pending(struct ixgbe_hw *hw) | |
3510 | { | |
3511 | u32 gcr_ext, hlreg0; | |
3512 | ||
3513 | /* | |
3514 | * If double reset is not requested then all transactions should | |
3515 | * already be clear and as such there is no work to do | |
3516 | */ | |
3517 | if (!(hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED)) | |
3518 | return; | |
3519 | ||
3520 | /* | |
3521 | * Set loopback enable to prevent any transmits from being sent | |
3522 | * should the link come up. This assumes that the RXCTRL.RXEN bit | |
3523 | * has already been cleared. | |
3524 | */ | |
3525 | hlreg0 = IXGBE_READ_REG(hw, IXGBE_HLREG0); | |
3526 | IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0 | IXGBE_HLREG0_LPBK); | |
3527 | ||
3528 | /* initiate cleaning flow for buffers in the PCIe transaction layer */ | |
3529 | gcr_ext = IXGBE_READ_REG(hw, IXGBE_GCR_EXT); | |
3530 | IXGBE_WRITE_REG(hw, IXGBE_GCR_EXT, | |
3531 | gcr_ext | IXGBE_GCR_EXT_BUFFERS_CLEAR); | |
3532 | ||
3533 | /* Flush all writes and allow 20usec for all transactions to clear */ | |
3534 | IXGBE_WRITE_FLUSH(hw); | |
3535 | udelay(20); | |
3536 | ||
3537 | /* restore previous register values */ | |
3538 | IXGBE_WRITE_REG(hw, IXGBE_GCR_EXT, gcr_ext); | |
3539 | IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0); | |
3540 | } | |
e1ea9158 DS |
3541 | |
3542 | static const u8 ixgbe_emc_temp_data[4] = { | |
3543 | IXGBE_EMC_INTERNAL_DATA, | |
3544 | IXGBE_EMC_DIODE1_DATA, | |
3545 | IXGBE_EMC_DIODE2_DATA, | |
3546 | IXGBE_EMC_DIODE3_DATA | |
3547 | }; | |
3548 | static const u8 ixgbe_emc_therm_limit[4] = { | |
3549 | IXGBE_EMC_INTERNAL_THERM_LIMIT, | |
3550 | IXGBE_EMC_DIODE1_THERM_LIMIT, | |
3551 | IXGBE_EMC_DIODE2_THERM_LIMIT, | |
3552 | IXGBE_EMC_DIODE3_THERM_LIMIT | |
3553 | }; | |
3554 | ||
3555 | /** | |
3556 | * ixgbe_get_ets_data - Extracts the ETS bit data | |
3557 | * @hw: pointer to hardware structure | |
3558 | * @ets_cfg: extected ETS data | |
3559 | * @ets_offset: offset of ETS data | |
3560 | * | |
3561 | * Returns error code. | |
3562 | **/ | |
3563 | static s32 ixgbe_get_ets_data(struct ixgbe_hw *hw, u16 *ets_cfg, | |
3564 | u16 *ets_offset) | |
3565 | { | |
3566 | s32 status = 0; | |
3567 | ||
3568 | status = hw->eeprom.ops.read(hw, IXGBE_ETS_CFG, ets_offset); | |
3569 | if (status) | |
3570 | goto out; | |
3571 | ||
3572 | if ((*ets_offset == 0x0000) || (*ets_offset == 0xFFFF)) { | |
3573 | status = IXGBE_NOT_IMPLEMENTED; | |
3574 | goto out; | |
3575 | } | |
3576 | ||
3577 | status = hw->eeprom.ops.read(hw, *ets_offset, ets_cfg); | |
3578 | if (status) | |
3579 | goto out; | |
3580 | ||
3581 | if ((*ets_cfg & IXGBE_ETS_TYPE_MASK) != IXGBE_ETS_TYPE_EMC_SHIFTED) { | |
3582 | status = IXGBE_NOT_IMPLEMENTED; | |
3583 | goto out; | |
3584 | } | |
3585 | ||
3586 | out: | |
3587 | return status; | |
3588 | } | |
3589 | ||
3590 | /** | |
3591 | * ixgbe_get_thermal_sensor_data - Gathers thermal sensor data | |
3592 | * @hw: pointer to hardware structure | |
3593 | * | |
3594 | * Returns the thermal sensor data structure | |
3595 | **/ | |
3596 | s32 ixgbe_get_thermal_sensor_data_generic(struct ixgbe_hw *hw) | |
3597 | { | |
3598 | s32 status = 0; | |
3599 | u16 ets_offset; | |
3600 | u16 ets_cfg; | |
3601 | u16 ets_sensor; | |
3602 | u8 num_sensors; | |
3603 | u8 i; | |
3604 | struct ixgbe_thermal_sensor_data *data = &hw->mac.thermal_sensor_data; | |
3605 | ||
3ca8bc6d DS |
3606 | /* Only support thermal sensors attached to physical port 0 */ |
3607 | if ((IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)) { | |
e1ea9158 DS |
3608 | status = IXGBE_NOT_IMPLEMENTED; |
3609 | goto out; | |
3610 | } | |
3611 | ||
3612 | status = ixgbe_get_ets_data(hw, &ets_cfg, &ets_offset); | |
3613 | if (status) | |
3614 | goto out; | |
3615 | ||
3616 | num_sensors = (ets_cfg & IXGBE_ETS_NUM_SENSORS_MASK); | |
3617 | if (num_sensors > IXGBE_MAX_SENSORS) | |
3618 | num_sensors = IXGBE_MAX_SENSORS; | |
3619 | ||
3620 | for (i = 0; i < num_sensors; i++) { | |
3621 | u8 sensor_index; | |
3622 | u8 sensor_location; | |
3623 | ||
3624 | status = hw->eeprom.ops.read(hw, (ets_offset + 1 + i), | |
3625 | &ets_sensor); | |
3626 | if (status) | |
3627 | goto out; | |
3628 | ||
3629 | sensor_index = ((ets_sensor & IXGBE_ETS_DATA_INDEX_MASK) >> | |
3630 | IXGBE_ETS_DATA_INDEX_SHIFT); | |
3631 | sensor_location = ((ets_sensor & IXGBE_ETS_DATA_LOC_MASK) >> | |
3632 | IXGBE_ETS_DATA_LOC_SHIFT); | |
3633 | ||
3634 | if (sensor_location != 0) { | |
3635 | status = hw->phy.ops.read_i2c_byte(hw, | |
3636 | ixgbe_emc_temp_data[sensor_index], | |
3637 | IXGBE_I2C_THERMAL_SENSOR_ADDR, | |
3638 | &data->sensor[i].temp); | |
3639 | if (status) | |
3640 | goto out; | |
3641 | } | |
3642 | } | |
3643 | out: | |
3644 | return status; | |
3645 | } | |
3646 | ||
3647 | /** | |
3648 | * ixgbe_init_thermal_sensor_thresh_generic - Inits thermal sensor thresholds | |
3649 | * @hw: pointer to hardware structure | |
3650 | * | |
3651 | * Inits the thermal sensor thresholds according to the NVM map | |
3652 | * and save off the threshold and location values into mac.thermal_sensor_data | |
3653 | **/ | |
3654 | s32 ixgbe_init_thermal_sensor_thresh_generic(struct ixgbe_hw *hw) | |
3655 | { | |
3656 | s32 status = 0; | |
3657 | u16 ets_offset; | |
3658 | u16 ets_cfg; | |
3659 | u16 ets_sensor; | |
3660 | u8 low_thresh_delta; | |
3661 | u8 num_sensors; | |
3662 | u8 therm_limit; | |
3663 | u8 i; | |
3664 | struct ixgbe_thermal_sensor_data *data = &hw->mac.thermal_sensor_data; | |
3665 | ||
3666 | memset(data, 0, sizeof(struct ixgbe_thermal_sensor_data)); | |
3667 | ||
3ca8bc6d DS |
3668 | /* Only support thermal sensors attached to physical port 0 */ |
3669 | if ((IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)) { | |
e1ea9158 DS |
3670 | status = IXGBE_NOT_IMPLEMENTED; |
3671 | goto out; | |
3672 | } | |
3673 | ||
3674 | status = ixgbe_get_ets_data(hw, &ets_cfg, &ets_offset); | |
3675 | if (status) | |
3676 | goto out; | |
3677 | ||
3678 | low_thresh_delta = ((ets_cfg & IXGBE_ETS_LTHRES_DELTA_MASK) >> | |
3679 | IXGBE_ETS_LTHRES_DELTA_SHIFT); | |
3680 | num_sensors = (ets_cfg & IXGBE_ETS_NUM_SENSORS_MASK); | |
3681 | if (num_sensors > IXGBE_MAX_SENSORS) | |
3682 | num_sensors = IXGBE_MAX_SENSORS; | |
3683 | ||
3684 | for (i = 0; i < num_sensors; i++) { | |
3685 | u8 sensor_index; | |
3686 | u8 sensor_location; | |
3687 | ||
3688 | hw->eeprom.ops.read(hw, (ets_offset + 1 + i), &ets_sensor); | |
3689 | sensor_index = ((ets_sensor & IXGBE_ETS_DATA_INDEX_MASK) >> | |
3690 | IXGBE_ETS_DATA_INDEX_SHIFT); | |
3691 | sensor_location = ((ets_sensor & IXGBE_ETS_DATA_LOC_MASK) >> | |
3692 | IXGBE_ETS_DATA_LOC_SHIFT); | |
3693 | therm_limit = ets_sensor & IXGBE_ETS_DATA_HTHRESH_MASK; | |
3694 | ||
3695 | hw->phy.ops.write_i2c_byte(hw, | |
3696 | ixgbe_emc_therm_limit[sensor_index], | |
3697 | IXGBE_I2C_THERMAL_SENSOR_ADDR, therm_limit); | |
3698 | ||
3699 | if (sensor_location == 0) | |
3700 | continue; | |
3701 | ||
3702 | data->sensor[i].location = sensor_location; | |
3703 | data->sensor[i].caution_thresh = therm_limit; | |
3704 | data->sensor[i].max_op_thresh = therm_limit - low_thresh_delta; | |
3705 | } | |
3706 | out: | |
3707 | return status; | |
3708 | } | |
3709 |