projects / deliverable / linux.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
tlan: Enable device at resume
[deliverable/linux.git] / drivers / net / ethernet / ti / tlan.c
CommitLineData
1da177e4
LT		 1/*******************************************************************************
2 *
3 * Linux ThunderLAN Driver
4 *
5 * tlan.c
6 * by James Banks
7 *
8 * (C) 1997-1998 Caldera, Inc.
9 * (C) 1998 James Banks
10 * (C) 1999-2001 Torben Mathiasen
11 * (C) 2002 Samuel Chessman
12 *
13 * This software may be used and distributed according to the terms
14 * of the GNU General Public License, incorporated herein by reference.
15 *
1da177e4
LT		 16 ** Useful (if not required) reading:
17 *
18 * Texas Instruments, ThunderLAN Programmer's Guide,
19 * TI Literature Number SPWU013A
20 * available in PDF format from www.ti.com
21 * Level One, LXT901 and LXT970 Data Sheets
22 * available in PDF format from www.level1.com
23 * National Semiconductor, DP83840A Data Sheet
24 * available in PDF format from www.national.com
25 * Microchip Technology, 24C01A/02A/04A Data Sheet
26 * available in PDF format from www.microchip.com
27 *
c659c38b 28 ******************************************************************************/
1da177e4 29
50624aab
JP		 30#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
31
a6b7a407 32#include <linux/hardirq.h>
1da177e4
LT		 33#include <linux/module.h>
34#include <linux/init.h>
a6b7a407 35#include <linux/interrupt.h>
1da177e4
LT		 36#include <linux/ioport.h>
37#include <linux/eisa.h>
38#include <linux/pci.h>
1e7f0bd8 39#include <linux/dma-mapping.h>
1da177e4
LT		 40#include <linux/netdevice.h>
41#include <linux/etherdevice.h>
42#include <linux/delay.h>
43#include <linux/spinlock.h>
44#include <linux/workqueue.h>
45#include <linux/mii.h>
46
47#include "tlan.h"
48
1da177e4
LT		 49
50/* For removing EISA devices */
c659c38b 51static struct net_device *tlan_eisa_devices;
1da177e4 52
c659c38b 53static int tlan_devices_installed;
1da177e4
LT		 54
55/* Set speed, duplex and aui settings */
56static int aui[MAX_TLAN_BOARDS];
57static int duplex[MAX_TLAN_BOARDS];
58static int speed[MAX_TLAN_BOARDS];
59static int boards_found;
15efa9bb
SH		 60module_param_array(aui, int, NULL, 0);
61module_param_array(duplex, int, NULL, 0);
62module_param_array(speed, int, NULL, 0);
63MODULE_PARM_DESC(aui, "ThunderLAN use AUI port(s) (0-1)");
c659c38b
SA		 64MODULE_PARM_DESC(duplex,
65 "ThunderLAN duplex setting(s) (0-default, 1-half, 2-full)");
50624aab 66MODULE_PARM_DESC(speed, "ThunderLAN port speed setting(s) (0,10,100)");
1da177e4
LT		 67
68MODULE_AUTHOR("Maintainer: Samuel Chessman <chessman@tux.org>");
69MODULE_DESCRIPTION("Driver for TI ThunderLAN based ethernet PCI adapters");
70MODULE_LICENSE("GPL");
71
1da177e4
LT		 72/* Turn on debugging. See Documentation/networking/tlan.txt for details */
73static int debug;
15efa9bb
SH		 74module_param(debug, int, 0);
75MODULE_PARM_DESC(debug, "ThunderLAN debug mask");
1da177e4 76
c659c38b 77static const char tlan_signature[] = "TLAN";
fa6d5d4f 78static const char tlan_banner[] = "ThunderLAN driver v1.17\n";
1da177e4
LT		 79static int tlan_have_pci;
80static int tlan_have_eisa;
81
c659c38b
SA		 82static const char * const media[] = {
83 "10BaseT-HD", "10BaseT-FD", "100baseTx-HD",
84 "100BaseTx-FD", "100BaseT4", NULL
1da177e4
LT		 85};
86
87static struct board {
c659c38b
SA		 88 const char *device_label;
89 u32 flags;
90 u16 addr_ofs;
1da177e4
LT		 91} board_info[] = {
92 { "Compaq Netelligent 10 T PCI UTP", TLAN_ADAPTER_ACTIVITY_LED, 0x83 },
c659c38b
SA		 93 { "Compaq Netelligent 10/100 TX PCI UTP",
94 TLAN_ADAPTER_ACTIVITY_LED, 0x83 },
1da177e4 95 { "Compaq Integrated NetFlex-3/P", TLAN_ADAPTER_NONE, 0x83 },
dfc2c0a6
SH		 96 { "Compaq NetFlex-3/P",
97 TLAN_ADAPTER_UNMANAGED_PHY | TLAN_ADAPTER_BIT_RATE_PHY, 0x83 },
1da177e4 98 { "Compaq NetFlex-3/P", TLAN_ADAPTER_NONE, 0x83 },
dfc2c0a6
SH		 99 { "Compaq Netelligent Integrated 10/100 TX UTP",
100 TLAN_ADAPTER_ACTIVITY_LED, 0x83 },
c659c38b
SA		 101 { "Compaq Netelligent Dual 10/100 TX PCI UTP",
102 TLAN_ADAPTER_NONE, 0x83 },
103 { "Compaq Netelligent 10/100 TX Embedded UTP",
104 TLAN_ADAPTER_NONE, 0x83 },
1da177e4 105 { "Olicom OC-2183/2185", TLAN_ADAPTER_USE_INTERN_10, 0x83 },
eb522bb4
OZ		 106 { "Olicom OC-2325", TLAN_ADAPTER_ACTIVITY_LED |
107 TLAN_ADAPTER_UNMANAGED_PHY, 0xf8 },
108 { "Olicom OC-2326", TLAN_ADAPTER_ACTIVITY_LED |
109 TLAN_ADAPTER_USE_INTERN_10, 0xf8 },
1da177e4 110 { "Compaq Netelligent 10/100 TX UTP", TLAN_ADAPTER_ACTIVITY_LED, 0x83 },
c659c38b 111 { "Compaq Netelligent 10 T/2 PCI UTP/coax", TLAN_ADAPTER_NONE, 0x83 },
dfc2c0a6 112 { "Compaq NetFlex-3/E",
c659c38b 113 TLAN_ADAPTER_ACTIVITY_LED | /* EISA card */
dfc2c0a6 114 TLAN_ADAPTER_UNMANAGED_PHY | TLAN_ADAPTER_BIT_RATE_PHY, 0x83 },
c659c38b
SA		 115 { "Compaq NetFlex-3/E",
116 TLAN_ADAPTER_ACTIVITY_LED, 0x83 }, /* EISA card */
1da177e4
LT		 117};
118
a3aa1884 119static DEFINE_PCI_DEVICE_TABLE(tlan_pci_tbl) = {
1da177e4 120 { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETEL10,
c659c38b 121 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
1da177e4 122 { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETEL100,
c659c38b 123 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 },
1da177e4 124 { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETFLEX3I,
c659c38b 125 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2 },
1da177e4 126 { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_THUNDER,
c659c38b 127 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3 },
1da177e4 128 { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETFLEX3B,
c659c38b 129 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 },
1da177e4 130 { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETEL100PI,
c659c38b 131 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5 },
1da177e4 132 { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETEL100D,
c659c38b 133 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 6 },
1da177e4 134 { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETEL100I,
c659c38b 135 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 7 },
1da177e4 136 { PCI_VENDOR_ID_OLICOM, PCI_DEVICE_ID_OLICOM_OC2183,
c659c38b 137 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 8 },
1da177e4 138 { PCI_VENDOR_ID_OLICOM, PCI_DEVICE_ID_OLICOM_OC2325,
c659c38b 139 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 9 },
1da177e4 140 { PCI_VENDOR_ID_OLICOM, PCI_DEVICE_ID_OLICOM_OC2326,
c659c38b 141 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 10 },
1da177e4 142 { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_NETELLIGENT_10_100_WS_5100,
c659c38b 143 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 11 },
1da177e4 144 { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_NETELLIGENT_10_T2,
c659c38b 145 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 12 },
1da177e4
LT		 146 { 0,}
147};
6aa20a22 148MODULE_DEVICE_TABLE(pci, tlan_pci_tbl);
1da177e4 149
c659c38b
SA		 150static void tlan_eisa_probe(void);
151static void tlan_eisa_cleanup(void);
152static int tlan_init(struct net_device *);
153static int tlan_open(struct net_device *dev);
154static netdev_tx_t tlan_start_tx(struct sk_buff *, struct net_device *);
155static irqreturn_t tlan_handle_interrupt(int, void *);
156static int tlan_close(struct net_device *);
157static struct net_device_stats *tlan_get_stats(struct net_device *);
158static void tlan_set_multicast_list(struct net_device *);
159static int tlan_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
160static int tlan_probe1(struct pci_dev *pdev, long ioaddr,
161 int irq, int rev, const struct pci_device_id *ent);
162static void tlan_tx_timeout(struct net_device *dev);
163static void tlan_tx_timeout_work(struct work_struct *work);
164static int tlan_init_one(struct pci_dev *pdev,
165 const struct pci_device_id *ent);
166
167static u32 tlan_handle_tx_eof(struct net_device *, u16);
168static u32 tlan_handle_stat_overflow(struct net_device *, u16);
169static u32 tlan_handle_rx_eof(struct net_device *, u16);
170static u32 tlan_handle_dummy(struct net_device *, u16);
171static u32 tlan_handle_tx_eoc(struct net_device *, u16);
172static u32 tlan_handle_status_check(struct net_device *, u16);
173static u32 tlan_handle_rx_eoc(struct net_device *, u16);
174
175static void tlan_timer(unsigned long);
176
177static void tlan_reset_lists(struct net_device *);
178static void tlan_free_lists(struct net_device *);
179static void tlan_print_dio(u16);
180static void tlan_print_list(struct tlan_list *, char *, int);
181static void tlan_read_and_clear_stats(struct net_device *, int);
182static void tlan_reset_adapter(struct net_device *);
183static void tlan_finish_reset(struct net_device *);
184static void tlan_set_mac(struct net_device *, int areg, char *mac);
185
186static void tlan_phy_print(struct net_device *);
187static void tlan_phy_detect(struct net_device *);
188static void tlan_phy_power_down(struct net_device *);
189static void tlan_phy_power_up(struct net_device *);
190static void tlan_phy_reset(struct net_device *);
191static void tlan_phy_start_link(struct net_device *);
192static void tlan_phy_finish_auto_neg(struct net_device *);
c0a87c22 193static void tlan_phy_monitor(unsigned long);
1da177e4
LT		 194
195/*
c659c38b
SA		 196 static int tlan_phy_nop(struct net_device *);
197 static int tlan_phy_internal_check(struct net_device *);
198 static int tlan_phy_internal_service(struct net_device *);
199 static int tlan_phy_dp83840a_check(struct net_device *);
1da177e4
LT		 200*/
201
c659c38b
SA		 202static bool tlan_mii_read_reg(struct net_device *, u16, u16, u16 *);
203static void tlan_mii_send_data(u16, u32, unsigned);
204static void tlan_mii_sync(u16);
205static void tlan_mii_write_reg(struct net_device *, u16, u16, u16);
1da177e4 206
c659c38b
SA		 207static void tlan_ee_send_start(u16);
208static int tlan_ee_send_byte(u16, u8, int);
209static void tlan_ee_receive_byte(u16, u8 *, int);
210static int tlan_ee_read_byte(struct net_device *, u8, u8 *);
1da177e4
LT		 211
212
93e16847 213static inline void
c659c38b 214tlan_store_skb(struct tlan_list *tag, struct sk_buff *skb)
1da177e4
LT		 215{
216 unsigned long addr = (unsigned long)skb;
93e16847
SH		 217 tag->buffer[9].address = addr;
218 tag->buffer[8].address = upper_32_bits(addr);
1da177e4
LT		 219}
220
93e16847 221static inline struct sk_buff *
c659c38b 222tlan_get_skb(const struct tlan_list *tag)
1da177e4 223{
93e16847
SH		 224 unsigned long addr;
225
0d63bea2 226 addr = tag->buffer[9].address;
da3a9e9e 227 addr |= ((unsigned long) tag->buffer[8].address << 16) << 16;
1da177e4
LT		 228 return (struct sk_buff *) addr;
229}
230
c659c38b
SA		 231static u32
232(*tlan_int_vector[TLAN_INT_NUMBER_OF_INTS])(struct net_device *, u16) = {
a3ccc789 233 NULL,
c659c38b
SA		 234 tlan_handle_tx_eof,
235 tlan_handle_stat_overflow,
236 tlan_handle_rx_eof,
237 tlan_handle_dummy,
238 tlan_handle_tx_eoc,
239 tlan_handle_status_check,
240 tlan_handle_rx_eoc
1da177e4
LT		 241};
242
243static inline void
c659c38b 244tlan_set_timer(struct net_device *dev, u32 ticks, u32 type)
1da177e4 245{
c659c38b 246 struct tlan_priv *priv = netdev_priv(dev);
1da177e4 247 unsigned long flags = 0;
6aa20a22 248
1da177e4
LT		 249 if (!in_irq())
250 spin_lock_irqsave(&priv->lock, flags);
c659c38b
SA		 251 if (priv->timer.function != NULL &&
252 priv->timer_type != TLAN_TIMER_ACTIVITY) {
1da177e4
LT		 253 if (!in_irq())
254 spin_unlock_irqrestore(&priv->lock, flags);
255 return;
256 }
c659c38b 257 priv->timer.function = tlan_timer;
1da177e4
LT		 258 if (!in_irq())
259 spin_unlock_irqrestore(&priv->lock, flags);
260
261 priv->timer.data = (unsigned long) dev;
c659c38b
SA		 262 priv->timer_set_at = jiffies;
263 priv->timer_type = type;
1da177e4 264 mod_timer(&priv->timer, jiffies + ticks);
6aa20a22 265
c659c38b 266}
1da177e4
LT		 267
268
269/*****************************************************************************
270******************************************************************************
271
c659c38b 272ThunderLAN driver primary functions
1da177e4 273
c659c38b 274these functions are more or less common to all linux network drivers.
1da177e4
LT		 275
276******************************************************************************
277*****************************************************************************/
278
279
280
281
282
c659c38b
SA		 283/***************************************************************
284 * tlan_remove_one
285 *
286 * Returns:
287 * Nothing
288 * Parms:
289 * None
290 *
291 * Goes through the TLanDevices list and frees the device
292 * structs and memory associated with each device (lists
293 * and buffers). It also ureserves the IO port regions
294 * associated with this device.
295 *
296 **************************************************************/
1da177e4
LT		 297
298
36915876 299static void tlan_remove_one(struct pci_dev *pdev)
1da177e4 300{
c659c38b
SA		 301 struct net_device *dev = pci_get_drvdata(pdev);
302 struct tlan_priv *priv = netdev_priv(dev);
6aa20a22 303
c659c38b 304 unregister_netdev(dev);
1da177e4 305
c659c38b
SA		 306 if (priv->dma_storage) {
307 pci_free_consistent(priv->pci_dev,
308 priv->dma_size, priv->dma_storage,
309 priv->dma_storage_dma);
1da177e4
LT		 310 }
311
312#ifdef CONFIG_PCI
313 pci_release_regions(pdev);
314#endif
6aa20a22 315
c659c38b 316 free_netdev(dev);
6aa20a22 317
1e0a8b13 318 cancel_work_sync(&priv->tlan_tqueue);
6aa20a22 319}
1da177e4 320
fa6d5d4f
SA		 321static void tlan_start(struct net_device *dev)
322{
323 tlan_reset_lists(dev);
324 /* NOTE: It might not be necessary to read the stats before a
325 reset if you don't care what the values are.
326 */
327 tlan_read_and_clear_stats(dev, TLAN_IGNORE);
328 tlan_reset_adapter(dev);
329 netif_wake_queue(dev);
330}
331
332static void tlan_stop(struct net_device *dev)
333{
334 struct tlan_priv *priv = netdev_priv(dev);
335
c0a87c22 336 del_timer_sync(&priv->media_timer);
fa6d5d4f
SA		 337 tlan_read_and_clear_stats(dev, TLAN_RECORD);
338 outl(TLAN_HC_AD_RST, dev->base_addr + TLAN_HOST_CMD);
339 /* Reset and power down phy */
340 tlan_reset_adapter(dev);
341 if (priv->timer.function != NULL) {
342 del_timer_sync(&priv->timer);
343 priv->timer.function = NULL;
344 }
345}
346
347#ifdef CONFIG_PM
348
349static int tlan_suspend(struct pci_dev *pdev, pm_message_t state)
350{
351 struct net_device *dev = pci_get_drvdata(pdev);
352
353 if (netif_running(dev))
354 tlan_stop(dev);
355
356 netif_device_detach(dev);
357 pci_save_state(pdev);
358 pci_disable_device(pdev);
359 pci_wake_from_d3(pdev, false);
360 pci_set_power_state(pdev, PCI_D3hot);
361
362 return 0;
363}
364
365static int tlan_resume(struct pci_dev *pdev)
366{
367 struct net_device *dev = pci_get_drvdata(pdev);
e697b16b 368 int rc = pci_enable_device(pdev);
fa6d5d4f 369
e697b16b
OZ		 370 if (rc)
371 return rc;
fa6d5d4f 372 pci_restore_state(pdev);
1ca01512 373 pci_enable_wake(pdev, PCI_D0, 0);
fa6d5d4f
SA		 374 netif_device_attach(dev);
375
376 if (netif_running(dev))
377 tlan_start(dev);
378
379 return 0;
380}
381
382#else /* CONFIG_PM */
383
384#define tlan_suspend NULL
385#define tlan_resume NULL
386
387#endif /* CONFIG_PM */
388
389
1da177e4
LT		 390static struct pci_driver tlan_driver = {
391 .name = "tlan",
392 .id_table = tlan_pci_tbl,
393 .probe = tlan_init_one,
36915876 394 .remove = tlan_remove_one,
fa6d5d4f
SA		 395 .suspend = tlan_suspend,
396 .resume = tlan_resume,
1da177e4
LT		 397};
398
399static int __init tlan_probe(void)
400{
6c04a515 401 int rc = -ENODEV;
6aa20a22 402
50624aab 403 pr_info("%s", tlan_banner);
6aa20a22 404
1da177e4 405 TLAN_DBG(TLAN_DEBUG_PROBE, "Starting PCI Probe....\n");
6aa20a22 406
1da177e4
LT		 407 /* Use new style PCI probing. Now the kernel will
408 do most of this for us */
6c04a515
LP		 409 rc = pci_register_driver(&tlan_driver);
410
411 if (rc != 0) {
50624aab 412 pr_err("Could not register pci driver\n");
6c04a515
LP		 413 goto err_out_pci_free;
414 }
1da177e4
LT		 415
416 TLAN_DBG(TLAN_DEBUG_PROBE, "Starting EISA Probe....\n");
c659c38b 417 tlan_eisa_probe();
6aa20a22 418
50624aab
JP		 419 pr_info("%d device%s installed, PCI: %d EISA: %d\n",
420 tlan_devices_installed, tlan_devices_installed == 1 ? "" : "s",
421 tlan_have_pci, tlan_have_eisa);
1da177e4 422
c659c38b 423 if (tlan_devices_installed == 0) {
6c04a515
LP		 424 rc = -ENODEV;
425 goto err_out_pci_unreg;
1da177e4
LT		 426 }
427 return 0;
6c04a515
LP		 428
429err_out_pci_unreg:
430 pci_unregister_driver(&tlan_driver);
431err_out_pci_free:
6c04a515 432 return rc;
1da177e4 433}
6aa20a22 434
1da177e4 435
36915876 436static int tlan_init_one(struct pci_dev *pdev,
c659c38b 437 const struct pci_device_id *ent)
1da177e4 438{
c659c38b 439 return tlan_probe1(pdev, -1, -1, 0, ent);
1da177e4
LT		 440}
441
442
443/*
c659c38b
SA		 444***************************************************************
445* tlan_probe1
446*
447* Returns:
448* 0 on success, error code on error
449* Parms:
450* none
451*
452* The name is lower case to fit in with all the rest of
453* the netcard_probe names. This function looks for
454* another TLan based adapter, setting it up with the
455* allocated device struct if one is found.
456* tlan_probe has been ported to the new net API and
457* now allocates its own device structure. This function
458* is also used by modules.
459*
460**************************************************************/
461
1dd06ae8
GKH		 462static int tlan_probe1(struct pci_dev *pdev, long ioaddr, int irq, int rev,
463 const struct pci_device_id *ent)
1da177e4
LT		 464{
465
466 struct net_device *dev;
c659c38b 467 struct tlan_priv *priv;
1da177e4
LT		 468 u16 device_id;
469 int reg, rc = -ENODEV;
470
ad9f6713 471#ifdef CONFIG_PCI
1da177e4
LT		 472 if (pdev) {
473 rc = pci_enable_device(pdev);
474 if (rc)
475 return rc;
476
c659c38b 477 rc = pci_request_regions(pdev, tlan_signature);
1da177e4 478 if (rc) {
50624aab 479 pr_err("Could not reserve IO regions\n");
1da177e4
LT		 480 goto err_out;
481 }
482 }
ad9f6713 483#endif /* CONFIG_PCI */
1da177e4 484
c659c38b 485 dev = alloc_etherdev(sizeof(struct tlan_priv));
1da177e4 486 if (dev == NULL) {
1da177e4
LT		 487 rc = -ENOMEM;
488 goto err_out_regions;
489 }
1da177e4 490 SET_NETDEV_DEV(dev, &pdev->dev);
6aa20a22 491
1da177e4
LT		 492 priv = netdev_priv(dev);
493
c659c38b 494 priv->pci_dev = pdev;
c4028958 495 priv->dev = dev;
6aa20a22 496
1da177e4
LT		 497 /* Is this a PCI device? */
498 if (pdev) {
c659c38b 499 u32 pci_io_base = 0;
1da177e4
LT		 500
501 priv->adapter = &board_info[ent->driver_data];
502
284901a9 503 rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
1da177e4 504 if (rc) {
50624aab 505 pr_err("No suitable PCI mapping available\n");
1da177e4
LT		 506 goto err_out_free_dev;
507 }
508
c659c38b 509 for (reg = 0; reg <= 5; reg++) {
1da177e4
LT		 510 if (pci_resource_flags(pdev, reg) & IORESOURCE_IO) {
511 pci_io_base = pci_resource_start(pdev, reg);
c659c38b
SA		 512 TLAN_DBG(TLAN_DEBUG_GNRL,
513 "IO mapping is available at %x.\n",
514 pci_io_base);
1da177e4
LT		 515 break;
516 }
517 }
518 if (!pci_io_base) {
50624aab 519 pr_err("No IO mappings available\n");
1da177e4
LT		 520 rc = -EIO;
521 goto err_out_free_dev;
522 }
6aa20a22 523
1da177e4
LT		 524 dev->base_addr = pci_io_base;
525 dev->irq = pdev->irq;
c659c38b 526 priv->adapter_rev = pdev->revision;
1da177e4
LT		 527 pci_set_master(pdev);
528 pci_set_drvdata(pdev, dev);
529
530 } else { /* EISA card */
531 /* This is a hack. We need to know which board structure
532 * is suited for this adapter */
533 device_id = inw(ioaddr + EISA_ID2);
1da177e4 534 if (device_id == 0x20F1) {
c659c38b
SA		 535 priv->adapter = &board_info[13]; /* NetFlex-3/E */
536 priv->adapter_rev = 23; /* TLAN 2.3 */
1da177e4
LT		 537 } else {
538 priv->adapter = &board_info[14];
c659c38b 539 priv->adapter_rev = 10; /* TLAN 1.0 */
1da177e4
LT		 540 }
541 dev->base_addr = ioaddr;
542 dev->irq = irq;
543 }
544
545 /* Kernel parameters */
546 if (dev->mem_start) {
547 priv->aui = dev->mem_start & 0x01;
dfc2c0a6
SH		 548 priv->duplex = ((dev->mem_start & 0x06) == 0x06) ? 0
549 : (dev->mem_start & 0x06) >> 1;
550 priv->speed = ((dev->mem_start & 0x18) == 0x18) ? 0
551 : (dev->mem_start & 0x18) >> 3;
6aa20a22 552
c659c38b 553 if (priv->speed == 0x1)
1da177e4 554 priv->speed = TLAN_SPEED_10;
c659c38b 555 else if (priv->speed == 0x2)
1da177e4 556 priv->speed = TLAN_SPEED_100;
c659c38b 557
1da177e4
LT		 558 debug = priv->debug = dev->mem_end;
559 } else {
560 priv->aui = aui[boards_found];
561 priv->speed = speed[boards_found];
562 priv->duplex = duplex[boards_found];
563 priv->debug = debug;
564 }
6aa20a22 565
1da177e4
LT		 566 /* This will be used when we get an adapter error from
567 * within our irq handler */
c659c38b 568 INIT_WORK(&priv->tlan_tqueue, tlan_tx_timeout_work);
1da177e4
LT		 569
570 spin_lock_init(&priv->lock);
6aa20a22 571
c659c38b 572 rc = tlan_init(dev);
1da177e4 573 if (rc) {
50624aab 574 pr_err("Could not set up device\n");
1da177e4
LT		 575 goto err_out_free_dev;
576 }
577
578 rc = register_netdev(dev);
579 if (rc) {
50624aab 580 pr_err("Could not register device\n");
1da177e4
LT		 581 goto err_out_uninit;
582 }
583
6aa20a22 584
c659c38b 585 tlan_devices_installed++;
1da177e4 586 boards_found++;
6aa20a22 587
1da177e4
LT		 588 /* pdev is NULL if this is an EISA device */
589 if (pdev)
590 tlan_have_pci++;
591 else {
c659c38b
SA		 592 priv->next_device = tlan_eisa_devices;
593 tlan_eisa_devices = dev;
1da177e4
LT		 594 tlan_have_eisa++;
595 }
6aa20a22 596
50624aab
JP		 597 netdev_info(dev, "irq=%2d, io=%04x, %s, Rev. %d\n",
598 (int)dev->irq,
599 (int)dev->base_addr,
600 priv->adapter->device_label,
601 priv->adapter_rev);
1da177e4
LT		 602 return 0;
603
604err_out_uninit:
c659c38b
SA		 605 pci_free_consistent(priv->pci_dev, priv->dma_size, priv->dma_storage,
606 priv->dma_storage_dma);
1da177e4
LT		 607err_out_free_dev:
608 free_netdev(dev);
609err_out_regions:
610#ifdef CONFIG_PCI
611 if (pdev)
612 pci_release_regions(pdev);
613#endif
614err_out:
615 if (pdev)
616 pci_disable_device(pdev);
617 return rc;
618}
619
620
c659c38b 621static void tlan_eisa_cleanup(void)
1da177e4
LT		 622{
623 struct net_device *dev;
c659c38b 624 struct tlan_priv *priv;
6aa20a22 625
c659c38b
SA		 626 while (tlan_have_eisa) {
627 dev = tlan_eisa_devices;
1da177e4 628 priv = netdev_priv(dev);
c659c38b
SA		 629 if (priv->dma_storage) {
630 pci_free_consistent(priv->pci_dev, priv->dma_size,
631 priv->dma_storage,
632 priv->dma_storage_dma);
1da177e4 633 }
c659c38b
SA		 634 release_region(dev->base_addr, 0x10);
635 unregister_netdev(dev);
636 tlan_eisa_devices = priv->next_device;
637 free_netdev(dev);
1da177e4
LT		 638 tlan_have_eisa--;
639 }
640}
6aa20a22
JG		 641
642
1da177e4
LT		 643static void __exit tlan_exit(void)
644{
645 pci_unregister_driver(&tlan_driver);
646
647 if (tlan_have_eisa)
c659c38b 648 tlan_eisa_cleanup();
1da177e4 649
1da177e4
LT		 650}
651
652
653/* Module loading/unloading */
654module_init(tlan_probe);
655module_exit(tlan_exit);
656
657
658
c659c38b
SA		 659/**************************************************************
660 * tlan_eisa_probe
661 *
662 * Returns: 0 on success, 1 otherwise
663 *
664 * Parms: None
665 *
666 *
667 * This functions probes for EISA devices and calls
668 * TLan_probe1 when one is found.
669 *
670 *************************************************************/
1da177e4 671
c659c38b 672static void __init tlan_eisa_probe(void)
1da177e4 673{
c659c38b
SA		 674 long ioaddr;
675 int rc = -ENODEV;
676 int irq;
1da177e4
LT		 677 u16 device_id;
678
6aa20a22 679 if (!EISA_bus) {
1da177e4
LT		 680 TLAN_DBG(TLAN_DEBUG_PROBE, "No EISA bus present\n");
681 return;
682 }
6aa20a22 683
1da177e4
LT		 684 /* Loop through all slots of the EISA bus */
685 for (ioaddr = 0x1000; ioaddr < 0x9000; ioaddr += 0x1000) {
6aa20a22 686
c659c38b
SA		 687 TLAN_DBG(TLAN_DEBUG_PROBE, "EISA_ID 0x%4x: 0x%4x\n",
688 (int) ioaddr + 0xc80, inw(ioaddr + EISA_ID));
689 TLAN_DBG(TLAN_DEBUG_PROBE, "EISA_ID 0x%4x: 0x%4x\n",
690 (int) ioaddr + 0xc82, inw(ioaddr + EISA_ID2));
1da177e4
LT		 691
692
c659c38b
SA		 693 TLAN_DBG(TLAN_DEBUG_PROBE,
694 "Probing for EISA adapter at IO: 0x%4x : ",
695 (int) ioaddr);
696 if (request_region(ioaddr, 0x10, tlan_signature) == NULL)
1da177e4
LT		 697 goto out;
698
6aa20a22 699 if (inw(ioaddr + EISA_ID) != 0x110E) {
1da177e4
LT		 700 release_region(ioaddr, 0x10);
701 goto out;
702 }
6aa20a22 703
1da177e4 704 device_id = inw(ioaddr + EISA_ID2);
6aa20a22 705 if (device_id != 0x20F1 && device_id != 0x40F1) {
c659c38b 706 release_region(ioaddr, 0x10);
1da177e4
LT		 707 goto out;
708 }
6aa20a22 709
c659c38b
SA		 710 /* check if adapter is enabled */
711 if (inb(ioaddr + EISA_CR) != 0x1) {
712 release_region(ioaddr, 0x10);
1da177e4
LT		 713 goto out2;
714 }
6aa20a22
JG		 715
716 if (debug == 0x10)
50624aab 717 pr_info("Found one\n");
1da177e4
LT		 718
719
720 /* Get irq from board */
c659c38b
SA		 721 switch (inb(ioaddr + 0xcc0)) {
722 case(0x10):
723 irq = 5;
724 break;
725 case(0x20):
726 irq = 9;
727 break;
728 case(0x40):
729 irq = 10;
730 break;
731 case(0x80):
732 irq = 11;
733 break;
734 default:
735 goto out;
6aa20a22
JG		 736 }
737
738
1da177e4 739 /* Setup the newly found eisa adapter */
c659c38b
SA		 740 rc = tlan_probe1(NULL, ioaddr, irq,
741 12, NULL);
1da177e4 742 continue;
6aa20a22 743
c659c38b
SA		 744out:
745 if (debug == 0x10)
50624aab 746 pr_info("None found\n");
c659c38b 747 continue;
1da177e4 748
c659c38b
SA		 749out2:
750 if (debug == 0x10)
50624aab 751 pr_info("Card found but it is not enabled, skipping\n");
c659c38b 752 continue;
6aa20a22 753
1da177e4
LT		 754 }
755
c659c38b 756}
1da177e4
LT		 757
758#ifdef CONFIG_NET_POLL_CONTROLLER
c659c38b 759static void tlan_poll(struct net_device *dev)
1da177e4
LT		 760{
761 disable_irq(dev->irq);
c659c38b 762 tlan_handle_interrupt(dev->irq, dev);
1da177e4
LT		 763 enable_irq(dev->irq);
764}
765#endif
766
c659c38b
SA		 767static const struct net_device_ops tlan_netdev_ops = {
768 .ndo_open = tlan_open,
769 .ndo_stop = tlan_close,
770 .ndo_start_xmit = tlan_start_tx,
771 .ndo_tx_timeout = tlan_tx_timeout,
772 .ndo_get_stats = tlan_get_stats,
afc4b13d 773 .ndo_set_rx_mode = tlan_set_multicast_list,
c659c38b 774 .ndo_do_ioctl = tlan_ioctl,
391c5e6e 775 .ndo_change_mtu = eth_change_mtu,
c659c38b 776 .ndo_set_mac_address = eth_mac_addr,
391c5e6e
SH		 777 .ndo_validate_addr = eth_validate_addr,
778#ifdef CONFIG_NET_POLL_CONTROLLER
c659c38b 779 .ndo_poll_controller = tlan_poll,
391c5e6e
SH		 780#endif
781};
6aa20a22 782
e36124d4
OZ		 783static void tlan_get_drvinfo(struct net_device *dev,
784 struct ethtool_drvinfo *info)
785{
786 struct tlan_priv *priv = netdev_priv(dev);
787
788 strlcpy(info->driver, KBUILD_MODNAME, sizeof(info->driver));
789 if (priv->pci_dev)
790 strlcpy(info->bus_info, pci_name(priv->pci_dev),
791 sizeof(info->bus_info));
792 else
793 strlcpy(info->bus_info, "EISA", sizeof(info->bus_info));
794 info->eedump_len = TLAN_EEPROM_SIZE;
795}
796
797static int tlan_get_eeprom_len(struct net_device *dev)
798{
799 return TLAN_EEPROM_SIZE;
800}
1da177e4 801
e36124d4
OZ		 802static int tlan_get_eeprom(struct net_device *dev,
803 struct ethtool_eeprom *eeprom, u8 *data)
804{
805 int i;
806
807 for (i = 0; i < TLAN_EEPROM_SIZE; i++)
808 if (tlan_ee_read_byte(dev, i, &data[i]))
809 return -EIO;
810
811 return 0;
812}
813
814static const struct ethtool_ops tlan_ethtool_ops = {
815 .get_drvinfo = tlan_get_drvinfo,
816 .get_link = ethtool_op_get_link,
817 .get_eeprom_len = tlan_get_eeprom_len,
818 .get_eeprom = tlan_get_eeprom,
819};
1da177e4 820
c659c38b
SA		 821/***************************************************************
822 * tlan_init
823 *
824 * Returns:
825 * 0 on success, error code otherwise.
826 * Parms:
827 * dev The structure of the device to be
828 * init'ed.
829 *
830 * This function completes the initialization of the
831 * device structure and driver. It reserves the IO
832 * addresses, allocates memory for the lists and bounce
833 * buffers, retrieves the MAC address from the eeprom
834 * and assignes the device's methods.
835 *
836 **************************************************************/
837
838static int tlan_init(struct net_device *dev)
1da177e4
LT		 839{
840 int dma_size;
c659c38b 841 int err;
1da177e4 842 int i;
c659c38b 843 struct tlan_priv *priv;
1da177e4
LT		 844
845 priv = netdev_priv(dev);
6aa20a22 846
c659c38b
SA		 847 dma_size = (TLAN_NUM_RX_LISTS + TLAN_NUM_TX_LISTS)
848 * (sizeof(struct tlan_list));
849 priv->dma_storage = pci_alloc_consistent(priv->pci_dev,
850 dma_size,
851 &priv->dma_storage_dma);
852 priv->dma_size = dma_size;
853
854 if (priv->dma_storage == NULL) {
50624aab 855 pr_err("Could not allocate lists and buffers for %s\n",
c659c38b 856 dev->name);
1da177e4
LT		 857 return -ENOMEM;
858 }
c659c38b
SA		 859 memset(priv->dma_storage, 0, dma_size);
860 priv->rx_list = (struct tlan_list *)
861 ALIGN((unsigned long)priv->dma_storage, 8);
862 priv->rx_list_dma = ALIGN(priv->dma_storage_dma, 8);
863 priv->tx_list = priv->rx_list + TLAN_NUM_RX_LISTS;
864 priv->tx_list_dma =
865 priv->rx_list_dma + sizeof(struct tlan_list)*TLAN_NUM_RX_LISTS;
93e16847 866
1da177e4 867 err = 0;
59be4ad6 868 for (i = 0; i < ETH_ALEN; i++)
c659c38b
SA		 869 err |= tlan_ee_read_byte(dev,
870 (u8) priv->adapter->addr_ofs + i,
871 (u8 *) &dev->dev_addr[i]);
872 if (err) {
50624aab
JP		 873 pr_err("%s: Error reading MAC from eeprom: %d\n",
874 dev->name, err);
1da177e4 875 }
59be4ad6
OZ		 876 /* Olicom OC-2325/OC-2326 have the address byte-swapped */
877 if (priv->adapter->addr_ofs == 0xf8) {
878 for (i = 0; i < ETH_ALEN; i += 2) {
879 char tmp = dev->dev_addr[i];
880 dev->dev_addr[i] = dev->dev_addr[i + 1];
881 dev->dev_addr[i + 1] = tmp;
882 }
883 }
1da177e4
LT		 884
885 netif_carrier_off(dev);
886
887 /* Device methods */
c659c38b 888 dev->netdev_ops = &tlan_netdev_ops;
e36124d4 889 dev->ethtool_ops = &tlan_ethtool_ops;
1da177e4
LT		 890 dev->watchdog_timeo = TX_TIMEOUT;
891
892 return 0;
893
c659c38b 894}
1da177e4
LT		 895
896
897
898
c659c38b
SA		 899/***************************************************************
900 * tlan_open
901 *
902 * Returns:
903 * 0 on success, error code otherwise.
904 * Parms:
905 * dev Structure of device to be opened.
906 *
907 * This routine puts the driver and TLAN adapter in a
908 * state where it is ready to send and receive packets.
909 * It allocates the IRQ, resets and brings the adapter
910 * out of reset, and allows interrupts. It also delays
911 * the startup for autonegotiation or sends a Rx GO
912 * command to the adapter, as appropriate.
913 *
914 **************************************************************/
1da177e4 915
c659c38b 916static int tlan_open(struct net_device *dev)
1da177e4 917{
c659c38b 918 struct tlan_priv *priv = netdev_priv(dev);
1da177e4 919 int err;
6aa20a22 920
c659c38b
SA		 921 priv->tlan_rev = tlan_dio_read8(dev->base_addr, TLAN_DEF_REVISION);
922 err = request_irq(dev->irq, tlan_handle_interrupt, IRQF_SHARED,
923 dev->name, dev);
6aa20a22 924
c659c38b 925 if (err) {
50624aab
JP		 926 netdev_err(dev, "Cannot open because IRQ %d is already in use\n",
927 dev->irq);
1da177e4
LT		 928 return err;
929 }
6aa20a22 930
1da177e4 931 init_timer(&priv->timer);
c0a87c22 932 init_timer(&priv->media_timer);
6aa20a22 933
fa6d5d4f 934 tlan_start(dev);
1da177e4 935
c659c38b
SA		 936 TLAN_DBG(TLAN_DEBUG_GNRL, "%s: Opened. TLAN Chip Rev: %x\n",
937 dev->name, priv->tlan_rev);
1da177e4
LT		 938
939 return 0;
940
c659c38b 941}
1da177e4
LT		 942
943
944
c659c38b
SA		 945/**************************************************************
946 * tlan_ioctl
947 *
948 * Returns:
949 * 0 on success, error code otherwise
950 * Params:
951 * dev structure of device to receive ioctl.
952 *
953 * rq ifreq structure to hold userspace data.
954 *
955 * cmd ioctl command.
956 *
957 *
958 *************************************************************/
1da177e4 959
c659c38b 960static int tlan_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
1da177e4 961{
c659c38b 962 struct tlan_priv *priv = netdev_priv(dev);
1da177e4 963 struct mii_ioctl_data *data = if_mii(rq);
c659c38b 964 u32 phy = priv->phy[priv->phy_num];
6aa20a22 965
c659c38b 966 if (!priv->phy_online)
1da177e4
LT		 967 return -EAGAIN;
968
c659c38b
SA		 969 switch (cmd) {
970 case SIOCGMIIPHY: /* get address of MII PHY in use. */
971 data->phy_id = phy;
1da177e4
LT		 972
973
c659c38b
SA		 974 case SIOCGMIIREG: /* read MII PHY register. */
975 tlan_mii_read_reg(dev, data->phy_id & 0x1f,
976 data->reg_num & 0x1f, &data->val_out);
977 return 0;
6aa20a22 978
1da177e4 979
c659c38b
SA		 980 case SIOCSMIIREG: /* write MII PHY register. */
981 tlan_mii_write_reg(dev, data->phy_id & 0x1f,
982 data->reg_num & 0x1f, data->val_in);
983 return 0;
984 default:
985 return -EOPNOTSUPP;
1da177e4 986 }
c659c38b 987}
1da177e4
LT		 988
989
c659c38b
SA		 990/***************************************************************
991 * tlan_tx_timeout
992 *
993 * Returns: nothing
994 *
995 * Params:
996 * dev structure of device which timed out
997 * during transmit.
998 *
999 **************************************************************/
1da177e4 1000
c659c38b 1001static void tlan_tx_timeout(struct net_device *dev)
1da177e4 1002{
6aa20a22 1003
c659c38b 1004 TLAN_DBG(TLAN_DEBUG_GNRL, "%s: Transmit timed out.\n", dev->name);
6aa20a22 1005
1da177e4 1006 /* Ok so we timed out, lets see what we can do about it...*/
c659c38b
SA		 1007 tlan_free_lists(dev);
1008 tlan_reset_lists(dev);
1009 tlan_read_and_clear_stats(dev, TLAN_IGNORE);
1010 tlan_reset_adapter(dev);
1ae5dc34 1011 dev->trans_start = jiffies; /* prevent tx timeout */
c659c38b 1012 netif_wake_queue(dev);
1da177e4
LT		 1013
1014}
6aa20a22 1015
1da177e4 1016
c659c38b
SA		 1017/***************************************************************
1018 * tlan_tx_timeout_work
1019 *
1020 * Returns: nothing
1021 *
1022 * Params:
1023 * work work item of device which timed out
1024 *
1025 **************************************************************/
c4028958 1026
c659c38b 1027static void tlan_tx_timeout_work(struct work_struct *work)
c4028958 1028{
c659c38b
SA		 1029 struct tlan_priv *priv =
1030 container_of(work, struct tlan_priv, tlan_tqueue);
c4028958 1031
c659c38b 1032 tlan_tx_timeout(priv->dev);
c4028958
DH		 1033}
1034
1035
1da177e4 1036
c659c38b
SA		 1037/***************************************************************
1038 * tlan_start_tx
1039 *
1040 * Returns:
1041 * 0 on success, non-zero on failure.
1042 * Parms:
1043 * skb A pointer to the sk_buff containing the
1044 * frame to be sent.
1045 * dev The device to send the data on.
1046 *
1047 * This function adds a frame to the Tx list to be sent
1048 * ASAP. First it verifies that the adapter is ready and
1049 * there is room in the queue. Then it sets up the next
1050 * available list, copies the frame to the corresponding
1051 * buffer. If the adapter Tx channel is idle, it gives
1052 * the adapter a Tx Go command on the list, otherwise it
1053 * sets the forward address of the previous list to point
1054 * to this one. Then it frees the sk_buff.
1055 *
1056 **************************************************************/
1057
1058static netdev_tx_t tlan_start_tx(struct sk_buff *skb, struct net_device *dev)
1da177e4 1059{
c659c38b 1060 struct tlan_priv *priv = netdev_priv(dev);
1da177e4 1061 dma_addr_t tail_list_phys;
c659c38b 1062 struct tlan_list *tail_list;
1da177e4 1063 unsigned long flags;
8953f128 1064 unsigned int txlen;
1da177e4 1065
c659c38b
SA		 1066 if (!priv->phy_online) {
1067 TLAN_DBG(TLAN_DEBUG_TX, "TRANSMIT: %s PHY is not ready\n",
1068 dev->name);
1da177e4 1069 dev_kfree_skb_any(skb);
6ed10654 1070 return NETDEV_TX_OK;
1da177e4
LT		 1071 }
1072
41873e9a 1073 if (skb_padto(skb, TLAN_MIN_FRAME_SIZE))
6ed10654 1074 return NETDEV_TX_OK;
8953f128 1075 txlen = max(skb->len, (unsigned int)TLAN_MIN_FRAME_SIZE);
41873e9a 1076
c659c38b
SA		 1077 tail_list = priv->tx_list + priv->tx_tail;
1078 tail_list_phys =
1079 priv->tx_list_dma + sizeof(struct tlan_list)*priv->tx_tail;
6aa20a22 1080
c659c38b
SA		 1081 if (tail_list->c_stat != TLAN_CSTAT_UNUSED) {
1082 TLAN_DBG(TLAN_DEBUG_TX,
1083 "TRANSMIT: %s is busy (Head=%d Tail=%d)\n",
1084 dev->name, priv->tx_head, priv->tx_tail);
1da177e4 1085 netif_stop_queue(dev);
c659c38b 1086 priv->tx_busy_count++;
5b548140 1087 return NETDEV_TX_BUSY;
1da177e4
LT		 1088 }
1089
1090 tail_list->forward = 0;
1091
c659c38b 1092 tail_list->buffer[0].address = pci_map_single(priv->pci_dev,
5eeabf51
SA		 1093 skb->data, txlen,
1094 PCI_DMA_TODEVICE);
c659c38b 1095 tlan_store_skb(tail_list, skb);
1da177e4 1096
c659c38b 1097 tail_list->frame_size = (u16) txlen;
8953f128 1098 tail_list->buffer[0].count = TLAN_LAST_BUFFER | (u32) txlen;
41873e9a
SH		 1099 tail_list->buffer[1].count = 0;
1100 tail_list->buffer[1].address = 0;
1da177e4
LT		 1101
1102 spin_lock_irqsave(&priv->lock, flags);
c659c38b
SA		 1103 tail_list->c_stat = TLAN_CSTAT_READY;
1104 if (!priv->tx_in_progress) {
1105 priv->tx_in_progress = 1;
1106 TLAN_DBG(TLAN_DEBUG_TX,
1107 "TRANSMIT: Starting TX on buffer %d\n",
1108 priv->tx_tail);
1109 outl(tail_list_phys, dev->base_addr + TLAN_CH_PARM);
1110 outl(TLAN_HC_GO, dev->base_addr + TLAN_HOST_CMD);
1da177e4 1111 } else {
c659c38b
SA		 1112 TLAN_DBG(TLAN_DEBUG_TX,
1113 "TRANSMIT: Adding buffer %d to TX channel\n",
1114 priv->tx_tail);
1115 if (priv->tx_tail == 0) {
1116 (priv->tx_list + (TLAN_NUM_TX_LISTS - 1))->forward
dfc2c0a6 1117 = tail_list_phys;
1da177e4 1118 } else {
c659c38b 1119 (priv->tx_list + (priv->tx_tail - 1))->forward
dfc2c0a6 1120 = tail_list_phys;
1da177e4
LT		 1121 }
1122 }
1123 spin_unlock_irqrestore(&priv->lock, flags);
1124
c659c38b 1125 CIRC_INC(priv->tx_tail, TLAN_NUM_TX_LISTS);
1da177e4 1126
6ed10654 1127 return NETDEV_TX_OK;
1da177e4 1128
c659c38b 1129}
1da177e4
LT		 1130
1131
1132
1133
c659c38b
SA		 1134/***************************************************************
1135 * tlan_handle_interrupt
1136 *
1137 * Returns:
1138 * Nothing
1139 * Parms:
1140 * irq The line on which the interrupt
1141 * occurred.
1142 * dev_id A pointer to the device assigned to
1143 * this irq line.
1144 *
1145 * This function handles an interrupt generated by its
1146 * assigned TLAN adapter. The function deactivates
1147 * interrupts on its adapter, records the type of
1148 * interrupt, executes the appropriate subhandler, and
1149 * acknowdges the interrupt to the adapter (thus
1150 * re-enabling adapter interrupts.
1151 *
1152 **************************************************************/
1da177e4 1153
c659c38b 1154static irqreturn_t tlan_handle_interrupt(int irq, void *dev_id)
1da177e4 1155{
a3ccc789 1156 struct net_device *dev = dev_id;
c659c38b 1157 struct tlan_priv *priv = netdev_priv(dev);
1da177e4 1158 u16 host_int;
a3ccc789 1159 u16 type;
1da177e4
LT		 1160
1161 spin_lock(&priv->lock);
1162
c659c38b
SA		 1163 host_int = inw(dev->base_addr + TLAN_HOST_INT);
1164 type = (host_int & TLAN_HI_IT_MASK) >> 2;
1165 if (type) {
a3ccc789
SH		 1166 u32 ack;
1167 u32 host_cmd;
1da177e4 1168
c659c38b
SA		 1169 outw(host_int, dev->base_addr + TLAN_HOST_INT);
1170 ack = tlan_int_vector[type](dev, host_int);
1da177e4 1171
c659c38b
SA		 1172 if (ack) {
1173 host_cmd = TLAN_HC_ACK | ack | (type << 18);
1174 outl(host_cmd, dev->base_addr + TLAN_HOST_CMD);
a3ccc789 1175 }
1da177e4
LT		 1176 }
1177
1178 spin_unlock(&priv->lock);
1179
a3ccc789 1180 return IRQ_RETVAL(type);
c659c38b 1181}
1da177e4
LT		 1182
1183
1184
1185
c659c38b
SA		 1186/***************************************************************
1187 * tlan_close
1188 *
1189 * Returns:
1190 * An error code.
1191 * Parms:
1192 * dev The device structure of the device to
1193 * close.
1194 *
1195 * This function shuts down the adapter. It records any
1196 * stats, puts the adapter into reset state, deactivates
1197 * its time as needed, and frees the irq it is using.
1198 *
1199 **************************************************************/
1da177e4 1200
c659c38b 1201static int tlan_close(struct net_device *dev)
1da177e4 1202{
fa6d5d4f 1203 tlan_stop(dev);
6aa20a22 1204
c659c38b
SA		 1205 free_irq(dev->irq, dev);
1206 tlan_free_lists(dev);
1207 TLAN_DBG(TLAN_DEBUG_GNRL, "Device %s closed.\n", dev->name);
1da177e4
LT		 1208
1209 return 0;
1210
c659c38b 1211}
1da177e4
LT		 1212
1213
1214
1215
c659c38b
SA		 1216/***************************************************************
1217 * tlan_get_stats
1218 *
1219 * Returns:
1220 * A pointer to the device's statistics structure.
1221 * Parms:
1222 * dev The device structure to return the
1223 * stats for.
1224 *
1225 * This function updates the devices statistics by reading
1226 * the TLAN chip's onboard registers. Then it returns the
1227 * address of the statistics structure.
1228 *
1229 **************************************************************/
1da177e4 1230
c659c38b 1231static struct net_device_stats *tlan_get_stats(struct net_device *dev)
1da177e4 1232{
c659c38b 1233 struct tlan_priv *priv = netdev_priv(dev);
1da177e4
LT		 1234 int i;
1235
1236 /* Should only read stats if open ? */
c659c38b 1237 tlan_read_and_clear_stats(dev, TLAN_RECORD);
1da177e4 1238
c659c38b
SA		 1239 TLAN_DBG(TLAN_DEBUG_RX, "RECEIVE: %s EOC count = %d\n", dev->name,
1240 priv->rx_eoc_count);
1241 TLAN_DBG(TLAN_DEBUG_TX, "TRANSMIT: %s Busy count = %d\n", dev->name,
1242 priv->tx_busy_count);
1243 if (debug & TLAN_DEBUG_GNRL) {
1244 tlan_print_dio(dev->base_addr);
1245 tlan_phy_print(dev);
1da177e4 1246 }
c659c38b
SA		 1247 if (debug & TLAN_DEBUG_LIST) {
1248 for (i = 0; i < TLAN_NUM_RX_LISTS; i++)
1249 tlan_print_list(priv->rx_list + i, "RX", i);
1250 for (i = 0; i < TLAN_NUM_TX_LISTS; i++)
1251 tlan_print_list(priv->tx_list + i, "TX", i);
1da177e4 1252 }
6aa20a22 1253
f8f31544 1254 return &dev->stats;
1da177e4 1255
c659c38b 1256}
1da177e4
LT		 1257
1258
1259
1260
c659c38b
SA		 1261/***************************************************************
1262 * tlan_set_multicast_list
1263 *
1264 * Returns:
1265 * Nothing
1266 * Parms:
1267 * dev The device structure to set the
1268 * multicast list for.
1269 *
1270 * This function sets the TLAN adaptor to various receive
1271 * modes. If the IFF_PROMISC flag is set, promiscuous
1272 * mode is acitviated. Otherwise, promiscuous mode is
1273 * turned off. If the IFF_ALLMULTI flag is set, then
1274 * the hash table is set to receive all group addresses.
1275 * Otherwise, the first three multicast addresses are
1276 * stored in AREG_1-3, and the rest are selected via the
1277 * hash table, as necessary.
1278 *
1279 **************************************************************/
1da177e4 1280
c659c38b 1281static void tlan_set_multicast_list(struct net_device *dev)
6aa20a22 1282{
22bedad3 1283 struct netdev_hw_addr *ha;
1da177e4
LT		 1284 u32 hash1 = 0;
1285 u32 hash2 = 0;
1286 int i;
1287 u32 offset;
1288 u8 tmp;
1289
c659c38b
SA		 1290 if (dev->flags & IFF_PROMISC) {
1291 tmp = tlan_dio_read8(dev->base_addr, TLAN_NET_CMD);
1292 tlan_dio_write8(dev->base_addr,
1293 TLAN_NET_CMD, tmp | TLAN_NET_CMD_CAF);
1da177e4 1294 } else {
c659c38b
SA		 1295 tmp = tlan_dio_read8(dev->base_addr, TLAN_NET_CMD);
1296 tlan_dio_write8(dev->base_addr,
1297 TLAN_NET_CMD, tmp & ~TLAN_NET_CMD_CAF);
1298 if (dev->flags & IFF_ALLMULTI) {
1299 for (i = 0; i < 3; i++)
1300 tlan_set_mac(dev, i + 1, NULL);
1301 tlan_dio_write32(dev->base_addr, TLAN_HASH_1,
1302 0xffffffff);
1303 tlan_dio_write32(dev->base_addr, TLAN_HASH_2,
1304 0xffffffff);
1da177e4 1305 } else {
567ec874 1306 i = 0;
22bedad3 1307 netdev_for_each_mc_addr(ha, dev) {
c659c38b
SA		 1308 if (i < 3) {
1309 tlan_set_mac(dev, i + 1,
22bedad3 1310 (char *) &ha->addr);
1da177e4 1311 } else {
c659c38b
SA		 1312 offset =
1313 tlan_hash_func((u8 *)&ha->addr);
1314 if (offset < 32)
1315 hash1 |= (1 << offset);
1da177e4 1316 else
c659c38b 1317 hash2 |= (1 << (offset - 32));
1da177e4 1318 }
567ec874 1319 i++;
1da177e4 1320 }
c659c38b
SA		 1321 for ( ; i < 3; i++)
1322 tlan_set_mac(dev, i + 1, NULL);
1323 tlan_dio_write32(dev->base_addr, TLAN_HASH_1, hash1);
1324 tlan_dio_write32(dev->base_addr, TLAN_HASH_2, hash2);
1da177e4
LT		 1325 }
1326 }
1327
c659c38b 1328}
1da177e4
LT		 1329
1330
1331
1332/*****************************************************************************
1333******************************************************************************
1334
c659c38b 1335ThunderLAN driver interrupt vectors and table
1da177e4 1336
c659c38b
SA		 1337please see chap. 4, "Interrupt Handling" of the "ThunderLAN
1338Programmer's Guide" for more informations on handling interrupts
1339generated by TLAN based adapters.
1da177e4
LT		 1340
1341******************************************************************************
1342*****************************************************************************/
1343
1344
1da177e4
LT		 1345
1346
c659c38b
SA		 1347/***************************************************************
1348 * tlan_handle_tx_eof
1349 *
1350 * Returns:
1351 * 1
1352 * Parms:
1353 * dev Device assigned the IRQ that was
1354 * raised.
1355 * host_int The contents of the HOST_INT
1356 * port.
1357 *
1358 * This function handles Tx EOF interrupts which are raised
1359 * by the adapter when it has completed sending the
1360 * contents of a buffer. If detemines which list/buffer
1361 * was completed and resets it. If the buffer was the last
1362 * in the channel (EOC), then the function checks to see if
1363 * another buffer is ready to send, and if so, sends a Tx
1364 * Go command. Finally, the driver activates/continues the
1365 * activity LED.
1366 *
1367 **************************************************************/
1368
1369static u32 tlan_handle_tx_eof(struct net_device *dev, u16 host_int)
1da177e4 1370{
c659c38b 1371 struct tlan_priv *priv = netdev_priv(dev);
1da177e4 1372 int eoc = 0;
c659c38b 1373 struct tlan_list *head_list;
1da177e4
LT		 1374 dma_addr_t head_list_phys;
1375 u32 ack = 0;
c659c38b 1376 u16 tmp_c_stat;
6aa20a22 1377
c659c38b
SA		 1378 TLAN_DBG(TLAN_DEBUG_TX,
1379 "TRANSMIT: Handling TX EOF (Head=%d Tail=%d)\n",
1380 priv->tx_head, priv->tx_tail);
1381 head_list = priv->tx_list + priv->tx_head;
1da177e4 1382
c659c38b
SA		 1383 while (((tmp_c_stat = head_list->c_stat) & TLAN_CSTAT_FRM_CMP)
1384 && (ack < 255)) {
1385 struct sk_buff *skb = tlan_get_skb(head_list);
5eeabf51 1386
1da177e4 1387 ack++;
c659c38b 1388 pci_unmap_single(priv->pci_dev, head_list->buffer[0].address,
5eeabf51
SA		 1389 max(skb->len,
1390 (unsigned int)TLAN_MIN_FRAME_SIZE),
1391 PCI_DMA_TODEVICE);
1392 dev_kfree_skb_any(skb);
1393 head_list->buffer[8].address = 0;
1394 head_list->buffer[9].address = 0;
6aa20a22 1395
c659c38b 1396 if (tmp_c_stat & TLAN_CSTAT_EOC)
1da177e4 1397 eoc = 1;
6aa20a22 1398
c659c38b 1399 dev->stats.tx_bytes += head_list->frame_size;
1da177e4 1400
c659c38b 1401 head_list->c_stat = TLAN_CSTAT_UNUSED;
6aa20a22 1402 netif_start_queue(dev);
c659c38b
SA		 1403 CIRC_INC(priv->tx_head, TLAN_NUM_TX_LISTS);
1404 head_list = priv->tx_list + priv->tx_head;
1da177e4
LT		 1405 }
1406
1407 if (!ack)
50624aab
JP		 1408 netdev_info(dev,
1409 "Received interrupt for uncompleted TX frame\n");
c659c38b
SA		 1410
1411 if (eoc) {
1412 TLAN_DBG(TLAN_DEBUG_TX,
1413 "TRANSMIT: handling TX EOC (Head=%d Tail=%d)\n",
1414 priv->tx_head, priv->tx_tail);
1415 head_list = priv->tx_list + priv->tx_head;
1416 head_list_phys = priv->tx_list_dma
1417 + sizeof(struct tlan_list)*priv->tx_head;
f45437ef
SA		 1418 if ((head_list->c_stat & TLAN_CSTAT_READY)
1419 == TLAN_CSTAT_READY) {
c659c38b 1420 outl(head_list_phys, dev->base_addr + TLAN_CH_PARM);
1da177e4
LT		 1421 ack |= TLAN_HC_GO;
1422 } else {
c659c38b 1423 priv->tx_in_progress = 0;
1da177e4
LT		 1424 }
1425 }
6aa20a22 1426
c659c38b
SA		 1427 if (priv->adapter->flags & TLAN_ADAPTER_ACTIVITY_LED) {
1428 tlan_dio_write8(dev->base_addr,
1429 TLAN_LED_REG, TLAN_LED_LINK | TLAN_LED_ACT);
1430 if (priv->timer.function == NULL) {
1431 priv->timer.function = tlan_timer;
1432 priv->timer.data = (unsigned long) dev;
1433 priv->timer.expires = jiffies + TLAN_TIMER_ACT_DELAY;
1434 priv->timer_set_at = jiffies;
1435 priv->timer_type = TLAN_TIMER_ACTIVITY;
1436 add_timer(&priv->timer);
1437 } else if (priv->timer_type == TLAN_TIMER_ACTIVITY) {
1438 priv->timer_set_at = jiffies;
1da177e4
LT		 1439 }
1440 }
1441
1442 return ack;
1443
c659c38b 1444}
1da177e4
LT		 1445
1446
1447
1448
c659c38b
SA		 1449/***************************************************************
1450 * TLan_HandleStatOverflow
1451 *
1452 * Returns:
1453 * 1
1454 * Parms:
1455 * dev Device assigned the IRQ that was
1456 * raised.
1457 * host_int The contents of the HOST_INT
1458 * port.
1459 *
1460 * This function handles the Statistics Overflow interrupt
1461 * which means that one or more of the TLAN statistics
1462 * registers has reached 1/2 capacity and needs to be read.
1463 *
1464 **************************************************************/
1da177e4 1465
c659c38b 1466static u32 tlan_handle_stat_overflow(struct net_device *dev, u16 host_int)
1da177e4 1467{
c659c38b 1468 tlan_read_and_clear_stats(dev, TLAN_RECORD);
1da177e4
LT		 1469
1470 return 1;
1471
c659c38b
SA		 1472}
1473
1474
1475
1476
1477/***************************************************************
1478 * TLan_HandleRxEOF
1479 *
1480 * Returns:
1481 * 1
1482 * Parms:
1483 * dev Device assigned the IRQ that was
1484 * raised.
1485 * host_int The contents of the HOST_INT
1486 * port.
1487 *
1488 * This function handles the Rx EOF interrupt which
1489 * indicates a frame has been received by the adapter from
1490 * the net and the frame has been transferred to memory.
1491 * The function determines the bounce buffer the frame has
1492 * been loaded into, creates a new sk_buff big enough to
1493 * hold the frame, and sends it to protocol stack. It
1494 * then resets the used buffer and appends it to the end
1495 * of the list. If the frame was the last in the Rx
1496 * channel (EOC), the function restarts the receive channel
1497 * by sending an Rx Go command to the adapter. Then it
1498 * activates/continues the activity LED.
1499 *
1500 **************************************************************/
1501
1502static u32 tlan_handle_rx_eof(struct net_device *dev, u16 host_int)
1da177e4 1503{
c659c38b 1504 struct tlan_priv *priv = netdev_priv(dev);
1da177e4
LT		 1505 u32 ack = 0;
1506 int eoc = 0;
c659c38b 1507 struct tlan_list *head_list;
1da177e4 1508 struct sk_buff *skb;
c659c38b
SA		 1509 struct tlan_list *tail_list;
1510 u16 tmp_c_stat;
1da177e4
LT		 1511 dma_addr_t head_list_phys;
1512
c659c38b
SA		 1513 TLAN_DBG(TLAN_DEBUG_RX, "RECEIVE: handling RX EOF (Head=%d Tail=%d)\n",
1514 priv->rx_head, priv->rx_tail);
1515 head_list = priv->rx_list + priv->rx_head;
1516 head_list_phys =
1517 priv->rx_list_dma + sizeof(struct tlan_list)*priv->rx_head;
6aa20a22 1518
c659c38b
SA		 1519 while (((tmp_c_stat = head_list->c_stat) & TLAN_CSTAT_FRM_CMP)
1520 && (ack < 255)) {
1521 dma_addr_t frame_dma = head_list->buffer[0].address;
1522 u32 frame_size = head_list->frame_size;
5eeabf51
SA		 1523 struct sk_buff *new_skb;
1524
1da177e4 1525 ack++;
c659c38b 1526 if (tmp_c_stat & TLAN_CSTAT_EOC)
1da177e4 1527 eoc = 1;
6aa20a22 1528
89d71a66
ED		 1529 new_skb = netdev_alloc_skb_ip_align(dev,
1530 TLAN_MAX_FRAME_SIZE + 5);
c659c38b 1531 if (!new_skb)
5eeabf51 1532 goto drop_and_reuse;
6aa20a22 1533
c659c38b
SA		 1534 skb = tlan_get_skb(head_list);
1535 pci_unmap_single(priv->pci_dev, frame_dma,
5eeabf51 1536 TLAN_MAX_FRAME_SIZE, PCI_DMA_FROMDEVICE);
c659c38b 1537 skb_put(skb, frame_size);
1da177e4 1538
c659c38b 1539 dev->stats.rx_bytes += frame_size;
1da177e4 1540
c659c38b
SA		 1541 skb->protocol = eth_type_trans(skb, dev);
1542 netif_rx(skb);
6aa20a22 1543
c659c38b
SA		 1544 head_list->buffer[0].address =
1545 pci_map_single(priv->pci_dev, new_skb->data,
1546 TLAN_MAX_FRAME_SIZE, PCI_DMA_FROMDEVICE);
93e16847 1547
c659c38b 1548 tlan_store_skb(head_list, new_skb);
dfc2c0a6 1549drop_and_reuse:
1da177e4 1550 head_list->forward = 0;
c659c38b
SA		 1551 head_list->c_stat = 0;
1552 tail_list = priv->rx_list + priv->rx_tail;
1da177e4
LT		 1553 tail_list->forward = head_list_phys;
1554
c659c38b
SA		 1555 CIRC_INC(priv->rx_head, TLAN_NUM_RX_LISTS);
1556 CIRC_INC(priv->rx_tail, TLAN_NUM_RX_LISTS);
1557 head_list = priv->rx_list + priv->rx_head;
1558 head_list_phys = priv->rx_list_dma
1559 + sizeof(struct tlan_list)*priv->rx_head;
1da177e4
LT		 1560 }
1561
1562 if (!ack)
50624aab
JP		 1563 netdev_info(dev,
1564 "Received interrupt for uncompleted RX frame\n");
c659c38b
SA		 1565
1566
1567 if (eoc) {
1568 TLAN_DBG(TLAN_DEBUG_RX,
1569 "RECEIVE: handling RX EOC (Head=%d Tail=%d)\n",
1570 priv->rx_head, priv->rx_tail);
1571 head_list = priv->rx_list + priv->rx_head;
1572 head_list_phys = priv->rx_list_dma
1573 + sizeof(struct tlan_list)*priv->rx_head;
1574 outl(head_list_phys, dev->base_addr + TLAN_CH_PARM);
1da177e4 1575 ack |= TLAN_HC_GO | TLAN_HC_RT;
c659c38b 1576 priv->rx_eoc_count++;
1da177e4
LT		 1577 }
1578
c659c38b
SA		 1579 if (priv->adapter->flags & TLAN_ADAPTER_ACTIVITY_LED) {
1580 tlan_dio_write8(dev->base_addr,
1581 TLAN_LED_REG, TLAN_LED_LINK | TLAN_LED_ACT);
1582 if (priv->timer.function == NULL) {
1583 priv->timer.function = tlan_timer;
1da177e4
LT		 1584 priv->timer.data = (unsigned long) dev;
1585 priv->timer.expires = jiffies + TLAN_TIMER_ACT_DELAY;
c659c38b
SA		 1586 priv->timer_set_at = jiffies;
1587 priv->timer_type = TLAN_TIMER_ACTIVITY;
1da177e4 1588 add_timer(&priv->timer);
c659c38b
SA		 1589 } else if (priv->timer_type == TLAN_TIMER_ACTIVITY) {
1590 priv->timer_set_at = jiffies;
1da177e4
LT		 1591 }
1592 }
1593
1da177e4
LT		 1594 return ack;
1595
c659c38b 1596}
1da177e4
LT		 1597
1598
1599
1600
c659c38b
SA		 1601/***************************************************************
1602 * tlan_handle_dummy
1603 *
1604 * Returns:
1605 * 1
1606 * Parms:
1607 * dev Device assigned the IRQ that was
1608 * raised.
1609 * host_int The contents of the HOST_INT
1610 * port.
1611 *
1612 * This function handles the Dummy interrupt, which is
1613 * raised whenever a test interrupt is generated by setting
1614 * the Req_Int bit of HOST_CMD to 1.
1615 *
1616 **************************************************************/
1da177e4 1617
c659c38b 1618static u32 tlan_handle_dummy(struct net_device *dev, u16 host_int)
1da177e4 1619{
50624aab 1620 netdev_info(dev, "Test interrupt\n");
1da177e4
LT		 1621 return 1;
1622
c659c38b 1623}
1da177e4
LT		 1624
1625
1626
1627
c659c38b
SA		 1628/***************************************************************
1629 * tlan_handle_tx_eoc
1630 *
1631 * Returns:
1632 * 1
1633 * Parms:
1634 * dev Device assigned the IRQ that was
1635 * raised.
1636 * host_int The contents of the HOST_INT
1637 * port.
1638 *
1639 * This driver is structured to determine EOC occurrences by
1640 * reading the CSTAT member of the list structure. Tx EOC
1641 * interrupts are disabled via the DIO INTDIS register.
1642 * However, TLAN chips before revision 3.0 didn't have this
1643 * functionality, so process EOC events if this is the
1644 * case.
1645 *
1646 **************************************************************/
1da177e4 1647
c659c38b 1648static u32 tlan_handle_tx_eoc(struct net_device *dev, u16 host_int)
1da177e4 1649{
c659c38b
SA		 1650 struct tlan_priv *priv = netdev_priv(dev);
1651 struct tlan_list *head_list;
1da177e4
LT		 1652 dma_addr_t head_list_phys;
1653 u32 ack = 1;
6aa20a22 1654
1da177e4 1655 host_int = 0;
c659c38b
SA		 1656 if (priv->tlan_rev < 0x30) {
1657 TLAN_DBG(TLAN_DEBUG_TX,
1658 "TRANSMIT: handling TX EOC (Head=%d Tail=%d) -- IRQ\n",
1659 priv->tx_head, priv->tx_tail);
1660 head_list = priv->tx_list + priv->tx_head;
1661 head_list_phys = priv->tx_list_dma
1662 + sizeof(struct tlan_list)*priv->tx_head;
f45437ef
SA		 1663 if ((head_list->c_stat & TLAN_CSTAT_READY)
1664 == TLAN_CSTAT_READY) {
1da177e4 1665 netif_stop_queue(dev);
c659c38b 1666 outl(head_list_phys, dev->base_addr + TLAN_CH_PARM);
1da177e4
LT		 1667 ack |= TLAN_HC_GO;
1668 } else {
c659c38b 1669 priv->tx_in_progress = 0;
1da177e4
LT		 1670 }
1671 }
1672
1673 return ack;
1674
c659c38b 1675}
1da177e4
LT		 1676
1677
1678
1679
c659c38b
SA		 1680/***************************************************************
1681 * tlan_handle_status_check
1682 *
1683 * Returns:
1684 * 0 if Adapter check, 1 if Network Status check.
1685 * Parms:
1686 * dev Device assigned the IRQ that was
1687 * raised.
1688 * host_int The contents of the HOST_INT
1689 * port.
1690 *
1691 * This function handles Adapter Check/Network Status
1692 * interrupts generated by the adapter. It checks the
1693 * vector in the HOST_INT register to determine if it is
1694 * an Adapter Check interrupt. If so, it resets the
1695 * adapter. Otherwise it clears the status registers
1696 * and services the PHY.
1697 *
1698 **************************************************************/
1da177e4 1699
c659c38b 1700static u32 tlan_handle_status_check(struct net_device *dev, u16 host_int)
6aa20a22 1701{
c659c38b 1702 struct tlan_priv *priv = netdev_priv(dev);
1da177e4
LT		 1703 u32 ack;
1704 u32 error;
1705 u8 net_sts;
1706 u32 phy;
1707 u16 tlphy_ctl;
1708 u16 tlphy_sts;
6aa20a22 1709
1da177e4 1710 ack = 1;
c659c38b
SA		 1711 if (host_int & TLAN_HI_IV_MASK) {
1712 netif_stop_queue(dev);
1713 error = inl(dev->base_addr + TLAN_CH_PARM);
50624aab 1714 netdev_info(dev, "Adaptor Error = 0x%x\n", error);
c659c38b
SA		 1715 tlan_read_and_clear_stats(dev, TLAN_RECORD);
1716 outl(TLAN_HC_AD_RST, dev->base_addr + TLAN_HOST_CMD);
1da177e4
LT		 1717
1718 schedule_work(&priv->tlan_tqueue);
1719
1720 netif_wake_queue(dev);
1721 ack = 0;
1722 } else {
c659c38b
SA		 1723 TLAN_DBG(TLAN_DEBUG_GNRL, "%s: Status Check\n", dev->name);
1724 phy = priv->phy[priv->phy_num];
1725
1726 net_sts = tlan_dio_read8(dev->base_addr, TLAN_NET_STS);
1727 if (net_sts) {
1728 tlan_dio_write8(dev->base_addr, TLAN_NET_STS, net_sts);
1729 TLAN_DBG(TLAN_DEBUG_GNRL, "%s: Net_Sts = %x\n",
1730 dev->name, (unsigned) net_sts);
1da177e4 1731 }
c659c38b
SA		 1732 if ((net_sts & TLAN_NET_STS_MIRQ) && (priv->phy_num == 0)) {
1733 tlan_mii_read_reg(dev, phy, TLAN_TLPHY_STS, &tlphy_sts);
1734 tlan_mii_read_reg(dev, phy, TLAN_TLPHY_CTL, &tlphy_ctl);
1735 if (!(tlphy_sts & TLAN_TS_POLOK) &&
1736 !(tlphy_ctl & TLAN_TC_SWAPOL)) {
1737 tlphy_ctl |= TLAN_TC_SWAPOL;
1738 tlan_mii_write_reg(dev, phy, TLAN_TLPHY_CTL,
1739 tlphy_ctl);
1740 } else if ((tlphy_sts & TLAN_TS_POLOK) &&
1741 (tlphy_ctl & TLAN_TC_SWAPOL)) {
1742 tlphy_ctl &= ~TLAN_TC_SWAPOL;
1743 tlan_mii_write_reg(dev, phy, TLAN_TLPHY_CTL,
1744 tlphy_ctl);
1da177e4 1745 }
c659c38b
SA		 1746
1747 if (debug)
1748 tlan_phy_print(dev);
1da177e4
LT		 1749 }
1750 }
1751
1752 return ack;
1753
c659c38b 1754}
1da177e4
LT		 1755
1756
1757
1758
c659c38b
SA		 1759/***************************************************************
1760 * tlan_handle_rx_eoc
1761 *
1762 * Returns:
1763 * 1
1764 * Parms:
1765 * dev Device assigned the IRQ that was
1766 * raised.
1767 * host_int The contents of the HOST_INT
1768 * port.
1769 *
1770 * This driver is structured to determine EOC occurrences by
1771 * reading the CSTAT member of the list structure. Rx EOC
1772 * interrupts are disabled via the DIO INTDIS register.
1773 * However, TLAN chips before revision 3.0 didn't have this
1774 * CSTAT member or a INTDIS register, so if this chip is
1775 * pre-3.0, process EOC interrupts normally.
1776 *
1777 **************************************************************/
1da177e4 1778
c659c38b 1779static u32 tlan_handle_rx_eoc(struct net_device *dev, u16 host_int)
1da177e4 1780{
c659c38b 1781 struct tlan_priv *priv = netdev_priv(dev);
1da177e4
LT		 1782 dma_addr_t head_list_phys;
1783 u32 ack = 1;
1784
c659c38b
SA		 1785 if (priv->tlan_rev < 0x30) {
1786 TLAN_DBG(TLAN_DEBUG_RX,
1787 "RECEIVE: Handling RX EOC (head=%d tail=%d) -- IRQ\n",
1788 priv->rx_head, priv->rx_tail);
1789 head_list_phys = priv->rx_list_dma
1790 + sizeof(struct tlan_list)*priv->rx_head;
1791 outl(head_list_phys, dev->base_addr + TLAN_CH_PARM);
1da177e4 1792 ack |= TLAN_HC_GO | TLAN_HC_RT;
c659c38b 1793 priv->rx_eoc_count++;
1da177e4
LT		 1794 }
1795
1796 return ack;
1797
c659c38b 1798}
1da177e4
LT		 1799
1800
1801
1802
1803/*****************************************************************************
1804******************************************************************************
1805
c659c38b 1806ThunderLAN driver timer function
1da177e4
LT		 1807
1808******************************************************************************
1809*****************************************************************************/
1810
1811
c659c38b
SA		 1812/***************************************************************
1813 * tlan_timer
1814 *
1815 * Returns:
1816 * Nothing
1817 * Parms:
1818 * data A value given to add timer when
1819 * add_timer was called.
1820 *
1821 * This function handles timed functionality for the
1822 * TLAN driver. The two current timer uses are for
1823 * delaying for autonegotionation and driving the ACT LED.
1824 * - Autonegotiation requires being allowed about
1825 * 2 1/2 seconds before attempting to transmit a
1826 * packet. It would be a very bad thing to hang
1827 * the kernel this long, so the driver doesn't
1828 * allow transmission 'til after this time, for
1829 * certain PHYs. It would be much nicer if all
1830 * PHYs were interrupt-capable like the internal
1831 * PHY.
1832 * - The ACT LED, which shows adapter activity, is
1833 * driven by the driver, and so must be left on
1834 * for a short period to power up the LED so it
1835 * can be seen. This delay can be changed by
1836 * changing the TLAN_TIMER_ACT_DELAY in tlan.h,
1837 * if desired. 100 ms produces a slightly
1838 * sluggish response.
1839 *
1840 **************************************************************/
1841
1842static void tlan_timer(unsigned long data)
1da177e4
LT		 1843{
1844 struct net_device *dev = (struct net_device *) data;
c659c38b 1845 struct tlan_priv *priv = netdev_priv(dev);
1da177e4
LT		 1846 u32 elapsed;
1847 unsigned long flags = 0;
1848
1849 priv->timer.function = NULL;
1850
c659c38b 1851 switch (priv->timer_type) {
c659c38b
SA		 1852 case TLAN_TIMER_PHY_PDOWN:
1853 tlan_phy_power_down(dev);
1854 break;
1855 case TLAN_TIMER_PHY_PUP:
1856 tlan_phy_power_up(dev);
1857 break;
1858 case TLAN_TIMER_PHY_RESET:
1859 tlan_phy_reset(dev);
1860 break;
1861 case TLAN_TIMER_PHY_START_LINK:
1862 tlan_phy_start_link(dev);
1863 break;
1864 case TLAN_TIMER_PHY_FINISH_AN:
1865 tlan_phy_finish_auto_neg(dev);
1866 break;
1867 case TLAN_TIMER_FINISH_RESET:
1868 tlan_finish_reset(dev);
1869 break;
1870 case TLAN_TIMER_ACTIVITY:
1871 spin_lock_irqsave(&priv->lock, flags);
1872 if (priv->timer.function == NULL) {
1873 elapsed = jiffies - priv->timer_set_at;
1874 if (elapsed >= TLAN_TIMER_ACT_DELAY) {
1875 tlan_dio_write8(dev->base_addr,
1876 TLAN_LED_REG, TLAN_LED_LINK);
1877 } else {
1878 priv->timer.function = tlan_timer;
1879 priv->timer.expires = priv->timer_set_at
1880 + TLAN_TIMER_ACT_DELAY;
1881 spin_unlock_irqrestore(&priv->lock, flags);
1882 add_timer(&priv->timer);
1883 break;
1da177e4 1884 }
c659c38b
SA		 1885 }
1886 spin_unlock_irqrestore(&priv->lock, flags);
1887 break;
1888 default:
1889 break;
1da177e4
LT		 1890 }
1891
c659c38b 1892}
1da177e4
LT		 1893
1894
1da177e4
LT		 1895/*****************************************************************************
1896******************************************************************************
1897
c659c38b 1898ThunderLAN driver adapter related routines
1da177e4
LT		 1899
1900******************************************************************************
1901*****************************************************************************/
1902
1903
c659c38b
SA		 1904/***************************************************************
1905 * tlan_reset_lists
1906 *
1907 * Returns:
1908 * Nothing
1909 * Parms:
1910 * dev The device structure with the list
1911 * stuctures to be reset.
1912 *
1913 * This routine sets the variables associated with managing
1914 * the TLAN lists to their initial values.
1915 *
1916 **************************************************************/
1917
1918static void tlan_reset_lists(struct net_device *dev)
1da177e4 1919{
c659c38b 1920 struct tlan_priv *priv = netdev_priv(dev);
1da177e4 1921 int i;
c659c38b 1922 struct tlan_list *list;
1da177e4
LT		 1923 dma_addr_t list_phys;
1924 struct sk_buff *skb;
1da177e4 1925
c659c38b
SA		 1926 priv->tx_head = 0;
1927 priv->tx_tail = 0;
1928 for (i = 0; i < TLAN_NUM_TX_LISTS; i++) {
1929 list = priv->tx_list + i;
1930 list->c_stat = TLAN_CSTAT_UNUSED;
5eeabf51 1931 list->buffer[0].address = 0;
1da177e4
LT		 1932 list->buffer[2].count = 0;
1933 list->buffer[2].address = 0;
1934 list->buffer[8].address = 0;
1935 list->buffer[9].address = 0;
1936 }
1937
c659c38b
SA		 1938 priv->rx_head = 0;
1939 priv->rx_tail = TLAN_NUM_RX_LISTS - 1;
1940 for (i = 0; i < TLAN_NUM_RX_LISTS; i++) {
1941 list = priv->rx_list + i;
1942 list_phys = priv->rx_list_dma + sizeof(struct tlan_list)*i;
1943 list->c_stat = TLAN_CSTAT_READY;
1944 list->frame_size = TLAN_MAX_FRAME_SIZE;
1da177e4 1945 list->buffer[0].count = TLAN_MAX_FRAME_SIZE | TLAN_LAST_BUFFER;
89d71a66 1946 skb = netdev_alloc_skb_ip_align(dev, TLAN_MAX_FRAME_SIZE + 5);
720a43ef 1947 if (!skb)
5eeabf51 1948 break;
5eeabf51 1949
c659c38b 1950 list->buffer[0].address = pci_map_single(priv->pci_dev,
5eeabf51
SA		 1951 skb->data,
1952 TLAN_MAX_FRAME_SIZE,
1953 PCI_DMA_FROMDEVICE);
c659c38b 1954 tlan_store_skb(list, skb);
1da177e4
LT		 1955 list->buffer[1].count = 0;
1956 list->buffer[1].address = 0;
c659c38b 1957 list->forward = list_phys + sizeof(struct tlan_list);
9ded65a1
SH		 1958 }
1959
1960 /* in case ran out of memory early, clear bits */
1961 while (i < TLAN_NUM_RX_LISTS) {
c659c38b 1962 tlan_store_skb(priv->rx_list + i, NULL);
9ded65a1 1963 ++i;
1da177e4 1964 }
9ded65a1 1965 list->forward = 0;
1da177e4 1966
c659c38b 1967}
1da177e4
LT		 1968
1969
c659c38b 1970static void tlan_free_lists(struct net_device *dev)
1da177e4 1971{
c659c38b 1972 struct tlan_priv *priv = netdev_priv(dev);
1da177e4 1973 int i;
c659c38b 1974 struct tlan_list *list;
1da177e4
LT		 1975 struct sk_buff *skb;
1976
c659c38b
SA		 1977 for (i = 0; i < TLAN_NUM_TX_LISTS; i++) {
1978 list = priv->tx_list + i;
1979 skb = tlan_get_skb(list);
1980 if (skb) {
5eeabf51 1981 pci_unmap_single(
c659c38b 1982 priv->pci_dev,
5eeabf51
SA		 1983 list->buffer[0].address,
1984 max(skb->len,
1985 (unsigned int)TLAN_MIN_FRAME_SIZE),
1986 PCI_DMA_TODEVICE);
c659c38b 1987 dev_kfree_skb_any(skb);
5eeabf51
SA		 1988 list->buffer[8].address = 0;
1989 list->buffer[9].address = 0;
1da177e4 1990 }
5eeabf51 1991 }
1da177e4 1992
c659c38b
SA		 1993 for (i = 0; i < TLAN_NUM_RX_LISTS; i++) {
1994 list = priv->rx_list + i;
1995 skb = tlan_get_skb(list);
1996 if (skb) {
1997 pci_unmap_single(priv->pci_dev,
5eeabf51
SA		 1998 list->buffer[0].address,
1999 TLAN_MAX_FRAME_SIZE,
2000 PCI_DMA_FROMDEVICE);
c659c38b 2001 dev_kfree_skb_any(skb);
5eeabf51
SA		 2002 list->buffer[8].address = 0;
2003 list->buffer[9].address = 0;
1da177e4
LT		 2004 }
2005 }
c659c38b 2006}
1da177e4
LT		 2007
2008
2009
2010
c659c38b
SA		 2011/***************************************************************
2012 * tlan_print_dio
2013 *
2014 * Returns:
2015 * Nothing
2016 * Parms:
2017 * io_base Base IO port of the device of
2018 * which to print DIO registers.
2019 *
2020 * This function prints out all the internal (DIO)
2021 * registers of a TLAN chip.
2022 *
2023 **************************************************************/
1da177e4 2024
c659c38b 2025static void tlan_print_dio(u16 io_base)
1da177e4
LT		 2026{
2027 u32 data0, data1;
2028 int i;
2029
50624aab
JP		 2030 pr_info("Contents of internal registers for io base 0x%04hx\n",
2031 io_base);
2032 pr_info("Off. +0 +4\n");
c659c38b
SA		 2033 for (i = 0; i < 0x4C; i += 8) {
2034 data0 = tlan_dio_read32(io_base, i);
2035 data1 = tlan_dio_read32(io_base, i + 0x4);
50624aab 2036 pr_info("0x%02x 0x%08x 0x%08x\n", i, data0, data1);
1da177e4
LT		 2037 }
2038
c659c38b 2039}
1da177e4
LT		 2040
2041
2042
2043
c659c38b
SA		 2044/***************************************************************
2045 * TLan_PrintList
2046 *
2047 * Returns:
2048 * Nothing
2049 * Parms:
2050 * list A pointer to the struct tlan_list structure to
2051 * be printed.
2052 * type A string to designate type of list,
2053 * "Rx" or "Tx".
2054 * num The index of the list.
2055 *
2056 * This function prints out the contents of the list
2057 * pointed to by the list parameter.
2058 *
2059 **************************************************************/
1da177e4 2060
c659c38b 2061static void tlan_print_list(struct tlan_list *list, char *type, int num)
1da177e4
LT		 2062{
2063 int i;
2064
50624aab
JP		 2065 pr_info("%s List %d at %p\n", type, num, list);
2066 pr_info(" Forward = 0x%08x\n", list->forward);
2067 pr_info(" CSTAT = 0x%04hx\n", list->c_stat);
2068 pr_info(" Frame Size = 0x%04hx\n", list->frame_size);
c659c38b
SA		 2069 /* for (i = 0; i < 10; i++) { */
2070 for (i = 0; i < 2; i++) {
50624aab
JP		 2071 pr_info(" Buffer[%d].count, addr = 0x%08x, 0x%08x\n",
2072 i, list->buffer[i].count, list->buffer[i].address);
1da177e4
LT		 2073 }
2074
c659c38b 2075}
1da177e4
LT		 2076
2077
2078
2079
c659c38b
SA		 2080/***************************************************************
2081 * tlan_read_and_clear_stats
2082 *
2083 * Returns:
2084 * Nothing
2085 * Parms:
2086 * dev Pointer to device structure of adapter
2087 * to which to read stats.
2088 * record Flag indicating whether to add
2089 *
2090 * This functions reads all the internal status registers
2091 * of the TLAN chip, which clears them as a side effect.
2092 * It then either adds the values to the device's status
2093 * struct, or discards them, depending on whether record
2094 * is TLAN_RECORD (!=0) or TLAN_IGNORE (==0).
2095 *
2096 **************************************************************/
1da177e4 2097
c659c38b 2098static void tlan_read_and_clear_stats(struct net_device *dev, int record)
1da177e4 2099{
1da177e4
LT		 2100 u32 tx_good, tx_under;
2101 u32 rx_good, rx_over;
2102 u32 def_tx, crc, code;
2103 u32 multi_col, single_col;
2104 u32 excess_col, late_col, loss;
2105
c659c38b
SA		 2106 outw(TLAN_GOOD_TX_FRMS, dev->base_addr + TLAN_DIO_ADR);
2107 tx_good = inb(dev->base_addr + TLAN_DIO_DATA);
2108 tx_good += inb(dev->base_addr + TLAN_DIO_DATA + 1) << 8;
2109 tx_good += inb(dev->base_addr + TLAN_DIO_DATA + 2) << 16;
2110 tx_under = inb(dev->base_addr + TLAN_DIO_DATA + 3);
2111
2112 outw(TLAN_GOOD_RX_FRMS, dev->base_addr + TLAN_DIO_ADR);
2113 rx_good = inb(dev->base_addr + TLAN_DIO_DATA);
2114 rx_good += inb(dev->base_addr + TLAN_DIO_DATA + 1) << 8;
2115 rx_good += inb(dev->base_addr + TLAN_DIO_DATA + 2) << 16;
2116 rx_over = inb(dev->base_addr + TLAN_DIO_DATA + 3);
2117
2118 outw(TLAN_DEFERRED_TX, dev->base_addr + TLAN_DIO_ADR);
2119 def_tx = inb(dev->base_addr + TLAN_DIO_DATA);
2120 def_tx += inb(dev->base_addr + TLAN_DIO_DATA + 1) << 8;
2121 crc = inb(dev->base_addr + TLAN_DIO_DATA + 2);
2122 code = inb(dev->base_addr + TLAN_DIO_DATA + 3);
2123
2124 outw(TLAN_MULTICOL_FRMS, dev->base_addr + TLAN_DIO_ADR);
2125 multi_col = inb(dev->base_addr + TLAN_DIO_DATA);
2126 multi_col += inb(dev->base_addr + TLAN_DIO_DATA + 1) << 8;
2127 single_col = inb(dev->base_addr + TLAN_DIO_DATA + 2);
2128 single_col += inb(dev->base_addr + TLAN_DIO_DATA + 3) << 8;
2129
2130 outw(TLAN_EXCESSCOL_FRMS, dev->base_addr + TLAN_DIO_ADR);
2131 excess_col = inb(dev->base_addr + TLAN_DIO_DATA);
2132 late_col = inb(dev->base_addr + TLAN_DIO_DATA + 1);
2133 loss = inb(dev->base_addr + TLAN_DIO_DATA + 2);
2134
2135 if (record) {
f8f31544
SH		 2136 dev->stats.rx_packets += rx_good;
2137 dev->stats.rx_errors += rx_over + crc + code;
2138 dev->stats.tx_packets += tx_good;
2139 dev->stats.tx_errors += tx_under + loss;
c659c38b
SA		 2140 dev->stats.collisions += multi_col
2141 + single_col + excess_col + late_col;
f8f31544
SH		 2142
2143 dev->stats.rx_over_errors += rx_over;
2144 dev->stats.rx_crc_errors += crc;
2145 dev->stats.rx_frame_errors += code;
2146
2147 dev->stats.tx_aborted_errors += tx_under;
2148 dev->stats.tx_carrier_errors += loss;
1da177e4 2149 }
6aa20a22 2150
c659c38b 2151}
1da177e4
LT		 2152
2153
2154
2155
c659c38b
SA		 2156/***************************************************************
2157 * TLan_Reset
2158 *
2159 * Returns:
2160 * 0
2161 * Parms:
2162 * dev Pointer to device structure of adapter
2163 * to be reset.
2164 *
2165 * This function resets the adapter and it's physical
2166 * device. See Chap. 3, pp. 9-10 of the "ThunderLAN
2167 * Programmer's Guide" for details. The routine tries to
2168 * implement what is detailed there, though adjustments
2169 * have been made.
2170 *
2171 **************************************************************/
1da177e4 2172
98e0f521 2173static void
c659c38b 2174tlan_reset_adapter(struct net_device *dev)
1da177e4 2175{
c659c38b 2176 struct tlan_priv *priv = netdev_priv(dev);
1da177e4
LT		 2177 int i;
2178 u32 addr;
2179 u32 data;
2180 u8 data8;
2181
c659c38b
SA		 2182 priv->tlan_full_duplex = false;
2183 priv->phy_online = 0;
1da177e4
LT		 2184 netif_carrier_off(dev);
2185
2186/* 1. Assert reset bit. */
2187
2188 data = inl(dev->base_addr + TLAN_HOST_CMD);
2189 data |= TLAN_HC_AD_RST;
2190 outl(data, dev->base_addr + TLAN_HOST_CMD);
6aa20a22 2191
1da177e4
LT		 2192 udelay(1000);
2193
c659c38b 2194/* 2. Turn off interrupts. (Probably isn't necessary) */
1da177e4
LT		 2195
2196 data = inl(dev->base_addr + TLAN_HOST_CMD);
2197 data |= TLAN_HC_INT_OFF;
2198 outl(data, dev->base_addr + TLAN_HOST_CMD);
2199
2200/* 3. Clear AREGs and HASHs. */
2201
c659c38b
SA		 2202 for (i = TLAN_AREG_0; i <= TLAN_HASH_2; i += 4)
2203 tlan_dio_write32(dev->base_addr, (u16) i, 0);
1da177e4
LT		 2204
2205/* 4. Setup NetConfig register. */
2206
2207 data = TLAN_NET_CFG_1FRAG | TLAN_NET_CFG_1CHAN | TLAN_NET_CFG_PHY_EN;
c659c38b 2208 tlan_dio_write16(dev->base_addr, TLAN_NET_CONFIG, (u16) data);
1da177e4
LT		 2209
2210/* 5. Load Ld_Tmr and Ld_Thr in HOST_CMD. */
2211
c659c38b
SA		 2212 outl(TLAN_HC_LD_TMR | 0x3f, dev->base_addr + TLAN_HOST_CMD);
2213 outl(TLAN_HC_LD_THR | 0x9, dev->base_addr + TLAN_HOST_CMD);
1da177e4
LT		 2214
2215/* 6. Unreset the MII by setting NMRST (in NetSio) to 1. */
2216
c659c38b 2217 outw(TLAN_NET_SIO, dev->base_addr + TLAN_DIO_ADR);
1da177e4 2218 addr = dev->base_addr + TLAN_DIO_DATA + TLAN_NET_SIO;
c659c38b 2219 tlan_set_bit(TLAN_NET_SIO_NMRST, addr);
1da177e4
LT		 2220
2221/* 7. Setup the remaining registers. */
2222
c659c38b 2223 if (priv->tlan_rev >= 0x30) {
1da177e4 2224 data8 = TLAN_ID_TX_EOC | TLAN_ID_RX_EOC;
c659c38b 2225 tlan_dio_write8(dev->base_addr, TLAN_INT_DIS, data8);
1da177e4 2226 }
c659c38b 2227 tlan_phy_detect(dev);
1da177e4 2228 data = TLAN_NET_CFG_1FRAG | TLAN_NET_CFG_1CHAN;
6aa20a22 2229
c659c38b 2230 if (priv->adapter->flags & TLAN_ADAPTER_BIT_RATE_PHY) {
1da177e4 2231 data |= TLAN_NET_CFG_BIT;
c659c38b
SA		 2232 if (priv->aui == 1) {
2233 tlan_dio_write8(dev->base_addr, TLAN_ACOMMIT, 0x0a);
2234 } else if (priv->duplex == TLAN_DUPLEX_FULL) {
2235 tlan_dio_write8(dev->base_addr, TLAN_ACOMMIT, 0x00);
2236 priv->tlan_full_duplex = true;
1da177e4 2237 } else {
c659c38b 2238 tlan_dio_write8(dev->base_addr, TLAN_ACOMMIT, 0x08);
1da177e4
LT		 2239 }
2240 }
2241
7a72eddc
OZ		 2242 /* don't power down internal PHY if we're going to use it */
2243 if (priv->phy_num == 0 ||
2244 (priv->adapter->flags & TLAN_ADAPTER_USE_INTERN_10))
1da177e4 2245 data |= TLAN_NET_CFG_PHY_EN;
c659c38b 2246 tlan_dio_write16(dev->base_addr, TLAN_NET_CONFIG, (u16) data);
1da177e4 2247
c659c38b
SA		 2248 if (priv->adapter->flags & TLAN_ADAPTER_UNMANAGED_PHY)
2249 tlan_finish_reset(dev);
2250 else
2251 tlan_phy_power_down(dev);
1da177e4 2252
c659c38b 2253}
1da177e4
LT		 2254
2255
2256
2257
98e0f521 2258static void
c659c38b 2259tlan_finish_reset(struct net_device *dev)
1da177e4 2260{
c659c38b 2261 struct tlan_priv *priv = netdev_priv(dev);
1da177e4
LT		 2262 u8 data;
2263 u32 phy;
2264 u8 sio;
2265 u16 status;
2266 u16 partner;
2267 u16 tlphy_ctl;
c659c38b 2268 u16 tlphy_par;
1da177e4 2269 u16 tlphy_id1, tlphy_id2;
c659c38b 2270 int i;
1da177e4 2271
c659c38b 2272 phy = priv->phy[priv->phy_num];
1da177e4
LT		 2273
2274 data = TLAN_NET_CMD_NRESET | TLAN_NET_CMD_NWRAP;
c659c38b 2275 if (priv->tlan_full_duplex)
1da177e4 2276 data |= TLAN_NET_CMD_DUPLEX;
c659c38b 2277 tlan_dio_write8(dev->base_addr, TLAN_NET_CMD, data);
6aa20a22 2278 data = TLAN_NET_MASK_MASK4 | TLAN_NET_MASK_MASK5;
c659c38b 2279 if (priv->phy_num == 0)
6aa20a22 2280 data |= TLAN_NET_MASK_MASK7;
c659c38b
SA		 2281 tlan_dio_write8(dev->base_addr, TLAN_NET_MASK, data);
2282 tlan_dio_write16(dev->base_addr, TLAN_MAX_RX, ((1536)+7)&~7);
2283 tlan_mii_read_reg(dev, phy, MII_GEN_ID_HI, &tlphy_id1);
2284 tlan_mii_read_reg(dev, phy, MII_GEN_ID_LO, &tlphy_id2);
6aa20a22 2285
c659c38b
SA		 2286 if ((priv->adapter->flags & TLAN_ADAPTER_UNMANAGED_PHY) ||
2287 (priv->aui)) {
1da177e4 2288 status = MII_GS_LINK;
50624aab 2289 netdev_info(dev, "Link forced\n");
1da177e4 2290 } else {
c659c38b
SA		 2291 tlan_mii_read_reg(dev, phy, MII_GEN_STS, &status);
2292 udelay(1000);
2293 tlan_mii_read_reg(dev, phy, MII_GEN_STS, &status);
c0a87c22
OZ		 2294 if (status & MII_GS_LINK) {
2295 /* We only support link info on Nat.Sem. PHY's */
2296 if ((tlphy_id1 == NAT_SEM_ID1) &&
2297 (tlphy_id2 == NAT_SEM_ID2)) {
2298 tlan_mii_read_reg(dev, phy, MII_AN_LPA,
2299 &partner);
2300 tlan_mii_read_reg(dev, phy, TLAN_TLPHY_PAR,
2301 &tlphy_par);
2302
2303 netdev_info(dev,
2304 "Link active, %s %uMbps %s-Duplex\n",
2305 !(tlphy_par & TLAN_PHY_AN_EN_STAT)
2306 ? "forced" : "Autonegotiation enabled,",
2307 tlphy_par & TLAN_PHY_SPEED_100
2308 ? 100 : 10,
2309 tlphy_par & TLAN_PHY_DUPLEX_FULL
2310 ? "Full" : "Half");
2311
2312 if (tlphy_par & TLAN_PHY_AN_EN_STAT) {
2313 netdev_info(dev, "Partner capability:");
2314 for (i = 5; i < 10; i++)
2315 if (partner & (1 << i))
2316 pr_cont(" %s",
2317 media[i-5]);
2318 pr_cont("\n");
2319 }
2320 } else
2321 netdev_info(dev, "Link active\n");
2322 /* Enabling link beat monitoring */
2323 priv->media_timer.function = tlan_phy_monitor;
2324 priv->media_timer.data = (unsigned long) dev;
2325 priv->media_timer.expires = jiffies + HZ;
2326 add_timer(&priv->media_timer);
1da177e4
LT		 2327 }
2328 }
2329
c659c38b
SA		 2330 if (priv->phy_num == 0) {
2331 tlan_mii_read_reg(dev, phy, TLAN_TLPHY_CTL, &tlphy_ctl);
2332 tlphy_ctl |= TLAN_TC_INTEN;
2333 tlan_mii_write_reg(dev, phy, TLAN_TLPHY_CTL, tlphy_ctl);
2334 sio = tlan_dio_read8(dev->base_addr, TLAN_NET_SIO);
2335 sio |= TLAN_NET_SIO_MINTEN;
2336 tlan_dio_write8(dev->base_addr, TLAN_NET_SIO, sio);
2337 }
2338
2339 if (status & MII_GS_LINK) {
2340 tlan_set_mac(dev, 0, dev->dev_addr);
2341 priv->phy_online = 1;
2342 outb((TLAN_HC_INT_ON >> 8), dev->base_addr + TLAN_HOST_CMD + 1);
2343 if (debug >= 1 && debug != TLAN_DEBUG_PROBE)
2344 outb((TLAN_HC_REQ_INT >> 8),
2345 dev->base_addr + TLAN_HOST_CMD + 1);
2346 outl(priv->rx_list_dma, dev->base_addr + TLAN_CH_PARM);
2347 outl(TLAN_HC_GO | TLAN_HC_RT, dev->base_addr + TLAN_HOST_CMD);
c0a87c22 2348 tlan_dio_write8(dev->base_addr, TLAN_LED_REG, TLAN_LED_LINK);
1da177e4
LT		 2349 netif_carrier_on(dev);
2350 } else {
50624aab 2351 netdev_info(dev, "Link inactive, will retry in 10 secs...\n");
c659c38b 2352 tlan_set_timer(dev, (10*HZ), TLAN_TIMER_FINISH_RESET);
1da177e4
LT		 2353 return;
2354 }
c659c38b 2355 tlan_set_multicast_list(dev);
1da177e4 2356
c659c38b 2357}
1da177e4
LT		 2358
2359
2360
2361
c659c38b
SA		 2362/***************************************************************
2363 * tlan_set_mac
2364 *
2365 * Returns:
2366 * Nothing
2367 * Parms:
2368 * dev Pointer to device structure of adapter
2369 * on which to change the AREG.
2370 * areg The AREG to set the address in (0 - 3).
2371 * mac A pointer to an array of chars. Each
2372 * element stores one byte of the address.
2373 * IE, it isn't in ascii.
2374 *
2375 * This function transfers a MAC address to one of the
2376 * TLAN AREGs (address registers). The TLAN chip locks
2377 * the register on writing to offset 0 and unlocks the
2378 * register after writing to offset 5. If NULL is passed
2379 * in mac, then the AREG is filled with 0's.
2380 *
2381 **************************************************************/
1da177e4 2382
c659c38b 2383static void tlan_set_mac(struct net_device *dev, int areg, char *mac)
1da177e4
LT		 2384{
2385 int i;
6aa20a22 2386
1da177e4
LT		 2387 areg *= 6;
2388
c659c38b
SA		 2389 if (mac != NULL) {
2390 for (i = 0; i < 6; i++)
2391 tlan_dio_write8(dev->base_addr,
2392 TLAN_AREG_0 + areg + i, mac[i]);
1da177e4 2393 } else {
c659c38b
SA		 2394 for (i = 0; i < 6; i++)
2395 tlan_dio_write8(dev->base_addr,
2396 TLAN_AREG_0 + areg + i, 0);
1da177e4
LT		 2397 }
2398
c659c38b 2399}
1da177e4
LT		 2400
2401
2402
2403
2404/*****************************************************************************
2405******************************************************************************
2406
c659c38b 2407ThunderLAN driver PHY layer routines
1da177e4
LT		 2408
2409******************************************************************************
2410*****************************************************************************/
2411
2412
2413
c659c38b
SA		 2414/*********************************************************************
2415 * tlan_phy_print
2416 *
2417 * Returns:
2418 * Nothing
2419 * Parms:
2420 * dev A pointer to the device structure of the
2421 * TLAN device having the PHYs to be detailed.
2422 *
2423 * This function prints the registers a PHY (aka transceiver).
2424 *
2425 ********************************************************************/
1da177e4 2426
c659c38b 2427static void tlan_phy_print(struct net_device *dev)
1da177e4 2428{
c659c38b 2429 struct tlan_priv *priv = netdev_priv(dev);
1da177e4
LT		 2430 u16 i, data0, data1, data2, data3, phy;
2431
c659c38b
SA		 2432 phy = priv->phy[priv->phy_num];
2433
2434 if (priv->adapter->flags & TLAN_ADAPTER_UNMANAGED_PHY) {
50624aab 2435 netdev_info(dev, "Unmanaged PHY\n");
c659c38b 2436 } else if (phy <= TLAN_PHY_MAX_ADDR) {
50624aab
JP		 2437 netdev_info(dev, "PHY 0x%02x\n", phy);
2438 pr_info(" Off. +0 +1 +2 +3\n");
c659c38b 2439 for (i = 0; i < 0x20; i += 4) {
c659c38b 2440 tlan_mii_read_reg(dev, phy, i, &data0);
c659c38b 2441 tlan_mii_read_reg(dev, phy, i + 1, &data1);
c659c38b 2442 tlan_mii_read_reg(dev, phy, i + 2, &data2);
c659c38b 2443 tlan_mii_read_reg(dev, phy, i + 3, &data3);
50624aab
JP		 2444 pr_info(" 0x%02x 0x%04hx 0x%04hx 0x%04hx 0x%04hx\n",
2445 i, data0, data1, data2, data3);
1da177e4
LT		 2446 }
2447 } else {
50624aab 2448 netdev_info(dev, "Invalid PHY\n");
1da177e4
LT		 2449 }
2450
c659c38b 2451}
1da177e4
LT		 2452
2453
2454
2455
c659c38b
SA		 2456/*********************************************************************
2457 * tlan_phy_detect
2458 *
2459 * Returns:
2460 * Nothing
2461 * Parms:
2462 * dev A pointer to the device structure of the adapter
2463 * for which the PHY needs determined.
2464 *
2465 * So far I've found that adapters which have external PHYs
2466 * may also use the internal PHY for part of the functionality.
2467 * (eg, AUI/Thinnet). This function finds out if this TLAN
2468 * chip has an internal PHY, and then finds the first external
2469 * PHY (starting from address 0) if it exists).
2470 *
2471 ********************************************************************/
1da177e4 2472
c659c38b 2473static void tlan_phy_detect(struct net_device *dev)
1da177e4 2474{
c659c38b 2475 struct tlan_priv *priv = netdev_priv(dev);
1da177e4
LT		 2476 u16 control;
2477 u16 hi;
2478 u16 lo;
2479 u32 phy;
2480
c659c38b
SA		 2481 if (priv->adapter->flags & TLAN_ADAPTER_UNMANAGED_PHY) {
2482 priv->phy_num = 0xffff;
1da177e4
LT		 2483 return;
2484 }
2485
c659c38b 2486 tlan_mii_read_reg(dev, TLAN_PHY_MAX_ADDR, MII_GEN_ID_HI, &hi);
6aa20a22 2487
c659c38b 2488 if (hi != 0xffff)
1da177e4 2489 priv->phy[0] = TLAN_PHY_MAX_ADDR;
c659c38b 2490 else
1da177e4 2491 priv->phy[0] = TLAN_PHY_NONE;
1da177e4
LT		 2492
2493 priv->phy[1] = TLAN_PHY_NONE;
c659c38b
SA		 2494 for (phy = 0; phy <= TLAN_PHY_MAX_ADDR; phy++) {
2495 tlan_mii_read_reg(dev, phy, MII_GEN_CTL, &control);
2496 tlan_mii_read_reg(dev, phy, MII_GEN_ID_HI, &hi);
2497 tlan_mii_read_reg(dev, phy, MII_GEN_ID_LO, &lo);
2498 if ((control != 0xffff) ||
2499 (hi != 0xffff) || (lo != 0xffff)) {
2500 TLAN_DBG(TLAN_DEBUG_GNRL,
2501 "PHY found at %02x %04x %04x %04x\n",
2502 phy, control, hi, lo);
2503 if ((priv->phy[1] == TLAN_PHY_NONE) &&
2504 (phy != TLAN_PHY_MAX_ADDR)) {
1da177e4
LT		 2505 priv->phy[1] = phy;
2506 }
2507 }
2508 }
2509
c659c38b
SA		 2510 if (priv->phy[1] != TLAN_PHY_NONE)
2511 priv->phy_num = 1;
2512 else if (priv->phy[0] != TLAN_PHY_NONE)
2513 priv->phy_num = 0;
2514 else
50624aab 2515 netdev_info(dev, "Cannot initialize device, no PHY was found!\n");
1da177e4 2516
c659c38b 2517}
1da177e4
LT		 2518
2519
2520
2521
c659c38b 2522static void tlan_phy_power_down(struct net_device *dev)
1da177e4 2523{
c659c38b 2524 struct tlan_priv *priv = netdev_priv(dev);
1da177e4
LT		 2525 u16 value;
2526
c659c38b 2527 TLAN_DBG(TLAN_DEBUG_GNRL, "%s: Powering down PHY(s).\n", dev->name);
1da177e4 2528 value = MII_GC_PDOWN | MII_GC_LOOPBK | MII_GC_ISOLATE;
c659c38b
SA		 2529 tlan_mii_sync(dev->base_addr);
2530 tlan_mii_write_reg(dev, priv->phy[priv->phy_num], MII_GEN_CTL, value);
2531 if ((priv->phy_num == 0) &&
2532 (priv->phy[1] != TLAN_PHY_NONE) &&
2533 (!(priv->adapter->flags & TLAN_ADAPTER_USE_INTERN_10))) {
2534 tlan_mii_sync(dev->base_addr);
2535 tlan_mii_write_reg(dev, priv->phy[1], MII_GEN_CTL, value);
1da177e4
LT		 2536 }
2537
2538 /* Wait for 50 ms and powerup
2539 * This is abitrary. It is intended to make sure the
2540 * transceiver settles.
2541 */
c659c38b 2542 tlan_set_timer(dev, (HZ/20), TLAN_TIMER_PHY_PUP);
1da177e4 2543
c659c38b 2544}
1da177e4
LT		 2545
2546
2547
2548
c659c38b 2549static void tlan_phy_power_up(struct net_device *dev)
1da177e4 2550{
c659c38b 2551 struct tlan_priv *priv = netdev_priv(dev);
1da177e4
LT		 2552 u16 value;
2553
c659c38b
SA		 2554 TLAN_DBG(TLAN_DEBUG_GNRL, "%s: Powering up PHY.\n", dev->name);
2555 tlan_mii_sync(dev->base_addr);
1da177e4 2556 value = MII_GC_LOOPBK;
c659c38b
SA		 2557 tlan_mii_write_reg(dev, priv->phy[priv->phy_num], MII_GEN_CTL, value);
2558 tlan_mii_sync(dev->base_addr);
1da177e4
LT		 2559 /* Wait for 500 ms and reset the
2560 * transceiver. The TLAN docs say both 50 ms and
2561 * 500 ms, so do the longer, just in case.
2562 */
c659c38b 2563 tlan_set_timer(dev, (HZ/20), TLAN_TIMER_PHY_RESET);
1da177e4 2564
c659c38b 2565}
1da177e4
LT		 2566
2567
2568
2569
c659c38b 2570static void tlan_phy_reset(struct net_device *dev)
1da177e4 2571{
c659c38b 2572 struct tlan_priv *priv = netdev_priv(dev);
1da177e4
LT		 2573 u16 phy;
2574 u16 value;
9cff441e 2575 unsigned long timeout = jiffies + HZ;
1da177e4 2576
c659c38b 2577 phy = priv->phy[priv->phy_num];
1da177e4 2578
fd9071ec 2579 TLAN_DBG(TLAN_DEBUG_GNRL, "%s: Resetting PHY.\n", dev->name);
c659c38b 2580 tlan_mii_sync(dev->base_addr);
1da177e4 2581 value = MII_GC_LOOPBK | MII_GC_RESET;
c659c38b 2582 tlan_mii_write_reg(dev, phy, MII_GEN_CTL, value);
9cff441e 2583 do {
c659c38b 2584 tlan_mii_read_reg(dev, phy, MII_GEN_CTL, &value);
9cff441e
OZ		 2585 if (time_after(jiffies, timeout)) {
2586 netdev_err(dev, "PHY reset timeout\n");
2587 return;
2588 }
2589 } while (value & MII_GC_RESET);
1da177e4
LT		 2590
2591 /* Wait for 500 ms and initialize.
2592 * I don't remember why I wait this long.
2593 * I've changed this to 50ms, as it seems long enough.
2594 */
c659c38b 2595 tlan_set_timer(dev, (HZ/20), TLAN_TIMER_PHY_START_LINK);
1da177e4 2596
c659c38b 2597}
1da177e4
LT		 2598
2599
2600
2601
c659c38b 2602static void tlan_phy_start_link(struct net_device *dev)
1da177e4 2603{
c659c38b 2604 struct tlan_priv *priv = netdev_priv(dev);
1da177e4
LT		 2605 u16 ability;
2606 u16 control;
2607 u16 data;
2608 u16 phy;
2609 u16 status;
2610 u16 tctl;
2611
c659c38b
SA		 2612 phy = priv->phy[priv->phy_num];
2613 TLAN_DBG(TLAN_DEBUG_GNRL, "%s: Trying to activate link.\n", dev->name);
2614 tlan_mii_read_reg(dev, phy, MII_GEN_STS, &status);
2615 tlan_mii_read_reg(dev, phy, MII_GEN_STS, &ability);
1da177e4 2616
c659c38b
SA		 2617 if ((status & MII_GS_AUTONEG) &&
2618 (!priv->aui)) {
1da177e4 2619 ability = status >> 11;
c659c38b
SA		 2620 if (priv->speed == TLAN_SPEED_10 &&
2621 priv->duplex == TLAN_DUPLEX_HALF) {
2622 tlan_mii_write_reg(dev, phy, MII_GEN_CTL, 0x0000);
2623 } else if (priv->speed == TLAN_SPEED_10 &&
2624 priv->duplex == TLAN_DUPLEX_FULL) {
2625 priv->tlan_full_duplex = true;
2626 tlan_mii_write_reg(dev, phy, MII_GEN_CTL, 0x0100);
2627 } else if (priv->speed == TLAN_SPEED_100 &&
2628 priv->duplex == TLAN_DUPLEX_HALF) {
2629 tlan_mii_write_reg(dev, phy, MII_GEN_CTL, 0x2000);
2630 } else if (priv->speed == TLAN_SPEED_100 &&
2631 priv->duplex == TLAN_DUPLEX_FULL) {
2632 priv->tlan_full_duplex = true;
2633 tlan_mii_write_reg(dev, phy, MII_GEN_CTL, 0x2100);
1da177e4 2634 } else {
6aa20a22 2635
1da177e4 2636 /* Set Auto-Neg advertisement */
c659c38b
SA		 2637 tlan_mii_write_reg(dev, phy, MII_AN_ADV,
2638 (ability << 5) | 1);
1da177e4 2639 /* Enablee Auto-Neg */
c659c38b 2640 tlan_mii_write_reg(dev, phy, MII_GEN_CTL, 0x1000);
1da177e4 2641 /* Restart Auto-Neg */
c659c38b 2642 tlan_mii_write_reg(dev, phy, MII_GEN_CTL, 0x1200);
1da177e4 2643 /* Wait for 4 sec for autonegotiation
c659c38b
SA		 2644 * to complete. The max spec time is less than this
2645 * but the card need additional time to start AN.
2646 * .5 sec should be plenty extra.
2647 */
50624aab 2648 netdev_info(dev, "Starting autonegotiation\n");
c659c38b 2649 tlan_set_timer(dev, (2*HZ), TLAN_TIMER_PHY_FINISH_AN);
1da177e4
LT		 2650 return;
2651 }
6aa20a22
JG		 2652
2653 }
2654
c659c38b
SA		 2655 if ((priv->aui) && (priv->phy_num != 0)) {
2656 priv->phy_num = 0;
2657 data = TLAN_NET_CFG_1FRAG | TLAN_NET_CFG_1CHAN
2658 | TLAN_NET_CFG_PHY_EN;
2659 tlan_dio_write16(dev->base_addr, TLAN_NET_CONFIG, data);
2660 tlan_set_timer(dev, (40*HZ/1000), TLAN_TIMER_PHY_PDOWN);
1da177e4 2661 return;
c659c38b 2662 } else if (priv->phy_num == 0) {
1da177e4 2663 control = 0;
c659c38b
SA		 2664 tlan_mii_read_reg(dev, phy, TLAN_TLPHY_CTL, &tctl);
2665 if (priv->aui) {
2666 tctl |= TLAN_TC_AUISEL;
6aa20a22 2667 } else {
c659c38b
SA		 2668 tctl &= ~TLAN_TC_AUISEL;
2669 if (priv->duplex == TLAN_DUPLEX_FULL) {
1da177e4 2670 control |= MII_GC_DUPLEX;
c659c38b 2671 priv->tlan_full_duplex = true;
1da177e4 2672 }
c659c38b 2673 if (priv->speed == TLAN_SPEED_100)
1da177e4 2674 control |= MII_GC_SPEEDSEL;
1da177e4 2675 }
c659c38b
SA		 2676 tlan_mii_write_reg(dev, phy, MII_GEN_CTL, control);
2677 tlan_mii_write_reg(dev, phy, TLAN_TLPHY_CTL, tctl);
1da177e4
LT		 2678 }
2679
2680 /* Wait for 2 sec to give the transceiver time
2681 * to establish link.
2682 */
c659c38b 2683 tlan_set_timer(dev, (4*HZ), TLAN_TIMER_FINISH_RESET);
1da177e4 2684
c659c38b 2685}
1da177e4
LT		 2686
2687
2688
2689
c659c38b 2690static void tlan_phy_finish_auto_neg(struct net_device *dev)
1da177e4 2691{
c659c38b 2692 struct tlan_priv *priv = netdev_priv(dev);
1da177e4
LT		 2693 u16 an_adv;
2694 u16 an_lpa;
1da177e4
LT		 2695 u16 mode;
2696 u16 phy;
2697 u16 status;
6aa20a22 2698
c659c38b 2699 phy = priv->phy[priv->phy_num];
1da177e4 2700
c659c38b
SA		 2701 tlan_mii_read_reg(dev, phy, MII_GEN_STS, &status);
2702 udelay(1000);
2703 tlan_mii_read_reg(dev, phy, MII_GEN_STS, &status);
1da177e4 2704
c659c38b 2705 if (!(status & MII_GS_AUTOCMPLT)) {
1da177e4
LT		 2706 /* Wait for 8 sec to give the process
2707 * more time. Perhaps we should fail after a while.
2708 */
278e48b0 2709 tlan_set_timer(dev, 2 * HZ, TLAN_TIMER_PHY_FINISH_AN);
1da177e4
LT		 2710 return;
2711 }
2712
50624aab 2713 netdev_info(dev, "Autonegotiation complete\n");
c659c38b
SA		 2714 tlan_mii_read_reg(dev, phy, MII_AN_ADV, &an_adv);
2715 tlan_mii_read_reg(dev, phy, MII_AN_LPA, &an_lpa);
1da177e4 2716 mode = an_adv & an_lpa & 0x03E0;
c659c38b
SA		 2717 if (mode & 0x0100)
2718 priv->tlan_full_duplex = true;
2719 else if (!(mode & 0x0080) && (mode & 0x0040))
2720 priv->tlan_full_duplex = true;
2721
36bbe2f4 2722 /* switch to internal PHY for 10 Mbps */
c659c38b
SA		 2723 if ((!(mode & 0x0180)) &&
2724 (priv->adapter->flags & TLAN_ADAPTER_USE_INTERN_10) &&
2725 (priv->phy_num != 0)) {
2726 priv->phy_num = 0;
c659c38b 2727 tlan_set_timer(dev, (400*HZ/1000), TLAN_TIMER_PHY_PDOWN);
1da177e4
LT		 2728 return;
2729 }
2730
c659c38b
SA		 2731 if (priv->phy_num == 0) {
2732 if ((priv->duplex == TLAN_DUPLEX_FULL) ||
2733 (an_adv & an_lpa & 0x0040)) {
2734 tlan_mii_write_reg(dev, phy, MII_GEN_CTL,
2735 MII_GC_AUTOENB | MII_GC_DUPLEX);
50624aab 2736 netdev_info(dev, "Starting internal PHY with FULL-DUPLEX\n");
1da177e4 2737 } else {
c659c38b
SA		 2738 tlan_mii_write_reg(dev, phy, MII_GEN_CTL,
2739 MII_GC_AUTOENB);
50624aab 2740 netdev_info(dev, "Starting internal PHY with HALF-DUPLEX\n");
1da177e4
LT		 2741 }
2742 }
2743
2744 /* Wait for 100 ms. No reason in partiticular.
2745 */
c659c38b 2746 tlan_set_timer(dev, (HZ/10), TLAN_TIMER_FINISH_RESET);
6aa20a22 2747
c659c38b 2748}
1da177e4 2749
1da177e4 2750
c659c38b
SA		 2751/*********************************************************************
2752 *
2753 * tlan_phy_monitor
2754 *
2755 * Returns:
2756 * None
2757 *
2758 * Params:
c0a87c22 2759 * data The device structure of this device.
c659c38b
SA		 2760 *
2761 *
2762 * This function monitors PHY condition by reading the status
c0a87c22
OZ		 2763 * register via the MII bus, controls LINK LED and notifies the
2764 * kernel about link state.
c659c38b
SA		 2765 *
2766 *******************************************************************/
2767
c0a87c22 2768static void tlan_phy_monitor(unsigned long data)
1da177e4 2769{
c0a87c22 2770 struct net_device *dev = (struct net_device *) data;
c659c38b 2771 struct tlan_priv *priv = netdev_priv(dev);
1da177e4
LT		 2772 u16 phy;
2773 u16 phy_status;
2774
c659c38b 2775 phy = priv->phy[priv->phy_num];
1da177e4 2776
c659c38b
SA		 2777 /* Get PHY status register */
2778 tlan_mii_read_reg(dev, phy, MII_GEN_STS, &phy_status);
1da177e4 2779
c659c38b
SA		 2780 /* Check if link has been lost */
2781 if (!(phy_status & MII_GS_LINK)) {
c0a87c22 2782 if (netif_carrier_ok(dev)) {
c659c38b
SA		 2783 printk(KERN_DEBUG "TLAN: %s has lost link\n",
2784 dev->name);
c0a87c22 2785 tlan_dio_write8(dev->base_addr, TLAN_LED_REG, 0);
c659c38b 2786 netif_carrier_off(dev);
36bbe2f4
OZ		 2787 if (priv->adapter->flags & TLAN_ADAPTER_USE_INTERN_10) {
2788 /* power down internal PHY */
2789 u16 data = MII_GC_PDOWN | MII_GC_LOOPBK |
2790 MII_GC_ISOLATE;
2791
2792 tlan_mii_sync(dev->base_addr);
2793 tlan_mii_write_reg(dev, priv->phy[0],
2794 MII_GEN_CTL, data);
2795 /* set to external PHY */
2796 priv->phy_num = 1;
2797 /* restart autonegotiation */
2798 tlan_set_timer(dev, 4 * HZ / 10,
2799 TLAN_TIMER_PHY_PDOWN);
2800 return;
2801 }
1da177e4
LT		 2802 }
2803 }
2804
c659c38b 2805 /* Link restablished? */
c0a87c22
OZ		 2806 if ((phy_status & MII_GS_LINK) && !netif_carrier_ok(dev)) {
2807 tlan_dio_write8(dev->base_addr, TLAN_LED_REG, TLAN_LED_LINK);
c659c38b
SA		 2808 printk(KERN_DEBUG "TLAN: %s has reestablished link\n",
2809 dev->name);
7d17c1d6 2810 netif_carrier_on(dev);
c659c38b 2811 }
c0a87c22
OZ		 2812 priv->media_timer.expires = jiffies + HZ;
2813 add_timer(&priv->media_timer);
6aa20a22 2814}
1da177e4 2815
1da177e4
LT		 2816
2817/*****************************************************************************
2818******************************************************************************
2819
c659c38b 2820ThunderLAN driver MII routines
1da177e4 2821
c659c38b
SA		 2822these routines are based on the information in chap. 2 of the
2823"ThunderLAN Programmer's Guide", pp. 15-24.
1da177e4
LT		 2824
2825******************************************************************************
2826*****************************************************************************/
2827
2828
c659c38b
SA		 2829/***************************************************************
2830 * tlan_mii_read_reg
2831 *
2832 * Returns:
2833 * false if ack received ok
2834 * true if no ack received or other error
2835 *
2836 * Parms:
2837 * dev The device structure containing
2838 * The io address and interrupt count
2839 * for this device.
2840 * phy The address of the PHY to be queried.
2841 * reg The register whose contents are to be
2842 * retrieved.
2843 * val A pointer to a variable to store the
2844 * retrieved value.
2845 *
2846 * This function uses the TLAN's MII bus to retrieve the contents
2847 * of a given register on a PHY. It sends the appropriate info
2848 * and then reads the 16-bit register value from the MII bus via
2849 * the TLAN SIO register.
2850 *
2851 **************************************************************/
2852
2853static bool
2854tlan_mii_read_reg(struct net_device *dev, u16 phy, u16 reg, u16 *val)
1da177e4
LT		 2855{
2856 u8 nack;
2857 u16 sio, tmp;
c659c38b 2858 u32 i;
37fce430 2859 bool err;
1da177e4 2860 int minten;
c659c38b 2861 struct tlan_priv *priv = netdev_priv(dev);
1da177e4
LT		 2862 unsigned long flags = 0;
2863
37fce430 2864 err = false;
1da177e4
LT		 2865 outw(TLAN_NET_SIO, dev->base_addr + TLAN_DIO_ADR);
2866 sio = dev->base_addr + TLAN_DIO_DATA + TLAN_NET_SIO;
6aa20a22 2867
1da177e4
LT		 2868 if (!in_irq())
2869 spin_lock_irqsave(&priv->lock, flags);
2870
c659c38b 2871 tlan_mii_sync(dev->base_addr);
1da177e4 2872
c659c38b
SA		 2873 minten = tlan_get_bit(TLAN_NET_SIO_MINTEN, sio);
2874 if (minten)
2875 tlan_clear_bit(TLAN_NET_SIO_MINTEN, sio);
1da177e4 2876
c659c38b
SA		 2877 tlan_mii_send_data(dev->base_addr, 0x1, 2); /* start (01b) */
2878 tlan_mii_send_data(dev->base_addr, 0x2, 2); /* read (10b) */
2879 tlan_mii_send_data(dev->base_addr, phy, 5); /* device # */
2880 tlan_mii_send_data(dev->base_addr, reg, 5); /* register # */
1da177e4
LT		 2881
2882
c659c38b 2883 tlan_clear_bit(TLAN_NET_SIO_MTXEN, sio); /* change direction */
1da177e4 2884
c659c38b
SA		 2885 tlan_clear_bit(TLAN_NET_SIO_MCLK, sio); /* clock idle bit */
2886 tlan_set_bit(TLAN_NET_SIO_MCLK, sio);
2887 tlan_clear_bit(TLAN_NET_SIO_MCLK, sio); /* wait 300ns */
1da177e4 2888
c659c38b
SA		 2889 nack = tlan_get_bit(TLAN_NET_SIO_MDATA, sio); /* check for ACK */
2890 tlan_set_bit(TLAN_NET_SIO_MCLK, sio); /* finish ACK */
2891 if (nack) { /* no ACK, so fake it */
1da177e4 2892 for (i = 0; i < 16; i++) {
c659c38b
SA		 2893 tlan_clear_bit(TLAN_NET_SIO_MCLK, sio);
2894 tlan_set_bit(TLAN_NET_SIO_MCLK, sio);
1da177e4
LT		 2895 }
2896 tmp = 0xffff;
37fce430 2897 err = true;
1da177e4
LT		 2898 } else { /* ACK, so read data */
2899 for (tmp = 0, i = 0x8000; i; i >>= 1) {
c659c38b
SA		 2900 tlan_clear_bit(TLAN_NET_SIO_MCLK, sio);
2901 if (tlan_get_bit(TLAN_NET_SIO_MDATA, sio))
1da177e4 2902 tmp |= i;
c659c38b 2903 tlan_set_bit(TLAN_NET_SIO_MCLK, sio);
1da177e4
LT		 2904 }
2905 }
2906
2907
c659c38b
SA		 2908 tlan_clear_bit(TLAN_NET_SIO_MCLK, sio); /* idle cycle */
2909 tlan_set_bit(TLAN_NET_SIO_MCLK, sio);
1da177e4 2910
c659c38b
SA		 2911 if (minten)
2912 tlan_set_bit(TLAN_NET_SIO_MINTEN, sio);
1da177e4
LT		 2913
2914 *val = tmp;
6aa20a22 2915
1da177e4
LT		 2916 if (!in_irq())
2917 spin_unlock_irqrestore(&priv->lock, flags);
2918
2919 return err;
2920
c659c38b 2921}
1da177e4
LT		 2922
2923
2924
2925
c659c38b
SA		 2926/***************************************************************
2927 * tlan_mii_send_data
2928 *
2929 * Returns:
2930 * Nothing
2931 * Parms:
2932 * base_port The base IO port of the adapter in
2933 * question.
2934 * dev The address of the PHY to be queried.
2935 * data The value to be placed on the MII bus.
2936 * num_bits The number of bits in data that are to
2937 * be placed on the MII bus.
2938 *
2939 * This function sends on sequence of bits on the MII
2940 * configuration bus.
2941 *
2942 **************************************************************/
1da177e4 2943
c659c38b 2944static void tlan_mii_send_data(u16 base_port, u32 data, unsigned num_bits)
1da177e4
LT		 2945{
2946 u16 sio;
2947 u32 i;
2948
c659c38b 2949 if (num_bits == 0)
1da177e4
LT		 2950 return;
2951
c659c38b 2952 outw(TLAN_NET_SIO, base_port + TLAN_DIO_ADR);
1da177e4 2953 sio = base_port + TLAN_DIO_DATA + TLAN_NET_SIO;
c659c38b 2954 tlan_set_bit(TLAN_NET_SIO_MTXEN, sio);
1da177e4 2955
c659c38b
SA		 2956 for (i = (0x1 << (num_bits - 1)); i; i >>= 1) {
2957 tlan_clear_bit(TLAN_NET_SIO_MCLK, sio);
2958 (void) tlan_get_bit(TLAN_NET_SIO_MCLK, sio);
2959 if (data & i)
2960 tlan_set_bit(TLAN_NET_SIO_MDATA, sio);
1da177e4 2961 else
c659c38b
SA		 2962 tlan_clear_bit(TLAN_NET_SIO_MDATA, sio);
2963 tlan_set_bit(TLAN_NET_SIO_MCLK, sio);
2964 (void) tlan_get_bit(TLAN_NET_SIO_MCLK, sio);
1da177e4
LT		 2965 }
2966
c659c38b 2967}
1da177e4
LT		 2968
2969
2970
2971
c659c38b
SA		 2972/***************************************************************
2973 * TLan_MiiSync
2974 *
2975 * Returns:
2976 * Nothing
2977 * Parms:
2978 * base_port The base IO port of the adapter in
2979 * question.
2980 *
2981 * This functions syncs all PHYs in terms of the MII configuration
2982 * bus.
2983 *
2984 **************************************************************/
1da177e4 2985
c659c38b 2986static void tlan_mii_sync(u16 base_port)
1da177e4
LT		 2987{
2988 int i;
2989 u16 sio;
2990
c659c38b 2991 outw(TLAN_NET_SIO, base_port + TLAN_DIO_ADR);
1da177e4
LT		 2992 sio = base_port + TLAN_DIO_DATA + TLAN_NET_SIO;
2993
c659c38b
SA		 2994 tlan_clear_bit(TLAN_NET_SIO_MTXEN, sio);
2995 for (i = 0; i < 32; i++) {
2996 tlan_clear_bit(TLAN_NET_SIO_MCLK, sio);
2997 tlan_set_bit(TLAN_NET_SIO_MCLK, sio);
1da177e4
LT		 2998 }
2999
c659c38b 3000}
1da177e4
LT		 3001
3002
3003
3004
c659c38b
SA		 3005/***************************************************************
3006 * tlan_mii_write_reg
3007 *
3008 * Returns:
3009 * Nothing
3010 * Parms:
3011 * dev The device structure for the device
3012 * to write to.
3013 * phy The address of the PHY to be written to.
3014 * reg The register whose contents are to be
3015 * written.
3016 * val The value to be written to the register.
3017 *
3018 * This function uses the TLAN's MII bus to write the contents of a
3019 * given register on a PHY. It sends the appropriate info and then
3020 * writes the 16-bit register value from the MII configuration bus
3021 * via the TLAN SIO register.
3022 *
3023 **************************************************************/
1da177e4 3024
c659c38b
SA		 3025static void
3026tlan_mii_write_reg(struct net_device *dev, u16 phy, u16 reg, u16 val)
1da177e4
LT		 3027{
3028 u16 sio;
3029 int minten;
3030 unsigned long flags = 0;
c659c38b 3031 struct tlan_priv *priv = netdev_priv(dev);
1da177e4
LT		 3032
3033 outw(TLAN_NET_SIO, dev->base_addr + TLAN_DIO_ADR);
3034 sio = dev->base_addr + TLAN_DIO_DATA + TLAN_NET_SIO;
6aa20a22 3035
1da177e4
LT		 3036 if (!in_irq())
3037 spin_lock_irqsave(&priv->lock, flags);
3038
c659c38b 3039 tlan_mii_sync(dev->base_addr);
1da177e4 3040
c659c38b
SA		 3041 minten = tlan_get_bit(TLAN_NET_SIO_MINTEN, sio);
3042 if (minten)
3043 tlan_clear_bit(TLAN_NET_SIO_MINTEN, sio);
1da177e4 3044
c659c38b
SA		 3045 tlan_mii_send_data(dev->base_addr, 0x1, 2); /* start (01b) */
3046 tlan_mii_send_data(dev->base_addr, 0x1, 2); /* write (01b) */
3047 tlan_mii_send_data(dev->base_addr, phy, 5); /* device # */
3048 tlan_mii_send_data(dev->base_addr, reg, 5); /* register # */
1da177e4 3049
c659c38b
SA		 3050 tlan_mii_send_data(dev->base_addr, 0x2, 2); /* send ACK */
3051 tlan_mii_send_data(dev->base_addr, val, 16); /* send data */
1da177e4 3052
c659c38b
SA		 3053 tlan_clear_bit(TLAN_NET_SIO_MCLK, sio); /* idle cycle */
3054 tlan_set_bit(TLAN_NET_SIO_MCLK, sio);
1da177e4 3055
c659c38b
SA		 3056 if (minten)
3057 tlan_set_bit(TLAN_NET_SIO_MINTEN, sio);
6aa20a22 3058
1da177e4
LT		 3059 if (!in_irq())
3060 spin_unlock_irqrestore(&priv->lock, flags);
3061
c659c38b 3062}
1da177e4
LT		 3063
3064
3065
3066
3067/*****************************************************************************
3068******************************************************************************
3069
c659c38b 3070ThunderLAN driver eeprom routines
1da177e4 3071
c659c38b
SA		 3072the Compaq netelligent 10 and 10/100 cards use a microchip 24C02A
3073EEPROM. these functions are based on information in microchip's
3074data sheet. I don't know how well this functions will work with
3075other Eeproms.
1da177e4
LT		 3076
3077******************************************************************************
3078*****************************************************************************/
3079
3080
c659c38b
SA		 3081/***************************************************************
3082 * tlan_ee_send_start
3083 *
3084 * Returns:
3085 * Nothing
3086 * Parms:
3087 * io_base The IO port base address for the
3088 * TLAN device with the EEPROM to
3089 * use.
3090 *
3091 * This function sends a start cycle to an EEPROM attached
3092 * to a TLAN chip.
3093 *
3094 **************************************************************/
3095
3096static void tlan_ee_send_start(u16 io_base)
1da177e4
LT		 3097{
3098 u16 sio;
3099
c659c38b 3100 outw(TLAN_NET_SIO, io_base + TLAN_DIO_ADR);
1da177e4
LT		 3101 sio = io_base + TLAN_DIO_DATA + TLAN_NET_SIO;
3102
c659c38b
SA		 3103 tlan_set_bit(TLAN_NET_SIO_ECLOK, sio);
3104 tlan_set_bit(TLAN_NET_SIO_EDATA, sio);
3105 tlan_set_bit(TLAN_NET_SIO_ETXEN, sio);
3106 tlan_clear_bit(TLAN_NET_SIO_EDATA, sio);
3107 tlan_clear_bit(TLAN_NET_SIO_ECLOK, sio);
3108
3109}
3110
3111
3112
3113
3114/***************************************************************
3115 * tlan_ee_send_byte
3116 *
3117 * Returns:
3118 * If the correct ack was received, 0, otherwise 1
3119 * Parms: io_base The IO port base address for the
3120 * TLAN device with the EEPROM to
3121 * use.
3122 * data The 8 bits of information to
3123 * send to the EEPROM.
3124 * stop If TLAN_EEPROM_STOP is passed, a
3125 * stop cycle is sent after the
3126 * byte is sent after the ack is
3127 * read.
3128 *
3129 * This function sends a byte on the serial EEPROM line,
3130 * driving the clock to send each bit. The function then
3131 * reverses transmission direction and reads an acknowledge
3132 * bit.
3133 *
3134 **************************************************************/
3135
3136static int tlan_ee_send_byte(u16 io_base, u8 data, int stop)
1da177e4
LT		 3137{
3138 int err;
3139 u8 place;
3140 u16 sio;
3141
c659c38b 3142 outw(TLAN_NET_SIO, io_base + TLAN_DIO_ADR);
1da177e4
LT		 3143 sio = io_base + TLAN_DIO_DATA + TLAN_NET_SIO;
3144
3145 /* Assume clock is low, tx is enabled; */
c659c38b
SA		 3146 for (place = 0x80; place != 0; place >>= 1) {
3147 if (place & data)
3148 tlan_set_bit(TLAN_NET_SIO_EDATA, sio);
1da177e4 3149 else
c659c38b
SA		 3150 tlan_clear_bit(TLAN_NET_SIO_EDATA, sio);
3151 tlan_set_bit(TLAN_NET_SIO_ECLOK, sio);
3152 tlan_clear_bit(TLAN_NET_SIO_ECLOK, sio);
1da177e4 3153 }
c659c38b
SA		 3154 tlan_clear_bit(TLAN_NET_SIO_ETXEN, sio);
3155 tlan_set_bit(TLAN_NET_SIO_ECLOK, sio);
3156 err = tlan_get_bit(TLAN_NET_SIO_EDATA, sio);
3157 tlan_clear_bit(TLAN_NET_SIO_ECLOK, sio);
3158 tlan_set_bit(TLAN_NET_SIO_ETXEN, sio);
1da177e4 3159
c659c38b 3160 if ((!err) && stop) {
dfc2c0a6 3161 /* STOP, raise data while clock is high */
c659c38b
SA		 3162 tlan_clear_bit(TLAN_NET_SIO_EDATA, sio);
3163 tlan_set_bit(TLAN_NET_SIO_ECLOK, sio);
3164 tlan_set_bit(TLAN_NET_SIO_EDATA, sio);
1da177e4
LT		 3165 }
3166
807540ba 3167 return err;
1da177e4 3168
c659c38b
SA		 3169}
3170
3171
3172
3173
3174/***************************************************************
3175 * tlan_ee_receive_byte
3176 *
3177 * Returns:
3178 * Nothing
3179 * Parms:
3180 * io_base The IO port base address for the
3181 * TLAN device with the EEPROM to
3182 * use.
3183 * data An address to a char to hold the
3184 * data sent from the EEPROM.
3185 * stop If TLAN_EEPROM_STOP is passed, a
3186 * stop cycle is sent after the
3187 * byte is received, and no ack is
3188 * sent.
3189 *
3190 * This function receives 8 bits of data from the EEPROM
3191 * over the serial link. It then sends and ack bit, or no
3192 * ack and a stop bit. This function is used to retrieve
3193 * data after the address of a byte in the EEPROM has been
3194 * sent.
3195 *
3196 **************************************************************/
3197
3198static void tlan_ee_receive_byte(u16 io_base, u8 *data, int stop)
1da177e4
LT		 3199{
3200 u8 place;
3201 u16 sio;
3202
c659c38b 3203 outw(TLAN_NET_SIO, io_base + TLAN_DIO_ADR);
1da177e4
LT		 3204 sio = io_base + TLAN_DIO_DATA + TLAN_NET_SIO;
3205 *data = 0;
3206
3207 /* Assume clock is low, tx is enabled; */
c659c38b
SA		 3208 tlan_clear_bit(TLAN_NET_SIO_ETXEN, sio);
3209 for (place = 0x80; place; place >>= 1) {
3210 tlan_set_bit(TLAN_NET_SIO_ECLOK, sio);
3211 if (tlan_get_bit(TLAN_NET_SIO_EDATA, sio))
1da177e4 3212 *data |= place;
c659c38b 3213 tlan_clear_bit(TLAN_NET_SIO_ECLOK, sio);
1da177e4
LT		 3214 }
3215
c659c38b
SA		 3216 tlan_set_bit(TLAN_NET_SIO_ETXEN, sio);
3217 if (!stop) {
3218 tlan_clear_bit(TLAN_NET_SIO_EDATA, sio); /* ack = 0 */
3219 tlan_set_bit(TLAN_NET_SIO_ECLOK, sio);
3220 tlan_clear_bit(TLAN_NET_SIO_ECLOK, sio);
1da177e4 3221 } else {
c659c38b
SA		 3222 tlan_set_bit(TLAN_NET_SIO_EDATA, sio); /* no ack = 1 (?) */
3223 tlan_set_bit(TLAN_NET_SIO_ECLOK, sio);
3224 tlan_clear_bit(TLAN_NET_SIO_ECLOK, sio);
dfc2c0a6 3225 /* STOP, raise data while clock is high */
c659c38b
SA		 3226 tlan_clear_bit(TLAN_NET_SIO_EDATA, sio);
3227 tlan_set_bit(TLAN_NET_SIO_ECLOK, sio);
3228 tlan_set_bit(TLAN_NET_SIO_EDATA, sio);
3229 }
3230
3231}
3232
3233
3234
3235
3236/***************************************************************
3237 * tlan_ee_read_byte
3238 *
3239 * Returns:
3240 * No error = 0, else, the stage at which the error
3241 * occurred.
3242 * Parms:
3243 * io_base The IO port base address for the
3244 * TLAN device with the EEPROM to
3245 * use.
3246 * ee_addr The address of the byte in the
3247 * EEPROM whose contents are to be
3248 * retrieved.
3249 * data An address to a char to hold the
3250 * data obtained from the EEPROM.
3251 *
3252 * This function reads a byte of information from an byte
3253 * cell in the EEPROM.
3254 *
3255 **************************************************************/
3256
3257static int tlan_ee_read_byte(struct net_device *dev, u8 ee_addr, u8 *data)
1da177e4
LT		 3258{
3259 int err;
c659c38b 3260 struct tlan_priv *priv = netdev_priv(dev);
1da177e4 3261 unsigned long flags = 0;
c659c38b 3262 int ret = 0;
1da177e4
LT		 3263
3264 spin_lock_irqsave(&priv->lock, flags);
3265
c659c38b
SA		 3266 tlan_ee_send_start(dev->base_addr);
3267 err = tlan_ee_send_byte(dev->base_addr, 0xa0, TLAN_EEPROM_ACK);
3268 if (err) {
3269 ret = 1;
1da177e4
LT		 3270 goto fail;
3271 }
c659c38b
SA		 3272 err = tlan_ee_send_byte(dev->base_addr, ee_addr, TLAN_EEPROM_ACK);
3273 if (err) {
3274 ret = 2;
1da177e4
LT		 3275 goto fail;
3276 }
c659c38b
SA		 3277 tlan_ee_send_start(dev->base_addr);
3278 err = tlan_ee_send_byte(dev->base_addr, 0xa1, TLAN_EEPROM_ACK);
3279 if (err) {
3280 ret = 3;
1da177e4
LT		 3281 goto fail;
3282 }
c659c38b 3283 tlan_ee_receive_byte(dev->base_addr, data, TLAN_EEPROM_STOP);
1da177e4
LT		 3284fail:
3285 spin_unlock_irqrestore(&priv->lock, flags);
3286
3287 return ret;
3288
c659c38b 3289}
1da177e4
LT		 3290
3291
3292
Linux kernel - Deliverables
This page took 1.544598 seconds and 5 git commands to generate.