Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* [xirc2ps_cs.c wk 03.11.99] (1.40 1999/11/18 00:06:03) |
2 | * Xircom CreditCard Ethernet Adapter IIps driver | |
3 | * Xircom Realport 10/100 (RE-100) driver | |
4 | * | |
5 | * This driver supports various Xircom CreditCard Ethernet adapters | |
6 | * including the CE2, CE IIps, RE-10, CEM28, CEM33, CE33, CEM56, | |
7 | * CE3-100, CE3B, RE-100, REM10BT, and REM56G-100. | |
8 | * | |
9 | * 2000-09-24 <psheer@icon.co.za> The Xircom CE3B-100 may not | |
10 | * autodetect the media properly. In this case use the | |
11 | * if_port=1 (for 10BaseT) or if_port=4 (for 100BaseT) options | |
12 | * to force the media type. | |
13 | * | |
14 | * Written originally by Werner Koch based on David Hinds' skeleton of the | |
15 | * PCMCIA driver. | |
16 | * | |
17 | * Copyright (c) 1997,1998 Werner Koch (dd9jn) | |
18 | * | |
19 | * This driver is free software; you can redistribute it and/or modify | |
20 | * it under the terms of the GNU General Public License as published by | |
21 | * the Free Software Foundation; either version 2 of the License, or | |
22 | * (at your option) any later version. | |
23 | * | |
24 | * It is distributed in the hope that it will be useful, | |
25 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
26 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
27 | * GNU General Public License for more details. | |
28 | * | |
29 | * You should have received a copy of the GNU General Public License | |
0ab75ae8 | 30 | * along with this program; if not, see <http://www.gnu.org/licenses/>. |
1da177e4 LT |
31 | * |
32 | * | |
33 | * ALTERNATIVELY, this driver may be distributed under the terms of | |
34 | * the following license, in which case the provisions of this license | |
35 | * are required INSTEAD OF the GNU General Public License. (This clause | |
36 | * is necessary due to a potential bad interaction between the GPL and | |
37 | * the restrictions contained in a BSD-style copyright.) | |
38 | * | |
39 | * Redistribution and use in source and binary forms, with or without | |
40 | * modification, are permitted provided that the following conditions | |
41 | * are met: | |
42 | * 1. Redistributions of source code must retain the above copyright | |
43 | * notice, and the entire permission notice in its entirety, | |
44 | * including the disclaimer of warranties. | |
45 | * 2. Redistributions in binary form must reproduce the above copyright | |
46 | * notice, this list of conditions and the following disclaimer in the | |
47 | * documentation and/or other materials provided with the distribution. | |
48 | * 3. The name of the author may not be used to endorse or promote | |
49 | * products derived from this software without specific prior | |
50 | * written permission. | |
51 | * | |
52 | * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED | |
53 | * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES | |
54 | * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE | |
55 | * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, | |
56 | * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES | |
57 | * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR | |
58 | * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) | |
59 | * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, | |
60 | * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) | |
61 | * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED | |
62 | * OF THE POSSIBILITY OF SUCH DAMAGE. | |
63 | */ | |
64 | ||
636b8116 JP |
65 | #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
66 | ||
1da177e4 LT |
67 | #include <linux/module.h> |
68 | #include <linux/kernel.h> | |
69 | #include <linux/init.h> | |
70 | #include <linux/ptrace.h> | |
71 | #include <linux/slab.h> | |
72 | #include <linux/string.h> | |
73 | #include <linux/timer.h> | |
74 | #include <linux/interrupt.h> | |
75 | #include <linux/in.h> | |
76 | #include <linux/delay.h> | |
77 | #include <linux/ethtool.h> | |
78 | #include <linux/netdevice.h> | |
79 | #include <linux/etherdevice.h> | |
80 | #include <linux/skbuff.h> | |
81 | #include <linux/if_arp.h> | |
82 | #include <linux/ioport.h> | |
83 | #include <linux/bitops.h> | |
0fa0ee05 | 84 | #include <linux/mii.h> |
1da177e4 | 85 | |
1da177e4 LT |
86 | #include <pcmcia/cistpl.h> |
87 | #include <pcmcia/cisreg.h> | |
88 | #include <pcmcia/ciscode.h> | |
89 | ||
90 | #include <asm/io.h> | |
1da177e4 LT |
91 | #include <asm/uaccess.h> |
92 | ||
93 | #ifndef MANFID_COMPAQ | |
94 | #define MANFID_COMPAQ 0x0138 | |
95 | #define MANFID_COMPAQ2 0x0183 /* is this correct? */ | |
96 | #endif | |
97 | ||
98 | #include <pcmcia/ds.h> | |
99 | ||
100 | /* Time in jiffies before concluding Tx hung */ | |
101 | #define TX_TIMEOUT ((400*HZ)/1000) | |
102 | ||
103 | /**************** | |
104 | * Some constants used to access the hardware | |
105 | */ | |
106 | ||
107 | /* Register offsets and value constans */ | |
108 | #define XIRCREG_CR 0 /* Command register (wr) */ | |
109 | enum xirc_cr { | |
110 | TransmitPacket = 0x01, | |
111 | SoftReset = 0x02, | |
112 | EnableIntr = 0x04, | |
113 | ForceIntr = 0x08, | |
114 | ClearTxFIFO = 0x10, | |
115 | ClearRxOvrun = 0x20, | |
116 | RestartTx = 0x40 | |
117 | }; | |
118 | #define XIRCREG_ESR 0 /* Ethernet status register (rd) */ | |
119 | enum xirc_esr { | |
120 | FullPktRcvd = 0x01, /* full packet in receive buffer */ | |
121 | PktRejected = 0x04, /* a packet has been rejected */ | |
122 | TxPktPend = 0x08, /* TX Packet Pending */ | |
123 | IncorPolarity = 0x10, | |
124 | MediaSelect = 0x20 /* set if TP, clear if AUI */ | |
125 | }; | |
126 | #define XIRCREG_PR 1 /* Page Register select */ | |
127 | #define XIRCREG_EDP 4 /* Ethernet Data Port Register */ | |
128 | #define XIRCREG_ISR 6 /* Ethernet Interrupt Status Register */ | |
129 | enum xirc_isr { | |
130 | TxBufOvr = 0x01, /* TX Buffer Overflow */ | |
131 | PktTxed = 0x02, /* Packet Transmitted */ | |
132 | MACIntr = 0x04, /* MAC Interrupt occurred */ | |
133 | TxResGrant = 0x08, /* Tx Reservation Granted */ | |
134 | RxFullPkt = 0x20, /* Rx Full Packet */ | |
135 | RxPktRej = 0x40, /* Rx Packet Rejected */ | |
136 | ForcedIntr= 0x80 /* Forced Interrupt */ | |
137 | }; | |
138 | #define XIRCREG1_IMR0 12 /* Ethernet Interrupt Mask Register (on page 1)*/ | |
139 | #define XIRCREG1_IMR1 13 | |
140 | #define XIRCREG0_TSO 8 /* Transmit Space Open Register (on page 0)*/ | |
141 | #define XIRCREG0_TRS 10 /* Transmit reservation Size Register (page 0)*/ | |
142 | #define XIRCREG0_DO 12 /* Data Offset Register (page 0) (wr) */ | |
143 | #define XIRCREG0_RSR 12 /* Receive Status Register (page 0) (rd) */ | |
144 | enum xirc_rsr { | |
145 | PhyPkt = 0x01, /* set:physical packet, clear: multicast packet */ | |
146 | BrdcstPkt = 0x02, /* set if it is a broadcast packet */ | |
147 | PktTooLong = 0x04, /* set if packet length > 1518 */ | |
148 | AlignErr = 0x10, /* incorrect CRC and last octet not complete */ | |
149 | CRCErr = 0x20, /* incorrect CRC and last octet is complete */ | |
150 | PktRxOk = 0x80 /* received ok */ | |
151 | }; | |
152 | #define XIRCREG0_PTR 13 /* packets transmitted register (rd) */ | |
153 | #define XIRCREG0_RBC 14 /* receive byte count regsister (rd) */ | |
154 | #define XIRCREG1_ECR 14 /* ethernet configurationn register */ | |
155 | enum xirc_ecr { | |
156 | FullDuplex = 0x04, /* enable full duplex mode */ | |
157 | LongTPMode = 0x08, /* adjust for longer lengths of TP cable */ | |
158 | DisablePolCor = 0x10,/* disable auto polarity correction */ | |
159 | DisableLinkPulse = 0x20, /* disable link pulse generation */ | |
160 | DisableAutoTx = 0x40, /* disable auto-transmit */ | |
161 | }; | |
162 | #define XIRCREG2_RBS 8 /* receive buffer start register */ | |
163 | #define XIRCREG2_LED 10 /* LED Configuration register */ | |
164 | /* values for the leds: Bits 2-0 for led 1 | |
165 | * 0 disabled Bits 5-3 for led 2 | |
166 | * 1 collision | |
167 | * 2 noncollision | |
168 | * 3 link_detected | |
169 | * 4 incor_polarity | |
170 | * 5 jabber | |
171 | * 6 auto_assertion | |
172 | * 7 rx_tx_activity | |
173 | */ | |
174 | #define XIRCREG2_MSR 12 /* Mohawk specific register */ | |
175 | ||
176 | #define XIRCREG4_GPR0 8 /* General Purpose Register 0 */ | |
177 | #define XIRCREG4_GPR1 9 /* General Purpose Register 1 */ | |
178 | #define XIRCREG2_GPR2 13 /* General Purpose Register 2 (page2!)*/ | |
179 | #define XIRCREG4_BOV 10 /* Bonding Version Register */ | |
180 | #define XIRCREG4_LMA 12 /* Local Memory Address Register */ | |
181 | #define XIRCREG4_LMD 14 /* Local Memory Data Port */ | |
182 | /* MAC register can only by accessed with 8 bit operations */ | |
183 | #define XIRCREG40_CMD0 8 /* Command Register (wr) */ | |
184 | enum xirc_cmd { /* Commands */ | |
185 | Transmit = 0x01, | |
186 | EnableRecv = 0x04, | |
187 | DisableRecv = 0x08, | |
188 | Abort = 0x10, | |
189 | Online = 0x20, | |
190 | IntrAck = 0x40, | |
191 | Offline = 0x80 | |
192 | }; | |
193 | #define XIRCREG5_RHSA0 10 /* Rx Host Start Address */ | |
194 | #define XIRCREG40_RXST0 9 /* Receive Status Register */ | |
195 | #define XIRCREG40_TXST0 11 /* Transmit Status Register 0 */ | |
196 | #define XIRCREG40_TXST1 12 /* Transmit Status Register 10 */ | |
197 | #define XIRCREG40_RMASK0 13 /* Receive Mask Register */ | |
198 | #define XIRCREG40_TMASK0 14 /* Transmit Mask Register 0 */ | |
199 | #define XIRCREG40_TMASK1 15 /* Transmit Mask Register 0 */ | |
200 | #define XIRCREG42_SWC0 8 /* Software Configuration 0 */ | |
201 | #define XIRCREG42_SWC1 9 /* Software Configuration 1 */ | |
202 | #define XIRCREG42_BOC 10 /* Back-Off Configuration */ | |
203 | #define XIRCREG44_TDR0 8 /* Time Domain Reflectometry 0 */ | |
204 | #define XIRCREG44_TDR1 9 /* Time Domain Reflectometry 1 */ | |
205 | #define XIRCREG44_RXBC_LO 10 /* Rx Byte Count 0 (rd) */ | |
206 | #define XIRCREG44_RXBC_HI 11 /* Rx Byte Count 1 (rd) */ | |
207 | #define XIRCREG45_REV 15 /* Revision Register (rd) */ | |
208 | #define XIRCREG50_IA 8 /* Individual Address (8-13) */ | |
209 | ||
f71e1309 | 210 | static const char *if_names[] = { "Auto", "10BaseT", "10Base2", "AUI", "100BaseT" }; |
1da177e4 | 211 | |
1da177e4 LT |
212 | /* card types */ |
213 | #define XIR_UNKNOWN 0 /* unknown: not supported */ | |
214 | #define XIR_CE 1 /* (prodid 1) different hardware: not supported */ | |
215 | #define XIR_CE2 2 /* (prodid 2) */ | |
216 | #define XIR_CE3 3 /* (prodid 3) */ | |
217 | #define XIR_CEM 4 /* (prodid 1) different hardware: not supported */ | |
218 | #define XIR_CEM2 5 /* (prodid 2) */ | |
219 | #define XIR_CEM3 6 /* (prodid 3) */ | |
220 | #define XIR_CEM33 7 /* (prodid 4) */ | |
221 | #define XIR_CEM56M 8 /* (prodid 5) */ | |
222 | #define XIR_CEM56 9 /* (prodid 6) */ | |
223 | #define XIR_CM28 10 /* (prodid 3) modem only: not supported here */ | |
224 | #define XIR_CM33 11 /* (prodid 4) modem only: not supported here */ | |
225 | #define XIR_CM56 12 /* (prodid 5) modem only: not supported here */ | |
226 | #define XIR_CG 13 /* (prodid 1) GSM modem only: not supported */ | |
227 | #define XIR_CBE 14 /* (prodid 1) cardbus ethernet: not supported */ | |
228 | /*====================================================================*/ | |
229 | ||
230 | /* Module parameters */ | |
231 | ||
232 | MODULE_DESCRIPTION("Xircom PCMCIA ethernet driver"); | |
233 | MODULE_LICENSE("Dual MPL/GPL"); | |
234 | ||
235 | #define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0) | |
236 | ||
237 | INT_MODULE_PARM(if_port, 0); | |
238 | INT_MODULE_PARM(full_duplex, 0); | |
239 | INT_MODULE_PARM(do_sound, 1); | |
240 | INT_MODULE_PARM(lockup_hack, 0); /* anti lockup hack */ | |
241 | ||
242 | /*====================================================================*/ | |
243 | ||
244 | /* We do not process more than these number of bytes during one | |
245 | * interrupt. (Of course we receive complete packets, so this is not | |
246 | * an exact value). | |
247 | * Something between 2000..22000; first value gives best interrupt latency, | |
248 | * the second enables the usage of the complete on-chip buffer. We use the | |
249 | * high value as the initial value. | |
250 | */ | |
251 | static unsigned maxrx_bytes = 22000; | |
252 | ||
253 | /* MII management prototypes */ | |
906da809 OJ |
254 | static void mii_idle(unsigned int ioaddr); |
255 | static void mii_putbit(unsigned int ioaddr, unsigned data); | |
256 | static int mii_getbit(unsigned int ioaddr); | |
257 | static void mii_wbits(unsigned int ioaddr, unsigned data, int len); | |
258 | static unsigned mii_rd(unsigned int ioaddr, u_char phyaddr, u_char phyreg); | |
259 | static void mii_wr(unsigned int ioaddr, u_char phyaddr, u_char phyreg, | |
1da177e4 LT |
260 | unsigned data, int len); |
261 | ||
fba395ee | 262 | static int has_ce2_string(struct pcmcia_device * link); |
15b99ac1 | 263 | static int xirc2ps_config(struct pcmcia_device * link); |
fba395ee | 264 | static void xirc2ps_release(struct pcmcia_device * link); |
cc3b4866 | 265 | static void xirc2ps_detach(struct pcmcia_device *p_dev); |
1da177e4 | 266 | |
7d12e780 | 267 | static irqreturn_t xirc2ps_interrupt(int irq, void *dev_id); |
1da177e4 | 268 | |
f8653464 | 269 | struct local_info { |
c4028958 | 270 | struct net_device *dev; |
fd238232 | 271 | struct pcmcia_device *p_dev; |
6394d7c9 | 272 | |
1da177e4 LT |
273 | int card_type; |
274 | int probe_port; | |
275 | int silicon; /* silicon revision. 0=old CE2, 1=Scipper, 4=Mohawk */ | |
276 | int mohawk; /* a CE3 type card */ | |
277 | int dingo; /* a CEM56 type card */ | |
278 | int new_mii; /* has full 10baseT/100baseT MII */ | |
279 | int modem; /* is a multi function card (i.e with a modem) */ | |
280 | void __iomem *dingo_ccr; /* only used for CEM56 cards */ | |
281 | unsigned last_ptr_value; /* last packets transmitted value */ | |
282 | const char *manf_str; | |
9a469abe | 283 | struct work_struct tx_timeout_task; |
f8653464 | 284 | }; |
1da177e4 LT |
285 | |
286 | /**************** | |
287 | * Some more prototypes | |
288 | */ | |
dbf02fae SH |
289 | static netdev_tx_t do_start_xmit(struct sk_buff *skb, |
290 | struct net_device *dev); | |
ed4cb133 | 291 | static void xirc_tx_timeout(struct net_device *dev); |
c4028958 | 292 | static void xirc2ps_tx_timeout_task(struct work_struct *work); |
1da177e4 LT |
293 | static void set_addresses(struct net_device *dev); |
294 | static void set_multicast_list(struct net_device *dev); | |
dddfbd82 | 295 | static int set_card_type(struct pcmcia_device *link); |
1da177e4 LT |
296 | static int do_config(struct net_device *dev, struct ifmap *map); |
297 | static int do_open(struct net_device *dev); | |
298 | static int do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); | |
7282d491 | 299 | static const struct ethtool_ops netdev_ethtool_ops; |
1da177e4 LT |
300 | static void hardreset(struct net_device *dev); |
301 | static void do_reset(struct net_device *dev, int full); | |
302 | static int init_mii(struct net_device *dev); | |
303 | static void do_powerdown(struct net_device *dev); | |
304 | static int do_stop(struct net_device *dev); | |
305 | ||
306 | /*=============== Helper functions =========================*/ | |
1da177e4 LT |
307 | #define SelectPage(pgnr) outb((pgnr), ioaddr + XIRCREG_PR) |
308 | #define GetByte(reg) ((unsigned)inb(ioaddr + (reg))) | |
309 | #define GetWord(reg) ((unsigned)inw(ioaddr + (reg))) | |
310 | #define PutByte(reg,value) outb((value), ioaddr+(reg)) | |
311 | #define PutWord(reg,value) outw((value), ioaddr+(reg)) | |
312 | ||
313 | /*====== Functions used for debugging =================================*/ | |
dd0fab5b | 314 | #if 0 /* reading regs may change system status */ |
1da177e4 LT |
315 | static void |
316 | PrintRegisters(struct net_device *dev) | |
317 | { | |
906da809 | 318 | unsigned int ioaddr = dev->base_addr; |
1da177e4 LT |
319 | |
320 | if (pc_debug > 1) { | |
321 | int i, page; | |
322 | ||
636b8116 | 323 | printk(KERN_DEBUG pr_fmt("Register common: ")); |
1da177e4 | 324 | for (i = 0; i < 8; i++) |
636b8116 JP |
325 | pr_cont(" %2.2x", GetByte(i)); |
326 | pr_cont("\n"); | |
1da177e4 | 327 | for (page = 0; page <= 8; page++) { |
636b8116 | 328 | printk(KERN_DEBUG pr_fmt("Register page %2x: "), page); |
1da177e4 LT |
329 | SelectPage(page); |
330 | for (i = 8; i < 16; i++) | |
636b8116 JP |
331 | pr_cont(" %2.2x", GetByte(i)); |
332 | pr_cont("\n"); | |
1da177e4 LT |
333 | } |
334 | for (page=0x40 ; page <= 0x5f; page++) { | |
8e95a202 JP |
335 | if (page == 0x43 || (page >= 0x46 && page <= 0x4f) || |
336 | (page >= 0x51 && page <=0x5e)) | |
337 | continue; | |
636b8116 | 338 | printk(KERN_DEBUG pr_fmt("Register page %2x: "), page); |
1da177e4 LT |
339 | SelectPage(page); |
340 | for (i = 8; i < 16; i++) | |
636b8116 JP |
341 | pr_cont(" %2.2x", GetByte(i)); |
342 | pr_cont("\n"); | |
1da177e4 LT |
343 | } |
344 | } | |
345 | } | |
dd0fab5b | 346 | #endif /* 0 */ |
1da177e4 LT |
347 | |
348 | /*============== MII Management functions ===============*/ | |
349 | ||
350 | /**************** | |
351 | * Turn around for read | |
352 | */ | |
353 | static void | |
906da809 | 354 | mii_idle(unsigned int ioaddr) |
1da177e4 LT |
355 | { |
356 | PutByte(XIRCREG2_GPR2, 0x04|0); /* drive MDCK low */ | |
357 | udelay(1); | |
358 | PutByte(XIRCREG2_GPR2, 0x04|1); /* and drive MDCK high */ | |
359 | udelay(1); | |
360 | } | |
361 | ||
362 | /**************** | |
363 | * Write a bit to MDI/O | |
364 | */ | |
365 | static void | |
906da809 | 366 | mii_putbit(unsigned int ioaddr, unsigned data) |
1da177e4 LT |
367 | { |
368 | #if 1 | |
369 | if (data) { | |
370 | PutByte(XIRCREG2_GPR2, 0x0c|2|0); /* set MDIO */ | |
371 | udelay(1); | |
372 | PutByte(XIRCREG2_GPR2, 0x0c|2|1); /* and drive MDCK high */ | |
373 | udelay(1); | |
374 | } else { | |
375 | PutByte(XIRCREG2_GPR2, 0x0c|0|0); /* clear MDIO */ | |
376 | udelay(1); | |
377 | PutByte(XIRCREG2_GPR2, 0x0c|0|1); /* and drive MDCK high */ | |
378 | udelay(1); | |
379 | } | |
380 | #else | |
381 | if (data) { | |
382 | PutWord(XIRCREG2_GPR2-1, 0x0e0e); | |
383 | udelay(1); | |
384 | PutWord(XIRCREG2_GPR2-1, 0x0f0f); | |
385 | udelay(1); | |
386 | } else { | |
387 | PutWord(XIRCREG2_GPR2-1, 0x0c0c); | |
388 | udelay(1); | |
389 | PutWord(XIRCREG2_GPR2-1, 0x0d0d); | |
390 | udelay(1); | |
391 | } | |
392 | #endif | |
393 | } | |
394 | ||
395 | /**************** | |
396 | * Get a bit from MDI/O | |
397 | */ | |
398 | static int | |
906da809 | 399 | mii_getbit(unsigned int ioaddr) |
1da177e4 LT |
400 | { |
401 | unsigned d; | |
402 | ||
403 | PutByte(XIRCREG2_GPR2, 4|0); /* drive MDCK low */ | |
404 | udelay(1); | |
405 | d = GetByte(XIRCREG2_GPR2); /* read MDIO */ | |
406 | PutByte(XIRCREG2_GPR2, 4|1); /* drive MDCK high again */ | |
407 | udelay(1); | |
408 | return d & 0x20; /* read MDIO */ | |
409 | } | |
410 | ||
411 | static void | |
906da809 | 412 | mii_wbits(unsigned int ioaddr, unsigned data, int len) |
1da177e4 LT |
413 | { |
414 | unsigned m = 1 << (len-1); | |
415 | for (; m; m >>= 1) | |
416 | mii_putbit(ioaddr, data & m); | |
417 | } | |
418 | ||
419 | static unsigned | |
906da809 | 420 | mii_rd(unsigned int ioaddr, u_char phyaddr, u_char phyreg) |
1da177e4 LT |
421 | { |
422 | int i; | |
423 | unsigned data=0, m; | |
424 | ||
425 | SelectPage(2); | |
426 | for (i=0; i < 32; i++) /* 32 bit preamble */ | |
427 | mii_putbit(ioaddr, 1); | |
428 | mii_wbits(ioaddr, 0x06, 4); /* Start and opcode for read */ | |
429 | mii_wbits(ioaddr, phyaddr, 5); /* PHY address to be accessed */ | |
430 | mii_wbits(ioaddr, phyreg, 5); /* PHY register to read */ | |
431 | mii_idle(ioaddr); /* turn around */ | |
432 | mii_getbit(ioaddr); | |
433 | ||
434 | for (m = 1<<15; m; m >>= 1) | |
435 | if (mii_getbit(ioaddr)) | |
436 | data |= m; | |
437 | mii_idle(ioaddr); | |
438 | return data; | |
439 | } | |
440 | ||
441 | static void | |
906da809 OJ |
442 | mii_wr(unsigned int ioaddr, u_char phyaddr, u_char phyreg, unsigned data, |
443 | int len) | |
1da177e4 LT |
444 | { |
445 | int i; | |
446 | ||
447 | SelectPage(2); | |
448 | for (i=0; i < 32; i++) /* 32 bit preamble */ | |
449 | mii_putbit(ioaddr, 1); | |
450 | mii_wbits(ioaddr, 0x05, 4); /* Start and opcode for write */ | |
451 | mii_wbits(ioaddr, phyaddr, 5); /* PHY address to be accessed */ | |
452 | mii_wbits(ioaddr, phyreg, 5); /* PHY Register to write */ | |
453 | mii_putbit(ioaddr, 1); /* turn around */ | |
454 | mii_putbit(ioaddr, 0); | |
455 | mii_wbits(ioaddr, data, len); /* And write the data */ | |
456 | mii_idle(ioaddr); | |
457 | } | |
458 | ||
459 | /*============= Main bulk of functions =========================*/ | |
460 | ||
0cd6e828 SH |
461 | static const struct net_device_ops netdev_ops = { |
462 | .ndo_open = do_open, | |
463 | .ndo_stop = do_stop, | |
464 | .ndo_start_xmit = do_start_xmit, | |
465 | .ndo_tx_timeout = xirc_tx_timeout, | |
466 | .ndo_set_config = do_config, | |
467 | .ndo_do_ioctl = do_ioctl, | |
afc4b13d | 468 | .ndo_set_rx_mode = set_multicast_list, |
0cd6e828 SH |
469 | .ndo_change_mtu = eth_change_mtu, |
470 | .ndo_set_mac_address = eth_mac_addr, | |
471 | .ndo_validate_addr = eth_validate_addr, | |
472 | }; | |
473 | ||
f8cfa618 | 474 | static int |
15b99ac1 | 475 | xirc2ps_probe(struct pcmcia_device *link) |
1da177e4 | 476 | { |
1da177e4 | 477 | struct net_device *dev; |
f8653464 | 478 | struct local_info *local; |
1da177e4 | 479 | |
dd0fab5b | 480 | dev_dbg(&link->dev, "attach()\n"); |
1da177e4 LT |
481 | |
482 | /* Allocate the device structure */ | |
f8653464 | 483 | dev = alloc_etherdev(sizeof(struct local_info)); |
1da177e4 | 484 | if (!dev) |
f8cfa618 | 485 | return -ENOMEM; |
1da177e4 | 486 | local = netdev_priv(dev); |
c4028958 | 487 | local->dev = dev; |
fba395ee | 488 | local->p_dev = link; |
1da177e4 LT |
489 | link->priv = dev; |
490 | ||
491 | /* General socket configuration */ | |
7feabb64 | 492 | link->config_index = 1; |
1da177e4 LT |
493 | |
494 | /* Fill in card specific entries */ | |
0cd6e828 SH |
495 | dev->netdev_ops = &netdev_ops; |
496 | dev->ethtool_ops = &netdev_ethtool_ops; | |
1da177e4 | 497 | dev->watchdog_timeo = TX_TIMEOUT; |
c4028958 | 498 | INIT_WORK(&local->tx_timeout_task, xirc2ps_tx_timeout_task); |
1da177e4 | 499 | |
15b99ac1 | 500 | return xirc2ps_config(link); |
1da177e4 LT |
501 | } /* xirc2ps_attach */ |
502 | ||
1da177e4 | 503 | static void |
fba395ee | 504 | xirc2ps_detach(struct pcmcia_device *link) |
1da177e4 LT |
505 | { |
506 | struct net_device *dev = link->priv; | |
1da177e4 | 507 | |
dd0fab5b | 508 | dev_dbg(&link->dev, "detach\n"); |
1da177e4 | 509 | |
c7c2fa07 | 510 | unregister_netdev(dev); |
1da177e4 | 511 | |
e2d40963 | 512 | xirc2ps_release(link); |
1da177e4 | 513 | |
1da177e4 LT |
514 | free_netdev(dev); |
515 | } /* xirc2ps_detach */ | |
516 | ||
517 | /**************** | |
518 | * Detect the type of the card. s is the buffer with the data of tuple 0x20 | |
519 | * Returns: 0 := not supported | |
520 | * mediaid=11 and prodid=47 | |
521 | * Media-Id bits: | |
522 | * Ethernet 0x01 | |
523 | * Tokenring 0x02 | |
524 | * Arcnet 0x04 | |
525 | * Wireless 0x08 | |
526 | * Modem 0x10 | |
527 | * GSM only 0x20 | |
528 | * Prod-Id bits: | |
529 | * Pocket 0x10 | |
530 | * External 0x20 | |
531 | * Creditcard 0x40 | |
532 | * Cardbus 0x80 | |
533 | * | |
534 | */ | |
535 | static int | |
dddfbd82 | 536 | set_card_type(struct pcmcia_device *link) |
1da177e4 LT |
537 | { |
538 | struct net_device *dev = link->priv; | |
f8653464 | 539 | struct local_info *local = netdev_priv(dev); |
dddfbd82 DB |
540 | u8 *buf; |
541 | unsigned int cisrev, mediaid, prodid; | |
542 | size_t len; | |
543 | ||
544 | len = pcmcia_get_tuple(link, CISTPL_MANFID, &buf); | |
545 | if (len < 5) { | |
546 | dev_err(&link->dev, "invalid CIS -- sorry\n"); | |
547 | return 0; | |
548 | } | |
1da177e4 | 549 | |
dddfbd82 DB |
550 | cisrev = buf[2]; |
551 | mediaid = buf[3]; | |
552 | prodid = buf[4]; | |
1da177e4 | 553 | |
dd0fab5b | 554 | dev_dbg(&link->dev, "cisrev=%02x mediaid=%02x prodid=%02x\n", |
1da177e4 LT |
555 | cisrev, mediaid, prodid); |
556 | ||
557 | local->mohawk = 0; | |
558 | local->dingo = 0; | |
559 | local->modem = 0; | |
560 | local->card_type = XIR_UNKNOWN; | |
561 | if (!(prodid & 0x40)) { | |
636b8116 | 562 | pr_notice("Oops: Not a creditcard\n"); |
1da177e4 LT |
563 | return 0; |
564 | } | |
565 | if (!(mediaid & 0x01)) { | |
636b8116 | 566 | pr_notice("Not an Ethernet card\n"); |
1da177e4 LT |
567 | return 0; |
568 | } | |
569 | if (mediaid & 0x10) { | |
570 | local->modem = 1; | |
571 | switch(prodid & 15) { | |
572 | case 1: local->card_type = XIR_CEM ; break; | |
573 | case 2: local->card_type = XIR_CEM2 ; break; | |
574 | case 3: local->card_type = XIR_CEM3 ; break; | |
575 | case 4: local->card_type = XIR_CEM33 ; break; | |
576 | case 5: local->card_type = XIR_CEM56M; | |
577 | local->mohawk = 1; | |
578 | break; | |
579 | case 6: | |
580 | case 7: /* 7 is the RealPort 10/56 */ | |
581 | local->card_type = XIR_CEM56 ; | |
582 | local->mohawk = 1; | |
583 | local->dingo = 1; | |
584 | break; | |
585 | } | |
586 | } else { | |
587 | switch(prodid & 15) { | |
588 | case 1: local->card_type = has_ce2_string(link)? XIR_CE2 : XIR_CE ; | |
589 | break; | |
590 | case 2: local->card_type = XIR_CE2; break; | |
591 | case 3: local->card_type = XIR_CE3; | |
592 | local->mohawk = 1; | |
593 | break; | |
594 | } | |
595 | } | |
596 | if (local->card_type == XIR_CE || local->card_type == XIR_CEM) { | |
636b8116 | 597 | pr_notice("Sorry, this is an old CE card\n"); |
1da177e4 LT |
598 | return 0; |
599 | } | |
600 | if (local->card_type == XIR_UNKNOWN) | |
636b8116 | 601 | pr_notice("unknown card (mediaid=%02x prodid=%02x)\n", mediaid, prodid); |
1da177e4 LT |
602 | |
603 | return 1; | |
604 | } | |
605 | ||
606 | /**************** | |
607 | * There are some CE2 cards out which claim to be a CE card. | |
608 | * This function looks for a "CE2" in the 3rd version field. | |
609 | * Returns: true if this is a CE2 | |
610 | */ | |
611 | static int | |
a9606fd3 | 612 | has_ce2_string(struct pcmcia_device * p_dev) |
1da177e4 | 613 | { |
a9606fd3 DB |
614 | if (p_dev->prod_id[2] && strstr(p_dev->prod_id[2], "CE2")) |
615 | return 1; | |
616 | return 0; | |
1da177e4 LT |
617 | } |
618 | ||
b54bf94b | 619 | static int |
00990e7c | 620 | xirc2ps_config_modem(struct pcmcia_device *p_dev, void *priv_data) |
b54bf94b DB |
621 | { |
622 | unsigned int ioaddr; | |
623 | ||
00990e7c DB |
624 | if ((p_dev->resource[0]->start & 0xf) == 8) |
625 | return -ENODEV; | |
626 | ||
627 | p_dev->resource[0]->end = 16; | |
628 | p_dev->resource[1]->end = 8; | |
629 | p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; | |
630 | p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; | |
631 | p_dev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH; | |
632 | p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; | |
633 | p_dev->io_lines = 10; | |
634 | ||
635 | p_dev->resource[1]->start = p_dev->resource[0]->start; | |
636 | for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) { | |
637 | p_dev->resource[0]->start = ioaddr; | |
638 | if (!pcmcia_request_io(p_dev)) | |
639 | return 0; | |
b54bf94b DB |
640 | } |
641 | return -ENODEV; | |
642 | } | |
643 | ||
644 | static int | |
00990e7c | 645 | xirc2ps_config_check(struct pcmcia_device *p_dev, void *priv_data) |
b54bf94b DB |
646 | { |
647 | int *pass = priv_data; | |
00990e7c | 648 | resource_size_t tmp = p_dev->resource[1]->start; |
b54bf94b | 649 | |
00990e7c DB |
650 | tmp += (*pass ? (p_dev->config_index & 0x20 ? -24 : 8) |
651 | : (p_dev->config_index & 0x20 ? 8 : -24)); | |
652 | ||
653 | if ((p_dev->resource[0]->start & 0xf) == 8) | |
654 | return -ENODEV; | |
655 | ||
656 | p_dev->resource[0]->end = 18; | |
657 | p_dev->resource[1]->end = 8; | |
658 | p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; | |
659 | p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; | |
660 | p_dev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH; | |
661 | p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; | |
662 | p_dev->io_lines = 10; | |
b54bf94b | 663 | |
00990e7c DB |
664 | p_dev->resource[1]->start = p_dev->resource[0]->start; |
665 | p_dev->resource[0]->start = tmp; | |
666 | return pcmcia_request_io(p_dev); | |
b54bf94b DB |
667 | } |
668 | ||
dddfbd82 DB |
669 | |
670 | static int pcmcia_get_mac_ce(struct pcmcia_device *p_dev, | |
671 | tuple_t *tuple, | |
672 | void *priv) | |
673 | { | |
674 | struct net_device *dev = priv; | |
675 | int i; | |
676 | ||
677 | if (tuple->TupleDataLen != 13) | |
678 | return -EINVAL; | |
679 | if ((tuple->TupleData[0] != 2) || (tuple->TupleData[1] != 1) || | |
680 | (tuple->TupleData[2] != 6)) | |
681 | return -EINVAL; | |
682 | /* another try (James Lehmer's CE2 version 4.1)*/ | |
683 | for (i = 2; i < 6; i++) | |
684 | dev->dev_addr[i] = tuple->TupleData[i+2]; | |
685 | return 0; | |
686 | }; | |
687 | ||
688 | ||
15b99ac1 | 689 | static int |
fba395ee | 690 | xirc2ps_config(struct pcmcia_device * link) |
1da177e4 | 691 | { |
1da177e4 | 692 | struct net_device *dev = link->priv; |
f8653464 | 693 | struct local_info *local = netdev_priv(dev); |
b54bf94b | 694 | unsigned int ioaddr; |
dddfbd82 DB |
695 | int err; |
696 | u8 *buf; | |
697 | size_t len; | |
1da177e4 LT |
698 | |
699 | local->dingo_ccr = NULL; | |
700 | ||
dd0fab5b | 701 | dev_dbg(&link->dev, "config\n"); |
1da177e4 LT |
702 | |
703 | /* Is this a valid card */ | |
7d2e8d00 | 704 | if (link->has_manf_id == 0) { |
636b8116 | 705 | pr_notice("manfid not found in CIS\n"); |
1da177e4 LT |
706 | goto failure; |
707 | } | |
708 | ||
7d2e8d00 | 709 | switch (link->manf_id) { |
1da177e4 LT |
710 | case MANFID_XIRCOM: |
711 | local->manf_str = "Xircom"; | |
712 | break; | |
713 | case MANFID_ACCTON: | |
714 | local->manf_str = "Accton"; | |
715 | break; | |
716 | case MANFID_COMPAQ: | |
717 | case MANFID_COMPAQ2: | |
718 | local->manf_str = "Compaq"; | |
719 | break; | |
720 | case MANFID_INTEL: | |
721 | local->manf_str = "Intel"; | |
722 | break; | |
723 | case MANFID_TOSHIBA: | |
724 | local->manf_str = "Toshiba"; | |
725 | break; | |
726 | default: | |
636b8116 JP |
727 | pr_notice("Unknown Card Manufacturer ID: 0x%04x\n", |
728 | (unsigned)link->manf_id); | |
1da177e4 LT |
729 | goto failure; |
730 | } | |
dd0fab5b | 731 | dev_dbg(&link->dev, "found %s card\n", local->manf_str); |
1da177e4 | 732 | |
dddfbd82 | 733 | if (!set_card_type(link)) { |
636b8116 | 734 | pr_notice("this card is not supported\n"); |
1da177e4 LT |
735 | goto failure; |
736 | } | |
737 | ||
1da177e4 | 738 | /* get the ethernet address from the CIS */ |
dddfbd82 DB |
739 | err = pcmcia_get_mac_from_cis(link, dev); |
740 | ||
741 | /* not found: try to get the node-id from tuple 0x89 */ | |
742 | if (err) { | |
743 | len = pcmcia_get_tuple(link, 0x89, &buf); | |
744 | /* data layout looks like tuple 0x22 */ | |
745 | if (buf && len == 8) { | |
746 | if (*buf == CISTPL_FUNCE_LAN_NODE_ID) { | |
747 | int i; | |
748 | for (i = 2; i < 6; i++) | |
749 | dev->dev_addr[i] = buf[i+2]; | |
750 | } else | |
751 | err = -1; | |
1da177e4 | 752 | } |
dddfbd82 | 753 | kfree(buf); |
1da177e4 | 754 | } |
dddfbd82 DB |
755 | |
756 | if (err) | |
757 | err = pcmcia_loop_tuple(link, CISTPL_FUNCE, pcmcia_get_mac_ce, dev); | |
758 | ||
1da177e4 | 759 | if (err) { |
636b8116 | 760 | pr_notice("node-id not found in CIS\n"); |
1da177e4 LT |
761 | goto failure; |
762 | } | |
1da177e4 | 763 | |
1da177e4 LT |
764 | if (local->modem) { |
765 | int pass; | |
00990e7c | 766 | link->config_flags |= CONF_AUTO_SET_IO; |
1da177e4 | 767 | |
1da177e4 LT |
768 | if (local->dingo) { |
769 | /* Take the Modem IO port from the CIS and scan for a free | |
770 | * Ethernet port */ | |
b54bf94b DB |
771 | if (!pcmcia_loop_config(link, xirc2ps_config_modem, NULL)) |
772 | goto port_found; | |
1da177e4 | 773 | } else { |
1da177e4 LT |
774 | /* We do 2 passes here: The first one uses the regular mapping and |
775 | * the second tries again, thereby considering that the 32 ports are | |
776 | * mirrored every 32 bytes. Actually we use a mirrored port for | |
777 | * the Mako if (on the first pass) the COR bit 5 is set. | |
778 | */ | |
b54bf94b | 779 | for (pass=0; pass < 2; pass++) |
440eed43 DB |
780 | if (!pcmcia_loop_config(link, xirc2ps_config_check, |
781 | &pass)) | |
1da177e4 | 782 | goto port_found; |
1da177e4 LT |
783 | /* if special option: |
784 | * try to configure as Ethernet only. | |
785 | * .... */ | |
786 | } | |
636b8116 | 787 | pr_notice("no ports available\n"); |
1da177e4 | 788 | } else { |
00990e7c | 789 | link->io_lines = 10; |
90abdc3b | 790 | link->resource[0]->end = 16; |
00990e7c | 791 | link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; |
1da177e4 | 792 | for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) { |
90abdc3b DB |
793 | link->resource[0]->start = ioaddr; |
794 | if (!(err = pcmcia_request_io(link))) | |
1da177e4 LT |
795 | goto port_found; |
796 | } | |
90abdc3b DB |
797 | link->resource[0]->start = 0; /* let CS decide */ |
798 | if ((err = pcmcia_request_io(link))) | |
1da177e4 | 799 | goto config_error; |
1da177e4 LT |
800 | } |
801 | port_found: | |
802 | if (err) | |
803 | goto config_error; | |
804 | ||
805 | /**************** | |
806 | * Now allocate an interrupt line. Note that this does not | |
807 | * actually assign a handler to the interrupt. | |
808 | */ | |
eb14120f | 809 | if ((err=pcmcia_request_irq(link, xirc2ps_interrupt))) |
1da177e4 | 810 | goto config_error; |
1da177e4 | 811 | |
1ac71e5a DB |
812 | link->config_flags |= CONF_ENABLE_IRQ; |
813 | if (do_sound) | |
814 | link->config_flags |= CONF_ENABLE_SPKR; | |
815 | ||
816 | if ((err = pcmcia_enable_device(link))) | |
1da177e4 | 817 | goto config_error; |
1da177e4 LT |
818 | |
819 | if (local->dingo) { | |
1da177e4 LT |
820 | /* Reset the modem's BAR to the correct value |
821 | * This is necessary because in the RequestConfiguration call, | |
822 | * the base address of the ethernet port (BasePort1) is written | |
823 | * to the BAR registers of the modem. | |
824 | */ | |
9a017a91 DB |
825 | err = pcmcia_write_config_byte(link, CISREG_IOBASE_0, (u8) |
826 | link->resource[1]->start & 0xff); | |
1d5cc192 | 827 | if (err) |
1da177e4 | 828 | goto config_error; |
1d5cc192 DB |
829 | |
830 | err = pcmcia_write_config_byte(link, CISREG_IOBASE_1, | |
9a017a91 | 831 | (link->resource[1]->start >> 8) & 0xff); |
1d5cc192 | 832 | if (err) |
1da177e4 | 833 | goto config_error; |
1da177e4 LT |
834 | |
835 | /* There is no config entry for the Ethernet part which | |
836 | * is at 0x0800. So we allocate a window into the attribute | |
837 | * memory and write direct to the CIS registers | |
838 | */ | |
cdb13808 DB |
839 | link->resource[2]->flags = WIN_DATA_WIDTH_8 | WIN_MEMORY_TYPE_AM | |
840 | WIN_ENABLE; | |
841 | link->resource[2]->start = link->resource[2]->end = 0; | |
842 | if ((err = pcmcia_request_window(link, link->resource[2], 0))) | |
1da177e4 | 843 | goto config_error; |
dd0fab5b | 844 | |
cdb13808 DB |
845 | local->dingo_ccr = ioremap(link->resource[2]->start, 0x1000) + 0x0800; |
846 | if ((err = pcmcia_map_mem_page(link, link->resource[2], 0))) | |
1da177e4 | 847 | goto config_error; |
1da177e4 LT |
848 | |
849 | /* Setup the CCRs; there are no infos in the CIS about the Ethernet | |
850 | * part. | |
851 | */ | |
852 | writeb(0x47, local->dingo_ccr + CISREG_COR); | |
9a017a91 | 853 | ioaddr = link->resource[0]->start; |
1da177e4 LT |
854 | writeb(ioaddr & 0xff , local->dingo_ccr + CISREG_IOBASE_0); |
855 | writeb((ioaddr >> 8)&0xff , local->dingo_ccr + CISREG_IOBASE_1); | |
856 | ||
857 | #if 0 | |
858 | { | |
859 | u_char tmp; | |
636b8116 | 860 | pr_info("ECOR:"); |
1da177e4 LT |
861 | for (i=0; i < 7; i++) { |
862 | tmp = readb(local->dingo_ccr + i*2); | |
636b8116 | 863 | pr_cont(" %02x", tmp); |
1da177e4 | 864 | } |
636b8116 JP |
865 | pr_cont("\n"); |
866 | pr_info("DCOR:"); | |
1da177e4 LT |
867 | for (i=0; i < 4; i++) { |
868 | tmp = readb(local->dingo_ccr + 0x20 + i*2); | |
636b8116 | 869 | pr_cont(" %02x", tmp); |
1da177e4 | 870 | } |
636b8116 JP |
871 | pr_cont("\n"); |
872 | pr_info("SCOR:"); | |
1da177e4 LT |
873 | for (i=0; i < 10; i++) { |
874 | tmp = readb(local->dingo_ccr + 0x40 + i*2); | |
636b8116 | 875 | pr_cont(" %02x", tmp); |
1da177e4 | 876 | } |
636b8116 | 877 | pr_cont("\n"); |
1da177e4 LT |
878 | } |
879 | #endif | |
880 | ||
881 | writeb(0x01, local->dingo_ccr + 0x20); | |
882 | writeb(0x0c, local->dingo_ccr + 0x22); | |
883 | writeb(0x00, local->dingo_ccr + 0x24); | |
884 | writeb(0x00, local->dingo_ccr + 0x26); | |
885 | writeb(0x00, local->dingo_ccr + 0x28); | |
886 | } | |
887 | ||
888 | /* The if_port symbol can be set when the module is loaded */ | |
889 | local->probe_port=0; | |
890 | if (!if_port) { | |
891 | local->probe_port = dev->if_port = 1; | |
892 | } else if ((if_port >= 1 && if_port <= 2) || | |
893 | (local->mohawk && if_port==4)) | |
894 | dev->if_port = if_port; | |
895 | else | |
636b8116 | 896 | pr_notice("invalid if_port requested\n"); |
1da177e4 LT |
897 | |
898 | /* we can now register the device with the net subsystem */ | |
eb14120f | 899 | dev->irq = link->irq; |
9a017a91 | 900 | dev->base_addr = link->resource[0]->start; |
1da177e4 LT |
901 | |
902 | if (local->dingo) | |
903 | do_reset(dev, 1); /* a kludge to make the cem56 work */ | |
904 | ||
dd2e5a15 | 905 | SET_NETDEV_DEV(dev, &link->dev); |
1da177e4 LT |
906 | |
907 | if ((err=register_netdev(dev))) { | |
636b8116 | 908 | pr_notice("register_netdev() failed\n"); |
1da177e4 LT |
909 | goto config_error; |
910 | } | |
911 | ||
1da177e4 | 912 | /* give some infos about the hardware */ |
636b8116 JP |
913 | netdev_info(dev, "%s: port %#3lx, irq %d, hwaddr %pM\n", |
914 | local->manf_str, (u_long)dev->base_addr, (int)dev->irq, | |
915 | dev->dev_addr); | |
1da177e4 | 916 | |
15b99ac1 | 917 | return 0; |
1da177e4 LT |
918 | |
919 | config_error: | |
1da177e4 | 920 | xirc2ps_release(link); |
15b99ac1 | 921 | return -ENODEV; |
1da177e4 | 922 | |
1da177e4 | 923 | failure: |
15b99ac1 | 924 | return -ENODEV; |
1da177e4 LT |
925 | } /* xirc2ps_config */ |
926 | ||
1da177e4 | 927 | static void |
fba395ee | 928 | xirc2ps_release(struct pcmcia_device *link) |
1da177e4 | 929 | { |
dd0fab5b | 930 | dev_dbg(&link->dev, "release\n"); |
1da177e4 | 931 | |
cdb13808 | 932 | if (link->resource[2]->end) { |
5f2a71fc | 933 | struct net_device *dev = link->priv; |
f8653464 | 934 | struct local_info *local = netdev_priv(dev); |
5f2a71fc DB |
935 | if (local->dingo) |
936 | iounmap(local->dingo_ccr - 0x0800); | |
937 | } | |
fba395ee | 938 | pcmcia_disable_device(link); |
1da177e4 LT |
939 | } /* xirc2ps_release */ |
940 | ||
941 | /*====================================================================*/ | |
942 | ||
98e4c28b | 943 | |
fba395ee | 944 | static int xirc2ps_suspend(struct pcmcia_device *link) |
98e4c28b | 945 | { |
98e4c28b DB |
946 | struct net_device *dev = link->priv; |
947 | ||
e2d40963 DB |
948 | if (link->open) { |
949 | netif_device_detach(dev); | |
950 | do_powerdown(dev); | |
98e4c28b DB |
951 | } |
952 | ||
953 | return 0; | |
954 | } | |
955 | ||
fba395ee | 956 | static int xirc2ps_resume(struct pcmcia_device *link) |
98e4c28b | 957 | { |
98e4c28b DB |
958 | struct net_device *dev = link->priv; |
959 | ||
e2d40963 | 960 | if (link->open) { |
8661bb5b DB |
961 | do_reset(dev,1); |
962 | netif_device_attach(dev); | |
98e4c28b DB |
963 | } |
964 | ||
965 | return 0; | |
966 | } | |
967 | ||
1da177e4 LT |
968 | |
969 | /*====================================================================*/ | |
970 | ||
971 | /**************** | |
972 | * This is the Interrupt service route. | |
973 | */ | |
974 | static irqreturn_t | |
7d12e780 | 975 | xirc2ps_interrupt(int irq, void *dev_id) |
1da177e4 LT |
976 | { |
977 | struct net_device *dev = (struct net_device *)dev_id; | |
f8653464 | 978 | struct local_info *lp = netdev_priv(dev); |
906da809 | 979 | unsigned int ioaddr; |
1da177e4 LT |
980 | u_char saved_page; |
981 | unsigned bytes_rcvd; | |
982 | unsigned int_status, eth_status, rx_status, tx_status; | |
983 | unsigned rsr, pktlen; | |
984 | ulong start_ticks = jiffies; /* fixme: jiffies rollover every 497 days | |
985 | * is this something to worry about? | |
986 | * -- on a laptop? | |
987 | */ | |
988 | ||
989 | if (!netif_device_present(dev)) | |
990 | return IRQ_HANDLED; | |
991 | ||
992 | ioaddr = dev->base_addr; | |
993 | if (lp->mohawk) { /* must disable the interrupt */ | |
994 | PutByte(XIRCREG_CR, 0); | |
995 | } | |
996 | ||
dd0fab5b | 997 | pr_debug("%s: interrupt %d at %#x.\n", dev->name, irq, ioaddr); |
1da177e4 LT |
998 | |
999 | saved_page = GetByte(XIRCREG_PR); | |
1000 | /* Read the ISR to see whats the cause for the interrupt. | |
1001 | * This also clears the interrupt flags on CE2 cards | |
1002 | */ | |
1003 | int_status = GetByte(XIRCREG_ISR); | |
1004 | bytes_rcvd = 0; | |
1005 | loop_entry: | |
1006 | if (int_status == 0xff) { /* card may be ejected */ | |
dd0fab5b | 1007 | pr_debug("%s: interrupt %d for dead card\n", dev->name, irq); |
1da177e4 LT |
1008 | goto leave; |
1009 | } | |
1010 | eth_status = GetByte(XIRCREG_ESR); | |
1011 | ||
1012 | SelectPage(0x40); | |
1013 | rx_status = GetByte(XIRCREG40_RXST0); | |
1014 | PutByte(XIRCREG40_RXST0, (~rx_status & 0xff)); | |
1015 | tx_status = GetByte(XIRCREG40_TXST0); | |
1016 | tx_status |= GetByte(XIRCREG40_TXST1) << 8; | |
1017 | PutByte(XIRCREG40_TXST0, 0); | |
1018 | PutByte(XIRCREG40_TXST1, 0); | |
1019 | ||
dd0fab5b | 1020 | pr_debug("%s: ISR=%#2.2x ESR=%#2.2x RSR=%#2.2x TSR=%#4.4x\n", |
1da177e4 LT |
1021 | dev->name, int_status, eth_status, rx_status, tx_status); |
1022 | ||
1023 | /***** receive section ******/ | |
1024 | SelectPage(0); | |
1025 | while (eth_status & FullPktRcvd) { | |
1026 | rsr = GetByte(XIRCREG0_RSR); | |
1027 | if (bytes_rcvd > maxrx_bytes && (rsr & PktRxOk)) { | |
1028 | /* too many bytes received during this int, drop the rest of the | |
1029 | * packets */ | |
6394d7c9 | 1030 | dev->stats.rx_dropped++; |
dd0fab5b | 1031 | pr_debug("%s: RX drop, too much done\n", dev->name); |
1da177e4 LT |
1032 | } else if (rsr & PktRxOk) { |
1033 | struct sk_buff *skb; | |
1034 | ||
1035 | pktlen = GetWord(XIRCREG0_RBC); | |
1036 | bytes_rcvd += pktlen; | |
1037 | ||
dd0fab5b | 1038 | pr_debug("rsr=%#02x packet_length=%u\n", rsr, pktlen); |
1da177e4 | 1039 | |
dae2e9f4 PD |
1040 | /* 1 extra so we can use insw */ |
1041 | skb = netdev_alloc_skb(dev, pktlen + 3); | |
1da177e4 | 1042 | if (!skb) { |
6394d7c9 | 1043 | dev->stats.rx_dropped++; |
1da177e4 LT |
1044 | } else { /* okay get the packet */ |
1045 | skb_reserve(skb, 2); | |
1046 | if (lp->silicon == 0 ) { /* work around a hardware bug */ | |
1047 | unsigned rhsa; /* receive start address */ | |
1048 | ||
1049 | SelectPage(5); | |
1050 | rhsa = GetWord(XIRCREG5_RHSA0); | |
1051 | SelectPage(0); | |
1052 | rhsa += 3; /* skip control infos */ | |
1053 | if (rhsa >= 0x8000) | |
1054 | rhsa = 0; | |
1055 | if (rhsa + pktlen > 0x8000) { | |
1056 | unsigned i; | |
1057 | u_char *buf = skb_put(skb, pktlen); | |
1058 | for (i=0; i < pktlen ; i++, rhsa++) { | |
1059 | buf[i] = GetByte(XIRCREG_EDP); | |
1060 | if (rhsa == 0x8000) { | |
1061 | rhsa = 0; | |
1062 | i--; | |
1063 | } | |
1064 | } | |
1065 | } else { | |
1066 | insw(ioaddr+XIRCREG_EDP, | |
1067 | skb_put(skb, pktlen), (pktlen+1)>>1); | |
1068 | } | |
1069 | } | |
1070 | #if 0 | |
1071 | else if (lp->mohawk) { | |
1072 | /* To use this 32 bit access we should use | |
1073 | * a manual optimized loop | |
1074 | * Also the words are swapped, we can get more | |
1075 | * performance by using 32 bit access and swapping | |
1076 | * the words in a register. Will need this for cardbus | |
1077 | * | |
1078 | * Note: don't forget to change the ALLOC_SKB to .. +3 | |
1079 | */ | |
1080 | unsigned i; | |
1081 | u_long *p = skb_put(skb, pktlen); | |
1082 | register u_long a; | |
906da809 | 1083 | unsigned int edpreg = ioaddr+XIRCREG_EDP-2; |
1da177e4 LT |
1084 | for (i=0; i < len ; i += 4, p++) { |
1085 | a = inl(edpreg); | |
1086 | __asm__("rorl $16,%0\n\t" | |
1087 | :"=q" (a) | |
1088 | : "0" (a)); | |
1089 | *p = a; | |
1090 | } | |
1091 | } | |
1092 | #endif | |
1093 | else { | |
1094 | insw(ioaddr+XIRCREG_EDP, skb_put(skb, pktlen), | |
1095 | (pktlen+1)>>1); | |
1096 | } | |
1097 | skb->protocol = eth_type_trans(skb, dev); | |
1da177e4 | 1098 | netif_rx(skb); |
6394d7c9 SH |
1099 | dev->stats.rx_packets++; |
1100 | dev->stats.rx_bytes += pktlen; | |
1da177e4 | 1101 | if (!(rsr & PhyPkt)) |
6394d7c9 | 1102 | dev->stats.multicast++; |
1da177e4 LT |
1103 | } |
1104 | } else { /* bad packet */ | |
dd0fab5b | 1105 | pr_debug("rsr=%#02x\n", rsr); |
1da177e4 LT |
1106 | } |
1107 | if (rsr & PktTooLong) { | |
6394d7c9 | 1108 | dev->stats.rx_frame_errors++; |
dd0fab5b | 1109 | pr_debug("%s: Packet too long\n", dev->name); |
1da177e4 LT |
1110 | } |
1111 | if (rsr & CRCErr) { | |
6394d7c9 | 1112 | dev->stats.rx_crc_errors++; |
dd0fab5b | 1113 | pr_debug("%s: CRC error\n", dev->name); |
1da177e4 LT |
1114 | } |
1115 | if (rsr & AlignErr) { | |
6394d7c9 | 1116 | dev->stats.rx_fifo_errors++; /* okay ? */ |
dd0fab5b | 1117 | pr_debug("%s: Alignment error\n", dev->name); |
1da177e4 LT |
1118 | } |
1119 | ||
1120 | /* clear the received/dropped/error packet */ | |
1121 | PutWord(XIRCREG0_DO, 0x8000); /* issue cmd: skip_rx_packet */ | |
1122 | ||
1123 | /* get the new ethernet status */ | |
1124 | eth_status = GetByte(XIRCREG_ESR); | |
1125 | } | |
1126 | if (rx_status & 0x10) { /* Receive overrun */ | |
6394d7c9 | 1127 | dev->stats.rx_over_errors++; |
1da177e4 | 1128 | PutByte(XIRCREG_CR, ClearRxOvrun); |
dd0fab5b | 1129 | pr_debug("receive overrun cleared\n"); |
1da177e4 LT |
1130 | } |
1131 | ||
1132 | /***** transmit section ******/ | |
1133 | if (int_status & PktTxed) { | |
1134 | unsigned n, nn; | |
1135 | ||
1136 | n = lp->last_ptr_value; | |
1137 | nn = GetByte(XIRCREG0_PTR); | |
1138 | lp->last_ptr_value = nn; | |
1139 | if (nn < n) /* rollover */ | |
6394d7c9 | 1140 | dev->stats.tx_packets += 256 - n; |
1da177e4 | 1141 | else if (n == nn) { /* happens sometimes - don't know why */ |
dd0fab5b | 1142 | pr_debug("PTR not changed?\n"); |
1da177e4 | 1143 | } else |
6394d7c9 | 1144 | dev->stats.tx_packets += lp->last_ptr_value - n; |
1da177e4 LT |
1145 | netif_wake_queue(dev); |
1146 | } | |
1147 | if (tx_status & 0x0002) { /* Execessive collissions */ | |
dd0fab5b | 1148 | pr_debug("tx restarted due to execssive collissions\n"); |
1da177e4 LT |
1149 | PutByte(XIRCREG_CR, RestartTx); /* restart transmitter process */ |
1150 | } | |
1151 | if (tx_status & 0x0040) | |
6394d7c9 | 1152 | dev->stats.tx_aborted_errors++; |
1da177e4 LT |
1153 | |
1154 | /* recalculate our work chunk so that we limit the duration of this | |
1155 | * ISR to about 1/10 of a second. | |
1156 | * Calculate only if we received a reasonable amount of bytes. | |
1157 | */ | |
1158 | if (bytes_rcvd > 1000) { | |
1159 | u_long duration = jiffies - start_ticks; | |
1160 | ||
1161 | if (duration >= HZ/10) { /* if more than about 1/10 second */ | |
1162 | maxrx_bytes = (bytes_rcvd * (HZ/10)) / duration; | |
1163 | if (maxrx_bytes < 2000) | |
1164 | maxrx_bytes = 2000; | |
1165 | else if (maxrx_bytes > 22000) | |
1166 | maxrx_bytes = 22000; | |
dd0fab5b | 1167 | pr_debug("set maxrx=%u (rcvd=%u ticks=%lu)\n", |
1da177e4 LT |
1168 | maxrx_bytes, bytes_rcvd, duration); |
1169 | } else if (!duration && maxrx_bytes < 22000) { | |
1170 | /* now much faster */ | |
1171 | maxrx_bytes += 2000; | |
1172 | if (maxrx_bytes > 22000) | |
1173 | maxrx_bytes = 22000; | |
dd0fab5b | 1174 | pr_debug("set maxrx=%u\n", maxrx_bytes); |
1da177e4 LT |
1175 | } |
1176 | } | |
1177 | ||
1178 | leave: | |
1179 | if (lockup_hack) { | |
1180 | if (int_status != 0xff && (int_status = GetByte(XIRCREG_ISR)) != 0) | |
1181 | goto loop_entry; | |
1182 | } | |
1183 | SelectPage(saved_page); | |
1184 | PutByte(XIRCREG_CR, EnableIntr); /* re-enable interrupts */ | |
1185 | /* Instead of dropping packets during a receive, we could | |
1186 | * force an interrupt with this command: | |
1187 | * PutByte(XIRCREG_CR, EnableIntr|ForceIntr); | |
1188 | */ | |
1189 | return IRQ_HANDLED; | |
1190 | } /* xirc2ps_interrupt */ | |
1191 | ||
1192 | /*====================================================================*/ | |
1193 | ||
1194 | static void | |
c4028958 | 1195 | xirc2ps_tx_timeout_task(struct work_struct *work) |
1da177e4 | 1196 | { |
f8653464 HS |
1197 | struct local_info *local = |
1198 | container_of(work, struct local_info, tx_timeout_task); | |
c4028958 | 1199 | struct net_device *dev = local->dev; |
1da177e4 LT |
1200 | /* reset the card */ |
1201 | do_reset(dev,1); | |
860e9538 | 1202 | netif_trans_update(dev); /* prevent tx timeout */ |
1da177e4 LT |
1203 | netif_wake_queue(dev); |
1204 | } | |
1205 | ||
9a469abe | 1206 | static void |
ed4cb133 | 1207 | xirc_tx_timeout(struct net_device *dev) |
9a469abe | 1208 | { |
f8653464 | 1209 | struct local_info *lp = netdev_priv(dev); |
6394d7c9 | 1210 | dev->stats.tx_errors++; |
636b8116 | 1211 | netdev_notice(dev, "transmit timed out\n"); |
9a469abe JA |
1212 | schedule_work(&lp->tx_timeout_task); |
1213 | } | |
1214 | ||
dbf02fae | 1215 | static netdev_tx_t |
1da177e4 LT |
1216 | do_start_xmit(struct sk_buff *skb, struct net_device *dev) |
1217 | { | |
f8653464 | 1218 | struct local_info *lp = netdev_priv(dev); |
906da809 | 1219 | unsigned int ioaddr = dev->base_addr; |
1da177e4 LT |
1220 | int okay; |
1221 | unsigned freespace; | |
da4f5ccf | 1222 | unsigned pktlen = skb->len; |
1da177e4 | 1223 | |
dd0fab5b | 1224 | pr_debug("do_start_xmit(skb=%p, dev=%p) len=%u\n", |
1da177e4 LT |
1225 | skb, dev, pktlen); |
1226 | ||
1227 | ||
1228 | /* adjust the packet length to min. required | |
1229 | * and hope that the buffer is large enough | |
1230 | * to provide some random data. | |
1231 | * fixme: For Mohawk we can change this by sending | |
1232 | * a larger packetlen than we actually have; the chip will | |
1233 | * pad this in his buffer with random bytes | |
1234 | */ | |
1235 | if (pktlen < ETH_ZLEN) | |
1236 | { | |
5b057c6b | 1237 | if (skb_padto(skb, ETH_ZLEN)) |
6ed10654 | 1238 | return NETDEV_TX_OK; |
1da177e4 LT |
1239 | pktlen = ETH_ZLEN; |
1240 | } | |
1241 | ||
1242 | netif_stop_queue(dev); | |
1243 | SelectPage(0); | |
1244 | PutWord(XIRCREG0_TRS, (u_short)pktlen+2); | |
1245 | freespace = GetWord(XIRCREG0_TSO); | |
1246 | okay = freespace & 0x8000; | |
1247 | freespace &= 0x7fff; | |
1248 | /* TRS doesn't work - (indeed it is eliminated with sil-rev 1) */ | |
1249 | okay = pktlen +2 < freespace; | |
dd0fab5b | 1250 | pr_debug("%s: avail. tx space=%u%s\n", |
1da177e4 LT |
1251 | dev->name, freespace, okay ? " (okay)":" (not enough)"); |
1252 | if (!okay) { /* not enough space */ | |
5b548140 | 1253 | return NETDEV_TX_BUSY; /* upper layer may decide to requeue this packet */ |
1da177e4 LT |
1254 | } |
1255 | /* send the packet */ | |
1256 | PutWord(XIRCREG_EDP, (u_short)pktlen); | |
1257 | outsw(ioaddr+XIRCREG_EDP, skb->data, pktlen>>1); | |
1258 | if (pktlen & 1) | |
1259 | PutByte(XIRCREG_EDP, skb->data[pktlen-1]); | |
1260 | ||
1261 | if (lp->mohawk) | |
1262 | PutByte(XIRCREG_CR, TransmitPacket|EnableIntr); | |
1263 | ||
1264 | dev_kfree_skb (skb); | |
6394d7c9 | 1265 | dev->stats.tx_bytes += pktlen; |
1da177e4 | 1266 | netif_start_queue(dev); |
6ed10654 | 1267 | return NETDEV_TX_OK; |
1da177e4 LT |
1268 | } |
1269 | ||
91fea585 JP |
1270 | struct set_address_info { |
1271 | int reg_nr; | |
1272 | int page_nr; | |
1273 | int mohawk; | |
1274 | unsigned int ioaddr; | |
1275 | }; | |
1276 | ||
1277 | static void set_address(struct set_address_info *sa_info, char *addr) | |
1278 | { | |
1279 | unsigned int ioaddr = sa_info->ioaddr; | |
1280 | int i; | |
1281 | ||
1282 | for (i = 0; i < 6; i++) { | |
1283 | if (sa_info->reg_nr > 15) { | |
1284 | sa_info->reg_nr = 8; | |
1285 | sa_info->page_nr++; | |
1286 | SelectPage(sa_info->page_nr); | |
1287 | } | |
1288 | if (sa_info->mohawk) | |
1289 | PutByte(sa_info->reg_nr++, addr[5 - i]); | |
1290 | else | |
1291 | PutByte(sa_info->reg_nr++, addr[i]); | |
1292 | } | |
1293 | } | |
1294 | ||
1da177e4 LT |
1295 | /**************** |
1296 | * Set all addresses: This first one is the individual address, | |
1297 | * the next 9 addresses are taken from the multicast list and | |
1298 | * the rest is filled with the individual address. | |
1299 | */ | |
91fea585 | 1300 | static void set_addresses(struct net_device *dev) |
1da177e4 | 1301 | { |
91fea585 | 1302 | unsigned int ioaddr = dev->base_addr; |
f8653464 | 1303 | struct local_info *lp = netdev_priv(dev); |
22bedad3 | 1304 | struct netdev_hw_addr *ha; |
91fea585 JP |
1305 | struct set_address_info sa_info; |
1306 | int i; | |
1da177e4 | 1307 | |
91fea585 JP |
1308 | /* |
1309 | * Setup the info structure so that by first set_address call it will do | |
1310 | * SelectPage with the right page number. Hence these ones here. | |
1311 | */ | |
1312 | sa_info.reg_nr = 15 + 1; | |
1313 | sa_info.page_nr = 0x50 - 1; | |
1314 | sa_info.mohawk = lp->mohawk; | |
1315 | sa_info.ioaddr = ioaddr; | |
1316 | ||
1317 | set_address(&sa_info, dev->dev_addr); | |
1318 | i = 0; | |
22bedad3 | 1319 | netdev_for_each_mc_addr(ha, dev) { |
91fea585 JP |
1320 | if (i++ == 9) |
1321 | break; | |
22bedad3 | 1322 | set_address(&sa_info, ha->addr); |
91fea585 JP |
1323 | } |
1324 | while (i++ < 9) | |
1325 | set_address(&sa_info, dev->dev_addr); | |
1326 | SelectPage(0); | |
1da177e4 LT |
1327 | } |
1328 | ||
1329 | /**************** | |
1330 | * Set or clear the multicast filter for this adaptor. | |
1331 | * We can filter up to 9 addresses, if more are requested we set | |
1332 | * multicast promiscuous mode. | |
1333 | */ | |
1334 | ||
1335 | static void | |
1336 | set_multicast_list(struct net_device *dev) | |
1337 | { | |
906da809 | 1338 | unsigned int ioaddr = dev->base_addr; |
43fc63dc | 1339 | unsigned value; |
1da177e4 LT |
1340 | |
1341 | SelectPage(0x42); | |
43fc63dc K |
1342 | value = GetByte(XIRCREG42_SWC1) & 0xC0; |
1343 | ||
1da177e4 | 1344 | if (dev->flags & IFF_PROMISC) { /* snoop */ |
43fc63dc | 1345 | PutByte(XIRCREG42_SWC1, value | 0x06); /* set MPE and PME */ |
4cd24eaf | 1346 | } else if (netdev_mc_count(dev) > 9 || (dev->flags & IFF_ALLMULTI)) { |
43fc63dc | 1347 | PutByte(XIRCREG42_SWC1, value | 0x02); /* set MPE */ |
4cd24eaf | 1348 | } else if (!netdev_mc_empty(dev)) { |
1da177e4 | 1349 | /* the chip can filter 9 addresses perfectly */ |
43fc63dc | 1350 | PutByte(XIRCREG42_SWC1, value | 0x01); |
1da177e4 LT |
1351 | SelectPage(0x40); |
1352 | PutByte(XIRCREG40_CMD0, Offline); | |
1353 | set_addresses(dev); | |
1354 | SelectPage(0x40); | |
1355 | PutByte(XIRCREG40_CMD0, EnableRecv | Online); | |
1356 | } else { /* standard usage */ | |
43fc63dc | 1357 | PutByte(XIRCREG42_SWC1, value | 0x00); |
1da177e4 LT |
1358 | } |
1359 | SelectPage(0); | |
1360 | } | |
1361 | ||
1362 | static int | |
1363 | do_config(struct net_device *dev, struct ifmap *map) | |
1364 | { | |
f8653464 | 1365 | struct local_info *local = netdev_priv(dev); |
1da177e4 | 1366 | |
dd0fab5b | 1367 | pr_debug("do_config(%p)\n", dev); |
1da177e4 LT |
1368 | if (map->port != 255 && map->port != dev->if_port) { |
1369 | if (map->port > 4) | |
1370 | return -EINVAL; | |
1371 | if (!map->port) { | |
1372 | local->probe_port = 1; | |
1373 | dev->if_port = 1; | |
1374 | } else { | |
1375 | local->probe_port = 0; | |
1376 | dev->if_port = map->port; | |
1377 | } | |
636b8116 | 1378 | netdev_info(dev, "switching to %s port\n", if_names[dev->if_port]); |
1da177e4 LT |
1379 | do_reset(dev,1); /* not the fine way :-) */ |
1380 | } | |
1381 | return 0; | |
1382 | } | |
1383 | ||
1384 | /**************** | |
1385 | * Open the driver | |
1386 | */ | |
1387 | static int | |
1388 | do_open(struct net_device *dev) | |
1389 | { | |
f8653464 | 1390 | struct local_info *lp = netdev_priv(dev); |
fba395ee | 1391 | struct pcmcia_device *link = lp->p_dev; |
1da177e4 | 1392 | |
dd0fab5b | 1393 | dev_dbg(&link->dev, "do_open(%p)\n", dev); |
1da177e4 LT |
1394 | |
1395 | /* Check that the PCMCIA card is still here. */ | |
1396 | /* Physical device present signature. */ | |
9940ec36 | 1397 | if (!pcmcia_dev_present(link)) |
1da177e4 LT |
1398 | return -ENODEV; |
1399 | ||
1400 | /* okay */ | |
1401 | link->open++; | |
1402 | ||
1403 | netif_start_queue(dev); | |
1404 | do_reset(dev,1); | |
1405 | ||
1406 | return 0; | |
1407 | } | |
1408 | ||
1409 | static void netdev_get_drvinfo(struct net_device *dev, | |
1410 | struct ethtool_drvinfo *info) | |
1411 | { | |
68aad78c | 1412 | strlcpy(info->driver, "xirc2ps_cs", sizeof(info->driver)); |
7826d43f JP |
1413 | snprintf(info->bus_info, sizeof(info->bus_info), "PCMCIA 0x%lx", |
1414 | dev->base_addr); | |
1da177e4 LT |
1415 | } |
1416 | ||
7282d491 | 1417 | static const struct ethtool_ops netdev_ethtool_ops = { |
1da177e4 LT |
1418 | .get_drvinfo = netdev_get_drvinfo, |
1419 | }; | |
1420 | ||
1421 | static int | |
1422 | do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) | |
1423 | { | |
f8653464 | 1424 | struct local_info *local = netdev_priv(dev); |
906da809 | 1425 | unsigned int ioaddr = dev->base_addr; |
0fa0ee05 | 1426 | struct mii_ioctl_data *data = if_mii(rq); |
1da177e4 | 1427 | |
dd0fab5b | 1428 | pr_debug("%s: ioctl(%-.6s, %#04x) %04x %04x %04x %04x\n", |
1da177e4 | 1429 | dev->name, rq->ifr_ifrn.ifrn_name, cmd, |
0fa0ee05 | 1430 | data->phy_id, data->reg_num, data->val_in, data->val_out); |
1da177e4 LT |
1431 | |
1432 | if (!local->mohawk) | |
1433 | return -EOPNOTSUPP; | |
1434 | ||
1435 | switch(cmd) { | |
1436 | case SIOCGMIIPHY: /* Get the address of the PHY in use. */ | |
0fa0ee05 | 1437 | data->phy_id = 0; /* we have only this address */ |
93b1fae4 | 1438 | /* fall through */ |
1da177e4 | 1439 | case SIOCGMIIREG: /* Read the specified MII register. */ |
0fa0ee05 BH |
1440 | data->val_out = mii_rd(ioaddr, data->phy_id & 0x1f, |
1441 | data->reg_num & 0x1f); | |
1da177e4 LT |
1442 | break; |
1443 | case SIOCSMIIREG: /* Write the specified MII register */ | |
0fa0ee05 BH |
1444 | mii_wr(ioaddr, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in, |
1445 | 16); | |
1da177e4 LT |
1446 | break; |
1447 | default: | |
1448 | return -EOPNOTSUPP; | |
1449 | } | |
1450 | return 0; | |
1451 | } | |
1452 | ||
1453 | static void | |
1454 | hardreset(struct net_device *dev) | |
1455 | { | |
f8653464 | 1456 | struct local_info *local = netdev_priv(dev); |
906da809 | 1457 | unsigned int ioaddr = dev->base_addr; |
1da177e4 LT |
1458 | |
1459 | SelectPage(4); | |
1460 | udelay(1); | |
1461 | PutByte(XIRCREG4_GPR1, 0); /* clear bit 0: power down */ | |
1462 | msleep(40); /* wait 40 msec */ | |
1463 | if (local->mohawk) | |
1464 | PutByte(XIRCREG4_GPR1, 1); /* set bit 0: power up */ | |
1465 | else | |
1466 | PutByte(XIRCREG4_GPR1, 1 | 4); /* set bit 0: power up, bit 2: AIC */ | |
1467 | msleep(20); /* wait 20 msec */ | |
1468 | } | |
1469 | ||
1470 | static void | |
1471 | do_reset(struct net_device *dev, int full) | |
1472 | { | |
f8653464 | 1473 | struct local_info *local = netdev_priv(dev); |
906da809 | 1474 | unsigned int ioaddr = dev->base_addr; |
1da177e4 LT |
1475 | unsigned value; |
1476 | ||
dd0fab5b | 1477 | pr_debug("%s: do_reset(%p,%d)\n", dev? dev->name:"eth?", dev, full); |
1da177e4 LT |
1478 | |
1479 | hardreset(dev); | |
1480 | PutByte(XIRCREG_CR, SoftReset); /* set */ | |
1481 | msleep(20); /* wait 20 msec */ | |
1482 | PutByte(XIRCREG_CR, 0); /* clear */ | |
1483 | msleep(40); /* wait 40 msec */ | |
1484 | if (local->mohawk) { | |
1485 | SelectPage(4); | |
1486 | /* set pin GP1 and GP2 to output (0x0c) | |
1487 | * set GP1 to low to power up the ML6692 (0x00) | |
1488 | * set GP2 to high to power up the 10Mhz chip (0x02) | |
1489 | */ | |
1490 | PutByte(XIRCREG4_GPR0, 0x0e); | |
1491 | } | |
1492 | ||
1493 | /* give the circuits some time to power up */ | |
1494 | msleep(500); /* about 500ms */ | |
1495 | ||
1496 | local->last_ptr_value = 0; | |
1497 | local->silicon = local->mohawk ? (GetByte(XIRCREG4_BOV) & 0x70) >> 4 | |
1498 | : (GetByte(XIRCREG4_BOV) & 0x30) >> 4; | |
1499 | ||
1500 | if (local->probe_port) { | |
1501 | if (!local->mohawk) { | |
1502 | SelectPage(4); | |
1503 | PutByte(XIRCREG4_GPR0, 4); | |
1504 | local->probe_port = 0; | |
1505 | } | |
1506 | } else if (dev->if_port == 2) { /* enable 10Base2 */ | |
1507 | SelectPage(0x42); | |
1508 | PutByte(XIRCREG42_SWC1, 0xC0); | |
1509 | } else { /* enable 10BaseT */ | |
1510 | SelectPage(0x42); | |
1511 | PutByte(XIRCREG42_SWC1, 0x80); | |
1512 | } | |
1513 | msleep(40); /* wait 40 msec to let it complete */ | |
1514 | ||
dd0fab5b DB |
1515 | #if 0 |
1516 | { | |
1da177e4 LT |
1517 | SelectPage(0); |
1518 | value = GetByte(XIRCREG_ESR); /* read the ESR */ | |
636b8116 | 1519 | pr_debug("%s: ESR is: %#02x\n", dev->name, value); |
1da177e4 LT |
1520 | } |
1521 | #endif | |
1522 | ||
1523 | /* setup the ECR */ | |
1524 | SelectPage(1); | |
1525 | PutByte(XIRCREG1_IMR0, 0xff); /* allow all ints */ | |
1526 | PutByte(XIRCREG1_IMR1, 1 ); /* and Set TxUnderrunDetect */ | |
1527 | value = GetByte(XIRCREG1_ECR); | |
1528 | #if 0 | |
1529 | if (local->mohawk) | |
1530 | value |= DisableLinkPulse; | |
1531 | PutByte(XIRCREG1_ECR, value); | |
1532 | #endif | |
dd0fab5b | 1533 | pr_debug("%s: ECR is: %#02x\n", dev->name, value); |
1da177e4 LT |
1534 | |
1535 | SelectPage(0x42); | |
1536 | PutByte(XIRCREG42_SWC0, 0x20); /* disable source insertion */ | |
1537 | ||
1538 | if (local->silicon != 1) { | |
1539 | /* set the local memory dividing line. | |
1540 | * The comments in the sample code say that this is only | |
1541 | * settable with the scipper version 2 which is revision 0. | |
1542 | * Always for CE3 cards | |
1543 | */ | |
1544 | SelectPage(2); | |
1545 | PutWord(XIRCREG2_RBS, 0x2000); | |
1546 | } | |
1547 | ||
1548 | if (full) | |
1549 | set_addresses(dev); | |
1550 | ||
1551 | /* Hardware workaround: | |
1552 | * The receive byte pointer after reset is off by 1 so we need | |
1553 | * to move the offset pointer back to 0. | |
1554 | */ | |
1555 | SelectPage(0); | |
1556 | PutWord(XIRCREG0_DO, 0x2000); /* change offset command, off=0 */ | |
1557 | ||
1558 | /* setup MAC IMRs and clear status registers */ | |
1559 | SelectPage(0x40); /* Bit 7 ... bit 0 */ | |
1560 | PutByte(XIRCREG40_RMASK0, 0xff); /* ROK, RAB, rsv, RO, CRC, AE, PTL, MP */ | |
1561 | PutByte(XIRCREG40_TMASK0, 0xff); /* TOK, TAB, SQE, LL, TU, JAB, EXC, CRS */ | |
1562 | PutByte(XIRCREG40_TMASK1, 0xb0); /* rsv, rsv, PTD, EXT, rsv,rsv,rsv, rsv*/ | |
1563 | PutByte(XIRCREG40_RXST0, 0x00); /* ROK, RAB, REN, RO, CRC, AE, PTL, MP */ | |
1564 | PutByte(XIRCREG40_TXST0, 0x00); /* TOK, TAB, SQE, LL, TU, JAB, EXC, CRS */ | |
1565 | PutByte(XIRCREG40_TXST1, 0x00); /* TEN, rsv, PTD, EXT, retry_counter:4 */ | |
1566 | ||
1567 | if (full && local->mohawk && init_mii(dev)) { | |
1568 | if (dev->if_port == 4 || local->dingo || local->new_mii) { | |
636b8116 | 1569 | netdev_info(dev, "MII selected\n"); |
1da177e4 LT |
1570 | SelectPage(2); |
1571 | PutByte(XIRCREG2_MSR, GetByte(XIRCREG2_MSR) | 0x08); | |
1572 | msleep(20); | |
1573 | } else { | |
636b8116 | 1574 | netdev_info(dev, "MII detected; using 10mbs\n"); |
1da177e4 LT |
1575 | SelectPage(0x42); |
1576 | if (dev->if_port == 2) /* enable 10Base2 */ | |
1577 | PutByte(XIRCREG42_SWC1, 0xC0); | |
1578 | else /* enable 10BaseT */ | |
1579 | PutByte(XIRCREG42_SWC1, 0x80); | |
1580 | msleep(40); /* wait 40 msec to let it complete */ | |
1581 | } | |
1582 | if (full_duplex) | |
1583 | PutByte(XIRCREG1_ECR, GetByte(XIRCREG1_ECR | FullDuplex)); | |
1584 | } else { /* No MII */ | |
1585 | SelectPage(0); | |
1586 | value = GetByte(XIRCREG_ESR); /* read the ESR */ | |
1587 | dev->if_port = (value & MediaSelect) ? 1 : 2; | |
1588 | } | |
1589 | ||
1590 | /* configure the LEDs */ | |
1591 | SelectPage(2); | |
1592 | if (dev->if_port == 1 || dev->if_port == 4) /* TP: Link and Activity */ | |
1593 | PutByte(XIRCREG2_LED, 0x3b); | |
1594 | else /* Coax: Not-Collision and Activity */ | |
1595 | PutByte(XIRCREG2_LED, 0x3a); | |
1596 | ||
1597 | if (local->dingo) | |
1598 | PutByte(0x0b, 0x04); /* 100 Mbit LED */ | |
1599 | ||
1600 | /* enable receiver and put the mac online */ | |
1601 | if (full) { | |
43fc63dc | 1602 | set_multicast_list(dev); |
1da177e4 LT |
1603 | SelectPage(0x40); |
1604 | PutByte(XIRCREG40_CMD0, EnableRecv | Online); | |
1605 | } | |
1606 | ||
1607 | /* setup Ethernet IMR and enable interrupts */ | |
1608 | SelectPage(1); | |
1609 | PutByte(XIRCREG1_IMR0, 0xff); | |
1610 | udelay(1); | |
1611 | SelectPage(0); | |
1612 | PutByte(XIRCREG_CR, EnableIntr); | |
1613 | if (local->modem && !local->dingo) { /* do some magic */ | |
1614 | if (!(GetByte(0x10) & 0x01)) | |
1615 | PutByte(0x10, 0x11); /* unmask master-int bit */ | |
1616 | } | |
1617 | ||
1618 | if (full) | |
636b8116 JP |
1619 | netdev_info(dev, "media %s, silicon revision %d\n", |
1620 | if_names[dev->if_port], local->silicon); | |
1da177e4 LT |
1621 | /* We should switch back to page 0 to avoid a bug in revision 0 |
1622 | * where regs with offset below 8 can't be read after an access | |
1623 | * to the MAC registers */ | |
1624 | SelectPage(0); | |
1625 | } | |
1626 | ||
1627 | /**************** | |
1628 | * Initialize the Media-Independent-Interface | |
1629 | * Returns: True if we have a good MII | |
1630 | */ | |
1631 | static int | |
1632 | init_mii(struct net_device *dev) | |
1633 | { | |
f8653464 | 1634 | struct local_info *local = netdev_priv(dev); |
906da809 | 1635 | unsigned int ioaddr = dev->base_addr; |
1da177e4 LT |
1636 | unsigned control, status, linkpartner; |
1637 | int i; | |
1638 | ||
1639 | if (if_port == 4 || if_port == 1) { /* force 100BaseT or 10BaseT */ | |
1640 | dev->if_port = if_port; | |
1641 | local->probe_port = 0; | |
1642 | return 1; | |
1643 | } | |
1644 | ||
1645 | status = mii_rd(ioaddr, 0, 1); | |
1646 | if ((status & 0xff00) != 0x7800) | |
1647 | return 0; /* No MII */ | |
1648 | ||
1649 | local->new_mii = (mii_rd(ioaddr, 0, 2) != 0xffff); | |
1650 | ||
1651 | if (local->probe_port) | |
1652 | control = 0x1000; /* auto neg */ | |
1653 | else if (dev->if_port == 4) | |
1654 | control = 0x2000; /* no auto neg, 100mbs mode */ | |
1655 | else | |
1656 | control = 0x0000; /* no auto neg, 10mbs mode */ | |
1657 | mii_wr(ioaddr, 0, 0, control, 16); | |
1658 | udelay(100); | |
1659 | control = mii_rd(ioaddr, 0, 0); | |
1660 | ||
1661 | if (control & 0x0400) { | |
636b8116 | 1662 | netdev_notice(dev, "can't take PHY out of isolation mode\n"); |
1da177e4 LT |
1663 | local->probe_port = 0; |
1664 | return 0; | |
1665 | } | |
1666 | ||
1667 | if (local->probe_port) { | |
1668 | /* according to the DP83840A specs the auto negotiation process | |
1669 | * may take up to 3.5 sec, so we use this also for our ML6692 | |
1670 | * Fixme: Better to use a timer here! | |
1671 | */ | |
1672 | for (i=0; i < 35; i++) { | |
1673 | msleep(100); /* wait 100 msec */ | |
1674 | status = mii_rd(ioaddr, 0, 1); | |
1675 | if ((status & 0x0020) && (status & 0x0004)) | |
1676 | break; | |
1677 | } | |
1678 | ||
1679 | if (!(status & 0x0020)) { | |
636b8116 | 1680 | netdev_info(dev, "autonegotiation failed; using 10mbs\n"); |
1da177e4 LT |
1681 | if (!local->new_mii) { |
1682 | control = 0x0000; | |
1683 | mii_wr(ioaddr, 0, 0, control, 16); | |
1684 | udelay(100); | |
1685 | SelectPage(0); | |
1686 | dev->if_port = (GetByte(XIRCREG_ESR) & MediaSelect) ? 1 : 2; | |
1687 | } | |
1688 | } else { | |
1689 | linkpartner = mii_rd(ioaddr, 0, 5); | |
636b8116 | 1690 | netdev_info(dev, "MII link partner: %04x\n", linkpartner); |
1da177e4 LT |
1691 | if (linkpartner & 0x0080) { |
1692 | dev->if_port = 4; | |
1693 | } else | |
1694 | dev->if_port = 1; | |
1695 | } | |
1696 | } | |
1697 | ||
1698 | return 1; | |
1699 | } | |
1700 | ||
1701 | static void | |
1702 | do_powerdown(struct net_device *dev) | |
1703 | { | |
1704 | ||
906da809 | 1705 | unsigned int ioaddr = dev->base_addr; |
1da177e4 | 1706 | |
dd0fab5b | 1707 | pr_debug("do_powerdown(%p)\n", dev); |
1da177e4 LT |
1708 | |
1709 | SelectPage(4); | |
1710 | PutByte(XIRCREG4_GPR1, 0); /* clear bit 0: power down */ | |
1711 | SelectPage(0); | |
1712 | } | |
1713 | ||
1714 | static int | |
1715 | do_stop(struct net_device *dev) | |
1716 | { | |
906da809 | 1717 | unsigned int ioaddr = dev->base_addr; |
f8653464 | 1718 | struct local_info *lp = netdev_priv(dev); |
fba395ee | 1719 | struct pcmcia_device *link = lp->p_dev; |
1da177e4 | 1720 | |
dd0fab5b | 1721 | dev_dbg(&link->dev, "do_stop(%p)\n", dev); |
1da177e4 LT |
1722 | |
1723 | if (!link) | |
1724 | return -ENODEV; | |
1725 | ||
1726 | netif_stop_queue(dev); | |
1727 | ||
1728 | SelectPage(0); | |
1729 | PutByte(XIRCREG_CR, 0); /* disable interrupts */ | |
1730 | SelectPage(0x01); | |
1731 | PutByte(XIRCREG1_IMR0, 0x00); /* forbid all ints */ | |
1732 | SelectPage(4); | |
1733 | PutByte(XIRCREG4_GPR1, 0); /* clear bit 0: power down */ | |
1734 | SelectPage(0); | |
1735 | ||
1736 | link->open--; | |
1737 | return 0; | |
1738 | } | |
1739 | ||
25f8f54f | 1740 | static const struct pcmcia_device_id xirc2ps_ids[] = { |
ff07bb19 DB |
1741 | PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0089, 0x110a), |
1742 | PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0138, 0x110a), | |
1743 | PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "CEM28", 0x2e3ee845, 0x0ea978ea), | |
1744 | PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "CEM33", 0x2e3ee845, 0x80609023), | |
1745 | PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "CEM56", 0x2e3ee845, 0xa650c32a), | |
1746 | PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "REM10", 0x2e3ee845, 0x76df1d29), | |
1747 | PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "XEM5600", 0x2e3ee845, 0xf1403719), | |
d277ad0e | 1748 | PCMCIA_PFC_DEVICE_PROD_ID12(0, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf), |
ff07bb19 DB |
1749 | PCMCIA_DEVICE_MANF_CARD(0x01bf, 0x010a), |
1750 | PCMCIA_DEVICE_PROD_ID13("Toshiba Information Systems", "TPCENET", 0x1b3b94fe, 0xf381c1a2), | |
1751 | PCMCIA_DEVICE_PROD_ID13("Xircom", "CE3-10/100", 0x2e3ee845, 0x0ec0ac37), | |
1752 | PCMCIA_DEVICE_PROD_ID13("Xircom", "PS-CE2-10", 0x2e3ee845, 0x947d9073), | |
1753 | PCMCIA_DEVICE_PROD_ID13("Xircom", "R2E-100BTX", 0x2e3ee845, 0x2464a6e3), | |
1754 | PCMCIA_DEVICE_PROD_ID13("Xircom", "RE-10", 0x2e3ee845, 0x3e08d609), | |
1755 | PCMCIA_DEVICE_PROD_ID13("Xircom", "XE2000", 0x2e3ee845, 0xf7188e46), | |
1756 | PCMCIA_DEVICE_PROD_ID12("Compaq", "Ethernet LAN Card", 0x54f7c49c, 0x9fd2f0a2), | |
1757 | PCMCIA_DEVICE_PROD_ID12("Compaq", "Netelligent 10/100 PC Card", 0x54f7c49c, 0xefe96769), | |
1758 | PCMCIA_DEVICE_PROD_ID12("Intel", "EtherExpress(TM) PRO/100 PC Card Mobile Adapter16", 0x816cc815, 0x174397db), | |
1759 | PCMCIA_DEVICE_PROD_ID12("Toshiba", "10/100 Ethernet PC Card", 0x44a09d9c, 0xb44deecf), | |
1760 | /* also matches CFE-10 cards! */ | |
1761 | /* PCMCIA_DEVICE_MANF_CARD(0x0105, 0x010a), */ | |
1762 | PCMCIA_DEVICE_NULL, | |
1763 | }; | |
1764 | MODULE_DEVICE_TABLE(pcmcia, xirc2ps_ids); | |
1765 | ||
1766 | ||
1da177e4 LT |
1767 | static struct pcmcia_driver xirc2ps_cs_driver = { |
1768 | .owner = THIS_MODULE, | |
2e9b981a | 1769 | .name = "xirc2ps_cs", |
15b99ac1 | 1770 | .probe = xirc2ps_probe, |
cc3b4866 | 1771 | .remove = xirc2ps_detach, |
ff07bb19 | 1772 | .id_table = xirc2ps_ids, |
98e4c28b DB |
1773 | .suspend = xirc2ps_suspend, |
1774 | .resume = xirc2ps_resume, | |
1da177e4 | 1775 | }; |
fdd3f29e | 1776 | module_pcmcia_driver(xirc2ps_cs_driver); |
1da177e4 LT |
1777 | |
1778 | #ifndef MODULE | |
1779 | static int __init setup_xirc2ps_cs(char *str) | |
1780 | { | |
1781 | /* if_port, full_duplex, do_sound, lockup_hack | |
1782 | */ | |
1783 | int ints[10] = { -1 }; | |
1784 | ||
1785 | str = get_options(str, 9, ints); | |
1786 | ||
1787 | #define MAYBE_SET(X,Y) if (ints[0] >= Y && ints[Y] != -1) { X = ints[Y]; } | |
1788 | MAYBE_SET(if_port, 3); | |
1789 | MAYBE_SET(full_duplex, 4); | |
1790 | MAYBE_SET(do_sound, 5); | |
1791 | MAYBE_SET(lockup_hack, 6); | |
1792 | #undef MAYBE_SET | |
1793 | ||
9b41046c | 1794 | return 1; |
1da177e4 LT |
1795 | } |
1796 | ||
1797 | __setup("xirc2ps_cs=", setup_xirc2ps_cs); | |
1798 | #endif |