Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * This file is subject to the terms and conditions of the GNU General Public | |
3 | * License. See the file "COPYING" in the main directory of this archive | |
4 | * for more details. | |
5 | * | |
6 | * Driver for SGI's IOC3 based Ethernet cards as found in the PCI card. | |
7 | * | |
bbfb86c5 | 8 | * Copyright (C) 1999, 2000, 01, 03, 06 Ralf Baechle |
1da177e4 LT |
9 | * Copyright (C) 1995, 1999, 2000, 2001 by Silicon Graphics, Inc. |
10 | * | |
11 | * References: | |
12 | * o IOC3 ASIC specification 4.51, 1996-04-18 | |
13 | * o IEEE 802.3 specification, 2000 edition | |
14 | * o DP38840A Specification, National Semiconductor, March 1997 | |
15 | * | |
16 | * To do: | |
17 | * | |
18 | * o Handle allocation failures in ioc3_alloc_skb() more gracefully. | |
19 | * o Handle allocation failures in ioc3_init_rings(). | |
20 | * o Use prefetching for large packets. What is a good lower limit for | |
21 | * prefetching? | |
22 | * o We're probably allocating a bit too much memory. | |
23 | * o Use hardware checksums. | |
24 | * o Convert to using a IOC3 meta driver. | |
25 | * o Which PHYs might possibly be attached to the IOC3 in real live, | |
26 | * which workarounds are required for them? Do we ever have Lucent's? | |
27 | * o For the 2.5 branch kill the mii-tool ioctls. | |
28 | */ | |
29 | ||
30 | #define IOC3_NAME "ioc3-eth" | |
d5b20697 | 31 | #define IOC3_VERSION "2.6.3-4" |
1da177e4 | 32 | |
1da177e4 LT |
33 | #include <linux/init.h> |
34 | #include <linux/delay.h> | |
35 | #include <linux/kernel.h> | |
36 | #include <linux/mm.h> | |
37 | #include <linux/errno.h> | |
38 | #include <linux/module.h> | |
39 | #include <linux/pci.h> | |
40 | #include <linux/crc32.h> | |
41 | #include <linux/mii.h> | |
42 | #include <linux/in.h> | |
43 | #include <linux/ip.h> | |
44 | #include <linux/tcp.h> | |
45 | #include <linux/udp.h> | |
910638ae | 46 | #include <linux/dma-mapping.h> |
1da177e4 LT |
47 | |
48 | #ifdef CONFIG_SERIAL_8250 | |
15a93807 RB |
49 | #include <linux/serial_core.h> |
50 | #include <linux/serial_8250.h> | |
0491d1f3 | 51 | #include <linux/serial_reg.h> |
1da177e4 LT |
52 | #endif |
53 | ||
54 | #include <linux/netdevice.h> | |
55 | #include <linux/etherdevice.h> | |
56 | #include <linux/ethtool.h> | |
57 | #include <linux/skbuff.h> | |
58 | #include <net/ip.h> | |
59 | ||
60 | #include <asm/byteorder.h> | |
1da177e4 LT |
61 | #include <asm/io.h> |
62 | #include <asm/pgtable.h> | |
63 | #include <asm/uaccess.h> | |
64 | #include <asm/sn/types.h> | |
1da177e4 | 65 | #include <asm/sn/ioc3.h> |
1da177e4 LT |
66 | #include <asm/pci/bridge.h> |
67 | ||
68 | /* | |
69 | * 64 RX buffers. This is tunable in the range of 16 <= x < 512. The | |
70 | * value must be a power of two. | |
71 | */ | |
72 | #define RX_BUFFS 64 | |
73 | ||
74 | #define ETCSR_FD ((17<<ETCSR_IPGR2_SHIFT) | (11<<ETCSR_IPGR1_SHIFT) | 21) | |
75 | #define ETCSR_HD ((21<<ETCSR_IPGR2_SHIFT) | (21<<ETCSR_IPGR1_SHIFT) | 21) | |
76 | ||
77 | /* Private per NIC data of the driver. */ | |
78 | struct ioc3_private { | |
79 | struct ioc3 *regs; | |
80 | unsigned long *rxr; /* pointer to receiver ring */ | |
81 | struct ioc3_etxd *txr; | |
82 | struct sk_buff *rx_skbs[512]; | |
83 | struct sk_buff *tx_skbs[128]; | |
84 | struct net_device_stats stats; | |
85 | int rx_ci; /* RX consumer index */ | |
86 | int rx_pi; /* RX producer index */ | |
87 | int tx_ci; /* TX consumer index */ | |
88 | int tx_pi; /* TX producer index */ | |
89 | int txqlen; | |
90 | u32 emcr, ehar_h, ehar_l; | |
91 | spinlock_t ioc3_lock; | |
92 | struct mii_if_info mii; | |
bbfb86c5 RB |
93 | unsigned long flags; |
94 | #define IOC3_FLAG_RX_CHECKSUMS 1 | |
95 | ||
1da177e4 LT |
96 | struct pci_dev *pdev; |
97 | ||
98 | /* Members used by autonegotiation */ | |
99 | struct timer_list ioc3_timer; | |
100 | }; | |
101 | ||
102 | static inline struct net_device *priv_netdev(struct ioc3_private *dev) | |
103 | { | |
104 | return (void *)dev - ((sizeof(struct net_device) + 31) & ~31); | |
105 | } | |
106 | ||
107 | static int ioc3_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); | |
108 | static void ioc3_set_multicast_list(struct net_device *dev); | |
109 | static int ioc3_start_xmit(struct sk_buff *skb, struct net_device *dev); | |
110 | static void ioc3_timeout(struct net_device *dev); | |
111 | static inline unsigned int ioc3_hash(const unsigned char *addr); | |
112 | static inline void ioc3_stop(struct ioc3_private *ip); | |
113 | static void ioc3_init(struct net_device *dev); | |
114 | ||
115 | static const char ioc3_str[] = "IOC3 Ethernet"; | |
7282d491 | 116 | static const struct ethtool_ops ioc3_ethtool_ops; |
1da177e4 LT |
117 | |
118 | /* We use this to acquire receive skb's that we can DMA directly into. */ | |
119 | ||
120 | #define IOC3_CACHELINE 128UL | |
121 | ||
122 | static inline unsigned long aligned_rx_skb_addr(unsigned long addr) | |
123 | { | |
124 | return (~addr + 1) & (IOC3_CACHELINE - 1UL); | |
125 | } | |
126 | ||
127 | static inline struct sk_buff * ioc3_alloc_skb(unsigned long length, | |
128 | unsigned int gfp_mask) | |
129 | { | |
130 | struct sk_buff *skb; | |
131 | ||
132 | skb = alloc_skb(length + IOC3_CACHELINE - 1, gfp_mask); | |
133 | if (likely(skb)) { | |
134 | int offset = aligned_rx_skb_addr((unsigned long) skb->data); | |
135 | if (offset) | |
136 | skb_reserve(skb, offset); | |
137 | } | |
138 | ||
139 | return skb; | |
140 | } | |
141 | ||
142 | static inline unsigned long ioc3_map(void *ptr, unsigned long vdev) | |
143 | { | |
144 | #ifdef CONFIG_SGI_IP27 | |
d955d90b | 145 | vdev <<= 57; /* Shift to PCI64_ATTR_VIRTUAL */ |
1da177e4 LT |
146 | |
147 | return vdev | (0xaUL << PCI64_ATTR_TARG_SHFT) | PCI64_ATTR_PREF | | |
148 | ((unsigned long)ptr & TO_PHYS_MASK); | |
149 | #else | |
150 | return virt_to_bus(ptr); | |
151 | #endif | |
152 | } | |
153 | ||
154 | /* BEWARE: The IOC3 documentation documents the size of rx buffers as | |
155 | 1644 while it's actually 1664. This one was nasty to track down ... */ | |
156 | #define RX_OFFSET 10 | |
157 | #define RX_BUF_ALLOC_SIZE (1664 + RX_OFFSET + IOC3_CACHELINE) | |
158 | ||
159 | /* DMA barrier to separate cached and uncached accesses. */ | |
160 | #define BARRIER() \ | |
161 | __asm__("sync" ::: "memory") | |
162 | ||
163 | ||
164 | #define IOC3_SIZE 0x100000 | |
165 | ||
166 | /* | |
167 | * IOC3 is a big endian device | |
168 | * | |
169 | * Unorthodox but makes the users of these macros more readable - the pointer | |
170 | * to the IOC3's memory mapped registers is expected as struct ioc3 * ioc3 | |
171 | * in the environment. | |
172 | */ | |
173 | #define ioc3_r_mcr() be32_to_cpu(ioc3->mcr) | |
174 | #define ioc3_w_mcr(v) do { ioc3->mcr = cpu_to_be32(v); } while (0) | |
175 | #define ioc3_w_gpcr_s(v) do { ioc3->gpcr_s = cpu_to_be32(v); } while (0) | |
176 | #define ioc3_r_emcr() be32_to_cpu(ioc3->emcr) | |
177 | #define ioc3_w_emcr(v) do { ioc3->emcr = cpu_to_be32(v); } while (0) | |
178 | #define ioc3_r_eisr() be32_to_cpu(ioc3->eisr) | |
179 | #define ioc3_w_eisr(v) do { ioc3->eisr = cpu_to_be32(v); } while (0) | |
180 | #define ioc3_r_eier() be32_to_cpu(ioc3->eier) | |
181 | #define ioc3_w_eier(v) do { ioc3->eier = cpu_to_be32(v); } while (0) | |
182 | #define ioc3_r_ercsr() be32_to_cpu(ioc3->ercsr) | |
183 | #define ioc3_w_ercsr(v) do { ioc3->ercsr = cpu_to_be32(v); } while (0) | |
184 | #define ioc3_r_erbr_h() be32_to_cpu(ioc3->erbr_h) | |
185 | #define ioc3_w_erbr_h(v) do { ioc3->erbr_h = cpu_to_be32(v); } while (0) | |
186 | #define ioc3_r_erbr_l() be32_to_cpu(ioc3->erbr_l) | |
187 | #define ioc3_w_erbr_l(v) do { ioc3->erbr_l = cpu_to_be32(v); } while (0) | |
188 | #define ioc3_r_erbar() be32_to_cpu(ioc3->erbar) | |
189 | #define ioc3_w_erbar(v) do { ioc3->erbar = cpu_to_be32(v); } while (0) | |
190 | #define ioc3_r_ercir() be32_to_cpu(ioc3->ercir) | |
191 | #define ioc3_w_ercir(v) do { ioc3->ercir = cpu_to_be32(v); } while (0) | |
192 | #define ioc3_r_erpir() be32_to_cpu(ioc3->erpir) | |
193 | #define ioc3_w_erpir(v) do { ioc3->erpir = cpu_to_be32(v); } while (0) | |
194 | #define ioc3_r_ertr() be32_to_cpu(ioc3->ertr) | |
195 | #define ioc3_w_ertr(v) do { ioc3->ertr = cpu_to_be32(v); } while (0) | |
196 | #define ioc3_r_etcsr() be32_to_cpu(ioc3->etcsr) | |
197 | #define ioc3_w_etcsr(v) do { ioc3->etcsr = cpu_to_be32(v); } while (0) | |
198 | #define ioc3_r_ersr() be32_to_cpu(ioc3->ersr) | |
199 | #define ioc3_w_ersr(v) do { ioc3->ersr = cpu_to_be32(v); } while (0) | |
200 | #define ioc3_r_etcdc() be32_to_cpu(ioc3->etcdc) | |
201 | #define ioc3_w_etcdc(v) do { ioc3->etcdc = cpu_to_be32(v); } while (0) | |
202 | #define ioc3_r_ebir() be32_to_cpu(ioc3->ebir) | |
203 | #define ioc3_w_ebir(v) do { ioc3->ebir = cpu_to_be32(v); } while (0) | |
204 | #define ioc3_r_etbr_h() be32_to_cpu(ioc3->etbr_h) | |
205 | #define ioc3_w_etbr_h(v) do { ioc3->etbr_h = cpu_to_be32(v); } while (0) | |
206 | #define ioc3_r_etbr_l() be32_to_cpu(ioc3->etbr_l) | |
207 | #define ioc3_w_etbr_l(v) do { ioc3->etbr_l = cpu_to_be32(v); } while (0) | |
208 | #define ioc3_r_etcir() be32_to_cpu(ioc3->etcir) | |
209 | #define ioc3_w_etcir(v) do { ioc3->etcir = cpu_to_be32(v); } while (0) | |
210 | #define ioc3_r_etpir() be32_to_cpu(ioc3->etpir) | |
211 | #define ioc3_w_etpir(v) do { ioc3->etpir = cpu_to_be32(v); } while (0) | |
212 | #define ioc3_r_emar_h() be32_to_cpu(ioc3->emar_h) | |
213 | #define ioc3_w_emar_h(v) do { ioc3->emar_h = cpu_to_be32(v); } while (0) | |
214 | #define ioc3_r_emar_l() be32_to_cpu(ioc3->emar_l) | |
215 | #define ioc3_w_emar_l(v) do { ioc3->emar_l = cpu_to_be32(v); } while (0) | |
216 | #define ioc3_r_ehar_h() be32_to_cpu(ioc3->ehar_h) | |
217 | #define ioc3_w_ehar_h(v) do { ioc3->ehar_h = cpu_to_be32(v); } while (0) | |
218 | #define ioc3_r_ehar_l() be32_to_cpu(ioc3->ehar_l) | |
219 | #define ioc3_w_ehar_l(v) do { ioc3->ehar_l = cpu_to_be32(v); } while (0) | |
220 | #define ioc3_r_micr() be32_to_cpu(ioc3->micr) | |
221 | #define ioc3_w_micr(v) do { ioc3->micr = cpu_to_be32(v); } while (0) | |
222 | #define ioc3_r_midr_r() be32_to_cpu(ioc3->midr_r) | |
223 | #define ioc3_w_midr_r(v) do { ioc3->midr_r = cpu_to_be32(v); } while (0) | |
224 | #define ioc3_r_midr_w() be32_to_cpu(ioc3->midr_w) | |
225 | #define ioc3_w_midr_w(v) do { ioc3->midr_w = cpu_to_be32(v); } while (0) | |
226 | ||
227 | static inline u32 mcr_pack(u32 pulse, u32 sample) | |
228 | { | |
229 | return (pulse << 10) | (sample << 2); | |
230 | } | |
231 | ||
232 | static int nic_wait(struct ioc3 *ioc3) | |
233 | { | |
234 | u32 mcr; | |
235 | ||
236 | do { | |
237 | mcr = ioc3_r_mcr(); | |
238 | } while (!(mcr & 2)); | |
239 | ||
240 | return mcr & 1; | |
241 | } | |
242 | ||
243 | static int nic_reset(struct ioc3 *ioc3) | |
244 | { | |
245 | int presence; | |
246 | ||
247 | ioc3_w_mcr(mcr_pack(500, 65)); | |
248 | presence = nic_wait(ioc3); | |
249 | ||
250 | ioc3_w_mcr(mcr_pack(0, 500)); | |
251 | nic_wait(ioc3); | |
252 | ||
253 | return presence; | |
254 | } | |
255 | ||
256 | static inline int nic_read_bit(struct ioc3 *ioc3) | |
257 | { | |
258 | int result; | |
259 | ||
260 | ioc3_w_mcr(mcr_pack(6, 13)); | |
261 | result = nic_wait(ioc3); | |
262 | ioc3_w_mcr(mcr_pack(0, 100)); | |
263 | nic_wait(ioc3); | |
264 | ||
265 | return result; | |
266 | } | |
267 | ||
268 | static inline void nic_write_bit(struct ioc3 *ioc3, int bit) | |
269 | { | |
270 | if (bit) | |
271 | ioc3_w_mcr(mcr_pack(6, 110)); | |
272 | else | |
273 | ioc3_w_mcr(mcr_pack(80, 30)); | |
274 | ||
275 | nic_wait(ioc3); | |
276 | } | |
277 | ||
278 | /* | |
279 | * Read a byte from an iButton device | |
280 | */ | |
281 | static u32 nic_read_byte(struct ioc3 *ioc3) | |
282 | { | |
283 | u32 result = 0; | |
284 | int i; | |
285 | ||
286 | for (i = 0; i < 8; i++) | |
287 | result = (result >> 1) | (nic_read_bit(ioc3) << 7); | |
288 | ||
289 | return result; | |
290 | } | |
291 | ||
292 | /* | |
293 | * Write a byte to an iButton device | |
294 | */ | |
295 | static void nic_write_byte(struct ioc3 *ioc3, int byte) | |
296 | { | |
297 | int i, bit; | |
298 | ||
299 | for (i = 8; i; i--) { | |
300 | bit = byte & 1; | |
301 | byte >>= 1; | |
302 | ||
303 | nic_write_bit(ioc3, bit); | |
304 | } | |
305 | } | |
306 | ||
307 | static u64 nic_find(struct ioc3 *ioc3, int *last) | |
308 | { | |
309 | int a, b, index, disc; | |
310 | u64 address = 0; | |
311 | ||
312 | nic_reset(ioc3); | |
313 | /* Search ROM. */ | |
314 | nic_write_byte(ioc3, 0xf0); | |
315 | ||
316 | /* Algorithm from ``Book of iButton Standards''. */ | |
317 | for (index = 0, disc = 0; index < 64; index++) { | |
318 | a = nic_read_bit(ioc3); | |
319 | b = nic_read_bit(ioc3); | |
320 | ||
321 | if (a && b) { | |
322 | printk("NIC search failed (not fatal).\n"); | |
323 | *last = 0; | |
324 | return 0; | |
325 | } | |
326 | ||
327 | if (!a && !b) { | |
328 | if (index == *last) { | |
329 | address |= 1UL << index; | |
330 | } else if (index > *last) { | |
331 | address &= ~(1UL << index); | |
332 | disc = index; | |
333 | } else if ((address & (1UL << index)) == 0) | |
334 | disc = index; | |
335 | nic_write_bit(ioc3, address & (1UL << index)); | |
336 | continue; | |
337 | } else { | |
338 | if (a) | |
339 | address |= 1UL << index; | |
340 | else | |
341 | address &= ~(1UL << index); | |
342 | nic_write_bit(ioc3, a); | |
343 | continue; | |
344 | } | |
345 | } | |
346 | ||
347 | *last = disc; | |
348 | ||
349 | return address; | |
350 | } | |
351 | ||
352 | static int nic_init(struct ioc3 *ioc3) | |
353 | { | |
f49343a5 AC |
354 | const char *unknown = "unknown"; |
355 | const char *type = unknown; | |
1da177e4 LT |
356 | u8 crc; |
357 | u8 serial[6]; | |
358 | int save = 0, i; | |
359 | ||
1da177e4 LT |
360 | while (1) { |
361 | u64 reg; | |
362 | reg = nic_find(ioc3, &save); | |
363 | ||
364 | switch (reg & 0xff) { | |
365 | case 0x91: | |
366 | type = "DS1981U"; | |
367 | break; | |
368 | default: | |
369 | if (save == 0) { | |
370 | /* Let the caller try again. */ | |
371 | return -1; | |
372 | } | |
373 | continue; | |
374 | } | |
375 | ||
376 | nic_reset(ioc3); | |
377 | ||
378 | /* Match ROM. */ | |
379 | nic_write_byte(ioc3, 0x55); | |
380 | for (i = 0; i < 8; i++) | |
381 | nic_write_byte(ioc3, (reg >> (i << 3)) & 0xff); | |
382 | ||
383 | reg >>= 8; /* Shift out type. */ | |
384 | for (i = 0; i < 6; i++) { | |
385 | serial[i] = reg & 0xff; | |
386 | reg >>= 8; | |
387 | } | |
388 | crc = reg & 0xff; | |
389 | break; | |
390 | } | |
391 | ||
392 | printk("Found %s NIC", type); | |
f49343a5 | 393 | if (type != unknown) { |
1da177e4 LT |
394 | printk (" registration number %02x:%02x:%02x:%02x:%02x:%02x," |
395 | " CRC %02x", serial[0], serial[1], serial[2], | |
396 | serial[3], serial[4], serial[5], crc); | |
397 | } | |
398 | printk(".\n"); | |
399 | ||
400 | return 0; | |
401 | } | |
402 | ||
403 | /* | |
404 | * Read the NIC (Number-In-a-Can) device used to store the MAC address on | |
405 | * SN0 / SN00 nodeboards and PCI cards. | |
406 | */ | |
407 | static void ioc3_get_eaddr_nic(struct ioc3_private *ip) | |
408 | { | |
409 | struct ioc3 *ioc3 = ip->regs; | |
410 | u8 nic[14]; | |
411 | int tries = 2; /* There may be some problem with the battery? */ | |
412 | int i; | |
413 | ||
414 | ioc3_w_gpcr_s(1 << 21); | |
415 | ||
416 | while (tries--) { | |
417 | if (!nic_init(ioc3)) | |
418 | break; | |
419 | udelay(500); | |
420 | } | |
421 | ||
422 | if (tries < 0) { | |
423 | printk("Failed to read MAC address\n"); | |
424 | return; | |
425 | } | |
426 | ||
427 | /* Read Memory. */ | |
428 | nic_write_byte(ioc3, 0xf0); | |
429 | nic_write_byte(ioc3, 0x00); | |
430 | nic_write_byte(ioc3, 0x00); | |
431 | ||
432 | for (i = 13; i >= 0; i--) | |
433 | nic[i] = nic_read_byte(ioc3); | |
434 | ||
435 | for (i = 2; i < 8; i++) | |
436 | priv_netdev(ip)->dev_addr[i - 2] = nic[i]; | |
437 | } | |
438 | ||
439 | /* | |
440 | * Ok, this is hosed by design. It's necessary to know what machine the | |
441 | * NIC is in in order to know how to read the NIC address. We also have | |
442 | * to know if it's a PCI card or a NIC in on the node board ... | |
443 | */ | |
444 | static void ioc3_get_eaddr(struct ioc3_private *ip) | |
445 | { | |
446 | int i; | |
447 | ||
448 | ||
449 | ioc3_get_eaddr_nic(ip); | |
450 | ||
451 | printk("Ethernet address is "); | |
452 | for (i = 0; i < 6; i++) { | |
453 | printk("%02x", priv_netdev(ip)->dev_addr[i]); | |
454 | if (i < 5) | |
455 | printk(":"); | |
456 | } | |
457 | printk(".\n"); | |
458 | } | |
459 | ||
460 | static void __ioc3_set_mac_address(struct net_device *dev) | |
461 | { | |
462 | struct ioc3_private *ip = netdev_priv(dev); | |
463 | struct ioc3 *ioc3 = ip->regs; | |
464 | ||
465 | ioc3_w_emar_h((dev->dev_addr[5] << 8) | dev->dev_addr[4]); | |
466 | ioc3_w_emar_l((dev->dev_addr[3] << 24) | (dev->dev_addr[2] << 16) | | |
467 | (dev->dev_addr[1] << 8) | dev->dev_addr[0]); | |
468 | } | |
469 | ||
470 | static int ioc3_set_mac_address(struct net_device *dev, void *addr) | |
471 | { | |
472 | struct ioc3_private *ip = netdev_priv(dev); | |
473 | struct sockaddr *sa = addr; | |
474 | ||
475 | memcpy(dev->dev_addr, sa->sa_data, dev->addr_len); | |
476 | ||
477 | spin_lock_irq(&ip->ioc3_lock); | |
478 | __ioc3_set_mac_address(dev); | |
479 | spin_unlock_irq(&ip->ioc3_lock); | |
480 | ||
481 | return 0; | |
482 | } | |
483 | ||
484 | /* | |
485 | * Caller must hold the ioc3_lock ever for MII readers. This is also | |
486 | * used to protect the transmitter side but it's low contention. | |
487 | */ | |
488 | static int ioc3_mdio_read(struct net_device *dev, int phy, int reg) | |
489 | { | |
490 | struct ioc3_private *ip = netdev_priv(dev); | |
491 | struct ioc3 *ioc3 = ip->regs; | |
492 | ||
493 | while (ioc3_r_micr() & MICR_BUSY); | |
494 | ioc3_w_micr((phy << MICR_PHYADDR_SHIFT) | reg | MICR_READTRIG); | |
495 | while (ioc3_r_micr() & MICR_BUSY); | |
496 | ||
852ea22a | 497 | return ioc3_r_midr_r() & MIDR_DATA_MASK; |
1da177e4 LT |
498 | } |
499 | ||
500 | static void ioc3_mdio_write(struct net_device *dev, int phy, int reg, int data) | |
501 | { | |
502 | struct ioc3_private *ip = netdev_priv(dev); | |
503 | struct ioc3 *ioc3 = ip->regs; | |
504 | ||
505 | while (ioc3_r_micr() & MICR_BUSY); | |
506 | ioc3_w_midr_w(data); | |
507 | ioc3_w_micr((phy << MICR_PHYADDR_SHIFT) | reg); | |
508 | while (ioc3_r_micr() & MICR_BUSY); | |
509 | } | |
510 | ||
511 | static int ioc3_mii_init(struct ioc3_private *ip); | |
512 | ||
513 | static struct net_device_stats *ioc3_get_stats(struct net_device *dev) | |
514 | { | |
515 | struct ioc3_private *ip = netdev_priv(dev); | |
516 | struct ioc3 *ioc3 = ip->regs; | |
517 | ||
518 | ip->stats.collisions += (ioc3_r_etcdc() & ETCDC_COLLCNT_MASK); | |
519 | return &ip->stats; | |
520 | } | |
521 | ||
1da177e4 LT |
522 | static void ioc3_tcpudp_checksum(struct sk_buff *skb, uint32_t hwsum, int len) |
523 | { | |
524 | struct ethhdr *eh = eth_hdr(skb); | |
525 | uint32_t csum, ehsum; | |
526 | unsigned int proto; | |
527 | struct iphdr *ih; | |
528 | uint16_t *ew; | |
529 | unsigned char *cp; | |
530 | ||
531 | /* | |
532 | * Did hardware handle the checksum at all? The cases we can handle | |
533 | * are: | |
534 | * | |
535 | * - TCP and UDP checksums of IPv4 only. | |
536 | * - IPv6 would be doable but we keep that for later ... | |
537 | * - Only unfragmented packets. Did somebody already tell you | |
538 | * fragmentation is evil? | |
539 | * - don't care about packet size. Worst case when processing a | |
540 | * malformed packet we'll try to access the packet at ip header + | |
541 | * 64 bytes which is still inside the skb. Even in the unlikely | |
542 | * case where the checksum is right the higher layers will still | |
543 | * drop the packet as appropriate. | |
544 | */ | |
545 | if (eh->h_proto != ntohs(ETH_P_IP)) | |
546 | return; | |
547 | ||
548 | ih = (struct iphdr *) ((char *)eh + ETH_HLEN); | |
549 | if (ih->frag_off & htons(IP_MF | IP_OFFSET)) | |
550 | return; | |
551 | ||
552 | proto = ih->protocol; | |
553 | if (proto != IPPROTO_TCP && proto != IPPROTO_UDP) | |
554 | return; | |
555 | ||
556 | /* Same as tx - compute csum of pseudo header */ | |
557 | csum = hwsum + | |
558 | (ih->tot_len - (ih->ihl << 2)) + | |
559 | htons((uint16_t)ih->protocol) + | |
560 | (ih->saddr >> 16) + (ih->saddr & 0xffff) + | |
561 | (ih->daddr >> 16) + (ih->daddr & 0xffff); | |
562 | ||
563 | /* Sum up ethernet dest addr, src addr and protocol */ | |
564 | ew = (uint16_t *) eh; | |
565 | ehsum = ew[0] + ew[1] + ew[2] + ew[3] + ew[4] + ew[5] + ew[6]; | |
566 | ||
567 | ehsum = (ehsum & 0xffff) + (ehsum >> 16); | |
568 | ehsum = (ehsum & 0xffff) + (ehsum >> 16); | |
569 | ||
570 | csum += 0xffff ^ ehsum; | |
571 | ||
572 | /* In the next step we also subtract the 1's complement | |
573 | checksum of the trailing ethernet CRC. */ | |
574 | cp = (char *)eh + len; /* points at trailing CRC */ | |
575 | if (len & 1) { | |
576 | csum += 0xffff ^ (uint16_t) ((cp[1] << 8) | cp[0]); | |
577 | csum += 0xffff ^ (uint16_t) ((cp[3] << 8) | cp[2]); | |
578 | } else { | |
579 | csum += 0xffff ^ (uint16_t) ((cp[0] << 8) | cp[1]); | |
580 | csum += 0xffff ^ (uint16_t) ((cp[2] << 8) | cp[3]); | |
581 | } | |
582 | ||
583 | csum = (csum & 0xffff) + (csum >> 16); | |
584 | csum = (csum & 0xffff) + (csum >> 16); | |
585 | ||
586 | if (csum == 0xffff) | |
587 | skb->ip_summed = CHECKSUM_UNNECESSARY; | |
588 | } | |
1da177e4 LT |
589 | |
590 | static inline void ioc3_rx(struct ioc3_private *ip) | |
591 | { | |
592 | struct sk_buff *skb, *new_skb; | |
593 | struct ioc3 *ioc3 = ip->regs; | |
594 | int rx_entry, n_entry, len; | |
595 | struct ioc3_erxbuf *rxb; | |
596 | unsigned long *rxr; | |
597 | u32 w0, err; | |
598 | ||
599 | rxr = (unsigned long *) ip->rxr; /* Ring base */ | |
600 | rx_entry = ip->rx_ci; /* RX consume index */ | |
601 | n_entry = ip->rx_pi; | |
602 | ||
603 | skb = ip->rx_skbs[rx_entry]; | |
604 | rxb = (struct ioc3_erxbuf *) (skb->data - RX_OFFSET); | |
605 | w0 = be32_to_cpu(rxb->w0); | |
606 | ||
607 | while (w0 & ERXBUF_V) { | |
608 | err = be32_to_cpu(rxb->err); /* It's valid ... */ | |
609 | if (err & ERXBUF_GOODPKT) { | |
610 | len = ((w0 >> ERXBUF_BYTECNT_SHIFT) & 0x7ff) - 4; | |
611 | skb_trim(skb, len); | |
612 | skb->protocol = eth_type_trans(skb, priv_netdev(ip)); | |
613 | ||
614 | new_skb = ioc3_alloc_skb(RX_BUF_ALLOC_SIZE, GFP_ATOMIC); | |
615 | if (!new_skb) { | |
616 | /* Ouch, drop packet and just recycle packet | |
617 | to keep the ring filled. */ | |
618 | ip->stats.rx_dropped++; | |
619 | new_skb = skb; | |
620 | goto next; | |
621 | } | |
622 | ||
bbfb86c5 RB |
623 | if (likely(ip->flags & IOC3_FLAG_RX_CHECKSUMS)) |
624 | ioc3_tcpudp_checksum(skb, | |
625 | w0 & ERXBUF_IPCKSUM_MASK, len); | |
1da177e4 LT |
626 | |
627 | netif_rx(skb); | |
628 | ||
629 | ip->rx_skbs[rx_entry] = NULL; /* Poison */ | |
630 | ||
1da177e4 LT |
631 | /* Because we reserve afterwards. */ |
632 | skb_put(new_skb, (1664 + RX_OFFSET)); | |
633 | rxb = (struct ioc3_erxbuf *) new_skb->data; | |
634 | skb_reserve(new_skb, RX_OFFSET); | |
635 | ||
636 | priv_netdev(ip)->last_rx = jiffies; | |
637 | ip->stats.rx_packets++; /* Statistics */ | |
638 | ip->stats.rx_bytes += len; | |
639 | } else { | |
640 | /* The frame is invalid and the skb never | |
641 | reached the network layer so we can just | |
642 | recycle it. */ | |
643 | new_skb = skb; | |
644 | ip->stats.rx_errors++; | |
645 | } | |
646 | if (err & ERXBUF_CRCERR) /* Statistics */ | |
647 | ip->stats.rx_crc_errors++; | |
648 | if (err & ERXBUF_FRAMERR) | |
649 | ip->stats.rx_frame_errors++; | |
650 | next: | |
651 | ip->rx_skbs[n_entry] = new_skb; | |
652 | rxr[n_entry] = cpu_to_be64(ioc3_map(rxb, 1)); | |
653 | rxb->w0 = 0; /* Clear valid flag */ | |
654 | n_entry = (n_entry + 1) & 511; /* Update erpir */ | |
655 | ||
656 | /* Now go on to the next ring entry. */ | |
657 | rx_entry = (rx_entry + 1) & 511; | |
658 | skb = ip->rx_skbs[rx_entry]; | |
659 | rxb = (struct ioc3_erxbuf *) (skb->data - RX_OFFSET); | |
660 | w0 = be32_to_cpu(rxb->w0); | |
661 | } | |
662 | ioc3_w_erpir((n_entry << 3) | ERPIR_ARM); | |
663 | ip->rx_pi = n_entry; | |
664 | ip->rx_ci = rx_entry; | |
665 | } | |
666 | ||
667 | static inline void ioc3_tx(struct ioc3_private *ip) | |
668 | { | |
669 | unsigned long packets, bytes; | |
670 | struct ioc3 *ioc3 = ip->regs; | |
671 | int tx_entry, o_entry; | |
672 | struct sk_buff *skb; | |
673 | u32 etcir; | |
674 | ||
675 | spin_lock(&ip->ioc3_lock); | |
676 | etcir = ioc3_r_etcir(); | |
677 | ||
678 | tx_entry = (etcir >> 7) & 127; | |
679 | o_entry = ip->tx_ci; | |
680 | packets = 0; | |
681 | bytes = 0; | |
682 | ||
683 | while (o_entry != tx_entry) { | |
684 | packets++; | |
685 | skb = ip->tx_skbs[o_entry]; | |
686 | bytes += skb->len; | |
687 | dev_kfree_skb_irq(skb); | |
688 | ip->tx_skbs[o_entry] = NULL; | |
689 | ||
690 | o_entry = (o_entry + 1) & 127; /* Next */ | |
691 | ||
692 | etcir = ioc3_r_etcir(); /* More pkts sent? */ | |
693 | tx_entry = (etcir >> 7) & 127; | |
694 | } | |
695 | ||
696 | ip->stats.tx_packets += packets; | |
697 | ip->stats.tx_bytes += bytes; | |
698 | ip->txqlen -= packets; | |
699 | ||
700 | if (ip->txqlen < 128) | |
701 | netif_wake_queue(priv_netdev(ip)); | |
702 | ||
703 | ip->tx_ci = o_entry; | |
704 | spin_unlock(&ip->ioc3_lock); | |
705 | } | |
706 | ||
707 | /* | |
708 | * Deal with fatal IOC3 errors. This condition might be caused by a hard or | |
709 | * software problems, so we should try to recover | |
710 | * more gracefully if this ever happens. In theory we might be flooded | |
711 | * with such error interrupts if something really goes wrong, so we might | |
712 | * also consider to take the interface down. | |
713 | */ | |
714 | static void ioc3_error(struct ioc3_private *ip, u32 eisr) | |
715 | { | |
716 | struct net_device *dev = priv_netdev(ip); | |
717 | unsigned char *iface = dev->name; | |
718 | ||
719 | spin_lock(&ip->ioc3_lock); | |
720 | ||
721 | if (eisr & EISR_RXOFLO) | |
722 | printk(KERN_ERR "%s: RX overflow.\n", iface); | |
723 | if (eisr & EISR_RXBUFOFLO) | |
724 | printk(KERN_ERR "%s: RX buffer overflow.\n", iface); | |
725 | if (eisr & EISR_RXMEMERR) | |
726 | printk(KERN_ERR "%s: RX PCI error.\n", iface); | |
727 | if (eisr & EISR_RXPARERR) | |
728 | printk(KERN_ERR "%s: RX SSRAM parity error.\n", iface); | |
729 | if (eisr & EISR_TXBUFUFLO) | |
730 | printk(KERN_ERR "%s: TX buffer underflow.\n", iface); | |
731 | if (eisr & EISR_TXMEMERR) | |
732 | printk(KERN_ERR "%s: TX PCI error.\n", iface); | |
733 | ||
734 | ioc3_stop(ip); | |
735 | ioc3_init(dev); | |
736 | ioc3_mii_init(ip); | |
737 | ||
738 | netif_wake_queue(dev); | |
739 | ||
740 | spin_unlock(&ip->ioc3_lock); | |
741 | } | |
742 | ||
743 | /* The interrupt handler does all of the Rx thread work and cleans up | |
744 | after the Tx thread. */ | |
7d12e780 | 745 | static irqreturn_t ioc3_interrupt(int irq, void *_dev) |
1da177e4 LT |
746 | { |
747 | struct net_device *dev = (struct net_device *)_dev; | |
748 | struct ioc3_private *ip = netdev_priv(dev); | |
749 | struct ioc3 *ioc3 = ip->regs; | |
750 | const u32 enabled = EISR_RXTIMERINT | EISR_RXOFLO | EISR_RXBUFOFLO | | |
751 | EISR_RXMEMERR | EISR_RXPARERR | EISR_TXBUFUFLO | | |
752 | EISR_TXEXPLICIT | EISR_TXMEMERR; | |
753 | u32 eisr; | |
754 | ||
755 | eisr = ioc3_r_eisr() & enabled; | |
756 | ||
757 | ioc3_w_eisr(eisr); | |
758 | (void) ioc3_r_eisr(); /* Flush */ | |
759 | ||
760 | if (eisr & (EISR_RXOFLO | EISR_RXBUFOFLO | EISR_RXMEMERR | | |
761 | EISR_RXPARERR | EISR_TXBUFUFLO | EISR_TXMEMERR)) | |
762 | ioc3_error(ip, eisr); | |
763 | if (eisr & EISR_RXTIMERINT) | |
764 | ioc3_rx(ip); | |
765 | if (eisr & EISR_TXEXPLICIT) | |
766 | ioc3_tx(ip); | |
767 | ||
768 | return IRQ_HANDLED; | |
769 | } | |
770 | ||
771 | static inline void ioc3_setup_duplex(struct ioc3_private *ip) | |
772 | { | |
773 | struct ioc3 *ioc3 = ip->regs; | |
774 | ||
775 | if (ip->mii.full_duplex) { | |
776 | ioc3_w_etcsr(ETCSR_FD); | |
777 | ip->emcr |= EMCR_DUPLEX; | |
778 | } else { | |
779 | ioc3_w_etcsr(ETCSR_HD); | |
780 | ip->emcr &= ~EMCR_DUPLEX; | |
781 | } | |
782 | ioc3_w_emcr(ip->emcr); | |
783 | } | |
784 | ||
785 | static void ioc3_timer(unsigned long data) | |
786 | { | |
787 | struct ioc3_private *ip = (struct ioc3_private *) data; | |
788 | ||
789 | /* Print the link status if it has changed */ | |
790 | mii_check_media(&ip->mii, 1, 0); | |
791 | ioc3_setup_duplex(ip); | |
792 | ||
793 | ip->ioc3_timer.expires = jiffies + ((12 * HZ)/10); /* 1.2s */ | |
794 | add_timer(&ip->ioc3_timer); | |
795 | } | |
796 | ||
797 | /* | |
798 | * Try to find a PHY. There is no apparent relation between the MII addresses | |
799 | * in the SGI documentation and what we find in reality, so we simply probe | |
800 | * for the PHY. It seems IOC3 PHYs usually live on address 31. One of my | |
801 | * onboard IOC3s has the special oddity that probing doesn't seem to find it | |
802 | * yet the interface seems to work fine, so if probing fails we for now will | |
803 | * simply default to PHY 31 instead of bailing out. | |
804 | */ | |
805 | static int ioc3_mii_init(struct ioc3_private *ip) | |
806 | { | |
807 | struct net_device *dev = priv_netdev(ip); | |
808 | int i, found = 0, res = 0; | |
809 | int ioc3_phy_workaround = 1; | |
810 | u16 word; | |
811 | ||
812 | for (i = 0; i < 32; i++) { | |
813 | word = ioc3_mdio_read(dev, i, MII_PHYSID1); | |
814 | ||
815 | if (word != 0xffff && word != 0x0000) { | |
816 | found = 1; | |
817 | break; /* Found a PHY */ | |
818 | } | |
819 | } | |
820 | ||
821 | if (!found) { | |
822 | if (ioc3_phy_workaround) | |
823 | i = 31; | |
824 | else { | |
825 | ip->mii.phy_id = -1; | |
826 | res = -ENODEV; | |
827 | goto out; | |
828 | } | |
829 | } | |
830 | ||
831 | ip->mii.phy_id = i; | |
f0ba7358 RB |
832 | |
833 | out: | |
834 | return res; | |
835 | } | |
836 | ||
837 | static void ioc3_mii_start(struct ioc3_private *ip) | |
838 | { | |
1da177e4 LT |
839 | ip->ioc3_timer.expires = jiffies + (12 * HZ)/10; /* 1.2 sec. */ |
840 | ip->ioc3_timer.data = (unsigned long) ip; | |
841 | ip->ioc3_timer.function = &ioc3_timer; | |
842 | add_timer(&ip->ioc3_timer); | |
1da177e4 LT |
843 | } |
844 | ||
845 | static inline void ioc3_clean_rx_ring(struct ioc3_private *ip) | |
846 | { | |
847 | struct sk_buff *skb; | |
848 | int i; | |
849 | ||
850 | for (i = ip->rx_ci; i & 15; i++) { | |
851 | ip->rx_skbs[ip->rx_pi] = ip->rx_skbs[ip->rx_ci]; | |
852 | ip->rxr[ip->rx_pi++] = ip->rxr[ip->rx_ci++]; | |
853 | } | |
854 | ip->rx_pi &= 511; | |
855 | ip->rx_ci &= 511; | |
856 | ||
857 | for (i = ip->rx_ci; i != ip->rx_pi; i = (i+1) & 511) { | |
858 | struct ioc3_erxbuf *rxb; | |
859 | skb = ip->rx_skbs[i]; | |
860 | rxb = (struct ioc3_erxbuf *) (skb->data - RX_OFFSET); | |
861 | rxb->w0 = 0; | |
862 | } | |
863 | } | |
864 | ||
865 | static inline void ioc3_clean_tx_ring(struct ioc3_private *ip) | |
866 | { | |
867 | struct sk_buff *skb; | |
868 | int i; | |
869 | ||
870 | for (i=0; i < 128; i++) { | |
871 | skb = ip->tx_skbs[i]; | |
872 | if (skb) { | |
873 | ip->tx_skbs[i] = NULL; | |
874 | dev_kfree_skb_any(skb); | |
875 | } | |
876 | ip->txr[i].cmd = 0; | |
877 | } | |
878 | ip->tx_pi = 0; | |
879 | ip->tx_ci = 0; | |
880 | } | |
881 | ||
882 | static void ioc3_free_rings(struct ioc3_private *ip) | |
883 | { | |
884 | struct sk_buff *skb; | |
885 | int rx_entry, n_entry; | |
886 | ||
887 | if (ip->txr) { | |
888 | ioc3_clean_tx_ring(ip); | |
889 | free_pages((unsigned long)ip->txr, 2); | |
890 | ip->txr = NULL; | |
891 | } | |
892 | ||
893 | if (ip->rxr) { | |
894 | n_entry = ip->rx_ci; | |
895 | rx_entry = ip->rx_pi; | |
896 | ||
897 | while (n_entry != rx_entry) { | |
898 | skb = ip->rx_skbs[n_entry]; | |
899 | if (skb) | |
900 | dev_kfree_skb_any(skb); | |
901 | ||
902 | n_entry = (n_entry + 1) & 511; | |
903 | } | |
904 | free_page((unsigned long)ip->rxr); | |
905 | ip->rxr = NULL; | |
906 | } | |
907 | } | |
908 | ||
909 | static void ioc3_alloc_rings(struct net_device *dev) | |
910 | { | |
911 | struct ioc3_private *ip = netdev_priv(dev); | |
912 | struct ioc3_erxbuf *rxb; | |
913 | unsigned long *rxr; | |
914 | int i; | |
915 | ||
916 | if (ip->rxr == NULL) { | |
917 | /* Allocate and initialize rx ring. 4kb = 512 entries */ | |
918 | ip->rxr = (unsigned long *) get_zeroed_page(GFP_ATOMIC); | |
919 | rxr = (unsigned long *) ip->rxr; | |
920 | if (!rxr) | |
921 | printk("ioc3_alloc_rings(): get_zeroed_page() failed!\n"); | |
922 | ||
923 | /* Now the rx buffers. The RX ring may be larger but | |
924 | we only allocate 16 buffers for now. Need to tune | |
925 | this for performance and memory later. */ | |
926 | for (i = 0; i < RX_BUFFS; i++) { | |
927 | struct sk_buff *skb; | |
928 | ||
929 | skb = ioc3_alloc_skb(RX_BUF_ALLOC_SIZE, GFP_ATOMIC); | |
930 | if (!skb) { | |
931 | show_free_areas(); | |
932 | continue; | |
933 | } | |
934 | ||
935 | ip->rx_skbs[i] = skb; | |
1da177e4 LT |
936 | |
937 | /* Because we reserve afterwards. */ | |
938 | skb_put(skb, (1664 + RX_OFFSET)); | |
939 | rxb = (struct ioc3_erxbuf *) skb->data; | |
940 | rxr[i] = cpu_to_be64(ioc3_map(rxb, 1)); | |
941 | skb_reserve(skb, RX_OFFSET); | |
942 | } | |
943 | ip->rx_ci = 0; | |
944 | ip->rx_pi = RX_BUFFS; | |
945 | } | |
946 | ||
947 | if (ip->txr == NULL) { | |
948 | /* Allocate and initialize tx rings. 16kb = 128 bufs. */ | |
949 | ip->txr = (struct ioc3_etxd *)__get_free_pages(GFP_KERNEL, 2); | |
950 | if (!ip->txr) | |
951 | printk("ioc3_alloc_rings(): __get_free_pages() failed!\n"); | |
952 | ip->tx_pi = 0; | |
953 | ip->tx_ci = 0; | |
954 | } | |
955 | } | |
956 | ||
957 | static void ioc3_init_rings(struct net_device *dev) | |
958 | { | |
959 | struct ioc3_private *ip = netdev_priv(dev); | |
960 | struct ioc3 *ioc3 = ip->regs; | |
961 | unsigned long ring; | |
962 | ||
963 | ioc3_free_rings(ip); | |
964 | ioc3_alloc_rings(dev); | |
965 | ||
966 | ioc3_clean_rx_ring(ip); | |
967 | ioc3_clean_tx_ring(ip); | |
968 | ||
969 | /* Now the rx ring base, consume & produce registers. */ | |
970 | ring = ioc3_map(ip->rxr, 0); | |
971 | ioc3_w_erbr_h(ring >> 32); | |
972 | ioc3_w_erbr_l(ring & 0xffffffff); | |
973 | ioc3_w_ercir(ip->rx_ci << 3); | |
974 | ioc3_w_erpir((ip->rx_pi << 3) | ERPIR_ARM); | |
975 | ||
976 | ring = ioc3_map(ip->txr, 0); | |
977 | ||
978 | ip->txqlen = 0; /* nothing queued */ | |
979 | ||
980 | /* Now the tx ring base, consume & produce registers. */ | |
981 | ioc3_w_etbr_h(ring >> 32); | |
982 | ioc3_w_etbr_l(ring & 0xffffffff); | |
983 | ioc3_w_etpir(ip->tx_pi << 7); | |
984 | ioc3_w_etcir(ip->tx_ci << 7); | |
985 | (void) ioc3_r_etcir(); /* Flush */ | |
986 | } | |
987 | ||
988 | static inline void ioc3_ssram_disc(struct ioc3_private *ip) | |
989 | { | |
990 | struct ioc3 *ioc3 = ip->regs; | |
991 | volatile u32 *ssram0 = &ioc3->ssram[0x0000]; | |
992 | volatile u32 *ssram1 = &ioc3->ssram[0x4000]; | |
993 | unsigned int pattern = 0x5555; | |
994 | ||
995 | /* Assume the larger size SSRAM and enable parity checking */ | |
996 | ioc3_w_emcr(ioc3_r_emcr() | (EMCR_BUFSIZ | EMCR_RAMPAR)); | |
997 | ||
998 | *ssram0 = pattern; | |
999 | *ssram1 = ~pattern & IOC3_SSRAM_DM; | |
1000 | ||
1001 | if ((*ssram0 & IOC3_SSRAM_DM) != pattern || | |
1002 | (*ssram1 & IOC3_SSRAM_DM) != (~pattern & IOC3_SSRAM_DM)) { | |
1003 | /* set ssram size to 64 KB */ | |
1004 | ip->emcr = EMCR_RAMPAR; | |
1005 | ioc3_w_emcr(ioc3_r_emcr() & ~EMCR_BUFSIZ); | |
1006 | } else | |
1007 | ip->emcr = EMCR_BUFSIZ | EMCR_RAMPAR; | |
1008 | } | |
1009 | ||
1010 | static void ioc3_init(struct net_device *dev) | |
1011 | { | |
1012 | struct ioc3_private *ip = netdev_priv(dev); | |
1013 | struct ioc3 *ioc3 = ip->regs; | |
1014 | ||
cfadbd29 | 1015 | del_timer_sync(&ip->ioc3_timer); /* Kill if running */ |
1da177e4 LT |
1016 | |
1017 | ioc3_w_emcr(EMCR_RST); /* Reset */ | |
1018 | (void) ioc3_r_emcr(); /* Flush WB */ | |
1019 | udelay(4); /* Give it time ... */ | |
1020 | ioc3_w_emcr(0); | |
1021 | (void) ioc3_r_emcr(); | |
1022 | ||
1023 | /* Misc registers */ | |
1024 | #ifdef CONFIG_SGI_IP27 | |
1025 | ioc3_w_erbar(PCI64_ATTR_BAR >> 32); /* Barrier on last store */ | |
1026 | #else | |
1027 | ioc3_w_erbar(0); /* Let PCI API get it right */ | |
1028 | #endif | |
1029 | (void) ioc3_r_etcdc(); /* Clear on read */ | |
1030 | ioc3_w_ercsr(15); /* RX low watermark */ | |
1031 | ioc3_w_ertr(0); /* Interrupt immediately */ | |
1032 | __ioc3_set_mac_address(dev); | |
1033 | ioc3_w_ehar_h(ip->ehar_h); | |
1034 | ioc3_w_ehar_l(ip->ehar_l); | |
1035 | ioc3_w_ersr(42); /* XXX should be random */ | |
1036 | ||
1037 | ioc3_init_rings(dev); | |
1038 | ||
1039 | ip->emcr |= ((RX_OFFSET / 2) << EMCR_RXOFF_SHIFT) | EMCR_TXDMAEN | | |
1040 | EMCR_TXEN | EMCR_RXDMAEN | EMCR_RXEN | EMCR_PADEN; | |
1041 | ioc3_w_emcr(ip->emcr); | |
1042 | ioc3_w_eier(EISR_RXTIMERINT | EISR_RXOFLO | EISR_RXBUFOFLO | | |
1043 | EISR_RXMEMERR | EISR_RXPARERR | EISR_TXBUFUFLO | | |
1044 | EISR_TXEXPLICIT | EISR_TXMEMERR); | |
1045 | (void) ioc3_r_eier(); | |
1046 | } | |
1047 | ||
1048 | static inline void ioc3_stop(struct ioc3_private *ip) | |
1049 | { | |
1050 | struct ioc3 *ioc3 = ip->regs; | |
1051 | ||
1052 | ioc3_w_emcr(0); /* Shutup */ | |
1053 | ioc3_w_eier(0); /* Disable interrupts */ | |
1054 | (void) ioc3_r_eier(); /* Flush */ | |
1055 | } | |
1056 | ||
1057 | static int ioc3_open(struct net_device *dev) | |
1058 | { | |
1059 | struct ioc3_private *ip = netdev_priv(dev); | |
1060 | ||
1fb9df5d | 1061 | if (request_irq(dev->irq, ioc3_interrupt, IRQF_SHARED, ioc3_str, dev)) { |
1da177e4 LT |
1062 | printk(KERN_ERR "%s: Can't get irq %d\n", dev->name, dev->irq); |
1063 | ||
1064 | return -EAGAIN; | |
1065 | } | |
1066 | ||
1067 | ip->ehar_h = 0; | |
1068 | ip->ehar_l = 0; | |
1069 | ioc3_init(dev); | |
f0ba7358 | 1070 | ioc3_mii_start(ip); |
1da177e4 LT |
1071 | |
1072 | netif_start_queue(dev); | |
1073 | return 0; | |
1074 | } | |
1075 | ||
1076 | static int ioc3_close(struct net_device *dev) | |
1077 | { | |
1078 | struct ioc3_private *ip = netdev_priv(dev); | |
1079 | ||
cfadbd29 | 1080 | del_timer_sync(&ip->ioc3_timer); |
1da177e4 LT |
1081 | |
1082 | netif_stop_queue(dev); | |
1083 | ||
1084 | ioc3_stop(ip); | |
1085 | free_irq(dev->irq, dev); | |
1086 | ||
1087 | ioc3_free_rings(ip); | |
1088 | return 0; | |
1089 | } | |
1090 | ||
1091 | /* | |
1092 | * MENET cards have four IOC3 chips, which are attached to two sets of | |
1093 | * PCI slot resources each: the primary connections are on slots | |
1094 | * 0..3 and the secondaries are on 4..7 | |
1095 | * | |
1096 | * All four ethernets are brought out to connectors; six serial ports | |
1097 | * (a pair from each of the first three IOC3s) are brought out to | |
1098 | * MiniDINs; all other subdevices are left swinging in the wind, leave | |
1099 | * them disabled. | |
1100 | */ | |
f49343a5 AC |
1101 | |
1102 | static int ioc3_adjacent_is_ioc3(struct pci_dev *pdev, int slot) | |
1103 | { | |
1104 | struct pci_dev *dev = pci_get_slot(pdev->bus, PCI_DEVFN(slot, 0)); | |
1105 | int ret = 0; | |
1106 | ||
1107 | if (dev) { | |
1108 | if (dev->vendor == PCI_VENDOR_ID_SGI && | |
1109 | dev->device == PCI_DEVICE_ID_SGI_IOC3) | |
1110 | ret = 1; | |
1111 | pci_dev_put(dev); | |
1112 | } | |
1113 | ||
1114 | return ret; | |
1115 | } | |
1116 | ||
1117 | static int ioc3_is_menet(struct pci_dev *pdev) | |
1da177e4 | 1118 | { |
f49343a5 AC |
1119 | return pdev->bus->parent == NULL && |
1120 | ioc3_adjacent_is_ioc3(pdev, 0) && | |
1121 | ioc3_adjacent_is_ioc3(pdev, 1) && | |
1122 | ioc3_adjacent_is_ioc3(pdev, 2); | |
1da177e4 LT |
1123 | } |
1124 | ||
1125 | #ifdef CONFIG_SERIAL_8250 | |
1126 | /* | |
1127 | * Note about serial ports and consoles: | |
1128 | * For console output, everyone uses the IOC3 UARTA (offset 0x178) | |
1129 | * connected to the master node (look in ip27_setup_console() and | |
1130 | * ip27prom_console_write()). | |
1131 | * | |
1132 | * For serial (/dev/ttyS0 etc), we can not have hardcoded serial port | |
1133 | * addresses on a partitioned machine. Since we currently use the ioc3 | |
1134 | * serial ports, we use dynamic serial port discovery that the serial.c | |
1135 | * driver uses for pci/pnp ports (there is an entry for the SGI ioc3 | |
1136 | * boards in pci_boards[]). Unfortunately, UARTA's pio address is greater | |
1137 | * than UARTB's, although UARTA on o200s has traditionally been known as | |
1138 | * port 0. So, we just use one serial port from each ioc3 (since the | |
1139 | * serial driver adds addresses to get to higher ports). | |
1140 | * | |
1141 | * The first one to do a register_console becomes the preferred console | |
1142 | * (if there is no kernel command line console= directive). /dev/console | |
1143 | * (ie 5, 1) is then "aliased" into the device number returned by the | |
1144 | * "device" routine referred to in this console structure | |
1145 | * (ip27prom_console_dev). | |
1146 | * | |
1147 | * Also look in ip27-pci.c:pci_fixup_ioc3() for some comments on working | |
1148 | * around ioc3 oddities in this respect. | |
1149 | * | |
0491d1f3 RB |
1150 | * The IOC3 serials use a 22MHz clock rate with an additional divider which |
1151 | * can be programmed in the SCR register if the DLAB bit is set. | |
1152 | * | |
1153 | * Register to interrupt zero because we share the interrupt with | |
1154 | * the serial driver which we don't properly support yet. | |
1155 | * | |
1156 | * Can't use UPF_IOREMAP as the whole of IOC3 resources have already been | |
1157 | * registered. | |
1da177e4 | 1158 | */ |
0491d1f3 RB |
1159 | static void __devinit ioc3_8250_register(struct ioc3_uartregs __iomem *uart) |
1160 | { | |
1161 | #define COSMISC_CONSTANT 6 | |
1162 | ||
1163 | struct uart_port port = { | |
1164 | .irq = 0, | |
1165 | .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF, | |
1166 | .iotype = UPIO_MEM, | |
1167 | .regshift = 0, | |
1168 | .uartclk = (22000000 << 1) / COSMISC_CONSTANT, | |
1169 | ||
1170 | .membase = (unsigned char __iomem *) uart, | |
1171 | .mapbase = (unsigned long) uart, | |
1172 | }; | |
1173 | unsigned char lcr; | |
1174 | ||
1175 | lcr = uart->iu_lcr; | |
1176 | uart->iu_lcr = lcr | UART_LCR_DLAB; | |
1177 | uart->iu_scr = COSMISC_CONSTANT, | |
1178 | uart->iu_lcr = lcr; | |
1179 | uart->iu_lcr; | |
1180 | serial8250_register_port(&port); | |
1181 | } | |
1da177e4 LT |
1182 | |
1183 | static void __devinit ioc3_serial_probe(struct pci_dev *pdev, struct ioc3 *ioc3) | |
1184 | { | |
1da177e4 LT |
1185 | /* |
1186 | * We need to recognice and treat the fourth MENET serial as it | |
1187 | * does not have an SuperIO chip attached to it, therefore attempting | |
1188 | * to access it will result in bus errors. We call something an | |
1189 | * MENET if PCI slot 0, 1, 2 and 3 of a master PCI bus all have an IOC3 | |
1190 | * in it. This is paranoid but we want to avoid blowing up on a | |
1191 | * showhorn PCI box that happens to have 4 IOC3 cards in it so it's | |
1192 | * not paranoid enough ... | |
1193 | */ | |
1194 | if (ioc3_is_menet(pdev) && PCI_SLOT(pdev->devfn) == 3) | |
1195 | return; | |
1196 | ||
15a93807 | 1197 | /* |
0491d1f3 RB |
1198 | * Switch IOC3 to PIO mode. It probably already was but let's be |
1199 | * paranoid | |
15a93807 | 1200 | */ |
0491d1f3 RB |
1201 | ioc3->gpcr_s = GPCR_UARTA_MODESEL | GPCR_UARTB_MODESEL; |
1202 | ioc3->gpcr_s; | |
1203 | ioc3->gppr_6 = 0; | |
1204 | ioc3->gppr_6; | |
1205 | ioc3->gppr_7 = 0; | |
1206 | ioc3->gppr_7; | |
1207 | ioc3->sscr_a = ioc3->sscr_a & ~SSCR_DMA_EN; | |
1208 | ioc3->sscr_a; | |
1209 | ioc3->sscr_b = ioc3->sscr_b & ~SSCR_DMA_EN; | |
1210 | ioc3->sscr_b; | |
1211 | /* Disable all SA/B interrupts except for SA/B_INT in SIO_IEC. */ | |
1212 | ioc3->sio_iec &= ~ (SIO_IR_SA_TX_MT | SIO_IR_SA_RX_FULL | | |
1213 | SIO_IR_SA_RX_HIGH | SIO_IR_SA_RX_TIMER | | |
1214 | SIO_IR_SA_DELTA_DCD | SIO_IR_SA_DELTA_CTS | | |
1215 | SIO_IR_SA_TX_EXPLICIT | SIO_IR_SA_MEMERR); | |
1216 | ioc3->sio_iec |= SIO_IR_SA_INT; | |
1217 | ioc3->sscr_a = 0; | |
1218 | ioc3->sio_iec &= ~ (SIO_IR_SB_TX_MT | SIO_IR_SB_RX_FULL | | |
1219 | SIO_IR_SB_RX_HIGH | SIO_IR_SB_RX_TIMER | | |
1220 | SIO_IR_SB_DELTA_DCD | SIO_IR_SB_DELTA_CTS | | |
1221 | SIO_IR_SB_TX_EXPLICIT | SIO_IR_SB_MEMERR); | |
1222 | ioc3->sio_iec |= SIO_IR_SB_INT; | |
1223 | ioc3->sscr_b = 0; | |
1224 | ||
1225 | ioc3_8250_register(&ioc3->sregs.uarta); | |
1226 | ioc3_8250_register(&ioc3->sregs.uartb); | |
1da177e4 LT |
1227 | } |
1228 | #endif | |
1229 | ||
1230 | static int ioc3_probe(struct pci_dev *pdev, const struct pci_device_id *ent) | |
1231 | { | |
1232 | unsigned int sw_physid1, sw_physid2; | |
1233 | struct net_device *dev = NULL; | |
1234 | struct ioc3_private *ip; | |
1235 | struct ioc3 *ioc3; | |
1236 | unsigned long ioc3_base, ioc3_size; | |
1237 | u32 vendor, model, rev; | |
1238 | int err, pci_using_dac; | |
1239 | ||
1240 | /* Configure DMA attributes. */ | |
910638ae | 1241 | err = pci_set_dma_mask(pdev, DMA_64BIT_MASK); |
1da177e4 LT |
1242 | if (!err) { |
1243 | pci_using_dac = 1; | |
910638ae | 1244 | err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK); |
1da177e4 LT |
1245 | if (err < 0) { |
1246 | printk(KERN_ERR "%s: Unable to obtain 64 bit DMA " | |
1247 | "for consistent allocations\n", pci_name(pdev)); | |
1248 | goto out; | |
1249 | } | |
1250 | } else { | |
910638ae | 1251 | err = pci_set_dma_mask(pdev, DMA_32BIT_MASK); |
1da177e4 LT |
1252 | if (err) { |
1253 | printk(KERN_ERR "%s: No usable DMA configuration, " | |
1254 | "aborting.\n", pci_name(pdev)); | |
1255 | goto out; | |
1256 | } | |
1257 | pci_using_dac = 0; | |
1258 | } | |
1259 | ||
1260 | if (pci_enable_device(pdev)) | |
1261 | return -ENODEV; | |
1262 | ||
1263 | dev = alloc_etherdev(sizeof(struct ioc3_private)); | |
1264 | if (!dev) { | |
1265 | err = -ENOMEM; | |
1266 | goto out_disable; | |
1267 | } | |
1268 | ||
1269 | if (pci_using_dac) | |
1270 | dev->features |= NETIF_F_HIGHDMA; | |
1271 | ||
1272 | err = pci_request_regions(pdev, "ioc3"); | |
1273 | if (err) | |
1274 | goto out_free; | |
1275 | ||
1da177e4 LT |
1276 | SET_NETDEV_DEV(dev, &pdev->dev); |
1277 | ||
1278 | ip = netdev_priv(dev); | |
1279 | ||
1280 | dev->irq = pdev->irq; | |
1281 | ||
1282 | ioc3_base = pci_resource_start(pdev, 0); | |
1283 | ioc3_size = pci_resource_len(pdev, 0); | |
1284 | ioc3 = (struct ioc3 *) ioremap(ioc3_base, ioc3_size); | |
1285 | if (!ioc3) { | |
1286 | printk(KERN_CRIT "ioc3eth(%s): ioremap failed, goodbye.\n", | |
1287 | pci_name(pdev)); | |
1288 | err = -ENOMEM; | |
1289 | goto out_res; | |
1290 | } | |
1291 | ip->regs = ioc3; | |
1292 | ||
1293 | #ifdef CONFIG_SERIAL_8250 | |
1294 | ioc3_serial_probe(pdev, ioc3); | |
1295 | #endif | |
1296 | ||
1297 | spin_lock_init(&ip->ioc3_lock); | |
1298 | init_timer(&ip->ioc3_timer); | |
1299 | ||
1300 | ioc3_stop(ip); | |
1301 | ioc3_init(dev); | |
1302 | ||
1303 | ip->pdev = pdev; | |
1304 | ||
1305 | ip->mii.phy_id_mask = 0x1f; | |
1306 | ip->mii.reg_num_mask = 0x1f; | |
1307 | ip->mii.dev = dev; | |
1308 | ip->mii.mdio_read = ioc3_mdio_read; | |
1309 | ip->mii.mdio_write = ioc3_mdio_write; | |
1310 | ||
1311 | ioc3_mii_init(ip); | |
1312 | ||
1313 | if (ip->mii.phy_id == -1) { | |
1314 | printk(KERN_CRIT "ioc3-eth(%s): Didn't find a PHY, goodbye.\n", | |
1315 | pci_name(pdev)); | |
1316 | err = -ENODEV; | |
1317 | goto out_stop; | |
1318 | } | |
1319 | ||
f0ba7358 | 1320 | ioc3_mii_start(ip); |
1da177e4 LT |
1321 | ioc3_ssram_disc(ip); |
1322 | ioc3_get_eaddr(ip); | |
1323 | ||
1324 | /* The IOC3-specific entries in the device structure. */ | |
1325 | dev->open = ioc3_open; | |
1326 | dev->hard_start_xmit = ioc3_start_xmit; | |
1327 | dev->tx_timeout = ioc3_timeout; | |
1328 | dev->watchdog_timeo = 5 * HZ; | |
1329 | dev->stop = ioc3_close; | |
1330 | dev->get_stats = ioc3_get_stats; | |
1331 | dev->do_ioctl = ioc3_ioctl; | |
1332 | dev->set_multicast_list = ioc3_set_multicast_list; | |
1333 | dev->set_mac_address = ioc3_set_mac_address; | |
1334 | dev->ethtool_ops = &ioc3_ethtool_ops; | |
1da177e4 | 1335 | dev->features = NETIF_F_IP_CSUM; |
1da177e4 | 1336 | |
1da177e4 LT |
1337 | sw_physid1 = ioc3_mdio_read(dev, ip->mii.phy_id, MII_PHYSID1); |
1338 | sw_physid2 = ioc3_mdio_read(dev, ip->mii.phy_id, MII_PHYSID2); | |
1339 | ||
1340 | err = register_netdev(dev); | |
1341 | if (err) | |
1342 | goto out_stop; | |
1343 | ||
1344 | mii_check_media(&ip->mii, 1, 1); | |
852ea22a | 1345 | ioc3_setup_duplex(ip); |
1da177e4 LT |
1346 | |
1347 | vendor = (sw_physid1 << 12) | (sw_physid2 >> 4); | |
1348 | model = (sw_physid2 >> 4) & 0x3f; | |
1349 | rev = sw_physid2 & 0xf; | |
1350 | printk(KERN_INFO "%s: Using PHY %d, vendor 0x%x, model %d, " | |
1351 | "rev %d.\n", dev->name, ip->mii.phy_id, vendor, model, rev); | |
1352 | printk(KERN_INFO "%s: IOC3 SSRAM has %d kbyte.\n", dev->name, | |
1353 | ip->emcr & EMCR_BUFSIZ ? 128 : 64); | |
1354 | ||
1355 | return 0; | |
1356 | ||
1357 | out_stop: | |
1358 | ioc3_stop(ip); | |
f0ba7358 | 1359 | del_timer_sync(&ip->ioc3_timer); |
1da177e4 LT |
1360 | ioc3_free_rings(ip); |
1361 | out_res: | |
1362 | pci_release_regions(pdev); | |
1363 | out_free: | |
1364 | free_netdev(dev); | |
1365 | out_disable: | |
1366 | /* | |
1367 | * We should call pci_disable_device(pdev); here if the IOC3 wasn't | |
1368 | * such a weird device ... | |
1369 | */ | |
1370 | out: | |
1371 | return err; | |
1372 | } | |
1373 | ||
1374 | static void __devexit ioc3_remove_one (struct pci_dev *pdev) | |
1375 | { | |
1376 | struct net_device *dev = pci_get_drvdata(pdev); | |
1377 | struct ioc3_private *ip = netdev_priv(dev); | |
1378 | struct ioc3 *ioc3 = ip->regs; | |
1379 | ||
1380 | unregister_netdev(dev); | |
f0ba7358 RB |
1381 | del_timer_sync(&ip->ioc3_timer); |
1382 | ||
1da177e4 LT |
1383 | iounmap(ioc3); |
1384 | pci_release_regions(pdev); | |
1385 | free_netdev(dev); | |
1386 | /* | |
1387 | * We should call pci_disable_device(pdev); here if the IOC3 wasn't | |
1388 | * such a weird device ... | |
1389 | */ | |
1390 | } | |
1391 | ||
1392 | static struct pci_device_id ioc3_pci_tbl[] = { | |
1393 | { PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3, PCI_ANY_ID, PCI_ANY_ID }, | |
1394 | { 0 } | |
1395 | }; | |
1396 | MODULE_DEVICE_TABLE(pci, ioc3_pci_tbl); | |
1397 | ||
1398 | static struct pci_driver ioc3_driver = { | |
1399 | .name = "ioc3-eth", | |
1400 | .id_table = ioc3_pci_tbl, | |
1401 | .probe = ioc3_probe, | |
1402 | .remove = __devexit_p(ioc3_remove_one), | |
1403 | }; | |
1404 | ||
1405 | static int __init ioc3_init_module(void) | |
1406 | { | |
70f1e002 | 1407 | return pci_register_driver(&ioc3_driver); |
1da177e4 LT |
1408 | } |
1409 | ||
1410 | static void __exit ioc3_cleanup_module(void) | |
1411 | { | |
1412 | pci_unregister_driver(&ioc3_driver); | |
1413 | } | |
1414 | ||
1415 | static int ioc3_start_xmit(struct sk_buff *skb, struct net_device *dev) | |
1416 | { | |
1417 | unsigned long data; | |
1418 | struct ioc3_private *ip = netdev_priv(dev); | |
1419 | struct ioc3 *ioc3 = ip->regs; | |
1420 | unsigned int len; | |
1421 | struct ioc3_etxd *desc; | |
1422 | uint32_t w0 = 0; | |
1423 | int produce; | |
1424 | ||
1da177e4 LT |
1425 | /* |
1426 | * IOC3 has a fairly simple minded checksumming hardware which simply | |
1427 | * adds up the 1's complement checksum for the entire packet and | |
1428 | * inserts it at an offset which can be specified in the descriptor | |
1429 | * into the transmit packet. This means we have to compensate for the | |
1430 | * MAC header which should not be summed and the TCP/UDP pseudo headers | |
1431 | * manually. | |
1432 | */ | |
84fa7933 | 1433 | if (skb->ip_summed == CHECKSUM_PARTIAL) { |
eddc9ec5 ACM |
1434 | const struct iphdr *ih = ip_hdr(skb); |
1435 | const int proto = ntohs(ih->protocol); | |
1da177e4 | 1436 | unsigned int csoff; |
1da177e4 LT |
1437 | uint32_t csum, ehsum; |
1438 | uint16_t *eh; | |
1439 | ||
1440 | /* The MAC header. skb->mac seem the logic approach | |
1441 | to find the MAC header - except it's a NULL pointer ... */ | |
1442 | eh = (uint16_t *) skb->data; | |
1443 | ||
1444 | /* Sum up dest addr, src addr and protocol */ | |
1445 | ehsum = eh[0] + eh[1] + eh[2] + eh[3] + eh[4] + eh[5] + eh[6]; | |
1446 | ||
1447 | /* Fold ehsum. can't use csum_fold which negates also ... */ | |
1448 | ehsum = (ehsum & 0xffff) + (ehsum >> 16); | |
1449 | ehsum = (ehsum & 0xffff) + (ehsum >> 16); | |
1450 | ||
1451 | /* Skip IP header; it's sum is always zero and was | |
1452 | already filled in by ip_output.c */ | |
1453 | csum = csum_tcpudp_nofold(ih->saddr, ih->daddr, | |
1454 | ih->tot_len - (ih->ihl << 2), | |
1455 | proto, 0xffff ^ ehsum); | |
1456 | ||
1457 | csum = (csum & 0xffff) + (csum >> 16); /* Fold again */ | |
1458 | csum = (csum & 0xffff) + (csum >> 16); | |
1459 | ||
1460 | csoff = ETH_HLEN + (ih->ihl << 2); | |
1461 | if (proto == IPPROTO_UDP) { | |
1462 | csoff += offsetof(struct udphdr, check); | |
4bedb452 | 1463 | udp_hdr(skb)->check = csum; |
1da177e4 LT |
1464 | } |
1465 | if (proto == IPPROTO_TCP) { | |
1466 | csoff += offsetof(struct tcphdr, check); | |
aa8223c7 | 1467 | tcp_hdr(skb)->check = csum; |
1da177e4 LT |
1468 | } |
1469 | ||
1470 | w0 = ETXD_DOCHECKSUM | (csoff << ETXD_CHKOFF_SHIFT); | |
1471 | } | |
1da177e4 LT |
1472 | |
1473 | spin_lock_irq(&ip->ioc3_lock); | |
1474 | ||
1475 | data = (unsigned long) skb->data; | |
1476 | len = skb->len; | |
1477 | ||
1478 | produce = ip->tx_pi; | |
1479 | desc = &ip->txr[produce]; | |
1480 | ||
1481 | if (len <= 104) { | |
1482 | /* Short packet, let's copy it directly into the ring. */ | |
d626f62b | 1483 | skb_copy_from_linear_data(skb, desc->data, skb->len); |
1da177e4 LT |
1484 | if (len < ETH_ZLEN) { |
1485 | /* Very short packet, pad with zeros at the end. */ | |
1486 | memset(desc->data + len, 0, ETH_ZLEN - len); | |
1487 | len = ETH_ZLEN; | |
1488 | } | |
1489 | desc->cmd = cpu_to_be32(len | ETXD_INTWHENDONE | ETXD_D0V | w0); | |
1490 | desc->bufcnt = cpu_to_be32(len); | |
1491 | } else if ((data ^ (data + len - 1)) & 0x4000) { | |
1492 | unsigned long b2 = (data | 0x3fffUL) + 1UL; | |
1493 | unsigned long s1 = b2 - data; | |
1494 | unsigned long s2 = data + len - b2; | |
1495 | ||
1496 | desc->cmd = cpu_to_be32(len | ETXD_INTWHENDONE | | |
1497 | ETXD_B1V | ETXD_B2V | w0); | |
1498 | desc->bufcnt = cpu_to_be32((s1 << ETXD_B1CNT_SHIFT) | | |
1499 | (s2 << ETXD_B2CNT_SHIFT)); | |
1500 | desc->p1 = cpu_to_be64(ioc3_map(skb->data, 1)); | |
1501 | desc->p2 = cpu_to_be64(ioc3_map((void *) b2, 1)); | |
1502 | } else { | |
1503 | /* Normal sized packet that doesn't cross a page boundary. */ | |
1504 | desc->cmd = cpu_to_be32(len | ETXD_INTWHENDONE | ETXD_B1V | w0); | |
1505 | desc->bufcnt = cpu_to_be32(len << ETXD_B1CNT_SHIFT); | |
1506 | desc->p1 = cpu_to_be64(ioc3_map(skb->data, 1)); | |
1507 | } | |
1508 | ||
1509 | BARRIER(); | |
1510 | ||
1511 | dev->trans_start = jiffies; | |
1512 | ip->tx_skbs[produce] = skb; /* Remember skb */ | |
1513 | produce = (produce + 1) & 127; | |
1514 | ip->tx_pi = produce; | |
1515 | ioc3_w_etpir(produce << 7); /* Fire ... */ | |
1516 | ||
1517 | ip->txqlen++; | |
1518 | ||
1519 | if (ip->txqlen >= 127) | |
1520 | netif_stop_queue(dev); | |
1521 | ||
1522 | spin_unlock_irq(&ip->ioc3_lock); | |
1523 | ||
1524 | return 0; | |
1525 | } | |
1526 | ||
1527 | static void ioc3_timeout(struct net_device *dev) | |
1528 | { | |
1529 | struct ioc3_private *ip = netdev_priv(dev); | |
1530 | ||
1531 | printk(KERN_ERR "%s: transmit timed out, resetting\n", dev->name); | |
1532 | ||
1533 | spin_lock_irq(&ip->ioc3_lock); | |
1534 | ||
1535 | ioc3_stop(ip); | |
1536 | ioc3_init(dev); | |
1537 | ioc3_mii_init(ip); | |
f0ba7358 | 1538 | ioc3_mii_start(ip); |
1da177e4 LT |
1539 | |
1540 | spin_unlock_irq(&ip->ioc3_lock); | |
1541 | ||
1542 | netif_wake_queue(dev); | |
1543 | } | |
1544 | ||
1545 | /* | |
1546 | * Given a multicast ethernet address, this routine calculates the | |
1547 | * address's bit index in the logical address filter mask | |
1548 | */ | |
1549 | ||
1550 | static inline unsigned int ioc3_hash(const unsigned char *addr) | |
1551 | { | |
1552 | unsigned int temp = 0; | |
1553 | u32 crc; | |
1554 | int bits; | |
1555 | ||
1556 | crc = ether_crc_le(ETH_ALEN, addr); | |
1557 | ||
1558 | crc &= 0x3f; /* bit reverse lowest 6 bits for hash index */ | |
1559 | for (bits = 6; --bits >= 0; ) { | |
1560 | temp <<= 1; | |
1561 | temp |= (crc & 0x1); | |
1562 | crc >>= 1; | |
1563 | } | |
1564 | ||
1565 | return temp; | |
1566 | } | |
1567 | ||
1568 | static void ioc3_get_drvinfo (struct net_device *dev, | |
1569 | struct ethtool_drvinfo *info) | |
1570 | { | |
1571 | struct ioc3_private *ip = netdev_priv(dev); | |
852ea22a | 1572 | |
1da177e4 LT |
1573 | strcpy (info->driver, IOC3_NAME); |
1574 | strcpy (info->version, IOC3_VERSION); | |
1575 | strcpy (info->bus_info, pci_name(ip->pdev)); | |
1576 | } | |
1577 | ||
1578 | static int ioc3_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) | |
1579 | { | |
1580 | struct ioc3_private *ip = netdev_priv(dev); | |
1581 | int rc; | |
1582 | ||
1583 | spin_lock_irq(&ip->ioc3_lock); | |
1584 | rc = mii_ethtool_gset(&ip->mii, cmd); | |
1585 | spin_unlock_irq(&ip->ioc3_lock); | |
1586 | ||
1587 | return rc; | |
1588 | } | |
1589 | ||
1590 | static int ioc3_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) | |
1591 | { | |
1592 | struct ioc3_private *ip = netdev_priv(dev); | |
1593 | int rc; | |
1594 | ||
1595 | spin_lock_irq(&ip->ioc3_lock); | |
1596 | rc = mii_ethtool_sset(&ip->mii, cmd); | |
1597 | spin_unlock_irq(&ip->ioc3_lock); | |
852ea22a | 1598 | |
1da177e4 LT |
1599 | return rc; |
1600 | } | |
1601 | ||
1602 | static int ioc3_nway_reset(struct net_device *dev) | |
1603 | { | |
1604 | struct ioc3_private *ip = netdev_priv(dev); | |
1605 | int rc; | |
1606 | ||
1607 | spin_lock_irq(&ip->ioc3_lock); | |
1608 | rc = mii_nway_restart(&ip->mii); | |
1609 | spin_unlock_irq(&ip->ioc3_lock); | |
1610 | ||
1611 | return rc; | |
1612 | } | |
1613 | ||
1614 | static u32 ioc3_get_link(struct net_device *dev) | |
1615 | { | |
1616 | struct ioc3_private *ip = netdev_priv(dev); | |
1617 | int rc; | |
1618 | ||
1619 | spin_lock_irq(&ip->ioc3_lock); | |
1620 | rc = mii_link_ok(&ip->mii); | |
1621 | spin_unlock_irq(&ip->ioc3_lock); | |
1622 | ||
1623 | return rc; | |
1624 | } | |
1625 | ||
bbfb86c5 RB |
1626 | static u32 ioc3_get_rx_csum(struct net_device *dev) |
1627 | { | |
1628 | struct ioc3_private *ip = netdev_priv(dev); | |
1629 | ||
1630 | return ip->flags & IOC3_FLAG_RX_CHECKSUMS; | |
1631 | } | |
1632 | ||
1633 | static int ioc3_set_rx_csum(struct net_device *dev, u32 data) | |
1634 | { | |
1635 | struct ioc3_private *ip = netdev_priv(dev); | |
1636 | ||
1637 | spin_lock_bh(&ip->ioc3_lock); | |
1638 | if (data) | |
1639 | ip->flags |= IOC3_FLAG_RX_CHECKSUMS; | |
1640 | else | |
1641 | ip->flags &= ~IOC3_FLAG_RX_CHECKSUMS; | |
1642 | spin_unlock_bh(&ip->ioc3_lock); | |
1643 | ||
1644 | return 0; | |
1645 | } | |
1646 | ||
7282d491 | 1647 | static const struct ethtool_ops ioc3_ethtool_ops = { |
1da177e4 LT |
1648 | .get_drvinfo = ioc3_get_drvinfo, |
1649 | .get_settings = ioc3_get_settings, | |
1650 | .set_settings = ioc3_set_settings, | |
1651 | .nway_reset = ioc3_nway_reset, | |
1652 | .get_link = ioc3_get_link, | |
bbfb86c5 RB |
1653 | .get_rx_csum = ioc3_get_rx_csum, |
1654 | .set_rx_csum = ioc3_set_rx_csum, | |
1655 | .get_tx_csum = ethtool_op_get_tx_csum, | |
1656 | .set_tx_csum = ethtool_op_set_tx_csum | |
1da177e4 LT |
1657 | }; |
1658 | ||
1659 | static int ioc3_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) | |
1660 | { | |
1661 | struct ioc3_private *ip = netdev_priv(dev); | |
1662 | int rc; | |
1663 | ||
1664 | spin_lock_irq(&ip->ioc3_lock); | |
1665 | rc = generic_mii_ioctl(&ip->mii, if_mii(rq), cmd, NULL); | |
1666 | spin_unlock_irq(&ip->ioc3_lock); | |
1667 | ||
1668 | return rc; | |
1669 | } | |
1670 | ||
1671 | static void ioc3_set_multicast_list(struct net_device *dev) | |
1672 | { | |
1673 | struct dev_mc_list *dmi = dev->mc_list; | |
1674 | struct ioc3_private *ip = netdev_priv(dev); | |
1675 | struct ioc3 *ioc3 = ip->regs; | |
1676 | u64 ehar = 0; | |
1677 | int i; | |
1678 | ||
1679 | netif_stop_queue(dev); /* Lock out others. */ | |
1680 | ||
1681 | if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */ | |
1da177e4 LT |
1682 | ip->emcr |= EMCR_PROMISC; |
1683 | ioc3_w_emcr(ip->emcr); | |
1684 | (void) ioc3_r_emcr(); | |
1685 | } else { | |
1686 | ip->emcr &= ~EMCR_PROMISC; | |
1687 | ioc3_w_emcr(ip->emcr); /* Clear promiscuous. */ | |
1688 | (void) ioc3_r_emcr(); | |
1689 | ||
1690 | if ((dev->flags & IFF_ALLMULTI) || (dev->mc_count > 64)) { | |
1691 | /* Too many for hashing to make sense or we want all | |
1692 | multicast packets anyway, so skip computing all the | |
1693 | hashes and just accept all packets. */ | |
1694 | ip->ehar_h = 0xffffffff; | |
1695 | ip->ehar_l = 0xffffffff; | |
1696 | } else { | |
1697 | for (i = 0; i < dev->mc_count; i++) { | |
1698 | char *addr = dmi->dmi_addr; | |
1699 | dmi = dmi->next; | |
1700 | ||
1701 | if (!(*addr & 1)) | |
1702 | continue; | |
1703 | ||
1704 | ehar |= (1UL << ioc3_hash(addr)); | |
1705 | } | |
1706 | ip->ehar_h = ehar >> 32; | |
1707 | ip->ehar_l = ehar & 0xffffffff; | |
1708 | } | |
1709 | ioc3_w_ehar_h(ip->ehar_h); | |
1710 | ioc3_w_ehar_l(ip->ehar_l); | |
1711 | } | |
1712 | ||
1713 | netif_wake_queue(dev); /* Let us get going again. */ | |
1714 | } | |
1715 | ||
1716 | MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>"); | |
1717 | MODULE_DESCRIPTION("SGI IOC3 Ethernet driver"); | |
1718 | MODULE_LICENSE("GPL"); | |
1719 | ||
1720 | module_init(ioc3_init_module); | |
1721 | module_exit(ioc3_cleanup_module); |