[deliverable/linux.git] / drivers / net / irda / Kconfig

menu "Infrared-port device drivers"
	depends on IRDA!=n

comment "SIR device drivers"

config IRTTY_SIR
	tristate "IrTTY (uses Linux serial driver)"
	depends on IRDA && TTY
	help
	  Say Y here if you want to build support for the IrTTY line
	  discipline.  To compile it as a module, choose M here: the module
	  will be called irtty-sir. IrTTY makes it possible to use Linux's
	  own serial driver for all IrDA ports that are 16550 compatible.
	  Most IrDA chips are 16550 compatible so you should probably say Y
	  to this option.  Using IrTTY will however limit the speed of the
	  connection to 115200 bps (IrDA SIR mode).

	  If unsure, say Y.

config BFIN_SIR
	tristate "Blackfin SIR on UART"
	depends on BLACKFIN && IRDA
	default n
	help
	  Say Y here if your want to enable SIR function on Blackfin UART
	  devices.

	  To activate this driver you can start irattach like:
	  "irattach irda0 -s"

	  Saying M, it will be built as a module named bfin_sir.

	  Note that you need to turn off one of the serial drivers for SIR
	  to use that UART.

config BFIN_SIR0
	bool "Blackfin SIR on UART0"
	depends on BFIN_SIR && !SERIAL_BFIN_UART0

config BFIN_SIR1
	bool "Blackfin SIR on UART1"
	depends on BFIN_SIR && !SERIAL_BFIN_UART1 && (!BF531 && !BF532 && !BF533 && !BF561)

config BFIN_SIR2
	bool "Blackfin SIR on UART2"
	depends on BFIN_SIR && !SERIAL_BFIN_UART2 && (BF54x || BF538 || BF539)

config BFIN_SIR3
	bool "Blackfin SIR on UART3"
	depends on BFIN_SIR && !SERIAL_BFIN_UART3 && (BF54x)

choice
	prompt "SIR Mode"
	depends on BFIN_SIR
	default SIR_BFIN_DMA

config SIR_BFIN_DMA
	bool "DMA mode"
	depends on !DMA_UNCACHED_NONE

config SIR_BFIN_PIO
	bool "PIO mode"
endchoice

config SH_SIR
	tristate "SuperH SIR on UART"
	depends on IRDA && SUPERH && \
		(CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7723 || \
		 CPU_SUBTYPE_SH7724)
	default n
	help
	  Say Y here if your want to enable SIR function on SuperH UART
	  devices.

comment "Dongle support"

config DONGLE
	bool "Serial dongle support"
	depends on IRTTY_SIR
	help
	  Say Y here if you have an infrared device that connects to your
	  computer's serial port. These devices are called dongles. Then say Y
	  or M to the driver for your particular dongle below.

	  Note that the answer to this question won't directly affect the
	  kernel: saying N will just cause the configurator to skip all
	  the questions about serial dongles.

config ESI_DONGLE
	tristate "ESI JetEye PC dongle"
	depends on IRTTY_SIR && DONGLE && IRDA
	help
	  Say Y here if you want to build support for the Extended Systems
	  JetEye PC dongle.  To compile it as a module, choose M here. The ESI
	  dongle attaches to the normal 9-pin serial port connector, and can
	  currently only be used by IrTTY.  To activate support for ESI
	  dongles you will have to start irattach like this:
	  "irattach -d esi".

config ACTISYS_DONGLE
	tristate "ACTiSYS IR-220L and IR220L+ dongle"
	depends on IRTTY_SIR && DONGLE && IRDA
	help
	  Say Y here if you want to build support for the ACTiSYS IR-220L and
	  IR220L+ dongles.  To compile it as a module, choose M here. The
	  ACTiSYS dongles attaches to the normal 9-pin serial port connector,
	  and can currently only be used by IrTTY.  To activate support for
	  ACTiSYS dongles you will have to start irattach like this:
	  "irattach -d actisys" or "irattach -d actisys+".

config TEKRAM_DONGLE
	tristate "Tekram IrMate 210B dongle"
	depends on IRTTY_SIR && DONGLE && IRDA
	help
	  Say Y here if you want to build support for the Tekram IrMate 210B
	  dongle.  To compile it as a module, choose M here. The Tekram dongle
	  attaches to the normal 9-pin serial port connector, and can
	  currently only be used by IrTTY.  To activate support for Tekram
	  dongles you will have to start irattach like this:
	  "irattach -d tekram".

config TOIM3232_DONGLE
	tristate "TOIM3232 IrDa dongle"
	depends on IRTTY_SIR && DONGLE && IRDA
	help
	  Say Y here if you want to build support for the Vishay/Temic
	  TOIM3232 and TOIM4232 based dongles.
	  To compile it as a module, choose M here.

config LITELINK_DONGLE
	tristate "Parallax LiteLink dongle"
	depends on IRTTY_SIR && DONGLE && IRDA
	help
	  Say Y here if you want to build support for the Parallax Litelink
	  dongle.  To compile it as a module, choose M here.  The Parallax
	  dongle attaches to the normal 9-pin serial port connector, and can
	  currently only be used by IrTTY.  To activate support for Parallax
	  dongles you will have to start irattach like this:
	  "irattach -d litelink".

config MA600_DONGLE
	tristate "Mobile Action MA600 dongle"
	depends on IRTTY_SIR && DONGLE && IRDA
	help
	  Say Y here if you want to build support for the Mobile Action MA600
	  dongle.  To compile it as a module, choose M here. The MA600 dongle
	  attaches to the normal 9-pin serial port connector, and can
	  currently only be used by IrTTY.  The driver should also support
	  the MA620 USB version of the dongle, if the integrated USB-to-RS232
	  converter is supported by usbserial. To activate support for
	  MA600 dongle you will have to start irattach like this:
	  "irattach -d ma600".

config GIRBIL_DONGLE
	tristate "Greenwich GIrBIL dongle"
	depends on IRTTY_SIR && DONGLE && IRDA
	help
	  Say Y here if you want to build support for the Greenwich GIrBIL
	  dongle.  If you want to compile it as a module, choose M here.
	  The Greenwich dongle attaches to the normal 9-pin serial port
	  connector, and can currently only be used by IrTTY.  To activate
	  support for Greenwich dongles you will have to start irattach
	  like this: "irattach -d girbil".

config MCP2120_DONGLE
	tristate "Microchip MCP2120"
	depends on IRTTY_SIR && DONGLE && IRDA
	help
	  Say Y here if you want to build support for the Microchip MCP2120
	  dongle.  If you want to compile it as a module, choose M here.
	  The MCP2120 dongle attaches to the normal 9-pin serial port
	  connector, and can currently only be used by IrTTY.  To activate
	  support for MCP2120 dongles you will have to start irattach
	  like this: "irattach -d mcp2120".

	  You must build this dongle yourself.  For more information see:
	  <http://www.eyetap.org/~tangf/irda_sir_linux.html>

config OLD_BELKIN_DONGLE
	tristate "Old Belkin dongle"
	depends on IRTTY_SIR && DONGLE && IRDA
	help
	  Say Y here if you want to build support for the Adaptec Airport 1000
	  and 2000 dongles.  If you want to compile it as a module, choose
	  M here. Some information is contained in the comments
	  at the top of <file:drivers/net/irda/old_belkin-sir.c>.

config ACT200L_DONGLE
	tristate "ACTiSYS IR-200L dongle"
	depends on IRTTY_SIR && DONGLE && IRDA
	help
	  Say Y here if you want to build support for the ACTiSYS IR-200L
	  dongle. If you want to compile it as a module, choose M here.
	  The ACTiSYS IR-200L dongle attaches to the normal 9-pin serial
	  port connector, and can currently only be used by IrTTY.
	  To activate support for ACTiSYS IR-200L dongle you will have to
	  start irattach like this: "irattach -d act200l".

config KINGSUN_DONGLE
	tristate "KingSun/DonShine DS-620 IrDA-USB dongle"
	depends on IRDA && USB
	help
	  Say Y or M here if you want to build support for the KingSun/DonShine
	  DS-620 IrDA-USB bridge device driver.

	  This USB bridge does not conform to the IrDA-USB device class
	  specification, and therefore needs its own specific driver. This
	  dongle supports SIR speed only (9600 bps).

	  To compile it as a module, choose M here: the module will be called
	  kingsun-sir.

config KSDAZZLE_DONGLE
	tristate "KingSun Dazzle IrDA-USB dongle"
	depends on IRDA && USB
	help
	  Say Y or M here if you want to build support for the KingSun Dazzle
	  IrDA-USB bridge device driver.

	  This USB bridge does not conform to the IrDA-USB device class
	  specification, and therefore needs its own specific driver. This
	  dongle supports SIR speeds only (9600 through 115200 bps).

	  To compile it as a module, choose M here: the module will be called
	  ksdazzle-sir.

config KS959_DONGLE
	tristate "KingSun KS-959 IrDA-USB dongle"
	depends on IRDA && USB
	help
	  Say Y or M here if you want to build support for the KingSun KS-959
	  IrDA-USB bridge device driver.

	  This USB bridge does not conform to the IrDA-USB device class
	  specification, and therefore needs its own specific driver. This
	  dongle supports SIR speeds only (9600 through 57600 bps).

	  To compile it as a module, choose M here: the module will be called
	  ks959-sir.

comment "FIR device drivers"

config USB_IRDA
	tristate "IrDA USB dongles"
	depends on IRDA && USB
	select FW_LOADER
	---help---
	  Say Y here if you want to build support for the USB IrDA FIR Dongle
	  device driver.  To compile it as a module, choose M here: the module
	  will be called irda-usb.  IrDA-USB support the various IrDA USB
	  dongles available and most of their peculiarities.  Those dongles
	  plug in the USB port of your computer, are plug and play, and
	  support SIR and FIR (4Mbps) speeds.  On the other hand, those
	  dongles tend to be less efficient than a FIR chipset.

	  Please note that the driver is still experimental.  And of course,
	  you will need both USB and IrDA support in your kernel...

config SIGMATEL_FIR
	tristate "SigmaTel STIr4200 bridge"
	depends on IRDA && USB
	select CRC32
	---help---
	  Say Y here if you want to build support for the SigmaTel STIr4200
	  USB IrDA FIR bridge device driver.  

	  USB bridge based on the SigmaTel STIr4200 don't conform to the
	  IrDA-USB device class specification, and therefore need their
	  own specific driver. Those dongles support SIR and FIR (4Mbps)
	  speeds. 

	  To compile it as a module, choose M here: the module will be called
	  stir4200.

config NSC_FIR
	tristate "NSC PC87108/PC87338"
	depends on IRDA && ISA_DMA_API
	help
	  Say Y here if you want to build support for the NSC PC87108 and
	  PC87338 IrDA chipsets.  This driver supports SIR,
	  MIR and FIR (4Mbps) speeds.

	  To compile it as a module, choose M here: the module will be called
	  nsc-ircc.

config WINBOND_FIR
	tristate "Winbond W83977AF (IR)"
	depends on IRDA && ISA_DMA_API
	help
	  Say Y here if you want to build IrDA support for the Winbond
	  W83977AF super-io chipset.  This driver should be used for the IrDA
	  chipset in the Corel NetWinder.  The driver supports SIR, MIR and
	  FIR (4Mbps) speeds.

	  To compile it as a module, choose M here: the module will be called
	  w83977af_ir.

config TOSHIBA_FIR
	tristate "Toshiba Type-O IR Port"
	depends on IRDA && PCI && !64BIT && VIRT_TO_BUS
	help
	  Say Y here if you want to build support for the Toshiba Type-O IR
	  and Donau oboe chipsets. These chipsets are used by the Toshiba
	  Libretto 100/110CT, Tecra 8100, Portege 7020 and many more laptops.
	  To compile it as a module, choose M here: the module will be called
	  donauboe.

config AU1000_FIR
	tristate "Alchemy IrDA SIR/FIR"
	depends on IRDA && MIPS_ALCHEMY
	help
	  Say Y/M here to build support the IrDA peripheral on the
	  Alchemy Au1000 and Au1100 SoCs.
	  Say M to build a module; it will be called au1k_ir.ko

config SMC_IRCC_FIR
	tristate "SMSC IrCC"
	depends on IRDA && ISA_DMA_API
	help
	  Say Y here if you want to build support for the SMC Infrared
	  Communications Controller.  It is used in a wide variety of
	  laptops (Fujitsu, Sony, Compaq and some Toshiba).
	  To compile it as a module, choose M here: the module will be called
	  smsc-ircc2.o.

config ALI_FIR
	tristate "ALi M5123 FIR"
	depends on IRDA && ISA_DMA_API
	help
	  Say Y here if you want to build support for the ALi M5123 FIR
	  Controller.  The ALi M5123 FIR Controller is embedded in ALi M1543C,
	  M1535, M1535D, M1535+, M1535D South Bridge.  This driver supports
	  SIR, MIR and FIR (4Mbps) speeds.

	  To compile it as a module, choose M here: the module will be called
	  ali-ircc.

config VLSI_FIR
	tristate "VLSI 82C147 SIR/MIR/FIR"
	depends on IRDA && PCI
	help
	  Say Y here if you want to build support for the VLSI 82C147
	  PCI-IrDA Controller. This controller is used by the HP OmniBook 800
	  and 5500 notebooks. The driver provides support for SIR, MIR and
	  FIR (4Mbps) speeds.

	  To compile it as a module, choose M here: the module will be called
	  vlsi_ir.

config SA1100_FIR
	tristate "SA1100 Internal IR"
	depends on ARCH_SA1100 && IRDA && DMA_SA11X0

config VIA_FIR
	tristate "VIA VT8231/VT1211 SIR/MIR/FIR"
	depends on IRDA && ISA_DMA_API
	help
	  Say Y here if you want to build support for the VIA VT8231
	  and VIA VT1211 IrDA controllers, found on the motherboards using
	  those VIA chipsets. To use this controller, you will need
	  to plug a specific 5 pins FIR IrDA dongle in the specific
	  motherboard connector. The driver provides support for SIR, MIR
	  and FIR (4Mbps) speeds.

	  You will need to specify the 'dongle_id' module parameter to
	  indicate the FIR dongle attached to the controller.

	  To compile it as a module, choose M here: the module will be called
	  via-ircc.

config PXA_FICP
	tristate "Intel PXA2xx Internal FICP"
	depends on ARCH_PXA && IRDA
	help
	  Say Y or M here if you want to build support for the PXA2xx
	  built-in IRDA interface which can support both SIR and FIR.
	  This driver relies on platform specific helper routines so
	  available capabilities may vary from one PXA2xx target to
	  another.

config MCS_FIR
	tristate "MosChip MCS7780 IrDA-USB dongle"
	depends on IRDA && USB
	select CRC32
	help
	  Say Y or M here if you want to build support for the MosChip
	  MCS7780 IrDA-USB bridge device driver.

	  USB bridge based on the MosChip MCS7780 don't conform to the
	  IrDA-USB device class specification, and therefore need their
	  own specific driver. Those dongles support SIR and FIR (4Mbps)
	  speeds.

	  To compile it as a module, choose M here: the module will be called
	  mcs7780.

endmenu
Commit	Line	Data
1da177e4 LT	1	menu "Infrared-port device drivers"
	2	depends on IRDA!=n
	3
	4	comment "SIR device drivers"
	5
	6	config IRTTY_SIR
	7	tristate "IrTTY (uses Linux serial driver)"
4f73bc4d	8	depends on IRDA && TTY
1da177e4 LT	9	help
	10	Say Y here if you want to build support for the IrTTY line
	11	discipline. To compile it as a module, choose M here: the module
	12	will be called irtty-sir. IrTTY makes it possible to use Linux's
	13	own serial driver for all IrDA ports that are 16550 compatible.
	14	Most IrDA chips are 16550 compatible so you should probably say Y
	15	to this option. Using IrTTY will however limit the speed of the
	16	connection to 115200 bps (IrDA SIR mode).
	17
	18	If unsure, say Y.
	19
d510fe70 GY	20	config BFIN_SIR
	21	tristate "Blackfin SIR on UART"
	22	depends on BLACKFIN && IRDA
	23	default n
	24	help
	25	Say Y here if your want to enable SIR function on Blackfin UART
	26	devices.
	27
	28	To activate this driver you can start irattach like:
	29	"irattach irda0 -s"
	30
	31	Saying M, it will be built as a module named bfin_sir.
	32
	33	Note that you need to turn off one of the serial drivers for SIR
	34	to use that UART.
	35
	36	config BFIN_SIR0
	37	bool "Blackfin SIR on UART0"
	38	depends on BFIN_SIR && !SERIAL_BFIN_UART0
	39
	40	config BFIN_SIR1
	41	bool "Blackfin SIR on UART1"
	42	depends on BFIN_SIR && !SERIAL_BFIN_UART1 && (!BF531 && !BF532 && !BF533 && !BF561)
	43
	44	config BFIN_SIR2
	45	bool "Blackfin SIR on UART2"
	46	depends on BFIN_SIR && !SERIAL_BFIN_UART2 && (BF54x \|\| BF538 \|\| BF539)
	47
	48	config BFIN_SIR3
	49	bool "Blackfin SIR on UART3"
	50	depends on BFIN_SIR && !SERIAL_BFIN_UART3 && (BF54x)
	51
	52	choice
	53	prompt "SIR Mode"
	54	depends on BFIN_SIR
	55	default SIR_BFIN_DMA
	56
	57	config SIR_BFIN_DMA
	58	bool "DMA mode"
	59	depends on !DMA_UNCACHED_NONE
	60
	61	config SIR_BFIN_PIO
	62	bool "PIO mode"
	63	endchoice
	64
2a6ace1b KM	65	config SH_SIR
	66	tristate "SuperH SIR on UART"
	67	depends on IRDA && SUPERH && \
	68	(CPU_SUBTYPE_SH7722 \|\| CPU_SUBTYPE_SH7723 \|\| \
	69	CPU_SUBTYPE_SH7724)
	70	default n
	71	help
	72	Say Y here if your want to enable SIR function on SuperH UART
	73	devices.
	74
90e8c72e KM	75	comment "Dongle support"
90e8c72e KM	76
1da177e4 LT	77	config DONGLE
	78	bool "Serial dongle support"
	79	depends on IRTTY_SIR
	80	help
	81	Say Y here if you have an infrared device that connects to your
	82	computer's serial port. These devices are called dongles. Then say Y
	83	or M to the driver for your particular dongle below.
	84
	85	Note that the answer to this question won't directly affect the
	86	kernel: saying N will just cause the configurator to skip all
	87	the questions about serial dongles.
	88
	89	config ESI_DONGLE
	90	tristate "ESI JetEye PC dongle"
56bc348c	91	depends on IRTTY_SIR && DONGLE && IRDA
1da177e4 LT	92	help
	93	Say Y here if you want to build support for the Extended Systems
	94	JetEye PC dongle. To compile it as a module, choose M here. The ESI
	95	dongle attaches to the normal 9-pin serial port connector, and can
	96	currently only be used by IrTTY. To activate support for ESI
	97	dongles you will have to start irattach like this:
	98	"irattach -d esi".
	99
	100	config ACTISYS_DONGLE
	101	tristate "ACTiSYS IR-220L and IR220L+ dongle"
56bc348c	102	depends on IRTTY_SIR && DONGLE && IRDA
1da177e4 LT	103	help
	104	Say Y here if you want to build support for the ACTiSYS IR-220L and
	105	IR220L+ dongles. To compile it as a module, choose M here. The
	106	ACTiSYS dongles attaches to the normal 9-pin serial port connector,
	107	and can currently only be used by IrTTY. To activate support for
	108	ACTiSYS dongles you will have to start irattach like this:
	109	"irattach -d actisys" or "irattach -d actisys+".
	110
	111	config TEKRAM_DONGLE
	112	tristate "Tekram IrMate 210B dongle"
56bc348c	113	depends on IRTTY_SIR && DONGLE && IRDA
1da177e4 LT	114	help
	115	Say Y here if you want to build support for the Tekram IrMate 210B
	116	dongle. To compile it as a module, choose M here. The Tekram dongle
	117	attaches to the normal 9-pin serial port connector, and can
	118	currently only be used by IrTTY. To activate support for Tekram
	119	dongles you will have to start irattach like this:
	120	"irattach -d tekram".
	121
0ac81ae3 DB	122	config TOIM3232_DONGLE
0ac81ae3 DB	123	tristate "TOIM3232 IrDa dongle"
56bc348c	124	depends on IRTTY_SIR && DONGLE && IRDA
0ac81ae3 DB	125	help
	126	Say Y here if you want to build support for the Vishay/Temic
	127	TOIM3232 and TOIM4232 based dongles.
	128	To compile it as a module, choose M here.
	129
1da177e4 LT	130	config LITELINK_DONGLE
1da177e4 LT	131	tristate "Parallax LiteLink dongle"
56bc348c	132	depends on IRTTY_SIR && DONGLE && IRDA
1da177e4 LT	133	help
	134	Say Y here if you want to build support for the Parallax Litelink
	135	dongle. To compile it as a module, choose M here. The Parallax
	136	dongle attaches to the normal 9-pin serial port connector, and can
	137	currently only be used by IrTTY. To activate support for Parallax
	138	dongles you will have to start irattach like this:
	139	"irattach -d litelink".
	140
	141	config MA600_DONGLE
	142	tristate "Mobile Action MA600 dongle"
91d09454	143	depends on IRTTY_SIR && DONGLE && IRDA
1da177e4 LT	144	help
	145	Say Y here if you want to build support for the Mobile Action MA600
	146	dongle. To compile it as a module, choose M here. The MA600 dongle
	147	attaches to the normal 9-pin serial port connector, and can
	148	currently only be used by IrTTY. The driver should also support
	149	the MA620 USB version of the dongle, if the integrated USB-to-RS232
	150	converter is supported by usbserial. To activate support for
	151	MA600 dongle you will have to start irattach like this:
	152	"irattach -d ma600".
	153
	154	config GIRBIL_DONGLE
	155	tristate "Greenwich GIrBIL dongle"
91d09454	156	depends on IRTTY_SIR && DONGLE && IRDA
1da177e4 LT	157	help
	158	Say Y here if you want to build support for the Greenwich GIrBIL
	159	dongle. If you want to compile it as a module, choose M here.
	160	The Greenwich dongle attaches to the normal 9-pin serial port
	161	connector, and can currently only be used by IrTTY. To activate
	162	support for Greenwich dongles you will have to start irattach
	163	like this: "irattach -d girbil".
	164
	165	config MCP2120_DONGLE
	166	tristate "Microchip MCP2120"
91d09454	167	depends on IRTTY_SIR && DONGLE && IRDA
1da177e4 LT	168	help
	169	Say Y here if you want to build support for the Microchip MCP2120
	170	dongle. If you want to compile it as a module, choose M here.
	171	The MCP2120 dongle attaches to the normal 9-pin serial port
	172	connector, and can currently only be used by IrTTY. To activate
	173	support for MCP2120 dongles you will have to start irattach
	174	like this: "irattach -d mcp2120".
	175
	176	You must build this dongle yourself. For more information see:
	177	<http://www.eyetap.org/~tangf/irda_sir_linux.html>
	178
	179	config OLD_BELKIN_DONGLE
	180	tristate "Old Belkin dongle"
91d09454	181	depends on IRTTY_SIR && DONGLE && IRDA
1da177e4 LT	182	help
	183	Say Y here if you want to build support for the Adaptec Airport 1000
	184	and 2000 dongles. If you want to compile it as a module, choose
	185	M here. Some information is contained in the comments
0348299a	186	at the top of <file:drivers/net/irda/old_belkin-sir.c>.
1da177e4 LT	187
	188	config ACT200L_DONGLE
	189	tristate "ACTiSYS IR-200L dongle"
91d09454	190	depends on IRTTY_SIR && DONGLE && IRDA
1da177e4 LT	191	help
	192	Say Y here if you want to build support for the ACTiSYS IR-200L
	193	dongle. If you want to compile it as a module, choose M here.
	194	The ACTiSYS IR-200L dongle attaches to the normal 9-pin serial
	195	port connector, and can currently only be used by IrTTY.
	196	To activate support for ACTiSYS IR-200L dongle you will have to
	197	start irattach like this: "irattach -d act200l".
	198
a2af421f AVL	199	config KINGSUN_DONGLE
a2af421f AVL	200	tristate "KingSun/DonShine DS-620 IrDA-USB dongle"
91d09454	201	depends on IRDA && USB
a2af421f AVL	202	help
	203	Say Y or M here if you want to build support for the KingSun/DonShine
	204	DS-620 IrDA-USB bridge device driver.
	205
	206	This USB bridge does not conform to the IrDA-USB device class
	207	specification, and therefore needs its own specific driver. This
	208	dongle supports SIR speed only (9600 bps).
	209
	210	To compile it as a module, choose M here: the module will be called
	211	kingsun-sir.
	212
4a1d7c25	213	config KSDAZZLE_DONGLE
91d09454 KC	214	tristate "KingSun Dazzle IrDA-USB dongle"
91d09454 KC	215	depends on IRDA && USB
4a1d7c25 AVL	216	help
	217	Say Y or M here if you want to build support for the KingSun Dazzle
	218	IrDA-USB bridge device driver.
	219
	220	This USB bridge does not conform to the IrDA-USB device class
	221	specification, and therefore needs its own specific driver. This
	222	dongle supports SIR speeds only (9600 through 115200 bps).
e97e2ddf	223
4a1d7c25 AVL	224	To compile it as a module, choose M here: the module will be called
4a1d7c25 AVL	225	ksdazzle-sir.
e97e2ddf	226
4b6aa599	227	config KS959_DONGLE
91d09454 KC	228	tristate "KingSun KS-959 IrDA-USB dongle"
91d09454 KC	229	depends on IRDA && USB
4b6aa599 AVL	230	help
	231	Say Y or M here if you want to build support for the KingSun KS-959
	232	IrDA-USB bridge device driver.
	233
	234	This USB bridge does not conform to the IrDA-USB device class
	235	specification, and therefore needs its own specific driver. This
	236	dongle supports SIR speeds only (9600 through 57600 bps).
	237
	238	To compile it as a module, choose M here: the module will be called
	239	ks959-sir.
	240
1da177e4 LT	241	comment "FIR device drivers"
	242
	243	config USB_IRDA
	244	tristate "IrDA USB dongles"
	245	depends on IRDA && USB
778e6398	246	select FW_LOADER
1da177e4 LT	247	---help---
	248	Say Y here if you want to build support for the USB IrDA FIR Dongle
	249	device driver. To compile it as a module, choose M here: the module
	250	will be called irda-usb. IrDA-USB support the various IrDA USB
47c51431	251	dongles available and most of their peculiarities. Those dongles
1da177e4 LT	252	plug in the USB port of your computer, are plug and play, and
	253	support SIR and FIR (4Mbps) speeds. On the other hand, those
	254	dongles tend to be less efficient than a FIR chipset.
	255
	256	Please note that the driver is still experimental. And of course,
	257	you will need both USB and IrDA support in your kernel...
	258
	259	config SIGMATEL_FIR
91d09454 KC	260	tristate "SigmaTel STIr4200 bridge"
91d09454 KC	261	depends on IRDA && USB
1da177e4 LT	262	select CRC32
	263	---help---
	264	Say Y here if you want to build support for the SigmaTel STIr4200
	265	USB IrDA FIR bridge device driver.
	266
	267	USB bridge based on the SigmaTel STIr4200 don't conform to the
	268	IrDA-USB device class specification, and therefore need their
	269	own specific driver. Those dongles support SIR and FIR (4Mbps)
	270	speeds.
	271
	272	To compile it as a module, choose M here: the module will be called
	273	stir4200.
	274
	275	config NSC_FIR
	276	tristate "NSC PC87108/PC87338"
56c3b7d7	277	depends on IRDA && ISA_DMA_API
1da177e4 LT	278	help
	279	Say Y here if you want to build support for the NSC PC87108 and
	280	PC87338 IrDA chipsets. This driver supports SIR,
	281	MIR and FIR (4Mbps) speeds.
	282
	283	To compile it as a module, choose M here: the module will be called
	284	nsc-ircc.
	285
	286	config WINBOND_FIR
	287	tristate "Winbond W83977AF (IR)"
56c3b7d7	288	depends on IRDA && ISA_DMA_API
1da177e4 LT	289	help
	290	Say Y here if you want to build IrDA support for the Winbond
	291	W83977AF super-io chipset. This driver should be used for the IrDA
	292	chipset in the Corel NetWinder. The driver supports SIR, MIR and
	293	FIR (4Mbps) speeds.
	294
	295	To compile it as a module, choose M here: the module will be called
	296	w83977af_ir.
	297
	298	config TOSHIBA_FIR
	299	tristate "Toshiba Type-O IR Port"
43a41513	300	depends on IRDA && PCI && !64BIT && VIRT_TO_BUS
1da177e4 LT	301	help
	302	Say Y here if you want to build support for the Toshiba Type-O IR
	303	and Donau oboe chipsets. These chipsets are used by the Toshiba
	304	Libretto 100/110CT, Tecra 8100, Portege 7020 and many more laptops.
	305	To compile it as a module, choose M here: the module will be called
	306	donauboe.
	307
	308	config AU1000_FIR
cd671c16	309	tristate "Alchemy IrDA SIR/FIR"
37663860	310	depends on IRDA && MIPS_ALCHEMY
cd671c16	311	help
59bf8964	312	Say Y/M here to build support the IrDA peripheral on the
cd671c16 ML	313	Alchemy Au1000 and Au1100 SoCs.
cd671c16 ML	314	Say M to build a module; it will be called au1k_ir.ko
1da177e4 LT	315
1da177e4 LT	316	config SMC_IRCC_FIR
97076d27 LW	317	tristate "SMSC IrCC"
97076d27 LW	318	depends on IRDA && ISA_DMA_API
1da177e4 LT	319	help
	320	Say Y here if you want to build support for the SMC Infrared
	321	Communications Controller. It is used in a wide variety of
	322	laptops (Fujitsu, Sony, Compaq and some Toshiba).
	323	To compile it as a module, choose M here: the module will be called
	324	smsc-ircc2.o.
	325
	326	config ALI_FIR
91d09454 KC	327	tristate "ALi M5123 FIR"
91d09454 KC	328	depends on IRDA && ISA_DMA_API
1da177e4 LT	329	help
	330	Say Y here if you want to build support for the ALi M5123 FIR
	331	Controller. The ALi M5123 FIR Controller is embedded in ALi M1543C,
47c51431	332	M1535, M1535D, M1535+, M1535D South Bridge. This driver supports
1da177e4 LT	333	SIR, MIR and FIR (4Mbps) speeds.
	334
	335	To compile it as a module, choose M here: the module will be called
	336	ali-ircc.
	337
	338	config VLSI_FIR
91d09454 KC	339	tristate "VLSI 82C147 SIR/MIR/FIR"
91d09454 KC	340	depends on IRDA && PCI
1da177e4 LT	341	help
	342	Say Y here if you want to build support for the VLSI 82C147
	343	PCI-IrDA Controller. This controller is used by the HP OmniBook 800
	344	and 5500 notebooks. The driver provides support for SIR, MIR and
	345	FIR (4Mbps) speeds.
	346
	347	To compile it as a module, choose M here: the module will be called
	348	vlsi_ir.
	349
	350	config SA1100_FIR
	351	tristate "SA1100 Internal IR"
bf95154f	352	depends on ARCH_SA1100 && IRDA && DMA_SA11X0
1da177e4 LT	353
	354	config VIA_FIR
	355	tristate "VIA VT8231/VT1211 SIR/MIR/FIR"
56c3b7d7	356	depends on IRDA && ISA_DMA_API
1da177e4 LT	357	help
	358	Say Y here if you want to build support for the VIA VT8231
	359	and VIA VT1211 IrDA controllers, found on the motherboards using
392a8b7e	360	those VIA chipsets. To use this controller, you will need
1da177e4 LT	361	to plug a specific 5 pins FIR IrDA dongle in the specific
	362	motherboard connector. The driver provides support for SIR, MIR
	363	and FIR (4Mbps) speeds.
	364
	365	You will need to specify the 'dongle_id' module parameter to
	366	indicate the FIR dongle attached to the controller.
	367
	368	To compile it as a module, choose M here: the module will be called
	369	via-ircc.
	370
6f475c01 NP	371	config PXA_FICP
	372	tristate "Intel PXA2xx Internal FICP"
	373	depends on ARCH_PXA && IRDA
	374	help
	375	Say Y or M here if you want to build support for the PXA2xx
	376	built-in IRDA interface which can support both SIR and FIR.
	377	This driver relies on platform specific helper routines so
	378	available capabilities may vary from one PXA2xx target to
	379	another.
	380
c6ae522e SO	381	config MCS_FIR
c6ae522e SO	382	tristate "MosChip MCS7780 IrDA-USB dongle"
91d09454	383	depends on IRDA && USB
1420a4fa	384	select CRC32
c6ae522e SO	385	help
	386	Say Y or M here if you want to build support for the MosChip
	387	MCS7780 IrDA-USB bridge device driver.
	388
	389	USB bridge based on the MosChip MCS7780 don't conform to the
	390	IrDA-USB device class specification, and therefore need their
	391	own specific driver. Those dongles support SIR and FIR (4Mbps)
	392	speeds.
	393
	394	To compile it as a module, choose M here: the module will be called
	395	mcs7780.
	396
1da177e4 LT	397	endmenu
1da177e4 LT	398