projects / deliverable / linux.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6
[deliverable/linux.git] / drivers / net / irda / ali-ircc.c
CommitLineData
1da177e4
LT		 1/*********************************************************************
2 *
3 * Filename: ali-ircc.h
4 * Version: 0.5
5 * Description: Driver for the ALI M1535D and M1543C FIR Controller
6 * Status: Experimental.
7 * Author: Benjamin Kong <benjamin_kong@ali.com.tw>
8 * Created at: 2000/10/16 03:46PM
9 * Modified at: 2001/1/3 02:55PM
10 * Modified by: Benjamin Kong <benjamin_kong@ali.com.tw>
11 * Modified at: 2003/11/6 and support for ALi south-bridge chipsets M1563
12 * Modified by: Clear Zhang <clear_zhang@ali.com.tw>
13 *
14 * Copyright (c) 2000 Benjamin Kong <benjamin_kong@ali.com.tw>
15 * All Rights Reserved
16 *
17 * This program is free software; you can redistribute it and/or
18 * modify it under the terms of the GNU General Public License as
19 * published by the Free Software Foundation; either version 2 of
20 * the License, or (at your option) any later version.
21 *
22 ********************************************************************/
23
24#include <linux/module.h>
25
26#include <linux/kernel.h>
27#include <linux/types.h>
28#include <linux/skbuff.h>
29#include <linux/netdevice.h>
30#include <linux/ioport.h>
31#include <linux/delay.h>
32#include <linux/slab.h>
33#include <linux/init.h>
34#include <linux/rtnetlink.h>
35#include <linux/serial_reg.h>
36#include <linux/dma-mapping.h>
898b1d16 37#include <linux/platform_device.h>
1da177e4
LT		 38
39#include <asm/io.h>
40#include <asm/dma.h>
41#include <asm/byteorder.h>
42
1da177e4
LT		 43#include <net/irda/wrapper.h>
44#include <net/irda/irda.h>
45#include <net/irda/irda_device.h>
46
47#include "ali-ircc.h"
48
49#define CHIP_IO_EXTENT 8
50#define BROKEN_DONGLE_ID
51
898b1d16
SO		 52#define ALI_IRCC_DRIVER_NAME "ali-ircc"
53
54/* Power Management */
55static int ali_ircc_suspend(struct platform_device *dev, pm_message_t state);
56static int ali_ircc_resume(struct platform_device *dev);
57
58static struct platform_driver ali_ircc_driver = {
59 .suspend = ali_ircc_suspend,
60 .resume = ali_ircc_resume,
61 .driver = {
62 .name = ALI_IRCC_DRIVER_NAME,
72abb461 63 .owner = THIS_MODULE,
898b1d16
SO		 64 },
65};
1da177e4
LT		 66
67/* Module parameters */
68static int qos_mtt_bits = 0x07; /* 1 ms or more */
69
70/* Use BIOS settions by default, but user may supply module parameters */
71static unsigned int io[] = { ~0, ~0, ~0, ~0 };
72static unsigned int irq[] = { 0, 0, 0, 0 };
73static unsigned int dma[] = { 0, 0, 0, 0 };
74
75static int ali_ircc_probe_53(ali_chip_t *chip, chipio_t *info);
76static int ali_ircc_init_43(ali_chip_t *chip, chipio_t *info);
77static int ali_ircc_init_53(ali_chip_t *chip, chipio_t *info);
78
79/* These are the currently known ALi sourth-bridge chipsets, the only one difference
80 * is that M1543C doesn't support HP HDSL-3600
81 */
82static ali_chip_t chips[] =
83{
84 { "M1543", { 0x3f0, 0x370 }, 0x51, 0x23, 0x20, 0x43, ali_ircc_probe_53, ali_ircc_init_43 },
85 { "M1535", { 0x3f0, 0x370 }, 0x51, 0x23, 0x20, 0x53, ali_ircc_probe_53, ali_ircc_init_53 },
86 { "M1563", { 0x3f0, 0x370 }, 0x51, 0x23, 0x20, 0x63, ali_ircc_probe_53, ali_ircc_init_53 },
87 { NULL }
88};
89
90/* Max 4 instances for now */
91static struct ali_ircc_cb *dev_self[] = { NULL, NULL, NULL, NULL };
92
93/* Dongle Types */
94static char *dongle_types[] = {
95 "TFDS6000",
96 "HP HSDL-3600",
97 "HP HSDL-1100",
98 "No dongle connected",
99};
100
101/* Some prototypes */
102static int ali_ircc_open(int i, chipio_t *info);
103
104static int ali_ircc_close(struct ali_ircc_cb *self);
105
106static int ali_ircc_setup(chipio_t *info);
107static int ali_ircc_is_receiving(struct ali_ircc_cb *self);
108static int ali_ircc_net_open(struct net_device *dev);
109static int ali_ircc_net_close(struct net_device *dev);
110static int ali_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
1da177e4 111static void ali_ircc_change_speed(struct ali_ircc_cb *self, __u32 baud);
1da177e4
LT		 112
113/* SIR function */
114static int ali_ircc_sir_hard_xmit(struct sk_buff *skb, struct net_device *dev);
115static irqreturn_t ali_ircc_sir_interrupt(struct ali_ircc_cb *self);
116static void ali_ircc_sir_receive(struct ali_ircc_cb *self);
117static void ali_ircc_sir_write_wakeup(struct ali_ircc_cb *self);
118static int ali_ircc_sir_write(int iobase, int fifo_size, __u8 *buf, int len);
119static void ali_ircc_sir_change_speed(struct ali_ircc_cb *priv, __u32 speed);
120
121/* FIR function */
122static int ali_ircc_fir_hard_xmit(struct sk_buff *skb, struct net_device *dev);
123static void ali_ircc_fir_change_speed(struct ali_ircc_cb *priv, __u32 speed);
124static irqreturn_t ali_ircc_fir_interrupt(struct ali_ircc_cb *self);
125static int ali_ircc_dma_receive(struct ali_ircc_cb *self);
126static int ali_ircc_dma_receive_complete(struct ali_ircc_cb *self);
127static int ali_ircc_dma_xmit_complete(struct ali_ircc_cb *self);
128static void ali_ircc_dma_xmit(struct ali_ircc_cb *self);
129
130/* My Function */
131static int ali_ircc_read_dongle_id (int i, chipio_t *info);
132static void ali_ircc_change_dongle_speed(struct ali_ircc_cb *priv, int speed);
133
134/* ALi chip function */
135static void SIR2FIR(int iobase);
136static void FIR2SIR(int iobase);
137static void SetCOMInterrupts(struct ali_ircc_cb *self , unsigned char enable);
138
139/*
140 * Function ali_ircc_init ()
141 *
142 * Initialize chip. Find out whay kinds of chips we are dealing with
143 * and their configuation registers address
144 */
145static int __init ali_ircc_init(void)
146{
147 ali_chip_t *chip;
148 chipio_t info;
9c6c6795 149 int ret;
1da177e4
LT		 150 int cfg, cfg_base;
151 int reg, revision;
152 int i = 0;
153
a97a6f10 154 IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__);
898b1d16
SO		 155
156 ret = platform_driver_register(&ali_ircc_driver);
157 if (ret) {
158 IRDA_ERROR("%s, Can't register driver!\n",
159 ALI_IRCC_DRIVER_NAME);
160 return ret;
161 }
162
9c6c6795 163 ret = -ENODEV;
1da177e4
LT		 164
165 /* Probe for all the ALi chipsets we know about */
166 for (chip= chips; chip->name; chip++, i++)
167 {
a97a6f10 168 IRDA_DEBUG(2, "%s(), Probing for %s ...\n", __func__, chip->name);
1da177e4
LT		 169
170 /* Try all config registers for this chip */
171 for (cfg=0; cfg<2; cfg++)
172 {
173 cfg_base = chip->cfg[cfg];
174 if (!cfg_base)
175 continue;
176
177 memset(&info, 0, sizeof(chipio_t));
178 info.cfg_base = cfg_base;
179 info.fir_base = io[i];
180 info.dma = dma[i];
181 info.irq = irq[i];
182
183
184 /* Enter Configuration */
185 outb(chip->entr1, cfg_base);
186 outb(chip->entr2, cfg_base);
187
188 /* Select Logical Device 5 Registers (UART2) */
189 outb(0x07, cfg_base);
190 outb(0x05, cfg_base+1);
191
192 /* Read Chip Identification Register */
193 outb(chip->cid_index, cfg_base);
194 reg = inb(cfg_base+1);
195
196 if (reg == chip->cid_value)
197 {
a97a6f10 198 IRDA_DEBUG(2, "%s(), Chip found at 0x%03x\n", __func__, cfg_base);
1da177e4
LT		 199
200 outb(0x1F, cfg_base);
201 revision = inb(cfg_base+1);
a97a6f10 202 IRDA_DEBUG(2, "%s(), Found %s chip, revision=%d\n", __func__,
1da177e4
LT		 203 chip->name, revision);
204
205 /*
206 * If the user supplies the base address, then
207 * we init the chip, if not we probe the values
208 * set by the BIOS
209 */
210 if (io[i] < 2000)
211 {
212 chip->init(chip, &info);
213 }
214 else
215 {
216 chip->probe(chip, &info);
217 }
218
219 if (ali_ircc_open(i, &info) == 0)
220 ret = 0;
221 i++;
222 }
223 else
224 {
a97a6f10 225 IRDA_DEBUG(2, "%s(), No %s chip at 0x%03x\n", __func__, chip->name, cfg_base);
1da177e4
LT		 226 }
227 /* Exit configuration */
228 outb(0xbb, cfg_base);
229 }
230 }
231
a97a6f10 232 IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __func__);
898b1d16
SO		 233
234 if (ret)
235 platform_driver_unregister(&ali_ircc_driver);
236
1da177e4
LT		 237 return ret;
238}
239
240/*
241 * Function ali_ircc_cleanup ()
242 *
243 * Close all configured chips
244 *
245 */
246static void __exit ali_ircc_cleanup(void)
247{
248 int i;
249
a97a6f10 250 IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__);
1da177e4 251
9c3bd683 252 for (i=0; i < ARRAY_SIZE(dev_self); i++) {
1da177e4
LT		 253 if (dev_self[i])
254 ali_ircc_close(dev_self[i]);
255 }
256
898b1d16
SO		 257 platform_driver_unregister(&ali_ircc_driver);
258
a97a6f10 259 IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __func__);
1da177e4
LT		 260}
261
262/*
263 * Function ali_ircc_open (int i, chipio_t *inf)
264 *
265 * Open driver instance
266 *
267 */
268static int ali_ircc_open(int i, chipio_t *info)
269{
270 struct net_device *dev;
271 struct ali_ircc_cb *self;
1da177e4
LT		 272 int dongle_id;
273 int err;
274
a97a6f10 275 IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__);
9c3bd683
BH		 276
277 if (i >= ARRAY_SIZE(dev_self)) {
278 IRDA_ERROR("%s(), maximum number of supported chips reached!\n",
a97a6f10 279 __func__);
9c3bd683
BH		 280 return -ENOMEM;
281 }
1da177e4
LT		 282
283 /* Set FIR FIFO and DMA Threshold */
284 if ((ali_ircc_setup(info)) == -1)
285 return -1;
286
287 dev = alloc_irdadev(sizeof(*self));
288 if (dev == NULL) {
289 IRDA_ERROR("%s(), can't allocate memory for control block!\n",
a97a6f10 290 __func__);
1da177e4
LT		 291 return -ENOMEM;
292 }
293
4cf1653a 294 self = netdev_priv(dev);
1da177e4
LT		 295 self->netdev = dev;
296 spin_lock_init(&self->lock);
297
298 /* Need to store self somewhere */
299 dev_self[i] = self;
300 self->index = i;
301
302 /* Initialize IO */
303 self->io.cfg_base = info->cfg_base; /* In ali_ircc_probe_53 assign */
304 self->io.fir_base = info->fir_base; /* info->sir_base = info->fir_base */
305 self->io.sir_base = info->sir_base; /* ALi SIR and FIR use the same address */
306 self->io.irq = info->irq;
307 self->io.fir_ext = CHIP_IO_EXTENT;
308 self->io.dma = info->dma;
309 self->io.fifo_size = 16; /* SIR: 16, FIR: 32 Benjamin 2000/11/1 */
310
311 /* Reserve the ioports that we need */
898b1d16
SO		 312 if (!request_region(self->io.fir_base, self->io.fir_ext,
313 ALI_IRCC_DRIVER_NAME)) {
a97a6f10 314 IRDA_WARNING("%s(), can't get iobase of 0x%03x\n", __func__,
1da177e4
LT		 315 self->io.fir_base);
316 err = -ENODEV;
317 goto err_out1;
318 }
319
320 /* Initialize QoS for this device */
321 irda_init_max_qos_capabilies(&self->qos);
322
323 /* The only value we must override it the baudrate */
324 self->qos.baud_rate.bits = IR_9600|IR_19200|IR_38400|IR_57600|
325 IR_115200|IR_576000|IR_1152000|(IR_4000000 << 8); // benjamin 2000/11/8 05:27PM
326
327 self->qos.min_turn_time.bits = qos_mtt_bits;
328
329 irda_qos_bits_to_value(&self->qos);
330
331 /* Max DMA buffer size needed = (data_size + 6) * (window_size) + 6; */
332 self->rx_buff.truesize = 14384;
333 self->tx_buff.truesize = 14384;
334
335 /* Allocate memory if needed */
336 self->rx_buff.head =
337 dma_alloc_coherent(NULL, self->rx_buff.truesize,
338 &self->rx_buff_dma, GFP_KERNEL);
339 if (self->rx_buff.head == NULL) {
340 err = -ENOMEM;
341 goto err_out2;
342 }
343 memset(self->rx_buff.head, 0, self->rx_buff.truesize);
344
345 self->tx_buff.head =
346 dma_alloc_coherent(NULL, self->tx_buff.truesize,
347 &self->tx_buff_dma, GFP_KERNEL);
348 if (self->tx_buff.head == NULL) {
349 err = -ENOMEM;
350 goto err_out3;
351 }
352 memset(self->tx_buff.head, 0, self->tx_buff.truesize);
353
354 self->rx_buff.in_frame = FALSE;
355 self->rx_buff.state = OUTSIDE_FRAME;
356 self->tx_buff.data = self->tx_buff.head;
357 self->rx_buff.data = self->rx_buff.head;
358
359 /* Reset Tx queue info */
360 self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0;
361 self->tx_fifo.tail = self->tx_buff.head;
362
1da177e4
LT		 363 /* Override the network functions we need to use */
364 dev->hard_start_xmit = ali_ircc_sir_hard_xmit;
365 dev->open = ali_ircc_net_open;
366 dev->stop = ali_ircc_net_close;
367 dev->do_ioctl = ali_ircc_net_ioctl;
1da177e4
LT		 368
369 err = register_netdev(dev);
370 if (err) {
a97a6f10 371 IRDA_ERROR("%s(), register_netdev() failed!\n", __func__);
1da177e4
LT		 372 goto err_out4;
373 }
374 IRDA_MESSAGE("IrDA: Registered device %s\n", dev->name);
375
376 /* Check dongle id */
377 dongle_id = ali_ircc_read_dongle_id(i, info);
a97a6f10 378 IRDA_MESSAGE("%s(), %s, Found dongle: %s\n", __func__,
898b1d16 379 ALI_IRCC_DRIVER_NAME, dongle_types[dongle_id]);
1da177e4
LT		 380
381 self->io.dongle_id = dongle_id;
1da177e4 382
a97a6f10 383 IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __func__);
1da177e4
LT		 384
385 return 0;
386
387 err_out4:
388 dma_free_coherent(NULL, self->tx_buff.truesize,
389 self->tx_buff.head, self->tx_buff_dma);
390 err_out3:
391 dma_free_coherent(NULL, self->rx_buff.truesize,
392 self->rx_buff.head, self->rx_buff_dma);
393 err_out2:
394 release_region(self->io.fir_base, self->io.fir_ext);
395 err_out1:
396 dev_self[i] = NULL;
397 free_netdev(dev);
398 return err;
399}
400
401
402/*
403 * Function ali_ircc_close (self)
404 *
405 * Close driver instance
406 *
407 */
408static int __exit ali_ircc_close(struct ali_ircc_cb *self)
409{
410 int iobase;
411
a97a6f10 412 IRDA_DEBUG(4, "%s(), ---------------- Start ----------------\n", __func__);
1da177e4
LT		 413
414 IRDA_ASSERT(self != NULL, return -1;);
415
416 iobase = self->io.fir_base;
417
418 /* Remove netdevice */
419 unregister_netdev(self->netdev);
420
421 /* Release the PORT that this driver is using */
a97a6f10 422 IRDA_DEBUG(4, "%s(), Releasing Region %03x\n", __func__, self->io.fir_base);
1da177e4
LT		 423 release_region(self->io.fir_base, self->io.fir_ext);
424
425 if (self->tx_buff.head)
426 dma_free_coherent(NULL, self->tx_buff.truesize,
427 self->tx_buff.head, self->tx_buff_dma);
428
429 if (self->rx_buff.head)
430 dma_free_coherent(NULL, self->rx_buff.truesize,
431 self->rx_buff.head, self->rx_buff_dma);
432
433 dev_self[self->index] = NULL;
434 free_netdev(self->netdev);
435
a97a6f10 436 IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __func__);
1da177e4
LT		 437
438 return 0;
439}
440
441/*
442 * Function ali_ircc_init_43 (chip, info)
443 *
444 * Initialize the ALi M1543 chip.
445 */
446static int ali_ircc_init_43(ali_chip_t *chip, chipio_t *info)
447{
448 /* All controller information like I/O address, DMA channel, IRQ
449 * are set by BIOS
450 */
451
452 return 0;
453}
454
455/*
456 * Function ali_ircc_init_53 (chip, info)
457 *
458 * Initialize the ALi M1535 chip.
459 */
460static int ali_ircc_init_53(ali_chip_t *chip, chipio_t *info)
461{
462 /* All controller information like I/O address, DMA channel, IRQ
463 * are set by BIOS
464 */
465
466 return 0;
467}
468
469/*
470 * Function ali_ircc_probe_53 (chip, info)
471 *
472 * Probes for the ALi M1535D or M1535
473 */
474static int ali_ircc_probe_53(ali_chip_t *chip, chipio_t *info)
475{
476 int cfg_base = info->cfg_base;
477 int hi, low, reg;
478
a97a6f10 479 IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__);
1da177e4
LT		 480
481 /* Enter Configuration */
482 outb(chip->entr1, cfg_base);
483 outb(chip->entr2, cfg_base);
484
485 /* Select Logical Device 5 Registers (UART2) */
486 outb(0x07, cfg_base);
487 outb(0x05, cfg_base+1);
488
489 /* Read address control register */
490 outb(0x60, cfg_base);
491 hi = inb(cfg_base+1);
492 outb(0x61, cfg_base);
493 low = inb(cfg_base+1);
494 info->fir_base = (hi<<8) + low;
495
496 info->sir_base = info->fir_base;
497
a97a6f10 498 IRDA_DEBUG(2, "%s(), probing fir_base=0x%03x\n", __func__, info->fir_base);
1da177e4
LT		 499
500 /* Read IRQ control register */
501 outb(0x70, cfg_base);
502 reg = inb(cfg_base+1);
503 info->irq = reg & 0x0f;
a97a6f10 504 IRDA_DEBUG(2, "%s(), probing irq=%d\n", __func__, info->irq);
1da177e4
LT		 505
506 /* Read DMA channel */
507 outb(0x74, cfg_base);
508 reg = inb(cfg_base+1);
509 info->dma = reg & 0x07;
510
511 if(info->dma == 0x04)
a97a6f10 512 IRDA_WARNING("%s(), No DMA channel assigned !\n", __func__);
1da177e4 513 else
a97a6f10 514 IRDA_DEBUG(2, "%s(), probing dma=%d\n", __func__, info->dma);
1da177e4
LT		 515
516 /* Read Enabled Status */
517 outb(0x30, cfg_base);
518 reg = inb(cfg_base+1);
519 info->enabled = (reg & 0x80) && (reg & 0x01);
a97a6f10 520 IRDA_DEBUG(2, "%s(), probing enabled=%d\n", __func__, info->enabled);
1da177e4
LT		 521
522 /* Read Power Status */
523 outb(0x22, cfg_base);
524 reg = inb(cfg_base+1);
525 info->suspended = (reg & 0x20);
a97a6f10 526 IRDA_DEBUG(2, "%s(), probing suspended=%d\n", __func__, info->suspended);
1da177e4
LT		 527
528 /* Exit configuration */
529 outb(0xbb, cfg_base);
530
a97a6f10 531 IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __func__);
1da177e4
LT		 532
533 return 0;
534}
535
536/*
537 * Function ali_ircc_setup (info)
538 *
539 * Set FIR FIFO and DMA Threshold
540 * Returns non-negative on success.
541 *
542 */
543static int ali_ircc_setup(chipio_t *info)
544{
545 unsigned char tmp;
546 int version;
547 int iobase = info->fir_base;
548
a97a6f10 549 IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__);
1da177e4
LT		 550
551 /* Locking comments :
552 * Most operations here need to be protected. We are called before
553 * the device instance is created in ali_ircc_open(), therefore
554 * nobody can bother us - Jean II */
555
556 /* Switch to FIR space */
557 SIR2FIR(iobase);
558
559 /* Master Reset */
560 outb(0x40, iobase+FIR_MCR); // benjamin 2000/11/30 11:45AM
561
562 /* Read FIR ID Version Register */
563 switch_bank(iobase, BANK3);
564 version = inb(iobase+FIR_ID_VR);
565
566 /* Should be 0x00 in the M1535/M1535D */
567 if(version != 0x00)
568 {
898b1d16
SO		 569 IRDA_ERROR("%s, Wrong chip version %02x\n",
570 ALI_IRCC_DRIVER_NAME, version);
1da177e4
LT		 571 return -1;
572 }
573
1da177e4
LT		 574 /* Set FIR FIFO Threshold Register */
575 switch_bank(iobase, BANK1);
576 outb(RX_FIFO_Threshold, iobase+FIR_FIFO_TR);
577
578 /* Set FIR DMA Threshold Register */
579 outb(RX_DMA_Threshold, iobase+FIR_DMA_TR);
580
581 /* CRC enable */
582 switch_bank(iobase, BANK2);
583 outb(inb(iobase+FIR_IRDA_CR) | IRDA_CR_CRC, iobase+FIR_IRDA_CR);
584
585 /* NDIS driver set TX Length here BANK2 Alias 3, Alias4*/
586
587 /* Switch to Bank 0 */
588 switch_bank(iobase, BANK0);
589
590 tmp = inb(iobase+FIR_LCR_B);
591 tmp &=~0x20; // disable SIP
592 tmp |= 0x80; // these two steps make RX mode
593 tmp &= 0xbf;
594 outb(tmp, iobase+FIR_LCR_B);
595
596 /* Disable Interrupt */
597 outb(0x00, iobase+FIR_IER);
598
599
600 /* Switch to SIR space */
601 FIR2SIR(iobase);
602
898b1d16
SO		 603 IRDA_MESSAGE("%s, driver loaded (Benjamin Kong)\n",
604 ALI_IRCC_DRIVER_NAME);
1da177e4
LT		 605
606 /* Enable receive interrupts */
607 // outb(UART_IER_RDI, iobase+UART_IER); //benjamin 2000/11/23 01:25PM
608 // Turn on the interrupts in ali_ircc_net_open
609
a97a6f10 610 IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__);
1da177e4
LT		 611
612 return 0;
613}
614
615/*
616 * Function ali_ircc_read_dongle_id (int index, info)
617 *
618 * Try to read dongle indentification. This procedure needs to be executed
619 * once after power-on/reset. It also needs to be used whenever you suspect
620 * that the user may have plugged/unplugged the IrDA Dongle.
621 */
622static int ali_ircc_read_dongle_id (int i, chipio_t *info)
623{
624 int dongle_id, reg;
625 int cfg_base = info->cfg_base;
626
a97a6f10 627 IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__);
1da177e4
LT		 628
629 /* Enter Configuration */
630 outb(chips[i].entr1, cfg_base);
631 outb(chips[i].entr2, cfg_base);
632
633 /* Select Logical Device 5 Registers (UART2) */
634 outb(0x07, cfg_base);
635 outb(0x05, cfg_base+1);
636
637 /* Read Dongle ID */
638 outb(0xf0, cfg_base);
639 reg = inb(cfg_base+1);
640 dongle_id = ((reg>>6)&0x02) | ((reg>>5)&0x01);
a97a6f10 641 IRDA_DEBUG(2, "%s(), probing dongle_id=%d, dongle_types=%s\n", __func__,
1da177e4
LT		 642 dongle_id, dongle_types[dongle_id]);
643
644 /* Exit configuration */
645 outb(0xbb, cfg_base);
646
a97a6f10 647 IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__);
1da177e4
LT		 648
649 return dongle_id;
650}
651
652/*
653 * Function ali_ircc_interrupt (irq, dev_id, regs)
654 *
655 * An interrupt from the chip has arrived. Time to do some work
656 *
657 */
7d12e780 658static irqreturn_t ali_ircc_interrupt(int irq, void *dev_id)
1da177e4 659{
c31f28e7 660 struct net_device *dev = dev_id;
1da177e4
LT		 661 struct ali_ircc_cb *self;
662 int ret;
663
a97a6f10 664 IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__);
1da177e4 665
4cf1653a 666 self = netdev_priv(dev);
1da177e4
LT		 667
668 spin_lock(&self->lock);
669
670 /* Dispatch interrupt handler for the current speed */
671 if (self->io.speed > 115200)
672 ret = ali_ircc_fir_interrupt(self);
673 else
674 ret = ali_ircc_sir_interrupt(self);
675
676 spin_unlock(&self->lock);
677
a97a6f10 678 IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__);
1da177e4
LT		 679 return ret;
680}
681/*
682 * Function ali_ircc_fir_interrupt(irq, struct ali_ircc_cb *self)
683 *
684 * Handle MIR/FIR interrupt
685 *
686 */
687static irqreturn_t ali_ircc_fir_interrupt(struct ali_ircc_cb *self)
688{
689 __u8 eir, OldMessageCount;
690 int iobase, tmp;
691
a97a6f10 692 IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__);
1da177e4
LT		 693
694 iobase = self->io.fir_base;
695
696 switch_bank(iobase, BANK0);
697 self->InterruptID = inb(iobase+FIR_IIR);
698 self->BusStatus = inb(iobase+FIR_BSR);
699
700 OldMessageCount = (self->LineStatus + 1) & 0x07;
701 self->LineStatus = inb(iobase+FIR_LSR);
702 //self->ier = inb(iobase+FIR_IER); 2000/12/1 04:32PM
703 eir = self->InterruptID & self->ier; /* Mask out the interesting ones */
704
a97a6f10
HH		 705 IRDA_DEBUG(1, "%s(), self->InterruptID = %x\n", __func__,self->InterruptID);
706 IRDA_DEBUG(1, "%s(), self->LineStatus = %x\n", __func__,self->LineStatus);
707 IRDA_DEBUG(1, "%s(), self->ier = %x\n", __func__,self->ier);
708 IRDA_DEBUG(1, "%s(), eir = %x\n", __func__,eir);
1da177e4
LT		 709
710 /* Disable interrupts */
711 SetCOMInterrupts(self, FALSE);
712
713 /* Tx or Rx Interrupt */
714
715 if (eir & IIR_EOM)
716 {
717 if (self->io.direction == IO_XMIT) /* TX */
718 {
a97a6f10 719 IRDA_DEBUG(1, "%s(), ******* IIR_EOM (Tx) *******\n", __func__);
1da177e4
LT		 720
721 if(ali_ircc_dma_xmit_complete(self))
722 {
723 if (irda_device_txqueue_empty(self->netdev))
724 {
725 /* Prepare for receive */
726 ali_ircc_dma_receive(self);
727 self->ier = IER_EOM;
728 }
729 }
730 else
731 {
732 self->ier = IER_EOM;
733 }
734
735 }
736 else /* RX */
737 {
a97a6f10 738 IRDA_DEBUG(1, "%s(), ******* IIR_EOM (Rx) *******\n", __func__);
1da177e4
LT		 739
740 if(OldMessageCount > ((self->LineStatus+1) & 0x07))
741 {
742 self->rcvFramesOverflow = TRUE;
a97a6f10 743 IRDA_DEBUG(1, "%s(), ******* self->rcvFramesOverflow = TRUE ******** \n", __func__);
1da177e4
LT		 744 }
745
746 if (ali_ircc_dma_receive_complete(self))
747 {
a97a6f10 748 IRDA_DEBUG(1, "%s(), ******* receive complete ******** \n", __func__);
1da177e4
LT		 749
750 self->ier = IER_EOM;
751 }
752 else
753 {
a97a6f10 754 IRDA_DEBUG(1, "%s(), ******* Not receive complete ******** \n", __func__);
1da177e4
LT		 755
756 self->ier = IER_EOM | IER_TIMER;
757 }
758
759 }
760 }
761 /* Timer Interrupt */
762 else if (eir & IIR_TIMER)
763 {
764 if(OldMessageCount > ((self->LineStatus+1) & 0x07))
765 {
766 self->rcvFramesOverflow = TRUE;
a97a6f10 767 IRDA_DEBUG(1, "%s(), ******* self->rcvFramesOverflow = TRUE ******* \n", __func__);
1da177e4
LT		 768 }
769 /* Disable Timer */
770 switch_bank(iobase, BANK1);
771 tmp = inb(iobase+FIR_CR);
772 outb( tmp& ~CR_TIMER_EN, iobase+FIR_CR);
773
774 /* Check if this is a Tx timer interrupt */
775 if (self->io.direction == IO_XMIT)
776 {
777 ali_ircc_dma_xmit(self);
778
779 /* Interrupt on EOM */
780 self->ier = IER_EOM;
781
782 }
783 else /* Rx */
784 {
785 if(ali_ircc_dma_receive_complete(self))
786 {
787 self->ier = IER_EOM;
788 }
789 else
790 {
791 self->ier = IER_EOM | IER_TIMER;
792 }
793 }
794 }
795
796 /* Restore Interrupt */
797 SetCOMInterrupts(self, TRUE);
798
a97a6f10 799 IRDA_DEBUG(1, "%s(), ----------------- End ---------------\n", __func__);
1da177e4
LT		 800 return IRQ_RETVAL(eir);
801}
802
803/*
804 * Function ali_ircc_sir_interrupt (irq, self, eir)
805 *
806 * Handle SIR interrupt
807 *
808 */
809static irqreturn_t ali_ircc_sir_interrupt(struct ali_ircc_cb *self)
810{
811 int iobase;
812 int iir, lsr;
813
a97a6f10 814 IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__);
1da177e4
LT		 815
816 iobase = self->io.sir_base;
817
818 iir = inb(iobase+UART_IIR) & UART_IIR_ID;
819 if (iir) {
820 /* Clear interrupt */
821 lsr = inb(iobase+UART_LSR);
822
a97a6f10 823 IRDA_DEBUG(4, "%s(), iir=%02x, lsr=%02x, iobase=%#x\n", __func__,
1da177e4
LT		 824 iir, lsr, iobase);
825
826 switch (iir)
827 {
828 case UART_IIR_RLSI:
a97a6f10 829 IRDA_DEBUG(2, "%s(), RLSI\n", __func__);
1da177e4
LT		 830 break;
831 case UART_IIR_RDI:
832 /* Receive interrupt */
833 ali_ircc_sir_receive(self);
834 break;
835 case UART_IIR_THRI:
836 if (lsr & UART_LSR_THRE)
837 {
838 /* Transmitter ready for data */
839 ali_ircc_sir_write_wakeup(self);
840 }
841 break;
842 default:
a97a6f10 843 IRDA_DEBUG(0, "%s(), unhandled IIR=%#x\n", __func__, iir);
1da177e4
LT		 844 break;
845 }
846
847 }
848
849
a97a6f10 850 IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__);
1da177e4
LT		 851
852 return IRQ_RETVAL(iir);
853}
854
855
856/*
857 * Function ali_ircc_sir_receive (self)
858 *
859 * Receive one frame from the infrared port
860 *
861 */
862static void ali_ircc_sir_receive(struct ali_ircc_cb *self)
863{
864 int boguscount = 0;
865 int iobase;
866
a97a6f10 867 IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__);
1da177e4
LT		 868 IRDA_ASSERT(self != NULL, return;);
869
870 iobase = self->io.sir_base;
871
872 /*
873 * Receive all characters in Rx FIFO, unwrap and unstuff them.
874 * async_unwrap_char will deliver all found frames
875 */
876 do {
af049081 877 async_unwrap_char(self->netdev, &self->netdev->stats, &self->rx_buff,
1da177e4
LT		 878 inb(iobase+UART_RX));
879
880 /* Make sure we don't stay here too long */
881 if (boguscount++ > 32) {
a97a6f10 882 IRDA_DEBUG(2,"%s(), breaking!\n", __func__);
1da177e4
LT		 883 break;
884 }
885 } while (inb(iobase+UART_LSR) & UART_LSR_DR);
886
a97a6f10 887 IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
1da177e4
LT		 888}
889
890/*
891 * Function ali_ircc_sir_write_wakeup (tty)
892 *
893 * Called by the driver when there's room for more data. If we have
894 * more packets to send, we send them here.
895 *
896 */
897static void ali_ircc_sir_write_wakeup(struct ali_ircc_cb *self)
898{
899 int actual = 0;
900 int iobase;
901
902 IRDA_ASSERT(self != NULL, return;);
903
a97a6f10 904 IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__ );
1da177e4
LT		 905
906 iobase = self->io.sir_base;
907
908 /* Finished with frame? */
909 if (self->tx_buff.len > 0)
910 {
911 /* Write data left in transmit buffer */
912 actual = ali_ircc_sir_write(iobase, self->io.fifo_size,
913 self->tx_buff.data, self->tx_buff.len);
914 self->tx_buff.data += actual;
915 self->tx_buff.len -= actual;
916 }
917 else
918 {
919 if (self->new_speed)
920 {
921 /* We must wait until all data are gone */
922 while(!(inb(iobase+UART_LSR) & UART_LSR_TEMT))
a97a6f10 923 IRDA_DEBUG(1, "%s(), UART_LSR_THRE\n", __func__ );
1da177e4 924
a97a6f10 925 IRDA_DEBUG(1, "%s(), Changing speed! self->new_speed = %d\n", __func__ , self->new_speed);
1da177e4
LT		 926 ali_ircc_change_speed(self, self->new_speed);
927 self->new_speed = 0;
928
929 // benjamin 2000/11/10 06:32PM
930 if (self->io.speed > 115200)
931 {
a97a6f10 932 IRDA_DEBUG(2, "%s(), ali_ircc_change_speed from UART_LSR_TEMT \n", __func__ );
1da177e4
LT		 933
934 self->ier = IER_EOM;
935 // SetCOMInterrupts(self, TRUE);
936 return;
937 }
938 }
939 else
940 {
941 netif_wake_queue(self->netdev);
942 }
943
af049081 944 self->netdev->stats.tx_packets++;
1da177e4
LT		 945
946 /* Turn on receive interrupts */
947 outb(UART_IER_RDI, iobase+UART_IER);
948 }
949
a97a6f10 950 IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
1da177e4
LT		 951}
952
953static void ali_ircc_change_speed(struct ali_ircc_cb *self, __u32 baud)
954{
955 struct net_device *dev = self->netdev;
956 int iobase;
957
a97a6f10 958 IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__ );
1da177e4 959
a97a6f10 960 IRDA_DEBUG(2, "%s(), setting speed = %d \n", __func__ , baud);
1da177e4
LT		 961
962 /* This function *must* be called with irq off and spin-lock.
963 * - Jean II */
964
965 iobase = self->io.fir_base;
966
967 SetCOMInterrupts(self, FALSE); // 2000/11/24 11:43AM
968
969 /* Go to MIR, FIR Speed */
970 if (baud > 115200)
971 {
972
973
974 ali_ircc_fir_change_speed(self, baud);
975
976 /* Install FIR xmit handler*/
977 dev->hard_start_xmit = ali_ircc_fir_hard_xmit;
978
979 /* Enable Interuupt */
980 self->ier = IER_EOM; // benjamin 2000/11/20 07:24PM
981
982 /* Be ready for incomming frames */
983 ali_ircc_dma_receive(self); // benajmin 2000/11/8 07:46PM not complete
984 }
985 /* Go to SIR Speed */
986 else
987 {
988 ali_ircc_sir_change_speed(self, baud);
989
990 /* Install SIR xmit handler*/
991 dev->hard_start_xmit = ali_ircc_sir_hard_xmit;
992 }
993
994
995 SetCOMInterrupts(self, TRUE); // 2000/11/24 11:43AM
996
997 netif_wake_queue(self->netdev);
998
a97a6f10 999 IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
1da177e4
LT		 1000}
1001
1002static void ali_ircc_fir_change_speed(struct ali_ircc_cb *priv, __u32 baud)
1003{
1004
1005 int iobase;
1006 struct ali_ircc_cb *self = (struct ali_ircc_cb *) priv;
1007 struct net_device *dev;
1008
a97a6f10 1009 IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__ );
1da177e4
LT		 1010
1011 IRDA_ASSERT(self != NULL, return;);
1012
1013 dev = self->netdev;
1014 iobase = self->io.fir_base;
1015
a97a6f10 1016 IRDA_DEBUG(1, "%s(), self->io.speed = %d, change to speed = %d\n", __func__ ,self->io.speed,baud);
1da177e4
LT		 1017
1018 /* Come from SIR speed */
1019 if(self->io.speed <=115200)
1020 {
1021 SIR2FIR(iobase);
1022 }
1023
1024 /* Update accounting for new speed */
1025 self->io.speed = baud;
1026
1027 // Set Dongle Speed mode
1028 ali_ircc_change_dongle_speed(self, baud);
1029
a97a6f10 1030 IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
1da177e4
LT		 1031}
1032
1033/*
1034 * Function ali_sir_change_speed (self, speed)
1035 *
1036 * Set speed of IrDA port to specified baudrate
1037 *
1038 */
1039static void ali_ircc_sir_change_speed(struct ali_ircc_cb *priv, __u32 speed)
1040{
1041 struct ali_ircc_cb *self = (struct ali_ircc_cb *) priv;
1042 unsigned long flags;
1043 int iobase;
1044 int fcr; /* FIFO control reg */
1045 int lcr; /* Line control reg */
1046 int divisor;
1047
a97a6f10 1048 IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__ );
1da177e4 1049
a97a6f10 1050 IRDA_DEBUG(1, "%s(), Setting speed to: %d\n", __func__ , speed);
1da177e4
LT		 1051
1052 IRDA_ASSERT(self != NULL, return;);
1053
1054 iobase = self->io.sir_base;
1055
1056 /* Come from MIR or FIR speed */
1057 if(self->io.speed >115200)
1058 {
1059 // Set Dongle Speed mode first
1060 ali_ircc_change_dongle_speed(self, speed);
1061
1062 FIR2SIR(iobase);
1063 }
1064
1065 // Clear Line and Auxiluary status registers 2000/11/24 11:47AM
1066
1067 inb(iobase+UART_LSR);
1068 inb(iobase+UART_SCR);
1069
1070 /* Update accounting for new speed */
1071 self->io.speed = speed;
1072
1073 spin_lock_irqsave(&self->lock, flags);
1074
1075 divisor = 115200/speed;
1076
1077 fcr = UART_FCR_ENABLE_FIFO;
1078
1079 /*
1080 * Use trigger level 1 to avoid 3 ms. timeout delay at 9600 bps, and
1081 * almost 1,7 ms at 19200 bps. At speeds above that we can just forget
1082 * about this timeout since it will always be fast enough.
1083 */
1084 if (self->io.speed < 38400)
1085 fcr |= UART_FCR_TRIGGER_1;
1086 else
1087 fcr |= UART_FCR_TRIGGER_14;
1088
1089 /* IrDA ports use 8N1 */
1090 lcr = UART_LCR_WLEN8;
1091
1092 outb(UART_LCR_DLAB | lcr, iobase+UART_LCR); /* Set DLAB */
1093 outb(divisor & 0xff, iobase+UART_DLL); /* Set speed */
1094 outb(divisor >> 8, iobase+UART_DLM);
1095 outb(lcr, iobase+UART_LCR); /* Set 8N1 */
1096 outb(fcr, iobase+UART_FCR); /* Enable FIFO's */
1097
1098 /* without this, the conection will be broken after come back from FIR speed,
1099 but with this, the SIR connection is harder to established */
1100 outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), iobase+UART_MCR);
1101
1102 spin_unlock_irqrestore(&self->lock, flags);
1103
a97a6f10 1104 IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
1da177e4
LT		 1105}
1106
1107static void ali_ircc_change_dongle_speed(struct ali_ircc_cb *priv, int speed)
1108{
1109
1110 struct ali_ircc_cb *self = (struct ali_ircc_cb *) priv;
1111 int iobase,dongle_id;
1112 int tmp = 0;
1113
a97a6f10 1114 IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__ );
1da177e4
LT		 1115
1116 iobase = self->io.fir_base; /* or iobase = self->io.sir_base; */
1117 dongle_id = self->io.dongle_id;
1118
1119 /* We are already locked, no need to do it again */
1120
a97a6f10 1121 IRDA_DEBUG(1, "%s(), Set Speed for %s , Speed = %d\n", __func__ , dongle_types[dongle_id], speed);
1da177e4
LT		 1122
1123 switch_bank(iobase, BANK2);
1124 tmp = inb(iobase+FIR_IRDA_CR);
1125
1126 /* IBM type dongle */
1127 if(dongle_id == 0)
1128 {
1129 if(speed == 4000000)
1130 {
1131 // __ __
1132 // SD/MODE __| |__ __
1133 // __ __
1134 // IRTX __ __| |__
1135 // T1 T2 T3 T4 T5
1136
1137 tmp &= ~IRDA_CR_HDLC; // HDLC=0
1138 tmp |= IRDA_CR_CRC; // CRC=1
1139
1140 switch_bank(iobase, BANK2);
1141 outb(tmp, iobase+FIR_IRDA_CR);
1142
1143 // T1 -> SD/MODE:0 IRTX:0
1144 tmp &= ~0x09;
1145 tmp |= 0x02;
1146 outb(tmp, iobase+FIR_IRDA_CR);
1147 udelay(2);
1148
1149 // T2 -> SD/MODE:1 IRTX:0
1150 tmp &= ~0x01;
1151 tmp |= 0x0a;
1152 outb(tmp, iobase+FIR_IRDA_CR);
1153 udelay(2);
1154
1155 // T3 -> SD/MODE:1 IRTX:1
1156 tmp |= 0x0b;
1157 outb(tmp, iobase+FIR_IRDA_CR);
1158 udelay(2);
1159
1160 // T4 -> SD/MODE:0 IRTX:1
1161 tmp &= ~0x08;
1162 tmp |= 0x03;
1163 outb(tmp, iobase+FIR_IRDA_CR);
1164 udelay(2);
1165
1166 // T5 -> SD/MODE:0 IRTX:0
1167 tmp &= ~0x09;
1168 tmp |= 0x02;
1169 outb(tmp, iobase+FIR_IRDA_CR);
1170 udelay(2);
1171
1172 // reset -> Normal TX output Signal
1173 outb(tmp & ~0x02, iobase+FIR_IRDA_CR);
1174 }
1175 else /* speed <=1152000 */
1176 {
1177 // __
1178 // SD/MODE __| |__
1179 //
1180 // IRTX ________
1181 // T1 T2 T3
1182
1183 /* MIR 115200, 57600 */
1184 if (speed==1152000)
1185 {
1186 tmp |= 0xA0; //HDLC=1, 1.152Mbps=1
1187 }
1188 else
1189 {
1190 tmp &=~0x80; //HDLC 0.576Mbps
1191 tmp |= 0x20; //HDLC=1,
1192 }
1193
1194 tmp |= IRDA_CR_CRC; // CRC=1
1195
1196 switch_bank(iobase, BANK2);
1197 outb(tmp, iobase+FIR_IRDA_CR);
1198
1199 /* MIR 115200, 57600 */
1200
1201 //switch_bank(iobase, BANK2);
1202 // T1 -> SD/MODE:0 IRTX:0
1203 tmp &= ~0x09;
1204 tmp |= 0x02;
1205 outb(tmp, iobase+FIR_IRDA_CR);
1206 udelay(2);
1207
1208 // T2 -> SD/MODE:1 IRTX:0
1209 tmp &= ~0x01;
1210 tmp |= 0x0a;
1211 outb(tmp, iobase+FIR_IRDA_CR);
1212
1213 // T3 -> SD/MODE:0 IRTX:0
1214 tmp &= ~0x09;
1215 tmp |= 0x02;
1216 outb(tmp, iobase+FIR_IRDA_CR);
1217 udelay(2);
1218
1219 // reset -> Normal TX output Signal
1220 outb(tmp & ~0x02, iobase+FIR_IRDA_CR);
1221 }
1222 }
1223 else if (dongle_id == 1) /* HP HDSL-3600 */
1224 {
1225 switch(speed)
1226 {
1227 case 4000000:
1228 tmp &= ~IRDA_CR_HDLC; // HDLC=0
1229 break;
1230
1231 case 1152000:
1232 tmp |= 0xA0; // HDLC=1, 1.152Mbps=1
1233 break;
1234
1235 case 576000:
1236 tmp &=~0x80; // HDLC 0.576Mbps
1237 tmp |= 0x20; // HDLC=1,
1238 break;
1239 }
1240
1241 tmp |= IRDA_CR_CRC; // CRC=1
1242
1243 switch_bank(iobase, BANK2);
1244 outb(tmp, iobase+FIR_IRDA_CR);
1245 }
1246 else /* HP HDSL-1100 */
1247 {
1248 if(speed <= 115200) /* SIR */
1249 {
1250
1251 tmp &= ~IRDA_CR_FIR_SIN; // HP sin select = 0
1252
1253 switch_bank(iobase, BANK2);
1254 outb(tmp, iobase+FIR_IRDA_CR);
1255 }
1256 else /* MIR FIR */
1257 {
1258
1259 switch(speed)
1260 {
1261 case 4000000:
1262 tmp &= ~IRDA_CR_HDLC; // HDLC=0
1263 break;
1264
1265 case 1152000:
1266 tmp |= 0xA0; // HDLC=1, 1.152Mbps=1
1267 break;
1268
1269 case 576000:
1270 tmp &=~0x80; // HDLC 0.576Mbps
1271 tmp |= 0x20; // HDLC=1,
1272 break;
1273 }
1274
1275 tmp |= IRDA_CR_CRC; // CRC=1
1276 tmp |= IRDA_CR_FIR_SIN; // HP sin select = 1
1277
1278 switch_bank(iobase, BANK2);
1279 outb(tmp, iobase+FIR_IRDA_CR);
1280 }
1281 }
1282
1283 switch_bank(iobase, BANK0);
1284
a97a6f10 1285 IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
1da177e4
LT		 1286}
1287
1288/*
1289 * Function ali_ircc_sir_write (driver)
1290 *
1291 * Fill Tx FIFO with transmit data
1292 *
1293 */
1294static int ali_ircc_sir_write(int iobase, int fifo_size, __u8 *buf, int len)
1295{
1296 int actual = 0;
1297
a97a6f10 1298 IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__ );
1da177e4
LT		 1299
1300 /* Tx FIFO should be empty! */
1301 if (!(inb(iobase+UART_LSR) & UART_LSR_THRE)) {
a97a6f10 1302 IRDA_DEBUG(0, "%s(), failed, fifo not empty!\n", __func__ );
1da177e4
LT		 1303 return 0;
1304 }
1305
1306 /* Fill FIFO with current frame */
1307 while ((fifo_size-- > 0) && (actual < len)) {
1308 /* Transmit next byte */
1309 outb(buf[actual], iobase+UART_TX);
1310
1311 actual++;
1312 }
1313
a97a6f10 1314 IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
1da177e4
LT		 1315 return actual;
1316}
1317
1318/*
1319 * Function ali_ircc_net_open (dev)
1320 *
1321 * Start the device
1322 *
1323 */
1324static int ali_ircc_net_open(struct net_device *dev)
1325{
1326 struct ali_ircc_cb *self;
1327 int iobase;
1328 char hwname[32];
1329
a97a6f10 1330 IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__ );
1da177e4
LT		 1331
1332 IRDA_ASSERT(dev != NULL, return -1;);
1333
4cf1653a 1334 self = netdev_priv(dev);
1da177e4
LT		 1335
1336 IRDA_ASSERT(self != NULL, return 0;);
1337
1338 iobase = self->io.fir_base;
1339
1340 /* Request IRQ and install Interrupt Handler */
1341 if (request_irq(self->io.irq, ali_ircc_interrupt, 0, dev->name, dev))
1342 {
898b1d16
SO		 1343 IRDA_WARNING("%s, unable to allocate irq=%d\n",
1344 ALI_IRCC_DRIVER_NAME,
1da177e4
LT		 1345 self->io.irq);
1346 return -EAGAIN;
1347 }
1348
1349 /*
1350 * Always allocate the DMA channel after the IRQ, and clean up on
1351 * failure.
1352 */
1353 if (request_dma(self->io.dma, dev->name)) {
898b1d16
SO		 1354 IRDA_WARNING("%s, unable to allocate dma=%d\n",
1355 ALI_IRCC_DRIVER_NAME,
1da177e4
LT		 1356 self->io.dma);
1357 free_irq(self->io.irq, self);
1358 return -EAGAIN;
1359 }
1360
1361 /* Turn on interrups */
1362 outb(UART_IER_RDI , iobase+UART_IER);
1363
1364 /* Ready to play! */
1365 netif_start_queue(dev); //benjamin by irport
1366
1367 /* Give self a hardware name */
1368 sprintf(hwname, "ALI-FIR @ 0x%03x", self->io.fir_base);
1369
1370 /*
1371 * Open new IrLAP layer instance, now that everything should be
1372 * initialized properly
1373 */
1374 self->irlap = irlap_open(dev, &self->qos, hwname);
1375
a97a6f10 1376 IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
1da177e4
LT		 1377
1378 return 0;
1379}
1380
1381/*
1382 * Function ali_ircc_net_close (dev)
1383 *
1384 * Stop the device
1385 *
1386 */
1387static int ali_ircc_net_close(struct net_device *dev)
1388{
1389
1390 struct ali_ircc_cb *self;
1391 //int iobase;
1392
a97a6f10 1393 IRDA_DEBUG(4, "%s(), ---------------- Start ----------------\n", __func__ );
1da177e4
LT		 1394
1395 IRDA_ASSERT(dev != NULL, return -1;);
1396
4cf1653a 1397 self = netdev_priv(dev);
1da177e4
LT		 1398 IRDA_ASSERT(self != NULL, return 0;);
1399
1400 /* Stop device */
1401 netif_stop_queue(dev);
1402
1403 /* Stop and remove instance of IrLAP */
1404 if (self->irlap)
1405 irlap_close(self->irlap);
1406 self->irlap = NULL;
1407
1408 disable_dma(self->io.dma);
1409
1410 /* Disable interrupts */
1411 SetCOMInterrupts(self, FALSE);
1412
1413 free_irq(self->io.irq, dev);
1414 free_dma(self->io.dma);
1415
a97a6f10 1416 IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
1da177e4
LT		 1417
1418 return 0;
1419}
1420
1421/*
1422 * Function ali_ircc_fir_hard_xmit (skb, dev)
1423 *
1424 * Transmit the frame
1425 *
1426 */
1427static int ali_ircc_fir_hard_xmit(struct sk_buff *skb, struct net_device *dev)
1428{
1429 struct ali_ircc_cb *self;
1430 unsigned long flags;
1431 int iobase;
1432 __u32 speed;
1433 int mtt, diff;
1434
a97a6f10 1435 IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __func__ );
1da177e4 1436
4cf1653a 1437 self = netdev_priv(dev);
1da177e4
LT		 1438 iobase = self->io.fir_base;
1439
1440 netif_stop_queue(dev);
1441
1442 /* Make sure tests *& speed change are atomic */
1443 spin_lock_irqsave(&self->lock, flags);
1444
1445 /* Note : you should make sure that speed changes are not going
1446 * to corrupt any outgoing frame. Look at nsc-ircc for the gory
1447 * details - Jean II */
1448
1449 /* Check if we need to change the speed */
1450 speed = irda_get_next_speed(skb);
1451 if ((speed != self->io.speed) && (speed != -1)) {
1452 /* Check for empty frame */
1453 if (!skb->len) {
1454 ali_ircc_change_speed(self, speed);
1455 dev->trans_start = jiffies;
1456 spin_unlock_irqrestore(&self->lock, flags);
1457 dev_kfree_skb(skb);
1458 return 0;
1459 } else
1460 self->new_speed = speed;
1461 }
1462
1463 /* Register and copy this frame to DMA memory */
1464 self->tx_fifo.queue[self->tx_fifo.free].start = self->tx_fifo.tail;
1465 self->tx_fifo.queue[self->tx_fifo.free].len = skb->len;
1466 self->tx_fifo.tail += skb->len;
1467
af049081 1468 dev->stats.tx_bytes += skb->len;
1da177e4 1469
d626f62b
ACM		 1470 skb_copy_from_linear_data(skb, self->tx_fifo.queue[self->tx_fifo.free].start,
1471 skb->len);
1da177e4
LT		 1472 self->tx_fifo.len++;
1473 self->tx_fifo.free++;
1474
1475 /* Start transmit only if there is currently no transmit going on */
1476 if (self->tx_fifo.len == 1)
1477 {
1478 /* Check if we must wait the min turn time or not */
1479 mtt = irda_get_mtt(skb);
1480
1481 if (mtt)
1482 {
1483 /* Check how much time we have used already */
1484 do_gettimeofday(&self->now);
1485
1486 diff = self->now.tv_usec - self->stamp.tv_usec;
1487 /* self->stamp is set from ali_ircc_dma_receive_complete() */
1488
a97a6f10 1489 IRDA_DEBUG(1, "%s(), ******* diff = %d ******* \n", __func__ , diff);
1da177e4
LT		 1490
1491 if (diff < 0)
1492 diff += 1000000;
1493
1494 /* Check if the mtt is larger than the time we have
1495 * already used by all the protocol processing
1496 */
1497 if (mtt > diff)
1498 {
1499 mtt -= diff;
1500
1501 /*
1502 * Use timer if delay larger than 1000 us, and
1503 * use udelay for smaller values which should
1504 * be acceptable
1505 */
1506 if (mtt > 500)
1507 {
1508 /* Adjust for timer resolution */
1509 mtt = (mtt+250) / 500; /* 4 discard, 5 get advanced, Let's round off */
1510
a97a6f10 1511 IRDA_DEBUG(1, "%s(), ************** mtt = %d ***********\n", __func__ , mtt);
1da177e4
LT		 1512
1513 /* Setup timer */
1514 if (mtt == 1) /* 500 us */
1515 {
1516 switch_bank(iobase, BANK1);
1517 outb(TIMER_IIR_500, iobase+FIR_TIMER_IIR);
1518 }
1519 else if (mtt == 2) /* 1 ms */
1520 {
1521 switch_bank(iobase, BANK1);
1522 outb(TIMER_IIR_1ms, iobase+FIR_TIMER_IIR);
1523 }
1524 else /* > 2ms -> 4ms */
1525 {
1526 switch_bank(iobase, BANK1);
1527 outb(TIMER_IIR_2ms, iobase+FIR_TIMER_IIR);
1528 }
1529
1530
1531 /* Start timer */
1532 outb(inb(iobase+FIR_CR) | CR_TIMER_EN, iobase+FIR_CR);
1533 self->io.direction = IO_XMIT;
1534
1535 /* Enable timer interrupt */
1536 self->ier = IER_TIMER;
1537 SetCOMInterrupts(self, TRUE);
1538
1539 /* Timer will take care of the rest */
1540 goto out;
1541 }
1542 else
1543 udelay(mtt);
1544 } // if (if (mtt > diff)
1545 }// if (mtt)
1546
1547 /* Enable EOM interrupt */
1548 self->ier = IER_EOM;
1549 SetCOMInterrupts(self, TRUE);
1550
1551 /* Transmit frame */
1552 ali_ircc_dma_xmit(self);
1553 } // if (self->tx_fifo.len == 1)
1554
1555 out:
1556
1557 /* Not busy transmitting anymore if window is not full */
1558 if (self->tx_fifo.free < MAX_TX_WINDOW)
1559 netif_wake_queue(self->netdev);
1560
1561 /* Restore bank register */
1562 switch_bank(iobase, BANK0);
1563
1564 dev->trans_start = jiffies;
1565 spin_unlock_irqrestore(&self->lock, flags);
1566 dev_kfree_skb(skb);
1567
a97a6f10 1568 IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
1da177e4
LT		 1569 return 0;
1570}
1571
1572
1573static void ali_ircc_dma_xmit(struct ali_ircc_cb *self)
1574{
1575 int iobase, tmp;
1576 unsigned char FIFO_OPTI, Hi, Lo;
1577
1578
a97a6f10 1579 IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __func__ );
1da177e4
LT		 1580
1581 iobase = self->io.fir_base;
1582
1583 /* FIFO threshold , this method comes from NDIS5 code */
1584
1585 if(self->tx_fifo.queue[self->tx_fifo.ptr].len < TX_FIFO_Threshold)
1586 FIFO_OPTI = self->tx_fifo.queue[self->tx_fifo.ptr].len-1;
1587 else
1588 FIFO_OPTI = TX_FIFO_Threshold;
1589
1590 /* Disable DMA */
1591 switch_bank(iobase, BANK1);
1592 outb(inb(iobase+FIR_CR) & ~CR_DMA_EN, iobase+FIR_CR);
1593
1594 self->io.direction = IO_XMIT;
1595
1596 irda_setup_dma(self->io.dma,
1597 ((u8 *)self->tx_fifo.queue[self->tx_fifo.ptr].start -
1598 self->tx_buff.head) + self->tx_buff_dma,
1599 self->tx_fifo.queue[self->tx_fifo.ptr].len,
1600 DMA_TX_MODE);
1601
1602 /* Reset Tx FIFO */
1603 switch_bank(iobase, BANK0);
1604 outb(LCR_A_FIFO_RESET, iobase+FIR_LCR_A);
1605
1606 /* Set Tx FIFO threshold */
1607 if (self->fifo_opti_buf!=FIFO_OPTI)
1608 {
1609 switch_bank(iobase, BANK1);
1610 outb(FIFO_OPTI, iobase+FIR_FIFO_TR) ;
1611 self->fifo_opti_buf=FIFO_OPTI;
1612 }
1613
1614 /* Set Tx DMA threshold */
1615 switch_bank(iobase, BANK1);
1616 outb(TX_DMA_Threshold, iobase+FIR_DMA_TR);
1617
1618 /* Set max Tx frame size */
1619 Hi = (self->tx_fifo.queue[self->tx_fifo.ptr].len >> 8) & 0x0f;
1620 Lo = self->tx_fifo.queue[self->tx_fifo.ptr].len & 0xff;
1621 switch_bank(iobase, BANK2);
1622 outb(Hi, iobase+FIR_TX_DSR_HI);
1623 outb(Lo, iobase+FIR_TX_DSR_LO);
1624
1625 /* Disable SIP , Disable Brick Wall (we don't support in TX mode), Change to TX mode */
1626 switch_bank(iobase, BANK0);
1627 tmp = inb(iobase+FIR_LCR_B);
1628 tmp &= ~0x20; // Disable SIP
1629 outb(((unsigned char)(tmp & 0x3f) | LCR_B_TX_MODE) & ~LCR_B_BW, iobase+FIR_LCR_B);
a97a6f10 1630 IRDA_DEBUG(1, "%s(), ******* Change to TX mode: FIR_LCR_B = 0x%x ******* \n", __func__ , inb(iobase+FIR_LCR_B));
1da177e4
LT		 1631
1632 outb(0, iobase+FIR_LSR);
1633
1634 /* Enable DMA and Burst Mode */
1635 switch_bank(iobase, BANK1);
1636 outb(inb(iobase+FIR_CR) | CR_DMA_EN | CR_DMA_BURST, iobase+FIR_CR);
1637
1638 switch_bank(iobase, BANK0);
1639
a97a6f10 1640 IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
1da177e4
LT		 1641}
1642
1643static int ali_ircc_dma_xmit_complete(struct ali_ircc_cb *self)
1644{
1645 int iobase;
1646 int ret = TRUE;
1647
a97a6f10 1648 IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __func__ );
1da177e4
LT		 1649
1650 iobase = self->io.fir_base;
1651
1652 /* Disable DMA */
1653 switch_bank(iobase, BANK1);
1654 outb(inb(iobase+FIR_CR) & ~CR_DMA_EN, iobase+FIR_CR);
1655
1656 /* Check for underrun! */
1657 switch_bank(iobase, BANK0);
1658 if((inb(iobase+FIR_LSR) & LSR_FRAME_ABORT) == LSR_FRAME_ABORT)
1659
1660 {
a97a6f10 1661 IRDA_ERROR("%s(), ********* LSR_FRAME_ABORT *********\n", __func__);
af049081
SH		 1662 self->netdev->stats.tx_errors++;
1663 self->netdev->stats.tx_fifo_errors++;
1da177e4
LT		 1664 }
1665 else
1666 {
af049081 1667 self->netdev->stats.tx_packets++;
1da177e4
LT		 1668 }
1669
1670 /* Check if we need to change the speed */
1671 if (self->new_speed)
1672 {
1673 ali_ircc_change_speed(self, self->new_speed);
1674 self->new_speed = 0;
1675 }
1676
1677 /* Finished with this frame, so prepare for next */
1678 self->tx_fifo.ptr++;
1679 self->tx_fifo.len--;
1680
1681 /* Any frames to be sent back-to-back? */
1682 if (self->tx_fifo.len)
1683 {
1684 ali_ircc_dma_xmit(self);
1685
1686 /* Not finished yet! */
1687 ret = FALSE;
1688 }
1689 else
1690 { /* Reset Tx FIFO info */
1691 self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0;
1692 self->tx_fifo.tail = self->tx_buff.head;
1693 }
1694
1695 /* Make sure we have room for more frames */
1696 if (self->tx_fifo.free < MAX_TX_WINDOW) {
1697 /* Not busy transmitting anymore */
1698 /* Tell the network layer, that we can accept more frames */
1699 netif_wake_queue(self->netdev);
1700 }
1701
1702 switch_bank(iobase, BANK0);
1703
a97a6f10 1704 IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
1da177e4
LT		 1705 return ret;
1706}
1707
1708/*
1709 * Function ali_ircc_dma_receive (self)
1710 *
1711 * Get ready for receiving a frame. The device will initiate a DMA
1712 * if it starts to receive a frame.
1713 *
1714 */
1715static int ali_ircc_dma_receive(struct ali_ircc_cb *self)
1716{
1717 int iobase, tmp;
1718
a97a6f10 1719 IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __func__ );
1da177e4
LT		 1720
1721 iobase = self->io.fir_base;
1722
1723 /* Reset Tx FIFO info */
1724 self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0;
1725 self->tx_fifo.tail = self->tx_buff.head;
1726
1727 /* Disable DMA */
1728 switch_bank(iobase, BANK1);
1729 outb(inb(iobase+FIR_CR) & ~CR_DMA_EN, iobase+FIR_CR);
1730
1731 /* Reset Message Count */
1732 switch_bank(iobase, BANK0);
1733 outb(0x07, iobase+FIR_LSR);
1734
1735 self->rcvFramesOverflow = FALSE;
1736
1737 self->LineStatus = inb(iobase+FIR_LSR) ;
1738
1739 /* Reset Rx FIFO info */
1740 self->io.direction = IO_RECV;
1741 self->rx_buff.data = self->rx_buff.head;
1742
1743 /* Reset Rx FIFO */
1744 // switch_bank(iobase, BANK0);
1745 outb(LCR_A_FIFO_RESET, iobase+FIR_LCR_A);
1746
1747 self->st_fifo.len = self->st_fifo.pending_bytes = 0;
1748 self->st_fifo.tail = self->st_fifo.head = 0;
1749
1750 irda_setup_dma(self->io.dma, self->rx_buff_dma, self->rx_buff.truesize,
1751 DMA_RX_MODE);
1752
1753 /* Set Receive Mode,Brick Wall */
1754 //switch_bank(iobase, BANK0);
1755 tmp = inb(iobase+FIR_LCR_B);
1756 outb((unsigned char)(tmp &0x3f) | LCR_B_RX_MODE | LCR_B_BW , iobase + FIR_LCR_B); // 2000/12/1 05:16PM
a97a6f10 1757 IRDA_DEBUG(1, "%s(), *** Change To RX mode: FIR_LCR_B = 0x%x *** \n", __func__ , inb(iobase+FIR_LCR_B));
1da177e4
LT		 1758
1759 /* Set Rx Threshold */
1760 switch_bank(iobase, BANK1);
1761 outb(RX_FIFO_Threshold, iobase+FIR_FIFO_TR);
1762 outb(RX_DMA_Threshold, iobase+FIR_DMA_TR);
1763
1764 /* Enable DMA and Burst Mode */
1765 // switch_bank(iobase, BANK1);
1766 outb(CR_DMA_EN | CR_DMA_BURST, iobase+FIR_CR);
1767
1768 switch_bank(iobase, BANK0);
a97a6f10 1769 IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
1da177e4
LT		 1770 return 0;
1771}
1772
1773static int ali_ircc_dma_receive_complete(struct ali_ircc_cb *self)
1774{
1775 struct st_fifo *st_fifo;
1776 struct sk_buff *skb;
1777 __u8 status, MessageCount;
1778 int len, i, iobase, val;
1779
a97a6f10 1780 IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __func__ );
1da177e4
LT		 1781
1782 st_fifo = &self->st_fifo;
1783 iobase = self->io.fir_base;
1784
1785 switch_bank(iobase, BANK0);
1786 MessageCount = inb(iobase+ FIR_LSR)&0x07;
1787
1788 if (MessageCount > 0)
a97a6f10 1789 IRDA_DEBUG(0, "%s(), Messsage count = %d,\n", __func__ , MessageCount);
1da177e4
LT		 1790
1791 for (i=0; i<=MessageCount; i++)
1792 {
1793 /* Bank 0 */
1794 switch_bank(iobase, BANK0);
1795 status = inb(iobase+FIR_LSR);
1796
1797 switch_bank(iobase, BANK2);
1798 len = inb(iobase+FIR_RX_DSR_HI) & 0x0f;
1799 len = len << 8;
1800 len |= inb(iobase+FIR_RX_DSR_LO);
1801
a97a6f10
HH		 1802 IRDA_DEBUG(1, "%s(), RX Length = 0x%.2x,\n", __func__ , len);
1803 IRDA_DEBUG(1, "%s(), RX Status = 0x%.2x,\n", __func__ , status);
1da177e4
LT		 1804
1805 if (st_fifo->tail >= MAX_RX_WINDOW) {
a97a6f10 1806 IRDA_DEBUG(0, "%s(), window is full!\n", __func__ );
1da177e4
LT		 1807 continue;
1808 }
1809
1810 st_fifo->entries[st_fifo->tail].status = status;
1811 st_fifo->entries[st_fifo->tail].len = len;
1812 st_fifo->pending_bytes += len;
1813 st_fifo->tail++;
1814 st_fifo->len++;
1815 }
1816
1817 for (i=0; i<=MessageCount; i++)
1818 {
1819 /* Get first entry */
1820 status = st_fifo->entries[st_fifo->head].status;
1821 len = st_fifo->entries[st_fifo->head].len;
1822 st_fifo->pending_bytes -= len;
1823 st_fifo->head++;
1824 st_fifo->len--;
1825
1826 /* Check for errors */
1827 if ((status & 0xd8) || self->rcvFramesOverflow || (len==0))
1828 {
a97a6f10 1829 IRDA_DEBUG(0,"%s(), ************* RX Errors ************ \n", __func__ );
1da177e4
LT		 1830
1831 /* Skip frame */
af049081 1832 self->netdev->stats.rx_errors++;
1da177e4
LT		 1833
1834 self->rx_buff.data += len;
1835
1836 if (status & LSR_FIFO_UR)
1837 {
af049081 1838 self->netdev->stats.rx_frame_errors++;
a97a6f10 1839 IRDA_DEBUG(0,"%s(), ************* FIFO Errors ************ \n", __func__ );
1da177e4
LT		 1840 }
1841 if (status & LSR_FRAME_ERROR)
1842 {
af049081 1843 self->netdev->stats.rx_frame_errors++;
a97a6f10 1844 IRDA_DEBUG(0,"%s(), ************* FRAME Errors ************ \n", __func__ );
1da177e4
LT		 1845 }
1846
1847 if (status & LSR_CRC_ERROR)
1848 {
af049081 1849 self->netdev->stats.rx_crc_errors++;
a97a6f10 1850 IRDA_DEBUG(0,"%s(), ************* CRC Errors ************ \n", __func__ );
1da177e4
LT		 1851 }
1852
1853 if(self->rcvFramesOverflow)
1854 {
af049081 1855 self->netdev->stats.rx_frame_errors++;
a97a6f10 1856 IRDA_DEBUG(0,"%s(), ************* Overran DMA buffer ************ \n", __func__ );
1da177e4
LT		 1857 }
1858 if(len == 0)
1859 {
af049081 1860 self->netdev->stats.rx_frame_errors++;
a97a6f10 1861 IRDA_DEBUG(0,"%s(), ********** Receive Frame Size = 0 ********* \n", __func__ );
1da177e4
LT		 1862 }
1863 }
1864 else
1865 {
1866
1867 if (st_fifo->pending_bytes < 32)
1868 {
1869 switch_bank(iobase, BANK0);
1870 val = inb(iobase+FIR_BSR);
1871 if ((val& BSR_FIFO_NOT_EMPTY)== 0x80)
1872 {
a97a6f10 1873 IRDA_DEBUG(0, "%s(), ************* BSR_FIFO_NOT_EMPTY ************ \n", __func__ );
1da177e4
LT		 1874
1875 /* Put this entry back in fifo */
1876 st_fifo->head--;
1877 st_fifo->len++;
1878 st_fifo->pending_bytes += len;
1879 st_fifo->entries[st_fifo->head].status = status;
1880 st_fifo->entries[st_fifo->head].len = len;
1881
1882 /*
1883 * DMA not finished yet, so try again
1884 * later, set timer value, resolution
1885 * 500 us
1886 */
1887
1888 switch_bank(iobase, BANK1);
1889 outb(TIMER_IIR_500, iobase+FIR_TIMER_IIR); // 2001/1/2 05:07PM
1890
1891 /* Enable Timer */
1892 outb(inb(iobase+FIR_CR) | CR_TIMER_EN, iobase+FIR_CR);
1893
1894 return FALSE; /* I'll be back! */
1895 }
1896 }
1897
1898 /*
1899 * Remember the time we received this frame, so we can
1900 * reduce the min turn time a bit since we will know
1901 * how much time we have used for protocol processing
1902 */
1903 do_gettimeofday(&self->stamp);
1904
1905 skb = dev_alloc_skb(len+1);
1906 if (skb == NULL)
1907 {
1908 IRDA_WARNING("%s(), memory squeeze, "
1909 "dropping frame.\n",
a97a6f10 1910 __func__);
af049081 1911 self->netdev->stats.rx_dropped++;
1da177e4
LT		 1912
1913 return FALSE;
1914 }
1915
1916 /* Make sure IP header gets aligned */
1917 skb_reserve(skb, 1);
1918
1919 /* Copy frame without CRC, CRC is removed by hardware*/
1920 skb_put(skb, len);
27d7ff46 1921 skb_copy_to_linear_data(skb, self->rx_buff.data, len);
1da177e4
LT		 1922
1923 /* Move to next frame */
1924 self->rx_buff.data += len;
af049081
SH		 1925 self->netdev->stats.rx_bytes += len;
1926 self->netdev->stats.rx_packets++;
1da177e4
LT		 1927
1928 skb->dev = self->netdev;
459a98ed 1929 skb_reset_mac_header(skb);
1da177e4
LT		 1930 skb->protocol = htons(ETH_P_IRDA);
1931 netif_rx(skb);
1da177e4
LT		 1932 }
1933 }
1934
1935 switch_bank(iobase, BANK0);
1936
a97a6f10 1937 IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
1da177e4
LT		 1938 return TRUE;
1939}
1940
1941
1942
1943/*
1944 * Function ali_ircc_sir_hard_xmit (skb, dev)
1945 *
1946 * Transmit the frame!
1947 *
1948 */
1949static int ali_ircc_sir_hard_xmit(struct sk_buff *skb, struct net_device *dev)
1950{
1951 struct ali_ircc_cb *self;
1952 unsigned long flags;
1953 int iobase;
1954 __u32 speed;
1955
a97a6f10 1956 IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__ );
1da177e4
LT		 1957
1958 IRDA_ASSERT(dev != NULL, return 0;);
1959
4cf1653a 1960 self = netdev_priv(dev);
1da177e4
LT		 1961 IRDA_ASSERT(self != NULL, return 0;);
1962
1963 iobase = self->io.sir_base;
1964
1965 netif_stop_queue(dev);
1966
1967 /* Make sure tests *& speed change are atomic */
1968 spin_lock_irqsave(&self->lock, flags);
1969
1970 /* Note : you should make sure that speed changes are not going
1971 * to corrupt any outgoing frame. Look at nsc-ircc for the gory
1972 * details - Jean II */
1973
1974 /* Check if we need to change the speed */
1975 speed = irda_get_next_speed(skb);
1976 if ((speed != self->io.speed) && (speed != -1)) {
1977 /* Check for empty frame */
1978 if (!skb->len) {
1979 ali_ircc_change_speed(self, speed);
1980 dev->trans_start = jiffies;
1981 spin_unlock_irqrestore(&self->lock, flags);
1982 dev_kfree_skb(skb);
1983 return 0;
1984 } else
1985 self->new_speed = speed;
1986 }
1987
1988 /* Init tx buffer */
1989 self->tx_buff.data = self->tx_buff.head;
1990
1991 /* Copy skb to tx_buff while wrapping, stuffing and making CRC */
1992 self->tx_buff.len = async_wrap_skb(skb, self->tx_buff.data,
1993 self->tx_buff.truesize);
1994
af049081 1995 self->netdev->stats.tx_bytes += self->tx_buff.len;
1da177e4
LT		 1996
1997 /* Turn on transmit finished interrupt. Will fire immediately! */
1998 outb(UART_IER_THRI, iobase+UART_IER);
1999
2000 dev->trans_start = jiffies;
2001 spin_unlock_irqrestore(&self->lock, flags);
2002
2003 dev_kfree_skb(skb);
2004
a97a6f10 2005 IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
1da177e4
LT		 2006
2007 return 0;
2008}
2009
2010
2011/*
2012 * Function ali_ircc_net_ioctl (dev, rq, cmd)
2013 *
2014 * Process IOCTL commands for this device
2015 *
2016 */
2017static int ali_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
2018{
2019 struct if_irda_req *irq = (struct if_irda_req *) rq;
2020 struct ali_ircc_cb *self;
2021 unsigned long flags;
2022 int ret = 0;
2023
a97a6f10 2024 IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__ );
1da177e4
LT		 2025
2026 IRDA_ASSERT(dev != NULL, return -1;);
2027
4cf1653a 2028 self = netdev_priv(dev);
1da177e4
LT		 2029
2030 IRDA_ASSERT(self != NULL, return -1;);
2031
a97a6f10 2032 IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __func__ , dev->name, cmd);
1da177e4
LT		 2033
2034 switch (cmd) {
2035 case SIOCSBANDWIDTH: /* Set bandwidth */
a97a6f10 2036 IRDA_DEBUG(1, "%s(), SIOCSBANDWIDTH\n", __func__ );
1da177e4
LT		 2037 /*
2038 * This function will also be used by IrLAP to change the
2039 * speed, so we still must allow for speed change within
2040 * interrupt context.
2041 */
2042 if (!in_interrupt() && !capable(CAP_NET_ADMIN))
2043 return -EPERM;
2044
2045 spin_lock_irqsave(&self->lock, flags);
2046 ali_ircc_change_speed(self, irq->ifr_baudrate);
2047 spin_unlock_irqrestore(&self->lock, flags);
2048 break;
2049 case SIOCSMEDIABUSY: /* Set media busy */
a97a6f10 2050 IRDA_DEBUG(1, "%s(), SIOCSMEDIABUSY\n", __func__ );
1da177e4
LT		 2051 if (!capable(CAP_NET_ADMIN))
2052 return -EPERM;
2053 irda_device_set_media_busy(self->netdev, TRUE);
2054 break;
2055 case SIOCGRECEIVING: /* Check if we are receiving right now */
a97a6f10 2056 IRDA_DEBUG(2, "%s(), SIOCGRECEIVING\n", __func__ );
1da177e4
LT		 2057 /* This is protected */
2058 irq->ifr_receiving = ali_ircc_is_receiving(self);
2059 break;
2060 default:
2061 ret = -EOPNOTSUPP;
2062 }
2063
a97a6f10 2064 IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
1da177e4
LT		 2065
2066 return ret;
2067}
2068
2069/*
2070 * Function ali_ircc_is_receiving (self)
2071 *
2072 * Return TRUE is we are currently receiving a frame
2073 *
2074 */
2075static int ali_ircc_is_receiving(struct ali_ircc_cb *self)
2076{
2077 unsigned long flags;
2078 int status = FALSE;
2079 int iobase;
2080
a97a6f10 2081 IRDA_DEBUG(2, "%s(), ---------------- Start -----------------\n", __func__ );
1da177e4
LT		 2082
2083 IRDA_ASSERT(self != NULL, return FALSE;);
2084
2085 spin_lock_irqsave(&self->lock, flags);
2086
2087 if (self->io.speed > 115200)
2088 {
2089 iobase = self->io.fir_base;
2090
2091 switch_bank(iobase, BANK1);
2092 if((inb(iobase+FIR_FIFO_FR) & 0x3f) != 0)
2093 {
2094 /* We are receiving something */
a97a6f10 2095 IRDA_DEBUG(1, "%s(), We are receiving something\n", __func__ );
1da177e4
LT		 2096 status = TRUE;
2097 }
2098 switch_bank(iobase, BANK0);
2099 }
2100 else
2101 {
2102 status = (self->rx_buff.state != OUTSIDE_FRAME);
2103 }
2104
2105 spin_unlock_irqrestore(&self->lock, flags);
2106
a97a6f10 2107 IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
1da177e4
LT		 2108
2109 return status;
2110}
2111
898b1d16 2112static int ali_ircc_suspend(struct platform_device *dev, pm_message_t state)
1da177e4 2113{
898b1d16 2114 struct ali_ircc_cb *self = platform_get_drvdata(dev);
1da177e4 2115
898b1d16 2116 IRDA_MESSAGE("%s, Suspending\n", ALI_IRCC_DRIVER_NAME);
1da177e4
LT		 2117
2118 if (self->io.suspended)
898b1d16 2119 return 0;
1da177e4
LT		 2120
2121 ali_ircc_net_close(self->netdev);
2122
2123 self->io.suspended = 1;
2124
898b1d16 2125 return 0;
1da177e4
LT		 2126}
2127
898b1d16 2128static int ali_ircc_resume(struct platform_device *dev)
1da177e4 2129{
898b1d16 2130 struct ali_ircc_cb *self = platform_get_drvdata(dev);
1da177e4
LT		 2131
2132 if (!self->io.suspended)
898b1d16 2133 return 0;
1da177e4
LT		 2134
2135 ali_ircc_net_open(self->netdev);
2136
898b1d16 2137 IRDA_MESSAGE("%s, Waking up\n", ALI_IRCC_DRIVER_NAME);
1da177e4
LT		 2138
2139 self->io.suspended = 0;
1da177e4 2140
1da177e4
LT		 2141 return 0;
2142}
2143
1da177e4
LT		 2144/* ALi Chip Function */
2145
2146static void SetCOMInterrupts(struct ali_ircc_cb *self , unsigned char enable)
2147{
2148
2149 unsigned char newMask;
2150
2151 int iobase = self->io.fir_base; /* or sir_base */
2152
a97a6f10 2153 IRDA_DEBUG(2, "%s(), -------- Start -------- ( Enable = %d )\n", __func__ , enable);
1da177e4
LT		 2154
2155 /* Enable the interrupt which we wish to */
2156 if (enable){
2157 if (self->io.direction == IO_XMIT)
2158 {
2159 if (self->io.speed > 115200) /* FIR, MIR */
2160 {
2161 newMask = self->ier;
2162 }
2163 else /* SIR */
2164 {
2165 newMask = UART_IER_THRI | UART_IER_RDI;
2166 }
2167 }
2168 else {
2169 if (self->io.speed > 115200) /* FIR, MIR */
2170 {
2171 newMask = self->ier;
2172 }
2173 else /* SIR */
2174 {
2175 newMask = UART_IER_RDI;
2176 }
2177 }
2178 }
2179 else /* Disable all the interrupts */
2180 {
2181 newMask = 0x00;
2182
2183 }
2184
2185 //SIR and FIR has different registers
2186 if (self->io.speed > 115200)
2187 {
2188 switch_bank(iobase, BANK0);
2189 outb(newMask, iobase+FIR_IER);
2190 }
2191 else
2192 outb(newMask, iobase+UART_IER);
2193
a97a6f10 2194 IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
1da177e4
LT		 2195}
2196
2197static void SIR2FIR(int iobase)
2198{
2199 //unsigned char tmp;
2200
a97a6f10 2201 IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__ );
1da177e4
LT		 2202
2203 /* Already protected (change_speed() or setup()), no need to lock.
2204 * Jean II */
2205
2206 outb(0x28, iobase+UART_MCR);
2207 outb(0x68, iobase+UART_MCR);
2208 outb(0x88, iobase+UART_MCR);
2209
2210 outb(0x60, iobase+FIR_MCR); /* Master Reset */
2211 outb(0x20, iobase+FIR_MCR); /* Master Interrupt Enable */
2212
2213 //tmp = inb(iobase+FIR_LCR_B); /* SIP enable */
2214 //tmp |= 0x20;
2215 //outb(tmp, iobase+FIR_LCR_B);
2216
a97a6f10 2217 IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
1da177e4
LT		 2218}
2219
2220static void FIR2SIR(int iobase)
2221{
2222 unsigned char val;
2223
a97a6f10 2224 IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__ );
1da177e4
LT		 2225
2226 /* Already protected (change_speed() or setup()), no need to lock.
2227 * Jean II */
2228
2229 outb(0x20, iobase+FIR_MCR); /* IRQ to low */
2230 outb(0x00, iobase+UART_IER);
2231
2232 outb(0xA0, iobase+FIR_MCR); /* Don't set master reset */
2233 outb(0x00, iobase+UART_FCR);
2234 outb(0x07, iobase+UART_FCR);
2235
2236 val = inb(iobase+UART_RX);
2237 val = inb(iobase+UART_LSR);
2238 val = inb(iobase+UART_MSR);
2239
a97a6f10 2240 IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
1da177e4
LT		 2241}
2242
2243MODULE_AUTHOR("Benjamin Kong <benjamin_kong@ali.com.tw>");
2244MODULE_DESCRIPTION("ALi FIR Controller Driver");
2245MODULE_LICENSE("GPL");
72abb461 2246MODULE_ALIAS("platform:" ALI_IRCC_DRIVER_NAME);
1da177e4
LT		 2247
2248
2249module_param_array(io, int, NULL, 0);
2250MODULE_PARM_DESC(io, "Base I/O addresses");
2251module_param_array(irq, int, NULL, 0);
2252MODULE_PARM_DESC(irq, "IRQ lines");
2253module_param_array(dma, int, NULL, 0);
2254MODULE_PARM_DESC(dma, "DMA channels");
2255
2256module_init(ali_ircc_init);
2257module_exit(ali_ircc_cleanup);
Linux kernel - Deliverables
This page took 0.705737 seconds and 5 git commands to generate.