[deliverable/linux.git] / drivers / net / mdio.c

/*
 * mdio.c: Generic support for MDIO-compatible transceivers
 * Copyright 2006-2009 Solarflare Communications Inc.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License version 2 as published
 * by the Free Software Foundation, incorporated herein by reference.
 */

#include <linux/kernel.h>
#include <linux/capability.h>
#include <linux/errno.h>
#include <linux/ethtool.h>
#include <linux/mdio.h>
#include <linux/module.h>

MODULE_DESCRIPTION("Generic support for MDIO-compatible transceivers");
MODULE_AUTHOR("Copyright 2006-2009 Solarflare Communications Inc.");
MODULE_LICENSE("GPL");

/**
 * mdio45_probe - probe for an MDIO (clause 45) device
 * @mdio: MDIO interface
 * @prtad: Expected PHY address
 *
 * This sets @prtad and @mmds in the MDIO interface if successful.
 * Returns 0 on success, negative on error.
 */
int mdio45_probe(struct mdio_if_info *mdio, int prtad)
{
	int mmd, stat2, devs1, devs2;

	/* Assume PHY must have at least one of PMA/PMD, WIS, PCS, PHY
	 * XS or DTE XS; give up if none is present. */
	for (mmd = 1; mmd <= 5; mmd++) {
		/* Is this MMD present? */
		stat2 = mdio->mdio_read(mdio->dev, prtad, mmd, MDIO_STAT2);
		if (stat2 < 0 ||
		    (stat2 & MDIO_STAT2_DEVPRST) != MDIO_STAT2_DEVPRST_VAL)
			continue;

		/* It should tell us about all the other MMDs */
		devs1 = mdio->mdio_read(mdio->dev, prtad, mmd, MDIO_DEVS1);
		devs2 = mdio->mdio_read(mdio->dev, prtad, mmd, MDIO_DEVS2);
		if (devs1 < 0 || devs2 < 0)
			continue;

		mdio->prtad = prtad;
		mdio->mmds = devs1 | (devs2 << 16);
		return 0;
	}

	return -ENODEV;
}
EXPORT_SYMBOL(mdio45_probe);

/**
 * mdio_set_flag - set or clear flag in an MDIO register
 * @mdio: MDIO interface
 * @prtad: PHY address
 * @devad: MMD address
 * @addr: Register address
 * @mask: Mask for flag (single bit set)
 * @sense: New value of flag
 *
 * This debounces changes: it does not write the register if the flag
 * already has the proper value.  Returns 0 on success, negative on error.
 */
int mdio_set_flag(const struct mdio_if_info *mdio,
		  int prtad, int devad, u16 addr, int mask,
		  bool sense)
{
	int old_val = mdio->mdio_read(mdio->dev, prtad, devad, addr);
	int new_val;

	if (old_val < 0)
		return old_val;
	if (sense)
		new_val = old_val | mask;
	else
		new_val = old_val & ~mask;
	if (old_val == new_val)
		return 0;
	return mdio->mdio_write(mdio->dev, prtad, devad, addr, new_val);
}
EXPORT_SYMBOL(mdio_set_flag);

/**
 * mdio_link_ok - is link status up/OK
 * @mdio: MDIO interface
 * @mmd_mask: Mask for MMDs to check
 *
 * Returns 1 if the PHY reports link status up/OK, 0 otherwise.
 * @mmd_mask is normally @mdio->mmds, but if loopback is enabled
 * the MMDs being bypassed should be excluded from the mask.
 */
int mdio45_links_ok(const struct mdio_if_info *mdio, u32 mmd_mask)
{
	int devad, reg;

	if (!mmd_mask) {
		/* Use absence of XGMII faults in lieu of link state */
		reg = mdio->mdio_read(mdio->dev, mdio->prtad,
				      MDIO_MMD_PHYXS, MDIO_STAT2);
		return reg >= 0 && !(reg & MDIO_STAT2_RXFAULT);
	}

	for (devad = 0; mmd_mask; devad++) {
		if (mmd_mask & (1 << devad)) {
			mmd_mask &= ~(1 << devad);

			/* Reset the latched status and fault flags */
			mdio->mdio_read(mdio->dev, mdio->prtad,
					devad, MDIO_STAT1);
			if (devad == MDIO_MMD_PMAPMD || devad == MDIO_MMD_PCS ||
			    devad == MDIO_MMD_PHYXS || devad == MDIO_MMD_DTEXS)
				mdio->mdio_read(mdio->dev, mdio->prtad,
						devad, MDIO_STAT2);

			/* Check the current status and fault flags */
			reg = mdio->mdio_read(mdio->dev, mdio->prtad,
					      devad, MDIO_STAT1);
			if (reg < 0 ||
			    (reg & (MDIO_STAT1_FAULT | MDIO_STAT1_LSTATUS)) !=
			    MDIO_STAT1_LSTATUS)
				return false;
		}
	}

	return true;
}
EXPORT_SYMBOL(mdio45_links_ok);

/**
 * mdio45_nway_restart - restart auto-negotiation for this interface
 * @mdio: MDIO interface
 *
 * Returns 0 on success, negative on error.
 */
int mdio45_nway_restart(const struct mdio_if_info *mdio)
{
	if (!(mdio->mmds & MDIO_DEVS_AN))
		return -EOPNOTSUPP;

	mdio_set_flag(mdio, mdio->prtad, MDIO_MMD_AN, MDIO_CTRL1,
		      MDIO_AN_CTRL1_RESTART, true);
	return 0;
}
EXPORT_SYMBOL(mdio45_nway_restart);

static u32 mdio45_get_an(const struct mdio_if_info *mdio, u16 addr)
{
	u32 result = 0;
	int reg;

	reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_AN, addr);
	if (reg & ADVERTISE_10HALF)
		result |= ADVERTISED_10baseT_Half;
	if (reg & ADVERTISE_10FULL)
		result |= ADVERTISED_10baseT_Full;
	if (reg & ADVERTISE_100HALF)
		result |= ADVERTISED_100baseT_Half;
	if (reg & ADVERTISE_100FULL)
		result |= ADVERTISED_100baseT_Full;
	return result;
}

/**
 * mdio45_ethtool_gset_npage - get settings for ETHTOOL_GSET
 * @mdio: MDIO interface
 * @ecmd: Ethtool request structure
 * @npage_adv: Modes currently advertised on next pages
 * @npage_lpa: Modes advertised by link partner on next pages
 *
 * Since the CSRs for auto-negotiation using next pages are not fully
 * standardised, this function does not attempt to decode them.  The
 * caller must pass them in.
 */
void mdio45_ethtool_gset_npage(const struct mdio_if_info *mdio,
			       struct ethtool_cmd *ecmd,
			       u32 npage_adv, u32 npage_lpa)
{
	int reg;

	ecmd->transceiver = XCVR_INTERNAL;
	ecmd->phy_address = mdio->prtad;
	ecmd->mdio_support =
		mdio->mode_support & (MDIO_SUPPORTS_C45 | MDIO_SUPPORTS_C22);

	reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD,
			      MDIO_CTRL2);
	switch (reg & MDIO_PMA_CTRL2_TYPE) {
	case MDIO_PMA_CTRL2_10GBT:
	case MDIO_PMA_CTRL2_1000BT:
	case MDIO_PMA_CTRL2_100BTX:
	case MDIO_PMA_CTRL2_10BT:
		ecmd->port = PORT_TP;
		ecmd->supported = SUPPORTED_TP;
		reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD,
				      MDIO_SPEED);
		if (reg & MDIO_SPEED_10G)
			ecmd->supported |= SUPPORTED_10000baseT_Full;
		if (reg & MDIO_PMA_SPEED_1000)
			ecmd->supported |= (SUPPORTED_1000baseT_Full |
					    SUPPORTED_1000baseT_Half);
		if (reg & MDIO_PMA_SPEED_100)
			ecmd->supported |= (SUPPORTED_100baseT_Full |
					    SUPPORTED_100baseT_Half);
		if (reg & MDIO_PMA_SPEED_10)
			ecmd->supported |= (SUPPORTED_10baseT_Full |
					    SUPPORTED_10baseT_Half);
		ecmd->advertising = ADVERTISED_TP;
		break;

	case MDIO_PMA_CTRL2_10GBCX4:
		ecmd->port = PORT_OTHER;
		ecmd->supported = 0;
		ecmd->advertising = 0;
		break;

	case MDIO_PMA_CTRL2_10GBKX4:
	case MDIO_PMA_CTRL2_10GBKR:
	case MDIO_PMA_CTRL2_1000BKX:
		ecmd->port = PORT_OTHER;
		ecmd->supported = SUPPORTED_Backplane;
		reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD,
				      MDIO_PMA_EXTABLE);
		if (reg & MDIO_PMA_EXTABLE_10GBKX4)
			ecmd->supported |= SUPPORTED_10000baseKX4_Full;
		if (reg & MDIO_PMA_EXTABLE_10GBKR)
			ecmd->supported |= SUPPORTED_10000baseKR_Full;
		if (reg & MDIO_PMA_EXTABLE_1000BKX)
			ecmd->supported |= SUPPORTED_1000baseKX_Full;
		reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD,
				      MDIO_PMA_10GBR_FECABLE);
		if (reg & MDIO_PMA_10GBR_FECABLE_ABLE)
			ecmd->supported |= SUPPORTED_10000baseR_FEC;
		ecmd->advertising = ADVERTISED_Backplane;
		break;

	/* All the other defined modes are flavours of optical */
	default:
		ecmd->port = PORT_FIBRE;
		ecmd->supported = SUPPORTED_FIBRE;
		ecmd->advertising = ADVERTISED_FIBRE;
		break;
	}

	if (mdio->mmds & MDIO_DEVS_AN) {
		ecmd->supported |= SUPPORTED_Autoneg;
		reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_AN,
				      MDIO_CTRL1);
		if (reg & MDIO_AN_CTRL1_ENABLE) {
			ecmd->autoneg = AUTONEG_ENABLE;
			ecmd->advertising |=
				ADVERTISED_Autoneg |
				mdio45_get_an(mdio, MDIO_AN_ADVERTISE) |
				npage_adv;
		} else {
			ecmd->autoneg = AUTONEG_DISABLE;
		}
	} else {
		ecmd->autoneg = AUTONEG_DISABLE;
	}

	if (ecmd->autoneg) {
		u32 modes = 0;
		int an_stat = mdio->mdio_read(mdio->dev, mdio->prtad,
					      MDIO_MMD_AN, MDIO_STAT1);

		/* If AN is complete and successful, report best common
		 * mode, otherwise report best advertised mode. */
		if (an_stat & MDIO_AN_STAT1_COMPLETE) {
			ecmd->lp_advertising =
				mdio45_get_an(mdio, MDIO_AN_LPA) | npage_lpa;
			if (an_stat & MDIO_AN_STAT1_LPABLE)
				ecmd->lp_advertising |= ADVERTISED_Autoneg;
			modes = ecmd->advertising & ecmd->lp_advertising;
		}
		if ((modes & ~ADVERTISED_Autoneg) == 0)
			modes = ecmd->advertising;

		if (modes & (ADVERTISED_10000baseT_Full |
			     ADVERTISED_10000baseKX4_Full |
			     ADVERTISED_10000baseKR_Full)) {
			ecmd->speed = SPEED_10000;
			ecmd->duplex = DUPLEX_FULL;
		} else if (modes & (ADVERTISED_1000baseT_Full |
				    ADVERTISED_1000baseT_Half |
				    ADVERTISED_1000baseKX_Full)) {
			ecmd->speed = SPEED_1000;
			ecmd->duplex = !(modes & ADVERTISED_1000baseT_Half);
		} else if (modes & (ADVERTISED_100baseT_Full |
				    ADVERTISED_100baseT_Half)) {
			ecmd->speed = SPEED_100;
			ecmd->duplex = !!(modes & ADVERTISED_100baseT_Full);
		} else {
			ecmd->speed = SPEED_10;
			ecmd->duplex = !!(modes & ADVERTISED_10baseT_Full);
		}
	} else {
		/* Report forced settings */
		reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD,
				      MDIO_CTRL1);
		ecmd->speed = (((reg & MDIO_PMA_CTRL1_SPEED1000) ? 100 : 1) *
			       ((reg & MDIO_PMA_CTRL1_SPEED100) ? 100 : 10));
		ecmd->duplex = (reg & MDIO_CTRL1_FULLDPLX ||
				ecmd->speed == SPEED_10000);
	}

	/* 10GBASE-T MDI/MDI-X */
	if (ecmd->port == PORT_TP && ecmd->speed == SPEED_10000) {
		switch (mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD,
					MDIO_PMA_10GBT_SWAPPOL)) {
		case MDIO_PMA_10GBT_SWAPPOL_ABNX | MDIO_PMA_10GBT_SWAPPOL_CDNX:
			ecmd->eth_tp_mdix = ETH_TP_MDI;
			break;
		case 0:
			ecmd->eth_tp_mdix = ETH_TP_MDI_X;
			break;
		default:
			/* It's complicated... */
			ecmd->eth_tp_mdix = ETH_TP_MDI_INVALID;
			break;
		}
	}
}
EXPORT_SYMBOL(mdio45_ethtool_gset_npage);

/**
 * mdio45_ethtool_spauseparam_an - set auto-negotiated pause parameters
 * @mdio: MDIO interface
 * @ecmd: Ethtool request structure
 *
 * This function assumes that the PHY has an auto-negotiation MMD.  It
 * will enable and disable advertising of flow control as appropriate.
 */
void mdio45_ethtool_spauseparam_an(const struct mdio_if_info *mdio,
				   const struct ethtool_pauseparam *ecmd)
{
	int adv, old_adv;

	WARN_ON(!(mdio->mmds & MDIO_DEVS_AN));

	old_adv = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_AN,
				  MDIO_AN_ADVERTISE);
	adv = ((old_adv & ~(ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM)) |
	       mii_advertise_flowctrl((ecmd->rx_pause ? FLOW_CTRL_RX : 0) |
				      (ecmd->tx_pause ? FLOW_CTRL_TX : 0)));
	if (adv != old_adv) {
		mdio->mdio_write(mdio->dev, mdio->prtad, MDIO_MMD_AN,
				 MDIO_AN_ADVERTISE, adv);
		mdio45_nway_restart(mdio);
	}
}
EXPORT_SYMBOL(mdio45_ethtool_spauseparam_an);

/**
 * mdio_mii_ioctl - MII ioctl interface for MDIO (clause 22 or 45) PHYs
 * @mdio: MDIO interface
 * @mii_data: MII ioctl data structure
 * @cmd: MII ioctl command
 *
 * Returns 0 on success, negative on error.
 */
int mdio_mii_ioctl(const struct mdio_if_info *mdio,
		   struct mii_ioctl_data *mii_data, int cmd)
{
	int prtad, devad;
	u16 addr = mii_data->reg_num;

	/* Validate/convert cmd to one of SIOC{G,S}MIIREG */
	switch (cmd) {
	case SIOCGMIIPHY:
		if (mdio->prtad == MDIO_PRTAD_NONE)
			return -EOPNOTSUPP;
		mii_data->phy_id = mdio->prtad;
		cmd = SIOCGMIIREG;
		break;
	case SIOCGMIIREG:
	case SIOCSMIIREG:
		break;
	default:
		return -EOPNOTSUPP;
	}

	/* Validate/convert phy_id */
	if ((mdio->mode_support & MDIO_SUPPORTS_C45) &&
	    mdio_phy_id_is_c45(mii_data->phy_id)) {
		prtad = mdio_phy_id_prtad(mii_data->phy_id);
		devad = mdio_phy_id_devad(mii_data->phy_id);
	} else if ((mdio->mode_support & MDIO_SUPPORTS_C22) &&
		   mii_data->phy_id < 0x20) {
		prtad = mii_data->phy_id;
		devad = MDIO_DEVAD_NONE;
		addr &= 0x1f;
	} else if ((mdio->mode_support & MDIO_EMULATE_C22) &&
		   mdio->prtad != MDIO_PRTAD_NONE &&
		   mii_data->phy_id == mdio->prtad) {
		/* Remap commonly-used MII registers. */
		prtad = mdio->prtad;
		switch (addr) {
		case MII_BMCR:
		case MII_BMSR:
		case MII_PHYSID1:
		case MII_PHYSID2:
			devad = __ffs(mdio->mmds);
			break;
		case MII_ADVERTISE:
		case MII_LPA:
			if (!(mdio->mmds & MDIO_DEVS_AN))
				return -EINVAL;
			devad = MDIO_MMD_AN;
			if (addr == MII_ADVERTISE)
				addr = MDIO_AN_ADVERTISE;
			else
				addr = MDIO_AN_LPA;
			break;
		default:
			return -EINVAL;
		}
	} else {
		return -EINVAL;
	}

	if (cmd == SIOCGMIIREG) {
		int rc = mdio->mdio_read(mdio->dev, prtad, devad, addr);
		if (rc < 0)
			return rc;
		mii_data->val_out = rc;
		return 0;
	} else {
		return mdio->mdio_write(mdio->dev, prtad, devad, addr,
					mii_data->val_in);
	}
}
EXPORT_SYMBOL(mdio_mii_ioctl);
Commit	Line	Data
1b1c2e95 BH	1	/*
	2	* mdio.c: Generic support for MDIO-compatible transceivers
	3	* Copyright 2006-2009 Solarflare Communications Inc.
	4	*
	5	* This program is free software; you can redistribute it and/or modify it
	6	* under the terms of the GNU General Public License version 2 as published
	7	* by the Free Software Foundation, incorporated herein by reference.
	8	*/
	9
	10	#include <linux/kernel.h>
	11	#include <linux/capability.h>
	12	#include <linux/errno.h>
	13	#include <linux/ethtool.h>
	14	#include <linux/mdio.h>
	15	#include <linux/module.h>
	16
30767636 NR	17	MODULE_DESCRIPTION("Generic support for MDIO-compatible transceivers");
	18	MODULE_AUTHOR("Copyright 2006-2009 Solarflare Communications Inc.");
	19	MODULE_LICENSE("GPL");
	20
1b1c2e95 BH	21	/**
	22	* mdio45_probe - probe for an MDIO (clause 45) device
	23	* @mdio: MDIO interface
	24	* @prtad: Expected PHY address
	25	*
	26	* This sets @prtad and @mmds in the MDIO interface if successful.
	27	* Returns 0 on success, negative on error.
	28	*/
	29	int mdio45_probe(struct mdio_if_info *mdio, int prtad)
	30	{
	31	int mmd, stat2, devs1, devs2;
	32
	33	/* Assume PHY must have at least one of PMA/PMD, WIS, PCS, PHY
	34	* XS or DTE XS; give up if none is present. */
	35	for (mmd = 1; mmd <= 5; mmd++) {
	36	/* Is this MMD present? */
	37	stat2 = mdio->mdio_read(mdio->dev, prtad, mmd, MDIO_STAT2);
	38	if (stat2 < 0 \|\|
	39	(stat2 & MDIO_STAT2_DEVPRST) != MDIO_STAT2_DEVPRST_VAL)
	40	continue;
	41
	42	/* It should tell us about all the other MMDs */
	43	devs1 = mdio->mdio_read(mdio->dev, prtad, mmd, MDIO_DEVS1);
	44	devs2 = mdio->mdio_read(mdio->dev, prtad, mmd, MDIO_DEVS2);
	45	if (devs1 < 0 \|\| devs2 < 0)
	46	continue;
	47
	48	mdio->prtad = prtad;
	49	mdio->mmds = devs1 \| (devs2 << 16);
	50	return 0;
	51	}
	52
	53	return -ENODEV;
	54	}
	55	EXPORT_SYMBOL(mdio45_probe);
	56
	57	/**
	58	* mdio_set_flag - set or clear flag in an MDIO register
	59	* @mdio: MDIO interface
	60	* @prtad: PHY address
	61	* @devad: MMD address
	62	* @addr: Register address
	63	* @mask: Mask for flag (single bit set)
	64	* @sense: New value of flag
	65	*
	66	* This debounces changes: it does not write the register if the flag
	67	* already has the proper value. Returns 0 on success, negative on error.
	68	*/
	69	int mdio_set_flag(const struct mdio_if_info *mdio,
	70	int prtad, int devad, u16 addr, int mask,
	71	bool sense)
	72	{
	73	int old_val = mdio->mdio_read(mdio->dev, prtad, devad, addr);
	74	int new_val;
	75
	76	if (old_val < 0)
	77	return old_val;
	78	if (sense)
	79	new_val = old_val \| mask;
	80	else
	81	new_val = old_val & ~mask;
	82	if (old_val == new_val)
	83	return 0;
	84	return mdio->mdio_write(mdio->dev, prtad, devad, addr, new_val);
85	}
86	EXPORT_SYMBOL(mdio_set_flag);
87
88	/**
89	* mdio_link_ok - is link status up/OK
90	* @mdio: MDIO interface
91	* @mmd_mask: Mask for MMDs to check
92	*
93	* Returns 1 if the PHY reports link status up/OK, 0 otherwise.
94	* @mmd_mask is normally @mdio->mmds, but if loopback is enabled
95	* the MMDs being bypassed should be excluded from the mask.
96	*/
97	int mdio45_links_ok(const struct mdio_if_info *mdio, u32 mmd_mask)
98	{
99	int devad, reg;
100
101	if (!mmd_mask) {
102	/* Use absence of XGMII faults in lieu of link state */
103	reg = mdio->mdio_read(mdio->dev, mdio->prtad,
104	MDIO_MMD_PHYXS, MDIO_STAT2);
105	return reg >= 0 && !(reg & MDIO_STAT2_RXFAULT);
106	}
107
108	for (devad = 0; mmd_mask; devad++) {
109	if (mmd_mask & (1 << devad)) {
110	mmd_mask &= ~(1 << devad);
111
771046d7	112	/* Reset the latched status and fault flags */
1b1c2e95 BH	113	mdio->mdio_read(mdio->dev, mdio->prtad,
1b1c2e95 BH	114	devad, MDIO_STAT1);
771046d7 BH	115	if (devad == MDIO_MMD_PMAPMD \|\| devad == MDIO_MMD_PCS \|\|
	116	devad == MDIO_MMD_PHYXS \|\| devad == MDIO_MMD_DTEXS)
	117	mdio->mdio_read(mdio->dev, mdio->prtad,
	118	devad, MDIO_STAT2);
	119
	120	/* Check the current status and fault flags */
1b1c2e95 BH	121	reg = mdio->mdio_read(mdio->dev, mdio->prtad,
1b1c2e95 BH	122	devad, MDIO_STAT1);
771046d7 BH	123	if (reg < 0 \|\|
	124	(reg & (MDIO_STAT1_FAULT \| MDIO_STAT1_LSTATUS)) !=
	125	MDIO_STAT1_LSTATUS)
1b1c2e95 BH	126	return false;
	127	}
	128	}
	129
	130	return true;
	131	}
	132	EXPORT_SYMBOL(mdio45_links_ok);
	133
	134	/**
	135	* mdio45_nway_restart - restart auto-negotiation for this interface
	136	* @mdio: MDIO interface
	137	*
	138	* Returns 0 on success, negative on error.
	139	*/
	140	int mdio45_nway_restart(const struct mdio_if_info *mdio)
	141	{
	142	if (!(mdio->mmds & MDIO_DEVS_AN))
	143	return -EOPNOTSUPP;
	144
	145	mdio_set_flag(mdio, mdio->prtad, MDIO_MMD_AN, MDIO_CTRL1,
	146	MDIO_AN_CTRL1_RESTART, true);
	147	return 0;
	148	}
	149	EXPORT_SYMBOL(mdio45_nway_restart);
	150
	151	static u32 mdio45_get_an(const struct mdio_if_info *mdio, u16 addr)
	152	{
	153	u32 result = 0;
	154	int reg;
	155
	156	reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_AN, addr);
	157	if (reg & ADVERTISE_10HALF)
	158	result \|= ADVERTISED_10baseT_Half;
	159	if (reg & ADVERTISE_10FULL)
	160	result \|= ADVERTISED_10baseT_Full;
	161	if (reg & ADVERTISE_100HALF)
	162	result \|= ADVERTISED_100baseT_Half;
	163	if (reg & ADVERTISE_100FULL)
	164	result \|= ADVERTISED_100baseT_Full;
	165	return result;
	166	}
	167
	168	/**
	169	* mdio45_ethtool_gset_npage - get settings for ETHTOOL_GSET
	170	* @mdio: MDIO interface
	171	* @ecmd: Ethtool request structure
	172	* @npage_adv: Modes currently advertised on next pages
	173	* @npage_lpa: Modes advertised by link partner on next pages
	174	*
	175	* Since the CSRs for auto-negotiation using next pages are not fully
	176	* standardised, this function does not attempt to decode them. The
	177	* caller must pass them in.
	178	*/
	179	void mdio45_ethtool_gset_npage(const struct mdio_if_info *mdio,
	180	struct ethtool_cmd *ecmd,
	181	u32 npage_adv, u32 npage_lpa)
	182	{
	183	int reg;
	184
	185	ecmd->transceiver = XCVR_INTERNAL;
	186	ecmd->phy_address = mdio->prtad;
0c09c1a4 BH	187	ecmd->mdio_support =
0c09c1a4 BH	188	mdio->mode_support & (MDIO_SUPPORTS_C45 \| MDIO_SUPPORTS_C22);
1b1c2e95 BH	189
	190	reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD,
	191	MDIO_CTRL2);
	192	switch (reg & MDIO_PMA_CTRL2_TYPE) {
	193	case MDIO_PMA_CTRL2_10GBT:
	194	case MDIO_PMA_CTRL2_1000BT:
	195	case MDIO_PMA_CTRL2_100BTX:
	196	case MDIO_PMA_CTRL2_10BT:
	197	ecmd->port = PORT_TP;
	198	ecmd->supported = SUPPORTED_TP;
	199	reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD,
	200	MDIO_SPEED);
	201	if (reg & MDIO_SPEED_10G)
	202	ecmd->supported \|= SUPPORTED_10000baseT_Full;
	203	if (reg & MDIO_PMA_SPEED_1000)
	204	ecmd->supported \|= (SUPPORTED_1000baseT_Full \|
	205	SUPPORTED_1000baseT_Half);
	206	if (reg & MDIO_PMA_SPEED_100)
	207	ecmd->supported \|= (SUPPORTED_100baseT_Full \|
	208	SUPPORTED_100baseT_Half);
	209	if (reg & MDIO_PMA_SPEED_10)
	210	ecmd->supported \|= (SUPPORTED_10baseT_Full \|
	211	SUPPORTED_10baseT_Half);
	212	ecmd->advertising = ADVERTISED_TP;
	213	break;
	214
	215	case MDIO_PMA_CTRL2_10GBCX4:
894b19a6 BH	216	ecmd->port = PORT_OTHER;
	217	ecmd->supported = 0;
	218	ecmd->advertising = 0;
	219	break;
	220
1b1c2e95 BH	221	case MDIO_PMA_CTRL2_10GBKX4:
	222	case MDIO_PMA_CTRL2_10GBKR:
	223	case MDIO_PMA_CTRL2_1000BKX:
	224	ecmd->port = PORT_OTHER;
894b19a6 BH	225	ecmd->supported = SUPPORTED_Backplane;
	226	reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD,
	227	MDIO_PMA_EXTABLE);
	228	if (reg & MDIO_PMA_EXTABLE_10GBKX4)
	229	ecmd->supported \|= SUPPORTED_10000baseKX4_Full;
	230	if (reg & MDIO_PMA_EXTABLE_10GBKR)
	231	ecmd->supported \|= SUPPORTED_10000baseKR_Full;
	232	if (reg & MDIO_PMA_EXTABLE_1000BKX)
	233	ecmd->supported \|= SUPPORTED_1000baseKX_Full;
	234	reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD,
	235	MDIO_PMA_10GBR_FECABLE);
	236	if (reg & MDIO_PMA_10GBR_FECABLE_ABLE)
	237	ecmd->supported \|= SUPPORTED_10000baseR_FEC;
	238	ecmd->advertising = ADVERTISED_Backplane;
1b1c2e95 BH	239	break;
	240
	241	/* All the other defined modes are flavours of optical */
	242	default:
	243	ecmd->port = PORT_FIBRE;
	244	ecmd->supported = SUPPORTED_FIBRE;
	245	ecmd->advertising = ADVERTISED_FIBRE;
	246	break;
	247	}
	248
	249	if (mdio->mmds & MDIO_DEVS_AN) {
	250	ecmd->supported \|= SUPPORTED_Autoneg;
	251	reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_AN,
	252	MDIO_CTRL1);
	253	if (reg & MDIO_AN_CTRL1_ENABLE) {
	254	ecmd->autoneg = AUTONEG_ENABLE;
	255	ecmd->advertising \|=
	256	ADVERTISED_Autoneg \|
	257	mdio45_get_an(mdio, MDIO_AN_ADVERTISE) \|
	258	npage_adv;
	259	} else {
	260	ecmd->autoneg = AUTONEG_DISABLE;
	261	}
	262	} else {
	263	ecmd->autoneg = AUTONEG_DISABLE;
	264	}
	265
	266	if (ecmd->autoneg) {
	267	u32 modes = 0;
0c09c1a4 BH	268	int an_stat = mdio->mdio_read(mdio->dev, mdio->prtad,
0c09c1a4 BH	269	MDIO_MMD_AN, MDIO_STAT1);
1b1c2e95 BH	270
	271	/* If AN is complete and successful, report best common
	272	* mode, otherwise report best advertised mode. */
0c09c1a4 BH	273	if (an_stat & MDIO_AN_STAT1_COMPLETE) {
	274	ecmd->lp_advertising =
	275	mdio45_get_an(mdio, MDIO_AN_LPA) \| npage_lpa;
	276	if (an_stat & MDIO_AN_STAT1_LPABLE)
	277	ecmd->lp_advertising \|= ADVERTISED_Autoneg;
	278	modes = ecmd->advertising & ecmd->lp_advertising;
	279	}
	280	if ((modes & ~ADVERTISED_Autoneg) == 0)
1b1c2e95 BH	281	modes = ecmd->advertising;
1b1c2e95 BH	282
894b19a6 BH	283	if (modes & (ADVERTISED_10000baseT_Full \|
	284	ADVERTISED_10000baseKX4_Full \|
	285	ADVERTISED_10000baseKR_Full)) {
1b1c2e95 BH	286	ecmd->speed = SPEED_10000;
	287	ecmd->duplex = DUPLEX_FULL;
	288	} else if (modes & (ADVERTISED_1000baseT_Full \|
894b19a6 BH	289	ADVERTISED_1000baseT_Half \|
894b19a6 BH	290	ADVERTISED_1000baseKX_Full)) {
1b1c2e95	291	ecmd->speed = SPEED_1000;
894b19a6	292	ecmd->duplex = !(modes & ADVERTISED_1000baseT_Half);
1b1c2e95 BH	293	} else if (modes & (ADVERTISED_100baseT_Full \|
	294	ADVERTISED_100baseT_Half)) {
	295	ecmd->speed = SPEED_100;
	296	ecmd->duplex = !!(modes & ADVERTISED_100baseT_Full);
	297	} else {
	298	ecmd->speed = SPEED_10;
	299	ecmd->duplex = !!(modes & ADVERTISED_10baseT_Full);
	300	}
	301	} else {
	302	/* Report forced settings */
	303	reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD,
	304	MDIO_CTRL1);
	305	ecmd->speed = (((reg & MDIO_PMA_CTRL1_SPEED1000) ? 100 : 1) *
	306	((reg & MDIO_PMA_CTRL1_SPEED100) ? 100 : 10));
	307	ecmd->duplex = (reg & MDIO_CTRL1_FULLDPLX \|\|
	308	ecmd->speed == SPEED_10000);
	309	}
d005ba6c BH	310
	311	/* 10GBASE-T MDI/MDI-X */
	312	if (ecmd->port == PORT_TP && ecmd->speed == SPEED_10000) {
	313	switch (mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD,
	314	MDIO_PMA_10GBT_SWAPPOL)) {
	315	case MDIO_PMA_10GBT_SWAPPOL_ABNX \| MDIO_PMA_10GBT_SWAPPOL_CDNX:
	316	ecmd->eth_tp_mdix = ETH_TP_MDI;
	317	break;
	318	case 0:
	319	ecmd->eth_tp_mdix = ETH_TP_MDI_X;
	320	break;
	321	default:
	322	/* It's complicated... */
	323	ecmd->eth_tp_mdix = ETH_TP_MDI_INVALID;
	324	break;
	325	}
	326	}
1b1c2e95 BH	327	}
	328	EXPORT_SYMBOL(mdio45_ethtool_gset_npage);
	329
af2a3eac BH	330	/**
	331	* mdio45_ethtool_spauseparam_an - set auto-negotiated pause parameters
	332	* @mdio: MDIO interface
	333	* @ecmd: Ethtool request structure
	334	*
	335	* This function assumes that the PHY has an auto-negotiation MMD. It
	336	* will enable and disable advertising of flow control as appropriate.
	337	*/
	338	void mdio45_ethtool_spauseparam_an(const struct mdio_if_info *mdio,
	339	const struct ethtool_pauseparam *ecmd)
	340	{
	341	int adv, old_adv;
	342
	343	WARN_ON(!(mdio->mmds & MDIO_DEVS_AN));
	344
	345	old_adv = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_AN,
	346	MDIO_AN_ADVERTISE);
767f4a7c BH	347	adv = ((old_adv & ~(ADVERTISE_PAUSE_CAP \| ADVERTISE_PAUSE_ASYM)) \|
	348	mii_advertise_flowctrl((ecmd->rx_pause ? FLOW_CTRL_RX : 0) \|
	349	(ecmd->tx_pause ? FLOW_CTRL_TX : 0)));
af2a3eac BH	350	if (adv != old_adv) {
	351	mdio->mdio_write(mdio->dev, mdio->prtad, MDIO_MMD_AN,
	352	MDIO_AN_ADVERTISE, adv);
	353	mdio45_nway_restart(mdio);
	354	}
	355	}
	356	EXPORT_SYMBOL(mdio45_ethtool_spauseparam_an);
	357
1b1c2e95 BH	358	/**
	359	* mdio_mii_ioctl - MII ioctl interface for MDIO (clause 22 or 45) PHYs
	360	* @mdio: MDIO interface
	361	* @mii_data: MII ioctl data structure
	362	* @cmd: MII ioctl command
	363	*
	364	* Returns 0 on success, negative on error.
	365	*/
	366	int mdio_mii_ioctl(const struct mdio_if_info *mdio,
	367	struct mii_ioctl_data *mii_data, int cmd)
	368	{
	369	int prtad, devad;
	370	u16 addr = mii_data->reg_num;
	371
	372	/* Validate/convert cmd to one of SIOC{G,S}MIIREG */
	373	switch (cmd) {
	374	case SIOCGMIIPHY:
	375	if (mdio->prtad == MDIO_PRTAD_NONE)
	376	return -EOPNOTSUPP;
	377	mii_data->phy_id = mdio->prtad;
	378	cmd = SIOCGMIIREG;
	379	break;
	380	case SIOCGMIIREG:
1b1c2e95	381	case SIOCSMIIREG:
1b1c2e95 BH	382	break;
	383	default:
	384	return -EOPNOTSUPP;
	385	}
	386
	387	/* Validate/convert phy_id */
	388	if ((mdio->mode_support & MDIO_SUPPORTS_C45) &&
	389	mdio_phy_id_is_c45(mii_data->phy_id)) {
	390	prtad = mdio_phy_id_prtad(mii_data->phy_id);
	391	devad = mdio_phy_id_devad(mii_data->phy_id);
	392	} else if ((mdio->mode_support & MDIO_SUPPORTS_C22) &&
	393	mii_data->phy_id < 0x20) {
	394	prtad = mii_data->phy_id;
	395	devad = MDIO_DEVAD_NONE;
	396	addr &= 0x1f;
	397	} else if ((mdio->mode_support & MDIO_EMULATE_C22) &&
	398	mdio->prtad != MDIO_PRTAD_NONE &&
	399	mii_data->phy_id == mdio->prtad) {
	400	/* Remap commonly-used MII registers. */
	401	prtad = mdio->prtad;
	402	switch (addr) {
	403	case MII_BMCR:
	404	case MII_BMSR:
	405	case MII_PHYSID1:
	406	case MII_PHYSID2:
	407	devad = __ffs(mdio->mmds);
	408	break;
	409	case MII_ADVERTISE:
	410	case MII_LPA:
	411	if (!(mdio->mmds & MDIO_DEVS_AN))
	412	return -EINVAL;
	413	devad = MDIO_MMD_AN;
	414	if (addr == MII_ADVERTISE)
	415	addr = MDIO_AN_ADVERTISE;
	416	else
	417	addr = MDIO_AN_LPA;
	418	break;
	419	default:
	420	return -EINVAL;
	421	}
	422	} else {
	423	return -EINVAL;
	424	}
	425
	426	if (cmd == SIOCGMIIREG) {
	427	int rc = mdio->mdio_read(mdio->dev, prtad, devad, addr);
	428	if (rc < 0)
	429	return rc;
	430	mii_data->val_out = rc;
	431	return 0;
	432	} else {
	433	return mdio->mdio_write(mdio->dev, prtad, devad, addr,
	434	mii_data->val_in);
	435	}
	436	}
	437	EXPORT_SYMBOL(mdio_mii_ioctl);