projects / deliverable / linux.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
pcmcia: pcmcia_config_loop() improvement by passing vcc
[deliverable/linux.git] / drivers / net / pcmcia / pcnet_cs.c
CommitLineData
1da177e4
LT		 1/*======================================================================
2
3 A PCMCIA ethernet driver for NS8390-based cards
4
5 This driver supports the D-Link DE-650 and Linksys EthernetCard
6 cards, the newer D-Link and Linksys combo cards, Accton EN2212
7 cards, the RPTI EP400, and the PreMax PE-200 in non-shared-memory
8 mode, and the IBM Credit Card Adapter, the NE4100, the Thomas
9 Conrad ethernet card, and the Kingston KNE-PCM/x in shared-memory
10 mode. It will also handle the Socket EA card in either mode.
11
12 Copyright (C) 1999 David A. Hinds -- dahinds@users.sourceforge.net
13
14 pcnet_cs.c 1.153 2003/11/09 18:53:09
6ed14254 15
1da177e4
LT		 16 The network driver code is based on Donald Becker's NE2000 code:
17
18 Written 1992,1993 by Donald Becker.
19 Copyright 1993 United States Government as represented by the
20 Director, National Security Agency. This software may be used and
21 distributed according to the terms of the GNU General Public License,
22 incorporated herein by reference.
23 Donald Becker may be reached at becker@scyld.com
24
25 Based also on Keith Moore's changes to Don Becker's code, for IBM
26 CCAE support. Drivers merged back together, and shared-memory
27 Socket EA support added, by Ken Raeburn, September 1995.
28
29======================================================================*/
30
31#include <linux/kernel.h>
32#include <linux/module.h>
33#include <linux/init.h>
34#include <linux/ptrace.h>
35#include <linux/slab.h>
36#include <linux/string.h>
37#include <linux/timer.h>
38#include <linux/delay.h>
39#include <linux/ethtool.h>
40#include <linux/netdevice.h>
9329f4e4 41#include <linux/log2.h>
0795af57 42#include "../8390.h"
1da177e4 43
1da177e4
LT		 44#include <pcmcia/cs_types.h>
45#include <pcmcia/cs.h>
46#include <pcmcia/cistpl.h>
47#include <pcmcia/ciscode.h>
48#include <pcmcia/ds.h>
49#include <pcmcia/cisreg.h>
50
51#include <asm/io.h>
52#include <asm/system.h>
53#include <asm/byteorder.h>
54#include <asm/uaccess.h>
55
56#define PCNET_CMD 0x00
57#define PCNET_DATAPORT 0x10 /* NatSemi-defined port window offset. */
58#define PCNET_RESET 0x1f /* Issue a read to reset, a write to clear. */
59#define PCNET_MISC 0x18 /* For IBM CCAE and Socket EA cards */
60
61#define PCNET_START_PG 0x40 /* First page of TX buffer */
62#define PCNET_STOP_PG 0x80 /* Last page +1 of RX ring */
63
64/* Socket EA cards have a larger packet buffer */
65#define SOCKET_START_PG 0x01
66#define SOCKET_STOP_PG 0xff
67
68#define PCNET_RDC_TIMEOUT (2*HZ/100) /* Max wait in jiffies for Tx RDC */
69
f71e1309 70static const char *if_names[] = { "auto", "10baseT", "10base2"};
1da177e4
LT		 71
72#ifdef PCMCIA_DEBUG
73static int pc_debug = PCMCIA_DEBUG;
74module_param(pc_debug, int, 0);
75#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
76static char *version =
77"pcnet_cs.c 1.153 2003/11/09 18:53:09 (David Hinds)";
78#else
79#define DEBUG(n, args...)
80#endif
81
82/*====================================================================*/
83
84/* Module parameters */
85
86MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>");
87MODULE_DESCRIPTION("NE2000 compatible PCMCIA ethernet driver");
88MODULE_LICENSE("GPL");
89
90#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
91
92INT_MODULE_PARM(if_port, 1); /* Transceiver type */
93INT_MODULE_PARM(use_big_buf, 1); /* use 64K packet buffer? */
94INT_MODULE_PARM(mem_speed, 0); /* shared mem speed, in ns */
95INT_MODULE_PARM(delay_output, 0); /* pause after xmit? */
96INT_MODULE_PARM(delay_time, 4); /* in usec */
97INT_MODULE_PARM(use_shmem, -1); /* use shared memory? */
98INT_MODULE_PARM(full_duplex, 0); /* full duplex? */
99
100/* Ugh! Let the user hardwire the hardware address for queer cards */
101static int hw_addr[6] = { 0, /* ... */ };
102module_param_array(hw_addr, int, NULL, 0);
103
104/*====================================================================*/
105
106static void mii_phy_probe(struct net_device *dev);
15b99ac1 107static int pcnet_config(struct pcmcia_device *link);
fba395ee 108static void pcnet_release(struct pcmcia_device *link);
1da177e4
LT		 109static int pcnet_open(struct net_device *dev);
110static int pcnet_close(struct net_device *dev);
111static int ei_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
7282d491 112static const struct ethtool_ops netdev_ethtool_ops;
7d12e780 113static irqreturn_t ei_irq_wrapper(int irq, void *dev_id);
1da177e4
LT		 114static void ei_watchdog(u_long arg);
115static void pcnet_reset_8390(struct net_device *dev);
116static int set_config(struct net_device *dev, struct ifmap *map);
fba395ee 117static int setup_shmem_window(struct pcmcia_device *link, int start_pg,
1da177e4 118 int stop_pg, int cm_offset);
fba395ee 119static int setup_dma_config(struct pcmcia_device *link, int start_pg,
1da177e4
LT		 120 int stop_pg);
121
cc3b4866 122static void pcnet_detach(struct pcmcia_device *p_dev);
1da177e4
LT		 123
124static dev_info_t dev_info = "pcnet_cs";
1da177e4
LT		 125
126/*====================================================================*/
127
128typedef struct hw_info_t {
129 u_int offset;
130 u_char a0, a1, a2;
131 u_int flags;
132} hw_info_t;
133
134#define DELAY_OUTPUT 0x01
135#define HAS_MISC_REG 0x02
136#define USE_BIG_BUF 0x04
137#define HAS_IBM_MISC 0x08
138#define IS_DL10019 0x10
139#define IS_DL10022 0x20
140#define HAS_MII 0x40
141#define USE_SHMEM 0x80 /* autodetected */
142
143#define AM79C9XX_HOME_PHY 0x00006B90 /* HomePNA PHY */
144#define AM79C9XX_ETH_PHY 0x00006B70 /* 10baseT PHY */
145#define MII_PHYID_REV_MASK 0xfffffff0
146#define MII_PHYID_REG1 0x02
147#define MII_PHYID_REG2 0x03
148
149static hw_info_t hw_info[] = {
6ed14254 150 { /* Accton EN2212 */ 0x0ff0, 0x00, 0x00, 0xe8, DELAY_OUTPUT },
1da177e4
LT		 151 { /* Allied Telesis LA-PCM */ 0x0ff0, 0x00, 0x00, 0xf4, 0 },
152 { /* APEX MultiCard */ 0x03f4, 0x00, 0x20, 0xe5, 0 },
153 { /* ASANTE FriendlyNet */ 0x4910, 0x00, 0x00, 0x94,
154 DELAY_OUTPUT | HAS_IBM_MISC },
155 { /* Danpex EN-6200P2 */ 0x0110, 0x00, 0x40, 0xc7, 0 },
156 { /* DataTrek NetCard */ 0x0ff0, 0x00, 0x20, 0xe8, 0 },
157 { /* Dayna CommuniCard E */ 0x0110, 0x00, 0x80, 0x19, 0 },
158 { /* D-Link DE-650 */ 0x0040, 0x00, 0x80, 0xc8, 0 },
159 { /* EP-210 Ethernet */ 0x0110, 0x00, 0x40, 0x33, 0 },
160 { /* EP4000 Ethernet */ 0x01c0, 0x00, 0x00, 0xb4, 0 },
161 { /* Epson EEN10B */ 0x0ff0, 0x00, 0x00, 0x48,
162 HAS_MISC_REG | HAS_IBM_MISC },
163 { /* ELECOM Laneed LD-CDWA */ 0xb8, 0x08, 0x00, 0x42, 0 },
164 { /* Hypertec Ethernet */ 0x01c0, 0x00, 0x40, 0x4c, 0 },
165 { /* IBM CCAE */ 0x0ff0, 0x08, 0x00, 0x5a,
166 HAS_MISC_REG | HAS_IBM_MISC },
167 { /* IBM CCAE */ 0x0ff0, 0x00, 0x04, 0xac,
168 HAS_MISC_REG | HAS_IBM_MISC },
169 { /* IBM CCAE */ 0x0ff0, 0x00, 0x06, 0x29,
170 HAS_MISC_REG | HAS_IBM_MISC },
171 { /* IBM FME */ 0x0374, 0x08, 0x00, 0x5a,
172 HAS_MISC_REG | HAS_IBM_MISC },
173 { /* IBM FME */ 0x0374, 0x00, 0x04, 0xac,
174 HAS_MISC_REG | HAS_IBM_MISC },
175 { /* Kansai KLA-PCM/T */ 0x0ff0, 0x00, 0x60, 0x87,
176 HAS_MISC_REG | HAS_IBM_MISC },
177 { /* NSC DP83903 */ 0x0374, 0x08, 0x00, 0x17,
178 HAS_MISC_REG | HAS_IBM_MISC },
179 { /* NSC DP83903 */ 0x0374, 0x00, 0xc0, 0xa8,
180 HAS_MISC_REG | HAS_IBM_MISC },
181 { /* NSC DP83903 */ 0x0374, 0x00, 0xa0, 0xb0,
182 HAS_MISC_REG | HAS_IBM_MISC },
183 { /* NSC DP83903 */ 0x0198, 0x00, 0x20, 0xe0,
184 HAS_MISC_REG | HAS_IBM_MISC },
185 { /* I-O DATA PCLA/T */ 0x0ff0, 0x00, 0xa0, 0xb0, 0 },
186 { /* Katron PE-520 */ 0x0110, 0x00, 0x40, 0xf6, 0 },
187 { /* Kingston KNE-PCM/x */ 0x0ff0, 0x00, 0xc0, 0xf0,
188 HAS_MISC_REG | HAS_IBM_MISC },
189 { /* Kingston KNE-PCM/x */ 0x0ff0, 0xe2, 0x0c, 0x0f,
190 HAS_MISC_REG | HAS_IBM_MISC },
191 { /* Kingston KNE-PC2 */ 0x0180, 0x00, 0xc0, 0xf0, 0 },
192 { /* Maxtech PCN2000 */ 0x5000, 0x00, 0x00, 0xe8, 0 },
193 { /* NDC Instant-Link */ 0x003a, 0x00, 0x80, 0xc6, 0 },
194 { /* NE2000 Compatible */ 0x0ff0, 0x00, 0xa0, 0x0c, 0 },
195 { /* Network General Sniffer */ 0x0ff0, 0x00, 0x00, 0x65,
196 HAS_MISC_REG | HAS_IBM_MISC },
6ed14254 197 { /* Panasonic VEL211 */ 0x0ff0, 0x00, 0x80, 0x45,
1da177e4
LT		 198 HAS_MISC_REG | HAS_IBM_MISC },
199 { /* PreMax PE-200 */ 0x07f0, 0x00, 0x20, 0xe0, 0 },
200 { /* RPTI EP400 */ 0x0110, 0x00, 0x40, 0x95, 0 },
201 { /* SCM Ethernet */ 0x0ff0, 0x00, 0x20, 0xcb, 0 },
202 { /* Socket EA */ 0x4000, 0x00, 0xc0, 0x1b,
203 DELAY_OUTPUT | HAS_MISC_REG | USE_BIG_BUF },
204 { /* Socket LP-E CF+ */ 0x01c0, 0x00, 0xc0, 0x1b, 0 },
205 { /* SuperSocket RE450T */ 0x0110, 0x00, 0xe0, 0x98, 0 },
206 { /* Volktek NPL-402CT */ 0x0060, 0x00, 0x40, 0x05, 0 },
207 { /* NEC PC-9801N-J12 */ 0x0ff0, 0x00, 0x00, 0x4c, 0 },
208 { /* PCMCIA Technology OEM */ 0x01c8, 0x00, 0xa0, 0x0c, 0 }
209};
210
ff8ac609 211#define NR_INFO ARRAY_SIZE(hw_info)
1da177e4
LT		 212
213static hw_info_t default_info = { 0, 0, 0, 0, 0 };
214static hw_info_t dl10019_info = { 0, 0, 0, 0, IS_DL10019|HAS_MII };
215static hw_info_t dl10022_info = { 0, 0, 0, 0, IS_DL10022|HAS_MII };
216
217typedef struct pcnet_dev_t {
fd238232 218 struct pcmcia_device *p_dev;
1da177e4
LT		 219 dev_node_t node;
220 u_int flags;
221 void __iomem *base;
222 struct timer_list watchdog;
223 int stale, fast_poll;
224 u_char phy_id;
225 u_char eth_phy, pna_phy;
226 u_short link_status;
227 u_long mii_reset;
228} pcnet_dev_t;
229
230static inline pcnet_dev_t *PRIV(struct net_device *dev)
231{
232 char *p = netdev_priv(dev);
233 return (pcnet_dev_t *)(p + sizeof(struct ei_device));
234}
235
236/*======================================================================
237
238 pcnet_attach() creates an "instance" of the driver, allocating
239 local data structures for one device. The device is registered
240 with Card Services.
241
242======================================================================*/
243
fba395ee 244static int pcnet_probe(struct pcmcia_device *link)
1da177e4
LT		 245{
246 pcnet_dev_t *info;
1da177e4 247 struct net_device *dev;
1da177e4
LT		 248
249 DEBUG(0, "pcnet_attach()\n");
250
251 /* Create new ethernet device */
252 dev = __alloc_ei_netdev(sizeof(pcnet_dev_t));
f8cfa618 253 if (!dev) return -ENOMEM;
1da177e4 254 info = PRIV(dev);
fba395ee 255 info->p_dev = link;
1da177e4
LT		 256 link->priv = dev;
257
5e7bf8cc 258 link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
1da177e4
LT		 259 link->irq.IRQInfo1 = IRQ_LEVEL_ID;
260 link->conf.Attributes = CONF_ENABLE_IRQ;
261 link->conf.IntType = INT_MEMORY_AND_IO;
262
1da177e4
LT		 263 dev->open = &pcnet_open;
264 dev->stop = &pcnet_close;
265 dev->set_config = &set_config;
266
15b99ac1 267 return pcnet_config(link);
1da177e4
LT		 268} /* pcnet_attach */
269
270/*======================================================================
271
272 This deletes a driver "instance". The device is de-registered
273 with Card Services. If it has been released, all local data
274 structures are freed. Otherwise, the structures will be freed
275 when the device is released.
276
277======================================================================*/
278
fba395ee 279static void pcnet_detach(struct pcmcia_device *link)
1da177e4 280{
cc3b4866 281 struct net_device *dev = link->priv;
1da177e4 282
cc3b4866 283 DEBUG(0, "pcnet_detach(0x%p)\n", link);
1da177e4 284
fd238232 285 if (link->dev_node)
cc3b4866 286 unregister_netdev(dev);
1da177e4 287
e2d40963 288 pcnet_release(link);
1da177e4 289
cc3b4866 290 free_netdev(dev);
1da177e4
LT		 291} /* pcnet_detach */
292
293/*======================================================================
294
295 This probes for a card's hardware address, for card types that
296 encode this information in their CIS.
297
298======================================================================*/
299
fba395ee 300static hw_info_t *get_hwinfo(struct pcmcia_device *link)
1da177e4
LT		 301{
302 struct net_device *dev = link->priv;
303 win_req_t req;
304 memreq_t mem;
305 u_char __iomem *base, *virt;
306 int i, j;
307
308 /* Allocate a small memory window */
309 req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
310 req.Base = 0; req.Size = 0;
311 req.AccessSpeed = 0;
fba395ee 312 i = pcmcia_request_window(&link, &req, &link->win);
1da177e4 313 if (i != CS_SUCCESS) {
fba395ee 314 cs_error(link, RequestWindow, i);
1da177e4
LT		 315 return NULL;
316 }
317
318 virt = ioremap(req.Base, req.Size);
319 mem.Page = 0;
320 for (i = 0; i < NR_INFO; i++) {
321 mem.CardOffset = hw_info[i].offset & ~(req.Size-1);
322 pcmcia_map_mem_page(link->win, &mem);
323 base = &virt[hw_info[i].offset & (req.Size-1)];
324 if ((readb(base+0) == hw_info[i].a0) &&
325 (readb(base+2) == hw_info[i].a1) &&
326 (readb(base+4) == hw_info[i].a2))
327 break;
328 }
329 if (i < NR_INFO) {
330 for (j = 0; j < 6; j++)
331 dev->dev_addr[j] = readb(base + (j<<1));
332 }
6ed14254 333
1da177e4
LT		 334 iounmap(virt);
335 j = pcmcia_release_window(link->win);
336 if (j != CS_SUCCESS)
fba395ee 337 cs_error(link, ReleaseWindow, j);
1da177e4
LT		 338 return (i < NR_INFO) ? hw_info+i : NULL;
339} /* get_hwinfo */
340
341/*======================================================================
342
343 This probes for a card's hardware address by reading the PROM.
344 It checks the address against a list of known types, then falls
345 back to a simple NE2000 clone signature check.
346
347======================================================================*/
348
fba395ee 349static hw_info_t *get_prom(struct pcmcia_device *link)
1da177e4
LT		 350{
351 struct net_device *dev = link->priv;
906da809 352 unsigned int ioaddr = dev->base_addr;
1da177e4
LT		 353 u_char prom[32];
354 int i, j;
355
356 /* This is lifted straight from drivers/net/ne.c */
357 struct {
358 u_char value, offset;
359 } program_seq[] = {
360 {E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD}, /* Select page 0*/
361 {0x48, EN0_DCFG}, /* Set byte-wide (0x48) access. */
362 {0x00, EN0_RCNTLO}, /* Clear the count regs. */
363 {0x00, EN0_RCNTHI},
364 {0x00, EN0_IMR}, /* Mask completion irq. */
365 {0xFF, EN0_ISR},
366 {E8390_RXOFF, EN0_RXCR}, /* 0x20 Set to monitor */
367 {E8390_TXOFF, EN0_TXCR}, /* 0x02 and loopback mode. */
368 {32, EN0_RCNTLO},
369 {0x00, EN0_RCNTHI},
370 {0x00, EN0_RSARLO}, /* DMA starting at 0x0000. */
371 {0x00, EN0_RSARHI},
372 {E8390_RREAD+E8390_START, E8390_CMD},
373 };
374
375 pcnet_reset_8390(dev);
376 mdelay(10);
377
ff8ac609 378 for (i = 0; i < ARRAY_SIZE(program_seq); i++)
1da177e4
LT		 379 outb_p(program_seq[i].value, ioaddr + program_seq[i].offset);
380
381 for (i = 0; i < 32; i++)
382 prom[i] = inb(ioaddr + PCNET_DATAPORT);
383 for (i = 0; i < NR_INFO; i++) {
384 if ((prom[0] == hw_info[i].a0) &&
385 (prom[2] == hw_info[i].a1) &&
386 (prom[4] == hw_info[i].a2))
387 break;
388 }
389 if ((i < NR_INFO) || ((prom[28] == 0x57) && (prom[30] == 0x57))) {
390 for (j = 0; j < 6; j++)
391 dev->dev_addr[j] = prom[j<<1];
392 return (i < NR_INFO) ? hw_info+i : &default_info;
393 }
394 return NULL;
395} /* get_prom */
396
397/*======================================================================
398
399 For DL10019 based cards, like the Linksys EtherFast
400
401======================================================================*/
402
fba395ee 403static hw_info_t *get_dl10019(struct pcmcia_device *link)
1da177e4
LT		 404{
405 struct net_device *dev = link->priv;
406 int i;
407 u_char sum;
408
409 for (sum = 0, i = 0x14; i < 0x1c; i++)
410 sum += inb_p(dev->base_addr + i);
411 if (sum != 0xff)
412 return NULL;
413 for (i = 0; i < 6; i++)
414 dev->dev_addr[i] = inb_p(dev->base_addr + 0x14 + i);
415 i = inb(dev->base_addr + 0x1f);
416 return ((i == 0x91)||(i == 0x99)) ? &dl10022_info : &dl10019_info;
417}
418
419/*======================================================================
420
421 For Asix AX88190 based cards
422
423======================================================================*/
424
fba395ee 425static hw_info_t *get_ax88190(struct pcmcia_device *link)
1da177e4
LT		 426{
427 struct net_device *dev = link->priv;
906da809 428 unsigned int ioaddr = dev->base_addr;
1da177e4
LT		 429 int i, j;
430
431 /* Not much of a test, but the alternatives are messy */
432 if (link->conf.ConfigBase != 0x03c0)
433 return NULL;
434
435 outb_p(0x01, ioaddr + EN0_DCFG); /* Set word-wide access. */
436 outb_p(0x00, ioaddr + EN0_RSARLO); /* DMA starting at 0x0400. */
437 outb_p(0x04, ioaddr + EN0_RSARHI);
438 outb_p(E8390_RREAD+E8390_START, ioaddr + E8390_CMD);
439
440 for (i = 0; i < 6; i += 2) {
441 j = inw(ioaddr + PCNET_DATAPORT);
442 dev->dev_addr[i] = j & 0xff;
443 dev->dev_addr[i+1] = j >> 8;
444 }
445 printk(KERN_NOTICE "pcnet_cs: this is an AX88190 card!\n");
446 printk(KERN_NOTICE "pcnet_cs: use axnet_cs instead.\n");
447 return NULL;
448}
449
450/*======================================================================
451
452 This should be totally unnecessary... but when we can't figure
453 out the hardware address any other way, we'll let the user hard
454 wire it when the module is initialized.
455
456======================================================================*/
457
fba395ee 458static hw_info_t *get_hwired(struct pcmcia_device *link)
1da177e4
LT		 459{
460 struct net_device *dev = link->priv;
461 int i;
462
463 for (i = 0; i < 6; i++)
464 if (hw_addr[i] != 0) break;
465 if (i == 6)
466 return NULL;
467
468 for (i = 0; i < 6; i++)
469 dev->dev_addr[i] = hw_addr[i];
470
471 return &default_info;
472} /* get_hwired */
473
474/*======================================================================
475
476 pcnet_config() is scheduled to run after a CARD_INSERTION event
477 is received, to configure the PCMCIA socket, and to make the
478 ethernet device available to the system.
479
480======================================================================*/
481
482#define CS_CHECK(fn, ret) \
483do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
484
fba395ee 485static int try_io_port(struct pcmcia_device *link)
1da177e4
LT		 486{
487 int j, ret;
488 if (link->io.NumPorts1 == 32) {
489 link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
490 if (link->io.NumPorts2 > 0) {
491 /* for master/slave multifunction cards */
492 link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
6ed14254 493 link->irq.Attributes =
1da177e4
LT		 494 IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED;
495 }
496 } else {
497 /* This should be two 16-port windows */
498 link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
499 link->io.Attributes2 = IO_DATA_PATH_WIDTH_16;
500 }
501 if (link->io.BasePort1 == 0) {
502 link->io.IOAddrLines = 16;
503 for (j = 0; j < 0x400; j += 0x20) {
504 link->io.BasePort1 = j ^ 0x300;
505 link->io.BasePort2 = (j ^ 0x300) + 0x10;
fba395ee 506 ret = pcmcia_request_io(link, &link->io);
1da177e4
LT		 507 if (ret == CS_SUCCESS) return ret;
508 }
509 return ret;
510 } else {
fba395ee 511 return pcmcia_request_io(link, &link->io);
1da177e4
LT		 512 }
513}
514
b54bf94b
DB		 515static int pcnet_confcheck(struct pcmcia_device *p_dev,
516 cistpl_cftable_entry_t *cfg,
8e2fc39d 517 cistpl_cftable_entry_t *dflt,
ad913c11 518 unsigned int vcc,
b54bf94b
DB		 519 void *priv_data)
520{
521 int *has_shmem = priv_data;
522 int i;
523 cistpl_io_t *io = &cfg->io;
524
525 if (cfg->index == 0 || cfg->io.nwin == 0)
526 return -EINVAL;
527
b54bf94b
DB		 528 /* For multifunction cards, by convention, we configure the
529 network function with window 0, and serial with window 1 */
530 if (io->nwin > 1) {
531 i = (io->win[1].len > io->win[0].len);
532 p_dev->io.BasePort2 = io->win[1-i].base;
533 p_dev->io.NumPorts2 = io->win[1-i].len;
534 } else {
535 i = p_dev->io.NumPorts2 = 0;
536 }
537
538 *has_shmem = ((cfg->mem.nwin == 1) &&
539 (cfg->mem.win[0].len >= 0x4000));
540 p_dev->io.BasePort1 = io->win[i].base;
541 p_dev->io.NumPorts1 = io->win[i].len;
542 p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
543 if (p_dev->io.NumPorts1 + p_dev->io.NumPorts2 >= 32)
544 return try_io_port(p_dev);
545
546 return 0;
547}
548
15b99ac1 549static int pcnet_config(struct pcmcia_device *link)
1da177e4 550{
1da177e4
LT		 551 struct net_device *dev = link->priv;
552 pcnet_dev_t *info = PRIV(dev);
b54bf94b 553 int last_ret, last_fn, start_pg, stop_pg, cm_offset;
efd50585 554 int has_shmem = 0;
9ab9898e 555 hw_info_t *local_hw_info;
0795af57 556 DECLARE_MAC_BUF(mac);
1da177e4
LT		 557
558 DEBUG(0, "pcnet_config(0x%p)\n", link);
559
b54bf94b
DB		 560 last_ret = pcmcia_loop_config(link, pcnet_confcheck, &has_shmem);
561 if (last_ret) {
fba395ee 562 cs_error(link, RequestIO, last_ret);
1da177e4
LT		 563 goto failed;
564 }
565
fba395ee 566 CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
6ed14254 567
1da177e4
LT		 568 if (link->io.NumPorts2 == 8) {
569 link->conf.Attributes |= CONF_ENABLE_SPKR;
570 link->conf.Status = CCSR_AUDIO_ENA;
571 }
efd50585
DB		 572 if ((link->manf_id == MANFID_IBM) &&
573 (link->card_id == PRODID_IBM_HOME_AND_AWAY))
1da177e4 574 link->conf.ConfigIndex |= 0x10;
6ed14254 575
fba395ee 576 CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
1da177e4
LT		 577 dev->irq = link->irq.AssignedIRQ;
578 dev->base_addr = link->io.BasePort1;
579 if (info->flags & HAS_MISC_REG) {
580 if ((if_port == 1) || (if_port == 2))
581 dev->if_port = if_port;
582 else
583 printk(KERN_NOTICE "pcnet_cs: invalid if_port requested\n");
584 } else {
585 dev->if_port = 0;
586 }
587
61da96be
K		 588 if ((link->conf.ConfigBase == 0x03c0)
589 && (link->manf_id == 0x149) && (link->card_id = 0xc1ab)) {
590 printk(KERN_INFO "pcnet_cs: this is an AX88190 card!\n");
591 printk(KERN_INFO "pcnet_cs: use axnet_cs instead.\n");
592 goto failed;
593 }
594
9ab9898e
RK		 595 local_hw_info = get_hwinfo(link);
596 if (local_hw_info == NULL)
597 local_hw_info = get_prom(link);
598 if (local_hw_info == NULL)
599 local_hw_info = get_dl10019(link);
600 if (local_hw_info == NULL)
601 local_hw_info = get_ax88190(link);
602 if (local_hw_info == NULL)
603 local_hw_info = get_hwired(link);
604
605 if (local_hw_info == NULL) {
1da177e4
LT		 606 printk(KERN_NOTICE "pcnet_cs: unable to read hardware net"
607 " address for io base %#3lx\n", dev->base_addr);
608 goto failed;
609 }
610
9ab9898e 611 info->flags = local_hw_info->flags;
1da177e4
LT		 612 /* Check for user overrides */
613 info->flags |= (delay_output) ? DELAY_OUTPUT : 0;
efd50585
DB		 614 if ((link->manf_id == MANFID_SOCKET) &&
615 ((link->card_id == PRODID_SOCKET_LPE) ||
616 (link->card_id == PRODID_SOCKET_LPE_CF) ||
617 (link->card_id == PRODID_SOCKET_EIO)))
1da177e4
LT		 618 info->flags &= ~USE_BIG_BUF;
619 if (!use_big_buf)
620 info->flags &= ~USE_BIG_BUF;
6ed14254 621
1da177e4
LT		 622 if (info->flags & USE_BIG_BUF) {
623 start_pg = SOCKET_START_PG;
624 stop_pg = SOCKET_STOP_PG;
625 cm_offset = 0x10000;
626 } else {
627 start_pg = PCNET_START_PG;
628 stop_pg = PCNET_STOP_PG;
629 cm_offset = 0;
630 }
631
632 /* has_shmem is ignored if use_shmem != -1 */
633 if ((use_shmem == 0) || (!has_shmem && (use_shmem == -1)) ||
634 (setup_shmem_window(link, start_pg, stop_pg, cm_offset) != 0))
635 setup_dma_config(link, start_pg, stop_pg);
636
637 ei_status.name = "NE2000";
638 ei_status.word16 = 1;
639 ei_status.reset_8390 = &pcnet_reset_8390;
640
641 SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops);
642
643 if (info->flags & (IS_DL10019|IS_DL10022)) {
1da177e4
LT		 644 dev->do_ioctl = &ei_ioctl;
645 mii_phy_probe(dev);
1da177e4
LT		 646 }
647
fd238232 648 link->dev_node = &info->node;
fba395ee 649 SET_NETDEV_DEV(dev, &handle_to_dev(link));
1da177e4
LT		 650
651#ifdef CONFIG_NET_POLL_CONTROLLER
652 dev->poll_controller = ei_poll;
653#endif
654
655 if (register_netdev(dev) != 0) {
656 printk(KERN_NOTICE "pcnet_cs: register_netdev() failed\n");
fd238232 657 link->dev_node = NULL;
1da177e4
LT		 658 goto failed;
659 }
660
661 strcpy(info->node.dev_name, dev->name);
662
663 if (info->flags & (IS_DL10019|IS_DL10022)) {
664 u_char id = inb(dev->base_addr + 0x1a);
665 printk(KERN_INFO "%s: NE2000 (DL100%d rev %02x): ",
666 dev->name, ((info->flags & IS_DL10022) ? 22 : 19), id);
667 if (info->pna_phy)
668 printk("PNA, ");
669 } else {
670 printk(KERN_INFO "%s: NE2000 Compatible: ", dev->name);
671 }
672 printk("io %#3lx, irq %d,", dev->base_addr, dev->irq);
673 if (info->flags & USE_SHMEM)
674 printk (" mem %#5lx,", dev->mem_start);
675 if (info->flags & HAS_MISC_REG)
676 printk(" %s xcvr,", if_names[dev->if_port]);
0795af57 677 printk(" hw_addr %s\n", print_mac(mac, dev->dev_addr));
15b99ac1 678 return 0;
1da177e4
LT		 679
680cs_failed:
fba395ee 681 cs_error(link, last_fn, last_ret);
1da177e4
LT		 682failed:
683 pcnet_release(link);
15b99ac1 684 return -ENODEV;
1da177e4
LT		 685} /* pcnet_config */
686
687/*======================================================================
688
689 After a card is removed, pcnet_release() will unregister the net
690 device, and release the PCMCIA configuration. If the device is
691 still open, this will be postponed until it is closed.
692
693======================================================================*/
694
fba395ee 695static void pcnet_release(struct pcmcia_device *link)
1da177e4 696{
5f2a71fc 697 pcnet_dev_t *info = PRIV(link->priv);
1da177e4 698
5f2a71fc 699 DEBUG(0, "pcnet_release(0x%p)\n", link);
1da177e4 700
5f2a71fc
DB		 701 if (info->flags & USE_SHMEM)
702 iounmap(info->base);
1da177e4 703
fba395ee 704 pcmcia_disable_device(link);
1da177e4
LT		 705}
706
707/*======================================================================
708
709 The card status event handler. Mostly, this schedules other
710 stuff to run after an event is received. A CARD_REMOVAL event
711 also sets some flags to discourage the net drivers from trying
712 to talk to the card any more.
713
714======================================================================*/
715
fba395ee 716static int pcnet_suspend(struct pcmcia_device *link)
98e4c28b 717{
98e4c28b
DB		 718 struct net_device *dev = link->priv;
719
e2d40963 720 if (link->open)
8661bb5b 721 netif_device_detach(dev);
98e4c28b
DB		 722
723 return 0;
724}
725
fba395ee 726static int pcnet_resume(struct pcmcia_device *link)
98e4c28b 727{
98e4c28b
DB		 728 struct net_device *dev = link->priv;
729
e2d40963 730 if (link->open) {
8661bb5b
DB		 731 pcnet_reset_8390(dev);
732 NS8390_init(dev, 1);
733 netif_device_attach(dev);
98e4c28b
DB		 734 }
735
736 return 0;
737}
738
1da177e4
LT		 739
740/*======================================================================
741
742 MII interface support for DL10019 and DL10022 based cards
743
744 On the DL10019, the MII IO direction bit is 0x10; on the DL10022
745 it is 0x20. Setting both bits seems to work on both card types.
746
747======================================================================*/
748
749#define DLINK_GPIO 0x1c
750#define DLINK_DIAG 0x1d
751#define DLINK_EEPROM 0x1e
752
753#define MDIO_SHIFT_CLK 0x80
754#define MDIO_DATA_OUT 0x40
755#define MDIO_DIR_WRITE 0x30
756#define MDIO_DATA_WRITE0 (MDIO_DIR_WRITE)
757#define MDIO_DATA_WRITE1 (MDIO_DIR_WRITE | MDIO_DATA_OUT)
758#define MDIO_DATA_READ 0x10
759#define MDIO_MASK 0x0f
760
906da809 761static void mdio_sync(unsigned int addr)
1da177e4
LT		 762{
763 int bits, mask = inb(addr) & MDIO_MASK;
764 for (bits = 0; bits < 32; bits++) {
765 outb(mask | MDIO_DATA_WRITE1, addr);
766 outb(mask | MDIO_DATA_WRITE1 | MDIO_SHIFT_CLK, addr);
767 }
768}
769
906da809 770static int mdio_read(unsigned int addr, int phy_id, int loc)
1da177e4
LT		 771{
772 u_int cmd = (0x06<<10)|(phy_id<<5)|loc;
773 int i, retval = 0, mask = inb(addr) & MDIO_MASK;
774
775 mdio_sync(addr);
776 for (i = 13; i >= 0; i--) {
777 int dat = (cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0;
778 outb(mask | dat, addr);
779 outb(mask | dat | MDIO_SHIFT_CLK, addr);
780 }
781 for (i = 19; i > 0; i--) {
782 outb(mask, addr);
783 retval = (retval << 1) | ((inb(addr) & MDIO_DATA_READ) != 0);
784 outb(mask | MDIO_SHIFT_CLK, addr);
785 }
786 return (retval>>1) & 0xffff;
787}
788
906da809 789static void mdio_write(unsigned int addr, int phy_id, int loc, int value)
1da177e4
LT		 790{
791 u_int cmd = (0x05<<28)|(phy_id<<23)|(loc<<18)|(1<<17)|value;
792 int i, mask = inb(addr) & MDIO_MASK;
793
794 mdio_sync(addr);
795 for (i = 31; i >= 0; i--) {
796 int dat = (cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0;
797 outb(mask | dat, addr);
798 outb(mask | dat | MDIO_SHIFT_CLK, addr);
799 }
800 for (i = 1; i >= 0; i--) {
801 outb(mask, addr);
802 outb(mask | MDIO_SHIFT_CLK, addr);
803 }
804}
805
1da177e4
LT		 806/*======================================================================
807
808 EEPROM access routines for DL10019 and DL10022 based cards
809
810======================================================================*/
811
812#define EE_EEP 0x40
813#define EE_ASIC 0x10
814#define EE_CS 0x08
815#define EE_CK 0x04
816#define EE_DO 0x02
817#define EE_DI 0x01
818#define EE_ADOT 0x01 /* DataOut for ASIC */
819#define EE_READ_CMD 0x06
820
821#define DL19FDUPLX 0x0400 /* DL10019 Full duplex mode */
822
906da809 823static int read_eeprom(unsigned int ioaddr, int location)
1da177e4
LT		 824{
825 int i, retval = 0;
906da809 826 unsigned int ee_addr = ioaddr + DLINK_EEPROM;
1da177e4
LT		 827 int read_cmd = location | (EE_READ_CMD << 8);
828
829 outb(0, ee_addr);
830 outb(EE_EEP|EE_CS, ee_addr);
831
832 /* Shift the read command bits out. */
833 for (i = 10; i >= 0; i--) {
834 short dataval = (read_cmd & (1 << i)) ? EE_DO : 0;
835 outb_p(EE_EEP|EE_CS|dataval, ee_addr);
836 outb_p(EE_EEP|EE_CS|dataval|EE_CK, ee_addr);
837 }
838 outb(EE_EEP|EE_CS, ee_addr);
839
840 for (i = 16; i > 0; i--) {
841 outb_p(EE_EEP|EE_CS | EE_CK, ee_addr);
842 retval = (retval << 1) | ((inb(ee_addr) & EE_DI) ? 1 : 0);
843 outb_p(EE_EEP|EE_CS, ee_addr);
844 }
845
846 /* Terminate the EEPROM access. */
847 outb(0, ee_addr);
848 return retval;
849}
850
851/*
852 The internal ASIC registers can be changed by EEPROM READ access
853 with EE_ASIC bit set.
854 In ASIC mode, EE_ADOT is used to output the data to the ASIC.
855*/
856
906da809 857static void write_asic(unsigned int ioaddr, int location, short asic_data)
1da177e4
LT		 858{
859 int i;
906da809 860 unsigned int ee_addr = ioaddr + DLINK_EEPROM;
1da177e4
LT		 861 short dataval;
862 int read_cmd = location | (EE_READ_CMD << 8);
863
864 asic_data |= read_eeprom(ioaddr, location);
865
866 outb(0, ee_addr);
867 outb(EE_ASIC|EE_CS|EE_DI, ee_addr);
868
869 read_cmd = read_cmd >> 1;
870
871 /* Shift the read command bits out. */
872 for (i = 9; i >= 0; i--) {
873 dataval = (read_cmd & (1 << i)) ? EE_DO : 0;
874 outb_p(EE_ASIC|EE_CS|EE_DI|dataval, ee_addr);
875 outb_p(EE_ASIC|EE_CS|EE_DI|dataval|EE_CK, ee_addr);
876 outb_p(EE_ASIC|EE_CS|EE_DI|dataval, ee_addr);
877 }
878 // sync
879 outb(EE_ASIC|EE_CS, ee_addr);
880 outb(EE_ASIC|EE_CS|EE_CK, ee_addr);
881 outb(EE_ASIC|EE_CS, ee_addr);
882
883 for (i = 15; i >= 0; i--) {
884 dataval = (asic_data & (1 << i)) ? EE_ADOT : 0;
885 outb_p(EE_ASIC|EE_CS|dataval, ee_addr);
886 outb_p(EE_ASIC|EE_CS|dataval|EE_CK, ee_addr);
887 outb_p(EE_ASIC|EE_CS|dataval, ee_addr);
888 }
889
890 /* Terminate the ASIC access. */
891 outb(EE_ASIC|EE_DI, ee_addr);
892 outb(EE_ASIC|EE_DI| EE_CK, ee_addr);
893 outb(EE_ASIC|EE_DI, ee_addr);
894
895 outb(0, ee_addr);
896}
897
898/*====================================================================*/
899
900static void set_misc_reg(struct net_device *dev)
901{
906da809 902 unsigned int nic_base = dev->base_addr;
1da177e4
LT		 903 pcnet_dev_t *info = PRIV(dev);
904 u_char tmp;
6ed14254 905
1da177e4
LT		 906 if (info->flags & HAS_MISC_REG) {
907 tmp = inb_p(nic_base + PCNET_MISC) & ~3;
908 if (dev->if_port == 2)
909 tmp |= 1;
910 if (info->flags & USE_BIG_BUF)
911 tmp |= 2;
912 if (info->flags & HAS_IBM_MISC)
913 tmp |= 8;
914 outb_p(tmp, nic_base + PCNET_MISC);
915 }
916 if (info->flags & IS_DL10022) {
917 if (info->flags & HAS_MII) {
fcf194d1
K		 918 /* Advertise 100F, 100H, 10F, 10H */
919 mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 4, 0x01e1);
1da177e4
LT		 920 /* Restart MII autonegotiation */
921 mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 0, 0x0000);
922 mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 0, 0x1200);
923 info->mii_reset = jiffies;
924 } else {
925 outb(full_duplex ? 4 : 0, nic_base + DLINK_DIAG);
926 }
d89a64be
K		 927 } else if (info->flags & IS_DL10019) {
928 /* Advertise 100F, 100H, 10F, 10H */
929 mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 4, 0x01e1);
930 /* Restart MII autonegotiation */
931 mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 0, 0x0000);
932 mdio_write(nic_base + DLINK_GPIO, info->eth_phy, 0, 0x1200);
1da177e4
LT		 933 }
934}
935
936/*====================================================================*/
937
938static void mii_phy_probe(struct net_device *dev)
939{
940 pcnet_dev_t *info = PRIV(dev);
906da809 941 unsigned int mii_addr = dev->base_addr + DLINK_GPIO;
1da177e4
LT		 942 int i;
943 u_int tmp, phyid;
944
945 for (i = 31; i >= 0; i--) {
946 tmp = mdio_read(mii_addr, i, 1);
947 if ((tmp == 0) || (tmp == 0xffff))
948 continue;
949 tmp = mdio_read(mii_addr, i, MII_PHYID_REG1);
950 phyid = tmp << 16;
951 phyid |= mdio_read(mii_addr, i, MII_PHYID_REG2);
952 phyid &= MII_PHYID_REV_MASK;
953 DEBUG(0, "%s: MII at %d is 0x%08x\n", dev->name, i, phyid);
954 if (phyid == AM79C9XX_HOME_PHY) {
955 info->pna_phy = i;
956 } else if (phyid != AM79C9XX_ETH_PHY) {
957 info->eth_phy = i;
958 }
959 }
960}
961
962static int pcnet_open(struct net_device *dev)
963{
59b34c12 964 int ret;
1da177e4 965 pcnet_dev_t *info = PRIV(dev);
fba395ee 966 struct pcmcia_device *link = info->p_dev;
54299ef7 967 unsigned int nic_base = dev->base_addr;
fd238232 968
1da177e4
LT		 969 DEBUG(2, "pcnet_open('%s')\n", dev->name);
970
9940ec36 971 if (!pcmcia_dev_present(link))
1da177e4
LT		 972 return -ENODEV;
973
1da177e4 974 set_misc_reg(dev);
54299ef7
K		 975
976 outb_p(0xFF, nic_base + EN0_ISR); /* Clear bogus intr. */
59b34c12
YY		 977 ret = request_irq(dev->irq, ei_irq_wrapper, IRQF_SHARED, dev_info, dev);
978 if (ret)
979 return ret;
980
981 link->open++;
1da177e4
LT		 982
983 info->phy_id = info->eth_phy;
984 info->link_status = 0x00;
985 init_timer(&info->watchdog);
986 info->watchdog.function = &ei_watchdog;
987 info->watchdog.data = (u_long)dev;
988 info->watchdog.expires = jiffies + HZ;
989 add_timer(&info->watchdog);
990
991 return ei_open(dev);
992} /* pcnet_open */
993
994/*====================================================================*/
995
996static int pcnet_close(struct net_device *dev)
997{
998 pcnet_dev_t *info = PRIV(dev);
fba395ee 999 struct pcmcia_device *link = info->p_dev;
1da177e4
LT		 1000
1001 DEBUG(2, "pcnet_close('%s')\n", dev->name);
1002
1003 ei_close(dev);
1004 free_irq(dev->irq, dev);
6ed14254 1005
1da177e4
LT		 1006 link->open--;
1007 netif_stop_queue(dev);
1008 del_timer_sync(&info->watchdog);
1009
1010 return 0;
1011} /* pcnet_close */
1012
1013/*======================================================================
1014
1015 Hard reset the card. This used to pause for the same period that
1016 a 8390 reset command required, but that shouldn't be necessary.
1017
1018======================================================================*/
1019
1020static void pcnet_reset_8390(struct net_device *dev)
1021{
906da809 1022 unsigned int nic_base = dev->base_addr;
1da177e4
LT		 1023 int i;
1024
1025 ei_status.txing = ei_status.dmaing = 0;
1026
1027 outb_p(E8390_NODMA+E8390_PAGE0+E8390_STOP, nic_base + E8390_CMD);
1028
1029 outb(inb(nic_base + PCNET_RESET), nic_base + PCNET_RESET);
1030
1031 for (i = 0; i < 100; i++) {
1032 if ((inb_p(nic_base+EN0_ISR) & ENISR_RESET) != 0)
1033 break;
1034 udelay(100);
1035 }
1036 outb_p(ENISR_RESET, nic_base + EN0_ISR); /* Ack intr. */
6ed14254 1037
1da177e4
LT		 1038 if (i == 100)
1039 printk(KERN_ERR "%s: pcnet_reset_8390() did not complete.\n",
1040 dev->name);
1041 set_misc_reg(dev);
6ed14254 1042
1da177e4
LT		 1043} /* pcnet_reset_8390 */
1044
1045/*====================================================================*/
1046
1047static int set_config(struct net_device *dev, struct ifmap *map)
1048{
1049 pcnet_dev_t *info = PRIV(dev);
1050 if ((map->port != (u_char)(-1)) && (map->port != dev->if_port)) {
1051 if (!(info->flags & HAS_MISC_REG))
1052 return -EOPNOTSUPP;
1053 else if ((map->port < 1) || (map->port > 2))
1054 return -EINVAL;
1055 dev->if_port = map->port;
1056 printk(KERN_INFO "%s: switched to %s port\n",
1057 dev->name, if_names[dev->if_port]);
1058 NS8390_init(dev, 1);
1059 }
1060 return 0;
1061}
1062
1063/*====================================================================*/
1064
7d12e780 1065static irqreturn_t ei_irq_wrapper(int irq, void *dev_id)
1da177e4
LT		 1066{
1067 struct net_device *dev = dev_id;
93ad4fb0 1068 pcnet_dev_t *info;
7d12e780 1069 irqreturn_t ret = ei_interrupt(irq, dev_id);
1da177e4 1070
93ad4fb0
AM		 1071 if (ret == IRQ_HANDLED) {
1072 info = PRIV(dev);
1da177e4 1073 info->stale = 0;
93ad4fb0 1074 }
1da177e4
LT		 1075 return ret;
1076}
1077
1078static void ei_watchdog(u_long arg)
1079{
1080 struct net_device *dev = (struct net_device *)arg;
1081 pcnet_dev_t *info = PRIV(dev);
906da809
OJ		 1082 unsigned int nic_base = dev->base_addr;
1083 unsigned int mii_addr = nic_base + DLINK_GPIO;
1da177e4
LT		 1084 u_short link;
1085
1086 if (!netif_device_present(dev)) goto reschedule;
1087
1088 /* Check for pending interrupt with expired latency timer: with
1089 this, we can limp along even if the interrupt is blocked */
1da177e4
LT		 1090 if (info->stale++ && (inb_p(nic_base + EN0_ISR) & ENISR_ALL)) {
1091 if (!info->fast_poll)
1092 printk(KERN_INFO "%s: interrupt(s) dropped!\n", dev->name);
7d12e780 1093 ei_irq_wrapper(dev->irq, dev);
1da177e4
LT		 1094 info->fast_poll = HZ;
1095 }
1096 if (info->fast_poll) {
1097 info->fast_poll--;
1098 info->watchdog.expires = jiffies + 1;
1099 add_timer(&info->watchdog);
1100 return;
1101 }
1102
1103 if (!(info->flags & HAS_MII))
1104 goto reschedule;
1105
1106 mdio_read(mii_addr, info->phy_id, 1);
1107 link = mdio_read(mii_addr, info->phy_id, 1);
1108 if (!link || (link == 0xffff)) {
1109 if (info->eth_phy) {
1110 info->phy_id = info->eth_phy = 0;
1111 } else {
1112 printk(KERN_INFO "%s: MII is missing!\n", dev->name);
1113 info->flags &= ~HAS_MII;
1114 }
1115 goto reschedule;
1116 }
1117
1118 link &= 0x0004;
1119 if (link != info->link_status) {
1120 u_short p = mdio_read(mii_addr, info->phy_id, 5);
1121 printk(KERN_INFO "%s: %s link beat\n", dev->name,
1122 (link) ? "found" : "lost");
1123 if (link && (info->flags & IS_DL10022)) {
1124 /* Disable collision detection on full duplex links */
1125 outb((p & 0x0140) ? 4 : 0, nic_base + DLINK_DIAG);
1126 } else if (link && (info->flags & IS_DL10019)) {
1127 /* Disable collision detection on full duplex links */
1128 write_asic(dev->base_addr, 4, (p & 0x140) ? DL19FDUPLX : 0);
1129 }
1130 if (link) {
1131 if (info->phy_id == info->eth_phy) {
1132 if (p)
1133 printk(KERN_INFO "%s: autonegotiation complete: "
1134 "%sbaseT-%cD selected\n", dev->name,
1135 ((p & 0x0180) ? "100" : "10"),
1136 ((p & 0x0140) ? 'F' : 'H'));
1137 else
1138 printk(KERN_INFO "%s: link partner did not "
1139 "autonegotiate\n", dev->name);
1140 }
1141 NS8390_init(dev, 1);
1142 }
1143 info->link_status = link;
1144 }
1145 if (info->pna_phy && time_after(jiffies, info->mii_reset + 6*HZ)) {
1146 link = mdio_read(mii_addr, info->eth_phy, 1) & 0x0004;
1147 if (((info->phy_id == info->pna_phy) && link) ||
1148 ((info->phy_id != info->pna_phy) && !link)) {
1149 /* isolate this MII and try flipping to the other one */
1150 mdio_write(mii_addr, info->phy_id, 0, 0x0400);
1151 info->phy_id ^= info->pna_phy ^ info->eth_phy;
1152 printk(KERN_INFO "%s: switched to %s transceiver\n", dev->name,
1153 (info->phy_id == info->eth_phy) ? "ethernet" : "PNA");
1154 mdio_write(mii_addr, info->phy_id, 0,
1155 (info->phy_id == info->eth_phy) ? 0x1000 : 0);
1156 info->link_status = 0;
1157 info->mii_reset = jiffies;
1158 }
1159 }
1160
1161reschedule:
1162 info->watchdog.expires = jiffies + HZ;
1163 add_timer(&info->watchdog);
1164}
1165
1166/*====================================================================*/
1167
1168static void netdev_get_drvinfo(struct net_device *dev,
1169 struct ethtool_drvinfo *info)
1170{
1171 strcpy(info->driver, "pcnet_cs");
1172}
1173
7282d491 1174static const struct ethtool_ops netdev_ethtool_ops = {
1da177e4
LT		 1175 .get_drvinfo = netdev_get_drvinfo,
1176};
1177
1178/*====================================================================*/
1179
1180
1181static int ei_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
1182{
1183 pcnet_dev_t *info = PRIV(dev);
1184 u16 *data = (u16 *)&rq->ifr_ifru;
906da809 1185 unsigned int mii_addr = dev->base_addr + DLINK_GPIO;
1da177e4
LT		 1186 switch (cmd) {
1187 case SIOCGMIIPHY:
1188 data[0] = info->phy_id;
1189 case SIOCGMIIREG: /* Read MII PHY register. */
1190 data[3] = mdio_read(mii_addr, data[0], data[1] & 0x1f);
1191 return 0;
1192 case SIOCSMIIREG: /* Write MII PHY register. */
1193 if (!capable(CAP_NET_ADMIN))
1194 return -EPERM;
1195 mdio_write(mii_addr, data[0], data[1] & 0x1f, data[2]);
1196 return 0;
1197 }
1198 return -EOPNOTSUPP;
1199}
1200
1201/*====================================================================*/
1202
1203static void dma_get_8390_hdr(struct net_device *dev,
1204 struct e8390_pkt_hdr *hdr,
1205 int ring_page)
1206{
906da809 1207 unsigned int nic_base = dev->base_addr;
1da177e4
LT		 1208
1209 if (ei_status.dmaing) {
1210 printk(KERN_NOTICE "%s: DMAing conflict in dma_block_input."
1211 "[DMAstat:%1x][irqlock:%1x]\n",
1212 dev->name, ei_status.dmaing, ei_status.irqlock);
1213 return;
1214 }
6ed14254 1215
1da177e4
LT		 1216 ei_status.dmaing |= 0x01;
1217 outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base + PCNET_CMD);
1218 outb_p(sizeof(struct e8390_pkt_hdr), nic_base + EN0_RCNTLO);
1219 outb_p(0, nic_base + EN0_RCNTHI);
1220 outb_p(0, nic_base + EN0_RSARLO); /* On page boundary */
1221 outb_p(ring_page, nic_base + EN0_RSARHI);
1222 outb_p(E8390_RREAD+E8390_START, nic_base + PCNET_CMD);
1223
1224 insw(nic_base + PCNET_DATAPORT, hdr,
1225 sizeof(struct e8390_pkt_hdr)>>1);
1226 /* Fix for big endian systems */
1227 hdr->count = le16_to_cpu(hdr->count);
1228
1229 outb_p(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */
1230 ei_status.dmaing &= ~0x01;
1231}
1232
1233/*====================================================================*/
1234
1235static void dma_block_input(struct net_device *dev, int count,
1236 struct sk_buff *skb, int ring_offset)
1237{
906da809 1238 unsigned int nic_base = dev->base_addr;
1da177e4
LT		 1239 int xfer_count = count;
1240 char *buf = skb->data;
1241
1242#ifdef PCMCIA_DEBUG
1243 if ((ei_debug > 4) && (count != 4))
1244 printk(KERN_DEBUG "%s: [bi=%d]\n", dev->name, count+4);
1245#endif
1246 if (ei_status.dmaing) {
1247 printk(KERN_NOTICE "%s: DMAing conflict in dma_block_input."
1248 "[DMAstat:%1x][irqlock:%1x]\n",
1249 dev->name, ei_status.dmaing, ei_status.irqlock);
1250 return;
1251 }
1252 ei_status.dmaing |= 0x01;
1253 outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base + PCNET_CMD);
1254 outb_p(count & 0xff, nic_base + EN0_RCNTLO);
1255 outb_p(count >> 8, nic_base + EN0_RCNTHI);
1256 outb_p(ring_offset & 0xff, nic_base + EN0_RSARLO);
1257 outb_p(ring_offset >> 8, nic_base + EN0_RSARHI);
1258 outb_p(E8390_RREAD+E8390_START, nic_base + PCNET_CMD);
1259
1260 insw(nic_base + PCNET_DATAPORT,buf,count>>1);
1261 if (count & 0x01)
1262 buf[count-1] = inb(nic_base + PCNET_DATAPORT), xfer_count++;
1263
93ad4fb0 1264 /* This was for the ALPHA version only, but enough people have been
1da177e4
LT		 1265 encountering problems that it is still here. */
1266#ifdef PCMCIA_DEBUG
1267 if (ei_debug > 4) { /* DMA termination address check... */
1268 int addr, tries = 20;
1269 do {
1270 /* DON'T check for 'inb_p(EN0_ISR) & ENISR_RDC' here
1271 -- it's broken for Rx on some cards! */
1272 int high = inb_p(nic_base + EN0_RSARHI);
1273 int low = inb_p(nic_base + EN0_RSARLO);
1274 addr = (high << 8) + low;
1275 if (((ring_offset + xfer_count) & 0xff) == (addr & 0xff))
1276 break;
1277 } while (--tries > 0);
1278 if (tries <= 0)
1279 printk(KERN_NOTICE "%s: RX transfer address mismatch,"
1280 "%#4.4x (expected) vs. %#4.4x (actual).\n",
1281 dev->name, ring_offset + xfer_count, addr);
1282 }
1283#endif
1284 outb_p(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */
1285 ei_status.dmaing &= ~0x01;
1286} /* dma_block_input */
1287
1288/*====================================================================*/
1289
1290static void dma_block_output(struct net_device *dev, int count,
1291 const u_char *buf, const int start_page)
1292{
906da809 1293 unsigned int nic_base = dev->base_addr;
1da177e4
LT		 1294 pcnet_dev_t *info = PRIV(dev);
1295#ifdef PCMCIA_DEBUG
1296 int retries = 0;
1297#endif
1298 u_long dma_start;
1299
1300#ifdef PCMCIA_DEBUG
1301 if (ei_debug > 4)
1302 printk(KERN_DEBUG "%s: [bo=%d]\n", dev->name, count);
1303#endif
1304
1305 /* Round the count up for word writes. Do we need to do this?
1306 What effect will an odd byte count have on the 8390?
1307 I should check someday. */
1308 if (count & 0x01)
1309 count++;
1310 if (ei_status.dmaing) {
1311 printk(KERN_NOTICE "%s: DMAing conflict in dma_block_output."
1312 "[DMAstat:%1x][irqlock:%1x]\n",
1313 dev->name, ei_status.dmaing, ei_status.irqlock);
1314 return;
1315 }
1316 ei_status.dmaing |= 0x01;
1317 /* We should already be in page 0, but to be safe... */
1318 outb_p(E8390_PAGE0+E8390_START+E8390_NODMA, nic_base+PCNET_CMD);
1319
1320#ifdef PCMCIA_DEBUG
1321 retry:
1322#endif
1323
1324 outb_p(ENISR_RDC, nic_base + EN0_ISR);
1325
1326 /* Now the normal output. */
1327 outb_p(count & 0xff, nic_base + EN0_RCNTLO);
1328 outb_p(count >> 8, nic_base + EN0_RCNTHI);
1329 outb_p(0x00, nic_base + EN0_RSARLO);
1330 outb_p(start_page, nic_base + EN0_RSARHI);
1331
1332 outb_p(E8390_RWRITE+E8390_START, nic_base + PCNET_CMD);
1333 outsw(nic_base + PCNET_DATAPORT, buf, count>>1);
1334
1335 dma_start = jiffies;
1336
1337#ifdef PCMCIA_DEBUG
93ad4fb0 1338 /* This was for the ALPHA version only, but enough people have been
1da177e4
LT		 1339 encountering problems that it is still here. */
1340 if (ei_debug > 4) { /* DMA termination address check... */
1341 int addr, tries = 20;
1342 do {
1343 int high = inb_p(nic_base + EN0_RSARHI);
1344 int low = inb_p(nic_base + EN0_RSARLO);
1345 addr = (high << 8) + low;
1346 if ((start_page << 8) + count == addr)
1347 break;
1348 } while (--tries > 0);
1349 if (tries <= 0) {
1350 printk(KERN_NOTICE "%s: Tx packet transfer address mismatch,"
1351 "%#4.4x (expected) vs. %#4.4x (actual).\n",
1352 dev->name, (start_page << 8) + count, addr);
1353 if (retries++ == 0)
1354 goto retry;
1355 }
1356 }
1357#endif
1358
1359 while ((inb_p(nic_base + EN0_ISR) & ENISR_RDC) == 0)
1360 if (time_after(jiffies, dma_start + PCNET_RDC_TIMEOUT)) {
1361 printk(KERN_NOTICE "%s: timeout waiting for Tx RDC.\n",
1362 dev->name);
1363 pcnet_reset_8390(dev);
1364 NS8390_init(dev, 1);
1365 break;
1366 }
1367
1368 outb_p(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */
1369 if (info->flags & DELAY_OUTPUT)
1370 udelay((long)delay_time);
1371 ei_status.dmaing &= ~0x01;
1372}
1373
1374/*====================================================================*/
1375
fba395ee 1376static int setup_dma_config(struct pcmcia_device *link, int start_pg,
1da177e4
LT		 1377 int stop_pg)
1378{
1379 struct net_device *dev = link->priv;
1380
1381 ei_status.tx_start_page = start_pg;
1382 ei_status.rx_start_page = start_pg + TX_PAGES;
1383 ei_status.stop_page = stop_pg;
1384
1385 /* set up block i/o functions */
1386 ei_status.get_8390_hdr = &dma_get_8390_hdr;
1387 ei_status.block_input = &dma_block_input;
1388 ei_status.block_output = &dma_block_output;
1389
1390 return 0;
1391}
1392
1393/*====================================================================*/
1394
1395static void copyin(void *dest, void __iomem *src, int c)
1396{
1397 u_short *d = dest;
1398 u_short __iomem *s = src;
1399 int odd;
1400
1401 if (c <= 0)
1402 return;
1403 odd = (c & 1); c >>= 1;
1404
1405 if (c) {
1406 do { *d++ = __raw_readw(s++); } while (--c);
1407 }
1408 /* get last byte by fetching a word and masking */
1409 if (odd)
1410 *((u_char *)d) = readw(s) & 0xff;
1411}
1412
1413static void copyout(void __iomem *dest, const void *src, int c)
1414{
1415 u_short __iomem *d = dest;
1416 const u_short *s = src;
1417 int odd;
1418
1419 if (c <= 0)
1420 return;
1421 odd = (c & 1); c >>= 1;
1422
1423 if (c) {
1424 do { __raw_writew(*s++, d++); } while (--c);
1425 }
1426 /* copy last byte doing a read-modify-write */
1427 if (odd)
1428 writew((readw(d) & 0xff00) | *(u_char *)s, d);
1429}
1430
1431/*====================================================================*/
1432
1433static void shmem_get_8390_hdr(struct net_device *dev,
1434 struct e8390_pkt_hdr *hdr,
1435 int ring_page)
1436{
1437 void __iomem *xfer_start = ei_status.mem + (TX_PAGES<<8)
1438 + (ring_page << 8)
1439 - (ei_status.rx_start_page << 8);
6ed14254 1440
1da177e4
LT		 1441 copyin(hdr, xfer_start, sizeof(struct e8390_pkt_hdr));
1442 /* Fix for big endian systems */
1443 hdr->count = le16_to_cpu(hdr->count);
1444}
1445
1446/*====================================================================*/
1447
1448static void shmem_block_input(struct net_device *dev, int count,
1449 struct sk_buff *skb, int ring_offset)
1450{
99417769
AV		 1451 void __iomem *base = ei_status.mem;
1452 unsigned long offset = (TX_PAGES<<8) + ring_offset
1da177e4
LT		 1453 - (ei_status.rx_start_page << 8);
1454 char *buf = skb->data;
6ed14254 1455
99417769 1456 if (offset + count > ei_status.priv) {
1da177e4 1457 /* We must wrap the input move. */
99417769
AV		 1458 int semi_count = ei_status.priv - offset;
1459 copyin(buf, base + offset, semi_count);
1da177e4 1460 buf += semi_count;
99417769 1461 offset = TX_PAGES<<8;
1da177e4
LT		 1462 count -= semi_count;
1463 }
99417769 1464 copyin(buf, base + offset, count);
1da177e4
LT		 1465}
1466
1467/*====================================================================*/
1468
1469static void shmem_block_output(struct net_device *dev, int count,
1470 const u_char *buf, const int start_page)
1471{
1472 void __iomem *shmem = ei_status.mem + (start_page << 8);
1473 shmem -= ei_status.tx_start_page << 8;
1474 copyout(shmem, buf, count);
1475}
1476
1477/*====================================================================*/
1478
fba395ee 1479static int setup_shmem_window(struct pcmcia_device *link, int start_pg,
1da177e4
LT		 1480 int stop_pg, int cm_offset)
1481{
1482 struct net_device *dev = link->priv;
1483 pcnet_dev_t *info = PRIV(dev);
1484 win_req_t req;
1485 memreq_t mem;
1486 int i, window_size, offset, last_ret, last_fn;
1487
1488 window_size = (stop_pg - start_pg) << 8;
1489 if (window_size > 32 * 1024)
1490 window_size = 32 * 1024;
1491
1492 /* Make sure it's a power of two. */
9329f4e4 1493 window_size = roundup_pow_of_two(window_size);
1da177e4
LT		 1494
1495 /* Allocate a memory window */
1496 req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE;
1497 req.Attributes |= WIN_USE_WAIT;
1498 req.Base = 0; req.Size = window_size;
1499 req.AccessSpeed = mem_speed;
fba395ee 1500 CS_CHECK(RequestWindow, pcmcia_request_window(&link, &req, &link->win));
1da177e4
LT		 1501
1502 mem.CardOffset = (start_pg << 8) + cm_offset;
1503 offset = mem.CardOffset % window_size;
1504 mem.CardOffset -= offset;
1505 mem.Page = 0;
1506 CS_CHECK(MapMemPage, pcmcia_map_mem_page(link->win, &mem));
1507
1508 /* Try scribbling on the buffer */
1509 info->base = ioremap(req.Base, window_size);
1510 for (i = 0; i < (TX_PAGES<<8); i += 2)
1511 __raw_writew((i>>1), info->base+offset+i);
1512 udelay(100);
1513 for (i = 0; i < (TX_PAGES<<8); i += 2)
1514 if (__raw_readw(info->base+offset+i) != (i>>1)) break;
1515 pcnet_reset_8390(dev);
1516 if (i != (TX_PAGES<<8)) {
1517 iounmap(info->base);
1518 pcmcia_release_window(link->win);
1519 info->base = NULL; link->win = NULL;
1520 goto failed;
1521 }
6ed14254 1522
1da177e4 1523 ei_status.mem = info->base + offset;
99417769 1524 ei_status.priv = req.Size;
1da177e4 1525 dev->mem_start = (u_long)ei_status.mem;
99417769 1526 dev->mem_end = dev->mem_start + req.Size;
1da177e4
LT		 1527
1528 ei_status.tx_start_page = start_pg;
1529 ei_status.rx_start_page = start_pg + TX_PAGES;
1530 ei_status.stop_page = start_pg + ((req.Size - offset) >> 8);
1531
1532 /* set up block i/o functions */
1533 ei_status.get_8390_hdr = &shmem_get_8390_hdr;
1534 ei_status.block_input = &shmem_block_input;
1535 ei_status.block_output = &shmem_block_output;
1536
1537 info->flags |= USE_SHMEM;
1538 return 0;
1539
1540cs_failed:
fba395ee 1541 cs_error(link, last_fn, last_ret);
1da177e4
LT		 1542failed:
1543 return 1;
1544}
1545
1546/*====================================================================*/
1547
ce8a0037
DB		 1548static struct pcmcia_device_id pcnet_ids[] = {
1549 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0057, 0x0021),
1550 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0104, 0x000a),
1551 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0105, 0xea15),
1552 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0143, 0x3341),
1553 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0143, 0xc0ab),
1554 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x021b, 0x0101),
1555 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x08a1, 0xc0ab),
d277ad0e 1556 PCMCIA_PFC_DEVICE_PROD_ID12(0, "AnyCom", "Fast Ethernet + 56K COMBO", 0x578ba6e7, 0xb0ac62c4),
ce8a0037
DB		 1557 PCMCIA_PFC_DEVICE_PROD_ID12(0, "D-Link", "DME336T", 0x1a424a1c, 0xb23897ff),
1558 PCMCIA_PFC_DEVICE_PROD_ID12(0, "Grey Cell", "GCS3000", 0x2a151fac, 0x48b932ae),
1559 PCMCIA_PFC_DEVICE_PROD_ID12(0, "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)", 0x0733cc81, 0xb3765033),
1560 PCMCIA_PFC_DEVICE_PROD_ID12(0, "LINKSYS", "PCMLM336", 0xf7cb0b07, 0x7a821b58),
40738f3f 1561 PCMCIA_PFC_DEVICE_PROD_ID12(0, "MICRO RESEARCH", "COMBO-L/M-336", 0xb2ced065, 0x3ced0555),
ce8a0037
DB		 1562 PCMCIA_PFC_DEVICE_PROD_ID12(0, "PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc),
1563 PCMCIA_PFC_DEVICE_PROD_ID12(0, "PCMCIAs", "LanModem", 0xdcfe12d3, 0xc67c648f),
1564 PCMCIA_MFC_DEVICE_PROD_ID12(0, "IBM", "Home and Away 28.8 PC Card ", 0xb569a6e5, 0x5bd4ff2c),
1565 PCMCIA_MFC_DEVICE_PROD_ID12(0, "IBM", "Home and Away Credit Card Adapter", 0xb569a6e5, 0x4bdf15c3),
1566 PCMCIA_MFC_DEVICE_PROD_ID12(0, "IBM", "w95 Home and Away Credit Card ", 0xb569a6e5, 0xae911c15),
1567 PCMCIA_MFC_DEVICE_PROD_ID123(0, "APEX DATA", "MULTICARD", "ETHERNET-MODEM", 0x11c2da09, 0x7289dc5d, 0xaad95e1f),
1568 PCMCIA_MFC_DEVICE_PROD_ID2(0, "FAX/Modem/Ethernet Combo Card ", 0x1ed59302),
1569 PCMCIA_DEVICE_MANF_CARD(0x0057, 0x1004),
1570 PCMCIA_DEVICE_MANF_CARD(0x0104, 0x000d),
1571 PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0075),
1572 PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0145),
1573 PCMCIA_DEVICE_MANF_CARD(0x0149, 0x0230),
1574 PCMCIA_DEVICE_MANF_CARD(0x0149, 0x4530),
61da96be 1575 PCMCIA_DEVICE_MANF_CARD(0x0149, 0xc1ab),
ce8a0037
DB		 1576 PCMCIA_DEVICE_MANF_CARD(0x0186, 0x0110),
1577 PCMCIA_DEVICE_MANF_CARD(0x01bf, 0x2328),
1578 PCMCIA_DEVICE_MANF_CARD(0x01bf, 0x8041),
1579 PCMCIA_DEVICE_MANF_CARD(0x0213, 0x2452),
ce8a0037
DB		 1580 PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0300),
1581 PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0307),
1582 PCMCIA_DEVICE_MANF_CARD(0x026f, 0x030a),
1583 PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1103),
1584 PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1121),
1585 PCMCIA_DEVICE_PROD_ID12("2408LAN", "Ethernet", 0x352fff7f, 0x00b2e941),
654e0220 1586 PCMCIA_DEVICE_PROD_ID1234("Socket", "CF 10/100 Ethernet Card", "Revision B", "05/11/06", 0xb38bcc2e, 0x4de88352, 0xeaca6c8d, 0x7e57c22e),
ce8a0037
DB		 1587 PCMCIA_DEVICE_PROD_ID123("Cardwell", "PCMCIA", "ETHERNET", 0x9533672e, 0x281f1c5d, 0x3ff7175b),
1588 PCMCIA_DEVICE_PROD_ID123("CNet ", "CN30BC", "ETHERNET", 0x9fe55d3d, 0x85601198, 0x3ff7175b),
1589 PCMCIA_DEVICE_PROD_ID123("Digital", "Ethernet", "Adapter", 0x9999ab35, 0x00b2e941, 0x4b0d829e),
1590 PCMCIA_DEVICE_PROD_ID123("Edimax Technology Inc.", "PCMCIA", "Ethernet Card", 0x738a0019, 0x281f1c5d, 0x5e9d92c0),
1591 PCMCIA_DEVICE_PROD_ID123("EFA ", "EFA207", "ETHERNET", 0x3d294be4, 0xeb9aab6c, 0x3ff7175b),
1592 PCMCIA_DEVICE_PROD_ID123("I-O DATA", "PCLA", "ETHERNET", 0x1d55d7ec, 0xe4c64d34, 0x3ff7175b),
1593 PCMCIA_DEVICE_PROD_ID123("IO DATA", "PCLATE", "ETHERNET", 0x547e66dc, 0x6b260753, 0x3ff7175b),
1594 PCMCIA_DEVICE_PROD_ID123("KingMax Technology Inc.", "EN10-T2", "PCMCIA Ethernet Card", 0x932b7189, 0x699e4436, 0x6f6652e0),
1595 PCMCIA_DEVICE_PROD_ID123("PCMCIA", "PCMCIA-ETHERNET-CARD", "UE2216", 0x281f1c5d, 0xd4cd2f20, 0xb87add82),
1596 PCMCIA_DEVICE_PROD_ID123("PCMCIA", "PCMCIA-ETHERNET-CARD", "UE2620", 0x281f1c5d, 0xd4cd2f20, 0x7d3d83a8),
1597 PCMCIA_DEVICE_PROD_ID1("2412LAN", 0x67f236ab),
1598 PCMCIA_DEVICE_PROD_ID12("ACCTON", "EN2212", 0xdfc6b5b2, 0xcb112a11),
1599 PCMCIA_DEVICE_PROD_ID12("ACCTON", "EN2216-PCMCIA-ETHERNET", 0xdfc6b5b2, 0x5542bfff),
1600 PCMCIA_DEVICE_PROD_ID12("Allied Telesis, K.K.", "CentreCOM LA100-PCM-T V2 100/10M LAN PC Card", 0xbb7fbdd7, 0xcd91cc68),
ce8a0037 1601 PCMCIA_DEVICE_PROD_ID12("Allied Telesis K.K.", "LA100-PCM V2", 0x36634a66, 0xc6d05997),
9c7046cd
JK		 1602 PCMCIA_DEVICE_PROD_ID12("Allied Telesis, K.K.", "CentreCOM LA-PCM_V2", 0xbb7fBdd7, 0x28e299f8),
1603 PCMCIA_DEVICE_PROD_ID12("Allied Telesis K.K.", "LA-PCM V3", 0x36634a66, 0x62241d96),
ce8a0037
DB		 1604 PCMCIA_DEVICE_PROD_ID12("AmbiCom", "AMB8010", 0x5070a7f9, 0x82f96e96),
1605 PCMCIA_DEVICE_PROD_ID12("AmbiCom", "AMB8610", 0x5070a7f9, 0x86741224),
1606 PCMCIA_DEVICE_PROD_ID12("AmbiCom Inc", "AMB8002", 0x93b15570, 0x75ec3efb),
1607 PCMCIA_DEVICE_PROD_ID12("AmbiCom Inc", "AMB8002T", 0x93b15570, 0x461c5247),
1608 PCMCIA_DEVICE_PROD_ID12("AmbiCom Inc", "AMB8010", 0x93b15570, 0x82f96e96),
1609 PCMCIA_DEVICE_PROD_ID12("AnyCom", "ECO Ethernet", 0x578ba6e7, 0x0a9888c1),
1610 PCMCIA_DEVICE_PROD_ID12("AnyCom", "ECO Ethernet 10/100", 0x578ba6e7, 0x939fedbd),
1611 PCMCIA_DEVICE_PROD_ID12("AROWANA", "PCMCIA Ethernet LAN Card", 0x313adbc8, 0x08d9f190),
1612 PCMCIA_DEVICE_PROD_ID12("ASANTE", "FriendlyNet PC Card", 0x3a7ade0f, 0x41c64504),
1613 PCMCIA_DEVICE_PROD_ID12("Billionton", "LNT-10TB", 0x552ab682, 0xeeb1ba6a),
1614 PCMCIA_DEVICE_PROD_ID12("CF", "10Base-Ethernet", 0x44ebf863, 0x93ae4d79),
1615 PCMCIA_DEVICE_PROD_ID12("CNet", "CN40BC Ethernet", 0xbc477dde, 0xfba775a7),
1616 PCMCIA_DEVICE_PROD_ID12("COMPU-SHACK", "BASEline PCMCIA 10 MBit Ethernetadapter", 0xfa2e424d, 0xe9190d8a),
1617 PCMCIA_DEVICE_PROD_ID12("COMPU-SHACK", "FASTline PCMCIA 10/100 Fast-Ethernet", 0xfa2e424d, 0x3953d9b9),
1618 PCMCIA_DEVICE_PROD_ID12("CONTEC", "C-NET(PC)C-10L", 0x21cab552, 0xf6f90722),
1619 PCMCIA_DEVICE_PROD_ID12("corega", "FEther PCC-TXF", 0x0a21501a, 0xa51564a2),
1620 PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega EtherII PCC-T", 0x5261440f, 0xfa9d85bd),
65427298 1621 PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega EtherII PCC-TD", 0x5261440f, 0xc49bd73d),
ce8a0037
DB		 1622 PCMCIA_DEVICE_PROD_ID12("Corega K.K.", "corega EtherII PCC-TD", 0xd4fdcbd8, 0xc49bd73d),
1623 PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega Ether PCC-T", 0x5261440f, 0x6705fcaa),
1624 PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega FastEther PCC-TX", 0x5261440f, 0x485e85d9),
1625 PCMCIA_DEVICE_PROD_ID12("Corega,K.K.", "Ethernet LAN Card", 0x110d26d9, 0x9fd2f0a2),
1626 PCMCIA_DEVICE_PROD_ID12("corega,K.K.", "Ethernet LAN Card", 0x9791a90e, 0x9fd2f0a2),
77aab8bf 1627 PCMCIA_DEVICE_PROD_ID12("corega K.K.", "(CG-LAPCCTXD)", 0x5261440f, 0x73ec0d88),
ce8a0037
DB		 1628 PCMCIA_DEVICE_PROD_ID12("CouplerlessPCMCIA", "100BASE", 0xee5af0ad, 0x7c2add04),
1629 PCMCIA_DEVICE_PROD_ID12("CyQ've", "ELA-010", 0x77008979, 0x9d8d445d),
1630 PCMCIA_DEVICE_PROD_ID12("CyQ've", "ELA-110E 10/100M LAN Card", 0x77008979, 0xfd184814),
1631 PCMCIA_DEVICE_PROD_ID12("DataTrek.", "NetCard ", 0x5cd66d9d, 0x84697ce0),
1632 PCMCIA_DEVICE_PROD_ID12("Dayna Communications, Inc.", "CommuniCard E", 0x0c629325, 0xb4e7dbaf),
1633 PCMCIA_DEVICE_PROD_ID12("Digicom", "Palladio LAN 10/100", 0x697403d8, 0xe160b995),
1634 PCMCIA_DEVICE_PROD_ID12("Digicom", "Palladio LAN 10/100 Dongless", 0x697403d8, 0xa6d3b233),
1635 PCMCIA_DEVICE_PROD_ID12("DIGITAL", "DEPCM-XX", 0x69616cb3, 0xe600e76e),
1636 PCMCIA_DEVICE_PROD_ID12("D-Link", "DE-650", 0x1a424a1c, 0xf28c8398),
1637 PCMCIA_DEVICE_PROD_ID12("D-Link", "DE-660", 0x1a424a1c, 0xd9a1d05b),
d277ad0e 1638 PCMCIA_DEVICE_PROD_ID12("D-Link", "DE-660+", 0x1a424a1c, 0x50dcd0ec),
ce8a0037
DB		 1639 PCMCIA_DEVICE_PROD_ID12("D-Link", "DFE-650", 0x1a424a1c, 0x0f0073f9),
1640 PCMCIA_DEVICE_PROD_ID12("Dual Speed", "10/100 PC Card", 0x725b842d, 0xf1efee84),
1641 PCMCIA_DEVICE_PROD_ID12("Dual Speed", "10/100 Port Attached PC Card", 0x725b842d, 0x2db1f8e9),
1642 PCMCIA_DEVICE_PROD_ID12("Dynalink", "L10BC", 0x55632fd5, 0xdc65f2b1),
1643 PCMCIA_DEVICE_PROD_ID12("DYNALINK", "L10BC", 0x6a26d1cf, 0xdc65f2b1),
1644 PCMCIA_DEVICE_PROD_ID12("DYNALINK", "L10C", 0x6a26d1cf, 0xc4f84efb),
1645 PCMCIA_DEVICE_PROD_ID12("E-CARD", "E-CARD", 0x6701da11, 0x6701da11),
1646 PCMCIA_DEVICE_PROD_ID12("EIGER Labs Inc.", "Ethernet 10BaseT card", 0x53c864c6, 0xedd059f6),
1647 PCMCIA_DEVICE_PROD_ID12("EIGER Labs Inc.", "Ethernet Combo card", 0x53c864c6, 0x929c486c),
1648 PCMCIA_DEVICE_PROD_ID12("Ethernet", "Adapter", 0x00b2e941, 0x4b0d829e),
1649 PCMCIA_DEVICE_PROD_ID12("Ethernet Adapter", "E2000 PCMCIA Ethernet", 0x96767301, 0x71fbbc61),
1650 PCMCIA_DEVICE_PROD_ID12("Ethernet PCMCIA adapter", "EP-210", 0x8dd86181, 0xf2b52517),
1651 PCMCIA_DEVICE_PROD_ID12("Fast Ethernet", "Adapter", 0xb4be14e3, 0x4b0d829e),
1652 PCMCIA_DEVICE_PROD_ID12("Grey Cell", "GCS2000", 0x2a151fac, 0xf00555cb),
1653 PCMCIA_DEVICE_PROD_ID12("Grey Cell", "GCS2220", 0x2a151fac, 0xc1b7e327),
1654 PCMCIA_DEVICE_PROD_ID12("GVC", "NIC-2000p", 0x76e171bd, 0x6eb1c947),
1655 PCMCIA_DEVICE_PROD_ID12("IBM Corp.", "Ethernet", 0xe3736c88, 0x00b2e941),
1656 PCMCIA_DEVICE_PROD_ID12("IC-CARD", "IC-CARD", 0x60cb09a6, 0x60cb09a6),
d277ad0e 1657 PCMCIA_DEVICE_PROD_ID12("IC-CARD+", "IC-CARD+", 0x93693494, 0x93693494),
ce8a0037
DB		 1658 PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCETTX", 0x547e66dc, 0x6fc5459b),
1659 PCMCIA_DEVICE_PROD_ID12("iPort", "10/100 Ethernet Card", 0x56c538d2, 0x11b0ffc0),
1660 PCMCIA_DEVICE_PROD_ID12("KANSAI ELECTRIC CO.,LTD", "KLA-PCM/T", 0xb18dc3b4, 0xcc51a956),
1661 PCMCIA_DEVICE_PROD_ID12("KCI", "PE520 PCMCIA Ethernet Adapter", 0xa89b87d3, 0x1eb88e64),
1662 PCMCIA_DEVICE_PROD_ID12("KINGMAX", "EN10T2T", 0x7bcb459a, 0xa5c81fa5),
1663 PCMCIA_DEVICE_PROD_ID12("Kingston", "KNE-PC2", 0x1128e633, 0xce2a89b3),
1664 PCMCIA_DEVICE_PROD_ID12("Kingston Technology Corp.", "EtheRx PC Card Ethernet Adapter", 0x313c7be3, 0x0afb54a2),
1665 PCMCIA_DEVICE_PROD_ID12("Laneed", "LD-10/100CD", 0x1b7827b2, 0xcda71d1c),
1666 PCMCIA_DEVICE_PROD_ID12("Laneed", "LD-CDF", 0x1b7827b2, 0xfec71e40),
1667 PCMCIA_DEVICE_PROD_ID12("Laneed", "LD-CDL/T", 0x1b7827b2, 0x79fba4f7),
9c7046cd 1668 PCMCIA_DEVICE_PROD_ID12("Laneed", "LD-CDS", 0x1b7827b2, 0x931afaab),
dad8c737 1669 PCMCIA_DEVICE_PROD_ID12("LEMEL", "LM-N89TX PRO", 0xbbefb52f, 0xd2897a97),
ce8a0037
DB		 1670 PCMCIA_DEVICE_PROD_ID12("Linksys", "Combo PCMCIA EthernetCard (EC2T)", 0x0733cc81, 0x32ee8c78),
1671 PCMCIA_DEVICE_PROD_ID12("LINKSYS", "E-CARD", 0xf7cb0b07, 0x6701da11),
1672 PCMCIA_DEVICE_PROD_ID12("Linksys", "EtherFast 10/100 Integrated PC Card (PCM100)", 0x0733cc81, 0x453c3f9d),
1673 PCMCIA_DEVICE_PROD_ID12("Linksys", "EtherFast 10/100 PC Card (PCMPC100)", 0x0733cc81, 0x66c5a389),
1674 PCMCIA_DEVICE_PROD_ID12("Linksys", "EtherFast 10/100 PC Card (PCMPC100 V2)", 0x0733cc81, 0x3a3b28e9),
d277ad0e 1675 PCMCIA_DEVICE_PROD_ID12("Linksys", "HomeLink Phoneline + 10/100 Network PC Card (PCM100H1)", 0x733cc81, 0x7a3e5c3a),
ce8a0037 1676 PCMCIA_DEVICE_PROD_ID12("Logitec", "LPM-LN100TX", 0x88fcdeda, 0x6d772737),
c96a34ec 1677 PCMCIA_DEVICE_PROD_ID12("Logitec", "LPM-LN100TE", 0x88fcdeda, 0x0e714bee),
ce8a0037 1678 PCMCIA_DEVICE_PROD_ID12("Logitec", "LPM-LN20T", 0x88fcdeda, 0x81090922),
77aab8bf 1679 PCMCIA_DEVICE_PROD_ID12("Logitec", "LPM-LN10TE", 0x88fcdeda, 0xc1e2521c),
ce8a0037
DB		 1680 PCMCIA_DEVICE_PROD_ID12("LONGSHINE", "PCMCIA Ethernet Card", 0xf866b0b0, 0x6f6652e0),
1681 PCMCIA_DEVICE_PROD_ID12("MACNICA", "ME1-JEIDA", 0x20841b68, 0xaf8a3578),
1682 PCMCIA_DEVICE_PROD_ID12("Macsense", "MPC-10", 0xd830297f, 0xd265c307),
1683 PCMCIA_DEVICE_PROD_ID12("Matsushita Electric Industrial Co.,LTD.", "CF-VEL211", 0x44445376, 0x8ded41d4),
1684 PCMCIA_DEVICE_PROD_ID12("MAXTECH", "PCN2000", 0x78d64bc0, 0xca0ca4b8),
1685 PCMCIA_DEVICE_PROD_ID12("MELCO", "LPC2-T", 0x481e0094, 0xa2eb0cf3),
1686 PCMCIA_DEVICE_PROD_ID12("MELCO", "LPC2-TX", 0x481e0094, 0x41a6916c),
1687 PCMCIA_DEVICE_PROD_ID12("Microcom C.E.", "Travel Card LAN 10/100", 0x4b91cec7, 0xe70220d6),
1688 PCMCIA_DEVICE_PROD_ID12("Microdyne", "NE4200", 0x2e6da59b, 0x0478e472),
1689 PCMCIA_DEVICE_PROD_ID12("MIDORI ELEC.", "LT-PCMT", 0x648d55c1, 0xbde526c7),
1690 PCMCIA_DEVICE_PROD_ID12("National Semiconductor", "InfoMover 4100", 0x36e1191f, 0x60c229b9),
1691 PCMCIA_DEVICE_PROD_ID12("National Semiconductor", "InfoMover NE4100", 0x36e1191f, 0xa6617ec8),
1692 PCMCIA_DEVICE_PROD_ID12("NEC", "PC-9801N-J12", 0x18df0ba0, 0xbc912d76),
1693 PCMCIA_DEVICE_PROD_ID12("NETGEAR", "FA410TX", 0x9aa79dc3, 0x60e5bc0e),
1694 PCMCIA_DEVICE_PROD_ID12("NETGEAR", "FA411", 0x9aa79dc3, 0x40fad875),
1695 PCMCIA_DEVICE_PROD_ID12("Network Everywhere", "Fast Ethernet 10/100 PC Card", 0x820a67b6, 0x31ed1a5f),
9c7046cd 1696 PCMCIA_DEVICE_PROD_ID12("NextCom K.K.", "Next Hawk", 0xaedaec74, 0xad050ef1),
ce8a0037
DB		 1697 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "10/100Mbps Ethernet Card", 0x281f1c5d, 0x6e41773b),
1698 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Ethernet", 0x281f1c5d, 0x00b2e941),
1699 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "ETHERNET", 0x281f1c5d, 0x3ff7175b),
1700 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Ethernet 10BaseT Card", 0x281f1c5d, 0x4de2f6c8),
1701 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Ethernet Card", 0x281f1c5d, 0x5e9d92c0),
1702 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Ethernet Combo card", 0x281f1c5d, 0x929c486c),
1703 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "ETHERNET V1.0", 0x281f1c5d, 0x4d8817c8),
1704 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "FastEthernet", 0x281f1c5d, 0xfe871eeb),
1705 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Fast-Ethernet", 0x281f1c5d, 0x45f1f3b4),
1706 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "FAST ETHERNET CARD", 0x281f1c5d, 0xec5dbca7),
1707 PCMCIA_DEVICE_PROD_ID12("PCMCIA LAN", "Ethernet", 0x7500e246, 0x00b2e941),
1708 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "LNT-10TN", 0x281f1c5d, 0xe707f641),
1709 PCMCIA_DEVICE_PROD_ID12("PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc),
1710 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "UE2212", 0x281f1c5d, 0xbf17199b),
1711 PCMCIA_DEVICE_PROD_ID12("PCMCIA", " Ethernet NE2000 Compatible", 0x281f1c5d, 0x42d5d7e1),
1712 PCMCIA_DEVICE_PROD_ID12("PRETEC", "Ethernet CompactLAN 10baseT 3.3V", 0xebf91155, 0x30074c80),
1713 PCMCIA_DEVICE_PROD_ID12("PRETEC", "Ethernet CompactLAN 10BaseT 3.3V", 0xebf91155, 0x7f5a4f50),
1714 PCMCIA_DEVICE_PROD_ID12("Psion Dacom", "Gold Card Ethernet", 0xf5f025c2, 0x3a30e110),
1715 PCMCIA_DEVICE_PROD_ID12("=RELIA==", "Ethernet", 0xcdd0644a, 0x00b2e941),
1716 PCMCIA_DEVICE_PROD_ID12("RP", "1625B Ethernet NE2000 Compatible", 0xe3e66e22, 0xb96150df),
1717 PCMCIA_DEVICE_PROD_ID12("RPTI", "EP400 Ethernet NE2000 Compatible", 0xdc6f88fd, 0x4a7e2ae0),
1718 PCMCIA_DEVICE_PROD_ID12("RPTI", "EP401 Ethernet NE2000 Compatible", 0xdc6f88fd, 0x4bcbd7fd),
1719 PCMCIA_DEVICE_PROD_ID12("RPTI LTD.", "EP400", 0xc53ac515, 0x81e39388),
1720 PCMCIA_DEVICE_PROD_ID12("SCM", "Ethernet Combo card", 0xbdc3b102, 0x929c486c),
1721 PCMCIA_DEVICE_PROD_ID12("Seiko Epson Corp.", "Ethernet", 0x09928730, 0x00b2e941),
1722 PCMCIA_DEVICE_PROD_ID12("SMC", "EZCard-10-PCMCIA", 0xc4f8b18b, 0xfb21d265),
1723 PCMCIA_DEVICE_PROD_ID12("Socket Communications Inc", "Socket EA PCMCIA LAN Adapter Revision D", 0xc70a4760, 0x2ade483e),
1724 PCMCIA_DEVICE_PROD_ID12("Socket Communications Inc", "Socket EA PCMCIA LAN Adapter Revision E", 0xc70a4760, 0x5dd978a8),
1725 PCMCIA_DEVICE_PROD_ID12("TDK", "LAK-CD031 for PCMCIA", 0x1eae9475, 0x0ed386fa),
1726 PCMCIA_DEVICE_PROD_ID12("Telecom Device K.K.", "SuperSocket RE450T", 0x466b05f0, 0x8b74bc4f),
9c7046cd 1727 PCMCIA_DEVICE_PROD_ID12("Telecom Device K.K.", "SuperSocket RE550T", 0x466b05f0, 0x33c8db2a),
ce8a0037
DB		 1728 PCMCIA_DEVICE_PROD_ID13("Hypertec", "EP401", 0x8787bec7, 0xf6e4a31e),
1729 PCMCIA_DEVICE_PROD_ID13("KingMax Technology Inc.", "Ethernet Card", 0x932b7189, 0x5e9d92c0),
1730 PCMCIA_DEVICE_PROD_ID13("LONGSHINE", "EP401", 0xf866b0b0, 0xf6e4a31e),
1731 PCMCIA_DEVICE_PROD_ID13("Xircom", "CFE-10", 0x2e3ee845, 0x22a49f89),
1732 PCMCIA_DEVICE_PROD_ID1("CyQ've 10 Base-T LAN CARD", 0x94faf360),
1733 PCMCIA_DEVICE_PROD_ID1("EP-210 PCMCIA LAN CARD.", 0x8850b4de),
1734 PCMCIA_DEVICE_PROD_ID1("ETHER-C16", 0x06a8514f),
1735 PCMCIA_DEVICE_PROD_ID1("IC-CARD", 0x60cb09a6),
1736 PCMCIA_DEVICE_PROD_ID1("NE2000 Compatible", 0x75b8ad5a),
1737 PCMCIA_DEVICE_PROD_ID2("EN-6200P2", 0xa996d078),
1738 /* too generic! */
1739 /* PCMCIA_DEVICE_PROD_ID12("PCMCIA", "10/100 Ethernet Card", 0x281f1c5d, 0x11b0ffc0), */
1740 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "PCMCIA", "EN2218-LAN/MODEM", 0x281f1c5d, 0x570f348e, "PCMLM28.cis"),
1741 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "PCMCIA", "UE2218-LAN/MODEM", 0x281f1c5d, 0x6fdcacee, "PCMLM28.cis"),
1742 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "PCMLM28.cis"),
1743 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "PCMLM28.cis"),
1744 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "PCMLM28.cis"),
1745 PCMCIA_MFC_DEVICE_CIS_PROD_ID12(0, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "DP83903.cis"),
1746 PCMCIA_MFC_DEVICE_CIS_PROD_ID4(0, "NSC MF LAN/Modem", 0x58fc6056, "DP83903.cis"),
1747 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0175, 0x0000, "DP83903.cis"),
1748 PCMCIA_DEVICE_CIS_MANF_CARD(0xc00f, 0x0002, "LA-PCM.cis"),
1749 PCMCIA_DEVICE_CIS_PROD_ID12("KTI", "PE520 PLUS", 0xad180345, 0x9d58d392, "PE520.cis"),
1750 PCMCIA_DEVICE_CIS_PROD_ID12("NDC", "Ethernet", 0x01c43ae1, 0x00b2e941, "NE2K.cis"),
1751 PCMCIA_DEVICE_CIS_PROD_ID12("PMX ", "PE-200", 0x34f3f1c8, 0x10b59f8c, "PE-200.cis"),
1752 PCMCIA_DEVICE_CIS_PROD_ID12("TAMARACK", "Ethernet", 0xcf434fba, 0x00b2e941, "tamarack.cis"),
7a1fd330 1753 PCMCIA_DEVICE_PROD_ID12("Ethernet", "CF Size PC Card", 0x00b2e941, 0x43ac239b),
6ed14254 1754 PCMCIA_DEVICE_PROD_ID123("Fast Ethernet", "CF Size PC Card", "1.0",
cf393ebe 1755 0xb4be14e3, 0x43ac239b, 0x0877b627),
ce8a0037
DB		 1756 PCMCIA_DEVICE_NULL
1757};
1758MODULE_DEVICE_TABLE(pcmcia, pcnet_ids);
1759
1da177e4
LT		 1760static struct pcmcia_driver pcnet_driver = {
1761 .drv = {
1762 .name = "pcnet_cs",
1763 },
f8cfa618 1764 .probe = pcnet_probe,
cc3b4866 1765 .remove = pcnet_detach,
1da177e4 1766 .owner = THIS_MODULE,
ce8a0037 1767 .id_table = pcnet_ids,
98e4c28b
DB		 1768 .suspend = pcnet_suspend,
1769 .resume = pcnet_resume,
1da177e4
LT		 1770};
1771
1772static int __init init_pcnet_cs(void)
1773{
1774 return pcmcia_register_driver(&pcnet_driver);
1775}
1776
1777static void __exit exit_pcnet_cs(void)
1778{
1779 DEBUG(0, "pcnet_cs: unloading\n");
1780 pcmcia_unregister_driver(&pcnet_driver);
1da177e4
LT		 1781}
1782
1783module_init(init_pcnet_cs);
1784module_exit(exit_pcnet_cs);
Linux kernel - Deliverables
This page took 0.537844 seconds and 5 git commands to generate.