Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* [xirc2ps_cs.c wk 03.11.99] (1.40 1999/11/18 00:06:03) |
2 | * Xircom CreditCard Ethernet Adapter IIps driver | |
3 | * Xircom Realport 10/100 (RE-100) driver | |
4 | * | |
5 | * This driver supports various Xircom CreditCard Ethernet adapters | |
6 | * including the CE2, CE IIps, RE-10, CEM28, CEM33, CE33, CEM56, | |
7 | * CE3-100, CE3B, RE-100, REM10BT, and REM56G-100. | |
8 | * | |
9 | * 2000-09-24 <psheer@icon.co.za> The Xircom CE3B-100 may not | |
10 | * autodetect the media properly. In this case use the | |
11 | * if_port=1 (for 10BaseT) or if_port=4 (for 100BaseT) options | |
12 | * to force the media type. | |
13 | * | |
14 | * Written originally by Werner Koch based on David Hinds' skeleton of the | |
15 | * PCMCIA driver. | |
16 | * | |
17 | * Copyright (c) 1997,1998 Werner Koch (dd9jn) | |
18 | * | |
19 | * This driver is free software; you can redistribute it and/or modify | |
20 | * it under the terms of the GNU General Public License as published by | |
21 | * the Free Software Foundation; either version 2 of the License, or | |
22 | * (at your option) any later version. | |
23 | * | |
24 | * It is distributed in the hope that it will be useful, | |
25 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
26 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
27 | * GNU General Public License for more details. | |
28 | * | |
29 | * You should have received a copy of the GNU General Public License | |
30 | * along with this program; if not, write to the Free Software | |
31 | * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA | |
32 | * | |
33 | * | |
34 | * ALTERNATIVELY, this driver may be distributed under the terms of | |
35 | * the following license, in which case the provisions of this license | |
36 | * are required INSTEAD OF the GNU General Public License. (This clause | |
37 | * is necessary due to a potential bad interaction between the GPL and | |
38 | * the restrictions contained in a BSD-style copyright.) | |
39 | * | |
40 | * Redistribution and use in source and binary forms, with or without | |
41 | * modification, are permitted provided that the following conditions | |
42 | * are met: | |
43 | * 1. Redistributions of source code must retain the above copyright | |
44 | * notice, and the entire permission notice in its entirety, | |
45 | * including the disclaimer of warranties. | |
46 | * 2. Redistributions in binary form must reproduce the above copyright | |
47 | * notice, this list of conditions and the following disclaimer in the | |
48 | * documentation and/or other materials provided with the distribution. | |
49 | * 3. The name of the author may not be used to endorse or promote | |
50 | * products derived from this software without specific prior | |
51 | * written permission. | |
52 | * | |
53 | * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED | |
54 | * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES | |
55 | * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE | |
56 | * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, | |
57 | * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES | |
58 | * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR | |
59 | * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) | |
60 | * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, | |
61 | * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) | |
62 | * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED | |
63 | * OF THE POSSIBILITY OF SUCH DAMAGE. | |
64 | */ | |
65 | ||
66 | #include <linux/module.h> | |
67 | #include <linux/kernel.h> | |
68 | #include <linux/init.h> | |
69 | #include <linux/ptrace.h> | |
70 | #include <linux/slab.h> | |
71 | #include <linux/string.h> | |
72 | #include <linux/timer.h> | |
73 | #include <linux/interrupt.h> | |
74 | #include <linux/in.h> | |
75 | #include <linux/delay.h> | |
76 | #include <linux/ethtool.h> | |
77 | #include <linux/netdevice.h> | |
78 | #include <linux/etherdevice.h> | |
79 | #include <linux/skbuff.h> | |
80 | #include <linux/if_arp.h> | |
81 | #include <linux/ioport.h> | |
82 | #include <linux/bitops.h> | |
83 | ||
1da177e4 LT |
84 | #include <pcmcia/cs_types.h> |
85 | #include <pcmcia/cs.h> | |
86 | #include <pcmcia/cistpl.h> | |
87 | #include <pcmcia/cisreg.h> | |
88 | #include <pcmcia/ciscode.h> | |
89 | ||
90 | #include <asm/io.h> | |
91 | #include <asm/system.h> | |
92 | #include <asm/uaccess.h> | |
93 | ||
94 | #ifndef MANFID_COMPAQ | |
95 | #define MANFID_COMPAQ 0x0138 | |
96 | #define MANFID_COMPAQ2 0x0183 /* is this correct? */ | |
97 | #endif | |
98 | ||
99 | #include <pcmcia/ds.h> | |
100 | ||
101 | /* Time in jiffies before concluding Tx hung */ | |
102 | #define TX_TIMEOUT ((400*HZ)/1000) | |
103 | ||
104 | /**************** | |
105 | * Some constants used to access the hardware | |
106 | */ | |
107 | ||
108 | /* Register offsets and value constans */ | |
109 | #define XIRCREG_CR 0 /* Command register (wr) */ | |
110 | enum xirc_cr { | |
111 | TransmitPacket = 0x01, | |
112 | SoftReset = 0x02, | |
113 | EnableIntr = 0x04, | |
114 | ForceIntr = 0x08, | |
115 | ClearTxFIFO = 0x10, | |
116 | ClearRxOvrun = 0x20, | |
117 | RestartTx = 0x40 | |
118 | }; | |
119 | #define XIRCREG_ESR 0 /* Ethernet status register (rd) */ | |
120 | enum xirc_esr { | |
121 | FullPktRcvd = 0x01, /* full packet in receive buffer */ | |
122 | PktRejected = 0x04, /* a packet has been rejected */ | |
123 | TxPktPend = 0x08, /* TX Packet Pending */ | |
124 | IncorPolarity = 0x10, | |
125 | MediaSelect = 0x20 /* set if TP, clear if AUI */ | |
126 | }; | |
127 | #define XIRCREG_PR 1 /* Page Register select */ | |
128 | #define XIRCREG_EDP 4 /* Ethernet Data Port Register */ | |
129 | #define XIRCREG_ISR 6 /* Ethernet Interrupt Status Register */ | |
130 | enum xirc_isr { | |
131 | TxBufOvr = 0x01, /* TX Buffer Overflow */ | |
132 | PktTxed = 0x02, /* Packet Transmitted */ | |
133 | MACIntr = 0x04, /* MAC Interrupt occurred */ | |
134 | TxResGrant = 0x08, /* Tx Reservation Granted */ | |
135 | RxFullPkt = 0x20, /* Rx Full Packet */ | |
136 | RxPktRej = 0x40, /* Rx Packet Rejected */ | |
137 | ForcedIntr= 0x80 /* Forced Interrupt */ | |
138 | }; | |
139 | #define XIRCREG1_IMR0 12 /* Ethernet Interrupt Mask Register (on page 1)*/ | |
140 | #define XIRCREG1_IMR1 13 | |
141 | #define XIRCREG0_TSO 8 /* Transmit Space Open Register (on page 0)*/ | |
142 | #define XIRCREG0_TRS 10 /* Transmit reservation Size Register (page 0)*/ | |
143 | #define XIRCREG0_DO 12 /* Data Offset Register (page 0) (wr) */ | |
144 | #define XIRCREG0_RSR 12 /* Receive Status Register (page 0) (rd) */ | |
145 | enum xirc_rsr { | |
146 | PhyPkt = 0x01, /* set:physical packet, clear: multicast packet */ | |
147 | BrdcstPkt = 0x02, /* set if it is a broadcast packet */ | |
148 | PktTooLong = 0x04, /* set if packet length > 1518 */ | |
149 | AlignErr = 0x10, /* incorrect CRC and last octet not complete */ | |
150 | CRCErr = 0x20, /* incorrect CRC and last octet is complete */ | |
151 | PktRxOk = 0x80 /* received ok */ | |
152 | }; | |
153 | #define XIRCREG0_PTR 13 /* packets transmitted register (rd) */ | |
154 | #define XIRCREG0_RBC 14 /* receive byte count regsister (rd) */ | |
155 | #define XIRCREG1_ECR 14 /* ethernet configurationn register */ | |
156 | enum xirc_ecr { | |
157 | FullDuplex = 0x04, /* enable full duplex mode */ | |
158 | LongTPMode = 0x08, /* adjust for longer lengths of TP cable */ | |
159 | DisablePolCor = 0x10,/* disable auto polarity correction */ | |
160 | DisableLinkPulse = 0x20, /* disable link pulse generation */ | |
161 | DisableAutoTx = 0x40, /* disable auto-transmit */ | |
162 | }; | |
163 | #define XIRCREG2_RBS 8 /* receive buffer start register */ | |
164 | #define XIRCREG2_LED 10 /* LED Configuration register */ | |
165 | /* values for the leds: Bits 2-0 for led 1 | |
166 | * 0 disabled Bits 5-3 for led 2 | |
167 | * 1 collision | |
168 | * 2 noncollision | |
169 | * 3 link_detected | |
170 | * 4 incor_polarity | |
171 | * 5 jabber | |
172 | * 6 auto_assertion | |
173 | * 7 rx_tx_activity | |
174 | */ | |
175 | #define XIRCREG2_MSR 12 /* Mohawk specific register */ | |
176 | ||
177 | #define XIRCREG4_GPR0 8 /* General Purpose Register 0 */ | |
178 | #define XIRCREG4_GPR1 9 /* General Purpose Register 1 */ | |
179 | #define XIRCREG2_GPR2 13 /* General Purpose Register 2 (page2!)*/ | |
180 | #define XIRCREG4_BOV 10 /* Bonding Version Register */ | |
181 | #define XIRCREG4_LMA 12 /* Local Memory Address Register */ | |
182 | #define XIRCREG4_LMD 14 /* Local Memory Data Port */ | |
183 | /* MAC register can only by accessed with 8 bit operations */ | |
184 | #define XIRCREG40_CMD0 8 /* Command Register (wr) */ | |
185 | enum xirc_cmd { /* Commands */ | |
186 | Transmit = 0x01, | |
187 | EnableRecv = 0x04, | |
188 | DisableRecv = 0x08, | |
189 | Abort = 0x10, | |
190 | Online = 0x20, | |
191 | IntrAck = 0x40, | |
192 | Offline = 0x80 | |
193 | }; | |
194 | #define XIRCREG5_RHSA0 10 /* Rx Host Start Address */ | |
195 | #define XIRCREG40_RXST0 9 /* Receive Status Register */ | |
196 | #define XIRCREG40_TXST0 11 /* Transmit Status Register 0 */ | |
197 | #define XIRCREG40_TXST1 12 /* Transmit Status Register 10 */ | |
198 | #define XIRCREG40_RMASK0 13 /* Receive Mask Register */ | |
199 | #define XIRCREG40_TMASK0 14 /* Transmit Mask Register 0 */ | |
200 | #define XIRCREG40_TMASK1 15 /* Transmit Mask Register 0 */ | |
201 | #define XIRCREG42_SWC0 8 /* Software Configuration 0 */ | |
202 | #define XIRCREG42_SWC1 9 /* Software Configuration 1 */ | |
203 | #define XIRCREG42_BOC 10 /* Back-Off Configuration */ | |
204 | #define XIRCREG44_TDR0 8 /* Time Domain Reflectometry 0 */ | |
205 | #define XIRCREG44_TDR1 9 /* Time Domain Reflectometry 1 */ | |
206 | #define XIRCREG44_RXBC_LO 10 /* Rx Byte Count 0 (rd) */ | |
207 | #define XIRCREG44_RXBC_HI 11 /* Rx Byte Count 1 (rd) */ | |
208 | #define XIRCREG45_REV 15 /* Revision Register (rd) */ | |
209 | #define XIRCREG50_IA 8 /* Individual Address (8-13) */ | |
210 | ||
f71e1309 | 211 | static const char *if_names[] = { "Auto", "10BaseT", "10Base2", "AUI", "100BaseT" }; |
1da177e4 LT |
212 | |
213 | /**************** | |
214 | * All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If | |
215 | * you do not define PCMCIA_DEBUG at all, all the debug code will be | |
216 | * left out. If you compile with PCMCIA_DEBUG=0, the debug code will | |
217 | * be present but disabled -- but it can then be enabled for specific | |
218 | * modules at load time with a 'pc_debug=#' option to insmod. | |
219 | */ | |
220 | #ifdef PCMCIA_DEBUG | |
221 | static int pc_debug = PCMCIA_DEBUG; | |
222 | module_param(pc_debug, int, 0); | |
223 | #define DEBUG(n, args...) if (pc_debug>(n)) printk(KDBG_XIRC args) | |
224 | #else | |
225 | #define DEBUG(n, args...) | |
226 | #endif | |
227 | ||
228 | #define KDBG_XIRC KERN_DEBUG "xirc2ps_cs: " | |
229 | #define KERR_XIRC KERN_ERR "xirc2ps_cs: " | |
230 | #define KWRN_XIRC KERN_WARNING "xirc2ps_cs: " | |
231 | #define KNOT_XIRC KERN_NOTICE "xirc2ps_cs: " | |
232 | #define KINF_XIRC KERN_INFO "xirc2ps_cs: " | |
233 | ||
234 | /* card types */ | |
235 | #define XIR_UNKNOWN 0 /* unknown: not supported */ | |
236 | #define XIR_CE 1 /* (prodid 1) different hardware: not supported */ | |
237 | #define XIR_CE2 2 /* (prodid 2) */ | |
238 | #define XIR_CE3 3 /* (prodid 3) */ | |
239 | #define XIR_CEM 4 /* (prodid 1) different hardware: not supported */ | |
240 | #define XIR_CEM2 5 /* (prodid 2) */ | |
241 | #define XIR_CEM3 6 /* (prodid 3) */ | |
242 | #define XIR_CEM33 7 /* (prodid 4) */ | |
243 | #define XIR_CEM56M 8 /* (prodid 5) */ | |
244 | #define XIR_CEM56 9 /* (prodid 6) */ | |
245 | #define XIR_CM28 10 /* (prodid 3) modem only: not supported here */ | |
246 | #define XIR_CM33 11 /* (prodid 4) modem only: not supported here */ | |
247 | #define XIR_CM56 12 /* (prodid 5) modem only: not supported here */ | |
248 | #define XIR_CG 13 /* (prodid 1) GSM modem only: not supported */ | |
249 | #define XIR_CBE 14 /* (prodid 1) cardbus ethernet: not supported */ | |
250 | /*====================================================================*/ | |
251 | ||
252 | /* Module parameters */ | |
253 | ||
254 | MODULE_DESCRIPTION("Xircom PCMCIA ethernet driver"); | |
255 | MODULE_LICENSE("Dual MPL/GPL"); | |
256 | ||
257 | #define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0) | |
258 | ||
259 | INT_MODULE_PARM(if_port, 0); | |
260 | INT_MODULE_PARM(full_duplex, 0); | |
261 | INT_MODULE_PARM(do_sound, 1); | |
262 | INT_MODULE_PARM(lockup_hack, 0); /* anti lockup hack */ | |
263 | ||
264 | /*====================================================================*/ | |
265 | ||
266 | /* We do not process more than these number of bytes during one | |
267 | * interrupt. (Of course we receive complete packets, so this is not | |
268 | * an exact value). | |
269 | * Something between 2000..22000; first value gives best interrupt latency, | |
270 | * the second enables the usage of the complete on-chip buffer. We use the | |
271 | * high value as the initial value. | |
272 | */ | |
273 | static unsigned maxrx_bytes = 22000; | |
274 | ||
275 | /* MII management prototypes */ | |
906da809 OJ |
276 | static void mii_idle(unsigned int ioaddr); |
277 | static void mii_putbit(unsigned int ioaddr, unsigned data); | |
278 | static int mii_getbit(unsigned int ioaddr); | |
279 | static void mii_wbits(unsigned int ioaddr, unsigned data, int len); | |
280 | static unsigned mii_rd(unsigned int ioaddr, u_char phyaddr, u_char phyreg); | |
281 | static void mii_wr(unsigned int ioaddr, u_char phyaddr, u_char phyreg, | |
1da177e4 LT |
282 | unsigned data, int len); |
283 | ||
284 | /* | |
285 | * The event() function is this driver's Card Services event handler. | |
286 | * It will be called by Card Services when an appropriate card status | |
287 | * event is received. The config() and release() entry points are | |
288 | * used to configure or release a socket, in response to card insertion | |
289 | * and ejection events. They are invoked from the event handler. | |
290 | */ | |
291 | ||
fba395ee | 292 | static int has_ce2_string(struct pcmcia_device * link); |
15b99ac1 | 293 | static int xirc2ps_config(struct pcmcia_device * link); |
fba395ee | 294 | static void xirc2ps_release(struct pcmcia_device * link); |
1da177e4 LT |
295 | |
296 | /**************** | |
297 | * The attach() and detach() entry points are used to create and destroy | |
298 | * "instances" of the driver, where each instance represents everything | |
299 | * needed to manage one actual PCMCIA card. | |
300 | */ | |
301 | ||
cc3b4866 | 302 | static void xirc2ps_detach(struct pcmcia_device *p_dev); |
1da177e4 LT |
303 | |
304 | /**************** | |
305 | * You'll also need to prototype all the functions that will actually | |
306 | * be used to talk to your device. See 'pcmem_cs' for a good example | |
307 | * of a fully self-sufficient driver; the other drivers rely more or | |
308 | * less on other parts of the kernel. | |
309 | */ | |
310 | ||
7d12e780 | 311 | static irqreturn_t xirc2ps_interrupt(int irq, void *dev_id); |
1da177e4 | 312 | |
1da177e4 LT |
313 | /**************** |
314 | * A linked list of "instances" of the device. Each actual | |
315 | * PCMCIA card corresponds to one device instance, and is described | |
fba395ee | 316 | * by one struct pcmcia_device structure (defined in ds.h). |
1da177e4 LT |
317 | * |
318 | * You may not want to use a linked list for this -- for example, the | |
fba395ee | 319 | * memory card driver uses an array of struct pcmcia_device pointers, where minor |
1da177e4 LT |
320 | * device numbers are used to derive the corresponding array index. |
321 | */ | |
322 | ||
1da177e4 | 323 | /**************** |
1da177e4 LT |
324 | * A driver needs to provide a dev_node_t structure for each device |
325 | * on a card. In some cases, there is only one device per card (for | |
326 | * example, ethernet cards, modems). In other cases, there may be | |
327 | * many actual or logical devices (SCSI adapters, memory cards with | |
328 | * multiple partitions). The dev_node_t structures need to be kept | |
fba395ee | 329 | * in a linked list starting at the 'dev' field of a struct pcmcia_device |
1da177e4 LT |
330 | * structure. We allocate them in the card's private data structure, |
331 | * because they generally can't be allocated dynamically. | |
332 | */ | |
333 | ||
334 | typedef struct local_info_t { | |
c4028958 | 335 | struct net_device *dev; |
fd238232 | 336 | struct pcmcia_device *p_dev; |
1da177e4 LT |
337 | dev_node_t node; |
338 | struct net_device_stats stats; | |
339 | int card_type; | |
340 | int probe_port; | |
341 | int silicon; /* silicon revision. 0=old CE2, 1=Scipper, 4=Mohawk */ | |
342 | int mohawk; /* a CE3 type card */ | |
343 | int dingo; /* a CEM56 type card */ | |
344 | int new_mii; /* has full 10baseT/100baseT MII */ | |
345 | int modem; /* is a multi function card (i.e with a modem) */ | |
346 | void __iomem *dingo_ccr; /* only used for CEM56 cards */ | |
347 | unsigned last_ptr_value; /* last packets transmitted value */ | |
348 | const char *manf_str; | |
9a469abe | 349 | struct work_struct tx_timeout_task; |
1da177e4 LT |
350 | } local_info_t; |
351 | ||
352 | /**************** | |
353 | * Some more prototypes | |
354 | */ | |
355 | static int do_start_xmit(struct sk_buff *skb, struct net_device *dev); | |
ed4cb133 | 356 | static void xirc_tx_timeout(struct net_device *dev); |
c4028958 | 357 | static void xirc2ps_tx_timeout_task(struct work_struct *work); |
1da177e4 LT |
358 | static struct net_device_stats *do_get_stats(struct net_device *dev); |
359 | static void set_addresses(struct net_device *dev); | |
360 | static void set_multicast_list(struct net_device *dev); | |
fba395ee | 361 | static int set_card_type(struct pcmcia_device *link, const void *s); |
1da177e4 LT |
362 | static int do_config(struct net_device *dev, struct ifmap *map); |
363 | static int do_open(struct net_device *dev); | |
364 | static int do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); | |
7282d491 | 365 | static const struct ethtool_ops netdev_ethtool_ops; |
1da177e4 LT |
366 | static void hardreset(struct net_device *dev); |
367 | static void do_reset(struct net_device *dev, int full); | |
368 | static int init_mii(struct net_device *dev); | |
369 | static void do_powerdown(struct net_device *dev); | |
370 | static int do_stop(struct net_device *dev); | |
371 | ||
372 | /*=============== Helper functions =========================*/ | |
373 | static int | |
fba395ee | 374 | first_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse) |
1da177e4 LT |
375 | { |
376 | int err; | |
377 | ||
378 | if ((err = pcmcia_get_first_tuple(handle, tuple)) == 0 && | |
379 | (err = pcmcia_get_tuple_data(handle, tuple)) == 0) | |
2f3061eb | 380 | err = pcmcia_parse_tuple(tuple, parse); |
1da177e4 LT |
381 | return err; |
382 | } | |
383 | ||
384 | static int | |
fba395ee | 385 | next_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse) |
1da177e4 LT |
386 | { |
387 | int err; | |
388 | ||
389 | if ((err = pcmcia_get_next_tuple(handle, tuple)) == 0 && | |
390 | (err = pcmcia_get_tuple_data(handle, tuple)) == 0) | |
2f3061eb | 391 | err = pcmcia_parse_tuple(tuple, parse); |
1da177e4 LT |
392 | return err; |
393 | } | |
394 | ||
395 | #define SelectPage(pgnr) outb((pgnr), ioaddr + XIRCREG_PR) | |
396 | #define GetByte(reg) ((unsigned)inb(ioaddr + (reg))) | |
397 | #define GetWord(reg) ((unsigned)inw(ioaddr + (reg))) | |
398 | #define PutByte(reg,value) outb((value), ioaddr+(reg)) | |
399 | #define PutWord(reg,value) outw((value), ioaddr+(reg)) | |
400 | ||
401 | /*====== Functions used for debugging =================================*/ | |
402 | #if defined(PCMCIA_DEBUG) && 0 /* reading regs may change system status */ | |
403 | static void | |
404 | PrintRegisters(struct net_device *dev) | |
405 | { | |
906da809 | 406 | unsigned int ioaddr = dev->base_addr; |
1da177e4 LT |
407 | |
408 | if (pc_debug > 1) { | |
409 | int i, page; | |
410 | ||
411 | printk(KDBG_XIRC "Register common: "); | |
412 | for (i = 0; i < 8; i++) | |
413 | printk(" %2.2x", GetByte(i)); | |
414 | printk("\n"); | |
415 | for (page = 0; page <= 8; page++) { | |
416 | printk(KDBG_XIRC "Register page %2x: ", page); | |
417 | SelectPage(page); | |
418 | for (i = 8; i < 16; i++) | |
419 | printk(" %2.2x", GetByte(i)); | |
420 | printk("\n"); | |
421 | } | |
422 | for (page=0x40 ; page <= 0x5f; page++) { | |
423 | if (page == 0x43 || (page >= 0x46 && page <= 0x4f) | |
424 | || (page >= 0x51 && page <=0x5e)) | |
425 | continue; | |
426 | printk(KDBG_XIRC "Register page %2x: ", page); | |
427 | SelectPage(page); | |
428 | for (i = 8; i < 16; i++) | |
429 | printk(" %2.2x", GetByte(i)); | |
430 | printk("\n"); | |
431 | } | |
432 | } | |
433 | } | |
434 | #endif /* PCMCIA_DEBUG */ | |
435 | ||
436 | /*============== MII Management functions ===============*/ | |
437 | ||
438 | /**************** | |
439 | * Turn around for read | |
440 | */ | |
441 | static void | |
906da809 | 442 | mii_idle(unsigned int ioaddr) |
1da177e4 LT |
443 | { |
444 | PutByte(XIRCREG2_GPR2, 0x04|0); /* drive MDCK low */ | |
445 | udelay(1); | |
446 | PutByte(XIRCREG2_GPR2, 0x04|1); /* and drive MDCK high */ | |
447 | udelay(1); | |
448 | } | |
449 | ||
450 | /**************** | |
451 | * Write a bit to MDI/O | |
452 | */ | |
453 | static void | |
906da809 | 454 | mii_putbit(unsigned int ioaddr, unsigned data) |
1da177e4 LT |
455 | { |
456 | #if 1 | |
457 | if (data) { | |
458 | PutByte(XIRCREG2_GPR2, 0x0c|2|0); /* set MDIO */ | |
459 | udelay(1); | |
460 | PutByte(XIRCREG2_GPR2, 0x0c|2|1); /* and drive MDCK high */ | |
461 | udelay(1); | |
462 | } else { | |
463 | PutByte(XIRCREG2_GPR2, 0x0c|0|0); /* clear MDIO */ | |
464 | udelay(1); | |
465 | PutByte(XIRCREG2_GPR2, 0x0c|0|1); /* and drive MDCK high */ | |
466 | udelay(1); | |
467 | } | |
468 | #else | |
469 | if (data) { | |
470 | PutWord(XIRCREG2_GPR2-1, 0x0e0e); | |
471 | udelay(1); | |
472 | PutWord(XIRCREG2_GPR2-1, 0x0f0f); | |
473 | udelay(1); | |
474 | } else { | |
475 | PutWord(XIRCREG2_GPR2-1, 0x0c0c); | |
476 | udelay(1); | |
477 | PutWord(XIRCREG2_GPR2-1, 0x0d0d); | |
478 | udelay(1); | |
479 | } | |
480 | #endif | |
481 | } | |
482 | ||
483 | /**************** | |
484 | * Get a bit from MDI/O | |
485 | */ | |
486 | static int | |
906da809 | 487 | mii_getbit(unsigned int ioaddr) |
1da177e4 LT |
488 | { |
489 | unsigned d; | |
490 | ||
491 | PutByte(XIRCREG2_GPR2, 4|0); /* drive MDCK low */ | |
492 | udelay(1); | |
493 | d = GetByte(XIRCREG2_GPR2); /* read MDIO */ | |
494 | PutByte(XIRCREG2_GPR2, 4|1); /* drive MDCK high again */ | |
495 | udelay(1); | |
496 | return d & 0x20; /* read MDIO */ | |
497 | } | |
498 | ||
499 | static void | |
906da809 | 500 | mii_wbits(unsigned int ioaddr, unsigned data, int len) |
1da177e4 LT |
501 | { |
502 | unsigned m = 1 << (len-1); | |
503 | for (; m; m >>= 1) | |
504 | mii_putbit(ioaddr, data & m); | |
505 | } | |
506 | ||
507 | static unsigned | |
906da809 | 508 | mii_rd(unsigned int ioaddr, u_char phyaddr, u_char phyreg) |
1da177e4 LT |
509 | { |
510 | int i; | |
511 | unsigned data=0, m; | |
512 | ||
513 | SelectPage(2); | |
514 | for (i=0; i < 32; i++) /* 32 bit preamble */ | |
515 | mii_putbit(ioaddr, 1); | |
516 | mii_wbits(ioaddr, 0x06, 4); /* Start and opcode for read */ | |
517 | mii_wbits(ioaddr, phyaddr, 5); /* PHY address to be accessed */ | |
518 | mii_wbits(ioaddr, phyreg, 5); /* PHY register to read */ | |
519 | mii_idle(ioaddr); /* turn around */ | |
520 | mii_getbit(ioaddr); | |
521 | ||
522 | for (m = 1<<15; m; m >>= 1) | |
523 | if (mii_getbit(ioaddr)) | |
524 | data |= m; | |
525 | mii_idle(ioaddr); | |
526 | return data; | |
527 | } | |
528 | ||
529 | static void | |
906da809 OJ |
530 | mii_wr(unsigned int ioaddr, u_char phyaddr, u_char phyreg, unsigned data, |
531 | int len) | |
1da177e4 LT |
532 | { |
533 | int i; | |
534 | ||
535 | SelectPage(2); | |
536 | for (i=0; i < 32; i++) /* 32 bit preamble */ | |
537 | mii_putbit(ioaddr, 1); | |
538 | mii_wbits(ioaddr, 0x05, 4); /* Start and opcode for write */ | |
539 | mii_wbits(ioaddr, phyaddr, 5); /* PHY address to be accessed */ | |
540 | mii_wbits(ioaddr, phyreg, 5); /* PHY Register to write */ | |
541 | mii_putbit(ioaddr, 1); /* turn around */ | |
542 | mii_putbit(ioaddr, 0); | |
543 | mii_wbits(ioaddr, data, len); /* And write the data */ | |
544 | mii_idle(ioaddr); | |
545 | } | |
546 | ||
547 | /*============= Main bulk of functions =========================*/ | |
548 | ||
549 | /**************** | |
550 | * xirc2ps_attach() creates an "instance" of the driver, allocating | |
551 | * local data structures for one device. The device is registered | |
552 | * with Card Services. | |
553 | * | |
554 | * The dev_link structure is initialized, but we don't actually | |
555 | * configure the card at this point -- we wait until we receive a | |
556 | * card insertion event. | |
557 | */ | |
558 | ||
f8cfa618 | 559 | static int |
15b99ac1 | 560 | xirc2ps_probe(struct pcmcia_device *link) |
1da177e4 | 561 | { |
1da177e4 LT |
562 | struct net_device *dev; |
563 | local_info_t *local; | |
1da177e4 LT |
564 | |
565 | DEBUG(0, "attach()\n"); | |
566 | ||
567 | /* Allocate the device structure */ | |
568 | dev = alloc_etherdev(sizeof(local_info_t)); | |
569 | if (!dev) | |
f8cfa618 | 570 | return -ENOMEM; |
1da177e4 | 571 | local = netdev_priv(dev); |
c4028958 | 572 | local->dev = dev; |
fba395ee | 573 | local->p_dev = link; |
1da177e4 LT |
574 | link->priv = dev; |
575 | ||
576 | /* General socket configuration */ | |
577 | link->conf.Attributes = CONF_ENABLE_IRQ; | |
1da177e4 LT |
578 | link->conf.IntType = INT_MEMORY_AND_IO; |
579 | link->conf.ConfigIndex = 1; | |
1da177e4 LT |
580 | link->irq.Handler = xirc2ps_interrupt; |
581 | link->irq.Instance = dev; | |
582 | ||
583 | /* Fill in card specific entries */ | |
1da177e4 LT |
584 | dev->hard_start_xmit = &do_start_xmit; |
585 | dev->set_config = &do_config; | |
586 | dev->get_stats = &do_get_stats; | |
587 | dev->do_ioctl = &do_ioctl; | |
588 | SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops); | |
589 | dev->set_multicast_list = &set_multicast_list; | |
590 | dev->open = &do_open; | |
591 | dev->stop = &do_stop; | |
592 | #ifdef HAVE_TX_TIMEOUT | |
ed4cb133 | 593 | dev->tx_timeout = xirc_tx_timeout; |
1da177e4 | 594 | dev->watchdog_timeo = TX_TIMEOUT; |
c4028958 | 595 | INIT_WORK(&local->tx_timeout_task, xirc2ps_tx_timeout_task); |
1da177e4 LT |
596 | #endif |
597 | ||
15b99ac1 | 598 | return xirc2ps_config(link); |
1da177e4 LT |
599 | } /* xirc2ps_attach */ |
600 | ||
601 | /**************** | |
602 | * This deletes a driver "instance". The device is de-registered | |
603 | * with Card Services. If it has been released, all local data | |
604 | * structures are freed. Otherwise, the structures will be freed | |
605 | * when the device is released. | |
606 | */ | |
607 | ||
608 | static void | |
fba395ee | 609 | xirc2ps_detach(struct pcmcia_device *link) |
1da177e4 LT |
610 | { |
611 | struct net_device *dev = link->priv; | |
1da177e4 LT |
612 | |
613 | DEBUG(0, "detach(0x%p)\n", link); | |
614 | ||
fd238232 | 615 | if (link->dev_node) |
1da177e4 LT |
616 | unregister_netdev(dev); |
617 | ||
e2d40963 | 618 | xirc2ps_release(link); |
1da177e4 | 619 | |
1da177e4 LT |
620 | free_netdev(dev); |
621 | } /* xirc2ps_detach */ | |
622 | ||
623 | /**************** | |
624 | * Detect the type of the card. s is the buffer with the data of tuple 0x20 | |
625 | * Returns: 0 := not supported | |
626 | * mediaid=11 and prodid=47 | |
627 | * Media-Id bits: | |
628 | * Ethernet 0x01 | |
629 | * Tokenring 0x02 | |
630 | * Arcnet 0x04 | |
631 | * Wireless 0x08 | |
632 | * Modem 0x10 | |
633 | * GSM only 0x20 | |
634 | * Prod-Id bits: | |
635 | * Pocket 0x10 | |
636 | * External 0x20 | |
637 | * Creditcard 0x40 | |
638 | * Cardbus 0x80 | |
639 | * | |
640 | */ | |
641 | static int | |
fba395ee | 642 | set_card_type(struct pcmcia_device *link, const void *s) |
1da177e4 LT |
643 | { |
644 | struct net_device *dev = link->priv; | |
645 | local_info_t *local = netdev_priv(dev); | |
646 | #ifdef PCMCIA_DEBUG | |
647 | unsigned cisrev = ((const unsigned char *)s)[2]; | |
648 | #endif | |
649 | unsigned mediaid= ((const unsigned char *)s)[3]; | |
650 | unsigned prodid = ((const unsigned char *)s)[4]; | |
651 | ||
652 | DEBUG(0, "cisrev=%02x mediaid=%02x prodid=%02x\n", | |
653 | cisrev, mediaid, prodid); | |
654 | ||
655 | local->mohawk = 0; | |
656 | local->dingo = 0; | |
657 | local->modem = 0; | |
658 | local->card_type = XIR_UNKNOWN; | |
659 | if (!(prodid & 0x40)) { | |
660 | printk(KNOT_XIRC "Ooops: Not a creditcard\n"); | |
661 | return 0; | |
662 | } | |
663 | if (!(mediaid & 0x01)) { | |
664 | printk(KNOT_XIRC "Not an Ethernet card\n"); | |
665 | return 0; | |
666 | } | |
667 | if (mediaid & 0x10) { | |
668 | local->modem = 1; | |
669 | switch(prodid & 15) { | |
670 | case 1: local->card_type = XIR_CEM ; break; | |
671 | case 2: local->card_type = XIR_CEM2 ; break; | |
672 | case 3: local->card_type = XIR_CEM3 ; break; | |
673 | case 4: local->card_type = XIR_CEM33 ; break; | |
674 | case 5: local->card_type = XIR_CEM56M; | |
675 | local->mohawk = 1; | |
676 | break; | |
677 | case 6: | |
678 | case 7: /* 7 is the RealPort 10/56 */ | |
679 | local->card_type = XIR_CEM56 ; | |
680 | local->mohawk = 1; | |
681 | local->dingo = 1; | |
682 | break; | |
683 | } | |
684 | } else { | |
685 | switch(prodid & 15) { | |
686 | case 1: local->card_type = has_ce2_string(link)? XIR_CE2 : XIR_CE ; | |
687 | break; | |
688 | case 2: local->card_type = XIR_CE2; break; | |
689 | case 3: local->card_type = XIR_CE3; | |
690 | local->mohawk = 1; | |
691 | break; | |
692 | } | |
693 | } | |
694 | if (local->card_type == XIR_CE || local->card_type == XIR_CEM) { | |
695 | printk(KNOT_XIRC "Sorry, this is an old CE card\n"); | |
696 | return 0; | |
697 | } | |
698 | if (local->card_type == XIR_UNKNOWN) | |
699 | printk(KNOT_XIRC "unknown card (mediaid=%02x prodid=%02x)\n", | |
700 | mediaid, prodid); | |
701 | ||
702 | return 1; | |
703 | } | |
704 | ||
705 | /**************** | |
706 | * There are some CE2 cards out which claim to be a CE card. | |
707 | * This function looks for a "CE2" in the 3rd version field. | |
708 | * Returns: true if this is a CE2 | |
709 | */ | |
710 | static int | |
a9606fd3 | 711 | has_ce2_string(struct pcmcia_device * p_dev) |
1da177e4 | 712 | { |
a9606fd3 DB |
713 | if (p_dev->prod_id[2] && strstr(p_dev->prod_id[2], "CE2")) |
714 | return 1; | |
715 | return 0; | |
1da177e4 LT |
716 | } |
717 | ||
b54bf94b DB |
718 | static int |
719 | xirc2ps_config_modem(struct pcmcia_device *p_dev, | |
720 | cistpl_cftable_entry_t *cf, | |
8e2fc39d | 721 | cistpl_cftable_entry_t *dflt, |
ad913c11 | 722 | unsigned int vcc, |
b54bf94b DB |
723 | void *priv_data) |
724 | { | |
725 | unsigned int ioaddr; | |
726 | ||
727 | if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) { | |
728 | for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) { | |
b54bf94b DB |
729 | p_dev->io.BasePort2 = cf->io.win[0].base; |
730 | p_dev->io.BasePort1 = ioaddr; | |
731 | if (!pcmcia_request_io(p_dev, &p_dev->io)) | |
732 | return 0; | |
733 | } | |
734 | } | |
735 | return -ENODEV; | |
736 | } | |
737 | ||
738 | static int | |
739 | xirc2ps_config_check(struct pcmcia_device *p_dev, | |
740 | cistpl_cftable_entry_t *cf, | |
8e2fc39d | 741 | cistpl_cftable_entry_t *dflt, |
ad913c11 | 742 | unsigned int vcc, |
b54bf94b DB |
743 | void *priv_data) |
744 | { | |
745 | int *pass = priv_data; | |
746 | ||
747 | if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) { | |
b54bf94b DB |
748 | p_dev->io.BasePort2 = cf->io.win[0].base; |
749 | p_dev->io.BasePort1 = p_dev->io.BasePort2 | |
750 | + (*pass ? (cf->index & 0x20 ? -24:8) | |
751 | : (cf->index & 0x20 ? 8:-24)); | |
752 | if (!pcmcia_request_io(p_dev, &p_dev->io)) | |
753 | return 0; | |
754 | } | |
755 | return -ENODEV; | |
756 | ||
757 | } | |
758 | ||
1da177e4 LT |
759 | /**************** |
760 | * xirc2ps_config() is scheduled to run after a CARD_INSERTION event | |
761 | * is received, to configure the PCMCIA socket, and to make the | |
762 | * ethernet device available to the system. | |
763 | */ | |
15b99ac1 | 764 | static int |
fba395ee | 765 | xirc2ps_config(struct pcmcia_device * link) |
1da177e4 | 766 | { |
1da177e4 LT |
767 | struct net_device *dev = link->priv; |
768 | local_info_t *local = netdev_priv(dev); | |
b54bf94b | 769 | unsigned int ioaddr; |
1da177e4 LT |
770 | tuple_t tuple; |
771 | cisparse_t parse; | |
1da177e4 LT |
772 | int err, i; |
773 | u_char buf[64]; | |
774 | cistpl_lan_node_id_t *node_id = (cistpl_lan_node_id_t*)parse.funce.data; | |
0795af57 | 775 | DECLARE_MAC_BUF(mac); |
1da177e4 LT |
776 | |
777 | local->dingo_ccr = NULL; | |
778 | ||
779 | DEBUG(0, "config(0x%p)\n", link); | |
780 | ||
781 | /* | |
782 | * This reads the card's CONFIG tuple to find its configuration | |
783 | * registers. | |
784 | */ | |
785 | tuple.Attributes = 0; | |
786 | tuple.TupleData = buf; | |
787 | tuple.TupleDataMax = 64; | |
788 | tuple.TupleOffset = 0; | |
789 | ||
790 | /* Is this a valid card */ | |
791 | tuple.DesiredTuple = CISTPL_MANFID; | |
fba395ee | 792 | if ((err=first_tuple(link, &tuple, &parse))) { |
1da177e4 LT |
793 | printk(KNOT_XIRC "manfid not found in CIS\n"); |
794 | goto failure; | |
795 | } | |
796 | ||
797 | switch(parse.manfid.manf) { | |
798 | case MANFID_XIRCOM: | |
799 | local->manf_str = "Xircom"; | |
800 | break; | |
801 | case MANFID_ACCTON: | |
802 | local->manf_str = "Accton"; | |
803 | break; | |
804 | case MANFID_COMPAQ: | |
805 | case MANFID_COMPAQ2: | |
806 | local->manf_str = "Compaq"; | |
807 | break; | |
808 | case MANFID_INTEL: | |
809 | local->manf_str = "Intel"; | |
810 | break; | |
811 | case MANFID_TOSHIBA: | |
812 | local->manf_str = "Toshiba"; | |
813 | break; | |
814 | default: | |
815 | printk(KNOT_XIRC "Unknown Card Manufacturer ID: 0x%04x\n", | |
816 | (unsigned)parse.manfid.manf); | |
817 | goto failure; | |
818 | } | |
819 | DEBUG(0, "found %s card\n", local->manf_str); | |
820 | ||
821 | if (!set_card_type(link, buf)) { | |
822 | printk(KNOT_XIRC "this card is not supported\n"); | |
823 | goto failure; | |
824 | } | |
825 | ||
1da177e4 LT |
826 | /* get the ethernet address from the CIS */ |
827 | tuple.DesiredTuple = CISTPL_FUNCE; | |
fba395ee DB |
828 | for (err = first_tuple(link, &tuple, &parse); !err; |
829 | err = next_tuple(link, &tuple, &parse)) { | |
1da177e4 LT |
830 | /* Once I saw two CISTPL_FUNCE_LAN_NODE_ID entries: |
831 | * the first one with a length of zero the second correct - | |
832 | * so I skip all entries with length 0 */ | |
833 | if (parse.funce.type == CISTPL_FUNCE_LAN_NODE_ID | |
834 | && ((cistpl_lan_node_id_t *)parse.funce.data)->nb) | |
835 | break; | |
836 | } | |
837 | if (err) { /* not found: try to get the node-id from tuple 0x89 */ | |
838 | tuple.DesiredTuple = 0x89; /* data layout looks like tuple 0x22 */ | |
fba395ee DB |
839 | if ((err = pcmcia_get_first_tuple(link, &tuple)) == 0 && |
840 | (err = pcmcia_get_tuple_data(link, &tuple)) == 0) { | |
1da177e4 LT |
841 | if (tuple.TupleDataLen == 8 && *buf == CISTPL_FUNCE_LAN_NODE_ID) |
842 | memcpy(&parse, buf, 8); | |
843 | else | |
844 | err = -1; | |
845 | } | |
846 | } | |
847 | if (err) { /* another try (James Lehmer's CE2 version 4.1)*/ | |
848 | tuple.DesiredTuple = CISTPL_FUNCE; | |
fba395ee DB |
849 | for (err = first_tuple(link, &tuple, &parse); !err; |
850 | err = next_tuple(link, &tuple, &parse)) { | |
1da177e4 LT |
851 | if (parse.funce.type == 0x02 && parse.funce.data[0] == 1 |
852 | && parse.funce.data[1] == 6 && tuple.TupleDataLen == 13) { | |
853 | buf[1] = 4; | |
854 | memcpy(&parse, buf+1, 8); | |
855 | break; | |
856 | } | |
857 | } | |
858 | } | |
859 | if (err) { | |
860 | printk(KNOT_XIRC "node-id not found in CIS\n"); | |
861 | goto failure; | |
862 | } | |
863 | node_id = (cistpl_lan_node_id_t *)parse.funce.data; | |
864 | if (node_id->nb != 6) { | |
865 | printk(KNOT_XIRC "malformed node-id in CIS\n"); | |
866 | goto failure; | |
867 | } | |
868 | for (i=0; i < 6; i++) | |
869 | dev->dev_addr[i] = node_id->id[i]; | |
870 | ||
1da177e4 LT |
871 | link->io.IOAddrLines =10; |
872 | link->io.Attributes1 = IO_DATA_PATH_WIDTH_16; | |
873 | link->irq.Attributes = IRQ_HANDLE_PRESENT; | |
874 | link->irq.IRQInfo1 = IRQ_LEVEL_ID; | |
875 | if (local->modem) { | |
876 | int pass; | |
877 | ||
878 | if (do_sound) { | |
879 | link->conf.Attributes |= CONF_ENABLE_SPKR; | |
880 | link->conf.Status |= CCSR_AUDIO_ENA; | |
881 | } | |
882 | link->irq.Attributes |= IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED ; | |
883 | link->io.NumPorts2 = 8; | |
884 | link->io.Attributes2 = IO_DATA_PATH_WIDTH_8; | |
885 | if (local->dingo) { | |
886 | /* Take the Modem IO port from the CIS and scan for a free | |
887 | * Ethernet port */ | |
888 | link->io.NumPorts1 = 16; /* no Mako stuff anymore */ | |
b54bf94b DB |
889 | if (!pcmcia_loop_config(link, xirc2ps_config_modem, NULL)) |
890 | goto port_found; | |
1da177e4 LT |
891 | } else { |
892 | link->io.NumPorts1 = 18; | |
893 | /* We do 2 passes here: The first one uses the regular mapping and | |
894 | * the second tries again, thereby considering that the 32 ports are | |
895 | * mirrored every 32 bytes. Actually we use a mirrored port for | |
896 | * the Mako if (on the first pass) the COR bit 5 is set. | |
897 | */ | |
b54bf94b DB |
898 | for (pass=0; pass < 2; pass++) |
899 | if (!pcmcia_loop_config(link, xirc2ps_config_check, &pass)) | |
1da177e4 | 900 | goto port_found; |
1da177e4 LT |
901 | /* if special option: |
902 | * try to configure as Ethernet only. | |
903 | * .... */ | |
904 | } | |
905 | printk(KNOT_XIRC "no ports available\n"); | |
906 | } else { | |
5e7bf8cc | 907 | link->irq.Attributes |= IRQ_TYPE_DYNAMIC_SHARING; |
1da177e4 LT |
908 | link->io.NumPorts1 = 16; |
909 | for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) { | |
910 | link->io.BasePort1 = ioaddr; | |
fba395ee | 911 | if (!(err=pcmcia_request_io(link, &link->io))) |
1da177e4 LT |
912 | goto port_found; |
913 | } | |
914 | link->io.BasePort1 = 0; /* let CS decide */ | |
fba395ee DB |
915 | if ((err=pcmcia_request_io(link, &link->io))) { |
916 | cs_error(link, RequestIO, err); | |
1da177e4 LT |
917 | goto config_error; |
918 | } | |
919 | } | |
920 | port_found: | |
921 | if (err) | |
922 | goto config_error; | |
923 | ||
924 | /**************** | |
925 | * Now allocate an interrupt line. Note that this does not | |
926 | * actually assign a handler to the interrupt. | |
927 | */ | |
fba395ee DB |
928 | if ((err=pcmcia_request_irq(link, &link->irq))) { |
929 | cs_error(link, RequestIRQ, err); | |
1da177e4 LT |
930 | goto config_error; |
931 | } | |
932 | ||
933 | /**************** | |
934 | * This actually configures the PCMCIA socket -- setting up | |
935 | * the I/O windows and the interrupt mapping. | |
936 | */ | |
fba395ee DB |
937 | if ((err=pcmcia_request_configuration(link, &link->conf))) { |
938 | cs_error(link, RequestConfiguration, err); | |
1da177e4 LT |
939 | goto config_error; |
940 | } | |
941 | ||
942 | if (local->dingo) { | |
943 | conf_reg_t reg; | |
944 | win_req_t req; | |
945 | memreq_t mem; | |
946 | ||
947 | /* Reset the modem's BAR to the correct value | |
948 | * This is necessary because in the RequestConfiguration call, | |
949 | * the base address of the ethernet port (BasePort1) is written | |
950 | * to the BAR registers of the modem. | |
951 | */ | |
952 | reg.Action = CS_WRITE; | |
953 | reg.Offset = CISREG_IOBASE_0; | |
954 | reg.Value = link->io.BasePort2 & 0xff; | |
fba395ee DB |
955 | if ((err = pcmcia_access_configuration_register(link, ®))) { |
956 | cs_error(link, AccessConfigurationRegister, err); | |
1da177e4 LT |
957 | goto config_error; |
958 | } | |
959 | reg.Action = CS_WRITE; | |
960 | reg.Offset = CISREG_IOBASE_1; | |
961 | reg.Value = (link->io.BasePort2 >> 8) & 0xff; | |
fba395ee DB |
962 | if ((err = pcmcia_access_configuration_register(link, ®))) { |
963 | cs_error(link, AccessConfigurationRegister, err); | |
1da177e4 LT |
964 | goto config_error; |
965 | } | |
966 | ||
967 | /* There is no config entry for the Ethernet part which | |
968 | * is at 0x0800. So we allocate a window into the attribute | |
969 | * memory and write direct to the CIS registers | |
970 | */ | |
971 | req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; | |
972 | req.Base = req.Size = 0; | |
973 | req.AccessSpeed = 0; | |
fba395ee DB |
974 | if ((err = pcmcia_request_window(&link, &req, &link->win))) { |
975 | cs_error(link, RequestWindow, err); | |
1da177e4 LT |
976 | goto config_error; |
977 | } | |
978 | local->dingo_ccr = ioremap(req.Base,0x1000) + 0x0800; | |
979 | mem.CardOffset = 0x0; | |
980 | mem.Page = 0; | |
981 | if ((err = pcmcia_map_mem_page(link->win, &mem))) { | |
fba395ee | 982 | cs_error(link, MapMemPage, err); |
1da177e4 LT |
983 | goto config_error; |
984 | } | |
985 | ||
986 | /* Setup the CCRs; there are no infos in the CIS about the Ethernet | |
987 | * part. | |
988 | */ | |
989 | writeb(0x47, local->dingo_ccr + CISREG_COR); | |
990 | ioaddr = link->io.BasePort1; | |
991 | writeb(ioaddr & 0xff , local->dingo_ccr + CISREG_IOBASE_0); | |
992 | writeb((ioaddr >> 8)&0xff , local->dingo_ccr + CISREG_IOBASE_1); | |
993 | ||
994 | #if 0 | |
995 | { | |
996 | u_char tmp; | |
997 | printk(KERN_INFO "ECOR:"); | |
998 | for (i=0; i < 7; i++) { | |
999 | tmp = readb(local->dingo_ccr + i*2); | |
1000 | printk(" %02x", tmp); | |
1001 | } | |
1002 | printk("\n"); | |
1003 | printk(KERN_INFO "DCOR:"); | |
1004 | for (i=0; i < 4; i++) { | |
1005 | tmp = readb(local->dingo_ccr + 0x20 + i*2); | |
1006 | printk(" %02x", tmp); | |
1007 | } | |
1008 | printk("\n"); | |
1009 | printk(KERN_INFO "SCOR:"); | |
1010 | for (i=0; i < 10; i++) { | |
1011 | tmp = readb(local->dingo_ccr + 0x40 + i*2); | |
1012 | printk(" %02x", tmp); | |
1013 | } | |
1014 | printk("\n"); | |
1015 | } | |
1016 | #endif | |
1017 | ||
1018 | writeb(0x01, local->dingo_ccr + 0x20); | |
1019 | writeb(0x0c, local->dingo_ccr + 0x22); | |
1020 | writeb(0x00, local->dingo_ccr + 0x24); | |
1021 | writeb(0x00, local->dingo_ccr + 0x26); | |
1022 | writeb(0x00, local->dingo_ccr + 0x28); | |
1023 | } | |
1024 | ||
1025 | /* The if_port symbol can be set when the module is loaded */ | |
1026 | local->probe_port=0; | |
1027 | if (!if_port) { | |
1028 | local->probe_port = dev->if_port = 1; | |
1029 | } else if ((if_port >= 1 && if_port <= 2) || | |
1030 | (local->mohawk && if_port==4)) | |
1031 | dev->if_port = if_port; | |
1032 | else | |
1033 | printk(KNOT_XIRC "invalid if_port requested\n"); | |
1034 | ||
1035 | /* we can now register the device with the net subsystem */ | |
1036 | dev->irq = link->irq.AssignedIRQ; | |
1037 | dev->base_addr = link->io.BasePort1; | |
1038 | ||
1039 | if (local->dingo) | |
1040 | do_reset(dev, 1); /* a kludge to make the cem56 work */ | |
1041 | ||
fd238232 | 1042 | link->dev_node = &local->node; |
fba395ee | 1043 | SET_NETDEV_DEV(dev, &handle_to_dev(link)); |
1da177e4 LT |
1044 | |
1045 | if ((err=register_netdev(dev))) { | |
1046 | printk(KNOT_XIRC "register_netdev() failed\n"); | |
fd238232 | 1047 | link->dev_node = NULL; |
1da177e4 LT |
1048 | goto config_error; |
1049 | } | |
1050 | ||
1051 | strcpy(local->node.dev_name, dev->name); | |
1052 | ||
1053 | /* give some infos about the hardware */ | |
0795af57 JP |
1054 | printk(KERN_INFO "%s: %s: port %#3lx, irq %d, hwaddr %s\n", |
1055 | dev->name, local->manf_str,(u_long)dev->base_addr, (int)dev->irq, | |
1056 | print_mac(mac, dev->dev_addr)); | |
1da177e4 | 1057 | |
15b99ac1 | 1058 | return 0; |
1da177e4 LT |
1059 | |
1060 | config_error: | |
1da177e4 | 1061 | xirc2ps_release(link); |
15b99ac1 | 1062 | return -ENODEV; |
1da177e4 | 1063 | |
1da177e4 | 1064 | failure: |
15b99ac1 | 1065 | return -ENODEV; |
1da177e4 LT |
1066 | } /* xirc2ps_config */ |
1067 | ||
1068 | /**************** | |
1069 | * After a card is removed, xirc2ps_release() will unregister the net | |
1070 | * device, and release the PCMCIA configuration. If the device is | |
1071 | * still open, this will be postponed until it is closed. | |
1072 | */ | |
1073 | static void | |
fba395ee | 1074 | xirc2ps_release(struct pcmcia_device *link) |
1da177e4 | 1075 | { |
5f2a71fc | 1076 | DEBUG(0, "release(0x%p)\n", link); |
1da177e4 | 1077 | |
5f2a71fc DB |
1078 | if (link->win) { |
1079 | struct net_device *dev = link->priv; | |
1080 | local_info_t *local = netdev_priv(dev); | |
1081 | if (local->dingo) | |
1082 | iounmap(local->dingo_ccr - 0x0800); | |
1083 | } | |
fba395ee | 1084 | pcmcia_disable_device(link); |
1da177e4 LT |
1085 | } /* xirc2ps_release */ |
1086 | ||
1087 | /*====================================================================*/ | |
1088 | ||
98e4c28b | 1089 | |
fba395ee | 1090 | static int xirc2ps_suspend(struct pcmcia_device *link) |
98e4c28b | 1091 | { |
98e4c28b DB |
1092 | struct net_device *dev = link->priv; |
1093 | ||
e2d40963 DB |
1094 | if (link->open) { |
1095 | netif_device_detach(dev); | |
1096 | do_powerdown(dev); | |
98e4c28b DB |
1097 | } |
1098 | ||
1099 | return 0; | |
1100 | } | |
1101 | ||
fba395ee | 1102 | static int xirc2ps_resume(struct pcmcia_device *link) |
98e4c28b | 1103 | { |
98e4c28b DB |
1104 | struct net_device *dev = link->priv; |
1105 | ||
e2d40963 | 1106 | if (link->open) { |
8661bb5b DB |
1107 | do_reset(dev,1); |
1108 | netif_device_attach(dev); | |
98e4c28b DB |
1109 | } |
1110 | ||
1111 | return 0; | |
1112 | } | |
1113 | ||
1da177e4 LT |
1114 | |
1115 | /*====================================================================*/ | |
1116 | ||
1117 | /**************** | |
1118 | * This is the Interrupt service route. | |
1119 | */ | |
1120 | static irqreturn_t | |
7d12e780 | 1121 | xirc2ps_interrupt(int irq, void *dev_id) |
1da177e4 LT |
1122 | { |
1123 | struct net_device *dev = (struct net_device *)dev_id; | |
1124 | local_info_t *lp = netdev_priv(dev); | |
906da809 | 1125 | unsigned int ioaddr; |
1da177e4 LT |
1126 | u_char saved_page; |
1127 | unsigned bytes_rcvd; | |
1128 | unsigned int_status, eth_status, rx_status, tx_status; | |
1129 | unsigned rsr, pktlen; | |
1130 | ulong start_ticks = jiffies; /* fixme: jiffies rollover every 497 days | |
1131 | * is this something to worry about? | |
1132 | * -- on a laptop? | |
1133 | */ | |
1134 | ||
1135 | if (!netif_device_present(dev)) | |
1136 | return IRQ_HANDLED; | |
1137 | ||
1138 | ioaddr = dev->base_addr; | |
1139 | if (lp->mohawk) { /* must disable the interrupt */ | |
1140 | PutByte(XIRCREG_CR, 0); | |
1141 | } | |
1142 | ||
1143 | DEBUG(6, "%s: interrupt %d at %#x.\n", dev->name, irq, ioaddr); | |
1144 | ||
1145 | saved_page = GetByte(XIRCREG_PR); | |
1146 | /* Read the ISR to see whats the cause for the interrupt. | |
1147 | * This also clears the interrupt flags on CE2 cards | |
1148 | */ | |
1149 | int_status = GetByte(XIRCREG_ISR); | |
1150 | bytes_rcvd = 0; | |
1151 | loop_entry: | |
1152 | if (int_status == 0xff) { /* card may be ejected */ | |
1153 | DEBUG(3, "%s: interrupt %d for dead card\n", dev->name, irq); | |
1154 | goto leave; | |
1155 | } | |
1156 | eth_status = GetByte(XIRCREG_ESR); | |
1157 | ||
1158 | SelectPage(0x40); | |
1159 | rx_status = GetByte(XIRCREG40_RXST0); | |
1160 | PutByte(XIRCREG40_RXST0, (~rx_status & 0xff)); | |
1161 | tx_status = GetByte(XIRCREG40_TXST0); | |
1162 | tx_status |= GetByte(XIRCREG40_TXST1) << 8; | |
1163 | PutByte(XIRCREG40_TXST0, 0); | |
1164 | PutByte(XIRCREG40_TXST1, 0); | |
1165 | ||
1166 | DEBUG(3, "%s: ISR=%#2.2x ESR=%#2.2x RSR=%#2.2x TSR=%#4.4x\n", | |
1167 | dev->name, int_status, eth_status, rx_status, tx_status); | |
1168 | ||
1169 | /***** receive section ******/ | |
1170 | SelectPage(0); | |
1171 | while (eth_status & FullPktRcvd) { | |
1172 | rsr = GetByte(XIRCREG0_RSR); | |
1173 | if (bytes_rcvd > maxrx_bytes && (rsr & PktRxOk)) { | |
1174 | /* too many bytes received during this int, drop the rest of the | |
1175 | * packets */ | |
1176 | lp->stats.rx_dropped++; | |
1177 | DEBUG(2, "%s: RX drop, too much done\n", dev->name); | |
1178 | } else if (rsr & PktRxOk) { | |
1179 | struct sk_buff *skb; | |
1180 | ||
1181 | pktlen = GetWord(XIRCREG0_RBC); | |
1182 | bytes_rcvd += pktlen; | |
1183 | ||
1184 | DEBUG(5, "rsr=%#02x packet_length=%u\n", rsr, pktlen); | |
1185 | ||
1186 | skb = dev_alloc_skb(pktlen+3); /* 1 extra so we can use insw */ | |
1187 | if (!skb) { | |
1188 | printk(KNOT_XIRC "low memory, packet dropped (size=%u)\n", | |
1189 | pktlen); | |
1190 | lp->stats.rx_dropped++; | |
1191 | } else { /* okay get the packet */ | |
1192 | skb_reserve(skb, 2); | |
1193 | if (lp->silicon == 0 ) { /* work around a hardware bug */ | |
1194 | unsigned rhsa; /* receive start address */ | |
1195 | ||
1196 | SelectPage(5); | |
1197 | rhsa = GetWord(XIRCREG5_RHSA0); | |
1198 | SelectPage(0); | |
1199 | rhsa += 3; /* skip control infos */ | |
1200 | if (rhsa >= 0x8000) | |
1201 | rhsa = 0; | |
1202 | if (rhsa + pktlen > 0x8000) { | |
1203 | unsigned i; | |
1204 | u_char *buf = skb_put(skb, pktlen); | |
1205 | for (i=0; i < pktlen ; i++, rhsa++) { | |
1206 | buf[i] = GetByte(XIRCREG_EDP); | |
1207 | if (rhsa == 0x8000) { | |
1208 | rhsa = 0; | |
1209 | i--; | |
1210 | } | |
1211 | } | |
1212 | } else { | |
1213 | insw(ioaddr+XIRCREG_EDP, | |
1214 | skb_put(skb, pktlen), (pktlen+1)>>1); | |
1215 | } | |
1216 | } | |
1217 | #if 0 | |
1218 | else if (lp->mohawk) { | |
1219 | /* To use this 32 bit access we should use | |
1220 | * a manual optimized loop | |
1221 | * Also the words are swapped, we can get more | |
1222 | * performance by using 32 bit access and swapping | |
1223 | * the words in a register. Will need this for cardbus | |
1224 | * | |
1225 | * Note: don't forget to change the ALLOC_SKB to .. +3 | |
1226 | */ | |
1227 | unsigned i; | |
1228 | u_long *p = skb_put(skb, pktlen); | |
1229 | register u_long a; | |
906da809 | 1230 | unsigned int edpreg = ioaddr+XIRCREG_EDP-2; |
1da177e4 LT |
1231 | for (i=0; i < len ; i += 4, p++) { |
1232 | a = inl(edpreg); | |
1233 | __asm__("rorl $16,%0\n\t" | |
1234 | :"=q" (a) | |
1235 | : "0" (a)); | |
1236 | *p = a; | |
1237 | } | |
1238 | } | |
1239 | #endif | |
1240 | else { | |
1241 | insw(ioaddr+XIRCREG_EDP, skb_put(skb, pktlen), | |
1242 | (pktlen+1)>>1); | |
1243 | } | |
1244 | skb->protocol = eth_type_trans(skb, dev); | |
1da177e4 LT |
1245 | netif_rx(skb); |
1246 | dev->last_rx = jiffies; | |
1247 | lp->stats.rx_packets++; | |
1248 | lp->stats.rx_bytes += pktlen; | |
1249 | if (!(rsr & PhyPkt)) | |
1250 | lp->stats.multicast++; | |
1251 | } | |
1252 | } else { /* bad packet */ | |
1253 | DEBUG(5, "rsr=%#02x\n", rsr); | |
1254 | } | |
1255 | if (rsr & PktTooLong) { | |
1256 | lp->stats.rx_frame_errors++; | |
1257 | DEBUG(3, "%s: Packet too long\n", dev->name); | |
1258 | } | |
1259 | if (rsr & CRCErr) { | |
1260 | lp->stats.rx_crc_errors++; | |
1261 | DEBUG(3, "%s: CRC error\n", dev->name); | |
1262 | } | |
1263 | if (rsr & AlignErr) { | |
1264 | lp->stats.rx_fifo_errors++; /* okay ? */ | |
1265 | DEBUG(3, "%s: Alignment error\n", dev->name); | |
1266 | } | |
1267 | ||
1268 | /* clear the received/dropped/error packet */ | |
1269 | PutWord(XIRCREG0_DO, 0x8000); /* issue cmd: skip_rx_packet */ | |
1270 | ||
1271 | /* get the new ethernet status */ | |
1272 | eth_status = GetByte(XIRCREG_ESR); | |
1273 | } | |
1274 | if (rx_status & 0x10) { /* Receive overrun */ | |
1275 | lp->stats.rx_over_errors++; | |
1276 | PutByte(XIRCREG_CR, ClearRxOvrun); | |
1277 | DEBUG(3, "receive overrun cleared\n"); | |
1278 | } | |
1279 | ||
1280 | /***** transmit section ******/ | |
1281 | if (int_status & PktTxed) { | |
1282 | unsigned n, nn; | |
1283 | ||
1284 | n = lp->last_ptr_value; | |
1285 | nn = GetByte(XIRCREG0_PTR); | |
1286 | lp->last_ptr_value = nn; | |
1287 | if (nn < n) /* rollover */ | |
1288 | lp->stats.tx_packets += 256 - n; | |
1289 | else if (n == nn) { /* happens sometimes - don't know why */ | |
1290 | DEBUG(0, "PTR not changed?\n"); | |
1291 | } else | |
1292 | lp->stats.tx_packets += lp->last_ptr_value - n; | |
1293 | netif_wake_queue(dev); | |
1294 | } | |
1295 | if (tx_status & 0x0002) { /* Execessive collissions */ | |
1296 | DEBUG(0, "tx restarted due to execssive collissions\n"); | |
1297 | PutByte(XIRCREG_CR, RestartTx); /* restart transmitter process */ | |
1298 | } | |
1299 | if (tx_status & 0x0040) | |
1300 | lp->stats.tx_aborted_errors++; | |
1301 | ||
1302 | /* recalculate our work chunk so that we limit the duration of this | |
1303 | * ISR to about 1/10 of a second. | |
1304 | * Calculate only if we received a reasonable amount of bytes. | |
1305 | */ | |
1306 | if (bytes_rcvd > 1000) { | |
1307 | u_long duration = jiffies - start_ticks; | |
1308 | ||
1309 | if (duration >= HZ/10) { /* if more than about 1/10 second */ | |
1310 | maxrx_bytes = (bytes_rcvd * (HZ/10)) / duration; | |
1311 | if (maxrx_bytes < 2000) | |
1312 | maxrx_bytes = 2000; | |
1313 | else if (maxrx_bytes > 22000) | |
1314 | maxrx_bytes = 22000; | |
1315 | DEBUG(1, "set maxrx=%u (rcvd=%u ticks=%lu)\n", | |
1316 | maxrx_bytes, bytes_rcvd, duration); | |
1317 | } else if (!duration && maxrx_bytes < 22000) { | |
1318 | /* now much faster */ | |
1319 | maxrx_bytes += 2000; | |
1320 | if (maxrx_bytes > 22000) | |
1321 | maxrx_bytes = 22000; | |
1322 | DEBUG(1, "set maxrx=%u\n", maxrx_bytes); | |
1323 | } | |
1324 | } | |
1325 | ||
1326 | leave: | |
1327 | if (lockup_hack) { | |
1328 | if (int_status != 0xff && (int_status = GetByte(XIRCREG_ISR)) != 0) | |
1329 | goto loop_entry; | |
1330 | } | |
1331 | SelectPage(saved_page); | |
1332 | PutByte(XIRCREG_CR, EnableIntr); /* re-enable interrupts */ | |
1333 | /* Instead of dropping packets during a receive, we could | |
1334 | * force an interrupt with this command: | |
1335 | * PutByte(XIRCREG_CR, EnableIntr|ForceIntr); | |
1336 | */ | |
1337 | return IRQ_HANDLED; | |
1338 | } /* xirc2ps_interrupt */ | |
1339 | ||
1340 | /*====================================================================*/ | |
1341 | ||
1342 | static void | |
c4028958 | 1343 | xirc2ps_tx_timeout_task(struct work_struct *work) |
1da177e4 | 1344 | { |
c4028958 DH |
1345 | local_info_t *local = |
1346 | container_of(work, local_info_t, tx_timeout_task); | |
1347 | struct net_device *dev = local->dev; | |
1da177e4 LT |
1348 | /* reset the card */ |
1349 | do_reset(dev,1); | |
1350 | dev->trans_start = jiffies; | |
1351 | netif_wake_queue(dev); | |
1352 | } | |
1353 | ||
9a469abe | 1354 | static void |
ed4cb133 | 1355 | xirc_tx_timeout(struct net_device *dev) |
9a469abe JA |
1356 | { |
1357 | local_info_t *lp = netdev_priv(dev); | |
1358 | lp->stats.tx_errors++; | |
1359 | printk(KERN_NOTICE "%s: transmit timed out\n", dev->name); | |
1360 | schedule_work(&lp->tx_timeout_task); | |
1361 | } | |
1362 | ||
1da177e4 LT |
1363 | static int |
1364 | do_start_xmit(struct sk_buff *skb, struct net_device *dev) | |
1365 | { | |
1366 | local_info_t *lp = netdev_priv(dev); | |
906da809 | 1367 | unsigned int ioaddr = dev->base_addr; |
1da177e4 LT |
1368 | int okay; |
1369 | unsigned freespace; | |
da4f5ccf | 1370 | unsigned pktlen = skb->len; |
1da177e4 LT |
1371 | |
1372 | DEBUG(1, "do_start_xmit(skb=%p, dev=%p) len=%u\n", | |
1373 | skb, dev, pktlen); | |
1374 | ||
1375 | ||
1376 | /* adjust the packet length to min. required | |
1377 | * and hope that the buffer is large enough | |
1378 | * to provide some random data. | |
1379 | * fixme: For Mohawk we can change this by sending | |
1380 | * a larger packetlen than we actually have; the chip will | |
1381 | * pad this in his buffer with random bytes | |
1382 | */ | |
1383 | if (pktlen < ETH_ZLEN) | |
1384 | { | |
5b057c6b | 1385 | if (skb_padto(skb, ETH_ZLEN)) |
1da177e4 LT |
1386 | return 0; |
1387 | pktlen = ETH_ZLEN; | |
1388 | } | |
1389 | ||
1390 | netif_stop_queue(dev); | |
1391 | SelectPage(0); | |
1392 | PutWord(XIRCREG0_TRS, (u_short)pktlen+2); | |
1393 | freespace = GetWord(XIRCREG0_TSO); | |
1394 | okay = freespace & 0x8000; | |
1395 | freespace &= 0x7fff; | |
1396 | /* TRS doesn't work - (indeed it is eliminated with sil-rev 1) */ | |
1397 | okay = pktlen +2 < freespace; | |
1398 | DEBUG(2 + (okay ? 2 : 0), "%s: avail. tx space=%u%s\n", | |
1399 | dev->name, freespace, okay ? " (okay)":" (not enough)"); | |
1400 | if (!okay) { /* not enough space */ | |
1401 | return 1; /* upper layer may decide to requeue this packet */ | |
1402 | } | |
1403 | /* send the packet */ | |
1404 | PutWord(XIRCREG_EDP, (u_short)pktlen); | |
1405 | outsw(ioaddr+XIRCREG_EDP, skb->data, pktlen>>1); | |
1406 | if (pktlen & 1) | |
1407 | PutByte(XIRCREG_EDP, skb->data[pktlen-1]); | |
1408 | ||
1409 | if (lp->mohawk) | |
1410 | PutByte(XIRCREG_CR, TransmitPacket|EnableIntr); | |
1411 | ||
1412 | dev_kfree_skb (skb); | |
1413 | dev->trans_start = jiffies; | |
1414 | lp->stats.tx_bytes += pktlen; | |
1415 | netif_start_queue(dev); | |
1416 | return 0; | |
1417 | } | |
1418 | ||
1419 | static struct net_device_stats * | |
1420 | do_get_stats(struct net_device *dev) | |
1421 | { | |
1422 | local_info_t *lp = netdev_priv(dev); | |
1423 | ||
1424 | /* lp->stats.rx_missed_errors = GetByte(?) */ | |
1425 | return &lp->stats; | |
1426 | } | |
1427 | ||
1428 | /**************** | |
1429 | * Set all addresses: This first one is the individual address, | |
1430 | * the next 9 addresses are taken from the multicast list and | |
1431 | * the rest is filled with the individual address. | |
1432 | */ | |
1433 | static void | |
1434 | set_addresses(struct net_device *dev) | |
1435 | { | |
906da809 | 1436 | unsigned int ioaddr = dev->base_addr; |
1da177e4 LT |
1437 | local_info_t *lp = netdev_priv(dev); |
1438 | struct dev_mc_list *dmi = dev->mc_list; | |
0b45d186 | 1439 | unsigned char *addr; |
1da177e4 LT |
1440 | int i,j,k,n; |
1441 | ||
1442 | SelectPage(k=0x50); | |
1443 | for (i=0,j=8,n=0; ; i++, j++) { | |
1444 | if (i > 5) { | |
1445 | if (++n > 9) | |
1446 | break; | |
1447 | i = 0; | |
0b45d186 K |
1448 | if (n > 1 && n <= dev->mc_count && dmi) { |
1449 | dmi = dmi->next; | |
1450 | } | |
1da177e4 LT |
1451 | } |
1452 | if (j > 15) { | |
1453 | j = 8; | |
1454 | k++; | |
1455 | SelectPage(k); | |
1456 | } | |
1457 | ||
0b45d186 | 1458 | if (n && n <= dev->mc_count && dmi) |
1da177e4 | 1459 | addr = dmi->dmi_addr; |
0b45d186 | 1460 | else |
1da177e4 LT |
1461 | addr = dev->dev_addr; |
1462 | ||
1463 | if (lp->mohawk) | |
1464 | PutByte(j, addr[5-i]); | |
1465 | else | |
1466 | PutByte(j, addr[i]); | |
1467 | } | |
1468 | SelectPage(0); | |
1469 | } | |
1470 | ||
1471 | /**************** | |
1472 | * Set or clear the multicast filter for this adaptor. | |
1473 | * We can filter up to 9 addresses, if more are requested we set | |
1474 | * multicast promiscuous mode. | |
1475 | */ | |
1476 | ||
1477 | static void | |
1478 | set_multicast_list(struct net_device *dev) | |
1479 | { | |
906da809 | 1480 | unsigned int ioaddr = dev->base_addr; |
43fc63dc | 1481 | unsigned value; |
1da177e4 LT |
1482 | |
1483 | SelectPage(0x42); | |
43fc63dc K |
1484 | value = GetByte(XIRCREG42_SWC1) & 0xC0; |
1485 | ||
1da177e4 | 1486 | if (dev->flags & IFF_PROMISC) { /* snoop */ |
43fc63dc | 1487 | PutByte(XIRCREG42_SWC1, value | 0x06); /* set MPE and PME */ |
1da177e4 | 1488 | } else if (dev->mc_count > 9 || (dev->flags & IFF_ALLMULTI)) { |
43fc63dc | 1489 | PutByte(XIRCREG42_SWC1, value | 0x02); /* set MPE */ |
1da177e4 LT |
1490 | } else if (dev->mc_count) { |
1491 | /* the chip can filter 9 addresses perfectly */ | |
43fc63dc | 1492 | PutByte(XIRCREG42_SWC1, value | 0x01); |
1da177e4 LT |
1493 | SelectPage(0x40); |
1494 | PutByte(XIRCREG40_CMD0, Offline); | |
1495 | set_addresses(dev); | |
1496 | SelectPage(0x40); | |
1497 | PutByte(XIRCREG40_CMD0, EnableRecv | Online); | |
1498 | } else { /* standard usage */ | |
43fc63dc | 1499 | PutByte(XIRCREG42_SWC1, value | 0x00); |
1da177e4 LT |
1500 | } |
1501 | SelectPage(0); | |
1502 | } | |
1503 | ||
1504 | static int | |
1505 | do_config(struct net_device *dev, struct ifmap *map) | |
1506 | { | |
1507 | local_info_t *local = netdev_priv(dev); | |
1508 | ||
1509 | DEBUG(0, "do_config(%p)\n", dev); | |
1510 | if (map->port != 255 && map->port != dev->if_port) { | |
1511 | if (map->port > 4) | |
1512 | return -EINVAL; | |
1513 | if (!map->port) { | |
1514 | local->probe_port = 1; | |
1515 | dev->if_port = 1; | |
1516 | } else { | |
1517 | local->probe_port = 0; | |
1518 | dev->if_port = map->port; | |
1519 | } | |
1520 | printk(KERN_INFO "%s: switching to %s port\n", | |
1521 | dev->name, if_names[dev->if_port]); | |
1522 | do_reset(dev,1); /* not the fine way :-) */ | |
1523 | } | |
1524 | return 0; | |
1525 | } | |
1526 | ||
1527 | /**************** | |
1528 | * Open the driver | |
1529 | */ | |
1530 | static int | |
1531 | do_open(struct net_device *dev) | |
1532 | { | |
1533 | local_info_t *lp = netdev_priv(dev); | |
fba395ee | 1534 | struct pcmcia_device *link = lp->p_dev; |
1da177e4 LT |
1535 | |
1536 | DEBUG(0, "do_open(%p)\n", dev); | |
1537 | ||
1538 | /* Check that the PCMCIA card is still here. */ | |
1539 | /* Physical device present signature. */ | |
9940ec36 | 1540 | if (!pcmcia_dev_present(link)) |
1da177e4 LT |
1541 | return -ENODEV; |
1542 | ||
1543 | /* okay */ | |
1544 | link->open++; | |
1545 | ||
1546 | netif_start_queue(dev); | |
1547 | do_reset(dev,1); | |
1548 | ||
1549 | return 0; | |
1550 | } | |
1551 | ||
1552 | static void netdev_get_drvinfo(struct net_device *dev, | |
1553 | struct ethtool_drvinfo *info) | |
1554 | { | |
1555 | strcpy(info->driver, "xirc2ps_cs"); | |
1556 | sprintf(info->bus_info, "PCMCIA 0x%lx", dev->base_addr); | |
1557 | } | |
1558 | ||
7282d491 | 1559 | static const struct ethtool_ops netdev_ethtool_ops = { |
1da177e4 LT |
1560 | .get_drvinfo = netdev_get_drvinfo, |
1561 | }; | |
1562 | ||
1563 | static int | |
1564 | do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) | |
1565 | { | |
1566 | local_info_t *local = netdev_priv(dev); | |
906da809 | 1567 | unsigned int ioaddr = dev->base_addr; |
1da177e4 LT |
1568 | u16 *data = (u16 *)&rq->ifr_ifru; |
1569 | ||
1570 | DEBUG(1, "%s: ioctl(%-.6s, %#04x) %04x %04x %04x %04x\n", | |
1571 | dev->name, rq->ifr_ifrn.ifrn_name, cmd, | |
1572 | data[0], data[1], data[2], data[3]); | |
1573 | ||
1574 | if (!local->mohawk) | |
1575 | return -EOPNOTSUPP; | |
1576 | ||
1577 | switch(cmd) { | |
1578 | case SIOCGMIIPHY: /* Get the address of the PHY in use. */ | |
1579 | data[0] = 0; /* we have only this address */ | |
93b1fae4 | 1580 | /* fall through */ |
1da177e4 LT |
1581 | case SIOCGMIIREG: /* Read the specified MII register. */ |
1582 | data[3] = mii_rd(ioaddr, data[0] & 0x1f, data[1] & 0x1f); | |
1583 | break; | |
1584 | case SIOCSMIIREG: /* Write the specified MII register */ | |
1585 | if (!capable(CAP_NET_ADMIN)) | |
1586 | return -EPERM; | |
1587 | mii_wr(ioaddr, data[0] & 0x1f, data[1] & 0x1f, data[2], 16); | |
1588 | break; | |
1589 | default: | |
1590 | return -EOPNOTSUPP; | |
1591 | } | |
1592 | return 0; | |
1593 | } | |
1594 | ||
1595 | static void | |
1596 | hardreset(struct net_device *dev) | |
1597 | { | |
1598 | local_info_t *local = netdev_priv(dev); | |
906da809 | 1599 | unsigned int ioaddr = dev->base_addr; |
1da177e4 LT |
1600 | |
1601 | SelectPage(4); | |
1602 | udelay(1); | |
1603 | PutByte(XIRCREG4_GPR1, 0); /* clear bit 0: power down */ | |
1604 | msleep(40); /* wait 40 msec */ | |
1605 | if (local->mohawk) | |
1606 | PutByte(XIRCREG4_GPR1, 1); /* set bit 0: power up */ | |
1607 | else | |
1608 | PutByte(XIRCREG4_GPR1, 1 | 4); /* set bit 0: power up, bit 2: AIC */ | |
1609 | msleep(20); /* wait 20 msec */ | |
1610 | } | |
1611 | ||
1612 | static void | |
1613 | do_reset(struct net_device *dev, int full) | |
1614 | { | |
1615 | local_info_t *local = netdev_priv(dev); | |
906da809 | 1616 | unsigned int ioaddr = dev->base_addr; |
1da177e4 LT |
1617 | unsigned value; |
1618 | ||
1619 | DEBUG(0, "%s: do_reset(%p,%d)\n", dev? dev->name:"eth?", dev, full); | |
1620 | ||
1621 | hardreset(dev); | |
1622 | PutByte(XIRCREG_CR, SoftReset); /* set */ | |
1623 | msleep(20); /* wait 20 msec */ | |
1624 | PutByte(XIRCREG_CR, 0); /* clear */ | |
1625 | msleep(40); /* wait 40 msec */ | |
1626 | if (local->mohawk) { | |
1627 | SelectPage(4); | |
1628 | /* set pin GP1 and GP2 to output (0x0c) | |
1629 | * set GP1 to low to power up the ML6692 (0x00) | |
1630 | * set GP2 to high to power up the 10Mhz chip (0x02) | |
1631 | */ | |
1632 | PutByte(XIRCREG4_GPR0, 0x0e); | |
1633 | } | |
1634 | ||
1635 | /* give the circuits some time to power up */ | |
1636 | msleep(500); /* about 500ms */ | |
1637 | ||
1638 | local->last_ptr_value = 0; | |
1639 | local->silicon = local->mohawk ? (GetByte(XIRCREG4_BOV) & 0x70) >> 4 | |
1640 | : (GetByte(XIRCREG4_BOV) & 0x30) >> 4; | |
1641 | ||
1642 | if (local->probe_port) { | |
1643 | if (!local->mohawk) { | |
1644 | SelectPage(4); | |
1645 | PutByte(XIRCREG4_GPR0, 4); | |
1646 | local->probe_port = 0; | |
1647 | } | |
1648 | } else if (dev->if_port == 2) { /* enable 10Base2 */ | |
1649 | SelectPage(0x42); | |
1650 | PutByte(XIRCREG42_SWC1, 0xC0); | |
1651 | } else { /* enable 10BaseT */ | |
1652 | SelectPage(0x42); | |
1653 | PutByte(XIRCREG42_SWC1, 0x80); | |
1654 | } | |
1655 | msleep(40); /* wait 40 msec to let it complete */ | |
1656 | ||
1657 | #ifdef PCMCIA_DEBUG | |
1658 | if (pc_debug) { | |
1659 | SelectPage(0); | |
1660 | value = GetByte(XIRCREG_ESR); /* read the ESR */ | |
1661 | printk(KERN_DEBUG "%s: ESR is: %#02x\n", dev->name, value); | |
1662 | } | |
1663 | #endif | |
1664 | ||
1665 | /* setup the ECR */ | |
1666 | SelectPage(1); | |
1667 | PutByte(XIRCREG1_IMR0, 0xff); /* allow all ints */ | |
1668 | PutByte(XIRCREG1_IMR1, 1 ); /* and Set TxUnderrunDetect */ | |
1669 | value = GetByte(XIRCREG1_ECR); | |
1670 | #if 0 | |
1671 | if (local->mohawk) | |
1672 | value |= DisableLinkPulse; | |
1673 | PutByte(XIRCREG1_ECR, value); | |
1674 | #endif | |
1675 | DEBUG(0, "%s: ECR is: %#02x\n", dev->name, value); | |
1676 | ||
1677 | SelectPage(0x42); | |
1678 | PutByte(XIRCREG42_SWC0, 0x20); /* disable source insertion */ | |
1679 | ||
1680 | if (local->silicon != 1) { | |
1681 | /* set the local memory dividing line. | |
1682 | * The comments in the sample code say that this is only | |
1683 | * settable with the scipper version 2 which is revision 0. | |
1684 | * Always for CE3 cards | |
1685 | */ | |
1686 | SelectPage(2); | |
1687 | PutWord(XIRCREG2_RBS, 0x2000); | |
1688 | } | |
1689 | ||
1690 | if (full) | |
1691 | set_addresses(dev); | |
1692 | ||
1693 | /* Hardware workaround: | |
1694 | * The receive byte pointer after reset is off by 1 so we need | |
1695 | * to move the offset pointer back to 0. | |
1696 | */ | |
1697 | SelectPage(0); | |
1698 | PutWord(XIRCREG0_DO, 0x2000); /* change offset command, off=0 */ | |
1699 | ||
1700 | /* setup MAC IMRs and clear status registers */ | |
1701 | SelectPage(0x40); /* Bit 7 ... bit 0 */ | |
1702 | PutByte(XIRCREG40_RMASK0, 0xff); /* ROK, RAB, rsv, RO, CRC, AE, PTL, MP */ | |
1703 | PutByte(XIRCREG40_TMASK0, 0xff); /* TOK, TAB, SQE, LL, TU, JAB, EXC, CRS */ | |
1704 | PutByte(XIRCREG40_TMASK1, 0xb0); /* rsv, rsv, PTD, EXT, rsv,rsv,rsv, rsv*/ | |
1705 | PutByte(XIRCREG40_RXST0, 0x00); /* ROK, RAB, REN, RO, CRC, AE, PTL, MP */ | |
1706 | PutByte(XIRCREG40_TXST0, 0x00); /* TOK, TAB, SQE, LL, TU, JAB, EXC, CRS */ | |
1707 | PutByte(XIRCREG40_TXST1, 0x00); /* TEN, rsv, PTD, EXT, retry_counter:4 */ | |
1708 | ||
1709 | if (full && local->mohawk && init_mii(dev)) { | |
1710 | if (dev->if_port == 4 || local->dingo || local->new_mii) { | |
1711 | printk(KERN_INFO "%s: MII selected\n", dev->name); | |
1712 | SelectPage(2); | |
1713 | PutByte(XIRCREG2_MSR, GetByte(XIRCREG2_MSR) | 0x08); | |
1714 | msleep(20); | |
1715 | } else { | |
1716 | printk(KERN_INFO "%s: MII detected; using 10mbs\n", | |
1717 | dev->name); | |
1718 | SelectPage(0x42); | |
1719 | if (dev->if_port == 2) /* enable 10Base2 */ | |
1720 | PutByte(XIRCREG42_SWC1, 0xC0); | |
1721 | else /* enable 10BaseT */ | |
1722 | PutByte(XIRCREG42_SWC1, 0x80); | |
1723 | msleep(40); /* wait 40 msec to let it complete */ | |
1724 | } | |
1725 | if (full_duplex) | |
1726 | PutByte(XIRCREG1_ECR, GetByte(XIRCREG1_ECR | FullDuplex)); | |
1727 | } else { /* No MII */ | |
1728 | SelectPage(0); | |
1729 | value = GetByte(XIRCREG_ESR); /* read the ESR */ | |
1730 | dev->if_port = (value & MediaSelect) ? 1 : 2; | |
1731 | } | |
1732 | ||
1733 | /* configure the LEDs */ | |
1734 | SelectPage(2); | |
1735 | if (dev->if_port == 1 || dev->if_port == 4) /* TP: Link and Activity */ | |
1736 | PutByte(XIRCREG2_LED, 0x3b); | |
1737 | else /* Coax: Not-Collision and Activity */ | |
1738 | PutByte(XIRCREG2_LED, 0x3a); | |
1739 | ||
1740 | if (local->dingo) | |
1741 | PutByte(0x0b, 0x04); /* 100 Mbit LED */ | |
1742 | ||
1743 | /* enable receiver and put the mac online */ | |
1744 | if (full) { | |
43fc63dc | 1745 | set_multicast_list(dev); |
1da177e4 LT |
1746 | SelectPage(0x40); |
1747 | PutByte(XIRCREG40_CMD0, EnableRecv | Online); | |
1748 | } | |
1749 | ||
1750 | /* setup Ethernet IMR and enable interrupts */ | |
1751 | SelectPage(1); | |
1752 | PutByte(XIRCREG1_IMR0, 0xff); | |
1753 | udelay(1); | |
1754 | SelectPage(0); | |
1755 | PutByte(XIRCREG_CR, EnableIntr); | |
1756 | if (local->modem && !local->dingo) { /* do some magic */ | |
1757 | if (!(GetByte(0x10) & 0x01)) | |
1758 | PutByte(0x10, 0x11); /* unmask master-int bit */ | |
1759 | } | |
1760 | ||
1761 | if (full) | |
1762 | printk(KERN_INFO "%s: media %s, silicon revision %d\n", | |
1763 | dev->name, if_names[dev->if_port], local->silicon); | |
1764 | /* We should switch back to page 0 to avoid a bug in revision 0 | |
1765 | * where regs with offset below 8 can't be read after an access | |
1766 | * to the MAC registers */ | |
1767 | SelectPage(0); | |
1768 | } | |
1769 | ||
1770 | /**************** | |
1771 | * Initialize the Media-Independent-Interface | |
1772 | * Returns: True if we have a good MII | |
1773 | */ | |
1774 | static int | |
1775 | init_mii(struct net_device *dev) | |
1776 | { | |
1777 | local_info_t *local = netdev_priv(dev); | |
906da809 | 1778 | unsigned int ioaddr = dev->base_addr; |
1da177e4 LT |
1779 | unsigned control, status, linkpartner; |
1780 | int i; | |
1781 | ||
1782 | if (if_port == 4 || if_port == 1) { /* force 100BaseT or 10BaseT */ | |
1783 | dev->if_port = if_port; | |
1784 | local->probe_port = 0; | |
1785 | return 1; | |
1786 | } | |
1787 | ||
1788 | status = mii_rd(ioaddr, 0, 1); | |
1789 | if ((status & 0xff00) != 0x7800) | |
1790 | return 0; /* No MII */ | |
1791 | ||
1792 | local->new_mii = (mii_rd(ioaddr, 0, 2) != 0xffff); | |
1793 | ||
1794 | if (local->probe_port) | |
1795 | control = 0x1000; /* auto neg */ | |
1796 | else if (dev->if_port == 4) | |
1797 | control = 0x2000; /* no auto neg, 100mbs mode */ | |
1798 | else | |
1799 | control = 0x0000; /* no auto neg, 10mbs mode */ | |
1800 | mii_wr(ioaddr, 0, 0, control, 16); | |
1801 | udelay(100); | |
1802 | control = mii_rd(ioaddr, 0, 0); | |
1803 | ||
1804 | if (control & 0x0400) { | |
1805 | printk(KERN_NOTICE "%s can't take PHY out of isolation mode\n", | |
1806 | dev->name); | |
1807 | local->probe_port = 0; | |
1808 | return 0; | |
1809 | } | |
1810 | ||
1811 | if (local->probe_port) { | |
1812 | /* according to the DP83840A specs the auto negotiation process | |
1813 | * may take up to 3.5 sec, so we use this also for our ML6692 | |
1814 | * Fixme: Better to use a timer here! | |
1815 | */ | |
1816 | for (i=0; i < 35; i++) { | |
1817 | msleep(100); /* wait 100 msec */ | |
1818 | status = mii_rd(ioaddr, 0, 1); | |
1819 | if ((status & 0x0020) && (status & 0x0004)) | |
1820 | break; | |
1821 | } | |
1822 | ||
1823 | if (!(status & 0x0020)) { | |
1824 | printk(KERN_INFO "%s: autonegotiation failed;" | |
1825 | " using 10mbs\n", dev->name); | |
1826 | if (!local->new_mii) { | |
1827 | control = 0x0000; | |
1828 | mii_wr(ioaddr, 0, 0, control, 16); | |
1829 | udelay(100); | |
1830 | SelectPage(0); | |
1831 | dev->if_port = (GetByte(XIRCREG_ESR) & MediaSelect) ? 1 : 2; | |
1832 | } | |
1833 | } else { | |
1834 | linkpartner = mii_rd(ioaddr, 0, 5); | |
1835 | printk(KERN_INFO "%s: MII link partner: %04x\n", | |
1836 | dev->name, linkpartner); | |
1837 | if (linkpartner & 0x0080) { | |
1838 | dev->if_port = 4; | |
1839 | } else | |
1840 | dev->if_port = 1; | |
1841 | } | |
1842 | } | |
1843 | ||
1844 | return 1; | |
1845 | } | |
1846 | ||
1847 | static void | |
1848 | do_powerdown(struct net_device *dev) | |
1849 | { | |
1850 | ||
906da809 | 1851 | unsigned int ioaddr = dev->base_addr; |
1da177e4 LT |
1852 | |
1853 | DEBUG(0, "do_powerdown(%p)\n", dev); | |
1854 | ||
1855 | SelectPage(4); | |
1856 | PutByte(XIRCREG4_GPR1, 0); /* clear bit 0: power down */ | |
1857 | SelectPage(0); | |
1858 | } | |
1859 | ||
1860 | static int | |
1861 | do_stop(struct net_device *dev) | |
1862 | { | |
906da809 | 1863 | unsigned int ioaddr = dev->base_addr; |
1da177e4 | 1864 | local_info_t *lp = netdev_priv(dev); |
fba395ee | 1865 | struct pcmcia_device *link = lp->p_dev; |
1da177e4 LT |
1866 | |
1867 | DEBUG(0, "do_stop(%p)\n", dev); | |
1868 | ||
1869 | if (!link) | |
1870 | return -ENODEV; | |
1871 | ||
1872 | netif_stop_queue(dev); | |
1873 | ||
1874 | SelectPage(0); | |
1875 | PutByte(XIRCREG_CR, 0); /* disable interrupts */ | |
1876 | SelectPage(0x01); | |
1877 | PutByte(XIRCREG1_IMR0, 0x00); /* forbid all ints */ | |
1878 | SelectPage(4); | |
1879 | PutByte(XIRCREG4_GPR1, 0); /* clear bit 0: power down */ | |
1880 | SelectPage(0); | |
1881 | ||
1882 | link->open--; | |
1883 | return 0; | |
1884 | } | |
1885 | ||
ff07bb19 DB |
1886 | static struct pcmcia_device_id xirc2ps_ids[] = { |
1887 | PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0089, 0x110a), | |
1888 | PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0138, 0x110a), | |
1889 | PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "CEM28", 0x2e3ee845, 0x0ea978ea), | |
1890 | PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "CEM33", 0x2e3ee845, 0x80609023), | |
1891 | PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "CEM56", 0x2e3ee845, 0xa650c32a), | |
1892 | PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "REM10", 0x2e3ee845, 0x76df1d29), | |
1893 | PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "XEM5600", 0x2e3ee845, 0xf1403719), | |
d277ad0e | 1894 | PCMCIA_PFC_DEVICE_PROD_ID12(0, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf), |
ff07bb19 DB |
1895 | PCMCIA_DEVICE_MANF_CARD(0x01bf, 0x010a), |
1896 | PCMCIA_DEVICE_PROD_ID13("Toshiba Information Systems", "TPCENET", 0x1b3b94fe, 0xf381c1a2), | |
1897 | PCMCIA_DEVICE_PROD_ID13("Xircom", "CE3-10/100", 0x2e3ee845, 0x0ec0ac37), | |
1898 | PCMCIA_DEVICE_PROD_ID13("Xircom", "PS-CE2-10", 0x2e3ee845, 0x947d9073), | |
1899 | PCMCIA_DEVICE_PROD_ID13("Xircom", "R2E-100BTX", 0x2e3ee845, 0x2464a6e3), | |
1900 | PCMCIA_DEVICE_PROD_ID13("Xircom", "RE-10", 0x2e3ee845, 0x3e08d609), | |
1901 | PCMCIA_DEVICE_PROD_ID13("Xircom", "XE2000", 0x2e3ee845, 0xf7188e46), | |
1902 | PCMCIA_DEVICE_PROD_ID12("Compaq", "Ethernet LAN Card", 0x54f7c49c, 0x9fd2f0a2), | |
1903 | PCMCIA_DEVICE_PROD_ID12("Compaq", "Netelligent 10/100 PC Card", 0x54f7c49c, 0xefe96769), | |
1904 | PCMCIA_DEVICE_PROD_ID12("Intel", "EtherExpress(TM) PRO/100 PC Card Mobile Adapter16", 0x816cc815, 0x174397db), | |
1905 | PCMCIA_DEVICE_PROD_ID12("Toshiba", "10/100 Ethernet PC Card", 0x44a09d9c, 0xb44deecf), | |
1906 | /* also matches CFE-10 cards! */ | |
1907 | /* PCMCIA_DEVICE_MANF_CARD(0x0105, 0x010a), */ | |
1908 | PCMCIA_DEVICE_NULL, | |
1909 | }; | |
1910 | MODULE_DEVICE_TABLE(pcmcia, xirc2ps_ids); | |
1911 | ||
1912 | ||
1da177e4 LT |
1913 | static struct pcmcia_driver xirc2ps_cs_driver = { |
1914 | .owner = THIS_MODULE, | |
1915 | .drv = { | |
1916 | .name = "xirc2ps_cs", | |
1917 | }, | |
15b99ac1 | 1918 | .probe = xirc2ps_probe, |
cc3b4866 | 1919 | .remove = xirc2ps_detach, |
ff07bb19 | 1920 | .id_table = xirc2ps_ids, |
98e4c28b DB |
1921 | .suspend = xirc2ps_suspend, |
1922 | .resume = xirc2ps_resume, | |
1da177e4 LT |
1923 | }; |
1924 | ||
1925 | static int __init | |
1926 | init_xirc2ps_cs(void) | |
1927 | { | |
1928 | return pcmcia_register_driver(&xirc2ps_cs_driver); | |
1929 | } | |
1930 | ||
1931 | static void __exit | |
1932 | exit_xirc2ps_cs(void) | |
1933 | { | |
1934 | pcmcia_unregister_driver(&xirc2ps_cs_driver); | |
1da177e4 LT |
1935 | } |
1936 | ||
1937 | module_init(init_xirc2ps_cs); | |
1938 | module_exit(exit_xirc2ps_cs); | |
1939 | ||
1940 | #ifndef MODULE | |
1941 | static int __init setup_xirc2ps_cs(char *str) | |
1942 | { | |
1943 | /* if_port, full_duplex, do_sound, lockup_hack | |
1944 | */ | |
1945 | int ints[10] = { -1 }; | |
1946 | ||
1947 | str = get_options(str, 9, ints); | |
1948 | ||
1949 | #define MAYBE_SET(X,Y) if (ints[0] >= Y && ints[Y] != -1) { X = ints[Y]; } | |
1950 | MAYBE_SET(if_port, 3); | |
1951 | MAYBE_SET(full_duplex, 4); | |
1952 | MAYBE_SET(do_sound, 5); | |
1953 | MAYBE_SET(lockup_hack, 6); | |
1954 | #undef MAYBE_SET | |
1955 | ||
9b41046c | 1956 | return 1; |
1da177e4 LT |
1957 | } |
1958 | ||
1959 | __setup("xirc2ps_cs=", setup_xirc2ps_cs); | |
1960 | #endif |