Commit | Line | Data |
---|---|---|
0ca7111a MU |
1 | /* |
2 | * drivers/net/phy/at803x.c | |
3 | * | |
4 | * Driver for Atheros 803x PHY | |
5 | * | |
6 | * Author: Matus Ujhelyi <ujhelyi.m@gmail.com> | |
7 | * | |
8 | * This program is free software; you can redistribute it and/or modify it | |
9 | * under the terms of the GNU General Public License as published by the | |
10 | * Free Software Foundation; either version 2 of the License, or (at your | |
11 | * option) any later version. | |
12 | */ | |
13 | ||
14 | #include <linux/phy.h> | |
15 | #include <linux/module.h> | |
16 | #include <linux/string.h> | |
17 | #include <linux/netdevice.h> | |
18 | #include <linux/etherdevice.h> | |
13a56b44 DM |
19 | #include <linux/of_gpio.h> |
20 | #include <linux/gpio/consumer.h> | |
0ca7111a MU |
21 | |
22 | #define AT803X_INTR_ENABLE 0x12 | |
23 | #define AT803X_INTR_STATUS 0x13 | |
13a56b44 DM |
24 | #define AT803X_SMART_SPEED 0x14 |
25 | #define AT803X_LED_CONTROL 0x18 | |
0ca7111a MU |
26 | #define AT803X_WOL_ENABLE 0x01 |
27 | #define AT803X_DEVICE_ADDR 0x03 | |
28 | #define AT803X_LOC_MAC_ADDR_0_15_OFFSET 0x804C | |
29 | #define AT803X_LOC_MAC_ADDR_16_31_OFFSET 0x804B | |
30 | #define AT803X_LOC_MAC_ADDR_32_47_OFFSET 0x804A | |
31 | #define AT803X_MMD_ACCESS_CONTROL 0x0D | |
32 | #define AT803X_MMD_ACCESS_CONTROL_DATA 0x0E | |
33 | #define AT803X_FUNC_DATA 0x4003 | |
77a99394 ZQ |
34 | #define AT803X_INER 0x0012 |
35 | #define AT803X_INER_INIT 0xec00 | |
36 | #define AT803X_INSR 0x0013 | |
1ca6d1b1 M |
37 | #define AT803X_DEBUG_ADDR 0x1D |
38 | #define AT803X_DEBUG_DATA 0x1E | |
39 | #define AT803X_DEBUG_SYSTEM_MODE_CTRL 0x05 | |
40 | #define AT803X_DEBUG_RGMII_TX_CLK_DLY BIT(8) | |
0ca7111a | 41 | |
bd8ca17f DM |
42 | #define ATH8030_PHY_ID 0x004dd076 |
43 | #define ATH8031_PHY_ID 0x004dd074 | |
44 | #define ATH8035_PHY_ID 0x004dd072 | |
45 | ||
0ca7111a MU |
46 | MODULE_DESCRIPTION("Atheros 803x PHY driver"); |
47 | MODULE_AUTHOR("Matus Ujhelyi"); | |
48 | MODULE_LICENSE("GPL"); | |
49 | ||
13a56b44 DM |
50 | struct at803x_priv { |
51 | bool phy_reset:1; | |
52 | struct gpio_desc *gpiod_reset; | |
53 | }; | |
54 | ||
55 | struct at803x_context { | |
56 | u16 bmcr; | |
57 | u16 advertise; | |
58 | u16 control1000; | |
59 | u16 int_enable; | |
60 | u16 smart_speed; | |
61 | u16 led_control; | |
62 | }; | |
63 | ||
64 | /* save relevant PHY registers to private copy */ | |
65 | static void at803x_context_save(struct phy_device *phydev, | |
66 | struct at803x_context *context) | |
67 | { | |
68 | context->bmcr = phy_read(phydev, MII_BMCR); | |
69 | context->advertise = phy_read(phydev, MII_ADVERTISE); | |
70 | context->control1000 = phy_read(phydev, MII_CTRL1000); | |
71 | context->int_enable = phy_read(phydev, AT803X_INTR_ENABLE); | |
72 | context->smart_speed = phy_read(phydev, AT803X_SMART_SPEED); | |
73 | context->led_control = phy_read(phydev, AT803X_LED_CONTROL); | |
74 | } | |
75 | ||
76 | /* restore relevant PHY registers from private copy */ | |
77 | static void at803x_context_restore(struct phy_device *phydev, | |
78 | const struct at803x_context *context) | |
79 | { | |
80 | phy_write(phydev, MII_BMCR, context->bmcr); | |
81 | phy_write(phydev, MII_ADVERTISE, context->advertise); | |
82 | phy_write(phydev, MII_CTRL1000, context->control1000); | |
83 | phy_write(phydev, AT803X_INTR_ENABLE, context->int_enable); | |
84 | phy_write(phydev, AT803X_SMART_SPEED, context->smart_speed); | |
85 | phy_write(phydev, AT803X_LED_CONTROL, context->led_control); | |
86 | } | |
87 | ||
ea13c9ee M |
88 | static int at803x_set_wol(struct phy_device *phydev, |
89 | struct ethtool_wolinfo *wol) | |
0ca7111a MU |
90 | { |
91 | struct net_device *ndev = phydev->attached_dev; | |
92 | const u8 *mac; | |
ea13c9ee M |
93 | int ret; |
94 | u32 value; | |
0ca7111a MU |
95 | unsigned int i, offsets[] = { |
96 | AT803X_LOC_MAC_ADDR_32_47_OFFSET, | |
97 | AT803X_LOC_MAC_ADDR_16_31_OFFSET, | |
98 | AT803X_LOC_MAC_ADDR_0_15_OFFSET, | |
99 | }; | |
100 | ||
101 | if (!ndev) | |
ea13c9ee | 102 | return -ENODEV; |
0ca7111a | 103 | |
ea13c9ee M |
104 | if (wol->wolopts & WAKE_MAGIC) { |
105 | mac = (const u8 *) ndev->dev_addr; | |
0ca7111a | 106 | |
ea13c9ee M |
107 | if (!is_valid_ether_addr(mac)) |
108 | return -EFAULT; | |
0ca7111a | 109 | |
ea13c9ee M |
110 | for (i = 0; i < 3; i++) { |
111 | phy_write(phydev, AT803X_MMD_ACCESS_CONTROL, | |
0ca7111a | 112 | AT803X_DEVICE_ADDR); |
ea13c9ee | 113 | phy_write(phydev, AT803X_MMD_ACCESS_CONTROL_DATA, |
0ca7111a | 114 | offsets[i]); |
ea13c9ee | 115 | phy_write(phydev, AT803X_MMD_ACCESS_CONTROL, |
0ca7111a | 116 | AT803X_FUNC_DATA); |
ea13c9ee | 117 | phy_write(phydev, AT803X_MMD_ACCESS_CONTROL_DATA, |
0ca7111a | 118 | mac[(i * 2) + 1] | (mac[(i * 2)] << 8)); |
ea13c9ee M |
119 | } |
120 | ||
121 | value = phy_read(phydev, AT803X_INTR_ENABLE); | |
122 | value |= AT803X_WOL_ENABLE; | |
123 | ret = phy_write(phydev, AT803X_INTR_ENABLE, value); | |
124 | if (ret) | |
125 | return ret; | |
126 | value = phy_read(phydev, AT803X_INTR_STATUS); | |
127 | } else { | |
128 | value = phy_read(phydev, AT803X_INTR_ENABLE); | |
129 | value &= (~AT803X_WOL_ENABLE); | |
130 | ret = phy_write(phydev, AT803X_INTR_ENABLE, value); | |
131 | if (ret) | |
132 | return ret; | |
133 | value = phy_read(phydev, AT803X_INTR_STATUS); | |
0ca7111a | 134 | } |
ea13c9ee M |
135 | |
136 | return ret; | |
137 | } | |
138 | ||
139 | static void at803x_get_wol(struct phy_device *phydev, | |
140 | struct ethtool_wolinfo *wol) | |
141 | { | |
142 | u32 value; | |
143 | ||
144 | wol->supported = WAKE_MAGIC; | |
145 | wol->wolopts = 0; | |
146 | ||
147 | value = phy_read(phydev, AT803X_INTR_ENABLE); | |
148 | if (value & AT803X_WOL_ENABLE) | |
149 | wol->wolopts |= WAKE_MAGIC; | |
0ca7111a MU |
150 | } |
151 | ||
6229ed1f DM |
152 | static int at803x_suspend(struct phy_device *phydev) |
153 | { | |
154 | int value; | |
155 | int wol_enabled; | |
156 | ||
157 | mutex_lock(&phydev->lock); | |
158 | ||
159 | value = phy_read(phydev, AT803X_INTR_ENABLE); | |
160 | wol_enabled = value & AT803X_WOL_ENABLE; | |
161 | ||
162 | value = phy_read(phydev, MII_BMCR); | |
163 | ||
164 | if (wol_enabled) | |
165 | value |= BMCR_ISOLATE; | |
166 | else | |
167 | value |= BMCR_PDOWN; | |
168 | ||
169 | phy_write(phydev, MII_BMCR, value); | |
170 | ||
171 | mutex_unlock(&phydev->lock); | |
172 | ||
173 | return 0; | |
174 | } | |
175 | ||
176 | static int at803x_resume(struct phy_device *phydev) | |
177 | { | |
178 | int value; | |
179 | ||
180 | mutex_lock(&phydev->lock); | |
181 | ||
182 | value = phy_read(phydev, MII_BMCR); | |
183 | value &= ~(BMCR_PDOWN | BMCR_ISOLATE); | |
184 | phy_write(phydev, MII_BMCR, value); | |
185 | ||
186 | mutex_unlock(&phydev->lock); | |
187 | ||
188 | return 0; | |
189 | } | |
190 | ||
13a56b44 DM |
191 | static int at803x_probe(struct phy_device *phydev) |
192 | { | |
193 | struct device *dev = &phydev->dev; | |
194 | struct at803x_priv *priv; | |
687908c2 | 195 | struct gpio_desc *gpiod_reset; |
13a56b44 | 196 | |
8f2877ca | 197 | priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); |
13a56b44 DM |
198 | if (!priv) |
199 | return -ENOMEM; | |
200 | ||
687908c2 UKK |
201 | gpiod_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); |
202 | if (IS_ERR(gpiod_reset)) | |
203 | return PTR_ERR(gpiod_reset); | |
204 | ||
205 | priv->gpiod_reset = gpiod_reset; | |
13a56b44 DM |
206 | |
207 | phydev->priv = priv; | |
208 | ||
209 | return 0; | |
210 | } | |
211 | ||
0ca7111a MU |
212 | static int at803x_config_init(struct phy_device *phydev) |
213 | { | |
1ca6d1b1 | 214 | int ret; |
0ca7111a | 215 | |
6ff01dbb DM |
216 | ret = genphy_config_init(phydev); |
217 | if (ret < 0) | |
218 | return ret; | |
0ca7111a | 219 | |
1ca6d1b1 M |
220 | if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) { |
221 | ret = phy_write(phydev, AT803X_DEBUG_ADDR, | |
222 | AT803X_DEBUG_SYSTEM_MODE_CTRL); | |
223 | if (ret) | |
224 | return ret; | |
225 | ret = phy_write(phydev, AT803X_DEBUG_DATA, | |
226 | AT803X_DEBUG_RGMII_TX_CLK_DLY); | |
227 | if (ret) | |
228 | return ret; | |
229 | } | |
230 | ||
0ca7111a MU |
231 | return 0; |
232 | } | |
233 | ||
77a99394 ZQ |
234 | static int at803x_ack_interrupt(struct phy_device *phydev) |
235 | { | |
236 | int err; | |
237 | ||
238 | err = phy_read(phydev, AT803X_INSR); | |
239 | ||
240 | return (err < 0) ? err : 0; | |
241 | } | |
242 | ||
243 | static int at803x_config_intr(struct phy_device *phydev) | |
244 | { | |
245 | int err; | |
246 | int value; | |
247 | ||
248 | value = phy_read(phydev, AT803X_INER); | |
249 | ||
250 | if (phydev->interrupts == PHY_INTERRUPT_ENABLED) | |
251 | err = phy_write(phydev, AT803X_INER, | |
252 | value | AT803X_INER_INIT); | |
253 | else | |
254 | err = phy_write(phydev, AT803X_INER, 0); | |
255 | ||
256 | return err; | |
257 | } | |
258 | ||
13a56b44 DM |
259 | static void at803x_link_change_notify(struct phy_device *phydev) |
260 | { | |
261 | struct at803x_priv *priv = phydev->priv; | |
262 | ||
263 | /* | |
264 | * Conduct a hardware reset for AT8030 every time a link loss is | |
265 | * signalled. This is necessary to circumvent a hardware bug that | |
266 | * occurs when the cable is unplugged while TX packets are pending | |
267 | * in the FIFO. In such cases, the FIFO enters an error mode it | |
268 | * cannot recover from by software. | |
269 | */ | |
270 | if (phydev->drv->phy_id == ATH8030_PHY_ID) { | |
271 | if (phydev->state == PHY_NOLINK) { | |
272 | if (priv->gpiod_reset && !priv->phy_reset) { | |
273 | struct at803x_context context; | |
274 | ||
275 | at803x_context_save(phydev, &context); | |
276 | ||
277 | gpiod_set_value(priv->gpiod_reset, 0); | |
278 | msleep(1); | |
279 | gpiod_set_value(priv->gpiod_reset, 1); | |
280 | msleep(1); | |
281 | ||
282 | at803x_context_restore(phydev, &context); | |
283 | ||
284 | dev_dbg(&phydev->dev, "%s(): phy was reset\n", | |
285 | __func__); | |
286 | priv->phy_reset = true; | |
287 | } | |
288 | } else { | |
289 | priv->phy_reset = false; | |
290 | } | |
291 | } | |
292 | } | |
293 | ||
317420ab M |
294 | static struct phy_driver at803x_driver[] = { |
295 | { | |
296 | /* ATHEROS 8035 */ | |
13a56b44 DM |
297 | .phy_id = ATH8035_PHY_ID, |
298 | .name = "Atheros 8035 ethernet", | |
299 | .phy_id_mask = 0xffffffef, | |
300 | .probe = at803x_probe, | |
301 | .config_init = at803x_config_init, | |
302 | .link_change_notify = at803x_link_change_notify, | |
303 | .set_wol = at803x_set_wol, | |
304 | .get_wol = at803x_get_wol, | |
305 | .suspend = at803x_suspend, | |
306 | .resume = at803x_resume, | |
307 | .features = PHY_GBIT_FEATURES, | |
308 | .flags = PHY_HAS_INTERRUPT, | |
309 | .config_aneg = genphy_config_aneg, | |
310 | .read_status = genphy_read_status, | |
311 | .driver = { | |
0ca7111a MU |
312 | .owner = THIS_MODULE, |
313 | }, | |
317420ab M |
314 | }, { |
315 | /* ATHEROS 8030 */ | |
13a56b44 DM |
316 | .phy_id = ATH8030_PHY_ID, |
317 | .name = "Atheros 8030 ethernet", | |
318 | .phy_id_mask = 0xffffffef, | |
319 | .probe = at803x_probe, | |
320 | .config_init = at803x_config_init, | |
321 | .link_change_notify = at803x_link_change_notify, | |
322 | .set_wol = at803x_set_wol, | |
323 | .get_wol = at803x_get_wol, | |
324 | .suspend = at803x_suspend, | |
325 | .resume = at803x_resume, | |
326 | .features = PHY_GBIT_FEATURES, | |
327 | .flags = PHY_HAS_INTERRUPT, | |
328 | .config_aneg = genphy_config_aneg, | |
329 | .read_status = genphy_read_status, | |
330 | .driver = { | |
0ca7111a MU |
331 | .owner = THIS_MODULE, |
332 | }, | |
05d7cce8 M |
333 | }, { |
334 | /* ATHEROS 8031 */ | |
13a56b44 DM |
335 | .phy_id = ATH8031_PHY_ID, |
336 | .name = "Atheros 8031 ethernet", | |
337 | .phy_id_mask = 0xffffffef, | |
338 | .probe = at803x_probe, | |
339 | .config_init = at803x_config_init, | |
340 | .link_change_notify = at803x_link_change_notify, | |
341 | .set_wol = at803x_set_wol, | |
342 | .get_wol = at803x_get_wol, | |
343 | .suspend = at803x_suspend, | |
344 | .resume = at803x_resume, | |
345 | .features = PHY_GBIT_FEATURES, | |
346 | .flags = PHY_HAS_INTERRUPT, | |
347 | .config_aneg = genphy_config_aneg, | |
348 | .read_status = genphy_read_status, | |
349 | .ack_interrupt = &at803x_ack_interrupt, | |
350 | .config_intr = &at803x_config_intr, | |
351 | .driver = { | |
05d7cce8 M |
352 | .owner = THIS_MODULE, |
353 | }, | |
317420ab | 354 | } }; |
0ca7111a | 355 | |
50fd7150 | 356 | module_phy_driver(at803x_driver); |
0ca7111a MU |
357 | |
358 | static struct mdio_device_id __maybe_unused atheros_tbl[] = { | |
bd8ca17f DM |
359 | { ATH8030_PHY_ID, 0xffffffef }, |
360 | { ATH8031_PHY_ID, 0xffffffef }, | |
361 | { ATH8035_PHY_ID, 0xffffffef }, | |
0ca7111a MU |
362 | { } |
363 | }; | |
364 | ||
365 | MODULE_DEVICE_TABLE(mdio, atheros_tbl); |