Commit | Line | Data |
---|---|---|
d0507009 DC |
1 | /* |
2 | * drivers/net/phy/micrel.c | |
3 | * | |
4 | * Driver for Micrel PHYs | |
5 | * | |
6 | * Author: David J. Choi | |
7 | * | |
7ab59dc1 | 8 | * Copyright (c) 2010-2013 Micrel, Inc. |
d0507009 DC |
9 | * |
10 | * This program is free software; you can redistribute it and/or modify it | |
11 | * under the terms of the GNU General Public License as published by the | |
12 | * Free Software Foundation; either version 2 of the License, or (at your | |
13 | * option) any later version. | |
14 | * | |
7ab59dc1 DC |
15 | * Support : Micrel Phys: |
16 | * Giga phys: ksz9021, ksz9031 | |
17 | * 100/10 Phys : ksz8001, ksz8721, ksz8737, ksz8041 | |
18 | * ksz8021, ksz8031, ksz8051, | |
19 | * ksz8081, ksz8091, | |
20 | * ksz8061, | |
21 | * Switch : ksz8873, ksz886x | |
d0507009 DC |
22 | */ |
23 | ||
24 | #include <linux/kernel.h> | |
25 | #include <linux/module.h> | |
26 | #include <linux/phy.h> | |
d606ef3f | 27 | #include <linux/micrel_phy.h> |
d0507009 | 28 | |
212ea99a MV |
29 | /* Operation Mode Strap Override */ |
30 | #define MII_KSZPHY_OMSO 0x16 | |
31 | #define KSZPHY_OMSO_B_CAST_OFF (1 << 9) | |
32 | #define KSZPHY_OMSO_RMII_OVERRIDE (1 << 1) | |
33 | #define KSZPHY_OMSO_MII_OVERRIDE (1 << 0) | |
34 | ||
51f932c4 CD |
35 | /* general Interrupt control/status reg in vendor specific block. */ |
36 | #define MII_KSZPHY_INTCS 0x1B | |
37 | #define KSZPHY_INTCS_JABBER (1 << 15) | |
38 | #define KSZPHY_INTCS_RECEIVE_ERR (1 << 14) | |
39 | #define KSZPHY_INTCS_PAGE_RECEIVE (1 << 13) | |
40 | #define KSZPHY_INTCS_PARELLEL (1 << 12) | |
41 | #define KSZPHY_INTCS_LINK_PARTNER_ACK (1 << 11) | |
42 | #define KSZPHY_INTCS_LINK_DOWN (1 << 10) | |
43 | #define KSZPHY_INTCS_REMOTE_FAULT (1 << 9) | |
44 | #define KSZPHY_INTCS_LINK_UP (1 << 8) | |
45 | #define KSZPHY_INTCS_ALL (KSZPHY_INTCS_LINK_UP |\ | |
46 | KSZPHY_INTCS_LINK_DOWN) | |
47 | ||
48 | /* general PHY control reg in vendor specific block. */ | |
49 | #define MII_KSZPHY_CTRL 0x1F | |
50 | /* bitmap of PHY register to set interrupt mode */ | |
51 | #define KSZPHY_CTRL_INT_ACTIVE_HIGH (1 << 9) | |
52 | #define KSZ9021_CTRL_INT_ACTIVE_HIGH (1 << 14) | |
53 | #define KS8737_CTRL_INT_ACTIVE_HIGH (1 << 14) | |
d606ef3f | 54 | #define KSZ8051_RMII_50MHZ_CLK (1 << 7) |
51f932c4 | 55 | |
b6bb4dfc HP |
56 | static int ksz_config_flags(struct phy_device *phydev) |
57 | { | |
58 | int regval; | |
59 | ||
60 | if (phydev->dev_flags & MICREL_PHY_50MHZ_CLK) { | |
61 | regval = phy_read(phydev, MII_KSZPHY_CTRL); | |
62 | regval |= KSZ8051_RMII_50MHZ_CLK; | |
63 | return phy_write(phydev, MII_KSZPHY_CTRL, regval); | |
64 | } | |
65 | return 0; | |
66 | } | |
67 | ||
51f932c4 CD |
68 | static int kszphy_ack_interrupt(struct phy_device *phydev) |
69 | { | |
70 | /* bit[7..0] int status, which is a read and clear register. */ | |
71 | int rc; | |
72 | ||
73 | rc = phy_read(phydev, MII_KSZPHY_INTCS); | |
74 | ||
75 | return (rc < 0) ? rc : 0; | |
76 | } | |
77 | ||
78 | static int kszphy_set_interrupt(struct phy_device *phydev) | |
79 | { | |
80 | int temp; | |
81 | temp = (PHY_INTERRUPT_ENABLED == phydev->interrupts) ? | |
82 | KSZPHY_INTCS_ALL : 0; | |
83 | return phy_write(phydev, MII_KSZPHY_INTCS, temp); | |
84 | } | |
85 | ||
86 | static int kszphy_config_intr(struct phy_device *phydev) | |
87 | { | |
88 | int temp, rc; | |
89 | ||
90 | /* set the interrupt pin active low */ | |
91 | temp = phy_read(phydev, MII_KSZPHY_CTRL); | |
92 | temp &= ~KSZPHY_CTRL_INT_ACTIVE_HIGH; | |
93 | phy_write(phydev, MII_KSZPHY_CTRL, temp); | |
94 | rc = kszphy_set_interrupt(phydev); | |
95 | return rc < 0 ? rc : 0; | |
96 | } | |
97 | ||
98 | static int ksz9021_config_intr(struct phy_device *phydev) | |
99 | { | |
100 | int temp, rc; | |
101 | ||
102 | /* set the interrupt pin active low */ | |
103 | temp = phy_read(phydev, MII_KSZPHY_CTRL); | |
104 | temp &= ~KSZ9021_CTRL_INT_ACTIVE_HIGH; | |
105 | phy_write(phydev, MII_KSZPHY_CTRL, temp); | |
106 | rc = kszphy_set_interrupt(phydev); | |
107 | return rc < 0 ? rc : 0; | |
108 | } | |
109 | ||
110 | static int ks8737_config_intr(struct phy_device *phydev) | |
111 | { | |
112 | int temp, rc; | |
113 | ||
114 | /* set the interrupt pin active low */ | |
115 | temp = phy_read(phydev, MII_KSZPHY_CTRL); | |
116 | temp &= ~KS8737_CTRL_INT_ACTIVE_HIGH; | |
117 | phy_write(phydev, MII_KSZPHY_CTRL, temp); | |
118 | rc = kszphy_set_interrupt(phydev); | |
119 | return rc < 0 ? rc : 0; | |
120 | } | |
d0507009 DC |
121 | |
122 | static int kszphy_config_init(struct phy_device *phydev) | |
123 | { | |
124 | return 0; | |
125 | } | |
126 | ||
212ea99a MV |
127 | static int ksz8021_config_init(struct phy_device *phydev) |
128 | { | |
b6bb4dfc | 129 | int rc; |
212ea99a MV |
130 | const u16 val = KSZPHY_OMSO_B_CAST_OFF | KSZPHY_OMSO_RMII_OVERRIDE; |
131 | phy_write(phydev, MII_KSZPHY_OMSO, val); | |
b6bb4dfc HP |
132 | rc = ksz_config_flags(phydev); |
133 | return rc < 0 ? rc : 0; | |
212ea99a MV |
134 | } |
135 | ||
d606ef3f BS |
136 | static int ks8051_config_init(struct phy_device *phydev) |
137 | { | |
b6bb4dfc | 138 | int rc; |
d606ef3f | 139 | |
b6bb4dfc HP |
140 | rc = ksz_config_flags(phydev); |
141 | return rc < 0 ? rc : 0; | |
d606ef3f BS |
142 | } |
143 | ||
93272e07 JCPV |
144 | #define KSZ8873MLL_GLOBAL_CONTROL_4 0x06 |
145 | #define KSZ8873MLL_GLOBAL_CONTROL_4_DUPLEX (1 << 6) | |
146 | #define KSZ8873MLL_GLOBAL_CONTROL_4_SPEED (1 << 4) | |
147 | int ksz8873mll_read_status(struct phy_device *phydev) | |
148 | { | |
149 | int regval; | |
150 | ||
151 | /* dummy read */ | |
152 | regval = phy_read(phydev, KSZ8873MLL_GLOBAL_CONTROL_4); | |
153 | ||
154 | regval = phy_read(phydev, KSZ8873MLL_GLOBAL_CONTROL_4); | |
155 | ||
156 | if (regval & KSZ8873MLL_GLOBAL_CONTROL_4_DUPLEX) | |
157 | phydev->duplex = DUPLEX_HALF; | |
158 | else | |
159 | phydev->duplex = DUPLEX_FULL; | |
160 | ||
161 | if (regval & KSZ8873MLL_GLOBAL_CONTROL_4_SPEED) | |
162 | phydev->speed = SPEED_10; | |
163 | else | |
164 | phydev->speed = SPEED_100; | |
165 | ||
166 | phydev->link = 1; | |
167 | phydev->pause = phydev->asym_pause = 0; | |
168 | ||
169 | return 0; | |
170 | } | |
171 | ||
172 | static int ksz8873mll_config_aneg(struct phy_device *phydev) | |
173 | { | |
174 | return 0; | |
175 | } | |
176 | ||
d5bf9071 CH |
177 | static struct phy_driver ksphy_driver[] = { |
178 | { | |
51f932c4 CD |
179 | .phy_id = PHY_ID_KS8737, |
180 | .phy_id_mask = 0x00fffff0, | |
181 | .name = "Micrel KS8737", | |
182 | .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause), | |
183 | .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, | |
184 | .config_init = kszphy_config_init, | |
185 | .config_aneg = genphy_config_aneg, | |
186 | .read_status = genphy_read_status, | |
187 | .ack_interrupt = kszphy_ack_interrupt, | |
188 | .config_intr = ks8737_config_intr, | |
189 | .driver = { .owner = THIS_MODULE,}, | |
212ea99a MV |
190 | }, { |
191 | .phy_id = PHY_ID_KSZ8021, | |
192 | .phy_id_mask = 0x00ffffff, | |
7ab59dc1 | 193 | .name = "Micrel KSZ8021 or KSZ8031", |
212ea99a MV |
194 | .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause | |
195 | SUPPORTED_Asym_Pause), | |
196 | .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, | |
197 | .config_init = ksz8021_config_init, | |
198 | .config_aneg = genphy_config_aneg, | |
199 | .read_status = genphy_read_status, | |
200 | .ack_interrupt = kszphy_ack_interrupt, | |
201 | .config_intr = kszphy_config_intr, | |
202 | .driver = { .owner = THIS_MODULE,}, | |
b818d1a7 HP |
203 | }, { |
204 | .phy_id = PHY_ID_KSZ8031, | |
205 | .phy_id_mask = 0x00ffffff, | |
206 | .name = "Micrel KSZ8031", | |
207 | .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause | | |
208 | SUPPORTED_Asym_Pause), | |
209 | .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, | |
210 | .config_init = ksz8021_config_init, | |
211 | .config_aneg = genphy_config_aneg, | |
212 | .read_status = genphy_read_status, | |
213 | .ack_interrupt = kszphy_ack_interrupt, | |
214 | .config_intr = kszphy_config_intr, | |
215 | .driver = { .owner = THIS_MODULE,}, | |
d5bf9071 | 216 | }, { |
510d573f | 217 | .phy_id = PHY_ID_KSZ8041, |
51f932c4 | 218 | .phy_id_mask = 0x00fffff0, |
510d573f | 219 | .name = "Micrel KSZ8041", |
51f932c4 CD |
220 | .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause |
221 | | SUPPORTED_Asym_Pause), | |
222 | .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, | |
223 | .config_init = kszphy_config_init, | |
224 | .config_aneg = genphy_config_aneg, | |
225 | .read_status = genphy_read_status, | |
226 | .ack_interrupt = kszphy_ack_interrupt, | |
227 | .config_intr = kszphy_config_intr, | |
228 | .driver = { .owner = THIS_MODULE,}, | |
d5bf9071 | 229 | }, { |
510d573f | 230 | .phy_id = PHY_ID_KSZ8051, |
d0507009 | 231 | .phy_id_mask = 0x00fffff0, |
510d573f | 232 | .name = "Micrel KSZ8051", |
51f932c4 CD |
233 | .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause |
234 | | SUPPORTED_Asym_Pause), | |
235 | .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, | |
d606ef3f | 236 | .config_init = ks8051_config_init, |
d0507009 DC |
237 | .config_aneg = genphy_config_aneg, |
238 | .read_status = genphy_read_status, | |
51f932c4 CD |
239 | .ack_interrupt = kszphy_ack_interrupt, |
240 | .config_intr = kszphy_config_intr, | |
d0507009 | 241 | .driver = { .owner = THIS_MODULE,}, |
d5bf9071 | 242 | }, { |
510d573f MV |
243 | .phy_id = PHY_ID_KSZ8001, |
244 | .name = "Micrel KSZ8001 or KS8721", | |
48d7d0ad | 245 | .phy_id_mask = 0x00ffffff, |
51f932c4 CD |
246 | .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause), |
247 | .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, | |
d0507009 DC |
248 | .config_init = kszphy_config_init, |
249 | .config_aneg = genphy_config_aneg, | |
250 | .read_status = genphy_read_status, | |
51f932c4 CD |
251 | .ack_interrupt = kszphy_ack_interrupt, |
252 | .config_intr = kszphy_config_intr, | |
d0507009 | 253 | .driver = { .owner = THIS_MODULE,}, |
7ab59dc1 DC |
254 | }, { |
255 | .phy_id = PHY_ID_KSZ8081, | |
256 | .name = "Micrel KSZ8081 or KSZ8091", | |
257 | .phy_id_mask = 0x00fffff0, | |
258 | .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause), | |
259 | .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, | |
260 | .config_init = kszphy_config_init, | |
261 | .config_aneg = genphy_config_aneg, | |
262 | .read_status = genphy_read_status, | |
263 | .ack_interrupt = kszphy_ack_interrupt, | |
264 | .config_intr = kszphy_config_intr, | |
265 | .driver = { .owner = THIS_MODULE,}, | |
266 | }, { | |
267 | .phy_id = PHY_ID_KSZ8061, | |
268 | .name = "Micrel KSZ8061", | |
269 | .phy_id_mask = 0x00fffff0, | |
270 | .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause), | |
271 | .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, | |
272 | .config_init = kszphy_config_init, | |
273 | .config_aneg = genphy_config_aneg, | |
274 | .read_status = genphy_read_status, | |
275 | .ack_interrupt = kszphy_ack_interrupt, | |
276 | .config_intr = kszphy_config_intr, | |
277 | .driver = { .owner = THIS_MODULE,}, | |
d5bf9071 | 278 | }, { |
d0507009 | 279 | .phy_id = PHY_ID_KSZ9021, |
48d7d0ad | 280 | .phy_id_mask = 0x000ffffe, |
d0507009 | 281 | .name = "Micrel KSZ9021 Gigabit PHY", |
32fcafbc | 282 | .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause), |
51f932c4 | 283 | .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, |
d0507009 DC |
284 | .config_init = kszphy_config_init, |
285 | .config_aneg = genphy_config_aneg, | |
286 | .read_status = genphy_read_status, | |
51f932c4 CD |
287 | .ack_interrupt = kszphy_ack_interrupt, |
288 | .config_intr = ksz9021_config_intr, | |
d0507009 | 289 | .driver = { .owner = THIS_MODULE, }, |
7ab59dc1 DC |
290 | }, { |
291 | .phy_id = PHY_ID_KSZ9031, | |
292 | .phy_id_mask = 0x00fffff0, | |
293 | .name = "Micrel KSZ9031 Gigabit PHY", | |
294 | .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause | |
295 | | SUPPORTED_Asym_Pause), | |
296 | .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, | |
297 | .config_init = kszphy_config_init, | |
298 | .config_aneg = genphy_config_aneg, | |
299 | .read_status = genphy_read_status, | |
300 | .ack_interrupt = kszphy_ack_interrupt, | |
301 | .config_intr = ksz9021_config_intr, | |
302 | .driver = { .owner = THIS_MODULE, }, | |
93272e07 JCPV |
303 | }, { |
304 | .phy_id = PHY_ID_KSZ8873MLL, | |
305 | .phy_id_mask = 0x00fffff0, | |
306 | .name = "Micrel KSZ8873MLL Switch", | |
307 | .features = (SUPPORTED_Pause | SUPPORTED_Asym_Pause), | |
308 | .flags = PHY_HAS_MAGICANEG, | |
309 | .config_init = kszphy_config_init, | |
310 | .config_aneg = ksz8873mll_config_aneg, | |
311 | .read_status = ksz8873mll_read_status, | |
312 | .driver = { .owner = THIS_MODULE, }, | |
7ab59dc1 DC |
313 | }, { |
314 | .phy_id = PHY_ID_KSZ886X, | |
315 | .phy_id_mask = 0x00fffff0, | |
316 | .name = "Micrel KSZ886X Switch", | |
317 | .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause), | |
318 | .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, | |
319 | .config_init = kszphy_config_init, | |
320 | .config_aneg = genphy_config_aneg, | |
321 | .read_status = genphy_read_status, | |
322 | .driver = { .owner = THIS_MODULE, }, | |
d5bf9071 | 323 | } }; |
d0507009 DC |
324 | |
325 | static int __init ksphy_init(void) | |
326 | { | |
d5bf9071 CH |
327 | return phy_drivers_register(ksphy_driver, |
328 | ARRAY_SIZE(ksphy_driver)); | |
d0507009 DC |
329 | } |
330 | ||
331 | static void __exit ksphy_exit(void) | |
332 | { | |
d5bf9071 CH |
333 | phy_drivers_unregister(ksphy_driver, |
334 | ARRAY_SIZE(ksphy_driver)); | |
d0507009 DC |
335 | } |
336 | ||
337 | module_init(ksphy_init); | |
338 | module_exit(ksphy_exit); | |
339 | ||
340 | MODULE_DESCRIPTION("Micrel PHY driver"); | |
341 | MODULE_AUTHOR("David J. Choi"); | |
342 | MODULE_LICENSE("GPL"); | |
52a60ed2 | 343 | |
cf93c945 | 344 | static struct mdio_device_id __maybe_unused micrel_tbl[] = { |
48d7d0ad | 345 | { PHY_ID_KSZ9021, 0x000ffffe }, |
7ab59dc1 | 346 | { PHY_ID_KSZ9031, 0x00fffff0 }, |
510d573f | 347 | { PHY_ID_KSZ8001, 0x00ffffff }, |
51f932c4 | 348 | { PHY_ID_KS8737, 0x00fffff0 }, |
212ea99a | 349 | { PHY_ID_KSZ8021, 0x00ffffff }, |
b818d1a7 | 350 | { PHY_ID_KSZ8031, 0x00ffffff }, |
510d573f MV |
351 | { PHY_ID_KSZ8041, 0x00fffff0 }, |
352 | { PHY_ID_KSZ8051, 0x00fffff0 }, | |
7ab59dc1 DC |
353 | { PHY_ID_KSZ8061, 0x00fffff0 }, |
354 | { PHY_ID_KSZ8081, 0x00fffff0 }, | |
93272e07 | 355 | { PHY_ID_KSZ8873MLL, 0x00fffff0 }, |
7ab59dc1 | 356 | { PHY_ID_KSZ886X, 0x00fffff0 }, |
52a60ed2 DM |
357 | { } |
358 | }; | |
359 | ||
360 | MODULE_DEVICE_TABLE(mdio, micrel_tbl); |