Commit | Line | Data |
---|---|---|
8ceee660 BH |
1 | /**************************************************************************** |
2 | * Driver for Solarflare Solarstorm network controllers and boards | |
3 | * Copyright 2006-2008 Solarflare Communications Inc. | |
4 | * | |
5 | * This program is free software; you can redistribute it and/or modify it | |
6 | * under the terms of the GNU General Public License version 2 as published | |
7 | * by the Free Software Foundation, incorporated herein by reference. | |
8 | */ | |
9 | /* | |
b37b62fe | 10 | * Driver for AMCC QT202x SFP+ and XFP adapters; see www.amcc.com for details |
8ceee660 BH |
11 | */ |
12 | ||
13 | #include <linux/timer.h> | |
14 | #include <linux/delay.h> | |
15 | #include "efx.h" | |
8ceee660 | 16 | #include "mdio_10g.h" |
8ceee660 | 17 | #include "phy.h" |
177dfcd8 | 18 | #include "falcon.h" |
8ceee660 | 19 | |
b37b62fe BH |
20 | #define QT202X_REQUIRED_DEVS (MDIO_DEVS_PCS | \ |
21 | MDIO_DEVS_PMAPMD | \ | |
22 | MDIO_DEVS_PHYXS) | |
8ceee660 | 23 | |
b37b62fe BH |
24 | #define QT202X_LOOPBACKS ((1 << LOOPBACK_PCS) | \ |
25 | (1 << LOOPBACK_PMAPMD) | \ | |
26 | (1 << LOOPBACK_NETWORK)) | |
3273c2e8 | 27 | |
8ceee660 BH |
28 | /****************************************************************************/ |
29 | /* Quake-specific MDIO registers */ | |
30 | #define MDIO_QUAKE_LED0_REG (0xD006) | |
31 | ||
d2d2c373 BH |
32 | /* QT2025C only */ |
33 | #define PCS_FW_HEARTBEAT_REG 0xd7ee | |
34 | #define PCS_FW_HEARTB_LBN 0 | |
35 | #define PCS_FW_HEARTB_WIDTH 8 | |
36 | #define PCS_UC8051_STATUS_REG 0xd7fd | |
37 | #define PCS_UC_STATUS_LBN 0 | |
38 | #define PCS_UC_STATUS_WIDTH 8 | |
39 | #define PCS_UC_STATUS_FW_SAVE 0x20 | |
40 | #define PMA_PMD_FTX_CTRL2_REG 0xc309 | |
41 | #define PMA_PMD_FTX_STATIC_LBN 13 | |
42 | #define PMA_PMD_VEND1_REG 0xc001 | |
43 | #define PMA_PMD_VEND1_LBTXD_LBN 15 | |
44 | #define PCS_VEND1_REG 0xc000 | |
45 | #define PCS_VEND1_LBTXD_LBN 5 | |
46 | ||
b37b62fe | 47 | void falcon_qt202x_set_led(struct efx_nic *p, int led, int mode) |
8ceee660 BH |
48 | { |
49 | int addr = MDIO_QUAKE_LED0_REG + led; | |
68e7f45e | 50 | efx_mdio_write(p, MDIO_MMD_PMAPMD, addr, mode); |
8ceee660 BH |
51 | } |
52 | ||
b37b62fe | 53 | struct qt202x_phy_data { |
f8b87c17 | 54 | enum efx_phy_mode phy_mode; |
3273c2e8 BH |
55 | }; |
56 | ||
b37b62fe BH |
57 | #define QT2022C2_MAX_RESET_TIME 500 |
58 | #define QT2022C2_RESET_WAIT 10 | |
8ceee660 | 59 | |
d2d2c373 BH |
60 | static int qt2025c_wait_reset(struct efx_nic *efx) |
61 | { | |
62 | unsigned long timeout = jiffies + 10 * HZ; | |
d2d2c373 BH |
63 | int reg, old_counter = 0; |
64 | ||
65 | /* Wait for firmware heartbeat to start */ | |
66 | for (;;) { | |
67 | int counter; | |
68e7f45e | 68 | reg = efx_mdio_read(efx, MDIO_MMD_PCS, PCS_FW_HEARTBEAT_REG); |
d2d2c373 BH |
69 | if (reg < 0) |
70 | return reg; | |
71 | counter = ((reg >> PCS_FW_HEARTB_LBN) & | |
72 | ((1 << PCS_FW_HEARTB_WIDTH) - 1)); | |
73 | if (old_counter == 0) | |
74 | old_counter = counter; | |
75 | else if (counter != old_counter) | |
76 | break; | |
77 | if (time_after(jiffies, timeout)) | |
78 | return -ETIMEDOUT; | |
79 | msleep(10); | |
80 | } | |
81 | ||
82 | /* Wait for firmware status to look good */ | |
83 | for (;;) { | |
68e7f45e | 84 | reg = efx_mdio_read(efx, MDIO_MMD_PCS, PCS_UC8051_STATUS_REG); |
d2d2c373 BH |
85 | if (reg < 0) |
86 | return reg; | |
87 | if ((reg & | |
88 | ((1 << PCS_UC_STATUS_WIDTH) - 1) << PCS_UC_STATUS_LBN) >= | |
89 | PCS_UC_STATUS_FW_SAVE) | |
90 | break; | |
91 | if (time_after(jiffies, timeout)) | |
92 | return -ETIMEDOUT; | |
93 | msleep(100); | |
94 | } | |
95 | ||
96 | return 0; | |
97 | } | |
98 | ||
b37b62fe | 99 | static int qt202x_reset_phy(struct efx_nic *efx) |
8ceee660 BH |
100 | { |
101 | int rc; | |
102 | ||
d2d2c373 | 103 | if (efx->phy_type == PHY_TYPE_QT2025C) { |
5afaa753 BH |
104 | /* Wait for the reset triggered by falcon_reset_hw() |
105 | * to complete */ | |
d2d2c373 BH |
106 | rc = qt2025c_wait_reset(efx); |
107 | if (rc < 0) | |
108 | goto fail; | |
5afaa753 BH |
109 | } else { |
110 | /* Reset the PHYXS MMD. This is documented as doing | |
111 | * a complete soft reset. */ | |
112 | rc = efx_mdio_reset_mmd(efx, MDIO_MMD_PHYXS, | |
b37b62fe BH |
113 | QT2022C2_MAX_RESET_TIME / |
114 | QT2022C2_RESET_WAIT, | |
115 | QT2022C2_RESET_WAIT); | |
5afaa753 BH |
116 | if (rc < 0) |
117 | goto fail; | |
d2d2c373 BH |
118 | } |
119 | ||
8ceee660 BH |
120 | /* Wait 250ms for the PHY to complete bootup */ |
121 | msleep(250); | |
122 | ||
123 | /* Check that all the MMDs we expect are present and responding. We | |
124 | * expect faults on some if the link is down, but not on the PHY XS */ | |
b37b62fe | 125 | rc = efx_mdio_check_mmds(efx, QT202X_REQUIRED_DEVS, MDIO_DEVS_PHYXS); |
8ceee660 BH |
126 | if (rc < 0) |
127 | goto fail; | |
128 | ||
44838a44 | 129 | falcon_board(efx)->type->init_phy(efx); |
8ceee660 BH |
130 | |
131 | return rc; | |
132 | ||
133 | fail: | |
f794fd44 | 134 | EFX_ERR(efx, "PHY reset timed out\n"); |
8ceee660 BH |
135 | return rc; |
136 | } | |
137 | ||
b37b62fe | 138 | static int qt202x_phy_init(struct efx_nic *efx) |
8ceee660 | 139 | { |
b37b62fe | 140 | struct qt202x_phy_data *phy_data; |
47c3d19f | 141 | u32 devid; |
8ceee660 BH |
142 | int rc; |
143 | ||
47c3d19f SH |
144 | rc = qt202x_reset_phy(efx); |
145 | if (rc) { | |
146 | EFX_ERR(efx, "PHY init failed\n"); | |
147 | return rc; | |
148 | } | |
149 | ||
b37b62fe | 150 | phy_data = kzalloc(sizeof(struct qt202x_phy_data), GFP_KERNEL); |
9b7bfc4c BH |
151 | if (!phy_data) |
152 | return -ENOMEM; | |
d3208b5e | 153 | efx->phy_data = phy_data; |
3273c2e8 | 154 | |
47c3d19f | 155 | devid = efx_mdio_read_id(efx, MDIO_MMD_PHYXS); |
3f39a5e9 | 156 | EFX_INFO(efx, "PHY ID reg %x (OUI %06x model %02x revision %x)\n", |
68e7f45e BH |
157 | devid, efx_mdio_id_oui(devid), efx_mdio_id_model(devid), |
158 | efx_mdio_id_rev(devid)); | |
8ceee660 | 159 | |
f8b87c17 | 160 | phy_data->phy_mode = efx->phy_mode; |
3273c2e8 | 161 | return 0; |
8ceee660 BH |
162 | } |
163 | ||
b37b62fe | 164 | static int qt202x_link_ok(struct efx_nic *efx) |
8ceee660 | 165 | { |
b37b62fe | 166 | return efx_mdio_links_ok(efx, QT202X_REQUIRED_DEVS); |
8ceee660 BH |
167 | } |
168 | ||
fdaa9aed | 169 | static bool qt202x_phy_poll(struct efx_nic *efx) |
8ceee660 | 170 | { |
fdaa9aed SH |
171 | bool was_up = efx->link_state.up; |
172 | ||
173 | efx->link_state.up = qt202x_link_ok(efx); | |
174 | efx->link_state.speed = 10000; | |
175 | efx->link_state.fd = true; | |
176 | efx->link_state.fc = efx->wanted_fc; | |
177 | ||
178 | return efx->link_state.up != was_up; | |
8ceee660 BH |
179 | } |
180 | ||
d3245b28 | 181 | static int qt202x_phy_reconfigure(struct efx_nic *efx) |
8ceee660 | 182 | { |
b37b62fe | 183 | struct qt202x_phy_data *phy_data = efx->phy_data; |
3273c2e8 | 184 | |
d2d2c373 BH |
185 | if (efx->phy_type == PHY_TYPE_QT2025C) { |
186 | /* There are several different register bits which can | |
187 | * disable TX (and save power) on direct-attach cables | |
188 | * or optical transceivers, varying somewhat between | |
189 | * firmware versions. Only 'static mode' appears to | |
190 | * cover everything. */ | |
68e7f45e BH |
191 | mdio_set_flag( |
192 | &efx->mdio, efx->mdio.prtad, MDIO_MMD_PMAPMD, | |
193 | PMA_PMD_FTX_CTRL2_REG, 1 << PMA_PMD_FTX_STATIC_LBN, | |
d2d2c373 BH |
194 | efx->phy_mode & PHY_MODE_TX_DISABLED || |
195 | efx->phy_mode & PHY_MODE_LOW_POWER || | |
196 | efx->loopback_mode == LOOPBACK_PCS || | |
197 | efx->loopback_mode == LOOPBACK_PMAPMD); | |
198 | } else { | |
199 | /* Reset the PHY when moving from tx off to tx on */ | |
200 | if (!(efx->phy_mode & PHY_MODE_TX_DISABLED) && | |
201 | (phy_data->phy_mode & PHY_MODE_TX_DISABLED)) | |
b37b62fe | 202 | qt202x_reset_phy(efx); |
d2d2c373 | 203 | |
68e7f45e | 204 | efx_mdio_transmit_disable(efx); |
d2d2c373 | 205 | } |
3273c2e8 | 206 | |
68e7f45e | 207 | efx_mdio_phy_reconfigure(efx); |
3273c2e8 | 208 | |
f8b87c17 | 209 | phy_data->phy_mode = efx->phy_mode; |
d3245b28 BH |
210 | |
211 | return 0; | |
8ceee660 BH |
212 | } |
213 | ||
b37b62fe | 214 | static void qt202x_phy_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd) |
68e7f45e BH |
215 | { |
216 | mdio45_ethtool_gset(&efx->mdio, ecmd); | |
217 | } | |
8ceee660 | 218 | |
b37b62fe | 219 | static void qt202x_phy_fini(struct efx_nic *efx) |
8ceee660 | 220 | { |
3273c2e8 BH |
221 | /* Free the context block */ |
222 | kfree(efx->phy_data); | |
223 | efx->phy_data = NULL; | |
8ceee660 BH |
224 | } |
225 | ||
b37b62fe | 226 | struct efx_phy_operations falcon_qt202x_phy_ops = { |
177dfcd8 | 227 | .macs = EFX_XMAC, |
b37b62fe BH |
228 | .init = qt202x_phy_init, |
229 | .reconfigure = qt202x_phy_reconfigure, | |
230 | .poll = qt202x_phy_poll, | |
231 | .fini = qt202x_phy_fini, | |
b37b62fe | 232 | .get_settings = qt202x_phy_get_settings, |
68e7f45e | 233 | .set_settings = efx_mdio_set_settings, |
b37b62fe BH |
234 | .mmds = QT202X_REQUIRED_DEVS, |
235 | .loopbacks = QT202X_LOOPBACKS, | |
8ceee660 | 236 | }; |