[deliverable/linux.git] / drivers / net / wan / pci200syn.c

/*
 * Goramo PCI200SYN synchronous serial card driver for Linux
 *
 * Copyright (C) 2002-2008 Krzysztof Halasa <khc@pm.waw.pl>
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of version 2 of the GNU General Public License
 * as published by the Free Software Foundation.
 *
 * For information see <http://www.kernel.org/pub/linux/utils/net/hdlc/>
 *
 * Sources of information:
 *    Hitachi HD64572 SCA-II User's Manual
 *    PLX Technology Inc. PCI9052 Data Book
 */

#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/capability.h>
#include <linux/slab.h>
#include <linux/types.h>
#include <linux/fcntl.h>
#include <linux/in.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/moduleparam.h>
#include <linux/netdevice.h>
#include <linux/hdlc.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <asm/io.h>

#include "hd64572.h"

#undef DEBUG_PKT
#define DEBUG_RINGS

#define PCI200SYN_PLX_SIZE	0x80	/* PLX control window size (128b) */
#define PCI200SYN_SCA_SIZE	0x400	/* SCA window size (1Kb) */
#define MAX_TX_BUFFERS		10

static int pci_clock_freq = 33000000;
#define CLOCK_BASE pci_clock_freq

/*
 *      PLX PCI9052 local configuration and shared runtime registers.
 *      This structure can be used to access 9052 registers (memory mapped).
 */
typedef struct {
	u32 loc_addr_range[4];	/* 00-0Ch : Local Address Ranges */
	u32 loc_rom_range;	/* 10h : Local ROM Range */
	u32 loc_addr_base[4];	/* 14-20h : Local Address Base Addrs */
	u32 loc_rom_base;	/* 24h : Local ROM Base */
	u32 loc_bus_descr[4];	/* 28-34h : Local Bus Descriptors */
	u32 rom_bus_descr;	/* 38h : ROM Bus Descriptor */
	u32 cs_base[4];		/* 3C-48h : Chip Select Base Addrs */
	u32 intr_ctrl_stat;	/* 4Ch : Interrupt Control/Status */
	u32 init_ctrl;		/* 50h : EEPROM ctrl, Init Ctrl, etc */
}plx9052;


typedef struct port_s {
	struct napi_struct napi;
	struct net_device *netdev;
	struct card_s *card;
	spinlock_t lock;	/* TX lock */
	sync_serial_settings settings;
	int rxpart;		/* partial frame received, next frame invalid*/
	unsigned short encoding;
	unsigned short parity;
	u16 rxin;		/* rx ring buffer 'in' pointer */
	u16 txin;		/* tx ring buffer 'in' and 'last' pointers */
	u16 txlast;
	u8 rxs, txs, tmc;	/* SCA registers */
	u8 chan;		/* physical port # - 0 or 1 */
}port_t;


typedef struct card_s {
	u8 __iomem *rambase;	/* buffer memory base (virtual) */
	u8 __iomem *scabase;	/* SCA memory base (virtual) */
	plx9052 __iomem *plxbase;/* PLX registers memory base (virtual) */
	u16 rx_ring_buffers;	/* number of buffers in a ring */
	u16 tx_ring_buffers;
	u16 buff_offset;	/* offset of first buffer of first channel */
	u8 irq;			/* interrupt request level */

	port_t ports[2];
}card_t;


#define get_port(card, port)	     (&card->ports[port])
#define sca_flush(card)		     (sca_in(IER0, card));

static inline void new_memcpy_toio(char __iomem *dest, char *src, int length)
{
	int len;
	do {
		len = length > 256 ? 256 : length;
		memcpy_toio(dest, src, len);
		dest += len;
		src += len;
		length -= len;
		readb(dest);
	} while (len);
}

#undef memcpy_toio
#define memcpy_toio new_memcpy_toio

#include "hd64572.c"


static void pci200_set_iface(port_t *port)
{
	card_t *card = port->card;
	u16 msci = get_msci(port);
	u8 rxs = port->rxs & CLK_BRG_MASK;
	u8 txs = port->txs & CLK_BRG_MASK;

	sca_out(EXS_TES1, (port->chan ? MSCI1_OFFSET : MSCI0_OFFSET) + EXS,
		port->card);
	switch(port->settings.clock_type) {
	case CLOCK_INT:
		rxs |= CLK_BRG; /* BRG output */
		txs |= CLK_PIN_OUT | CLK_TX_RXCLK; /* RX clock */
		break;

	case CLOCK_TXINT:
		rxs |= CLK_LINE; /* RXC input */
		txs |= CLK_PIN_OUT | CLK_BRG; /* BRG output */
		break;

	case CLOCK_TXFROMRX:
		rxs |= CLK_LINE; /* RXC input */
		txs |= CLK_PIN_OUT | CLK_TX_RXCLK; /* RX clock */
		break;

	default:		/* EXTernal clock */
		rxs |= CLK_LINE; /* RXC input */
		txs |= CLK_PIN_OUT | CLK_LINE; /* TXC input */
		break;
	}

	port->rxs = rxs;
	port->txs = txs;
	sca_out(rxs, msci + RXS, card);
	sca_out(txs, msci + TXS, card);
	sca_set_port(port);
}


static int pci200_open(struct net_device *dev)
{
	port_t *port = dev_to_port(dev);

	int result = hdlc_open(dev);
	if (result)
		return result;

	sca_open(dev);
	pci200_set_iface(port);
	sca_flush(port->card);
	return 0;
}


static int pci200_close(struct net_device *dev)
{
	sca_close(dev);
	sca_flush(dev_to_port(dev)->card);
	hdlc_close(dev);
	return 0;
}


static int pci200_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
{
	const size_t size = sizeof(sync_serial_settings);
	sync_serial_settings new_line;
	sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
	port_t *port = dev_to_port(dev);

#ifdef DEBUG_RINGS
	if (cmd == SIOCDEVPRIVATE) {
		sca_dump_rings(dev);
		return 0;
	}
#endif
	if (cmd != SIOCWANDEV)
		return hdlc_ioctl(dev, ifr, cmd);

	switch(ifr->ifr_settings.type) {
	case IF_GET_IFACE:
		ifr->ifr_settings.type = IF_IFACE_V35;
		if (ifr->ifr_settings.size < size) {
			ifr->ifr_settings.size = size; /* data size wanted */
			return -ENOBUFS;
		}
		if (copy_to_user(line, &port->settings, size))
			return -EFAULT;
		return 0;

	case IF_IFACE_V35:
	case IF_IFACE_SYNC_SERIAL:
		if (!capable(CAP_NET_ADMIN))
			return -EPERM;

		if (copy_from_user(&new_line, line, size))
			return -EFAULT;

		if (new_line.clock_type != CLOCK_EXT &&
		    new_line.clock_type != CLOCK_TXFROMRX &&
		    new_line.clock_type != CLOCK_INT &&
		    new_line.clock_type != CLOCK_TXINT)
		return -EINVAL;	/* No such clock setting */

		if (new_line.loopback != 0 && new_line.loopback != 1)
			return -EINVAL;

		memcpy(&port->settings, &new_line, size); /* Update settings */
		pci200_set_iface(port);
		sca_flush(port->card);
		return 0;

	default:
		return hdlc_ioctl(dev, ifr, cmd);
	}
}


static void pci200_pci_remove_one(struct pci_dev *pdev)
{
	int i;
	card_t *card = pci_get_drvdata(pdev);

	for (i = 0; i < 2; i++)
		if (card->ports[i].card)
			unregister_hdlc_device(card->ports[i].netdev);

	if (card->irq)
		free_irq(card->irq, card);

	if (card->rambase)
		iounmap(card->rambase);
	if (card->scabase)
		iounmap(card->scabase);
	if (card->plxbase)
		iounmap(card->plxbase);

	pci_release_regions(pdev);
	pci_disable_device(pdev);
	pci_set_drvdata(pdev, NULL);
	if (card->ports[0].netdev)
		free_netdev(card->ports[0].netdev);
	if (card->ports[1].netdev)
		free_netdev(card->ports[1].netdev);
	kfree(card);
}

static const struct net_device_ops pci200_ops = {
	.ndo_open       = pci200_open,
	.ndo_stop       = pci200_close,
	.ndo_change_mtu = hdlc_change_mtu,
	.ndo_start_xmit = hdlc_start_xmit,
	.ndo_do_ioctl   = pci200_ioctl,
};

static int __devinit pci200_pci_init_one(struct pci_dev *pdev,
					 const struct pci_device_id *ent)
{
	card_t *card;
	u32 __iomem *p;
	int i;
	u32 ramsize;
	u32 ramphys;		/* buffer memory base */
	u32 scaphys;		/* SCA memory base */
	u32 plxphys;		/* PLX registers memory base */

	i = pci_enable_device(pdev);
	if (i)
		return i;

	i = pci_request_regions(pdev, "PCI200SYN");
	if (i) {
		pci_disable_device(pdev);
		return i;
	}

	card = kzalloc(sizeof(card_t), GFP_KERNEL);
	if (card == NULL) {
		printk(KERN_ERR "pci200syn: unable to allocate memory\n");
		pci_release_regions(pdev);
		pci_disable_device(pdev);
		return -ENOBUFS;
	}
	pci_set_drvdata(pdev, card);
	card->ports[0].netdev = alloc_hdlcdev(&card->ports[0]);
	card->ports[1].netdev = alloc_hdlcdev(&card->ports[1]);
	if (!card->ports[0].netdev || !card->ports[1].netdev) {
		printk(KERN_ERR "pci200syn: unable to allocate memory\n");
		pci200_pci_remove_one(pdev);
		return -ENOMEM;
	}

	if (pci_resource_len(pdev, 0) != PCI200SYN_PLX_SIZE ||
	    pci_resource_len(pdev, 2) != PCI200SYN_SCA_SIZE ||
	    pci_resource_len(pdev, 3) < 16384) {
		printk(KERN_ERR "pci200syn: invalid card EEPROM parameters\n");
		pci200_pci_remove_one(pdev);
		return -EFAULT;
	}

	plxphys = pci_resource_start(pdev,0) & PCI_BASE_ADDRESS_MEM_MASK;
	card->plxbase = ioremap(plxphys, PCI200SYN_PLX_SIZE);

	scaphys = pci_resource_start(pdev,2) & PCI_BASE_ADDRESS_MEM_MASK;
	card->scabase = ioremap(scaphys, PCI200SYN_SCA_SIZE);

	ramphys = pci_resource_start(pdev,3) & PCI_BASE_ADDRESS_MEM_MASK;
	card->rambase = pci_ioremap_bar(pdev, 3);

	if (card->plxbase == NULL ||
	    card->scabase == NULL ||
	    card->rambase == NULL) {
		printk(KERN_ERR "pci200syn: ioremap() failed\n");
		pci200_pci_remove_one(pdev);
		return -EFAULT;
	}

	/* Reset PLX */
	p = &card->plxbase->init_ctrl;
	writel(readl(p) | 0x40000000, p);
	readl(p);		/* Flush the write - do not use sca_flush */
	udelay(1);

	writel(readl(p) & ~0x40000000, p);
	readl(p);		/* Flush the write - do not use sca_flush */
	udelay(1);

	ramsize = sca_detect_ram(card, card->rambase,
				 pci_resource_len(pdev, 3));

	/* number of TX + RX buffers for one port - this is dual port card */
	i = ramsize / (2 * (sizeof(pkt_desc) + HDLC_MAX_MRU));
	card->tx_ring_buffers = min(i / 2, MAX_TX_BUFFERS);
	card->rx_ring_buffers = i - card->tx_ring_buffers;

	card->buff_offset = 2 * sizeof(pkt_desc) * (card->tx_ring_buffers +
						    card->rx_ring_buffers);

	printk(KERN_INFO "pci200syn: %u KB RAM at 0x%x, IRQ%u, using %u TX +"
	       " %u RX packets rings\n", ramsize / 1024, ramphys,
	       pdev->irq, card->tx_ring_buffers, card->rx_ring_buffers);

	if (card->tx_ring_buffers < 1) {
		printk(KERN_ERR "pci200syn: RAM test failed\n");
		pci200_pci_remove_one(pdev);
		return -EFAULT;
	}

	/* Enable interrupts on the PCI bridge */
	p = &card->plxbase->intr_ctrl_stat;
	writew(readw(p) | 0x0040, p);

	/* Allocate IRQ */
	if (request_irq(pdev->irq, sca_intr, IRQF_SHARED, "pci200syn", card)) {
		printk(KERN_WARNING "pci200syn: could not allocate IRQ%d.\n",
		       pdev->irq);
		pci200_pci_remove_one(pdev);
		return -EBUSY;
	}
	card->irq = pdev->irq;

	sca_init(card, 0);

	for (i = 0; i < 2; i++) {
		port_t *port = &card->ports[i];
		struct net_device *dev = port->netdev;
		hdlc_device *hdlc = dev_to_hdlc(dev);
		port->chan = i;

		spin_lock_init(&port->lock);
		dev->irq = card->irq;
		dev->mem_start = ramphys;
		dev->mem_end = ramphys + ramsize - 1;
		dev->tx_queue_len = 50;
		dev->netdev_ops = &pci200_ops;
		hdlc->attach = sca_attach;
		hdlc->xmit = sca_xmit;
		port->settings.clock_type = CLOCK_EXT;
		port->card = card;
		sca_init_port(port);
		if (register_hdlc_device(dev)) {
			printk(KERN_ERR "pci200syn: unable to register hdlc "
			       "device\n");
			port->card = NULL;
			pci200_pci_remove_one(pdev);
			return -ENOBUFS;
		}

		printk(KERN_INFO "%s: PCI200SYN channel %d\n",
		       dev->name, port->chan);
	}

	sca_flush(card);
	return 0;
}


static struct pci_device_id pci200_pci_tbl[] __devinitdata = {
	{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, PCI_VENDOR_ID_PLX,
	  PCI_DEVICE_ID_PLX_PCI200SYN, 0, 0, 0 },
	{ 0, }
};


static struct pci_driver pci200_pci_driver = {
	.name		= "PCI200SYN",
	.id_table	= pci200_pci_tbl,
	.probe		= pci200_pci_init_one,
	.remove		= pci200_pci_remove_one,
};


static int __init pci200_init_module(void)
{
	if (pci_clock_freq < 1000000 || pci_clock_freq > 80000000) {
		printk(KERN_ERR "pci200syn: Invalid PCI clock frequency\n");
		return -EINVAL;
	}
	return pci_register_driver(&pci200_pci_driver);
}


static void __exit pci200_cleanup_module(void)
{
	pci_unregister_driver(&pci200_pci_driver);
}

MODULE_AUTHOR("Krzysztof Halasa <khc@pm.waw.pl>");
MODULE_DESCRIPTION("Goramo PCI200SYN serial port driver");
MODULE_LICENSE("GPL v2");
MODULE_DEVICE_TABLE(pci, pci200_pci_tbl);
module_param(pci_clock_freq, int, 0444);
MODULE_PARM_DESC(pci_clock_freq, "System PCI clock frequency in Hz");
module_init(pci200_init_module);
module_exit(pci200_cleanup_module);
Commit	Line	Data
1da177e4 LT	1	/*
	2	* Goramo PCI200SYN synchronous serial card driver for Linux
	3	*
61e0a6a2	4	* Copyright (C) 2002-2008 Krzysztof Halasa <khc@pm.waw.pl>
1da177e4 LT	5	*
	6	* This program is free software; you can redistribute it and/or modify it
	7	* under the terms of version 2 of the GNU General Public License
	8	* as published by the Free Software Foundation.
	9	*
467c432a	10	* For information see <http://www.kernel.org/pub/linux/utils/net/hdlc/>
1da177e4 LT	11	*
	12	* Sources of information:
	13	* Hitachi HD64572 SCA-II User's Manual
	14	* PLX Technology Inc. PCI9052 Data Book
	15	*/
	16
	17	#include <linux/module.h>
	18	#include <linux/kernel.h>
86ae13b0	19	#include <linux/capability.h>
1da177e4	20	#include <linux/slab.h>
1da177e4 LT	21	#include <linux/types.h>
	22	#include <linux/fcntl.h>
	23	#include <linux/in.h>
	24	#include <linux/string.h>
	25	#include <linux/errno.h>
	26	#include <linux/init.h>
	27	#include <linux/ioport.h>
	28	#include <linux/moduleparam.h>
	29	#include <linux/netdevice.h>
	30	#include <linux/hdlc.h>
	31	#include <linux/pci.h>
164006da	32	#include <linux/delay.h>
1da177e4 LT	33	#include <asm/io.h>
	34
	35	#include "hd64572.h"
	36
1da177e4 LT	37	#undef DEBUG_PKT
	38	#define DEBUG_RINGS
	39
	40	#define PCI200SYN_PLX_SIZE 0x80 /* PLX control window size (128b) */
	41	#define PCI200SYN_SCA_SIZE 0x400 /* SCA window size (1Kb) */
1da177e4 LT	42	#define MAX_TX_BUFFERS 10
	43
	44	static int pci_clock_freq = 33000000;
	45	#define CLOCK_BASE pci_clock_freq
	46
1da177e4 LT	47	/*
	48	* PLX PCI9052 local configuration and shared runtime registers.
	49	* This structure can be used to access 9052 registers (memory mapped).
	50	*/
	51	typedef struct {
	52	u32 loc_addr_range[4]; /* 00-0Ch : Local Address Ranges */
	53	u32 loc_rom_range; /* 10h : Local ROM Range */
	54	u32 loc_addr_base[4]; /* 14-20h : Local Address Base Addrs */
	55	u32 loc_rom_base; /* 24h : Local ROM Base */
	56	u32 loc_bus_descr[4]; /* 28-34h : Local Bus Descriptors */
	57	u32 rom_bus_descr; /* 38h : ROM Bus Descriptor */
	58	u32 cs_base[4]; /* 3C-48h : Chip Select Base Addrs */
	59	u32 intr_ctrl_stat; /* 4Ch : Interrupt Control/Status */
	60	u32 init_ctrl; /* 50h : EEPROM ctrl, Init Ctrl, etc */
	61	}plx9052;
	62
	63
	64
	65	typedef struct port_s {
abc9d91a	66	struct napi_struct napi;
61e0a6a2	67	struct net_device *netdev;
1da177e4 LT	68	struct card_s *card;
	69	spinlock_t lock; /* TX lock */
	70	sync_serial_settings settings;
	71	int rxpart; /* partial frame received, next frame invalid*/
	72	unsigned short encoding;
	73	unsigned short parity;
	74	u16 rxin; /* rx ring buffer 'in' pointer */
	75	u16 txin; /* tx ring buffer 'in' and 'last' pointers */
	76	u16 txlast;
	77	u8 rxs, txs, tmc; /* SCA registers */
61e0a6a2	78	u8 chan; /* physical port # - 0 or 1 */
1da177e4 LT	79	}port_t;
	80
	81
	82
	83	typedef struct card_s {
	84	u8 __iomem rambase; / buffer memory base (virtual) */
	85	u8 __iomem scabase; / SCA memory base (virtual) */
	86	plx9052 __iomem plxbase;/ PLX registers memory base (virtual) */
	87	u16 rx_ring_buffers; /* number of buffers in a ring */
	88	u16 tx_ring_buffers;
	89	u16 buff_offset; /* offset of first buffer of first channel */
	90	u8 irq; /* interrupt request level */
	91
	92	port_t ports[2];
	93	}card_t;
	94
	95
1da177e4 LT	96	#define get_port(card, port) (&card->ports[port])
	97	#define sca_flush(card) (sca_in(IER0, card));
	98
	99	static inline void new_memcpy_toio(char __iomem dest, char src, int length)
	100	{
	101	int len;
	102	do {
	103	len = length > 256 ? 256 : length;
	104	memcpy_toio(dest, src, len);
	105	dest += len;
	106	src += len;
	107	length -= len;
	108	readb(dest);
	109	} while (len);
	110	}
	111
	112	#undef memcpy_toio
	113	#define memcpy_toio new_memcpy_toio
	114
6b40aba3	115	#include "hd64572.c"
1da177e4 LT	116
	117
	118	static void pci200_set_iface(port_t *port)
	119	{
	120	card_t *card = port->card;
	121	u16 msci = get_msci(port);
	122	u8 rxs = port->rxs & CLK_BRG_MASK;
	123	u8 txs = port->txs & CLK_BRG_MASK;
	124
61e0a6a2 KH	125	sca_out(EXS_TES1, (port->chan ? MSCI1_OFFSET : MSCI0_OFFSET) + EXS,
61e0a6a2 KH	126	port->card);
1da177e4 LT	127	switch(port->settings.clock_type) {
	128	case CLOCK_INT:
	129	rxs \|= CLK_BRG; /* BRG output */
	130	txs \|= CLK_PIN_OUT \| CLK_TX_RXCLK; /* RX clock */
	131	break;
	132
	133	case CLOCK_TXINT:
	134	rxs \|= CLK_LINE; /* RXC input */
	135	txs \|= CLK_PIN_OUT \| CLK_BRG; /* BRG output */
	136	break;
	137
	138	case CLOCK_TXFROMRX:
	139	rxs \|= CLK_LINE; /* RXC input */
	140	txs \|= CLK_PIN_OUT \| CLK_TX_RXCLK; /* RX clock */
	141	break;
	142
	143	default: /* EXTernal clock */
	144	rxs \|= CLK_LINE; /* RXC input */
	145	txs \|= CLK_PIN_OUT \| CLK_LINE; /* TXC input */
	146	break;
	147	}
	148
	149	port->rxs = rxs;
	150	port->txs = txs;
	151	sca_out(rxs, msci + RXS, card);
	152	sca_out(txs, msci + TXS, card);
	153	sca_set_port(port);
	154	}
	155
	156
	157
	158	static int pci200_open(struct net_device *dev)
	159	{
	160	port_t *port = dev_to_port(dev);
	161
	162	int result = hdlc_open(dev);
	163	if (result)
	164	return result;
	165
	166	sca_open(dev);
	167	pci200_set_iface(port);
61e0a6a2	168	sca_flush(port->card);
1da177e4 LT	169	return 0;
	170	}
	171
	172
	173
	174	static int pci200_close(struct net_device *dev)
	175	{
	176	sca_close(dev);
61e0a6a2	177	sca_flush(dev_to_port(dev)->card);
1da177e4 LT	178	hdlc_close(dev);
	179	return 0;
	180	}
	181
	182
	183
	184	static int pci200_ioctl(struct net_device dev, struct ifreq ifr, int cmd)
	185	{
	186	const size_t size = sizeof(sync_serial_settings);
	187	sync_serial_settings new_line;
	188	sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
	189	port_t *port = dev_to_port(dev);
	190
	191	#ifdef DEBUG_RINGS
	192	if (cmd == SIOCDEVPRIVATE) {
	193	sca_dump_rings(dev);
	194	return 0;
	195	}
	196	#endif
	197	if (cmd != SIOCWANDEV)
	198	return hdlc_ioctl(dev, ifr, cmd);
	199
	200	switch(ifr->ifr_settings.type) {
	201	case IF_GET_IFACE:
	202	ifr->ifr_settings.type = IF_IFACE_V35;
	203	if (ifr->ifr_settings.size < size) {
	204	ifr->ifr_settings.size = size; /* data size wanted */
	205	return -ENOBUFS;
	206	}
	207	if (copy_to_user(line, &port->settings, size))
	208	return -EFAULT;
	209	return 0;
	210
	211	case IF_IFACE_V35:
	212	case IF_IFACE_SYNC_SERIAL:
	213	if (!capable(CAP_NET_ADMIN))
	214	return -EPERM;
	215
	216	if (copy_from_user(&new_line, line, size))
	217	return -EFAULT;
	218
	219	if (new_line.clock_type != CLOCK_EXT &&
	220	new_line.clock_type != CLOCK_TXFROMRX &&
	221	new_line.clock_type != CLOCK_INT &&
	222	new_line.clock_type != CLOCK_TXINT)
	223	return -EINVAL; /* No such clock setting */
	224
	225	if (new_line.loopback != 0 && new_line.loopback != 1)
	226	return -EINVAL;
	227
	228	memcpy(&port->settings, &new_line, size); /* Update settings */
	229	pci200_set_iface(port);
61e0a6a2	230	sca_flush(port->card);
1da177e4 LT	231	return 0;
	232
	233	default:
	234	return hdlc_ioctl(dev, ifr, cmd);
	235	}
	236	}
	237
	238
	239
	240	static void pci200_pci_remove_one(struct pci_dev *pdev)
	241	{
	242	int i;
	243	card_t *card = pci_get_drvdata(pdev);
	244
58a7ce64	245	for (i = 0; i < 2; i++)
61e0a6a2 KH	246	if (card->ports[i].card)
61e0a6a2 KH	247	unregister_hdlc_device(card->ports[i].netdev);
1da177e4 LT	248
	249	if (card->irq)
	250	free_irq(card->irq, card);
	251
	252	if (card->rambase)
	253	iounmap(card->rambase);
	254	if (card->scabase)
	255	iounmap(card->scabase);
	256	if (card->plxbase)
	257	iounmap(card->plxbase);
	258
	259	pci_release_regions(pdev);
	260	pci_disable_device(pdev);
	261	pci_set_drvdata(pdev, NULL);
61e0a6a2 KH	262	if (card->ports[0].netdev)
	263	free_netdev(card->ports[0].netdev);
	264	if (card->ports[1].netdev)
	265	free_netdev(card->ports[1].netdev);
1da177e4 LT	266	kfree(card);
	267	}
	268
991990a1 KH	269	static const struct net_device_ops pci200_ops = {
	270	.ndo_open = pci200_open,
	271	.ndo_stop = pci200_close,
	272	.ndo_change_mtu = hdlc_change_mtu,
	273	.ndo_start_xmit = hdlc_start_xmit,
	274	.ndo_do_ioctl = pci200_ioctl,
	275	};
1da177e4 LT	276
	277	static int __devinit pci200_pci_init_one(struct pci_dev *pdev,
	278	const struct pci_device_id *ent)
	279	{
	280	card_t *card;
1da177e4 LT	281	u32 __iomem *p;
	282	int i;
	283	u32 ramsize;
	284	u32 ramphys; /* buffer memory base */
	285	u32 scaphys; /* SCA memory base */
	286	u32 plxphys; /* PLX registers memory base */
	287
1da177e4 LT	288	i = pci_enable_device(pdev);
	289	if (i)
	290	return i;
	291
	292	i = pci_request_regions(pdev, "PCI200SYN");
	293	if (i) {
	294	pci_disable_device(pdev);
	295	return i;
	296	}
	297
dd00cc48	298	card = kzalloc(sizeof(card_t), GFP_KERNEL);
1da177e4 LT	299	if (card == NULL) {
	300	printk(KERN_ERR "pci200syn: unable to allocate memory\n");
	301	pci_release_regions(pdev);
	302	pci_disable_device(pdev);
	303	return -ENOBUFS;
	304	}
1da177e4	305	pci_set_drvdata(pdev, card);
61e0a6a2 KH	306	card->ports[0].netdev = alloc_hdlcdev(&card->ports[0]);
	307	card->ports[1].netdev = alloc_hdlcdev(&card->ports[1]);
	308	if (!card->ports[0].netdev \|\| !card->ports[1].netdev) {
1da177e4 LT	309	printk(KERN_ERR "pci200syn: unable to allocate memory\n");
	310	pci200_pci_remove_one(pdev);
	311	return -ENOMEM;
	312	}
	313
1da177e4 LT	314	if (pci_resource_len(pdev, 0) != PCI200SYN_PLX_SIZE \|\|
	315	pci_resource_len(pdev, 2) != PCI200SYN_SCA_SIZE \|\|
	316	pci_resource_len(pdev, 3) < 16384) {
	317	printk(KERN_ERR "pci200syn: invalid card EEPROM parameters\n");
	318	pci200_pci_remove_one(pdev);
	319	return -EFAULT;
	320	}
	321
	322	plxphys = pci_resource_start(pdev,0) & PCI_BASE_ADDRESS_MEM_MASK;
	323	card->plxbase = ioremap(plxphys, PCI200SYN_PLX_SIZE);
	324
	325	scaphys = pci_resource_start(pdev,2) & PCI_BASE_ADDRESS_MEM_MASK;
	326	card->scabase = ioremap(scaphys, PCI200SYN_SCA_SIZE);
	327
	328	ramphys = pci_resource_start(pdev,3) & PCI_BASE_ADDRESS_MEM_MASK;
275f165f	329	card->rambase = pci_ioremap_bar(pdev, 3);
1da177e4 LT	330
	331	if (card->plxbase == NULL \|\|
	332	card->scabase == NULL \|\|
	333	card->rambase == NULL) {
	334	printk(KERN_ERR "pci200syn: ioremap() failed\n");
	335	pci200_pci_remove_one(pdev);
4446065a	336	return -EFAULT;
1da177e4 LT	337	}
	338
	339	/* Reset PLX */
	340	p = &card->plxbase->init_ctrl;
	341	writel(readl(p) \| 0x40000000, p);
	342	readl(p); /* Flush the write - do not use sca_flush */
	343	udelay(1);
	344
	345	writel(readl(p) & ~0x40000000, p);
	346	readl(p); /* Flush the write - do not use sca_flush */
	347	udelay(1);
	348
	349	ramsize = sca_detect_ram(card, card->rambase,
	350	pci_resource_len(pdev, 3));
	351
	352	/* number of TX + RX buffers for one port - this is dual port card */
	353	i = ramsize / (2 * (sizeof(pkt_desc) + HDLC_MAX_MRU));
	354	card->tx_ring_buffers = min(i / 2, MAX_TX_BUFFERS);
	355	card->rx_ring_buffers = i - card->tx_ring_buffers;
	356
	357	card->buff_offset = 2 * sizeof(pkt_desc) * (card->tx_ring_buffers +
	358	card->rx_ring_buffers);
	359
	360	printk(KERN_INFO "pci200syn: %u KB RAM at 0x%x, IRQ%u, using %u TX +"
	361	" %u RX packets rings\n", ramsize / 1024, ramphys,
	362	pdev->irq, card->tx_ring_buffers, card->rx_ring_buffers);
	363
	364	if (card->tx_ring_buffers < 1) {
	365	printk(KERN_ERR "pci200syn: RAM test failed\n");
	366	pci200_pci_remove_one(pdev);
	367	return -EFAULT;
	368	}
	369
	370	/* Enable interrupts on the PCI bridge */
	371	p = &card->plxbase->intr_ctrl_stat;
	372	writew(readw(p) \| 0x0040, p);
	373
	374	/* Allocate IRQ */
96783436	375	if (request_irq(pdev->irq, sca_intr, IRQF_SHARED, "pci200syn", card)) {
1da177e4 LT	376	printk(KERN_WARNING "pci200syn: could not allocate IRQ%d.\n",
	377	pdev->irq);
	378	pci200_pci_remove_one(pdev);
	379	return -EBUSY;
	380	}
	381	card->irq = pdev->irq;
	382
	383	sca_init(card, 0);
	384
58a7ce64	385	for (i = 0; i < 2; i++) {
1da177e4	386	port_t *port = &card->ports[i];
61e0a6a2	387	struct net_device *dev = port->netdev;
1da177e4	388	hdlc_device *hdlc = dev_to_hdlc(dev);
61e0a6a2	389	port->chan = i;
1da177e4 LT	390
1da177e4 LT	391	spin_lock_init(&port->lock);
1da177e4 LT	392	dev->irq = card->irq;
	393	dev->mem_start = ramphys;
	394	dev->mem_end = ramphys + ramsize - 1;
	395	dev->tx_queue_len = 50;
991990a1	396	dev->netdev_ops = &pci200_ops;
1da177e4 LT	397	hdlc->attach = sca_attach;
	398	hdlc->xmit = sca_xmit;
	399	port->settings.clock_type = CLOCK_EXT;
	400	port->card = card;
abc9d91a	401	sca_init_port(port);
58a7ce64	402	if (register_hdlc_device(dev)) {
1da177e4 LT	403	printk(KERN_ERR "pci200syn: unable to register hdlc "
	404	"device\n");
	405	port->card = NULL;
	406	pci200_pci_remove_one(pdev);
	407	return -ENOBUFS;
	408	}
1da177e4	409
61e0a6a2 KH	410	printk(KERN_INFO "%s: PCI200SYN channel %d\n",
61e0a6a2 KH	411	dev->name, port->chan);
1da177e4 LT	412	}
	413
	414	sca_flush(card);
	415	return 0;
	416	}
	417
	418
	419
	420	static struct pci_device_id pci200_pci_tbl[] __devinitdata = {
58a7ce64 KH	421	{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, PCI_VENDOR_ID_PLX,
58a7ce64 KH	422	PCI_DEVICE_ID_PLX_PCI200SYN, 0, 0, 0 },
1da177e4 LT	423	{ 0, }
	424	};
	425
	426
	427	static struct pci_driver pci200_pci_driver = {
	428	.name = "PCI200SYN",
	429	.id_table = pci200_pci_tbl,
	430	.probe = pci200_pci_init_one,
	431	.remove = pci200_pci_remove_one,
	432	};
	433
	434
	435	static int __init pci200_init_module(void)
	436	{
1da177e4 LT	437	if (pci_clock_freq < 1000000 \|\| pci_clock_freq > 80000000) {
	438	printk(KERN_ERR "pci200syn: Invalid PCI clock frequency\n");
	439	return -EINVAL;
	440	}
29917620	441	return pci_register_driver(&pci200_pci_driver);
1da177e4 LT	442	}
	443
	444
	445
	446	static void __exit pci200_cleanup_module(void)
	447	{
	448	pci_unregister_driver(&pci200_pci_driver);
	449	}
	450
	451	MODULE_AUTHOR("Krzysztof Halasa <khc@pm.waw.pl>");
	452	MODULE_DESCRIPTION("Goramo PCI200SYN serial port driver");
	453	MODULE_LICENSE("GPL v2");
	454	MODULE_DEVICE_TABLE(pci, pci200_pci_tbl);
	455	module_param(pci_clock_freq, int, 0444);
	456	MODULE_PARM_DESC(pci_clock_freq, "System PCI clock frequency in Hz");
	457	module_init(pci200_init_module);
	458	module_exit(pci200_cleanup_module);