Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /*====================================================================== |
2 | ||
3 | Aironet driver for 4500 and 4800 series cards | |
4 | ||
5 | This code is released under both the GPL version 2 and BSD licenses. | |
6 | Either license may be used. The respective licenses are found at | |
7 | the end of this file. | |
8 | ||
9 | This code was developed by Benjamin Reed <breed@users.sourceforge.net> | |
10 | including portions of which come from the Aironet PC4500 | |
11 | Developer's Reference Manual and used with permission. Copyright | |
12 | (C) 1999 Benjamin Reed. All Rights Reserved. Permission to use | |
13 | code in the Developer's manual was granted for this driver by | |
14 | Aironet. | |
15 | ||
16 | In addition this module was derived from dummy_cs. | |
17 | The initial developer of dummy_cs is David A. Hinds | |
18 | <dahinds@users.sourceforge.net>. Portions created by David A. Hinds | |
05c9a4cf JD |
19 | are Copyright (C) 1999 David A. Hinds. All Rights Reserved. |
20 | ||
1da177e4 LT |
21 | ======================================================================*/ |
22 | ||
1da177e4 LT |
23 | #ifdef __IN_PCMCIA_PACKAGE__ |
24 | #include <pcmcia/k_compat.h> | |
25 | #endif | |
26 | #include <linux/init.h> | |
27 | #include <linux/kernel.h> | |
28 | #include <linux/module.h> | |
29 | #include <linux/ptrace.h> | |
30 | #include <linux/slab.h> | |
31 | #include <linux/string.h> | |
32 | #include <linux/timer.h> | |
33 | #include <linux/netdevice.h> | |
34 | ||
1da177e4 LT |
35 | #include <pcmcia/cs_types.h> |
36 | #include <pcmcia/cs.h> | |
37 | #include <pcmcia/cistpl.h> | |
38 | #include <pcmcia/cisreg.h> | |
39 | #include <pcmcia/ds.h> | |
40 | ||
05c9a4cf | 41 | #include <linux/io.h> |
1da177e4 LT |
42 | #include <asm/system.h> |
43 | ||
d3808760 AB |
44 | #include "airo.h" |
45 | ||
1da177e4 LT |
46 | /* |
47 | All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If | |
48 | you do not define PCMCIA_DEBUG at all, all the debug code will be | |
49 | left out. If you compile with PCMCIA_DEBUG=0, the debug code will | |
50 | be present but disabled -- but it can then be enabled for specific | |
51 | modules at load time with a 'pc_debug=#' option to insmod. | |
52 | */ | |
53 | #ifdef PCMCIA_DEBUG | |
54 | static int pc_debug = PCMCIA_DEBUG; | |
55 | module_param(pc_debug, int, 0); | |
56 | static char *version = "$Revision: 1.2 $"; | |
05c9a4cf | 57 | #define DEBUG(n, args...) if (pc_debug > (n)) printk(KERN_DEBUG args); |
1da177e4 LT |
58 | #else |
59 | #define DEBUG(n, args...) | |
60 | #endif | |
61 | ||
62 | /*====================================================================*/ | |
63 | ||
64 | MODULE_AUTHOR("Benjamin Reed"); | |
05c9a4cf JD |
65 | MODULE_DESCRIPTION("Support for Cisco/Aironet 802.11 wireless ethernet " |
66 | "cards. This is the module that links the PCMCIA card " | |
67 | "with the airo module."); | |
1da177e4 LT |
68 | MODULE_LICENSE("Dual BSD/GPL"); |
69 | MODULE_SUPPORTED_DEVICE("Aironet 4500, 4800 and Cisco 340 PCMCIA cards"); | |
70 | ||
71 | /*====================================================================*/ | |
72 | ||
73 | /* | |
74 | The event() function is this driver's Card Services event handler. | |
75 | It will be called by Card Services when an appropriate card status | |
76 | event is received. The config() and release() entry points are | |
77 | used to configure or release a socket, in response to card | |
78 | insertion and ejection events. They are invoked from the airo_cs | |
05c9a4cf | 79 | event handler. |
1da177e4 LT |
80 | */ |
81 | ||
15b99ac1 | 82 | static int airo_config(struct pcmcia_device *link); |
fba395ee | 83 | static void airo_release(struct pcmcia_device *link); |
1da177e4 LT |
84 | |
85 | /* | |
86 | The attach() and detach() entry points are used to create and destroy | |
87 | "instances" of the driver, where each instance represents everything | |
88 | needed to manage one actual PCMCIA card. | |
89 | */ | |
90 | ||
cc3b4866 | 91 | static void airo_detach(struct pcmcia_device *p_dev); |
1da177e4 LT |
92 | |
93 | /* | |
94 | You'll also need to prototype all the functions that will actually | |
95 | be used to talk to your device. See 'pcmem_cs' for a good example | |
96 | of a fully self-sufficient driver; the other drivers rely more or | |
97 | less on other parts of the kernel. | |
98 | */ | |
99 | ||
1da177e4 LT |
100 | /* |
101 | A linked list of "instances" of the aironet device. Each actual | |
102 | PCMCIA card corresponds to one device instance, and is described | |
fba395ee | 103 | by one struct pcmcia_device structure (defined in ds.h). |
1da177e4 LT |
104 | |
105 | You may not want to use a linked list for this -- for example, the | |
05c9a4cf JD |
106 | memory card driver uses an array of struct pcmcia_device pointers, |
107 | where minor device numbers are used to derive the corresponding | |
108 | array index. | |
1da177e4 LT |
109 | */ |
110 | ||
1da177e4 | 111 | /* |
1da177e4 LT |
112 | A driver needs to provide a dev_node_t structure for each device |
113 | on a card. In some cases, there is only one device per card (for | |
114 | example, ethernet cards, modems). In other cases, there may be | |
115 | many actual or logical devices (SCSI adapters, memory cards with | |
116 | multiple partitions). The dev_node_t structures need to be kept | |
fba395ee | 117 | in a linked list starting at the 'dev' field of a struct pcmcia_device |
1da177e4 LT |
118 | structure. We allocate them in the card's private data structure, |
119 | because they generally shouldn't be allocated dynamically. | |
120 | ||
121 | In this case, we also provide a flag to indicate if a device is | |
122 | "stopped" due to a power management event, or card ejection. The | |
123 | device IO routines can use a flag like this to throttle IO to a | |
124 | card that is not ready to accept it. | |
125 | */ | |
05c9a4cf | 126 | |
1da177e4 LT |
127 | typedef struct local_info_t { |
128 | dev_node_t node; | |
129 | struct net_device *eth_dev; | |
130 | } local_info_t; | |
131 | ||
132 | /*====================================================================== | |
05c9a4cf | 133 | |
1da177e4 LT |
134 | airo_attach() creates an "instance" of the driver, allocating |
135 | local data structures for one device. The device is registered | |
136 | with Card Services. | |
05c9a4cf | 137 | |
1da177e4 LT |
138 | The dev_link structure is initialized, but we don't actually |
139 | configure the card at this point -- we wait until we receive a | |
140 | card insertion event. | |
05c9a4cf | 141 | |
1da177e4 LT |
142 | ======================================================================*/ |
143 | ||
15b99ac1 | 144 | static int airo_probe(struct pcmcia_device *p_dev) |
1da177e4 | 145 | { |
1da177e4 | 146 | local_info_t *local; |
f8cfa618 | 147 | |
1da177e4 LT |
148 | DEBUG(0, "airo_attach()\n"); |
149 | ||
1da177e4 | 150 | /* Interrupt setup */ |
47cbb110 | 151 | p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; |
fd238232 DB |
152 | p_dev->irq.IRQInfo1 = IRQ_LEVEL_ID; |
153 | p_dev->irq.Handler = NULL; | |
05c9a4cf | 154 | |
1da177e4 LT |
155 | /* |
156 | General socket configuration defaults can go here. In this | |
157 | client, we assume very little, and rely on the CIS for almost | |
158 | everything. In most clients, many details (i.e., number, sizes, | |
159 | and attributes of IO windows) are fixed by the nature of the | |
160 | device, and can be hard-wired here. | |
161 | */ | |
fd238232 DB |
162 | p_dev->conf.Attributes = 0; |
163 | p_dev->conf.IntType = INT_MEMORY_AND_IO; | |
05c9a4cf | 164 | |
1da177e4 | 165 | /* Allocate space for private device-specific data */ |
b69a3aa8 | 166 | local = kzalloc(sizeof(local_info_t), GFP_KERNEL); |
1da177e4 LT |
167 | if (!local) { |
168 | printk(KERN_ERR "airo_cs: no memory for new device\n"); | |
f8cfa618 | 169 | return -ENOMEM; |
1da177e4 | 170 | } |
fd238232 | 171 | p_dev->priv = local; |
f8cfa618 | 172 | |
15b99ac1 | 173 | return airo_config(p_dev); |
1da177e4 LT |
174 | } /* airo_attach */ |
175 | ||
176 | /*====================================================================== | |
05c9a4cf | 177 | |
1da177e4 LT |
178 | This deletes a driver "instance". The device is de-registered |
179 | with Card Services. If it has been released, all local data | |
180 | structures are freed. Otherwise, the structures will be freed | |
181 | when the device is released. | |
05c9a4cf | 182 | |
1da177e4 LT |
183 | ======================================================================*/ |
184 | ||
fba395ee | 185 | static void airo_detach(struct pcmcia_device *link) |
1da177e4 | 186 | { |
1da177e4 | 187 | DEBUG(0, "airo_detach(0x%p)\n", link); |
b4635811 | 188 | |
e2d40963 | 189 | airo_release(link); |
b4635811 | 190 | |
05c9a4cf JD |
191 | if (((local_info_t *)link->priv)->eth_dev) { |
192 | stop_airo_card(((local_info_t *)link->priv)->eth_dev, 0); | |
1da177e4 | 193 | } |
05c9a4cf | 194 | ((local_info_t *)link->priv)->eth_dev = NULL; |
cc3b4866 | 195 | |
b4558ea9 | 196 | kfree(link->priv); |
1da177e4 LT |
197 | } /* airo_detach */ |
198 | ||
199 | /*====================================================================== | |
05c9a4cf | 200 | |
1da177e4 LT |
201 | airo_config() is scheduled to run after a CARD_INSERTION event |
202 | is received, to configure the PCMCIA socket, and to make the | |
203 | device available to the system. | |
05c9a4cf | 204 | |
1da177e4 LT |
205 | ======================================================================*/ |
206 | ||
207 | #define CS_CHECK(fn, ret) \ | |
208 | do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) | |
209 | ||
b54bf94b DB |
210 | static int airo_cs_config_check(struct pcmcia_device *p_dev, |
211 | cistpl_cftable_entry_t *cfg, | |
8e2fc39d | 212 | cistpl_cftable_entry_t *dflt, |
ad913c11 | 213 | unsigned int vcc, |
b54bf94b DB |
214 | void *priv_data) |
215 | { | |
8e2fc39d | 216 | win_req_t *req = priv_data; |
b54bf94b DB |
217 | |
218 | if (cfg->index == 0) | |
219 | return -ENODEV; | |
220 | ||
b54bf94b DB |
221 | /* Does this card need audio output? */ |
222 | if (cfg->flags & CISTPL_CFTABLE_AUDIO) { | |
223 | p_dev->conf.Attributes |= CONF_ENABLE_SPKR; | |
224 | p_dev->conf.Status = CCSR_AUDIO_ENA; | |
225 | } | |
226 | ||
227 | /* Use power settings for Vcc and Vpp if present */ | |
228 | /* Note that the CIS values need to be rescaled */ | |
229 | if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM)) | |
230 | p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM]/10000; | |
8e2fc39d DB |
231 | else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM)) |
232 | p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000; | |
b54bf94b DB |
233 | |
234 | /* Do we need to allocate an interrupt? */ | |
8e2fc39d | 235 | if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1) |
b54bf94b DB |
236 | p_dev->conf.Attributes |= CONF_ENABLE_IRQ; |
237 | ||
238 | /* IO window settings */ | |
239 | p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; | |
8e2fc39d DB |
240 | if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { |
241 | cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; | |
b54bf94b DB |
242 | p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; |
243 | if (!(io->flags & CISTPL_IO_8BIT)) | |
244 | p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; | |
245 | if (!(io->flags & CISTPL_IO_16BIT)) | |
246 | p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; | |
247 | p_dev->io.BasePort1 = io->win[0].base; | |
248 | p_dev->io.NumPorts1 = io->win[0].len; | |
249 | if (io->nwin > 1) { | |
250 | p_dev->io.Attributes2 = p_dev->io.Attributes1; | |
251 | p_dev->io.BasePort2 = io->win[1].base; | |
252 | p_dev->io.NumPorts2 = io->win[1].len; | |
253 | } | |
254 | } | |
255 | ||
256 | /* This reserves IO space but doesn't actually enable it */ | |
257 | if (pcmcia_request_io(p_dev, &p_dev->io) != 0) | |
258 | return -ENODEV; | |
259 | ||
260 | /* | |
261 | Now set up a common memory window, if needed. There is room | |
262 | in the struct pcmcia_device structure for one memory window handle, | |
263 | but if the base addresses need to be saved, or if multiple | |
264 | windows are needed, the info should go in the private data | |
265 | structure for this device. | |
266 | ||
267 | Note that the memory window base is a physical address, and | |
268 | needs to be mapped to virtual space with ioremap() before it | |
269 | is used. | |
270 | */ | |
8e2fc39d DB |
271 | if ((cfg->mem.nwin > 0) || (dflt->mem.nwin > 0)) { |
272 | cistpl_mem_t *mem = (cfg->mem.nwin) ? &cfg->mem : &dflt->mem; | |
b54bf94b | 273 | memreq_t map; |
8e2fc39d DB |
274 | req->Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM; |
275 | req->Base = mem->win[0].host_addr; | |
276 | req->Size = mem->win[0].len; | |
277 | req->AccessSpeed = 0; | |
278 | if (pcmcia_request_window(&p_dev, req, &p_dev->win) != 0) | |
b54bf94b DB |
279 | return -ENODEV; |
280 | map.Page = 0; | |
281 | map.CardOffset = mem->win[0].card_addr; | |
282 | if (pcmcia_map_mem_page(p_dev->win, &map) != 0) | |
283 | return -ENODEV; | |
284 | } | |
285 | /* If we got this far, we're cool! */ | |
286 | return 0; | |
287 | } | |
288 | ||
289 | ||
15b99ac1 | 290 | static int airo_config(struct pcmcia_device *link) |
1da177e4 | 291 | { |
1da177e4 | 292 | local_info_t *dev; |
8e2fc39d | 293 | win_req_t *req; |
1da177e4 | 294 | int last_fn, last_ret; |
fba395ee | 295 | |
1da177e4 LT |
296 | dev = link->priv; |
297 | ||
298 | DEBUG(0, "airo_config(0x%p)\n", link); | |
e2d40963 | 299 | |
8e2fc39d DB |
300 | req = kzalloc(sizeof(win_req_t), GFP_KERNEL); |
301 | if (!req) | |
b54bf94b DB |
302 | return -ENOMEM; |
303 | ||
1da177e4 | 304 | /* |
b54bf94b DB |
305 | * In this loop, we scan the CIS for configuration table |
306 | * entries, each of which describes a valid card | |
307 | * configuration, including voltage, IO window, memory window, | |
308 | * and interrupt settings. | |
309 | * | |
310 | * We make no assumptions about the card to be configured: we | |
311 | * use just the information available in the CIS. In an ideal | |
312 | * world, this would work for any PCMCIA card, but it requires | |
313 | * a complete and accurate CIS. In practice, a driver usually | |
314 | * "knows" most of these things without consulting the CIS, | |
315 | * and most client drivers will only use the CIS to fill in | |
316 | * implementation-defined details. | |
317 | */ | |
8e2fc39d | 318 | last_ret = pcmcia_loop_config(link, airo_cs_config_check, req); |
b54bf94b DB |
319 | if (last_ret) |
320 | goto failed; | |
321 | ||
1da177e4 | 322 | /* |
b54bf94b DB |
323 | Allocate an interrupt line. Note that this does not assign a |
324 | handler to the interrupt, unless the 'Handler' member of the | |
325 | irq structure is initialized. | |
1da177e4 | 326 | */ |
1da177e4 | 327 | if (link->conf.Attributes & CONF_ENABLE_IRQ) |
fba395ee | 328 | CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq)); |
05c9a4cf | 329 | |
1da177e4 LT |
330 | /* |
331 | This actually configures the PCMCIA socket -- setting up | |
332 | the I/O windows and the interrupt mapping, and putting the | |
333 | card and host interface into "Memory and IO" mode. | |
334 | */ | |
05c9a4cf JD |
335 | CS_CHECK(RequestConfiguration, |
336 | pcmcia_request_configuration(link, &link->conf)); | |
337 | ((local_info_t *)link->priv)->eth_dev = | |
338 | init_airo_card(link->irq.AssignedIRQ, | |
339 | link->io.BasePort1, 1, &handle_to_dev(link)); | |
340 | if (!((local_info_t *)link->priv)->eth_dev) | |
341 | goto cs_failed; | |
342 | ||
1da177e4 LT |
343 | /* |
344 | At this point, the dev_node_t structure(s) need to be | |
fd238232 | 345 | initialized and arranged in a linked list at link->dev_node. |
1da177e4 | 346 | */ |
05c9a4cf | 347 | strcpy(dev->node.dev_name, ((local_info_t *)link->priv)->eth_dev->name); |
1da177e4 | 348 | dev->node.major = dev->node.minor = 0; |
fd238232 | 349 | link->dev_node = &dev->node; |
05c9a4cf | 350 | |
1da177e4 | 351 | /* Finally, report what we've done */ |
70294b46 DB |
352 | printk(KERN_INFO "%s: index 0x%02x: ", |
353 | dev->node.dev_name, link->conf.ConfigIndex); | |
354 | if (link->conf.Vpp) | |
355 | printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10); | |
1da177e4 LT |
356 | if (link->conf.Attributes & CONF_ENABLE_IRQ) |
357 | printk(", irq %d", link->irq.AssignedIRQ); | |
358 | if (link->io.NumPorts1) | |
359 | printk(", io 0x%04x-0x%04x", link->io.BasePort1, | |
360 | link->io.BasePort1+link->io.NumPorts1-1); | |
361 | if (link->io.NumPorts2) | |
362 | printk(" & 0x%04x-0x%04x", link->io.BasePort2, | |
363 | link->io.BasePort2+link->io.NumPorts2-1); | |
364 | if (link->win) | |
8e2fc39d DB |
365 | printk(", mem 0x%06lx-0x%06lx", req->Base, |
366 | req->Base+req->Size-1); | |
1da177e4 | 367 | printk("\n"); |
8e2fc39d | 368 | kfree(req); |
15b99ac1 DB |
369 | return 0; |
370 | ||
1da177e4 | 371 | cs_failed: |
fba395ee | 372 | cs_error(link, last_fn, last_ret); |
b54bf94b | 373 | failed: |
1da177e4 | 374 | airo_release(link); |
8e2fc39d | 375 | kfree(req); |
15b99ac1 | 376 | return -ENODEV; |
1da177e4 LT |
377 | } /* airo_config */ |
378 | ||
379 | /*====================================================================== | |
05c9a4cf | 380 | |
1da177e4 LT |
381 | After a card is removed, airo_release() will unregister the |
382 | device, and release the PCMCIA configuration. If the device is | |
383 | still open, this will be postponed until it is closed. | |
05c9a4cf | 384 | |
1da177e4 LT |
385 | ======================================================================*/ |
386 | ||
fba395ee | 387 | static void airo_release(struct pcmcia_device *link) |
1da177e4 LT |
388 | { |
389 | DEBUG(0, "airo_release(0x%p)\n", link); | |
fba395ee | 390 | pcmcia_disable_device(link); |
1da177e4 LT |
391 | } |
392 | ||
fba395ee | 393 | static int airo_suspend(struct pcmcia_device *link) |
98e4c28b | 394 | { |
98e4c28b DB |
395 | local_info_t *local = link->priv; |
396 | ||
e2d40963 | 397 | netif_device_detach(local->eth_dev); |
98e4c28b DB |
398 | |
399 | return 0; | |
400 | } | |
401 | ||
fba395ee | 402 | static int airo_resume(struct pcmcia_device *link) |
98e4c28b | 403 | { |
98e4c28b DB |
404 | local_info_t *local = link->priv; |
405 | ||
e2d40963 | 406 | if (link->open) { |
98e4c28b DB |
407 | reset_airo_card(local->eth_dev); |
408 | netif_device_attach(local->eth_dev); | |
409 | } | |
410 | ||
411 | return 0; | |
412 | } | |
413 | ||
7018d06d DB |
414 | static struct pcmcia_device_id airo_ids[] = { |
415 | PCMCIA_DEVICE_MANF_CARD(0x015f, 0x000a), | |
416 | PCMCIA_DEVICE_MANF_CARD(0x015f, 0x0005), | |
417 | PCMCIA_DEVICE_MANF_CARD(0x015f, 0x0007), | |
418 | PCMCIA_DEVICE_MANF_CARD(0x0105, 0x0007), | |
419 | PCMCIA_DEVICE_NULL, | |
420 | }; | |
421 | MODULE_DEVICE_TABLE(pcmcia, airo_ids); | |
422 | ||
1da177e4 LT |
423 | static struct pcmcia_driver airo_driver = { |
424 | .owner = THIS_MODULE, | |
425 | .drv = { | |
426 | .name = "airo_cs", | |
427 | }, | |
15b99ac1 | 428 | .probe = airo_probe, |
cc3b4866 | 429 | .remove = airo_detach, |
7018d06d | 430 | .id_table = airo_ids, |
98e4c28b DB |
431 | .suspend = airo_suspend, |
432 | .resume = airo_resume, | |
1da177e4 LT |
433 | }; |
434 | ||
435 | static int airo_cs_init(void) | |
436 | { | |
437 | return pcmcia_register_driver(&airo_driver); | |
438 | } | |
439 | ||
440 | static void airo_cs_cleanup(void) | |
441 | { | |
442 | pcmcia_unregister_driver(&airo_driver); | |
1da177e4 LT |
443 | } |
444 | ||
445 | /* | |
446 | This program is free software; you can redistribute it and/or | |
447 | modify it under the terms of the GNU General Public License | |
448 | as published by the Free Software Foundation; either version 2 | |
449 | of the License, or (at your option) any later version. | |
450 | ||
451 | This program is distributed in the hope that it will be useful, | |
452 | but WITHOUT ANY WARRANTY; without even the implied warranty of | |
453 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
454 | GNU General Public License for more details. | |
455 | ||
456 | In addition: | |
457 | ||
458 | Redistribution and use in source and binary forms, with or without | |
459 | modification, are permitted provided that the following conditions | |
460 | are met: | |
461 | ||
462 | 1. Redistributions of source code must retain the above copyright | |
463 | notice, this list of conditions and the following disclaimer. | |
464 | 2. Redistributions in binary form must reproduce the above copyright | |
465 | notice, this list of conditions and the following disclaimer in the | |
466 | documentation and/or other materials provided with the distribution. | |
467 | 3. The name of the author may not be used to endorse or promote | |
468 | products derived from this software without specific prior written | |
469 | permission. | |
470 | ||
471 | THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR | |
472 | IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED | |
473 | WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE | |
474 | ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, | |
475 | INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES | |
476 | (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR | |
477 | SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) | |
478 | HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, | |
479 | STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING | |
480 | IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE | |
05c9a4cf | 481 | POSSIBILITY OF SUCH DAMAGE. |
1da177e4 LT |
482 | */ |
483 | ||
484 | module_init(airo_cs_init); | |
485 | module_exit(airo_cs_cleanup); |