[deliverable/linux.git] / drivers / net / wireless / b43 / phy_ht.h

#ifndef B43_PHY_HT_H_
#define B43_PHY_HT_H_

#include "phy_common.h"


#define B43_PHY_HT_BBCFG			0x001 /* BB config */
#define  B43_PHY_HT_BBCFG_RSTCCA		0x4000 /* Reset CCA */
#define  B43_PHY_HT_BBCFG_RSTRX			0x8000 /* Reset RX */
#define B43_PHY_HT_BANDCTL			0x009 /* Band control */
#define  B43_PHY_HT_BANDCTL_5GHZ		0x0001 /* Use the 5GHz band */
#define B43_PHY_HT_TABLE_ADDR			0x072 /* Table address */
#define B43_PHY_HT_TABLE_DATALO			0x073 /* Table data low */
#define B43_PHY_HT_TABLE_DATAHI			0x074 /* Table data high */
#define B43_PHY_HT_CLASS_CTL			0x0B0 /* Classifier control */
#define  B43_PHY_HT_CLASS_CTL_CCK_EN		0x0001 /* CCK enable */
#define  B43_PHY_HT_CLASS_CTL_OFDM_EN		0x0002 /* OFDM enable */
#define  B43_PHY_HT_CLASS_CTL_WAITED_EN		0x0004 /* Waited enable */
#define B43_PHY_HT_IQLOCAL_CMDGCTL		0x0C2	/* I/Q LO cal command G control */
#define B43_PHY_HT_SAMP_CMD			0x0C3	/* Sample command */
#define  B43_PHY_HT_SAMP_CMD_STOP		0x0002	/* Stop */
#define B43_PHY_HT_SAMP_LOOP_CNT		0x0C4	/* Sample loop count */
#define B43_PHY_HT_SAMP_WAIT_CNT		0x0C5	/* Sample wait count */
#define B43_PHY_HT_SAMP_DEP_CNT			0x0C6	/* Sample depth count */
#define B43_PHY_HT_SAMP_STAT			0x0C7	/* Sample status */
#define B43_PHY_HT_EST_PWR_C1			0x118
#define B43_PHY_HT_EST_PWR_C2			0x119
#define B43_PHY_HT_EST_PWR_C3			0x11A
#define B43_PHY_HT_TSSIMODE			0x122	/* TSSI mode */
#define  B43_PHY_HT_TSSIMODE_EN			0x0001	/* TSSI enable */
#define  B43_PHY_HT_TSSIMODE_PDEN		0x0002	/* Power det enable */
#define B43_PHY_HT_BW1				0x1CE
#define B43_PHY_HT_BW2				0x1CF
#define B43_PHY_HT_BW3				0x1D0
#define B43_PHY_HT_BW4				0x1D1
#define B43_PHY_HT_BW5				0x1D2
#define B43_PHY_HT_BW6				0x1D3
#define B43_PHY_HT_TXPCTL_CMD_C1		0x1E7	/* TX power control command */
#define  B43_PHY_HT_TXPCTL_CMD_C1_INIT		0x007F	/* Init */
#define  B43_PHY_HT_TXPCTL_CMD_C1_COEFF		0x2000	/* Power control coefficients */
#define  B43_PHY_HT_TXPCTL_CMD_C1_HWPCTLEN	0x4000	/* Hardware TX power control enable */
#define  B43_PHY_HT_TXPCTL_CMD_C1_PCTLEN	0x8000	/* TX power control enable */
#define B43_PHY_HT_TXPCTL_N			0x1E8	/* TX power control N num */
#define  B43_PHY_HT_TXPCTL_N_TSSID		0x00FF	/* N TSSI delay */
#define  B43_PHY_HT_TXPCTL_N_TSSID_SHIFT	0
#define  B43_PHY_HT_TXPCTL_N_NPTIL2		0x0700	/* N PT integer log2 */
#define  B43_PHY_HT_TXPCTL_N_NPTIL2_SHIFT	8
#define B43_PHY_HT_TXPCTL_IDLE_TSSI		0x1E9	/* TX power control idle TSSI */
#define  B43_PHY_HT_TXPCTL_IDLE_TSSI_C1		0x003F
#define  B43_PHY_HT_TXPCTL_IDLE_TSSI_C1_SHIFT	0
#define  B43_PHY_HT_TXPCTL_IDLE_TSSI_C2		0x3F00
#define  B43_PHY_HT_TXPCTL_IDLE_TSSI_C2_SHIFT	8
#define  B43_PHY_HT_TXPCTL_IDLE_TSSI_BINF	0x8000	/* Raw TSSI offset bin format */
#define B43_PHY_HT_TXPCTL_TARG_PWR		0x1EA	/* TX power control target power */
#define  B43_PHY_HT_TXPCTL_TARG_PWR_C1		0x00FF	/* Power 0 */
#define  B43_PHY_HT_TXPCTL_TARG_PWR_C1_SHIFT	0
#define  B43_PHY_HT_TXPCTL_TARG_PWR_C2		0xFF00	/* Power 1 */
#define  B43_PHY_HT_TXPCTL_TARG_PWR_C2_SHIFT	8
#define B43_PHY_HT_TX_PCTL_STATUS_C1		0x1ED
#define B43_PHY_HT_TX_PCTL_STATUS_C2		0x1EE
#define B43_PHY_HT_TXPCTL_CMD_C2		0x222
#define  B43_PHY_HT_TXPCTL_CMD_C2_INIT		0x007F
#define B43_PHY_HT_RSSI_C1			0x219
#define B43_PHY_HT_RSSI_C2			0x21A
#define B43_PHY_HT_RSSI_C3			0x21B

#define B43_PHY_HT_C1_CLIP1THRES		B43_PHY_OFDM(0x00E)
#define B43_PHY_HT_C2_CLIP1THRES		B43_PHY_OFDM(0x04E)
#define B43_PHY_HT_C3_CLIP1THRES		B43_PHY_OFDM(0x08E)

#define B43_PHY_HT_RF_SEQ_MODE			B43_PHY_EXTG(0x000)
#define  B43_PHY_HT_RF_SEQ_MODE_CA_OVER		0x0001	/* Core active override */
#define  B43_PHY_HT_RF_SEQ_MODE_TR_OVER		0x0002	/* Trigger override */
#define B43_PHY_HT_RF_SEQ_TRIG			B43_PHY_EXTG(0x003)
#define  B43_PHY_HT_RF_SEQ_TRIG_RX2TX		0x0001 /* RX2TX */
#define  B43_PHY_HT_RF_SEQ_TRIG_TX2RX		0x0002 /* TX2RX */
#define  B43_PHY_HT_RF_SEQ_TRIG_UPGH		0x0004 /* Update gain H */
#define  B43_PHY_HT_RF_SEQ_TRIG_UPGL		0x0008 /* Update gain L */
#define  B43_PHY_HT_RF_SEQ_TRIG_UPGU		0x0010 /* Update gain U */
#define  B43_PHY_HT_RF_SEQ_TRIG_RST2RX		0x0020 /* Reset to RX */
#define B43_PHY_HT_RF_SEQ_STATUS		B43_PHY_EXTG(0x004)
/* Values for the status are the same as for the trigger */

#define B43_PHY_HT_RF_CTL1			B43_PHY_EXTG(0x010)

#define B43_PHY_HT_RF_CTL_INT_C1		B43_PHY_EXTG(0x04c)
#define B43_PHY_HT_RF_CTL_INT_C2		B43_PHY_EXTG(0x06c)
#define B43_PHY_HT_RF_CTL_INT_C3		B43_PHY_EXTG(0x08c)

#define B43_PHY_HT_AFE_C1_OVER			B43_PHY_EXTG(0x110)
#define B43_PHY_HT_AFE_C1			B43_PHY_EXTG(0x111)
#define B43_PHY_HT_AFE_C2_OVER			B43_PHY_EXTG(0x114)
#define B43_PHY_HT_AFE_C2			B43_PHY_EXTG(0x115)
#define B43_PHY_HT_AFE_C3_OVER			B43_PHY_EXTG(0x118)
#define B43_PHY_HT_AFE_C3			B43_PHY_EXTG(0x119)

#define B43_PHY_HT_TXPCTL_CMD_C3		B43_PHY_EXTG(0x164)
#define  B43_PHY_HT_TXPCTL_CMD_C3_INIT		0x007F
#define B43_PHY_HT_TXPCTL_IDLE_TSSI2		B43_PHY_EXTG(0x165)	/* TX power control idle TSSI */
#define  B43_PHY_HT_TXPCTL_IDLE_TSSI2_C3	0x003F
#define  B43_PHY_HT_TXPCTL_IDLE_TSSI2_C3_SHIFT	0
#define B43_PHY_HT_TXPCTL_TARG_PWR2		B43_PHY_EXTG(0x166)	/* TX power control target power */
#define  B43_PHY_HT_TXPCTL_TARG_PWR2_C3		0x00FF
#define  B43_PHY_HT_TXPCTL_TARG_PWR2_C3_SHIFT	0
#define B43_PHY_HT_TX_PCTL_STATUS_C3		B43_PHY_EXTG(0x169)

#define B43_PHY_HT_TEST				B43_PHY_N_BMODE(0x00A)


/* Values for PHY registers used on channel switching */
struct b43_phy_ht_channeltab_e_phy {
	u16 bw1;
	u16 bw2;
	u16 bw3;
	u16 bw4;
	u16 bw5;
	u16 bw6;
};


struct b43_phy_ht {
	u16 rf_ctl_int_save[3];

	bool tx_pwr_ctl;
	u8 tx_pwr_idx[3];

	s32 bb_mult_save[3];

	u8 idle_tssi[3];
};


struct b43_phy_operations;
extern const struct b43_phy_operations b43_phyops_ht;

#endif /* B43_PHY_HT_H_ */
Commit	Line	Data
d7520b1d RM	1	#ifndef B43_PHY_HT_H_
	2	#define B43_PHY_HT_H_
	3
	4	#include "phy_common.h"
	5
	6
19240f36 RM	7	#define B43_PHY_HT_BBCFG 0x001 /* BB config */
	8	#define B43_PHY_HT_BBCFG_RSTCCA 0x4000 /* Reset CCA */
	9	#define B43_PHY_HT_BBCFG_RSTRX 0x8000 /* Reset RX */
bdb2dfb2	10	#define B43_PHY_HT_BANDCTL 0x009 /* Band control */
19240f36	11	#define B43_PHY_HT_BANDCTL_5GHZ 0x0001 /* Use the 5GHz band */
d7520b1d RM	12	#define B43_PHY_HT_TABLE_ADDR 0x072 /* Table address */
	13	#define B43_PHY_HT_TABLE_DATALO 0x073 /* Table data low */
	14	#define B43_PHY_HT_TABLE_DATAHI 0x074 /* Table data high */
b372afae RM	15	#define B43_PHY_HT_CLASS_CTL 0x0B0 /* Classifier control */
	16	#define B43_PHY_HT_CLASS_CTL_CCK_EN 0x0001 /* CCK enable */
	17	#define B43_PHY_HT_CLASS_CTL_OFDM_EN 0x0002 /* OFDM enable */
	18	#define B43_PHY_HT_CLASS_CTL_WAITED_EN 0x0004 /* Waited enable */
371ec465 RM	19	#define B43_PHY_HT_IQLOCAL_CMDGCTL 0x0C2 /* I/Q LO cal command G control */
	20	#define B43_PHY_HT_SAMP_CMD 0x0C3 /* Sample command */
	21	#define B43_PHY_HT_SAMP_CMD_STOP 0x0002 /* Stop */
396535e1 RM	22	#define B43_PHY_HT_SAMP_LOOP_CNT 0x0C4 /* Sample loop count */
	23	#define B43_PHY_HT_SAMP_WAIT_CNT 0x0C5 /* Sample wait count */
	24	#define B43_PHY_HT_SAMP_DEP_CNT 0x0C6 /* Sample depth count */
371ec465	25	#define B43_PHY_HT_SAMP_STAT 0x0C7 /* Sample status */
fc6ab1e0 RM	26	#define B43_PHY_HT_EST_PWR_C1 0x118
	27	#define B43_PHY_HT_EST_PWR_C2 0x119
	28	#define B43_PHY_HT_EST_PWR_C3 0x11A
5949e040 RM	29	#define B43_PHY_HT_TSSIMODE 0x122 /* TSSI mode */
	30	#define B43_PHY_HT_TSSIMODE_EN 0x0001 /* TSSI enable */
	31	#define B43_PHY_HT_TSSIMODE_PDEN 0x0002 /* Power det enable */
bdb2dfb2 RM	32	#define B43_PHY_HT_BW1 0x1CE
	33	#define B43_PHY_HT_BW2 0x1CF
	34	#define B43_PHY_HT_BW3 0x1D0
	35	#define B43_PHY_HT_BW4 0x1D1
	36	#define B43_PHY_HT_BW5 0x1D2
	37	#define B43_PHY_HT_BW6 0x1D3
60e8fb92 RM	38	#define B43_PHY_HT_TXPCTL_CMD_C1 0x1E7 /* TX power control command */
	39	#define B43_PHY_HT_TXPCTL_CMD_C1_INIT 0x007F /* Init */
	40	#define B43_PHY_HT_TXPCTL_CMD_C1_COEFF 0x2000 /* Power control coefficients */
	41	#define B43_PHY_HT_TXPCTL_CMD_C1_HWPCTLEN 0x4000 /* Hardware TX power control enable */
	42	#define B43_PHY_HT_TXPCTL_CMD_C1_PCTLEN 0x8000 /* TX power control enable */
5949e040 RM	43	#define B43_PHY_HT_TXPCTL_N 0x1E8 /* TX power control N num */
	44	#define B43_PHY_HT_TXPCTL_N_TSSID 0x00FF /* N TSSI delay */
	45	#define B43_PHY_HT_TXPCTL_N_TSSID_SHIFT 0
	46	#define B43_PHY_HT_TXPCTL_N_NPTIL2 0x0700 /* N PT integer log2 */
	47	#define B43_PHY_HT_TXPCTL_N_NPTIL2_SHIFT 8
	48	#define B43_PHY_HT_TXPCTL_IDLE_TSSI 0x1E9 /* TX power control idle TSSI */
	49	#define B43_PHY_HT_TXPCTL_IDLE_TSSI_C1 0x003F
	50	#define B43_PHY_HT_TXPCTL_IDLE_TSSI_C1_SHIFT 0
	51	#define B43_PHY_HT_TXPCTL_IDLE_TSSI_C2 0x3F00
	52	#define B43_PHY_HT_TXPCTL_IDLE_TSSI_C2_SHIFT 8
	53	#define B43_PHY_HT_TXPCTL_IDLE_TSSI_BINF 0x8000 /* Raw TSSI offset bin format */
	54	#define B43_PHY_HT_TXPCTL_TARG_PWR 0x1EA /* TX power control target power */
	55	#define B43_PHY_HT_TXPCTL_TARG_PWR_C1 0x00FF /* Power 0 */
	56	#define B43_PHY_HT_TXPCTL_TARG_PWR_C1_SHIFT 0
	57	#define B43_PHY_HT_TXPCTL_TARG_PWR_C2 0xFF00 /* Power 1 */
	58	#define B43_PHY_HT_TXPCTL_TARG_PWR_C2_SHIFT 8
fc6ab1e0 RM	59	#define B43_PHY_HT_TX_PCTL_STATUS_C1 0x1ED
fc6ab1e0 RM	60	#define B43_PHY_HT_TX_PCTL_STATUS_C2 0x1EE
60e8fb92 RM	61	#define B43_PHY_HT_TXPCTL_CMD_C2 0x222
60e8fb92 RM	62	#define B43_PHY_HT_TXPCTL_CMD_C2_INIT 0x007F
4409a23f RM	63	#define B43_PHY_HT_RSSI_C1 0x219
	64	#define B43_PHY_HT_RSSI_C2 0x21A
	65	#define B43_PHY_HT_RSSI_C3 0x21B
d7520b1d	66
ea5a08cf RM	67	#define B43_PHY_HT_C1_CLIP1THRES B43_PHY_OFDM(0x00E)
	68	#define B43_PHY_HT_C2_CLIP1THRES B43_PHY_OFDM(0x04E)
	69	#define B43_PHY_HT_C3_CLIP1THRES B43_PHY_OFDM(0x08E)
	70
c750f795	71	#define B43_PHY_HT_RF_SEQ_MODE B43_PHY_EXTG(0x000)
396535e1 RM	72	#define B43_PHY_HT_RF_SEQ_MODE_CA_OVER 0x0001 /* Core active override */
396535e1 RM	73	#define B43_PHY_HT_RF_SEQ_MODE_TR_OVER 0x0002 /* Trigger override */
c750f795 RM	74	#define B43_PHY_HT_RF_SEQ_TRIG B43_PHY_EXTG(0x003)
	75	#define B43_PHY_HT_RF_SEQ_TRIG_RX2TX 0x0001 /* RX2TX */
	76	#define B43_PHY_HT_RF_SEQ_TRIG_TX2RX 0x0002 /* TX2RX */
	77	#define B43_PHY_HT_RF_SEQ_TRIG_UPGH 0x0004 /* Update gain H */
	78	#define B43_PHY_HT_RF_SEQ_TRIG_UPGL 0x0008 /* Update gain L */
	79	#define B43_PHY_HT_RF_SEQ_TRIG_UPGU 0x0010 /* Update gain U */
	80	#define B43_PHY_HT_RF_SEQ_TRIG_RST2RX 0x0020 /* Reset to RX */
	81	#define B43_PHY_HT_RF_SEQ_STATUS B43_PHY_EXTG(0x004)
	82	/* Values for the status are the same as for the trigger */
	83
e7c62552 RM	84	#define B43_PHY_HT_RF_CTL1 B43_PHY_EXTG(0x010)
e7c62552 RM	85
a51ab258 RM	86	#define B43_PHY_HT_RF_CTL_INT_C1 B43_PHY_EXTG(0x04c)
	87	#define B43_PHY_HT_RF_CTL_INT_C2 B43_PHY_EXTG(0x06c)
	88	#define B43_PHY_HT_RF_CTL_INT_C3 B43_PHY_EXTG(0x08c)
	89
47606922 RM	90	#define B43_PHY_HT_AFE_C1_OVER B43_PHY_EXTG(0x110)
	91	#define B43_PHY_HT_AFE_C1 B43_PHY_EXTG(0x111)
	92	#define B43_PHY_HT_AFE_C2_OVER B43_PHY_EXTG(0x114)
	93	#define B43_PHY_HT_AFE_C2 B43_PHY_EXTG(0x115)
	94	#define B43_PHY_HT_AFE_C3_OVER B43_PHY_EXTG(0x118)
	95	#define B43_PHY_HT_AFE_C3 B43_PHY_EXTG(0x119)
a8e82749	96
60e8fb92 RM	97	#define B43_PHY_HT_TXPCTL_CMD_C3 B43_PHY_EXTG(0x164)
60e8fb92 RM	98	#define B43_PHY_HT_TXPCTL_CMD_C3_INIT 0x007F
5949e040 RM	99	#define B43_PHY_HT_TXPCTL_IDLE_TSSI2 B43_PHY_EXTG(0x165) /* TX power control idle TSSI */
	100	#define B43_PHY_HT_TXPCTL_IDLE_TSSI2_C3 0x003F
	101	#define B43_PHY_HT_TXPCTL_IDLE_TSSI2_C3_SHIFT 0
	102	#define B43_PHY_HT_TXPCTL_TARG_PWR2 B43_PHY_EXTG(0x166) /* TX power control target power */
	103	#define B43_PHY_HT_TXPCTL_TARG_PWR2_C3 0x00FF
	104	#define B43_PHY_HT_TXPCTL_TARG_PWR2_C3_SHIFT 0
fc6ab1e0	105	#define B43_PHY_HT_TX_PCTL_STATUS_C3 B43_PHY_EXTG(0x169)
60e8fb92	106
b372afae RM	107	#define B43_PHY_HT_TEST B43_PHY_N_BMODE(0x00A)
b372afae RM	108
d7520b1d	109
5192bf56 RM	110	/* Values for PHY registers used on channel switching */
5192bf56 RM	111	struct b43_phy_ht_channeltab_e_phy {
bdb2dfb2 RM	112	u16 bw1;
	113	u16 bw2;
	114	u16 bw3;
	115	u16 bw4;
	116	u16 bw5;
	117	u16 bw6;
5192bf56 RM	118	};
	119
	120
d7520b1d	121	struct b43_phy_ht {
a51ab258	122	u16 rf_ctl_int_save[3];
60e8fb92 RM	123
	124	bool tx_pwr_ctl;
	125	u8 tx_pwr_idx[3];
371ec465 RM	126
371ec465 RM	127	s32 bb_mult_save[3];
4409a23f RM	128
4409a23f RM	129	u8 idle_tssi[3];
d7520b1d RM	130	};
	131
	132
	133	struct b43_phy_operations;
	134	extern const struct b43_phy_operations b43_phyops_ht;
	135
	136	#endif /* B43_PHY_HT_H_ */