Commit | Line | Data |
---|---|---|
f222313a JL |
1 | #ifndef BCM43xx_H_ |
2 | #define BCM43xx_H_ | |
3 | ||
71c0cd70 | 4 | #include <linux/hw_random.h> |
f222313a JL |
5 | #include <linux/version.h> |
6 | #include <linux/kernel.h> | |
7 | #include <linux/spinlock.h> | |
8 | #include <linux/interrupt.h> | |
9 | #include <linux/stringify.h> | |
10 | #include <linux/pci.h> | |
11 | #include <net/ieee80211.h> | |
12 | #include <net/ieee80211softmac.h> | |
13 | #include <asm/atomic.h> | |
14 | #include <asm/io.h> | |
15 | ||
16 | ||
17 | #include "bcm43xx_debugfs.h" | |
18 | #include "bcm43xx_leds.h" | |
19 | ||
20 | ||
65f3f191 | 21 | #define PFX KBUILD_MODNAME ": " |
f222313a | 22 | |
489423c8 | 23 | #define BCM43xx_SWITCH_CORE_MAX_RETRIES 50 |
f222313a | 24 | #define BCM43xx_IRQWAIT_MAX_RETRIES 50 |
f222313a JL |
25 | |
26 | #define BCM43xx_IO_SIZE 8192 | |
f222313a | 27 | |
489423c8 MB |
28 | /* Active Core PCI Configuration Register. */ |
29 | #define BCM43xx_PCICFG_ACTIVE_CORE 0x80 | |
f222313a JL |
30 | /* SPROM control register. */ |
31 | #define BCM43xx_PCICFG_SPROMCTL 0x88 | |
489423c8 MB |
32 | /* Interrupt Control PCI Configuration Register. (Only on PCI cores with rev >= 6) */ |
33 | #define BCM43xx_PCICFG_ICR 0x94 | |
f222313a JL |
34 | |
35 | /* MMIO offsets */ | |
36 | #define BCM43xx_MMIO_DMA1_REASON 0x20 | |
37 | #define BCM43xx_MMIO_DMA1_IRQ_MASK 0x24 | |
38 | #define BCM43xx_MMIO_DMA2_REASON 0x28 | |
39 | #define BCM43xx_MMIO_DMA2_IRQ_MASK 0x2C | |
40 | #define BCM43xx_MMIO_DMA3_REASON 0x30 | |
41 | #define BCM43xx_MMIO_DMA3_IRQ_MASK 0x34 | |
42 | #define BCM43xx_MMIO_DMA4_REASON 0x38 | |
43 | #define BCM43xx_MMIO_DMA4_IRQ_MASK 0x3C | |
44 | #define BCM43xx_MMIO_STATUS_BITFIELD 0x120 | |
45 | #define BCM43xx_MMIO_STATUS2_BITFIELD 0x124 | |
46 | #define BCM43xx_MMIO_GEN_IRQ_REASON 0x128 | |
47 | #define BCM43xx_MMIO_GEN_IRQ_MASK 0x12C | |
48 | #define BCM43xx_MMIO_RAM_CONTROL 0x130 | |
49 | #define BCM43xx_MMIO_RAM_DATA 0x134 | |
50 | #define BCM43xx_MMIO_PS_STATUS 0x140 | |
51 | #define BCM43xx_MMIO_RADIO_HWENABLED_HI 0x158 | |
52 | #define BCM43xx_MMIO_SHM_CONTROL 0x160 | |
53 | #define BCM43xx_MMIO_SHM_DATA 0x164 | |
54 | #define BCM43xx_MMIO_SHM_DATA_UNALIGNED 0x166 | |
55 | #define BCM43xx_MMIO_XMITSTAT_0 0x170 | |
56 | #define BCM43xx_MMIO_XMITSTAT_1 0x174 | |
57 | #define BCM43xx_MMIO_REV3PLUS_TSF_LOW 0x180 /* core rev >= 3 only */ | |
58 | #define BCM43xx_MMIO_REV3PLUS_TSF_HIGH 0x184 /* core rev >= 3 only */ | |
59 | #define BCM43xx_MMIO_DMA1_BASE 0x200 | |
60 | #define BCM43xx_MMIO_DMA2_BASE 0x220 | |
61 | #define BCM43xx_MMIO_DMA3_BASE 0x240 | |
62 | #define BCM43xx_MMIO_DMA4_BASE 0x260 | |
63 | #define BCM43xx_MMIO_PIO1_BASE 0x300 | |
64 | #define BCM43xx_MMIO_PIO2_BASE 0x310 | |
65 | #define BCM43xx_MMIO_PIO3_BASE 0x320 | |
66 | #define BCM43xx_MMIO_PIO4_BASE 0x330 | |
67 | #define BCM43xx_MMIO_PHY_VER 0x3E0 | |
68 | #define BCM43xx_MMIO_PHY_RADIO 0x3E2 | |
69 | #define BCM43xx_MMIO_ANTENNA 0x3E8 | |
70 | #define BCM43xx_MMIO_CHANNEL 0x3F0 | |
71 | #define BCM43xx_MMIO_CHANNEL_EXT 0x3F4 | |
72 | #define BCM43xx_MMIO_RADIO_CONTROL 0x3F6 | |
73 | #define BCM43xx_MMIO_RADIO_DATA_HIGH 0x3F8 | |
74 | #define BCM43xx_MMIO_RADIO_DATA_LOW 0x3FA | |
75 | #define BCM43xx_MMIO_PHY_CONTROL 0x3FC | |
76 | #define BCM43xx_MMIO_PHY_DATA 0x3FE | |
77 | #define BCM43xx_MMIO_MACFILTER_CONTROL 0x420 | |
78 | #define BCM43xx_MMIO_MACFILTER_DATA 0x422 | |
79 | #define BCM43xx_MMIO_RADIO_HWENABLED_LO 0x49A | |
80 | #define BCM43xx_MMIO_GPIO_CONTROL 0x49C | |
81 | #define BCM43xx_MMIO_GPIO_MASK 0x49E | |
82 | #define BCM43xx_MMIO_TSF_0 0x632 /* core rev < 3 only */ | |
83 | #define BCM43xx_MMIO_TSF_1 0x634 /* core rev < 3 only */ | |
84 | #define BCM43xx_MMIO_TSF_2 0x636 /* core rev < 3 only */ | |
85 | #define BCM43xx_MMIO_TSF_3 0x638 /* core rev < 3 only */ | |
71c0cd70 | 86 | #define BCM43xx_MMIO_RNG 0x65A |
f222313a JL |
87 | #define BCM43xx_MMIO_POWERUP_DELAY 0x6A8 |
88 | ||
89 | /* SPROM offsets. */ | |
90 | #define BCM43xx_SPROM_BASE 0x1000 | |
91 | #define BCM43xx_SPROM_BOARDFLAGS2 0x1c | |
92 | #define BCM43xx_SPROM_IL0MACADDR 0x24 | |
93 | #define BCM43xx_SPROM_ET0MACADDR 0x27 | |
94 | #define BCM43xx_SPROM_ET1MACADDR 0x2a | |
95 | #define BCM43xx_SPROM_ETHPHY 0x2d | |
96 | #define BCM43xx_SPROM_BOARDREV 0x2e | |
97 | #define BCM43xx_SPROM_PA0B0 0x2f | |
98 | #define BCM43xx_SPROM_PA0B1 0x30 | |
99 | #define BCM43xx_SPROM_PA0B2 0x31 | |
100 | #define BCM43xx_SPROM_WL0GPIO0 0x32 | |
101 | #define BCM43xx_SPROM_WL0GPIO2 0x33 | |
102 | #define BCM43xx_SPROM_MAXPWR 0x34 | |
103 | #define BCM43xx_SPROM_PA1B0 0x35 | |
104 | #define BCM43xx_SPROM_PA1B1 0x36 | |
105 | #define BCM43xx_SPROM_PA1B2 0x37 | |
106 | #define BCM43xx_SPROM_IDL_TSSI_TGT 0x38 | |
107 | #define BCM43xx_SPROM_BOARDFLAGS 0x39 | |
108 | #define BCM43xx_SPROM_ANTENNA_GAIN 0x3a | |
109 | #define BCM43xx_SPROM_VERSION 0x3f | |
110 | ||
111 | /* BCM43xx_SPROM_BOARDFLAGS values */ | |
112 | #define BCM43xx_BFL_BTCOEXIST 0x0001 /* implements Bluetooth coexistance */ | |
113 | #define BCM43xx_BFL_PACTRL 0x0002 /* GPIO 9 controlling the PA */ | |
114 | #define BCM43xx_BFL_AIRLINEMODE 0x0004 /* implements GPIO 13 radio disable indication */ | |
115 | #define BCM43xx_BFL_RSSI 0x0008 /* software calculates nrssi slope. */ | |
116 | #define BCM43xx_BFL_ENETSPI 0x0010 /* has ephy roboswitch spi */ | |
117 | #define BCM43xx_BFL_XTAL_NOSLOW 0x0020 /* no slow clock available */ | |
118 | #define BCM43xx_BFL_CCKHIPWR 0x0040 /* can do high power CCK transmission */ | |
119 | #define BCM43xx_BFL_ENETADM 0x0080 /* has ADMtek switch */ | |
120 | #define BCM43xx_BFL_ENETVLAN 0x0100 /* can do vlan */ | |
121 | #define BCM43xx_BFL_AFTERBURNER 0x0200 /* supports Afterburner mode */ | |
122 | #define BCM43xx_BFL_NOPCI 0x0400 /* leaves PCI floating */ | |
123 | #define BCM43xx_BFL_FEM 0x0800 /* supports the Front End Module */ | |
b3db5e55 MB |
124 | #define BCM43xx_BFL_EXTLNA 0x1000 /* has an external LNA */ |
125 | #define BCM43xx_BFL_HGPA 0x2000 /* had high gain PA */ | |
126 | #define BCM43xx_BFL_BTCMOD 0x4000 /* BFL_BTCOEXIST is given in alternate GPIOs */ | |
127 | #define BCM43xx_BFL_ALTIQ 0x8000 /* alternate I/Q settings */ | |
f222313a JL |
128 | |
129 | /* GPIO register offset, in both ChipCommon and PCI core. */ | |
130 | #define BCM43xx_GPIO_CONTROL 0x6c | |
131 | ||
132 | /* SHM Routing */ | |
133 | #define BCM43xx_SHM_SHARED 0x0001 | |
134 | #define BCM43xx_SHM_WIRELESS 0x0002 | |
135 | #define BCM43xx_SHM_PCM 0x0003 | |
136 | #define BCM43xx_SHM_HWMAC 0x0004 | |
137 | #define BCM43xx_SHM_UCODE 0x0300 | |
138 | ||
139 | /* MacFilter offsets. */ | |
140 | #define BCM43xx_MACFILTER_SELF 0x0000 | |
141 | #define BCM43xx_MACFILTER_ASSOC 0x0003 | |
142 | ||
143 | /* Chipcommon registers. */ | |
144 | #define BCM43xx_CHIPCOMMON_CAPABILITIES 0x04 | |
145 | #define BCM43xx_CHIPCOMMON_PLLONDELAY 0xB0 | |
146 | #define BCM43xx_CHIPCOMMON_FREFSELDELAY 0xB4 | |
147 | #define BCM43xx_CHIPCOMMON_SLOWCLKCTL 0xB8 | |
148 | #define BCM43xx_CHIPCOMMON_SYSCLKCTL 0xC0 | |
149 | ||
150 | /* PCI core specific registers. */ | |
151 | #define BCM43xx_PCICORE_BCAST_ADDR 0x50 | |
152 | #define BCM43xx_PCICORE_BCAST_DATA 0x54 | |
153 | #define BCM43xx_PCICORE_SBTOPCI2 0x108 | |
154 | ||
155 | /* SBTOPCI2 values. */ | |
156 | #define BCM43xx_SBTOPCI2_PREFETCH 0x4 | |
157 | #define BCM43xx_SBTOPCI2_BURST 0x8 | |
158 | ||
159 | /* Chipcommon capabilities. */ | |
160 | #define BCM43xx_CAPABILITIES_PCTL 0x00040000 | |
161 | #define BCM43xx_CAPABILITIES_PLLMASK 0x00030000 | |
162 | #define BCM43xx_CAPABILITIES_PLLSHIFT 16 | |
163 | #define BCM43xx_CAPABILITIES_FLASHMASK 0x00000700 | |
164 | #define BCM43xx_CAPABILITIES_FLASHSHIFT 8 | |
165 | #define BCM43xx_CAPABILITIES_EXTBUSPRESENT 0x00000040 | |
166 | #define BCM43xx_CAPABILITIES_UARTGPIO 0x00000020 | |
167 | #define BCM43xx_CAPABILITIES_UARTCLOCKMASK 0x00000018 | |
168 | #define BCM43xx_CAPABILITIES_UARTCLOCKSHIFT 3 | |
169 | #define BCM43xx_CAPABILITIES_MIPSBIGENDIAN 0x00000004 | |
170 | #define BCM43xx_CAPABILITIES_NRUARTSMASK 0x00000003 | |
171 | ||
172 | /* PowerControl */ | |
173 | #define BCM43xx_PCTL_IN 0xB0 | |
174 | #define BCM43xx_PCTL_OUT 0xB4 | |
175 | #define BCM43xx_PCTL_OUTENABLE 0xB8 | |
176 | #define BCM43xx_PCTL_XTAL_POWERUP 0x40 | |
177 | #define BCM43xx_PCTL_PLL_POWERDOWN 0x80 | |
178 | ||
179 | /* PowerControl Clock Modes */ | |
180 | #define BCM43xx_PCTL_CLK_FAST 0x00 | |
181 | #define BCM43xx_PCTL_CLK_SLOW 0x01 | |
182 | #define BCM43xx_PCTL_CLK_DYNAMIC 0x02 | |
183 | ||
184 | #define BCM43xx_PCTL_FORCE_SLOW 0x0800 | |
185 | #define BCM43xx_PCTL_FORCE_PLL 0x1000 | |
186 | #define BCM43xx_PCTL_DYN_XTAL 0x2000 | |
187 | ||
188 | /* COREIDs */ | |
189 | #define BCM43xx_COREID_CHIPCOMMON 0x800 | |
190 | #define BCM43xx_COREID_ILINE20 0x801 | |
191 | #define BCM43xx_COREID_SDRAM 0x803 | |
192 | #define BCM43xx_COREID_PCI 0x804 | |
193 | #define BCM43xx_COREID_MIPS 0x805 | |
194 | #define BCM43xx_COREID_ETHERNET 0x806 | |
195 | #define BCM43xx_COREID_V90 0x807 | |
196 | #define BCM43xx_COREID_USB11_HOSTDEV 0x80a | |
197 | #define BCM43xx_COREID_IPSEC 0x80b | |
198 | #define BCM43xx_COREID_PCMCIA 0x80d | |
199 | #define BCM43xx_COREID_EXT_IF 0x80f | |
200 | #define BCM43xx_COREID_80211 0x812 | |
201 | #define BCM43xx_COREID_MIPS_3302 0x816 | |
202 | #define BCM43xx_COREID_USB11_HOST 0x817 | |
203 | #define BCM43xx_COREID_USB11_DEV 0x818 | |
204 | #define BCM43xx_COREID_USB20_HOST 0x819 | |
205 | #define BCM43xx_COREID_USB20_DEV 0x81a | |
206 | #define BCM43xx_COREID_SDIO_HOST 0x81b | |
207 | ||
208 | /* Core Information Registers */ | |
209 | #define BCM43xx_CIR_BASE 0xf00 | |
210 | #define BCM43xx_CIR_SBTPSFLAG (BCM43xx_CIR_BASE + 0x18) | |
211 | #define BCM43xx_CIR_SBIMSTATE (BCM43xx_CIR_BASE + 0x90) | |
212 | #define BCM43xx_CIR_SBINTVEC (BCM43xx_CIR_BASE + 0x94) | |
213 | #define BCM43xx_CIR_SBTMSTATELOW (BCM43xx_CIR_BASE + 0x98) | |
214 | #define BCM43xx_CIR_SBTMSTATEHIGH (BCM43xx_CIR_BASE + 0x9c) | |
215 | #define BCM43xx_CIR_SBIMCONFIGLOW (BCM43xx_CIR_BASE + 0xa8) | |
216 | #define BCM43xx_CIR_SB_ID_HI (BCM43xx_CIR_BASE + 0xfc) | |
217 | ||
218 | /* Mask to get the Backplane Flag Number from SBTPSFLAG. */ | |
219 | #define BCM43xx_BACKPLANE_FLAG_NR_MASK 0x3f | |
220 | ||
221 | /* SBIMCONFIGLOW values/masks. */ | |
222 | #define BCM43xx_SBIMCONFIGLOW_SERVICE_TOUT_MASK 0x00000007 | |
223 | #define BCM43xx_SBIMCONFIGLOW_SERVICE_TOUT_SHIFT 0 | |
224 | #define BCM43xx_SBIMCONFIGLOW_REQUEST_TOUT_MASK 0x00000070 | |
225 | #define BCM43xx_SBIMCONFIGLOW_REQUEST_TOUT_SHIFT 4 | |
226 | #define BCM43xx_SBIMCONFIGLOW_CONNID_MASK 0x00ff0000 | |
227 | #define BCM43xx_SBIMCONFIGLOW_CONNID_SHIFT 16 | |
228 | ||
229 | /* sbtmstatelow state flags */ | |
230 | #define BCM43xx_SBTMSTATELOW_RESET 0x01 | |
231 | #define BCM43xx_SBTMSTATELOW_REJECT 0x02 | |
232 | #define BCM43xx_SBTMSTATELOW_CLOCK 0x10000 | |
233 | #define BCM43xx_SBTMSTATELOW_FORCE_GATE_CLOCK 0x20000 | |
234 | ||
235 | /* sbtmstatehigh state flags */ | |
236 | #define BCM43xx_SBTMSTATEHIGH_SERROR 0x1 | |
237 | #define BCM43xx_SBTMSTATEHIGH_BUSY 0x4 | |
238 | ||
239 | /* sbimstate flags */ | |
240 | #define BCM43xx_SBIMSTATE_IB_ERROR 0x20000 | |
241 | #define BCM43xx_SBIMSTATE_TIMEOUT 0x40000 | |
242 | ||
243 | /* PHYVersioning */ | |
244 | #define BCM43xx_PHYTYPE_A 0x00 | |
245 | #define BCM43xx_PHYTYPE_B 0x01 | |
246 | #define BCM43xx_PHYTYPE_G 0x02 | |
247 | ||
248 | /* PHYRegisters */ | |
249 | #define BCM43xx_PHY_ILT_A_CTRL 0x0072 | |
250 | #define BCM43xx_PHY_ILT_A_DATA1 0x0073 | |
251 | #define BCM43xx_PHY_ILT_A_DATA2 0x0074 | |
252 | #define BCM43xx_PHY_G_LO_CONTROL 0x0810 | |
253 | #define BCM43xx_PHY_ILT_G_CTRL 0x0472 | |
254 | #define BCM43xx_PHY_ILT_G_DATA1 0x0473 | |
255 | #define BCM43xx_PHY_ILT_G_DATA2 0x0474 | |
256 | #define BCM43xx_PHY_A_PCTL 0x007B | |
257 | #define BCM43xx_PHY_G_PCTL 0x0029 | |
258 | #define BCM43xx_PHY_A_CRS 0x0029 | |
259 | #define BCM43xx_PHY_RADIO_BITFIELD 0x0401 | |
260 | #define BCM43xx_PHY_G_CRS 0x0429 | |
261 | #define BCM43xx_PHY_NRSSILT_CTRL 0x0803 | |
262 | #define BCM43xx_PHY_NRSSILT_DATA 0x0804 | |
263 | ||
264 | /* RadioRegisters */ | |
265 | #define BCM43xx_RADIOCTL_ID 0x01 | |
266 | ||
267 | /* StatusBitField */ | |
268 | #define BCM43xx_SBF_MAC_ENABLED 0x00000001 | |
269 | #define BCM43xx_SBF_2 0x00000002 /*FIXME: fix name*/ | |
270 | #define BCM43xx_SBF_CORE_READY 0x00000004 | |
271 | #define BCM43xx_SBF_400 0x00000400 /*FIXME: fix name*/ | |
272 | #define BCM43xx_SBF_4000 0x00004000 /*FIXME: fix name*/ | |
273 | #define BCM43xx_SBF_8000 0x00008000 /*FIXME: fix name*/ | |
274 | #define BCM43xx_SBF_XFER_REG_BYTESWAP 0x00010000 | |
275 | #define BCM43xx_SBF_MODE_NOTADHOC 0x00020000 | |
276 | #define BCM43xx_SBF_MODE_AP 0x00040000 | |
277 | #define BCM43xx_SBF_RADIOREG_LOCK 0x00080000 | |
278 | #define BCM43xx_SBF_MODE_MONITOR 0x00400000 | |
279 | #define BCM43xx_SBF_MODE_PROMISC 0x01000000 | |
280 | #define BCM43xx_SBF_PS1 0x02000000 | |
281 | #define BCM43xx_SBF_PS2 0x04000000 | |
282 | #define BCM43xx_SBF_NO_SSID_BCAST 0x08000000 | |
283 | #define BCM43xx_SBF_TIME_UPDATE 0x10000000 | |
284 | #define BCM43xx_SBF_80000000 0x80000000 /*FIXME: fix name*/ | |
285 | ||
286 | /* MicrocodeFlagsBitfield (addr + lo-word values?)*/ | |
287 | #define BCM43xx_UCODEFLAGS_OFFSET 0x005E | |
288 | ||
289 | #define BCM43xx_UCODEFLAG_AUTODIV 0x0001 | |
290 | #define BCM43xx_UCODEFLAG_UNKBGPHY 0x0002 | |
291 | #define BCM43xx_UCODEFLAG_UNKBPHY 0x0004 | |
292 | #define BCM43xx_UCODEFLAG_UNKGPHY 0x0020 | |
293 | #define BCM43xx_UCODEFLAG_UNKPACTRL 0x0040 | |
294 | #define BCM43xx_UCODEFLAG_JAPAN 0x0080 | |
295 | ||
296 | /* Generic-Interrupt reasons. */ | |
297 | #define BCM43xx_IRQ_READY (1 << 0) | |
298 | #define BCM43xx_IRQ_BEACON (1 << 1) | |
299 | #define BCM43xx_IRQ_PS (1 << 2) | |
300 | #define BCM43xx_IRQ_REG124 (1 << 5) | |
301 | #define BCM43xx_IRQ_PMQ (1 << 6) | |
302 | #define BCM43xx_IRQ_PIO_WORKAROUND (1 << 8) | |
303 | #define BCM43xx_IRQ_XMIT_ERROR (1 << 11) | |
304 | #define BCM43xx_IRQ_RX (1 << 15) | |
305 | #define BCM43xx_IRQ_SCAN (1 << 16) | |
306 | #define BCM43xx_IRQ_NOISE (1 << 18) | |
307 | #define BCM43xx_IRQ_XMIT_STATUS (1 << 29) | |
308 | ||
309 | #define BCM43xx_IRQ_ALL 0xffffffff | |
310 | #define BCM43xx_IRQ_INITIAL (BCM43xx_IRQ_PS | \ | |
311 | BCM43xx_IRQ_REG124 | \ | |
312 | BCM43xx_IRQ_PMQ | \ | |
313 | BCM43xx_IRQ_XMIT_ERROR | \ | |
314 | BCM43xx_IRQ_RX | \ | |
315 | BCM43xx_IRQ_SCAN | \ | |
316 | BCM43xx_IRQ_NOISE | \ | |
317 | BCM43xx_IRQ_XMIT_STATUS) | |
318 | ||
319 | ||
320 | /* Initial default iw_mode */ | |
321 | #define BCM43xx_INITIAL_IWMODE IW_MODE_INFRA | |
322 | ||
f222313a JL |
323 | /* Bus type PCI. */ |
324 | #define BCM43xx_BUSTYPE_PCI 0 | |
325 | /* Bus type Silicone Backplane Bus. */ | |
326 | #define BCM43xx_BUSTYPE_SB 1 | |
327 | /* Bus type PCMCIA. */ | |
328 | #define BCM43xx_BUSTYPE_PCMCIA 2 | |
329 | ||
330 | /* Threshold values. */ | |
331 | #define BCM43xx_MIN_RTS_THRESHOLD 1U | |
332 | #define BCM43xx_MAX_RTS_THRESHOLD 2304U | |
333 | #define BCM43xx_DEFAULT_RTS_THRESHOLD BCM43xx_MAX_RTS_THRESHOLD | |
334 | ||
335 | #define BCM43xx_DEFAULT_SHORT_RETRY_LIMIT 7 | |
336 | #define BCM43xx_DEFAULT_LONG_RETRY_LIMIT 4 | |
337 | ||
338 | /* Max size of a security key */ | |
339 | #define BCM43xx_SEC_KEYSIZE 16 | |
340 | /* Security algorithms. */ | |
341 | enum { | |
342 | BCM43xx_SEC_ALGO_NONE = 0, /* unencrypted, as of TX header. */ | |
343 | BCM43xx_SEC_ALGO_WEP, | |
344 | BCM43xx_SEC_ALGO_UNKNOWN, | |
345 | BCM43xx_SEC_ALGO_AES, | |
346 | BCM43xx_SEC_ALGO_WEP104, | |
347 | BCM43xx_SEC_ALGO_TKIP, | |
348 | }; | |
349 | ||
350 | #ifdef assert | |
351 | # undef assert | |
352 | #endif | |
353 | #ifdef CONFIG_BCM43XX_DEBUG | |
354 | #define assert(expr) \ | |
355 | do { \ | |
356 | if (unlikely(!(expr))) { \ | |
357 | printk(KERN_ERR PFX "ASSERTION FAILED (%s) at: %s:%d:%s()\n", \ | |
358 | #expr, __FILE__, __LINE__, __FUNCTION__); \ | |
359 | } \ | |
360 | } while (0) | |
361 | #else | |
362 | #define assert(expr) do { /* nothing */ } while (0) | |
363 | #endif | |
364 | ||
365 | /* rate limited printk(). */ | |
366 | #ifdef printkl | |
367 | # undef printkl | |
368 | #endif | |
369 | #define printkl(f, x...) do { if (printk_ratelimit()) printk(f ,##x); } while (0) | |
370 | /* rate limited printk() for debugging */ | |
371 | #ifdef dprintkl | |
372 | # undef dprintkl | |
373 | #endif | |
374 | #ifdef CONFIG_BCM43XX_DEBUG | |
375 | # define dprintkl printkl | |
376 | #else | |
377 | # define dprintkl(f, x...) do { /* nothing */ } while (0) | |
378 | #endif | |
379 | ||
380 | /* Helper macro for if branches. | |
381 | * An if branch marked with this macro is only taken in DEBUG mode. | |
382 | * Example: | |
383 | * if (DEBUG_ONLY(foo == bar)) { | |
384 | * do something | |
385 | * } | |
386 | * In DEBUG mode, the branch will be taken if (foo == bar). | |
387 | * In non-DEBUG mode, the branch will never be taken. | |
388 | */ | |
389 | #ifdef DEBUG_ONLY | |
390 | # undef DEBUG_ONLY | |
391 | #endif | |
392 | #ifdef CONFIG_BCM43XX_DEBUG | |
393 | # define DEBUG_ONLY(x) (x) | |
394 | #else | |
395 | # define DEBUG_ONLY(x) 0 | |
396 | #endif | |
397 | ||
398 | /* debugging printk() */ | |
399 | #ifdef dprintk | |
400 | # undef dprintk | |
401 | #endif | |
402 | #ifdef CONFIG_BCM43XX_DEBUG | |
403 | # define dprintk(f, x...) do { printk(f ,##x); } while (0) | |
404 | #else | |
405 | # define dprintk(f, x...) do { /* nothing */ } while (0) | |
406 | #endif | |
407 | ||
408 | ||
409 | struct net_device; | |
410 | struct pci_dev; | |
f222313a JL |
411 | struct bcm43xx_dmaring; |
412 | struct bcm43xx_pioqueue; | |
413 | ||
414 | struct bcm43xx_initval { | |
415 | u16 offset; | |
416 | u16 size; | |
417 | u32 value; | |
418 | } __attribute__((__packed__)); | |
419 | ||
420 | /* Values for bcm430x_sprominfo.locale */ | |
421 | enum { | |
422 | BCM43xx_LOCALE_WORLD = 0, | |
423 | BCM43xx_LOCALE_THAILAND, | |
424 | BCM43xx_LOCALE_ISRAEL, | |
425 | BCM43xx_LOCALE_JORDAN, | |
426 | BCM43xx_LOCALE_CHINA, | |
427 | BCM43xx_LOCALE_JAPAN, | |
428 | BCM43xx_LOCALE_USA_CANADA_ANZ, | |
429 | BCM43xx_LOCALE_EUROPE, | |
430 | BCM43xx_LOCALE_USA_LOW, | |
431 | BCM43xx_LOCALE_JAPAN_HIGH, | |
432 | BCM43xx_LOCALE_ALL, | |
433 | BCM43xx_LOCALE_NONE, | |
434 | }; | |
435 | ||
436 | #define BCM43xx_SPROM_SIZE 64 /* in 16-bit words. */ | |
437 | struct bcm43xx_sprominfo { | |
438 | u16 boardflags2; | |
439 | u8 il0macaddr[6]; | |
440 | u8 et0macaddr[6]; | |
441 | u8 et1macaddr[6]; | |
442 | u8 et0phyaddr:5; | |
443 | u8 et1phyaddr:5; | |
444 | u8 et0mdcport:1; | |
445 | u8 et1mdcport:1; | |
446 | u8 boardrev; | |
447 | u8 locale:4; | |
448 | u8 antennas_aphy:2; | |
449 | u8 antennas_bgphy:2; | |
450 | u16 pa0b0; | |
451 | u16 pa0b1; | |
452 | u16 pa0b2; | |
453 | u8 wl0gpio0; | |
454 | u8 wl0gpio1; | |
455 | u8 wl0gpio2; | |
456 | u8 wl0gpio3; | |
457 | u8 maxpower_aphy; | |
458 | u8 maxpower_bgphy; | |
459 | u16 pa1b0; | |
460 | u16 pa1b1; | |
461 | u16 pa1b2; | |
462 | u8 idle_tssi_tgt_aphy; | |
463 | u8 idle_tssi_tgt_bgphy; | |
464 | u16 boardflags; | |
465 | u16 antennagain_aphy; | |
466 | u16 antennagain_bgphy; | |
467 | }; | |
468 | ||
469 | /* Value pair to measure the LocalOscillator. */ | |
470 | struct bcm43xx_lopair { | |
471 | s8 low; | |
472 | s8 high; | |
473 | u8 used:1; | |
474 | }; | |
475 | #define BCM43xx_LO_COUNT (14*4) | |
476 | ||
477 | struct bcm43xx_phyinfo { | |
478 | /* Hardware Data */ | |
479 | u8 version; | |
480 | u8 type; | |
481 | u8 rev; | |
482 | u16 antenna_diversity; | |
483 | u16 savedpctlreg; | |
484 | u16 minlowsig[2]; | |
485 | u16 minlowsigpos[2]; | |
486 | u8 connected:1, | |
487 | calibrated:1, | |
488 | is_locked:1, /* used in bcm43xx_phy_{un}lock() */ | |
489 | dyn_tssi_tbl:1; /* used in bcm43xx_phy_init_tssi2dbm_table() */ | |
490 | /* LO Measurement Data. | |
491 | * Use bcm43xx_get_lopair() to get a value. | |
492 | */ | |
493 | struct bcm43xx_lopair *_lo_pairs; | |
494 | ||
495 | /* TSSI to dBm table in use */ | |
496 | const s8 *tssi2dbm; | |
497 | /* idle TSSI value */ | |
498 | s8 idle_tssi; | |
adc40e97 MB |
499 | |
500 | /* Values from bcm43xx_calc_loopback_gain() */ | |
501 | u16 loopback_gain[2]; | |
502 | ||
f222313a JL |
503 | /* PHY lock for core.rev < 3 |
504 | * This lock is only used by bcm43xx_phy_{un}lock() | |
505 | */ | |
506 | spinlock_t lock; | |
507 | }; | |
508 | ||
509 | ||
510 | struct bcm43xx_radioinfo { | |
511 | u16 manufact; | |
512 | u16 version; | |
513 | u8 revision; | |
514 | ||
393344f6 MB |
515 | /* Desired TX power in dBm Q5.2 */ |
516 | u16 txpower_desired; | |
6ecb2690 MB |
517 | /* TX Power control values. */ |
518 | union { | |
519 | /* B/G PHY */ | |
520 | struct { | |
521 | u16 baseband_atten; | |
522 | u16 radio_atten; | |
523 | u16 txctl1; | |
524 | u16 txctl2; | |
525 | }; | |
526 | /* A PHY */ | |
527 | struct { | |
528 | u16 txpwr_offset; | |
529 | }; | |
530 | }; | |
531 | ||
f222313a JL |
532 | /* Current Interference Mitigation mode */ |
533 | int interfmode; | |
e382c234 MB |
534 | /* Stack of saved values from the Interference Mitigation code. |
535 | * Each value in the stack is layed out as follows: | |
536 | * bit 0-11: offset | |
537 | * bit 12-15: register ID | |
538 | * bit 16-32: value | |
539 | * register ID is: 0x1 PHY, 0x2 Radio, 0x3 ILT | |
540 | */ | |
541 | #define BCM43xx_INTERFSTACK_SIZE 26 | |
542 | u32 interfstack[BCM43xx_INTERFSTACK_SIZE]; | |
543 | ||
f222313a JL |
544 | /* Saved values from the NRSSI Slope calculation */ |
545 | s16 nrssi[2]; | |
546 | s32 nrssislope; | |
547 | /* In memory nrssi lookup table. */ | |
548 | s8 nrssi_lt[64]; | |
549 | ||
550 | /* current channel */ | |
551 | u8 channel; | |
552 | u8 initial_channel; | |
553 | ||
554 | u16 lofcal; | |
555 | ||
556 | u16 initval; | |
557 | ||
558 | u8 enabled:1; | |
559 | /* ACI (adjacent channel interference) flags. */ | |
560 | u8 aci_enable:1, | |
561 | aci_wlan_automatic:1, | |
562 | aci_hw_rssi:1; | |
563 | }; | |
564 | ||
565 | /* Data structures for DMA transmission, per 80211 core. */ | |
566 | struct bcm43xx_dma { | |
567 | struct bcm43xx_dmaring *tx_ring0; | |
568 | struct bcm43xx_dmaring *tx_ring1; | |
569 | struct bcm43xx_dmaring *tx_ring2; | |
570 | struct bcm43xx_dmaring *tx_ring3; | |
571 | struct bcm43xx_dmaring *rx_ring0; | |
572 | struct bcm43xx_dmaring *rx_ring1; /* only available on core.rev < 5 */ | |
573 | }; | |
574 | ||
575 | /* Data structures for PIO transmission, per 80211 core. */ | |
576 | struct bcm43xx_pio { | |
577 | struct bcm43xx_pioqueue *queue0; | |
578 | struct bcm43xx_pioqueue *queue1; | |
579 | struct bcm43xx_pioqueue *queue2; | |
580 | struct bcm43xx_pioqueue *queue3; | |
581 | }; | |
582 | ||
583 | #define BCM43xx_MAX_80211_CORES 2 | |
584 | ||
f222313a JL |
585 | #ifdef CONFIG_BCM947XX |
586 | #define core_offset(bcm) (bcm)->current_core_offset | |
587 | #else | |
588 | #define core_offset(bcm) 0 | |
589 | #endif | |
590 | ||
e9357c05 | 591 | /* Generic information about a core. */ |
f222313a | 592 | struct bcm43xx_coreinfo { |
e9357c05 MB |
593 | u8 available:1, |
594 | enabled:1, | |
595 | initialized:1; | |
f222313a JL |
596 | /** core_id ID number */ |
597 | u16 id; | |
598 | /** core_rev revision number */ | |
599 | u8 rev; | |
600 | /** Index number for _switch_core() */ | |
601 | u8 index; | |
e9357c05 MB |
602 | }; |
603 | ||
604 | /* Additional information for each 80211 core. */ | |
605 | struct bcm43xx_coreinfo_80211 { | |
606 | /* PHY device. */ | |
607 | struct bcm43xx_phyinfo phy; | |
608 | /* Radio device. */ | |
609 | struct bcm43xx_radioinfo radio; | |
610 | union { | |
611 | /* DMA context. */ | |
612 | struct bcm43xx_dma dma; | |
613 | /* PIO context. */ | |
614 | struct bcm43xx_pio pio; | |
615 | }; | |
f222313a JL |
616 | }; |
617 | ||
618 | /* Context information for a noise calculation (Link Quality). */ | |
619 | struct bcm43xx_noise_calculation { | |
620 | struct bcm43xx_coreinfo *core_at_start; | |
621 | u8 channel_at_start; | |
622 | u8 calculation_running:1; | |
623 | u8 nr_samples; | |
624 | s8 samples[8][4]; | |
625 | }; | |
626 | ||
627 | struct bcm43xx_stats { | |
628 | u8 link_quality; | |
72fb851e MB |
629 | u8 noise; |
630 | struct iw_statistics wstats; | |
f222313a JL |
631 | /* Store the last TX/RX times here for updating the leds. */ |
632 | unsigned long last_tx; | |
633 | unsigned long last_rx; | |
634 | }; | |
635 | ||
636 | struct bcm43xx_key { | |
637 | u8 enabled:1; | |
638 | u8 algorithm; | |
639 | }; | |
640 | ||
78ff56a0 MB |
641 | /* Driver initialization status. */ |
642 | enum { | |
643 | BCM43xx_STAT_UNINIT, /* Uninitialized. */ | |
644 | BCM43xx_STAT_INITIALIZING, /* init_board() in progress. */ | |
645 | BCM43xx_STAT_INITIALIZED, /* Fully operational. */ | |
646 | BCM43xx_STAT_SHUTTINGDOWN, /* free_board() in progress. */ | |
647 | BCM43xx_STAT_RESTARTING, /* controller_restart() called. */ | |
648 | }; | |
649 | #define bcm43xx_status(bcm) atomic_read(&(bcm)->init_status) | |
650 | #define bcm43xx_set_status(bcm, stat) atomic_set(&(bcm)->init_status, (stat)) | |
651 | ||
efa6a370 MB |
652 | /* *** THEORY OF LOCKING *** |
653 | * | |
654 | * We have two different locks in the bcm43xx driver. | |
655 | * => bcm->mutex: General sleeping mutex. Protects struct bcm43xx_private | |
656 | * and the device registers. This mutex does _not_ protect | |
657 | * against concurrency from the IRQ handler. | |
658 | * => bcm->irq_lock: IRQ spinlock. Protects against IRQ handler concurrency. | |
659 | * | |
660 | * Please note that, if you only take the irq_lock, you are not protected | |
661 | * against concurrency from the periodic work handlers. | |
662 | * Most times you want to take _both_ locks. | |
663 | */ | |
664 | ||
f222313a JL |
665 | struct bcm43xx_private { |
666 | struct ieee80211_device *ieee; | |
667 | struct ieee80211softmac_device *softmac; | |
668 | ||
669 | struct net_device *net_dev; | |
670 | struct pci_dev *pci_dev; | |
671 | unsigned int irq; | |
672 | ||
673 | void __iomem *mmio_addr; | |
f222313a | 674 | |
78ff56a0 MB |
675 | spinlock_t irq_lock; |
676 | struct mutex mutex; | |
f222313a | 677 | |
78ff56a0 MB |
678 | /* Driver initialization status BCM43xx_STAT_*** */ |
679 | atomic_t init_status; | |
680 | ||
681 | u16 was_initialized:1, /* for PCI suspend/resume. */ | |
77db31ea | 682 | __using_pio:1, /* Internal, use bcm43xx_using_pio(). */ |
f222313a JL |
683 | bad_frames_preempt:1, /* Use "Bad Frames Preemption" (default off) */ |
684 | reg124_set_0x4:1, /* Some variable to keep track of IRQ stuff. */ | |
f222313a JL |
685 | short_preamble:1, /* TRUE, if short preamble is enabled. */ |
686 | firmware_norelease:1; /* Do not release the firmware. Used on suspend. */ | |
687 | ||
688 | struct bcm43xx_stats stats; | |
689 | ||
690 | /* Bus type we are connected to. | |
691 | * This is currently always BCM43xx_BUSTYPE_PCI | |
692 | */ | |
693 | u8 bustype; | |
694 | ||
695 | u16 board_vendor; | |
696 | u16 board_type; | |
697 | u16 board_revision; | |
698 | ||
699 | u16 chip_id; | |
700 | u8 chip_rev; | |
adc40e97 | 701 | u8 chip_package; |
f222313a JL |
702 | |
703 | struct bcm43xx_sprominfo sprom; | |
704 | #define BCM43xx_NR_LEDS 4 | |
705 | struct bcm43xx_led leds[BCM43xx_NR_LEDS]; | |
efa6a370 | 706 | spinlock_t leds_lock; |
f222313a | 707 | |
e9357c05 | 708 | /* The currently active core. */ |
f222313a JL |
709 | struct bcm43xx_coreinfo *current_core; |
710 | #ifdef CONFIG_BCM947XX | |
711 | /** current core memory offset */ | |
712 | u32 current_core_offset; | |
713 | #endif | |
714 | struct bcm43xx_coreinfo *active_80211_core; | |
715 | /* coreinfo structs for all possible cores follow. | |
716 | * Note that a core might not exist. | |
717 | * So check the coreinfo flags before using it. | |
718 | */ | |
719 | struct bcm43xx_coreinfo core_chipcommon; | |
720 | struct bcm43xx_coreinfo core_pci; | |
f222313a | 721 | struct bcm43xx_coreinfo core_80211[ BCM43xx_MAX_80211_CORES ]; |
e9357c05 MB |
722 | /* Additional information, specific to the 80211 cores. */ |
723 | struct bcm43xx_coreinfo_80211 core_80211_ext[ BCM43xx_MAX_80211_CORES ]; | |
724 | /* Index of the current 80211 core. If current_core is not | |
725 | * an 80211 core, this is -1. | |
726 | */ | |
727 | int current_80211_core_idx; | |
728 | /* Number of available 80211 cores. */ | |
729 | int nr_80211_available; | |
f222313a JL |
730 | |
731 | u32 chipcommon_capabilities; | |
732 | ||
733 | /* Reason code of the last interrupt. */ | |
734 | u32 irq_reason; | |
735 | u32 dma_reason[4]; | |
736 | /* saved irq enable/disable state bitfield. */ | |
737 | u32 irq_savedstate; | |
738 | /* Link Quality calculation context. */ | |
739 | struct bcm43xx_noise_calculation noisecalc; | |
740 | ||
741 | /* Threshold values. */ | |
742 | //TODO: The RTS thr has to be _used_. Currently, it is only set via WX. | |
743 | u32 rts_threshold; | |
744 | ||
745 | /* Interrupt Service Routine tasklet (bottom-half) */ | |
746 | struct tasklet_struct isr_tasklet; | |
f222313a JL |
747 | |
748 | /* Periodic tasks */ | |
78ff56a0 | 749 | struct work_struct periodic_work; |
ab4977f8 | 750 | unsigned int periodic_state; |
f222313a JL |
751 | |
752 | struct work_struct restart_work; | |
753 | ||
754 | /* Informational stuff. */ | |
755 | char nick[IW_ESSID_MAX_SIZE + 1]; | |
756 | ||
757 | /* encryption/decryption */ | |
758 | u16 security_offset; | |
759 | struct bcm43xx_key key[54]; | |
760 | u8 default_key_idx; | |
761 | ||
762 | /* Firmware. */ | |
763 | const struct firmware *ucode; | |
764 | const struct firmware *pcm; | |
765 | const struct firmware *initvals0; | |
766 | const struct firmware *initvals1; | |
767 | ||
71c0cd70 MB |
768 | /* Random Number Generator. */ |
769 | struct hwrng rng; | |
770 | char rng_name[20 + 1]; | |
771 | ||
f222313a JL |
772 | /* Debugging stuff follows. */ |
773 | #ifdef CONFIG_BCM43XX_DEBUG | |
774 | struct bcm43xx_dfsentry *dfsentry; | |
f222313a JL |
775 | #endif |
776 | }; | |
777 | ||
78ff56a0 | 778 | |
f222313a JL |
779 | static inline |
780 | struct bcm43xx_private * bcm43xx_priv(struct net_device *dev) | |
781 | { | |
782 | return ieee80211softmac_priv(dev); | |
783 | } | |
784 | ||
b35d649c MB |
785 | struct device; |
786 | ||
787 | static inline | |
788 | struct bcm43xx_private * dev_to_bcm(struct device *dev) | |
789 | { | |
790 | struct net_device *net_dev; | |
791 | struct bcm43xx_private *bcm; | |
792 | ||
793 | net_dev = dev_get_drvdata(dev); | |
794 | bcm = bcm43xx_priv(net_dev); | |
795 | ||
796 | return bcm; | |
797 | } | |
798 | ||
77db31ea MB |
799 | |
800 | /* Helper function, which returns a boolean. | |
801 | * TRUE, if PIO is used; FALSE, if DMA is used. | |
802 | */ | |
803 | #if defined(CONFIG_BCM43XX_DMA) && defined(CONFIG_BCM43XX_PIO) | |
804 | static inline | |
805 | int bcm43xx_using_pio(struct bcm43xx_private *bcm) | |
806 | { | |
807 | return bcm->__using_pio; | |
808 | } | |
809 | #elif defined(CONFIG_BCM43XX_DMA) | |
810 | static inline | |
811 | int bcm43xx_using_pio(struct bcm43xx_private *bcm) | |
812 | { | |
813 | return 0; | |
814 | } | |
815 | #elif defined(CONFIG_BCM43XX_PIO) | |
816 | static inline | |
817 | int bcm43xx_using_pio(struct bcm43xx_private *bcm) | |
818 | { | |
819 | return 1; | |
820 | } | |
821 | #else | |
822 | # error "Using neither DMA nor PIO? Confused..." | |
823 | #endif | |
824 | ||
e9357c05 MB |
825 | /* Helper functions to access data structures private to the 80211 cores. |
826 | * Note that we _must_ have an 80211 core mapped when calling | |
827 | * any of these functions. | |
828 | */ | |
f222313a | 829 | static inline |
e9357c05 | 830 | struct bcm43xx_pio * bcm43xx_current_pio(struct bcm43xx_private *bcm) |
f222313a | 831 | { |
e9357c05 MB |
832 | assert(bcm43xx_using_pio(bcm)); |
833 | assert(bcm->current_80211_core_idx >= 0); | |
834 | assert(bcm->current_80211_core_idx < BCM43xx_MAX_80211_CORES); | |
835 | return &(bcm->core_80211_ext[bcm->current_80211_core_idx].pio); | |
836 | } | |
837 | static inline | |
838 | struct bcm43xx_dma * bcm43xx_current_dma(struct bcm43xx_private *bcm) | |
839 | { | |
840 | assert(!bcm43xx_using_pio(bcm)); | |
841 | assert(bcm->current_80211_core_idx >= 0); | |
842 | assert(bcm->current_80211_core_idx < BCM43xx_MAX_80211_CORES); | |
843 | return &(bcm->core_80211_ext[bcm->current_80211_core_idx].dma); | |
844 | } | |
845 | static inline | |
846 | struct bcm43xx_phyinfo * bcm43xx_current_phy(struct bcm43xx_private *bcm) | |
847 | { | |
848 | assert(bcm->current_80211_core_idx >= 0); | |
849 | assert(bcm->current_80211_core_idx < BCM43xx_MAX_80211_CORES); | |
850 | return &(bcm->core_80211_ext[bcm->current_80211_core_idx].phy); | |
851 | } | |
852 | static inline | |
853 | struct bcm43xx_radioinfo * bcm43xx_current_radio(struct bcm43xx_private *bcm) | |
854 | { | |
855 | assert(bcm->current_80211_core_idx >= 0); | |
856 | assert(bcm->current_80211_core_idx < BCM43xx_MAX_80211_CORES); | |
857 | return &(bcm->core_80211_ext[bcm->current_80211_core_idx].radio); | |
f222313a JL |
858 | } |
859 | ||
f222313a JL |
860 | |
861 | static inline | |
862 | struct bcm43xx_lopair * bcm43xx_get_lopair(struct bcm43xx_phyinfo *phy, | |
863 | u16 radio_attenuation, | |
864 | u16 baseband_attenuation) | |
865 | { | |
866 | return phy->_lo_pairs + (radio_attenuation + 14 * (baseband_attenuation / 2)); | |
867 | } | |
868 | ||
869 | ||
f222313a JL |
870 | static inline |
871 | u16 bcm43xx_read16(struct bcm43xx_private *bcm, u16 offset) | |
872 | { | |
7ce942d0 | 873 | return ioread16(bcm->mmio_addr + core_offset(bcm) + offset); |
f222313a JL |
874 | } |
875 | ||
876 | static inline | |
877 | void bcm43xx_write16(struct bcm43xx_private *bcm, u16 offset, u16 value) | |
878 | { | |
879 | iowrite16(value, bcm->mmio_addr + core_offset(bcm) + offset); | |
f222313a JL |
880 | } |
881 | ||
882 | static inline | |
883 | u32 bcm43xx_read32(struct bcm43xx_private *bcm, u16 offset) | |
884 | { | |
7ce942d0 | 885 | return ioread32(bcm->mmio_addr + core_offset(bcm) + offset); |
f222313a JL |
886 | } |
887 | ||
888 | static inline | |
889 | void bcm43xx_write32(struct bcm43xx_private *bcm, u16 offset, u32 value) | |
890 | { | |
891 | iowrite32(value, bcm->mmio_addr + core_offset(bcm) + offset); | |
f222313a JL |
892 | } |
893 | ||
894 | static inline | |
895 | int bcm43xx_pci_read_config16(struct bcm43xx_private *bcm, int offset, u16 *value) | |
896 | { | |
7ce942d0 | 897 | return pci_read_config_word(bcm->pci_dev, offset, value); |
f222313a JL |
898 | } |
899 | ||
900 | static inline | |
901 | int bcm43xx_pci_read_config32(struct bcm43xx_private *bcm, int offset, u32 *value) | |
902 | { | |
7ce942d0 | 903 | return pci_read_config_dword(bcm->pci_dev, offset, value); |
f222313a JL |
904 | } |
905 | ||
906 | static inline | |
907 | int bcm43xx_pci_write_config16(struct bcm43xx_private *bcm, int offset, u16 value) | |
908 | { | |
7ce942d0 | 909 | return pci_write_config_word(bcm->pci_dev, offset, value); |
f222313a JL |
910 | } |
911 | ||
912 | static inline | |
913 | int bcm43xx_pci_write_config32(struct bcm43xx_private *bcm, int offset, u32 value) | |
914 | { | |
7ce942d0 | 915 | return pci_write_config_dword(bcm->pci_dev, offset, value); |
f222313a JL |
916 | } |
917 | ||
f222313a JL |
918 | /** Limit a value between two limits */ |
919 | #ifdef limit_value | |
920 | # undef limit_value | |
921 | #endif | |
922 | #define limit_value(value, min, max) \ | |
923 | ({ \ | |
924 | typeof(value) __value = (value); \ | |
925 | typeof(value) __min = (min); \ | |
926 | typeof(value) __max = (max); \ | |
927 | if (__value < __min) \ | |
928 | __value = __min; \ | |
929 | else if (__value > __max) \ | |
930 | __value = __max; \ | |
931 | __value; \ | |
932 | }) | |
933 | ||
f398f02d MB |
934 | /** Helpers to print MAC addresses. */ |
935 | #define BCM43xx_MACFMT "%02x:%02x:%02x:%02x:%02x:%02x" | |
936 | #define BCM43xx_MACARG(x) ((u8*)(x))[0], ((u8*)(x))[1], \ | |
937 | ((u8*)(x))[2], ((u8*)(x))[3], \ | |
938 | ((u8*)(x))[4], ((u8*)(x))[5] | |
939 | ||
f222313a | 940 | #endif /* BCM43xx_H_ */ |