brcmfmac: adopt new d11 interface
[deliverable/linux.git] / drivers / net / wireless / brcm80211 / brcmfmac / sdio_chip.h
CommitLineData
a83369b6
FL
1/*
2 * Copyright (c) 2011 Broadcom Corporation
3 *
4 * Permission to use, copy, modify, and/or distribute this software for any
5 * purpose with or without fee is hereby granted, provided that the above
6 * copyright notice and this permission notice appear in all copies.
7 *
8 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
9 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
10 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
11 * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
12 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
13 * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
14 * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
15 */
16
17#ifndef _BRCMFMAC_SDIO_CHIP_H_
18#define _BRCMFMAC_SDIO_CHIP_H_
19
20/*
21 * Core reg address translation.
22 * Both macro's returns a 32 bits byte address on the backplane bus.
23 */
24#define CORE_CC_REG(base, field) \
25 (base + offsetof(struct chipcregs, field))
26#define CORE_BUS_REG(base, field) \
27 (base + offsetof(struct sdpcmd_regs, field))
28#define CORE_SB(base, field) \
29 (base + SBCONFIGOFF + offsetof(struct sbconfig, field))
30
e63ac6b8
FL
31/* SDIO function 1 register CHIPCLKCSR */
32/* Force ALP request to backplane */
33#define SBSDIO_FORCE_ALP 0x01
34/* Force HT request to backplane */
35#define SBSDIO_FORCE_HT 0x02
36/* Force ILP request to backplane */
37#define SBSDIO_FORCE_ILP 0x04
38/* Make ALP ready (power up xtal) */
39#define SBSDIO_ALP_AVAIL_REQ 0x08
40/* Make HT ready (power up PLL) */
41#define SBSDIO_HT_AVAIL_REQ 0x10
42/* Squelch clock requests from HW */
43#define SBSDIO_FORCE_HW_CLKREQ_OFF 0x20
44/* Status: ALP is ready */
45#define SBSDIO_ALP_AVAIL 0x40
46/* Status: HT is ready */
47#define SBSDIO_HT_AVAIL 0x80
48#define SBSDIO_AVBITS (SBSDIO_HT_AVAIL | SBSDIO_ALP_AVAIL)
49#define SBSDIO_ALPAV(regval) ((regval) & SBSDIO_AVBITS)
50#define SBSDIO_HTAV(regval) (((regval) & SBSDIO_AVBITS) == SBSDIO_AVBITS)
51#define SBSDIO_ALPONLY(regval) (SBSDIO_ALPAV(regval) && !SBSDIO_HTAV(regval))
52#define SBSDIO_CLKAV(regval, alponly) \
53 (SBSDIO_ALPAV(regval) && (alponly ? 1 : SBSDIO_HTAV(regval)))
2d4a9af1 54
99ba15cd
FL
55#define BRCMF_MAX_CORENUM 6
56
57struct chip_core_info {
58 u16 id;
59 u16 rev;
60 u32 base;
61 u32 wrapbase;
62 u32 caps;
523894f2 63 u32 cib;
99ba15cd
FL
64};
65
a83369b6
FL
66struct chip_info {
67 u32 chip;
68 u32 chiprev;
6ca687d9 69 u32 socitype;
99ba15cd
FL
70 /* core info */
71 /* always put chipcommon core at 0, bus core at 1 */
72 struct chip_core_info c_inf[BRCMF_MAX_CORENUM];
a83369b6 73 u32 pmurev;
5b45e54e 74 u32 pmucaps;
a83369b6 75 u32 ramsize;
6ca687d9
FL
76
77 bool (*iscoreup)(struct brcmf_sdio_dev *sdiodev, struct chip_info *ci,
78 u16 coreid);
523894f2
FL
79 u32 (*corerev)(struct brcmf_sdio_dev *sdiodev, struct chip_info *ci,
80 u16 coreid);
086a2e0a
FL
81 void (*coredisable)(struct brcmf_sdio_dev *sdiodev,
82 struct chip_info *ci, u16 coreid);
d77e70ff
FL
83 void (*resetcore)(struct brcmf_sdio_dev *sdiodev,
84 struct chip_info *ci, u16 coreid);
a83369b6
FL
85};
86
87struct sbconfig {
88 u32 PAD[2];
89 u32 sbipsflag; /* initiator port ocp slave flag */
90 u32 PAD[3];
91 u32 sbtpsflag; /* target port ocp slave flag */
92 u32 PAD[11];
93 u32 sbtmerrloga; /* (sonics >= 2.3) */
94 u32 PAD;
95 u32 sbtmerrlog; /* (sonics >= 2.3) */
96 u32 PAD[3];
97 u32 sbadmatch3; /* address match3 */
98 u32 PAD;
99 u32 sbadmatch2; /* address match2 */
100 u32 PAD;
101 u32 sbadmatch1; /* address match1 */
102 u32 PAD[7];
103 u32 sbimstate; /* initiator agent state */
104 u32 sbintvec; /* interrupt mask */
105 u32 sbtmstatelow; /* target state */
106 u32 sbtmstatehigh; /* target state */
107 u32 sbbwa0; /* bandwidth allocation table0 */
108 u32 PAD;
109 u32 sbimconfiglow; /* initiator configuration */
110 u32 sbimconfighigh; /* initiator configuration */
111 u32 sbadmatch0; /* address match0 */
112 u32 PAD;
113 u32 sbtmconfiglow; /* target configuration */
114 u32 sbtmconfighigh; /* target configuration */
115 u32 sbbconfig; /* broadcast configuration */
116 u32 PAD;
117 u32 sbbstate; /* broadcast state */
118 u32 PAD[3];
119 u32 sbactcnfg; /* activate configuration */
120 u32 PAD[3];
121 u32 sbflagst; /* current sbflags */
122 u32 PAD[3];
123 u32 sbidlow; /* identification */
124 u32 sbidhigh; /* identification */
125};
126
069eddd9
FL
127/* sdio core registers */
128struct sdpcmd_regs {
129 u32 corecontrol; /* 0x00, rev8 */
130 u32 corestatus; /* rev8 */
131 u32 PAD[1];
132 u32 biststatus; /* rev8 */
133
134 /* PCMCIA access */
135 u16 pcmciamesportaladdr; /* 0x010, rev8 */
136 u16 PAD[1];
137 u16 pcmciamesportalmask; /* rev8 */
138 u16 PAD[1];
139 u16 pcmciawrframebc; /* rev8 */
140 u16 PAD[1];
141 u16 pcmciaunderflowtimer; /* rev8 */
142 u16 PAD[1];
143
144 /* interrupt */
145 u32 intstatus; /* 0x020, rev8 */
146 u32 hostintmask; /* rev8 */
147 u32 intmask; /* rev8 */
148 u32 sbintstatus; /* rev8 */
149 u32 sbintmask; /* rev8 */
150 u32 funcintmask; /* rev4 */
151 u32 PAD[2];
152 u32 tosbmailbox; /* 0x040, rev8 */
153 u32 tohostmailbox; /* rev8 */
154 u32 tosbmailboxdata; /* rev8 */
155 u32 tohostmailboxdata; /* rev8 */
156
157 /* synchronized access to registers in SDIO clock domain */
158 u32 sdioaccess; /* 0x050, rev8 */
159 u32 PAD[3];
160
161 /* PCMCIA frame control */
162 u8 pcmciaframectrl; /* 0x060, rev8 */
163 u8 PAD[3];
164 u8 pcmciawatermark; /* rev8 */
165 u8 PAD[155];
166
167 /* interrupt batching control */
168 u32 intrcvlazy; /* 0x100, rev8 */
169 u32 PAD[3];
170
171 /* counters */
172 u32 cmd52rd; /* 0x110, rev8 */
173 u32 cmd52wr; /* rev8 */
174 u32 cmd53rd; /* rev8 */
175 u32 cmd53wr; /* rev8 */
176 u32 abort; /* rev8 */
177 u32 datacrcerror; /* rev8 */
178 u32 rdoutofsync; /* rev8 */
179 u32 wroutofsync; /* rev8 */
180 u32 writebusy; /* rev8 */
181 u32 readwait; /* rev8 */
182 u32 readterm; /* rev8 */
183 u32 writeterm; /* rev8 */
184 u32 PAD[40];
185 u32 clockctlstatus; /* rev8 */
186 u32 PAD[7];
187
188 u32 PAD[128]; /* DMA engines */
189
190 /* SDIO/PCMCIA CIS region */
191 char cis[512]; /* 0x400-0x5ff, rev6 */
192
193 /* PCMCIA function control registers */
194 char pcmciafcr[256]; /* 0x600-6ff, rev6 */
195 u16 PAD[55];
196
197 /* PCMCIA backplane access */
198 u16 backplanecsr; /* 0x76E, rev6 */
199 u16 backplaneaddr0; /* rev6 */
200 u16 backplaneaddr1; /* rev6 */
201 u16 backplaneaddr2; /* rev6 */
202 u16 backplaneaddr3; /* rev6 */
203 u16 backplanedata0; /* rev6 */
204 u16 backplanedata1; /* rev6 */
205 u16 backplanedata2; /* rev6 */
206 u16 backplanedata3; /* rev6 */
207 u16 PAD[31];
208
209 /* sprom "size" & "blank" info */
210 u16 spromstatus; /* 0x7BE, rev2 */
211 u32 PAD[464];
212
213 u16 PAD[0x80];
214};
215
a83369b6 216extern int brcmf_sdio_chip_attach(struct brcmf_sdio_dev *sdiodev,
a97e4fc5 217 struct chip_info **ci_ptr, u32 regs);
a8a6c045 218extern void brcmf_sdio_chip_detach(struct chip_info **ci_ptr);
e12afb6c
FL
219extern void brcmf_sdio_chip_drivestrengthinit(struct brcmf_sdio_dev *sdiodev,
220 struct chip_info *ci,
221 u32 drivestrength);
99ba15cd 222extern u8 brcmf_sdio_chip_getinfidx(struct chip_info *ci, u16 coreid);
069eddd9
FL
223extern void brcmf_sdio_chip_enter_download(struct brcmf_sdio_dev *sdiodev,
224 struct chip_info *ci);
225extern bool brcmf_sdio_chip_exit_download(struct brcmf_sdio_dev *sdiodev,
226 struct chip_info *ci, char *nvram_dat,
227 uint nvram_sz);
a83369b6
FL
228
229#endif /* _BRCMFMAC_SDIO_CHIP_H_ */
This page took 0.137996 seconds and 5 git commands to generate.