projects / deliverable / linux.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
brcmfmac: remove brcmf_find_bssidx() function
[deliverable/linux.git] / drivers / net / wireless / brcm80211 / brcmsmac / d11.h
CommitLineData
5b435de0
AS		 1/*
2 * Copyright (c) 2010 Broadcom Corporation
3 *
4 * Permission to use, copy, modify, and/or distribute this software for any
5 * purpose with or without fee is hereby granted, provided that the above
6 * copyright notice and this permission notice appear in all copies.
7 *
8 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
9 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
10 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
11 * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
12 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
13 * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
14 * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
15 */
16
17#ifndef _BRCM_D11_H_
18#define _BRCM_D11_H_
19
20#include <linux/ieee80211.h>
21
22#include <defs.h>
23#include "pub.h"
24#include "dma.h"
25
26/* RX FIFO numbers */
27#define RX_FIFO 0 /* data and ctl frames */
28#define RX_TXSTATUS_FIFO 3 /* RX fifo for tx status packages */
29
30/* TX FIFO numbers using WME Access Category */
31#define TX_AC_BK_FIFO 0 /* Background TX FIFO */
32#define TX_AC_BE_FIFO 1 /* Best-Effort TX FIFO */
33#define TX_AC_VI_FIFO 2 /* Video TX FIFO */
34#define TX_AC_VO_FIFO 3 /* Voice TX FIFO */
35#define TX_BCMC_FIFO 4 /* Broadcast/Multicast TX FIFO */
36#define TX_ATIM_FIFO 5 /* TX fifo for ATIM window info */
37
38/* Addr is byte address used by SW; offset is word offset used by uCode */
39
40/* Per AC TX limit settings */
41#define M_AC_TXLMT_BASE_ADDR (0x180 * 2)
42#define M_AC_TXLMT_ADDR(_ac) (M_AC_TXLMT_BASE_ADDR + (2 * (_ac)))
43
44/* Legacy TX FIFO numbers */
45#define TX_DATA_FIFO TX_AC_BE_FIFO
46#define TX_CTL_FIFO TX_AC_VO_FIFO
47
48#define WL_RSSI_ANT_MAX 4 /* max possible rx antennas */
49
50struct intctrlregs {
51 u32 intstatus;
52 u32 intmask;
53};
54
55/* PIO structure,
56 * support two PIO format: 2 bytes access and 4 bytes access
57 * basic FIFO register set is per channel(transmit or receive)
58 * a pair of channels is defined for convenience
59 */
60/* 2byte-wide pio register set per channel(xmt or rcv) */
61struct pio2regs {
62 u16 fifocontrol;
63 u16 fifodata;
64 u16 fifofree; /* only valid in xmt channel, not in rcv channel */
65 u16 PAD;
66};
67
68/* a pair of pio channels(tx and rx) */
69struct pio2regp {
70 struct pio2regs tx;
71 struct pio2regs rx;
72};
73
74/* 4byte-wide pio register set per channel(xmt or rcv) */
75struct pio4regs {
76 u32 fifocontrol;
77 u32 fifodata;
78};
79
80/* a pair of pio channels(tx and rx) */
81struct pio4regp {
82 struct pio4regs tx;
83 struct pio4regs rx;
84};
85
86/* read: 32-bit register that can be read as 32-bit or as 2 16-bit
87 * write: only low 16b-it half can be written
88 */
89union pmqreg {
90 u32 pmqhostdata; /* read only! */
91 struct {
92 u16 pmqctrlstatus; /* read/write */
93 u16 PAD;
94 } w;
95};
96
97struct fifo64 {
98 struct dma64regs dmaxmt; /* dma tx */
99 struct pio4regs piotx; /* pio tx */
100 struct dma64regs dmarcv; /* dma rx */
101 struct pio4regs piorx; /* pio rx */
102};
103
104/*
105 * Host Interface Registers
106 */
107struct d11regs {
108 /* Device Control ("semi-standard host registers") */
109 u32 PAD[3]; /* 0x0 - 0x8 */
110 u32 biststatus; /* 0xC */
111 u32 biststatus2; /* 0x10 */
112 u32 PAD; /* 0x14 */
113 u32 gptimer; /* 0x18 */
114 u32 usectimer; /* 0x1c *//* for corerev >= 26 */
115
116 /* Interrupt Control *//* 0x20 */
117 struct intctrlregs intctrlregs[8];
118
119 u32 PAD[40]; /* 0x60 - 0xFC */
120
121 u32 intrcvlazy[4]; /* 0x100 - 0x10C */
122
123 u32 PAD[4]; /* 0x110 - 0x11c */
124
125 u32 maccontrol; /* 0x120 */
126 u32 maccommand; /* 0x124 */
127 u32 macintstatus; /* 0x128 */
128 u32 macintmask; /* 0x12C */
129
130 /* Transmit Template Access */
131 u32 tplatewrptr; /* 0x130 */
132 u32 tplatewrdata; /* 0x134 */
133 u32 PAD[2]; /* 0x138 - 0x13C */
134
135 /* PMQ registers */
136 union pmqreg pmqreg; /* 0x140 */
137 u32 pmqpatl; /* 0x144 */
138 u32 pmqpath; /* 0x148 */
139 u32 PAD; /* 0x14C */
140
141 u32 chnstatus; /* 0x150 */
142 u32 psmdebug; /* 0x154 */
143 u32 phydebug; /* 0x158 */
144 u32 machwcap; /* 0x15C */
145
146 /* Extended Internal Objects */
147 u32 objaddr; /* 0x160 */
148 u32 objdata; /* 0x164 */
149 u32 PAD[2]; /* 0x168 - 0x16c */
150
151 u32 frmtxstatus; /* 0x170 */
152 u32 frmtxstatus2; /* 0x174 */
153 u32 PAD[2]; /* 0x178 - 0x17c */
154
155 /* TSF host access */
156 u32 tsf_timerlow; /* 0x180 */
157 u32 tsf_timerhigh; /* 0x184 */
158 u32 tsf_cfprep; /* 0x188 */
159 u32 tsf_cfpstart; /* 0x18c */
160 u32 tsf_cfpmaxdur32; /* 0x190 */
161 u32 PAD[3]; /* 0x194 - 0x19c */
162
163 u32 maccontrol1; /* 0x1a0 */
164 u32 machwcap1; /* 0x1a4 */
165 u32 PAD[14]; /* 0x1a8 - 0x1dc */
166
167 /* Clock control and hardware workarounds*/
168 u32 clk_ctl_st; /* 0x1e0 */
169 u32 hw_war;
170 u32 d11_phypllctl; /* the phypll request/avail bits are
171 * moved to clk_ctl_st
172 */
173 u32 PAD[5]; /* 0x1ec - 0x1fc */
174
175 /* 0x200-0x37F dma/pio registers */
176 struct fifo64 fifo64regs[6];
177
178 /* FIFO diagnostic port access */
179 struct dma32diag dmafifo; /* 0x380 - 0x38C */
180
181 u32 aggfifocnt; /* 0x390 */
182 u32 aggfifodata; /* 0x394 */
183 u32 PAD[16]; /* 0x398 - 0x3d4 */
184 u16 radioregaddr; /* 0x3d8 */
185 u16 radioregdata; /* 0x3da */
186
187 /*
188 * time delay between the change on rf disable input and
189 * radio shutdown
190 */
191 u32 rfdisabledly; /* 0x3DC */
192
193 /* PHY register access */
194 u16 phyversion; /* 0x3e0 - 0x0 */
195 u16 phybbconfig; /* 0x3e2 - 0x1 */
196 u16 phyadcbias; /* 0x3e4 - 0x2 Bphy only */
197 u16 phyanacore; /* 0x3e6 - 0x3 pwwrdwn on aphy */
198 u16 phyrxstatus0; /* 0x3e8 - 0x4 */
199 u16 phyrxstatus1; /* 0x3ea - 0x5 */
200 u16 phycrsth; /* 0x3ec - 0x6 */
201 u16 phytxerror; /* 0x3ee - 0x7 */
202 u16 phychannel; /* 0x3f0 - 0x8 */
203 u16 PAD[1]; /* 0x3f2 - 0x9 */
204 u16 phytest; /* 0x3f4 - 0xa */
205 u16 phy4waddr; /* 0x3f6 - 0xb */
206 u16 phy4wdatahi; /* 0x3f8 - 0xc */
207 u16 phy4wdatalo; /* 0x3fa - 0xd */
208 u16 phyregaddr; /* 0x3fc - 0xe */
209 u16 phyregdata; /* 0x3fe - 0xf */
210
211 /* IHR *//* 0x400 - 0x7FE */
212
213 /* RXE Block */
214 u16 PAD[3]; /* 0x400 - 0x406 */
215 u16 rcv_fifo_ctl; /* 0x406 */
216 u16 PAD; /* 0x408 - 0x40a */
217 u16 rcv_frm_cnt; /* 0x40a */
218 u16 PAD[4]; /* 0x40a - 0x414 */
219 u16 rssi; /* 0x414 */
220 u16 PAD[5]; /* 0x414 - 0x420 */
221 u16 rcm_ctl; /* 0x420 */
222 u16 rcm_mat_data; /* 0x422 */
223 u16 rcm_mat_mask; /* 0x424 */
224 u16 rcm_mat_dly; /* 0x426 */
225 u16 rcm_cond_mask_l; /* 0x428 */
226 u16 rcm_cond_mask_h; /* 0x42A */
227 u16 rcm_cond_dly; /* 0x42C */
228 u16 PAD[1]; /* 0x42E */
229 u16 ext_ihr_addr; /* 0x430 */
230 u16 ext_ihr_data; /* 0x432 */
231 u16 rxe_phyrs_2; /* 0x434 */
232 u16 rxe_phyrs_3; /* 0x436 */
233 u16 phy_mode; /* 0x438 */
234 u16 rcmta_ctl; /* 0x43a */
235 u16 rcmta_size; /* 0x43c */
236 u16 rcmta_addr0; /* 0x43e */
237 u16 rcmta_addr1; /* 0x440 */
238 u16 rcmta_addr2; /* 0x442 */
239 u16 PAD[30]; /* 0x444 - 0x480 */
240
241 /* PSM Block *//* 0x480 - 0x500 */
242
243 u16 PAD; /* 0x480 */
244 u16 psm_maccontrol_h; /* 0x482 */
245 u16 psm_macintstatus_l; /* 0x484 */
246 u16 psm_macintstatus_h; /* 0x486 */
247 u16 psm_macintmask_l; /* 0x488 */
248 u16 psm_macintmask_h; /* 0x48A */
249 u16 PAD; /* 0x48C */
250 u16 psm_maccommand; /* 0x48E */
251 u16 psm_brc; /* 0x490 */
252 u16 psm_phy_hdr_param; /* 0x492 */
253 u16 psm_postcard; /* 0x494 */
254 u16 psm_pcard_loc_l; /* 0x496 */
255 u16 psm_pcard_loc_h; /* 0x498 */
256 u16 psm_gpio_in; /* 0x49A */
257 u16 psm_gpio_out; /* 0x49C */
258 u16 psm_gpio_oe; /* 0x49E */
259
260 u16 psm_bred_0; /* 0x4A0 */
261 u16 psm_bred_1; /* 0x4A2 */
262 u16 psm_bred_2; /* 0x4A4 */
263 u16 psm_bred_3; /* 0x4A6 */
264 u16 psm_brcl_0; /* 0x4A8 */
265 u16 psm_brcl_1; /* 0x4AA */
266 u16 psm_brcl_2; /* 0x4AC */
267 u16 psm_brcl_3; /* 0x4AE */
268 u16 psm_brpo_0; /* 0x4B0 */
269 u16 psm_brpo_1; /* 0x4B2 */
270 u16 psm_brpo_2; /* 0x4B4 */
271 u16 psm_brpo_3; /* 0x4B6 */
272 u16 psm_brwk_0; /* 0x4B8 */
273 u16 psm_brwk_1; /* 0x4BA */
274 u16 psm_brwk_2; /* 0x4BC */
275 u16 psm_brwk_3; /* 0x4BE */
276
277 u16 psm_base_0; /* 0x4C0 */
278 u16 psm_base_1; /* 0x4C2 */
279 u16 psm_base_2; /* 0x4C4 */
280 u16 psm_base_3; /* 0x4C6 */
281 u16 psm_base_4; /* 0x4C8 */
282 u16 psm_base_5; /* 0x4CA */
283 u16 psm_base_6; /* 0x4CC */
284 u16 psm_pc_reg_0; /* 0x4CE */
285 u16 psm_pc_reg_1; /* 0x4D0 */
286 u16 psm_pc_reg_2; /* 0x4D2 */
287 u16 psm_pc_reg_3; /* 0x4D4 */
288 u16 PAD[0xD]; /* 0x4D6 - 0x4DE */
289 u16 psm_corectlsts; /* 0x4f0 *//* Corerev >= 13 */
290 u16 PAD[0x7]; /* 0x4f2 - 0x4fE */
291
292 /* TXE0 Block *//* 0x500 - 0x580 */
293 u16 txe_ctl; /* 0x500 */
294 u16 txe_aux; /* 0x502 */
295 u16 txe_ts_loc; /* 0x504 */
296 u16 txe_time_out; /* 0x506 */
297 u16 txe_wm_0; /* 0x508 */
298 u16 txe_wm_1; /* 0x50A */
299 u16 txe_phyctl; /* 0x50C */
300 u16 txe_status; /* 0x50E */
301 u16 txe_mmplcp0; /* 0x510 */
302 u16 txe_mmplcp1; /* 0x512 */
303 u16 txe_phyctl1; /* 0x514 */
304
305 u16 PAD[0x05]; /* 0x510 - 0x51E */
306
307 /* Transmit control */
308 u16 xmtfifodef; /* 0x520 */
309 u16 xmtfifo_frame_cnt; /* 0x522 *//* Corerev >= 16 */
310 u16 xmtfifo_byte_cnt; /* 0x524 *//* Corerev >= 16 */
311 u16 xmtfifo_head; /* 0x526 *//* Corerev >= 16 */
312 u16 xmtfifo_rd_ptr; /* 0x528 *//* Corerev >= 16 */
313 u16 xmtfifo_wr_ptr; /* 0x52A *//* Corerev >= 16 */
314 u16 xmtfifodef1; /* 0x52C *//* Corerev >= 16 */
315
316 u16 PAD[0x09]; /* 0x52E - 0x53E */
317
318 u16 xmtfifocmd; /* 0x540 */
319 u16 xmtfifoflush; /* 0x542 */
320 u16 xmtfifothresh; /* 0x544 */
321 u16 xmtfifordy; /* 0x546 */
322 u16 xmtfifoprirdy; /* 0x548 */
323 u16 xmtfiforqpri; /* 0x54A */
324 u16 xmttplatetxptr; /* 0x54C */
325 u16 PAD; /* 0x54E */
326 u16 xmttplateptr; /* 0x550 */
327 u16 smpl_clct_strptr; /* 0x552 *//* Corerev >= 22 */
328 u16 smpl_clct_stpptr; /* 0x554 *//* Corerev >= 22 */
329 u16 smpl_clct_curptr; /* 0x556 *//* Corerev >= 22 */
330 u16 PAD[0x04]; /* 0x558 - 0x55E */
331 u16 xmttplatedatalo; /* 0x560 */
332 u16 xmttplatedatahi; /* 0x562 */
333
334 u16 PAD[2]; /* 0x564 - 0x566 */
335
336 u16 xmtsel; /* 0x568 */
337 u16 xmttxcnt; /* 0x56A */
338 u16 xmttxshmaddr; /* 0x56C */
339
340 u16 PAD[0x09]; /* 0x56E - 0x57E */
341
342 /* TXE1 Block */
343 u16 PAD[0x40]; /* 0x580 - 0x5FE */
344
345 /* TSF Block */
346 u16 PAD[0X02]; /* 0x600 - 0x602 */
347 u16 tsf_cfpstrt_l; /* 0x604 */
348 u16 tsf_cfpstrt_h; /* 0x606 */
349 u16 PAD[0X05]; /* 0x608 - 0x610 */
350 u16 tsf_cfppretbtt; /* 0x612 */
351 u16 PAD[0XD]; /* 0x614 - 0x62C */
352 u16 tsf_clk_frac_l; /* 0x62E */
353 u16 tsf_clk_frac_h; /* 0x630 */
354 u16 PAD[0X14]; /* 0x632 - 0x658 */
355 u16 tsf_random; /* 0x65A */
356 u16 PAD[0x05]; /* 0x65C - 0x664 */
357 /* GPTimer 2 registers */
358 u16 tsf_gpt2_stat; /* 0x666 */
359 u16 tsf_gpt2_ctr_l; /* 0x668 */
360 u16 tsf_gpt2_ctr_h; /* 0x66A */
361 u16 tsf_gpt2_val_l; /* 0x66C */
362 u16 tsf_gpt2_val_h; /* 0x66E */
363 u16 tsf_gptall_stat; /* 0x670 */
364 u16 PAD[0x07]; /* 0x672 - 0x67E */
365
366 /* IFS Block */
367 u16 ifs_sifs_rx_tx_tx; /* 0x680 */
368 u16 ifs_sifs_nav_tx; /* 0x682 */
369 u16 ifs_slot; /* 0x684 */
370 u16 PAD; /* 0x686 */
371 u16 ifs_ctl; /* 0x688 */
372 u16 PAD[0x3]; /* 0x68a - 0x68F */
373 u16 ifsstat; /* 0x690 */
374 u16 ifsmedbusyctl; /* 0x692 */
375 u16 iftxdur; /* 0x694 */
376 u16 PAD[0x3]; /* 0x696 - 0x69b */
377 /* EDCF support in dot11macs */
378 u16 ifs_aifsn; /* 0x69c */
379 u16 ifs_ctl1; /* 0x69e */
380
381 /* slow clock registers */
382 u16 scc_ctl; /* 0x6a0 */
383 u16 scc_timer_l; /* 0x6a2 */
384 u16 scc_timer_h; /* 0x6a4 */
385 u16 scc_frac; /* 0x6a6 */
386 u16 scc_fastpwrup_dly; /* 0x6a8 */
387 u16 scc_per; /* 0x6aa */
388 u16 scc_per_frac; /* 0x6ac */
389 u16 scc_cal_timer_l; /* 0x6ae */
390 u16 scc_cal_timer_h; /* 0x6b0 */
391 u16 PAD; /* 0x6b2 */
392
393 u16 PAD[0x26];
394
395 /* NAV Block */
396 u16 nav_ctl; /* 0x700 */
397 u16 navstat; /* 0x702 */
398 u16 PAD[0x3e]; /* 0x702 - 0x77E */
399
400 /* WEP/PMQ Block *//* 0x780 - 0x7FE */
401 u16 PAD[0x20]; /* 0x780 - 0x7BE */
402
403 u16 wepctl; /* 0x7C0 */
404 u16 wepivloc; /* 0x7C2 */
405 u16 wepivkey; /* 0x7C4 */
406 u16 wepwkey; /* 0x7C6 */
407
408 u16 PAD[4]; /* 0x7C8 - 0x7CE */
409 u16 pcmctl; /* 0X7D0 */
410 u16 pcmstat; /* 0X7D2 */
411 u16 PAD[6]; /* 0x7D4 - 0x7DE */
412
413 u16 pmqctl; /* 0x7E0 */
414 u16 pmqstatus; /* 0x7E2 */
415 u16 pmqpat0; /* 0x7E4 */
416 u16 pmqpat1; /* 0x7E6 */
417 u16 pmqpat2; /* 0x7E8 */
418
419 u16 pmqdat; /* 0x7EA */
420 u16 pmqdator; /* 0x7EC */
421 u16 pmqhst; /* 0x7EE */
422 u16 pmqpath0; /* 0x7F0 */
423 u16 pmqpath1; /* 0x7F2 */
424 u16 pmqpath2; /* 0x7F4 */
425 u16 pmqdath; /* 0x7F6 */
426
427 u16 PAD[0x04]; /* 0x7F8 - 0x7FE */
428
429 /* SHM *//* 0x800 - 0xEFE */
430 u16 PAD[0x380]; /* 0x800 - 0xEFE */
431};
432
16d2812e
AS		 433/* d11 register field offset */
434#define D11REGOFFS(field) offsetof(struct d11regs, field)
435
5b435de0
AS		 436#define PIHR_BASE 0x0400 /* byte address of packed IHR region */
437
438/* biststatus */
439#define BT_DONE (1U << 31) /* bist done */
440#define BT_B2S (1 << 30) /* bist2 ram summary bit */
441
442/* intstatus and intmask */
443#define I_PC (1 << 10) /* pci descriptor error */
444#define I_PD (1 << 11) /* pci data error */
445#define I_DE (1 << 12) /* descriptor protocol error */
446#define I_RU (1 << 13) /* receive descriptor underflow */
447#define I_RO (1 << 14) /* receive fifo overflow */
448#define I_XU (1 << 15) /* transmit fifo underflow */
449#define I_RI (1 << 16) /* receive interrupt */
450#define I_XI (1 << 24) /* transmit interrupt */
451
452/* interrupt receive lazy */
453#define IRL_TO_MASK 0x00ffffff /* timeout */
454#define IRL_FC_MASK 0xff000000 /* frame count */
455#define IRL_FC_SHIFT 24 /* frame count */
456
457/*== maccontrol register ==*/
458#define MCTL_GMODE (1U << 31)
459#define MCTL_DISCARD_PMQ (1 << 30)
460#define MCTL_WAKE (1 << 26)
461#define MCTL_HPS (1 << 25)
462#define MCTL_PROMISC (1 << 24)
463#define MCTL_KEEPBADFCS (1 << 23)
464#define MCTL_KEEPCONTROL (1 << 22)
465#define MCTL_PHYLOCK (1 << 21)
466#define MCTL_BCNS_PROMISC (1 << 20)
467#define MCTL_LOCK_RADIO (1 << 19)
468#define MCTL_AP (1 << 18)
469#define MCTL_INFRA (1 << 17)
470#define MCTL_BIGEND (1 << 16)
471#define MCTL_GPOUT_SEL_MASK (3 << 14)
472#define MCTL_GPOUT_SEL_SHIFT 14
473#define MCTL_EN_PSMDBG (1 << 13)
474#define MCTL_IHR_EN (1 << 10)
475#define MCTL_SHM_UPPER (1 << 9)
476#define MCTL_SHM_EN (1 << 8)
477#define MCTL_PSM_JMP_0 (1 << 2)
478#define MCTL_PSM_RUN (1 << 1)
479#define MCTL_EN_MAC (1 << 0)
480
481/*== maccommand register ==*/
482#define MCMD_BCN0VLD (1 << 0)
483#define MCMD_BCN1VLD (1 << 1)
484#define MCMD_DIRFRMQVAL (1 << 2)
485#define MCMD_CCA (1 << 3)
486#define MCMD_BG_NOISE (1 << 4)
487#define MCMD_SKIP_SHMINIT (1 << 5) /* only used for simulation */
488#define MCMD_SAMPLECOLL MCMD_SKIP_SHMINIT /* reuse for sample collect */
489
490/*== macintstatus/macintmask ==*/
491/* gracefully suspended */
492#define MI_MACSSPNDD (1 << 0)
493/* beacon template available */
494#define MI_BCNTPL (1 << 1)
495/* TBTT indication */
496#define MI_TBTT (1 << 2)
497/* beacon successfully tx'd */
498#define MI_BCNSUCCESS (1 << 3)
499/* beacon canceled (IBSS) */
500#define MI_BCNCANCLD (1 << 4)
501/* end of ATIM-window (IBSS) */
502#define MI_ATIMWINEND (1 << 5)
503/* PMQ entries available */
504#define MI_PMQ (1 << 6)
505/* non-specific gen-stat bits that are set by PSM */
506#define MI_NSPECGEN_0 (1 << 7)
507/* non-specific gen-stat bits that are set by PSM */
508#define MI_NSPECGEN_1 (1 << 8)
509/* MAC level Tx error */
510#define MI_MACTXERR (1 << 9)
511/* non-specific gen-stat bits that are set by PSM */
512#define MI_NSPECGEN_3 (1 << 10)
513/* PHY Tx error */
514#define MI_PHYTXERR (1 << 11)
515/* Power Management Event */
516#define MI_PME (1 << 12)
517/* General-purpose timer0 */
518#define MI_GP0 (1 << 13)
519/* General-purpose timer1 */
520#define MI_GP1 (1 << 14)
521/* (ORed) DMA-interrupts */
522#define MI_DMAINT (1 << 15)
523/* MAC has completed a TX FIFO Suspend/Flush */
524#define MI_TXSTOP (1 << 16)
525/* MAC has completed a CCA measurement */
526#define MI_CCA (1 << 17)
527/* MAC has collected background noise samples */
528#define MI_BG_NOISE (1 << 18)
529/* MBSS DTIM TBTT indication */
530#define MI_DTIM_TBTT (1 << 19)
531/* Probe response queue needs attention */
532#define MI_PRQ (1 << 20)
533/* Radio/PHY has been powered back up. */
534#define MI_PWRUP (1 << 21)
535#define MI_RESERVED3 (1 << 22)
536#define MI_RESERVED2 (1 << 23)
537#define MI_RESERVED1 (1 << 25)
538/* MAC detected change on RF Disable input*/
539#define MI_RFDISABLE (1 << 28)
540/* MAC has completed a TX */
541#define MI_TFS (1 << 29)
542/* A phy status change wrt G mode */
543#define MI_PHYCHANGED (1 << 30)
544/* general purpose timeout */
545#define MI_TO (1U << 31)
546
547/* Mac capabilities registers */
548/*== machwcap ==*/
549#define MCAP_TKIPMIC 0x80000000 /* TKIP MIC hardware present */
550
551/*== pmqhost data ==*/
552/* data entry of head pmq entry */
553#define PMQH_DATA_MASK 0xffff0000
554/* PM entry for BSS config */
555#define PMQH_BSSCFG 0x00100000
556/* PM Mode OFF: power save off */
557#define PMQH_PMOFF 0x00010000
558/* PM Mode ON: power save on */
559#define PMQH_PMON 0x00020000
560/* Dis-associated or De-authenticated */
561#define PMQH_DASAT 0x00040000
562/* ATIM not acknowledged */
563#define PMQH_ATIMFAIL 0x00080000
564/* delete head entry */
565#define PMQH_DEL_ENTRY 0x00000001
566/* delete head entry to cur read pointer -1 */
567#define PMQH_DEL_MULT 0x00000002
568/* pmq overflow indication */
569#define PMQH_OFLO 0x00000004
570/* entries are present in pmq */
571#define PMQH_NOT_EMPTY 0x00000008
572
573/*== phydebug ==*/
574/* phy is asserting carrier sense */
575#define PDBG_CRS (1 << 0)
576/* phy is taking xmit byte from mac this cycle */
577#define PDBG_TXA (1 << 1)
578/* mac is instructing the phy to transmit a frame */
579#define PDBG_TXF (1 << 2)
580/* phy is signalling a transmit Error to the mac */
581#define PDBG_TXE (1 << 3)
582/* phy detected the end of a valid frame preamble */
583#define PDBG_RXF (1 << 4)
584/* phy detected the end of a valid PLCP header */
585#define PDBG_RXS (1 << 5)
586/* rx start not asserted */
587#define PDBG_RXFRG (1 << 6)
588/* mac is taking receive byte from phy this cycle */
589#define PDBG_RXV (1 << 7)
590/* RF portion of the radio is disabled */
591#define PDBG_RFD (1 << 16)
592
593/*== objaddr register ==*/
594#define OBJADDR_SEL_MASK 0x000F0000
595#define OBJADDR_UCM_SEL 0x00000000
596#define OBJADDR_SHM_SEL 0x00010000
597#define OBJADDR_SCR_SEL 0x00020000
598#define OBJADDR_IHR_SEL 0x00030000
599#define OBJADDR_RCMTA_SEL 0x00040000
600#define OBJADDR_SRCHM_SEL 0x00060000
601#define OBJADDR_WINC 0x01000000
602#define OBJADDR_RINC 0x02000000
603#define OBJADDR_AUTO_INC 0x03000000
604
605#define WEP_PCMADDR 0x07d4
606#define WEP_PCMDATA 0x07d6
607
608/*== frmtxstatus ==*/
609#define TXS_V (1 << 0) /* valid bit */
610#define TXS_STATUS_MASK 0xffff
611#define TXS_FID_MASK 0xffff0000
612#define TXS_FID_SHIFT 16
613
614/*== frmtxstatus2 ==*/
615#define TXS_SEQ_MASK 0xffff
616#define TXS_PTX_MASK 0xff0000
617#define TXS_PTX_SHIFT 16
618#define TXS_MU_MASK 0x01000000
619#define TXS_MU_SHIFT 24
620
621/*== clk_ctl_st ==*/
622#define CCS_ERSRC_REQ_D11PLL 0x00000100 /* d11 core pll request */
623#define CCS_ERSRC_REQ_PHYPLL 0x00000200 /* PHY pll request */
624#define CCS_ERSRC_AVAIL_D11PLL 0x01000000 /* d11 core pll available */
625#define CCS_ERSRC_AVAIL_PHYPLL 0x02000000 /* PHY pll available */
626
627/* HT Cloclk Ctrl and Clock Avail for 4313 */
628#define CCS_ERSRC_REQ_HT 0x00000010 /* HT avail request */
629#define CCS_ERSRC_AVAIL_HT 0x00020000 /* HT clock available */
630
631/* tsf_cfprep register */
632#define CFPREP_CBI_MASK 0xffffffc0
633#define CFPREP_CBI_SHIFT 6
634#define CFPREP_CFPP 0x00000001
635
636/* tx fifo sizes values are in terms of 256 byte blocks */
637#define TXFIFOCMD_RESET_MASK (1 << 15) /* reset */
638#define TXFIFOCMD_FIFOSEL_SHIFT 8 /* fifo */
639#define TXFIFO_FIFOTOP_SHIFT 8 /* fifo start */
640
641#define TXFIFO_START_BLK16 65 /* Base address + 32 * 512 B/P */
642#define TXFIFO_START_BLK 6 /* Base address + 6 * 256 B */
643#define TXFIFO_SIZE_UNIT 256 /* one unit corresponds to 256 bytes */
644#define MBSS16_TEMPLMEM_MINBLKS 65 /* one unit corresponds to 256 bytes */
645
646/*== phy versions (PhyVersion:Revision field) ==*/
647/* analog block version */
648#define PV_AV_MASK 0xf000
649/* analog block version bitfield offset */
650#define PV_AV_SHIFT 12
651/* phy type */
652#define PV_PT_MASK 0x0f00
653/* phy type bitfield offset */
654#define PV_PT_SHIFT 8
655/* phy version */
656#define PV_PV_MASK 0x000f
657#define PHY_TYPE(v) ((v & PV_PT_MASK) >> PV_PT_SHIFT)
658
659/*== phy types (PhyVersion:PhyType field) ==*/
660#define PHY_TYPE_N 4 /* N-Phy value */
661#define PHY_TYPE_SSN 6 /* SSLPN-Phy value */
662#define PHY_TYPE_LCN 8 /* LCN-Phy value */
663#define PHY_TYPE_LCNXN 9 /* LCNXN-Phy value */
664#define PHY_TYPE_NULL 0xf /* Invalid Phy value */
665
666/*== analog types (PhyVersion:AnalogType field) ==*/
667#define ANA_11N_013 5
668
669/* 802.11a PLCP header def */
670struct ofdm_phy_hdr {
671 u8 rlpt[3]; /* rate, length, parity, tail */
672 u16 service;
673 u8 pad;
674} __packed;
675
676#define D11A_PHY_HDR_GRATE(phdr) ((phdr)->rlpt[0] & 0x0f)
677#define D11A_PHY_HDR_GRES(phdr) (((phdr)->rlpt[0] >> 4) & 0x01)
678#define D11A_PHY_HDR_GLENGTH(phdr) (((u32 *)((phdr)->rlpt) >> 5) & 0x0fff)
679#define D11A_PHY_HDR_GPARITY(phdr) (((phdr)->rlpt[3] >> 1) & 0x01)
680#define D11A_PHY_HDR_GTAIL(phdr) (((phdr)->rlpt[3] >> 2) & 0x3f)
681
682/* rate encoded per 802.11a-1999 sec 17.3.4.1 */
683#define D11A_PHY_HDR_SRATE(phdr, rate) \
684 ((phdr)->rlpt[0] = ((phdr)->rlpt[0] & 0xf0) | ((rate) & 0xf))
685/* set reserved field to zero */
686#define D11A_PHY_HDR_SRES(phdr) ((phdr)->rlpt[0] &= 0xef)
687/* length is number of octets in PSDU */
688#define D11A_PHY_HDR_SLENGTH(phdr, length) \
689 (*(u32 *)((phdr)->rlpt) = *(u32 *)((phdr)->rlpt) | \
690 (((length) & 0x0fff) << 5))
691/* set the tail to all zeros */
692#define D11A_PHY_HDR_STAIL(phdr) ((phdr)->rlpt[3] &= 0x03)
693
694#define D11A_PHY_HDR_LEN_L 3 /* low-rate part of PLCP header */
695#define D11A_PHY_HDR_LEN_R 2 /* high-rate part of PLCP header */
696
697#define D11A_PHY_TX_DELAY (2) /* 2.1 usec */
698
699#define D11A_PHY_HDR_TIME (4) /* low-rate part of PLCP header */
700#define D11A_PHY_PRE_TIME (16)
701#define D11A_PHY_PREHDR_TIME (D11A_PHY_PRE_TIME + D11A_PHY_HDR_TIME)
702
703/* 802.11b PLCP header def */
704struct cck_phy_hdr {
705 u8 signal;
706 u8 service;
707 u16 length;
708 u16 crc;
709} __packed;
710
711#define D11B_PHY_HDR_LEN 6
712
713#define D11B_PHY_TX_DELAY (3) /* 3.4 usec */
714
715#define D11B_PHY_LHDR_TIME (D11B_PHY_HDR_LEN << 3)
716#define D11B_PHY_LPRE_TIME (144)
717#define D11B_PHY_LPREHDR_TIME (D11B_PHY_LPRE_TIME + D11B_PHY_LHDR_TIME)
718
719#define D11B_PHY_SHDR_TIME (D11B_PHY_LHDR_TIME >> 1)
720#define D11B_PHY_SPRE_TIME (D11B_PHY_LPRE_TIME >> 1)
721#define D11B_PHY_SPREHDR_TIME (D11B_PHY_SPRE_TIME + D11B_PHY_SHDR_TIME)
722
723#define D11B_PLCP_SIGNAL_LOCKED (1 << 2)
724#define D11B_PLCP_SIGNAL_LE (1 << 7)
725
726#define MIMO_PLCP_MCS_MASK 0x7f /* mcs index */
727#define MIMO_PLCP_40MHZ 0x80 /* 40 Hz frame */
728#define MIMO_PLCP_AMPDU 0x08 /* ampdu */
729
730#define BRCMS_GET_CCK_PLCP_LEN(plcp) (plcp[4] + (plcp[5] << 8))
731#define BRCMS_GET_MIMO_PLCP_LEN(plcp) (plcp[1] + (plcp[2] << 8))
732#define BRCMS_SET_MIMO_PLCP_LEN(plcp, len) \
733 do { \
734 plcp[1] = len & 0xff; \
735 plcp[2] = ((len >> 8) & 0xff); \
da951c24 736 } while (0)
5b435de0
AS		 737
738#define BRCMS_SET_MIMO_PLCP_AMPDU(plcp) (plcp[3] |= MIMO_PLCP_AMPDU)
739#define BRCMS_CLR_MIMO_PLCP_AMPDU(plcp) (plcp[3] &= ~MIMO_PLCP_AMPDU)
740#define BRCMS_IS_MIMO_PLCP_AMPDU(plcp) (plcp[3] & MIMO_PLCP_AMPDU)
741
742/*
743 * The dot11a PLCP header is 5 bytes. To simplify the software (so that we
744 * don't need e.g. different tx DMA headers for 11a and 11b), the PLCP header
745 * has padding added in the ucode.
746 */
747#define D11_PHY_HDR_LEN 6
748
749/* TX DMA buffer header */
750struct d11txh {
751 __le16 MacTxControlLow; /* 0x0 */
752 __le16 MacTxControlHigh; /* 0x1 */
753 __le16 MacFrameControl; /* 0x2 */
754 __le16 TxFesTimeNormal; /* 0x3 */
755 __le16 PhyTxControlWord; /* 0x4 */
756 __le16 PhyTxControlWord_1; /* 0x5 */
757 __le16 PhyTxControlWord_1_Fbr; /* 0x6 */
758 __le16 PhyTxControlWord_1_Rts; /* 0x7 */
759 __le16 PhyTxControlWord_1_FbrRts; /* 0x8 */
760 __le16 MainRates; /* 0x9 */
761 __le16 XtraFrameTypes; /* 0xa */
762 u8 IV[16]; /* 0x0b - 0x12 */
763 u8 TxFrameRA[6]; /* 0x13 - 0x15 */
764 __le16 TxFesTimeFallback; /* 0x16 */
765 u8 RTSPLCPFallback[6]; /* 0x17 - 0x19 */
766 __le16 RTSDurFallback; /* 0x1a */
767 u8 FragPLCPFallback[6]; /* 0x1b - 1d */
768 __le16 FragDurFallback; /* 0x1e */
769 __le16 MModeLen; /* 0x1f */
770 __le16 MModeFbrLen; /* 0x20 */
771 __le16 TstampLow; /* 0x21 */
772 __le16 TstampHigh; /* 0x22 */
773 __le16 ABI_MimoAntSel; /* 0x23 */
774 __le16 PreloadSize; /* 0x24 */
775 __le16 AmpduSeqCtl; /* 0x25 */
776 __le16 TxFrameID; /* 0x26 */
777 __le16 TxStatus; /* 0x27 */
778 __le16 MaxNMpdus; /* 0x28 */
779 __le16 MaxABytes_MRT; /* 0x29 */
780 __le16 MaxABytes_FBR; /* 0x2a */
781 __le16 MinMBytes; /* 0x2b */
782 u8 RTSPhyHeader[D11_PHY_HDR_LEN]; /* 0x2c - 0x2e */
783 struct ieee80211_rts rts_frame; /* 0x2f - 0x36 */
784 u16 PAD; /* 0x37 */
785} __packed;
786
787#define D11_TXH_LEN 112 /* bytes */
788
789/* Frame Types */
790#define FT_CCK 0
791#define FT_OFDM 1
792#define FT_HT 2
793#define FT_N 3
794
795/*
796 * Position of MPDU inside A-MPDU; indicated with bits 10:9
797 * of MacTxControlLow
798 */
799#define TXC_AMPDU_SHIFT 9 /* shift for ampdu settings */
800#define TXC_AMPDU_NONE 0 /* Regular MPDU, not an A-MPDU */
801#define TXC_AMPDU_FIRST 1 /* first MPDU of an A-MPDU */
802#define TXC_AMPDU_MIDDLE 2 /* intermediate MPDU of an A-MPDU */
803#define TXC_AMPDU_LAST 3 /* last (or single) MPDU of an A-MPDU */
804
805/*== MacTxControlLow ==*/
806#define TXC_AMIC 0x8000
807#define TXC_SENDCTS 0x0800
808#define TXC_AMPDU_MASK 0x0600
809#define TXC_BW_40 0x0100
810#define TXC_FREQBAND_5G 0x0080
811#define TXC_DFCS 0x0040
812#define TXC_IGNOREPMQ 0x0020
813#define TXC_HWSEQ 0x0010
814#define TXC_STARTMSDU 0x0008
815#define TXC_SENDRTS 0x0004
816#define TXC_LONGFRAME 0x0002
817#define TXC_IMMEDACK 0x0001
818
819/*== MacTxControlHigh ==*/
820/* RTS fallback preamble type 1 = SHORT 0 = LONG */
821#define TXC_PREAMBLE_RTS_FB_SHORT 0x8000
822/* RTS main rate preamble type 1 = SHORT 0 = LONG */
823#define TXC_PREAMBLE_RTS_MAIN_SHORT 0x4000
824/*
825 * Main fallback rate preamble type
826 * 1 = SHORT for OFDM/GF for MIMO
827 * 0 = LONG for CCK/MM for MIMO
828 */
829#define TXC_PREAMBLE_DATA_FB_SHORT 0x2000
830
831/* TXC_PREAMBLE_DATA_MAIN is in PhyTxControl bit 5 */
832/* use fallback rate for this AMPDU */
833#define TXC_AMPDU_FBR 0x1000
834#define TXC_SECKEY_MASK 0x0FF0
835#define TXC_SECKEY_SHIFT 4
836/* Use alternate txpwr defined at loc. M_ALT_TXPWR_IDX */
837#define TXC_ALT_TXPWR 0x0008
838#define TXC_SECTYPE_MASK 0x0007
839#define TXC_SECTYPE_SHIFT 0
840
841/* Null delimiter for Fallback rate */
842#define AMPDU_FBR_NULL_DELIM 5 /* Location of Null delimiter count for AMPDU */
843
844/* PhyTxControl for Mimophy */
845#define PHY_TXC_PWR_MASK 0xFC00
846#define PHY_TXC_PWR_SHIFT 10
847#define PHY_TXC_ANT_MASK 0x03C0 /* bit 6, 7, 8, 9 */
848#define PHY_TXC_ANT_SHIFT 6
849#define PHY_TXC_ANT_0_1 0x00C0 /* auto, last rx */
850#define PHY_TXC_LCNPHY_ANT_LAST 0x0000
851#define PHY_TXC_ANT_3 0x0200 /* virtual antenna 3 */
852#define PHY_TXC_ANT_2 0x0100 /* virtual antenna 2 */
853#define PHY_TXC_ANT_1 0x0080 /* virtual antenna 1 */
854#define PHY_TXC_ANT_0 0x0040 /* virtual antenna 0 */
855#define PHY_TXC_SHORT_HDR 0x0010
856
857#define PHY_TXC_OLD_ANT_0 0x0000
858#define PHY_TXC_OLD_ANT_1 0x0100
859#define PHY_TXC_OLD_ANT_LAST 0x0300
860
861/* PhyTxControl_1 for Mimophy */
862#define PHY_TXC1_BW_MASK 0x0007
863#define PHY_TXC1_BW_10MHZ 0
864#define PHY_TXC1_BW_10MHZ_UP 1
865#define PHY_TXC1_BW_20MHZ 2
866#define PHY_TXC1_BW_20MHZ_UP 3
867#define PHY_TXC1_BW_40MHZ 4
868#define PHY_TXC1_BW_40MHZ_DUP 5
869#define PHY_TXC1_MODE_SHIFT 3
870#define PHY_TXC1_MODE_MASK 0x0038
871#define PHY_TXC1_MODE_SISO 0
872#define PHY_TXC1_MODE_CDD 1
873#define PHY_TXC1_MODE_STBC 2
874#define PHY_TXC1_MODE_SDM 3
875
876/* PhyTxControl for HTphy that are different from Mimophy */
877#define PHY_TXC_HTANT_MASK 0x3fC0 /* bits 6-13 */
878
879/* XtraFrameTypes */
880#define XFTS_RTS_FT_SHIFT 2
881#define XFTS_FBRRTS_FT_SHIFT 4
882#define XFTS_CHANNEL_SHIFT 8
883
884/* Antenna diversity bit in ant_wr_settle */
885#define PHY_AWS_ANTDIV 0x2000
886
887/* IFS ctl */
888#define IFS_USEEDCF (1 << 2)
889
890/* IFS ctl1 */
891#define IFS_CTL1_EDCRS (1 << 3)
892#define IFS_CTL1_EDCRS_20L (1 << 4)
893#define IFS_CTL1_EDCRS_40 (1 << 5)
894
895/* ABI_MimoAntSel */
896#define ABI_MAS_ADDR_BMP_IDX_MASK 0x0f00
897#define ABI_MAS_ADDR_BMP_IDX_SHIFT 8
898#define ABI_MAS_FBR_ANT_PTN_MASK 0x00f0
899#define ABI_MAS_FBR_ANT_PTN_SHIFT 4
900#define ABI_MAS_MRT_ANT_PTN_MASK 0x000f
901
902/* tx status packet */
903struct tx_status {
904 u16 framelen;
905 u16 PAD;
906 u16 frameid;
907 u16 status;
908 u16 lasttxtime;
909 u16 sequence;
910 u16 phyerr;
911 u16 ackphyrxsh;
912} __packed;
913
914#define TXSTATUS_LEN 16
915
916/* status field bit definitions */
917#define TX_STATUS_FRM_RTX_MASK 0xF000
918#define TX_STATUS_FRM_RTX_SHIFT 12
919#define TX_STATUS_RTS_RTX_MASK 0x0F00
920#define TX_STATUS_RTS_RTX_SHIFT 8
921#define TX_STATUS_MASK 0x00FE
922#define TX_STATUS_PMINDCTD (1 << 7) /* PM mode indicated to AP */
923#define TX_STATUS_INTERMEDIATE (1 << 6) /* intermediate or 1st ampdu pkg */
924#define TX_STATUS_AMPDU (1 << 5) /* AMPDU status */
925#define TX_STATUS_SUPR_MASK 0x1C /* suppress status bits (4:2) */
926#define TX_STATUS_SUPR_SHIFT 2
927#define TX_STATUS_ACK_RCV (1 << 1) /* ACK received */
928#define TX_STATUS_VALID (1 << 0) /* Tx status valid */
929#define TX_STATUS_NO_ACK 0
930
931/* suppress status reason codes */
932#define TX_STATUS_SUPR_PMQ (1 << 2) /* PMQ entry */
933#define TX_STATUS_SUPR_FLUSH (2 << 2) /* flush request */
934#define TX_STATUS_SUPR_FRAG (3 << 2) /* previous frag failure */
935#define TX_STATUS_SUPR_TBTT (3 << 2) /* SHARED: Probe resp supr for TBTT */
936#define TX_STATUS_SUPR_BADCH (4 << 2) /* channel mismatch */
937#define TX_STATUS_SUPR_EXPTIME (5 << 2) /* lifetime expiry */
938#define TX_STATUS_SUPR_UF (6 << 2) /* underflow */
939
940/* Unexpected tx status for rate update */
941#define TX_STATUS_UNEXP(status) \
942 ((((status) & TX_STATUS_INTERMEDIATE) != 0) && \
943 TX_STATUS_UNEXP_AMPDU(status))
944
945/* Unexpected tx status for A-MPDU rate update */
946#define TX_STATUS_UNEXP_AMPDU(status) \
947 ((((status) & TX_STATUS_SUPR_MASK) != 0) && \
948 (((status) & TX_STATUS_SUPR_MASK) != TX_STATUS_SUPR_EXPTIME))
949
950#define TX_STATUS_BA_BMAP03_MASK 0xF000 /* ba bitmap 0:3 in 1st pkg */
951#define TX_STATUS_BA_BMAP03_SHIFT 12 /* ba bitmap 0:3 in 1st pkg */
952#define TX_STATUS_BA_BMAP47_MASK 0x001E /* ba bitmap 4:7 in 2nd pkg */
953#define TX_STATUS_BA_BMAP47_SHIFT 3 /* ba bitmap 4:7 in 2nd pkg */
954
955/* RXE (Receive Engine) */
956
957/* RCM_CTL */
958#define RCM_INC_MASK_H 0x0080
959#define RCM_INC_MASK_L 0x0040
960#define RCM_INC_DATA 0x0020
961#define RCM_INDEX_MASK 0x001F
962#define RCM_SIZE 15
963
964#define RCM_MAC_OFFSET 0 /* current MAC address */
965#define RCM_BSSID_OFFSET 3 /* current BSSID address */
966#define RCM_F_BSSID_0_OFFSET 6 /* foreign BSS CFP tracking */
967#define RCM_F_BSSID_1_OFFSET 9 /* foreign BSS CFP tracking */
968#define RCM_F_BSSID_2_OFFSET 12 /* foreign BSS CFP tracking */
969
970#define RCM_WEP_TA0_OFFSET 16
971#define RCM_WEP_TA1_OFFSET 19
972#define RCM_WEP_TA2_OFFSET 22
973#define RCM_WEP_TA3_OFFSET 25
974
975/* PSM Block */
976
977/* psm_phy_hdr_param bits */
978#define MAC_PHY_RESET 1
979#define MAC_PHY_CLOCK_EN 2
980#define MAC_PHY_FORCE_CLK 4
981
982/* WEP Block */
983
984/* WEP_WKEY */
985#define WKEY_START (1 << 8)
986#define WKEY_SEL_MASK 0x1F
987
988/* WEP data formats */
989
990/* the number of RCMTA entries */
991#define RCMTA_SIZE 50
992
993#define M_ADDR_BMP_BLK (0x37e * 2)
994#define M_ADDR_BMP_BLK_SZ 12
995
996#define ADDR_BMP_RA (1 << 0) /* Receiver Address (RA) */
997#define ADDR_BMP_TA (1 << 1) /* Transmitter Address (TA) */
998#define ADDR_BMP_BSSID (1 << 2) /* BSSID */
999#define ADDR_BMP_AP (1 << 3) /* Infra-BSS Access Point */
1000#define ADDR_BMP_STA (1 << 4) /* Infra-BSS Station */
1001#define ADDR_BMP_RESERVED1 (1 << 5)
1002#define ADDR_BMP_RESERVED2 (1 << 6)
1003#define ADDR_BMP_RESERVED3 (1 << 7)
1004#define ADDR_BMP_BSS_IDX_MASK (3 << 8) /* BSS control block index */
1005#define ADDR_BMP_BSS_IDX_SHIFT 8
1006
1007#define WSEC_MAX_RCMTA_KEYS 54
1008
1009/* max keys in M_TKMICKEYS_BLK */
1010#define WSEC_MAX_TKMIC_ENGINE_KEYS 12 /* 8 + 4 default */
1011
1012/* max RXE match registers */
1013#define WSEC_MAX_RXE_KEYS 4
1014
1015/* SECKINDXALGO (Security Key Index & Algorithm Block) word format */
1016/* SKL (Security Key Lookup) */
1017#define SKL_ALGO_MASK 0x0007
1018#define SKL_ALGO_SHIFT 0
1019#define SKL_KEYID_MASK 0x0008
1020#define SKL_KEYID_SHIFT 3
1021#define SKL_INDEX_MASK 0x03F0
1022#define SKL_INDEX_SHIFT 4
1023#define SKL_GRP_ALGO_MASK 0x1c00
1024#define SKL_GRP_ALGO_SHIFT 10
1025
1026/* additional bits defined for IBSS group key support */
1027#define SKL_IBSS_INDEX_MASK 0x01F0
1028#define SKL_IBSS_INDEX_SHIFT 4
1029#define SKL_IBSS_KEYID1_MASK 0x0600
1030#define SKL_IBSS_KEYID1_SHIFT 9
1031#define SKL_IBSS_KEYID2_MASK 0x1800
1032#define SKL_IBSS_KEYID2_SHIFT 11
1033#define SKL_IBSS_KEYALGO_MASK 0xE000
1034#define SKL_IBSS_KEYALGO_SHIFT 13
1035
1036#define WSEC_MODE_OFF 0
1037#define WSEC_MODE_HW 1
1038#define WSEC_MODE_SW 2
1039
1040#define WSEC_ALGO_OFF 0
1041#define WSEC_ALGO_WEP1 1
1042#define WSEC_ALGO_TKIP 2
1043#define WSEC_ALGO_AES 3
1044#define WSEC_ALGO_WEP128 4
1045#define WSEC_ALGO_AES_LEGACY 5
1046#define WSEC_ALGO_NALG 6
1047
1048#define AES_MODE_NONE 0
1049#define AES_MODE_CCM 1
1050
1051/* WEP_CTL (Rev 0) */
1052#define WECR0_KEYREG_SHIFT 0
1053#define WECR0_KEYREG_MASK 0x7
1054#define WECR0_DECRYPT (1 << 3)
1055#define WECR0_IVINLINE (1 << 4)
1056#define WECR0_WEPALG_SHIFT 5
1057#define WECR0_WEPALG_MASK (0x7 << 5)
1058#define WECR0_WKEYSEL_SHIFT 8
1059#define WECR0_WKEYSEL_MASK (0x7 << 8)
1060#define WECR0_WKEYSTART (1 << 11)
1061#define WECR0_WEPINIT (1 << 14)
1062#define WECR0_ICVERR (1 << 15)
1063
1064/* Frame template map byte offsets */
1065#define T_ACTS_TPL_BASE (0)
1066#define T_NULL_TPL_BASE (0xc * 2)
1067#define T_QNULL_TPL_BASE (0x1c * 2)
1068#define T_RR_TPL_BASE (0x2c * 2)
1069#define T_BCN0_TPL_BASE (0x34 * 2)
1070#define T_PRS_TPL_BASE (0x134 * 2)
1071#define T_BCN1_TPL_BASE (0x234 * 2)
1072#define T_TX_FIFO_TXRAM_BASE (T_ACTS_TPL_BASE + \
1073 (TXFIFO_START_BLK * TXFIFO_SIZE_UNIT))
1074
1075#define T_BA_TPL_BASE T_QNULL_TPL_BASE /* template area for BA */
1076
1077#define T_RAM_ACCESS_SZ 4 /* template ram is 4 byte access only */
1078
1079/* Shared Mem byte offsets */
1080
1081/* Location where the ucode expects the corerev */
1082#define M_MACHW_VER (0x00b * 2)
1083
1084/* Location where the ucode expects the MAC capabilities */
1085#define M_MACHW_CAP_L (0x060 * 2)
1086#define M_MACHW_CAP_H (0x061 * 2)
1087
1088/* WME shared memory */
1089#define M_EDCF_STATUS_OFF (0x007 * 2)
1090#define M_TXF_CUR_INDEX (0x018 * 2)
1091#define M_EDCF_QINFO (0x120 * 2)
1092
1093/* PS-mode related parameters */
1094#define M_DOT11_SLOT (0x008 * 2)
1095#define M_DOT11_DTIMPERIOD (0x009 * 2)
1096#define M_NOSLPZNATDTIM (0x026 * 2)
1097
1098/* Beacon-related parameters */
1099#define M_BCN0_FRM_BYTESZ (0x00c * 2) /* Bcn 0 template length */
1100#define M_BCN1_FRM_BYTESZ (0x00d * 2) /* Bcn 1 template length */
1101#define M_BCN_TXTSF_OFFSET (0x00e * 2)
1102#define M_TIMBPOS_INBEACON (0x00f * 2)
1103#define M_SFRMTXCNTFBRTHSD (0x022 * 2)
1104#define M_LFRMTXCNTFBRTHSD (0x023 * 2)
1105#define M_BCN_PCTLWD (0x02a * 2)
1106#define M_BCN_LI (0x05b * 2) /* beacon listen interval */
1107
1108/* MAX Rx Frame len */
1109#define M_MAXRXFRM_LEN (0x010 * 2)
1110
1111/* ACK/CTS related params */
1112#define M_RSP_PCTLWD (0x011 * 2)
1113
1114/* Hardware Power Control */
1115#define M_TXPWR_N (0x012 * 2)
1116#define M_TXPWR_TARGET (0x013 * 2)
1117#define M_TXPWR_MAX (0x014 * 2)
1118#define M_TXPWR_CUR (0x019 * 2)
1119
1120/* Rx-related parameters */
1121#define M_RX_PAD_DATA_OFFSET (0x01a * 2)
1122
1123/* WEP Shared mem data */
1124#define M_SEC_DEFIVLOC (0x01e * 2)
1125#define M_SEC_VALNUMSOFTMCHTA (0x01f * 2)
1126#define M_PHYVER (0x028 * 2)
1127#define M_PHYTYPE (0x029 * 2)
1128#define M_SECRXKEYS_PTR (0x02b * 2)
1129#define M_TKMICKEYS_PTR (0x059 * 2)
1130#define M_SECKINDXALGO_BLK (0x2ea * 2)
1131#define M_SECKINDXALGO_BLK_SZ 54
1132#define M_SECPSMRXTAMCH_BLK (0x2fa * 2)
1133#define M_TKIP_TSC_TTAK (0x18c * 2)
1134#define D11_MAX_KEY_SIZE 16
1135
1136#define M_MAX_ANTCNT (0x02e * 2) /* antenna swap threshold */
1137
1138/* Probe response related parameters */
1139#define M_SSIDLEN (0x024 * 2)
1140#define M_PRB_RESP_FRM_LEN (0x025 * 2)
1141#define M_PRS_MAXTIME (0x03a * 2)
1142#define M_SSID (0xb0 * 2)
1143#define M_CTXPRS_BLK (0xc0 * 2)
1144#define C_CTX_PCTLWD_POS (0x4 * 2)
1145
1146/* Delta between OFDM and CCK power in CCK power boost mode */
1147#define M_OFDM_OFFSET (0x027 * 2)
1148
1149/* TSSI for last 4 11b/g CCK packets transmitted */
1150#define M_B_TSSI_0 (0x02c * 2)
1151#define M_B_TSSI_1 (0x02d * 2)
1152
1153/* Host flags to turn on ucode options */
1154#define M_HOST_FLAGS1 (0x02f * 2)
1155#define M_HOST_FLAGS2 (0x030 * 2)
1156#define M_HOST_FLAGS3 (0x031 * 2)
1157#define M_HOST_FLAGS4 (0x03c * 2)
1158#define M_HOST_FLAGS5 (0x06a * 2)
1159#define M_HOST_FLAGS_SZ 16
1160
1161#define M_RADAR_REG (0x033 * 2)
1162
1163/* TSSI for last 4 11a OFDM packets transmitted */
1164#define M_A_TSSI_0 (0x034 * 2)
1165#define M_A_TSSI_1 (0x035 * 2)
1166
1167/* noise interference measurement */
1168#define M_NOISE_IF_COUNT (0x034 * 2)
1169#define M_NOISE_IF_TIMEOUT (0x035 * 2)
1170
1171#define M_RF_RX_SP_REG1 (0x036 * 2)
1172
1173/* TSSI for last 4 11g OFDM packets transmitted */
1174#define M_G_TSSI_0 (0x038 * 2)
1175#define M_G_TSSI_1 (0x039 * 2)
1176
1177/* Background noise measure */
1178#define M_JSSI_0 (0x44 * 2)
1179#define M_JSSI_1 (0x45 * 2)
1180#define M_JSSI_AUX (0x46 * 2)
1181
1182#define M_CUR_2050_RADIOCODE (0x47 * 2)
1183
1184/* TX fifo sizes */
1185#define M_FIFOSIZE0 (0x4c * 2)
1186#define M_FIFOSIZE1 (0x4d * 2)
1187#define M_FIFOSIZE2 (0x4e * 2)
1188#define M_FIFOSIZE3 (0x4f * 2)
1189#define D11_MAX_TX_FRMS 32 /* max frames allowed in tx fifo */
1190
1191/* Current channel number plus upper bits */
1192#define M_CURCHANNEL (0x50 * 2)
1193#define D11_CURCHANNEL_5G 0x0100;
1194#define D11_CURCHANNEL_40 0x0200;
1195#define D11_CURCHANNEL_MAX 0x00FF;
1196
1197/* last posted frameid on the bcmc fifo */
1198#define M_BCMC_FID (0x54 * 2)
1199#define INVALIDFID 0xffff
1200
1201/* extended beacon phyctl bytes for 11N */
1202#define M_BCN_PCTL1WD (0x058 * 2)
1203
1204/* idle busy ratio to duty_cycle requirement */
1205#define M_TX_IDLE_BUSY_RATIO_X_16_CCK (0x52 * 2)
1206#define M_TX_IDLE_BUSY_RATIO_X_16_OFDM (0x5A * 2)
1207
1208/* CW RSSI for LCNPHY */
1209#define M_LCN_RSSI_0 0x1332
1210#define M_LCN_RSSI_1 0x1338
1211#define M_LCN_RSSI_2 0x133e
1212#define M_LCN_RSSI_3 0x1344
1213
1214/* SNR for LCNPHY */
1215#define M_LCN_SNR_A_0 0x1334
1216#define M_LCN_SNR_B_0 0x1336
1217
1218#define M_LCN_SNR_A_1 0x133a
1219#define M_LCN_SNR_B_1 0x133c
1220
1221#define M_LCN_SNR_A_2 0x1340
1222#define M_LCN_SNR_B_2 0x1342
1223
1224#define M_LCN_SNR_A_3 0x1346
1225#define M_LCN_SNR_B_3 0x1348
1226
1227#define M_LCN_LAST_RESET (81*2)
1228#define M_LCN_LAST_LOC (63*2)
1229#define M_LCNPHY_RESET_STATUS (4902)
1230#define M_LCNPHY_DSC_TIME (0x98d*2)
1231#define M_LCNPHY_RESET_CNT_DSC (0x98b*2)
1232#define M_LCNPHY_RESET_CNT (0x98c*2)
1233
1234/* Rate table offsets */
1235#define M_RT_DIRMAP_A (0xe0 * 2)
1236#define M_RT_BBRSMAP_A (0xf0 * 2)
1237#define M_RT_DIRMAP_B (0x100 * 2)
1238#define M_RT_BBRSMAP_B (0x110 * 2)
1239
1240/* Rate table entry offsets */
1241#define M_RT_PRS_PLCP_POS 10
1242#define M_RT_PRS_DUR_POS 16
1243#define M_RT_OFDM_PCTL1_POS 18
1244
1245#define M_20IN40_IQ (0x380 * 2)
1246
1247/* SHM locations where ucode stores the current power index */
1248#define M_CURR_IDX1 (0x384 * 2)
1249#define M_CURR_IDX2 (0x387 * 2)
1250
1251#define M_BSCALE_ANT0 (0x5e * 2)
1252#define M_BSCALE_ANT1 (0x5f * 2)
1253
1254/* Antenna Diversity Testing */
1255#define M_MIMO_ANTSEL_RXDFLT (0x63 * 2)
1256#define M_ANTSEL_CLKDIV (0x61 * 2)
1257#define M_MIMO_ANTSEL_TXDFLT (0x64 * 2)
1258
1259#define M_MIMO_MAXSYM (0x5d * 2)
1260#define MIMO_MAXSYM_DEF 0x8000 /* 32k */
1261#define MIMO_MAXSYM_MAX 0xffff /* 64k */
1262
1263#define M_WATCHDOG_8TU (0x1e * 2)
1264#define WATCHDOG_8TU_DEF 5
1265#define WATCHDOG_8TU_MAX 10
1266
1267/* Manufacturing Test Variables */
1268/* PER test mode */
1269#define M_PKTENG_CTRL (0x6c * 2)
1270/* IFS for TX mode */
1271#define M_PKTENG_IFS (0x6d * 2)
1272/* Lower word of tx frmcnt/rx lostcnt */
1273#define M_PKTENG_FRMCNT_LO (0x6e * 2)
1274/* Upper word of tx frmcnt/rx lostcnt */
1275#define M_PKTENG_FRMCNT_HI (0x6f * 2)
1276
1277/* Index variation in vbat ripple */
1278#define M_LCN_PWR_IDX_MAX (0x67 * 2) /* highest index read by ucode */
1279#define M_LCN_PWR_IDX_MIN (0x66 * 2) /* lowest index read by ucode */
1280
1281/* M_PKTENG_CTRL bit definitions */
1282#define M_PKTENG_MODE_TX 0x0001
1283#define M_PKTENG_MODE_TX_RIFS 0x0004
1284#define M_PKTENG_MODE_TX_CTS 0x0008
1285#define M_PKTENG_MODE_RX 0x0002
1286#define M_PKTENG_MODE_RX_WITH_ACK 0x0402
1287#define M_PKTENG_MODE_MASK 0x0003
1288/* TX frames indicated in the frmcnt reg */
1289#define M_PKTENG_FRMCNT_VLD 0x0100
1290
1291/* Sample Collect parameters (bitmap and type) */
1292/* Trigger bitmap for sample collect */
1293#define M_SMPL_COL_BMP (0x37d * 2)
1294/* Sample collect type */
1295#define M_SMPL_COL_CTL (0x3b2 * 2)
1296
1297#define ANTSEL_CLKDIV_4MHZ 6
1298#define MIMO_ANTSEL_BUSY 0x4000 /* bit 14 (busy) */
1299#define MIMO_ANTSEL_SEL 0x8000 /* bit 15 write the value */
1300#define MIMO_ANTSEL_WAIT 50 /* 50us wait */
1301#define MIMO_ANTSEL_OVERRIDE 0x8000 /* flag */
1302
1303struct shm_acparams {
1304 u16 txop;
1305 u16 cwmin;
1306 u16 cwmax;
1307 u16 cwcur;
1308 u16 aifs;
1309 u16 bslots;
1310 u16 reggap;
1311 u16 status;
1312 u16 rsvd[8];
1313} __packed;
1314#define M_EDCF_QLEN (16 * 2)
1315
1316#define WME_STATUS_NEWAC (1 << 8)
1317
1318/* M_HOST_FLAGS */
1319#define MHFMAX 5 /* Number of valid hostflag half-word (u16) */
1320#define MHF1 0 /* Hostflag 1 index */
1321#define MHF2 1 /* Hostflag 2 index */
1322#define MHF3 2 /* Hostflag 3 index */
1323#define MHF4 3 /* Hostflag 4 index */
1324#define MHF5 4 /* Hostflag 5 index */
1325
1326/* Flags in M_HOST_FLAGS */
1327/* Enable ucode antenna diversity help */
1328#define MHF1_ANTDIV 0x0001
1329/* Enable EDCF access control */
1330#define MHF1_EDCF 0x0100
1331#define MHF1_IQSWAP_WAR 0x0200
1332/* Disable Slow clock request, for corerev < 11 */
1333#define MHF1_FORCEFASTCLK 0x0400
1334
1335/* Flags in M_HOST_FLAGS2 */
1336
1337/* Flush BCMC FIFO immediately */
1338#define MHF2_TXBCMC_NOW 0x0040
1339/* Enable ucode/hw power control */
1340#define MHF2_HWPWRCTL 0x0080
1341#define MHF2_NPHY40MHZ_WAR 0x0800
1342
1343/* Flags in M_HOST_FLAGS3 */
1344/* enabled mimo antenna selection */
1345#define MHF3_ANTSEL_EN 0x0001
1346/* antenna selection mode: 0: 2x3, 1: 2x4 */
1347#define MHF3_ANTSEL_MODE 0x0002
1348#define MHF3_RESERVED1 0x0004
1349#define MHF3_RESERVED2 0x0008
1350#define MHF3_NPHY_MLADV_WAR 0x0010
1351
1352/* Flags in M_HOST_FLAGS4 */
1353/* force bphy Tx on core 0 (board level WAR) */
1354#define MHF4_BPHY_TXCORE0 0x0080
1355/* for 4313A0 FEM boards */
1356#define MHF4_EXTPA_ENABLE 0x4000
1357
1358/* Flags in M_HOST_FLAGS5 */
1359#define MHF5_4313_GPIOCTRL 0x0001
1360#define MHF5_RESERVED1 0x0002
1361#define MHF5_RESERVED2 0x0004
1362/* Radio power setting for ucode */
1363#define M_RADIO_PWR (0x32 * 2)
1364
1365/* phy noise recorded by ucode right after tx */
1366#define M_PHY_NOISE (0x037 * 2)
1367#define PHY_NOISE_MASK 0x00ff
1368
1369/*
1370 * Receive Frame Data Header for 802.11b DCF-only frames
1371 *
1372 * RxFrameSize: Actual byte length of the frame data received
1373 * PAD: padding (not used)
1374 * PhyRxStatus_0: PhyRxStatus 15:0
1375 * PhyRxStatus_1: PhyRxStatus 31:16
1376 * PhyRxStatus_2: PhyRxStatus 47:32
1377 * PhyRxStatus_3: PhyRxStatus 63:48
1378 * PhyRxStatus_4: PhyRxStatus 79:64
1379 * PhyRxStatus_5: PhyRxStatus 95:80
1380 * RxStatus1: MAC Rx Status
1381 * RxStatus2: extended MAC Rx status
1382 * RxTSFTime: RxTSFTime time of first MAC symbol + M_PHY_PLCPRX_DLY
1383 * RxChan: gain code, channel radio code, and phy type
1384 */
1385struct d11rxhdr_le {
1386 __le16 RxFrameSize;
1387 u16 PAD;
1388 __le16 PhyRxStatus_0;
1389 __le16 PhyRxStatus_1;
1390 __le16 PhyRxStatus_2;
1391 __le16 PhyRxStatus_3;
1392 __le16 PhyRxStatus_4;
1393 __le16 PhyRxStatus_5;
1394 __le16 RxStatus1;
1395 __le16 RxStatus2;
1396 __le16 RxTSFTime;
1397 __le16 RxChan;
1398} __packed;
1399
1400struct d11rxhdr {
1401 u16 RxFrameSize;
1402 u16 PAD;
1403 u16 PhyRxStatus_0;
1404 u16 PhyRxStatus_1;
1405 u16 PhyRxStatus_2;
1406 u16 PhyRxStatus_3;
1407 u16 PhyRxStatus_4;
1408 u16 PhyRxStatus_5;
1409 u16 RxStatus1;
1410 u16 RxStatus2;
1411 u16 RxTSFTime;
1412 u16 RxChan;
1413} __packed;
1414
1415/* PhyRxStatus_0: */
1416/* NPHY only: CCK, OFDM, preN, N */
1417#define PRXS0_FT_MASK 0x0003
1418/* NPHY only: clip count adjustment steps by AGC */
1419#define PRXS0_CLIP_MASK 0x000C
1420#define PRXS0_CLIP_SHIFT 2
1421/* PHY received a frame with unsupported rate */
1422#define PRXS0_UNSRATE 0x0010
1423/* GPHY: rx ant, NPHY: upper sideband */
1424#define PRXS0_RXANT_UPSUBBAND 0x0020
1425/* CCK frame only: lost crs during cck frame reception */
1426#define PRXS0_LCRS 0x0040
1427/* Short Preamble */
1428#define PRXS0_SHORTH 0x0080
1429/* PLCP violation */
1430#define PRXS0_PLCPFV 0x0100
1431/* PLCP header integrity check failed */
1432#define PRXS0_PLCPHCF 0x0200
1433/* legacy PHY gain control */
1434#define PRXS0_GAIN_CTL 0x4000
1435/* NPHY: Antennas used for received frame, bitmask */
1436#define PRXS0_ANTSEL_MASK 0xF000
1437#define PRXS0_ANTSEL_SHIFT 0x12
1438
1439/* subfield PRXS0_FT_MASK */
1440#define PRXS0_CCK 0x0000
1441/* valid only for G phy, use rxh->RxChan for A phy */
1442#define PRXS0_OFDM 0x0001
1443#define PRXS0_PREN 0x0002
1444#define PRXS0_STDN 0x0003
1445
1446/* subfield PRXS0_ANTSEL_MASK */
1447#define PRXS0_ANTSEL_0 0x0 /* antenna 0 is used */
1448#define PRXS0_ANTSEL_1 0x2 /* antenna 1 is used */
1449#define PRXS0_ANTSEL_2 0x4 /* antenna 2 is used */
1450#define PRXS0_ANTSEL_3 0x8 /* antenna 3 is used */
1451
1452/* PhyRxStatus_1: */
1453#define PRXS1_JSSI_MASK 0x00FF
1454#define PRXS1_JSSI_SHIFT 0
1455#define PRXS1_SQ_MASK 0xFF00
1456#define PRXS1_SQ_SHIFT 8
1457
1458/* nphy PhyRxStatus_1: */
1459#define PRXS1_nphy_PWR0_MASK 0x00FF
1460#define PRXS1_nphy_PWR1_MASK 0xFF00
1461
1462/* HTPHY Rx Status defines */
1463/* htphy PhyRxStatus_0: those bit are overlapped with PhyRxStatus_0 */
1464#define PRXS0_BAND 0x0400 /* 0 = 2.4G, 1 = 5G */
1465#define PRXS0_RSVD 0x0800 /* reserved; set to 0 */
1466#define PRXS0_UNUSED 0xF000 /* unused and not defined; set to 0 */
1467
1468/* htphy PhyRxStatus_1: */
1469/* core enables for {3..0}, 0=disabled, 1=enabled */
1470#define PRXS1_HTPHY_CORE_MASK 0x000F
1471/* antenna configation */
1472#define PRXS1_HTPHY_ANTCFG_MASK 0x00F0
1473/* Mixmode PLCP Length low byte mask */
1474#define PRXS1_HTPHY_MMPLCPLenL_MASK 0xFF00
1475
1476/* htphy PhyRxStatus_2: */
1477/* Mixmode PLCP Length high byte maskw */
1478#define PRXS2_HTPHY_MMPLCPLenH_MASK 0x000F
1479/* Mixmode PLCP rate mask */
1480#define PRXS2_HTPHY_MMPLCH_RATE_MASK 0x00F0
1481/* Rx power on core 0 */
1482#define PRXS2_HTPHY_RXPWR_ANT0 0xFF00
1483
1484/* htphy PhyRxStatus_3: */
1485/* Rx power on core 1 */
1486#define PRXS3_HTPHY_RXPWR_ANT1 0x00FF
1487/* Rx power on core 2 */
1488#define PRXS3_HTPHY_RXPWR_ANT2 0xFF00
1489
1490/* htphy PhyRxStatus_4: */
1491/* Rx power on core 3 */
1492#define PRXS4_HTPHY_RXPWR_ANT3 0x00FF
1493/* Coarse frequency offset */
1494#define PRXS4_HTPHY_CFO 0xFF00
1495
1496/* htphy PhyRxStatus_5: */
1497/* Fine frequency offset */
1498#define PRXS5_HTPHY_FFO 0x00FF
1499/* Advance Retard */
1500#define PRXS5_HTPHY_AR 0xFF00
1501
1502#define HTPHY_MMPLCPLen(rxs) \
1503 ((((rxs)->PhyRxStatus_1 & PRXS1_HTPHY_MMPLCPLenL_MASK) >> 8) | \
1504 (((rxs)->PhyRxStatus_2 & PRXS2_HTPHY_MMPLCPLenH_MASK) << 8))
1505/* Get Rx power on core 0 */
1506#define HTPHY_RXPWR_ANT0(rxs) \
1507 ((((rxs)->PhyRxStatus_2) & PRXS2_HTPHY_RXPWR_ANT0) >> 8)
1508/* Get Rx power on core 1 */
1509#define HTPHY_RXPWR_ANT1(rxs) \
1510 (((rxs)->PhyRxStatus_3) & PRXS3_HTPHY_RXPWR_ANT1)
1511/* Get Rx power on core 2 */
1512#define HTPHY_RXPWR_ANT2(rxs) \
1513 ((((rxs)->PhyRxStatus_3) & PRXS3_HTPHY_RXPWR_ANT2) >> 8)
1514
1515/* ucode RxStatus1: */
1516#define RXS_BCNSENT 0x8000
1517#define RXS_SECKINDX_MASK 0x07e0
1518#define RXS_SECKINDX_SHIFT 5
1519#define RXS_DECERR (1 << 4)
1520#define RXS_DECATMPT (1 << 3)
1521/* PAD bytes to make IP data 4 bytes aligned */
1522#define RXS_PBPRES (1 << 2)
1523#define RXS_RESPFRAMETX (1 << 1)
1524#define RXS_FCSERR (1 << 0)
1525
1526/* ucode RxStatus2: */
1527#define RXS_AMSDU_MASK 1
1528#define RXS_AGGTYPE_MASK 0x6
1529#define RXS_AGGTYPE_SHIFT 1
1530#define RXS_PHYRXST_VALID (1 << 8)
1531#define RXS_RXANT_MASK 0x3
1532#define RXS_RXANT_SHIFT 12
1533
1534/* RxChan */
1535#define RXS_CHAN_40 0x1000
1536#define RXS_CHAN_5G 0x0800
1537#define RXS_CHAN_ID_MASK 0x07f8
1538#define RXS_CHAN_ID_SHIFT 3
1539#define RXS_CHAN_PHYTYPE_MASK 0x0007
1540#define RXS_CHAN_PHYTYPE_SHIFT 0
1541
1542/* Index of attenuations used during ucode power control. */
1543#define M_PWRIND_BLKS (0x184 * 2)
1544#define M_PWRIND_MAP0 (M_PWRIND_BLKS + 0x0)
1545#define M_PWRIND_MAP1 (M_PWRIND_BLKS + 0x2)
1546#define M_PWRIND_MAP2 (M_PWRIND_BLKS + 0x4)
1547#define M_PWRIND_MAP3 (M_PWRIND_BLKS + 0x6)
1548/* M_PWRIND_MAP(core) macro */
1549#define M_PWRIND_MAP(core) (M_PWRIND_BLKS + ((core)<<1))
1550
1551/* PSM SHM variable offsets */
1552#define M_PSM_SOFT_REGS 0x0
1553#define M_BOM_REV_MAJOR (M_PSM_SOFT_REGS + 0x0)
1554#define M_BOM_REV_MINOR (M_PSM_SOFT_REGS + 0x2)
1555#define M_UCODE_DBGST (M_PSM_SOFT_REGS + 0x40) /* ucode debug status code */
1556#define M_UCODE_MACSTAT (M_PSM_SOFT_REGS + 0xE0) /* macstat counters */
1557
1558#define M_AGING_THRSH (0x3e * 2) /* max time waiting for medium before tx */
1559#define M_MBURST_SIZE (0x40 * 2) /* max frames in a frameburst */
1560#define M_MBURST_TXOP (0x41 * 2) /* max frameburst TXOP in unit of us */
1561#define M_SYNTHPU_DLY (0x4a * 2) /* pre-wakeup for synthpu, default: 500 */
1562#define M_PRETBTT (0x4b * 2)
1563
1564/* offset to the target txpwr */
1565#define M_ALT_TXPWR_IDX (M_PSM_SOFT_REGS + (0x3b * 2))
1566#define M_PHY_TX_FLT_PTR (M_PSM_SOFT_REGS + (0x3d * 2))
1567#define M_CTS_DURATION (M_PSM_SOFT_REGS + (0x5c * 2))
1568#define M_LP_RCCAL_OVR (M_PSM_SOFT_REGS + (0x6b * 2))
1569
1570/* PKTENG Rx Stats Block */
1571#define M_RXSTATS_BLK_PTR (M_PSM_SOFT_REGS + (0x65 * 2))
1572
1573/* ucode debug status codes */
1574/* not valid really */
1575#define DBGST_INACTIVE 0
1576/* after zeroing SHM, before suspending at init */
1577#define DBGST_INIT 1
1578/* "normal" state */
1579#define DBGST_ACTIVE 2
1580/* suspended */
1581#define DBGST_SUSPENDED 3
1582/* asleep (PS mode) */
1583#define DBGST_ASLEEP 4
1584
1585/* Scratch Reg defs */
1586enum _ePsmScratchPadRegDefinitions {
1587 S_RSV0 = 0,
1588 S_RSV1,
1589 S_RSV2,
1590
1591 /* offset 0x03: scratch registers for Dot11-contants */
1592 S_DOT11_CWMIN, /* CW-minimum */
1593 S_DOT11_CWMAX, /* CW-maximum */
1594 S_DOT11_CWCUR, /* CW-current */
1595 S_DOT11_SRC_LMT, /* short retry count limit */
1596 S_DOT11_LRC_LMT, /* long retry count limit */
1597 S_DOT11_DTIMCOUNT, /* DTIM-count */
1598
1599 /* offset 0x09: Tx-side scratch registers */
1600 S_SEQ_NUM, /* hardware sequence number reg */
1601 S_SEQ_NUM_FRAG, /* seq num for frags (at the start of MSDU) */
1602 S_FRMRETX_CNT, /* frame retx count */
1603 S_SSRC, /* Station short retry count */
1604 S_SLRC, /* Station long retry count */
1605 S_EXP_RSP, /* Expected response frame */
1606 S_OLD_BREM, /* Remaining backoff ctr */
1607 S_OLD_CWWIN, /* saved-off CW-cur */
1608 S_TXECTL, /* TXE-Ctl word constructed in scr-pad */
1609 S_CTXTST, /* frm type-subtype as read from Tx-descr */
1610
1611 /* offset 0x13: Rx-side scratch registers */
1612 S_RXTST, /* Type and subtype in Rxframe */
1613
1614 /* Global state register */
1615 S_STREG, /* state storage actual bit maps below */
1616
1617 S_TXPWR_SUM, /* Tx power control: accumulator */
1618 S_TXPWR_ITER, /* Tx power control: iteration */
1619 S_RX_FRMTYPE, /* Rate and PHY type for frames */
1620 S_THIS_AGG, /* Size of this AGG (A-MSDU) */
1621
1622 S_KEYINDX,
1623 S_RXFRMLEN, /* Receive MPDU length in bytes */
1624
1625 /* offset 0x1B: Receive TSF time stored in SCR */
1626 S_RXTSFTMRVAL_WD3, /* TSF value at the start of rx */
1627 S_RXTSFTMRVAL_WD2, /* TSF value at the start of rx */
1628 S_RXTSFTMRVAL_WD1, /* TSF value at the start of rx */
1629 S_RXTSFTMRVAL_WD0, /* TSF value at the start of rx */
1630 S_RXSSN, /* Received start seq number for A-MPDU BA */
1631 S_RXQOSFLD, /* Rx-QoS field (if present) */
1632
1633 /* offset 0x21: Scratch pad regs used in microcode as temp storage */
1634 S_TMP0, /* stmp0 */
1635 S_TMP1, /* stmp1 */
1636 S_TMP2, /* stmp2 */
1637 S_TMP3, /* stmp3 */
1638 S_TMP4, /* stmp4 */
1639 S_TMP5, /* stmp5 */
1640 S_PRQPENALTY_CTR, /* Probe response queue penalty counter */
1641 S_ANTCNT, /* unsuccessful attempts on current ant. */
1642 S_SYMBOL, /* flag for possible symbol ctl frames */
1643 S_RXTP, /* rx frame type */
1644 S_STREG2, /* extra state storage */
1645 S_STREG3, /* even more extra state storage */
1646 S_STREG4, /* ... */
1647 S_STREG5, /* remember to initialize it to zero */
1648
1649 S_ADJPWR_IDX,
1650 S_CUR_PTR, /* Temp pointer for A-MPDU re-Tx SHM table */
1651 S_REVID4, /* 0x33 */
1652 S_INDX, /* 0x34 */
1653 S_ADDR0, /* 0x35 */
1654 S_ADDR1, /* 0x36 */
1655 S_ADDR2, /* 0x37 */
1656 S_ADDR3, /* 0x38 */
1657 S_ADDR4, /* 0x39 */
1658 S_ADDR5, /* 0x3A */
1659 S_TMP6, /* 0x3B */
1660 S_KEYINDX_BU, /* Backup for Key index */
1661 S_MFGTEST_TMP0, /* Temp regs used for RX test calculations */
1662 S_RXESN, /* Received end sequence number for A-MPDU BA */
1663 S_STREG6, /* 0x3F */
1664};
1665
1666#define S_BEACON_INDX S_OLD_BREM
1667#define S_PRS_INDX S_OLD_CWWIN
1668#define S_PHYTYPE S_SSRC
1669#define S_PHYVER S_SLRC
1670
1671/* IHR SLOW_CTRL values */
1672#define SLOW_CTRL_PDE (1 << 0)
1673#define SLOW_CTRL_FD (1 << 8)
1674
1675/* ucode mac statistic counters in shared memory */
1676struct macstat {
1677 u16 txallfrm; /* 0x80 */
1678 u16 txrtsfrm; /* 0x82 */
1679 u16 txctsfrm; /* 0x84 */
1680 u16 txackfrm; /* 0x86 */
1681 u16 txdnlfrm; /* 0x88 */
1682 u16 txbcnfrm; /* 0x8a */
1683 u16 txfunfl[8]; /* 0x8c - 0x9b */
1684 u16 txtplunfl; /* 0x9c */
1685 u16 txphyerr; /* 0x9e */
1686 u16 pktengrxducast; /* 0xa0 */
1687 u16 pktengrxdmcast; /* 0xa2 */
1688 u16 rxfrmtoolong; /* 0xa4 */
1689 u16 rxfrmtooshrt; /* 0xa6 */
1690 u16 rxinvmachdr; /* 0xa8 */
1691 u16 rxbadfcs; /* 0xaa */
1692 u16 rxbadplcp; /* 0xac */
1693 u16 rxcrsglitch; /* 0xae */
1694 u16 rxstrt; /* 0xb0 */
1695 u16 rxdfrmucastmbss; /* 0xb2 */
1696 u16 rxmfrmucastmbss; /* 0xb4 */
1697 u16 rxcfrmucast; /* 0xb6 */
1698 u16 rxrtsucast; /* 0xb8 */
1699 u16 rxctsucast; /* 0xba */
1700 u16 rxackucast; /* 0xbc */
1701 u16 rxdfrmocast; /* 0xbe */
1702 u16 rxmfrmocast; /* 0xc0 */
1703 u16 rxcfrmocast; /* 0xc2 */
1704 u16 rxrtsocast; /* 0xc4 */
1705 u16 rxctsocast; /* 0xc6 */
1706 u16 rxdfrmmcast; /* 0xc8 */
1707 u16 rxmfrmmcast; /* 0xca */
1708 u16 rxcfrmmcast; /* 0xcc */
1709 u16 rxbeaconmbss; /* 0xce */
1710 u16 rxdfrmucastobss; /* 0xd0 */
1711 u16 rxbeaconobss; /* 0xd2 */
1712 u16 rxrsptmout; /* 0xd4 */
1713 u16 bcntxcancl; /* 0xd6 */
1714 u16 PAD;
1715 u16 rxf0ovfl; /* 0xda */
1716 u16 rxf1ovfl; /* 0xdc */
1717 u16 rxf2ovfl; /* 0xde */
1718 u16 txsfovfl; /* 0xe0 */
1719 u16 pmqovfl; /* 0xe2 */
1720 u16 rxcgprqfrm; /* 0xe4 */
1721 u16 rxcgprsqovfl; /* 0xe6 */
1722 u16 txcgprsfail; /* 0xe8 */
1723 u16 txcgprssuc; /* 0xea */
1724 u16 prs_timeout; /* 0xec */
1725 u16 rxnack;
1726 u16 frmscons;
1727 u16 txnack;
1728 u16 txglitch_nack;
1729 u16 txburst; /* 0xf6 # tx bursts */
1730 u16 bphy_rxcrsglitch; /* bphy rx crs glitch */
1731 u16 phywatchdog; /* 0xfa # of phy watchdog events */
1732 u16 PAD;
1733 u16 bphy_badplcp; /* bphy bad plcp */
1734};
1735
1736/* dot11 core-specific control flags */
1737#define SICF_PCLKE 0x0004 /* PHY clock enable */
1738#define SICF_PRST 0x0008 /* PHY reset */
1739#define SICF_MPCLKE 0x0010 /* MAC PHY clockcontrol enable */
1740#define SICF_FREF 0x0020 /* PLL FreqRefSelect */
1741/* NOTE: the following bw bits only apply when the core is attached
1742 * to a NPHY
1743 */
1744#define SICF_BWMASK 0x00c0 /* phy clock mask (b6 & b7) */
1745#define SICF_BW40 0x0080 /* 40MHz BW (160MHz phyclk) */
1746#define SICF_BW20 0x0040 /* 20MHz BW (80MHz phyclk) */
1747#define SICF_BW10 0x0000 /* 10MHz BW (40MHz phyclk) */
1748#define SICF_GMODE 0x2000 /* gmode enable */
1749
1750/* dot11 core-specific status flags */
1751#define SISF_2G_PHY 0x0001 /* 2.4G capable phy */
1752#define SISF_5G_PHY 0x0002 /* 5G capable phy */
1753#define SISF_FCLKA 0x0004 /* FastClkAvailable */
1754#define SISF_DB_PHY 0x0008 /* Dualband phy */
1755
1756/* === End of MAC reg, Beginning of PHY(b/a/g/n) reg === */
1757/* radio and LPPHY regs are separated */
1758
1759#define BPHY_REG_OFT_BASE 0x0
1760/* offsets for indirect access to bphy registers */
1761#define BPHY_BB_CONFIG 0x01
1762#define BPHY_ADCBIAS 0x02
1763#define BPHY_ANACORE 0x03
1764#define BPHY_PHYCRSTH 0x06
1765#define BPHY_TEST 0x0a
1766#define BPHY_PA_TX_TO 0x10
1767#define BPHY_SYNTH_DC_TO 0x11
1768#define BPHY_PA_TX_TIME_UP 0x12
1769#define BPHY_RX_FLTR_TIME_UP 0x13
1770#define BPHY_TX_POWER_OVERRIDE 0x14
1771#define BPHY_RF_OVERRIDE 0x15
1772#define BPHY_RF_TR_LOOKUP1 0x16
1773#define BPHY_RF_TR_LOOKUP2 0x17
1774#define BPHY_COEFFS 0x18
1775#define BPHY_PLL_OUT 0x19
1776#define BPHY_REFRESH_MAIN 0x1a
1777#define BPHY_REFRESH_TO0 0x1b
1778#define BPHY_REFRESH_TO1 0x1c
1779#define BPHY_RSSI_TRESH 0x20
1780#define BPHY_IQ_TRESH_HH 0x21
1781#define BPHY_IQ_TRESH_H 0x22
1782#define BPHY_IQ_TRESH_L 0x23
1783#define BPHY_IQ_TRESH_LL 0x24
1784#define BPHY_GAIN 0x25
1785#define BPHY_LNA_GAIN_RANGE 0x26
1786#define BPHY_JSSI 0x27
1787#define BPHY_TSSI_CTL 0x28
1788#define BPHY_TSSI 0x29
1789#define BPHY_TR_LOSS_CTL 0x2a
1790#define BPHY_LO_LEAKAGE 0x2b
1791#define BPHY_LO_RSSI_ACC 0x2c
1792#define BPHY_LO_IQMAG_ACC 0x2d
1793#define BPHY_TX_DC_OFF1 0x2e
1794#define BPHY_TX_DC_OFF2 0x2f
1795#define BPHY_PEAK_CNT_THRESH 0x30
1796#define BPHY_FREQ_OFFSET 0x31
1797#define BPHY_DIVERSITY_CTL 0x32
1798#define BPHY_PEAK_ENERGY_LO 0x33
1799#define BPHY_PEAK_ENERGY_HI 0x34
1800#define BPHY_SYNC_CTL 0x35
1801#define BPHY_TX_PWR_CTRL 0x36
1802#define BPHY_TX_EST_PWR 0x37
1803#define BPHY_STEP 0x38
1804#define BPHY_WARMUP 0x39
1805#define BPHY_LMS_CFF_READ 0x3a
1806#define BPHY_LMS_COEFF_I 0x3b
1807#define BPHY_LMS_COEFF_Q 0x3c
1808#define BPHY_SIG_POW 0x3d
1809#define BPHY_RFDC_CANCEL_CTL 0x3e
1810#define BPHY_HDR_TYPE 0x40
1811#define BPHY_SFD_TO 0x41
1812#define BPHY_SFD_CTL 0x42
1813#define BPHY_DEBUG 0x43
1814#define BPHY_RX_DELAY_COMP 0x44
1815#define BPHY_CRS_DROP_TO 0x45
1816#define BPHY_SHORT_SFD_NZEROS 0x46
1817#define BPHY_DSSS_COEFF1 0x48
1818#define BPHY_DSSS_COEFF2 0x49
1819#define BPHY_CCK_COEFF1 0x4a
1820#define BPHY_CCK_COEFF2 0x4b
1821#define BPHY_TR_CORR 0x4c
1822#define BPHY_ANGLE_SCALE 0x4d
1823#define BPHY_TX_PWR_BASE_IDX 0x4e
1824#define BPHY_OPTIONAL_MODES2 0x4f
1825#define BPHY_CCK_LMS_STEP 0x50
1826#define BPHY_BYPASS 0x51
1827#define BPHY_CCK_DELAY_LONG 0x52
1828#define BPHY_CCK_DELAY_SHORT 0x53
1829#define BPHY_PPROC_CHAN_DELAY 0x54
1830#define BPHY_DDFS_ENABLE 0x58
1831#define BPHY_PHASE_SCALE 0x59
1832#define BPHY_FREQ_CONTROL 0x5a
1833#define BPHY_LNA_GAIN_RANGE_10 0x5b
1834#define BPHY_LNA_GAIN_RANGE_32 0x5c
1835#define BPHY_OPTIONAL_MODES 0x5d
1836#define BPHY_RX_STATUS2 0x5e
1837#define BPHY_RX_STATUS3 0x5f
1838#define BPHY_DAC_CONTROL 0x60
1839#define BPHY_ANA11G_FILT_CTRL 0x62
1840#define BPHY_REFRESH_CTRL 0x64
1841#define BPHY_RF_OVERRIDE2 0x65
1842#define BPHY_SPUR_CANCEL_CTRL 0x66
1843#define BPHY_FINE_DIGIGAIN_CTRL 0x67
1844#define BPHY_RSSI_LUT 0x88
1845#define BPHY_RSSI_LUT_END 0xa7
1846#define BPHY_TSSI_LUT 0xa8
1847#define BPHY_TSSI_LUT_END 0xc7
1848#define BPHY_TSSI2PWR_LUT 0x380
1849#define BPHY_TSSI2PWR_LUT_END 0x39f
1850#define BPHY_LOCOMP_LUT 0x3a0
1851#define BPHY_LOCOMP_LUT_END 0x3bf
1852#define BPHY_TXGAIN_LUT 0x3c0
1853#define BPHY_TXGAIN_LUT_END 0x3ff
1854
1855/* Bits in BB_CONFIG: */
1856#define PHY_BBC_ANT_MASK 0x0180
1857#define PHY_BBC_ANT_SHIFT 7
1858#define BB_DARWIN 0x1000
1859#define BBCFG_RESETCCA 0x4000
1860#define BBCFG_RESETRX 0x8000
1861
1862/* Bits in phytest(0x0a): */
1863#define TST_DDFS 0x2000
1864#define TST_TXFILT1 0x0800
1865#define TST_UNSCRAM 0x0400
1866#define TST_CARR_SUPP 0x0200
1867#define TST_DC_COMP_LOOP 0x0100
1868#define TST_LOOPBACK 0x0080
1869#define TST_TXFILT0 0x0040
1870#define TST_TXTEST_ENABLE 0x0020
1871#define TST_TXTEST_RATE 0x0018
1872#define TST_TXTEST_PHASE 0x0007
1873
1874/* phytest txTestRate values */
1875#define TST_TXTEST_RATE_1MBPS 0
1876#define TST_TXTEST_RATE_2MBPS 1
1877#define TST_TXTEST_RATE_5_5MBPS 2
1878#define TST_TXTEST_RATE_11MBPS 3
1879#define TST_TXTEST_RATE_SHIFT 3
1880
1881#define SHM_BYT_CNT 0x2 /* IHR location */
1882#define MAX_BYT_CNT 0x600 /* Maximum frame len */
1883
1884struct d11cnt {
1885 u32 txfrag;
1886 u32 txmulti;
1887 u32 txfail;
1888 u32 txretry;
1889 u32 txretrie;
1890 u32 rxdup;
1891 u32 txrts;
1892 u32 txnocts;
1893 u32 txnoack;
1894 u32 rxfrag;
1895 u32 rxmulti;
1896 u32 rxcrc;
1897 u32 txfrmsnt;
1898 u32 rxundec;
1899};
1900
1901#endif /* _BRCM_D11_H_ */
Linux kernel - Deliverables
This page took 0.168592 seconds and 5 git commands to generate.